visable.png

Skip headerimage
ManualsContentsPreviousNextHelp

Erase Center / Border (same width)

Erases both the center and edge margins of the original image.

  1. Press [Edit / Stamp].

    Operation panel screen illustration

  2. Press [Erase].

  3. Press [Erase Center / Border].

  4. Press [Erase Center / Border].

  5. Press [Same Width].

  6. Press [Center], and then specify the erase width with [Plus] and [Minus].

    Operation panel screen illustration

    Pressing [Plus] or [Minus] changes the width in increments of 1 mm (0.1 inch). Pressing and holding down the relevant key changes the width in increments of 10 mm (1 inch).

  7. Press [Border], and then specify the erase width with [Plus] and [Minus].

    Pressing [Plus] or [Minus] changes the width in increments of 1 mm (0.1 inch). Pressing and holding down the relevant key changes the width in increments of 10 mm (1 inch).

  8. Press [OK] twice.

Note