Acceptable Original Sizes

This section describes the size and thickness limitations that apply to originals placed on the exposure glass or the ADF.

Where original is set	Acceptable original size	Maximum number of sheets	Paper thickness
Exposure glass	Up to A3 (297 × 420 mm), 11 × 17 (279 × 432 mm)	1 sheet
ADF, one-sided original	B6 to A3 (up to 1200 mm long) 8¹/₂ × 11 to 11 × 17	250 sheets: Less than 69 g/m² (18 lb. Bond)*1 150 sheets: Less than 80 g/m² (20 lb. Bond)	40-128 g/m² (11-34 lb. Bond)
ADF, two-sided original	A5 to A3 (up to 432 mm long) 8¹/₂ × 11 to 11 × 17	250 sheets: Less than 69 g/m² (18 lb. Bond)*1 150 sheets: Less than 80 g/m² (20 lb. Bond)	52-128 g/m² (14-34 lb. Bond)

Where original is set

Acceptable original size

Maximum number of sheets

Paper thickness

Exposure glass

Up to A3 (297 × 420 mm),

11 × 17 (279 × 432 mm)

1 sheet

ADF, one-sided original

B6 to A3

(up to 1200 mm long)

8¹/₂ × 11 to 11 × 17

250 sheets: Less than 69 g/m² (18 lb. Bond)*1

150 sheets: Less than 80 g/m² (20 lb. Bond)

40-128 g/m² (11-34 lb. Bond)

ADF, two-sided original

A5 to A3

(up to 432 mm long)

8¹/₂ × 11 to 11 × 17

250 sheets: Less than 69 g/m² (18 lb. Bond)*1

150 sheets: Less than 80 g/m² (20 lb. Bond)

52-128 g/m² (14-34 lb. Bond)

*1 Above specification depends on the paper type and condition

The weight range for originals in the Mixed Original Sizes mode is 52 - 81 g/m² (14 - 20 lb. Bond).
You can use documents longer than 600 mm with the User Parameter (switch 14, bit 1) in the Parameter Setting. For details about Parameter Setting, see "Parameter Settings".