   |  |  | |
 | |||
 | |||
 |  |  |  |
 |   Manuals Contents Previous Next |   | |
This section introduces the names and functions of the components.
Do not obstruct the ventilation holes by placing objects near them or leaning things against them. If the machine overheats, a fault might occur.
Auto document feeder (ADF)
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.
This document feeder can be used for two-sided originals.
Exposure glass
Place originals face down here.
Copy tray (optional)
Copied/printed paper and fax messages are delivered here.
Main power switch
If the machine does not operate after turning on the operation switch, check if the main power switch is turned on. If it is off, turn it on.
See "Turning On/Off the Power".
Operation switch
Press to turn the power on (the operation switch indicator lights up). To turn the power off, press again (the operation switch indicator goes off).
See "Turning On/Off the Power".
Control panel
See "Control Panel".
Front cover
Open to access the inside of the machine.
Paper trays (Trays 1-3)
Load paper here.
Tray 1 is a tandem tray where paper on the left side automatically moves to the right when paper there has run out.
Bypass tray
Use to print on OHP transparencies, label paper (adhesive labels), translucent paper, postcards and custom size paper.
Ventilation holes
Prevent overheating.
 |
 | Copyright (C) 2009 |
