Unusable Paper

This section describes paper unusable on this machine.

To avoid fire or machine failure, do not use aluminum foil, carbon paper, or similar conductive paper.

To prevent faults, do not use any of the following kinds of treated paper:
- Paper for inkjet printers
- Thermal fax paper
- Art paper
- Aluminum foil
- Carbon paper
- Conductive paper
- Paper with perforated lines
- Hemmed-edge paper
- Envelopes
- Color OHP transparencies with easily melted coatings
Faults can occur if you copy or print onto sides that are already printed. Take care to copy or print onto unprinted sides only.

To prevent misfeeds, do not use the following kinds of paper:
- Bent, folded, or creased paper
- Perforated paper
- Slippery paper
- Torn paper
- Rough paper
- Thin paper with little stiffness
- Paper with a dusty surface
Even supported types of paper may cause paper jams or malfunctions if the paper is not in good condition.
If you copy or print onto rough grain paper, the output image might be blurred.
Do not load sheets that have already been printed onto by another machine. (Sheets can become jammed if they have been improperly stored.)