visable.png

Skip headerimage
ManualsContentsPreviousNextHelp

Installing the PostScript 3 Printer Driver (Windows Vista, Windows Server 2008)

Important

  1. Quit all applications currently running.

  2. Insert the CD-ROM into the CD-ROM drive.

    The installer starts.

  3. Select an interface language, and then click [OK].

    The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian, Catala, Turkce.

  4. Click [PostScript 3 Printer Driver].

    Add Printer Wizard starts.

  5. Click [Add a local printer].

  6. Click [Create a new port:], and then select [Standard TCP/IP Port] in [Type of port ].

  7. Click [Next].

  8. Select [TCP/IP Device] in [Device Type].

  9. Enter the machine's IP address in [Hostname or IP Address], and then click [Next>].

    The [Port name] text box automatically obtains a port name. Change this name if necessary.

    A printer driver installation screen appears when TCP/IP port is detected.

    When screen for Device selection appears, select "RICOH NetworkPrinter Driver C Model".

  10. Select that the name of the machine whose driver you want to install is selected, and then click [Next >].

  11. Change the machine name if you want, and then click [Next >].

    Check the checkbox to configure the machine as default.

  12. Specify whether or not to share the machine, and then click [Next >].

  13. Specify whether or not to print a test page, and then click [Finish].

    The printer driver installation starts.

Note