visable.png

Skip header
 

Finisher SR4050

The following procedure describes how to remove staple waste from the Finisher SR4050.

Note

  • While “Waste Staple Receptacle is full.” is displayed, you cannot use the Staple function.

  • “Waste Staple Receptacle is full.” is displayed until the staple waste box is reinstalled.

  • If the message is still displayed, reinstall the staple waste box.

1Open the finisher front cover.

Finisher illustration

2Pull out the staple waste box carefully, and then remove staple waste.

Staple waste box illustration

3Reinstall the staple waste box.

Staple waste box illustration

4Close the finisher front cover.

“Waste Staple Receptacle is full.” disappears.