When Memory Is Full

This section describes likely causes of and possible solutions for problems related to full memory.

Message	Cause	Solution
`"Memory is full. nn originals have been scanned. Press [Print] to copy scanned originals. Do not remove remaining originals."` "n" in the message represents a changeable number.	The scanned originals exceeds the number of pages that can be stored in memory.	Press [Print] to copy scanned originals and cancel the scanning data. Press [Stop] to cancel the scanning data and not copy.
`"Press [Continue] to scan and copy remaining originals."`	The machine checked if the remaining originals should be copied, after the scanned originals were printed.	To continue copying, remove all copies, and then press [Continue]. To stop copying, press [Stop].

Message

Cause

Solution

"Memory is full. nn originals have been scanned. Press [Print] to copy scanned originals. Do not remove remaining originals."

"n" in the message represents a changeable number.

The scanned originals exceeds the number of pages that can be stored in memory.

Press [Print] to copy scanned originals and cancel the scanning data. Press [Stop] to cancel the scanning data and not copy.

"Press [Continue] to scan and copy remaining originals."

The machine checked if the remaining originals should be copied, after the scanned originals were printed.

To continue copying, remove all copies, and then press [Continue]. To stop copying, press [Stop].

Connect Copy
Message	Cause	Solution
`"Sub-machine memory is full. Sub-machine will be disconnected."`	The quantity of data exceeds the capacity of the sub-machines.	Continue printing on the main machine.

If you set [Memory Full Auto Scan Restart] in [Input / Output] of User Tools to [On], even if the memory becomes full, the memory overflow message will not be displayed. The machine will make copies of the scanned originals first, and then automatically proceed to scan and to copy the remaining originals. In this case, the resulting sorted pages will not be sequential. For details about Memory Full Auto Scan Restart, see "Input/Output", Copy and Document Server Reference.