Messages Displayed on the Control Panel When Using the Printer Function

"Authentication has failed."

The entered login user name or login password is not correct.

Ask the user administrator for the correct login user name and login password.

"Authentication has failed."

The machine cannot perform authentication.

Contact the administrator.

"Cannot connect with the wireless card. Turn the main power switch off, then check the card."

• The wireless LAN interface unit was not inserted when the machine was turned on.

• The wireless LAN interface unit was pulled out after the machine was turned on.

• The settings are not updated although the unit is detected.

Turn off the machine, and check the wireless LAN interface unit is inserted correctly. Then, turn the machine on again. If the message appears again, call your service representative.

"Hardware Problem: Ethernet"

An error has occurred in the Ethernet board.

Turn the main power switch off, and back on again. If the message appears again, contact your service representative.

"Hardware Problem: HDD"

An error has occurred in the hard disk drive.

Turn the main power switch off, and back on again. If the message appears again, contact your service representative.

"Hardware Problem: Parallel I/F"

An error has occurred in the parallel interface board.

Turn the main power switch off, and back on again. If the message appears again, contact your service representative.

"Hardware Problem: USB"

An error has occurred in the USB interface.

Turn the main power switch off, and back on again. If the message appears again, contact your service representative.

"Hardware Problem: Wireless Board"

Access to the wireless board in which the wireless LAN interface unit is inserted is possible, but an error was detected.

Turn off the machine, and check the wireless board is inserted correctly. Then, turn the machine on again. If the message appears again, call your service representative.

"Hardware Problem: Wireless Card"

• The installed wireless LAN or Bluetooth card is not compatible with this machine.

• An error has occurred in either the wireless LAN or Bluetooth card.

Turn off the machine, and check the wireless card. Then, turn the machine on again. If the message appears again, call your service representative.

"IPDS font error. Turn the main power switch off then on. Press [Reset IPDS Fonts] in Printer Features."

An IPDS font error occurred.

Contact the machine administrator.

"Load following paper in n."

"To cancel job, press [Job Reset]."

(A figure is placed at n)

The printer driver settings are incorrect or the tray does not contain paper of the size selected in the printer driver.

Check the printer driver settings are correct, and then load paper of the size selected in the printer driver into the input tray. For details about how to change the paper size, see "Changing the Paper Size", About This Machine.

"Paper size and type are mismatched. Select another tray from the following and press [Continue]. To cancel job, press [Job Reset]. Paper size and type can also be changed in User Tool."

The printer driver settings are incorrect or the tray does not contain paper of the size or type selected in the printer driver.

Check the printer driver settings are correct, and then load paper of the size selected in the printer driver into the input tray. For details about how to change the paper size, see "Changing the Paper Size", About This Machine.

"Problem: Printer Font Error"

An error has occurred in the font settings.

Contact your service representative.

"The selected file(s) contained file(s) without access privileges. Only file(s) with access privileges will be deleted."

You have tried to delete files without the authority to do so.

Files can be deleted by the person who created the file. To delete a file which you are not authorized to delete, contact the person who created the file.

"The tray selected for other pages is the same as the one for Slip Sheets ([Designate]). Cannot print. Check the setting."

The tray selected for other pages is the same as the one for slip sheets.

Reset the job. Be sure the tray you select for slip sheets is not providing paper for other pages.

"Updating the destination list... Please wait. Specified destination(s) or sender's name has been cleared."

The destination list is being updated from the network using SmartDeviceMonitor for Admin or Web Image Monitor.

Wait until the message disappears. Do not switch off the power while this message is displayed. Depending on the number of destinations to be updated, there may be some delay before you can resume operation. Operations are not possible while this message is displayed.

"You do not have the privileges to use this function."

The logged in user name does not have permission for the selected function.

Contact the administrator about the permission for the required function.