visable.png

Skip headerimage
ManualsContentsPreviousNextHelp

Staple

Each copy set can be stapled together.

Illustration of Staple

Important

Original orientation and stapling position

Place all the originals in the ADF in the orientation in which they can be read normally. When placing the original on the exposure glass, keep the same orientation, but set the original facing downwards.

The relationship between the orientation in which you place the original and the staple positions is as follows:

Illustration of staple position

*1 The above table shows staple positioning. The orientation of the paper does not indicate orientation of delivery.

  1. Press [Finishing].

    Operation panel screen illustration

  2. Press [Finisher].

  3. Select one of the stapling positions.

    When the Finisher SR4030 is attached:

    Operation panel screen illustration

    When the Booklet Finisher SR4040 is attached:

    Operation panel screen illustration

    When the Finisher SR4050 is attached:

    Operation panel screen illustration

    When you select a stapling position, Sort is automatically selected.

  4. Enter the number of copy sets using the number keys.

  5. Press [OK].

  6. Place the originals, and then press the [Start] key.

Note

Reference