visable.png

Skip headerimage
ManualsContentsPreviousNextHelp

Sending by IP-Fax (IP-Fax destinations)

This section explains how to specify a destination using IP-Fax transmission.

When using IP-Fax transmission, specify the IP-Fax destination (IP address, host name, or alias telephone number) in place of the fax number.

Important

  1. Make sure that [Fax] is selected.

  2. Press [Manual Entry].

    Operation panel screen illustration

  3. Enter the IP-Fax destination, and then press [OK].

    Operation panel screen illustration

    If you enter an incorrect character, press [], [], [Backspace], or [Delete All]. Then, re-enter the characters correctly.

    To change the IP-Fax destination after pressing [OK], press [Edit Dest.], re-enter an IP-Fax destination, and then press [OK].

  4. To add a destination, press [Add].

    Operation panel screen illustration

  5. Specify the next destination.

    Operation panel screen illustration

    To add another destination, repeat steps 4 and 5.

    Press the transmission type tab to switch the transmission type between fax/IP-Fax, Internet Fax, e-mail, and folder.

  6. Press the [Start] key.

    The machine starts to scan the original and stores it in memory. When scanning ends, the Communicating indicator lights and transmission starts.

Note

Reference

Related topics

When using a gatekeeper server or SIP server
Setting a Port number