Imprimante multifonction laser monochrome, 4-en-1, 20ppm - SL-M2070W - Manuels - Samsung SAMSUNG sur FNAC.COM - Revenir à l'accueil
ou juste avant la balise de fermeture-->
Recherche par catégories :
Vidéos :
Samsung Mobile :
SAMSUNG MEMORY - MEMOIRE :
Tutoriels :
Samsung-GALAXY-S4-Air-View-Tutoriel-Video
Samsung- GALAXY S4 - Air Gesture - Tutoriel - Video
Samsung- GALAXY S4 - Lecteur optique - Tutoriel - Video
Samsung - GALAXY S4 - Smart Scroll - Tutoriel - Video
Samsung GALAXY S4 - ChatOn - Tutoriel - Video
Samsung GALAXY S4 - S Translator - Tutoriel - Video
Samsung, vidéos en français :
VOir également :
Samsung-TV-3D-TV-LED..> 23-Mar-2015 17:32 1.6M
Samsung-Mutiroom_Lin..> 23-Mar-2015 17:31 1.6M
Samsung-FRA-NUDVBEUH..> 23-Mar-2015 17:31 2.0M
Samsung-ENG-NUDVBEUH..> 23-Mar-2015 17:31 1.1M
Samsung-[Mutiroom_Li..> 23-Mar-2015 17:31 1.1M
Samsung-[HU7500-XNZF..> 23-Mar-2015 17:31 827K
Samsung-TV-3D-TV-LED..> 23-Mar-2015 17:30 1.2M
Samsung-FRA-X14DVBEU..> 23-Mar-2015 17:30 1.2M
Samsung-ENG-X14DVBEU..> 23-Mar-2015 17:30 1.5M
Samsung-Mutiroom_Lin..> 23-Mar-2015 17:30 1.2M
Samsung-SM-T800_UM_O..> 23-Mar-2015 17:29 1.7M
Samsung- Tablettes-G..> 23-Mar-2015 17:29 1.5M
Samsung-SM-T800_QSG_..> 23-Mar-2015 17:29 1.9M
Samsung-SM-T800_UM_E..> 23-Mar-2015 17:29 1.9M
Samsung-Televisions-..> 20-Mar-2015 18:41 6.8M
Samsung-Tablettes-ta..> 20-Mar-2015 18:39 2.7M
Samsung-SM-T530_UM_O..> 20-Mar-2015 18:38 2.7M
Samsung-SM-T530_UM_E..> 20-Mar-2015 18:38 2.8M
Samsung-Tablettes-Ga..> 20-Mar-2015 18:38 2.9M
Samsung-SM-T230_UM_E..> 20-Mar-2015 18:37 2.9M
Samsung-SM-T230_UM_O..> 20-Mar-2015 18:37 3.0M
Samsung-Smartphones-..> 20-Mar-2015 18:36 3.1M
Samsung-GT-S7390G_UM..> 20-Mar-2015 18:36 3.1M
Samsung-Galaxy-Camer..> 20-Mar-2015 18:35 3.1M
Samsung-EK-GC100_UM_..> 20-Mar-2015 18:35 3.3M
Samsung-EK-GC100_UM_..> 20-Mar-2015 18:34 3.4M
Samsung-Smartphones-..> 20-Mar-2015 18:34 3.4M
Samsung-GT-S7390_UM_..> 20-Mar-2015 18:33 3.6M
Samsung-GT-S7390_UM_..> 20-Mar-2015 18:32 3.7M
Samsung-Smartphones-..> 20-Mar-2015 18:32 3.8M
Samsung-Safety_infor..> 20-Mar-2015 18:31 5.0M
Samsung-Smartphones-..> 20-Mar-2015 18:30 5.0M
Samsung-SM-G800F_UM_..> 20-Mar-2015 18:30 5.3M
Samsung-SM-G800F_QSG..> 20-Mar-2015 18:29 5.4M
Samsung-SM-G800F_UM_..> 20-Mar-2015 18:28 5.6M
Samsung-Smartphones-..> 20-Mar-2015 18:27 5.9M
Samsung-SM-G900F_UM_..> 20-Mar-2015 18:26 3.1M
Samsung-SM-G900_UM_E..> 20-Mar-2015 18:25 3.6M
Samsung-SM-G900F_UM_..> 20-Mar-2015 18:25 3.4M
Samsung-SM-G900F_QSG..> 20-Mar-2015 18:24 3.8M
Samsung-SM-G900F_UM_..> 20-Mar-2015 18:24 3.8M
Samsung-Smartphones-..> 18-Mar-2015 07:24 1.7M
Samsung-Smartphones-..> 18-Mar-2015 07:24 1.9M
Samsung-Smartphones-..> 18-Mar-2015 07:23 2.2M
Samsung-SM-N915_UM_O..> 18-Mar-2015 07:23 2.2M
Samsung-Smartphones-..> 18-Mar-2015 07:23 2.4M
Samsung-SM-N910_UM_O..> 18-Mar-2015 07:22 2.4M
Samsung-SM-N910_UM_E..> 18-Mar-2015 07:22 2.6M
Samsung-SM-N910_UM_E..> 18-Mar-2015 07:22 2.7M
Samsung-Televisions-..> 18-Mar-2015 07:21 3.0M
Samsung-Televisions-..> 18-Mar-2015 07:21 3.3M
Samsung-Mobilite-Gal..> 18-Mar-2015 07:20 3.5M
Samsung-SM-N7505_UM_..> 18-Mar-2015 07:20 3.5M
Samsung-Safety_infor..> 18-Mar-2015 07:19 4.8M
Samsung-SM-N7505_QSG..> 18-Mar-2015 07:19 3.5M
Samsung-Solutions-d-..> 18-Mar-2015 07:17 5.3M
Samsung-SL-C460W_G1...> 18-Mar-2015 07:17 5.3M
visualkit.htm 17-Mar-2015 12:08 570
Samsung-Smartphones-..> 17-Mar-2015 06:32 3.6M
Samsung-Smartphones-..> 17-Mar-2015 06:31 3.8M
Samsung-Tablette-SM-..> 17-Mar-2015 06:31 4.0M
Samsung-Smartphone-G..> 17-Mar-2015 06:30 4.1M
Samsung-Telephones-c..> 17-Mar-2015 06:30 4.3M
Samsung-Tablettes-ta..> 17-Mar-2015 06:29 2.6M
Samsung-Gsm-Archives..> 17-Mar-2015 06:28 2.7M
Samsung-Tablettes-ta..> 17-Mar-2015 06:28 1.5M
Samsung-Smartphones-..> 16-Mar-2015 19:34 6.2M
Samsung-Televisions-..> 16-Mar-2015 19:31 5.2M
Samsung-Televisions-..> 16-Mar-2015 19:31 5.3M
Samsung-Televisions-..> 16-Mar-2015 19:29 6.0M
Samsung-Televisions-..> 16-Mar-2015 19:29 5.7M
Samsung-SamsungSchoo..> 16-Mar-2015 19:14 5.0M
Galaxy-Mini-S5570-An..> 16-Mar-2015 18:52 6.0M
Samsung-Smartphone-G..> 16-Mar-2015 18:48 2.3M
Samsung-Gsm-Archives..> 16-Mar-2015 18:48 2.6M
Samsung-Smartphones-..> 16-Mar-2015 18:48 2.4M
Samsung-Smartphones-..> 16-Mar-2015 18:47 2.7M
Samsung-Appareils-ph..> 16-Mar-2015 18:47 2.9M
Samsung-Tablet-GALAX..> 16-Mar-2015 18:46 3.4M
Samsung-Smartphone-G..> 16-Mar-2015 18:46 3.2M
Samsung-Telephones-c..> 16-Mar-2015 18:45 3.7M
Samsung-Portable_SSD..> 16-Mar-2015 18:45 3.4M
Samsung-Guide-de-l-u..> 16-Mar-2015 18:44 4.1M
Samsung-Manuel-d-uti..> 16-Mar-2015 18:44 3.7M
Samsung-School-Manue..> 16-Mar-2015 18:43 4.4M
Samsung-AVMGH052CA3-..> 16-Mar-2015 18:43 4.1M
Samsung-Vibrant-User..> 16-Mar-2015 18:41 4.7M
Samsung-AVMWH020CA0-..> 16-Mar-2015 18:41 4.4M
Samsung-Guide-détai..> 16-Mar-2015 18:40 4.7M
Samsung-Smartphones-..> 18-Mar-2015 07:24 1.7M
Samsung-Smartphones-..> 18-Mar-2015 07:24 1.9M
Samsung-Smartphones-..> 18-Mar-2015 07:23 2.2M
Samsung-SM-N915_UM_O..> 18-Mar-2015 07:23 2.2M
Samsung-Smartphones-..> 18-Mar-2015 07:23 2.4M
Samsung-SM-N910_UM_O..> 18-Mar-2015 07:22 2.4M
Samsung-SM-N910_UM_E..> 18-Mar-2015 07:22 2.6M
Samsung-SM-N910_UM_E..> 18-Mar-2015 07:22 2.7M
Samsung-Televisions-..> 18-Mar-2015 07:21 3.0M
Samsung-Televisions-..> 18-Mar-2015 07:21 3.3M
Samsung-Mobilite-Gal..> 18-Mar-2015 07:20 3.5M
Samsung-SM-N7505_UM_..> 18-Mar-2015 07:20 3.5M
Samsung-Safety_infor..> 18-Mar-2015 07:19 4.8M
Samsung-SM-N7505_QSG..> 18-Mar-2015 07:19 3.5M
Samsung-Solutions-d-..> 18-Mar-2015 07:17 5.3M
Samsung-SL-C460W_G1...> 18-Mar-2015 07:17 5.3M
visualkit.htm 17-Mar-2015 12:08 570
Samsung-Smartphones-..> 17-Mar-2015 06:32 3.6M
Samsung-Smartphones-..> 17-Mar-2015 06:31 3.8M
Samsung-Tablette-SM-..> 17-Mar-2015 06:31 4.0M
Samsung-Smartphone-G..> 17-Mar-2015 06:30 4.1M
Samsung-Telephones-c..> 17-Mar-2015 06:30 4.3M
Samsung-Tablettes-ta..> 17-Mar-2015 06:29 2.6M
Samsung-Gsm-Archives..> 17-Mar-2015 06:28 2.7M
Samsung-Tablettes-ta..> 17-Mar-2015 06:28 1.5M
Samsung-Smartphones-..> 16-Mar-2015 19:34 6.2M
Samsung-Televisions-..> 16-Mar-2015 19:31 5.2M
Samsung-Televisions-..> 16-Mar-2015 19:31 5.3M
Samsung-Televisions-..> 16-Mar-2015 19:29 6.0M
Samsung-Televisions-..> 16-Mar-2015 19:29 5.7M
Samsung-SamsungSchoo..> 16-Mar-2015 19:14 5.0M
Galaxy-Mini-S5570-An..> 16-Mar-2015 18:52 6.0M
Samsung-Smartphone-G..> 16-Mar-2015 18:48 2.3M
Samsung-Gsm-Archives..> 16-Mar-2015 18:48 2.6M
Samsung-Smartphones-..> 16-Mar-2015 18:48 2.4M
Samsung-Smartphones-..> 16-Mar-2015 18:47 2.7M
Samsung-Appareils-ph..> 16-Mar-2015 18:47 2.9M
Samsung-Tablet-GALAX..> 16-Mar-2015 18:46 3.4M
Samsung-Smartphone-G..> 16-Mar-2015 18:46 3.2M
Samsung-Telephones-c..> 16-Mar-2015 18:45 3.7M
Samsung-Portable_SSD..> 16-Mar-2015 18:45 3.4M
Samsung-Guide-de-l-u..> 16-Mar-2015 18:44 4.1M
Samsung-Manuel-d-uti..> 16-Mar-2015 18:44 3.7M
Samsung-School-Manue..> 16-Mar-2015 18:43 4.4M
Samsung-AVMGH052CA3-..> 16-Mar-2015 18:43 4.1M
Samsung-Vibrant-User..> 16-Mar-2015 18:41 4.7M
Samsung-AVMWH020CA0-..> 16-Mar-2015 18:41 4.4M
Samsung-Guide-détai..> 16-Mar-2015 18:40 4.7M
Galaxy-Mini-S5570-An..> 16-Mar-2015 18:52 6.0M
Samsung-Smartphone-G..> 16-Mar-2015 18:48 2.3M
Samsung-Gsm-Archives..> 16-Mar-2015 18:48 2.6M
Samsung-Smartphones-..> 16-Mar-2015 18:48 2.4M
Samsung-Smartphones-..> 16-Mar-2015 18:47 2.7M
Samsung-Appareils-ph..> 16-Mar-2015 18:47 2.9M
Samsung-Tablet-GALAX..> 16-Mar-2015 18:46 3.4M
Samsung-Smartphone-G..> 16-Mar-2015 18:46 3.2M
Samsung-Telephones-c..> 16-Mar-2015 18:45 3.7M
Samsung-Portable_SSD..> 16-Mar-2015 18:45 3.4M
Samsung-Guide-de-l-u..> 16-Mar-2015 18:44 4.1M
Samsung-Manuel-d-uti..> 16-Mar-2015 18:44 3.7M
Samsung-School-Manue..> 16-Mar-2015 18:43 4.4M
Samsung-AVMGH052CA3-..> 16-Mar-2015 18:43 4.1M
Samsung-Vibrant-User..> 16-Mar-2015 18:41 4.7M
Samsung-AVMWH020CA0-..> 16-Mar-2015 18:41 4.4M
Samsung-SamsungSchoo..> 16-Mar-2015 18:40 5.0M
Samsung-Guide-détai..> 16-Mar-2015 18:40 4.7M
Samsung-Wave-M-noir-..> 28-Jan-2015 09:37 5.6M
Samsung-Wave-noir-Op..> 28-Jan-2015 09:36 3.6M
Samsung-Wave-M-noir-..> 28-Jan-2015 09:35 3.9M
Samsung-Wave-723-gri..> 28-Jan-2015 09:35 7.0M
samsung-Wave-II-noir..> 28-Jan-2015 09:34 3.3M
Samsung-Wave-578-noi..> 28-Jan-2015 09:33 4.2M
Samsung-Wave-575-bla..> 28-Jan-2015 09:32 4.6M
Samsung-Wave-533-noi..> 28-Jan-2015 09:31 4.6M
Samsung-Wave-3-noir-..> 28-Jan-2015 09:30 4.9M
http://downloadcenter.samsung.com/content/UM/201308/20130815074232035/GT-I9195_UM_Open_Jellybean_Ita_Rev.1.0_130708.pdf
GT-I9195_UM_Open_Jellybean_Ger_Rev.1.0_130620.pdfhttp://downloadcenter.samsung.com/content/UM/201407/20140728164130527/[Mutiroom_Link]FRA-0723.pdf
http://downloadcenter.samsung.com/content/UM/201407/20140728164130527/[Mutiroom_Link]FRA-0723.pdf
BASIC
User’s Guide
BASIC
User’s Guide
This guide provides information concerning the installation, basic operation
and troubleshooting on windows.
ADVANCED
This guide provides information about the installation, advanced configuration, operation
and troubleshooting on various OS environments.
Some features may not be available depending on models or countries.
2
BASIC
1. Introduction
Key benefits 5
Features by models 7
Useful to know 12
About this user’s guide 13
Safety information 14
Machine overview 19
Control panel overview 23
Turning on the machine 27
Installing the driver locally 28
Reinstalling the driver 29
2. Menu Overview and Basic Setup
Menu overview 31
Machine’s basic settings 36
Media and tray 38
Basic printing 50
Basic copying 56
Basic scanning 61
Basic faxing 62
3. Maintenance
Ordering supplies and accessories 67
Available supplies 68
Storing the toner cartridge 69
Redistributing toner 71
Replacing the toner cartridge 73
Monitoring the supplies life 75
Setting the toner low alert 76
Cleaning the machine 77
Tips for moving & storing your machine 83
4. Troubleshooting
Tips for avoiding paper jams 85
Clearing original document jams 86
Clearing paper jams 91
Understanding the status LED 95
Understanding display messages 98
3
BASIC
5. Appendix
Specifications 104
Regulatory information 113
Copyright 126
1. Introduction
This chapter provides information you need to know before using the machine.
• Key benefits 5
• Features by models 7
• Useful to know 12
• About this user’s guide 13
• Safety information 14
• Machine overview 19
• Control panel overview 23
• Turning on the machine 27
• Installing the driver locally 28
• Reinstalling the driver 29
Key benefits
Environmentally friendly
• To save toner and paper, this machine supports Eco feature (see "Eco
printing" on page 54).
• To save paper, you can print multiple pages on one single sheet of paper
(see "Using advanced print features" on page 204).
• To save paper, you can print on both sides of the paper (double-sided
printing) (Manual) (see "Using advanced print features" on page 204).
• To save electricity, this machine automatically conserves electricity by
substantially reducing power consumption when not in use.
• We recommend using recycled paper for saving energy.
Fast high resolution printing
• You can print with a resolution of up to 1,200 x 1,200 dpi effective output.
• Fast, on-demand printing.
- M207x series
▪ For single-side printing, 20 ppm (A4) or 21 ppm (Letter).
- M2074 series
▪ For single-side printing, 18 ppm (A4) or 19 ppm (Letter).
Convenience
• Easy Capture Manager allows you to easily edit and print whatever you
captured using the Print Screen key on the keyboard (see "Easy Capture
Manager" on page 237).
• Samsung Easy Document Creator is an application to help users scan,
compile, and save documents in multiple formats, including .epub format.
These documents can be shared via social networking sites or fax (see"Using
Samsung Easy Document Creator" on page 243)
Key benefits
• AnyWeb Print helps you screen-capture, preview, scrap, and print the
screen of Windows Internet Explorer more easily, than when you use the
ordinary program (see "Samsung AnyWeb Print" on page 238).
• Smart Update allows you to check for the latest software and install the
latest version during the printer driver installation process. This is available
only for Windows.
• If you have Internet access, you can get help, support application, machine
drivers, manuals, and order information from the Samsung website,
www.samsung.com > find your product > Support or Downloads.
Wide range of functionality and application support
• Supports various paper sizes (see "Print media specifications" on page 106).
• Print watermark: You can customize your documents with words, such as
“Confidential” (see "Using advanced print features" on page 204).
• Print posters: The text and pictures of each page of your document are
magnified and printed across the multiple sheets of paper and can then be
taped together to form a poster (see "Using advanced print features" on
page 204).
• You can print in various operating systems (see "System requirements" on
page 109).
• Your machine is equipped with a USB interface and/or a network interface.
AirPrint
• AirPrint allows you to wirelessly print directly from iPhone, iPad and iPod
touch running iOS 4.2 or later.
Supports various wireless network setting method
• Using the WPS (Wi-Fi Protected Setup™) button
- You can easily connect to a wireless network using the WPS button on
the machine and the access point (a wireless router).
• Using the USB cable or a network cable
- You can connect and set various wireless network settings using a USB
cable or a network cable.
• Using the Wi-Fi Direct
- You can conveniently print from your mobile device using the Wi-Fi or
Wi-Fi Direct feature.
See "Introducing wireless set up methods" on page 149.
Features by models
Some features and optional goods may not be available depending on model or country.
Operating System
(●: Included, Blank: Not available)
Software
Operating System
M207x series
M207xW series
M207xF series
M207xFW series
M207xFH series
M207xHW series
Windows ● ●
Mac ● ●
Linux ● ●
Software M207x series
M207xW series
M207xF series
M207xFW series
M207xFH series
M207xHW series
SPL printer driver ● ●
PCL printer driver
PS printer driver
Features by models
(●: Included, Blank: Not available)
XPS printer drivera ● ●
Direct Printing Utility
Samsung Easy Printer Manager Scan to PC settings ● ●
Fax to PC settings ●
Device Settings ● ●
Samsung Easy Document Creator ● ●
Samsung Printer Status ● ●
AnyWeb Print ● ●
SyncThru™ Web Service ●
(M207xW series only)
●
(M207xFW series only)
SyncThru Admin Web Service ●
(M207xW series only)
●
(M207xFW series only)
Easy Eco Driver ● ●
Fax Samsung Network PC Fax ●
a. For XPS driver, it is only supported for Windows through the Samsung http://www.samsung.com
Software M207x series
M207xW series
M207xF series
M207xFW series
M207xFH series
M207xHW series
Features by models
Variety feature
Features
M207x series
M207xW series
M207xF series
M207xFW series
M207xFH series
M207xHW series
Hi-Speed USB 2.0 ● ●
Network Interface Ethernet 10/100 Base TX wired LAN ●
(M207xFW series /M207xHW series only)
Network Interface 802.11b/g/n wireless LANa ●
(M207xW series only)
●
(M207xFW series /M207xHW series only)
NFC printing/scanning ●
(M207xW series only)
●
(M207xFW series /M207xHW series only)
Eco printing (Control panel) ● ●
Duplex (2-sided) printing (Manual)b ● ●
USB memory interface
Memory module
Mass Storage Device (HDD)
Duplex Automatic Document Feeder (DADF)
Automatic Document Feeder (ADF) ●
Features by models
Fax Multi-send ●
Delay send ●
Priority send ●
Duplex send
Secure receive ●
Duplex print
Send/ Receive forward - fax ●
Send/ Receive forward - email
Send/ Receive forward - server
Scan Scanning to email
Scanning to SMB server
Scanning to FTP server
Duplex scan
Scan to PC ● ●
Scan to WSD ●
(M207xW series only)
●
(M207xFW series only)
Features
M207x series
M207xW series
M207xF series
M207xFW series
M207xFH series
M207xHW series
Features by models
(●: Included, Blank: Not available)
Copy ID card copying ● ●
Reduced or enlarged copying ● ●
Collation ● ●
Poster
Clone
Book
2-up/4-up ● ●
Adjust background ● ●
Margin shift
Edge erase
Gray enhance
Duplex copy
a. Depending on your country, wireless LAN card may not be available. For some counties, only 802.11 b/g can be applied. Contact your local Samsung dealer or the retailer where you
bought your machine.
b. Windows only.
Features
M207x series
M207xW series
M207xF series
M207xFW series
M207xFH series
M207xHW series
Useful to know
The machine does not print.
• Open the print queue list and remove the document from the
list (see "Canceling a print job" on page 51).
• Remove the driver and install it again (see "Installing the driver
locally" on page 28).
• Select your machine as your default machine in your Windows
(see "Setting your machine as a default machine" on page 203).
Where can I purchase accessories or supplies?
• Inquire at a Samsung distributor or your retailer.
• Visit www.samsung.com/supplies. Select your country/region
to view product service information.
The status LED flashes or remains constantly on.
• Turn the product off and on again.
• Check the meanings of LED indications in this manual and
troubleshoot accordingly (see "Understanding the status LED"
on page 95).
A paper jam has occurred.
• Open and close the scan unit (see "Front view" on page 20).
• Check the instructions on removing jammed paper in this
manual and troubleshoot accordingly (see "Clearing paper
jams" on page 91).
Printouts are blurry.
• The toner level might be low or uneven. Shake the toner
cartridge (see "Redistributing toner" on page 71).
• Try a different print resolution setting (see "Opening printing
preferences" on page 52).
• Replace the toner cartridge (see "Toner cartridge" on page 73).
Where can I download the machine’s driver?
• You can get help, support application, machine drivers,
manuals, and order information from the Samsung website,
www.samsung.com > find your product > Support or
Downloads.
1. Introduction 13
About this user’s guide
This user's guide provides information for your basic understanding of the
machine as well as detailed steps to explain machine usage.
• Read the safety information before using the machine.
• If you have a problem using the machine, refer to the troubleshooting
chapter.
• Terms used in this user’s guide are explained in the glossary chapter.
• All illustrations in this user’s guide may differ from your machine depending
on its options or model you purchased.
• The screenshots in this administrator’s guide may differ from your machine
depending on the machine’s firmware/driver version.
• The procedures in this user’s guide are mainly based on Windows 7.
1
Conventions
Some terms in this guide are used interchangeably, as below:
• Document is synonymous with original.
• Paper is synonymous with media, or print media.
• Machine refers to printer or MFP.
2
General icons
Icon Text Description
Caution
Gives users information to protect the machine from
possible mechanical damage or malfunction.
Note
Provides additional information or detailed
specification of the machine function and feature.
1. Introduction 14
Safety information
These warnings and precautions are included to prevent injury to you and
others, and to prevent any potential damage to your machine. Be sure to read
and understand all of these instructions before using the machine. After reading
this section, keep it in a safe place for future reference.
3
Important safety symbols
Explanation of all icons and signs used in this chapter
4
Operating environment
Warning
Warning Hazards or unsafe practices that may result in severe
personal injury or death.
Caution Hazards or unsafe practices that may result in minor
personal injury or property damage.
Do not attempt.
Do not use if the power cord is damaged or if the electrical outlet is
not grounded.
This could result in electric shock or fire.
Do not place anything on top of the machine (water, small metal or
heavy objects, candles, lit cigarettes, etc.).
This could result in electric shock or fire.
• If the machine gets overheated, it releases smoke, makes
strange noises, or generates an odd odor, immediately turn off
the power switch and unplug the machine.
• The user should be able to access the power outlet in case of
emergencies that might require the user to pull the plug out.
This could result in electric shock or fire.
Do not bend, or place heavy objects on the power cord.
Stepping on or allowing the power cord to be crushed by a heavy
object could result in electric shock or fire.
Do not remove the plug by pulling on the cord; do not handle the
plug with wet hands.
This could result in electric shock or fire.
Safety information
1. Introduction 15
Caution
5
Operating method
Caution
During an electrical storm or for a period of non-operation,
remove the power plug from the electrical outlet.
This could result in electric shock or fire.
Be careful, the paper output area is hot.
Burns could occur.
If the machine has been dropped, or if the cabinet appears
damaged, unplug the machine from all interface connections and
request assistance from qualified service personnel.
Otherwise, this could result in electric shock or fire.
If the machine does not operate properly after these instructions
have been followed, unplug the machine from all interface
connections and request assistance from qualified service
personnel.
Otherwise, this could result in electric shock or fire.
If the plug does not easily enter the electrical outlet, do not
attempt to force it in.
Call an electrician to change the electrical outlet, or this could
result in electric shock.
Do not allow pets to chew on the AC power, telephone or PC
interface cords.
This could result in electric shock or fire and/or injury to your pet.
Do not forcefully pull the paper out during printing.
It can cause damage to the machine.
Be careful not to put your hand between the machine and paper
tray.
You may get injured.
Be care when replacing paper or removing jammed paper.
New paper has sharp edges and can cause painful cuts.
When printing large quantities, the bottom part of the paper
output area may get hot. Do not allow children to touch.
Burns can occur.
When removing jammed paper, do not use tweezers or sharp metal
objects.
It can damage the machine.
Do not allow too many papers to stack up in the paper output tray.
It can damage the machine.
Safety information
1. Introduction 16
6
Installation / Moving
Warning
Do not block or push objects into the ventilation opening. Caution
This could result in elevated component temperatures which can
cause damage or fire.
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
This machine's power reception device is the power cord.
To switch off the power supply, remove the power cord from the
electrical outlet.
Do not place the machine in an area with dust, humidity, or water
leaks.
This could result in electric shock or fire.
Place the machine in the environment where it meets the
operating temperature and humidity specification.
Otherwise, quality problems can occur and cause damage to the
machine.
see "General specifications" on page 104.
Before moving the machine, turn the power off and disconnect all
cords. The information below are only suggestions based on the
units weight.If you have a medical condition that prevents you
from lifting, do not lift the machine. Ask for help, and always use
the appropriate amount of people to lift the device safety.
Then lift the machine:
• If the machine weighs under 20 kg (44.09 lbs), lift with 1 person.
• If the machine weighs 20 kg (44.09 lbs) - 40kg (88.18 lbs), lift
with 2 people.
• If the machine weighs more than 40 kg (88.18 lbs), lift with 4 or
more people.
The machine could fall, causing injury or machine damage.
Choose a flat surface with enough space for ventilation to place
the machine. Also consider the space required to open the cover
and trays.
The place should be well-ventilated and be far from direct light,
heat, and humidity.
When using the machine for a long period of time or printing a
large number of pages in a non-ventilated space, it could pollute
the air and be harmful to your health. Place the machine in a wellventilated
space or open a window to circulate the air periodically.
Do not place the machine on an unstable surface.
The machine could fall, causing injury or machine damage.
Safety information
1. Introduction 17
7
Maintenance / Checking
Caution
Use only No.26 AWGa
or larger, telephone line cord, if necessary.
Otherwise, it can cause damage to the machine.
Make sure you plug the power cord into a grounded electrical
outlet.
Otherwise, this could result in electric shock or fire.
Use the power cord supplied with your machine for safe
operation. If you are using a cord which is longer than 2 meters (6
feet) with a 110V machine, then the gauge should be 16 AWG or
larger.
Otherwise, it can cause damage to the machine, and could result
in electric shock or fire.
Do not put a cover over the machine or place it in an airtight
location, such as a closet.
If the machine is not well-ventilated, this could result in fire.
Do not overload wall outlets and extension cords.
This can diminish performance, and could result in electric shock
or fire.
The machine should be connected tothe power level which is
specified on the label.
If you are unsure and want to check the power level you are using,
contact the electrical utility company.
a. AWG: American Wire Gauge
Unplug this product from the wall outlet before cleaning the
inside of the machine. Do not clean the machine with benzene,
paint thinner or alcohol; do not spray water directly into the
machine.
This could result in electric shock or fire.
When you are working inside the machine replacing supplies or
cleaning the inside, do not operate the machine.
You could get injured.
Keep cleaning supplies away from children.
Children could get hurt.
Do not disassemble, repair or rebuild the machine by yourself.
It can damage the machine. Call a certified technician when the
machine needs repairing.
To clean and operate the machine, strictly follow the user's guide
provided with the machine.
Otherwise, you could damage the machine.
Safety information
1. Introduction 18
8
Supply usage
Caution
Keep the power cable and the contact surface of the plug clean
from dust or water.
Otherwise, this could result in electric shock or fire.
• Do not remove any covers or guards that are fastened with
screws.
• Fuser units should only be repaired by a certified service
technician. Repair by non-certified technicians could result in
fire or electric shock.
• The machine should only be repaired by a Samsung service
technician.
Do not disassemble the toner cartridge.
Toner dust can be dangerous if inhaled or ingested.
Do not burn any of the supplies such as toner cartridge or fuser
unit.
This could cause an explosion or uncontrollable fire.
When storing supplies such as toner cartridges, keep them away
from children.
Toner dust can be dangerous if inhaled or ingested.
Using recycled supplies, such as toner, can cause damage to the
machine.
In case of damage due to the use of recycled supplies, a service
fee will be charged.
For supplies that contain toner dust (toner cartridge, waste toner
bottle, imaging unit, etc.) follow the instructions below.
• When disposing of the supplies, follow the instructions for
disposal. Refer to the reseller for disposal instructions.
• Do not wash the supplies.
• For a waste toner bottle, do not reuse it after emptying the
bottle.
If you do not follow the instructions above, it may cause machine
malfunction and environmental pollution. The warranty does not
cover damages caused by a user's carelessness.
When toner gets on your clothing, do not use hot water to wash
it.
Hot water sets toner into fabric. Use cold water.
When changing the toner cartridge or removing jammed paper,
be careful not to let toner dust touch your body or clothes.
Toner dust can be dangerous if inhaled or ingested.
1. Introduction 19
Machine overview
9
Accessories
Power cord Quick installation guide
Software CDa
a. The software CD contains the printer drivers and software applications.
Misc. accessoriesb
b. Miscellaneous accessories included with your machine may vary by country of purchase and specific model.
Machine overview
1. Introduction 20
10
Front view
• This illustration may differ from your machine depending on your model.
There are various types of machine.
• Some features and optional goods may not be available depending on
model or country (see "Features by models" on page 7).
Type A
1 Scanner lid 7 Output tray
9 10
11
7
6 2
5
4 3
1
8
12
2 Control panel 8 NFC (Near Field Communication) tag
3 Handle 9 Scanner glass
4 Tray 10 Scan unita b
5 Tray handle 11 Inner cover
6 Output support 12 Toner cartridge
a. Close the scanner lid before opening the scan unit.
b. Be careful not to pinch your fingers.
Machine overview
1. Introduction 21
Type B
15
12
14
16
10
9 5
4
8
7 6
1 2
13
3
11
1 Document feeder cover 9 Output support
2 Document feeder guide
cover
10 Output tray
3 Document feeder output tray 11 NFC (Near Field Communication) tag
4 Document feeder output
support
12 Scanner lid
5 Control panel 13 Scanner glass
6 Handle 14 Scan unita b
a. Close the scanner lid before opening the scan unit.
b. Be careful not to pinch your fingers.
7 Tray 15 Inner cover
8 Tray handle 16 Toner cartridge
Machine overview
1. Introduction 22
11
Rear view
• This illustration may differ from your machine depending on your model.
There are various types of machine.
• Some features and optional goods may not be available depending on
model or country (see "Features by models" on page 7).
Type A
Type B
1 USB port 2 Power receptacle
1
2
1 USB port
2 Network porta
a. M207xFW series only.
3 Extension telephone socket (EXT.)
4 Telephone line socket (LINE)
5 Power receptacle
1
3
2
5
4
1. Introduction 23
Control panel overview
• This control panel may differ from your machine depending on its model.
There are various types of control panels.
• Some features and optional goods may not be available depending on
model or country (see "Features by models" on page 7).
12
Type A
1
ID Copy
Allows you to copy both sides of an ID card like a
driver’s license on a single side of paper (see "ID card
copying" on page 59).
2 Scan to Switches between scan and copy mode. The Scan to
LED turns on scan mode and turns off on copy mode
3 Display screen Shows the current status and displays prompts during
operation.
1 2 3 4 5 6 7
14 13 12 11 10 9 8
4
Menu Opens Menu mode and scrolls through the available
menus (see "Menu overview" on page 31).
5 Left/Right
Arrows
Scrolls through the options available in the selected
menu and increases or decreases values.
6 Stop/
Clear
Stops an operation at any time.
7
Power/
Wakeup
Turns the power on or off, or wakes up the machine
from the power save mode. If you need to turn the
machine off, press this button for more than three
seconds.
8
Start Starts a job.
9 Power
saver
Goes into sleep mode.
10 OK Confirms the selection on the screen.
11 Back Sends you back to the upper menu level.
12 Status LED Indicates the status of your machine (see
"Understanding the status LED" on page 95).
13
Eco
Turns into eco mode to reduce toner consumption and
paper usage when pc-printing and copying only (see
"Eco printing" on page 54).
Control panel overview
1. Introduction 24
13
Type B
14
WPSa
Configures the wireless network connection easily
without a computer (see "Using the WPS button" on
page 151).
Print
Screen
Press this button and the Status LED will start blinking.
If you want to print only the active screen, release the
button when the Status LED stops blinking. If you want
to print the whole screen, release the button while it’s
blinking.
• Print Screen can only be used in the
Windows and Mac operating systems.
• You can only use this function with USBconnected
machine.
• When printing the active window/whole
monitor screen using the print screen
button, the machine may use more toner
depending on what is being printed.
• You can only use this function if the
machine’s Samsung Easy Printer Manager
program is installed. If you are a Mac OS
user, you need to enable Screen Print
Settings from the Samsung Easy Printer
Manager to use the Print Screen feature.
a. M207xW/ M207xFW series only.
1
Darkness
Adjusts the brightness level to make a copy for easier
reading, when the original contains faint markings and
dark images.
2
ID Copy
Allows you to copy both sides of an ID card like a
driver’s license on a single side of paper (see "ID card
copying" on page 59).
3 Display screen Shows the current status and displays prompts during
an operation.
4 Copy Switches to Copy mode.
5 Fax Switches to Fax mode.
6
Menu Opens Menu mode and scrolls through the available
menus (see "Menu overview" on page 31).
1 2 3 4 5 6 7 8 9 10 11 12
21 20 19 18 17 16 15 14 13
Control panel overview
1. Introduction 25
7 Left/
Right
Arrows
Scrolls through the options available in the selected
menu and increases or decreases values.
8 Numeric keypad Dials a number or enters alphanumeric characters (see
"Keypad letters and numbers" on page 197).
9 Address
Book
Allows you to store frequently used fax numbers or
search for stored fax numbers (see "Storing email
address" on page 195 or "Setting up the fax address
book" on page 198).
10
Redial/
Pause
Redials the recently sent fax number or received caller
ID in ready mode, or inserts a pause(-) into a fax number
in edit mode (see "Redialing the fax number" on page
225).
11 Stop/
Clear
Stops an operations at any time.
12
Power/
Wakeup
Turns the power on or off, or wakes up the machine
from the power save mode. If you need to turn the
machine off, press this button for more than three
seconds.
13
Start Starts a job.
14 Power
saver
Goes into sleep mode.
15
On Hook
Dial
When you press this button, you can hear a dial tone.
Then enter a fax number. It is similar to making a call
using speaker phone (see "Receiving manually in Tel
mode" on page 231).
16 OK Confirms the selection on the screen.
17 Back Sends you back to the upper menu level.
18
Scan
Switches to Scan mode.
19 Status LED Indicates the status of your machine (see
"Understanding the status LED" on page 95).
20
Eco
Turn into eco mode to reduce toner consumption and
paper usage when pc-printing and copying only (see
"Eco printing" on page 54).
Control panel overview
1. Introduction 26
21
WPSa
Configures the wireless network connection easily
without a computer (see "Using the WPS button" on
page 151).
Print
Screen
Press this button and the display will Print Screen? on
the display screen. If you want to print only the active
screen, select the Active. If you want to print the whole
screen, select Full.
• Print Screen can only be used in the
Windows and Mac operating systems.
• You can only use this function with USBconnected
machine.
• When printing the active window/whole
monitor screen using the print screen
button, the machine may use more toner
depending on what is being printed.
• You can only use this function if the
machine’s Samsung Easy Printer Manager
program is installed. If you are a Mac OS user,
you need to enable Screen Print Settings
from the Samsung Easy Printer Manager to
use the Print Screen feature.
a. M207xW/ M207xFW series only.
1. Introduction 27
Turning on the machine
1 Connect the machine to the electricity supply first.
Turn the switch on if the machine has a power switch.
Illustrations on this user’s guide may differ from your machine depending
on its options or models. Check your machine type (see "Front view" on
page 20).
2 Power is turned on automatically.
For M207x series, press (Power/Wakeup) button on the control
panel.
If you want to turn the power off, press and hold (Power/Wakeup)
button for about 3 seconds.
1. Introduction 28
Installing the driver locally
A locally connected machine is a machine directly attached to your computer
using the cable. If your machine is attached to a network, skip the following
steps below and go on to installing a network connected machine’s driver (see
"Installing driver over the network" on page 140).
• If you are a Mac or Linux operating systems user, refer to the "Installation
for Mac" on page 131 or "Installation for Linux" on page 133.
• The installation window in this User’s Guide may differ depending on the
machine and interface in use.
• Only use a USB cable no longer than 3 meters (118 inches).
14
Windows
1 Insert the supplied software CD into your CD-ROM drive.
If the installation window does not appear, click Start > All programs >
Accessories > Run.
X:\Setup.exe replacing “X” with the letter, which represents your CDROM
drive and click OK.
2 Review and accept the installation agreements in the installation
window. Then, click Next.
3 Select USB connection on the Printer Connection Type screen. Then,
click Next.
4 Follow the instructions in the installation window.
1. Introduction 29
Reinstalling the driver
If the printer driver does not work properly, follow the steps below to reinstall
the driver.
15
Windows
1 From the Start menu, select Programs or All Programs > Samsung
Printers > Uninstall Samsung Printer Software.
2 Follow the instructions in the installation window.
3 Insert the software CD into your CD-ROM drive and install the driver
again (see "Installing the driver locally" on page 28).
2. Menu Overview and
Basic Setup
This chapter provides information about the overall menu structure and the basic setup options.
• Menu overview 31
• Media and tray 38
• Basic printing 50
• Basic copying 56
• Basic scanning 61
• Basic faxing 62
2. Menu Overview and Basic Setup 31
Menu overview
The control panel provides access to various menus to set up the machine or use
the machine’s functions.
• This function is not supported for M207x series (see "Control panel
overview" on page 23).
• Some menus may not appear on the display depending on options or
models. If so, it is not applicable to your machine.
• Some menu names may differ from your machine depending on its
options or the models.
• The menus are described in the Advanced Guide (see "Useful Setting
Menus" on page 178).
1
Accessing the menu
1 Select the Fax, Copy, or Scan button on the control panel depending on
the feature to be used.
2 Select (Menu) until the menu you want appears on the bottom line
of the display and press OK.
3 Press the arrows until the needed menu item appears and press OK.
4 If the setting item has sub menus, repeat step 3.
5 Press OK to save the selection.
6 Press (Stop/Clear) to return to the ready mode.
Items Options
Fax Feature
(M207xF series,
M207xFW series)
Darkness Normal
Dark+1- Dark+5
Light+5- Light+1
Resolution Standard
Fine
Super Fine
Photo Fax
Color Fax
Original Size
Multi Send
Delay Send
Priority Send
Send Forward Forward to Fax
Rcv.Forward Forward to Fax
Forward to PC
Forward & Print
Secure Receive Off
On
Print
Menu overview
2. Menu Overview and Basic Setup 32
Fax Feature
(Continue)
Add Page
Cancel Job
Fax Setup
(M207xF
series,M207xFW
series)
Sending Redial Times
Redial Term
Prefix Dial
ECM Mode
Fax Confirm
Image TCR
Dial Modea
Items Options
Fax Setup
(Continue)
Receiving Receive Mode
Ring To Answer
Stamp RCV Name
RCV Start Code
Auto Reduction
Discard Size
Junk Fax Setup
DRPD Modea
Change Default Resolution
Darkness
Original Size
Manual TX/RX
Manual TX/RX On
Off
Copy Feature Original Size
Reduce/Enlarge
Darkness Normal
Dark+1- Dark+5
Light+5- Light+1
Items Options
Menu overview
2. Menu Overview and Basic Setup 33
Copy Feature
(Continue)
Original Type Text
Text/Photo
Photo
Collation On
Off
Layout Normal
2-Up
4-Up
ID Copy
Adjust Bkgd. Off
Auto
Enhance Lev.1
Enhance Lev.2
Erase Lev.1- Erase Lev.4
Copy Setup Change Default Original Size
Copies
Reduce/Enlarge
Darkness
Original Type
Collation
Items Options
System Setup Machine Setup Machine ID
Fax Number
Date & Time
Clock Mode
Language
Default Mode
Power Save
Auto Power Off
Wakeup Event
System Timeout
Job Timeout
Altitude Adj.
Auto Continueb
Paper Substit.b
Toner Save
Eco Settings
Paper Setup Paper Size
Paper Type
Margin
Items Options
Menu overview
2. Menu Overview and Basic Setup 34
System Setup
(Continue)
Sound/Volume Key Sound
Alarm Sound
Speaker
Ringer
Report Configuration
Demo Page
Supplies Info.
Usage Counter
Fax Received
Fax Sent
Schedule Jobs
Fax Confirm.
Junk Fax
Address Book
Maintenance CLR Empty Msg.c
Supplies Life
Image Mgr.
TonerLow Alert
Serial Number
Items Options
Network c
(M207xF series,
M207xFW series)
TCP/IP (IPv4) DHCP
BOOTP
Static
TCP/IP (IPv6) IPv6 Protocol
DHCPv6 Config
Ethernet Ethernet Port
Ethernet Speed
Wi-Fi Wi-Fi ON/OFF
WPS
Wi-Fi Direct
Wi-Fi Signal
WLAN Default
Protocol Mgr. HTTP
WINS
SNMPv1/v2t
UPnP(SSDP)
mDNS
SetIP
SLP
Network Conf.
Items Options
Menu overview
2. Menu Overview and Basic Setup 35
Network
(Continue)
Clear Settings
a. This option may not be available depending on your country.
b. This option only appears if Paper Mismatch is enabled.
c. This option only appears when small amount of toner is left in the cartridge.
Items Options
2. Menu Overview and Basic Setup 36
Machine’s basic settings
You can set the machine’s settings by using the Device Settings in
Samsung Easy Printer Manager program.
• For Windows and Mac users, you set from Samsung Easy Printer
Manager > (Switch to advanced mode) > Device Settings, see
"Device Settings" on page 246.
After installation is complete, you may want to set the machine's default
settings.
To change the machine’s default settings, follow these steps:
It may be necessary to press OK to navigate to lower-level menus for some
models.
1 Select (Menu) > System Setup > Machine Setup on the control
panel.
2 Select the option you want, then press OK.
• Language: change the language that is displayed on the control
panel.
• Date & Time: When you set the time and date, they are used in delay
fax. They are printed on reports. If, however, they are not correct, you
need to change it for the correct time being.
Enter the correct time and date using arrows or numeric keypad (see
"Keypad letters and numbers" on page 197).
• Month = 01 to 12
• Day = 01 to 31
• Year = requires four digits
• Hour = 01 to 12
• Minute = 00 to 59
• Clock Mode: You can set your machine to display the current time
using either a 12-hour or 24-hour format.
• Power Save: When you are not using the machine for a while, use
this feature to save power.
When you press the (Power/Wakeup) button, start printing, or a fax is
received, the product will wake up from the power saving mode.
• Altitude Adj.: Print quality is affected by atmospheric pressure,
which atmospheric pressure is determined by the height of the
machine above sea level. Before you set the altitude value,
determine the altitude where you are (see "Altitude adjustment" on
page 194).
3 Select the option you want, then press OK.
4 Press OK to save the selection.
Machine’s basic settings
2. Menu Overview and Basic Setup 37
5 Press (Stop/Clear) button to return to ready mode.
Refer to below links to set other settings useful for using the machine.
• See "Entering various characters" on page 197.
• See "Keypad letters and numbers" on page 197.
• See "Setting the paper size and type" on page 45.
• See "Setting up the fax address book" on page 198.
2. Menu Overview and Basic Setup 38
Media and tray
This chapter provides information on how to load print media into your
machine.
• Using print media that does not meet these specifications may cause
problems or require repairs. Such repairs are not covered by Samsung’s
warranty or service agreements.
• Make sure not to use the inkjet photo paper with this machine. It could
cause damage to the machine.
• Using inflammable print media can cause a fire.
• Use designated print media (see "Print media specifications" on page
106).
The use of inflammable media or foreign materials left in the printer may
lead to overheating of the unit and, in rare cases may cause a fire.
2
Tray overview
To change the size, you need to adjust the paper guides.
1 Paper width guide
2 Tray
Illustrations on this user’s guide may differ from your machine depending
on its options or models. Check your machine type (see "Front view" on
page 20).
If you do not adjust the guide, it may cause paper registration, image skew,
or jamming of the paper.
2
1
Media and tray
2. Menu Overview and Basic Setup 39
3
Loading paper in the tray
Illustrations on this user’s guide may differ from your machine depending
on its options or models. Check your machine type (see "Front view" on
page 20).
1 Open the tray. Then, adjust the tray size to the media size you are loading
(see "Tray overview" on page 38).
2 Flex or fan the edge of the paper stack to separate the pages before
loading papers.
3 Place the paper with the side you want to print facing up.
1
2
Media and tray
2. Menu Overview and Basic Setup 40
• Do not push the paper width guide too far causing the media to warp.
• Do not use a paper with a leading-edge curl, it may cause a paper jam or
the paper can be wrinkled.
• If you do not adjust the paper width guide, it may cause paper jams.
4 Squeeze the paper width guide and slide it to the edge of the paper stack
without causing it to bend.
5 When you print a document, set the paper type and size for the tray (see
"Setting the paper size and type" on page 45).
Media and tray
2. Menu Overview and Basic Setup 41
4
Manual feeding in the tray
The tray can hold special sizes and types of print material, such as postcards,
note cards, and envelopes (see "Print media specifications" on page 106).
To feed manually in the tray, click the below:
See "Loading paper in the tray" on page 39.
Tips on using the manual feeding in tray
• If you select Paper > Source > Manual Feeder from your printer driver,
you need to press OK each time you print a page.
• Load only one type, size and weight of print media at time in the in the
tray.
• To prevent paper jams, do not add paper while printing when there is still
paper in the tray.
• Print media should be loaded face up with the top edge going into the
tray first and be placed in the center of the tray.
• To ensure printing quality and to prevent paper jams, only load the
available paper (see "Print media specifications" on page 106).
• Flatten any curl on postcards, envelopes, and labels before loading them
into the in the tray.
• When printing on special media, you must follow the loading guidelines
(see "Printing on special media" on page 41).
5
Printing on special media
The table below shows the special media usable in tray.
To change the paper setting set in the machine, set the paper type from the
Printing preferences window > Paper tab > Paper Type (see "Opening
printing preferences" on page 52).
• When using special media, we recommend you feed one sheet at a time
(see "Print media specifications" on page 106).
• Illustrations on this user’s guide may differ from your machine
depending on its options or models. Check your machine type (see
"Front view" on page 20).
To see for paper weights for each sheet, refer to "Print media specifications" on
page 106.
Types Traya
Plain ●
Thick ●
Thin ●
Bond ●
Color ●
Media and tray
2. Menu Overview and Basic Setup 42
(●: Supported, Blank: Not supported)
Envelope
Printing successfully on envelopes depends upon the quality of the envelopes.
To print an envelope, place it as shown in the following figure.
• When selecting envelopes, consider the following factors:
- Weight: should not exceed 90 g/m2 otherwise; jams may occur.
- Construction: should lie flat with less than 6 mm curl and should not
contain air.
- Condition: should not be wrinkled, nicked, nor damaged.
- Temperature: should resist the heat and pressure of the machine
during operation.
• Use only well-constructed envelopes with sharp and well-creased folds.
• Do not use stamped envelopes.
• Do not use envelopes with clasps, snaps, windows, coated lining, selfadhesive
seals, or other synthetic materials.
• Do not use damaged or poorly made envelopes.
CardStock ●
Labels ●
Envelope ●
Preprinted ●
Cotton ●
Recycled ●
Archive ●
a. The paper types available manual feeding in tray.
Types Traya
Media and tray
2. Menu Overview and Basic Setup 43
• Be sure the seam at both ends of the envelope extends all the way to the
corner of the envelope.
1 Acceptable
2 Unacceptable
• Envelopes with a peel-off adhesive strip or with more than one flap that
folds over to seal must use adhesives compatible with the machine’s fusing
temperature for 0.1 second about 170°C (338 °F). The extra flaps and strips
might cause wrinkling, creasing, or jams, and may even damage the fuser.
• For the best print quality, position margins no closer than 15 mm from the
edges of the envelope.
• Avoid printing over the area where the envelope’s seams meet.
Labels
To avoid damaging the machine, use only labels designed for use in laser
printers.
• When selecting labels, consider the following factors:
- Adhesives: Should be stable at your machine’s fusing temperature
about 170°C (338°F).
- Arrangement: Only use labels with no exposed backing between them.
Labels can peel off sheets that have spaces between the labels, causing
serious jams.
- Curl: Must lie flat with no more than 13 mm of curl in any direction.
- Condition: Do not use labels with wrinkles, bubbles, or other
indications of separation.
• Make sure that there is no exposed adhesive material between labels.
Exposed areas can cause labels to peel off during printing, which can cause
paper jams. Exposed adhesive can also cause damage to machine
components.
Media and tray
2. Menu Overview and Basic Setup 44
• Do not run a sheet of labels through the machine more than once. The
adhesive backing is designed for only a single pass through the machine.
• Do not use labels that are separating from the backing sheet or are wrinkled,
bubbled, or otherwise damaged.
Card stock/ Custom-sized paper
• In the software application, set the margins to at least 6.4 mm (0.25 inches)
away from the edges of the material.
Preprinted paper
When loading preprinted paper, the printed side should be facing up with an
uncurled edge at the front. If you experience problems with paper feeding, turn
the paper around. Note that print quality is not guaranteed.
• Must be printed with heat-resistant ink that will not melt, vaporize, or
release hazardous emissions when subjected to the machine’s fusing
temperature for 0.1 second (about 170°C (338°F)).
• Preprinted paper ink must be non-flammable and should not adversely
affect machine rollers.
• Before you load preprinted paper, verify that the ink on the paper is dry.
During the fusing process, wet ink can come off preprinted paper, reducing
print quality.
Media and tray
2. Menu Overview and Basic Setup 45
6
Setting the paper size and type
After loading paper in the paper tray, set the paper size and type using the
control panel buttons.
To change the paper setting set in the machine, set the paper type from the
Printing preferences window > Paper tab > Paper Type (see "Opening
printing preferences" on page 52).
It may be necessary to press OK to navigate to lower-level menus for some
models.
1 Select (Menu) button on the control panel.
2 Press System Setup > Paper Setup > Paper Size or Paper Type.
3 Select the tray and the option you want.
4 Press OK to save the selection.
5 Press (Stop/Clear) to return to ready mode.
If you want to use special-sized paper such as billing paper, select the Paper
tab > Size > Edit... and set Custom Paper Size Settings in the Printing
Preferences (see "Opening printing preferences" on page 52).
7
Using the output support
The surface of the output tray may become hot if you print a large number
of pages at once. Make sure that you do not touch the surface, and do not
allow children near it.
The printed pages stack on the output support, and the output support will help
the printed pages to align. The printer sends output to the output tray by
default.
Media and tray
2. Menu Overview and Basic Setup 46
Illustrations on this user’s guide may differ from your machine depending
on its options or models. Check your machine type (see "Front view" on
page 20).
8
Preparing originals
• Do not load paper smaller than 142 x 148 mm (5.6 x 5.8 inches) or larger than
216 x 356 mm (8.5 x 14 inches).
• Do not attempt to load the following s of paper, in order to prevent paper
jam, low print quality and machine damage.
- Carbon-paper or carbon-backed paper
- Coated paper
- Onion skin or thin paper
- Wrinkled or creased paper
- Curled or rolled paper
- Torn paper
• Remove all staples and paper clips before loading.
• Make sure any glue, ink, or correction fluid on the paper is completely dry
before loading.
• Do not load originals that include different sizes or weights of paper.
• Do not load booklets, pamphlets, transparencies, or documents with other
unusual characteristics.
Media and tray
2. Menu Overview and Basic Setup 47
9
Loading originals
You can use the scanner glass or the document feeder to load an original for
copying, scanning, and sending a fax.
Illustrations on this user’s guide may differ from your machine depending
on its options or models. Check your machine type (see "Front view" on
page 20).
On the scanner glass
Using the scanner glass, you can copy or scan originals. You can get the best
scan quality, especially for colored or gray-scaled images. Make sure that no
originals are in the document feeder. If an original is detected in the document
feeder, the machine gives it priority over the original on the scanner glass.
1 Lift and open the scanner lid.
Media and tray
2. Menu Overview and Basic Setup 48
2 Place the original face down on the scanner glass. Align it with the
registration guide at the top left corner of the glass.
3 Close the scanner lid.
• Leaving the scanner lid open while copying may affect copy quality and
toner consumption.
• Dust on the scanner glass may cause black spots on the printout. Always
keep it clean (see "Cleaning the machine" on page 77).
• If you are copying a page from a book or magazine, lift the scanner lid
until its hinges are caught by the stopper and then close the lid. If the
book or magazine is thicker than 30 mm, start copying with the scanner
lid open.
• Be careful not to break the scanner glass. You may get hurt.
• Do not put hands while closing the scanner lid. The scanner lid may fall
on your hands and get hurt.
• Do not look the light from inside of the scanner while copying or
scanning. It is harmful to eyes.
In the document feeder
Using the document feeder, you can load up to 40 sheets of paper (80 g/m2, 20
lbs bond) for one job.
1 Flex or fan the edge of the paper stack to separate the pages before
loading originals.
Media and tray
2. Menu Overview and Basic Setup 49
2 Load the original face up into the document feeder input tray. Make sure
that the bottom of the original stack matches the paper size marked on
the document input tray.
3 Adjust the document feeder width guides to the paper size.
Dust on the document feeder glass may cause black lines on the printout.
Always keep the glass clean (see "Cleaning the machine" on page 77).
2. Menu Overview and Basic Setup 50
Basic printing
For special printing features, refer to the Advanced Guide (see "Using
advanced print features" on page 204).
10
Printing
If you are a Mac or Linux operating systems user, refer to the Advanced
Guide (see "Mac printing" on page 212 or "Linux printing" on page 214).
The following Printing Preferences window is for Notepad in Windows 7.
1 Open the document you want to print.
2 Select Print from the File menu.
3 Select your machine from the Select Printer list.
4 The basic print settings including the number of copies and print range
are selected within the Print window.
To take advantage of the advanced printing features, click Properties or
Preferences from the Print window (see "Opening printing preferences" on
page 52).
5 To start the print job, click OK or Print in the Print window.
Basic printing
2. Menu Overview and Basic Setup 51
11
Canceling a print job
If the print job is waiting in the print queue or print spooler, cancel the job as
follows:
• You can access this window by simply double-clicking the machine icon
( ) in the Windows task bar.
• You can also cancel the current job by pressing (Stop/Clear) on the
control panel.
Basic printing
2. Menu Overview and Basic Setup 52
12
Opening printing preferences
• The Printing Preferences window that appears in this user’s guide may
differ depending on the machine in use.
• When you select an option in Printing Preferences, you may see a
warning mark or . An mark means you can select that certain
option but it is not recommended, and an mark means you cannot
select that option due to the machine’s setting or environment.
1 Open the document you want to print.
2 Select Print from the file menu. The Print window appears.
3 Select your machine from the Select Printer.
4 Click Properties or Preferences.
You can check the machine’s current status pressing the Printer Status
button (see "Using Samsung Printer Status" on page 247).
Basic printing
2. Menu Overview and Basic Setup 53
Using a favorite setting
The Presets option, which is visible on each preferences tab except for the
Samsung tab, allows you to save the current preferences for future use.
To save a Presets item, follow these steps:
1 Change the settings as needed on each tab.
2 Enter a name for the item in the Presets input box.
3 Click (Add). When you save Presets, all current driver settings are
saved.
Select more options and click (Update), settings will be added to the
Presets you made. To use a saved setting, select it from the Presets dropdown
list. The machine is now set to print according to the settings you
have selected.To delete saved settings, select it from the Presets dropdown
list and click (Delete).
You can also restore the printer driver’s default settings by selecting
Default Preset from the Presets drop-down list.
13
Using help
Click the option you want to know on the Printing Preferences window and
press F1 on your keyboard.
Basic printing
2. Menu Overview and Basic Setup 54
14
Eco printing
The Eco function cuts toner consumption and paper usage. The Eco function
allows you to save print resources and lead you to eco-friendly printing.
If you press the Eco button from the control panel, eco mode is enabled. The
default setting of Eco mode is Multiple Pages per Side (2) and Toner Save.
Setting Eco mode on the control panel
If your has machine for +/- buttons on the control panel or the machine is
not supported network (see "Control panel overview" on page 23):
You can set the machine’s settings by using the Device Settings in
Samsung Easy Printer Manager program.
• For Windows and Mac users, see "Device Settings" on page 246.
• Accessing menus may differ from model to model (see "Accessing the
menu" on page 31).
• It may be necessary to press OK to navigate to lower-level menus for
some models.
1 Select (Menu) > System Setup > Machine Setup > Eco Settings on
the control panel.
2 Select the option you want and press OK.
• Default Mode: Select this to turn on or off the eco mode. (Toner
save/2-up)
- Off: Set the eco mode off.
- On: Set the eco mode on.
If you set the eco mode on with a password from the SyncThru™ Web
Service (Settings tab > Machine Settings > System > Eco > Settings) or
Samsung Easy Printer Manager (Device Settings > Eco), the On force
message appears. You have to enter the password to change the eco mode
status.
• Select Temp.: Follow the settings from Syncthru™ Web Service or
Samsung Easy Printer Manager. Before you select this item, you must
set the eco function in SyncThru™ Web Service (Settings tab >
Machine Settings > System > Eco > Settings) or Samsung Easy
Printer Manager (Device Settings > Eco).
- Default Eco: The machine is set to Default Eco mode.
- Custom Eco: Change any necessary values.
3 Press OK to save the selection.
Basic printing
2. Menu Overview and Basic Setup 55
Setting eco mode on the driver
Open the Eco tab to set Eco mode. When you see the eco image ( ), that
means the eco mode is currently enabled.
Eco options
• Printer Default: Follows the settings from the machine's control panel.
• None: Disables Eco mode.
• Eco Printing: Enables eco mode. Activate the various Eco items you want to
use.
• Password: If the administrator fixed to enable the Eco mode, you have to
enter the password to change the status.
Result simulator
Result Simulator shows the results of reduced emission of carbon dioxide, used
electricity, and the amount of saved paper in accordance with the settings you
selected.
• The results are calculated on the basis that the total number of printed
paper is one hundred without a blank page when the Eco mode is disabled.
• Refers to the calculation coefficient about CO2, energy, and paper from IEA,
the index of Ministry of Internal Affairs and Communication of Japan and
www.remanufacturing.org.uk. Each model has a different index.
• The power consumption in printing mode refers to the average printing
power consumption of this machine.
• The actual amount displayed is only an estimate as the actual amount may
differ depending on the operating system used, computing performance,
application software, connection method, media type [thickness], media
size, job complexity, etc.
2. Menu Overview and Basic Setup 56
Basic copying
• For special printing features, refer to the Advanced Guide (see "Copy
menu" on page 180).
• Accessing menus may differ from model to model (see "Accessing the
menu" on page 31 or "Control panel overview" on page 23).
• Depending on models or options, some menus may not be supported
(see "Features by models" on page 7).
15
Basic copy
1 Select (copy) > (Menu) > Copy Feature on the control panel.
Or select (Menu) > Copy Feature on the control panel.
2 Place a single document (see "Loading originals" on page 47).
3 If you want to customize the copy settings including Reduce/Enlarge,
Darkness, Original, and more by using the control panel buttons (see
"Changing the settings for each copy" on page 57).
4 Enter the number of copies using the arrow or number keypad, if
necessary.
5 Press (Start).
Basic copying
2. Menu Overview and Basic Setup 57
If you need to cancel the copying job during the operation, press (Stop/
Clear) and the copying will stop.
16
Changing the settings for each copy
Your machine provides default settings for copying so that you can quickly and
easily make a copy. However, if you want to change the options for each copy,
use the copy function buttons on the control panel.
• If you press (Stop/Clear) while setting the copy options, all of the
options you have set for the current copy job will be canceled and
returned to their default status. Or, they will automatically return to their
default status after the machine completes the copy in progress.
• Accessing menus may differ from model to model (see "Accessing the
menu" on page 31).
• It may be necessary to press OK to navigate to lower-level menus for
some models.
Darkness
If you have an original containing faint marking and dark images, you can adjust
the brightness to make a copy that is easier to read.
1 Select (copy) > (Menu) > Copy Feature > Darkness on the
control panel.
Or select Darkness button on the control panel.
2 Select the option you want and press OK.
For example, the Light+5 being the lightest, and the Dark+5 being the
darkest.
3 Press (Stop/Clear) to return to ready mode.
Original
The original setting is used to improve the copy quality by selecting the
document for the current copy job.
1 Select (copy) > (Menu) > Copy Feature > Original Type on the
control panel.
Or select (Menu) > Copy Feature > Original Type on the control
panel.
2 Select the option you want and press OK.
Basic copying
2. Menu Overview and Basic Setup 58
• Text: Use for originals containing mostly text.
• Text/Photo: Use for originals with mixed text and photographs.
If texts in the printout is blurry, select Text to get the clear texts.
• Photo: Use when the originals are photographs.
3 Press (Stop/Clear) to return to ready mode.
Reduced or enlarged copy
You can reduce or enlarge the size of a copied image from 25% to 400% when
you copy original documents from the scanner glass.
• This feature may not be available depending on model or optionalgoods
(see "Variety feature" on page 9).
• If the machine set to Eco mode, reduce and enlarge features are
notavailable.
To select from the predefined copy sizes
1 Select (copy) > (Menu) > Copy Feature > Reduce/Enlarge on
the control panel.
Or select (Menu) > Copy Feature > Reduce/Enlarge on the control
panel.
2 Select the option you want and press OK.
3 Press (Stop/Clear) to return to ready mode.
To scale the copy by directly entering the scale rate
1 Select (copy) > (Menu) > Copy Feature > Reduce/Enlarge >
Custom on the control panel.
Or select (Menu) > Copy Feature > Reduce/Enlarge on the control
panel.
2 Enter the copy size you want using the numeric keypad.
3 Press OK to save the selection.
4 Press (Stop/Clear) to return to ready mode.
When you make a reduced copy, black lines may appear at the bottom of
your copy.
Basic copying
2. Menu Overview and Basic Setup 59
17
ID card copying
Your machine can print 2-sided originals on one sheet.
The machine prints one side of the original on the upper half of the paper and
the other side on the lower half without reducing the size of the original. This
feature is helpful for copying a small-sized item such as business card.
• The original must be placed on the scanner glass to use this feature.
• If the machine set to Eco mode, this feature is not available.
• For better image quality, Select (copy) > (Menu) > Copy
Feature > Original Type > Photo on the control panel or (Menu) >
Copy Feature > Original Type > Photo.
1 Press ID Copy on the control panel.
2 Place the front side of an original facing down on the scanner glass
where arrows indicate as shown. Then, close the scanner lid.
3 Place Front Side and Press [Start] appears on the display.
4 Press Start.
Your machine begins scanning the front side and shows Place Back Side
and Press [Start].
Basic copying
2. Menu Overview and Basic Setup 60
5 Turn the original over and place it on the scanner glass where arrows
indicate as shown. Then, close the scanner lid.
6 Press Start.
• If you do not press the (Start) button, only the front side will be
copied.
• If the original is larger than the printable area, some portions may not be
printed.
2. Menu Overview and Basic Setup 61
Basic scanning
For special scanning features, refer to the Advanced Guide (see "Scan
features" on page 216).
18
Basic Scanning
This is the normal and usual procedure for scanning originals.
This is a basic scanning method for USB-connected machine.
• It may be necessary to press OK to navigate to lower-level menus for
some models.
• If you want to scan using the network, refer to the Advanced Guide (see
"Scanning from network connected machine" on page 217).
1 Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 47).
2 Select (scan) > Scan to PC on the control panel.
OR
Press Scan to on the control panerl.
If you see Not Available message, check the port connection, or select
Enable Scan from Device Panel in Samsung Easy Printer Manager >
Switch to advanced mode > Scan to PC Settings.
3 Select the scan destination you want and press OK.
Default setting is My Documents.
• You can create and save the frequently used settings as a profile list. Also
you can add and delete the profile and save each profile to a different
path.
• To change the Samsung Easy Printer Manager > Switch to
advanced mode > Scan to PC Settings.
4 Select the option you want and press OK.
5 Scanning begins.
Scanned image is saved in computer’s C:\Users\users name\My
Documents. The saved folder may differ, depending on your operating
system or the application you are using.
2. Menu Overview and Basic Setup 62
Basic faxing
• This function is not supported for M207x series (see "Control panel
overview" on page 23).
• For special faxing features, refer to the Advanced Guide (see "Fax
features" on page 225).
• You cannot use this machine as a fax via the internet phone. For more
information ask your internet service provider.
• We recommend using traditional analog phone services (PSTN: Public
Switched Telephone Network) when connecting telephone lines to use
a fax machine. If you use other Internet services (DSL, ISDN, VolP), you can
improve the connection quality by using the Micro-filter. The Micro-filter
eliminates unnecessary noise signals and improves connection quality or
Internet quality. Since the DSL Micro-filter is not provided with the
machine, contact your Internet service provider for use on DSL Microfilter.
1 Line port
2 Micro filter
3 DSL modem / Telephone line
(see "Rear view" on page 22).
19
Preparing to fax
Before you send or receive a fax, you need to connect the supplied line cord to
your telephone wall jack (see "Rear view" on page 22). Refer to the Quick
Installation Guide how to make a connection. The method of making a
telephone connection is different from one country to another.
20
Sending a fax
When you place the originals, you can use either the document feeder or
the scanner glass. If the originals are placed on both the document feeder
and the scanner glass, the machine will read the originals on the document
feeder first, which has higher priority in scanning.
1 Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 47).
2 Select (fax) on the control panel.
3 Adjust the resolution and the darkness to suit your fax needs (see
"Adjusting the document settings" on page 64).
Basic faxing
2. Menu Overview and Basic Setup 63
4 Enter the destination fax number (see "Keypad letters and numbers" on
page 197).
5 Press (Start) on the control panel. The machine starts to scan and
send the fax to the destinations.
• If you want to send a fax directly from your computer, use Samsung
Network PC Fax (see "Sending a fax in the computer" on page 226).
• When you want to cancel a fax job, press (Stop/Clear) before the
machine starts transmission.
• If you used the scanner glass, the machine shows the message asking to
place another page.
Sending a fax manually
Perform the following to send a fax using (On Hook Dial) on the control
panel.
1 Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 47).
2 Select (fax) on the control panel.
3 Adjust the resolution and the darkness to suit your fax needs (see
"Adjusting the document settings" on page 64).
4 Press (On Hook Dial) on the control panel.
5 Enter a fax number using the number keypad on the control panel.
6 Press (Start) on the control panel when you hear a high-pitched fax
signal from the remote fax machine.
Sending a fax to multiple destinations
You can use the multiple send feature, which allows you to send a fax to multiple
locations. Originals are automatically stored in memory and sent to a remote
station. After transmission, the originals are automatically erased from memory.
You cannot send faxes with this feature if you chosen super fine as an option
or if the fax is in color.
1 Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 47).
2 Select (fax) on the control panel.
3 Adjust the resolution and the darkness to suit your fax needs (see
"Adjusting the document settings" on page 64).
4 Select (Menu) > Fax Feature > Multi Send on the control panel.
Basic faxing
2. Menu Overview and Basic Setup 64
5 Enter the number of the first receiving fax machine and press OK.
You can press speed dial numbers or select a group dial number using
the (Address book) button.
6 Enter the second fax number and press OK.
The display asks you to enter another fax number to send the document.
7 To enter more fax numbers, press OK when Yes appears and repeat
steps 5 and 6.
• You can add up to 10 destinations.
• Once you have entered a group dial number, you cannot enter another
group dial number.
8 When you have finished entering fax numbers, select No at the Another
No.? prompt and press OK.
The machine begins sending the fax to the numbers you entered in the
order in which you entered them.
Multi send report is printed after sending faxes.
21
Receiving a fax
Your machine is preset Fax mode at the factory. When you receive a fax, the
machine answers the call on a specified number of rings and automatically
receives the fax.
22
Adjusting the document settings
Before starting a fax, change the following settings according to your original’s
status to get the best quality.
It may be necessary to press OK to navigate to lower-level menus for some
models.
Resolution
The default document settings produce good results when using typical textbased
originals. However, if you send originals that are of poor quality, or
contain photographs, you can adjust the resolution to produce a higher quality
fax.
Basic faxing
2. Menu Overview and Basic Setup 65
1 Select (fax) > (Menu) > Fax Feature > Resolution on the control
panel.
2 Select the option you want and press OK.
• Standard: Originals with normal sized characters.
• Fine: Originals containing small characters or thin lines or originals
printed using a dot-matrix printer.
• Super Fine: Originals containing extremely fine detail. Super Fine
mode is enabled only if the machine with which you are
communicating also supports the Super Fine resolution.
• For memory transmission, Super Fine mode is not available. The
resolution setting is automatically changed to Fine.
• When your machine is set to Super Fine resolution and the fax machine
with which you are communicating does not support Super Fine
resolution, the machine transmits using the highest resolution mode
supported by the other fax machine.
• Photo Fax: Originals containing shades of gray or photographs.
• Color Fax: Original with colors.
• Memory transmission is not available in this mode.
• You can only send a color fax if the machine you are communicating with
supports color fax reception and you send the fax manually.
3 Press (Stop/Clear) to return to ready mode.
Darkness
You can select the degree of darkness of the original document.
The darkness setting is applied to the current fax job. To change the default
setting (see "Fax menu" on page 182).
1 Select (fax) > (Menu) > Fax Feature > Darkness on the control
panel.
2 Select a darkness level you want.
3 Press (Stop/Clear) to return to ready mode.
3. Maintenance
This chapter provides information about purchasing supplies, accessories and maintenance parts available for your
machine.
• Ordering supplies and accessories 67
• Available supplies 68
• Storing the toner cartridge 69
• Redistributing toner 71
• Toner cartridge 73
• Monitoring the supplies life 75
• Setting the toner low alert 76
• Cleaning the machine 77
• Tips for moving & storing your machine 83
3. Maintenance 67
Ordering supplies and accessories
Available accessories may differ from country to country. Contact your sales representatives to obtain the list of available supplies, and maintenance parts.
To order Samsung-authorized supplies, accessories, and maintenance parts, contact your local Samsung dealer or the retailer where you purchased your machine.
You can also visit www.samsung.com/supplies, and then select your country/region to obtain the contact information for service.
3. Maintenance 68
Available supplies
When supplies reach the end of their life spans, you can order the followings of supplies for your machine:
Depending on the options, percentage of image area and job mode used, the toner cartridge’s lifespan may differ.
When purchasing new toner cartridges or other supplies, these must be purchased in the same country as the machine you are using. Otherwise, new toner
cartridges or other supplies will be incompatible with your machine due to different configurations of toner cartridges and other supplies according to the specific
country conditions.
Samsung does not recommend using non-genuine Samsung toner cartridge such as refilled or remanufactured toner. Samsung cannot guarantee non-genuine
Samsung toner cartridge's quality. Service or repair required as a result of using non-genuine Samsung toner cartridges will not be covered under the machine’s
warranty.
Type Average yielda
a. Declared yield value in accordance with ISO/IEC 19752. The number of pages may be affected by operating environment, printing interval, graphics, media type and media size.
Part name
Toner cartridge Approx. 1,000 pages MLT-D111S
3. Maintenance 69
Storing the toner cartridge
Toner cartridges contain components that are sensitive to light, temperature
and humidity. Samsung suggests users follow these recommendations to
ensure optimal performance, highest quality, and longest life from your new
Samsung toner cartridge.
Store this cartridge in the same environment in which the printer will be used.
This should be in controlled temperature and humidity conditions. The toner
cartridge should remain in its original and unopened package until installation
– if original packaging is not available, cover the top opening of the cartridge
with paper and store in a dark cabinet.
Opening the cartridge package prior to use dramatically shortens its useful shelf
and operating life. Do not store on the floor. If the toner cartridge is removed
from the printer, follow the instructions below to store the toner cartridge
properly.
• Store the cartridge inside the protective bag from the original package.
• Store lying flat (not standing on end) with the same side facing up as if it
were installed in the machine.
• Do not store consumables in any of the following conditions:
- Temperature greater than 40°C (104°F).
- Humidity range less than 20% or greater than 80%.
- An environment with extreme changes in humidity or temperature.
- Direct sunlight or room light.
- Dusty places.
- A car for a long period of time.
- An environment where corrosive gases are present.
- An environment with salty air.
1
Handling instructions
• Do not touch the surface of the photoconductive drum in the cartridge.
• Do not expose the cartridge to unnecessary vibrations or shock.
• Never manually rotate the drum, especially in the reverse direction; this can
cause internal damage and toner spillage.
2
Toner cartridge usage
Samsung Electronics does not recommend or approve the use of non-Samsung
brand toner cartridges in your printer including generic, store brand, refilled, or
remanufactured toner cartridges.
Samsung’s printer warranty does not cover damage to the machine caused
by the use of a refilled, remanufactured, or non-Samsung brand toner
cartridges.
Storing the toner cartridge
3. Maintenance 70
3
Estimated cartridge life
Estimated cartridge life (the life of the toner cartridge yield) depends on the
amount of toner that print jobs require. The actual print yield may vary
depending on the print density of the pages you print on, operating
environment, percentage of image area, printing interval, media type and/or
media size. For example, if you print a lot of graphics, the consumption of the
toner is higher and you may need to change the cartridge more often.
3. Maintenance 71
Redistributing toner
When the toner cartridge is near the end of its life:
• White streaks or light printing occurs and/or density variation side to side.
• The Status LED blinks red.
If this happens, you can temporarily improve print quality by redistributing the remaining toner in the cartridge. In some cases, white streaks or light printing will still
occur even after you have redistributed the toner.
Illustrations in this user’s guide may differ from your machine depending on the model and options installed. Check your machine type (see "Front view" on page 20).
• To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. Cover it with a piece of paper, if necessary.
• Do not touch the green area of the toner cartridge. Use the handle on the cartridge to avoid touching this area.
• Do not use sharp objects such as a knife or scissors to open the toner cartridge package. They might scratch the drum of the cartridge.
• If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.
• When opening a scan unit, hold the document feeder and scan unit together.
Redistributing toner
3. Maintenance 72
2
1
3. Maintenance 73
Replacing the toner cartridge
4
Toner cartridge
Click this link to open an animation about replacing a toner cartridge.
• Shake the toner cartridge thoroughly, it will increase the initial print quality.
• Illustrations in this user’s guide may differ from your machine depending on the model and options installed. Check your machine type (see "Front view" on page
20).
• To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. Cover it with a piece of paper, if necessary.
• Do not touch the green area of the toner cartridge. Use the handle on the cartridge to avoid touching this area.
• Do not use sharp objects such as a knife or scissors to open the toner cartridge package. They might scratch the drum of the cartridge.
• If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.
• When opening a scan unit, hold the document feeder and scan unit together.
When a toner cartridge has reached the end of life, the machine will stop printing.
Replacing the toner cartridge
3. Maintenance 74
3. Maintenance 75
Monitoring the supplies life
If you experience frequent paper jams or printing problems, check the number of pages the machine has printed or scanned. Replace the corresponding parts, if
necessary.
1 Select (Menu) > System Setup > Report > Supplies Info. on the control panel.
2 Select the option you want and press OK.
• Total: Displays the total number of pages printed.
• ADF Scan: Displays the number of pages printed by using the document feeder.
• Platen Scan: Displays the number of pages scanned by using scanner glass.
• Supplies Info.: Prints the supply information page.
3 Press (Stop/Clear) to return to ready mode.
3. Maintenance 76
Setting the toner low alert
If the amount of toner in the cartridge is low, a message or LED informing the user to change the toner cartridge appears. You can set the option for whether or not
this message or LED appears.
• Accessing menus may differ from model to model (see "Accessing the menu" on page 31).
• It may be necessary to press OK to navigate to lower-level menus for some models.
• You can set the machine’s settings by using the Device Settings in Samsung Easy Printer Manager program.
- For Windows and Mac users, you set from Samsung Easy Printer Manager > (Switch to advanced mode) > Device Settings.
1 Select (Menu) > System Setup > Maintenance > TonerLowAlert on the control panel.
2 Select the option you want.
3 Press OK to save the selection.
3. Maintenance 77
Cleaning the machine
If printing quality problems occur or if you use your machine in a dusty environment, you need to clean your machine regularly to keep it in the best printing
condition and use your machine longer.
• Cleaning the cabinet of the machine with cleaning materials containing large amounts of alcohol, solvents, or other strong substances can discolor or distort the
cabinet.
• If your machine or the surrounding area is contaminated with toner, we recommend you use a cloth or tissue dampened with water to clean it. If you use a vacuum
cleaner, toner blows in the air and might be harmful to you.
5
Cleaning the outside
Clean the machine cabinet with a soft, lint-free cloth. Dampen the cloth slightly with water, but be careful not to let any water drip onto or into the machine.
Cleaning the machine
3. Maintenance 78
6
Cleaning the inside
During the printing process, paper, toner, and dust particles can accumulate inside the machine. This buildup can cause print quality problems, such as toner specks
or smearing. Cleaning the inside of the machine clears and reduces these problems.
• To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. Cover it with a piece of paper, if necessary.
• Do not touch the green area of the toner cartridge. Use the handle on the cartridge to avoid touching this area.
• Use a dry lint free cloth when cleaning the inside of the machine, be careful not to damage the transfer roller or any other inside parts. Do not use solvents such
as benzene or thinner. Printing quality problems can occur and cause damage to the machine.
• Use a dry lint-free cloth to clean the machine.
• Turn the machine off and unplug the power cord. Wait for the machine to cool down. If your machine has a power switch, turn the power switch off before
cleaning the machine.
• Illustrations in this user’s guide may differ from your machine depending on the model and options installed. Check your machine type (see "Front view" on page
20).
• When opening a scan unit, hold the document feeder and scan unit together.
Cleaning the machine
3. Maintenance 79
2
1
Cleaning the machine
3. Maintenance 80
7
Cleaning the pickup roller
• Turn the machine off and unplug the power cord. Wait for the machine to cool down. If your machine has a power switch, turn the power switch off before
cleaning the machine.
• Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Front view" on page 20).
Cleaning the machine
3. Maintenance 81
8
Cleaning the scan unit
Keeping the scan unit clean helps ensure the best possible copies. We suggest that you clean the scan unit at the start of each day and during the day as needed.
• Turn the machine off and unplug the power cord. Wait for the machine to cool down. If your machine has a power switch, turn the power switch off before
cleaning the machine.
• Illustrations on this user’s guide may differ from your machine depending on its options or models. Check your machine type (see "Front view" on page 20).
1 Slightly dampen a soft, lint-free cloth or paper towel with water.
2 Lift and open the scanner lid.
Cleaning the machine
3. Maintenance 82
3 Wipe the surface of the scanner until it is clean and dry.
1 Scanner lid
2 Scanner glass
3 Document feeder glass
4 White Sheet
4 Close the scanner lid.
1
2
4
3
3. Maintenance 83
Tips for moving & storing your machine
• When moving the machine, do not tilt or turn it upside down. Otherwise, the inside of the machine may be contaminated by toner, which can cause damage to
the machine or reduce print quality.
• When moving the machine, make sure at least two people are holding the machine securely.
4. Troubleshooting
This chapter gives helpful information for what to do if you encounter an error.
• Tips for avoiding paper jams 85
• Clearing original document jams 86
• Clearing paper jams 91
• Understanding the status LED 95
• Understanding display messages 98
This chapter gives helpful information for what to do if you encounter an error. If your machine
has a display screen, check the message on the display screen first to solve the error.If you
cannot find a solution to your problem in this chapter, refer to the Troubleshooting chapter in
the Advanced Guide (see "Troubleshooting" on page 249).If you cannot find a solution in the
User's Guide or the problem persists, call for service.
4. Troubleshooting 85
Tips for avoiding paper jams
By selecting the correct media s, most paper jams can be avoided. To avoid paper jams, refer to the following guidelines:
• Ensure that the adjustable guides are positioned correctly (see "Tray overview" on page 38).
• Do not remove paper from the tray while your machine is printing.
• Flex, fan, and straighten paper before loading.
• Do not use creased, damp, or highly curled paper.
• Do not mix papers in a tray.
• Use only recommended print media (see "Print media specifications" on page 106).
4. Troubleshooting 86
Clearing original document jams
When an original document jams in the document feeder, a warning message appears on the display.
To avoid tearing the document, remove the jammed document slowly and carefully.
To prevent document jams, use the scanner glass for thick, thin or mixed paper- originals.
Clearing original document jams
4. Troubleshooting 87
1
Original paper jam in front of scanner
• Illustrations in this user’s guide may differ from your machine depending on the model and options installed. Check your machine type (see "Front view" on page
20).
• This troubleshooting may not be available depending on model or optional goods (see "Variety feature" on page 9).
Clearing original document jams
4. Troubleshooting 88
2
Original paper jam inside of scanner
• Illustrations in this user’s guide may differ from your machine depending on the model and options installed. Check your machine type (see "Front view" on page
20).
• This troubleshooting may not be available depending on model or optional goods (see "Variety feature" on page 9).
Clearing original document jams
4. Troubleshooting 89
Clearing original document jams
4. Troubleshooting 90
3
Original paper jam in exit area of scanner
• Illustrations in this user’s guide may differ from your machine depending on the model and options installed. Check your machine type (see "Front view" on page
20).
• This troubleshooting may not be available depending on model or optional goods (see "Front view" on page 20).
1 Remove any remaining pages from the document feeder.
2 Gently remove the jammed paper from the document feeder.
4. Troubleshooting 91
Clearing paper jams
To avoid tearing the paper, pull the jammed paper out slowly and gently.
4
In tray
Click this link to open an animation about clearing a jam.
Illustrations in this user’s guide may differ from your machine depending on the model and options installed. Check your machine type (see "Front view" on page 20).
Clearing paper jams
4. Troubleshooting 92
5
Inside the machine
Click this link to open an animation about clearing a jam.
• The fuser area is hot. Take care when removing paper from the machine.
• Illustrations in this user’s guide may differ from your machine depending on the model and options installed. Check your machine type (see "Front view" on page
20).
Clearing paper jams
4. Troubleshooting 93
2
1
Clearing paper jams
4. Troubleshooting 94
If you do not see the paper in this area, stop and go to next step:
4. Troubleshooting 95
Understanding the status LED
The color of the LED indicates the machine's current status.
• Some LEDs may not be available depending on model or country (see "Control panel overview" on page 23).
• To resolve the error, look at the error message and its instructions from the troubleshooting part (see "Understanding display messages" on page 98).
• If the problem persists, call a service representative.
Understanding the status LED
4. Troubleshooting 96
LED Status Description
Status
Off The machine is off-line.
Green
Blinking When the backlight blinks, the machine is receiving or printing data.
On • The machine is on-line and can be used.
Red
Blinking
• A minor error has occurred and the machine is waiting for the error to be cleared. Check the display message. When the problem
is cleared, the machine resumes.
• Small amount of toner is left in the cartridge. The estimated cartridge lifea
of toner is close. Prepare a new cartridge for
replacement. You may temporarily increase the printing quality by redistributing the toner (see "Redistributing toner" on page
71).b
On
• A toner cartridge has almost reached its estimated cartridge lifea
. It is recommended to replace the toner cartridge (see "Toner
cartridge" on page 73).
• The cover is opened. Close the cover.
• There is no paper in the tray when receiving or printing data. Load paper in the tray.
• The machine has stopped due to a major error. Check the display message (see "Understanding display messages" on page 98).
• A paper jam has occurred (see "Clearing paper jams" on page 91).
Blue
Blinking The machine is connecting to a wireless network.
On The machine is connected to a wireless network (see "Wireless network setup" on page 148).
Orange
Blinking Small amount of toner is left in the cartridge. The estimated cartridge lifea
of toner is close. Prepare a new cartridge for
replacement.You may temporarily increase the printing quality by redistributing the toner (see "Redistributing toner" on page 71)
On A toner cartridge has almost reached its estimated cartridge lifea
. It is recommended to replace the toner cartridge (see "Toner
cartridge" on page 73).
Understanding the status LED
4. Troubleshooting 97
(
Power/
Wakeup )
Blue
On The machine is in power save mode.
Off The machine is in ready mode or machine’s power is off.
Eco Green
On Eco mode is on.
The default setting of Eco mode is 2-up and toner save.
Off Eco mode is off.
a. Estimated cartridge life means the expected or estimated toner cartridge life, which indicates the average capacity of print-outs and is designed pursuant to ISO/IEC 19752. The number of pages
may be affected by operating environment, percentage of image area, printing interval, graphics, media and media size. Some amount of toner may remain in the cartridge even when red LED is
on and the printer stops printing.
b. Some LEDs may not be available depending on model or country (see "Control panel overview" on page 23).
LED Status Description
4. Troubleshooting 98
Understanding display messages
Messages appear on the control panel display to indicate the machine’s status or errors. Refer to the tables below to understand the messages’ and their meaning,
and correct the problem, if necessary.
• If a message is not in the table, reboot the power and try the printing job again. If the problem persists, call a service representative.
• When you call for service, provide the service representative with the contents of display message.
• Some messages may not appear depending on the model and options installed.
• [error number] indicates the error number.
6
Paper Jam-related messages
Message Meaning Suggested solutions
Document jam.
Remove jam
The loaded original document has jammed in the document
feeder.
Clear the jam (see "Clearing original document jams" on page 86).
Jam or empty
Door open&close
• Paper has jammed in the paper feed area.
• There is no paper in tray.
• Clear the jam (see "In tray" on page 91).
• Load paper in tray (see "Loading paper in the tray" on page 39).
Paper Jam
inside machine
Paper has jammed in the inside machine. Clear the jam (see "Inside the machine" on page 92).
Understanding display messages
4. Troubleshooting 99
7
Toner-related messages
Message Meaning Suggested solutions
Install Toner
Cartridge
A toner cartridge is not installed. Install a toner cartridge.
Not Compatible
Toner cartridge
The toner cartridge you have installed is not for your machine. Install a Samsung-genuine toner cartridge, designed for your
machine.
Prepare new cartridge Small amount of toner is left in the indicated cartridge. The
estimated cartridge life of toner is close.
Prepare a new cartridge for a replacement. You may temporarily
increase the printing quality by redistributing the toner (see
"Redistributing toner" on page 71).
Understanding display messages
4. Troubleshooting 100
Replace new cartridge The indicated toner cartridge has almost reached its estimated
cartridge life.
Estimated cartridge life means the expected or
estimated toner cartridge life, which indicates the
average capacity of print-outs and is designed pursuant
to ISO/IEC 19752 (see "Available supplies" on page 68).
The number of pages may be affected by operating
environment, percentage of image area, printing
interval, media, percentage of image area, and media
size. Some amount of toner may remain in the cartridge
even when replace new cartridge appears and the
machine stops printing.
• You can choose Stop or Continue as shown on the control panel.
If you select Stop, the printer stops printing and you cannot print
any more without changing the cartridge. If you select Continue,
the printer keeps printing but the printing quality cannot be
guaranteed.
• Replace the toner cartridge for the best print quality when this
message appears. Using a cartridge beyond this stage can result in
printing quality issues (see "Toner cartridge" on page 73).
Samsung does not recommend using a non-genuine
Samsung toner cartridge such as refilled or remanufactured.
Samsung cannot guarantee a non-genuine Samsung toner
cartridge's quality. Service or repair required as a result of
using non-genuine Samsung toner cartridges will not be
covered under the machine warranty.
The indicated toner cartridge has reached its estimated
cartridge life. The machine might stop printing.
Replace the toner cartridge (see "Toner cartridge" on page 73).
Message Meaning Suggested solutions
Understanding display messages
4. Troubleshooting 101
8
Tray-related messages
9
Network-related messages
10
Misc. messages
Message Meaning Suggested solutions
Jam or empty
Door open&close
• Paper has jammed in the paper feed area.
• There is no paper in tray.
• Clear the jam (see "In tray" on page 91).
• Load paper in tray (see "Loading paper in the tray" on page 39).
Message Meaning Suggested solutions
Network Problem:
IP Conflict
The network IP address you have set is being used by
someone else.
Check the IP address and reset it if necessary (see "Printing a network
configuration report" on page 137).
#S6-3210 Wireless module is not installed. Turn off then on.
Message Meaning Suggested solutions
Door Open
Close it
The cover is not securely latched. Close the cover until it locks into place.
Understanding display messages
4. Troubleshooting 102
Door of scanner is open. The document feeder cover is not securely latched. Close the cover until it locks into place.
Error [error number]
Turn off then on
The machine unit cannot be controlled. Reboot the power and try the printing job again. If the problem
persists, please call for service.
Error [error number]
Call for service
Scanner Locked The scanner is locked. Reboot the power. If the problem persists, please call for service.
Message Meaning Suggested solutions
5. Appendix
This chapter provides product specifications and information concerning applicable regulations.
• Specifications 104
• Regulatory information 113
• Copyright 126
5. Appendix 104
Specifications
1
General specifications
The specification values listed below are subject to change without notice. See www.samsung.com for possible changes in information.
Items Description
Dimensiona Width x Length x Height M207x series
M207xW series
406 x 359.6x 253 mm (15.98 x 14.16 x 9.96 inches)
M207xF series / M207xFW series
M207xFH series / M207xHW series
406 x 359.6x 308.7mm (15.98 x 14.16 x 12.15 inches)
Weighta Machine with consumables M207x series
M207xW series
7.4 Kg (16.31 lbs)
M207xF series / M207xFW series
M207xFH series / M207xHW series
8.47 Kg (18.67lbs)
Noise Levelb Ready mode Less than 26 dB (A)
Print mode Less than 50 dB (A)
Copy mode Scanner glass Less than 50 dB (A)
Document feeder Less than 53 dB (A)
Scan mode Scanner glass Less than 52 dB (A)
Document feeder Less than 54 dB (A)
Specifications
5. Appendix 105
Temperature Operation 10 to 32°C (50 to 89.6°F)
Storage (packed) -20 to 40°C (-4 to 104°F)
Humidity Operation 20 to 80% RH
Storage (packed) 10 to 90% RH
Power ratingc 110 volt models AC 110 - 127 V
220 volt models AC 220 - 240 V
Power consumption Average operating mode Less than 310 W
Ready mode Less than 30 W
Power save moded • M207x series: Less than 1.5 W
• M207xW series: Less than 2.1 W ( Wi-Fi Direct off :Less than 1.8 W )
• M207xF series / M207xFH series: Less than 1.9 W
• M207xFW series / M207xHW series: Less than 2.5 W ( Wi-Fi Direct off :Less than 2.3 W )
Power off modee Less than 0.45 W
Wirelessf Module T77H262/SPW-B4319S
a. Dimensions and weight are measured without a handset and other accessories.
b. Sound Pressure Level, ISO 7779. Configuration tested: basic machine installation, A4 paper, simplex printing.
c. See the rating label on the machine for the correct voltage (V), frequency (hertz) and of current (A) for your machine.
d. The power consumption of power save mode may be affected by machine's status, setting conditions, operating environment.
e. Power consumption can be completely avoided only when the power cable is not connected.
f. Wireless models only (see "Features by models" on page 7).
Items Description
Specifications
5. Appendix 106
2
Print media specifications
Type Size Dimensions
Print media weight/Capacitya
Tray Manual feeding in trayb
Plain
Letter 216 x 279 mm (8.5 x 11 inches) 71 to 85 g/m2 (19 to 23 lbs bond)
• 150 sheets of 80 g/m2 (21 lbs
bond)
71 to 85 g/m2 (19 to 23 lbs bond)
Legal 216 x 356 mm (8.5 x 14 inches) • 1 sheet
Folio 216 x 330 mm (8.5 x 13 inches)
A4 210 x 297 mm (8.27 x 11.69 inches)
Oficio 216 x 343 mm (8.5 x 13.5 inches)
B5(JIS) 182 x 257 mm (7.17 x 10.12 inches)
B5(ISO) 176 x 250 mm (6.93 x 9.84 inches)
Executive 184 x 267 mm (7.25 x 10.5 inches)
A5 148 x 210 mm (5.83 x 8.27 inches)
Envelope
Monarch Envelope 98 x 191 mm (3.87 x 7.5 inches) 75 to 90 g/m2 (20 to 24 lbs bond)
• 10 sheets
75 to 90 g/m2 (20 to 24 lbs bond)
No. 10 Envelope 105 x 241 mm (4.12 x 9.5 inches) • 1 sheet
DL Envelope 110 x 220 mm (4.33 x 8.66 inches)
C5 Envelope 162 x 229 mm (6.38 x 9.02 inches)
Specifications
5. Appendix 107
Thick Refer to the Plain
section
Refer to the Plain section 86 to 120 g/m2 (23 to 32 lbs
bond)
• 50 sheets of 120 g/m2 (32 lbs
bond)
86 to 120 g/m2 (23 to 32 lbs bond)
• 1 sheet
Thin Refer to the Plain
section
Refer to the Plain section 60 to 70 g/m2 (16 to 19 lbs bond)
• 160 sheets of 60 g/m2 (16 lbs
bond)
60 to 70 g/m2 (16 to 19 lbs bond)
• 1 sheet
Cotton Refer to the Plain
section
Refer to the Plain section 75 to 90 g/m2 (20 to 24 lbs bond)
• 150 sheets of 80 g/m2 (21 lbs
bond)
75 to 90 g/m2 (20 to 24 lbs bond)
• 1 sheet
Colored Refer to the Plain
section
Refer to the Plain section 75 to 90 g/m2 (20 to 24 lbs bond)
• 150 sheets of 80 g/m2 (21 lbs
bond)
75 to 90 g/m2 (20 to 24 lbs bond)
• 1 sheet
Preprinted Refer to the Plain
section
Refer to the Plain section 75 to 90 g/m2 (20 to 24 lbs bond)
• 150 sheets of 80 g/m2 (21 lbs
bond)
75 to 90 g/m2 (20 to 24 lbs bond)
• 1 sheet
Recycled Refer to the Plain
section
Refer to the Plain section 60 to 90 g/m2 (16 to 24 lbs bond)
• 150 sheets of 80 g/m2 (21 lbs
bond)
60 to 90 g/m2 (16 to 24 lbs bond)
• 1 sheet
Type Size Dimensions
Print media weight/Capacitya
Tray Manual feeding in trayb
Specifications
5. Appendix 108
Labelsc
Letter, Legal, Oficio,
Folio, A4, B5(JIS),
B5(ISO), Executive,
A5
Refer to the Plain section 120 to 150 g/m2 (32 to 40 lbs
bond)
• 10 sheets
120 to 150 g/m2 (32 to 40 lbs bond)
• 1 sheet
CardStock
Letter, Legal, Oficio,
Folio, A4, B5(JIS),
B5(ISO), Executive,
A5,
Postcard 4x6
Refer to the Plain section 121 to 163 g/m2 (32 to 43 lbs
bond)
• 10 sheets
121 to 163 g/m2 (32 to 43 lbs bond)
• 1 sheet
Bond Refer to the Plain
section
Refer to the Plain section • 10 sheets • 1 sheet
Archive Refer to the Plain
section
Refer to the Plain section • 100 sheets • 1 sheet
Minimum size (custom) 76 x 127 mm (3 x 5 inches) 60 to 163 g/m2 (16 to 43 lbs bond)
Maximum size (custom) 216 x 356 mm (8.5 x 14 inches)
a. Maximum capacity may differ depending on media weight, thickness, and environmental conditions.
b. 1 sheet for manual feeding.
c. The smoothness of the labels used in this machine is 100 to 250 (sheffield). This means the numeric level of smoothness.
Type Size Dimensions
Print media weight/Capacitya
Tray Manual feeding in trayb
Specifications
5. Appendix 109
3
System requirements
Microsoft® Windows®
Operating system
Requirement (recommended)
CPU RAM free HDD space
Windows® XP Intel® Pentium® III 933 MHz (Pentium IV 1 GHz) 128 MB (256 MB) 1.5 GB
Windows Server® 2003 Intel® Pentium® III 933 MHz (Pentium IV 1 GHz) 128 MB (512 MB) 1.25 GB to 2 GB
Windows Server® 2008 Intel® Pentium® IV 1 GHz (Pentium IV 2 GHz) 512 MB (2 GB) 10 GB
Windows Vista® Intel® Pentium® IV 3 GHz 512 MB (1 GB) 15 GB
Windows® 7 Intel® Pentium® IV 1 GHz 32-bit or 64-bit processor or higher 1 GB (2 GB) 16 GB
• Support for DirectX® 9 graphics with 128 MB memory (to enable the Aero theme).
• DVD-R/W Drive
Windows Server® 2008 R2 Intel® Pentium® IV 1.4 GHz (x64) or 1.4 GHz (x64) processors (2 GHz or faster) 512 MB (2 GB) 10 GB
Windows® 8
Windows® 8.1
Intel® Pentium® IV 1 GHz 32-bit or 64-bit processor or higher 2 GB 20 GB
• Support for DirectX® 9 graphics with 128 MB memory (to enable the Aero theme).
• DVD-R/W Drive
Windows Server® 2012
Windows Server® 2012 R2
Intel® Pentium® IV 1.4 GHz (x64) or 1.4 GHz (x64) processors (2 GHz or faster) 512 MB (2 GB) 32 GB
Specifications
5. Appendix 110
• Internet Explorer 6.0 or higher is the minimum requirement for all Windows operating systems.
• Users who have administrator rights can install the software.
• Windows Terminal Services is compatible with your machine.
• For Windows 2000, Services Pack 4 or higher is required.
Mac
Operating system
Requirements (Recommended)
CPU RAM Free HDD space
Mac OS X 10.5 • Intel® processors
• 867 MHz or faster Power PC G4/G5
512 MB (1 GB) 1 GB
Mac OS X 10.6 • Intel® processors 1 GB (2 GB) 1 GB
Mac OS X 10.7 ~ 10.9 • Intel® processors 2 GB 4 GB
Specifications
5. Appendix 111
Linux
Items Requirements
Operating system Redhat® Enterprise Linux 5, 6
Fedora 11, 12, 13, 14, 15, 16, 17, 18
SuSE Linux 10.1 (32 bit)
OpenSuSE® 11.0, 11.1, 11.2, 11.3, 11.4, 12.1, 12.2, 12.3
Ubuntu 10.04, 10.10, 11.04, 11.10, 12.04, 12.10
SuSE Linux Enterprise Desktop 10, 11
Debian 5.0, 6.0
Mint 13, 14
CPU Pentium IV 2.4GHz (Intel Core™2)
RAM 512 MB (1 GB)
Free HDD space 1 GB (2 GB)
Specifications
5. Appendix 112
4
Network environment
Network and wireless models only (see "Features by models" on page 7).
You need to set up the network protocols on the machine to use it as your network machine. The following table shows the network environments supported by the
machine.
Items Specifications
Network interface • Ethernet 10/100 Base-TX Wired Lan
• 802.11b/g/n Wireless LAN
Network operating system • Server 2003 /Server 2008/XP/Vista/7/Server 2008 R2
• Various Linux OS
• Mac OS X 10.5 ~10.9
Network protocols • TCP/IPv4
• DHCP, BOOTP
• DNS, WINS, Bonjour, SLP, UPnP
• Standard TCP/IP Printing (RAW), LPR, IPP, WSD
• SNMPv 1/2/3, HTTP, IPSec
• TCP/IPv6 (DHCP, DNS, RAW, LPR, SNMPv 1/2/3, HTTP, IPSec)
Wireless security • Authentication: Open System, Shared Key, WPA Personal, WPA2 Personal (PSK)
• Encryption: WEP64, WEP128, TKIP, AES
5. Appendix 113
Regulatory information
This machine is designed for a normal work environment and certified with
several regulatory statements.
5
Laser safety statement
The printer is certified in the U.S. to conform to the requirements of DHHS 21
CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is
certified as a Class I laser product conforming to the requirements of IEC 60825-
1 :2007.
Class I laser products are not considered to be hazardous. The laser system and
printer are designed so there is never any human access to laser radiation above
a Class I level during normal operation, user maintenance or prescribed service
condition.
Warning
Never operate or service the printer with the protective cover removed from
laser/scanner assembly. The reflected beam, although invisible, can damage
your eyes.
When using this product, these basic safety precautions should always be
followed to reduce risk of fire, electric shock, and injury to persons:
Regulatory information
5. Appendix 114
6
Ozone safety
7
Mercury Safety
8
Power saver
9
Recycling
This product’s ozone emission rate is under 0.1 ppm. Because
ozone is heavier than air, keep the product in a place with good
ventilation.
Contains Mercury, Dispose According to Local, State or Federal
Laws.(U.S.A. only)
This printer contains advanced energy conservation technology that
reduces power consumption when it is not in active use.
When the printer does not receive data for an extended period of
time, power consumption is automatically lowered.
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.
For more information on the ENERGY STAR program see http://
www.energystar.gov
For ENERGY STAR certified models, the ENRGY STAR label will be on
your machine. Check if your machine is ENERGY STAR certified.
Recycle or dispose of the packaging material for this product in an
environmentally responsible manner.
Regulatory information
5. Appendix 115
10
China only
Website : http://www.samsung.com/cn/support/location/
supportServiceLocation.do?page=SERVICE.LOCATION
11
Correct disposal of this product (Waste electrical &
electronic equipment)
(Applicable in countries with separate collection
systems)
襦愤縑趀爮闭
賉帞 縑趀绌裎 術賉縑聱ポM9śJマ
;SUHVV0:
;SUHVV0+:
蜷筨愤竖爮襔*%
襦愤縑趀爮闭
賉帞 縑趀绌裎 術賉縑聱ポM9śJマ
This marking on the product, accessories or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable)
should not be disposed of with other household waste at the end of
their working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate these
items from other s of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for
disposal.
Regulatory information
5. Appendix 116
(The United States of America only)
Dispose unwanted electronics through an approved recycler. To find the nearest
recycling location, go to our website:www.samsung.com/recyclingdirect Or call,
(877) 278 - 0799
12
State of California Proposition 65 Warning (US Only)
13
Taiwan only
14
Radio frequency emissions
FCC information to the user
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Regulatory information
5. Appendix 117
• Consult the dealer or experienced radio TV technician for help.
Change or modifications not expressly approved by the manufacturer
responsible for compliance could void the user's authority to operate the
equipment.
Canadian radio interference regulations
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the interference-causing
equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry and
Science Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques
applicables aux appareils numériques de Classe B prescrites dans la norme sur le
matériel brouilleur: “Appareils Numériques”, ICES-003 édictée par l’Industrie et
Sciences Canada.
15
United States of America
Federal Communications Commission (FCC)
Intentional emitter per FCC Part 15
Low power, Radio LAN devices (radio frequency (RF) wireless communication
devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in
your printer system. This section is only applicable if these devices are present.
Refer to the system label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for use in the
United States of America if an FCC ID number is on the system label.
The FCC has set a general guideline of 20 cm (8 inches) separation between the
device and the body, for use of a wireless device near the body (this does not
include extremities). This device should be used more than 20 cm (8 inches)
from the body when wireless devices are on. The power output of the wireless
device (or devices), which may be embedded in your printer, is well below the
RF exposure limits as set by the FCC.
This transmitter must not be collocated or operation in conjunction with any
other antenna or transmitter.
Operation of this device is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation of the device.
Regulatory information
5. Appendix 118
Wireless devices are not user serviceable. Do not modify them in any way.
Modification to a wireless device will void the authorization to use it.
Contact manufacturer for service.
FCC Statement for Wireless LAN use:
While installing and operating this transmitter and antenna combination
the radio frequency exposure limit of 1m W/cm2 may be exceeded at
distances close to the antenna installed. Therefore, the user must maintain
a minimum distance of 20cm from the antenna at all times. This device
cannot be colocated with another transmitter and transmitting antenna.
16
Russia/Kazakhstan/Belarus only
17
Germany only
18
Turkey only
19
Thai only
20
Canada only
This product meets the applicable Industry Canada technical specifications. / Le
present materiel est conforme aux specifications techniques applicables
d’Industrie Canada.
Regulatory information
5. Appendix 119
The Ringer Equivalence Number (REN) is an indication of the maximum number
of devices allowed to be connected to a telephone interface. The termination of
an interface may consist of any combination of devices subject only to the
requirement that the sum of the RENs of all the devices not exceed five. / L’indice
d’equivalence de la sonnerie (IES) sert a indiquer le nombre maximal de
terminaux qui peuvent etre raccordes a une interface telephonique. La
terminaison d’une interface peut consister en une combinaison quelconque de
dispositifs, a la seule condition que la somme d’indices d’equivalence de la
sonnerie de tous les dispositifs n’excede pas cinq.
21
Fax Branding
The Telephone Consumer Protection Act of 1991 makes it unlawful for any
person to use a computer or other electronic device to send any message via a
telephone facsimile machine unless such message clearly contains in a margin
at the top or bottom of each transmitted page or on the first page of the
transmission the following information:
1 the date and time of transmission
2 identification of either business, business entity or individual sending the
message; and
3 telephone number of either the sending machine, business, business entity
or individual.
The Telephone Company may make changes in its communications facilities,
equipment operations or procedures where such action is reasonably required
in the operation of its business and is not inconsistent with the rules and
regulations in FCC Part 68. If such changes can be reasonably expected to render
any customer terminal equipment incompatible with telephone company
communications facilities, or require modification or alteration of such terminal
equipment, or otherwise materially affect its use or performance, the customer
shall be given adequate notice in writing, to allow the customer an opportunity
to maintain uninterrupted service
22
Ringer Equivalence Number
The Ringer Equivalence Number and FCC Registration Number for this machine
may be found on the label located on the bottom or rear of the machine. In some
instances you may need to provide these numbers to the telephone company.
The Ringer Equivalence Number (REN) is a measure of the electrical load placed
on the telephone line, and is useful for determining whether you have
“overloaded” the line. Installing several s of equipment on the same telephone
line may result in problems making and receiving telephone calls, especially
ringing when your line is called. The sum of all Ringer Equivalence Numbers of
the equipment on your telephone line should be less than five in order to assure
proper service from the telephone company. In some cases, a sum of five may
not be usable on your line. If any of your telephone equipment is not operating
properly, you should immediately remove it from your telephone line, as it may
cause harm to the telephone network.
Regulatory information
5. Appendix 120
The equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On the rear of this equipment is a label that contains,
among other information, a product identifier in the format US:AAAEQ##TXXXX.
If requested, this number must be provided to the telephone company.
FCC Regulations state that changes or modifications to this equipment not
expressly approved by the manufacturer could void the user’s authority to
operate this equipment. In the event that terminal equipment causes harm
to the telephone network, the telephone company should notify the
customer that service may be stopped. However, where prior notice is
impractical, the company may temporarily cease service, providing that
they:
a promptly notify the customer.
b give the customer an opportunity to correct the equipment problem.
c inform the customer of the right to bring a complaint to the Federal
Communication Commission pursuant to procedures set out in FCC
Rules and Regulations Subpart E of Part 68.
You should also know that:
• Your machine is not designed to be connected to a digital PBX system.
• If you intend to use a computer modem or fax modem on the same phone
line as your machine, you may experience transmission and reception
problems with all the equipment. It is recommended that no other
equipment, except for a regular telephone, share the line with your
machine.
• If your area experiences a high incidence of lightning or power surges, we
recommend that you install surge protectors for both the power and the
telephone lines. Surge protectors can be purchased from your dealer or
telephone and electronic specialty stores.
• When programming emergency numbers and/or making test calls to
emergency numbers, use a non-emergency number to advise the
emergency service dispatcher of your intentions. The dispatcher will give
you further instructions on how to actually test the emergency number.
• This machine may not be used on coin service or party lines.
• This machine provides magnetic coupling to hearing aids.
You may safely connect this equipment to the telephone network by means of
a standard modular jack, USOC RJ-11C.
23
Replacing the Fitted Plug (for UK Only)
Important
The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug
and has a 13 amp fuse. When you change or examine the fuse, you must re-fit
the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost
the fuse cover, do not use the plug until you have another fuse cover.
Contact the people from you purchased the machine.
Regulatory information
5. Appendix 121
The 13 amp plug is the most widely used in the UK and should be suitable.
However, some buildings (mainly old ones) do not have normal 13 amp plug
sockets. You need to buy a suitable plug adaptor. Do not remove the moulded
plug.
If you cut off the moulded plug, get rid of it straight away.You cannot rewire
the plug and you may receive an electric shock if you plug it into a socket.
Important warning:
If the wires in the mains lead do not match the colors marked in your plug, do
the following:
You must connect the green and yellow wire to the pin marked by the letter “E”
or by the safety ‘Earth symbol’ or colored green and yellow or green.
You must connect the blue wire to the pin which is marked with the letter “N” or
colored black.
You must connect the brown wire to the pin which is marked with the letter “L”
or colored red.
You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.
24
Declaration of conformity (European countries)
Approvals and Certifications
January 1, 1995: Council Directive 2006/95/EC Approximation of the laws of
the member states related to low voltage equipment.
January 1, 1996: Council Directive 2004/108/EC, approximation of the laws of
the Member States related to electromagnetic compatibility.
You must earth this machine.
The wires in the mains lead have the following color code:
• Green and Yellow: Earth
• Blue: Neutral
• Brown: Live
Hereby, Samsung Electronics, declares that this [M207x series] is in
compliance with the essential requirements and other relevant
provisions of Low Voltage Directive (2006/95/EC), EMC Directive
(2004/108/EC).
Hereby, Samsung Electronics, declares that this [M207xW series/
M207xF series/M207xFW series] is in compliance with the essential
requirements and other relevant provisions of R&TTE Directive 1999/
5/EC.
The declaration of conformity may be consulted at
www.samsung.com, go to Support > Download center and enter
your printer (MFP) name to browse the EuDoC.
Regulatory information
5. Appendix 122
March 9, 1999: Council Directive 1999/5/EC on radio equipment and
telecommunications terminal equipment and the mutual recognition of their
conformity. A full declaration, defining the relevant Directives and referenced
standards can be obtained from your Samsung Electronics Co., Ltd.
representative.
EC Certification
Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal
Equipment Directive (FAX)
This Samsung product has been self-certified by Samsung for pan-European
single terminal connection to the analogue public switched telephone network
(PSTN) in accordance with Directive 1999/5/EC. The product has been designed
to work with the national PSTNs and compatible PBXs of the European
countries:
In the event of problems, you should contact the Euro QA Lab of Samsung
Electronics Co., Ltd. in the first instance.
The product has been tested against TBR21. To assist in the use and application
of terminal equipment which complies with this standard, the European
Telecommunication Standards Institute (ETSI) has issued an advisory document
(EG 201 121) which contains notes and additional requirements to ensure
network compatibility of TBR21 terminals. The product has been designed
against, and is fully compliant with, all of the relevant advisory notes contained
in this document.
European radio approval information (for products
fitted with EU-approved radio devices)
Low power, Radio LAN type devices (radio frequency (RF) wireless
communication devices), operating in the 2.4 GHz/5 GHz band, may be present
(embedded) in your printer system which is intended for home or office use. This
section is only applicable if these devices are present. Refer to the system label
to verify the presence of wireless devices.
The power output of the wireless device or devices that may be embedded in
you printer is well below the RF exposure limits as set by the European
Commission through the R&TTE directive.
European states qualified under wireless approvals:
EU countries
European states with restrictions on use:
EU
In France, the frequency range is restricted to 2454-2483.5 MHz for devices
above 10 mW transmitting power such as wireless
EEA/EFTA countries
Wireless devices that may be in your system are only qualified for
use in the European Union or associated areas if a CE mark with a
Notified Body Registration Number and the Alert Symbol is on the
system label.
Regulatory information
5. Appendix 123
No limitations at this time
25
Israel only
26
Regulatory compliance statements
Wireless guidance
Low power, Radio LAN devices (radio frequency (RF) wireless communication
devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in
your printer system. The following section is a general overview of
considerations while operating a wireless device.
Additional limitations, cautions, and concerns for specific countries are listed in
the specific country sections (or country group sections). The wireless devices in
your system are only qualified for use in the countries identified by the Radio
Approval Marks on the system rating label. If the country you will be using the
wireless device in, is not listed, contact your local Radio Approval agency for
requirements. Wireless devices are closely regulated and use may not be
allowed.
The power output of the wireless device or devices that may be embedded in
your printer is well below the RF exposure limits as known at this time. Because
the wireless devices (which may be embedded into your printer) emit less
energy than is allowed in radio frequency safety standards and
recommendations, manufacturer believes these devices are safe for use.
Regardless of the power levels, care should be taken to minimize human contact
during normal operation.
As a general guideline, a separation of 20 cm (8 inches) between the wireless
device and the body, for use of a wireless device near the body (this does not
include extremities) is typical. This device should be used more than 20 cm (8
inches) from the body when wireless devices are on and transmitting.
This transmitter must not be collocated or operation in conjunction with any
other antenna or transmitter.
Some circumstances require restrictions on wireless devices. Examples of
common restrictions are listed below:
Radio frequency wireless communication can interfere with
equipment on commercial aircraft. Current aviation regulations
require wireless devices to be turned off while traveling in an airplane.
IEEE 802.11 (also known as wireless Ethernet) and Bluetooth
communication devices are examples of devices that provide wireless
communication.
Regulatory information
5. Appendix 124
In environments where the risk of interference to other devices or
services is harmful or perceived as harmful, the option to use a wireless
device may be restricted or eliminated. Airports, Hospitals, and
Oxygen or flammable gas laden atmospheres are limited examples
where use of wireless devices may be restricted or eliminated. When in
environments where you are uncertain of the sanction to use wireless
devices, ask the applicable authority for authorization prior to use or
turning on the wireless device.
Every country has different restrictions on the use of wireless devices.
Since your system is equipped with a wireless device, when traveling
between countries with your system, check with the local Radio
Approval authorities prior to any move or trip for any restrictions on
the use of a wireless device in the destination country.
If your system came equipped with an internal embedded wireless
device, do not operate the wireless device unless all covers and shields
are in place and the system is fully assembled.
Wireless devices are not user serviceable. Do not modify them in any
way. Modification to a wireless device will void the authorization to
use it. Contact manufacturer for service.
Only use drivers approved for the country in which the device will be
used. See the manufacturer System Restoration Kit, or contact
manufacturer Technical Support for additional information.
Regulatory information
5. Appendix 125
27
China only
5. Appendix 126
Copyright
© 2013 Samsung Electronics Co., Ltd. All rights reserved.
This user’s guide is provided for information purposes only. All information included herein is subject to change without notice.
Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide.
• Samsung and the Samsung logo are trademarks of Samsung Electronics Co., Ltd.
• Microsoft, Windows, Windows Vista, Windows 7, and Windows Server 2008 R2 are either registered trademarks or trademarks of Microsoft Corporation.
• Microsoft, Internet Explorer, Excel, Word, PowerPoint, and Outlook are either registered trademarks or trademarks of Microsoft Corporation in the United States
and other countries.
• Google, Picasa, Google Docs, Android and Gmail are either registered trademarks or trademarks of Google Inc.
• Google Cloud Print is a trademark of Google Inc.
• iPad, iPhone, iPod touch, Mac and Mac OS are trademarks of Apple Inc., registered in the U.S and other countries.
AirPrint and the AirPrint logo are trademarks of Apple Inc.
• LaserWriter is a trademark of Apple Computer, Inc.
• All other brand or product names are trademarks of their respective companies or organizations.
Refer to the 'LICENSE.txt' file in the provided CD-ROM for the open source license information.
REV. 4.00
ADVANCED
User’s Guide
ADVANCED
User’s Guide
This guide provides information about installation, advanced configuration,
operation and troubleshooting on various OS environments.
Some features may not be available depending on models or countries.
BASIC
This guide provides information concerning installation, basic operation and troubleshooting
on windows.
128
ADVANCED
1. Software Installation
Installation for Mac 131
Reinstallation for Mac 132
Installation for Linux 133
Reinstallation for Linux 134
2. Using a Network-Connected
Machine
Useful network programs 136
Wired network setup 137
Installing driver over the network 140
IPv6 configuration 145
Wireless network setup 148
Samsung Mobile Print 173
Using the NFC feature 174
3. Useful Setting Menus
Before you begin reading a chapter 179
Copy menu 180
Fax menu 182
System setup 185
Network setup 191
4. Special Features
Altitude adjustment 194
Storing email address 195
Entering various characters 197
Setting up the fax address book 198
Registering authorized users 202
Printing features 203
Scan features 216
Fax features 225
Using shared folder features 234
Using memory/hard drive features 235
129
ADVANCED
5. Useful Management Tools
Easy Capture Manager 237
Samsung AnyWeb Print 238
Easy Eco Driver 239
Using SyncThru™ Web Service 240
Using Samsung Easy Document Creator 243
Using Samsung Easy Printer Manager 244
Using Samsung Printer Status 247
6. Troubleshooting
Paper feeding problems 250
Power and cable connecting problems 251
Printing problems 252
Printing quality problems 256
Copying problems 264
Scanning problems 265
Faxing problems 267
Operating system problems 269
1. Software Installation
This chapter provides instructions for installing essential and helpful software for use in an environment where the
machine is connected via a cable. A locally connected machine is a machine directly attached to your computer using
the cable. If your machine is attached to a network, skip the following steps below and go on to installing a network
connected machine’s driver (see "Installing driver over the network" on page 140).
• Installation for Mac 131
• Reinstallation for Mac 132
• Installation for Linux 133
• Reinstallation for Linux 134
• If you are a Windows OS user, refer to the Basic Guide for installing the machine’s driver (see
"Installing the driver locally" on page 28).
• Only use a USB cable no longer then 3 meter (118 inches).
1. Software Installation 131
Installation for Mac
1 Make sure that the machine is connected to your computer and
powered on.
2 Insert the supplied software CD into your CD-ROM drive.
3 Double-click the CD-ROM icon that appears on your Mac desktop.
• For Mac OS X 10.8, double-click the CD-ROM that appears on Finder.
4 Double-click the MAC_Installer folder > Installer OS X icon.
5 Click Continue.
6 Read the license agreement and click Continue.
7 Click Agree to agree to the license agreement.
8 Click Install. All components necessary for machine operations will be
installed.
If you click Customize, you can choose individual components to install.
9 Enter the password and click OK.
10 Select USB Connected Printer on the Printer Connection Type and
click Continue.
11 Click Add Printer button to select your printer and add it to your printer
list.
If your machine supports fax, click Add Fax button to select your fax and
add it to your fax list
12 After the installation is finished, click Close.
1. Software Installation 132
Reinstallation for Mac
If the printer driver does not work properly, uninstall the driver and reinstall it.
1 Open the Applications folder > Samsung > Printer Software
Uninstaller.
2 To uninstall printer software, click Continue.
3 Check the program you want to delete and click Uninstall.
4 Enter the password and click OK.
5 After the uninstallation is finished, click Close.
If a machine has already been added, delete it from the Print Setup Utility
or Print & Fax.
1. Software Installation 133
Installation for Linux
You need to download Linux software packages from the Samsung website to
install the printer software (http://www.samsung.com > find your product >
Support or Downloads).
1
Installing the Unified Linux Driver
You must log in as a super user (root) to install the machine software. If you
are not a super user, ask your system administrator.
1 Make sure that the machine is connected to your system and powered
on.
2 Copy Unified Linux Driver package to your system.
3 Open Terminal program and go to the folder that you copied the
package to.
4 Extract the package.
5 Move to uld folder.
6 Execute ” ./install.sh“ command (If you are not logged in as root,
execute the command with “sudo” as “sudo ./install.sh”).
7 Proceed with installation.
8 When installation finished, launch Printing utility (Go to System >
Administration > Printing or execute “system-config-printer“
command in Terminal program).
9 Click Add button.
10 Select your printer.
11 Click Forward button and add it to your system.
1. Software Installation 134
Reinstallation for Linux
If the printer driver does not work properly, uninstall the driver and reinstall it.
1 Open Terminal program.
2 Move to uld folder extracted from Unified Linux Driver package.
3 Execute ” ./install.sh“ command (If you are not logged in as root,
execute the command with “sudo” as “sudo ./install.sh”).
4 Proceed with uninstallation.
2. Using a NetworkConnected
Machine
This chapter gives you step-by-step instructions for setting up a network connected machine and software.
• Useful network programs 136
• Wired network setup 137
• Installing driver over the network 140
• IPv6 configuration 145
• Wireless network setup 148
• Samsung Mobile Print 173
• Using the NFC feature 174
Supported optional devices and features may differ according to your model (see "Features by
models" on page 7).
2. Using a Network-Connected Machine 136
Useful network programs
There are several programs available to setup the network settings easily in a
network environment. For the network administrator especially, managing
several machines on the network is possible.
• Before using the programs below, set the IP address first.
• Some features and optional goods may not be available depending on
model or country (see "Features by models" on page 7).
1
SyncThru™ Web Service
The web server embedded on your network machine allows you to do the
following tasks (see "Using SyncThru™ Web Service" on page 240).
• Check the supplies information and status.
• Customize machine settings.
• Configure the network parameters necessary for the machine to connect to
various network environments.
2
SyncThru™ Web Admin Service
Web-based machine management solution for network administrators.
SyncThru™ Web Admin Service provides you with an efficient way of managing
network devices and lets you remotely monitor and troubleshoot network
machines from any site with corporate Internet access.
• Download this program from http://solution.samsungprinter.com.
3
SetIP wired network setup
This utility program allows you to select a network interface and manually
configure the IP addresses for use with the TCP/IP protocol.
• See "IPv4 configuration using SetIP (Windows)" on page 137.
• See "IPv4 configuration using SetIP (Mac)" on page 138.
• The machine that does not support the network port, it will not be able
to use this feature (see "Rear view" on page 22).
• TCP/IPv6 is not supported by this program.
2. Using a Network-Connected Machine 137
Wired network setup
4
Printing a network configuration report
You can print Network Configuration Report from the machine’s control panel
that will show the current machine’s network settings. This will help you to set
up a network.
• The machine has the display screen: Press the (Menu) button on the
control panel and select Network > Network Conf. (Network
Configuration).
• The machine has the touch screen: Press Setup from the Main screen >
Network > Next > Network Configuration.
• The machine does not have the display screen: Press the (Cancel or
Stop/Clear) button for more than 4~5 seconds on the control panel.
Using this Network Configuration Report, you can find your machine’s MAC
address and IP address.
For example:
• MAC Address: 00:15:99:41:A2:78
• IP Address: 169.254.192.192
5
Setting IP address
• The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 22).
• TCP/IPv6 is not supported by this program.
First, you have to set up an IP address for network printing and managements.
In most cases a new IP address will be automatically assigned by a DHCP
(Dynamic Host Configuration Protocol) server located on the network.
IPv4 configuration using SetIP (Windows)
Before using the SetIP program, disable the computer firewall from Control
Panel > Security Center > Windows Firewall.
The following instructions may differ for your model.
1 Download the software from the Samsung website then unpack and
install it: (http://www.samsung.com > find your product > Support or
Downloads).
2 Follow the instructions in the installation window.
3 Connect your machine to the network with a network cable.
Wired network setup
2. Using a Network-Connected Machine 138
4 Turn on the machine.
5 From the Windows Start menu, select All Programs > Samsung
Printers > SetIP > SetIP.
6 Click the icon (third from left) in the SetIP window to open the TCP/IP
configuration window.
7 Enter the machine’s new information into the configuration window. In
a corporate intranet, you may need to have this information assigned by
a network manager before proceeding.
Find the machine’s MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 137) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
8 Click Apply, and then click OK. The machine will automatically print the
Network Configuration Report. Confirm that all the settings are
correct.
IPv4 configuration using SetIP (Mac)
Before using the SetIP program, disable the computer firewall from System
Preferences > Security > Firewall.
The following instructions may vary from your model.
1 Connect your machine to the network with a network cable.
2 Insert the supplied software CD into your CD-ROM drive.
3 Double-click the CD-ROM icon that appears on your Mac desktop.
• For Mac OS X 10.8, Double-click the CD-ROM that appears on Finder.
4 Double-click the MAC_Installer folder > Installer OS X icon.
5 Click Continue.
6 Read the license agreement and click Continue.
7 Click Agree to agree to the license agreement.
Wired network setup
2. Using a Network-Connected Machine 139
8 Click Install. All components necessary for machine operations will be
installed.
If you click Customize, you can choose individual components to install.
9 Enter the password and click OK.
10 When the message that warns that all applications will close on your
computer appears, click Continue.
11 Select Network Connected Printer(Wired or Wireless) on the Printer
Connection Type and click Set IP Address button.
12 Click the icon (third from left) in the SetIP window to open the TCP/IP
configuration window.
13 Enter the machine’s new information into the configuration window. In
a corporate intranet, you may need to have this information assigned by
a network manager before proceeding.
Find the machine’s MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 137) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
14 Click Apply, and then click OK. The machine will automatically print the
Network Configuration Report. Confirm that all the settings are
correct.
2. Using a Network-Connected Machine 140
Installing driver over the network
• Some features and optional goods may not be available depending on
model or country (see "Features by models" on page 7).
• The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 22).
6
Windows
1 Make sure that the machine is connected to the network and powered
on. Also, your machine’s IP address should have been set (see "Setting IP
address" on page 137).
2 Insert the supplied software CD into your CD-ROM drive.
3 Review and accept the installation agreements in the installation
window. Then, click Next.
4 Select Network connection on the Printer Connection Type screen.
Then, click Next.
5 Follow the instructions in the installation window.
Silent installation Mode
Silent installation mode is an installation method that does not require any user
intervention. Once you start the installation, the machine driver and software
are automatically installed on you computer. You can start the silent installation
by typing /s or /S in the command window.
Command-line Parameters
Following table shows commands that can be used in the command window.
Following command-line are effective and operated when command is
used with /s or /S. But /h, /H or /? are exceptional commands that can be
operated solely.
Command- line Definition Description
/s or/S Starts silent installation. Installs machine drivers
without prompting any UIs
or user intervention.
Installing driver over the network
2. Using a Network-Connected Machine 141
/p”