Samsung lcd_business_q2.pdf - Mode d'emploi - Manuel de l'utilisateur - Manuels- Samsung

SAMSUNG sur FNAC.COM  - Liste des manuels utilisateur Samsung

- Revenir à l'accueil

 

 

 

http://www.samsung.com/us/business/semiconductor/news/downloads/lcd_business_q2.pdf

 

Manuels Utilisateurs Samsung :

Samsung-ME40A-TP40-Japon-Manuels

Samsung-UA40ES5500-UA40ES5500R-Chine-Manuels

Samsung-700TSn-2-SSD-Japon-Manuels

Samsung-ME46A-Japon-Manuels

Samsung-NC190-Japon-Manuels

Samsung-320TSN-3D-SSD-Japon-Manuels

Samsung-GT-P5110-Japon-Manuels

Samsung-E1720NR-Japon-Manuels

Samsung-Galaxy-Tab-2-10.1-GT-P5100-Manuels

Samsung-Galaxy-Tab-2-7.0-GT-P3100-Manuels

Samsung-S22B350B-Manuels

Samsung-51-PS51E490WXZF-serie-4-3D-HD-TV-PDP-TV-PS51E490B1W-Manuels

Samsung-Galaxy-Note-II-GT-N7100-Manuels

Samsung-GT-I9300-Manuels

SAMSUNG/SAMSUNG-DV90-Manuels

Samsung-GT-N8000-Manuels

Samsung-AQV12KBBN-Pologne-Manuels

Samsung-ML-2165W-Roumanie-Manuels

Samsung-Notebook-Serie-7-Chronos-700Z5C-S01-NP700Z5C-S01DE-Manuels

Samsung-Player-One-noir-Open-market-GT-S5230-Manuels

Samsung-LE32E420E2W-Manuels

Samsung-910MP-Manuels

Samsung-Galaxy-S-SCL-noir-Open-market-GT-I9003-M4-Manuels

Samsung-Samsung-Galaxy-Pro-gris-Open-market-GT-B7510-Manuels

Samsung-Galaxy-Gio-noir-SFR-GT-S5660-Manuels

Samsung-Galaxy-Teos-noir-Bouygues-GT-I5800-Manuels

Samsung-Galaxy-Spica-noir-Bouygues-GT-I5700-Manuels

Samsung-Omnia-Pro-B7610-noir-Open-market-GT-B7610-Manuels

Samsung-S5610-GT-S5610-Manuels

Samsung-LE32C650-LE32C650L1W-Manuels

Samsung-LE26D450G1W-Manuels

Samsung-N145Plus-NP-N145P-Manuels

Samsung-N150-NP-N150-Manuels

Samsung-NP20-NP20FK02BG-SEF-Manuels

Samsung-GT-S5570_UM_Open_Gingerbread_Fre_Rev.1.0_110726_Screen.pdf-Manuels

Samsung-GT-I9070P_UM_Open_Gingerbread_Fre_Rev.1.0_120710_Screen.pdf-Manuels

Samsung-GT-I9300_UM_Open_Icecream_Fre_Rev.1.2_120725_Screen.pdf-Manuels

Samsung-LE32D400E1W-Manuels

Samsung-Gainable-Slim-MH026FEEA-Manuels

Samsung-CW21Z573N-Manuels

Samsung-40-UE40D5700WXZF-serie-5-SMART-TV-FULL-HD-LED-TV-UE40D5700RS-Manuels

Samsung-UE46C8700-UE46C8790XS-Manuels

Samsung-UE32D5700RS-Manuels

Samsung-UE46ES6300-ZF-Slim-LED-46-SMART-TV-3D-UE46ES6300S-Manuels

Samsung-2012_Skype_Eng-0316-1-Manuels

Samsung-NS140SDXEA-Manuels

Samsung-MH050FXEA2B-Manuels

Samsung-UE75ES9000S-Slim-LED-75-SMART-Interaction-3D-Manuels

Samsung-RR92HAWW-Manuels

Samsung-GT-P6200-Manuels

Samsung-Refrigerateur-1porteA-350-L-Blanc-RR82FHSW-Manuels

Samsung-UE26EH4000-ZF-LED-26-HD-TV-UE26EH4000W-Manuels

Samsung-E-MANUAL-X9DVBEU4E-ENG-Manuel

Samsung-GT-S5360_UM_Open_Gingerbread_Fre_Rev.1.0_111130_Screen-Manuel

Samsung-Galaxy-Tab-10-1-GT-P7500-M16-Manuel

Samsung-Galaxy-Tab-10-1-GT-P7500-M16-Manuels

Samsung-GT-S5360-Manuels

Samsung-Lecteur-Multimedia-Galaxy-S-WiFi-4-0-Blanc-8Go-YP-G1CW-Manuels

Samsung-Galaxy-551-noir-Open-marketGT-I5510-Manuels

Samsung-Galaxy-Note-10-1-GT-N8000-Manuels

Samsung-GALAXY-S-II-LTE-SC-03D-JP-Manuels

Samsung-GALAXY-Note-SC-05D-JP-Manuels

Samsung-NP-R530-NP-R530-JA02FR-Manuels

Samsung-UE40C6000-UE40C6000RW-Manuels

Samsung-Congelateur-1porteA-277-L-Blanc-RZ80FHSW-Manuels

Samsung-GT-B5310-Manuels

Nexus-S-noir-Open-market-GT-I9023-GT-B5310-Manuels

Samsung-32-LE32D450WXZF-serie-4-HD-TV-LCD-TV-Manuels

Samsung-46-UE46D5700WXZF-serie-5-SMART-TV-FULL-HD-LED-TV-UE46D5700RS-Manuels

Samsung-UE55ES6560S-Manuels

Samsung-UE46ES8000-ZF-Slim-LED-46-SMART-INTERACTION-3D-UE46ES8000S-Manuels

Samsung-UE55ES6300-ZF-Slim-LED-55-SMART-TV-3D-UE55ES6300S-Manuels

Samsung-AQV18UGAX-Manuels

Samsung-UE50EH5300W-Manuels

Samsung-LE46A676-LE46A676A1M-Manuels

Samsung-UE46C7700-UE46C7700WS-Manuels

Samsung-CW21Z503N-Manuels

Samsung-AQ18UGFN-Manuels

Samsung-Refrigerateur-DP-A275-L-Blanc-RT34GBSW-Manuels

Samsung-UE46ES6100W-Manuels

Samsung-RR92HASX-Manuels

Samsung-LE40S71B-Manuels

Samsung-UE32ES6710-ZF-Slim-LED-32-SMART-TV-3DUE32ES6710S-Manuels

Samsung-Galaxy-Ace-noir-Open-market-GT-S5830-Manuels

Samsung-GALAXY-Tab-GT-P1000-GT-P1000-M16-Manuels

Samsung-Omnia-Pro-B7330-noir-Open-market-GT-B7330-Manuels

Samsung-Omnia-Lite-noir-Orange-GT-B7300-Manuels

Samsung-Galaxy-S2-GT-I9100-Manuels

Samsung-Nexus-S-noir-Open-market-GT-I9023-Manuels

Samsung-Omnia-II-noir-SFRGT-I8000-Manuels

Samsung-Omnia-II-noir-SFR-GT-I8000-Manuels

Samsung-Omnia-7-noir-Open-market-GT-I8700-Manuels

Samsung-Galaxy-noir-Bouygues-GT-I7500-Manuels

Samsung-Galaxy-mini-gris-Open-market-GT-S5570-Manuels

Samsung-XE700T1A-HF1FR-Manuels

17,3" Série 3 300E7A - NP300E7A-S01FR - Manuels

40", UE40D6500WXZF, série 6, SMART TV, 3D, FULL HD, LED TV - UE40D6500VS - Manuels

CLX-3185FW Manuels

Galaxy Ace GT-S5830

Galaxy S II GT-I9100

Galaxy Tab 8.9 GT-P7310/M16

Galaxy Tab 10.1 GT-P7500/M16

Galaxy YGT-S5360

LE32C350 LE32C350D1W

LE40C630 LE40C630K1W

MM-C330D

MM-D330D

Micro-chaîne, MM-D330DWXZF, série 3 - MM-D330 - Manuels

N145Plus - NP-N145P - Manuels

N150 - NP-N150 - Manuels

RSH5UEPN

SGH-F490

Samsung Galaxy Ace noir - Open market - GT-S5830 - Manuels

Samsung Galaxy S II noir - Open market - Manuels

Samsung Galaxy S III - GT-I9300 - Manuels

Samsung Galaxy S noir - Open market - GT-I9000 - Manuels

Samsung Galaxy NoteGT-N7000

Samsung Galaxy SGT-I9000

Série 3 300E7A - NP300E7A-S03FR - Manuels

T23A550 T23A550

UE40D6500ZF UE40D6500VS

UE55ES8000/ZF, Slim LED 55", SMART INTERACTION, 3D - UE55ES8000S - Manuels

Wave 575 GT-S5750E

Wave II GT-S8530

16/4ppm Imprimante laser couleur CLP-310 Manuels

16/4ppm Multifonction lasercouleur CLX-3170FN Manuels

16/4ppm Multifonction lasercouleur CLX-3185FW Manuels Samsung

16/4ppm Multifonction laser couleur CLX-3185 Manuels Samsung

samsung-Wave-II-noir-Open-market-GT-S8530-Manuels

Samsung-Wave-noir-Open-market-GT-S8500-Manuels

Samsung-Wave-M-noir-Open-market-GT-S7250-Manuels

Samsung-Wave-578-noir-Open-market-GT-S5780-Manuels

Samsung-Wave-533-noir-Open-market-GT-S5330-Manuels

Samsung-Wave-3-noir-Open-market-GT-S8600-Manuels

Samsung-Player-HD-noir-Open-market-GT-I8910-Manuels

Samsung-Player-Duo-noir-Open-market-SGH-D980-Manuels

Samsung-Player-Addict-noir-Open-market-SGH-I900-Manuels

Samsung-Omnia-W-noir-Open-market-GT-I8350-Manuels

PRODUITS SAMSUNG :
Belkin Chargeur Secteur pour Samsung Galaxy S
Belkin Coque pour Samsung Galaxy S3 - Noire Translucide
Belkin Etui cuir Verve Folio pour Samsung Galaxy S II
Belkin Etui Pouch pour Samsung Galaxy S3 - Noir
Belkin Kit de Charge Secteur + Automobile pour Samsung Galaxy S
Belkin Lot de 3 protections d'écran pour Samsung Galaxy S3
Belkin Lot de 3 protections d'écran pour Samsung Galaxy S3 - Anti-reflets
Belkin Lot de 3 protections d'écran Screen Guard pour Samsung Galaxy SII - Transparentes
Belkin Micro-Chargeur allume-cigares pour Samsung Galaxy S
Belkin Protection d'écran Screen Guard pour Samsung Galaxy SII - Confidentialité 360°
Câble Omenex Plug & Phone pour Samsung
Câble Omenex Plug & Phone pour Samsung
Coque semi-rigide glossy noire pour Samsung Galaxy S II
Déclencheur sans Fil Hahnel combi TF pour Canon/Pentax/Samsung
Enceintes iLuv iSM524 noir pour Samsung Galaxy Tab
Etui-Brassard Belkin DualFit pour Samsung Galaxy S II
Etui Samsung CC9S70B noir
Fnac chargeur secteur POWY pour Samsung SGH-D800
G-Mobility Pack confort pour Samsung Galaxy SII i9100
Imprimante Samsung CLX-3185FN - Ethernet
Kensington Etui pliant pour Samsung Galaxy Tab
Le Tanneur Etui cuir Pouch pour Samsung Galaxy S11 I9100 - Noir
Lunettes 3D actives Samsung SSG-4100GB
Modelabs 2 protections écran pour Samsung Galaxy ACE S5830
Modelabs Lot de 2 protections d'écran One Touch pour Samsung Galaxy Y S5360 - Transparentes
Modelabs Lot de 2 protections d'écran pour Samsung Galaxy Note - Transparentes
Muvit Adaptateur Jack 3,5 mm pour Samsung (ancienne connectique)
Muvit Coque à rabat Agenda pour Samsung Galaxy Note - Noire
Muvit Coque Doodle Coeur pour Samsung i9000 Galaxy S
Muvit Coque Doodle Extraterrestres pour Samsung i9000 Galaxy S
Muvit Coque Doodle Rose pour Samsung i9000 Galaxy S
Muvit Coque silicone pour Samsung Galaxy Ace
Muvit Coque silicone pour Samsung Galaxy - Noire
Muvit Etui Clapet pour Samsung I9100 - Noir
Muvit Etui Slim Clapet pour Samsung Galaxy Note
Muvit Housse Minigel pour Samsung Galaxy - Noire
Muvit Lot de 2 protections d'écran pour Samsung nexus S - 1 Miroir/1 Secret
Muvit Lot de 2 protections d'écran pour Samsung S5830
Muvit Pack Accessoires pour Samsung S5830
Muvit Sticker Carbone pour Samsung I9100
Muvit Sticker Drapeau pour Samsung I9100 - I Love Ibiza
Muvit Sticker Drapeau pour Samsung I9100 - I Love London
Muvit Sticker Drapeau pour Samsung I9100 - I Love New-York
Muvit Sticker Drapeau pour Samsung I9100 - I Love Paris
Muvit Sticker Drapeau pour Samsung I9100 - I Love Tokyo
Muvit Sticker Drapeau pour Samsung I9100 - United Kingdom
Muvit Sticker Drapeau pour Samsung I9100 - USA
QDOS Coque Cubic pour Samsung Galaxy II I9100
QDOS Coque Steel 4 pour Samsung Galaxy S II
Samsung 305U1A 11,6" LED
Samsung 305U1A 11,6" LED + Office Famille et Etudiant 2010 1 poste
Samsung B1930HD 18.5" LCD TNT HD
Samsung B5722 Double SIM
Samsung Bac papier supplémentaire ML-S3710A - 520 feuilles
Samsung Batterie ED-BP1310
Samsung batterie IA-BH130LB
Samsung batterie IA-BP420E
Samsung batterie IA-BP85ST
Samsung batterie SLB-10A
Samsung batterie SSB-690 ELS
Samsung BD-E5300
Samsung BD-E5500 3D
Samsung BD-E6100 3D
Samsung BD-E8300 3D
Samsung BD-ES5000
Samsung BD-ES6000 3D
Samsung C3050 Stratus
Samsung Câble Adaptateur HDTV pour Galaxy Tab 8.9" / 10.1"
Samsung Câble data pour téléphones mobiles Samsung
Samsung caméra Skype CY-STC1100
Samsung CB20A12
Samsung Ch@t335 - GT-S3350 - Noir
Samsung Chargeur allume-cigares micro-USB
Samsung chargeur de voyage pour SGH-P260 et SGH-G600 - Modèle Noir
Samsung Chargeur secteur de voyage micro-USB
Samsung CLP-325 + Toner Samsung CLT-K4072S Noir
Samsung CLP-325 + Toner Samsung CLT-K4072S Noir
Samsung CLP-620ND - Imprimante Ethernet
Samsung CLP-C300A
Samsung CLP-K300A
Samsung CLP-M300A
Samsung CLP-Y300A
Samsung CLX-3185FW WiFi
Samsung CLX-3185FW WiFi + Toner Samsung CLT-K4072S Noir + MCL Samar câble imprimante USB 2.0
Samsung CLX-3185N Ethernet
Samsung CLX-3185W - Imprimante Multifonctions WiFi & Ethernet
Samsung CLX-6220FX - Imprimante Multifonctions Ethernet
Samsung Coque pour Galaxy S3 - Blanche
Samsung Coque pour Galaxy S3 - Noire
Samsung CY-SMN1000D meuble TV
Samsung Disque Dur interne SSD 128 Go - 830 Series
Samsung Disque Dur interne SSD 128 Go MZ-7PC128N 830 Series
Samsung Disque Dur interne SSD 256 Go MZ-7PC256D 830 Series
Samsung Disque Dur interne SSD 256 Go MZ-7PC256N 830 Series
Samsung Disque Dur interne SSD 512 Go - 830 Series
Samsung Disque Dur interne SSD 64 Go - 830 Series
Samsung Disque Dur interne SSD 64 Go MZ-7PC064D 830 Series
Samsung dongle Wi-Fi WIS12ABGNX
Samsung DP7000A3B 23" LED Tactile USB 3.0 + Samsung ML-2165 - Imprimante Monochrome
Samsung DP7000A3B 23" LED Tactile USB 3.0 + Sennheiser RS170
Samsung DP7000A3B-A01FR 23" LED Tactile USB 3.0
Samsung DP700A3B-S02FR 23" LED Tactile
Samsung Duo de 2 coques pour Samsung Galaxy II I9100 - 1 Noire + 1 Camel
Samsung Duo de 2 coques pour Samsung Galaxy II I9100 - 1 Noire matelassée + 1 Rose
Samsung DV300F Argent/Rouge - WiFi
Samsung DV300F Argent/Rouge - WiFi + Etui
Samsung DV300F Noir - WiFi
Samsung DV300F Noir - WiFi + Etui
Samsung E1150 - Silver
Samsung ES90 Noir
Samsung Etui coque pour Galaxy Note - Noir
Samsung Etui coque pour Samsung Galaxy Y S5360 - Noir
Samsung Etui cuir pour Galaxy S II - Noir
Samsung Etui rabat pour Samsung Galaxy S3 - Noir
Samsung Eui cuir pour i9000 Galaxy S
Samsung EX1
Samsung Flash SEF15A
Samsung Flash SEF20A
Samsung Galaxy Ace s5830 (sous Android)
Samsung Galaxy Mini (sous Android)
Samsung Galaxy Note
Samsung Galaxy Note - Blanc
Samsung Galaxy Note - Dark Blue
Samsung Galaxy S2 (I9100G) - Blanc
Samsung Galaxy S2 (I9100G) - Noir
Samsung Galaxy S3 (I9300) - Blanc Marbre
Samsung Galaxy S3 (I9300) - Bleu Galet
Samsung Galaxy S WiFi 4,2" 16 Go
Samsung Galaxy Tab 10,1" TFT 16 Go Blanc Wifi
Samsung Galaxy Tab 10,1" TFT 16 Go Blanc Wifi + HP Housse Mini Sleeve 10,2" pour Netbook et Tablette - Ocean Drive
Samsung Galaxy Tab 10,1" TFT 16 Go Noir Wifi
Samsung Galaxy Tab 10,1" TFT Blanc + Western Digital My Book Live 1 To Ethernet
Samsung Galaxy Tab 10,1" TFT Noir + Western Digital My Book Live 1 To Ethernet
Samsung Galaxy Tab 2 10,1" 16 Go - Argent
Samsung Galaxy Tab 2 10,1" 16 Go - Blanc
Samsung Galaxy Tab 2 7.0" LED 8 Go
Samsung Galaxy Tab 8,9" TFT Blanc 32 Go Wifi
Samsung Galaxy Y Pro B5510 (sous Android)
Samsung Galaxy Y Young s5360 (sous Android)
Samsung Graveur DVD Externe Wifi - SE-208BW - Noir
Samsung Graveur Externe BluRay SE-506AB
Samsung HMX-F80 Noir
Samsung HMX-Q20 Noir
Samsung HMX-QF20 Noir
Samsung HMX-W350 Noir (tout terrain) + Kit Accessoires Sport + micro SDHC 8 Go
Samsung HMX-W350 Rouge (tout terrain) + Kit Accessoires Sport + micro SDHC 8 Go
Samsung Housse Folio pour Galaxy Tab 10,1"
Samsung Housse Folio pour Galaxy Tab 8,9"
Samsung HT-D330
Samsung HT-D350
Samsung HT-D4500
Samsung HT-D5000 3D
Samsung HT-E4200 3D
Samsung HT-E4500 3D
Samsung HT-E5200 3D
Samsung HT-E5530 3D
Samsung HT-ES4200 3D
Samsung HT-ES6200 3D
Samsung HT-ES8200 3D
Samsung HW-E350
Samsung HW-E450
Samsung I9103 Galaxy R (sous Android)
Samsung Kit de connexion USB & SD pour Galaxy Tab 10.1"
Samsung Kit de vidéosurveillance tout-en-un SDE-3003P/EX
Samsung Kit de vidéosurveillance tout-en-un SME-4220
Samsung kit HDMI
Samsung kit papier 10 x 15 cm
Samsung kit piéton filaire stéréo Jack 3,5 mm
Samsung LE32E420
Samsung LE40D503
Samsung ML-1630/SCX4500
Samsung ML-2010D3
Samsung ML-2165 - Imprimante Monochrome
Samsung ML-2165W - Imprimante WiFi
Samsung ML-2545 - Imprimante Monochrome
Samsung ML-2955DW - Imprimante Ethernet & WiFi
Samsung ML-2955ND - Imprimante Ethernet
Samsung ML-3310D - Imprimante Monochrome
Samsung ML-3710DW - Imprimante Ethernet & WiFi
Samsung MLT-D1052S
Samsung MLT-D1082S
Samsung MLT-D1092S
Samsung MM-D430D
Samsung MM-E320
Samsung MV800 Noir
Samsung MV800 Noir + Etui Zadig & Voltaire Noir
Samsung NP300E7A-S09FR 17,3" LED
Samsung NP700Z5C 15.6" LED
Samsung NP-RC730-S07FR 17.3"LED
Samsung NX1000 Noir + Obj. Samsung NX 18 - 55 mm f/3.5 - 5.6 OIS
Samsung NX200 Noir + Obj. Samsung NX 20 - 50 mm f/3.5 - 5.6 ED i-Function + Flash SEF-8A NG8
Samsung NX 50 - 200 mm f/4.0 - 5.6 ED OIS II i-Fonction; Dédié Boîtiers Hybrides
Samsung NX 60 mm f/2.8 ED OIS SSA Macro i-Function; dédié Boîtiers Hybrides
Samsung NX 85 mm f/1.4 ED SSA i-Function; dédié Boîtiers Hybrides
Samsung NX Pancake 16 mm f/2.4 i-Function; dédié Boîtiers Hybrides
Samsung NX Pancake 20 mm f/2.8 i-Function; dédié Boîtiers Hybrides
Samsung NX Pancake 30 mm f/2.0; dédié Boîtiers Hybrides
Samsung Oreillette Bluetooth HM1200
Samsung Pack d'accessoire pour Galaxy S II I9100
Samsung Pack HMX-F800 Noir : Caméscope HD + Etui + Carte SDHC 4 Go
Samsung Pack HMX-Q200 Noir : Caméscope Full HD + Etui + Carte SDHC 4 Go
Samsung PC portable NP300E5A-S0AFR 15.6"LED
Samsung PL210 Noir
Samsung PL210 Noir + Carte mémoire Lexar MicroSDHC 8 Go
Samsung Player mini 2 c3310 - Gris Métal
Samsung Port parallèle ML-PAR100 pour imprimante
Samsung PS43E450
Samsung PS43E490 3D
Samsung PS43E490 3D + Console Xbox 360 4 Go
Samsung PS51E450
Samsung PS51E490 3D
Samsung PS51E530
Samsung Q3 noir 4 Go
Samsung Q3 rose 4 Go
Samsung RC530-S03FR 15,6" LED
Samsung RF712 E7P-C7261 17,3" LED 3D Blu-Ray USB 3.0 + lunettes
Samsung S19A100N Moniteur 18,5" - Flat Panel Display
Samsung S22B150N 21,5" LED
Samsung S22B350H 21,5" LED
Samsung S23A750D 23" LED 3D
Samsung S23B350H 23" LED
Samsung S23B550V Moniteur 23" LED
Samsung S24B300HL Moniteur 23,6" LED
Samsung S27B350H 27" LED
Samsung SCX-3405F - Imprimante Multifonctions
Samsung SCX-3405FW - Imprimante Multifonctions WiFi & Ethernet
Samsung SCX-3405 - Imprimante Multifonctions
Samsung SCX-3405W - Imprimante Multifonctions WiFi
Samsung SCX-4200A
Samsung SCX-4729FD - Imprimante Multifonctions Ethernet
Samsung SCX-4729FW - Imprimante Multifonctions Ethernet & WiFi
Samsung SCX-5737FW - Imprimante Multifonctions Ethernet
Samsung SE208AB Graveur DVD externe USB 2.0
Samsung SE-218BB graveur DVD externe ultra slim USB 2.0
Samsung SLB07A pour ST50
Samsung SLB-11A pour Samsung WB1000
Samsung ST200F Noir - WiFi
Samsung ST200F Rouge - WiFi
Samsung ST200F Violet - WiFi
Samsung ST65 Noir
Samsung ST65 Rouge
Samsung ST66 Noir
Samsung ST77 Blanc
Samsung ST77 Noir
Samsung ST77 Rouge
Samsung ST77 Violet
Samsung ST88 Noir
Samsung station d'accueil
Samsung station d'accueil HD2
Samsung Station d'accueil pour tablette Galaxy Tab 8,9"
Samsung station d'accueil SSD-760 E2/EUR
Samsung SyncMaster C23A550U 23" LED
Samsung SyncMaster C23A750X 23" LED
Samsung Syncmaster S23A700D 23" LED 3D
Samsung Syncmaster T22A550 21,5" LED Tuner TNT HD
Samsung Système de vidéosurveillance Baby Monitor SEW-3022WP/ EX
Samsung T22A300 21.5" Tuner TNT HD
Samsung T22B300EW 21,5" LED Tuner TNT HD
Samsung T24B301 24" LED Tuner TNT HD
Samsung T27A550 27" LED Tuner TNT HD
Samsung Toner MLT-D101S pour imprimantes Samsung SCX-3405 & ML-2165 - Noir
Samsung UE19ES4000 LED
Samsung UE22ES5000 LED
Samsung UE22ES5410 LED
Samsung UE26EH4000 LED
Samsung UE26EH4500 LED
Samsung UE32EH4000 LED
Samsung UE32EH5000 LED
Samsung UE32ES5500 LED
Samsung UE32ES6300 LED 3D
Samsung UE32ES6300 LED 3D + Console Xbox 360 4 Go
Samsung UE32ES6710 LED 3D blanc
Samsung UE37ES5500 LED
Samsung UE40D5000 LED
Samsung UE40D6500 LED 3D
Samsung UE40EH5000 LED
Samsung UE40ES5500 LED
Samsung UE40ES6300 LED 3D
Samsung UE40ES6300 LED 3D + Console Xbox 360 4 Go
Samsung UE40ES6710 LED 3D
Samsung UE46EH5000 LED
Samsung UE46ES5500 LED
Samsung UE46ES6300 LED 3D
Samsung UE46ES6300 LED 3D + Console Xbox 360 4 Go
Samsung UE46ES6710 LED 3D blanc
Samsung UE46ES8000 LED 3D
Samsung UE55ES6300 LED 3D
Samsung UE55ES6300 LED 3D + Console Xbox 360 4 Go
Samsung UE60ES6100 LED 3D
Samsung ultrabook NP530U3B 13,3" - Aluminium + Microsoft Explorer Touch Mouse - Souris BlueTrack sans fil
Samsung ultrabook NP530U3B 13,3" LED USB 3.0 - Aluminium
Samsung ultrabook NP530U3B 13,3" LED USB 3.0 - Aluminium+ Samsonite Sac pour ordinateur portable 14,1" S Noir
Samsung ultrabook NP530U3B-A02 13,3" LED USB 3.0 + CaseLogic Sacoche double pour ordinateurs 14" & tablettes 10,1" - Grise
Samsung Ultrabook NP530U3C 13,3" HD LED - Série 5 Ultra - Marron
Samsung Ultrabook NP530U3C 13,3" HD LED - Série 5 Ultra - Rose
Samsung Viseur électronique EVF10
Samsung Wave 575
Samsung WB150F Blanc - WiFi
Samsung WB150F Noir - WiFi
Samsung WB690 Noir
Samsung WB700 Noir
Samsung WB850F Noir - WiFi - GPS
Samsung WMN250M accroche murale
Samsung XE700T1A-A02FR 11,6" 64 Go SSD
Samsung YP-F3 bleu 2 Go
Samsung YP-F3 rose 2 Go
Samsung YP-Q3 rose 8 Go
Samsung YP-Q3 rose 8 Go + Casque JVC HA-S155-P rose
Samsung YP-U6 noir 2 Go
Samsung YP-U6 noir 4 Go
Samsung YP-U6 rose 2 Go
Samsung YP-U6 rose 4 Go
Samsung YP-Z3 blanc 4 Go
Samsung YP-Z3 bleu 4 Go
Samsung YP-Z3 rose 4 Go
Samyang 14 mm f/2.8 Aspherical IF ED UMC; Monture Samsung NX
Samyang 35 mm f/1.4 AS UMC; Monture Samsung NX
Samyang Fish-eye 8 mm f/3.5 Aspherical IF MC; Monture Samsung Type NX
Tablette Samsung Galaxy S WiFi 3,6" 8 Go
Tablette Samsung Galaxy S WiFi 3,6" 8 Go + Casque weSC Conga Matte noir
Tablette Samsung Galaxy S WiFi 4,2" 8 Go
Tablette Samsung Galaxy S WiFi 5" 8 Go
T'nB Coque Clip On pour Samsung Galaxy SII - New York
Toner Samsung CLT-C4072S - Cyan
Toner Samsung CLT-C4092S Cyan
Toner Samsung CLT-K4072S - Noir
Toner Samsung CLT-K4092S Noir
Toner Samsung CLT-M4072S - Magenta
Toner Samsung CLT-M4092S Magenta
Toner Samsung CLT-P4092C - Pack de 4 Toners
Toner Samsung CLT-Y4072S - Jaune
Toner Samsung CLT-Y4092S Jaune
Toner Samsung MLT-D1042S - Noir
We Digital by Samsung - Silver We 1 To USB 2.0
We Digital by Samsung - Silver WE 2 To USB 2.0
Xqisit Coque iPlate Glossy pour Samsung Galaxy S3 - Blanche
Xqisit Coque iPlate Style pour Samsung Galaxy S3 - Transparente/Blanche
Xqisit Coque iPlate Style pour Samsung Galaxy S3 - Transparente/Noire
Xqisit Coque Soft Grip pour Samsung Galaxy S3 - Blanche
Xqisit Coque Soft Grip pour Samsung Galaxy S3 - Noire
Xqisit Etui Flipcover pour Samsung Galaxy S3 - Blanc
Xqisit Etui Flipcover pour Samsung Galaxy S3 - Noir

Samsung - Aspirateur robot Navibot SR8845

Samsung - Aspirateur sans sac EcoStyle SC86G0 gris foncé/fuchsia

Samsung - Aspirateur sans sac SC4780 noir

Samsung - Four micro-ondes MW73B - blanc

SAMSUNG - Micro ondes 36 L - Micro ondes 36 L - CP1395ES

SAMSUNG - Micro ondes 42 L - Micro ondes 42 L - CQ1570U

Samsung - Micro-ondes combiné CE117PT-B

SAMSUNG - Micro-ondes Grill simultané GS89F-1SP

Samsung 305U1A 11,6" LED

Samsung 305U1A 11,6" LED + Office Famille et Etudiant 2010 1 poste

Samsung Aspirateur sans sac EcoStyle SC86H0 gris clair/bleu

Samsung B1930HD 18.5" LCD TNT HD

Samsung B5722 Double SIM

Samsung Bac papier supplémentaire ML-S3710A - 520 feuilles

Samsung Batterie ED-BP1310

Samsung batterie IA-BH130LB

Samsung batterie IA-BP420E

Samsung batterie IA-BP85ST

Samsung batterie SLB-10A

Samsung batterie SSB-690 ELS

Samsung BD-E5300

Samsung BD-E5500 3D

Samsung BD-E8300 3D

Samsung C3050 Stratus

Samsung Câble Adaptateur HDTV pour Galaxy Tab 8.9" / 10.1"

Samsung Câble data pour téléphones mobiles Samsung

Samsung Caméra additionnelle de vidéosurveillance SEB-1015RWP EX

Samsung caméra Skype CY-STC1100

Samsung CB20A12

Samsung Ch@t335 - GT-S3350 - Noir

Samsung Chargeur allume-cigares micro-USB

Samsung chargeur de voyage pour SGH-P260 et SGH-G600 - Modèle Noir

Samsung Chargeur secteur de voyage micro-USB

Samsung CLP-325 + Toner Samsung CLT-K4072S Noir

Samsung CLP-325 + Toner Samsung CLT-K4072S Noir

Samsung CLP-325 WiFi

Samsung CLP-325 WiFi + Toner Samsung CLT-K4072S Noir + MCL Samar câble imprimante USB 2.0

Samsung CLP-620ND - Imprimante Ethernet

Samsung CLP-C300A

Samsung CLP-K300A

Samsung CLP-M300A

Samsung CLP-Y300A

Samsung CLX-3185 + Toner Samsung CLT-K4072S Noir

Samsung CLX-3185 + Toner Samsung CLT-K4072S Noir

Samsung CLX-3185 + Toner Samsung CLT-K4072S Noir

Samsung CLX-3185FW WiFi

Samsung CLX-3185FW WiFi + Toner Samsung CLT-K4072S Noir + MCL Samar câble imprimante USB 2.0

Samsung CLX-3185N Ethernet

Samsung CLX-3185W - Imprimante Multifonctions WiFi & Ethernet

Samsung CLX-6220FX - Imprimante Multifonctions Ethernet

Samsung Coque silicone Croisillons pour nexus S

Samsung CY-SMN1000D meuble TV

Samsung Disque Dur interne SSD 128 Go MZ-7PC128D 830 Series

Samsung Disque Dur interne SSD 128 Go MZ-7PC128N 830 Series

Samsung Disque Dur interne SSD 256 Go MZ-7PC256D 830 Series

Samsung Disque Dur interne SSD 256 Go MZ-7PC256N 830 Series

Samsung Disque Dur interne SSD 64 Go MZ-7PC064D 830 Series

Samsung dongle Wi-Fi WIS12ABGNX

Samsung DP7000A3B 23" LED Tactile USB 3.0

Samsung Duo de 2 coques pour Samsung Galaxy II I9100 - 1 Noire + 1 Camel

Samsung Duo de 2 coques pour Samsung Galaxy II I9100 - 1 Noire matelassée + 1 Rose

Samsung DV300F Argent/Rouge - WiFi

Samsung DV300F Noir - WiFi

Samsung E1150 - Silver

Samsung E2550

Samsung EcoBlue SC61E0 bleu azur

Samsung ES30 Noir

Samsung ES30 Noir + Carte SD 2 Go

Samsung Etui coque pour Galaxy Note - Noir

Samsung Etui cuir pour Galaxy S II - Noir

Samsung Etui flap en cuir pour Samsung Galaxy II I9100 - Noir

Samsung Eui cuir pour i9000 Galaxy S

Samsung Flash SEF15A

Samsung Flash SEF20A

Samsung Galaxy Ace s5830 (sous Androïd)

Samsung Galaxy Mini (sous Android)

Samsung Galaxy Note

Samsung Galaxy Note - Blanc

Samsung Galaxy Note - Rose

Samsung Galaxy S2 (I9100G) - Blanc

Samsung Galaxy S2 (I9100G) - Noir

Samsung Galaxy Tab 10,1" TFT Blanc 32 Go + Western Digital My Book Live 1 To Ethernet

Samsung Galaxy Tab 10,1" TFT Blanc 32 Go Wifi

Samsung Galaxy Tab 10,1" TFT Noir 16 Go 3G

Samsung Galaxy Tab 8,9" TFT Blanc 32 Go Wifi

Samsung Galaxy Xcover s5690 (sous Androïd) - Smartphone Samsung Solide certifié IP67

Samsung Galaxy Y Pro B5510 (sous Androïd)

Samsung Galaxy Y Young s5360 (sous Androïd)

Samsung Graveur DVD Externe Wifi - SE-208BW - Noir

Samsung Housse Folio pour Galaxy Tab 10,1"

Samsung Housse Folio pour Galaxy Tab 8,9"

Samsung HT-D330

Samsung HT-D350

Samsung HT-D423

Samsung HT-D4500

Samsung HT-D5000 3D

Samsung HT-E4200 3D

Samsung HT-E4500 3D

Samsung HT-E5200 3D

Samsung HT-ES6200 3D WiFi

Samsung HW-E450

Samsung I9103 Galaxy R (sous Android)

Samsung Kit de connexion USB & SD pour Galaxy Tab 10.1"

Samsung Kit de vidéosurveillance tout-en-un SDE-3003P/EX

Samsung Kit de vidéosurveillance tout-en-un SME-4220

Samsung Kit Etui + Clavier Bluetooth pour Galaxy Tab 10,1" - Brun foncé

Samsung kit HDMI

Samsung kit HDMI

Samsung kit papier 10 x 15 cm

Samsung kit piéton filaire stéréo Jack 3,5 mm

Samsung LE40D550

Samsung Lot de 2 protections d'écran pour Galaxy S2 - Transparente/Miroir

Samsung Lot de 2 Protections d'écran pour i9000 Galaxy S

Samsung Lunettes 3D SSG-3050GB

SAMSUNG ME106V-SX

Samsung ME82V Micro-onde monofonction

SAMSUNG ME82V-SX

SAMSUNG Micro ondes MW87Y

SAMSUNG Micro-ondes combiné CE117APT B

SAMSUNG Micro-ondes combiné CE137NEMX

SAMSUNG Micro-ondes FW113T002

Samsung ML-1630/SCX4500

Samsung ML-2010D3

Samsung ML-2165 - Imprimante Monochrome

Samsung ML-2165W - Imprimante WiFi

Samsung ML-2545 - Imprimante Monochrome

Samsung ML-2955DW - Imprimante Ethernet & WiFi

Samsung ML-2955ND - Imprimante Ethernet

Samsung ML-3310D - Imprimante Monochrome

Samsung ML-3710DW - Imprimante Ethernet & WiFi

Samsung MLT-D1052S

Samsung MLT-D1082S

Samsung MLT-D1092S

Samsung MM-D430D

Samsung MV800 Noir

Samsung MV800 Noir + Etui Zadig & Voltaire Noir

Samsung NP300E7A-S03FR 17,3" LED

Samsung NP700Z5A-S02FR 15,6" LED

Samsung NX 60 mm f/2.8 ED OIS SSA Macro i-Function; dédié Boîtiers Hybrides

Samsung NX 85 mm f/1.4 ED SSA i-Function; dédié Boîtiers Hybrides

Samsung NX Pancake 16 mm f/2.4 i-Function; dédié Boîtiers Hybrides

Samsung NX Pancake 20 mm f/2.8 i-Function; dédié Boîtiers Hybrides

Samsung NX Pancake 30 mm f/2.0; dédié Boîtiers Hybrides

Samsung NX200 Noir + Obj. Samsung NX 18 - 55 mm f/3.5 - 5.6 OIS + Flash SEF-8A NG8

Samsung NX200 Noir + Obj. Samsung NX 20 - 50 mm f/3.5 - 5.6 ED i-Function + Flash SEF-8A NG8

Samsung Oreillette Bluetooth HM1200

Samsung Pack d'accessoire pour Galaxy S II I9100

Samsung Pack étui cuir + chargeur + protection d'écran pour Galaxy S

Samsung PL170 Noir

Samsung PL210 Noir

Samsung PL210 Noir + Carte mémoire Lexar MicroSDHC 8 Go

Samsung PL90 Noir et Rouge

Samsung Player mini 2 c3310 - Gris Métal

Samsung Player Mini C3300 - Noir

Samsung Port parallèle ML-PAR100 pour imprimante

Samsung PS43D450

Samsung PS43E450

Samsung PS43E490 3D

Samsung PS51E450

Samsung PS51E490 3D

Samsung PS59D530

Samsung Q3 rose 4 Go

Samsung RC530-S03FR 15,6" LED

Samsung RC730-S06FR 17,3" LED

Samsung RF712 E7P-C7261 17,3" LED 3D Blu-Ray USB 3.0 + lunettes

Samsung S22A300B 21,5" TFT

Samsung S22B350H 21,5" LED

Samsung S23A750D 23" LED 3D

Samsung S23B350H 23" LED

Samsung S24B300HL Moniteur 23,6" LED

Samsung S27B350H 27" LED

Samsung SC4340 noir ébène

Samsung SC4790 - Aspirateur sans sac - traineau - rouge

Samsung SCX-3405 - Imprimante Multifonctions

Samsung SCX-3405F - Imprimante Multifonctions

Samsung SCX-3405FW - Imprimante Multifonctions WiFi & Ethernet

Samsung SCX-3405W - Imprimante Multifonctions WiFi

Samsung SCX-4200A

Samsung SCX-4729FD - Imprimante Multifonctions Ethernet

Samsung SCX-4729FW - Imprimante Multifonctions Ethernet & WiFi

Samsung SCX-5737FW - Imprimante Multifonctions Ethernet

Samsung SE-084D graveur DVD externe slim USB 2.0

Samsung SE208AB Graveur DVD externe USB 2.0

Samsung SLB07A pour ST50

Samsung SLB-11A pour Samsung WB1000

Samsung ST65 Noir

Samsung ST65 Rouge

Samsung station d'accueil

Samsung station d'accueil HD2

Samsung Station d'accueil pour tablette Galaxy Tab 10,1"

Samsung Station d'accueil pour tablette Galaxy Tab 8,9"

Samsung station d'accueil SSD-760 E2/EUR

Samsung SyncMaster C23A550U 23" LED

Samsung SyncMaster C23A750X 23" LED

Samsung Syncmaster S23A700D 23" LED 3D

Samsung SyncMaster S24A350H 24" LED

Samsung Syncmaster T22A550 21,5" LED Tuner TNT HD

Samsung Système de vidéosurveillance Baby Monitor SEW-3022WP/ EX

Samsung T22A350 21,5" LED Tuner TNT

Samsung Toner MLT-D101S pour imprimantes Samsung SCX-3405 & ML-2165 - Noir

Samsung UE19D4010 LED

Samsung UE19ES4000 LED

Samsung UE22ES5000 LED

Samsung UE22ES5410 LED

Samsung UE26EH4000 LED

Samsung UE26EH4500 LED

Samsung UE32D5000 LED

Samsung UE32EH4000 LED

Samsung UE32EH5000 LED

Samsung UE32ES5500 LED

Samsung UE32ES6300 LED 3D

Samsung UE32ES6710 LED 3D blanc

Samsung UE40D5000 LED

Samsung UE40D5710 LED

Samsung UE40D6500 LED 3D

Samsung UE40EH5000 LED

Samsung UE40ES5500 LED

Samsung UE40ES6300 LED 3D

Samsung UE40ES6710 LED 3D

Samsung UE46EH5000 LED

Samsung UE46ES5500 LED

Samsung UE46ES6300 LED 3D

Samsung UE46ES6710 LED 3D blanc

Samsung UE55ES6300 LED 3D

Samsung ultrabook NP530U3B-A02 13,3" + Microsoft Explorer Touch Mouse - Souris BlueTrack sans fil

Samsung ultrabook NP530U3B-A02 13,3" LED USB 3.0

Samsung ultrabook NP530U3B-A02 13,3" LED USB 3.0 + CaseLogic Sacoche double pour ordinateurs 14" & tablettes 10,1" - Grise

Samsung ultrabook NP530U3B-A02 13,3" LED USB 3.0 + Samsonite Sac pour ordinateur portable 14,1" S Noir

Samsung ultrabook NP530U4B-S01FR 14" LED + Microsoft Explorer Touch Mouse - Souris BlueTrack sans fil

Samsung ultrabook NP530U4B-S01FR 14" LED USB 3.0

Samsung ultrabook NP530U4B-S01FR 14" LED USB 3.0 + CaseLogic Sacoche double pour ordinateurs 14" & tablettes 10,1" - Grise

Samsung ultrabook NP530U4B-S01FR 14" LED USB 3.0 + Samsonite Sac pour ordinateur portable 14,1" S Noir

Samsung Viseur électronique EVF10

Samsung WB150F Blanc - WiFi

Samsung WB150F Noir - WiFi

Samsung WB700 Noir

Samsung WB750 Noir

Samsung WIS09ABGN LinkStick WLAN-Adapter

Samsung WMN250M accroche murale

Samsung YP-F3 bleu 2 Go

Samsung YP-F3 noir 2 Go

Samsung YP-F3 rose 2 Go

Samsung YP-Q3 rose 8 Go

Samsung YP-Q3 rose 8 Go + Casque JVC HA-S155-P rose

Samsung YP-U6 noir 2 Go

Samsung YP-U6 noir 4 Go

Samsung YP-U6 rose 2 Go

Samsung YP-U6 rose 4 Go

Samsung YP-Z3 blanc 4 Go

Samsung YP-Z3 bleu 4 Go

Samsung YP-Z3 rose 4 Go

PDP-MONITOR (PLASMA DISPLAY PANEL) PPM42M5S PPM42M5H PPM50M5H PPM63M5H Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS Picture In Picture (PIP) VIDEO WALL MDC (Multiple Display Control) Screen Burn Protection Digital Natural Image engine Intended for Commercial Use and Operation Register your product at www.samsung.com/global/register This device is a Class B digital apparatus. BN68-00848A-00Eng_0404 4/4/05 3:57 PM Page 1English - 2 User Instructions ◆ Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP Monitor) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. ◆ Height The PDP Monitor can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do not install and operate there. ◆ Heat on the top of the PDP Monitor The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product. ◆ The product is making a ‘cracking’ noise. A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding environment such as temperature or humidity. This is normal and not a defect of the unit. ◆ Cell Defects The PDP Monitor uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require sophisticated technology to produce. However, there may a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. ◆ Avoid operating the PDP Monitor at temperatures below 5°C(41°F) ◆ A still image displayed too long may cause permanent damage to the PDP Monitor Panel Watching the PDP Monitor in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effect to the screen. Damage caused by the above effect are not covered by the Warranty. ◆ Afterimage on the Screen. Displaying still images from Video games and PC for longer than a certain period of time may produce partial afterimages. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a long time. ◆ Warranty - Warranty does not cover any damage caused by image retention. - Burn-in is not covered by the warranty. ◆ Installation Be sure to contact an authorized service center, when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, chemical substance and where it operates for 24 hours such as the airport, the train station or etc. Failure to do so may cause a serious damage to your monitor. Installing the product in an airtight place may shorten the lifetime of the product. BN68-00848A-00Eng_0404 4/4/05 3:57 PM Page 2Owner’s Instructions Remote Control/ AAA Batteries Power Cord PC Cable Checking Parts Install CD - MDC Software (RS-232C) PPM42M5S/ 42M5H/50M5H Stand-Base (2EA) Screws (4EA) English - 3 e g h Ferrite Cores for Speaker Wire (2EA) (Refer to page 14) BN68-00848A-00Eng_0404 4/4/05 3:57 PM Page 3Contents ◆ FOREWORD ■ User Instructions............................................................................................ 2 ◆ CONNECTING AND PREPARING YOUR DISPLAY ■ Control Panel................................................................................................. 6 ■ Infrared Remote Control................................................................................ 8 ■ Inserting the Batteries in the Remote Control................................................ 9 ■ Assembling the Stand-Base .......................................................................... 9 ■ Installing the Display on the Wall Attachment Panel ..................................... 10 ■ Installing the Display Vertically...................................................................... 12 ■ Before Using the Video Wall and the Multiple Display Control function ........ 12 ■ Connecting Speakers .................................................................................... 13 ■ Switching Your PDP Monitor On and Off....................................................... 15 ■ Choosing Your Language.............................................................................. 15 ◆ USING YOUR DISPLAY ■ Changing the Picture Standard ..................................................................... 16 ■ Customizing the Picture Settings................................................................... 17 ■ Adjusting the RGB Color (PC Mode)............................................................. 18 ■ Setting the Picture (PC Mode)....................................................................... 19 ■ Using Zoom function (PC Mode) ................................................................... 21 ■ Viewing the PC Information........................................................................... 22 ■ Selecting the Picture Size.............................................................................. 23 ■ Freezing the Current Picture ......................................................................... 24 ■ Changing the Sound Standard ...................................................................... 24 ■ Extra Sound Settings..................................................................................... 25 ■ Activating Panel Button Lock......................................................................... 26 ■ Activating Remote Control Button Lock......................................................... 27 ■ Setting Up Your Personal ID Number............................................................ 28 English - 4 BN68-00848A-00Eng_0404 4/4/05 3:57 PM Page 4Contents(continued) ◆ USING YOUR DISPLAY (CONTINUED) ■ Setting the MDC (Multiple Display Control)................................................... 29 ■ Preventing Screen Burn-in ............................................................................ 30 ■ Reducing the Effects of Screen Burn ............................................................ 31 ■ Setting the Screen Burn Protection Timer..................................................... 32 ■ Setting the Multiple Screen............................................................................ 33 ■ Displaying the Setting Information................................................................. 34 ■ Setting and Displaying the Current Time....................................................... 34 ■ Switching the PDP Monitor On and Off Automatically................................... 35 ■ Selecting the Fan........................................................................................... 37 ■ Setting the Film Mode.................................................................................... 38 ■ Viewing the Picture in Picture (PIP)............................................................... 39 ■ Listening to the Sound of the Sub Picture ..................................................... 41 ■ Viewing an External Signal Source ............................................................... 42 ◆ ADDITIONAL INFORMATION AND CONNECTIONS ■ Connecting to the Audio/Video Input............................................................. 43 ■ Connecting to the S-Video Input.................................................................... 44 ■ Connecting to the Component Input.............................................................. 44 ■ Connecting to the DVD/DTV Receiver Input ................................................. 45 ■ Connecting to the DVI Input .......................................................................... 46 ■ Connecting to the PC Input ........................................................................... 46 ■ Setting up Your PC Software (Windows only)............................................... 47 ■ Input Mode (PC/DVI) ..................................................................................... 48 ■ Power Saver (PC1 mode only)...................................................................... 49 ◆ RECOMMENDATIONS FOR USE ■ Troubleshooting: Before Contacting Service Personnel................................ 50 ■ Technical Specifications................................................................................ 51 ■ Dimension...................................................................................................... 52 ☛ ➢ Press Important Note Symbols English - 5 BN68-00848A-00Eng_0404 4/4/05 3:57 PM Page 5➢ Control Panel Front of the PDP Monitor ➢ The actual configuration of your PDP Monitor may be different, depending on your model. a) b c) ➢ d ➢ e) ➢ English - 6 ➢ ◆ You can use the SEL , buttons to switch on the PDP Monitor when it is in standby mode depending on the model. ◆ The VOL -, + and SEL , buttons have the same function as the ▲/▼/œ/√ buttons on the remote control. ◆ If the remote control no longer works or you have misplaced it, you can use the controls on the panel of the PDP Monitor. ➢ ➢ c SOURCE - Select the external input source. - Store your settings in the menu. - When the Main menu is displayed on screen, the Main menu is not operated with source key. MENU Display the on-screen menu. -VOL + - Adjust the volume. - Adjust an option value respectively. (VOL + : Enter to the selected menu.) SEL Control the cursor in the menu. I / Press to turn the PDP Monitor on and off. a Power Indicator - Power Off; Black - Power On; Green b Remote Control Sensor Aim the remote control towards this spot on the PDP Monitor. c Speaker Speaker a b c BN68-00848A-00Eng_0404 4/4/05 3:57 PM Page 6Control Panel (continued) ➢ The actual configuration of your PDP Monitor may be different, depending on your model. Rear Panel a) POWER IN Connect the supplied power cord. b) EXT SPEAKER (8Ω) Connect external speakers. c) PC1 IN/OUT -IN : Connect to the video output jack on your PC. -OUT :Connect to the video input jack on external devices. -AUDIO : Connect to the audio output jack on your PC. ➢ AUDIO is an audio input jack for PC1 and PC2 modes. d) PC2 (BNC) IN Connect for RGB(Y/PB/PR)HV video signal input from the PC. ➢ “PC Mode” from this page onward means PC1/PC2 mode using RGB1(PC1) and RGB2(PC2). e) RS-232C -IN : Used for the MDC function when connecting PC or RS-232C output of another PDP Monitor. -OUT : Used for the MDC function when connecting with RS-232C input of another PDP Monitor. ➢ For further details about connections, refer to Page 12. f) DVI IN -DVI : Connect to the video output jack for device with DVI output. -AUDIO : Connect to the audio output jack for devices with DVI output. g) COMPONENT IN Video (Y/PB/PR) and audio (L/R) inputs for component. h) AV (VIDEO/AUDIO L/R) -IN : Video and audio inputs for external devices, such as a camcorder or VCR. -OUT :Outputs for external devices. i) S-VIDEO IN Video input for external devices with an S-Video output, such as a camcorder or VCR. a b c ➢ d ➢ e ➢ English - 7 ➢ For further details about connection, refer to pages 43~46. ➢ Whenever you connect an audio or video system to your PDP Monitor, ensure that all elements are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions. c BN68-00848A-00Eng_0404 4/4/05 3:57 PM Page 7Infrared Remote Control Y yo PDP MONITOR ON DIRECT CHANNEL SELECTION VOLUME INCREASE TEMPORARY SOUND SWITCH-OFF MENU DISPLAY MOVE TO THE REQUIRED MENU OPTION/ ADJUST AN OPTION VALUE RESPECTIVELY PICTURE EFFECT SELECTION EXTERNAL INPUT SELECTION EXIT FROM ANY DISPLAY PREVIOUS CHANNEL CONFIRM YOUR CHOICE (STORE OR ENTER) INFORMATION DISPLAY PIP FUNCTIONS: - PIP ACTIVATION OR DEACTIVATION (PIP) - SWAPPING THE MAIN AND THE SUB PICTURE (SWAP) - SIZE SELECTION (SIZE) - SOURCE SELECTION (SOURCE) PICTURE SIZE NOT AVAILABLE SETTING THE TIMER AUTO ADJUSTMENT IN PC MODE PDP MONITOR OFF PICTURE STILL SOUND EFFECT SELECTION VOLUME DECREASE NEXT CHANNEL ➢ The performance of the remote control may be affected by bright light. ➢ English - 8 BN68-00848A-00Eng_0404 4/4/05 3:57 PM Page 8You must insert or replace the batteries in the remote control when you: ◆ Purchase the PDP Monitor ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to remove it. 2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to respect the polarities: ◆ - on the battery against - on the remote control ◆ + on the battery against + on the remote control 3 Replace the cover by aligning it with the base of the remote control and pressing it back into place. Do not mix battery types, i.e. alkaline and manganese. Inserting the Batteries in the Remote Control Assembling the Stand-Base 1 Assemble the PDP Monitor with the stand and firmly secure the PDP Monitor using 4 screws provided. ➢ Two or more people should carry the PDP Monitor. Never lay the PDP Monitor on the floor because of possible damage to the screen. Always store the PDP Monitor upright. English - 9 BN68-00848A-00Eng_0404 4/4/05 3:57 PM Page 9English - 10 ➢ ◆ Installing the Display on the Wall Attachment Panel Wall Bracket Components Plastic Hanger: 4 Screw : 11 Screw : 4 Anchor : 11 Wall Bracket Assembly Installation Notes ◆ Contact a technician for installing the wall bracket. ◆ Samsung Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. ◆ This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood. Hinge Accessories ➢ Refer to the correct installation guide according to your wall bracket. 1 Insert and tighten the Captive Screw in the direction of the arrow. When done, mount the wall bracket on the wall. 2 Before drilling into the wall, check if the length between the two locking holes at the back of the product is correct. If the length is too short or long, loosen all or some of the 4 screws on the wall bracket to adjust the length. 3 Check the installation diagram and mark the drill points on the wall. Use the 5.0 mm bit to drill holes deeper than 35 mm. Fix each anchor in the corresponding hole. Match each of the brackets and hinge holes to the corresponding anchor holes and insert and tighten the 11 screws . Length between the two locking holes Captive Screw Wall Bracket Hinge (Right) There are two hinges (left and right). Use the correct one. Hinge (Left) 1 Left: 1 Right: 1 ◆ Only use the components and accessories shipped with the product. BN68-00848A-00Eng_0404 4/4/05 3:57 PM Page 10English - 11 Installing the Display on the Wall Attachment Panel (continued) 1 Remove the 4 screws on the back of the product. 3 Tighten the 4 screws in step 2 (plastic hanger + screw ) to the rear holes of the product. 2 Insert the screw into the plastic hanger. (See the figure below) ☛ ◆ Mount the product on the wall bracket and make sure it is properly fixed to the left and right plastic hangers. ◆ Be careful when installing the product on the bracket as fingers can be caught in the holes. ◆ Make sure the wall bracket is securely fixed to the wall, or the product may not stay in place after installation. 4 Remove safety pin (#) and insert the 4 product holders into the corresponding bracket holes (!). Then place the product (@) so that it is firmly fixed to the bracket. Make sure to reinsert and tighten the safety pin (#) to securely hold the product to the bracket. Wall Bracket Angle Adjustment ➢ Adjust the bracket angle to -2 o before installing it on the wall. ◆ The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) PDP Monitor Wall Bracket Wall 1 Fix the product to the wall bracket. 2 Hold the product at the top in the center and pull it forward (direction of the arrow) to adjust the angle. (See the figure to the right) 3 You can adjust the bracket angle between -2° and 15°. Make sure to use the top center, and not the left or the right side of the product to adjust the angle. To mount the product on the wall bracket t. BN68-00848A-00Eng_0404 4/4/05 3:57 PM Page 11Installing the Display Vertically You can install the PDP Monitor vertically. In this case, the fan automatically works. If you wish to stop the fan, position the PDP Monitor horizontally and then set “Fan” to “Off” in the “Function” menu. Please use the wall attachment panel exclusively when installing vertically. And you have to put left side of the PDP Monitor on top when viewed from front. Before Using the Video Wall and the Multiple Display Control function Example for Multiple Display Control connections 1 Please create ID for each PDP Monitor before installing them close together. It may be difficult to create IDs when operating the remote control for PDPs that are installed close to each other. 2 For details about Video Wall configuration and operation, refer to “Setting the Multiple Screen” on page 33. ➢ ◆ You can connect a VCR without a distributor as you would connect a PC. ◆ Select ID input on the menu. Use the numeric buttons to enter the ID for PDP Monitor adjustment. You can operate the remote control only for the PDP Monitor that has been selected. ◆ For details about Multiple Display Control, refer to “Setting the MDC (Multiple Display Control)” on page 29 and the Help section in MDC program CD. Example for 2x2 Video Wall function Example for 2x2 Video Wall connections Rear of the PDP Monitor Rear of the PDP Monitor ① ② English - 12 ➢ BN68-00848A-00Eng_0404 4/4/05 3:57 PM Page 12Connecting Speakers 1 Remove the screws on the rear of the PDP Monitor. 2 Hang the two “T” shaped hangers on the square holes on the rear of the PDP Monitor. 3 Tighten the PDP Monitor and the speaker bracket using the screws removed from the PDP Monitor. ➢ When moving your PDP Monitor, do NOT hold the speaker connected to your PDP Monitor. It may damage the bracket clamping the speaker and your PDP Monitor together and result in a drop of your PDP Monitor and a risk of personal damage and injury. PPM42M5S PPM42M5H PPM50M5H PPM63M5H PPM42M5S PPM42M5H PPM50M5H PPM63M5H PPM42M5S PPM42M5H PPM50M5H PPM63M5H p English - 13 ➢ Speakers are optional. You have to purchase the speakers additionally. BN68-00848A-00Eng_0404 4/4/05 3:57 PM Page 13W se in T Connecting Speakers (continued) Ferrite Cores The ferrite cores are used to attenuate undesired signals. When connecting cables, attach one of these ferrite cores to the cable near the connector. Connect the speaker audio cable to the external speaker output jack on the rear of the PDP Monitor matching the “+” and “-” ends of the cable with the diagram on the PDP Monitor. ➢ ◆ The speakers MUST have a power handling capability of 10 watts minimum (impedance 8Ω). ◆ When you connect the speaker wire to the external speaker out connector, first bind the speaker wire round the ferrite core to secure it. English - 14 BN68-00848A-00Eng_0404 4/4/05 3:57 PM Page 14When you start using your PDP Monitor for the first time, you must select the language which will be used for displaying menus and indications. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the … or † button to select Setup. Result: The Setup menu is displayed. 3 Press the ENTER ( ) button. 4 Press the … or † button to select Language. Press the ENTER ( ) button. Result: The available languages are listed. 5 Select the appropriate language by pressing the … or † button. Press the ENTER ( ) button. Choosing Your Language The mains lead is attached to the rear of your PDP Monitor. 1 Plug the mains lead into an appropriate socket. Result: The Standby indicator on the front of the PDP Monitor lights up. ➢ The main voltage is indicated on the rear of the PDP Monitor and the frequency is 50 or 60Hz. 2 Press the “ ” button on the front of the PDP Monitor (or the ON ( ) button on the remote control) to switch the PDP Monitor on. 3 To switch your PDP Monitor off, press the “ ” button again (or the OFF ( ) button on the remote control). T Front of the PDP Monitor Switching Your PDP Monitor On and Off English - 15 Time Language : English PC Setup Move Enter Return TV Time Language : English PC Setup Move Enter Return TV English Français Deutsch Italiano Español Português BN68-00848A-00Eng_0404 4/4/05 3:58 PM Page 15Y co You can select the type of picture which best corresponds to your viewing requirements. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the … or † button to select Picture. Result: The Picture menu is displayed. 3 Press the ENTER ( ) button. Result: The Mode is selected. 4 Press the ENTER ( ) button again. Result: The available options are listed. 5 Select the required option by pressing the … or † button. Result: The following options are available. ◆ Dynamic - Standard - Movie - Custom ◆ Entertain - Internet - Text - Custom : PC or DVI Mode. 6 Press the ENTER ( ) button. ➢ You can also set these options simply by pressing the P.MODE (Picture Mode) button on the remote control. Changing the Picture Standard English - 16 Mode : Dynamic Custom Color Tone : Normal Color Control Film Mode : Off Size : 16:9 PIP Picture Move Enter Return TV Mode : Dynamic Custom Color Tone : Normal Color Control Film Mode : Off Size : 16:9 PIP Picture Move Enter Return TV Dynamic Standard Movie Custom BN68-00848A-00Eng_0404 4/4/05 3:59 PM Page 16Your PDP Monitor has several setting options that allow you to control the picture quality. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the … or † button to select Picture. Result: The Picture menu is displayed. 3 Press the ENTER ( ) button. Result: The Mode is selected. 4 Press the … or † button to select Custom. Press the ENTER ( ) button. 5 Select the required option by pressing the … or † button. Result: The following options are available. ◆ Contrast - Brightness - Sharpness - Color - Tint (NTSC only) ◆ Contrast - Brightness : PC or DVI Mode. 6 Press the ENTER ( ) button. Result: The horizontal bar is displayed. Press the œ or √ button until you reach the optimal setting. ➢ ◆ Press the … or † button to select other option(s). ◆ When the picture mode is set to Custom, the settings values may vary depending on the input source. (ex. AV, Component, PC, or DVI.) 7 Press the ENTER ( ) button. 8 Press the MENU ( ) button to return to the Picture menu. Press the … or † button to select Color Tone. Press the ENTER ( ) button. 9 Select the required option by pressing the … or † button. Result: The following options are available. ◆ Cool2 - Cool1 - Normal - Warm1 - Warm2 ◆ Custom - Cool - Normal - Warm : PC Mode. ◆ Cool - Normal - Warm : DVI Mode. 10 Press the ENTER ( ) button. Customizing the Picture Settings English - 17 Contrast 100 Mode : Dynamic Custom Color Tone : Normal Color Control Film Mode : Off Size : 16:9 PIP Picture Move Enter Return TV Mode : Dynamic Custom Color Tone : Normal Color Control Film Mode : Off Size : 16:9 PIP Picture Move Enter Return TV Mode : Dynamic Custom Color Tone : Normal Color Control Film Mode : Off Size : 16:9 PIP Picture Move Enter Return TV Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R 50 Custom Move Enter Return TV Cool2 Cool1 Normal Warm1 Warm2 BN68-00848A-00Eng_0404 4/4/05 3:59 PM Page 17Adjusting the RGB Color (PC Mode) English - 18 ➢ 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the … or † button to select Picture. Result: The Picture menu is displayed. 3 Press the ENTER ( ) button. 4 Press the … or † button to select Color Tone. Press the ENTER ( ) button. 5 Press the … or † button to select Custom. Press the ENTER ( ) button. ➢ This feature is not available when the input source is DVI mode. 6 Press the … or † button to select Color Control. Press the ENTER ( ) button. 7 Select the required option (Red, Green, or Blue) by pressing the … or † button. 8 Press the ENTER ( ) button. Result: The horizontal bar is displayed. Press the œ or √ button until you reach the optimal setting. ➢ Press the … or † button to select other option(s). 9 Press the ENTER ( ) button. ➢ Preset to the PC mode by pressing the SOURCE ( ) button. Mode : Entertain Custom Color Tone : Custom Color Control Film Mode : Off Size : 16:9 PIP Picture Move Enter Return TV Mode : Entertain Custom Color Tone : Custom Color Control Film Mode : Off Size : 16:9 PIP Picture Move Enter Return TV Red 50 Green 50 Blue 50 Color Control Move Enter Return TV Red 50 BN68-00848A-00Eng_0404 4/4/05 3:59 PM Page 18Setting the Picture (PC Mode) English - 19 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the … or † button to select Setup. Result: The Setup menu is displayed. 3 Press the ENTER ( ) button. 4 Press the … or † button to select PC. Press the ENTER ( ) button. Result: The PC menu is displayed. 5 Press the ENTER ( ) button again to select Auto Adjustment. Result: The screen quality and position are automatically reset. The settings are all finished, and the PDP Monitor will automatically return to the previous picture. 6 Press the … or † button to select Image Lock. Press the ENTER ( ) button. 7 Press the … or † button to select the option (Coarse or Fine) to be adjusted. Press the ENTER ( ) button. Result: The horizontal bar is displayed. Press the œ or √ button until you reach the optimal setting. ➢ Press the … or † button to select other option(s). 8 Press the ENTER ( ) button. ➢ Preset to the PC mode by pressing the SOURCE ( ) button. Time Language : English PC Setup Move Enter Return TV Auto Adjustment Image Lock Position Zoom Information PC Move Enter Return TV Auto Adjustment Image Lock Position Zoom Information PC Move Enter Return TV Coarse 50 Fine 65 Image Lock Move Enter Return TV Auto Adjustment in Progress. Please wait. i Coarse 50 BN68-00848A-00Eng_0404 4/4/05 3:59 PM Page 199 Press the MENU ( ) button. Result: The PC menu is displayed again. 10 Press the … or † button to select Position. Press the ENTER ( ) button. 11 Adjust the position by pressing the …, †, œ, or √ button. 12 Press the ENTER ( ) button. ➢ Preset to the PC mode by pressing the SOURCE ( ) button. English - 20 Setting the Picture (PC Mode) (continued) Auto Adjustment Image Lock Position Zoom Information PC Move Enter Return TV Position Adjust Return TV ➢ BN68-00848A-00Eng_0404 4/4/05 3:59 PM Page 20Using Zoom function (PC Mode) English - 21 Zoom : 1 Position Reset Zoom Move Enter Return TV Zoom : 1 Position Reset Zoom Move Enter Return TV Zoom : 0 Position Reset Zoom Move Enter Return TV 0 1 2 3 4 5 6 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the … or † button to select Setup. Result: The Setup menu is displayed. 3 Press the ENTER ( ) button. 4 Press the … or † button to select PC. Press the ENTER ( ) button. Result: The PC menu is displayed. 5 Press the … or † button to select Zoom. Press the ENTER ( ) button. 6 Press the ENTER ( ) button again. Select the required option by pressing the … or † button. Result: The following options are available. 0 - 1 - 2 - 3 - 4 - 5 - 6 ➢ ◆ Option 0 represents a normal screen. The greater the number, the more magnified the screen. ◆ You can select the position and reset functions by selecting options 1 through 6. (If you select option 0, the position and reset functions are not selected.) ◆ If you have selected the Zoom function as between 1~6, you will not be able to select the Auto Adjustment function 7 Press the ENTER ( ) button. 8 Press the … or † button to select Position. Press the ENTER ( ) button. 9 Adjust the position by pressing the …, †, œ, or √ button. 10 Press the MENU ( ) button. Result: The Zoom menu is displayed again. 11 To return the factory defaults, select Reset by pressing the … or † button. Press the ENTER ( ) button. Result: The previously adjusted settings will be reset to the factory defaults. ➢ Preset to the PC mode by pressing the SOURCE ( ) button. Time Language : English PC Setup Move Enter Return TV Auto Adjustment Image Lock Position Zoom Information PC Move Enter Return TV BN68-00848A-00Eng_0404 4/4/05 3:59 PM Page 21Y re Po You can view the current resolution and frequency of your pc. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the … or † button to select Setup. Result: The Setup menu is displayed. 3 Press the ENTER ( ) button. 4 Press the … or † button to select PC. Press the ENTER ( ) button. Result: The PC menu is displayed. 5 Press the … or † button to select Information. 6 Press the ENTER ( ) button. Result: The resolution, vertical frequency and horizontal frequency are displayed. 7 Press the MENU ( ) button. Viewing the PC Information English - 22 Resolution 1024*768 H-Frequency 48.3 KHz V-Frequency 59 Hz Information Return TV Time Language : English PC Setup Move Enter Return TV Auto Adjustment Image Lock Position Zoom Information PC Move Enter Return TV ➢ Preset to the PC mode by pressing the SOURCE ( ) button. BN68-00848A-00Eng_0404 4/4/05 3:59 PM Page 22You can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the … or † button to select Picture. Result: The Picture menu is displayed. 3 Press the ENTER ( ) button. 4 Press the … or † button to select Size. Press the ENTER ( ) button. 5 Select the required option by pressing the … or † button. Result: The following options are available. ◆ 16:9 : Sets the picture to 16:9 wide mode. ◆ Panorama : Use this mode for the wide aspect ratio of a panoramic picture. ◆ Zoom1 : The screen size when wide screen is vertically enlarged. ◆ Zoom2 : The screen size when the Zoom1 screen is vertically enlarged. ◆ 14:9 : Magnify the size of the picture more than 4:3. ◆ 4:3 : Sets the picture to 4:3 normal mode. 6 Press the ENTER ( ) button. ➢ ◆ You can select these options simply by pressing the P.SIZE button on the remote control. ◆ If you change the picture size In PIP mode, PIP disappears automatically. ◆ Depending on the input source, the P.SIZE options may vary. ◆ Check if the Video Wall (refer to page 33) is On if the Picture size is not function. Picture size does not function when the Video Wall is set to On. Change the setting to Off and try it again. Positioning and Sizing the screen using Zoom ➢ ◆ Resizing the screen using the Zoom enables the positioning and sizing of the screen to up/down direction using the … or † button as well as the screen size. ◆ Move the screen up/down using the … or † button after selecting the by pressing the œ or √ button. ◆ Screen enlargement operates only in AV/S-Video/Component input modes. ◆ In PC or DVI mode, you can select either 16:9 or 4:3. Y re P Selecting the Picture Size English - 23 Mode : Dynamic Custom Color Tone : Normal Color Control Film Mode : Off Size : 16:9 PIP Picture Move Enter Return TV 16:9 Panorama Zoom1 Zoom2 14:9 4:3 Size Adjust Enter Return TV 16:9 Panorama Zoom1 Zoom2 14:9 4:3 Size Adjust Enter Return TV PC to DVI Mode BN68-00848A-00Eng_0404 4/4/05 3:59 PM Page 23You can freeze the picture when watching a moving picture simply by pressing the “STILL” button. To return to normal viewing, press it again. ➢ The Still function in PIP mode will be applied to the main picture and not to the sub picture. Freezing the Current Picture You can select the type of special sound effect to be used when watching a given broadcast. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the ▲ or ▼ button to select Sound. Result: The Sound menu is displayed. 3 Press the ENTER ( ) button. Result: The Mode is selected. 4 Press the ENTER ( ) button again. Select the required option by pressing the ▲ or ▼ button. Result: The following options are available. Standard - Music - Movie - Speech 5 Press the ENTER ( ) button. ➢ You can select these options by simply pressing the S.MODE (Sound Mode) button on the remote control. Changing the Sound Standard English - 24 Mode : Standard Pseudo Stereo : Off Sound Move Enter Return TV Mode : Standard Pseudo Stereo : Off Sound Move Enter Return TV Standard Music Movie Speech BN68-00848A-00Eng_0404 4/4/05 3:59 PM Page 24y Extra Sound Settings English - 25 Mode : Standard Pseudo Stereo : Off Sound Move Enter Return TV Mode : Standard Pseudo Stereo: Off Sound Move Enter Return TV Off On ◆ Pseudo Stereo Pseudo Stereo feature converts a monaural sound signal into two identical left and right channels. Once the Pseudo Stereo is set to On or Off, these settings apply to the sound effects such as Standard, Music, Movie, and Speech. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the ▲ or ▼ button to select Sound. Result: The Sound menu is displayed. 3 Press the ENTER ( ) button. 4 Press the ▲ or ▼ button to select Pseudo Stereo. Press the ENTER ( ) button. 5 Select Off or On by pressing the ▲ or ▼ button. Press the ENTER ( ) button. BN68-00848A-00Eng_0404 4/4/05 3:59 PM Page 25English - 26 Screen Burn Protection Safety Lock Multi Control Video Wall Fan : Off Function Move Enter Return TV Key Lock : Off IR Lock Change PIN Safety Lock Move Enter Return TV Key Lock : Off IR Lock Change PIN Safety Lock Move Enter Return TV Off On This feature allows you to lock the PDP Monitor panel buttons so that it cannot be operated via the PDP Monitor panel. It can, however, still be operated via the remote control. Only remote control can release the panel lock setting, so keep the remote control away from unauthorized users. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the ▲ or ▼ button to select Function. Result: The Function menu is displayed. 3 Press the ENTER ( ) button. 4 Press the ▲ or ▼ button to select Safety Lock. Press the ENTER ( ) button. 5 Press the ENTER ( ) button again to select Key Lock. 6 Select Off or On by pressing the ▲ or ▼ button. Press the ENTER ( ) button. T b o Activating Panel Button Lock BN68-00848A-00Eng_0404 4/4/05 3:59 PM Page 26English - 27 This feature allows you to lock the remote control so that it cannot be operated via the remote control. It can, however, still be operated via the PDP Monitor Panel buttons. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the ▲ or ▼ button to select Function. Result: The Function menu is displayed. 3 Press the ENTER ( ) button. 4 Press the ▲ or ▼ button to select Safety Lock. Press the ENTER ( ) button. 5 Press the ▲ or ▼ button to select IR Lock. Press the ENTER ( ) button. ➢ When IR Lock is set to On, you will not be able to use the remote control even if the remote control button is pressed. To cancel the Remote Control Button Lock, press “0000” using the numeric buttons on the remote control. Screen Burn Protection Safety Lock Multi Control Video Wall Fan : Off Function Move Enter Return TV IR Lock : On Activating Remote Control Button Lock Key Lock : Off IR Lock Change PIN Safety Lock Move Enter Return TV BN68-00848A-00Eng_0404 4/4/05 3:59 PM Page 27English - 28 Setting Up Your Personal ID Number This feature sets viewing restrictions and prevents unauthorized access to your PDP Monitor through the PIN (Personal Identification Number), which is a 4 digit number. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the ▲ or ▼ button to select Function. Result: The Function menu is displayed. 3 Press the ENTER ( ) button. 4 Press the ▲ or ▼ button to select Safety Lock. Press the ENTER ( ) button. 5 Press the ▲ or ▼ button to select Change PIN. Press the ENTER ( ) button. 6 Press the number buttons to enter your current 4-digit pin number. ➢ The default pin number for a new PDP Monitor set is “0000”. 7 Press the numeric buttons to enter your new 4-digit pin number. Re-enter your new pin number to confirm. ➢ If you forget the pin number, press the remote control buttons in the following sequence, which resets the pin to 0-0-0-0: POWER (Off), MUTE, 8, 2, 4, POWER (On). Screen Burn Protection Safety Lock Multi Control Video Wall Fan : Off Function Move Enter Return TV Change PIN Adjust Return TV Enter PIN Enter New PIN Change PIN Adjust Return TV Enter PIN Enter New PIN * * * * Key Lock : Off IR Lock Change PIN Safety Lock Move Enter Return TV T o BN68-00848A-00Eng_0404 4/4/05 3:59 PM Page 28English - 29 r. . Setting the MDC (Multiple Display Control) This function enables you to easily control the connected monitors on the PC by specifying IDs to connected monitors. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the ▲ or ▼ button to select Function. Result: The Function menu is displayed. 3 Press the ENTER ( ) button. 4 Press the ▲ or ▼ button to select Multi Control. 5 Press the ENTER ( ) button. Result: The Multi Control menu is displayed with the ID Setup selected. 6 Press the ENTER ( ) button again. Select the ID setup number by pressing the ▲ , ▼, or numeric buttons. Press the ENTER ( ) button. 7 Press the ▲ or ▼ button to select ID Input. Press the ENTER ( ) button. 8 Enter ID input number by using the numeric buttons. Press the ENTER ( ) button. ➢ To operate the multi control function, PDP1 and PDP2 should be set in the ID Setup mode. When entering the ID Input number of PDP1 while the PDP Monitor is set in the ID Input mode, only PDP1 is switched to the Menu screen and you can operate the remote control. At this time, PDP2 doesn't operate with the remote control and displays the standby mode of ID Input. ➢ For further details, refer to the MDC program guide. Screen Burn Protection Safety Lock Multi Control Video Wall Fan : Off Function Move Enter Return TV ID Setup : 00 ID Input : -- Multi Control Move Enter Return TV ID Setup : 00 ID Input : -- Multi Control Adjust Enter Return TV 00 ▲ ▲ ID Setup : 00 ID Input : -- Multi Control Enter ID Input Number TV BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 29English - 30 Preventing Screen Burn-in To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows you to program the time between movement of the picture in minutes. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the … or † button to select Function. Result: The Function menu is displayed. 3 Press the ENTER ( ) button. 4 Press the … or † button to select Screen Burn Protection. Press the ENTER ( ) button. Result: The Screen Burn Protection menu is displayed with the Pixel Shift selected. 5 Press the ENTER ( ) button again. Result: The Pixel Shift menu is selected. 6 Press the ENTER ( ) button. Select On by pressing the … or † button for making the screen move per regular hour and preventing the residual image. Press the ENTER ( ) button. ➢ Pixel Shift: Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to prevent after image on the screen. 7 Select the required option (Horizontal Dot, Vertical Line, or Time) by pressing the … or † button. Press the ENTER ( ) button. 8 Press the … or † button until you reach the optimal setting. Press the ENTER ( ) button. ➢ Optimum condition for pixel shift; Horizontal Dot Vertical Line Time PPM42M5S 2 4 4 min PPM42M5H 2 4 4 min PPM50/63M5H 4 4 4 min Screen Burn Protection Safety Lock Multi Control Video Wall Fan : Off Function Move Enter Return TV Pixel Shift Signal Pattern All White Timer Screen Burn Protection Move Enter Return TV Pixel Shift : On Horizontal Dot : 4 Vertical Line : 4 Time : 4 min Pixel Shift Move Enter Return TV Pixel Shift : Off Horizontal Dot : 4 Vertical Line : 4 Time : 4 min Pixel Shift Move Enter Return TV Off On If p BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 30English - 31 o Reducing the Effects of Screen Burn If screen burn has occurred, you can select a white screen or signal pattern (rolling screen) to help remove screen burn artifacts. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the … or † button to select Function. Result: The Function menu is displayed. 3 Press the ENTER ( ) button. 4 Press the … or † button to select Screen Burn Protection. Press the ENTER ( ) button. Result: The Screen Burn Protection menu is displayed with the Pixel Shift selected. 5 Press the … or † button to select the option (Signal Pattern or All White). Press the ENTER ( ) button. ➢ Signal Pattern: This function removes after images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the screen for a long time. ➢ All White: This function removes after images on the screen by changing the color of pixels to white. Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the screen for a long time. 6 Press the ENTER ( ) button. ➢ To remove after images on the screen, use either “All White” or “Signal Pattern” function. Although both of the two functions remove after images on the screen, “Signal Pattern” is more effective. ➢ The after image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after images on the screen. If after image is not removed after the execution of the function, repeat the function additionally. Pixel Shift Signal Pattern All White Timer Screen Burn Protection Move Enter Return TV Pixel Shift Signal Pattern All White Timer Screen Burn Protection Move Enter Return TV Screen Burn Protection Safety Lock Multi Control Video Wall Fan : Off Function Move Enter Return TV Pixel Shift Signal Pattern All White Timer Screen Burn Protection Move Enter Return TV BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 31English - 32 Setting the Screen Burn Protection Timer You can set the timer for Screen Burn Protection (hours, minutes). If you start the operation to erase any residual image, the operation will be performed for the set period of time and then automatically finish. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the … or † button to select Function. Result: The Function menu is displayed. 3 Press the ENTER ( ) button. 4 Press the … or † button to select Screen burn Protection. Press the ENTER ( ) button. 5 Press the … or † button to select Timer. Press the ENTER ( ) button. Result: The Timer menu is displayed. 6 Press the ENTER ( ) button again. 7 Select On by pressing the … or † button. Press the ENTER ( ) button. 8 Select the required option by pressing the … or † button. Result: The following options are available. ◆ Mode : Signal pattern, All White ◆ Period : Hour(1~24) ◆ Time : Minute(1~30) Pixel Shift Signal Pattern All White Timer Screen Burn Protection Move Enter Return TV Timer : Off Mode : Signal Pattern Period : 01 Hour Time : 05 min Timer Move Enter Return TV Off On Timer : On Mode : Signal Pattern Period : 01 Hr. Time : 05 min Timer Move Enter Return TV Timer : On Mode : Signal Pattern Period : 01 Hr. Time : 05 Min. Timer Move Enter Return TV 01 ▲ ▲ Timer : On Mode : Signal Pattern Period : 01 Hour Time : 05 Min. Timer Move Enter Return TV 05 ▲ ▲ Signal Pattern All White Y BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 32English - 33 n y Setting the Multiple Screen You can get various display effects with many PDPs. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the ▲ or ▼ button to select Function. Result: The Function menu is displayed. 3 Press the ENTER ( ) button. 4 Press the ▲ or ▼ button to select Video Wall. 5 Press the ENTER ( ) button. Result: The Video Wall menu is displayed with the Video Wall selected. 6 Press the ENTER ( ) button. Select On by pressing the ▲ or ▼ button. Press the ENTER ( ) button. 7 Press the ▲ or ▼ button to select Format. Press the ENTER ( ) button. 8 Select the required option by pressing the ▲ or ▼ button. Result: The following options are available. ➢ ◆ Full : This option displays divided images on multiple monitors without missing parts as if only the viewable part of the separate monitors were simply part of a large single monitor. ◆ Natural : This option displays divided images on multiple monitors as if the separate monitors were simply part of a large single monitor. Therefore there are missing parts on the edge of the monitors. Press the ENTER ( ) button. 9 Press the ▲ or ▼ button to select Screen Divider. Press the ENTER ( ) button. 10 Select the option (2x2, 3x3, 4x4, 1x5, or 5x1) by pressing the ▲ or ▼ button. Press the ENTER ( ) button. 11 Press the œ or √ button to select the position of the screens. 12 Press the MENU ( ) button. ➢ The PIP function and Picture Size do not work during the Video Wall operation. Y Screen Burn Protection Safety Lock Multi Control Video Wall Fan : Off Function Move Enter Return TV Video Wall : Off Format : Full Screen Divider Video Wall Move Enter Return TV Video Wall : Off Format : Full Screen Divider Video Wall Move Enter Return TV Off On Video Wall : On Format : Full Screen Divider Video Wall Move Enter Return TV 2x2 3x3 4x4 1x5 5x1 Screen Divider Move Enter Return TV Full Natural BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 33English - 34 Displaying the Setting Information You can view the setting status you select by pressing the “INFO” button on the remote control. Setting and Displaying the Current Time You can set the PDP Monitor’s clock so that the current time is displayed by pressing the “INFO ( )” button. You must also set the time if you wish to use the automatic on or off timers. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the … or † button to select Setup. Result: The Setup menu is displayed. 3 Press the ENTER ( ) button. 4 Press the … or † button to select Time. Press the ENTER ( ) button. Result: The Clock set is selected. 5 Press the ENTER ( ) button again. 6 Press the œ or √ button to select Hour or min. Set these by pressing the … or † button. 7 Press the MENU ( ) button. AV Stereo Picture : Dynamic Sound : Standard Pseudo Stereo : Off -- : -- Clock Set -- : -- On Timer -- : -- Inactivated Off Timer -- : -- Inactivated Time Move Enter Return TV Clock Set Move Adjust Return TV Time Language : English PC Setup Move Enter Return TV Hour min 12 00 Y BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 34English - 35 Switching the PDP Monitor On and Off Automatically You can set the on or off timers so that the PDP Monitor will: ◆ Switch on automatically and tune source of your choice at the time you select. ◆ Switch off automatically at the time you select. ➢ The first step is to set the PDP Monitor’s clock (refer to “Setting and Displaying the Current Time” on page 34). 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the … or † button to select Setup. Result: The Setup menu is displayed. 3 Press the ENTER ( ) button. 4 Press the … or † button to select Time. Press the ENTER ( ) button. Result: The Time menu is displayed. 5 Press the … or † button to select On Timer. Press the ENTER ( ) button. Result: The On Timer menu is displayed. 6 Select Hour, min, Activation, Volume, or Source by pressing the œ or √ button. Set these by pressing the … or † button. 7 To activate On Timer with the setting entered, select Yes by pressing the … or † button. 8 Press the MENU ( ) button. Result: The Time menu is displayed again. Time Language : English PC Setup Move Enter Return TV Clock Set 07 : 05 On Timer -- : -- Inactivated Off Timer -- : -- Inactivated Time Move Enter Return TV On Timer Move Adjust Return TV Hour min Activation 06 00 No Volume Source 10 AV On Timer Move Adjust Return TV Hour min Activation 06 00 Yes Volume Source 10 AV BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 35English - 36 Switching the PDP Monitor On and Off Automatically (continued) 9 Press the … or † button to select Off Timer. Press the ENTER ( ) button. Result: The Off Timer menu is displayed. 10 Select Hour or min by pressing the œ or √ button. Set these by pressing the … or † button. 11 Press the œ or √ button to select Activation. 12 To activate Off Timer with the setting entered, select Yes by pressing the … or † button. 13 Press the MENU ( ) button. ➢ Auto Power Off When you set the timer “On”, the PDP Monitor will eventually turn off, if no controls are operated for 3 hours after the PDP Monitor was turned on by timer. This function is only available in timer “On” mode and prevents overheating or leakages, which may occur if a PDP Monitor is on for too long (when you are on vacation, for example). n Off Timer Move Adjust Return TV Hour min Activation 07 00 No Off Timer Move Adjust Return TV Hour min Activation 07 00 Yes Clock Set 12 : 00 On Timer 06 : 00 Activated Off Timer 00 : 00 Inactivated Time Move Enter Return TV Fa th fa T in w BN68-00848A-00Eng_0404 4/4/05 6:23 PM Page 36English - 37 n Selecting the Fan Fans inside the PDP Monitor are used to lower the temperature of the tops and the front of the PDP Monitor. To reduce the noise of the fan, you may stop the fan by setting the Fan to “Off”. The temperature of the top and the front of the PDP Monitor may increase when you watch the PDP Monitor for a long period of time while the fan is stopped, but the PDP Monitor will operate normally. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the ▲ or ▼ button to select Function. Result: The Function menu is displayed. 3 Press the ENTER ( ) button. 4 Press the ▲ or ▼ button to select Fan. Press the ENTER ( ) button. 5 Select Off or On by pressing the ▲ or ▼ button. Press the ENTER ( ) button. ➢ ◆ If your PDP Monitor is displayed vertically, the fan automatically works. ◆ The message Check Fan is displayed if there is a fan problem. ◆ Please use the fan when the temperature is over 35 degrees. ◆ The Fan function for the models PPM-42M5SS, PPM42M5SS, PPM-42M5SB and PPM42M5SB is not available. Screen Burn Protection Safety Lock Multi Control Video Wall Fan : Off Function Move Enter Return TV Screen Burn Protection Safety Lock Multi Control Video Wall Fan : Off Function Move Enter Return TV Off On BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 37English - 38 Setting the Film Mode When a video input source is from a film such as movies, this feature identifies the source and changes to the corresponding screen. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the ▲ or ▼ button to select Picture. Result: The Picture menu is displayed. 3 Press the ENTER ( ) button. 4 Press the ▲ or ▼ button to select Film Mode. Press the ENTER ( ) button. 5 Select Off or On by pressing the ▲ or ▼ button. Press the ENTER ( ) button. ➢ ◆ Automatically senses and processes film signals from all sources and adjusts the picture for optimum quality. ◆ Available in AV, S-Video, and Component (480i) modes. ◆ Unavailable in PC1, PC2, DVI mode. Mode : Dynamic Custom Color Tone : Normal Color Control Film Mode : Off Size : 16:9 PIP Picture Move Enter Return TV Mode : Dynamic Custom Color Tone : Normal Color Control Film Mode : Off Size : 16:9 PIP Picture Move Enter Return TV Off On Y de de BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 38English - 39 e ll Viewing the Picture in Picture (PIP) You can display a sub picture within the main picture of external A/V devices. In this way you can monitor the video input from any connected devices while monitoring other video inputs. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the … or † button to select Picture. Result: The Picture menu is displayed. 3 Press the ENTER ( ) button. 4 Press the … or † button to select PIP. Press the ENTER ( ) button. Result: The PIP is selected. 5 Press the ENTER ( ) button again. To activate, set PIP to On by pressing the … or † button. Press the ENTER ( ) button. 6 Press the … or † button to select Source. Press the ENTER ( ) button. Result: The following options are available. AV - S-Video - Component - PC1 - PC2 - DVI 7 Select a source of the sub picture by pressing the … or † button. Press the ENTER ( ) button. 8 Press the … or † button to select Swap. Press the ENTER ( ) button. Result: The main picture and sub picture are interchanged. 9 Press the … or † button to select Size. Press the ENTER ( ) button. Result: The following options are available. (Large) -(Small) -(Double Window) -(Double Wide) 10 Select a size of the sub picture by pressing the … or † button. Press the ENTER ( ) button. Mode : Dynamic Custom Color Tone : Normal Color Control Film Mode : Off Size : 16:9 PIP Picture Move Enter Return TV PIP : Off Source : PC1 Swap Size : Position : Sound Select : Main PIP Sou Sw Siz Pos Sou PIP Move Enter Return TV Off On PIP : Off Source : PC1 Swap Size : Position : Sound Select : Main PIP Move Enter Return TV AV S-Video Component PC1 PC2 DVI PIP : On Source : PC1 Swap Size : Position : Sound Select : Main PIP Move Enter Return TV PIP : On Source : PC1 Swap Size : Position : Sound Select : Main PIP Move Enter Return TV BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 39English - 40 Viewing the Picture in Picture (PIP) (continued) 11 Press the … or † button to select Position. Press the ENTER ( ) button. Result: The following options are available. - - - ➢ The Position menu is available when the Size is large ( ) mode and small ( ) mode. 12 Select a position of the sub picture by pressing the … or † button. Press the ENTER ( ) button. ➢ Check if the Video Wall (refer to page 33) is On if the PIP On/Off does not function. PIP does not function when the Video Wall is set to On. Change the setting to Off and try it again. Easy functions of the remote control. Buttons Feature PIP Used to activate or deactivate the PIP function directly. SWAP Used to interchange the main picture and the sub picture. SIZE Used to select a size of the sub picture ( (Large), (Small), (Double Window), or (Double Wide)). SOURCE Used to assign a source of the sub picture (AV, S-Video, Component, PC1, PC2, or DVI). X - This PIP combination is not available. O - This PIP combination is available. Sub Main Table of PIP Settings AV S-Video Component PC1 PC2(BNC) DVI AV X X X O O X S-Video X X X O O X Component X X X O O X PC1 O O O X X O PC2(BNC) O O O X X O DVI X X X O O X PIP : On Source : PC1 Swap Size : Position : Sound Select : Main PIP Move Enter Return TV W th BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 40English - 41 . . Listening to the Sound of the Sub Picture While the PIP feature is activating, you can listen to the sound of the sub picture. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the … or † button to select Picture. Result: The Picture menu is displayed. 3 Press the ENTER ( ) button. 4 Press the … or † button to select PIP. Press the ENTER ( ) button. Result: The PIP is selected. 5 Press the ENTER ( ) button. To activate, set PIP to On by pressing the … or † button. Press the ENTER ( ) button. 6 Press the … or † button to select Sound Select. Press the ENTER ( ) button. Result: You can listen to the sound of the sub picture. ➢ To listen the sound of the current main picture, set to Main. 7 Set to sub by pressing the … or † button. Press the ENTER ( ) button. PIP : On Source : PC1 Swap Size : Position : Sound Select : Main PIP Move Enter Return TV Main Sub Mode : Dynamic Custom Color Tone : Normal Color Control Film Mode : Off Size : 16:9 PIP Picture Move Enter Return TV PIP : Off Source : PC1 Swap Size : Position : Sound Select : Main PIP Move Enter Return TV Off On BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 41English - 42 Viewing an External Signal Source Once you have connected up your various audio and video systems, you can view different sources by selecting the appropriate input. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the … or † button to select Input. Result: The Input menu is displayed. 3 Press the ENTER ( ) button. Result: The Source List is selected. 4 Press the ENTER ( ) button again. 5 Press the … or † button to select the signal source, press the ENTER ( ) button. Result: The available signal sources are listed. ➢ ◆ AV, S-Video, Component, PC1, PC2, or DVI ◆ You can also set these options simply by pressing the SOURCE ( ) button on the remote control. 6 Repeat steps 1 to 3. Result: The Input menu is displayed again. 7 Press the … or † button to select Edit Name. Press the ENTER ( ) button. 8 Press the … or † button to select external source to be edited. Press the ENTER ( ) button. Result: The available device names are listed. VCR, DVD, Cable STB, HD STB, Satellite STB, AV Receiver, DVD Receiver, Game, Camcorder, DVD Combo, DHR (DVD HDD Recorder), or PC 9 Select the required device by pressing the … or † button. Press the ENTER ( ) button. ➢ If you change the external source while viewing, it might take a short period of time for picture to be switched. Source List : AV Edit Name Input Move Enter Return TV AV : ---- S-Video : ---- Component : ---- PC1 : ---- PC2 : ---- DVI : ---- Source List Move Enter Return TV Source List : AV Edit Name Input Move Enter Return TV AV : ---- S-Video : ---- Component : ---- PC1 : ---- PC2 : ---- DVI : ---- Edit Name Move Enter Return TV ---- VCR DVD Cable STB HD STB Satellite STB AV Receiver ☛ BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 42English - 43 Connecting to the Audio/Video Input The "AV IN" connectors are used for the equipment with an Composite Video output, such as video game devices or video disc players. Rear of the PDP Monitor (Input) VCR Decoder / Video game device Video disc player Satellite receiver DVD ① ② Camcorder Rear of the PDP Monitor (Output) The "AV OUT" connectors are used for the equipment with an Composite Video input, such as a camcorder or VCR. ① If you have a second VCR and wish to copy cassettes tape, connect the source VCR to “AV IN” and the target VCR to “AV OUT” so that you can redirect the signal from “AV IN” to “AV OUT”. ② When you wish to record a programme, connect the receiver to “AV IN” and the VCR to “AV OUT” so that you can redirect the signal from “AV IN” to “AV OUT”. ➢ Signal is outputted through the AV OUT only when the signal source is AV. ☛ Whenever you connect an audio or video system to your PDP Monitor, ensure that all elements are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions. BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 43English - 44 Connecting to the S-Video Input The S-VIDEO and RCA (AUDIO-L/R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Rear of the PDP Monitor Camcorder VCR ① To play picture and sound, both the S-VIDEO and RCA connectors must be used. and ① Connecting to the Component Input The COMPONENT IN connectors are used for DTV receiver or DVD. (480i,p/576i,p/720p/1080i) DVD DTV Receiver Rear of the PDP Monitor BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 44English - 45 Connecting to the DVD/DTV Receiver Input Y / PB / PR L / R The “COMPONENT IN” (or “Y/PB/PR” (video) and “AUDIO”) connectors are used for equipment with a DVD/ DTV Receiver output. (480i, 576i, 480p, 576p, 720p, 1080i) Digital Set-Top Box DVD Rear of the PDP Monitor BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 45English - 46 Connecting to the DVI Input Connecting to the PC Input The “DVI IN” (video) and “AUDIO” connectors are used for equipment with a DVI output. Personal Computer Personal Computer and Rear of the PDP Monitor The “PC 1” (or “PC 2 (BNC) IN”) and “AUDIO” connectors are used for interfacing with your PC. Rear of the PDP Monitor or Only when watching TV in PC1 mode, you can use the RGB OUT port to connect the current screen to another PDP in the same mode. T P v in BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 46English - 47 Setting up Your PC Software (Windows only) The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1 Right click the mouse on the Windows Desktop, then click on Properties. The Display Properties will be displayed. 2 Click on Settings tab, then set the Display Mode with reference to the Display Modes Table. You do not need to change the Colours settings. 3 Click on Advanced. A new settings dialog box will be displayed. 4 Click on the Monitor tab, then set the Screen refresh rate with reference to the Display Modes Table. Set the Vertical Frequency and Horizontal Frequency individually if you can do so instead of setting the Screen refresh rate. 5 Click on OK to close the window, then Click on OK button to the Display Properties window. Automatic re-booting may commence at this moment. 6 Shutdown the PC, and connect it to your PDP Monitor. (“Connecting to the PC Input” on page 46) ➢ ◆ The actual screens on your PC may look different, depending on your particular version of Windows and the type of your PC. ◆ When you use your PDP Monitor as a PC monitor, it supports Colours up to 32 bits. ◆ In this case, the display on the PDP Monitor may look different depending on your particular version of Windows or the PC manufacturer. ◆ When connecting a PC (including the DVI connection), you must set it to the display settings that are supported by the PDP Monitor. Otherwise, the message Out of input range will be displayed. 2 3 4 5 BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 47English - 48 Input Mode (PC/DVI) Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: ◆ “❉” mode does not work with DVI mode. ◆ The interlace mode is not supported. ◆ The PDP might operate abnormally if a non-standard video format is selected. ◆ The 1366 x 768 / 852 x 480 mode is only supported by a particular video card (PIXEL PERFECT made by IMAGINE GRAPHICS Ltd.). ◆ In 1360 x 768 resolution, the screen displays 1360 pixels horizontally. ◆ A “✔” mark means that this mode can be supported. ◆ A “ ” mark means that this mode is recommended. VGA SVGA XGA WVGA ❉SXGA WXGA ❉UXGA 70 85 85 70 85 60 72 75 85 56 60 72 75 85 60 70 75 ❉85 60 72 75 ❉85 60 75 60 75 60 75 60 60 60 31.5 37.9 37.9 31.5 37.9 31.5 37.9 37.5 43.3 35.2 37.9 48.1 46.9 53.7 48.4 56.5 60.0 68.7 29.8 35.1 36.0 37.0 31.8 67.5 64.0 80.0 47.7 60.1 47.8 48.2 75.0 ✔ ✔ ✔ ✔ ✔ ✔/ ✔ ✔ ✔ ✔ ✔/ ✔ ✔ ✔ ✔ ✔ ✔/ ✔ ✔/ ✔ ✔ ✔ ✔ ✔/ ✔ ✔ ✔/ ✔/ ✔/ ✔ ✔ ✔ ✔ ✔ ✔ ✔/ ✔ ✔ ✔ ✔ ✔/ ✔ ✔ ✔ ✔ ✔ ✔/ ✔ ✔/ ✔ ✔ ✔ ✔ ✔/ ✔ ✔ ✔/ ✔/ ✔/ ✔ Resolution 640 x 350 640 x 400 720 x 400 640 x 480 800 x 600 1024 x 768 848 x 480 ❉852 x 480 ❉1152 x 864 1280 x 1024 ❉1280 x 768 1360 x 768 ❉1366 x 768 1600 x 1200 ✔ ✔ ✔ ✔ ✔ ✔/ ✔ ✔ ✔ ✔ ✔/ ✔ ✔ ✔ ✔/ ✔ ✔ ✔ ✔/ ✔ ✔ ✔ ✔/ ✔ ✔ ✔ Horizontal frequency (kHz) Vertical frequency (Hz) PPM42M5S/ PPM42M5H PPM50M5H PPM63M5H T sy ce Se ◆ ◆ ◆ ◆ BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 48English - 49 Power Saver (PC1 mode only) This monitor has a built-in power management system called Power Saver. This power management system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. You use a software utility installed on your computer to set up this feature. See the table below for details. State Horizontal Sync Vertical Sync Video Power Indicator Normal Operation Active Active Active Green On Suspend Mode Position A1 Active Inactive Blanked Green Blinking (3 sec Interval) Power-off Mode Position A2 Inactive Inactive Blanked Green Blinking (3 sec Interval) Power-saving Function Mode ◆ If the horizontal sync is inactive and the vertical sync active, this monitor goes to the screen mute state. ◆ This monitor automatically returns to normal operation when horizontal and vertical sync return. ◆ This occurs when moving the computer’s mouse or pressing a key on the keyboard. ◆ For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 49English - 50 Troubleshooting: Before Contacting Service Personnel Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the PDP Monitor and contact your local dealer. No sound or picture Normal picture but no sound No picture or black and white picture Sound and picture interference Remote control malfunctions Screen is black and power indicator light blinks steadily. ◆ Check that the mains lead has been connected to a wall socket. ◆ Check that you have pressed the ON or OFF button on the remote control. ◆ Check the picture contrast and brightness settings. ◆ Check the volume. ◆ Check the volume. ◆ Check whether the volume MUTE button on the remote control has been pressed. ◆ Adjust the color settings. ◆ Check that the video system selected is correct. ◆ Plug your PDP Monitor into a different mains socket. ◆ Replace the remote control batteries. ◆ Clean the upper edge of the remote control (transmission window). ◆ Check the battery terminals. ◆ On your computer check: Power, Signal Cable. The TV is using its power management system. Move the computer's mouse or press any key on the keyboard. Ex p T ca D ( W ( S S N ( C S A P P V M A A E BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 50English - 51 Technical Specifications Exterior design and product specifications are subject to change without prior notice to improve the performance of this product. This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. (Class A product only) Dimensions PPM42M5S/PPM42M5H -1027 x 79 x 630.5 mm ; 40.43 x 3.11 x 24.82 inches (W x D x H) PPM50M5H -1204.6 x 79 x 724 mm ; 47.43 x 3.11 x 28.5 inches PPM63M5H -1503.4 x 89 x 893.8 mm ; 59.19 x 3.5 x 35.19 inches Weight PPM42M5S/PPM42M5H -31kg (Without stand) PPM50M5H -43kg PPM63M5H -69kg Screen aspect ratio 16:9 Screen size PPM42M5S/PPM42M5H -42 inch PPM50M5H -50 inch PPM63M5H -63 inch Native pixel resolution PPM42M5S -852 x 480 (H x V) PPM42M5H -1024 x 768 PPM50M5H/PPM63M5H -1366 x 768 Color systems PAL, SECAM, NTSC (NT3.58/NT4.43) Sound Stereo, Virtual Dolby Audio output power 10W + 10W (8Ω) Power supply U.S.A/Canada -AC120V~, 60Hz Other countries -AC100-250V~, 50/60Hz Power consumption PPM42M5S -330 Watts PPM42M5H -380 Watts PPM50M5H -490 Watts PPM63M5H -630 Watts Video inputs VIDEO IN -AV/S-VIDEO COMPONENT IN -Y/PB/PR (RCA, 3P, 480i~1080i) RGB1(PC1) IN -D-SUB, 15P RGB2(PC2) IN VGA~XGA (R/G/B/H/V) DVI IN -DVI-D type Monitor outputs VIDEO OUT -VIDEO/L/R (RCA, 3P) Audio inputs VIDEO IN -L/R COMPONENT IN -L/R (RCA, 2P) AUDIO (Stereo jack for RGB1/2(PC1/2) and DVI input, 2 x mini jack) Audio outputs EXT SPEAKER (8Ω) - R+/-, L+/- External control RS232C -IN/OUT (D-SUB, 9P) BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 51English - 52 Dimension BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 52English - 53 Dimension (continued) BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 53Memo English - 54 BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 54Memo English - 55 BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 55ELECTRONICS BN68-00848A-00 - AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present. BN68-00848A-00Eng_0404 4/4/05 4:00 PM Page 56 LED TV MONITOR (MFM TV) user manual Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register TB300 TB350English 2 Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Digital LED display notice 1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal. 2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast transmission of digital LED display over cable. 3. Although this LED display set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed. 4. Depending on the countries/areas where this LED display set is used some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business. 5. Some Digital LED display functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers. 6. For more information, please contact your local Samsung customer care centre. ✎ The reception quality of LED display may be affected due to differences in broadcasting method between the countries. Please check the LED display performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconfiguring LED display setting or not. Still image warning Avoid displaying still images (like jpeg picture files) or still image element (like LED display programme logo, panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations: • Avoid displaying the same LED display channel for long periods. • Always try do display any image on full screen, use LED display set picture format menu for best possible match. • Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process. • Frequently use all LED display features designed to reduce image retention and screen burnout, refer to proper user manual section for details. Securing the Installation Space Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product. ✎ The actual appearance of the LED display may differ from the images in this manual, depending on the model. ✎ Be careful when you touch the LED display. Some parts can be somewhat hot. Installation with a stand. Installation with a wall-mount. • An administration fee may be charged if either – (a) an engineer is called out at your request and there is no defect in the product (i.e. where you have failed to read this user manual). – (b) you bring the unit to a repair centre and there is no defect in the product (i.e. where you have failed to read this user manual). • The amount of such administration charge will be advised to you before any work or home visit is carried out. 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm3 ENGLISH English Check the Symbol! This function can be used by pressing the t TOOLST button on the remote control. Note Indicates additional information. Contents Getting Started 4 4 Safety Precautions 11 Accessories 12 Viewing the Control Panel 13 Viewing the Remote Control Connections 14 14 Connecting to an Antenna 14 Setup (Initial Setup) 15 Connecting to an AV Device 16 Connecting to a COMMON INTERFACE slot 17 Connecting to a Audio device and PC 19 Changing the Input Source Basic Features 19 19 How to Navigate Menus 20 Using the INFO button (Now & Next guide) 20 Using the Channel Menu 22 Channel Menu 23 Picture Menu 25 Sound Menu 27 System Menu 30 Support Menu Advanced Features 31 31 Using the Media Play Other Information 38 38 Analogue Channel Teletext Feature 39 Attaching a Wall Mount/Desktop Stand 40 Anti-theft Kensington Lock 41 Troubleshooting 45 Specifications4 Getting Started English Safety Precautions Icons used for safety precautions WARNING Failing to follow the precautions marked with this sign may result in a serious injury or even a fatality. CAUTION Failing to follow the precautions marked with this sign may result in a personal injury or property damage. Do not perform. Must be followed. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product. ¦ Power Related ✎ The following images are for your reference and may differ depending on models and countries. Warning Avoid using a damaged power cord or plug or a loose power outlet. x Otherwise, it may result in electric shock or fire. Avoid connecting multiple electric appliances to a single wall outlet. x Otherwise, it may result in fire due to overheating of the wall outlet. Avoid plugging in or unplugging the power supply with wet hands. x Otherwise, it may result in electric shock. ! Plug the power plug in firmly. x Otherwise, it may result in fire. ! Make sure to connect the power cord to a grounded wall outlet (for insulation class 1 equipment only). x Otherwise, it may result in electric shock or injury. Avoid bending or twisting the power cord excessively and avoid placing heavy objects on the cord. x Otherwise, it may result in electric shock or fire due to a damaged power cord. Getting Started5 Getting Started English Keep the power cord and the product away from a heater. x Otherwise, it may result in electric shock or fire. ! If the pins of the power plug or the wall outlet are covered in dust, clean it using a dry cloth. x Otherwise, it may result in fire. Caution Avoid unplugging the power plug while the product is operating. x Otherwise, it may damage the product due to electric shock. ! Make sure to use only the power cord supplied by our company. In addition, do not use the power cord of another electric appliance. x Otherwise, it may result in electric shock or fire. ! When unplugging the power plug from the wall outlet, make sure to hold it by the plug and not by the cord. x Otherwise, it may result in electric shock or fire. ! Connect the power plug to a wall outlet that can be easily reached. x When a problem occurs with the product, you must unplug the power plug to cut the power off completely. You cannot cut the power off completely using only the power button on the product. ¦ Installation Related Warning Avoid placing burning candles, mosquitorepellentor cigarettes on the product. x Otherwise, it may result in fire. ! Ask an installation engineer or relevant company to install the product onto the wall. x Otherwise, it may result in injury. x Make sure to use the specified wall mount. Avoid installing the product in a badly-ventilated location such as inside a bookshelf or closet. x Otherwise, it may result in fire due to internal over-heating. ! Keep the plastic bags used to pack the product away from children. x If children place the plastic bags over their heads, they may suffocate. Avoid installing the product in a location that is unstable or exposed to excessive vibration such as on an unstable or slanted shelf. x The product may fall and this may result in damage to the product or injury. x If you use the product in a location exposed to excessive vibrations, it may result in a problem with the product or fire. ! Avoid installing the product in a location exposed to dust, moisture (sauna), oil, smoke or water (rain drops) and installing it within a vehicle. x This may result in electric shock or fire.6 Getting Started English Avoid installing the product in a location exposed to direct sunlight and installing the product near a heat source such as a fireplace or heater. x This may shorten the product life cycle or cause fire. Avoid installing the product where children may reach it. x If a child touches the product, the product may fall and this may result in injury. x Since the front part is heavier, install the product on a flat and stable surface. ! Bend the outdoor antenna cable downwards at the location where it comes in the house so that rainwater does not flow in. x If rainwater enters the product, it may result in electric shock or fire. ! Install the antenna far away from any high voltage cables. x If the antenna touches or falls onto a high voltage cable, it may result in electric shock or fire. Caution ! Do not let the product drop while moving it. x This may result in a problem with the product or injury. Do not place the product face down on the floor. x This may damage the panel of the product. When installing the product on a console or shelf, make sure that the front of the product does not protrude out of the console or shelf. x Otherwise, this may cause the product to fall off and result in a malfunction or injury. x Make sure to use a cabinet or shelf suitable to the size of the product. ! When putting the product down, handle it gently. x Otherwise, it may result in a problem with the product or injury. SAMSUNG ! If the product is installed in a location where the operating conditions vary considerably, a serious quality problem may occur due to the surrounding environment. In this case, install the product only after consulting one of our service engineers about the matter. x Places exposed to microscopic dust, chemicals, too high or low temperature, high humidity, airports or stations where the product is continuously used.7 Getting Started English ¦ Cleaning Related Warning ! Before cleaning the product, unplug the power cord. x Otherwise, it may result in electric shock or fire. When cleaning the product, do not spray water directly over the product parts. x Make sure that water does not enter the product. x Otherwise, it may result in fire, electric shock or a problem with the product. Caution Avoid spraying cleansing agent directly onto the product. x This may result in discoloration or cracking of the exterior of the product or the panel coming off. ! When cleaning the product, disconnect the power cord and clean the product with the supplied cleaning cloth. x Avoid using chemicals such as wax, benzene, alcohol, thinner, mosquitorepellent, fragrance, lubrication or cleansing agent when cleaning the product.  This may result in the exterior being deformed or the print being removed. ! If you can't get the product clean with just the supplied cloth, use a soft, damp cloth with a "monitorexclusive cleansing agent" and wipe the product with it. x If no monitor-exclusive cleansing agent is available, dilute a cleansing agent with water at a ratio of 1:10 before cleaning the product. ! Since the exterior of the product is easily scratched, be sure to use the supplied cleansing cloth. ¦ Usage Related Warning Since a high voltage runs through the product, never disassemble, repair or modify the product yourself. x Otherwise, it may result in fire or electric shock. x If the product needs to be fixed, contact a service centre. ! To move the product, turn the power off and unplug the power cord, the antenna cable and any other wires connected to the product. x Otherwise, it may result in electric shock or fire due to the damaged power cord.8 Getting Started English ! If the product generates a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact a service centre. x Otherwise, it may result in electric shock or fire. Avoid letting children hang or climb onto the product. x Otherwise, it may result in the product falling and this may result in injury or death. If you drop the product or the case is damaged, turn the power off and unplug the power cord. Contact a service centre. x Otherwise, it may result in fire or electric shock. Avoid placing objects such as toys and cookies on top of the product. x If a child hangs over the product to grab an object, the object or the product may fall and this may result in injury or even death. ! When thunder or lighting occurs, unplug the power cord and under no circumstance touch the antenna cable as this is dangerous. x Otherwise, it may result in electric shock or fire. ! Avoid dropping an object over the product or cause impact to the product. x Otherwise, it may result in electric shock or fire. Avoid moving the product by pulling the power cord or antenna cable. x Otherwise, it may result in electric shock, fire or a problem with the product due to damage to the cable. ! GAS When a gas leak occurs, do not touch the product or the power plug and ventilate immediately. x A spark may result in an explosion or fire. x During a thunder or lighting storm, do not touch the power cord or antenna cable. Avoid lifting up or moving the product by holding only the power cord or signal cable. x Otherwise, it may result in electric shock, fire or a problem with the product due to damage to the cable. ! Avoid using or placing inflammable spray or objects near the product. x This may result in an explosion or fire. Take care not to block the vent by a table cloth or curtain. x Otherwise, it may result in fire due to internal overheating. 100 Avoid inserting metal objects such as a chopsticks, coins or hairpins, or inflammable objects into the product (the vents, ports, etc). x If water or substances enters the product, turn the power off, unplug the power cord and contact a service centre. x Otherwise, it may result in a problem with the product, electric shock or fire.9 Getting Started English Avoid placing a liquid container such as a vase, flowerpot, beverage, cosmetics or drugs, or a metal object over the product. x If water or substances enter the product, turn the power off, unplug the power cord and contact a service centre. x Otherwise, it may result in a problem with the product, electric shock or fire. Do not press down hard on the product. The product may become deformed or damaged. Caution ! Displaying a still image for a long time may create a persistent image or stain on the screen. x If you do not use the product for a long time, use the power-saving mode or set the screensaver to the moving picture mode. -_- ! When not using the product for a long time such as leaving your home, unplug the power cord from the wall outlet. x Otherwise, it may cause dust accumulation and result in fire caused by overheating or short circuit or result in an electric shock. ! Set the appropriate resolution and frequency for the product. x Otherwise, it may result in eye strain. Avoid turning the product upside down or move the product holding only the stand. x This may cause the product to fall, resulting in damage to the product or injury. ! Watching the product from too close a distance continuously may damage your eyesight. Avoid using a humidifier or cooker near the product. x Otherwise, it may result in electric shock or fire. ! It is important to give your eyes some rest (5 minutes every hour) when viewing the product screen for long periods of time. x This will alleviate any eye strain. Since the display panel is hot after using it for a long time, do not touch the product.10 Getting Started English ! Keep the small accessories in a location out of the reach of children. ! Take care when adjusting the angle of the product or the height of the stand. x If your hand or finger is caught, you may be injured. x If the product is tilted excessively, the product may fall and this may result in injury. Avoid placing a heavy object over the product. x Otherwise, it may result in a problem with the product or injury. When using headphones or earphones, do not turn the volume too high. x Having the sound too loud may damage your hearing. Be careful that children do not place the batteries in their mouths when removed from the remote control. Place the battery in a location that children or infants cannot reach. x If children have had the battery in their mouths, consult your doctor immediately. ! When replacing the batteries, insert them with right polarity (+, -). x Otherwise, the battery may become damaged or it may cause fire, personal injury or damage due to leakage of the internal liquid. Use only specified standard batteries. Do not use new and used batteries together. x This may cause a battery to break or leak and may cause fire, injury, or contamination (damage). ! The batteries (and rechargeable batteries) are not ordinary refuse and must be returned for recycling purposes. The customer is responsible for returning the used or rechargeable batteries for recycling. x The customer can return used or rechargeable batteries to a nearby public recycling centre or to a store selling the same type of the battery or rechargeable battery.11 Getting Started English Accessories ✎Please make sure the following items are included with your LED display. If any items are missing, contact your dealer. ✎The items’ colours and shapes may vary depending on the models. ✎Cables not included in the package contents can be purchased separately. ✎Check that there is no accessory hidden behind packing materials when you open the box. [CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET x User Manual x Quick Setup Guide x Remote Control & Batteries (AAA x 2) x Cleaning Cloth x Warranty Card / Safety Guide (Not available in some locations) x Power Cord y Stand Connector y Stand Base y D-Sub Cable y Stereo Cable Input Cables (Sold Separately) y HDMI to DVI Cable y Audio Cable y Component Cable y Optical Cable y HDMI Cable12 Getting Started English Viewing the Control Panel ✎The product colour and shape may vary depending on the model. SOURCE E Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control. MENU Displays an on-screen menu, the OSD (on screen display) of your LED display's features. Y Adjusts the volume. In the OSD, use the Y buttons as you would use the l and r z buttons on the remote control. Changes the channels. In the OSD, use the z buttons as you would use the u and d buttons on the remote control. P (Power) Turns the LED display on or off. Power Indicator Blinks and turns off when the power is on and lights up in standby mode. Remote control sensor Aim the remote control towards this spot on the LED display. Standby mode Do not leave your LED display in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord. Control Panel13 Getting Started English Viewing the Remote Control ✎This is a special remote control for the visually impaired and has Braille points on the Channel and Number buttons. Installing batteries (Battery size: AAA) Turns the TV on and off. Have direct access to channels. Alternately select Teletext ON, Double, Mix or OFF. Displays the Content Home, which includes Channel List, Guide, Media Play, Schedule Manager, and Source. Quickly select frequently used functions. Displays the main on-screen menu. Returns to the previous menu. PIP: Turns the PIP on or off. P.SIZE: Selects the Picture Size. AD/SUBT.: Turns the audio description on and off (not available in some locations). / Displays digital subtitles. Move the cursor and select an item. Confirm the setting. Use these buttons according to the direction on screen. Adjusts the volume. Displays and selects the available video sources. Returns to the previous channel. Cuts off the sound temporarily. Displays channel lists on the screen. Displays the EPG (Electronic Programme Guide). Displays information on the TV screen. Exits the menu. Using these buttons in Media Play mode. Changes channels.English 14 Connections Connecting to an Antenna When the LED display is initially powered on, basic settings proceed automatically. ✎Preset: Connecting the mains and antenna. ANT OUT Power Input Setup (Initial Setup) When the LED display is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERP button. Setup is available only when the Input Source is set to TV. ✎Before turning on the LED display, make sure the antenna cable is connected. 1 Selecting a menu language Press the u or d button to select a menu language. Press ENTERE button 2 or Selecting Home Use Store Demo twice when done. Press the x Select the u or Home Use d button, then press the mode. Store Demo ENTER Mode is for retail environments. E button. P x To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the LED display. When you see the volume OSD, press and hold MENU for 5 sec. x Store Demo is only for shop display. If you select it, several functions are not able to use. Please select Home Use when you watch at home. 3 Selecting an area Press the ENTERE button. Select the appropriate area by pressing the u or d button. Press the ENTERE button to confirm your choice. 4 Auto Tuning Press the u or d button to select correct option, and then press ENTERE button twice. x I use an aerial cable. Memorise all of the available channels using RF cable. (Auto Tuning necessary) x I use a cable or satellite service. You don't need to use Auto Tuning to find channels. ✎ You can complete Setup by selecting it. x Air / Cable: Select the antenna source to memorise. Digital & Analogue / Digital / Analogue: Select the channel source to memorise. ✎ You can check more details on page22. 5 Setting the Clock Mode Set the Clock Mode automatically or manually. x Auto: Select the time zone (depending on the country) where you are located. x Manual: Allows you to manually set the current date and time. ✎ If the customer chooses "I use a cable or satellite service." in step 4, the clock just can be set manually. 6 Complete Press the ENTERE button. If You Want to Reset This Feature... Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to change the PIN number, use the Change PIN function. You should do Setup (MENU → System) again at home although you did in shop. ✎If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0”: POWER (off) → MUTE → 8 → 2 → 4 → POWER (on).English 15 Connections Connecting to an AV Device Using an HDMI or an HDMI to DVI cable (up to 1080p) Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, VCR ✎HDMI IN(DVI) / PC/DVI AUDIO IN x If an HDMI to DVI cable is connected to the HDMI IN(DVI) port, the audio does not work. x The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version of HDMI mode is connected to the LED display. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade. x Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur. x A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the ethernet function via HDMI. Using a Scart Cable Available devices: DVD, VCR ✎In Ext. mode, DTV Out supports MPEG SD Video and Audio only. DVI OUT HDMI OUT AUDIO OUT W R DVD / Blu-ray player DVD / Blu-ray player EXT (RGB) EXT VCR / DVDEnglish 16 Connections Using a Component (up to 1080p) or Audio/Video (480i only) Cable Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR PR PB COMPONENT / AV IN R W R AUDIO OUT R-AUDIO-L VIDEO OUT R W R B G R W R B G R W W W R B R R G Y Y AUDIO OUT R-AUDIO-L COMPONENT OUT PR PB Y R W Y ✎When connecting to AV IN, the colour of the AV IN [Y/VIDEO] jack (green) will not match the video cable (yellow). ✎For better picture quality, the Component connection is recommended over the A/V connection. Connecting to a COMMON INTERFACE slot (Just for Europe, Turkey,Algeria,South Africa, and CIS area) Using the “CI or CI+ CARD” To watch paid channels, the “CI or CI+ CARD” must be inserted. x If you don’t insert the “CI or CI+ CARD,” some channels will display the message “Scrambled Signal”. x The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. x When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated. ✎NOTE x You must obtain a “CI or CI+ CARD” from a local cable service provider. x When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it. x Insert the “CI or CI+ CARD” in the direction marked on the card. x The location of the COMMON INTERFACE slot may be different depending on the model. x “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. x If you have any problems, please contact a service provider. x Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen. Audio Cable (Not Supplied) Video Cable (Not Supplied) Audio Cable (Not Supplied) Red White Red Bule Green Red White Yellow Device Device Component Cable (Not Supplied)English 17 Connections Digital audio system Connecting to a Audio device and PC Using an Optical (Digital) or a Headphone Connection DIGITAL AUDIO OUT (OPTICAL) TB300 series have not headphone and Optical interface. ✎DIGITAL AUDIO OUT (OPTICAL) x When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the LED display and the system. x 5.1 CH (channel) audio is available when the LED display is connected to an external device supporting 5.1 CH. x When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre. ✎Headphones H: You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled. x Sound function may be restricted when connecting headphones to the LED display. x Headphone volume and LED display volume are adjusted separately. Using an HDMI cable or an HDMI to DVI cable or a D-sub cable ✎Connecting through the HDMI cable may not be supported depending on the PC. HDMI Cable (Not Supplied) HDMI to DVI (Not Supplied) Stereo Cable Stereo Cable D-Sub Cable English 18 Connections Display Modes (D-Sub and HDMI/DVI Input) Optimal resolution : 1366 x 768 pixels (T19B300 model only) Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity Mode Resolution (H/V) IBM 720 x 400 70Hz 31.469 70.087 28.322 -/+ VESA DMT 640 x 480 60Hz 31.469 59.940 25.175 -/- MAC 640 x 480 67Hz 35.000 66.667 30.240 -/- VESA DMT 640 x 480 72Hz 37.861 72.809 31.500 -/- VESA DMT 640 x 480 75Hz 37.500 75.000 31.500 -/- VESA DMT 800 x 600 60Hz 37.879 60.317 40.000 +/+ VESA DMT 800 x 600 72Hz 48.077 72.188 50.000 +/+ VESA DMT 800 x 600 75Hz 46.875 75.000 49.500 +/+ MAC 832 x 624 75Hz 49.726 74.551 57.284 -/- VESA DMT 1024 x 768 60Hz 48.363 60.004 65.000 -/- VESA DMT 1024 x 768 70Hz 56.476 70.069 75.000 -/- VESA DMT 1024 x 768 75Hz 60.023 75.029 78.750 +/+ VESA DMT 1280 x 720 60Hz 45.000 60.000 74.250 +/+ VESA DMT 1366 x 768 60Hz 47.712 59.790 85.500 +/+ Optimal resolution : 1920 x 1080 pixels Display Mode Horizontal Frequency (kHz) Vertical Frequency(Hz) Pixel Clock (MHz) Sync Polarity (H/V) Mode Resolution IBM 720 x 400 70Hz 31.469 70.087 28.322 -/+ VESA DMT 640 x 480 60Hz 31.469 59.940 25.175 -/- MAC 640 x 480 67Hz 35.000 66.667 30.240 -/- VESA DMT 640 x 480 72Hz 37.861 72.809 31.500 -/- VESA DMT 640 x 480 75Hz 37.500 75.000 31.500 -/- VESA DMT 800 x 600 60Hz 37.879 60.317 40.000 +/+ VESA DMT 800 x 600 72Hz 48.077 72.188 50.000 +/+ VESA DMT 800 x 600 75Hz 46.875 75.000 49.500 +/+ MAC 832 x 624 75Hz 49.726 74.551 57.284 -/- VESA DMT 1024 x 768 60Hz 48.363 60.004 65.000 -/- VESA DMT 1024 x 768 70Hz 56.476 70.069 75.000 -/- VESA DMT 1024 x 768 75Hz 60.023 75.029 78.750 +/+ VESA DMT 1152 x 864 75Hz 67.500 75.000 108.000 +/+ MAC 1152 x 870 75Hz 68.681 75.062 100.000 -/- VESA DMT 1280 x 720 60Hz 45.000 60.000 74.250 +/+ VESA DMT 1280 x 800 60Hz 49.702 59.810 83.500 -/+ VESA DMT 1280 x 1024 60Hz 63.981 60.020 108.000 +/+ VESA DMT 1280 x 1024 75Hz 79.976 75.025 135.000 +/+ VESA DMT 1366 x 768 60Hz 47.712 59.790 85.500 +/+ VESA DMT 1440 x 900 60Hz 55.935 59.887 106.500 -/+ VESA DMT 1600 x 900RB 60Hz 60.000 60.000 108.000 +/+ VESA DMT 1680 x 1050 60Hz 65.290 59.954 146.250 -/+ VESA DMT 1920 x 1080 60Hz 67.500 60.000 148.500 +/+ ✎NOTE x The interlace mode is not supported. x The set might operate abnormally if a non-standard video format is selected. x Separate and Composite modes are supported. SOG(Sync On Green) is not supported.English 19 Connections Basic Features How to Navigate Menus Before using the LED display, follow the steps below to learn how to navigate the menu and select and adjust different functions. 1 ENTERE / Direction button: Move the cursor and select an item. Confirm the setting. 2 RETURN button: Returns to the previous menu. 3 MENU button: Displays the main on-screen menu. 4 EXIT button: Exits the on-screen menu. How to Operate the OSD (On Screen Display) The access step may differ depending on the selected menu. 1 MENU m The main menu options appear on the screen: Picture, Sound, Channel, System, Support. 2 ▲ / ▼ Select an icon with the ▲ or ▼ button. 3 ENTERE Press ENTERE to access the sub-menu. 4 ▲ / ▼ Select the desired submenu with the ▲ or ▼ button. 5 ◄ / ► Adjust the value of an item with the ◄ or ► button. The adjustment in the OSD may differ depending on the selected menu. 6 ENTERE Press ENTERE to complete the configuration. 7 EXIT e Press EXIT. Changing the Input Source Source SOURCE s→ Source Use to select LED display or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver. ■ TV / Ext. / PC / HDMI/DVI / AV / Component ✎In the Source, connected inputs will be highlighted. ✎TV, PC and Ext. always stay activated. Edit Name SOURCEs→ TOOLST → Edit Name → ENTERE In the Source, press the TOOLST button, and then you can set an external input sources name you want. ■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier. ✎When connecting a PC to the HDMI IN (DVI) port with HDMI cable, you should set the LED display to PC mode under Edit Name. ✎When connecting a PC to the HDMI IN (DVI) port with HDMI to DVI cable, you should set the LED display to DVI PC mode under Edit Name. ✎When connecting an AV devices to the HDMI IN (DVI) port with HDMI to DVI cable, you should set the LED display to DVI Devices mode under Edit Name. Information SOURCEs→ TOOLST→ Information → ENTERE You can see detailed information about the selected external device. 2 4 3 1English 20 Basic Features Using the INFO button (Now & Next guide) The display identifies the current channel and the status of certain audio-video settings. The Now & Next guide shows daily LED display programme information for each channel according to the broadcasting time. x Scroll l / r to view information for a desired programme while watching the current channel. (Depending on the channels) x Scroll u / d to view information for other channels. If you want to move to the currently selected channel, press the ENTERE button. • The displayed image may differ depending on the model. No detailed information. No title 576i 4:3 SD Italian Stereo a Information 17.02 Tue 19 Jul DTV Air All Coming Soon 5 Using the Channel Menu Press the CONTENT button to select Contents Home, and then select the menu you want to use. Each screen will be displayed. • The displayed image may differ depending on the model. Contents Home Channel List Guide Media Play Schedule Manager Source R Return Guide CONTENT → Contents Home → Guide → ENTERE The EPG (Electronic Programme Guide) information is provided by broadcasters. Using programme schedules provided by broadcasters, you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time. Programme entries may appear blank or out of date depending on a channel status. Using Channel View x a Red (Sche. Mgr) : Displays the Schedule Manager. x b Green (-24 Hours): Viewing the list of programmes to be broadcasted before 24 hours. x { Yellow (+24 Hours): Viewing the list of programmes to be broadcasted after 24 hours. x } Blue (Ch. Mode): Select the type of channels you want to display on the Channel View window. x (Information): Displays details of the selected programme. x k (Page): Move to next or previous page. x E (Watch / Schedule) – When selecting the current programme, you can watch the selected programme. – When selecting the future programme, you can reserve to watch the selected programme. To cancel the schedule, press the ENTERE button again and select Cancel Schedule. Schedule Manager CONTENT → Contents Home → Schedule Manager → ENTERE You can view, modify or delete a channel you have reserved to watch. Using the Schedule Viewing You can set a desired channel to be displayed automatically at the intended time. Set the current time first to use this function. 1. Press the ENTERE button to select Schedule Manager. 2. Press the TOOLSTbutton or a button to add programme to schedule manually. The Schedule Viewing screen appears. 3. Press the u / d / l / r buttons to set the Aerial, Channel, Repeat, Date or Start Time. • The displayed image may differ depending on the model. IL MEDICO E LO STRGONE DTV Air 6 R4 DTT 16:55 - 17:55 IL MEDICO E LO STREGONE - 2 TEMPO a Sche. Mgr b -24 Hours { +24 Hours } Ch. Mode Information k Page E Watch Today 17:00 17:30 18:00 18:30 Guide 17:00 Tue 19 Jul Channel View - All No Information No Information No Information No Information IL MEDICO E LO STREGONE 1 1futech 2 24ore.tv 3 BBC World 4 Class News 5 Coming Soon 6 R4 DTT No Information TG 4 No Information 5 Coming SoonEnglish 21 Basic Features x Aerial: Select the desired antenna source. x Channel: Select the desired channel. x Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at your convenience. If you select Manual, you can set the day you want. ✎ The c mark indicates the date is selected. x Date: you can set desired date. ✎ It is available when you select Once in Repeat. x Start Time: You can set start time you want. ✎ On the Information screen, you can change or cancel a reserved information. x Cancel Schedule: Cancel a show you have reserved to watch. x Edit: Change a show you have reserved to watch. x Return: Return to the previous screen. Channel List CONTENT → Channel List → ENTERE You can view all the channel searched. • The displayed image may differ depending on the model. Channel List All 1 1futech 2 24ore.tv 3 BBC World 4 Class News 5 Coming Soon 6 R4 DTT IL MEDICO E LO STREGONE a1 C2 a2 C4 T Tools L Ch. Mode E Watch k Page ✎When you press the CH LIST button on the remote control, Channel List screen will be displayed at once. Using the operation buttons with the Channel List. ■ T (Tools): Press Tools button to check the following functions. x Programme View:Press the u/d buttons to select the desired programme, then press the ENTERE button. (Only for DIGITAL Channel) x Edit Favourites: Set channels you watch frequently as favourites. ✎ Select the Edit Favourites, then press the ENTERE button. – If the channel is already added to favourite channel, Edit Favourites will be shown. x Lock / Unlock: Lock a channel so that the channel cannot be selected and viewed. ✎ This function is available only when the Channel Lock is set to On. ✎ The PIN input screen appears. Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option. x Edit Channel Name (Only for Analogue channels): Assign your own channel name. ✎ This function may not support depending on the region. x Edit Channel Number: Edit the number by pressing the number buttons desired. ✎ This function may not support depending on the region. x Delete: You can delete a channel to display the channels you want. x Information: Display the channel name, resolution, picture mode, language and so on.(Some just available for DTV) x Sort: Change the list ordered by channel name or channel number. (Only for DIGITAL Channel) x Change antenna: Switches to Air or Cable. x Edit Mode: You can select desired channels and edit it. ■ l r (Ch. Mode): Move to the type of channels you want to display on the Channel List screen. ✎ The option may differ depending on country. ■ E (Watch / Information): Watches the channel you select. / Displays details of the selected programme. ■ k (Page): Move to next or previous page. How to use Schedule Viewing in Channel List (Depending on the channels) When you set the Schedule Viewing in Channel List, you can only set the programme in Programme View. 1. Press the CH LIST button, then select a desired digital channel. 2. Press the TOOLST button and select Programme View. 3. Press the u / d buttons to select the desired programme, then press the E (Information) button. 4. Select Schedule Viewing, then press the ENTERE button when done. ✎If you want to cancel Schedule Viewing, follow steps 1 through 3. Select Cancel Schedule.English 22 Basic Features Channel Menu ¦ Retuning Channels MENUm→ Channel → ENTERE Before your television can begin memorizing the available Aerial (Air / Cable)t channels, you must specify the type of signal source that is connected to the LED display. Country (depending on the country) The PIN input screen appears. Enter your 4 digit PIN number. ✎Select your country so that the LED display can correctly auto-tune the broadcasting channels. ■ Digital Channel: Change the country for digital channels. ■ Analogue Channel: Change the country for analogue channels. Auto Tuning (depending on the country) ✎Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the Channel Lock function, the PIN input window appears. ■ Auto Tuning – Air / Cable: Select the antenna source to memorise. Digital & Analogue / Digital / Analogue: Select the channel source to memorise. ✎ When selecting Cable → Digital & Analogue or Digital: Provide a value to scan for cable channels. x Search Mode(Full / Network / Quick): Selects the Search Mode settings among Full / Network / Quick. x Network (Auto / Manual): Selects the Network ID setting mode among Auto or Manual. x Network ID: When Network is Manual, you can set up Network ID using the numeric buttons. x Frequency: Displays the frequency for the channel. (differs in each country) x Modulation: Displays available modulation values. x Symbol Rate: Displays available symbol rates. ■ Cable Search Option (depending on the country) Sets additional search options such as the frequency and symbol rate for a cable network search. – Start Frequency / Stop Frequency: Set the start or stop frequency (differs in each country). – Symbol Rate: Displays available symbol rates. – Modulation: Displays available modulation values. Manual Tuning Scans for a channel manually and stores in the LED display. ✎If a channel is locked using the Channel Lock function, the PIN input window appears. ■ Digital Channel Tuning: Scans for a digital channel. 1. Press the ENTERE button to select New. ✎ When selecting Aerial → Air: Channel, Frequency, Bandwidth ✎ When selecting Aerial → Cable: Frequency, Modulation, Symbol Rate 2. Press the d button to select Search. When scanning has finnished, a channel is updated in the channel list. ■ Analogue Channel Tuning: Scans for a analogue channel. 1. Press the ENTERE button to select New. 2. Set the Programme, Colour System, Sound System, Channel and Search. 3. Press the d button to select Store. When scanning has finnished, a channel is updated in the channel list. Transfer Channel List The PIN input screen appears. Enter your 4 digit PIN number. Imports or exports the channel map. You should connect a USB storage to use this function. ■ Import from USB: Import channel list from USB. ■ Export to USB: Export channel list to USB. This function is available when USB is connected. ✎USB format should be FAT32. Fine Tune (analogue channels only) If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear. ✎Settings are applied to the channel you’re currently watching. ✎Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner ✎To reset the fine-tuning, select Reset.English 23 Basic Features Picture Menu ¦ Changing the Preset Picture Mode MENUm→ Picture → Picture Mode → ENTERE Select your preferred picture type. Picture Mode t ✎When connecting a PC, the Picture Mode is only available the Standard and Entertain. ■ Dynamic: Suitable for a bright room. ■ Standard: Suitable for a normal environment. ■ Movie: Suitable for watching movies in a dark room. ■ Entertain: Suitable for watching movies and games. ✎ It is only available when connecting a PC. ¦ Adjusting Picture Settings MENUm→ Picture → ENTERE Samsung MagicAngle Adjust screen viewing Angle to optimize screen quality according to your viewing position. ■ Samsung MagicAngle: When viewing the screen at an angle from below or above by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front. x Off: Select when viewing from the front position. x Lean back mode: Select when viewing from a slightly lower position. x Standing Mode: Select when viewing from the upper position. ■ Mode: Adjust screen viewing angle. ✎When Samsung MagicAngle is set to Lean back mode or Standing Mode, Gamma is not available. Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R) Your television has several setting options for picture quality control. ✎NOTE x In analogue TV, PC, AV modes of the PAL system, the Tint (G/R) function is not available. x When connecting a PC, you can only make changes to Backlight, Contrast, Brightness and Sharpness. x Settings can be adjusted and stored for each external device connected to the LED display. x Lowering picture brightness reduces power consumption. Screen Adjustment ■ Picture Size: Your cable box / satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time. Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio. 16:9: Sets the picture to 16:9 wide mode. Wide Zoom: Magnifies the picture size more than 4:3. ✎ Adjusts the Position by using u / d buttons. Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size. ✎ Adjusts the Zoom or Position by using u / d button. 4:3: Sets the picture to basic (4:3) mode. ✎ Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention (screen burn) which are not covered by the warranty. Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (720p / 1080i / 1080p) signals are inputted. ✎ Adjusts the Position by using u / d / l / r button. ✎NOTE x Depending on the input source, the picture size options may vary. x The available items may differ depending on the selected mode. x When connecting a PC, only 16:9 and 4:3 modes can be adjusted. x Settings can be adjusted and stored for each external device connected to an input on the LED display. x If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function. ■ Zoom / Position:You can adjust picture size and position by u / d / l / r button. ✎ It's only available when picture size is set as Zoom and Wide Zoom. ✎ In Wide Zoom mode, you can only use Position adjustment. ✎ Reset: Reset the Zoom and Position to the default settings. ■ 4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size. ✎ Not available in HDMI , Component, and HDMI/DVI mode.English 24 Basic Features ■ PC Screen Adjustment ✎ Available only PC mode. x Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust the picture so that it is aligned to the centre of screen. x Position: Adjusts the PC screen position with direction button (u / d / l / r). x Image Reset: Resets the image to default settings. Frequency values / position and fine tune are adjusted Auto Adjustmentt automatically. ✎It's only available in PC mode. Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card, the actual screens on your PC may differ in which case the same basic set-up information will almost always be applied. (If not, contact your computer manufacturer or Samsung Dealer.) 1. Click on “Control Panel” on the Windows start menu. 2. Click on “Appearance and Themes” in the “Control Panel” window and a display dialog-box will appear. 3. Click on “Display” and a display dialog box will appear. 4. Navigate to the “Settings” tab on the display dialog-box. x The correct size setting (resolution) [Optimum: 1920 x 1080 pixels]. (T19B300: 1366 x 768 pixels) x If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box. Maintaining the Correct Posture when Using this Product Maintain the correct posture when using this product. x Straighten your back. x Keep a distance of 45~50 cm (15~19 inches) from your eyes to the screen. Look down at the screen and face the screen forwards. x Adjust the angle of the product so that light is not reflected onto the screen. x Keep your elbow at a right angle and keep your arm level with the back of your hand. x Keep your elbow at a right angle. x Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or higher and maintain the position of your arm so that your arm is below your heart. ¦ Changing the Picture Options Advanced Settings MENUm→ Picture → Advanced Settings → ENTERE (Advanced Settings are available in Standard / Movie mode) Compared to previous models, new Samsung LED display have a more precise picture. ✎When connecting a PC, you can only make changes to White Balance. Advanced Settings RGB Only Mode Off Colour Space Native White Balance Gamma 0 Dynamic Contrast High Black Tone Off Flesh Tone 0 ■ Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast. ■ Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth. ■ Flesh Tone: Emphasize pink “Flesh Tone.” ■ RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and Blue colour for making fine adjustments to the hue and saturation. ■ Colour Space (Auto / Native): Adjust the range of colours available to create the image. ■ White Balance: Adjust the colour temperature for a more natural picture. R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) darkness. R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness. Reset: Resets the White Balance to it’s default settings. ■ Gamma: Adjust the primary colour intensity. ■ Motion Lighting (Off / On): Reduce power consumption by brightness control.English 25 Basic Features Picture Options MENUm→ Picture → Picture Options → ENTERE ✎When connecting a PC, you can only make changes to the Colour Tone. Picture Options Colour Tone Standard Digital Noise Filter Auto MPEG Noise Filter Auto HDMI Black Level Low Film Mode Off ■ Colour Tone (Cool / Standard / Warm1 / Warm2) ✎ Warm1 or Warm2 will be deactivated when the picture mode is Dynamic. ✎ Settings can be adjusted and stored for each external device connected to an input on the LED display. ■ Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation): If the broadcast signal received by your LED display is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen. ✎ When the signal is weak, try other options until the best picture is displayed. Auto Visualisation: When changing analogue channels, displays signal strength. ✎ Only available for analogue channels. ✎ When bar is green, you are receiving the best possible signal. ■ MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality. ■ HDMI Black Level (Low / Normal): Selects the black level on the screen to adjust the screen depth. ✎ Available only in HDMI mode (RGB signals). ■ Film Mode (Off / Auto1 / Auto2): Sets the LED display to automatically sense and process film signals from all sources and adjust the picture for optimum quality. ✎ Available in TV mode, HDMI (1080i). ✎ If the screen does not seem natural, change its option to Off / Auto1 / Auto2 in Film Mode. Reset Picture (Yes / No) Resets your current picture mode to its default settings. Sound Menu ¦ Changing the Preset Sound Mode MENUm→ Sound → Sound Mode → ENTERE Sound Mode t ■ Standard: Selects the normal sound mode. ■ Music: Emphasizes music over voices. ■ Movie: Provides the best sound for movies. ■ Clear Voice: Emphasizes voices over other sounds. ■ Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired. ✎If Speaker Select is set to External Speaker , Sound Mode is disabled. ¦ Adjusting Sound Settings Sound Effect MENUm→ Sound → Sound Effect → ENTERE (standard sound mode only)  This function pr ■ SRS TruSurround HD(Off / On) ovides a virtual 5.1 channel surround sound t experience through a pair of speakers using HRTF (Head Related Transfer Function) technology. ■ SRS TruDialog (Off / On)  This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly. ■ Equalizer  Adjusts the sound mode. – Balance L/R: Adjusts the balance between the right and left speaker. 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies. – Reset: Resets the equaliser to its default settings.English 26 Basic Features ¦ Sound Systems, Etc. MENUm→ Sound → ENTERE Broadcast Audio Options ■ Audio Language  (digital channels only)  Change the default value for audio languages. ✎ The available language may differ depending on the broadcast. ■ Audio Format  (digital channels only)  Select the audio format. ■ Audio Description  (not available in all locations) (digital channels only)  This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster. ✎ Audio Description (Off / On): Turn the audio description function on or off. ✎ Volume: Adjust the audio description volume. Additional Settings (digital channels only) ■ DTV Audio Level (MPEG / HE-AAC): This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level. ✎ According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB. ✎ To increase or decrease the volume, adjust between the range 0 and -10 respectively. ■ SPDIF Output: SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player. – Audio Format: You can select the Digital Audio output (SPDIF) format. ✎ The available Digital Audio output (SPDIF) format may differ depending on the input source. – Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms). ✎ It's not available for TB300 series. ■ Dolby Digital Comp (Line / RF): This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound). ✎ Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time. Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB. RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB. Speaker Settings ■ Speaker Select (External Speaker / TV Speaker):A sound echo may occur due to a difference indecoding speed between the main speaker and theaudio receiver. In this case, set the TV to External Speaker. ✎ When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited. ✎ When Speaker Select is set to External Speaker. x TV Speaker: Off, External Speaker: On ✎ When Speaker Select is set to TV Speaker. x TV Speaker: On, External Speaker: On ✎ If there is no video signal, both speakers will be mute. ✎ It's not available for TB300 series. ■ Auto Volume (Off / Normal / Night): To equalize the volume level on each channel, set to Normal. Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night. Reset Sound (Yes / No) Reset all sound settings to the factory defaults. ¦ Selecting the Sound Mode t When you set to Dual fg, the current sound mode is displayed on the screen. Audio Type Dual f-g Default A2 Stereo Mono Mono Automatic Stereo Stereo ↔ Mono change Dual Dual f ↔ Dual g Dual f NICAM Stereo Mono Mono Automatic Stereo Mono ↔ Stereo change Dual Mono ↔ Dual f  Dual g  Dual f ✎If the Stereo signal is weak and an automatic switching, occurs, then switch to the Mono. ✎Only activated in stereo sound signal. ✎Only available when the input Source is set to TV.English 27 Basic Features System Menu ¦ Setting the Time MENUm→ System → ENTERE Time ■ Clock: Setting the clock is for using various timer features of the LED display. ✎ The current time will appear every time you press the INFO button. ✎ If you disconnect the power cord, you have to set the clock again. Clock Mode (Auto / Manual) x Auto: Set the current time automatically using the time from a digital channel. ✎ The antenna must be connected in order to set the time automatically. x Manual: Set the current time manually. ✎ Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually. Clock Set: Set the Day, Month, Year, Hour and Minute manually. ✎ Available only when Clock Mode is set to Manual. ✎ You can set the Day, Month, Year, Hour and Minute directly by pressing the number buttons on the remote control. Time Zone (Auto / Manual) (depending on the country): Select your time zone. ✎ This function is only available when the Clock Mode is set to Auto. – GMT(GMT-3:00~GMT-1:00 / GMT / GMT+1:00~GMT+ 12:00): Selects your time zone. ✎ This function is only available when the Time Zone is set to Manual. – DST(Daylight Saving Time) (Off / On): Switches the Daylight Saving Time function on or of off. ✎ This function is only available when the Time Zone is set to Manual. Using the Sleep Timer ■ Sleep Timer t: Automatically shuts off the LED display after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes). ✎ To cancel Sleep Timer, select Off. Setting the On / Off Timer ■ On Timer On Timer 1 / On Timer 2 / On Timer 3: Three different on timer settings can be made. You must set the clock first. On Timer 1 Setup Off Time 0:00 Volume 20 Source TV Aerial DTV Channel 1 Sun Mon Tue Wed Thu Fri Sat R Return Close Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select Manual, you can set up the day you want to activate the timer. ✎ The c mark indicates the day you've selected. Time: Set the hour and minute. Volume: Set the desired volume level. Source: Select a desired input source when the LED display is turned on automatically. (USB can be selected only when a USB device is connected to the LED display) Aerial (when the Source is set to TV): Select ATV or DTV. Channel (when the Source is set to TV): Select the desired channel. Music / Photo (when the Source is set to USB): Select a folder in the USB device containing music or photo files to be played when the LED display is turned on automatically. ✎ NOTE x If there is no music file on the USB device or the folder containing a music file is not selected, the Timer function does not operate correctly. x When there is only one photo file in the USB, the Slide Show will not play. x If a folder name is too long, the folder cannot be selected. x Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folders assigned to each USB have different names. x It is recommended that you use a USB memory stick and a multi card reader when using On Timer. x The On Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by some manufacturers because these devices take a long time to be recognized.English 28 Basic Features ■ Off Timer Off Timer 1 / Off Timer 2 / Off Timer 3: Three different off timer settings can be made. You must set the clock first. Off Timer 1 Setup Off Time 0:00 Sun Mon Tue Wed Thu Fri Sat R Return Close Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select Manual, you can set up the day you want to activate the timer. ✎ The c mark indicates the day you've selected. Time: Set the hour and minute. ¦ Locking Programmes MENUm→ System → Security → ENTERE Security ✎The PIN input screen appears before the setup screen. ✎Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option. ■ Channel Lock (Off / On): Lock channels in Channel Manager, to prevent unauthorized users, such as children, from watching unsuitable programme. ✎ Available only when the input Source is set to TV. ■ Program Rating Lock (depending on the country): Prevent unauthorized users, such as children, from watching unsuitable programme with a user-defined 4-digit PIN code. If selected channel is locked, the “\” symbol will be displayed. ✎ The items of Program Rating Lock differs depending on the country. ■ Change PIN: The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them. Change your personal ID number required to set up the LED display. Re-enter the same 4 digits. When the Confirm screen disappears, your PIN has been memorised. ¦ Economical Solutions MENUm→ System → Eco Solution → ENTERE Eco Solution ■ tEnergy Saving (Off / Low / Medium / High / Picture Off) : This adjusts the brightness of the LED display in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen. ■ No-Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid unnecessary energy consumption, set how long you want the LED display to remain on if it’s not receiving a signal. ✎ Disabled when the PC is in power saving mode. ■ Auto Power Off (Off / On): Saves power by turning LED display off automatically when no user operation is received for 4 hours. ¦ Other Features MENUm→ System → ENTERE Language ■ Menu Language: Set the menu language. ■ Teletext Language: Set a desired language for teletext. ✎ English is the default in cases where the selected language is unavailable in the broadcast. ■ Preferred Language (Primary Audio / Secondary Audio / Primary Subtitle / Secondary Subtitle): Select a language, which will be the default language when a channel is selected. Subtitle Use this menu to set the Subtitle mode. ■ Subtitle (Off / On): Switches subtitles on or off. ■ Subtitle Mode (Normal / Hearing Impaired): Sets the subtitle mode. ■ Subtitle Language: Sets the subtitle language. ✎ If the programme you are watching does not support the Hearing Impaired function, Preferred automatically activates even if the Hearing Impaired mode is selected. ✎ English is the default in cases where the selected language is unavailable in the broadcast.English 29 Basic Features Digital Text (Disable / Enable) (UK only) If the programme broadcasts with digital text, this feature is enabled. Auto Protection Time ■ Off / 2 hours / 4 hours / 8 hours / 10 hours: If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen. General ■ Max. Power Saving (Off / On): Turn off PC monitor when PC is not used for certain length of time to reduce power consumption. ■ Game Mode (Off / On): When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode. ✎NOTE x Precautions and limitations for game mode – To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu. – If you display the LED display menu in Game Mode, the screen shakes slightly. x Game Mode is not available when the input source is set to TV or PC. x After connecting the game console, set Game Mode to On. Unfortunately, you may notice reduced picture quality. x If Game Mode is On: – Picture mode is set to Standard and Sound mode is set to Movie. ■ Panel Lock (Off / On): Lock or unlock all the keys on the front panel at once. When Panel Lock is on, none of the keys on the front panel operate. ■ Boot Logo (Off / On): Display Samsung logo when the LED display is turned on. Common Interface ■ CI Menu: This enables the user to select from the CAMprovided menu. Select the CI Menu based on the menu PC Card. ■ Application Info: View information on the CAM inserted into the CI slot and on the “CI or CI+ CARD” which is inserted into the CAM. You can install the CAM anytime whether the LED display is on or off. 1. Purchase a CI CAM module at your nearest dealer or by phone. 2. Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the arrow. 3. Insert the CAM with the “CI or CI+ CARD” into the common interface slot, in the direction of the arrow so that it aligns parallel with the slot. 4. Check if you can see a picture on a scrambled signal channel. ¦ Picture In Picture (PIP) MENUm→ System → PIP → ENTERE You can watch the LED display tuner and one external video PIP t source simultaneously. PIP (Picture-in-Picture) does not function in the same mode. ✎NOTE x For PIP sound, refer to the Sound Select instructions. x If you turn the LED display off while watching in PIP mode, the PIP window will disappear. x You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke. x While Program Rating Lock is in operation, the PIP function cannot be used. x PIP settings Main picture Sub picture HDMI, HDMI(PC), Component, PC TV ■ PIP (Off / On): Activate or deactivate the PIP function. ■ Channel: Select the channel for the sub-screen. ■ Size (Õ / Ã): Select a size for the sub-picture. ■ Position (à / – / — / œ): Select a position for the sub-picture. ■ Sound Select (Main / Sub): You can choose the desired sound (Main / Sub) in PIP mode. ¦ DivX® Video On Demand Shows the registration code authorized for the TV. If you connect to the DivX web site and register, you can download the VOD registration file. If you play the VOD registration using Media contents, the registration is completed. ✎For more information on DivX® VOD, visit “http://vod.divx. com”.English 30 Basic Features Support Menu MENUm→ Support → ENTERE Self Diagnosis ✎Self Diagnosis might take few seconds, this is part of the normal operation of the LED display ■ Picture Test (Yes / No): Use to check for picture problems. Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes. There may be a problem with the LED display. Contact Samsung’s Call Centre for assistance. No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual. ■ Sound Test (Yes / No): Use the built-in melody sound to check for sound problems. Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes. There may be a problem with the LED display. Contact Samsung’s Call Centre for assistance. No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual. ■ Signal Information: (digital channels only) An HD channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength. ■ Reset: Restores all settings to factory defaults except network settings. Software Upgrade Software Upgrade can be performed via a broadcasting signal or downloading the latest firmware from “www.samsung.com,” to a USB memory device. Current Version the software already installed in the LED display. ✎Software is represented as “Year/Month/Day_Version”. Software Upgrade By USB By Channel Alternative Software Standby Mode Upgrade 2 hours later Installing the Latest Version ■ By USB: Insert a USB drive containing the firmware upgrade file, downloaded from “www.samsung.com,” into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can easily reset them after the upgrade. ■ By Channel: Upgrade the software using the broadcasting signal. ✎ If the function is selected during the software transmission period, software will be automatically searched and downloaded. ✎ The time required to download the software is determined by the signal status. ■ Alternative Software: Replace the current software with the alternative. ■ Standby Mode Upgrade (Off / 1 hour later / 2 hours later / 00:00 / 02:00 / 12:00 / 14:00): A manual upgrade will be automatically performed at selected time. Since the power of the unit is turned on internally, the screen may be turned on slightly for the LED product. This phenomenon may continue for more than 1 hour until the software upgrade is complete. Contact Samsung View this information when your LED display does not work properly or when you want to upgrade the software. You can find information regarding our call centres, and how to download products and software. Contents Home You can enjoy useful and various contents. TV Side USB DriveEnglish 31 Advanced Features Enjoy videos, photos, music files saved on a USB Mass Storage Class (MSC) device. 1. Press the CONTENT button. 2. Press the l / r button to select desired menu (Media Play), then press the ENTERE button. CONTENT → Media Play → ENTERE Using the Media Play ¦ Connecting a USB Device 1. Turn on your TV. 2. Connect a USB device containing photo and music files to the USB jack on the side of the TV. 3. When USB is connected to the TV, popup window appears. Then you can select Device connected. ✎It might not work properly with unlicenced multimedia files. ✎Need-to-Know List before using Media Play. x MTP (Media Transfer Protocol) is not supported. x The file system supports FAT16, FAT32 and NTFS. x Certain types of USB Digital camera and audio devices may not be compatible with this TV. x Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported). Devices should be connected directly to the TV’s USB port. x USB (HDD) is not supported. x Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. x Do not disconnect the USB device while it is loading. x The higher the resolution of the image, the longer it takes to display on the screen. x The maximum supported JPEG resolution is 15360 x 8640 pixels. x For unsupported or corrupted files, the “Not Supported File Format” message is displayed. x MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a technology that supports the creation, distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements. x If more than 2 PTP devices are connected, you can only use one at a time. x If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high power (more than 500mA or 5V) may not be supported. x If an over-power warning message is displayed while you are connecting or using a USB device, the device may not be recognized or may malfunction. Media Play / Videos / 3.23GB Free / 3.55GB Cruzer Blade Videos Photos Music R Return • The displayed image may differ depending on the model. TV Side USB DriveEnglish 32 Advanced Features x If the TV has been no input during time set in Auto Protection Time, the Screensaver will run. x The power-saving mode of some external hard disk drives may be released automatically when connected to the TV. x If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read. x If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is not played, connect the USB device to the PC, format the device and check the connection. x Media Play only supports sequential jpeg format. ¦ Screen Display Move to the desired file using the u / d / l / r buttons and then press the ENTERE button. The file is played. Media Play screen may differ depending on the way to enter the screen. Contents mode: You can select the desired Content Category. Information: Displays the selected content category (Music, for example), device (USB drive,for example), folder/file name and page. Displays the selected file information. Upper Folder Video_02 1.Jan.2012 Video_02.AVI 1.Jan.2012 17.6MB Video_03 1.Jan.2012 Video_04 1.Jan.2012 Video_05 1.Jan.2012 Video_06 1.Jan.2012 Video_07 1.Jan.2012 Video_08 1.Jan.2012 Video_01 1.Jan.2012 Media Play / Videos / Cruzer.../Video_02.AVI 2 / 8 �µ Page Move E Play T Tools R Return Operation Buttons • �Turn to the previous page. Only available in Music. • µTurn to the next page. Only available in Music. • E Play: Play the media file. • T Tools: Displays the option menu. • R Return: Move to the previous step. • The displayed image may differ depending on the model.English 33 Advanced Features Videos Playing Video 1. Press the l / r / u / d button to select the desired video in the file list. 2. Press the ENTERE button or ∂ (Play) button. x The selected file name is displayed on the top with its playing time. x If video time information is unknown, play time and progress bar are not displayed. x During video playback, you can search using l and r button. x You can use π (REW) and µ (FF) buttons during playback. ✎ In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself. • The displayed image may differ depending on the model. Supported Subtitle Formats – External Name Extension MPEG-4 Timed text .ttxt SAMI .smi SubRip .srt SubViewer .sub Micro DVD .sub or .txt SubStation Alpha .ssa Advanced SubStation Alpha .ass Powerdivx .psb – Internal Name Container Xsub AVI SubStation Alpha MKV Advanced SubStation Alpha MKV SubRip MKV MPEG-4 Timed text MP4English 34 Advanced Features Supported Video Formats File Extension Container Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Comments Audio Codec *.avi *.mkv *.asf *.wmv *.mp4 *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.m2ts *.mts *.divx AVI MKV ASF MP4 3GP VRO VOB PS TS DivX 3.11 / 4.x / 5.1 / 6.0 1920 x 1080 30 20 [40] GMC Not Support AC3 LPCM ADMPCM(IMA, MS) AAC HE-AAC WMA DD+ MPEG(MP3) DTS Core Vorbis MPEG4 SP / ASP H.264 BP / MP / HP Not Include FMO / ASO / RS Support BP / MP / HP Level 4.1 H.263 Profile3, restricted up to SD resolution Motion JPEG 640 x 480 10 Window Media Video v9 1920 x 1080 20 [40] VC1 SP / MP / A P L3 Support, L4 Not Support Simple Profile Medium Level Main Profile High Level Advanced Profile Level 3 WMV9 support MPEG2 Hight Profile High Level MPEG1 MPEG-1 except D-pictureEnglish 35 Advanced Features Other Restrictions ✎NOTE x If there are problems with the contents of a codec, the codec will not be supported. x If the information for a Container is incorrect and the file is in error, the Container will not be able to play correctly. x Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/ sec listed in the table above. x If the Index Table is in error, the Seek (Jump) function is not supported. x You may experience file stuttering while playing a video through a network connection. Name Format x Supports up to H.264, Level 4.1 x H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported. x MPEG4 SP, ASP: – Below 1280 x 720: 60 frame max – Above 1280 x 720: 30 frame max x GMC 2 over is not supported. x Supports up to WMA 7, 8, 9, STD x WMA 9 PRO does not support 2 channel excess multi channel or lossless audio. x WMA sampling rate 22050Hz mono is not supported. Photos Viewing a Photo (or Slide Show) 1. Press the u / d / l / r button to select the desired photo in the file list. 2. Press the ENTERE button. – When a selected photo is displayed, press the ENTERE button to start the slide show. – During the slide show, all files in the file list will be displayed in order. ✎Music files can be automatically played during the Slide Show if the Background Music is set to On. ✎The Background Music cannot be changed until the BGM has finished loading. • The displayed image may differ depending on the model. 0801181247070.JPG 1.Jan.2012 663.0KB 1920 x 1080 �µPage Move E Play T Tools R Return Media Play / Photos / Cruzer... / Photos / 0801181... .JPG 7 / 1000 Upper Folder Supported Picture Formats File Extension Format Resolution *.jpg JPEG 15360 x 8640 *.bmp BMP 1920 x 1080 *.mpo MPO 15360 x 8640English 36 Advanced Features Music Playing Music 1. Press the u / d button to select the desired Music in the file list. 2. Press the ENTERE button. ✎Only displays the files with the file extension in following supported music formats list. Other file extensions are not displayed, even if they are saved on the same USB device. ✎If the sound is abnormal when playing MP3 files, adjust the Equaliser in the Sound menu. (An over-modulated MP3 file may cause a sound problem.) • The displayed image may differ depending on the model. Media Play / Music / Cruzer... / Music / Music_01.mp3 Music_01 Singer 1 Music_02 Singer 2 Music_01 Singer 1 2003 Fallen Other 2:36 / 5:00 Music_03 Singer 3 Music_04 Singer 4 Music_05 Singer 5 Music_06 Singer 6 Music_07 Singer 7 Music_08 Singer 8 Music_09 Singer 9 Upper Folder b{ Page Move EPlay T Tools R Return Playing selected music 1. Press the TOOLST button and select Play Selection. 2. Select the desired music. ✎ The c mark appears to the left of the selected files. 3. Press the TOOLST button and select Play Selection. ✎ You can select or deselect all music pressing the Select All / Deselect All. Supported Music Formats File Extension Type Codec *.mp3 MPEG MPEG1 Audio Layer 3 *.m4a *.mpa *.aac *.3ga MPEG4 AAC *.flac FLAC FLAC *.ogg OGG Vorbis *.wma WMA WMAEnglish 37 Advanced Features ¦ Media Play - Additional Functions Videos/Photos/Music Play Option menu Press the TOOLST button and you can make the following operations. Category Operations Videos Photos Music Shuffle Mode You can play the music randomly. > Repeat Mode You can play media files repeatedly. > > Picture Mode You can adjust the picture setting. > > Sound Mode You can adjust the sound setting. > > > Start Slide Show / STOP Slide Show You can start or pause a Slide Show. > Slide Show Speed You can select the slide show speed during the slide show. > Background Music You can on/off background music when watching a Slide Show. > Background Music Setting You can select background music when watching a Slide Show. > Zoom You can zoom into images in full screen mode. > Rotate You can rotate images in full screen mode. > Information You can see detailed information about the played file. > > > Play Selection You can play the items what you selected. > > > Title Search You can move directly to another Title. > Time Search You can search the movie using l and r buttons at intervals of 1 minute. > Picture Size You can adjust the picture size to your preference. > Subtitle You can set the subtitle On / Off. > Subtitle Settings Play a video file with captions displayed. This option is available only when the caption file name matches the video file name. > Audio language View a video in a supported language of your choice. The option is available only when a stream-type file that supports multiple audio formats is played. >English 38 Other Information Analogue Channel Teletext Feature The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed. ✎You can change Teletext pages by pressing the numeric buttons on the remote control. 1 / (Teletext on/mix/off): Activates the Teletext mode for the current channel. Press the button twice to overlap the Teletext mode with the current broadcasting screen. Press it one more time to exit teletext. 2 8 (store): Stores the Teletext pages. 3 6 (index): Displays the index (contents) page at any time while you are viewing Teletext. 4 4 (size): Displays the teletext on the upper half of the screen in double-size. To move the text to the lower half of the screen, press it again. For normal display, press it once again. 5 9 (hold): Holds the display at the current page, in the case that there are several secondary pages that follow automaticially. To undo, press it again. 6 Colour buttons (red, green, yellow, blue): If the FASTEXT system is used by the broadcasting company, the different topics on a Teletext page are colour-coded and can be selected by pressing the coloured buttons. Press the colour corresponding to the topic of your choice. A new colour-coded page is displayed. Items can be selected in the same way. To display the previous or next page, press the corresponding coloured button. 7 0 (mode): Selects the Teletext mode (LIST/ FLOF). If pressed during LIST mode, switches the mode to List save mode. In List save mode, you can save a Teletext page into a list using the 8(store) button. 8 1 (sub-page): Displays the available sub-page. 9 2 (page up): Displays the next Teletext page. 0 3 (page down): Displays the previous Teletext page. ! 5 (reveal): Displays the hidden text (answers to quiz games, for example). To display the normal screen, press it again. @ 7 (cancel): Shrinks the Teletext display to overlap with the current broadcast. Typical Teletext page Part Contents A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text. F Status information. FASTEXT information. 7 8 9 0 ! @ 3 1 4 5 6 2English 39 Other Information Attaching a Wall Mount/Desktop Stand Preparing before installing Wall-Mount/Desktop Stand 1. Turn the product off and unplug the power cord from the wall outlet. 2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product face down. 3. Hold the main body of the product with your hand. Pull the stand in the direction of the arrow as shown in the figure to separate it. Attaching a Wall Mount/Desktop Stand 1 A 2 3 4 A B Wall mount kit/desktop stand (not supplied) A Wall/Desktop Stand Mount B [ Caution Important For the installation of Wall-mount, please don’t use screws longer than 14mm(L14) of longitude. 4. Align wall mount/desktop stand to the Monitor/LED display and firmly fix the wall mount/desktop stand by fastening the screw. 5. Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand, wall mount stand or another stand) and firmly fix the stand by fastening the screw.English 40 Other Information ✎NOTE x If you use screws that are longer than the standard specifications, the inside of the product may be damaged. x For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ depending on the corresponding specifications. x Avoid using screws that are incompatible with the standard VESA specifications and avoid assembling them using excessive force. This may result in damage to the product or injury due to the product falling. Samsung shall not be held liable for any damage or injury. x Samsung shall not be held liable for any damage to the product or injury caused by using a wall mount/desktop stand that is not compatible with the specifications or due to an installation not performed by an authorized installation engineer. x When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm (3.93 inches) of space from the wall. x Use the wall mount according to the international specifications. Anti-theft Kensington Lock The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use. ✎Please find a “K” icon on the rear of the LED display. A kensington slot is beside the “K” icon. To lock the product, follow these steps: 1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair. 2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable. 3. Insert the locking device into the Kensington slot on the product (1). 4. Lock the lock. 1 ✎These are general instructions. For exact instructions, see the User manual supplied with the locking device. ✎The locking device has to be purchased separately. ✎The location of the Kensington slot may be different depending on the LED display model.English 41 Other Information Troubleshooting If you have any questions about the LED display, first refer to this list. If none of these troubleshooting tips apply, please visit “www. samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual. Issues Solutions and Explanations Picture Quality First of all, please perform the Picture Test and confirm that your LED display is properly displaying test image. (go to MENU - Support - Self Diagnosis - Picture Test) If the test image is properly displayed, the poor picture may caused by the source or signal. The LED display image does not look as good as it did in the store. • If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI to deliver HD (high definition) picture quality. • Cable/Satellite subscribers: Try HD stations from the channel line up. • Antenna connection: Try HD stations after performing Auto tuning. ✎ Many HD channels are up scaled from SD(Standard Definition) contents. • Adjust the Cable/Set top box video output resolution to 1080i or 720p. • Make sure you are watching the LED display at the minimum recommended distance based on the size and definition of the signal. The picture is distorted: macroblock error, small block, dots, pixelization • Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies. • Low signal level or bad quality can cause picture distortion. This is not a LED display issue. • Mobile phones used close to the LED display (cca up to 1m) may cause noise in picture on analogue and digital LED display. There is poor colour or brightness. • Adjust the Picture options in the LED display menu. (go to Picture Mode / Colour / Brightness / Sharpness) • Adjust Energy Saving option in the LED display menu. (go to MENU - System - Eco Solution - Energy Saving) • Try resetting the picture to view the default picture settings. (go to MENU - Picture - Reset Picture) There is a dotted line on the edge of the screen. • If the picture size is set to Screen Fit, change it to 16:9. • Change cable/satellite box resolution. When changing channels, the picture freezes or is distorted or delayed. • If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box reboots. It may take up to 20 minutes. • Set the output resolution of the cable box to 1080i or 720p. Sound Quality First of all, please perform the Sound Test to confirm that your LED display audio is properly operating. (go to MENU - Support - Self Diagnosis - Sound Test) If the audio is OK, the sound problem may caused by the source or signal. There is no sound or the sound is too low at maximum volume. • Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc) connected to your LED display. The picture is good but there is no sound. • If you are using a DVI to HDMI cable, LED display set does not support audio. • Reboot the connected device by reconnecting the device’s power cable. • If your LED display has a headphone jack, make sure there is nothing plugged into it. The speakers are making an inappropriate noise. • For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion. No Picture, No Video The LED display will not turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the LED display. • Make sure the wall outlet is working. • Try pressing the POWER button on the LED display to make sure the problem is not the remote. If the LED display turns on, refer to “The remote control does not work” below. The LED display turns off automatically. • Ensure the Sleep Timer is set to Off in the Time menu. • If your PC is connected to the LED display, check your PC power settings. • Make sure the AC power cord is plugged in securely to the wall outlet and the LED display. • When watching LED display from an antenna or cable connection, the LED display will turn off after 10 ~ 15 minutes if there is no signal.English 42 Other Information Issues Solutions and Explanations There is no picture/video. • Check cable connections (remove and reconnect all cables connected to the LED display and external devices). • Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the LED display input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the LED display. • Make sure your connected devices are powered on. • Be sure to select the LED display correct source by pressing the SOURCE button on the LED display remote. • Reboot the connected device by reconnecting the device’s power cable. RF(Cable/Antenna) Connection The LED display is not receiving all channels. • Make sure the Antenna cable is connected securely. • Please try Setup (Initial setup) to add available channels to the channel list. Go to MENU - System - Setup (Initial setup) and wait for all available channels to be stored. • Verify the Antenna is positioned correctly. The picture is distorted: macro block error small block, dots, pixelization. • Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action movies. • A low signal can cause picture distortion. This is not a LED display issue. Others The picture will not display in full screen. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents. • Black bars on the top and bottom will appear during movies that have aspect ratios different from your LED display. • Adjust the picture size options on your external device or LED display to full screen. The remote control does not work. • Replace the remote control batteries with the poles (+/–) in the right direction. • Clean the sensor’s transmission window on the remote. • Try pointing the remote directly at the LED display from 5~6 feet away. The cable/set top box remote control doesn’t turn the LED display on or off, or adjust the volume. • Programme the Cable/Set top box remote control to operate the LED display. Refer to the Cable/Set user manual for the SAMSUNG LED display code. A “Mode Not Supported” message appears. • Check the supported resolution of the LED display, and adjust the external device’s output resolution accordingly. There is a plastic smell from the LED display. • This smell is normal and will dissipate over time. The LED display Signal Information is unavailable in the Self Diagnosis Test menu. • This function is only available with digital channels from an Antenna / RF / Coax connection. LED display is tilted to the right or left side. • Remove the stand base from the LED display and reassemble it. There are difficulties assembling the stand base. • Make sure the LED display is placed on a flat surface. If you can not remove the screws from the LED display, please use a magnetized screw driver. The Channel menu is grey out (unavailable). • The Channel menu is only available when the LED display source is selected. Your settings are lost after 30 minutes or every time the LED display is turned off. • If the LED display is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change the settings from Store Demo mode to Home Use mode in the Setup (Initial setup) procedure. Press the SOURCE button to select TV mode, and go to MENU → System → Setup (Initial setup) → ENTERE. You have intermittent loss of audio or video. • Check the cable connections and reconnect them. • Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the LED display to the wall, we recommend using cables with 90 degree connectors. You see small particles when you look closely at the edge of the frame of the LED display. • This is part of the product’s design and is not a defect.English 43 Other Information Issues Solutions and Explanations The PIP menu is not available. • PIP functionality is only available when you are using a HDMI source. You turned the LED display off 45 minutes ago, and it turned on again. • It is normal. The LED display operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst your watching LED display. The message “Scramble signal” or “Weak Signal/No Signal” appears. • If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot. • If there is still a problem, pull the CAM CARD out of the LED display and insert it into the slot again. There are recurrent picture/sound issues. • Check and change the signal/source. A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture. • To prevent this, use felt pads on any surface of the LED display that comes in direct contact with furniture. ✎This panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. ¦ Storage and Maintenance ✎If you attched some stickers on the LED display screen, it remains some debris after removing the sticker. Please clean it to watch LED display. ✎The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using the cloth provided or a soft cloth to prevent scratches. Do not spray water or a cleaning agent directly onto the product. Any liquid that goes into the product may cause a failure, fire, or electric shock. Clean the product with a soft cloth dapped in a small amount of water. [CAUTION If the height of " A" on one side is different from the other side, adjust the heights.English 44 Other Information ¦ Licence TheaterSound HD, SRS and the symbol are trademarks of SRS Labs, Inc. TheaterSound HD technology is incorporated under licence from SRS Labs, Inc. Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. 2.0 Channel Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. (Only available in TB300 series) Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product Includes software. © DTS, Inc. All Rights Reserved. (Only available in TB350 series) Open source licence notice In the case of using open source software, Open Source licence are available on the product menu. Open Source Licence Notice is written only English. ¦ WEEE Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.English 45 Other Information Specifications Environmental considerations Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C) Humidity : 10 % ~ 80 %, non-condensing Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C) Humidity : 5 % ~ 95 %, non-condensing Tilt -1°(±2°) ~ 20°(±2°) LED display System Analogue: B/G, D/K, L, I (Depending on your country selection) Digital: DVB-T/DVB-C Colour/Video System Analogue: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60 Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0 Sound System BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC HDMI IN Video: 1080 24p, 1080p, 1080i, 720p, 576p, 480p Audio: 2Ch Linear PCM 32/44.1/48kHz, 16/20/24bits. Model Name T19B300 T22B300 T24B300 T27B300 Screen Size (Diagonal) 18.5 inches (47 cm) 21.5 inches (55 cm) 23.6 inches (60 cm) 27 inches (69 cm) Display Resolution 1366 x 768 @ 60Hz 1920 x 1080 @ 60Hz Sound (Output) 5W × 2 Dimensions (WxDxH) (Without Stand) 444.7 x 52.6 x 278.2 mm (17.5 x 2.1 x 11.0 inches) 509.7 x 51.5 x 318.2 mm (20.1 x 2.0 x 12.5 inches) 569.2 x 53.4 x 349.4 mm (22.4 x 2.1 x 13.8 inches) 643.3 x 53.4 x 397.9 mm (25.3 x 2.1 x 15.7 inches) (With Stand) 444.7 x 187 x 356.4 mm (17.5 x 7.4 x 14.0 inches) 509.7 x 195 x 396.6 mm (20.1 x 7.7 x 15.6 inches) 569.2 x 195 x 428 mm (22.4 x 7.7 x 16.9 inches) 643.3 x 252 x 476.5 mm (25.3 x 9.9 x 18.8 inches) Weight (Without Stand) 2.95 kg (6.5 Ibs) 3.7 kg (8.2 Ibs) 4.25 kg (9.4 Ibs) 5.1 kg (11.2 Ibs) (With Stand) 3.2 kg (7.1 Ibs) 3.95 kg (8.7 Ibs) 4.5 kg (9.9 Ibs) 5.6 kg (12.3 Ibs) Model Name T22B350 T23B350 T24B350 Screen Size (Diagonal) 21.5 inches (55 cm) 23 inches (58 cm) 24 inches (61 cm) Display Resolution 1920 x 1080 @ 60Hz Sound (Output) 5W × 2 Dimensions (WxDxH) (Without Stand) 509.7 x 51.5 x 318.2 mm (20.1 x 2.0 x 12.5 inches) 547.5 x 53.4 x 337.9 mm (21.6 x 2.1 x 13.3 inches) 569.2 x 53.4 x 349.4 mm (22.4 x 2.1 x 13.8 inches) (With Stand) 509.7 x 195 x 396.6 mm (20.1 x 7.7 x 15.6 inches) 547.5 x 195 x 416.1 mm (21.6 x 7.7 x 16.4 inches) 569.2 x 195 x 428 mm (22.4 x 7.7 x 16.9 inches) Weight (Without Stand) 3.7 kg (8.2 Ibs) 3.25 kg (7.2 Ibs) 4.15 kg (9.1 Ibs) (With Stand) 3.95 kg (8.7 Ibs) 3.5 kg (7.7 Ibs) 4.45 kg (9.8 Ibs) ✎NOTE x Design and specifications are subject to change without prior notice. x For information about power supply, and more about power consumption, refer to the label attached to the product. x Some models may not be available for purchase depending on the region. x If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected. x DPM(Display Power Management) Function does not work if you used in conjunction with the HDMI IN (DVI) port of this product.Póngase en contacto con SAMSUNG WORLDWIDE Si tiene alguna pregunta o comentario en relación con productos de Samsung, póngase en contacto con el Centro de atención al cliente de SAMSUNG. País del Centro de atención al cliente Sitio web EUROPE ALBANIA 42 27 5755 http://www.samsung.com AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) http://www.samsung.com BELGIUM 02-201-24-18 http://www.samsung.com/be (Dutch) http://www.samsung.com/be_fr (French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 http://www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com Samsung Electronics Czech and Slovak, s.r.o.,Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8 DENMARK 70 70 19 70 http://www.samsung.com FINLAND 030 - 6227 515 http://www.samsung.com FRANCE 01 48 63 00 00 http://www.samsung.com GERMANY 01805 - SAMSUNG (726-7864, € 0,14/Min) http://www.samsung.com CYPRUS From landline : 8009 4000 http://www.samsung.com GREECE From landline : 80111-SAMSUNG (7267864) From landline & mobile : (+30)210 6897691 http://www.samsung.com HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.com ITALIA 800-SAMSUNG (726-7864) http://www.samsung.com KOSOVO +381 0113216899 http://www.samsung.com LUXEMBURG 261 03 710 http://www.samsung.com MACEDONIA 023 207 777 http://www.samsung.com MONTENEGRO 020 405 888 http://www.samsung.com NETHERLANDS 0900-SAMSUNG (0900-7267864) ( € 0,10/Min) http://www.samsung.com NORWAY 815-56 480 http://www.samsung.com POLAND 0 801-1SAMSUNG (172-678) +48 22 607-93-33 http://www.samsung.com PORTUGAL 80820-SAMSUNG (808207267) http://www.samsung.com RUMANIA From landline : 08010-SAMSUNG (7267864) From landline & mobile : (+40)21 206 01 10 http://www.samsung.com SERBIA 0700 SAMSUNG (0700 726 7864) http://www.samsung.com SLOVAKIA 0800 - SAMSUNG (0800-726 786) www.samsung.com/sk SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) http://www.samsung.com/ch http://www.samsung.com/ch_fr (French) U.K 0330 SAMSUNG (7267864) http://www.samsung.com EIRE 0818 717100 http://www.samsung.com LITHUANIA 8-800-77777 http://www.samsung.com LATVIA 8000-7267 http://www.samsung.com ESTONIA 800-7267 http://www.samsung.com TURKEY 444 77 11 http://www.samsung.com CIS RUSSIA 8-800-555-55-55 http://www.samsung.com GEORGIA 8-800-555-555 http://www.samsung.com ARMENIA 0-800-05-555 http://www.samsung.com AZERBAIJAN 088-55-55-555 http://www.samsung.com KAZAKHSTAN 8-10-800-500-55-500(GSM: 7799) http://www.samsung.com UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.com KYRGYZSTAN 00-800-500-55-500 http://www.samsung.com TADJIKISTAN 8-10-800-500-55-500 http://www.samsung.com© 2012 Samsung Electronics Co., Ltd. All rights reserved. BN46-00196C-03 País del Centro de atención al cliente Sitio web MONGOLIA http://www.samsung.com UKRAINE 0-800-502-000 http://www.samsung.com/ua http://www.samsung.com/ua_ru BELARUS 810-800-500-55-500 http://www.samsung.com MOLDOVA 00-800-500-55-500 http://www.samsung.com ASIA PACIFIC AUSTRALIA 1300 362 603 http://www.samsung.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com CHINA 400-810-5858 http://www.samsung.com HONG KONG (852) 3698 - 4698 http://www.samsung.com/hk http://www.samsung.com/hk_en/ INDIA 1800 1100 11 3030 8282 1800 3000 8282 1800 266 8282 http://www.samsung.com INDONESIA 0800-112-8888 021-5699-7777 http://www.samsung.com JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com PHILIPPINES 1-800-10-SAMSUNG (726-7864) for PLDT 1-800-3-SAMSUNG(726-7864) for Digitel 1-800-8-SAMSUNG(726-7864) for Globe02-5805777 http://www.samsung.com SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com THAILAND 1800-29-3232 02-689-3232 http://www.samsung.com TAIWAN 0800-329-999 0266-026-066 http://www.samsung.com VIETNAM 1 800 588 889 http://www.samsung.com MIDDLE EAST IRAN 021-8255 http://www.samsung.com OMAN 800-SAMSUNG(726-7864) http://www.samsung.com KUWAIT 183-2255 http://www.samsung.com BAHRAIN 8000-4726 http://www.samsung.com EGYPT 08000-726786 http://www.samsung.com JORDAN 800-22273 http://www.samsung.com MOROCCO 080 100 2255 http://www.samsung.com SAUDI ARABIA 9200-21230 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com AFRICA CAMEROON 7095- 0077 http://www.samsung.com COTE D’ IVOIRE 8000 0077 http://www.samsung.com GHANA 0800-10077 http://www.samsung.com 0302-200077 KENYA 0800 724 000 http://www.samsung.com NIGERIA 0800-726-7864 http://www.samsung.com SENEGAL 800-00-0077 http://www.samsung.com SOUTH AFRICA 0860-SAMSUNG(726-7864) http://www.samsung.com TANZANIA 0685 88 99 00 http://www.samsung.com UGANDA 0800 300 300 http://www.samsung.com MONITEUR TV LED (MFM TV) Manuel d'utilisation Nous vous remercions d'avoir acheté ce produit Samsung. Afin de bénéficier d'un service aprèsvente optimal, veuillez enregistrer votre produit sur la page www.samsung.com/register TB300 TB350Français 2 Les figures et illustrations qui apparaissent dans le présent manuel sont fournies uniquement à titre indicatif et ne représentent pas nécessairement la réalité à l'identique. La conception et les spécifications du produit sont susceptibles d'être modifiées sans préavis. Notice du moniteur LED numérique 1. Les fonctionnalités spécifiques au téléviseur numérique (DVB) ne sont disponibles que dans les pays/zones ayant adopté le standard de TV numérique terrestre DVB-T (MPEG2 et MPEG4 AVC) ou permettant d'accéder à un service de câblo-opérateur compatible DVB-C (MPEG2 et MPEG4 AAC). Pour savoir si vous pouvez recevoir le signal DVB-T ou DVB-C, adressez-vous à votre revendeur local. 2. DVB-T est la norme de diffusion de la télévision numérique terrestre du consortium européen DVB European ; DVB-C est la norme de transmission du signal numérique via le câble. 3. Même si le moniteur LED est conforme aux dernières normes DVB-T et DVB-C (août 2008), la compatibilité avec les futures normes de diffusion numérique terrestre DVB-T et par câble DVB-C ne peut pas être garantie. 4. Selon les pays/zones dans lesquels le moniteur LED est utilisé, certains câblo-opérateurs pourront appliquer des frais supplémentaires pour ce service. Vous serez peut-être tenu d'accepter leurs conditions. 5. Certaines fonctions du moniteur LED numérique ne sont peut-être pas disponibles dans certains pays ou régions et DVB-C risque de ne pas fonctionner correctement avec certains câblo-opérateurs. 6. Pour plus d'informations, adressez-vous à votre Service Consommateurs Samsung local. ✎ La qualité de réception sur le moniteur LED risque d'être perturbée en raison de différences dans les méthodes de radiodiffusion selon les pays. Renseignez-vous sur les performances du moniteur LED auprès de votre revendeur agréé SAMSUNG local ou du centre d'appels Samsung et vérifiez si la reconfiguration des paramètres permet ou non d'améliorer la qualité de l'affichage. Avertissement relatif aux images gelées Évitez d'afficher à l'écran des images fixes (telles que des photos au format jpeg) ou des éléments d'image fixe (tels que des logos de programmes TV, un format d'image 4:3 ou panoramique, des bandeaux d'actualité ou d'informations boursières au bas de l'écran, etc.). L'affichage d'images fixes pendant plusieurs heures risque de générer des effets de traînées à l'écran, ce qui nuit à la qualité de l'image. Pour minimiser les risques d'apparition de ces effets, conformez-vous aux recommandations suivantes : • Évitez d'afficher la même chaîne pendant de longues périodes. • Essayez toujours d'afficher l'image en mode plein écran, utilisez le menu de paramétrage de l'image du moniteur LED à la recherche de la meilleure adéquation possible. • Réduisez les valeurs de luminosité et de contraste au minimum requis pour obtenir la qualité d'image souhaitée ; les valeurs qui dépassent le seuil risquent d'accélérer le phénomène de brûlure d'écran. • Utilisez fréquemment toutes les fonctions du moniteur LED pour réduire le phénomène de rémanence des images et la brûlure d'écran. Pour plus d'informations à ce sujet, consultez la section appropriée du manuel d'utilisation. Sécurisation de l'espace d'installation Pour assurer une ventilation appropriée, maintenez les distances requises entre le produit et d'autres objets/surfaces (les murs, par exemple). À défaut de quoi, une augmentation de la température interne du produit risque de provoquer un incendie ou une panne. ✎ Selon le modèle utilisé, l'aspect du moniteur LED peut être différent des représentations figurant dans ce manuel. ✎ Soyez prudent lorsque vous manipulez le moniteur LED. Certains composants peuvent provoquer des brûlures. Installation sur un socle de support. Installation murale. 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm • Des frais d'administration pourront vous être imputés dans les cas suivants : – (a) un ingénieur se déplace à votre demande alors que le produit ne présente pas de défaut (en d'autres termes, une solution aurait pu être trouvée dans le manuel d'utilisation). – (b) vous apportez l'unité dans un centre de maintenance alors que le produit ne présente pas de défaut (en d'autres termes, une solution aurait pu être trouvée dans le manuel d'utilisation). • Le montant de ces frais vous sera spécifié avant qu'un spécialiste se déplace.3 FRANÇAIS Français Vérifiez le symbole Pour utiliser cette fonction, appuyez sur le bouton t TOOLST de la télécommande. Remarque Signale la présence d'informations supplémentaires. Table des matières Mise en route 4 4 Consignes de sécurité 11 Accessoires 12 Affichage du Panneau de commande 13 Télécommande Connexions 14 14 Connexion à une antenne 14 Configuration (Configuration initiale) 15 Connexion à un périphérique audio/vidéo 16 Connexion à un emplacement COMMON INTERFACE (interface commune) 17 Connexion à un périphérique audio et à un PC 19 Changement de source d'entrée Fonctionnalités de base 19 19 Comment naviguer dans les menus 20 Utilisation du bouton INFO (Guide Now & Next) 20 Utilisation du menu Canal 22 Menu Canal 23 Menu Image 25 Menu Son 27 Menu Système 30 Menu Assistance Fonctionnalités avancées 31 31 Utilisation du Media Play Autres informations 38 38 Fonction Télétexte sur les chaînes analogiques 39 Fixation d'un montage mural/sur socle de support 40 Verrou Kensington antivol 41 Dépannage 45 Spécifications4 Mise en route Français Consignes de sécurité Icônes utilisées pour la sécurité AVERTISSEMENT Le non-respect des précautions signalées par ce symbole peut provoquer des blessures graves ou même mortelles. ATTENTION Le non-respect des précautions signalées par ce symbole peut entraîner des blessures corporelles ou des dégâts matériels. Interdit. Indication à suivre. ATTENTION RISQUE DE CHOC ÉLECTRIQUE : NE PAS OUVRIR ATTENTION : POUR MINIMISER LE RISQUE DE CHOC ÉLECTRIQUE, NE RETIREZ PAS LE CAPOT (OU PANNEAU ARRIÈRE); NE CONTIENT AUCUN COMPOSANT SUSCEPTIBLE D'ÊTRE RÉPARÉ PAR L'UTILISATEUR. TOUTE RÉPARATION DOIT ÊTRE CONFIÉE À UN PERSONNEL QUALIFIÉ. Ce symbole indique la présence d'une haute tension dans le produit. Tout contact avec un composant interne du produit constitue un risque. Ce symbole vous informe qu'une documentation exhaustive concernant l'utilisation et l'entretien est fournie avec le produit. ¦ Spécifications d'alimentation ✎ Les schémas ci-après sont fournis à titre indicatif ; ils peuvent varier selon le modèle proposé et le pays d'utilisation. Avertissement Afin d'éviter tout risque d'électrocution ou d'incendie, x ne placez pas le produit près d'un humidificateur ou d'une cuisinière. Afin d'écarter tout risque d'incendie pouvant résulter d'une surchauffe de la prise murale, x évitez de brancher plusieurs appareils électriques à la même prise d'alimentation. Afin d'écarter tout risque d'électrocution, x ne manipulez pas la source d'alimentation avec les mains humides. ! Afin d'écarter tout risque d'incendie, x évitez de poser une bougie, une spirale anti-moustique ou une cigarette sur le produit. ! Afin de réduire tout risque d'électrocution ou de blessure corporelle, x veillez à brancher le câble d'alimentation à une prise murale reliée à la terre (matériel répondant à la classe d'isolation 1). Pour éviter d'endommager le câble d'alimentation et réduire les risques d'électrocution ou d'incendie, x évitez de courber ou de tordre le câble d'alimentation de manière excessive. Mise en route5 Mise en route Français Afin d'éviter tout risque d'électrocution ou d'incendie, x ne placez pas le produit près d'un humidificateur ou d'une cuisinière. ! Afin d'écarter tout risque d'incendie, x évitez de poser une bougie, une spirale anti-moustique ou une cigarette sur le produit. Attention Afin d'éviter qu'un choc électrique endommage le produit, x ne débranchez pas la prise lorsque le produit est en cours d'utilisation. ! Veillez à utiliser exclusivement le câble d'alimentation fourni par la société. Afin d'éviter tout risque d'électrocution ou d'incendie, x ne placez pas le produit près d'un humidificateur ou d'une cuisinière. ! Afin d'éviter tout risque d'électrocution ou d'incendie, x ne placez pas le produit près d'un humidificateur ou d'une cuisinière. ! Branchez le câble d'alimentation à une prise secteur facilement accessible x de façon à couper rapidement le courant en débranchant le cordon d'alimentation si un problème survient. En effet, appuyer sur le bouton de mise sous tension du produit ne suffit pas à couper complètement le courant. ¦ Recommandations d'installation Avertissement Afin d'écarter tout risque d'incendie, x évitez de poser une bougie, une spirale anti-moustique ou une cigarette sur le produit. ! Afin de réduire tout risque de blessure, x adressez-vous à un installateur agréé pour l'installation murale du produit. x Assurez-vous d'utiliser le support mural indiqué. Afin d'écarter tout risque d'incendie suite à une surchauffe interne, x évitez d'installer le produit dans un espace mal aéré tel qu'une étagère ou un placard. ! Conservez l'emballage plastique du produit dans un endroit que les enfants ne peuvent pas atteindre x afin d'éviter tout risque de suffocation. Évitez d'installer le produit sur une structure instable ou soumise à des vibrations excessives, telle qu'une étagère instable ou inclinée. x Ce dernier pourrait tomber et s'abîmer ou vous blesser. x De trop fortes vibrations risquent d'entraîner une panne ou de provoquer un incendie. ! Afin de réduire tout risque d'électrocution ou d'incendie, x évitez d'installer le produit dans un endroit exposé à la poussière, à l'humidité (sauna), à l'huile à la fumée ou à l'eau (gouttes de pluie), ou dans un véhicule.6 Mise en route Français Afin de ne pas écourter la durée de vie du produit et de réduire tout risque d'incendie, x n'exposez pas le produit à la lumière directe du soleil, à la chaleur et ne le posez pas près d'une source calorifique. Évitez d'installer le produit dans un endroit que les enfants peuvent atteindre. x Ils pourraient se blesser ou abîmer le produit en le touchant ou en le faisant tomber. x La partie avant étant plus lourde, installez le produit sur une surface plate et stable. ! Afin d'éviter les infiltrations d'eau de pluie, orientez le câble de l'antenne extérieure vers le bas depuis l'orifice d'entrée dans la pièce. x Tout contact du produit avec de l'eau peut provoquer un choc électrique ou un incendie. ! Installez l'antenne à distance des câbles à haute tension. x Si l'antenne touche ou tombe sur un câble à haute tension, cela peut provoquer un choc électrique ou un incendie. Attention ! Afin d'éviter tout dégât ou blessure, x faites attention à ne pas laisser tomber le produit lorsque vous le déplacez d'un endroit à un autre. Pour ne pas abîmer l'écran, x ne le posez pas face vers le bas. Afin d'éviter que le produit tombe, se casse ou blesse quelqu'un, x évitez de l'installer sur une console ou une étagère, et assurez-vous que la partie avant du produit ne soit pas saillante. x Assurez-vous d'utiliser une armoire ou une étagère adaptée à la taille du produit. ! Afin d'éviter tout dégât ou blessure, x évitez de poser des objets lourds sur le produit. SAMSUNG ! L'installation du produit dans un endroit où les conditions d'exploitation varient sensiblement peut entraîner une dégradation de ses performances. Si tel est le cas, demandez l'avis d'un de nos spécialistes avant de procéder à l'installation. x Les facteurs d'exposition sont les suivants : poussière microscopique, substances chimiques, température trop élevée ou trop basse, forte humidité, aéroports ou gares où le produit est utilisé en permanence.7 Mise en route Français ¦ Recommandations de nettoyage Avertissement ! Afin d'éviter tout risque d'électrocution ou d'incendie, x ne placez pas le produit près d'un humidificateur ou d'une cuisinière. Ne vaporisez pas d'eau directement sur les pièces du produit. x Pour ne pas abîmer le produit et pour écarter tout risque d'incendie ou d'électrocution, x veillez à ce que le produit n'entre pas en contact avec de l'eau. Attention Pour éviter la décoloration ou la fissuration de la surface extérieure du produit, x évitez de vaporiser du produit nettoyant directement sur sa surface. ! Pour nettoyer le produit, débranchez le cordon d'alimentation et utilisez le chiffon fourni dans l'emballage. x Pour éviter d'endommager la partie extérieure du produit ou de décoller les étiquettes,  n'utilisez pas les substances chimiques suivantes : cire, benzène, alcool, diluant, bombe anti-moustique, aérosol aromatique, lubrifiant ou détergent. ! Si le chiffon fourni dans l'emballage ne suffit pas à nettoyer le produit, utilisez un chiffon doux et humide imbibé d'un détergent « spécial agent ». x Si aucun détergent de ce type n'est disponible, diluez une mesure de détergent classique dans 10 volumes d'eau. ! La partie extérieure du produit pouvant facilement être rayée, assurez-vous d'utiliser le chiffon qui est fourni. ¦ Recommandations d'utilisation Avertissement Le produit étant soumis à haute tension, ne démontez, réparez ou modifiez jamais le produit vous-même, x contactez un centre de maintenance. x Si le produit doit être réparé, adressez-vous à un centre de maintenance. ! Pour éviter d'endommager le câble d'alimentation et réduire les risques d'électrocution ou d'incendie lorsque vous déplacez le produit, x mettez-le hors tension et débranchez le cordon d'alimentation, le câble d'antenne et tout autre fil connecté au produit.8 Mise en route Français ! Afin d'éviter tout risque d'électrocution ou d'incendie, x ne placez pas le produit près d'un humidificateur ou d'une cuisinière. Pour éviter toute chute du moniteur et que vos enfants se blessent (voire même mortellement), x empêchez-les de manipuler le produit. Éteignez le moniteur et débranchez le cordon d'alimentation si vous laissez tomber le produit ou que le boîtier est endommagé. Afin de réduire tout risque d'électrocution ou d'incendie, x contactez un centre de maintenance. Évitez de poser des jouets ou des gâteaux sur le produit. x Pour saisir un objet sur le moniteur, un enfant pourrait se blesser ou abîmer le produit en le touchant ou en le faisant tomber. ! Afin d'éviter tout risque d'électrocution ou d'incendie, x ne placez pas le produit près d'un humidificateur ou d'une cuisinière. ! Afin d'éviter tout risque d'électrocution ou d'incendie, x ne placez pas le produit près d'un humidificateur ou d'une cuisinière. Pour éviter d'endommager le câble d'alimentation et réduire les risques d'électrocution ou d'incendie, x ne soulevez/déplacez pas le produit en tirant sur le cordon ou le câble de signal. ! GAS En cas de fuite de gaz, ne touchez pas le produit ni la prise électrique et aérez immédiatement la pièce. x Une simple étincelle peut suffire à déclencher une explosion ou un incendie. x En cas d'orage ou de tempête, ne touchez pas le cordon d'alimentation ou le câble d'antenne. Pour éviter d'abîmer le cordon d'alimentation et que ce dernier ne provoque une défaillance, un incendie ou un choc électrique, x ne soulevez/déplacez pas le produit en tirant sur le cordon ou le câble de signal. ! Pour ne pas déclencher une explosion ou un incendie, x n'utilisez pas et ne conservez pas d'aérosol ou de substance inflammable à proximité du produit. Pour réduire tout risque d'incendie résultant d'une augmentation de la température interne, x assurez-vous que l'aération n'est pas obstruée par un chiffon ou un rideau. 100 N'insérez pas d'objet métallique (baguette, pièce, épingle à cheveux, etc.) ou inflammable dans les orifices d'aération ou les ports du produit. x Si de l'eau ou toute autre substance pénètre dans le produit, veillez à mettre le produit hors tension et débrancher le cordon d'alimentation, puis contactez un centre de maintenance. x et ce afin d'éviter tout risque de défaillance, d'électrocution ou d'incendie.9 Mise en route Français Ne posez pas de contenant liquide (vase, pot de fleur, boisson, article cosmétique, médicament, etc.) ou d'objet métallique sur le produit x Si de l'eau ou toute autre substance pénètre dans le produit, veillez à mettre le produit hors tension et débrancher le cordon d'alimentation, puis contactez un centre de maintenance, x et ce afin d'éviter tout risque de défaillance, d'électrocution ou d'incendie. Veillez à ne pas appuyer trop fort sur le produit, cela risquerait de déformer ou d'endommager le produit. Attention ! L'affichage de la même image pendant plusieurs heures risque d'entraîner l'apparition d'une image rémanente ou d'une tache. x Si le produit doit rester inutilisé pendant un long moment, activez le mode économie d'énergie ou l'économiseur d'écran. -_- ! Si vous êtes absent de votre domicile et que vous laissez le produit inutilisé pendant une longue période, débranchez le cordon d'alimentation du secteur, x et ce afin d'écarter tout risque d'incendie pouvant résulter d'une accumulation de poussière, d'une surchauffe, d'un choc ou d'un court-circuit électrique. ! Pour préserver vos yeux, x configurez la résolution et la fréquence appropriées du produit. Pour éviter tout risque de chute du produit et de dégât matériel ou de blessure personnelle, x n'orientez pas ou ne maintenez pas le produit de haut en bas par son support. ! Regarder l'écran en continu de trop près risque de détériorer votre vision. Afin d'éviter tout risque d'électrocution ou d'incendie, x ne placez pas le produit près d'un humidificateur ou d'une cuisinière. ! Afin de laisser reposer vos yeux, x veillez à vous éloigner de l'écran pendant au moins cinq minutes par heure. Ne touchez pas le produit lorsque le produit est sous tension depuis plusieurs heures car le panneau d'affichage chauffe.10 Mise en route Français ! Conservez les accessoires de petite taille dans un endroit que les enfants ne peuvent pas atteindre. ! Pour éviter de vous faire mal à la main ou au doigt, x réglez avec précaution l'inclinaison du produit ou la hauteur du support. x Une inclinaison excessive du produit risque d'entraîner sa chute ou de blesser quelqu'un. Afin d'éviter tout risque de dégât ou de blessure, x évitez de poser des objets lourds sur le produit. N'augmentez pas trop le volume lorsque vous portez votre casque ou des écouteurs. x Une exposition à un volume sonore trop élevé risque d'altérer votre audition. Veillez à ce que les enfants ne portent pas les piles à la bouche lorsque vous les retirez de la télécommande. À cet effet, rangez-les dans un endroit que les enfants ne peuvent pas atteindre. x Si un enfant a ingéré une pile ou l'a mise à la bouche, contactez immédiatement votre médecin. ! Remplacez les piles en respectant les polarités (+, -). x Sinon, suite à une fuite du liquide interne, la pile risque de s'abîmer, de provoquer un incendie, des blessures corporelles ou des dégâts matériels. Assurez-vous d'utiliser le type de pile standard indiqué. Pour écarter tout risque d'incendie, de blessure personnelle ou de contamination pouvant résulter d'une explosion ou d'une fuite interne du fluide des piles, x n'utilisez pas simultanément des piles neuves et usagées. ! Veillez à disposer de vos piles usagées (y compris les piles rechargeables) dans un conteneur prévu pour le recyclage. Il appartient au client de rapporter les piles usagées ou rechargeables à son centre de recyclage. x Cela peut être un centre de recyclage public local ou un magasin qui vend le même type de pile (rechargeable ou pas).11 Mise en route Français Accessoires ✎Assurez-vous que les composants suivants sont fournis avec votre moniteur LED. Si l'une des pièces manque, contactez votre revendeur. ✎Les couleurs et formes des pièces peuvent varier selon les modèles. ✎Les câbles non fournis dans l'emballage peuvent être achetés séparément. ✎Lorsque vous ouvrez le carton d'emballage, assurez-vous d'identifier et de récupérer toutes les pièces. [ATTENTION : INSÉREZ FERMEMENT DE MANIÈRE À CE QU'IL NE SE DÉTACHE PAS x Manuel d'utilisation x Guide de configuration rapide x Télécommande et piles (AAA x 2) x Chiffon de nettoyage x Carte de garantie / Guide de prévention (non disponible partout) x Cordon d'alimentation y Connecteur de support y Socle de support y Câble D-Sub y Câble stéréo Câbles d'entrée (vendus séparément) y Câble HDMI/DVI y Câble audio y Câble composant y Câble optique y Câble HDMI12 Mise en route Français Affichage du Panneau de commande ✎La couleurs et la forme peuvent varier selon les modèles. SOURCE E Permet de choisir toutes les sources d'entrée disponibles. Utilisez ce bouton pour le menu à l'écran de la même façon que le bouton ENTERE de la télécommande. MENU Affiche un menu à l'écran, l'OSD (affichage à l'écran) des fonctions de votre moniteur LED. Y Règle le volume. Dans l'OSD, utilisez les boutons Y de la même façon que les boutons z l et r de la télécommande. Change de chaîne. Dans l'OSD, utilisez les boutons z de la même façon que les boutons u et d de la télécommande. P (Alimentation) Allume ou éteint le moniteur LED. Témoin d'alimentation Clignote et s'éteint lorsque le produit est sous tension et s'allume en mode veille. Capteur de télécommande Dirigez la télécommande vers ce point du moniteur LED. Mode veille Ne laissez pas votre moniteur LED en mode veille pendant de longues périodes (lorsque vous partez en vacances, par exemple). En effet, une petite quantité d'électricité est consommée même lorsque le produit est éteint. Il est préférable de débrancher le cordon d'alimentation. Panneau de commande13 Mise en route Français Télécommande ✎Ceci est une télécommande spéciale destinée aux malvoyants. Elle dispose de points Braille sur les boutons de chaînes et de numéros. Installation des piles (type de pile : AAA) Allume ou éteint le téléviseur. Accès direct aux chaînes. Permet de sélectionner Teletext ON, Double, Mix ou OFF. Affiche Content Home, qui inclut Liste des chaînes, Guide, Media Play, Gestionnaire prog. et Source. Sélection rapide de fonctions fréquemment utilisées. Affiche le principal menu à l'écran. Revient au menu précédent. PIP : Active ou désactive le PIP (incrustation d'image). P.SIZE : Sélectionne le Format de l'image. AD/SUBT. : Active ou désactive la description audio (qui n'est pas disponible partout). / Affiche les sous-titres numériques. Déplace le curseur et sélectionne un élément. Confirme le paramètre choisi. Utilisez ces boutons en fonction des instructions à l'écran. Règle le volume. Affiche et sélectionne les sources vidéo disponibles. Revient à la chaîne précédente. Coupe temporairement le son. Affiche les listes de chaînes à l'écran. Affiche l'EPG (Guide électronique des programmes). Affiche des informations à l'écran. Quitte le menu. Utiliser ces boutons en mode Media Play. Change de chaîne.Français 14 Connexions Connexion à une antenne Lors de la mise en marche initiale du moniteur LED, les paramètres de base sont configurés automatiquement. ✎Préinitialisation : raccordement au réseau et à l'antenne. ANT OUT Alimentation Configuration (Configuration initiale) Lors de la mise en marche initiale du moniteur LED, une série d'écrans d'instructions vous guident dans la configuration des paramètres de base. Appuyez sur le bouton POWERP. La Configuration n'est disponible que lorsque l'entrée Source est définie sur TV. ✎Avant d'allumer le moniteur LED, assurez-vous que le câble d'antenne est connecté. 1 Sélection de la langue des menus Appuyez sur le bouton u ou d pour sélectionner la langue des menus. Une fois que 2 ou Sélection de Util. domicile Util. magasin vous avez choisi la langue voulue, appuyez deux fois sur le bouton Appuyez sur le bouton x Sélectionnez le mode u ou Util. domicile d, puis sur le bouton . Le mode Util. magasin ENTERE. est destiné aux points ENTERE. P de vente. x Pour passer du mode Util. magasin à Util. domicile (standard) : appuyez sur le bouton de réglage du volume sur le moniteur LED. Lorsque vous voyez s'afficher l'OSD du volume, appuyez sur MENU pendant 5 secondes. x Le mode Util. magasin est adapté à l'exposition en magasin. En le sélectionnant, vous ne pourrez pas accéder à un certain nombre de fonctions. Choisissez Util. domicile pour bénéficier de toutes les fonctions de votre téléviseur chez vous. 3 Sélection d'une zone Appuyez sur le bouton ENTERE. Appuyez sur le bouton u ou d pour sélectionner la zone appropriée. Appuyez sur le bouton ENTERE pour valider votre choix. 4 Recherche automatique Appuyez sur le bouton u ou d pour sélectionner l'option adéquate, puis deux fois sur le bouton ENTERE. x J'utilise un câble aérien. Mémorisez tous les canaux disponibles à l'aide du câble RF. (Recherche automatique obligatoire) x J’utilise un boitier externe. Vous n'avez pas besoin d'utiliser la Recherche automatique pour trouver les chaînes. ✎ Pour effectuer la Configuration, sélectionnez cette option. x Hertzien / Câble : sélectionnez la source d'antenne à mémoriser. Numér. et Anal. / Numérique / Analogique: sélectionnez la source du canal à mémoriser. ✎ Vous trouverez des détails supplémentaires à la page 22. 5 Réglage du Mode Horloge Réglez automatiquement ou manuellement le Mode Horloge. x Auto. : sélectionne le fuseau horaire (en fonction du pays où vous vous trouvez). x Manuel : permet de régler manuellement la date et l'heure. ✎ Si le client choisit J’utilise un boitier externe. à l'étape 4, l'horloge se règle manuellement. 6 Complet Appuyez sur le bouton ENTERE. Pour réinitialiser cette fonctionnalité... Sélectionnez Système - Configuration (Configuration initiale). Saisissez votre code PIN à 4 chiffres. La valeur par défaut est 0-0-0-0. Pour changer de code PIN, utilisez la fonction Modifier PIN. Nous vous conseillons d'exécuter la procédure Configuration (MENU → Système) même si cela a déjà été fait en magasin. ✎Si vous oubliez votre code PIN, appuyez sur les boutons de la télécommande dans l'ordre suivant en mode veille, ce qui permet de remettre à zéro le code PIN (0-0-0-0) : POWER (arrêt) → MUTE → 8 → 2 → 4 → POWER (marche).Français 15 Connexions Connexion à un périphérique audio/vidéo Utilisation d'un câble HDMI ou HDMI/DVI (jusqu'à 1080p) Périphériques disponibles : DVD, lecteur Blu-ray, décodeur HD, récepteur satellite HD STB (terminal numérique), magnétoscope ✎HDMI IN (DVI) / PC/DVI AUDIO IN x Si un câble HDMI / DVI est connecté au port HDMI IN(DVI), le son ne fonctionne pas. x Si un périphérique externe qui utilise une version antérieure du mode HDMI est connecté au moniteur LED, l'image risque de ne pas s'afficher normalement (ou peut-être même pas du tout). En cas de problème, contactez le fabricant du périphérique pour savoir quelle version HDMI est utilisée et, si cette dernière est obsolète, demandez une mise à niveau. x Assurez-vous d'acheter un câble HDMI certifié. Sinon, il se peut que l'image ne s'affiche pas ou qu'une erreur de connexion se produise. x Il est recommandé d'utiliser un câble HDMI de base à haut débit ou un câble Ethernet. Ce produit ne prend pas en charge la fonction Ethernet via HDMI. Utilisation d'un câble Péritel Périphériques disponibles : DVD, Magnétoscope ✎En mode Ext., la sortie DTV prend uniquement en charge le signal MPEG SD vidéo et audio. DVI OUT HDMI OUT AUDIO OUT W R DVD / Lecteur Blu-ray DVD / Lecteur Blu-ray EXT (RGB) EXT Magnétoscope / DVDFrançais 16 Connexions Utilisation d'un câble composant (jusqu'à 1080p) ou audio/vidéo (480i uniquement) Périphériques disponibles : DVD, lecteur Blu-ray, décodeur, récepteur satellite STB, magnétoscope PR PB COMPONENT / AV IN R W R AUDIO OUT R-AUDIO-L VIDEO OUT R W R B G R W R B G R W W W R B R R G Y Y AUDIO OUT R-AUDIO-L COMPONENT OUT PR PB Y R W Y ✎Pour la connexion à AV IN, la prise AV IN [Y/VIDEO] est verte alors que le câble vidéo est jaune. ✎Pour une meilleure qualité d'image, nous recommandons la connexion Composant (de préférence à la connexion A/V). Connexion à un emplacement COMMON INTERFACE (interface commune) (utilisée uniquement en Europe, en Turquie, en Algérie, en Afrique du Sud et dans la zone de la CEI) Utilisation de la carte CI ou CI+ Pour regarder des chaînes payantes, vous devez insérer la carte CI ou CI+. x Si vous n'insérez pas la carte CI ou CI+, un message de type « Signal brouillé » s'affichera pour certaines chaînes. x Les informations de couplage contenant un numéro de téléphone, l'ID de la carte CI ou CI+, l'ID de l'hôte et d'autres informations s'affichent au bout de 2 à 3 minutes. En cas d'affichage d'un message d'erreur, adressez-vous à votre prestataire de service. x Une fois que la procédure de configuration des informations sur les canaux est terminée, un message de type « Mise à jour terminée » apparaît à l'écran, indiquant que la liste des canaux est mise à jour. ✎REMARQUE x Vous devez vous procurer une carte CI ou CI+ auprès d'un câblo-opérateur local. x La carte CI ou CI+ est fragile ; veillez à ne pas la laisser tomber lorsque vous la retirez de son logement. x Insérez la carte CI ou CI+ en respectant le sens indiqué sur la carte. x L'emplacement COMMON INTERFACE peut varier selon le modèle utilisé. x Vérifiez auprès de votre revendeur agréé si la carte CI ou CI+ est prise en charge dans votre pays ou région. x En cas de problème, adressez-vous à un prestataire spécialisé. x Insérez la carte CI ou CI+ qui prend en charge les paramètres d'antenne courants. L'écran sera déformé ou invisible. Câble audio (Non fourni) Câble vidéo (Non fourni) Câble audio (Non fourni) Rouge Blanc Rouge Bleu Vert Rouge Blanc Jaune Périphérique Périphérique Câble composant (non fourni)Français 17 Connexions Système audionumérique Connexion à un périphérique audio et à un PC Utilisation d'une connexion optique (numérique) ou pour écouteurs DIGITAL AUDIO OUT (OPTICAL) Les écrans série TB300 ne disposent pas de connecteur pour écouteurs ni d'interface optique. ✎DIGITAL AUDIO OUT (OPTICAL) x Si un appareil audionumérique est connecté à la prise DIGITAL AUDIO OUT (OPTICAL), baissez le volume à la fois sur le moniteur LED et sur l'appareil. x Le mode 5.1 CH (canal) audio n'est disponible que si le moniteur LED est connecté à un périphérique externe prenant en charge cette norme. x Lorsque le récepteur (home cinéma) est allumé, vous pouvez entendre le son provenant de la prise optique du téléviseur. Si le téléviseur reçoit un signal DTV, il émet un son de qualité 5.1 CH vers le récepteur de home cinéma. Si la source est un composant numérique de type DVD / lecteur Blu-ray / décodeur / récepteur satellite HD STB (terminal numérique) et qu'elle est connectée au téléviseur via HDMI, seule la sortie audio 2 CH est disponible sur le récepteur de home cinéma. * Pour bénéficier de la qualité sonore 5.1 CH, connectez la prise audio numérique de votre DVD / lecteur Blu-ray / décodeur / récepteur satellite STB directement à un amplificateur ou un home cinéma. ✎Casque H: Vous pouvez brancher votre casque à la sortie casque de votre téléviseur. Lorsque le casque est connecté, le son provenant des haut-parleurs intégrés est coupé. x Il se peut que la fonction son soit limitée lorsque le casque est branché au moniteur LED. x Le volume du casque et le volume du moniteur LED se règlent séparément. Utilisation d'un câble HDMI, d'un câble HDMI / DVI ou d'un câble D-sub ✎Selon le modèle de PC utilisé, la connexion par câble HDMI risque de ne pas être prise en charge. Câble HDMI (Non fourni) Câble HDMI / DVI (Non fourni) Câble stéréo Câble stéréo Câble D-Sub Français 18 Connexions Modes d'affichage (D-Sub et Entrée HDMI/DVI) Résolution optimale : 1366 x 768 pixels (modèle T19B300 uniquement) Mode d'affichage Fréquence horizontale (kHz) Fréquence verticale (Hz) Horloge de pixels (MHz) Polarité de Mode Résolution synchronisation (H/V) IBM 720 x 400 70Hz 31,469 70,087 28,322 -/+ VESA DMT 640 x 480 60Hz 31,469 59,940 25,175 -/- MAC 640 x 480 67Hz 35,000 66,667 30,240 -/- VESA DMT 640 x 480 72Hz 37,861 72,809 31,500 -/- VESA DMT 640 x 480 75Hz 37,500 75,000 31,500 -/- VESA DMT 800 x 600 60Hz 37,879 60,317 40,000 +/+ VESA DMT 800 x 600 72Hz 48,077 72,188 50,000 +/+ VESA DMT 800 x 600 75Hz 46,875 75,000 49,500 +/+ MAC 832 x 624 75Hz 49,726 74,551 57,284 -/- VESA DMT 1024 x 768 60Hz 48,363 60,004 65,000 -/- VESA DMT 1024 x 768 70Hz 56,476 70,069 75,000 -/- VESA DMT 1024 x 768 75Hz 60,023 75,029 78,750 +/+ VESA DMT 1280 x 720 60Hz 45,000 60,000 74,250 +/+ VESA DMT 1366 x 768 60Hz 47,712 59,790 85,500 +/+ Résolution optimale : 1920 x 1080 pixels Mode d'affichage Fréquence horizontale (kHz) Fréquence verticale (Hz) Horloge de pixels (MHz) Polarité de synchronisation (H/V) Mode Résolution IBM 720 x 400 70Hz 31,469 70,087 28,322 -/+ VESA DMT 640 x 480 60Hz 31,469 59,940 25,175 -/- MAC 640 x 480 67Hz 35,000 66,667 30,240 -/- VESA DMT 640 x 480 72Hz 37,861 72,809 31,500 -/- VESA DMT 640 x 480 75Hz 37,500 75,000 31,500 -/- VESA DMT 800 x 600 60Hz 37,879 60,317 40,000 +/+ VESA DMT 800 x 600 72Hz 48,077 72,188 50,000 +/+ VESA DMT 800 x 600 75Hz 46,875 75,000 49,500 +/+ MAC 832 x 624 75Hz 49,726 74,551 57,284 -/- VESA DMT 1024 x 768 60Hz 48,363 60,004 65,000 -/- VESA DMT 1024 x 768 70Hz 56,476 70,069 75,000 -/- VESA DMT 1024 x 768 75Hz 60,023 75,029 78,750 +/+ VESA DMT 1152 x 864 75Hz 67,500 75,000 108,000 +/+ MAC 1152 x 870 75Hz 68,681 75,062 100,000 -/- VESA DMT 1280 x 720 60Hz 45,000 60,000 74,250 +/+ VESA DMT 1280 x 800 60Hz 49,702 59,810 83,500 -/+ VESA DMT 1280 x 1024 60Hz 63,981 60,020 108,000 +/+ VESA DMT 1280 x 1024 75Hz 79,976 75,025 135,000 +/+ VESA DMT 1366 x 768 60Hz 47,712 59,790 85,500 +/+ VESA DMT 1440 x 900 60Hz 55,935 59,887 106,500 -/+ VESA DMT 1600 x 900 RB 60Hz 60,000 60,000 108,000 +/+ VESA DMT 1680 x 1050 60Hz 65,290 59,954 146,250 -/+ VESA DMT 1920 x 1080 60Hz 67,500 60,000 148,500 +/+ ✎REMARQUE x Le mode entrelacement n'est pas pris en charge. x Le poste risque de fonctionner de façon anormale si un format vidéo non-standard est sélectionné. x Les modes Séparé et Composite sont pris en charge. La synchronisation sur le vert (SOG) n'est pas prise en charge.Français 19 Connexions Fonctionnalités de base Comment naviguer dans les menus Avant d'utiliser le moniteur LED, prenez connaissance des descriptifs ci-dessous pour apprendre à naviguer dans le menu, ainsi que pour sélectionner et régler un certain nombre de fonctions. 1 ENTERE / Boutons fléchés : Déplace le curseur et sélectionne un élément. Confirme le paramètre choisi. 2 Bouton RETURN : Revient au menu précédent. 3 Bouton MENU : Affiche le principal menu à l'écran. 4 Bouton EXIT : quitte le menu à l'écran. Comment utiliser l'OSD (affichage à l'écran) L'étape d'accès peut varier selon le menu sélectionné. 1 MENU m Les options du menu principal s'affichent à l'écran : Image, Son, Canal, Système, Assistance. 2 ▲ / ▼ Sélectionnez une icône avec le bouton ▲ ou ▼. 3 ENTERE Appuyez sur le bouton ENTERE pour accéder au sous-menu. 4 ▲ / ▼ Sélectionnez le sous-menu de votre choix avec le bouton ▲ ou ▼. 5 ◄ / ► Réglez la valeur d'un élément avec le bouton ◄ ou ►. Les procédures de réglage dans l'OSD peuvent varier selon le menu sélectionné. 6 ENTERE Appuyez sur ENTERE pour terminer la configuration. 7 EXIT e Appuyez sur EXIT. Changement de source d'entrée Source SOURCE s→ Source Permet de sélectionner le moniteur LED ou une source d'entrée externe de type suivant : DVD / lecteur Blu-ray / décodeur / récepteur satellite STB. ■ TV / Ext. / PC / HDMI/DVI / AV / Composant ✎DansSource, les entrées connectées sont mises en évidence. ✎TV, PC et Ext. restent toujours activées. Modification de nom SOURCEs→ TOOLST → Modif. Nom → ENTERE Dans Source, appuyez sur le bouton TOOLST, puis définissez le nom de source d'entrée externe de votre choix. ■ Magnétoscope / DVD / Décodeur Câble / Décodeur satellite / Décodeur PVR / Récepteur AV / Jeux / Caméscope / PC / DVI PC / Périph. DVI / TV / IPTV / Blu-ray / HD DVD / DMA : afin de faciliter la sélection de votre source, nommez le périphérique connecté à la prise d'entrée. ✎Lorsque vous connectez un PC au port HDMI IN (DVI) avec le câble HDMI / DVI, vous devez régler le moniteur LED en mode PC sous Modif. Nom. ✎Lorsque vous connectez un PC au port HDMI IN (DVI) avec le câble HDMI / DVI, vous devez régler le moniteur LED en mode DVI PC sous Modif. Nom. ✎Lorsque vous connectez un périphérique audio/vidéo au port HDMI IN (DVI) avec le câble HDMI / DVI, vous devez régler le moniteur LED en mode Périph. DVI sous Modif. Nom. Information SOURCEs→ TOOLST→ Information → ENTERE Permet d'afficher des informations détaillées sur le périphérique externe sélectionné. 2 4 3 1Français 20 Fonctionnalités de base Utilisation du bouton INFO (Guide Now & Next) Le moniteur identifie le canal en cours et le statut de certains paramètres audio-vidéo. Le guide Now & Next affiche des informations sur les programmes quotidiens pour chaque chaîne en fonction de l'heure de diffusion. x Faites défiler l / r pour afficher des informations sur le programme de votre choix tout en regardant la chaîne en cours de diffusion. (Dépend des chaînes sélectionnées.) x Faites défiler u / d pour afficher des informations sur d'autres chaînes. Pour passer à la chaîne en cours de diffusion, appuyez sur le bouton ENTERE. • L'image affichée peut varier selon le modèle utilisé. Aucune information détaillée. Aucun titre 576i 4:3 SD Italien Stéréo a Information 17.02 Mar 19 jui TV TNT Tous Coming Soon 5 Utilisation du menu Canal Appuyez sur le bouton CONTENT pour sélectionner Content Home, puis choisissez le menu que vous souhaitez utiliser. Chaque écran s'affiche. • L'image affichée peut varier selon le modèle utilisé. Content Home Liste des chaînes Guide Media Play Gestionnaire prog. Source R Retour Guide CONTENT → Content Home → Guide → ENTERE Les informations relatives au guide électronique des programmes (EPG, Electronic Programme Guide) sont fournies par les émetteurs. En vous servant des horaires que vous envoient les émetteurs, vous choisissez à l'avance les programmes que vous souhaitez regarder, de sorte que la chaîne du programme choisi s'affiche automatiquement à l'heure indiquée. Selon le statut de la chaîne, un écran blanc ou sans rapport avec le programme choisi risque de s'afficher. Utilisation de la Vue chaînes x a Rouge (Gestion. prog.) : affiche le Gestionnaire prog. x b Vert (-24 heures) : affiche la liste des programmes devant être diffusés avant 24 heures. x { Jaune (+24 heures) : affiche la liste des programmes devant être diffusés dans un délai supérieur à 24 heures. x } Bleu (Mode CH) : sélectionne le type de chaînes que vous souhaitez voir apparaître dans la fenêtre Vue chaînes. x ` (Information) : affiche les détails du programme sélectionné. x k (Page) : affichez la page suivante ou la page précédente. x E (Regarder / Programmer) – Lors de la sélection du programme, vous pouvez voir s'afficher le programme sélectionné. – Lors de la sélection d'un programme que vous regarderez plus tard, vous pouvez planifier de regarder ce programme. Pour annuler la programmation, appuyez de nouveau sur le bouton ENTERE et sélectionnez Annuler prog.. Gestionnaire prog. CONTENT → Content Home → Gestionnaire prog. → ENTERE Vous pouvez regarder, modifier ou supprimer une chaîne que vous avez prévu de regarder. Utilisation de la fonction Programmer visionnage Vous pouvez paramétrer l'affichage automatique de la chaîne de votre choix à l'heure souhaitée. Réglez d'abord l'heure en cours avant d'utiliser cette fonction. 1. Appuyez sur le bouton ENTERE pour sélectionner Gestionnaire prog. 2. Appuyez sur le bouton TOOLST ou or a pour ajouter un programme à programmer manuellement. L'écran Programmer visionnage apparaît. 3. Appuyez sur les boutons u / d / l / r pour régler les paramètres Antenne, Canal, Répétition, Date ou Heure de début. • L'image affichée peut varier selon le modèle utilisé. IL MEDICO E LO STREGONE TV TNT 6 R4 DTT 16:55 - 17:55 IL MEDICO E LO STREGONE - 2 TEMPO a Gestion. prog. b -24 heures { +24 heures } Mode CH ` Information k Page E Regarder Auj. 17:00 17:30 18:00 18:30 Guide 17.00 Mar 19 jui Vue chaînes - Tous Aucune information Aucune information Aucune information Aucune information IL MEDICO E LO STREGONE 1 1futech 2 24ore.tv 3 BBC World 4 Class News 5 Coming Soon 6 R4 DTT Aucune information TG 4 Aucune information 5 Coming SoonFrançais 21 Fonctionnalités de base x Antenne : sélectionnez la source d'antenne de votre choix. x Canal : sélectionnez le canal de votre choix. x Répétition : Sélectionnez Une fois, Manuel, Sam~Dim, Lun~Ven ou Quotid. selon votre préférence. Pour paramétrer le jour que vous souhaitez, sélectionnez Manuel. ✎ Le symbole c indique que la date est sélectionnée. x Date : vous pouvez régler la date de votre choix. ✎ La fonction est disponible lorsque vous sélectionnez Une fois dans Répétition. x Heure de début : vous pouvez régler l'heure de début que vous souhaitez. ✎ L'écran Information vous permet de modifier ou d'annuler une information réservée. x Annuler prog. : annulez une émission que vous avez prévu de regarder. x Editer : changez l'émission que vous avez prévu de regarder. x Retour : revient à l'écran précédent. Liste des chaînes CONTENT → Liste des chaînes → ENTERE Vous pouvez afficher toutes les chaînes recherchées. • L'image affichée peut varier selon le modèle utilisé. Liste des chaînes Tous 1 1futech 2 24ore.tv 3 BBC World 4 Class News 5 Coming Soon 6 R4 DTT IL MEDICO E LO STREGONE a1 C2 a2 C4 T Outils L Mode CH E Regarder k Page ✎Lorsque vous appuyez sur le bouton CH LIST de la télécommande, Liste des chaînes s'affiche immédiatement. Utilisation des boutons de commande avec la Liste des chaînes. ■ T (Outils) : Appuyez sur le bouton Tools pour accéder aux fonctions suivantes. x Vue progr. : appuyez sur les boutons u/d pour sélectionner le programme voulu, puis appuyez sur le bouton ENTERE. (pour les chaînes NUMERIQUES uniquement) x Modif. favoris : paramétrez les chaînes que vous regardez le plus souvent comme vos chaînes préférées. ✎ Sélectionnez la fonction Modif. favoris, puis appuyez sur le bouton ENTERE. – Si la chaîne fait déjà partie de vos chaînes favorites, la fonction Modif. favoris apparaît. x Verrouil. / Déverr. : verrouille une chaîne de sorte qu'elle ne peut ni être sélectionnée ni être regardée. ✎ Cette fonction n'est disponible que si la fonction Verr. chaîne est activée. ✎ L'écran de saisie du code PIN apparaît. Saisissez votre code PIN à 4 chiffres ; la valeur par défaut est 0-0-0-0. L'option Modifier PIN vous permet de changer de code PIN. x Modifi. nom de chaîne (chaînes analogiques uniquement): affectez un nom à votre chaîne. ✎ Cette fonction peut ne pas être opérationnelle dans certaines zones. x Modif. num. chaîne : Modifier le numéro en appuyant sur les boutons souhaités. ✎ Cette fonction peut ne pas être opérationnelle dans certaines zones. x Supprimer : vous pouvez supprimer une chaîne pour afficher les chaînes que vous souhaitez. x Information : affichez le nom de la chaîne, la résolution, le mode d'image, la langue, etc. (Certaines options ne sont disponibles que pour la télévision numérique.) x Trier : modifiez la liste classée par nom ou par numéro de chaîne. (pour les chaînes NUMERIQUES uniquement) x Changer antenne : sélectionnez Hertzien ou Câble. x Mode édit. : vous pouvez sélectionner les chaînes de votre choix et apporter des modifications. ■ l r (Mode CH) : choisissez le type de chaînes que vous souhaitez afficher à l'écran Liste des chaînes. ✎ Cette option peut varier selon le pays d'utilisation. ■ E (Regarder / Information) : regardez la chaîne que vous sélectionnez. Affiche les détails du programme sélectionné. ■ k (Page) : affichez la page suivante ou la page précédente. Utilisation de la fonction Programmer visionnage dans la Liste des chaînes (dépend des chaînes disponibles) Si vous paramétrez la fonction Programmer visionnage dans la Liste des chaînes, vous ne pouvez régler le programme que dans la Vue progr. 1. Appuyez sur le bouton CH LIST, puis sélectionnez le canal numérique de votre choix. 2. Appuyez sur le bouton TOOLST et sélectionnez Vue progr. 3. Appuyez sur les boutons u / d pour sélectionner le programme voulu, puis appuyez sur le bouton E (Information). 4. Sélectionnez Programmer visionnage, puis appuyez sur le bouton ENTERE pour terminer la procédure. ✎Pour annuler la fonction Programmer visionnage, suivez les étapes 1 à 3. Sélectionnez ensuite Annuler prog..Français 22 Fonctionnalités de base Menu Canal ¦ Réglage des chaînes MENUm→ Canal → ENTERE Avant que votre télévision puisse commencer à mémoriser les canaux Antenne (Hertzien / Câble)t disponibles, vous devez indiquer le type de source de signal que reçoit le moniteur LED. Pays (dépend du pays d'utilisation) L'écran de saisie du code PIN apparaît. Saisissez votre code PIN à 4 chiffres. ✎Sélectionnez votre pays afin que le moniteur LED puisse régler automatiquement les canaux de diffusion. ■ Chaîne numérique : Permet de changer de pays pour les chaînes numériques. ■ Chaîne analogique : Permet de changer de pays pour les chaînes analogiques. Recherche automatique (dépend du pays d'utilisation) ✎Les numéros de programme automatiquement attribués peuvent ne pas correspondre aux numéros réels ou souhaités. Si une chaîne est verrouillée par la fonction Verr. chaîne, la fenêtre de saisie du code PIN apparaît. ■ Recherche automatique – Hertzien / Câble : sélectionnez la source d'antenne à mémoriser. Numér. et Anal. / Numérique / Analogique: sélectionnez la source du canal à mémoriser. ✎ Si vous sélectionnez Câble → Numér. et Anal. ou Numérique : entrez une valeur pour la recherche de chaîne câblée par balayage. x Mode de rech.(Complet / Réseau / Rapide) : sélectionne les paramètres du Mode de rech. parmi Complet / Réseau / Rapide. x Réseau (Auto. / Manuel) : sélectionne l'ID réseau dans Auto. ou Manuel. x ID réseau : si la fonction Réseau est réglée sur Manuel, vous pouvez paramétrer l'ID réseau avec les boutons numériques. x Fréquence : affiche la fréquence de la chaîne (spécifique à chaque pays). x Modulation : affiche les valeurs de modulation disponibles. x Taux de symbole : affiche les taux de symbole disponibles. ■ Option de rech. de câble (dépend du pays d'utilisation) Permet de régler les options de recherche supplémentaires d'un réseau câblé, telles que la fréquence et le taux de symbole. – Fréq. de départ / Fréquence de fin.: réglez la fréquence de démarrage ou d'arrêt (spécifique à chaque pays). – Taux de symbole : affiche les taux de symbole disponibles. – Modulation : affiche les valeurs de modulation disponibles. Recherche manuelle Recherche les chaînes manuellement par balayage et les enregistre dans le moniteur LED. ✎Si une chaîne est verrouillée par la fonction Verr. chaîne, la fenêtre de saisie du code PIN apparaît. ■ Réglage des chaînes numériques : recherche des chaînes numériques par balayage. 1. Appuyez sur le bouton ENTERE pour sélectionner Nouveau. ✎ Lorsque vous sélectionnez Antenne → Hertzien : Canal, Fréquence, Bande passante ✎ Lorsque vous sélectionnez Antenne → Câble : Fréquence, Modulation, Taux de symbole 2. Appuyez sur le bouton d pour sélectionner Rech.. Lorsque le balayage est terminé, la chaîne apparaît dans la liste des chaînes. ■ Réglage des chaînes analogiques : recherchepar balayage des chaînes analogiques. 1. Appuyez sur le bouton ENTERE pour sélectionner Nouveau. 2. Réglez les fonctions Programme, Système de Couleur, Système Sonore, Canal et Rech.. 3. Appuyez sur le bouton d pour sélectionner Mémoriser. Lorsque le balayage est terminé, la chaîne apparaît dans la liste des chaînes. Transf. liste chaînes L'écran de saisie du code PIN apparaît. Saisissez votre code PIN à 4 chiffres. Importe ou exporte la table des chaînes. Pour utiliser cette fonction, vous devez connecter un périphérique de stockage USB. ■ Importer depuis le périphérique USB : importez la liste des chaînes depuis le périphérique USB. ■ Exporter vers le périphérique USB : exportez la liste des chaînes vers le périphérique USB. Cette fonction n'est disponible que si le périphérique USB est connecté. ✎Le format USB doit être FAT32. Réglage fin (chaînes analogiques uniquement) Si la réception est nette, vous n'avez pas besoin de régler la chaîne avec précision, car ce réglage est effectué automatiquement lors de l'opération de recherche et d'enregistrement. Si le signal est faible ou déformé, réglez manuellement la chaîne avec précision. Faites défiler vers la gauche ou la droite jusqu'à ce que l'image soit nette. ✎Les paramètres sont appliqués à la chaîne que vous êtes en train de regarder. ✎Les chaînes réglées qui ont été enregistrées sont marquées d'un astérisque “*” à droite du numéro de chaîne dans le bandeau de navigation. ✎Pour réinitialiser le réglage fin, sélectionnez Réinit..Français 23 Fonctionnalités de base Menu Image ¦ Changement du mode d'image prédéfini MENUm→ Image → Mode Image → ENTERE Sélectionnez votre type d'image préférée. Mode Image t ✎Lorsque vous vous connectez à un PC, le Mode Image est disponible uniquement avec les options Standard et Loisirs. ■ Dynamique : adapté à une pièce où la luminosité est forte. ■ Standard : adapté à une pièce où la luminosité est normale. ■ Cinéma : adapté à une pièce sombre permettant de regarder des films. ■ Loisirs : adapté pour regarder des films et jouer à des jeux. ✎ Cette fonction n'est disponible que pour utilisation sur un PC connecté. ¦ Réglage des paramètres d'image MENUm→ Image → ENTERE Samsung MagicAngle Réglez l'angle de vision de l'écran de façon à optimiser votre position de visualisation. ■ Samsung MagicAngle : En fonction de votre position par rapport à l'écran, vous pouvez bénéficier d'une qualité d'image optimale quel que soit l'angle de vision en paramétrant le mode approprié. x Arrêt : à sélectionner lorsque vous vous trouvez en face de l'écran. x Mode Penché : à sélectionner lorsque vous vous trouvez dans une position inférieure par rapport à l'écran. x Mode Debout : à sélectionner lorsque vous vous trouvez dans une position surélevée par rapport à l'écran. ■ Mode : réglage de l'angle de vision de l'écran. ✎Lorsque Samsung MagicAngle est paramétré sur Mode Penché ou Mode Debout, la fonction Gamma n'est pas disponible. Rétroéclairage / Contraste / Luminosité / Netteté / Couleur / Teinte (V/R) Votre téléviseur est doté de plusieurs options de réglage de la qualité de l'image. ✎REMARQUE x En mode TV, PC ou AV analogique du système PAL, la fonction Teinte (V/R) n'est pas disponible. x Lorsque vous connectez un PC au téléviseur, vous pouvez uniquement régler les fonctions Rétroéclairage, Contraste, Luminosité et Netteté. x Les paramètres peuvent être réglés et enregistrés pour chaque périphérique externe connecté au moniteur LED. x Une luminosité de l'image moins forte permet de réduire la consommation d'énergie. Réglage de l'écran ■ Format de l'image : Votre décodeur / antenne de réception satellite peut également disposer de son propre jeu de réglages du format de l'image. Cependant, il est vivement recommandé d'utiliser le mode 16:9 dans la plupart des cas. 16:9 Auto : règle automatiquement le format de l'image en 16:9. 16:9: règle l'image au format 16:9. Zoom large : agrandit la taille de l'image (format supérieur à 4:3). ✎ Réglez la Position via les boutons u / d. Zoom : agrandit l'image au format 16:9 sur le plan vertical afin qu'elle s'ajuste à la dimension de l'écran. ✎ Réglez les fonctions Zoom ou Position avec le bouton u / d. 4:3: règle l'image sur le mode de base (4:3). ✎ Évitez de regarder l'image au format 4:3 pendant plusieurs heures. L'apparition de traces de bordures sur la gauche, la droite et au centre de l'écran risque de provoquer un phénomène de rémanence des images (brûlures) qui n'est pas couvert par la garantie. Adapter à l’écran : l'image s'affiche à l'écran sans être tronquée avec la réception de signaux HDMI (720p / 1080i / 1080p) ou Composant (720p / 1080i / 1080p). ✎ Réglez la Position via le bouton u / d / l / r. ✎REMARQUE x Selon la source d'entrée sélectionnée, les options de format d'image peuvent varier. x Les éléments disponibles peuvent varier en fonction du mode sélectionné. x Lorsque vous connectez un PC au téléviseur, seuls les modes 16:9 et 4:3 peuvent être ajustés. x Les paramètres peuvent être réglés et enregistrés pour chaque périphérique externe connecté à une entrée du moniteur LED. x Si vous utilisez la fonction Adapter à l’écran avec une entrée HDMI 720p, 1 ligne est tronquée de chaque côté de l'écran, comme avec la fonction de surbalayage (overscan). ■ Zoom / Position : vous pouvez régler la taille et la position de l'image à l'aide du bouton u / d / l / r. ✎ Cette fonction n'est disponible que lorsque la taille de l'image est définie sur Zoom et Zoom large. ✎ En mode Zoom large, vous ne pouvez régler que la Position. ✎ Réinit. : restaure les paramètres par défaut du Zoom et de la Position. ■ Taille d'écran 4:3 (16:9 / Zoom large / Zoom / 4:3) : disponible uniquement si le format d'image est défini sur 16:9 Auto. Vous pouvez paramétrer le format d'image sur 4:3 WSS (Wide Screen Service, services de télévision au format large) ou sur le format d'origine. Chaque pays européen dispose d'un format d'image spécifique. ✎ Non disponible en mode HDMI, Composant et HDMI/DVI.Français 24 Fonctionnalités de base ■ Réglage écran PC ✎ Disponible uniquement en mode PC. x Régl. Base / Régl. Préc : supprime ou réduit le bruit d'image (parasites). Si un réglage fin ne suffit pas supprimer le bruit d'image, définissez la meilleure fréquence possible (Régl. Base) et procédez de nouveau à un réglage fin. Une fois la réduction de bruit effectuée, réajustez l'image de façon à l'aligner sur le centre de l'écran. x Position : réglez la position de l'écran du PC avec le bouton fléché (u / d / l / r). x Réinitialiser Image : restaure les paramètres par défaut de l'image. Les valeurs de fréquence, la position et le réglage fin sont ajustés Réglage Automatiquet automatiquement. ✎Disponible uniquement en mode PC. Utilisation de votre téléviseur comme un écran d'ordinateur Configuration de votre logiciel PC (basé sur Windows XP) Selon la version de Windows et la carte vidéo que vous utilisez, la présentation de l'écran sur votre PC peut varier. Dans tous les cas, les mêmes informations de base concernant la configuration sont toujours applicables. (Si tel n'est pas le cas, contactez votre fabricant d'ordinateur ou votre revendeur Samsung.) 1. Cliquez sur Panneau de configuration dans le menu de démarrage Windows. 2. Dans le Panneau de configuration, cliquez sur Apparence et thèmes ; une boîte de dialogue s'ouvre. 3. Cliquez sur Affichage ; une boîte de dialogue s'ouvre. 4. Ouvrez l'onglet Paramètres dans la boîte de dialogue d'affichage. x Le paramètre de format correct (résolution) [Optimal : 1920 x 1080 pixels]. (T19B300: 1366 x 768 pixels) x Si une option de fréquence verticale est disponible, la valeur appropriée doit être 60 ou 60 Hz. Sinon, cliquez sur OK et quittez la boîte de dialogue. Maintien de la bonne posture lorsque vous regardez votre téléviseur Efforcez-vous de garder une bonne posture lorsque vous regardez votre téléviseur. x Gardez le dos droit. x Maintenez une distance de 45 à 50 cm par rapport à l'écran. Positionnez-vous face à l'écran et regardez vers le bas. x Placez le téléviseur de sorte que l'écran ne réfléchisse pas la lumière. x Posez votre coude de façon à ce qu'il forme un angle droit avec votre bras et tenez votre main paume vers le bas. x Maintenez votre coude de façon à ce qu'il forme un angle droit avec votre bras. x Placez vos talons bien à plat sur le sol,positionnez vos jambes de façon à ce que les genoux forment un angle de 90 degrés ou supérieur, et maintenez votre bras sous le haut du corps. ¦ Changement des options d'image Paramètres avancés MENUm→ Image → Paramètres avancés → ENTERE (Les Paramètres avancés sont disponibles en mode Standard / Cinéma.) Comparé aux modèles précédents, le nouveau moniteur LED de Samsung propose une image plus précise. ✎Lorsque vous connectez un PC au téléviseur, vous pouvez uniquement modifier la Balance blancs. Paramètres avancés RVB uniquement Arrêt Espace de couleur Natif Balance blancs Gamma 0 Contraste Dyn. Elevé Nuance de noir Arrêt Carnation 0 ■ Contraste Dyn. (Arrêt / Bas / Moyen / Elevé) : règle le contraste à l'écran. ■ Nuance de noir (Arrêt / Sombre / Plus sombre / Le plus sombre) : sélectionne le niveau de noir pour régler la profondeur d'écran. ■ Carnation : met en évidence la carnation rose. ■ RVB uniquement (Arrêt / Rouge / Vert / Bleu) : affiche les couleurs rouge, verte et bleue pour procéder à des réglages fins de la teinte et de la saturation. ■ Espace de couleur (Auto. / Natif) : règle la gamme de couleurs disponibles pour créer l'image. ■ Balance blancs : règle la température de couleur pour une image plus naturelle. Aj. Rouge / Aj. Vert / Aj. Bleu : règle l'obscurité de chaque couleur (rouge, vert, bleu). Régl. rouge / Régl. vert / Régl. bleu : règle la luminosité de chaque couleur (rouge, vert, bleu). Réinit. : restaure les paramètres par défaut de la Balance blancs. ■ Gamma : règle l'intensité de la couleur primaire. ■ Lumin./Mouvement (Arrêt / Activé) : réduit la consommation d'énergie via le contrôle de la luminosité.Français 25 Fonctionnalités de base Options d'image MENUm→ Image → Options d'image → ENTERE ✎Lorsque vous connectez un PC au téléviseur, vous pouvez uniquement modifier la Nuance Coul.. Options d'image Nuance Coul. Standard Filtre Bruit num. Auto. Filtre Bruit MPEG Auto. Niv. noir HDMI Bas Mode Film Arrêt ■ Nuance Coul. (Froide / Standard / Chaude 1 / Chaude 2) ✎ La fonction Chaude 1 ou Chaude 2 sera désactivée si le mode image est dynamique. ✎ Les paramètres peuvent être réglés et enregistrés pour chaque périphérique externe connecté à une entrée du moniteur LED. ■ Filtre Bruit num. (Arrêt / Bas / Moyen / Elevé / Auto. / Visualisation auto) : si le signal de diffusion reçu par votre moniteur LED est faible, vous pouvez activer la fonction Filtre Bruit num. afin de réduire tout phénomène statique et les effets de traînées qui risquent d'apparaître à l'écran. ✎ Si le signal est faible, essayez d'autres options jusqu'à ce qu'une qualité d'image optimale soit disponible. Visualisation auto : affiche la force du signal lors du changement de canal analogique. ✎ Disponible uniquement pour les chaînes analogiques. ✎ Une barre verte indique que le signal de réception est excellent. ■ Filtre Bruit MPEG (Arrêt / Bas / Moyen / Elevé / Auto.) : réduit le bruit MPEG pour une qualité d'image optimale. ■ Niv. noir HDMI (Bas / Normal) : sélectionne le niveau de noir pour régler la profondeur d'écran. ✎ Disponible uniquement en mode HDMI (signaux RVB). ■ Mode Film (Arrêt / Auto.1 / Auto.2) : règle le moniteur LED de façon à détecter et traiter automatiquement les signaux de film provenant de toutes les sources et à fournir une qualité d'image optimale. ✎ Disponible en mode TV, HDMI (1080i). ✎ Si le rendu de l'écran ne semble pas naturel, paramétrez l'option sur Arrêt / Auto.1 / Auto.2 dans Mode Film. Réinit. param. img (Oui / Non) Restaure les paramètres par défaut de votre mode image courant. Menu Son ¦ Changement du mode son prédéfini MENUm→ Son → Mode Son → ENTERE Mode Son t ■ Standard : sélectionne le mode son normal. ■ Musique : met en relief la mélodie par rapport aux voix. ■ Cinéma : offre une qualité sonore idéale pour les films. ■ Voix claire : met en relief les voix par rapport aux sons. ■ Amplifier : augmente l'intensité des sons hautes fréquences afin de faciliter le confort d'écoute des malentendants. ✎Si Sélection Haut-parleur est défini sur Haut-parleur ext, Mode Son est désactivé. ¦ Réglage des paramètres de son Effet sonore MENUm→ Son → Effet sonore → ENTERE (mode son standard uniquement)  Cette fonction garantit un son surr ■ SRS TruSurround HD(Arrêt / Activé) ound virtuel 5.1 canaux par le t biais de deux haut-parleurs grâce à la technologie HRTF (Head Related Transfer Function - Fonction de transfert asservie aux mouvements de la tête). ■ SRS TruDialog (Arrêt / Activé)  Cette fonction permet d'accentuer l'intensité d'une voix par rapport au fond musical ou aux effets sonores, de manière à rendre les dialogues plus clairs. ■ Egaliseur  Règle le mode son. – Balance G/D : règle la balance entre les haut-parleurs droit et gauche. 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Réglage de la bande passante) : règle le niveau de fréquences spécifiques. – Réinit. : Restaure les paramètres par défaut de l'égaliseur.Français 26 Fonctionnalités de base ¦ Systèmes audio MENUm→ Son → ENTERE Options diffusion du son ■ Langue audio  (chaînes numériques uniquement)  Change la valeur par défaut des langues audio. ✎ La langue disponible peut varier selon l'émission. ■ Format Audio  (chaînes numériques uniquement)  sélectionne le format audio. ■ Description audio  (pas disponible partout) (chaînes numériques uniquement)  Cette fonction gère le flux audio de la description audio (AD) qui est transmise avec la bande sonore principale par l'émetteur. ✎ Description audio (Arrêt / Activé) : active ou désactive la fonction de description audio. ✎ Volume : règle le volume de la description audio. Paramètres supplémentaires (chaînes numériques uniquement) ■ Niveau Audio DTV (MPEG / HE-AAC) : Cette fonction vous permet de réduire la disparité d'un signal vocal (l'un des signaux reçus lors de la diffusion numérique sur le téléviseur). ✎ Selon le type de signal diffusé, MPEG / HE-AAC peut être réglé dans une plage comprise entre -10dB et 0dB. ✎ Pour augmenter ou diminuer le volume, choisissez une valeur comprise dans la plage 0 à -10. ■ Sortie SPDIF : la norme SPDIF (Sony Philips Digital InterFace) fournit un son de qualité numérique et réduit les interférences entre les haut-parleurs et les différents types de périphériques numériques (lecteur DVD, etc.). – Format Audio : vous pouvez sélectionner le format de sortie audio numérique (SPDIF). ✎ Le format disponible peut varier selon la source d'entrée utilisée. – Retard Audio : corrige les problèmes de synchronisation audiovidéo lorsque vous regardez la télévision ou un enregistrement vidéo, et lorsque vous écoutez un son de qualité numérique via un périphérique externe, tel qu'un récepteur AV (0 ms ~ 250 ms). ✎ Cette fonction n'est pas disponible pour les produits de la série TB300. ■ Comp Dolby Digital (Line / RF) : cette fonction minimise les disparités entre le signal dolby numérique et le signal vocal (audio MPEG, HE-AAC et son ATV (télévision avancée)). ✎ Sélectionnez Line pour obtenir un son dynamique et RF pour minimiser les variations entre les sons forts et doux une fois la nuit venue. Line : définit le niveau de sortie des signaux supérieurs ou inférieurs à -31 dB (référence) sur -20 dB ou -31 dB. RF : définit le niveau de sortie des signaux supérieurs ou inférieurs à -20 dB (référence) sur -10 dB ou -20 dB. Paramètres haut-parleur ■ Sélection Haut-parleur (Haut-parleur ext / Haut-parleur TV) : en raison d'un écart de vitesse de décodage entre le haut-parleur principal et le récepteur audio, un écho sonore risque de se produire. Si tel est le cas, paramétrez le téléviseur sur Haut-parleur ext. ✎ Lorsque Sélection Haut-parleur est défini sur Hautparleur ext, les boutons de réglage du volume et MUTE ne fonctionnent pas et les paramètres audio sont limités. ✎ Lorsque Sélection Haut-parleur est défini sur Hautparleur ext : x Haut-parleur TV : Arrêt, Haut-parleur ext : Activé ✎ Lorsque Sélection Haut-parleur est défini sur Hautparleur TV : x Haut-parleur TV : Activé, Haut-parleur ext : Activé ✎ S'il n'y a pas de signal vidéo, les deux haut-parleurs sont mis en sourdine. ✎ Cette fonction n'est pas disponible pour les produits de la série TB300. ■ Volume auto (Arrêt / Normal / Nuit) : pour égaliser le niveau du volume sur chaque canal, paramétrez sur Normal. Nuit : ce mode améliore la qualité sonore comparativement au mode Normal ; quasiment aucun bruit n'est audible. Il est particulièrement utile la nuit. Réinit. son (Oui / Non) Restaure toutes les valeurs d'usine des paramètres de son. ¦ Sélection du mode Son t Lorsqu'il est défini sur Dual fg, le mode son actuel s'affiche à l'écran. Type de son Dual f-g Paramètre par défaut A2 Stéréo Mono Mono Changement Stéréo Stéréo ↔ Mono automatique Dual Dual f ↔ Dual g Dual f NICAM Stéréo Mono Mono Changement Stéréo Mono ↔ Stéréo automatique Dual Mono ↔ Dual f  Dual g  Dual f ✎Si le signal Stéréo est faible et qu'une commutation automatique se produit, passez sur le mode Mono. ✎Activé seulement pour le signal son stéréo. ✎Disponible uniquement lorsque l'entrée Source est définie sur TV.Français 27 Fonctionnalités de base Menu Système ¦ Réglage de l'heure MENUm→ Système → ENTERE Heure ■ Horloge : le réglage de l'horloge permet d'utiliser diverses fonctions de minuterie du moniteur LED. ✎ L'heure courante s'affiche chaque fois que vous appuyez sur le bouton INFO. ✎ Si vous débranchez le cordon d'alimentation, vous devrez reparamétrer l'heure. Mode Horloge (Auto. / Manuel) x Auto. : règle automatiquement l'heure courante (fournie par un canal numérique). ✎ Pour que l'heure soit réglée automatiquement, l'antenne doit être connectée. x Manuel : règle manuellement l'heure courante. ✎ Selon la station et le signal d'émission utilisés, il se peut que le réglage automatique de l'heure soit erroné. Si tel est le cas, réglez l'heure manuellement. Réglage Horloge : Réglez manuellement les Jour, Mois, Année, Heure et Minute. ✎ Disponible uniquement lorsque le Mode Horloge est défini sur Manuel. ✎ Vous pouvez régler directement les Jour, Mois, Année, Heure et Minute avec les boutons numérotés de la télécommande. Fuseau Horaire (Auto. / Manuel) (dépend du pays d'utilisation) : sélectionne votre fuseau horaire. ✎ Cette fonction n'est disponible que si le Mode Horloge est défini sur Auto.. – GMT (GMT-3:00~GMT-1:00 / GMT / GMT+1:00~GMT+ 12:00) : sélectionne votre fuseau horaire. ✎ Cette fonction n'est disponible que si le Fuseau Horaire est défini sur Manuel. – Heure d'été (Arrêt / Activé) : active ou désactive la fonction Heure d'été. ✎ Cette fonction n'est disponible que si le Fuseau Horaire est défini sur Manuel. Utilisation du mode Veille ■ Veille t: Éteint automatiquement le moniteur LED après une période prédéfinie (30, 60, 90, 120, 150 et 180 minutes). ✎ Pour annuler le mode Veille, sélectionnez Arrêt. Réglage de la fonction Progr. activ. / Progr. désact. ■ Progr. activ. Progr. activ. 1 / Progr. activ. 2 / Progr. activ. 3: La minuterie peut être activée de trois manières différentes. Vous devez d'abord régler l'heure. Progr. activ. 1 Configuration Arrêt Heure 0:00 Volume 20 Source TV Antenne DTV Canal 1 Dim Lun Mar Mer Jeu Ven Sam R Retour Fermer Configuration : Sélectionnez Arrêt, Une fois, Quotid., Lun~Ven, Lun~Sam, Sam~Dim ou Manuel selon votre préférence. Pour paramétrer le jour d'activation de la minuterie, sélectionnez Manuel. ✎ Le symbole c indique le jour que vous avez sélectionné. Heure : règle l'heure et la minute. Volume : règle le niveau de volume souhaité. Source : Sélectionnez une source d'entrée souhaitée lorsque le moniteur LED est activé automatiquement.(USB ne peut être sélectionné que si un périphérique USB est connecté au moniteur LED.) Antenne (lorsque la Source est définie sur TV) : sélectionne ATV ou DTV. Canal (lorsque la Source est définie sur TV) : sélectionnez le canal de votre choix. Musique / Photo (lorsque la Source est définie sur USB) : sélectionne un dossier du périphérique USB contenant des fichiers musicaux ou des photos devant être lus lorsque le moniteur LED est allumé automatiquement. ✎ REMARQUE x Si aucun fichier musical du périphérique USB ou du dossier contenant ce type de fichier n'est pas sélectionné, la minuterie ne fonctionne pas correctement. x Si le périphérique USB contient un seul fichier photo, le diaporama ne s'affiche pas. x Si le nom d'un dossier est trop long, ce dernier ne peut pas être sélectionné. x Un dossier est affecté à chaque périphérique USB que vous utilisez. Lorsque plusieurs périphériques USB de même type sont utilisés, assurez-vous que les dossiers affectés à chacun ont des noms différents. x Avec la fonction Progr. activ., il est recommandé d'utiliser une clé USB et un lecteur multicarte. x Il se peut que la fonction Progr. activ. ne soit pas opérationnelle avec les périphériques USB dotés d'une batterie intégrée, les lecteurs MP3 ou les lecteurs multimédia portatifs de certains fabricants, car le processus de reconnaissance de ces appareils est parfois très long.Français 28 Fonctionnalités de base ■ Progr. désact. Progr. désact. 1 / Progr. désact. 2 / Progr. désact. 3: La minuterie peut être désactivée de trois manières différentes. Vous devez d'abord régler l'heure. Progr. désact. 1 Configuration Arrêt Heure 0:00 Dim Lun Mar Mer Jeu Ven Sam R Retour Fermer Configuration : Sélectionnez Arrêt, Une fois, Quotid., Lun~Ven, Lun~Sam, Sam~Dim ou Manuel selon votre préférence. Pour paramétrer le jour d'activation de la minuterie, sélectionnez Manuel. ✎ Le symbole c indique le jour que vous avez sélectionné. Heure : règle l'heure et la minute. ¦ Verrouillage de programmes MENUm→ Système → Sécurité → ENTERE Sécurité ✎L'écran de saisie du code PIN apparaît avant l'écran de configuration. ✎Saisissez votre code PIN à 4 chiffres ; la valeur par défaut est 0-0- 0-0. L'option Modifier PIN vous permet de changer de code PIN. ■ Verr. chaîne (Arrêt / Activé) : verrouille l'utilisation de chaînes dans le Gestionnaire des chaînes, afin d'empêcher les utilisateurs non autorisés, comme les enfants, de regarder des programmes inappropriés. ✎ Disponible uniquement lorsque l'entrée Source est définie sur TV. ■ Contrôle Parental (dépend du pays d'utilisation) : grâce à un code PIN à 4 chiffres, empêche les utilisateurs non autorisés de regarder des programmes inappropriés. Si la chaîne sélectionnée est verrouillée, le symbole \ s'affiche. ✎ Les éléments du Contrôle Parental varient selon le pays d'utilisation. ■ Modifier PIN : L'écran Modifier PIN apparaît. Choisissez 4 chiffres et saisissez-les. Changez votre ID personnel permettant de configurer le moniteur LED. Saisissez de nouveau les 4 chiffres que vous avez choisis. Votre code PIN est mémorisé une fois que l'écran de confirmation disparaît. ¦ Solutions économiques MENUm→ Système → Solution Eco → ENTERE Solution Eco ■ tMode éco. (Arrêt / Bas / Moyen / Elevé / Image désactivée) : il permet de régler la luminosité du moniteur LED de façon à réduire la consommation d'énergie. Si vous sélectionnez Image désactivée, l'écran est mis hors tension, mais le son est toujours activé. Appuyez sur n'importe quel bouton, à l'exception du bouton de réglage du volume, pour allumer l'écran. ■ Veille si aucun signal (Arrêt / 15 min / 30 min / 60 min) : Afin d'éviter la consommation inutile d'énergie, paramétrez la durée pendant laquelle le moniteur LED doit rester sous tension s'il ne reçoit pas de signal. ✎ Désactivé si le PC est en mode économie d'énergie. ■ Auto Power Off (Arrêt / Activé): éteint automatiquement le moniteur LED si ce dernier n'est pas utilisé pendant 4 heures (permet de réaliser des économies d'énergie). ¦ Autres fonctionnalités MENUm→ Système → ENTERE Langue ■ Langue des menus : définit la langue des menus. ■ Langue du télétexte : définit la langue de votre choix pour le télétexte. ✎ Si la langue sélectionnée n'est pas disponible pour l'émission voulue, l'anglais est la valeur par défaut. ■ Langue favorite (Audio principal / Audio secondaire / Soustitre principal / Sous-titre secondaire ) : sélectionne une langue qui sera la langue par défaut pour chaque chaîne sélectionnée. Sous-titres Ce menu permet de paramétrer le mode Soustitres. ■ Sous-titres (Arrêt / Activé) : active ou désactive les sous-titres. ■ Mode Sous-titres (Normal / Malentendant) : paramètre le mode Sous-titres. ■ Langue des sous-titres : définit la langue des sous-titres. ✎ Si le programme que vous regardez ne prend pas en charge la fonction Malentendant, la fonction Langue préférée s'active automatiquement même si le mode Malentendant est sélectionné. ✎ Si la langue sélectionnée n'est pas disponible pour l'émission voulue, l'anglais est la valeur par défaut.Français 29 Fonctionnalités de base Texte numérique (Désactiver / Activer) (Royaume-Uni uniquement) Si le programme est diffusé avec du texte numérique, cette fonctionnalité est activée. Temps protection auto ■ Arrêt / 2 heures / 4 heures / 8 heures / 10 heures : Si l'écran demeure inutilisé avec une image fixe au-delà d'une période définie par l'utilisateur, l'économiseur d'écran est activé afin d'empêcher la formation d'images fantômes. Général ■ Mode éco max (Arrêt / Activé) : éteint le moniteur du PC si ce dernier n'est pas utilisé pendant un certain temps (permet de réaliser des économies d'énergie). ■ Mode Jeu (Arrêt / Activé) : si vous vous connectez à une console de jeu de type PlayStation™ ou Xbox™, vous pouvez bénéficier d'un environnement de jeu plus réaliste en sélectionnant le mode jeu. ✎REMARQUE x Précautions et limites à prendre en compte pour le mode Jeu – Pour déconnecter la console de jeu et vous connecter à un autre périphérique externe, paramétrez Mode Jeu sur Arrêt dans le menu de configuration. – Si vous affichez le menu du moniteur LED en Mode Jeu, l'écran tremble légèrement. x Le Mode Jeu n'est pas disponible si la source d'entrée est définie sur TV ou PC. x Une fois que la console de jeu est connectée, paramétrez Mode Jeu sur Activé. Malheureusement, il se peut que l'image soit de moins bonne qualité. x Si Mode Jeu est Activé : – Le mode Image est défini sur Standard et le mode Son sur Cinéma. ■ Verr. clavier (Arrêt / Activé) : verrouille ou déverrouille simultanément toutes les touches du panneau avant. Lorsque la fonction Verr. clavier est activée, aucune des touches du panneau avant ne fonctionne. ■ Affich. logo (Arrêt / Activé) : affiche le logo Samsung lorsque le moniteur LED est allumé. Interface commune ■ CI Menu : il permet à l'utilisateur d'utiliser le menu fourni par le module CAM. sélectionne le menu Ci basé sur la carte PC. ■ Infos sur l'application : affiche des informations sur le module CAM inséré dans le logement CI et sur la carte CI ou CI+ qui est insérée dans le module CAM. Vous pouvez installer le module CAM à tout moment, que le moniteur LED soit allumé ou éteint. 1. Achetez un module CI CAM chez votre revendeur le plus proche ou par téléphone. 2. Insérez fermement la carte CI ou CI+ dans le module CAM en respectant le sens de la flèche. 3. Insérez le module CAM avec la carte CI ou CI+ dans le logement de l'interface commune en respectant le sens de la flèche, de sorte qu'il s'aligne parallèlement avec le logement. 4. Vérifiez si vous voyez apparaître une image sur une chaîne dont le signal est brouillé. ¦ Incrustation d'image (PIP) MENUm→ Système → PIP → ENTERE Vous pouvez regarder simultanément le syntoniseur (tuner) du moniteur PIP t LED et une source vidéo externe. PIP ne fonctionne pas dans le même mode. ✎REMARQUE x Pour bénéficier du son PIP, reportez-vous aux instructions de la fonction Sélection du son. x Si vous éteignez le moniteur LED alors que vous êtes en mode PIP, la fenêtre d'incrustation disparaît. x Lorsque vous utilisez l'écran principal pour afficher un jeu ou un karaoké, il se peut que l'image incrustée prenne un aspect légèrement artificiel. x Lorsque la fonction Contrôle Parental est activée, la fonction PIP ne peut pas être utilisée. x Paramètres de la fonction PIP Image principale Image secondaire HDMI, HDMI (PC), Composant, PC TV ■ PIP (Arrêt / Activé) : active ou désactive la fonction PIP. ■ Canal : sélectionne le canal pour l'écran secondaire. ■ Taille (Õ / Ã) : sélectionne une taille pour l'image secondaire. ■ Position (à / – / — / œ) : sélectionne une position pour l'image secondaire. ■ Sélection du son (Principal / Secondaire) : En mode PIP, vous pouvez sélectionner le son de votre choix (Principal / Secondaire). ¦ DivX® Video On Demand Affiche le code d'enregistrement du téléviseur. Si vous vous connectez au site Web du DivX et que vous vous enregistrez, vous pouvez télécharger le fichier d'enregistrement de VOD. Si vous lisez l'enregistrement VOD avec un contenu multimédia, c'est que l'enregistrement est terminé. ✎Pour plus d'informations sur la fonction DivX® VOD, rendez-vous sur http://vod.divx.com.Français 30 Fonctionnalités de base Menu Assistance MENUm→ Assistance → ENTERE Diagnost. auto. ✎L'exécution de Diagnost. auto. peut durer quelques secondes, ce qui est parfaitement normal. ■ Test de l'image (Oui / Non) : permet de contrôler les problèmes d'image. Oui : Si la procédure de test n'apparaît pas ou qu'elle génère un bruit, choisissez Oui. Il se peut qu'il y ait un problème avec le moniteur LED. Pour bénéficier d'une assistance, contactez le centre d'appel de Samsung. Non : Si la procédure de test s'affiche correctement, choisissez Non. Il se peut qu'il y ait un problème avec votre périphérique externe. Vérifiez les branchements. Si le problème persiste, consultez le manuel d'utilisation du périphérique externe. ■ Test du son (Oui / Non) : utilise la mélodie intégrée pour vérifier les problèmes de son. Oui : si le son ne provient que d'un haut-parleur ou si aucun son n'est émis pendant la procédure de test, choisissez Oui. Il se peut qu'il y ait un problème avec le moniteur LED. Pour bénéficier d'une assistance, contactez le centre d'appel de Samsung. Non : si le son provenant des haut-parleurs est correct, choisissez Non. Il se peut qu'il y ait un problème avec votre périphérique externe. Vérifiez les branchements. Si le problème persiste, consultez le manuel d'utilisation du périphérique externe. ■ Informations de signal : (chaînes numériques uniquement) soit la qualité de réception d'une chaîne HD est parfaite, soit les chaînes ne sont pas disponibles. Réglez votre antenne de façon à augmenter la force du signal. ■ Réinit. : restaure les valeurs par défaut de tous les paramètres, à l'exception des paramètres réseau. Mise à niveau du logiciel La fonction Mise à niveau du logiciel peut être mise en œuvre via un signal de diffusion, ou via la dernière version du microprogramme que vous pouvez télécharger depuis le site www.samsung.com sur un dispositif USB. Version actuelle: logiciel déjà installé sur le moniteur LED. ✎Le logiciel est représenté dans le format suivant : Année/Mois/ Jour_Version. Mise à niveau du logiciel USB Canal Autre logiciel Mise à niveau en mode veille 2 h. plus tard Installation de la dernière version ■ USB : insérez un lecteur USB contenant le fichier de mise à niveau du micrologiciel, que vous téléchargez à partir de www.samsung.com sur le téléviseur. Veillez à ne pas débrancher l'alimentation et à ne pas retirer le lecteur USB tant que la mise à niveau n'est pas terminée. Le téléviseur est éteint, puis rallumé automatiquement une fois que la mise à niveau du micrologiciel est terminée. Lorsque le logiciel est mis à niveau, les valeurs par défaut des paramètres vidéo et audio que vous avez définis sont restaurées. Nous vous conseillons de noter vos paramètres par écrit afin de les redéfinir plus facilement après la mise à niveau. ■ Canal : mise à niveau du logiciel via le signal de diffusion. ✎ Si la fonction est sélectionnée lors de la transmission du logiciel, ce dernier est automatiquement recherché et téléchargé. ✎ Le temps de téléchargement nécessaire est déterminé par le statut du signal. ■ Autre logiciel: Remplacez le logiciel actuel par un autre. ■ Mise à niveau en mode veille (Arrêt / 1 h. plus tard / 2 h. plus tard / 00:00 / 02:00 / 12:00 / 14:00) : Une mise à niveau manuelle est exécutée automatiquement à l'heure choisie. Étant donné que la mise sous tension s'effectue de façon interne, il se peut que l'écran à LED s'allume. Ce phénomène peut continuer pendant 1 heure, jusqu'à ce que la mise à niveau du logiciel soit terminée. Contacter Samsung Consultez cette section si votre moniteur LED ne fonctionne pas correctement ou lorsque vous souhaitez procéder à la mise à niveau du logiciel. Vous y trouverez des informations concernant nos centres d'appels et sur la procédure de téléchargement des produits et logiciels. Content Home Profitez de contenus utiles et variés. Port TV Clé USBFrançais 31 Fonctionnalités avancées Profitez de vos vidéos, photos et fichiers musicaux stockés sur un périphérique USB à mémoire de grande capacité. 1. Appuyez sur le bouton CONTENT. 2. Appuyez sur le bouton l / r pour sélectionner le menu voulu (Media Play), puis appuyez sur le bouton ENTERE. CONTENT → Media Play → ENTERE Utilisation du Media Play ¦ Connexion d'un périphérique USB 1. Allumez votre téléviseur. 2. Branchez un périphérique USB contenant des fichiers photos et musicaux à la prise USB sur le côté du téléviseur. 3. Lorsque la clé USB est connectée au téléviseur, une fenêtre en incrustation apparaît. Vous pouvez alors sélectionner Périphérique connecté. ✎Elle risque de ne pas fonctionner correctement avec des fichiers multimédia sans licence. ✎Liste d'informations que vous devez connaître avant d'utiliser le Media Play. x Le protocole MTP (Media Transfer Protocol) n'est pas pris en charge. x Le système de fichiers prend en charge les tables FAT16, FAT32 et NTFS. x Il se peut que certains types de caméras numériques USB et de périphériques audio ne soient pas compatibles avec ce téléviseur. x Media Play ne prend en charge que les périphériques USB à mémoire de grande capacité. Il s'agit de périphériques de transport de vrac. Exemples : clé USB, lecteur de carte Flash et disque dur USB (les hubs USB ne sont pas compatibles). Les périphériques doivent être branchés directement au port USB du téléviseur. x Le disque dur USB n'est pas pris en charge. x Avant de connecter votre périphérique au téléviseur, faites-en une copie de sauvegarde par mesure de sécurité. SAMSUNG ne peut être tenu pour responsable d'aucune altération de fichier ou perte de données. x Ne débranchez pas le périphérique USB lorsqu'il est en cours de chargement. x Plus la résolution de l'image est élevée, plus l'image met de temps à s'afficher. x Pour le format JPEG, la résolution maximale prise en charge est de 15360 x 8640 pixels. x Si les fichiers ne sont pas pris en charge ou sont altérés, un message de type « Format de fichier non pris en charge » s'affiche. x Les fichiers MP3 protégés par DRM qui ont été téléchargés à partir d'un site payant ne peuvent pas être lus. La technologie de gestion des droits numériques (DRM) prend en charge la création, la distribution et la gestion de contenus de manière intégrée et complète, en assurant notamment la protection des droits et intérêts des fournisseurs de contenus, en empêchant la copie illégale de ces mêmes contenus et via l'administration des factures et des règlements. x Si plusieurs périphériques PTP sont connectés, vous ne pouvez en utiliser qu'un à la fois. x Si plusieurs périphériques de stockage de masse sont connectés simultanément, certains risquent de ne pas être reconnus Il se peut que les périphériques USB à forte consommation d'énergie (plus de 500 mA ou 5 V) ne soient pas pris en charge. x Si un message d'avertissement lié à une surconsommation s'affiche lorsqu'un périphérique USB est connecté ou en cours d'utilisation, ce dernier risque de ne pas être reconnu ou de ne pas fonctionner correctement. Media Play / Vidéos / 3,23 Go disponible / 3,55 Go Cruzer Blade Vidéos Photos Musique R Retour • L'image affichée peut varier selon le modèle utilisé. Port TV Clé USBFrançais 32 Fonctionnalités avancées x Si le téléviseur n'a pas été utilisée pendant une durée définie via la fonction Temps protection auto, l'économiseur d'écran se met en route. x Le mode économie d'énergie de certains disques durs externes peut se déclencher automatiquement lorsqu'ils sont connectés au téléviseur. x Si un câble d'extension USB est utilisé, le périphérique USB risque de ne pas être reconnu ou les fichiers de ce périphérique ne seront peut-être pas lus. x Si un périphérique USB connecté au téléviseur n'est pas reconnu, que la liste de fichiers que contient le périphérique est endommagée ou qu'un fichier de la liste n'est pas lu, connectez le périphérique USB au PC, formatez le périphérique et testez la connexion. x Media Play ne prend en charge que le format jpeg séquentiel. ¦ Affichage à l'écran Accédez au fichier de votre choix avec les boutons u / d / l / r, puis appuyez sur le bouton ENTERE. Le fichier est lu. L'aspect de l'écran Media Play peut varier selon le moyen utilisé pour y accéder. Mode Contenu : Vous pouvez sélectionner le type de contenu de votre choix. Information : affiche le type de contenu sélectionné (musique, par exemple), le périphérique (lecteur USB, par exemple), le nom du dossier/fichier et la page. Affiche des informations sur le fichier sélectionné. Dossier parent Vidéo_02 1 jan 2012 Vidéo_02.AVI 1 jan 2012 17.6MB Vidéo_03 1 jan 2012 Vidéo_04 1 jan 2012 Vidéo_05 1 jan 2012 Vidéo_06 1 jan 2012 Vidéo_07 1 jan 2012 Vidéo_08 1 jan 2012 Vidéo_01 1 jan 2012 Media Play / Vidéos / Cruzer.../Vidéo_02.AVI 2 / 8 �µ Autre page E Lecture T Outils R Retour Boutons de commande • �Revient à la page précédente. Disponible uniquement avec la fonction Musique. • µPasse à la page suivante. Disponible uniquement avec la fonction Musique. • E Lecture: lire le fichier multimédia. • T Outils : Affiche le menu d'options. • R Retour : revient à l'étape précédente. • L'image affichée peut varier selon le modèle utilisé.Français 33 Fonctionnalités avancées Vidéos Lecture de vidéos 1. Appuyez sur le bouton l / r / u / d pour sélectionner la vidéo de votre choix dans la liste de fichiers. 2. Appuyez sur le bouton ENTERE ou ∂ (Lecture). x Le nom du fichier sélectionné s'affiche en haut de l'écran avec son temps de lecture. x Si la durée de la vidéo est inconnue, le temps de lecture et la barre de progression ne s'affichent pas. x Pendant la lecture de la vidéo, vous pouvez utiliser les boutons l et r pour effectuer une recherche. x Vous pouvez aussi utiliser les boutons π (REW) et µ (FF). ✎ Ce mode permet de diffuser les clips vidéo d'un jeu, mais vous ne pouvez pas jouer au jeu lui-même. • L'image affichée peut varier selon le modèle utilisé. Formats de sous-titres pris en charge – Externe Nom Extension MPEG-4 Timed text .ttxt SAMI .smi SubRip .srt SubViewer .sub Micro DVD .sub ou .txt SubStation Alpha .ssa Advanced SubStation Alpha .ass Powerdivx .psb – Interne Nom Conteneur Xsub AVI SubStation Alpha MKV Advanced SubStation Alpha MKV SubRip MKV MPEG-4 Timed text MP4Français 34 Fonctionnalités avancées Formats vidéo pris en charge Extension de fichier Conteneur Codec vidéo Résolution Cadence d'images (fps) Débit (Mbps) Commentaires Codec audio *.avi *.mkv *.asf *.wmv *.mp4 *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.m2ts *.mts *.divx AVI MKV ASF MP4 3GP VRO VOB PS TS DivX 3.11 / 4.x / 5.1 / 6.0 1920 x 1080 30 20 [40] GMC non pris en charge AC3 LPCM ADMPCM(IMA, MS) AAC HE-AAC WMA DD+ MPEG(MP3) DTS Core Vorbis MPEG4 SP / ASP H.264 BP / MP / HP Hors FMO / ASO / RS Prise en charge de BP / MP / HP niveau 4.1 H.263 Profil 3, restreint en fonction de la résolution SD Motion JPEG 640 x 480 10 Window Media Video v9 1920 x 1080 20 [40] VC1 SP / MP /A P L3 pris en charge, L4 non pris en charge Profil simple niveau moyen Profil principal niveau élevé Profil avancé niveau 3 WMV9 pris en charge MPEG2 Profil élevé niveau élevé MPEG1 MPEG-1 sauf D-pictureFrançais 35 Fonctionnalités avancées Autres restrictions ✎REMARQUE x Si le contenu d'un codec pose problème, ce dernier ne sera pas pris en charge. x Si les informations relatives à un conteneur sont incorrectes et que le fichier est en condition d'erreur, le conteneur ne pourra pas être lu correctement. x Le son ou la vidéo risquent d'être déficients si la cadence d'images / le débit standard sont supérieur à la valeur compatible répertoriée dans le tableau ci-dessus. x Si la table d'index est erronée, la fonction de recherche (aller à) n'est pas prise en charge. x La lecture d'une vidéo via une connexion peut générer des images saccadées. Nom Format x Prise en charge de la norme H.264 jusqu'au niveau 4.1 x H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 et AVCHD ne sont pas prises en charge. x MPEG4 SP, ASP : – Inférieur à 1280 x 720 : 60 images max. – Supérieur à 1280 x 720 : 30 images max. x Les normes au-delà de GMC 2 ne sont pas pas prises en charge. x La norme WMA versions 7, 8, 9 et standard est prise en charge. x WMA 9 PRO ne prend pas en charge l'audio deux canaux, multicanaux ou sans perte. x Le taux d'échantillonnage WMA 22050 Hz mono n'est pas pris en charge. Photos Affichage d'une photo (ou d'un diaporama) 1. Appuyez sur le bouton u / d / l / r pour sélectionner la photo de votre choix dans la liste de fichiers. 2. Appuyez sur le bouton ENTERE. – Lorsque la photo sélectionnée s'affiche, appuyez sur le bouton ENTERE pour lancer le diaporama. – Pendant le diaporama, tous les fichiers s'affichent dans l'ordre de la liste. ✎Les fichiers musicaux peuvent être lus automatiquement pendant le diaporama si la fonction Musique de fond est définie sur Activé. ✎La Musique de fond ne peut pas être modifiée tant que la source de musique de fond est en cours de chargement. • L'image affichée peut varier selon le modèle utilisé. 0801181247070.JPG 1 jan 2012 663.0KB 1920 x 1080 �µAutre page E Lecture T Outils R Retour Media Play / Photos / Cruzer... / Photos / 0801181... .JPG 7 / 1000 Dossier parent Formats d'image pris en charge Extension de fichier Format Résolution *.jpg JPEG 15360 x 8640 *.bmp BMP 1920 x 1080 *.mpo MPO 15360 x 8640Français 36 Fonctionnalités avancées Musique Lecture de musique 1. Appuyez sur le bouton u / d pour sélectionner le morceau de musique de votre choix dans la liste de fichiers. 2. Appuyez sur le bouton ENTERE. ✎N'affiche que les fichiers dont l'extension est listée dans les formats de musique pris en charge. Les autres extensions ne s'affichent pas, même si elles sont enregistrées sur le même périphérique USB. ✎Si un son anormal est émis à la lecture des fichiers MP3, réglez la fonction Egaliseur dans le menu Son. (Un fichier MP3 modulé à une fréquence trop élevée risque de générer un problème de son.) • L'image affichée peut varier selon le modèle utilisé. Media Play / Musique / Cruzer... / Musique / Musique_01.mp3 Musique_01 Chanteur 1 Musique_02 Chanteur 2 Musique_01 Chanteur 1 2003 Fallen Autre 2:36 / 5:00 Musique_03 Chanteur 3 Musique_04 Chanteur 4 Musique_05 Chanteur 5 Musique_06 Chanteur 6 Musique_07 Chanteur 7 Musique_08 Chanteur 8 Musique_09 Chanteur 9 Dossier parent b{ Autre page ELecture T Outils R Retour Lecture de morceaux musicaux choisis 1. Appuyez sur le bouton TOOLST et sélectionnez Lire sélection. 2. Sélectionne les morceaux de musique de votre choix. ✎ Le symbole c apparaît à gauche des fichiers que vous avez sélectionnés. 3. Appuyez sur le bouton TOOLST et sélectionnez Lire sélection. ✎ Pour sélectionner ou désélectionner tous les morceaux, appuyez sur Sélectionner tout / Tout désélectionner. Formats de musique pris en charge Extension de fichier Type Codec *.mp3 MPEG MPEG1 Audio Layer 3 *.m4a *.mpa *.aac *.3ga MPEG4 AAC *.flac FLAC FLAC *.ogg OGG Vorbis *.wma WMA WMAFrançais 37 Fonctionnalités avancées ¦ Media Play - Autres fonctions Menu d'options Vidéos/Photos/Music Play Appuyez sur le bouton TOOLST pour effectuer les opérations suivantes. Option Opérations Vidéos Photos Musique Mode Aléatoire Permet de lire des morceaux de manière aléatoire dans la liste de lecture. > Mode Répétition Permet de répéter la lecture des fichiers multimédia. > > Mode Image Permet de régler la qualité de l'image. > > Mode Son Permet de régler la qualité du son. > > > Lancer le diaporama / Arrêter le diaporama Permet de démarrer ou d'interrompre la lecture d'un diaporama. > Vit. diaporama Permet de régler la vitesse de défilement du diaporama. > Fond musical Permet d'activer ou de désactiver la musique de fond lorsque vous regardez un diaporama. > Paramètres de musique de fond Permet de sélectionner la musique de fond de votre choix lorsque vous regardez un diaporama. > Zoom Permet de zoomer au sein des images en mode plein écran. > Pivoter Permet de faire pivoter les images en mode plein écran. > Information Permet d'afficher des informations détaillées sur le fichier en cours de lecture. > > > Lire sélection Permet de lire les éléments que vous avez sélectionnés. > > > Recherche titre Permet de passer directement à un autre titre. > Recher. temps Permet de faire défiler un film avec les boutons l et r à intervalles de 1 minute. > Format de l'image Permet de régler le format de l'image à votre convenance. > Sous-titres Vous pouvez régler le sous-titre sur Activé / Arrêt. > Param. de sous-titre Cette option est disponible uniquement quand le nom du fichier de sous-titres correspond au nom du fichier vidéo. > Langue audio Vous pouvez lire une vidéo dans la langue de votre choix, à condition qu'elle soit prise en charge. Cette option est disponible uniquement quand un fichier de type flux prenant en charge plusieurs formats audio est lu. >Français 38 Autres informations Fonction Télétexte sur les chaînes analogiques La page d'index du service Télétexte indique comment utiliser le service. Pour que les informations Télétexte s'affichent correctement, la réception de la chaîne doit être stable. Sinon, des informations peuvent manquer ou des pages risquent de ne pas s'afficher. ✎Pour changer les pages Télétexte, appuyez sur les boutons numériques de la télécommande. 1 / (Teletext on/mix/off) : active le mode Télétexte pour la chaîne en cours. Appuyez deux fois sur le bouton pour que le mode Télétexte apparaisse sur l'écran du programme en cours. Appuyez une nouvelle fois pour quitter le mode Télétexte. 2 8 (mémoriser) : enregistre les pages Télétexte. 3 6 (index) : affiche la page d'index (contenu) à tout moment lorsque vous utilisez le mode Télétexte. 4 4 (taille) : affiche le télétexte dans la partie supérieure de l'écran au format double. Pour accéder à la partie inférieure de l'écran, appuyez de nouveau. Pour revenir à l'affichage normal, appuyez une nouvelle fois. 5 9 (suspendre): bloque l'écran sur la page en cours s'il existe plusieurs pages secondaires qui suivent automatiquement. Pour libérer l'écran, appuyez de nouveau. 6 Boutons colorés (rouge, vert, jaune et bleu) : Si le système FASTEXT est utilisé par l'opérateur de télévision, les rubriques sur une page Télétexte ont une couleur associée et vous pouvez les sélectionner en appuyant sur les boutons colorés. Appuyez sur la couleur correspondant à la rubrique de votre choix. Une nouvelle page en couleur apparaît. Vous pouvez sélectionner les éléments de la même manière. Pour afficher la page précédente ou suivante, appuyez sur le bouton coloré correspondant. 7 0 (mode) : sélectionne le mode Télétexte (LISTE/ FLOF). Si vous appuyez lorsque le mode LISTE est actif, vous passez au mode d'enregistrement de liste. Dans ce mode, vous pouvez enregistrer une page Télétexte dans une liste en utilisant le bouton 8 (mémoriser). 8 1 (sous-page) : affiche la sous-page disponible. 9 2 (page suivante) : affiche la page Télétexte suivante. 0 3 (page précédente) : affiche la page Télétexte précédente. ! 5 (afficher) : affiche le texte masqué (réponses à des jeux de type questionnaires, par exemple). Pour afficher l'écran normal, appuyez de nouveau. @ 7 (annuler) : rétrécit l'écran Télétexte pour faire apparaître le programme TV en cours. Page Télétexte standard Partie Table des matières A Numéro de la page sélectionnée B Identité de la chaîne C Numéro de la page en cours ou indications de recherche D Date et heure E Texte F Informations d'état Informations FASTEXT 7 8 9 0 ! @ 3 1 4 5 6 2Français 39 Autres informations Fixation d'un montage mural/sur socle de support Préparation de l'installation du montage mural/socle de support 1. Mettez le produit hors tension et débranchez le codon d'alimentation du secteur. 2. Placez un chiffon doux ou un coussin sur une surface place pour protéger le panneau et placez le produit face tournée vers le bas. 3. Maintenez le corps du produit. Tirez le support dans le sens de la flèche, comme l'indique l'illustration, pour le séparer. Fixation d'un montage mural/sur socle de support 1 A 2 3 4 [ATTENTION Important Pour l'installation murale, n'utilisez pas de vis d'une longueur supérieure à 14 mm (L14).. 4. Alignez le support de montage mural/socle de fixation sur le moniteur/écran LED et fixez fermement le support avec la vis. 5. Alignez la rainure de la partie du produit à connecter au support sur celle du support (socle, montage mural ou autre support) et fixez fermement le support avec la vis. A B Kit de fixation mural/Socle de support (non fourni) A Fixation murale/sur socle BFrançais 40 Autres informations ✎REMARQUE x Si vous utilisez des vis d'une longueur supérieure à celle indiquée dans les spécifications, vous risquez d'endommager le produit. x Pour les montages muraux incompatibles avec les spécifications VESA standard, la longueur de la vis peut être différente en fonction des spécifications correspondantes. x Évitez d'utiliser des vis qui ne répondent pas aux normes des spécifications VESA et de forcer leur fixation afin de ne pas endommager le produit ou de ne pas vous blesser en le faisant tomber. La société Samsung ne peut pas être tenue pour responsable des dommages ou des blessures provoqué(e)s. x La société Samsung ne peut pas être tenue pour responsable des dommages subis par le produit ou des blessures provoquées par l'utilisation d'un support de fixation mural/ socle non conforme aux spécifications ou par une installation non effectuée par un installateur agréé. x Si vous fixez le produit sur un mur, achetez un support avec un dégagement d'au moins 10 cm par rapport au mur. x Utilisez le support de fixation mural conformément aux spécifications internationales. Verrou Kensington antivol Ce dispositif n'est pas fourni par Samsung. Il sert à fixer physiquement le système dans un lieu public. L'apparence et le mode de verrouillage peuvent être différents de ceux indiqués dans l'illustration en fonction du fabricant. Consultez le manuel fourni avec le verrou Kensington pour plus d'informations sur l'utilisation correcte du verrou. ✎Recherchez l'icône “K” à l'arrière du moniteur LED. Une encoche de sécurité Kensington se trouve à côté de l'icône K. Pour verrouiller le produit, procédez comme suit : 1. Passez le câble du verrou Kensington autour d'un grand objet fixe, tel qu'un bureau ou une chaise. 2. Passez l'extrémité du câble avec le verrou fixé par la boucle du câble du verrou Kensington. 3. Insérez le dispositif de verrouillage dans l'encoche de sécurité Kensington sur le produit (1). 4. Fermez le verrou. 1 ✎Ce sont des instructions générales. Pour les instructions exactes, reportez-vous au manuel d'utilisation fourni avec le dispositif de verrouillage. ✎Le dispositif de verrouillage doit être acheté séparément. ✎L'emplacement de l'encoche de sécurité Kensington peut varier selon le modèle de moniteur LED utilisé.Français 41 Autres informations Dépannage Pour toute question sur le moniteur LED, reportez-vous en premier lieu à cette liste. Si aucun de ces conseils de dépannage ne s'applique, visitez le site www.samsung.com et cliquez sur Support ou contactez le centre d'appels indiqué sur la quatrième de couverture du manuel. Problèmes Solutions et explications Qualité de l'image Tout d'abord, exécutez le Test de l'image et vérifiez que le moniteur LED affiche correctement l'image de test. (Accédez à MENU - Assistance - Diagnost. auto. - Test de l'image) Si l'image s'affiche correctement, le problème peut provenir de la source ou du signal. La qualité de l'image du moniteur LED n'est pas aussi bonne que celle produite dans le magasin. • Si vous utilisez un câble/décodeur analogique, utilisez un décodeur numérique. Utilisez l'interface HDMI pour produire une qualité d'image HD (haute définition). • Abonnés au câble/satellite : testez les chaînes HD depuis les canaux numériques. • Connexion de l'antenne : testez les chaînes HD après avoir effectué un réglage automatique. ✎ La plupart des chaînes HD sont converties depuis le contenu SD (définition standard). • Définissez 1080i ou 720p comme résolution de sortie vidéo du câble/décodeur. • Vérifiez que vous regardez le moniteur LED en respectant la distance minimale recommandée en fonction de la taille et de la définition du signal. L'image est déformée : erreur macro bloc, petit bloc, points, pixellisation • La compression du contenu vidéo peut déformer l'image, notamment les images animées rapides (manifestations sportives ou films d'action, par exemple). • Un signal faible ou une mauvaise qualité peut déformer l'image. Le moniteur LED n'est pas à l'origine du problème. • Un téléphone mobile situé à côté du moniteur LED (cca jusqu'à 1 m) peut générer du bruit dans l'image sur un moniteur LED analogique ou numérique. Mauvaise qualité des couleurs ou de la luminosité. • Réglez les options d'image dans le menu du moniteur LED. (Accédez à Mode Image / Couleur / Luminosité / Netteté.) • Réglez l'option Mode éco. dans le menu du moniteur LED. (Accédez à MENU- Système - Solution Eco - Mode éco..) • Essayez de réinitialiser l'image pour afficher les paramètres d'image par défaut. (Accédez à MENU - Image - Réinit. param. img.) Une ligne pointillée apparaît sur le bord de l'écran. • Si Adapter à l’écran est défini comme format d'image, remplacez-le par 16:9. • Changez la résolution du récepteur câble/satellite. Lors du changement de chaîne, l'image se fige, se déforme ou s'affiche en retard. • Si vous utilisez un décodeur, essayez de réinitialiser le décodeur. Reconnectez le cordon CA et attendez que le décodeur se réinitialise. L'opération peut prendre 20 minutes. • Définissez 1080i ou 720p comme résolution de sortie pour le décodeur. Qualité du son Tout d'abord, exécutez le Test du son pour vérifier que le son du moniteur LED fonctionne correctement. (Accédez à MENU - Assistance - Diagnost. auto. - Test du son.) Si le son fonctionne correctement (OK), le problème audio peut provenir de la source ou du signal. Pas de son ou son très faible lorsque le volume sonore est au maximum. • Vérifiez le volume du périphérique (décodeur/récepteur satellite, DVD, Blu-ray, etc.) connecté au moniteur LED. La qualité de l'image est bonne, mais aucun son n'est émis. • Si vous utilisez un câble DVI/HDMI, le moniteur LED ne prend pas en charge la fonction audio. • Redémarrez le périphérique qui est branché en reconnectant son câble d'alimentation. • Si le moniteur LED dispose d'une prise pour casque, vérifiez qu'aucun appareil n'y est connecté. Les haut-parleurs génèrent des parasites. • Vérifiez la force du signal pour la connexion d'antenne ou du câble. Un signal faible peut déformer le son. Aucune image, aucune vidéo Le moniteur LED ne s'allume pas. • Vérifiez que le câble d'alimentation CA est correctement connecté au secteur et au moniteur LED. • Vérifiez que la prise secteur fonctionne. • Essayez d'appuyer sur le bouton POWER du moniteur LED pour vérifier que le problème ne provient pas de la télécommande. Si le moniteur LED s'allume, reportez-vous à la section « La télécommande ne fonctionne pas » ci-dessous. Le moniteur LED s'éteint automatiquement. • Vérifiez que le paramètre Veille est défini sur Arrêt dans le menu Heure. • Si le PC est connecté au moniteur LED, vérifiez les paramètres d'alimentation du PC. • Vérifiez que le câble d'alimentation CA est correctement connecté au secteur et au moniteur LED. • Lorsque vous utilisez le moniteur LED avec une antenne ou un câble, le moniteur s'éteint après 10 à 15 minutes si aucun signal n'est reçu.Français 42 Autres informations Problèmes Solutions et explications Aucune image/vidéo. • Vérifiez les branchements des câbles (déconnectez et reconnectez tous les câbles connectés au moniteur LED et aux périphériques externes). • Définissez les sorties vidéo des périphériques externes (Câble/Décodeur, DVD, Blu-ray, etc.) pour qu'elles correspondent aux connexions à l'entrée du moniteur LED. Si, par exemple, la sortie d'un périphérique externe est HDMI, il doit être connecté à une entrée HDMI sur le moniteur LED. • Vérifiez que les périphériques connectés sont sous tension. • Veillez à sélectionner la source correcte du moniteur LED en appuyant sur le bouton SOURCE de la télécommande du moniteur LED. • Redémarrez le périphérique qui est branché en reconnectant son câble d'alimentation. Connexion RF (câble/antenne) Le moniteur LED ne reçoit pas toutes les chaînes. • Vérifiez que le câble de l'antenne est correctement branché. • Utilisez la Configuration (Configuration initiale) pour ajouter des chaînes à la liste des chaînes. Accédez à MENU - Système - Configuration (Configuration initiale) et attendez que toutes les chaînes disponibles soient enregistrées. • Vérifiez la position de l'antenne. L'image est déformée : erreur macro bloc, petit bloc, points, pixellisation. • La compression du contenu vidéo peut déformer l'image, notamment les images animées rapides (manifestations sportives ou films d'action, par exemple). • Un signal faible peut déformer l'image. Le moniteur LED n'est pas à l'origine du problème. Autres L'image n'occupe pas tout l'écran. • Les chaînes HD affichent des barres noires de chaque côté de l'écran lors de l'affichage de contenu SD converti (4:3). • Des barres noires apparaissent en haut et en bas lors de la diffusion de films dont le format est différent de celui du moniteur LED. • Réglez les options de format d'image sur le périphérique externe ou le moniteur LED pour utiliser le format Plein écran. La télécommande ne fonctionne pas. • Réinstallez les piles de la télécommande en respectant la polarité (+/–). • Nettoyez la fenêtre de transmission du capteur de la télécommande. • Pointez la télécommande directement vers le moniteur LED à environ 1,5 m - 2 m de distance. La télécommande du câble/décodeur ne met pas le moniteur LED sous tension ou hors tension ou ne permet pas de régler le volume. • Programmez la télécommande pour pouvoir faire fonctionner le moniteur LED. Reportez-vous au manuel d'utilisation du câble/décodeur pour le code du moniteur LED SAMSUNG. Un message de type « Mode non pris en charge » apparaît. • Vérifiez la résolution prise en charge par le moniteur LED et réglez en conséquence la résolution de sortie du périphérique externe. Le moniteur LED dégage une odeur de plastique. • Cette situation est normale et disparaît par la suite. Les informations de signal du moniteur LED ne figurent pas dans le menu de test Diagnost. auto.. • Cette fonction n'est disponible qu'avec les chaînes numériques et une connexion Antenne/RF/Coaxiale. Le moniteur LED penche vers la droite ou vers la gauche. • Retirez la base du support du moniteur LED et réinstallez-la. L'assemblage de la base du support pose problème. • Veillez à placer le moniteur LED sur une surface plane. Si vous ne parvenez pas à retirer les vis du moniteur LED, utilisez un tournevis aimanté. Le menu Canal est estompé (indisponible). • Le menu Canal est disponible uniquement lorsque la source du moniteur LED est sélectionnée. Les paramètres sont perdus après 30 minutes ou chaque fois que le moniteur LED est mis hors tension. • Si le moniteur LED fonctionne en mode Util. magasin, il réinitialise les paramètres audio et d'image toutes les 30 minutes. Remplacez le mode Util. magasin par Util. domicile dans la procédure Configuration (Configuration initiale). Appuyez sur le bouton SOURCE pour sélectionner le mode TV puis accédez à MENU → Système → Configuration (Configuration initiale) →ENTERE. Perte audio ou vidéo intermittente. • Vérifiez les branchements des câbles et reconnectez-les. • Une perte audio ou vidéo peut être provoquée par un câble très rigide ou épais. Vérifiez que les câbles sont suffisamment souples pour durer. Si vous fixez le moniteur LED sur un mur, nous recommandons d'utiliser des câbles avec des connecteurs à 90 degrés. De petites particules apparaissent lorsque vous regardez de près le bord du cadre du moniteur LED. • Cela est inhérent à la conception du produit ; il ne s'agit pas d'un défaut.Français 43 Autres informations Problèmes Solutions et explications Le menu PIP n'est pas disponible. • La fonctionnalité PIP est disponible uniquement lorsque vous utilisez une source HDMI. Vous avez mis hors tension le moniteur LED il y a 45 minutes et vous l'avez remis sous tension. • Cela est normal. Le moniteur LED active la fonction OTA (Over The Antenne) pour mettre à niveau le microprogramme téléchargé lorsque vous regardez le moniteur LED. Un message de type « Signal brouillé» ou « Signal faible / Pas de signal» apparaît. • Si vous utilisez une CARTE CAM (CI/CI+), vérifiez qu'elle est installée dans l'emplacement d'interface commune. • Si le problème persiste, retirez la CARTE CAM du moniteur LED et réinsérez-la dans son logement. Problèmes d'image ou de son récurrents. • Vérifiez et changez le signal/la source. Une réaction peut se produire entre les patins en caoutchouc sur le support de base et la surface de certains meubles. • Pour éviter ce problème, utilisez des patins en feutre sur n'importe quelle surface du moniteur LED qui entre en contact direct avec le meuble. ✎Cet écran utilise une dalle constituée de sous-pixels qui sont produits par une technologie complexe. Toutefois, l'écran peut laisser apparaître quelques pixels clairs ou sombres. Ces pixels n'ont aucun impact sur les performances du produit. ¦ Stockage et maintenance ✎Si vous apposez un adhésif sur le moniteur LED, des traces apparaissent lorsque vous retirez l'adhésif. Nettoyez le moniteur LED. ✎La partie extérieure et l'écran du produit peuvent subir des rayures lorsque vous les nettoyez. Veillez à nettoyez la partie extérieure et l'écran avec soin en utilisant le chiffon fourni ou un chiffon doux pour éviter les rayures. Ne projetez pas de l'eau ou un agent nettoyant sur le produit. La pénétration d'un liquide dans le produit peut entraîner un dysfonctionnement, un incendie ou une électrocution. Nettoyez le produit avec un chiffon doux légèrement humide. [ATTENTION Si la hauteur A sur un côté est différente de celle de l'autre côté, ajustez la hauteur.Français 44 Autres informations ¦ Licence TheaterSound HD, SRS and the symbol are trademarks of SRS Labs, Inc. TheaterSound HD technology is incorporated under licence from SRS Labs, Inc. Fabriqué sous licence de Dolby Laboratories. Dolby et le symbole double D sont des marques de Dolby Laboratories. 2.0 Channel Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. (Disponible uniquement sur les produits de la série TB300) Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product Includes software. © DTS, Inc. All Rights Reserved. (Disponible uniquement sur les produits de la série TB350) Avis de licence Open Source Si vous utilisez le logiciel Open Source, la licence Open Source est disponible dans le menu du produit. L'avis de licence Open Source est rédigé en anglais uniquement. ¦ DEEE Traitement correct des déchets d’équipements électriques et électroniques (DEEE) (Applicable dans l'Union Européenne et d'autres pays européens ayant des programmes de collecte distincts) Ce symbole sur le produit, les accessoires ou documents indique que le produit et ses accessoires électroniques (chargeur, casque, câble USB, par exemple) ne doivent pas être jetés dans les ordures ménagères à la fin de leur vie. Pour éviter toute pollution environnementale ou atteinte à la santé des personnes générée par la mise au rebut incontrôlée des déchets, séparez ces éléments des autres déchets et recyclez-les de manière responsable pour permettre la réutilisation des ressources matérielles. Les particuliers doivent contacter le distributeur auprès duquel ils ont acheté le produit ou leur mairie pour savoir où et comment le faire recycler correctement afin de protéger l'environnement. Les entreprises doivent contacter leur fournisseur et vérifiez les conditions du contrat d'achat. Ce produit et ses accessoires électroniques ne doivent pas être mélangés avec les autres déchets de produits commerciaux pour la mise au rebut. Mise au rebut correcte des batteries du produit (Applicable dans l'Union Européenne et d'autres pays européens ayant des programmes distincts de retour des batteries) Ce symbole sur la batterie, le manuel ou l'emballage indique que la batterie du produit ne doit pas être jetée dans les ordures ménagères à la fin de sa vie. Les symboles chimiques Hg, Cd et Pb indiquent, lorsqu'ils sont présents, que la batterie contient des niveaux de mercure, de cadmium ou de plomb supérieurs aux niveaux de référence dans la directive EC 2006/66. Si les batteries ne sont pas mises correctement au rebut, ces substances peuvent avoir un impact sur la santé des personnes ou l'environnement. Pour protéger les ressources naturelles et promouvoir la réutilisation des matériaux, séparez les batteries des autres types de déchets et recyclez-les via votre programme local gratuit de retour des batteries.Français 45 Autres informations Spécifications Considérations environnementales Fonctionnement Température : 10 °C ~ 40 °C (50°F ~ 104°F) Humidité : 10 % ~ 80 %, sans condensation Stockage Température : -20 °C ~ 45 °C (-4°F ~ 113°F) Humidité : 5 % ~ 95 %, sans condensation Basculement -1°(±2°) ~ 20°(±2°) Moniteur LED Analogique : B/G, D/K, L, I (selon le pays sélectionné) Numérique : DVB-T/DVB-C Système couleur/vidéo Analogique : PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60 Numérique : MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0 Système audio BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC ENTRÉE HDMI Vidéo : 1080 24p, 1080p, 1080i, 720p, 576p, 480p Audio : 2Ch Linear PCM 32/44.1/48 kHz, 16/20/24 bits. Nom du modèle T19B300 T22B300 T24B300 T27B300 Taille de l'écran (diagonale) 18,5 pouces (47 cm) 21,5 pouces (55 cm) 23,6 pouces (60 cm) 27 pouces (69 cm) Résolution d'affichage 1366 x 768 à 60 Hz 1920 x 1080 à 60 Hz Son (sortie) 5W × 2 Dimensions (L x P x H) (Sans support) 444,7 x 52,6 x 278,2 mm (17,5 x 2,1 x 11,0 pouces) 509,7 x 51,5 x 318,2 mm (20,1 x 2,0 x 12,5 pouces) 569,2 x 53,4 x 349,4 mm (22,4 x 2,1 x 13,8 pouces) 643,3 x 53,4 x 397,9 mm (25,3 x 2,1 x 15,7 pouces) (Avec support) 444,7 x 187 x 356,4 mm (17,5 x 7,4 x 14,0 pouces) 509,7 x 195 x 396,6 mm (20,1 x 7,7 x 15,6 pouces) 569,2 x 195 x 428 mm (22,4 x 7,7 x 16,9 pouces) 643,3 x 252 x 476,5 mm (25,3 x 9,9 x 18,8 pouces) Poids (Sans support) 2,95 kg (6,5 Ibs) 3,7 kg (8,2 Ibs) 4,25 kg (9,4 Ibs) 5,1 kg (11,2 Ibs) (Avec support) 3,2 kg (7,1 Ibs) 3,95 kg (8,7 Ibs) 4,5 kg (9,9 Ibs) 5,6 kg (12,3 Ibs) Nom du modèle T22B350 T23B350 T24B350 Taille de l'écran (diagonale) 21,5 pouces (55 cm) 23 pouces (58 cm) 24 pouces (61 cm) Résolution d'affichage 1920 x 1080 à 60 Hz Son (sortie) 5W × 2 Dimensions (L x P x H) (Sans support) 509,7 x 51,5 x 318,2 mm (20,1 x 2,0 x 12,5 pouces) 547,5 x 53,4 x 337,9 mm (21,6 x 2,1 x 13,3 pouces) 569,2 x 53,4 x 349,4 mm (22,4 x 2,1 x 13,8 pouces) (Avec support) 509,7 x 195 x 396,6 mm (20,1 x 7,7 x 15,6 pouces) 547,5 x 195 x 416,1 mm (21,6 x 7,7 x 16,4 pouces) 569,2 x 195 x 428 mm (22,4 x 7,7 x 16,9 pouces) Poids (Sans support) 3,7 kg (8,2 Ibs) 3,25 kg (7,2 Ibs) 4,15 kg (9,1 Ibs) (Avec support) 3,95 kg (8,7 Ibs) 3,5 kg (7,7 Ibs) 4,45 kg (9,8 Ibs) ✎REMARQUE x La conception et les spécifications peuvent être modifiées sans préavis. x Pour plus d'informations sur l'alimentation et la consommation électriques, reportez-vous à l'étiquette apposée sur le produit. x Certains modèles peuvent ne pas être commercialisés dans votre région. x Si le produit ne dispose pas d'un interrupteur d'alimentation, la consommation est nulle lorsque le cordon d'alimentation est débranché. x DPM (Display Power Management) La fonction n'est pas disponible si elle est utilisée avec le port HDMI IN (DVI) du produit.Contacter SAMSUNG Pour toute question ou commentaire concernant les produits Samsung, veuillez contacter le Service Consommateurs SAMSUNG. Pays Service Consommateurs Site Web EUROPE ALBANIA 42 27 5755 http://www.samsung.com AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) http://www.samsung.com BELGIUM 02-201-24-18 http://www.samsung.com/be (Dutch) http://www.samsung.com/be_fr (French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 http://www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com Samsung Electronics Czech and Slovak, s.r.o.,Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8 DENMARK 70 70 19 70 http://www.samsung.com FINLAND 030 - 6227 515 http://www.samsung.com FRANCE 01 48 63 00 00 http://www.samsung.com GERMANY 01805 - SAMSUNG (726-7864, € 0,14/Min) http://www.samsung.com CYPRUS From landline : 8009 4000 http://www.samsung.com GREECE From landline : 80111-SAMSUNG (7267864) From landline & mobile : (+30)210 6897691 http://www.samsung.com HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.com ITALIA 800-SAMSUNG (726-7864) http://www.samsung.com KOSOVO +381 0113216899 http://www.samsung.com LUXEMBURG 261 03 710 http://www.samsung.com MACEDONIA 023 207 777 http://www.samsung.com MONTENEGRO 020 405 888 http://www.samsung.com NETHERLANDS 0900-SAMSUNG (0900-7267864) ( € 0,10/Min) http://www.samsung.com NORWAY 815-56 480 http://www.samsung.com POLAND 0 801-1SAMSUNG (172-678) +48 22 607-93-33 http://www.samsung.com PORTUGAL 80820-SAMSUNG (808207267) http://www.samsung.com RUMANIA From landline : 08010-SAMSUNG (7267864) From landline & mobile : (+40)21 206 01 10 http://www.samsung.com SERBIA 0700 SAMSUNG (0700 726 7864) http://www.samsung.com SLOVAKIA 0800 - SAMSUNG (0800-726 786) www.samsung.com/sk SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) http://www.samsung.com/ch http://www.samsung.com/ch_fr (French) U.K 0330 SAMSUNG (7267864) http://www.samsung.com EIRE 0818 717100 http://www.samsung.com LITHUANIA 8-800-77777 http://www.samsung.com LATVIA 8000-7267 http://www.samsung.com ESTONIA 800-7267 http://www.samsung.com TURKEY 444 77 11 http://www.samsung.com CIS RUSSIA 8-800-555-55-55 http://www.samsung.com GEORGIA 8-800-555-555 http://www.samsung.com ARMENIA 0-800-05-555 http://www.samsung.com AZERBAIJAN 088-55-55-555 http://www.samsung.com KAZAKHSTAN 8-10-800-500-55-500(GSM: 7799) http://www.samsung.com UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.com KYRGYZSTAN 00-800-500-55-500 http://www.samsung.comPays Service Consommateurs Site Web MONGOLIA http://www.samsung.com UKRAINE 0-800-502-000 http://www.samsung.com/ua http://www.samsung.com/ua_ru BELARUS 810-800-500-55-500 http://www.samsung.com MOLDOVA 00-800-500-55-500 http://www.samsung.com ASIA PACIFIC AUSTRALIA 1300 362 603 http://www.samsung.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com CHINA 400-810-5858 http://www.samsung.com HONG KONG (852) 3698 - 4698 http://www.samsung.com/hk http://www.samsung.com/hk_en/ INDIA 1800 1100 11 3030 8282 1800 3000 8282 1800 266 8282 http://www.samsung.com INDONESIA 0800-112-8888 021-5699-7777 http://www.samsung.com JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com PHILIPPINES 1-800-10-SAMSUNG (726-7864) for PLDT 1-800-3-SAMSUNG(726-7864) for Digitel 1-800-8-SAMSUNG(726-7864) for Globe02-5805777 http://www.samsung.com SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com THAILAND 1800-29-3232 02-689-3232 http://www.samsung.com TAIWAN 0800-329-999 0266-026-066 http://www.samsung.com VIETNAM 1 800 588 889 http://www.samsung.com MIDDLE EAST IRAN 021-8255 http://www.samsung.com OMAN 800-SAMSUNG(726-7864) http://www.samsung.com KUWAIT 183-2255 http://www.samsung.com BAHRAIN 8000-4726 http://www.samsung.com EGYPT 08000-726786 http://www.samsung.com JORDAN 800-22273 http://www.samsung.com MOROCCO 080 100 2255 http://www.samsung.com SAUDI ARABIA 9200-21230 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com AFRICA CAMEROON 7095- 0077 http://www.samsung.com COTE D’ IVOIRE 8000 0077 http://www.samsung.com GHANA 0800-10077 http://www.samsung.com 0302-200077 KENYA 0800 724 000 http://www.samsung.com NIGERIA 0800-726-7864 http://www.samsung.com SENEGAL 800-00-0077 http://www.samsung.com SOUTH AFRICA 0860-SAMSUNG(726-7864) http://www.samsung.com TANZANIA 0685 88 99 00 http://www.samsung.com UGANDA 0800 300 300 http://www.samsung.com UGANDA 0800 300 300 http://www.samsung.com © 2012 Samsung Electronics Co., Ltd. Tous droits réservés. BN46-00196C-03 LED-TV-MONITOR (MFM TV) Benutzerhandbuch Vielen Dank, dass Sie sich für den Kauf dieses Samsung-Produkts entschieden haben. Um den umfassenden Kundendienst nutzen zu können, registrieren Sie Ihr Gerät bitte unter www.samsung.com/register TB300 TB350Deutsch 2 Die Abbildungen und Illustrationen in diesem Benutzerhandbuch dienen nur als Beispiel und können vom tatsächlichen Produkt abweichen. Produktdesign und -spezifikationen können jederzeit ohne Ankündigung geändert werden. Hinweis für den digitalen LED-Bildschirm 1. Die Digital-TV (DVB)-Funktionen sind nur in Ländern/Regionen verfügbar, in denen digitale terrestrische DVB-T (MPEG2 und MPEG4 AVC)-Signale ausgestrahlt werden oder in denen ein kompatibler DVB-C (MPEG2 und MPEG4 AAC)-Kabelfernsehdienst verfügbar ist. Ihr lokaler Händler kann Ihnen Auskunft zur Verfügbarkeit eines DVB-T- oder DVB-C-Signals geben. 2. DVB-T ist der Sendestandard für digitales terrestrisches Fernsehen des europäischen Konsortiums, und DVB-C ist der Standard für die Ausstrahlung für digitale LED-Bildschirme über Kabel. 3. Dieser LED-Bildschirm hält alle aktuellen DVB-T- und DVB-C-Standards ein [Stand August 2008], eine Kompatibilität mit zukünftigen DVB-T digitalen terrestrischen Signalen und DVB-C digitalen Kabelsignalen kann jedoch nicht gewährleistet werden. 4. In einigen Ländern/Regionen, in denen dieses LED-Gerät verwendet wird, fallen möglicherweise zusätzliche Kosten für solche Dienste an, und Sie müssen ggf. den Nutzungsbedingungen der entsprechenden Kabelanbieter zustimmen. 5. Es sind möglicherweise nicht alle Funktionen des digitalen LED-Bildschirms in allen Ländern und Regionen verfügbar, und DVB-C funktioniert möglicherweise nicht in Verbindung mit einigen Kabeldienstanbietern. 6. Weitere Informationen erhalten Sie bei Ihrem lokalen Samsung-Kundendienstcenter. ✎ Die Empfangsqualität des LED-Bildschirms kann durch die unterschiedlichen Übertragungsmethoden verschiedener Länder beeinträchtigt werden. Fragen Sie bei Ihrem lokalen autorisierten SAMSUNG-Händler oder dem Samsung-Callcenter nach, ob die LED-Anzeigequalität durch Anpassen der Einstellungen verbessert werden kann. Standbildwarnung Zeigen Sie keine Standbilder (z. B. JPEG-Bilder) oder Standbildelemente (z. B. LED-Anzeigeprogrammlogo, Panorama- oder 4:3-Bildformat, Börsen- oder Nachrichtenticker am Bildschirmrand usw.) auf dem Bildschirm an. Wenn Sie zu oft Standbilder anzeigen, kann ein Nachbild entstehen und dies die Bildqualität beeinträchtigen. Befolgen Sie die folgenden Empfehlungen, um dieses Risiko zu mindern: • Zeigen Sie denselben LED-Anzeigekanal nicht zu lange an. • Zeigen Sie Bilder nach Möglichkeit im Vollbildmodus an, und verwenden Sie für eine optimale Anzeige das Bildformatmenü des LED-Bildschirms. • Verwenden Sie die für die gewünschte Bildqualität minimalen Einstellungen für Helligkeit und Kontrast; durch höhere Werte kann der Burnout-Prozess beschleunigt werden. • Verwenden Sie regelmäßig alle Funktionen des LED-Bildschirms zur Vermeidung von Nachbildern und Bildschirm-Burnout. Weitere Informationen finden Sie im entsprechenden Abschnitt des Benutzerhandbuchs. Absichern des Einbaubereichs Halten Sie die erforderlichen Abstände zwischen dem Gerät und anderen Gegenständen (z. B. Wände) ein, um eine ausreichende Belüftung zu gewährleisten. Anderenfalls kann es zu einem Brand oder Problem mit dem Gerät aufgrund eines Anstiegs der Innentemperatur des Geräts kommen. ✎ Das tatsächliche Erscheinungsbild des LED-Bildschirms kann je nach Modell von den Abbildungen in diesem Handbuch abweichen. ✎ Seien Sie vorsichtig, wenn Sie den LED-Bildschirm berühren. Einige Teile können heiß werden. Installation mit Standfuß Installation mit Wandhalterung 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm • Verwaltungskosten werden abgerechnet, wenn – (a) auf Ihren Wunsch ein Ingenieur zu Ihnen geschickt wird, und es liegt kein Defekt des Geräts vor. (d. h. wenn Sie dieses Benutzerhandbuch nicht gelesen haben). – (b) Sie das Gerät in eine Reparaturwerkstatt bringen, und es liegt kein Defekt des Geräts vor. (d. h. wenn Sie dieses Benutzerhandbuch nicht gelesen haben). • Der abzurechnende Betrag wird Ihnen mitgeteilt, ehe irgendwelche Arbeiten oder Kundenbesuche ausgeführt werden.3 DEUTSCH Deutsch Achten Sie auf diese Symbole. Sie können auf diese Funktion zugreifen, indem Sie die Taste t TOOLST auf der Fernbedienung drücken. Hinweis Dieses Symbol weist auf zusätzliche Informationen hin. Inhaltsverzeichnis Erste Schritte 4 4 Sicherheitshinweise 11 Zubehör 12 Die Bedientasten 13 Die Fernbedienung Anschlüsse 14 14 Anschließen einer Antenne 14 Einstell. (Inbetriebnahme) 15 Anschließen eines AV-Geräts 16 Anschließen einer COMMON INTERFACE-Karte 17 Anschließen eines Audiogeräts und eines PCs 19 Ändern der Eingangsquelle Grundfunktionen 19 19 Menünavigation 20 Verwenden der INFO -Taste (Programmführer) 20 Verwenden des Sendermenüs 22 Sendermenü 23 Bildmenü 25 Tonmenü 27 Systemmenü 30 Unterstützungsmenü Erweiterte Funktionen 31 31 Verwendung von Media Play Weitere Informationen 38 38 Teletextfunktion für Analogsender 39 Befestigen einer Wandhalterung/eines Standfußes 40 Kensington-Schloss zur Diebstahlsicherung 41 Fehlerbehebung 45 Technische Daten4 Erste Schritte Deutsch Sicherheitshinweise Bei den Sicherheitshinweisen verwendete Symbole WARNUNG Wenn Sie die mit diesem Symbol versehenen Anweisungen nicht befolgen, kann dies schwere Verletzungen bis hin zum Tod nach sich ziehen. ACHTUNG Wenn Sie die mit diesem Symbol versehenen Anweisungen nicht befolgen, kann dies Verletzungen oder Sachschäden nach sich ziehen. Unterlassen. Unbedingt beachten. ACHTUNG GEFAHR VON STROMSCHLÄGEN, NICHT ÖFFNEN ACHTUNG: ENTFERNEN SIE DIE ABDECKUNG (ODER RÜCKWÄRTIGE ABDECKUNG) NICHT, UM DIE GEFAHR VON STROMSCHLÄGEN ZU MINDERN. ES BEFINDEN SICH KEINE VOM ANWENDER NUTZBAREN TEILE IM INNEREN. ÜBERLASSEN SIE DIE REPARATUR DEM AUSGEBILDETEN FACHPERSONAL. Dieses Symbol weist auf Hochspannung im Inneren des Geräts hin. Die internen Teile dieses Geräts dürfen nicht berührt werden; es besteht die Gefahr eines elektrischen Schlags. Dieses Symbol weist auf wichtige beigefügte Lektüre zur Bedienung und Wartung dieses Produkts hin. ¦ Informationen zur Stromversorgung ✎ Die folgenden Abbildungen dienen zu Referenzzwecken und können je nach Modell und Land abweichen. Warnung Verwenden Sie weder beschädigte Steckdosen noch defekte Netzkabel oder Stecker. x Anderenfalls kann ein elektrischer Schlag oder Brand verursacht werden. Schließen Sie keinesfalls mehrere Elektrogeräte an eine einzige Steckdose an. x Anderenfalls kann es zu Bränden aufgrund von Überhitzung der Steckdose kommen. Berühren Sie den Netzstecker nie mit nassen Händen. x Anderenfalls kann ein elektrischer Schlag verursacht werden. ! Achten Sie auf eine feste Verbindung des Steckers. x Anderenfalls kann ein Brand verursacht werden. ! Schließen Sie das Netzkabel nur an eine geerdete Steckdose (für Geräte der Isolationsklasse 1) an. x Anderenfalls kann dies zu einem elektrischen Schlag oder Verletzungen führen. Verbiegen und verdrehen Sie das Netzkabel nicht übermäßig, und stellen Sie keine schweren Gegenstände auf dem Kabel ab. x Anderenfalls kann es durch eine Beschädigung des Netzkabels zu Stromschlägen oder Bränden kommen. Erste Schritte5 Erste Schritte Deutsch Platzieren Sie das Netzkabel und das Gerät nicht in der Nähe von Heizkörpern. x Anderenfalls kann ein elektrischer Schlag oder Brand verursacht werden. ! Entfernen Sie Staub am Netzstecker oder auf der Steckdose mit einem trockenen Tuch. x Anderenfalls kann ein Brand verursacht werden. Achtung Ziehen Sie den Netzstecker nicht aus der Steckdose, während das Gerät eingeschaltet ist. x Anderenfalls kann das Gerät durch Stromschläge beschädigt werden. ! Verwenden Sie nur Netzkabel des Originalherstellers. Verwenden Sie außerdem nie das Netzkabel eines anderen Geräts. x Anderenfalls kann ein elektrischer Schlag oder Brand verursacht werden. ! Fassen Sie das Netzkabel am Stecker und nicht am Kabel an, wenn Sie es aus der Wandsteckdose ziehen. x Anderenfalls kann ein elektrischer Schlag oder Brand verursacht werden. ! Schließen Sie den Netzstecker an eine leicht zugängliche Wandsteckdose an. x Wenn ein Problem mit dem Gerät auftritt, müssen Sie den Netzstecker aus der Steckdose ziehen, um die Stromzufuhr vollständig zu unterbrechen. Die Stromzufuhr kann durch den Netzschalter nicht völlig unterbrochen werden. ¦ Informationen zur Installation Warnung Platzieren Sie keine brennenden Kerzen, Insektenschutzmittel oder Zigaretten auf dem Gerät. x Anderenfalls kann ein Brand verursacht werden. ! Bitten Sie einen Installationstechniker oder ein entsprechendes Unternehmen, das Gerät an der Wand anzubringen. x Anderenfalls kann es zu Verletzungen kommen. x Verwenden Sie nur die spezifizierte Wandhalterung. Stellen Sie das Gerät nicht an einem schlecht belüfteten Standort auf, z. B. innerhalb eines Regals oder Schranks. x Anderenfalls kann es zu Bränden aufgrund von Überhitzung kommen. ! Bewahren Sie die Verpackungsfolien des Geräts außer Reichweite von Kindern auf. x Wenn Kinder sich die Plastikbeutel über den Kopf ziehen, besteht Erstickungsgefahr. Stellen Sie das Gerät nicht an instabilen oder geneigten Stellen (z. B. einem schief stehenden Regal) oder an Stellen auf, wo es starken Vibrationen ausgesetzt ist. x Anderenfalls könnte das Gerät herunterfallen und beschädigt werden oder Verletzungen verursachen. x Bei Verwendung des Geräts an Stellen mit starker Vibration besteht Brandgefahr und die Möglichkeit von Störungen des Geräts. ! Stellen Sie das Gerät nicht in einem Fahrzeug oder an Orten auf, an denen es Staub, Feuchtigkeit (Sauna), Öl, Rauch oder Wasser (Regenwasser) ausgesetzt ist. x Dadurch kann ein elektrischer Schlag oder Brand verursacht werden.6 Erste Schritte Deutsch Stellen Sie das Gerät nicht in der Nähe von Feuerstellen oder Heizkörpern bzw. an Orten auf, wo es direkter Sonneneinstrahlung ausgesetzt ist. x Es besteht andernfalls Brandgefahr, außerdem wird dadurch u. U. die Lebensdauer des Produkts verkürzt. Stellen Sie das Gerät nicht an einem Ort auf, der in leichter Reichweite von Kindern ist. x Wenn ein Kind das Gerät berührt, könnte es herunterfallen und Verletzungen verursachen. x Da der vordere Teil des Geräts schwerer als der hintere Teil ist, muss das Gerät auf einer ebenen und stabilen Fläche aufgestellt werden. ! Lassen Sie das Antennenkabel an der Stelle, an der es nach innen geführt wird, nach unten hängen, damit kein Regenwasser eindringen kann. x Wenn Regenwasser in das Gerät eindringt, kann ein elektrischer Schlag oder Brand verursacht werden. ! Installieren Sie die Antenne in größerer Entfernung von Hochspannungskabeln. x Wenn die Antenne auf ein Hochspannungskabel fällt oder sie berührt, kann ein elektrischer Schlag oder Brand verursacht werden. Achtung ! Lassen Sie das Gerät beim Transport nicht fallen. x Dies führt evtl. zu einem Problem mit dem Gerät oder zu Verletzungen. Stellen Sie das Gerät nicht mit dem Bildschirm nach unten auf den Fußboden. x Dadurch kann die Anzeige des Geräts beschädigt werden. Achten Sie beim Aufstellen des Geräts in einem Schrank oder auf einem Regal darauf, dass die Vorderseite des Geräts nicht über die Vorderkante herausragt. x Anderenfalls kann das Gerät herunterfallen und dadurch Störungen oder Verletzungen verursachen. x Verwenden Sie nur Schränke oder Regale mit einer für das Gerät geeigneten Größe. ! Setzen Sie das Gerät vorsichtig ab. x Anderenfalls führt dies evtl. zu einem Problem mit dem Gerät oder zu Verletzungen. SAMSUNG ! Wenn Sie das Gerät an einem Ort aufstellen, an dem die Betriebsbedingungen stark schwanken, kann es aufgrund von Umgebungseinflüssen zu gravierenden Qualitätsproblemen kommen. Stellen Sie das Gerät in diesem Fall erst auf, nachdem Sie sich diesbezüglich mit einem unserer Servicetechniker beraten haben. x Orte mit Feinstaub- oder Chemikalienbelastung, niedrigen bzw. hohen Temperaturen oder starker Feuchtigkeit (wie z. B. an Flughäfen oder Bahnhöfen), wo das Gerät lange Zeit ununterbrochen eingeschaltet ist.7 Erste Schritte Deutsch ¦ Informationen zur Reinigung Warnung ! Ziehen Sie das Netzkabel ab, bevor Sie das Gerät reinigen. x Anderenfalls kann ein elektrischer Schlag oder Brand verursacht werden. Spritzen Sie beim Reinigen kein Wasser direkt auf Teile des Geräts. x Achten Sie darauf, dass kein Wasser in das Gerät eindringt. x Anderenfalls führt dies evtl. zu einem Brand, elektrischen Schlag oder Problem mit dem Gerät. Achtung Sprühen Sie keine Reinigungsmittel direkt auf das Gerät. x Anderenfalls kann es zu Verfärbungen oder zum Reißen der Außenflächen des Geräts bzw. zur Ablösung der Anzeigefläche kommen. ! Trennen Sie vor dem Reinigen des Geräts das Netzkabel, und reinigen Sie es dann mit dem beigefügten Reinigungstuch. x Verwenden Sie beim Reinigen des Geräts keine Chemikalien wie Wachs, Benzin, Alkohol, Verdünner, Insektenschutzmittel, Duftstoffe oder Schmier- bzw. Reinigungsmittel.  Dies kann zu Beschädigungen der Außenflächen des Geräts oder zur Ablösung von Aufdrucken führen. ! Wischen Sie das Gerät mit einem weichen, feuchten Tuch und einem "Spezialreiniger für Monitore" ab, wenn Sie es nur mit dem beigefügten Tuch nicht reinigen können. x Wenn kein Spezialreiniger für Monitore zur Verfügung steht, verdünnen Sie ein Reinigungsmittel im Verhältnis 1:10 mit Wasser, bevor Sie das Gerät reinigen. ! Da die Außenflächen des Geräts leicht zerkratzt werden können, verwenden Sie zum Reinigen nur das beigefügte Reinigungstuch. ¦ Informationen zur Verwendung Warnung Dieses Gerät führt Hochspannung. Sie dürfen das Gerät nicht selbst öffnen, reparieren oder verändern. x Anderenfalls kann ein Brand oder elektrischer Schlag verursacht werden. x Wenn das Gerät repariert werden muss, wenden Sie sich an ein Kundendienstzentrum. ! Schalten Sie das Gerät aus, und ziehen Sie den Netzstecker, das Antennenkabel und sonstige Kabel ab, bevor Sie das Gerät transportieren. x Anderenfalls kann es durch eine Beschädigung des Netzkabels zu Stromschlägen oder Bränden kommen.8 Erste Schritte Deutsch ! Sollte das Gerät ungewöhnliche Geräusche erzeugen, Brandgeruch auftreten oder Rauch zu sehen sein, ziehen Sie sofort das Netzkabel aus der Steckdose und wenden Sie sich an ein Kundendienstzentrum. x Anderenfalls kann ein elektrischer Schlag oder Brand verursacht werden. Achten Sie sorgfältig darauf, dass sich Kinder niemals an das Gerät hängen oder darauf herumklettern. x Anderenfalls könnte das Gerät herunterfallen und so Verletzungen oder den Tod verursachen. Wenn Ihnen das Gerät herunterfällt oder wenn das Gehäuse beschädigt ist, schalten Sie es aus, und ziehen Sie den Netzstecker. Wenden Sie sich an ein Kundendienstzentrum. x Anderenfalls kann ein Brand oder elektrischer Schlag verursacht werden. Legen Sie keine Gegenstände wie Spielzeug oder Kekse auf das Gerät. x Wenn sich ein Kind an das Gerät hängt, um solche Gegenstände zu greifen, könnten diese Gegenstände oder das Gerät herunterfallen und Verletzungen oder gar den Tod verursachen. ! Ziehen Sie bei Gewitter den Netzstecker, und berühren Sie unter keinen Umständen des Antennenkabel, da dies gefährlich sein kann. x Anderenfalls kann ein elektrischer Schlag oder Brand verursacht werden. ! Lassen Sie keine Gegenstände auf das Gerät fallen und keine Schläge darauf einwirken. x Anderenfalls kann ein elektrischer Schlag oder Brand verursacht werden. Tragen Sie das Gerät nicht am Netz- oder Antennenkabel. x Anderenfalls kann es durch Beschädigungen des Kabels zu Problemen mit dem Gerät oder zu elektrischen Schlägen und Bränden kommen. ! GAS Berühren Sie bei Austritt von Gas weder das Gerät noch den Netzstecker, sondern lüften Sie die Räumlichkeiten sofort. x Anderenfalls kann durch Funkenflug eine Explosion oder ein Brand verursacht werden. x Berühren Sie bei Gewitter niemals das Netz- oder Antennenkabel. Heben Sie das Gerät nicht an, und bewegen Sie es nicht, wenn Sie es nur am Netz- oder Signalkabel halten. x Anderenfalls kann es durch Beschädigungen des Kabels zu Problemen mit dem Gerät oder zu elektrischen Schlägen und Bränden kommen. ! Brennbare Sprays oder Objekte dürfen in der Nähe des Geräts weder aufbewahrt noch verwendet werden. x Anderenfalls kann eine Explosion oder ein Brand verursacht werden. Achten Sie darauf, die Lüftungsschlitze nicht durch Tischtücher oder Vorhänge zu versperren. x Anderenfalls kann es zu Bränden aufgrund von Überhitzung kommen. 100 Führen Sie weder Metallgegenstände wie Besteck, Münzen oder Haarnadeln, noch leicht entflammbare Gegenstände (durch Lüftungsschlitze, Anschlüsse usw.) ins Innere des Geräts. x Wenn Wasser oder Fremdstoffe in das Gerät eindringen, schalten Sie es aus, ziehen Sie den Netzstecker, und wenden Sie sich an ein Kundendienstzentrum. x Anderenfalls führt dies evtl. zu einem Brand, elektrischen Schlag oder Problem mit dem Gerät.9 Erste Schritte Deutsch Stellen Sie weder Behälter mit Wasser wie Vasen, Blumentöpfe oder Getränke noch Kosmetika, Medikamente oder Metallteile auf das Gerät. x Wenn Wasser oder Fremdstoffe in das Gerät eindringen, schalten Sie es aus, ziehen Sie den Netzstecker, und wenden Sie sich an ein Kundendienstzentrum. x Anderenfalls führt dies evtl. zu einem Brand, elektrischen Schlag oder Problem mit dem Gerät. Üben Sie keinen übermäßigen Druck auf das Gerät aus. Das Gerät kann sich verformen oder Schäden davontragen. Achtung ! Wenn über einen längeren Zeitraum dasselbe Bild angezeigt wird, kann ein Nachbild oder Fleck entstehen. x Wenn Sie das Gerät für einen längeren Zeitraum nicht verwenden, schalten Sie es in den Ruhezustand, oder verwenden Sie einen bewegten Bildschirmschoner. -_- ! Wenn Sie das Gerät über einen längeren Zeitraum nicht verwenden, weil Sie z. B. verreisen, ziehen Sie das Netzkabel aus der Steckdose. x Anderenfalls könnte sich Staub ansammeln und aufgrund von Überhitzung oder Kurzschluss ein Brand oder elektrischer Schlag entstehen. ! Stellen Sie eine geeignete Auflösung und Frequenz für das Gerät ein. x Anderenfalls kann dies Augenbelastungen verursachen. Stellen Sie das Gerät nicht auf den Kopf, und halten Sie es beim Tragen nicht ausschließlich am Standfuß fest. x Anderenfalls könnte das Gerät herunterfallen und beschädigt werden oder Verletzungen verursachen. ! Wenn Sie ständig aus geringer Entfernung auf das Gerät schauen, kann dies Ihre Sehkraft beeinträchtigen. Verwenden Sie in der Nähe des Geräts keine Luftbefeuchter und Kochgeräte. x Anderenfalls kann ein elektrischer Schlag oder Brand verursacht werden. ! Es ist wichtig, den Augen eine Ruhepause zu geben (5 Minuten pro Stunde), wenn Sie längere Zeit auf den Bildschirm schauen. x So schonen Sie Ihre Augen. Wenn das Gerät längere Zeit eingeschaltet ist, wird der Bildschirm heiß. Fassen Sie das Gerät daher nicht an.10 Erste Schritte Deutsch ! Halten Sie Kleinteile aus der Reichweite von Kindern fern. ! Vorsicht beim Einstellen des Neigungswinkels des Geräts oder der Höhe des Standfußes. x Sie können sich die Hand oder die Finger einklemmen und dadurch verletzen. x Wenn das Gerät zu stark gekippt wird, könnte es herunterfallen und Verletzungen verursachen. Legen Sie keine schweren Gegenstände auf das Gerät. x Anderenfalls führt dies evtl. zu einem Problem mit dem Gerät oder zu Verletzungen. Stellen Sie keine zu hohe Lautstärke ein, wenn Sie Kopfhörer verwenden. x Eine zu hohe Lautstärke kann zu Hörschäden führen. Achten Sie darauf, dass Kinder die Batterien nicht in den Mund nehmen, nachdem diese aus der Fernbedienung entfernt wurden. Bewahren Sie die Batterien für Kinder und Kleinkinder unzugänglich auf. x Wenn Kinder die Batterien in den Mund genommen haben, wenden Sie sich sofort an einen Arzt. ! Achten Sie beim Austauschen der Batterien auf die richtige Polung (+, -). x Anderenfalls könnte die Batterie beschädigt werden oder durch Auslaufen der Flüssigkeit im Innern ein Brand, Verletzungen oder Schäden verursacht werden. Verwenden Sie nur die vorgeschriebenen Standardbatterien. Verwenden Sie keine Kombination aus neuen und gebrauchten Batterien. x Anderenfalls könnten die Batterien beschädigt werden oder durch Auslaufen der Flüssigkeit im Innern ein Brand, Verletzungen oder Schäden verursacht werden. ! Batterien (und Akkus) sind Sondermüll und müssen der Wiederverwertung zugeführt werden. Für die Rückgabe der verbrauchten Batterien und Akkus in das Recyclingsystem ist der Kunde verantwortlich. x Der Kunde kann die verbrauchten Batterien und Akkus bei einem öffentlichen Recycling-Center oder einem Händler abgeben, der den gleichen Batterie- bzw. Akkutyp führt.11 Erste Schritte Deutsch Zubehör ✎Prüfen Sie bitte, ob die nachfolgenden Komponenten mit Ihrem LED-Monitor mitgeliefert wurden. Falls Komponenten fehlen sollten, setzen Sie sich bitte mit Ihrem Händler in Verbindung. ✎Farbe und Form der Komponenten kann sich je nach Modell unterscheiden. ✎Nicht im Lieferumfang enthaltene Kabel sind separat erhältlich. ✎Achten Sie beim Öffnen der Verpackung darauf, dass keine Zubehörteile im Verpackungsmaterial verborgen sind. [ACHTUNG: FEST EINSTECKEN, DAMIT ES SICH NICHT LÖST x Benutzerhandbuch x Kurzanleitung zur Konfiguration x Fernbedienung und Batterien (2x AAA) x Reinigungstuch x Garantiekarte/Sicherheitshinweise (Nicht überall verfügbar) x Netzkabel y Standfußverbinder y Bodenplatte y D-Sub-Kabel y Stereokabel Eingangskabel (separat erhältlich) y HDMI/DVI-Kabel y Audiokabel y Komponentenkabel y Optisches Kabel y HDMI-Kabel12 Erste Schritte Deutsch Die Bedientasten ✎Farbe und Form des Produkts können sich je nach Modell unterscheiden. SOURCE E Wechselt zwischen allen verfügbaren Eingangsquellen. Verwenden Sie diese Taste im OnScreen-Menü wie die Taste ENTERE auf der Fernbedienung. MENU Zeigt ein On-Screen-Menü, das OSD (On-Screen-Display) für die LED-Bildschirmfunktionen, an. Y Passt die Lautstärke an. Verwenden Sie im OSD die Tasten Y wie die Tasten l und r z auf der Fernbedienung. Wechselt den Sender. Verwenden Sie im OSD die Tasten z wie die Tasten u und d auf der Fernbedienung. P (Ein-/Aus-Taste) Schaltet den LED-Bildschirm ein bzw. aus. Stromversorgungsanzeige Blinkt und schaltet sich bei eingeschaltetem Gerät aus; leuchtet im Standby-Modus. Fernbedienungssensor Richten Sie die Fernbedienung auf diesen Punkt auf dem LED-Bildschirm. Standby-Modus Lassen Sie den LED-Bildschirm nicht über längere Zeit (z. B. wenn Sie verreisen) im Standby-Modus. Auch wenn das Gerät ausgeschaltet ist, verbraucht es trotzdem eine geringe Menge Strom. Ziehen Sie den Netzstecker aus der Steckdose. Bedientasten13 Erste Schritte Deutsch Die Fernbedienung ✎Diese Fernbedienung wurde speziell für die Bedürfnisse sehbehinderter Menschen entwickelt und ist auf den Sender- und Nummerntasten mit Blindenschrift ausgestattet. Einlegen der Batterien (Batteriegröße: AAA) Ein- bzw. Ausschalten des Geräts Direktauswahl des Senders Wechsel zwischen Teletext EIN, doppelt, gemischt oder AUS Inhalt der Startseite anzeigen, d. h. Senderliste, TV-Programm, Media Play {Medienwiedergabe}, Progr.-Manager und Quelle Schnellzugriff auf häufig verwendete Funktionen Anzeige des Haupt-On-Screen-Menüs Zurück zum vorherigen Menü PIP: Ein- bzw. Ausschalten von PIP P.SIZE: Auswahl des Bildformats AD/SUBT.: Ein- und Ausschalten von Audio für Sehgeschädigte (nicht überall verfügbar)/Anzeige der digitalen Untertitel Bewegung des Cursors und Auswahl von Elementen Bestätigung von Einstellungen Verwendung gemäß den Anweisungen auf dem Bildschirm Passt die Lautstärke an. Anzeige und Auswahl der verfügbaren Videoquellen Wechsel zum vorherigen Sender Stummschalten Anzeige der Senderliste auf dem Bildschirm Anzeige von EPG (Elektronischer Programmführer) Anzeige von Informationen auf dem Bildschirm Schließen des Menüs Verwendung im Modus Media Play Wechseln des SendersDeutsch 14 Anschlüsse Anschließen einer Antenne Wenn der LED-Bildschirm zum ersten Mal eingeschaltet wird, werden die Grundeinstellungen automatisch konfiguriert. ✎Voreinstellung: Hauptbild und Antenne anschließen. ANT OUT Anschluss für Netzkabel Einstell. (Inbetriebnahme) Wenn der LED-Bildschirm zum ersten Mal eingeschaltet wird, werden Sie durch Bildschirmanweisungen durch die Konfiguration der Grundeinstellungen geleitet. Drücken Sie auf POWERP. Einstell. ist nur verfügbar, wenn als Eingangs Quelle TV ausgewählt ist. ✎Achten Sie vor dem Einschalten des LED-Bildschirms darauf, dass das Antennenkabel angeschlossen ist. 1 Auswahl der Menüsprache Drücken Sie auf u oder d, um die Menüsprache auszuwählen. Drücken Sie 2 Privatgebrauch Shop-Demo Auswahl zwischen und anschließend zweimal auf Drücken Sie auf x Einzelhandel vorgesehen. Wählen Sie den Modus u oder d ENTER , und drücken Sie anschließend auf Privatgebrauch E. aus. Shop-Demo ist nur für den ENTERE. P x So setzen Sie die Einstellungen des Geräts von Shop-Demo auf Privatgebrauch (Standard) zurück: Drücken Sie auf dem LED-Bildschirm die Lautstärketaste. Halten Sie, sobald das Lautstärke-OSD angezeigt wird, die Taste MENU 5 Sekunden lang gedrückt. x Shop-Demo ist nur für Verkaufsumgebungen vorgesehen. Wenn Sie diesen Modus auswählen, sind einige Funktionen nicht verfügbar. Wählen Sie zuhause bitte Privatgebrauch aus. 3 Auswahl der Region Drücken Sie auf ENTERE. Wählen Sie durch Drücken von u oder d die richtige Region aus. Drücken Sie zur Bestätigung auf ENTERE. 4 Autom. Sendersuchlauf Drücken Sie auf u oder d, um die korrekte Option auszuwählen, und drücken Sie anschließend zweimal ENTERE. x Verwendung eines Antennenkabels. Speichert alle über HF-Kabel verfügbaren Sender. (Autom. Sendersuchlauf erforderlich) x Kabel- oder Sat-Empfang. Sie benötigen zur Suche nach Sendern Autom. Sendersuchlauf nicht. ✎ Sie können Einstell. abschließen, indem Sie die Option auswählen. x Terrestrisch / Kabel: Sendertyp zum Speichern auswählen. Digital und Analog / Digital / Analog: Sendertyp zum Speichern auswählen. ✎ Weitere Informationen finden Sie auf Seite 22. 5 Einstellen des Uhrmodus Sie können den Uhrmodus automatisch oder manuell einstellen. x Auto: Wählen Sie Ihre Zeitzone (abhängig vom Land) aus. x Manuell: Sie können Datum und Uhrzeit manuell einstellen. ✎ Wenn Sie unter Schritt 4 die Option „Kabel- oder Sat-Empfang.“ ausgewählt haben, können Sie die Uhr nur manuell einstellen. 6 Abgeschl. Drücken Sie auf ENTERE. So setzen Sie diese Funktion zurück: Wählen Sie System - Einstell. (Inbetriebnahme) aus. Geben Sie Ihre 4-stellige PIN ein. Die Standard-PIN ist „0000“. Sie können die PIN über die Funktion PIN ändern jederzeit ändern. Sie sollten Einstell. (MENU → System) zuhause erneut durchführen, auch wenn Sie es im Laden bereits getan haben. ✎Wenn Sie Ihre PIN vergessen, drücken Sie im Standby-Modus folgende Tasten auf der Fernbedienung, um die PIN auf „0000“ zurückzusetzen: POWER (aus) → MUTE → 8 → 2 → 4 → POWER (ein).Deutsch 15 Anschlüsse Anschließen eines AV-Geräts Mit einem HDMI-Kabel oder HDMI-DVI-Kabel (bis zu 1080p) Verfügbare Geräte: DVD, Blu-ray-Player, HD-Kabelempfänger, HD-STB (Set-Top-Box)-Satellitenempfänger, VCR ✎HDMI IN(DVI)/PC/DVI AUDIO IN x Der Ton funktioniert nicht, wenn ein HDMI/DVI-Kabel an den HDMI IN(DVI)-Anschluss angeschlossen ist. x Das Bild wird möglicherweise nicht normal angezeigt (falls überhaupt), oder Audio funktioniert nicht, wenn ein externes Gerät, das eine ältere Version des HDMI-Modus verwendet, am LED-Bildschirm angeschlossen wird. Wenn ein solches Problem auftritt, fragen Sie den Hersteller des externen Geräts nach der HDMI-Version, und fordern Sie ggf. ein Upgrade an. x Verwenden Sie ein zertifiziertes HDMI-Kabel. Anderenfalls wird möglicherweise kein Bild angezeigt, oder es tritt ein Verbindungsfehler auf. x Ein normales High-Speed-HDMI- oder ein HDMI-Kabel mit Ethernet wird empfohlen. Dieses Gerät unterstützt nicht die Ethernet-Funktion über HDMI. Verwenden eines Scart-Kabels Verfügbare Geräte: DVD, VCR ✎Im Ext.-Modus unterstützt DTV Out nur MPEG SD Video und Ton. DVI OUT HDMI OUT AUDIO OUT W R DVD-/ Blu-ray-Player DVD-/ Blu-ray-Player EXT (RGB) EXT VCR/DVDDeutsch 16 Anschlüsse Verwenden eines Komponentenkabels (bis zu 1080p) oder Audio/Video-Kabels (nur 480i) Verfügbare Geräte: DVD, Blu-ray-Player, Kabelempfänger, STB-Satellitenempfänger, VCR PR PB COMPONENT / AV IN R W R AUDIO OUT R-AUDIO-L VIDEO OUT R W R B G R W R B G R W W W R B R R G Y Y AUDIO OUT R-AUDIO-L COMPONENT OUT PR PB Y R W Y ✎Beim Anschluss an AV IN stimmt die Farbe der AV IN [Y/VIDEO]-Buchse (grün) nicht mit dem Stecker des Videokabels (gelb) überein. ✎Für eine bessere Bildqualität empfehlen wir, ein Komponentenkabel an den A/V-Anschluss anzuschließen. Anschließen einer COMMON INTERFACE-Karte (nur für Europa, die Türkei, Algerien, Südafrika und die Gemeinschaft unabhängiger Staaten) Verwenden der „CI- oder CI+-Karte“ Für die Nutzung von Pay-TV muss die „CI- oder CI+-Karte“ angeschlossen werden. x Wenn Sie die „CI- oder CI+-Karte“ nicht anschließen, wird für einige Sender „Verschlüsseltes Signal“ angezeigt. x Nach etwa 2-3 Minuten werden die Paarungsinformationen einschließlich einer Telefonnummer, der CI- oder CI+-Karten-ID, der Host-ID und weiterer Informationen angezeigt. Wenden Sie sich an Ihren Dienstanbieter, wenn eine Fehlermeldung angezeigt wird. x Nachdem die Konfiguration der Senderinformationen abgeschlossen ist, wird die Meldung „Aktualisierung abgeschlossen“ angezeigt; die Senderliste ist jetzt aktualisiert. ✎HINWEIS x CI- oder CI+-Karten sind bei Ihrem lokalen Kabeldienstanbieter erhältlich. x Wenn Sie die CI- oder CI+-Karte entfernen, ziehen Sie sie vorsichtig mit der Hand heraus, und lassen Sie sie nicht fallen. Anderenfalls kann sie beschädigt werden. x Legen Sie die CI- oder CI+-Karte wie auf der Karte angezeigt ein. x Der COMMON INTERFACE-Steckplatz kann sich je nach Modell an einer anderen Stelle befinden. x Die CI- oder CI+-Karte wird nicht in allen Ländern und Regionen unterstützt. Fragen Sie einen autorisierten Händler. x Wenden Sie sich mit Problemen an einen Dienstanbieter. x Legen Sie eine CI- oder CI+-Karte ein, die die aktuellen Einstellungen des TV-Empfängers unterstützt. Das Bild wird verzerrt oder gar nicht angezeigt. Audiokabel (nicht im Lieferumfang enthalten) Videokabel (nicht im Lieferumfang enthalten) Audiokabel (nicht im Lieferumfang enthalten) Rot Weiß Rot Blau Grün Rot Weiß Gelb Gerät Gerät Komponentenkabel (nicht im Lieferumfang enthalten)Deutsch 17 Anschlüsse Digitales Audiosystem Anschließen eines Audiogeräts und eines PC Verwenden eines optischen (digitalen) Anschlusses oder eines Kopfhöreranschlusses DIGITAL AUDIO OUT (OPTICAL) Die TB300-Serie verfügt nicht über eine Kopfhörer- oder optische Schnittstelle. ✎DIGITAL AUDIO OUT (OPTICAL) x Wenn ein digitales Audiosystem an die DIGITAL AUDIO OUT (OPTICAL)-Buchse angeschlossen wird, senken Sie sowohl die Lautstärke des LED-Bildschirms als auch des Systems. x 5.1-Kanal-Ton ist verfügbar, wenn der LED-Bildschirm an ein externes Gerät angeschlossen ist, das 5.1 unterstützt. x Wenn der Empfänger (Home Theater) eingeschaltet ist, hören Sie die Tonausgabe über die optische Buchse des Geräts. Wenn der Fernseher ein DTV-Signal empfängt, sendet der Fernseher 5.1-Kanal-Ton an den Empfänger des Home Theaters. Wenn es sich bei der Quelle um ein digitales Gerät handelt, z. B. ein DVD- oder Blu-ray-Player, Kabelempfänger oder STB-Satellitenempfänger, das über HDMI an den Fernseher angeschlossen ist, wird nur 2-Kanal-Ton über den Empfänger des Home Theaters wiedergegeben. Wenn Sie 5.1-Kanal-Ton hören möchten, verbinden Sie die digitale Audio-Out-Buchse des DVD- oder Blu-ray-Players, Kabelempfängers oder STBSatellitenempfängers direkt mit einem Verstärker oder einem Home Theater. ✎Kopfhörer H: Sie können Kopfhörer an den Kopfhöreranschluss des Geräts anschließen. Solange Kopfhörer angeschlossen sind, ist der Ton der eingebauten Lautsprecher deaktiviert. x Die Tonfunktionen sind ggf. eingeschränkt, wenn Kopfhörer an den LED-Bildschirm angeschlossen sind. x Die Lautstärke wird für die Kopfhörer und den LED-Bildschirm separat angepasst. Verwenden eines HDMI-Kabels, HDMI/DVI-Kabels oder D-Sub-Kabels ✎Der Anschluss über ein HDMI-Kabel wird nicht von jedem PC unterstützt. HDMI-Kabel (nicht im Lieferumfang enthalten) HDMI/DVI-Kabel (nicht im Lieferumfang enthalten) Stereokabel Stereokabel D-Sub-Kabel Deutsch 18 Anschlüsse Anzeigemodi (D-Sub- und HDMI/DVI-Eingang) Optimale Auflösung: 1366 x 768 Pixel (nur Modell T19B300) Anzeigemodus Horizontalfrequenz (kHz) Vertikalfrequenz (Hz) Pixeltakt (MHz) Synchronisationspolarität Modus Auflösung (H/V) IBM 720 x 400 70Hz 31,469 70,087 28,322 -/+ VESA DMT 640 x 480 60Hz 31,469 59,940 25,175 -/- MAC 640 x 480 67Hz 35,000 66,667 30,240 -/- VESA DMT 640 x 480 72Hz 37,861 72,809 31,500 -/- VESA DMT 640 x 480 75Hz 37,500 75,000 31,500 -/- VESA DMT 800 x 600 60Hz 37,879 60,317 40,000 +/+ VESA DMT 800 x 600 72Hz 48,077 72,188 50,000 +/+ VESA DMT 800 x 600 75Hz 46,875 75,000 49,500 +/+ MAC 832 x 624 75Hz 49,726 74,551 57,284 -/- VESA DMT 1024 x 768 60Hz 48,363 60,004 65,000 -/- VESA DMT 1024 x 768 70Hz 56,476 70,069 75,000 -/- VESA DMT 1024 x 768 75Hz 60,023 75,029 78,750 +/+ VESA DMT 1280 x 720 60Hz 45,000 60,000 74,250 +/+ VESA DMT 1366 x 768 60Hz 47,712 59,790 85,500 +/+ Optimale Auflösung: 1920 x 1080 Pixel Anzeigemodus Horizontalfrequenz (kHz) Vertikalfrequenz (Hz) Pixeltakt (MHz) Synchronisationspolarität (H/V) Modus Auflösung IBM 720 x 400 70Hz 31,469 70,087 28,322 -/+ VESA DMT 640 x 480 60Hz 31,469 59,940 25,175 -/- MAC 640 x 480 67Hz 35,000 66,667 30,240 -/- VESA DMT 640 x 480 72Hz 37,861 72,809 31,500 -/- VESA DMT 640 x 480 75Hz 37,500 75,000 31,500 -/- VESA DMT 800 x 600 60Hz 37,879 60,317 40,000 +/+ VESA DMT 800 x 600 72Hz 48,077 72,188 50,000 +/+ VESA DMT 800 x 600 75Hz 46,875 75,000 49,500 +/+ MAC 832 x 624 75Hz 49,726 74,551 57,284 -/- VESA DMT 1024 x 768 60Hz 48,363 60,004 65,000 -/- VESA DMT 1024 x 768 70Hz 56,476 70,069 75,000 -/- VESA DMT 1024 x 768 75Hz 60,023 75,029 78,750 +/+ VESA DMT 1152 x 864 75Hz 67,500 75,000 108,000 +/+ MAC 1152 x 870 75Hz 68,681 75,062 100,000 -/- VESA DMT 1280 x 720 60Hz 45,000 60,000 74,250 +/+ VESA DMT 1280 x 800 60Hz 49,702 59,810 83,500 -/+ VESA DMT 1280 x 1024 60Hz 63,981 60,020 108,000 +/+ VESA DMT 1280 x 1024 75Hz 79,976 75,025 135,000 +/+ VESA DMT 1366 x 768 60Hz 47,712 59,790 85,500 +/+ VESA DMT 1440 x 900 60Hz 55,935 59,887 106,500 -/+ VESA DMT 1600 x 900 RB 60Hz 60,000 60,000 108,000 +/+ VESA DMT 1680 x 1050 60Hz 65,290 59,954 146,250 -/+ VESA DMT 1920 x 1080 60Hz 67,500 60,000 148,500 +/+ ✎HINWEIS x Der Interlace-Modus wird nicht unterstützt. x Das Gerät funktioniert womöglich nicht richtig, wenn ein nicht standardgemäßes Videoformat ausgewählt wird. x Separate- und Composite-Modus werden unterstützt. SOG (Sync On Green) wird nicht unterstützt.Deutsch 19 Anschlüsse Grundfunktionen Menünavigation Befolgen Sie vor der Verwendung des LED-Bildschirms die folgenden Schritte, um die Menünavigation kennenzulernen und zu erfahren, wie Sie verschiedene Funktionen auswählen und anpassen können. 1 ENTERE / Richtungstaste: Bewegung des Cursors und Auswahl von Elementen Bestätigung von Einstellungen 2 RETURN-Taste: Zurück zum vorherigen Menü 3 MENU-Taste: Anzeige des Haupt-On-Screen-Menüs 4 EXIT-Taste: Schließen des On-Screen-Menüs. Bedienung des OSD (On Screen Display) Je nach ausgewähltem Menü kann der Zugriff auf das OSD variieren. 1 MENU m Die Hauptmenüoptionen werden auf dem Bildschirm angezeigt: Bild, Ton, Sender, System, Unterstützung.. 2 ▲ / ▼ Wählen Sie mit den Tasten ▲ oder ▼ ein Symbol aus. 3 ENTERE Drücken Sie ENTERE, um das Untermenü zu öffnen. 4 ▲ / ▼ Wählen Sie mit den Tasten ▲ oder ▼ das gewünschte Untermenü aus. 5 ◄ / ► Passen Sie mit den Tasten ◄ oder ► den Wert eines Elements an. Je nach ausgewähltem Menü kann die Anpassung auf dem OSD variieren. 6 ENTERE Drücken Sie ENTERE, um die Konfiguration abzuschließen. 7 EXIT e Drücken Sie EXIT. Ändern der Eingangsquelle Quelle SOURCE s→ Quelle Wählen Sie zwischen dem LED-Bildschirm und einer externen Eingangsquelle, z. B. DVD-/Bluray-Player, Kabel- oder Satellitenempfänger. ■ TV / Ext. / PC / HDMI/DVI / AV / Component ✎Im Menü Quellewerden verbundene Eingangsquellen hervorgehoben. ✎TV, PC und Ext. sind immer aktiviert. Name bearb. SOURCEs→ TOOLST → Name bearb. → ENTERE Drücken Sie im Menü Quelle auf TOOLST, und geben Sie dann den gewünschten Namen für die externe Eingangsquelle ein. ■ VCR / DVD / Kabel-STB / Sat-STB / PVR-STB / AV-Receiver / Spiel / Camcorder / PC / DVI PC / DVI-Geräte / TV/IPTV / Blu-ray / HD DVD/DMA: Vergeben Sie an das an die Eingangsbuchsen angeschlossene Gerät einen Namen, um die Auswahl der Signalquelle zu vereinfachen. ✎Beim Anschluss eines PCs am HDMI IN (DVI)-Port über ein HDMI-Kabel sollten Sie für den LED-Bildschirm unter Name bearb. den PC-Modus festlegen. ✎Beim Anschluss eines PCs am HDMI IN (DVI)-Anschluss über ein HDMI/DVI-Kabel müssen Sie für den LED-Bildschirm unter Name bearb. den DVI PC-Modus festlegen. ✎Beim Anschluss eines AV-Geräts am HDMI IN (DVI)-Port über ein HDMI/DVI-Kabel sollten Sie für den LED-Bildschirm unter Name bearb. den DVI-Geräte-Modus festlegen. Information SOURCEs→ TOOLST→ Information → ENTERE Sie können detaillierte Informationen zum ausgewählten externen Gerät anzeigen. 2 4 3 1Deutsch 20 Grundfunktionen Verwenden der INFO -Taste (Programmführer) Auf der Anzeige werden sowohl der aktuelle Sender als auch der Status bestimmter Audio-/ Videoeinstellungen angezeigt. Der Programmführer zeigt die täglichen Programminformationen für alle Sender für die jeweilige Sendezeit an. x Blättern Sie nach l / r, um Informationen zum gewünschten Programm anzuzeigen, während der aktuelle Sender weiter läuft. (Abhängig von den Sendern) x Blättern Sie nach u / d, um Informationen zu anderen Sendern anzuzeigen. Drücken Sie ENTERE, um den aktuell ausgewählten Sender zu verschieben. • Das angezeigte Bild kann je nach Modell unterschiedlich sein. Keine detaillierten Informationen. Kein Titel 576i 4:3 SD Italienisch Stereo a Information 17:02, Di 19. Juli DTV Terr. Alle Coming Soon 5 Verwenden des Sendermenüs Drücken Sie auf CONTENT, um Startseite Inhalt zu öffnen, und wählen Sie dann das gewünschte Menü aus. Die einzelnen Seiten werden angezeigt. • Das angezeigte Bild kann je nach Modell unterschiedlich sein. Startseite Inhalt Senderliste TV-Programm Media Play Programm-Manager Quelle R Zurück TV-Programm CONTENT → Startseite Inhalt → TV-Programm → ENTERE Die Informationen des EPG (Elektronischer Programmführer) werden von den Sendern bereitgestellt. Mit dem Programmplan der Sender können Sie bestimmte Programme, die Sie sehen möchten, im Voraus auswählen. Der Sender wird dann zum festgelegten Zeitpunkt automatisch auf den gewählten Sender umgeschaltet. Abhängig vom Senderstatus können Programmeinträge leer oder veraltet sein. Verwenden der Kanalansicht x a Rot (Prog.-Mgr.): Zeigt den Progr.-Manager an. x b Grün (-24 Std.): Zeigt die Liste der gesendeten Programme der letzten 24 Stunden an. x { Gelb (+24 Std.): Zeigt die Liste der gesendeten Programme der nächsten 24 Stunden an. x } Blau (S.-Modus): Wählt die Art der Sender aus, die im Fenster Kanalansicht {Senderansicht} angezeigt werden. x ` (Information): Zeigt Einzelheiten zu dem ausgewählten Programm an. x k (Seite): Wechselt zur nächsten oder vorherigen Seite. x E (Ansehen / Programmierung) – Wählen Sie das aktuelle Programm aus, um es anzusehen. – Wählen Sie ein späteres Programm aus, um es zum Ansehen vorzumerken. Drücken Sie erneut auf ENTERE, und wählen Sie Programm. abbr. aus, um die Programmierung abzubrechen. Progr.-Manager CONTENT → Startseite Inhalt → Progr.-Manager → ENTERE Sie können den vorgemerkten Sender anzeigen, modifizieren oder löschen. Verwenden der Wiedergabe programmieren Sie können einen Sender festlegen, der zur festgelegten Zeit automatisch eingeschaltet wird. Sie müssen zunächst die Zeit einstellen, um diese Funktion nutzen zu können. 1. Drücken Sie auf ENTERE, um Progr.-Manager auszuwählen. 2. Drücken Sie auf TOOLSToder a , um das Programm manuell zur Programmierung hinzuzufügen. Der Bildschirm Wiedergabe programmieren wird angezeigt. 3. Drücken Sie auf u/d/l/r, um TV-Empf., Sender, Wiederh., Datum oder Startzeit festzulegen. • Das angezeigte Bild kann je nach Modell unterschiedlich sein. IL MEDICO E LO STREGONE DTV Terr. 6 R4 DTT 16:55 - 17:55 IL MEDICO E LO STREGONE - 2 TEMPO aProg.-Mgr. b-24 Std. { +24 Std. } S.-Modus ` Information k Seite E Ansehen Heute 17:00 17:30 18:00 18:30 TV-Programm 17:00, Di 19. Juli Kanalansicht - Alle Keine Information Keine Information Keine Information Keine Information IL MEDICO E LO STREGONE 1 1futech 2 24ore.tv 3 BBC World 4 Class News 5 Coming Soon 6 R4 DTT Keine Information TG 4 Keine Information 5 Coming SoonDeutsch 21 Grundfunktionen x TV-Empf.: Wählt die gewünschte Quelle für den TV-Empfänger aus. x Sender: Wählen Sie den gewünschten Sender aus. x Wiederholen: Wählen Sie nach Ihren Vorlieben Einmal, Manuell, Sa - So, Mo - Fr oder Täglich aus. Wenn Sie Manuell auswählen, können Sie einen beliebigen Tag einstellen. ✎ Die Kennzeichnung c markiert das ausgewählte Datum. x Datum: Sie können das gewünschte Datum festlegen. ✎ Diese Option ist verfügbar, wenn Sie unter Wiederh. die Option Einmal auswählen. x Startzeit: Sie können die gewünschte Startzeit festlegen. ✎ Auf der Seite Information können Sie reservierte Programme ändern oder löschen. x Programm. abbr.: Storniert ein reserviertes Programm. x Bearb.: Bearbeitet ein reserviertes Programm. x Zurück: Wechselt zurück zum vorherigen Bildschirm. Senderliste CONTENT → Senderliste → ENTERE Sie können alle gefundenen Sender anzeigen. • Das angezeigte Bild kann je nach Modell unterschiedlich sein. Senderliste Alle 1 1futech 2 24ore.tv 3 BBC World 4 Class News 5 Coming Soon 6 R4 DTT IL MEDICO E LO STREGONE a1 C2 a2 C4 T Extras L S.-Modus E Ansehen k Seite ✎Wenn Sie auf der Fernbedienung die Taste CH LIST drücken, wird sofort die Senderliste angezeigt. Verwenden der Bedientasten innerhalb der Senderliste ■ T (Extras): Drücken Sie auf TOOLS, um die folgenden Funktionen aufzurufen. x Programmansicht: Drücken Sie auf u/d, um das gewünschte Programm auszuwählen, und drücken Sie anschließend auf ENTERE. (Nur für DIGITALE Sender) x Favorit. bearb.: Richten Sie Ihre bevorzugten Sender als Favoriten ein. ✎ Wählen Sie Favorit. bearb. aus, und drücken Sie anschließend auf ENTERE. – Wenn der Sender bereits zu den Favoriten hinzugefügt wurde, wird Favorit. bearb. angezeigt. x Sperren/Freigabe: Wenn Sie einen Sender sperren, kann dieser nicht ausgewählt oder angezeigt werden. ✎ Diese Funktion ist nur verfügbar, wenn die Sendersperre aktiviert wurde. ✎ Der Bildschirm für die PIN-Eingabe wird angezeigt. Geben Sie die 4-stellige PIN ein (Standard ist „0000“). Ändern Sie die PIN über die Option PIN ändern. x Sendernamen bearbeiten (nur Analogsender): Weisen Sie einen eigenen Sendernamen zu. ✎ This function may not support depending on the region. x Kanalnr. bearbeiten : Bearbeiten Sie die Nummer durch Drücken der entsprechenden Zifferntaste. ✎ Diese Funktion wird nicht in allen Regionen unterstützt. x Entfernen: Sie können Kanäle entfernen, um nur die gewünschten Kanäle anzuzeigen. x Information: Zeigen Sie den Sendernamen, die Auflösung, den Bildmodus, die Sprache usw. an. (Einige Funktionen sind nur für DTV verfügbar.) x Sortieren: Sortieren Sie die Senderliste nach Sendername oder Sendernummer. (Nur für DIGITALE Sender) x Antenne wechseln: Wechselt zwischen Terrestrisch und Kabel.. x Bearb.-Modus: Sie können die gewünschten Sender auswählen und bearbeiten. ■ l r (S.-Modus): Wechseln Sie zu den Sendern, die in der Senderliste angezeigt werden. ✎ Diese Option variiert von Land zu Land. ■ E (Ansehen / Information) Zeigt den ausgewählten Sender an. /Zeigt Einzelheiten zu dem ausgewählten Programm an. ■ k (Seite): Wechselt zur nächsten oder vorherigen Seite. Verwendung der Wiedergabe programmieren in der Senderliste (abhängig von den Sendern) Wenn Sie in der Senderliste die Programmansicht auswählen, ist davon nur das Programm in der Programmansicht betroffen. 1. Drücken Sie auf CH LIST, und wählen Sie den gewünschten digitalen Sender aus. 2. Drücken Sie auf TOOLST, und wählen Sie Programmansicht aus. 3. Drücken Sie auf u/d, um das gewünschte Programm auszuwählen, und drücken Sie anschließend auf E(Information). 4. Wählen Sie Programmansicht aus, und drücken Sie abschließend auf ENTERE. ✎Wenn Sie die Wiedergabe programmieren abbrechen möchten, befolgen Sie die Schritte 1 bis 3.Wählen Sie Programm. abbr. aus.Deutsch 22 Grundfunktionen Sendermenü ¦ Neueinstellen von Sendern MENUm→ Sender → ENTERE Bevor Sie die verfügbaren Sender im Gerät speichern können, TV-Empf. (Terrestrisch / Kabel)t müssen Sie den Typ der Signalquelle angeben, die mit dem LEDBildschirm verbunden ist. Land (abhängig vom Land) Der Bildschirm für die PIN-Eingabe wird angezeigt. Geben Sie Ihre 4-stellige PIN ein. ✎Wählen Sie Ihr Land aus, damit der LED-Bildschirm die Sender automatisch richtig einstellen kann. ■ Digitaler Sender: Ändert das Land für digitale Sender. ■ Analogsender: Ändert das Land für Analogsender. Autom. Sendersuchlauf (abhängig vom Land) ✎Die automatisch zugewiesenen Programmnummern stimmen möglicherweise nicht mit den tatsächlichen oder gewünschten Programmnummern überein. Wenn ein Sender über die Funktion Sendersperre gesperrt ist, wird der Bildschirm für die PINEingabe angezeigt. ■ Autom. Sendersuchlauf – Terrestrisch/Kabel: Sendertyp zum Speichern auswählen. Digital und Analog/Digital/Analog: Sendertyp zum Speichern auswählen. ✎ Bei Auswahl von Kabel → Digital und Analog oder Digital: Geben Sie einen Wert für die Suche nach Kabelsendern ein. x Suchmodus(Voll / Netzwerk/ Schnell ): zur Auswahl einer Einstellung für den SuchmodusVoll/ Netzwerk / Schnell. x Netzwerk (Auto / Manuell): Wählt für die Netzwerkkennung zwischen den Einstellungsmodi Auto und Manuell aus. x Netzwerkkennung: Wenn für Netzwerk die Option Manuell ausgewählt wurde, können Sie die Netzwerkkennung mit den Nummerntasten eingeben. x Frequenz: Zeigt die Frequenz des Senders an. (je nach Land unterschiedlich) x Modulation: Zeigt die verfügbaren Modulationswerte an. x Symbolrate: Zeigt die verfügbaren Symbolraten an. ■ Suchoptionen für Kabel (abhängig vom Land) Legt zusätzliche Suchoptionen wie Frequenz und Symbolrate für die Suche nach Kabelnetzwerken fest. – Startfrequenz / Stoppfrequenz: Legt die Start- und Endfrequenz fest (je nach Land unterschiedlich). – Symbolrate: Zeigt die verfügbaren Symbolraten an. – Modulation: Zeigt die verfügbaren Modulationswerte an. Man. Sendereinstellung Scannt manuell nach Sendern und speichert sie im LED-Bildschirm. ✎Wenn ein Sender über die Funktion Sendersperre gesperrt ist, wird der Bildschirm für die PIN-Eingabe angezeigt. ■ Einstellung von Digitalsendern: Scannt nach digitalen Sendern. 1. Drücken Sie auf ENTERE, um die Option Neu auszuwählen. ✎ Bei Auswahl von TV-Empf. → Terrestrisch: Sender, Frequenz, Bandbreite ✎ Bei Auswahl von TV-Empf. → Kabel: Frequenz, Modulation, Symbolrate 2. Drücken Sie auf d, um Suchen auszuwählen. Nach Abschluss des Scans wird die Senderliste aktualisiert. ■ Einstellung von Analogsendern: Scannt nach Analogsendern. 1. Drücken Sie auf ENTERE, um die Option Neu auszuwählen. 2. Konfigurieren Sie Programm, Fernsehnorm, Tonsystem, Sender und Suchen. 3. Drücken Sie auf d, um Speichern auszuwählen. Nach Abschluss des Scans wird die Senderliste aktualisiert. Senderliste übertrag. Der Bildschirm für die PIN-Eingabe wird angezeigt. Geben Sie Ihre 4-stellige PIN ein. Die Sendertabelle wird importiert oder exportiert. Für diese Funktion ist ein USB-Stick erforderlich. ■ Von USB importieren: Importiert die Senderliste über USB. ■ Auf USB exportieren: Exportiert die Senderliste auf USB. Diese Funktion ist nur bei angeschlossenem USB-Stick verfügbar. ✎USB-Format muss FAT32 sein. Feinabstimmung (nur Analogsender) Wenn Sie klaren Empfang haben, müssen Sie die Sender nicht feinabstimmen, da dies während des Suchens und Speicherns automatisch geschieht. Wenn das Signal schwach oder verzerrt ist, stimmen Sie den Sender manuell ab. Blättern Sie nach links oder rechts, bis das Bild klar ist. ✎Die Einstellungen werden auf den aktuell angezeigten Sender angewendet. ✎Wenn Sie einen gespeicherten Sender feinabstimmen, wird dieser in der Senderliste rechts der Sendernummer mit einem Sternchen „*“ gekennzeichnet. ✎Wählen Sie Zurücksetzen aus, um die Feinabstimmung zurückzusetzen.Deutsch 23 Grundfunktionen Bildmenü ¦ Ändern des voreingestellten Bildmodus MENUm→ Bild → Bildmodus → ENTERE Wählen Sie den gewünschten Bildtyp aus. Bildmodus t ✎Wenn Sie einen PC anschließen, sind nur die Bildmodi Standard und Unterhalt. verfügbar. ■ Dynamisch: Für helle Räume geeignet. ■ Standard: Für normale Umgebungen geeignet. ■ Film: Für das Ansehen von Filmen in dunklen Räumen geeignet. ■ Unterhalt.: Für das Ansehen von Filmen und für Spiele geeignet. ✎ Dieser Modus ist nur verfügbar, wenn der Bildschirm an einen PC angeschlossen ist. ¦ Anpassen der Bildeinstellungen MENUm→ Bild → ENTERE Samsung MagicAngle Stellen Sie den Betrachtungswinkel ein, um die Bildqualität optimal an Ihre Blickrichtung anzupassen. ■ Samsung MagicAngle: Wenn Sie den Bildschirm aus einem Winkel von oben oder unten aus betrachten, können Sie durch Einstellen des korrekten Modus für jede Position eine ähnliche Bildqualität erzielen, als würden Sie direkt von vorn auf den Bildschirm blicken. x Aus: Wählen Sie diese Option aus, wenn Sie gerade auf den Bildschirm blicken. x Zurücklehn-Modus: Wählen Sie diese Option aus, wenn Sie von unten auf den Bildschirm blicken. x Stehmodus: Wählen Sie diese Option aus, wenn Sie von oben auf den Bildschirm blicken. ■ Modus: Passt den Blickwinkel des Bildschirms an. ✎Wenn für Samsung MagicAngle die Option Zurücklehn-Modus oder Stehmodus ausgewählt wurde, ist Gamma nicht verfügbar. Hintergrundbel./Kontrast/Helligkeit/Schärfe/ Farbe/Farbton (G/R) Ihr Fernseher verfügt über mehrere Einstellungsoptionen zur Steuerung der Bildqualität. ✎HINWEIS x In den Analogmodi TV, PC, AV des PAL-Systems ist die Funktion Farbton (G/R) nicht verfügbar. x Bei Anschluss eines PCs können Sie nur Änderungen an Hintergrundbel., Kontrast, Helligkeit und Schärfe vornehmen. x Die Einstellungen können für jedes an den LED-Bildschirm angeschlossene externe Gerät angepasst und gespeichert werden. x Wenn Sie die Bildhelligkeit verringern, senkt dies den Stromverbrauch. Bildschirmanpassung ■ Bildformat: Ihr Kabel- oder Satellitenempfänger bietet möglicherweise eigene Bildschirmformate an. Wir empfehlen jedoch, in den meisten Fällen den 16:9-Modus zu verwenden. Autom. Breit: Passt das Bildformat automatisch an das 16:9-Seitenverhältnis an. 16:9: Stellt das Bildformat auf 16:9-Breitbildmodus ein. Breitenzoom: Vergrößert das Bildformat über 4:3 hinaus. ✎ Passt die Position mit den Tasten u/d an. Zoom: Passt Bilder im 16:9-Format an die Höhe des Bildschirms an. ✎ Passt Zoom oder Position mit den Tasten u/d an. 4:3: Stellt das Bildformat auf Standardmodus (4:3) ein. ✎ Stellen Sie das Gerät nicht längere Zeit auf das 4:3-Format ein. Die links, rechts und in der Mitte des Bildschirms vorhandenen Randstreifen könnten Nachbilder (Einbrennen des Bildschirms) verursachen. Dies ist nicht durch die Garantie abgedeckt. Bildanpassung: Zeigt bei HDMI (720p/1080i/1080p)- oder Component (720p/1080i/1080p)-Eingangssignalen das ganze Bild nicht abgeschnitten an. ✎ Passt die Position mit den Tasten u/d/l/r an. ✎HINWEIS x Die Optionen für das Bildformat können sich je nach Eingangsquelle unterscheiden. x Die verfügbaren Elemente sind abhängig vom ausgewählten Modus. x Wenn Sie den Bildschirm an einen PC anschließen, sind nur die Modi 16:9 und 4:3 anpassbar. x Die Einstellungen können für jedes an den LED-Bildschirm angeschlossene externe Gerät angepasst und gespeichert werden. x Wenn Sie mit einem HDMI 720p-Eingangssignal die Funktion Bildanpassung verwenden, wird wie bei der Funktion Overscan jeweils 1 Zeile oben, unten, links und rechts abgeschnitten. ■ Zoom / Position:Sie können das Bildformat und die Bildposition mit den Tasten u / d / l / r anpassen. ✎ Dies ist nur möglich, wenn das Bildformat auf Zoom und Breitenzoom eingestellt ist. ✎ Im Modus Breitenzoom können Sie nur die Position anpassen. ✎ Zurücksetzen: setzt Zoom und Position auf die Standardeinstellungen zurück. ■ 4:3-Bildschirmgr. (16:9/Breitenzoom/Zoom/4:3): Diese Funktion ist nur dann verfügbar, wenn für das Bildformat Autom. Breit {Autom. Breite} eingestellt ist. Sie können für das Bildformat 4:3 WSS (Wide Screen Service) oder die Originalgröße auswählen. Jedes europäische Land hat ein anderes Bildformat. ✎ Nicht verfügbar in den Modi HDMI, Component und HDMI/ DVI.Deutsch 24 Grundfunktionen ■ PC-Bildschirmanpassung ✎ Nur im PC-Modus verfügbar. x Grob/Fein: Entfernt oder reduziert Bildrauschen. Wenn das Rauschen nicht allein durch Feinabstimmung entfernt werden kann, passen Sie die Frequenz bestmöglich an (Grob), und führen Sie dann die Feinabstimmung erneut durch. Nachdem das Rauschen reduziert ist, justieren Sie das Bild erneut, sodass es an der Mitte des Bildschirms ausgerichtet ist. x Position: Passt die PC-Bildschirmposition mit den Richtungstasten an (u/d/l/r). x Bild zurücksetzen: Setzt das Bild auf die Standardeinstellungen zurück. Passt die Frequenzwerte/Position an und nimmt automatisch die Autom. Einstellungt Feinabstimmung vor. ✎Diese Funktion ist nur im PC-Modus verfügbar. Verwenden des Fernsehers als PC-Bildschirm Einrichten Ihrer PC-Software (basierend auf Windows XP) Abhängig von der Windows-Version und der Grafikkarte kann der tatsächliche Bildschirm auf Ihrem PC anders aussehen; die grundlegenden Informationen zur Einrichtung sind jedoch beinahe immer identisch. (Falls dies nicht der Fall ist, wenden Sie sich an Ihren Computerhersteller oder Ihren Samsung-Händler.) 1. Klicken Sie im Windows-Startmenü auf „Systemsteuerung“. 2. Klicken Sie im Fenster „Systemsteuerung“ auf „Darstellung und Designs“. Es wird ein Dialogfeld angezeigt. 3. Klicken Sie auf „Anzeige“. Ein Dialogfeld wird angezeigt. 4. Öffnen Sie die Registerkarte „Einstellungen“. x Die korrekte Seiteneinstellung (Auflösung) [Optimal: 1920 x 1080 Pixel]. (T19B300: 1366 x 768 Pixel) x Wenn im Dialogfeld für die Anzeigeeinstellungen eine Option für die Vertikalfrequenz vorhanden ist, beträgt der korrekte Wert „60“ bzw. „60 Hz“. Klicken Sie anderenfalls einfach auf „OK“, um das Dialogfeld zu schließen. Die korrekte Körperhaltung beim Verwenden des Geräts Achten Sie beim Verwenden des Geräts auf korrekte Körperhaltung. x Sitzen Sie aufrecht, mit geradem Rücken. x Halten Sie einen Abstand von 45–50 cm zwischen dem Bildschirm und Ihren Augen ein. Schauen Sie geradeaus und von oben nach unten auf den Bildschirm. x Stellen Sie den Winkel des Geräts so ein, dass kein Licht auf den Bildschirm fällt. x Halten Sie Ihre Arme am Ellbogen im rechten Winkel, sodass die Unterarme eine gerade Linie mit den Handrücken bilden. x Halten Sie Ihren Ellenbogen im rechten Winkel. x Halten Sie Ihre Hacken flach auf dem Boden und die Knie in einem Winkel von 90 Grad oder mehr. Halten Sie Ihren Arm so, dass er unterhalb Ihres Herzens liegt. ¦ Ändern der Bildoptionen Erweiterte Einstellungen MENUm→ Bild → Erweiterte Einstellungen → ENTERE (Erweiterte Einstellungen sind im Standard-/Film-Modus verfügbar.) Im Vergleich zu den Vorgängermodellen verfügt der neue SamsungLED-Bildschirm über ein präziseres Bild. ✎Bei Anschluss eines PCs können Sie nur Änderungen am Weißabgleich vornehmen. Erweiterte Einstellungen Nur RGB-Modus Aus Farbraum Nativ Weißabgleich Gamma 0 Optimalkontrast Hoch Schwarzton Aus Hautton 0 ■ Optimalkontrast (Aus/Gering/Mittel/Hoch): Stellt den Bildschirmkontrast ein. ■ Schwarzton (Aus/Dunkel/Dunkler/Max. dunkel): Wählt den Schwarzwert für die Anpassung der Bildschirmtiefe aus. ■ Hautton: Verstärkt den rosa „Hautton“. ■ Nur RGB-Modus (Aus/Rot/Grün/Blau): Zeigt die Farben Rot, Grün und Blau an, um eine Feinabstimmung von Farbton und Sättigung vorzunehmen. ■ Farbraum (Auto/Nativ): Passt die verfügbare Farbpalette für die Bilddarstellung an. ■ Weißabgleich: Passt die Farbtemperatur an, um eine natürlicheres Bild zu erhalten. R-Offset/G-Offset/B-Offset: Passt die Dunkelheit der einzelnen Farben (Rot, Grün, Blau) an. R-Gain/G-Gain/B-Gain: Passt die Helligkeit der einzelnen Farben (Rot, Grün, Blau) an. Zurücksetzen: Setzt den Weißabgleich auf die Standardeinstellungen zurück. ■ Gamma: Passt die Intensität der Primärfarbe an. ■ Bewegungsbel. (Aus/Ein): Reduziert den Stromverbrauch durch Steuerung der Helligkeit.Deutsch 25 Grundfunktionen Bildoptionen MENUm→ Bild → Bildoptionen → ENTERE ✎Bei Anschluss eines PCs können Sie nur Änderungen am Farbton vornehmen. Bildoptionen Farbton Standard Digit. Rauschfilter Auto MPEG-Rauschfilter Auto HDMI-Schwarzp. Gering Filmmodus Aus ■ Farbton (Kalt/Standard/Warm1/Warm2) ✎ Warm1 oder Warm2 wird deaktiviert, wenn der Bildmodus Dynamisch ist. ✎ Die Einstellungen können für jedes an den LED-Bildschirm angeschlossene externe Gerät angepasst und gespeichert werden. ■ Digit. Rauschfilter (Aus/Gering/Mittel/Hoch/Auto/ Autovisualisierung): Wenn das vom LED-Bildschirm empfangene Signal schwach ist, können Sie die Funktion Digit. Rauschfilter aktivieren, um statische und Geisterbilder, die auf dem Bildschirm auftreten, abzuschwächen. ✎ Wenn das Signal schwach ist, probieren Sie solange andere Optionen aus, bis das bestmögliche Bild angezeigt wird. Autovisualisierung: Zeigt beim Wechseln der Analogsender die Signalstärke an. ✎ Nur für Analogsender verfügbar. ✎ Wenn der Balken grün ist, ist das Signal optimal. ■ MPEG-Rauschfilter (Aus/Gering/Mittel/Hoch/Auto): Verringert MPEG-Rauschen, um eine bessere Bildqualität zu erzielen. ■ HDMI-Schwarzp. (Gering/Normal): Wählt den Schwarzwert des Bildschirms für die Anpassung der Bildschirmtiefe aus. ✎ Nur im HDMI-Modus (RGB-Signale) verfügbar. ■ Filmmodus (Aus/Auto1/Auto2): Stellt den LED-Bildschirm so ein, dass er Videosignale von allen Quellen automatisch erkennt und verarbeitet und das Bild in optimaler Qualität anzeigt. ✎ Verfügbar im TV-Modus, HDMI (1080i). ✎ Wenn das Bild nicht natürlich erscheint, ändern Sie die Option im Filmmodus auf Aus/Auto1/Auto2. Bild zurücksetzen (Ja/Nein) Setzt den aktuellen Bildmodus auf die Standardeinstellungen zurück. Tonmenü ¦ Ändern des voreingestellten Tonmodus MENUm→ Ton → Tonmodus → ENTERE Tonmodus t ■ Standard: Wählt den normalen Tonmodus aus. ■ Musik: Gibt Musik den Vorrang vor Stimmen. ■ Film: Bietet den besten Ton für Filme. ■ Klare Stimme: Gibt Stimmen den Vorrang vor anderen Tönen. ■ Verstärken: Erhöht die Intensität von hochfrequenten Tönen, um ein besseres Hörerlebnis für Hörgeschädigte zu ermöglichen. ✎Wenn Lautsprecher auswählen auf Ext. Lautsprecher eingestellt ist, ist Tonmodus deaktiviert. ¦ Anpassen der Toneinstellungen Soundeffekt MENUm→ Ton → Soundeffekt → ENTERE (nur im Standardtonmodus)  Diese Funktion ermöglicht dur ■ SRS TruSurround HD(Aus / Ein) ch HRTF-Technologie (Head t Related Transfer Function) virtuellen 5.1 Kanalton bei einem einzigen Lautsprecherpaar. ■ SRS TruDialog (Aus / Ein)  Mit dieser Funktion können Sie die Lautstärke einer Stimme gegenüber der Hintergrundmusik oder den Toneffekten erhöhen, so dass Dialoge besser zu verstehen sind. ■ Equalizer  Passt den Tonmodus an. – Balance L/R: Stellt die Balance zwischen dem rechten und linken Lautsprecher ein. 100 Hz/300 Hz/1 kHz/3 kHz/10 kHz (Bandbreiteneinstellung): Stellt den Pegel bestimmter Bandbreitenfrequenzen ein. – Zurücksetzen: setzt den Equalizer auf die Standardeinstellungen zurück.Deutsch 26 Grundfunktionen ¦ Tonsysteme usw. MENUm→ Ton → ENTERE Audiowiedergabeoptionen ■ Wiedergabesprache  (nur digitale Sender)  Ändern Sie den Standardwert für Wiedergabesprachen. ✎ Die verfügbaren Sprachen sind abhängig von der Übertragung. ■ Audioformat  (nur digitale Sender)  Wählen Sie das Audioformat aus. ■ Audio f. Sehgesch.  (nicht überall verfügbar) (nur digitale Sender)  Diese Funktion steuert den Audiostream für die AD (Audiobeschreibung), die zusammen mit der Haupttonspur vom Sender übertragen wird. ✎ Audio f. Sehgesch. (Aus/Ein): Schaltet die Funktion „Audio f. Sehgesch.“ ein oder aus. ✎ Lautstärke: Stellt die Lautstärke für Audio für Sehgeschädigte ein. Zusätzliche Einst. (nur digitale Sender) ■ DTV-Audio-Lautst. (MPEG/HE-AAC): Mit dieser Funktion können Sie den Lautstärkeunterschied eines Sprachsignals (eines der Signale, die während einer digitalen Fernsehausstrahlung empfangen werden) ausgleichen. ✎ Je nach Art des Sendesignals können Sie den Wert für MPEG/HE-AAC zwischen -10 dB und 0 dB einstellen. ✎ Passen Sie daher den Wert im Bereich 0 bis -10 an, um die Lautstärke zu erhöhen oder zu senken. ■ SPDIF-Ausgabe: SPDIF (Sony Philips Digital InterFace) wird verwendet, um digitalen Ton wiederzugeben und so Störungen der Lautsprecher und anderer digitaler Geräte wie DVD-Playern zu reduzieren. – Audioformat: Sie können das digitale Audioausgabeformat (SPDIF) auswählen. ✎ Das verfügbare digitale Audioausgabeformat (SPDIF) ist abhängig von der Eingangsquelle. – Audioverzögerung: Korrigieren Sie Audio-VideoSynchronisierungsprobleme bei der Wiedergabe von Fernseh/Video oder von digitalem Audio über ein externes Gerät wie einen AV-Receiver (0 ms-250 ms). ✎ Diese Funktion ist für die TB300-Serie nicht verfügbar. ■ Dolby Digital-Komp. (Line/HF): Diese Funktion minimiert die Signalabweichung zwischen einem Dolby Digital-Signal und einem Sprachsignal (z. B. MPEG-Audio, HE-AAC, ATV-Ton). ✎ Wählen Sie Line aus, um dynamischen Ton zu erhalten, und wählen Sie HF aus, um abends den Unterschied zwischen lauten und leisen Tönen zu reduzieren. Line: Legen Sie für Signale über oder unter -31 dB (Referenz) einen Ausgabewert von -20 dB oder -31 dB fest. HF: Legen Sie für Signale über oder unter -20 dB (Referenz) einen Ausgabewert von -10 dB oder -20 dB fest. Lautsprechereinstellungen ■ Lautsprecher auswählen (Externe Lautsprecher/ TV-Lautsprecher): Aufgrund der unterschiedlichen Dekodiergeschwindigkeit zwischen dem Hauptlautsprecher und dem Audioempfänger kann es zu einem Echoeffekt kommen. Stellen Sie in diesem Fall den Fernseher auf Ext. Lautsprecher um. ✎ Wenn Lautsprecher auswählen auf Ext. Lautsprecher eingestellt ist, sind die Lautstärke- und MUTE-Tasten ohne Funktion, und die Toneinstellungsmöglichkeiten sind begrenzt. ✎ Wenn Lautsprecher auswählen auf Ext. Lautsprecher eingestellt ist. x TV-Lautsprecher: Aus, Ext. Lautsprecher: Ein ✎ Wenn Lautsprecher auswählen auf TV-Lautsprecher eingestellt ist. x TV-Lautsprecher: Ein, Ext. Lautsprecher: Ein ✎ Wenn kein Videosignal vorhanden ist, sind beide Lautsprecher ausgeschaltet. ✎ Diese Funktion ist für die TB300-Serie nicht verfügbar. ■ Autom. Lautst. (Aus/Normal/Nacht): Wählen Sie Normal aus, um den Lautstärkepegel für alle Sender auszugleichen. Nacht: Dieser Modus bietet im Vergleich zum Normal-Modus ein verbessertes Tonerlebnis, da er beinahe keine lauten Geräusche verursacht. Er ist besonders abends und nachts geeignet. Ton zurücks. (Ja / Nein) Setzen Sie alle Toneinstellungen auf die Werkseinstellungen zurück. ¦ Auswählen des Tonmodus t Wenn Sie Dual fg aktivieren, wird der aktuell ausgewählte Tonmodus auf dem Bildschirm angezeigt. Audiosystem Dual f-g Standard A2- Stereo Mono Mono Automatischer Stereo Stereo ↔ Mono Wechsel Dual Dual f ↔ Dual g Dual f NICAM Stereo Mono Mono Automatischer Stereo Mono ↔ Stereo Wechsel Dual Mono ↔ Dual f  Dual g  Dual f ✎Wenn das Stereo-Signal schwach ist und automatisch wechselt, findet ein Wechsel auf Mono statt. ✎Nur bei einem Stereo-Tonsignal aktiviert. ✎Nur verfügbar, wenn die Eingangsquelle auf TV eingestellt ist.Deutsch 27 Grundfunktionen Systemmenü ¦ Festlegen der Zeit MENUm→ System → ENTERE Zeit ■ Uhr: Das Einstellen der Uhr ist für verschiedene Timerfunktionen des LED-Bildschirms erforderlich. ✎ Die aktuelle Zeit wird angezeigt, wenn Sie auf INFO drücken. ✎ Wenn Sie das Netzkabel abziehen, müssen Sie die Uhr neu einstellen. Uhrmodus (Auto/Manuell) x Auto: Stellen Sie die aktuelle Uhrzeit automatisch unter Verwendung der Uhrzeit eines digitalen Senders ein. ✎ Die Antenne muss angeschlossen sein, damit die Zeit automatisch eingestellt werden kann. x Manuell: Stellen Sie die Uhrzeit manuell ein. ✎ Je nach Sender und Signal ist die automatisch eingestellte Uhrzeit möglicherweise nicht korrekt. Stellen Sie in diesem Fall die Uhrzeit manuell ein. Zeit einstellen: Stellen Sie Tag, Monat, Jahr, Stunde und Minute manuell ein. ✎ Nur verfügbar, wenn Uhrmodus auf Manuell eingestellt ist. ✎ Sie können Tag, Monat, Jahr, Stunde und Minute durch Drücken der Zifferntasten auf der Fernbedienung direkt einstellen. Zeitzone (Auto/Manuell) (abhängig vom Land): Wählen Sie Ihre Zeitzone aus. ✎ Diese Funktion ist nur verfügbar, wenn der Uhrmodus auf Auto eingestellt ist. – GMT(GMT-3:00-GMT-1:00/GMT/GMT+1:00- GMT+12:00): Wählt die Zeitzone aus. ✎ Diese Funktion ist nur verfügbar, wenn Zeitzone auf Manuell eingestellt ist. – Sommerzeit (Aus/Ein): Schaltet die SommerzeitFunktion ein oder aus. ✎ Diese Funktion ist nur verfügbar, wenn Zeitzone auf Manuell eingestellt ist. Verwenden des Sleep-Timers ■ Sleep-Timer t: Schaltet den LED-Bildschirm nach einer voreingestellten Zeit automatisch aus (30, 60, 90, 120, 150 oder 180 Minuten). ✎ Wählen Sie zum Ausschalten von Sleep-Timer Aus aus. Einstellen von automatischem Ein-/Ausschalten ■ Automatisch Einschalten Autom. Ein 1 / Autom. Ein 2 / Autom. Ein 3: Es können drei unterschiedliche Timer zum automatischen Einschalten eingestellt werden. Sie müssen zuerst die Uhr einstellen. Autom. Ein 1 Einstell. Aus Zeit 0:00 Lautstärke 20 Quelle TV TV-Empf. DTV Sender 1 So Mo Di Mi Do Fr Sa R Zurück Schließen Einstell.: Wählen Sie zwischen Aus, Einmal, Täglich, Mo - Fr, Mo - Sa, Sa - So oder Manuell aus. Wenn Sie Manuell auswählen, können Sie einen beliebigen Tag zur Aktivierung des Timers einstellen. ✎ Die Kennzeichnung c markiert das ausgewählte Datum. Zeit: Zur Einstellung von Stunde und Minute. Lautstärke: Zur Einstellung der gewünschten Lautstärke. Quelle: Wählen Sie die Eingangsquelle aus, die beim automatischen Einschalten des LED-Bildschirms verwendet werden soll. (USB kann nur ausgewählt werden, wenn ein USB-Gerät an den LED-Bildschirm angeschlossen ist.) TV-Empf. (wenn die Quelle auf TV eingestellt ist): Wählen Sie ATV oder DTV aus. Sender (wenn die Quelle auf TV eingestellt ist): Wählen Sie den gewünschten Sender aus. Musik/Foto (wenn die Quelle auf USB eingestellt ist): Wählen Sie einen Ordner auf dem USB-Gerät mit Musik- oder Fotodateien aus, die automatisch wiedergegeben werden sollen, wenn der LEDBildschirm eingeschaltet wird. ✎ HINWEIS x Wenn sich auf dem USB-Gerät keine Musikdatei befindet oder Sie keinen Ordner mit einer Musikdatei auswählen, funktioniert die Timer-Funktion nicht richtig. x Wenn sich auf dem USB-Gerät nur eine einzige Fotodatei befindet, wird keine Diashow wiedergegeben. x Wenn ein Ordnername zu lang ist, kann der Ordner nicht ausgewählt werden. x Jedem verwendeten USB-Gerät wird ein eigener Ordner zugewiesen. Wenn Sie mehr als ein USB-Gerät vom gleichen Typ verwenden, müssen die den einzelnen Geräten zugewiesenen Ordner unterschiedliche Namen haben. x Wir empfehlen Ihnen, bei Verwendung von Autom. Ein einen USB-Stick und ein Multi-Card-Lesegerät zu verwenden. x Die Autom. Ein-Funktion funktioniert möglicherweise nicht mit USB-Geräten mit integriertem Akku, MP3-Playern oder PMPs bestimmter Hersteller, weil das Gerät zu lange braucht, um diese Geräte zu erkennen.Deutsch 28 Grundfunktionen ■ Autom. Aus Autom. Aus 1 / Autom. Aus 2 / Autom. Aus 3: Es können drei unterschiedliche Timer zum automatischen Ausschalten eingestellt werden. Sie müssen zuerst die Uhr einstellen. Autom. Aus 1 Einstell. Aus Zeit 00:00 So Mo Di Mi Do Fr Sa R Zurück Schließen Einstell.: Wählen Sie zwischen Aus, Einmal, Täglich, Mo - Fr, Mo - Sa, Sa - So oder Manuell aus. Wenn Sie Manuell auswählen, können Sie einen beliebigen Tag zur Aktivierung des Timers einstellen. ✎ Die Kennzeichnung c markiert das ausgewählte Datum. Zeit: Zur Einstellung von Stunde und Minute. ¦ Sperrprogramme MENUm→ System → Sicherheit → ENTERE Sicherheit ✎Bevor der Einrichtungsbildschirm angezeigt wird, müssen Sie die PIN eingeben. ✎Geben Sie die 4-stellige PIN ein (Standard ist „0000“). Ändern Sie die PIN über die Option PIN ändern. ■ Sendersperre (Aus/Ein): Sperrt Sender im Sender-Manager, damit nicht autorisierte Anwender, z. B. Kinder, keine ungeeigneten Programme ansehen können. ✎ Nur verfügbar, wenn die Eingangsquelle auf TV eingestellt ist. ■ Prog.-Sperre/Bew. (abhängig vom Land): Verhindert durch Eingabe einer benutzerdefinierten 4-stelligen PIN, dass unautorisierte Anwender, z. B. Kinder, ungeeignete Programme ansehen können. Wenn der Sender gesperrt ist, wird das Symbol „\“ angezeigt. ✎ Die Elemente für Prog.-Sperre/Bew. sind länderspezifisch. ■ PIN ändern: Der Bildschirm PIN ändern wird angezeigt. Geben Sie eine beliebige 4-stellige PIN ein. Ändern Sie die für die Einrichtung des LED-Bildschirms erforderliche PIN. Geben Sie die 4-stellige PIN erneut ein. Wenn der Bestätigungsbildschirm angezeigt wird, wurde Ihre PIN gespeichert. ¦ Ökologische Lösungen MENUm→ System → Öko-Lösung → ENTERE Öko-Lösung ■ tEnergiesparmod. (Aus/Gering/Mittel/Hoch/Bild aus) : Mit dieser Funktion stellen Sie die Helligkeit des LED-Bildschirms ein, um Energie zu sparen. Wenn Sie Bild aus auswählen, wird das Bild ausgeschaltet, aber der Ton läuft weiter. Drücken Sie eine beliebige Taste außer den Lautstärketasten, um den Bildschirm wieder einzuschalten. ■ Kein Sig. Standby (Aus/15 Min./30 Min./60 Min.): Um unnötigen Energieverbrauch zu vermeiden, können Sie festlegen, wie lange der LED-Bildschirm eingeschaltet bleibt, wenn er kein Signal empfängt. ✎ Diese Funktion ist deaktiviert, wenn sich der PC im Energiesparmodus befindet. ■ Auto Power Off (Aus/Ein): Spart Energie, indem der LEDBildschirm automatisch ausgeschaltet wird, wenn 4 Stunden lang keine Benutzereingabe gemacht wird. ¦ Weitere Funktionen MENUm→ System → ENTERE Sprache ■ Menüsprache: Hiermit können Sie die Menüsprache festlegen. ■ Teletextsprache: Hiermit können Sie die gewünschte Sprache für den Teletext festlegen. ✎ Wenn die ausgewählte Sprache nicht übertragen werden kann, ist die Standardsprache Englisch. ■ Bevorzugte Sprache (Primäre Audiosprache / Sekundäre Audiosprache/Primäre Untertitelspr./ Sekundäre Untertitelspr.): Wählen Sie eine Sprache als Standardsprache aus, wenn ein Sender ausgewählt ist. Untertitel Stellen Sie in diesem Menü den UntertitelModus ein. ■ Untertitel (Aus/Ein): Schaltet den Untertitel ein oder aus. ■ Untertitelmodus (Normal/Hörgeschädigt): Stellt den Untertitelmodus ein. ■ Untertitelsprache: Stellt die Untertitelsprache ein. ✎ Wenn das Programm, das Sie ansehen, die Funktion Hörgeschädigt nicht unterstützt, wird automatisch die Vorzugssprache aktiviert, auch wenn der Modus Hörgeschädigt ausgewählt ist. ✎ Wenn die ausgewählte Sprache nicht übertragen werden kann, ist die Standardsprache Englisch.Deutsch 29 Grundfunktionen Digitaltext (Deaktivieren/Aktivieren) (nur Großbritannien) Wenn mit dem Programm auch Digitaltext übertragen wird, wird diese Funktion aktiviert. Autom. Schutzzeit ■ Aus/2 Std./4 Std./8 Std./10 Std.: Wenn eine vom Benutzer festgelegte Zeitdauer lang ein Standbild angezeigt wird, wird der Bildschirmschoner aktiviert, um ein Einbrennen des Bildes zu vermeiden. Allgemein ■ Max. Energiesparen (Aus / Ein): Schaltet den PC-Monitor aus, wenn der PC für eine bestimmte Zeitdauer lang nicht verwendet wird, um Energie zu sparen. ■ Spielemodus (Ein/Aus): Wenn Sie eine Spielekonsole, z. B. eine PlayStation™ oder Xbox™, anschließen, sorgt der Spielemodus für ein realistisches Spielerlebnis. ✎HINWEIS x Vorsichtsmaßnahmen und Einschränkungen des Spielemodus – Deaktivieren Sie den Spielemodus im Einstellungsmenü (Aus), um die Spielekonsole zu trennen und ein anderes externes Gerät anzuschließen. – Wenn Sie im Spielemodus das Menü des LEDBildschirms anzeigen, zittert der Bildschirm leicht. x Der Spielemodus ist nicht verfügbar, wenn als Eingangsquelle TV oder PC ausgewählt ist. x Schalten Sie den Spielemodus nach Anschluss der Spielekonsole ein. Die Bildqualität kann sich verschlechtern. x Bei aktiviertem Spielemodus (Ein): – Der Bildmodus ist Standard, und der Tonmodus ist Film. ■ Bedienfeldsperre (Aus/Ein): Sperrt oder entsperrt alle Tasten des vorderen Bedienfelds gleichzeitig. Wenn die Bedienfeldsperre aktiviert ist, funktionieren die vorderen Bedientasten nicht. ■ Boot-Logo (Aus/Ein): Zeigt das Samsung-Logo an, wenn der LED-Bildschirm eingeschaltet wird. Common Interface ■ CI-Menü: Mit dieser Funktion kann der Benutzer aus dem CAMMenü auswählen. Wählen Sie das CI-Menü im Menü der PC Card aus. ■ Anwendungsinformationen: Zeigt Informationen des in den CI-Steckplatz gesteckten CAM sowie der im CAM steckenden „CI- oder CI+-Karte“ an. Sie können das CAM jederzeit sowohl bei eingeschaltetem als auch bei ausgeschaltetem LED-Bildschirm anschließen. 1. Kaufen Sie ein CI CAM-Modul bei Ihrem Händler oder telefonisch. 2. Schieben Sie die „CI- oder CI+-Karte“ fest in Pfeilrichtung in das CAM. 3. Stecken Sie das CAM mit der „CI- oder CI+-Karte“ in Pfeilrichtung in den Common Interface-Steckplatz parallel zum Steckplatz. 4. Überprüfen Sie, ob Sie auf einem verschlüsselten Sender ein Bild sehen. ¦ Bild-in-Bild (PIP) MENUm→ System → PIP → ENTERE Sie können gleichzeitig den Tuner des LED-Bildschirms und eine PIP t externe Videoquelle anzeigen. PIP (Picture-In-Picture) funktioniert nicht im selben Modus. ✎HINWEIS x Lesen Sie zur Einstellung des PIP-Tons die Anweisungen zu Ton wählen. x Wenn Sie den LED-Bildschirm ausschalten, während er sich im PIP-Modus befindet, wird das PIP-Fenster geschlossen. x Das Bild des PIP-Bildschirms wird womöglich etwas unnatürlich, wenn Sie auf dem Hauptbildschirm ein Spiel oder Karaoke ansehen. x Solange Prog.-Sperre/Bew. aktiv ist, können Sie die PIPFunktion nicht verwenden. x PIP-Einstellungen Hauptbild PIP-Bild HDMI, HDMI (PC), Component, PC TV ■ PIP (Aus/Ein): Aktiviert oder deaktiviert die PIP-Funktion. ■ Sender: Wählt den Sender für den zweiten Tuner aus. ■ Größe (Õ / Ã): Wählt die Größe des PIP-Bilds aus. ■ Position (à / – / — / œ): Wählt die Position des PIPBilds aus. ■ Ton wählen (Hauptbild/PIP-Bild): Wählt den gewünschten Ton (Hauptbild / PIP-Bild) im PIP-Modus aus. ¦ DivX® Video-On-Demand Zeigt den Registrierungscode für den Fernseher an. Wenn Sie eine Verbindung mit der DivX-Website herstellen und sich registrieren, können Sie die VOD-Registrierungsdatei herunterladen. Wenn Sie die VOD-Registrierung über Medieninhalte nutzen, ist die Registrierung abgeschlossen. ✎Weitere Informationen zu DivX® VOD erhalten Sie auf „http://vod.divx.com“.Deutsch 30 Grundfunktionen Unterstützungsmenü MENUm→ Unterstützung → ENTERE Eigendiagnose ✎Die Eigendiagnose kann einige Sekunden dauern. Sie gehört zum normalen Betriebsablauf des LED-Bildschirms. ■ Bildtest (Ja/Nein): Verwenden Sie diese Funktion, um auf Bildprobleme zu prüfen. Ja: Wenn das Testbild nicht oder verzerrt angezeigt wird, wählen Sie Ja aus. Es liegt womöglich ein Problem mit dem LED-Bildschirm vor. Hilfe erhalten Sie beim Callcenter von Samsung. Nein: Wenn das Testbild korrekt angezeigt wird, wählen Sie Nein aus. Es liegt womöglich ein Problem mit dem externen Gerät vor. Überprüfen Sie die Anschlüsse. Wenn das Problem weiterhin besteht, schlagen Sie im Benutzerhandbuch für das externe Gerät nach. ■ Audiotest (Ja/Nein): Verwenden Sie die integrierte Melodie, um auf Tonprobleme zu prüfen. Ja: Wenn Sie während des Audiotests nur aus einem Lautsprecher oder gar keinen Ton hören, wählen Sie Ja aus. Es liegt womöglich ein Problem mit dem LED-Bildschirm vor. Hilfe erhalten Sie beim Callcenter von Samsung. Nein: Wenn Sie Ton aus den Lautsprechern hören, wählen Sie Nein aus. Es liegt womöglich ein Problem mit dem externen Gerät vor. Überprüfen Sie die Anschlüsse. Wenn das Problem weiterhin besteht, schlagen Sie im Benutzerhandbuch für das externe Gerät nach. ■ Signalinformation: (nur digitale Sender) Bei HD-Sendern ist der Empfang entweder perfekt, oder der Sender ist nicht verfügbar. Richten Sie die Antenne aus, um die Signalstärke zu verbessern. ■ Zurücksetzen: Setzt alle Einstellungen außer den Netzwerkeinstellungen auf die Werkseinstellungen zurück. Software-Update Das Software-Update kann über ein Sendersignal oder durch Herunterladen der aktuellen Firmware von „www.samsung.com“ auf einen USB-Stick durchgeführt werden. Die aktuelle Version der Software ist bereits auf dem LEDBildschirm installiert. ✎Der Name der Software wird im Format „Jahr/Monat/Tag_Version“ dargestellt. Software-Update PER USB Über den Sender Alternative Software Update im Standby 2 St. später Installieren der aktuellen Version ■ PER USB: Schließen Sie einen USB-Stick, auf dem das von „www. samsung.com“ heruntergeladene Firmware-Update enthalten ist, an den Fernseher an. Während des Updates darf die Stromzufuhr nicht unterbrochen werden, und der USB-Stick darf nicht entfernt werden. Das Gerät schaltet sich nach Abschluss des Firmware-Updates automatisch aus und wieder ein. Wenn Sie die Software aktualisieren, werden die Video- und Audioeinstellungen auf die Standardeinstellungen zurückgesetzt. Notieren Sie sich die Einstellungen, um sie nach dem Update einfach wiederherstellen zu können. ■ Über den Sender: Aktualisieren Sie die Software über das Sendersignal. ✎ Wenn diese Funktion während des Übertragungszeitraums der Software ausgewählt wird, wird die Software automatisch gesucht und heruntergeladen. ✎ Die Dauer des Downloads hängt vom Signalstatus ab. ■ Alternative Software: ersetzt die aktuelle Software durch die Alternative. ■ Update im Standby (Aus/1 St. später/2 St. später/00:00/02:00/12:00/14:00): Zum ausgewählten Zeitpunkt wird ein manuelles Update automatisch durchgeführt. Da das Gerät intern mit Strom versorgt wird, kann der Bildschirm des LED-Geräts heller werden. Dieses Phänomen kann für mehr als 1 Stunde anhalten, bis das Software-Update abgeschlossen ist. Samsung kontaktieren Zeigen Sie diese Informationen an, wenn der LED-Bildschirm nicht ordnungsgemäß funktioniert oder wenn Sie die Software aktualisieren möchten. Hier finden Sie Informationen zu unseren Callcentern sowie zum Herunterladen von Produkten und Software. Startseite Inhalt Nutzen Sie verschiedene nützliche Inhalte. TV-Seite USB-StickDeutsch 31 Erweiterte Funktionen Geben Sie Videos, Fotos und Musik wieder, die auf einem USBMassenspeichergerät gespeichert sind. 1. Drücken Sie auf CONTENT. 2. Drücken Sie auf l / r, um das gewünschte Menü auszuwählen (Media Play ), und drücken Sie anschließend auf ENTERE. CONTENT → Media Play → ENTERE Verwendung von Media Play ¦ Anschließen eines USB-Geräts 1. Schalten Sie Ihr Gerät ein. 2. Schließen Sie ein USB-Gerät mit Foto- und Musikdateien am USB-Anschluss seitlich am Gerät an. 3. Wenn ein USB-Gerät an den Fernseher angeschlossen wird, wird ein Popup-Fenster angezeigt. Wählen Sie Gerät verbunden aus. ✎Dies funktioniert womöglich nicht richtig mit unlizenzierten Multimediadateien. ✎Wissenswertes vor der Verwendung von Media Play x MTP (Media Transfer Protocol) wird nicht unterstützt. x Das Dateisystem unterstützt FAT16, FAT32 und NTFS. x Bestimmte Arten von digitalen USB-Kameras und Audiogeräten sind möglicherweise mit diesem Gerät nicht kompatibel. x Media Play unterstützt nur USB-Massenspeichergeräte. Massenspeichergeräte sind Geräte zur Massenübertragung. Beispiele hierfür sind Speichersticks, Flash-Kartenleser und USB HDD (USB HUBs werden nicht unterstützt). Geräte sollten direkt an den USB-Anschluss des Geräts angeschlossen werden. x USB (HDD) wird nicht unterstützt. x Sichern Sie Ihre Daten, bevor Sie das Gerät an den Fernseher anschließen, um Datenverlust oder Schäden an Daten zu vermeiden. SAMSUNG ist nicht für Datenschäden oder Datenverlust verantwortlich. x Entfernen Sie das USB-Gerät nicht während des Ladevorgangs. x Je höher die Bildauflösung ist, desto länger dauert es, das Bild auf dem Bildschirm anzuzeigen. x Die maximal unterstützte Auflösung für JPEG beträgt 15360 x 8640 Pixel. x Wenn Dateien nicht unterstützt werden oder beschädigt sind, wird die Meldung „Dateiformat wird nicht unterstützt“ angezeigt. x MP3-Dateien mit DRM, die auf nicht freien Websites heruntergeladen wurden, können nicht wiedergegeben werden. DRM (Digital Rights Management) ist eine Technologie, die das integrierte und umfassende Erstellen, Verteilen und Verwalten von Inhalten ermöglicht, einschließlich des Schutzes der Rechte und Interessen der Rechteinhaber, Verhinderung von Raubkopien sowie Verwaltung von Rechnungen. x Auch wenn mehr als 2 PTP-Geräte angeschlossen sind, können Sie nur eines davon gleichzeitig verwenden. x Wenn mehr als 2 MSC-Geräte angeschlossen sind, werden einige womöglich nicht erkannt. USB-Geräte mit einem hohen Energieverbrauch (mehr als 500 mA oder 5 V) werden möglicherweise nicht unterstützt. x Wenn ein Warnhinweis wegen zu hohen Energieverbrauchs angezeigt wird, während Sie ein USB-Gerät anschließen oder verwenden, wird das Gerät womöglich nicht erkannt oder hat Fehlfunktionen. Media Play /Videos / 3,23 GB / 3,55 GB frei Cruzer Blade Videos Fotos Musik R Zurück • Das angezeigte Bild kann je nach Modell unterschiedlich sein. TV-Seite USB-StickDeutsch 32 Erweiterte Funktionen x Wenn der Fernseher während der unter Autom. Schutzzeit festgelegten Zeitdauer kein Eingangssignal empfängt, wird der Bildschirmschoner aktiviert. x Der Energiesparmodus einiger externer Festplatten wird beim Anschluss an den Fernseher automatisch aktiviert. x Wenn ein USB-Verlängerungskabel verwendet wird, wird das USB-Gerät womöglich nicht erkannt, oder die Dateien auf dem USB-Gerät können nicht gelesen werden. x Wenn ein an den Fernseher angeschlossenes USB-Gerät nicht erkannt wird, die Dateiliste auf dem Gerät beschädigt ist oder eine Datei nicht wiedergegeben wird, schließen Sie das USB-Gerät an einen PC an, formatieren Sie es, und überprüfen Sie den Anschluss. x Media Play unterstützt nur sequenziell gespeicherte JPEGs. ¦ Bildschirmanzeige Navigieren Sie mit den Tasten u/d/l/r zu der gewünschten Datei, und drücken Sie auf ENTERE. Die Datei wird wiedergegeben. Der Bildschirm Media Play wird abhängig davon, wie er geöffnet wird, unterschiedlich dargestellt. Inhaltsmodus: Sie können die gewünschte Inhaltskategorie auswählen. Information: Zeigt den ausgewählten Inhalt an. Kategorie (z. B. Musik) Gerät (z. B. USB-Stick) Name und Seite des Ordners/ der Datei Zeigt die Informationen der ausgewählten Datei an. Übergeordneter Ordner Video_02 1. Jan. 2012 Video_02.AVI 1. Jan. 2012 17.6MB Video_03 1. Jan. 2012 Video_04 1. Jan. 2012 Video_05 1. Jan. 2012 Video_06 1. Jan. 2012 Video_07 1. Jan. 2012 Video_08 1. Jan. 2012 Video_01 1. Jan. 2012 Media Play / Videos / Cruzer.../Video_02.AVI 2 / 8 �µ Page Move E Wiederg T Extras R Zurück Bedientasten • � Wechselt zur vorherigen Seite. Nur für Musik verfügbar. • µ Wechselt zur nächsten Seite. Nur für Musik verfügbar. • E Wiederg: Gibt die Mediendatei wieder. • T Extras: Zeigt das Optionsmenü an. • R Zurück: Wechselt zum vorherigen Schritt. • Das angezeigte Bild kann je nach Modell unterschiedlich sein.Deutsch 33 Erweiterte Funktionen Videos Wiedergeben von Videos 1. Drücken Sie auf die Tasten l / r / u / d, um das gewünschte Video in der Dateiliste auszuwählen. 2. Drücken Sie auf ENTERE oder ∂ (Wiedergabe). x Der Name der ausgewählten Datei wird ganz oben mit der Wiedergabezeit angezeigt. x Wenn die Wiedergabezeit unbekannt ist, werden Wiedergabezeit und Fortschrittsbalken nicht angezeigt. x Während der Videowiedergabe können Sie mithilfe der Tasten l und r suchen. x Sie können während der Wiedergabe die Tasten π (REW) und µ (FF) verwenden. ✎ In diesem Modus können Sie die Videos eines Spiels ansehen, jedoch nicht das Spiel selbst spielen. • Das angezeigte Bild kann je nach Modell unterschiedlich sein. Unterstützte Untertitelformate – Extern Name Erweiterung Zeitlich angepasster MPEG-4-Text .ttxt SAMI .smi SubRip .srt SubViewer .sub Micro DVD .sub oder .txt SubStation Alpha .ssa Advanced SubStation Alpha .ass PowerDivX .psb – Intern Name Container Xsub AVI SubStation Alpha MKV Advanced SubStation Alpha MKV SubRip MKV Zeitlich angepasster MPEG-4-Text MP4Deutsch 34 Erweiterte Funktionen Unterstützte Videoformate Dateierweiterung Container Video-Codec Auflösung Framerate (fps) Bitrate (Mbit/s) Kommentare Audio-Codec *.avi *.mkv *.asf *.wmv *.mp4 *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.m2ts *.mts *.divx AVI MKV ASF MP4 3GP VRO VOB PS TS DivX 3.11/4.x/5.1/6.0 1920 x 1080 30 20 [40] GMC nicht unterstützt AC3 LPCM ADMPCM (IMA, MS) AAC HE-AAC WMA DD+ MPEG (MP3) DTS Core Vorbis MPEG4 SP/ASP H.264 BP/MP/ HP ausgenommen FMO/ASO/RS unterstützt BP/MP/HP Level 4.1 H.263 Profile3, auf SD-Auflösung beschränkt Motion JPEG 640 x 480 10 Windows Media Video v9 1920 x 1080 20 [40] VC1 SP/MP/A P L3 unterstützt, L4 nicht unterstützt Simple Profile Medium Level Main Profile High Level Advanced Profile Level 3 WMV9 unterstützt MPEG2 High Profile High Level MPEG1 MPEG-1, außer D-BildDeutsch 35 Erweiterte Funktionen Sonstige Einschränkungen ✎HINWEIS x Wenn es inhaltliche Probleme mit einem Codec gibt, wird dieser nicht unterstützt. x Wenn die Informationen zu einem Container falsch sind und die Datei fehlerhaft ist, kann der Container nicht korrekt wiedergegeben werden. x Töne oder Video können nicht funktionieren, wenn der Inhalt eine Standard-Bitrate/Framerate hat, die über den kompatiblen Frames/s in der obigen Tabelle liegt. x Wenn die Indextabelle fehlerhaft ist, wird die Suchen (Jump)-Funktion nicht unterstützt. x Wenn Sie ein Video über eine Netzwerkverbindung wiedergeben, kann es zu Ruckeln kommen. Name Format x Unterstützung von H.264 bis Level 4.1 x H.264 FMO/ASO/RS, VC1 SP/MP/AP L4 und AVCHD werden nicht unterstützt. x MPEG4 SP, ASP: – unter 1280 x 720: max. 60 Frames – über 1280 x 720: max. 30 Frames x GMC 2 oder höher wird nicht unterstützt. x Unterstützung von WMA 7, 8, 9, STD x WMA 9 Pro unterstützt nicht mehr als einen Kanal oder verlustfreies Audio. x Die WMA-Abtastrate 22050 Hz Mono wird nicht unterstützt. Fotos Anzeigen eines Fotos (oder einer Diashow) 1. Drücken Sie auf u/d/l/r, um das gewünschte Foto in der Dateiliste auszuwählen. 2. Drücken Sie auf ENTERE. – Wenn ein ausgewähltes Foto angezeigt wird, können Sie die Diashow durch Drücken auf ENTERE starten. – In der Diashow werden alle Dateien in der Liste nacheinander angezeigt. ✎Wenn die Option Hintergrundmusik aktiviert ist (Ein), können Musikdateien während der Diashow automatisch wiedergegeben werden. ✎Die Hintergrundmusik kann erst geändert werden, wenn das BGM fertig geladen ist. • Das angezeigte Bild kann je nach Modell unterschiedlich sein. 0801181247070.JPG 1. Jan. 2012 663.0KB 1920 x 1080 �µPage Move E Wiederg T Extras R Zurück Media Play /Fotos / Cruzer... /Fotos/0801181... .JPG 7 / 1000 Übergeordneter Ordner Unterstützte Bildformate Dateierweiterung Format Auflösung *.jpg JPEG 15360 x 8640 *.bmp BMP 1920 x 1080 *.mpo MPO 15360 x 8640Deutsch 36 Erweiterte Funktionen Musik Wiedergeben von Musik 1. Drücken Sie auf u/d, um die gewünschte Musik in der Dateiliste auszuwählen. 2. Drücken Sie auf ENTERE. ✎Zeigt nur Dateien mit einer Erweiterung an, die in der unten stehenden Liste der unterstützten Musikformate enthalten ist. Dateien mit anderen Dateiendungen werden nicht angezeigt, auch wenn sie auf dem USBGerät gespeichert sind. ✎Wenn der Ton bei der Wiedergabe von MP3-Dateien nicht normal ist, passen Sie ihn mit dem Equalizer im Menü Ton an. (Eine übermodulierte MP3-Datei kann Tonprobleme verursachen.) • Das angezeigte Bild kann je nach Modell unterschiedlich sein. Media Play / Musik / Cruzer... / Musik / Musik_01.mp3 Musik_01 Künstler 1 Musik_02 Künstler 2 Musik_01 Künstler 1 2003 Fallen Sonstiges 2:36 / 5:00 Musik_03 Künstler 3 Musik_04 Künstler 4 Musik_05 Künstler 5 Musik_06 Künstler 6 Musik_07 Künstler 7 Musik_08 Künstler 8 Musik_09 Künstler 9 Übergeordneter Ordner b{ Page Move EWiederg T ExtrasR Zurück Wiedergeben der ausgewählten Musik 1. Drücken Sie auf TOOLST, und wählen Sie Ausw. wiederg. aus. 2. Wählen Sie die gewünschte Musik aus. ✎ Links neben den ausgewählten Dateien wird das Kennzeichen c angezeigt. 3. Drücken Sie auf TOOLST, und wählen Sie Ausw. wiederg. aus. ✎ Drücken Sie auf Alle wählen/Alle abwählen, um alle Musikdateien auszuwählen oder die Auswahl aufzuheben. Unterstützte Musikformate Dateierweiterung Typ Codec *.mp3 MPEG MPEG1-Audio Layer 3 *.m4a *.mpa *.aac *.3ga MPEG4 AAC *.flac FLAC FLAC *.ogg OGG Vorbis *.wma WMA WMADeutsch 37 Erweiterte Funktionen ¦ Media Play - Zusätzliche Funktionen Menü mit Optionen zur Wiedergabe von Videos/Fotos/Musik Wenn Sie auf TOOLST drücken, können Sie folgende Aufgaben ausführen: Kategorie Wirkung Videos Fotos Musik Zufallswiedergabemodus Sie können die Musik in zufälliger Reihenfolge wiedergeben. > Wiederholmodus Sie können Mediendateien wiederholt wiedergeben. > > Bildmodus Sie können die Bildeinstellungen anpassen. > > Tonmodus Sie können die Toneinstellungen anpassen. > > > Diashow starten / Diashow anhalten Sie können eine Diashow starten oder anhalten. > Diashow-Geschw. Sie können die Diashow-Geschwindigkeit während der Diashow auswählen. > Hintergrundmusik Sie können die Hintergrundmusik für die Diashow aktivieren/deaktivieren. > Einstellung der Hintergrundmusik Sie können die Hintergrundmusik für die Diashow auswählen. > Zoom Sie können Bilder auf ein Vollbild vergrößern. > Drehen Sie können Bilder im Vollbildmodus drehen. > Information Sie können detaillierte Informationen zu der wiedergegebenen Datei anzeigen. > > > Ausw. wiederg. Sie können die ausgewählten Elemente wiedergeben. > > > Titelsuche Sie können direkt zu einem anderen Titel springen. > Zeitsuche Sie können den Film mit den Tasten l und r in Intervallen von 1 Minute durchsuchen. > Bildformat Sie können das Bildformat nach Ihren Wünschen ändern. > Untertitel Sie können Untertitel ein- oder ausschalten Ein bzw. Aus. > Untertiteleinstell. Diese Option ist nur verfügbar, wenn die Namen der Untertiteldatei und der Videodatei übereinstimmen. > Wiedergabesprache Die Option ist nur verfügbar, wenn eine Datei vom Typ Stream, die mehrere Audioformate unterstützt, wiedergegeben wird. >Deutsch 38 Weitere Informationen Teletextfunktion für Analogsender Die Indexseite des Teletextdienstes enthält Informationen zur Verwendung des Dienstes. Damit die Teletextinformationen korrekt angezeigt werden, muss ein stabiler Empfang gewährleistet sein. Ansonsten können Informationen fehlen bzw. einzelne Seiten nicht angezeigt werden. ✎Sie können durch Drücken der Zifferntasten auf der Fernbedienung die Teletextseiten wechseln. 1 / (Teletext ein/halb/aus): Aktiviert den Teletextmodus für den aktuellen Sender. Drücken Sie diese Taste zweimal, um den Teletext gleichzeitig mit der aktuellen Sendung auf dem Bildschirm einzublenden. Drücken Sie diese Taste erneut, um den Teletext zu beenden. 2 8 (Speichern): Speichert die Teletextseiten. 3 6 (Index): Zeigt die Index-(Inhalts-) Seite an, während Sie den Teletext anzeigen. 4 4 (Größe): Zeigt den Teletext in der oberen Bildschirmhälfte in doppelter Größe an. Drücken Sie die Taste erneut, um zur unteren Hälfte des Bildschirms zu wechseln. Drücken Sie die Taste erneut, um zur normalen Anzeige zurückzukehren. 5 9 (Halten): Hält die Anzeige auf der aktuellen Seite, wenn mehrere Sekundärseiten automatisch angezeigt werden. Drücken Sie die Taste erneut, um die Funktion aufzuheben. 6 Farbtasten (rot, grün, gelb, blau): Wenn die Rundfunkanstalt das FASTEXT-System verwendet, sind die einzelnen Themen der Teletextseite farbig gekennzeichnet, und Sie können die Themen durch Drücken der Farbtaste auswählen. Drücken Sie auf die Farbe zum Thema Ihrer Wahl. Es wird eine neue farbig gekennzeichnete Seite angezeigt. Die Elemente können auf dieselbe Weise ausgewählt werden. Drücken Sie auf die entsprechende Farbtaste, um die vorherige bzw. nächste Seite anzuzeigen. 7 0 (Modus): Wählt den Teletextmoddus (LIST/FLOF) aus. Wenn Sie diese Taste im LISTModus drücken, wechselt der Modus zum Listenspeichermodus. Im Listenspeichermodus können Sie eine Teletextseite mit der Taste 8 (Speichern) in einer Liste speichern. 8 1 (Unterseite): Zeigt verfügbare Unterseiten an. 9 2 (Seite hoch): Zeigt die nächste Teletextseite an. 0 3 (Seite runter): Zeigt die vorherige Teletextseite an. ! 5 (Anzeigen): Zeigt verborgenen Text an (z. B. Antworten zu Quizfragen). Drücken Sie die Taste erneut, um den normalen Bildschirm anzuzeigen. @ 7 (Abbrechen): Verkleinert die Teletextanzeige, so dass sich diese mit dem aktuellen Sender überlappt. Typische Teletextseite Teil Inhaltsverzeichnis A Ausgewählte Seitennummer. B Name des Senders. C Aktuelle Seitennummer oder Suchnummer. D Datum und Zeit. E Text. F Statusinformationen. FASTEXT-Informationen. 7 8 9 0 ! @ 3 1 4 5 6 2Deutsch 39 Weitere Informationen Befestigen einer Wandhalterung/eines Standfußes Vorbereitende Arbeiten 1. Schalten Sie das Gerät aus, und ziehen Sie das Netzkabel aus der Steckdose. 2. Legen Sie das Gerät mit der Anzeige nach unten auf einer flachen Oberfläche auf ein Tuch oder Kissen. 3. Halten Sie das Gerätegehäuse mit einer Hand fest. Ziehen Sie den Standfuß in Pfeilrichtung ab, um ihn vom Gehäuse zu trennen (sh. Abbildung). Befestigen einer Wandhalterung/eines Standfußes 1 A 2 3 4 [ACHTUNG Wichtig Verwenden Sie für die Montage der Wandhalterung keine Schrauben, die länger als 14 mm (L14) sind. 4. Richten Sie die Wandhalterung/den Standfuß auf den Monitor/LED-Bildschirm aus, und ziehen Sie die Schrauben fest an. 5. Richten Sie die Aussparung des Verbindungsstücks für die Halterung auf die Aussparung der Halterung aus (Standfuß, Wandhalterung usw.), und ziehen Sie die Schrauben fest an. A B Wandmontagekit/Standfuß (nicht im Lieferumfang enthalten) A Wandhalterung/Standfuß BDeutsch 40 Weitere Informationen ✎HINWEIS x Wenn die Schrauben länger sind als angegeben, kann das Produkt von innen beschädigt werden. x Bei Wandhalterungen, die nicht den VESA-Standard einhalten, kann die Länge der Schrauben je nach entsprechenden Spezifikationen variieren. x Verwenden Sie keine Schrauben, die den VESA-Standard nicht einhalten, und ziehen Sie die Schrauben nicht mit übermäßiger Kraft fest. Dies kann zu Schäden am Gerät oder zu Verletzungen führen, wenn das Gerät herunterfällt. Samsung ist für solchermaßen entstandene Schäden oder Verletzungen nicht haftbar. x Samsung haftet nicht für Schäden oder Verletzungen, die durch die Verwendung einer Wandhalterung/eines Standfußes entstehen, die/der nicht den Spezifikationen entspricht, oder wenn die Montage nicht durch einen autorisierten Installationstechniker erfolgt ist. x Wenn Sie das Produkt mit einer Wandhalterung befestigen, kaufen Sie eine Wandhalterung, die das Gerät mindestens 10 cm von der Wand entfernt hält. x Verwenden Sie die Wandhalterung gemäß den internationalen Spezifikationen. Kensington-Schloss zur Diebstahlsicherung Das Kensington-Schloss wird nicht von Samsung bereitgestellt. Mit diesem Gerät kann das System an öffentlichen Orten physisch fixiert werden. Je nach Hersteller können sich das Erscheinungsbild und der Sperrmechanismus von der Abbildung unterscheiden. Weitere Informationen zur korrekten Verwendung finden Sie im Handbuch des Kensington-Schlosses. ✎Auf der Rückseite des LED-Bildschirms befindet sich das Symbol „K“. Neben dem Symbol „K“ befindet sich ein Steckplatz für das Kensington-Schloss. Gehen Sie folgendermaßen vor, um das Gerät zu sperren: 1. Wickeln Sie das Kabel des Kensington-Schlosses um ein großes, stationäres Objekt, z. B. einen Tisch oder Stuhl. 2. Ziehen Sie das Ende des Kabels, an dem sich das Schloss befindet, durch die Schleife am anderen Ende des Kabels am Kensington-Schloss. 3. Führen Sie die Verriegelung in den Kensington-Einschub am Monitor ein (1). 4. Verschließen Sie das Schloss. 1 ✎Dies sind allgemeine Anweisungen. Genaue Anweisungen finden Sie im Benutzerhandbuch des Schlosses. ✎Das Schloss ist separat erhältlich. ✎Der Kensington-Steckplatz kann sich je nach Modell des LED-Bildschirms an einer anderen Stelle befinden.Deutsch 41 Weitere Informationen Fehlerbehebung Wenn Sie Fragen zu dem LED-Bildschirm haben, sehen Sie zuerst in dieser Liste nach. Wenn Sie Ihren Fehler in dieser Liste nicht finden, gehen Sie bitte auf „www.samsung.com“, und klicken Sie auf „Support“. Sie können sich auch an das auf der Rückseite dieses Benutzerhandbuchs angegebene Callcenter wenden. Problem Lösung und Erläuterungen Bildqualität Führen Sie zunächst einen Bildtest durch, um zu bestätigen, ob das Testbild korrekt angezeigt wird. (MENU - Unterstützung - Eigendiagnose - Bildtest) Wenn das Testbild korrekt angezeigt wird, kann die schlechte Bildqualität durch die Signalquelle oder Signalstärke verursacht werden. Das Bild des LED-Bildschirms sieht nicht so gut aus wie im Laden. • Wenn Sie nur eine analoge Kabel- oder Set-Top-Box haben, kaufen Sie sich eine digitale Set-Top-Box. Verwenden Sie für HD-Bildqualität ein HDMI-Kabel. • Kabel-/Satellitenbenutzer: Probieren Sie die HD-Stationen aus der Senderliste aus. • Antennenanschluss: Führen Sie den automatischen Sendersuchlauf aus, und probieren Sie es anschließend mit den HD-Stationen. ✎ Viele HD-Sender werden von SD-Inhalten hochskaliert. • Passen Sie die Auflösung der Kabel-/Set-Top-Box auf 1080i oder 720p an. • Halten Sie beim Betrachten des LED-Bildschirms den empfohlenen Mindestabstand für die Größe und die Definition des Signals ein. Das Bild ist verzerrt: Macroblockfehler, kleine Blöcke, Punkte, Pixelierung. • Durch die Komprimierung von Videoinhalten kann es insbesondere bei schnell wechselnden Bildern (z. B. bei Sportsendungen oder Actionfilmen) zu Bildverzerrungen kommen. • Ein schwaches Signal oder schlechte Signalqualität können zu einem verzerrten Bild führen. Dies ist kein Problem mit dem LED-Bildschirm. • Wenn Sie in der Nähe des LED-Bildschirms (bis zu 1 m) ein Mobiltelefon verwenden, kann dies bei analogem und digitalem Bild das Bild verzerren. Die Farbe oder Helligkeit ist schlecht. • Passen Sie die Bildoptionen im Menü an. (Bildmodus/Farbe/Helligkeit/Schärfe) • Passen Sie die Optionen des Energiesparmod. im Menü an. (MENU - System - Öko-Lösung - Energiesparmod.) • Versuchen Sie, das Bild auf die Standardeinstellungen zurückzusetzen. (MENU - Bild - Bild zurücksetzen) Am Bildschirmrand ist eine gepunktete Linie. • Wenn die Option Bildanpassung aktiviert ist, wechseln Sie zu 16:9. • Ändern Sie die Auflösung des Kabel-/Satellitenempfängers. Beim Senderwechsel friert das Bild ein oder ist verzerrt bzw. verzögert. • Wenn das Gerät an einen Kabelempfänger angeschlossen ist, versuchen Sie, den Kabelempfänger neu zu starten. Schließen Sie das AC-Kabel neu an, und warten Sie, bis der Kabelempfänger neu gestartet wurde. Dieser Vorgang kann bis zu 20 Minuten dauern. • Stellen Sie die Auflösung des Kabelempfängers auf 1080i oder 720p. Tonqualität Führen Sie zunächst einen Audiotest durch, um zu bestätigen, ob der Ton des LED-Bildschirms korrekt funktioniert. (MENU - Unterstützung - Eigendiagnose - Audiotest) Wenn der Ton OK ist, kann das Tonproblem durch die Quelle oder das Signal verursacht werden. Es ist kein Ton zu hören, oder der Ton ist auch auf maximaler Lautstärke zu leise. • Überprüfen Sie die Lautstärke des an den LED-Bildschirm angeschlossenen Geräts (Kabel-/ Satellitenempfänger, DVD-/Blu-ray-Player usw.). Die Bildqualität ist gut, aber es ist kein Ton zu hören. • Wenn Sie ein HDMI/DVI-Kabel verwenden, wird Ton nicht unterstützt. • Starten Sie das angeschlossene Gerät neu, indem Sie das Netzkabel entfernen und wieder anschließen. • Wenn der LED-Bildschirm über einen Kopfhöreranschluss verfügt, stellen Sie sicher, dass kein Gerät dort angeschlossen ist. Es ist ein seltsames Geräusch aus den Lautsprechern zu hören. • Überprüfen Sie bei Antennen- oder Kabelanschluss die Signalstärke. Eine geringe Signalstärke kann den Ton verzerren. Kein Bild, kein Video Der LED-Bildschirm lässt sich nicht einschalten. • Stellen Sie sicher, dass das AC-Netzkabel fest an die Steckdose und den LED-Bildschirm angeschlossen ist. • Stellen Sie sicher, dass die Steckdose funktioniert. • Drücken Sie die POWER-Taste am Gerät, um sicherzustellen, dass das Problem nicht an der Fernbedienung liegt. Wenn sich der LED-Bildschirm einschalten lässt, sehen Sie unten unter „Die Fernbedienung funktioniert nicht“ nach. Der LED-Bildschirm schaltet sich automatisch aus. • Stellen Sie sicher, dass der Sleep-Timer im Menü Zeit deaktiviert ist (Aus). • Wenn ein PC an den LED-Bildschirm angeschlossen ist, überprüfen Sie die Energiesparoptionen des PCs. • Stellen Sie sicher, dass das AC-Netzkabel fest an die Steckdose und den LED-Bildschirm angeschlossen ist. • Wenn Sie einen Antennen- oder Kabelanschluss verwenden, schaltet sich der LED-Bildschirm nach 10- 15 Minuten automatisch aus, wenn er kein Signal empfängt.Deutsch 42 Weitere Informationen Problem Lösung und Erläuterungen Es wird kein Bild/Video angezeigt. • Überprüfen Sie die Kabelanschlüsse (entfernen Sie alle an den LED-Bildschirm und externe Geräte angeschlossenen Kabel, und schließen Sie sie dann wieder an). • Verwenden Sie für den Videoausgang der externen Geräte (Kabel-/Satellitenempfänger, DVD-/Blu-rayPlayer usw.) denselben Ausgang wie den Eingang des LED-Bildschirms. Wenn Sie z. B. den HDMI-Ausgang eines externen Geräts verwenden, muss es mit dem HDMI-Eingang des LED-Bildschirms verbunden sein. • Achten Sie darauf, dass alle angeschlossenen Geräte eingeschaltet sind. • Wählen Sie mit der Taste SOURCE auf der Fernbedienung die korrekte Quelle aus. • Starten Sie das angeschlossene Gerät neu, indem Sie das Netzkabel entfernen und wieder anschließen. HF-(Kabel-/Antennen-)Anschluss Der LED-Bildschirm empfängt nicht alle Sender. • Stellen Sie sicher, dass das Antennenkabel richtig angeschlossen ist. • Führen Sie Einstell. (Inbetriebnahme) aus, um verfügbare Sender zur Senderliste hinzuzufügen. Öffnen Sie MENU - System - Einstell. (Inbetriebnahme), und warten Sie, bis alle verfügbaren Sender gespeichert wurden. • Überprüfen Sie, dass die Antenne korrekt positioniert ist. Das Bild ist verzerrt: Macroblockfehler, kleine Blöcke, Punkte, Pixelierung. • Durch die Komprimierung von Videoinhalten kann es insbesondere bei schnell wechselnden Bildern (z. B. bei Sportsendungen oder Actionfilmen) zu Bildverzerrungen kommen. • Eine niedrige Signalstärke kann das Bild verzerren. Dies ist kein Problem mit dem LED-Bildschirm. Andere Das Bild wird nicht im Vollbildmodus angezeigt. • HD-Sender haben links und rechts schwarze Balken, wenn SD-(4:3)Inhalte hochskaliert werden. • Bei der Wiedergabe von Filmen mit einem anderen Seitenverhältnis als dem LED-Bildschirm werden oben und unten schwarze Balken angezeigt. • Passen Sie die Bildformatoptionen Ihres externen Geräts oder LED-Bildschirms auf Vollbild an. Die Fernbedienung funktioniert nicht. • Wechseln Sie die Batterien der Fernbedienung aus. Achten Sie dabei auf die richtige Polung (+/-). • Reinigen Sie das Sensorfenster an der Fernbedienung. • Versuchen Sie, die Fernbedienung aus einer Entfernung von ca. 2 m direkt auf den LED-Bildschirm zu richten. Sie können mit der Fernbedienung des Kabel-/Satellitenempfängers den LEDBildschirm nicht ein- oder ausschalten, sondern nur die Lautstärke anpassen. • Programmieren Sie die Fernbedienung des Kabel-/Satellitenempfängers, damit diese mit dem LEDBildschirm funktioniert. Den Code des SAMSUNG-LED-Bildschirms finden Sie im Benutzerhandbuch des Kabel-/Satellitenempfängers. Auf dem Bildschirm wird die Meldung „Modus nicht unterstützt“ angezeigt. • Überprüfen Sie die unterstützte Auflösung des LED-Bildschirms, und passen Sie die Auflösung des externen Geräts entsprechend an. Der LED-Bildschirm riecht nach Kunststoff. • Dieser Geruch ist normal und wird mit der Zeit schwächer. Die Signalinformation des LED-Bildschirms im Testmenü Eigendiagnose ist nicht verfügbar. • Diese Funktion ist nur für digitale Sender über einen Antennen-/HF-/Koaxialanschluss verfügbar. Der LED-Bildschirm ist nach rechts oder links geneigt. • Entfernen Sie den Standfuß des LED-Bildschirms, und montieren Sie ihn erneut. Der Standfuß lässt sich nur schwer montieren. • Achten Sie darauf, dass der LED-Bildschirm auf einer flachen Oberfläche liegt. Wenn Sie die Schrauben des LED-Bildschirms nicht entfernen können, verwenden Sie bitte einen Magnetschraubendreher. Das Sendermenü ist grau unterlegt (nicht verfügbar). • Das Sendermenü ist nur verfügbar, wenn eine Quelle ausgewählt wurde. Die Einstellungen gehen nach 30 Minuten bzw. bei jedem Ausschalten des LEDBildschirms verloren. • Wenn der Shop-Demo-Modus aktiviert ist, werden die Ton- und Bildeinstellungen nach 30 Minuten zurückgesetzt. Ändern Sie die Einstellungen über Einstell. (Inbetriebnahme) von Shop-Demo auf Privatgebrauch. Drücken Sie auf SOURCE, um den TV-Modus auszuwählen. Drücken Sie dann auf MENU → System → Einstell. (Inbetriebnahme) → ENTERE. Das Audio- bzw. Videosignal geht zeitweise verloren. • Überprüfen Sie die Kabelanschlüsse, und schließen Sie die Kabel erneut an. • Ton- oder Videoverlust kann auftreten, wenn Sie zu steife oder dicke Kabel verwenden. Achten Sie darauf, dass die Kabel für die Langzeitverwendung flexibel genug sind. Wenn Sie den LED-Bildschirm an der Wand aufhängen, empfehlen wir die Verwendung von Kabeln mit 90°-Steckern. Am Rand des LED-Bildschirms sind bei genauem Hinsehen kleine Partikel zu sehen. • Dies ist Teil des Produktdesigns und kein Defekt.Deutsch 43 Weitere Informationen Problem Lösung und Erläuterungen Das PIP-Menü ist nicht verfügbar. • PIP ist nur verfügbar, wenn Sie eine HDMI-Quelle verwenden. Sie haben den LED-Bildschirm vor 45 Minuten ausgeschaltet, und jetzt hat er sich wieder eingeschaltet. • Das ist normal. Der LED-Bildschirm führt die OTA-Funktion selbständig aus, um die während des Betriebs heruntergeladene Firmware zu aktualisieren. Die Meldung „Verschlüsseltes Signal“ oder „Schwaches / kein Signal“ wird angezeigt. • Wenn Sie eine CAM-Card (CI/CI+) verwenden, überprüfen Sie, ob diese im Common Interface-Steckplatz eingesteckt ist. • Wenn das Problem weiterhin besteht, entfernen Sie die CAM-Card aus dem LED-Bildschirm, und stecken Sie sie erneut in den Steckplatz. Es treten wiederholt Bild-/Tonprobleme auf. • Überprüfen und wechseln Sie das Signal/die Quelle. Zwischen den Gumminoppen des Standfußes und bestimmten Oberflächenbeschichtungen von Möbeln kann es zu Reaktionen kommen. • Verwenden Sie auf Oberflächen, auf denen der LED-Bildschirm in direkten Kontakt mit Möbeln kommt, Filznoppen, um dies zu vermeiden. ✎Diese Anzeige besteht aus Teilpixeln, die durch ein hochmodernes Herstellungsverfahren produziert werden. Einige Pixel auf dem Bildschirm können jedoch etwas heller oder dunkler dargestellt werden. Dies hat jedoch keine Auswirkungen auf die Leistung des Geräts. ¦ Lagerung und Wartung ✎Wenn Sie Aufkleber auf der Anzeige des LED-Bildschirms anbringen, bleiben beim Entfernen Reste zurück. Reinigen Sie den Bildschirm vor der Verwendung. ✎Das Gehäuse und der Bildschirm des Geräts sind kratzanfällig. Verwenden Sie zum Reinigen das mitgelieferte Tuch oder ein weiches Tuch, um Kratzer zu vermeiden. Spritzen Sie weder Wasser noch Reinigungsmittel direkt auf das Gerät. Wenn Flüssigkeit in das Gerät gelangt, kann dies zu Fehlern, Bränden oder elektrischen Schlägen führen. Reinigen Sie das Gerät mit einem feuchten weichen Tuch. [ACHTUNG Passen Sie die Höhe an, wenn die Höhe „ A“ nicht auf beiden Seiten identisch ist.Deutsch 44 Weitere Informationen ¦ Lizenz TheaterSound HD, SRS and the symbol are trademarks of SRS Labs, Inc. TheaterSound HD technology is incorporated under licence from SRS Labs, Inc. Hergestellt unter Lizenz von Dolby Laboratories. Dolby und das Doppel-D-Symbol sind Marken von Dolby Laboratories. 2.0 Channel Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. (Nur für die TB300-Serie verfügbar.) Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product Includes software. © DTS, Inc. All Rights Reserved. (Nur für die TB350-Serie verfügbar.) Open Source-Lizenzhinweis Wenn Open Source-Software verwendet wird, sind die Open Source-Lizenzen im Produktmenü verfügbar. Der Open Source-Lizenzhinweis ist nur auf Englisch verfügbar. ¦ WEEE Korrekte Entsorgung von Altgeräten (Elektroschrott) (In den Ländern der Europäischen Union und anderen europäischen Ländern mit einem separaten Sammelsystem) Die Kennzeichnung auf dem Produkt, Zubehörteilen bzw. auf der dazugehörigen Dokumentation gibt an, dass das Produkt und Zubehörteile (z. B. Ladegerät, Kopfhörer, USB-Kabel) nach ihrer Lebensdauer nicht zusammen mit dem normalen Haushaltsmüll entsorgt werden dürfen. Entsorgen Sie dieses Gerät und Zubehörteile bitte getrennt von anderen Abfällen, um der Umwelt bzw. der menschlichen Gesundheit nicht durch unkontrollierte Müllbeseitigung zu schaden. Helfen Sie mit, das Altgerät und Zubehörteile fachgerecht zu entsorgen, um die nachhaltige Wiederverwertung von stofflichen Ressourcen zu fördern. Private Nutzer wenden sich an den Händler, bei dem das Produkt gekauft wurde, oder kontaktieren die zuständigen Behörden, um in Erfahrung zu bringen, wo Sie das Altgerät bzw. Zubehörteile für eine umweltfreundliche Entsorgung abgeben können. Gewerbliche Nutzer wenden sich an ihren Lieferanten und gehen nach den Bedingungen des Verkaufsvertrags vor. Dieses Produkt und elektronische Zubehörteile dürfen nicht zusammen mit anderem Gewerbemüll entsorgt werden. Korrekte Entsorgung des Akkus dieses Produkts (In den Ländern der Europäischen Union und anderen europäischen Ländern mit einem separaten Altbatterie-Rücknahmesystem) Die Kennzeichnung auf dem Akku bzw. auf der dazugehörigen Dokumentation oder Verpackung gibt an, dass der Akku zu diesem Produkt nach seiner Lebensdauer nicht zusammen mit dem normalen Haushaltsmüll entsorgt werden darf. Wenn die Batterie mit den chemischen Symbolen Hg, Cd oder Pb gekennzeichnet ist, liegt der Quecksilber-, Cadmium- oder Blei-Gehalt der Batterie über den in der EG-Richtlinie 2006/66 festgelegten Grenzwerten.Wenn Batterien nicht ordnungsgemäß entsorgt werden, können diese Substanzen schädlich für Gesundheit und Umwelt sein. Bitte helfen Sie, die natürlichen Ressourcen zu schützen und die nachhaltige Wiederverwertung von stofflichen Ressourcen zu fördern, indem Sie die Akkus von anderen Abfällen getrennt über Ihr örtliches kostenloses AltbatterieRücknahmesystem entsorgen.Deutsch 45 Weitere Informationen Technische Daten Umgebungsbedingungen Betrieb Temperatur: 10° C – 40° C (50°F ~ 104°F) Luftfeuchtigkeit: 10 % – 80 %, nicht kondensierend Lagerung Temperatur: -20°C ~ 45°C (-4°F ~ 113°F) Luftfeuchtigkeit: 5 % – 95 %, nicht kondensierend Neigen -1°(±2°) ~ 20°(±2°) LED-Anzeigesystem Analog: B/G, D/K, L, I (Abhängig vom ausgewählten Land) Digital: DVB-T/DVB-C Farb-/Videosystem Analog: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60 Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0 Tonsystem BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC HDMI IN Video: 1080 24p, 1080p, 1080i, 720p, 576p, 480p Audio: 2Ch Linear PCM 32/44.1/48kHz, 16/20/24bits. Modellname T19B300 T22B300 T24B300 T27B300 Bildschirmgröße (Diagonal) 18,5 Zoll (47 cm) 21,5 Zoll (55 cm) 23,6 Zoll (60 cm) 27 Zoll (69 cm) Anzeigeauflösung 1366 x 768 bei 60Hz 1920 x 1080 bei 60Hz Ton (Ausgang) 5W × 2 Abmessungen (BxTxH) (ohne Standfuß) 444,7 x 52,6 x 278,2 mm 509,7 x 51,5 x 318,2 mm 569,2 x 53,4 x 349,4 mm 643,3 x 53,4 x 397,9 mm (mit Standfuß) 444,7 x 187 x 356,4 mm 509,7 x 195 x 396,6 mm 569,2 x 195 x 428 mm 643,3 x 252 x 476,5 mm Gewicht (ohne Standfuß) 2,95 kg 3,7 kg 4,25 kg 5,1 kg (mit Standfuß) 3,2 kg 3,95 kg 4,5 kg 5,6 kg Modellname T22B350 T23B350 T24B350 Bildschirmgröße (Diagonal) 21,5 Zoll (55 cm) 23 Zoll (58 cm) 24 Zoll (61 cm) Anzeigeauflösung 1920 x 1080 bei 60Hz Ton (Ausgang) 5W × 2 Abmessungen (BxTxH) (ohne Standfuß) 509,7 x 51,5 x 318,2 mm 547,5 x 53,4 x 337,9 mm 569,2 x 53,4 x 349,4 mm (mit Standfuß) 509,7 x 195 x 396,6 mm 547,5 x 195 x 416,1 mm 569,2 x 195 x 428 mm Gewicht (ohne Standfuß) 3,7 kg 3,25 kg 4,15 kg (mit Standfuß) 3,95 kg 3,5 kg 4,45 kg ✎HINWEIS x Änderungen der technischen Daten und des Geräte-Designs vorbehalten. x Informationen zur Netzspannung und zum Stromverbrauch sh. Aufkleber auf dem Gerät. x Es sind nicht alle Modelle in allen Regionen verfügbar. x Wenn keine Ein-/Aus-Taste vorhanden ist, ziehen Sie den Netzstecker, um den Stromverbrauch auf „0“ zu senken. x Die Bildschirmenergiesparfunktion funktioniert nicht in Verbindung mit dem HDMI IN (DVI)-Anschluss des Geräts.Kontakt zu SAMSUNG WORLDWIDE Falls Sie Fragen oder Anregungen zu Samsung-Produkten haben, wenden Sie sich bitte an das SAMSUNG-Kundendienstcenter. Land Kundendienstcenter Website EUROPE ALBANIA 42 27 5755 http://www.samsung.com AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) http://www.samsung.com BELGIUM 02-201-24-18 http://www.samsung.com/be (Dutch) http://www.samsung.com/be_fr (French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 http://www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com Samsung Electronics Czech and Slovak, s.r.o.,Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8 DENMARK 70 70 19 70 http://www.samsung.com FINLAND 030 - 6227 515 http://www.samsung.com FRANCE 01 48 63 00 00 http://www.samsung.com GERMANY 01805 - SAMSUNG (726-7864, € 0,14/Min) http://www.samsung.com CYPRUS From landline : 8009 4000 http://www.samsung.com GREECE From landline : 80111-SAMSUNG (7267864) From landline & mobile : (+30)210 6897691 http://www.samsung.com HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.com ITALIA 800-SAMSUNG (726-7864) http://www.samsung.com KOSOVO +381 0113216899 http://www.samsung.com LUXEMBURG 261 03 710 http://www.samsung.com MACEDONIA 023 207 777 http://www.samsung.com MONTENEGRO 020 405 888 http://www.samsung.com NETHERLANDS 0900-SAMSUNG (0900-7267864) ( € 0,10/Min) http://www.samsung.com NORWAY 815-56 480 http://www.samsung.com POLAND 0 801-1SAMSUNG (172-678) +48 22 607-93-33 http://www.samsung.com PORTUGAL 80820-SAMSUNG (808207267) http://www.samsung.com RUMANIA From landline : 08010-SAMSUNG (7267864) From landline & mobile : (+40)21 206 01 10 http://www.samsung.com SERBIA 0700 SAMSUNG (0700 726 7864) http://www.samsung.com SLOVAKIA 0800 - SAMSUNG (0800-726 786) www.samsung.com/sk SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) http://www.samsung.com/ch http://www.samsung.com/ch_fr (French) U.K 0330 SAMSUNG (7267864) http://www.samsung.com EIRE 0818 717100 http://www.samsung.com LITHUANIA 8-800-77777 http://www.samsung.com LATVIA 8000-7267 http://www.samsung.com ESTONIA 800-7267 http://www.samsung.com TURKEY 444 77 11 http://www.samsung.com CIS RUSSIA 8-800-555-55-55 http://www.samsung.com GEORGIA 8-800-555-555 http://www.samsung.com ARMENIA 0-800-05-555 http://www.samsung.com AZERBAIJAN 088-55-55-555 http://www.samsung.com KAZAKHSTAN 8-10-800-500-55-500(GSM: 7799) http://www.samsung.com UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.com KYRGYZSTAN 00-800-500-55-500 http://www.samsung.comLand Kundendienstcenter Website MONGOLIA http://www.samsung.com UKRAINE 0-800-502-000 http://www.samsung.com/ua http://www.samsung.com/ua_ru BELARUS 810-800-500-55-500 http://www.samsung.com MOLDOVA 00-800-500-55-500 http://www.samsung.com ASIA PACIFIC AUSTRALIA 1300 362 603 http://www.samsung.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com CHINA 400-810-5858 http://www.samsung.com HONG KONG (852) 3698 - 4698 http://www.samsung.com/hk http://www.samsung.com/hk_en/ INDIA 1800 1100 11 3030 8282 1800 3000 8282 1800 266 8282 http://www.samsung.com INDONESIA 0800-112-8888 021-5699-7777 http://www.samsung.com JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com PHILIPPINES 1-800-10-SAMSUNG (726-7864) for PLDT 1-800-3-SAMSUNG(726-7864) for Digitel 1-800-8-SAMSUNG(726-7864) for Globe02-5805777 http://www.samsung.com SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com THAILAND 1800-29-3232 02-689-3232 http://www.samsung.com TAIWAN 0800-329-999 0266-026-066 http://www.samsung.com VIETNAM 1 800 588 889 http://www.samsung.com MIDDLE EAST IRAN 021-8255 http://www.samsung.com OMAN 800-SAMSUNG(726-7864) http://www.samsung.com KUWAIT 183-2255 http://www.samsung.com BAHRAIN 8000-4726 http://www.samsung.com EGYPT 08000-726786 http://www.samsung.com JORDAN 800-22273 http://www.samsung.com MOROCCO 080 100 2255 http://www.samsung.com SAUDI ARABIA 9200-21230 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com AFRICA CAMEROON 7095- 0077 http://www.samsung.com COTE D’ IVOIRE 8000 0077 http://www.samsung.com GHANA 0800-10077 http://www.samsung.com 0302-200077 KENYA 0800 724 000 http://www.samsung.com NIGERIA 0800-726-7864 http://www.samsung.com SENEGAL 800-00-0077 http://www.samsung.com SOUTH AFRICA 0860-SAMSUNG(726-7864) http://www.samsung.com TANZANIA 0685 88 99 00 http://www.samsung.com UGANDA 0800 300 300 http://www.samsung.com UGANDA 0800 300 300 http://www.samsung.com © 2012 Samsung Electronics Co., Ltd. Alle Rechte vorbehalten. BN46-00196C-03 TV MONITOR A LED (MFM TV) Manuale dell'utente Grazie per aver acquistato questo prodotto Samsung. Per ricevere un'assistenza più completa, registrare il prodotto all'indirizzo www.samsung.com/register TB300 TB350Italiano 2 Le figure e le illustrazioni contenute nel presente Manuale dell'utente sono fornite esclusivamente a scopo di riferimento e possono differire dall'aspetto effettivo del prodotto. Il design e le specifiche del prodotto sono soggette a modifica senza preavviso. Avviso sulla TV digitale 1. Le funzioni connesse alla TV digitale (DVB) sono disponibili solo nei paesi o nelle zone in cui vengono trasmessi segnali digitali terrestri DVB-T (MPEG2 e MPEG4 AVC) o dove sia possibile accedere a un servizio TV via cavo DVB-C compatibile (MPEG2 e MPEG4 AAC). Verificare presso il rivenditore locale la possibilità di ricevere segnali DVB-T o DVB-C. 2. DVB-T è lo standard del consorzio europeo DVB per la trasmissione televisiva digitale terrestre, mentre DVB-C è lo standard per la trasmissione televisiva digitale via cavo. 3. Sebbene questo display a LED soddisfi i più recenti standard DVB-T e DVB-C (ad agosto 2008), non è possibile garantirne la compatibilità con future trasmissioni digitali terrestri DVB-T e digitali via cavo DVB-C. 4. A seconda del paese o della zona in cui questo display a LED viene utilizzato, alcuni fornitori di servizi TV via cavo potrebbero richiedere costi aggiuntivi per tale servizio nonché l'accettazione di specifici termini e condizioni. 5. Alcune funzioni del display a LED potrebbero non essere disponibili in determinati paesi o regioni e la modalità DVB-C potrebbe non funzionare correttamente con alcuni fornitori di servizi via cavo. 6. Per ulteriori informazioni, contattare il centro assistenza clienti Samsung della propria zona. ✎ I diversi metodi di trasmissione utilizzati nei vari paesi possono influire sulla qualità di ricezione del display a LED. Verificare le prestazioni del display a LED presso il proprio rivenditore autorizzato Samsung o un Call centre Samsung per sapere se sia possibile ottenere un miglioramento riconfigurandone le impostazioni. Avvertenza sulla visualizzazione di immagini fisse Evitare la visualizzazione sullo schermo di immagini fisse (ad esempio file di immagine jpeg) o di elementi di immagine fissi (ad esempio il logo di un programma TV, il formato panorama o 4:3, la barra dei titoli di borsa o delle notizie nella parte inferiore dello schermo e così via). La visualizzazione costante di un'immagine fissa può causare effetti fantasma che influiscono sulla qualità delle immagini. Per ridurre questo rischio, seguire i consigli riportati di seguito: • Evitare la visualizzazione dello stesso canale per lunghi periodi. • Cercare sempre di visualizzare le immagini a pieno schermo e utilizzare il menu del formato immagine del display a LED per individuare la migliore impostazione possibile. • Ridurre i valori della luminosità e del contrasto al minimo necessario per ottenere la qualità desiderata dell'immagine. Valori troppo elevati possono accelerare il processo di bruciatura. • Utilizzare spesso tutte le funzioni del display a LED progettate per ridurre la ritenzione delle immagini e la bruciatura dello schermo. Per i dettagli, consultare la relativa sezione del manuale dell'utente. Messa in sicurezza dell'area di installazione Mantenere le distanze indicate tra il prodotto e gli altri oggetti (ad esempio le pareti) per garantire una corretta ventilazione. In caso contrario, potrebbe verificarsi un incendio o un problema con il prodotto a seguito dell'aumento della temperatura interna. ✎ L'aspetto effettivo del display a LED può differire dalle immagini riportate nel presente manuale a seconda del modello. ✎ Prestare attenzione quando si tocca il display a LED. Alcune parti possono essere piuttosto calde. Installazione con piedistallo Installazione con supporto a parete • Può essere richiesto il pagamento di un diritto amministrativo se – (a) si richiede l'intervento di un tecnico, ma il prodotto non presenta alcun difetto (ovvero il presente manuale dell'utente non è stato consultato). – (b) l'unità viene portata presso un centro di riparazione, ma il prodotto non presenta alcun difetto (ovvero il presente manuale dell'utente non è stato consultato). • L'importo di tale diritto amministrativo verrà comunicato prima di qualsiasi intervento o della visita a domicilio. 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm3 ITALIANO Italiano Controllare il simbolo! Questa funzione può essere utilizzata premendo il tasto t TOOLST sul telecomando. Nota Segnala informazioni aggiuntive. Sommario Per iniziare 4 4 Precauzioni di sicurezza 11 Accessori 12 Pannello di controllo 13 Telecomando Collegamenti 14 14 Collegamento a un'antenna 14 Impostazione (impostazione iniziale) 15 Collegamento a un dispositivo AV 16 Collegamento a uno slot COMMON INTERFACE 17 Collegamento a un dispositivo audio e a un PC 19 Modifica della sorgente di ingresso Funzioni di base 19 19 Come spostarsi nei menu 20 Utilizzo del tasto INFO (guida Now & Next) 20 Utilizzo del menu Canale 22 Menu Canale 23 Menu Immagine 25 Menu Suono 27 Menu Sistema 30 Menu Supporto Funzioni avanzate 31 31 Utilizzo di Media Play Altre informazioni 38 38 Funzione Teletext dei canali analogici 39 Installazione di un supporto a parete / piedistallo da tavolo 40 Blocco Kensington antifurto 41 Risoluzione del problemi 45 Specifiche 46 Diagrammi a blocchi4 Per iniziare Italiano Precauzioni di sicurezza Icone utilizzate per le precauzioni di sicurezza AVVERTENzA La mancata osservanza delle precauzioni contrassegnate con questo simbolo può causare lesioni personali gravi o incidenti mortali. ATTENzIONE La mancata osservanza delle precauzioni contrassegnate con questo simbolo può causare lesioni personali o danni alla proprietà. Azione da non eseguire Azione da eseguire ATTENZIONE RISCHIO DI SCOSSE ELETTRICHE. NON APRIRE ATTENzIONE: PER RIDURRE IL RISCHIO DI SCOSSE ELETTRICHE, NON RIMUOVERE IL COPERCHIO (O PANNELLO POSTERIORE). ALL'INTERNO NON SONO PRESENTI PARTI RIPARABILI DALL'UTENTE. PER TUTTI GLI INTERVENTI DI ASSISTENzA, RIVOLGERSI A UN TECNICO QUALIFICATO. Questo simbolo segnala la presenza interna di alta tensione. È pericoloso contattare in qualsiasi modo le parti interne del prodotto. Questo simbolo segnala l'esistenza di documentazione importante sul funzionamento e la manutenzione, fornita insieme al prodotto. ¦ Alimentazione elettrica ✎ Le immagini che seguono sono fornite a scopo di riferimento e possono variare a seconda del modello e del paese. Avvertenza Non utilizzare un cavo di alimentazione o una spina danneggiati o una presa elettrica non salda. x In caso contrario, potrebbero verificarsi scosse elettriche o un incendio. Non collegare più apparecchi elettrici a una singola presa a muro. x In caso contrario, potrebbe verificarsi un incendio a seguito del surriscaldamento della presa. Non collegare o scollegare l'alimentazione elettrica con le mani bagnate. x In caso contrario, potrebbero verificarsi scosse elettriche. ! Inserire saldamente la spina nella presa elettrica. x In caso contrario, potrebbe verificarsi un incendio. ! Collegare il cavo di alimentazione a una presa a muro dotata di messa a terra (solo per apparecchiature con classe di isolamento 1). x In caso contrario, potrebbero verificarsi scosse elettriche o lesioni personali. Non piegare o attorcigliare eccessivamente il cavo di alimentazione e non collocare oggetti pesanti su di esso. x In caso contrario, potrebbero verificarsi scosse elettriche o un incendio a seguito del danneggiamento del cavo. Per iniziare5 Per iniziare Italiano Tenere il cavo di alimentazione e il prodotto distanti dagli apparecchi di riscaldamento. x In caso contrario, potrebbero verificarsi scosse elettriche o un incendio. ! Se sui poli della spina o sulla presa a muro è presente della polvere, rimuoverla con un panno asciutto. x In caso contrario, potrebbe verificarsi un incendio. Attenzione Non scollegare la spina mentre il prodotto è in funzione. x In caso contrario, il prodotto potrebbe danneggiarsi a causa di scosse elettriche. ! Utilizzare esclusivamente il cavo di alimentazione fornito da Samsung. Inoltre, non utilizzare il cavo di un altro apparecchio elettrico. x In caso contrario, potrebbero verificarsi scosse elettriche o un incendio. ! Quando si scollega l'alimentazione dalla presa a muro, impugnare la spina e non il cavo. x In caso contrario, potrebbero verificarsi scosse elettriche o un incendio. ! Collegare la spina a una presa a muro facilmente raggiungibile. x Se si verifica un problema con il prodotto, è necessario scollegare la spina per interrompere completamente la corrente. Non è possibile interrompere completamente la corrente agendo esclusivamente sul tasto di alimentazione del prodotto. ¦ Installazione Avvertenza Non appoggiare candele, fornelletti antizanzare e sigarette accese sul prodotto. x In caso contrario, potrebbe verificarsi un incendio. ! Per installare il prodotto sulla parete, rivolgersi a un tecnico o a un'azienda specializzata. x In caso contrario, potrebbero verificarsi lesioni personali. x Verificare che sia utilizzato il supporto a parete specificato. Non installare il prodotto in un ambiente dotato di scarsa ventilazione, ad esempio in una libreria o in un mobile. x In caso contrario, potrebbe verificarsi un incendio a seguito del surriscaldamento interno. ! Tenere i sacchetti di plastica utilizzati per l'imballaggio del prodotto lontano dalla portata dei bambini. x Se inseriti sulla testa, potrebbero causare soffocamento. Non installare il prodotto su una sede instabile o soggetta a eccessive vibrazioni, ad esempio su un ripiano malfermo o inclinato. x Il prodotto potrebbe cadere con conseguenti danni al prodotto o lesioni personali. x Se il prodotto viene utilizzato su una sede soggetta a eccessive vibrazioni, potrebbero verificarsi problemi con il prodotto o un incendio. ! Non installare il prodotto in un luogo esposto a polvere, umidità (sauna), olio, fumo o acqua (gocce di pioggia) né all'interno di un veicolo. x Potrebbero verificarsi scosse elettriche o un incendio.6 Per iniziare Italiano Non installare il prodotto in un luogo esposto alla luce solare diretta né accanto a fonti di calore, ad esempio un caminetto o un apparecchio di riscaldamento. x La durata del prodotto potrebbe ridursi o potrebbe verificarsi un incendio. Non installare il prodotto in una posizione raggiungibile dai bambini. x Se viene toccato da un bambino, il prodotto potrebbe cadere con conseguenti lesioni personali. x Poiché la parte anteriore del prodotto è più pesante, installare il prodotto su una superficie piana e stabile. ! Curvare verso il basso il cavo esterno dell'antenna nel punto in cui entra in casa in modo che l'acqua piovana non possa riversarsi internamente. x In caso di penetrazione di acqua piovana nel prodotto, potrebbero verificarsi scosse elettriche o un incendio. ! Installare l'antenna ben distante da eventuali cavi ad alta tensione. x Se l'antenna tocca o cade su un cavo ad alta tensione, potrebbero verificarsi scosse elettriche o un incendio. Attenzione ! Non lasciare cadere il prodotto durante uno spostamento. x Potrebbero verificarsi problemi con il prodotto o lesioni personali. Non appoggiare il prodotto con lo schermo rivolto verso il basso sul pavimento. x Il pannello del prodotto potrebbe danneggiarsi. Quando si installa il prodotto su una mensola o un ripiano, verificare che la parte anteriore del prodotto non sporga all'esterno della mensola o del ripiano. x In caso contrario, il prodotto potrebbe cadere con conseguenti malfunzionamenti o lesioni personali. x Utilizzare un mobile o un ripiano adatto alle dimensioni del prodotto. ! Quando si appoggia il prodotto, maneggiarlo con cautela. x In caso contrario, potrebbero verificarsi problemi con il prodotto o lesioni personali. SAMSUNG ! Se si installa il prodotto in una posizione soggetta a condizioni operative molto variabili, potrebbero verificarsi gravi problemi di qualità dovuti all'ambiente circostante. In tal caso, installare il prodotto solo dopo aver consultato a riguardo uno dei tecnici dell'assistenza Samsung. x Luoghi esposti a polveri microscopiche, sostanze chimiche, temperature troppo alte o basse, umidità elevata, aeroporti o stazioni in cui il prodotto viene utilizzato ininterrottamente.7 Per iniziare Italiano ¦ Pulizia Avvertenza ! Prima di pulire il prodotto, scollegare il cavo di alimentazione. x In caso contrario, potrebbero verificarsi scosse elettriche o un incendio. Durante la pulizia, non spruzzare acqua direttamente sulle parti del prodotto. x Assicurarsi che l'acqua non penetri nel prodotto. x In caso contrario, potrebbero verificarsi scosse elettriche, un incendio o problemi con il prodotto. Attenzione Non spruzzare detergenti direttamente sul prodotto. x Potrebbero prodursi scolorimenti o incrinature sulla parte esterna del prodotto o distacchi del pannello. ! Quando si pulisce il prodotto, scollegare il cavo di alimentazione e utilizzare il panno per la pulizia fornito in dotazione. x Quando si pulisce il prodotto, non utilizzare sostanze chimiche come cera, benzene, alcol, diluenti, fornelletti antizanzare, deodoranti, lubrificanti o detergenti.  La parte esterna potrebbe deformarsi e le etichette stampate potrebbero staccarsi. ! Se il prodotto non si pulisce con il solo panno fornito in dotazione, utilizzare un panno morbido inumidito con un detergente specifico per monitor. x Se non si dispone di un detergente specifico, prima di pulire il prodotto diluire il detergente con dell'acqua in un rapporto di 1:10. ! Poiché la superficie esterna del prodotto si graffia facilmente, utilizzare il panno per la pulizia fornito in dotazione. ¦ Utilizzo Avvertenza Data la presenza di alta tensione all'interno del prodotto, non smontare, riparare o modificare il prodotto autonomamente. x In caso contrario, potrebbero verificarsi scosse elettriche o un incendio. x Se è necessario un intervento, contattare un centro di assistenza. ! Per spostare il prodotto, spegnerlo e scollegare il cavo di alimentazione, il cavo dell'antenna e tutti gli altri cavi eventualmente collegati al prodotto. x In caso contrario, potrebbero verificarsi scosse elettriche o un incendio a seguito del danneggiamento di un cavo.8 Per iniziare Italiano ! Se il prodotto genera un rumore anomalo, odore di bruciato o fumo, scollegare immediatamente il cavo di alimentazione e contattare un centro di assistenza. x In caso contrario, potrebbero verificarsi scosse elettriche o un incendio. Non lasciare che i bambini si appendano al prodotto o vi salgano sopra. x In caso contrario, il prodotto potrebbe cadere con conseguenti lesioni personali o morte. Se si fa cadere il prodotto o la struttura esterna subisce danni, spegnere il prodotto e scollegare il cavo di alimentazione. Contattare un centro di assistenza. x In caso contrario, potrebbero verificarsi scosse elettriche o un incendio. Non appoggiare oggetti come giocattoli o biscotti sul prodotto. x Se un bambino si appende al prodotto per afferrare un oggetto, l'oggetto o il prodotto potrebbe cadere con conseguenti lesioni personali o morte. ! In caso di fulmini e temporali, scollegare il cavo di alimentazione e non toccare in alcun caso il cavo dell'antenna poiché è pericoloso. x In caso contrario, potrebbero verificarsi scosse elettriche o un incendio. ! Non far cadere oggetti sul prodotto né urtarlo. x In caso contrario, potrebbero verificarsi scosse elettriche o un incendio. Non spostare il prodotto tirandolo per il cavo di alimentazione o dell'antenna. x In caso contrario, potrebbero verificarsi scosse elettriche, un incendio o problemi con il prodotto conseguenti al danneggiamento del cavo. ! GAS Se si verifica una perdita di gas, non toccare il prodotto né la spina e ventilare immediatamente l'ambiente. x Una scintilla potrebbe provocare un'esplosione o un incendio. x In caso di fulmini e temporali, non toccare il cavo di alimentazione né il cavo dell'antenna. Non sollevare o spostare il prodotto tenendolo solo per il cavo di alimentazione o del segnale. x In caso contrario, potrebbero verificarsi scosse elettriche, un incendio o problemi con il prodotto conseguenti al danneggiamento del cavo. ! Non utilizzare o collocare spray e oggetti infiammabili vicino al prodotto. x Potrebbe verificarsi un'esplosione o un incendio. Prestare attenzione a non ostruire le aperture di ventilazione con tovaglie o tende. x In caso contrario, potrebbe verificarsi un incendio a seguito del surriscaldamento interno. 100 Non introdurre oggetti infiammabili o metallici, ad esempio bacchette, monete o forcine, nel prodotto attraverso le aperture di ventilazione, le porte e così via. x In caso di penetrazione di acqua o di altre sostanze all'interno del prodotto, spegnere il prodotto, scollegare il cavo di alimentazione e contattare un centro di assistenza. x In caso contrario, potrebbero verificarsi problemi con il prodotto, scosse elettriche o un incendio.9 Per iniziare Italiano Non appoggiare oggetti metallici o contenenti liquidi, ad esempio vasi, bevande, cosmetici o medicinali, sul prodotto. x In caso di penetrazione di acqua o di altre sostanze all'interno del prodotto, spegnere il prodotto, scollegare il cavo di alimentazione e contattare un centro di assistenza. x In caso contrario, potrebbero verificarsi problemi con il prodotto, scosse elettriche o un incendio. Non esercitare una forte pressione sul prodotto. Il prodotto potrebbe deformarsi o danneggiarsi. Attenzione ! La visualizzazione di un'immagine fissa per lungo tempo può determinare un'immagine persistente o una macchia sullo schermo. x Se non si utilizza il prodotto per lungo tempo, attivare la modalità di risparmio energia o impostare il salvaschermo sulla modalità immagine in movimento. -_- ! Se non si utilizza il prodotto per lungo tempo, ad esempio quando si esce da casa, scollegare il cavo di alimentazione dalla presa a muro. x In caso contrario, potrebbe prodursi un accumulo di polvere con conseguente incendio a seguito di un surriscaldamento o di un cortocircuito oppure potrebbero verificarsi scosse elettriche. ! Impostare la risoluzione e la frequenza appropriate per il prodotto. x In caso contrario, potrebbe verificarsi un affaticamento della vista. Non capovolgere o spostare il prodotto tenendolo per il piedistallo. x Il prodotto potrebbe cadere con conseguenti danni al prodotto o lesioni personali. ! La visione continua da una distanza troppo ravvicinata può danneggiare la vista. Non utilizzare un umidificatore o una cucina nei pressi del prodotto. x In caso contrario, potrebbero verificarsi scosse elettriche o un incendio. ! È importante far riposare gli occhi (5 minuti ogni ora) quando si guarda lo schermo del prodotto per periodi di tempo prolungati. x In questo modo si attenua l'affaticamento della vista. Poiché il pannello dello schermo diventa molto caldo quando lo si utilizza per lungo tempo, non toccare il prodotto.10 Per iniziare Italiano ! Tenere i piccoli accessori in una posizione lontana dalla portata dei bambini. ! Prestare attenzione durante la regolazione dell'angolo di visione del prodotto o dell'altezza del piedistallo. x Se si incastrano, le mani o le dita potrebbero riportare lesioni. x Se viene eccessivamente inclinato, il prodotto potrebbe cadere con conseguenti lesioni personali. Non appoggiare oggetti pesanti sul prodotto. x In caso contrario, potrebbero verificarsi problemi con il prodotto o lesioni personali. Quando si utilizzano le cuffie, non regolare il volume a un livello troppo alto. x Un audio troppo elevato potrebbe danneggiare l'udito. Prestare attenzione affinché i bambini non mettano le batterie in bocca quando vengono estratte dal telecomando. Posizionarle in un luogo che i bambini non possono raggiungere. x Se un bambino si è messo una batteria in bocca, rivolgersi immediatamente a un medico. ! Quando si sostituiscono le batterie, inserirle rispettando la corretta polarità (+, -). x In caso contrario, le batterie potrebbero danneggiarsi o causare incendio, lesioni personali o danni a seguito della fuoriuscita del liquido interno. Utilizzare solo le batterie standard specificate. Non utilizzare contemporaneamente batterie nuove e usate. x Le batterie potrebbero rompersi o perdere liquido provocando incendio, lesioni personali o contaminazione (danno). ! Le batterie (anche quelle ricaricabili) non sono normali rifiuti e devono essere consegnate presso un punto di raccolta per il riciclo. Il cliente è responsabile della consegna delle batterie usate o ricaricabili presso un punto di raccolta per il riciclo. x È possibile consegnare le batterie usate o ricaricabili presso un vicino centro di raccolta pubblico per il riciclo o presso un negozio in cui viene venduto lo stesso tipo di batteria o di batteria ricaricabile.11 Per iniziare Italiano Accessori ✎Verificare che nella confezione del display a LED siano inclusi i componenti seguenti. Se alcuni di essi risultassero mancanti, contattare il rivenditore. ✎Il colore e la forma dei componenti possono variare a seconda dei modelli. ✎I cavi non inclusi nella confezione possono essere acquistati separatamente. ✎Quando si apre la scatola, verificare che non ci siano accessori nascosti nel materiale di imballaggio. [ATTENZIONE: INSERIRE SALDAMENTE I COMPONENTI IN MODO CHE NON POSSANO SCOLLEGARSI. x Manuale dell'utente x Guida di installazione rapida x Telecomando e batterie (2 di tipo AAA) x Panno per la pulizia x Garanzia / Guida per la sicurezza (non disponibile in alcuni paesi) x Cavo di alimentazione y Connettore del piedistallo y Base del piedistallo y Cavo D-Sub y Cavo stereo Cavi di ingresso (venduti separatamente) y Cavo HDMI-DVI y Cavo audio y Cavo component y Cavo ottico y Cavo HDMI12 Per iniziare Italiano Pannello di controllo ✎Il colore e la forma del prodotto può variare a seconda del modello. SOURCE E Alterna tutte le sorgenti di ingresso disponibili. Nel menu OSD, utilizzare questo tasto nello stesso modo in cui si utilizza il tasto ENTERE del telecomando. MENU Consente di visualizzare il menu OSD (menu a schermo) delle funzioni del display a LED. Y Regola il volume. Nel menu OSD, utilizzare i tasti Y nello stesso modo in cui si z utilizzano i tasti l e r del telecomando. Cambia i canali. Nel menu OSD, utilizzare i tasti z nello stesso modo in cui si utilizzano i tasti u e d del telecomando. P (alimentazione) Accende o spegne il display a LED. Indicatore di alimentazione Lampeggia e quindi si spegne quando l'alimentazione viene attivata. Resta acceso in modalità standby. Sensore del telecomando Puntare il telecomando in direzione di questo punto del display a LED. Modalità standby Non lasciare il display a LED in modalità standby per lunghi periodi di tempo (ad esempio quando si va in vacanza). Anche se spento con il tasto di alimentazione, il prodotto consuma comunque una ridotta quantità di energia elettrica. Si consiglia quindi di scollegare il cavo di alimentazione. Pannello di controllo13 Per iniziare Italiano Telecomando ✎Questo telecomando speciale per utenti con problemi di vista è dotato di punti Braille sui tasti numerici e dei canali. Inserimento delle batterie (formato: AAA) Accende e spegne il televisore. Consentono di accedere direttamente ai canali. Seleziona alternativamente le modalità Teletext ON, Double, Mix o OFF. Visualizza la Pag inz contenuti, in cui sono incluse le opzioni Elenco canali, Guida, Media Play, Gest. pianificazione e Sorgente. Consente di selezionare rapidamente le funzioni utilizzate con maggiore frequenza. Visualizza il menu OSD principale. Riporta la visualizzazione al menu precedente. PIP: consente di attivare o disattivare la funzione PIP. P.SIZE: consente di selezionare il Formato immagine. AD/SUBT.: consente di attivare e disattivare la descrizione audio (non disponibile in alcuni paesi) e di visualizzare i sottotitoli digitali. Consentono di spostare il cursore e selezionare un elemento, nonché di confermare l'impostazione. Utilizzare questi tasti in base alle indicazioni sullo schermo. Regola il volume. Visualizza e consente di selezionare le sorgenti video disponibili. Riporta la visualizzazione al canale precedente. Esclude temporaneamente l'audio. Visualizza l'elenco dei canali sullo schermo. Visualizza la EPG (Electronic Programme Guide). Visualizza le informazioni sullo schermo del televisore. Chiude il menu. Utilizzare questi tasti in modalità Media Play. Cambia i canali.Italiano 14 Collegamenti Collegamento a un'antenna Alla prima accensione del display a LED, vengono visualizzate automaticamente le impostazioni di base. ✎Predisporre il collegamento all'alimentazione di rete e all'antenna. ANT OUT Ingresso alimentazione Impostazione (impostazione iniziale) Alla prima accensione del display a LED, la configurazione delle impostazioni di base viene guidata da una sequenza di schermate. Premere il tasto POWERP. Impostazione è disponibile solamente quando la Sorgente di ingresso è impostata su TV. ✎Prima di accendere il display a LED, verificare che il cavo dell'antenna sia collegato. 1 Selezione della lingua del menu Premere il tasto u o d per selezionare una lingua. Al termine, premere due 2 o Selezione di Uso domestico Demo Negozio volte il tasto Premere il tasto x Selezionare la modalità ENTER u o E d . , quindi premere il tasto Uso domestico. La modalità ENTERE Demo Negozio . è P destinata agli ambienti commerciali. x Per riportare le impostazioni dell'unità da Store Demo a Uso domestico (standard): premere il tasto del volume sul display a LED. Quando viene visualizzato il menu OSD del volume, tenere premuto il tasto MENU per 5 secondi. x Store Demo è una modalità destinata solo a un uso commerciale. Se selezionata, non sarà possibile utilizzare varie funzioni. Se l'apparecchio viene utilizzato in un ambiente domestico, selezionare Uso domestico. 3 Selezione di un'area Premere il tasto ENTERE. Selezionare l'area appropriata premendo il tasto u o d. Premere il tasto ENTERE per confermare l'impostazione. 4 Sintonizzazione automatica Premere il tasto u o d per selezionare l'opzione appropriata, quindi premere due volte il tasto ENTERE. x Utilizzo un cavo aereo. Verranno memorizzati tutti canali disponibili mediante un cavo RF. (Sintonizzazione automatica richiesta.) x Utilizzo un servizio via cavo o via satellite. Non è necessario utilizzare Sintonizzazione automatica per trovare i canali. ✎ È possibile completare la configurazione di Impostazione selezionando la relativa opzione. x Antenna / Cavo: selezionare l'antenna da memorizzare. Digitale & Analogico / Digitale / Analogico: selezionare il tipo di canali da memorizzare. ✎ Ulteriori dettagli sono disponibili a pagina 22. 5 Impostazione della Modalità orologio Impostare automaticamente o manualmente la Modalità orologio. x Auto: consente di selezionare il proprio fuso orario (in base alla nazione). x Manuale: consente di impostare manualmente la data e l'ora correnti. ✎ Se è stata selezionata l'opzione “Utilizzo un servizio via cavo o via satellite.” al passo 4, l'orologio può essere impostato manualmente. 6 completata Premere il tasto ENTERE. Per reimpostare questa funzione... Selezionare Sistema - Impostazione (impostazione iniziale). Immettere il PIN personale a 4 cifre. Il PIN predefinito è "0-0-0-0". Per cambiarlo, utilizzare la funzione Cambia PIN. È necessario eseguire nuovamente la funzione Impostazione (MENU → Sistema) a casa anche se è stata eseguita in negozio. ✎Se si dimentica il codice PIN, per ripristinare il PIN su "0-0-0-0" premere i tasti del telecomando nella sequenza riportata di seguito in modalità standby: POWER (spegnimento) → MUTE → 8 → 2 → 4 → POWER (accensione).Italiano 15 Collegamenti Collegamento a un dispositivo AV Utilizzo di un cavo HDMI o HDMI-DVI (fino a 1080p) Dispositivi disponibili: lettore DVD, lettore Blu-ray, ricevitore via cavo HD, ricevitore satellitare HD STB (set-top box), videoregistratore VCR ✎HDMI IN(DVI) / PC / DVI AUDIO IN x Se alla porta HDMI IN(DVI) viene collegato un cavo HDMI-DVI, l'audio non funziona. x Se il display a LED viene collegato un dispositivo esterno che utilizza una versione HDMI precedente, l'immagine potrebbe non essere visualizzata correttamente o non essere visualizzata affatto oppure l'audio potrebbe non funzionare. Se si verifica un problema di questo tipo, informarsi presso il produttore del dispositivo esterno circa la versione HDMI e, se obsoleta, richiederne l'aggiornamento. x Acquistare un cavo HDMI certificato. In caso contrario, l'immagine potrebbe non essere visualizzata o potrebbe verificarsi un errore di collegamento. x Si consiglia di utilizzare un cavo HDMI ad alta velocità di base o uno con funzione Ethernet. Questo prodotto non supporta la funzione Ethernet tramite HDMI. Utilizzo di un cavo SCART Dispositivi disponibili: lettore DVD, videoregistratore VCR ✎In modalità Est., l'uscita DTV supporta solo video e audio SD MPEG. DVI OUT HDMI OUT AUDIO OUT W R Lettore DVD / Blu-ray Lettore DVD / Blu-ray EXT (RGB) EXT Videoregistratore VCR / lettore DVDItaliano 16 Collegamenti Utilizzo di un cavo component (fino a 1080p) o audio / video (solo 480i) Dispositivi disponibili: lettore DVD, lettore Blu-ray, ricevitore via cavo, ricevitore satellitare STB, videoregistratore VCR PR PB COMPONENT / AV IN R W R AUDIO OUT R-AUDIO-L VIDEO OUT R W R B G R W R B G R W W W R B R R G Y Y AUDIO OUT R-AUDIO-L COMPONENT OUT PR PB Y R W Y ✎Quando si esegue il collegamento ad AV IN, il colore del connettore AV IN [Y/VIDEO] (verde) non corrisponderà a quello del cavo video (giallo). ✎Per una migliore qualità dell'immagine, si consiglia il collegamento del cavo component sul collegamento A/V. Collegamento a uno slot COMMON INTERFACE (solo per Europa, Turchia, Algeria, Sud Africa e area CIS) Utilizzo della scheda CI o CI+ Per la visione di canali a pagamento, è necessario inserire la scheda CI o CI+. x In assenza della scheda CI o CI+, per alcuni canali verrà visualizzato il messaggio di segnale criptato. x Le informazioni di associazione contenenti un numero di telefono, l'ID della scheda CI o CI+, l'ID dell'host ed altri dati verranno visualizzate entro 2-3 minuti circa. Se viene visualizzato un messaggio di errore, contattare il fornitore del servizio. x Al termine della configurazione delle informazioni sui canali, viene visualizzato il messaggio "Aggiornamento completato" a indicare che l'elenco canali è stato aggiornato. ✎NOTA x È necessario procurarsi una scheda CI o CI+ presso un fornitore di servizi locale. x Quando si rimuove la scheda CI o CI+, estrarla con le mani facendo molta attenzione, poiché cadendo potrebbe danneggiarsi. x Inserire la scheda CI o CI+ nella direzione indicata sulla scheda stessa. x La posizione dello slot COMMON INTERFACE potrebbe essere diversa a seconda del modello. x La scheda CI o CI+ non è supportata in alcuni paesi e regioni; verificare presso il proprio rivenditore autorizzato. x In caso di problemi, contattare il fornitore del servizio. x Inserire una scheda CI o CI+ in grado di supportare le impostazioni di antenna correnti. In caso contrario, la schermata apparirà distorta o non verrà visualizzata. Cavo audio (non fornito) Cavo video (non fornito) Cavo audio (non fornito) Rosso Bianco Rosso Blu Verde Rosso Bianco Giallo Dispositivo Dispositivo Cavo component (non fornito)Italiano 17 Collegamenti Collegamento a un dispositivo audio e a un PC Utilizzo di un collegamento ottico (digitale) o cuffie DIGITAL AUDIO OUT (OPTICAL) Gli apparecchi della serie TB300 non dispongono di un'interfaccia ottica e per le cuffie. ✎DIGITAL AUDIO OUT (OPTICAL) x Quando si collega un sistema audio digitale al connettore DIGITAL AUDIO OUT (OPTICAL), ridurre il volume sia del display a LED sia del sistema audio. x L'audio a 5.1 canali è disponibile quando il display a LED è collegato a un dispositivo esterno che supporta lo standard 5.1 CH. x Se il ricevitore (Home Theater) è impostato su On, è possibile ascoltare l'audio proveniente dall'uscita ottica del televisore. Quando il televisore riceve un segnale DTV, invia l'audio a 5.1 canali al ricevitore Home Theater. Se la sorgente è un dispositivo digitale, ad esempio un lettore DVD / Blu-ray o un ricevitore via cavo / satellitare STB (set-top box), ed è collegata al televisore mediante HDMI, sarà possibile ascoltare dal ricevitore Home Theater solo audio a 2 canali. Per ascoltare l'audio a 5.1 canali, collegare il connettore di uscita audio digitale del lettore DVD / Blu-ray o del ricevitore via cavo / satellitare STB direttamente a un amplificatore o all'Home Theater. ✎Cuffie H: è possibile collegare le cuffie all'apposita uscita dell'apparecchio. Quando le cuffie sono collegate, l'audio degli altoparlanti incorporati viene disabilitato. x Quando si collegano le cuffie al display a LED, la funzione audio potrebbe risultare limitata. x Il volume delle cuffie e quello del display a LED sono regolabili separatamente. Utilizzo di un cavo HDMI, HDMI-DVI o D-sub ✎A seconda del PC, il collegamento mediante cavo HDMI potrebbe non essere supportato. Sistema audio digitale Cavo HDMI (non fornito) HDMI-DVI (non fornito) Cavo stereo Cavo stereo Cavo D-Sub Italiano 18 Collegamenti Modalità di visualizzazione (ingresso D-Sub e HDMI / DVI) Risoluzione ottimale: 1366 x 768 pixel (solo modello T19B300) Modalità di visualizzazione Frequenza orizzontale (kHz) Frequenza verticale (kHz) Frequenza di clock pixel (MHz) Polarità di sincronizzazione (O/V) Modalità Risoluzione IBM 720 x 400 70Hz 31,469 70,087 28.322 -/+ VESA DMT 640 x 480 60Hz 31,469 59,940 25.175 -/- MAC 640 x 480 67Hz 35,000 66,667 30.240 -/- VESA DMT 640 x 480 72Hz 37,861 72,809 31.500 -/- VESA DMT 640 x 480 75Hz 37,500 75,000 31.500 -/- VESA DMT 800 x 600 60Hz 37,879 60,317 40.000 +/+ VESA DMT 800 x 600 72Hz 48,077 72,188 50.000 +/+ VESA DMT 800 x 600 75Hz 46,875 75,000 49.500 +/+ MAC 832 x 624 75Hz 49,726 74,551 57.284 -/- VESA DMT 1024 x 768 60Hz 48,363 60,004 65.000 -/- VESA DMT 1024 x 768 70Hz 56,476 70,069 75.000 -/- VESA DMT 1024 x 768 75Hz 60,023 75,029 78.750 +/+ VESA DMT 1280 x 720 60Hz 45,000 60,000 74.250 +/+ VESA DMT 1366 x 768 60Hz 47,712 59,790 85.500 +/+ Risoluzione ottimale: 1920 x 1080 pixel Modalità di visualizzazione Frequenza orizzontale (kHz) Frequenza verticale (kHz) Frequenza di clock pixel (MHz) Polarità di sincronizzazione (O/V) Modalità Risoluzione IBM 720 x 400 70Hz 31,469 70,087 28,322 -/+ VESA DMT 640 x 480 60Hz 31,469 59,940 25,175 -/- MAC 640 x 480 67Hz 35,000 66,667 30,240 -/- VESA DMT 640 x 480 72Hz 37,861 72,809 31,500 -/- VESA DMT 640 x 480 75Hz 37,500 75,000 31,500 -/- VESA DMT 800 x 600 60Hz 37,879 60,317 40,000 +/+ VESA DMT 800 x 600 72Hz 48,077 72,188 50,000 +/+ VESA DMT 800 x 600 75Hz 46,875 75,000 49,500 +/+ MAC 832 x 624 75Hz 49,726 74,551 57,284 -/- VESA DMT 1024 x 768 60Hz 48,363 60,004 65,000 -/- VESA DMT 1024 x 768 70Hz 56,476 70,069 75,000 -/- VESA DMT 1024 x 768 75Hz 60,023 75,029 78,750 +/+ VESA DMT 1152 x 864 75Hz 67,500 75,000 108,000 +/+ MAC 1152 x 870 75Hz 68,681 75,062 100,000 -/- VESA DMT 1280 x 720 60Hz 45,000 60,000 74,250 +/+ VESA DMT 1280 x 800 60Hz 49,702 59,810 83,500 -/+ VESA DMT 1280 x 1024 60Hz 63,981 60,020 108,000 +/+ VESA DMT 1280 x 1024 75Hz 79,976 75,025 135,000 +/+ VESA DMT 1366 x 768 60Hz 47,712 59,790 85,500 +/+ VESA DMT 1440 x 900 60Hz 55,935 59,887 106,500 -/+ VESA DMT 1600 x 900RB 60Hz 60,000 60,000 108,000 +/+ VESA DMT 1680 x 1050 60Hz 65,290 59,954 146,250 -/+ VESA DMT 1920 x 1080 60Hz 67,500 60,000 148,500 +/+ ✎NOTA x La modalità interlacciata non è supportata. x L'apparecchio potrebbe funzionare in modo anomalo se si seleziona un formato video non standard. x Le modalità Separate e Composite sono supportate. La funzione SOG (Sync On Green) non è supportata.Italiano 19 Collegamenti Funzioni di base Come spostarsi nei menu Prima di utilizzare il display a LED, eseguire i passaggi descritti più avanti per imparare come spostarsi nei menu e quindi selezionare e regolare le varie funzioni. 1 Tasti ENTERE / di direzione: Consentono di spostare il cursore e selezionare un elemento, nonché di confermare l'impostazione. 2 Tasto RETURN: Riporta la visualizzazione al menu precedente. 3 Tasto MENU: Visualizza il menu OSD principale. 4 Tasto EXIT: chiude il menu OSD. Utilizzo del menu OSD (On Screen Display) La procedura di accesso può variare a seconda del menu selezionato. 1 MENU m Sullo schermo vengono visualizzate le opzioni del menu principale: Immagine, Suono, Canale, Sistema, Supporto. 2 ▲ / ▼ Selezionare un'icona con il tasto ▲ o ▼. 3 ENTERE Premere ENTERE per accedere al sottomenu. 4 ▲ / ▼ Selezionare il sottomenu desiderato con il tasto ▲ o ▼. 5 ◄ / ► Regolare il valore di una voce con il tasto ◄ o ►. La regolazione nel menu OSD può variare a seconda del menu selezionato. 6 ENTERE Premere ENTERE per completare la configurazione. 7 EXIT e Premere EXIT. Modifica della sorgente di ingresso Sorgente SOURCE s→ Sorgente Consente di selezionare il display a LED o una sorgente di ingresso esterna, ad esempio un lettore DVD / Blu-ray o un ricevitore via cavo / satellitare STB. ■ TV / Est. / PC / HDMI / DVI / AV / Comp. ✎Nella schermata Sorgente, gli ingressi collegati appaiono evidenziati. ✎TV, PC ed Est. sono sempre attivati. Modifica Nome SOURCEs→ TOOLST→ Modifica Nome → ENTERE In Sorgente, premere il tasto TOOLST, quindi impostare le sorgente di ingresso esterna desiderata. ■ VCR / DVD / STB cavo / STB satellite / STB PVR / Ricevitore AV / Giochi / Videocamera / PC / DVI PC / Dispositivi DVI / TV / IPTV / Blu-ray / HD DVD / DMA: indicare i dispositivi collegati ai connettori di ingresso per selezionare più facilmente la sorgente di ingresso. ✎Quando si collega un PC alla porta HDMI IN (DVI) mediante un cavo, è necessario impostare il display a LED sulla modalità DVI PC in Modifica Nome. ✎Quando si collega un PC alla porta HDMI IN (DVI) mediante un cavo HDMI-DVI, è necessario impostare il display a LED sulla modalità DVI PC in Modifica Nome. ✎Quando si collegano dispositivi AV alla porta HDMI IN (DVI) mediante un cavo HDMI-DVI, è necessario impostare il display a LED sulla modalità Dispositivi DVI in Modifica Nome. Informazioni SOURCEs→ TOOLST→ Informazioni → ENTERE Visualizza informazioni dettagliate sul dispositivo esterno selezionato. 2 4 3 1Italiano 20 Funzioni di base Utilizzo del tasto INFO (guida Now & Next) Sul display viene visualizzato il canale corrente e lo stato di determinate impostazioni audio e video. La guida Now & Next riporta le informazioni sui programmi giornalieri di ogni canale in base all'orario di trasmissione. x Scorrere con i tasti l / r per visualizzare le informazioni relative a un programma desiderato durante la visione del canale corrente (in base ai canali). x Scorrere con i tasti u / d per visualizzare le informazioni relative ad altri canali. Se si desidera passare al canale selezionato, premere il tasto ENTERE. • L'immagine visualizzata può variare a seconda del modello. Nessuna informazione dettagliata. Nessun titolo 576i 4:3 SD Italiano Stereo a Informazioni 17.02 Mar 19 Lug DTV Air Tutto Coming Soon 5 Utilizzo del menu Canale Premere il tasto CONTENT per selezionare Pag inz contenuti, quindi selezionare il menu desiderato. Verrà visualizzata la relativa schermata. • L'immagine visualizzata può variare a seconda del modello. Pag inz contenuti Elenco canali Guida Media Play Gest. pianificazione Sorgente R Ritorna Guida CONTENT → Pag inz contenuti → Guida → ENTERE Le informazioni della guida EPG (Electronic Programme Guide) vengono fornite dalle emittenti. Utilizzando i palinsesti forniti dalle emittenti, è possibile specificare in anticipo i programmi che si desidera guardare in modo da passare automaticamente al relativo canale al determinato orario. A seconda dello stato del canale, è possibile che le voci dei programmi appaiano vuote o non aggiornate. Utilizzo di Vis. canali x a Rosso (Sche. Mgr): visualizza la funzione Gest. pianificazione. x b Verde (- 24 ore): visualizza l'elenco dei programmi che verranno trasmessi entro 24 ore. x { Giallo (+24 ore): visualizza l'elenco dei programmi che verranno trasmessi dopo 24 ore. x } Blu (Mod. CH): consente di selezionare il tipo di canali da visualizzare nella finestra Vis. canali. x (Informazioni): visualizza i dettagli del programma selezionato. x k (Pagina): sposta la visualizzazione alla pagina precedente o successiva. x E (Guarda / Programmazione) – Quando si seleziona un programma in onda, è possibile guardarlo. – Quando si seleziona un programma che andrà in onda in futuro, è possibile prenotarne la visione. Per annullare la programmazione, premere di nuovo il tasto ENTERE e selezionare Annulla progr. Gest. pianificazione CONTENT → Pag inz contenuti → Gest. pianificazione → ENTERE Consente di visualizzare, modificare o eliminare un canale prenotato per la visione. Utilizzo di Pianifica visione È possibile impostare un canale da visualizzare automaticamente all'ora prevista. Per utilizzare questa funzione, è necessario impostare prima l'ora corrente. 1. Premere il tasto ENTERE per selezionare Gest. pianificazione. 2. Premere il tasto TOOLSTTasto o il tasto a per aggiungere manualmente il programma alla programmazione. Viene visualizzata la schermata Visione programmazione. 3. Premere i tasti u / d / l / r per impostare le opzioni Antenna, Canale, Ripetizione, Data o Ora inizio. • L'immagine visualizzata può variare a seconda del modello. IL MEDICO E LO STREGONE DTV Air 6 R4 DTT 16:55 - 17:55 IL MEDICO E LO STREGONE - 2 TEMPO a Sche. Mgr b - 24 ore { +24 ore } Mod. CH Informazioni k Pagina E Guarda Oggi 17:00 17:30 18:00 18:30 Guida 17.00 Mar 19 Lug Vis. canali - Tutto Nessuna informazione. Nessuna informazione. Nessuna informazione. Nessuna informazione. IL MEDICO E LO STREGONE 1 1futech 2 24ore.tv 3 BBC World 4 Class News 5 Coming Soon 6 R4 DTT Nessuna informazione. TG 4 Nessuna informazione. 5 Coming SoonItaliano 21 Funzioni di base x Antenna: selezionare l'antenna desiderata. x Canale: selezionare il canale desiderato. x Ripetizione: selezionare 1 volta, Manuale, Sab~Dom, Lun~Ven o Ogni gg in base alle proprie esigenze. Se si seleziona Manuale, è possibile impostare il giorno desiderato. ✎ Il segno c indica che il giorno è stato selezionato. x Data: consente di impostare la data desiderata. ✎ Questa opzione è disponibile quando si seleziona 1 volta in Ripetizione. x Ora inizio: consente di impostare l'ora di inizio desiderata. ✎ Nella schermata Informazioni è possibile modificare o annullare i programmi prenotati. x Annulla progr: consente di annullare un programma di cui era stata prenotata la visione. x Modifica: consente di modificare un programma di cui era stata prenotata la visione. x Ritorna: riporta la visualizzazione alla schermata precedente. Elenco canali CONTENT → Elenco canali → ENTERE Consente di visualizzare tutti i canali individuati. • L'immagine visualizzata può variare a seconda del modello. Elenco canali Tutto 1 1futech 2 24ore.tv 3 BBC World 4 Class News 5 Coming Soon 6 R4 DTT IL MEDICO E LO STREGONE a1 C2 a2 C4 T Strumenti L Mod. CH E Guarda k Pagina ✎Premendo il tasto CH LIST sul telecomando, verrà visualizzata immediatamente la schermata Elenco canali. Utilizzo dei pulsanti operativi con Elenco canali ■ T (Strumenti): selezionare Strumenti per impostare le funzioni seguenti. x Vis. Program: premere i tasti u / d per selezionare il programma desiderato, quindi premere il tasto ENTERE. (Solo per i canali DIGITALI) x Modifica pref.: è possibile impostare come preferiti i canali guardati con maggiore frequenza. ✎ Selezionare Modifica pref., quindi premere il tasto ENTERE. – Se il canale è già stato aggiunto all'elenco dei preferiti, verrà visualizzato Modifica pref.. x Blocco / Sblocco: consente di bloccare un canale in modo che non sia possibile selezionarlo e guardarne i programmi. ✎ Questa funzione è disponibile solo quando il Blocco canali è impostato su On. ✎ Viene visualizzata la schermata per l'immissione del PIN. Immettere il PIN personale a 4 cifre. Il PIN predefinito è "0-0-0-0". Per cambiarlo, utilizzare l'opzione Cambia PIN. x Modifca nome canale (solo canali analogici): Assegnare il nome preferito al canale. ✎ Questa funzione potrebbe non essere supportata in base alla regione di appartenenza. x Modifica numero canale: consente di modificare il numero premendo i tasti numerati desiderati. ✎ Questa funzione potrebbe non essere supportata a seconda della regione. x Elimina: è possibile eliminare un canale in modo da visualizzare solo i canali desiderati. x Informazioni: visualizza il nome del canale, la risoluzione, la modalità immagine, la lingua e così via (alcune informazioni sono disponibili solo per DTV). x Ordina: consente di modificare l'ordine dell'elenco in base al nome o al numero dei canali. (Solo per i canali DIGITALI) x Cambia antenna: consente di passare l'impostazione ad Antenna o Cavo. x Mod. modifica: consente di selezionare i canali desiderati e modificarli. ■ l r (Mod. CH): consente di passare alla selezione del tipo di canali da visualizzare nella schermata Elenco canali. ✎ L'opzione può variare a seconda della nazione. ■ E (Guarda / Informazioni): consente di guardare il canale selezionato / visualizzare i dettagli del programma selezionato. ■ k (Pagina): sposta la visualizzazione alla pagina precedente o successiva. Utilizzo di Pianifica visione in Elenco canali (in base ai canali) Quando si imposta Visione programmazione in Elenco canali, è possibile impostare il programma solo in Vis. Program. 1. Premere il tasto CH LIST, quindi selezionare il canale digitale desiderato. 2. Premere il tasto TOOLST, quindi selezionare Vis. Program. 3. Premere i tasti u / d per selezionare il programma desiderato, quindi premere il tasto E (Informazioni). 4. Selezionare Visione programmazione, quindi premere il tasto ENTERE al termine. ✎Se si desidera annullare Visione programmazione, eseguire i passi da 1 a 3, quindi selezionare Annulla progr.Italiano 22 Funzioni di base Menu Canale ¦ Risintonizzazione dei canali MENUm→ Canale → ENTERE Prima che il televisore possa iniziare la memorizzazione dei Antenna (Antenna / Cavo)t canali disponibili, è necessario specificare il tipo della sorgente del segnale collegata al display a LED. Nazione (in base alla nazione) Viene visualizzata la schermata per l'immissione del PIN. Immettere il PIN personale a 4 cifre. ✎Selezionare la propria nazione in modo che il display a LED possa eseguire correttamente la sintonizzazione automatica dei canali televisivi. ■ Canale digitale: consente di cambiare la nazione per i canali digitali. ■ Canale analogico: consente di cambiare la nazione per i canali analogici. Sintonizzazione automatica (in base alla nazione) ✎I numeri dei programmi assegnati automaticamente potrebbero non corrispondere ai numeri effettivi o desiderati. Se un canale è stato bloccato mediante la funzione Blocco canali, viene visualizzata la finestra per l'immissione del PIN. ■ Sintonizzazione automatica – Antenna / Cavo: selezionare l'antenna da memorizzare. Digitale & Analogico / Digitale / Analogico: selezionare il tipo di canali da memorizzare. ✎ Quando si seleziona Cavo → Digitale & Analogico o Digitale, specificare un'opzione per la ricerca dei canali via cavo. x Modalità ricerca (Completa / Rete / Rapida): Selezionare l'impostazione Modalità ricerca fra Completa / Rete / Rapida. x Rete (Auto / Manuale): consente di selezionare la modalità di impostazione dell'ID rete tra Auto o Manuale. x ID rete: se Rete è impostata su Manuale, è possibile impostare l'ID rete mediante i tasti numerici. x Frequenza: visualizza la frequenza del canale (varia in ogni nazione). x Modulazione: visualizza tutti i valori di modulazione disponibili. x Symbol Rate: visualizza tutti i valori di symbol rate disponibili. ■ Opzione ricerca via cavo (in base alla nazione) Consente di impostare opzioni di ricerca aggiuntive, ad esempio frequenza e symbol rate, per la ricerca di reti via cavo. – Frequenza inizio / Frequenza arresto: consentono di impostare la frequenza di inizio e la frequenza di arresto (variano in ogni nazione). – Symbol Rate: visualizza tutti i valori di symbol rate disponibili. – Modulazione: visualizza tutti i valori di modulazione disponibili. Sintonia manuale Consente di ricercare manualmente un canale e di memorizzarlo nel display a LED. ✎Se un canale è stato bloccato mediante la funzione Blocco canali, viene visualizzata la finestra per l'immissione del PIN. ■ Sintonizzazione canale digitale: consente di ricercare un canale digitale. 1. Premere il tasto ENTERE per selezionare Nuovo. ✎ Quando si seleziona Antenna → Antenna: Canale, Frequenza, Larg. di banda ✎ Quando si seleziona Antenna → Cavo: Frequenza, Modulazione, Symbol rate 2. Premere il tasto d per selezionare Ricerca. Al termine della ricerca, il canale viene aggiornato nell'elenco canali. ■ Sintonizzazione canale analogico: consente di ricercare un canale analogico. 1. Premere il tasto ENTERE per selezionare Nuovo. 2. Impostare le opzioni Programma, Sistema colore, Sistema audio, Canale e Ricerca. 3. Premere il tasto d per selezionare Memorizza. Al termine della ricerca, il canale viene aggiornato nell'elenco canali. Trasferimento elenco canali Viene visualizzata la schermata per l'immissione del PIN. Immettere il PIN personale a 4 cifre. Questa funzione consente di importare o esportare la mappa dei canali. Per poterla utilizzare, è necessario collegare un dispositivo di memoria USB. ■ Importa da USB: importa l'elenco dei canali dal dispositivo USB. ■ Esporta in USB: esporta l'elenco dei canali nel dispositivo USB. Questa funzione è disponibile quando è collegato un dispositivo USB. ✎Il formato USB deve essere FAT32. Sintonia fine (solo canali analogici) Se la ricezione è nitida, non è necessario eseguire la sintonia fine del canale, poiché avviene automaticamente durante l'operazione di ricerca e memorizzazione. Se il segnale è debole o distorto, eseguire manualmente la sintonia fine del canale. Scorrere verso sinistra o verso destra fino a quando l'immagine non risulta nitida. ✎Le impostazioni vengono applicate al canale che si sta guardando. ✎I canali sottoposti a sintonia fine e salvati vengono contrassegnati con un asterisco "*" a destra del relativo numero nel banner dei canali. ✎Per reimpostare la sintonia fine, selezionare Reset.Italiano 23 Funzioni di base Menu Immagine ¦ Modifica della modalità immagine preimpostata MENUm→ Immagine → Modalità immagine → ENTERE Consente di selezionare il tipo di immagine preferita. Modalità immaginet ✎Se si collega un PC, in Modalità immagine sono disponibili solo le opzioni Standard ed Entertainment. ■ Dinamica: adatta per un ambiente luminoso. ■ Standard: adatta per un ambiente a luminosità normale. ■ Film: adatta per la visione di film in un ambiente oscuro. ■ Entertainment: adatta per la visione di film e per i giochi. ✎ Disponibile solo quando si collega un PC. ¦ Regolazione delle impostazioni dell'immagine MENUm→ Immagine → ENTERE Samsung MagicAngle Consente di regolare l'angolo di visione dello schermo in modo da ottimizzarne la qualità in base alla posizione di chi guarda. ■ Samsung MagicAngle: quando si guarda lo schermo da un'angolazione alta o bassa, impostando la modalità appropriata per ogni posizione è possibile ottenere una qualità dell'immagine analoga a quella della visione frontale. x Off: selezionare questa opzione quando si guarda lo schermo da una posizione frontale. x Modalità comoda: selezionare questa opzione quando si guarda lo schermo da una posizione leggermente più bassa. x Modalità in piedi: selezionare questa opzione quando si guarda lo schermo da una posizione più alta. ■ Modalità: consente di regolare l'angolo di visione dello schermo. ✎Se Samsung MagicAngle è impostato su Modalità comoda o Modalità in piedi, l'opzione Gamma non è disponibile. Retroillumin / Contrasto / Luminosità / Nitidezza / Colore / Tinta (V / R) Il televisore è dotato di varie opzioni per il controllo della qualità dell'immagine. ✎NOTA x Nelle modalità analogiche TV, PC, AV del sistema PAL, la funzione Tinta (V / R) non è disponibile. x Quando si collega un PC, è possibile modificare solo i valori di Retroillumin, Contrasto, Luminosità e Nitidezza. x È possibile regolare e memorizzare le impostazioni per ogni dispositivo esterno collegato al display a LED. x Riducendo la luminosità dell'immagine si riduce il consumo di energia. Regolazione schermo ■ Formato immagine: il ricevitore via cavo / satellitare potrebbe disporre di una propria serie di formati; è tuttavia consigliabile utilizzare in genere la modalità 16:9. Auto Wide: regola automaticamente il formato immagine sulle proporzioni 16:9. 16:9: imposta l'immagine sulla modalità 16:9. Wide Zoom: ingrandisce il formato immagine a più di 4:3. ✎ Regolare la Posizione mediante i tasti u / d. Zoom: ingrandisce verticalmente le immagini in formato 16:9 per adattarle alle dimensioni dello schermo. ✎ Regolare lo Zoom o la Posizione mediante i tasti u / d. 4:3: imposta l'immagine sulla modalità di base (4:3). ✎ Non utilizzare a lungo il formato 4:3. Le tracce dei bordi visualizzati a sinistra, a destra e al centro dello schermo possono causare fenomeni di ritenzione delle immagini (bruciature dello schermo), che non sono coperti dalla garanzia. Adatta a schermo: visualizza l'immagine completa senza tagli in caso di ingresso di segnali in modalità HDMI (720p / 1080i / 1080p) o Comp. (720p / 1080i / 1080p). ✎ Regolare la Posizione mediante i tasti u / d / l / r. ✎NOTA x Le opzioni del formato immagine possono variare a seconda della sorgente di ingresso. x Le voci disponibili possono variare a seconda della modalità selezionata. x Quando si collega un PC, è possibile regolare solo le modalità 16:9 e 4:3. x È possibile regolare e memorizzare le impostazioni per ogni dispositivo esterno collegato a un ingresso del display a LED. x Se si utilizza la funzione Adatta a schermo con un ingresso HDMI 720p, verrà tagliata una riga in alto, in basso, a sinistra e a destra come nella funzione di overscan. ■ Zoom / Posizione : è possibile regolare il formato e la posizione dell'immagine mediante i tasti u / d / l / r. ✎ È disponibile solamente quando il formato dell'immagine è impostato su Zoom e Wide Zoom. ✎ In modalità Wide Zoom, è possibile utilizzare solamente la regolazione della posizione. ✎ Reset: consente di ripristinare le impostazioni predefinite per Zoom e Posizione. ■ Dimens schermo 4:3 (16:9 / Wide Zoom / Zoom / 4:3): disponibile solo quando il formato immagine è impostato su Auto Wide. È possibile determinare il formato immagine desiderato nella dimensione 4:3 WSS (Wide Screen Service) o nella dimensione originale. Ogni nazione europea richiede un formato immagine diverso. ✎ Non disponibile nelle modalità HDMI, Comp. e HDMI/DVI.Italiano 24 Funzioni di base ■ Regolazione schermo PC ✎ Disponibile solo in modalità PC. x Grossa / Fine: consentono di rimuovere o ridurre i disturbi dell'immagine. Se la sola sintonia fine non è sufficiente per rimuovere il disturbo, regolare al meglio la frequenza con la funzioneGrossa ed eseguire nuovamente la sintonia fine. Una volta ridotto il disturbo, regolare nuovamente l'immagine in modo che sia allineata al centro dello schermo. x Posizione: consente di regolare la posizione dello schermo del PC mediante i tasti di direzione (u / d / l / r). x Image Reset: ripristina le impostazioni predefinite dell'immagine. I valori della frequenza, della posizione e le impostazioni di Regolazione autot sintonizzazione sono regolati automaticamente. ✎Disponibile solo in modalità PC. Utilizzo del televisore come schermo di un computer (PC) Impostazione del software del PC (basato su Windows XP) A seconda della versione di Windows e della scheda video, è possibile che le schermate effettive siano diverse, ma saranno quasi sempre valide le stesse informazioni di impostazione di base (in caso contrario, contattare il produttore del computer o un rivenditore Samsung). 1. Nel menu Start di Windows, fare clic su "Pannello di controllo". 2. Nella finestra "Pannello di controllo", fare clic su "Aspetto e temi". Verrà visualizzata una finestra di dialogo. 3. Fare clic su "Schermo". Verrà visualizzata una finestra di dialogo. 4. Nella finestra di dialogo, selezionare la scheda "Impostazioni". x Impostazione corretta delle dimensioni (risoluzione) [ottimale: 1920 x 1080 pixel]. (T19B300: 1366 x 768 pixels) x Se nella finestra di dialogo delle impostazioni dello schermo è disponibile un'opzione per la frequenza verticale, il valore corretto è "60" o "60 Hz". In caso contrario, fare clic su "OK" e chiudere la finestra di dialogo. Mantenimento della postura corretta durante l'utilizzo del prodotto Mantenere la postura corretta durante l'utilizzo del prodotto. x Tenere la schiena diritta. x Tenere gli occhi a una distanza di 45-50 cm dallo schermo. Guardare lo schermo da una posizione frontale e più alta rispetto ad esso. x Regolare l'angolazione del prodotto in modo che la luce non si rifletta sullo schermo. x Tenere i gomiti ad angolo retto e le braccia allo stesso livello del dorso delle mani. x Tenere i gomiti ad angolo retto. x Tenere la pianta dei piedi distesa sul pavimento con le ginocchia a un angolo di 90 gradi o superiore e mantenere la posizione delle braccia in modo che siano più in basso rispetto al cuore. ¦ Modifica delle Opzioni immagine Impostazioni avanzate MENUm→ Immagine → Impostazioni avanzate → ENTERE (La funzione Impostazioni avanzate è disponibile in modalità Standard / Film) Rispetto ai modelli precedenti, il nuovo display a LED Samsung presenta un'immagine più dettagliata. ✎Quando si collega un PC, è possibile modificare solo l'impostazione di Bilan bianco. Impostazioni avanzate Solo modalità RGB Off Spazio colore Nativa Bilan bianco Gamma 0 Contrasto dinamico Alto Tonalità nero Off Incarnato 0 ■ Contrasto dinamico (Off / Basso / Medio / Alto): consente di regolare il contrasto dello schermo. ■ Tonalità nero (Off / Scuro / Più scura / Extra scura): consente di selezionare il livello di nero per regolare la profondità dello schermo. ■ Incarnato: consente di enfatizzare il rosa dell'incarnato. ■ Solo modalità RGB (Off / Rosso / Verde / Blu): consente di visualizzare i colori Rosso, Verde e Blu per la regolazione fine della tonalità e della saturazione. ■ Spazio colore (Auto / Nativa): consente di regolare l'intervallo dei colori disponibili per la creazione dell'immagine. ■ Bilan bianco: consente di regolare la temperatura del colore per un'immagine più naturale. R-Offset / G-Offset / B-Offset: consentono di regolare il livello di oscurità di ogni colore (rosso, verde, blu). R-Gain / G-Gain / B-Gain: consentono di regolare il livello di luminosità di ogni colore (rosso, verde, blu). Reset: ripristina le impostazioni predefinite di Bilan bianco. ■ Gamma: consente di regolare l'intensità dei colori primari. ■ Illuminazione moto (Off / On): consente di ridurre il consumo di energia tramite il controllo della luminosità.Italiano 25 Funzioni di base Opzioni immagine MENUm→ Immagine → Opzioni immagine → ENTERE ✎Quando si collega un PC, è possibile modificare solo l'impostazione di Toni colore. Opzioni immagine Toni colore Standard Filtro disturbo digitale Auto Filtro disturbo MPEG Auto Livello di nero HDMI . Basso Modalità Film Off Toni colore (Freddo / Standard / Caldo1 / Caldo2) ✎ Caldo1 o Caldo2 saranno disattivati se la modalità immagine è impostata su Dinamica. ✎ È possibile regolare e memorizzare le impostazioni per ogni dispositivo esterno collegato a un ingresso del display a LED. ■ Filtro disturbo digitale (Off / Basso / Medio / Alto / Auto / Visualiz automatica): se il segnale ricevuto dal display a LED è debole, è possibile attivare la funzione Filtro disturbo digitale per ridurre gli effetti statici e fantasma che potrebbero comparire sullo schermo. ✎ In caso di segnale debole, provare le varie opzioni finché non viene visualizzata l'immagine migliore. Visualiz automatica: visualizza l'intensità del segnale quando si cambiano i canali analogici. ✎ Disponibile solo per i canali analogici. ✎ Se la barra è verde, il segnale che si sta ricevendo è il migliore possibile. ■ Filtro disturbo MPEG (Off / Basso / Medio / Alto / Auto): riduce il disturbo MPEG per fornire una migliore qualità dell'immagine. ■ Livello di nero HDMI (Basso / Normale): consente di selezionare il livello di nero sullo schermo per regolarne la profondità. ✎ Disponibile solo in modalità HDMI (segnali RGB). ■ Modalità Film (Off / Auto1 / Auto2): consente di impostare il display a LED in modo che effettui automaticamente il rilevamento e l'elaborazione dei segnali dei film provenienti da tutte le sorgenti nonché la regolazione dell'immagine per una qualità ottimale. ✎ Disponibile in modalità TV, HDMI (1080i). ✎ Se l'immagine non appare naturale, modificare l'opzione impostandola su Off / Auto1 / Auto2 in Modalità Film. Reimposta immagine (Sì / No) ripristina le impostazioni predefinite della modalità immagine corrente. Menu Suono ¦ Modifica della modalità audio preimpostata MENUm→ Suono → Modalità audio → ENTERE Modalità audio t ■ Standard: seleziona la modalità audio normale. ■ Musica: enfatizza l'intensità della musica rispetto alle voci. ■ Film: fornisce la migliore qualità audio per i film. ■ Voce cristallina: enfatizza l'intensità delle voci rispetto ad altri suoni. ■ Amplificazione: aumenta l'intensità delle alte frequenze per consentire un ascolto migliore alle persone con problemi uditivi. ✎Se Seleziona altoparlante è impostato su Altoparlante esterno, la funzione Modalità audio è disabilitata. ¦ Regolazione delle impostazioni audio Effetto audio MENUm→ Suono → Effetto audio → ENTERE (solo modalità audio standard)  Questa funzione produce un audio virtuale a 5.1 canali ■ SRS TruSurround HD (Off / On) t surround attraverso una coppia di altoparlanti o di cuffie mediante l'uso della tecnologia HRTF (Head Related Transfer Function). ■ SRS TruDialog (Off / On)  Questa funzione permette di incrementare l'intensità della voce rispetto alla musica di sottofondo o agli effetti audio in modo che sia possibile udire meglio i dialoghi durante la visione di un programma. ■ Equalizzatore Regola la modalità audio. – Bilanciam. L / R: Controlla il bilanciamento degli altoparlanti sinistro e destro. 100Hz / 300Hz / 1 kHz / 3 kHz / 10 kHz (regolazione della larghezza di banda): consente di regolare il livello delle diverse frequenze di larghezza di banda. – Reset: Ripristina l'equalizzatore alle impostazioni predefinite.Italiano 26 Funzioni di base ¦ Sistemi audio, ecc. MENUm→ Suono → ENTERE Opzioni audio trasmissione ■ Lingua audio  (solo canali digitali)  Consente di cambiare il valore predefinito per la lingua audio. ✎ La lingua disponibile può variare a seconda della trasmissione. ■ Formato audio  (solo canali digitali)  Consente di selezionare il formato audio. ■ Descrizione audio  (non disponibile in tutti i paesi) (solo canali digitali)  Questa funzione gestisce il flusso audio per la funzione AD (Descrizione audio), trasmesso insieme all'audio principale dall'emittente. ✎ Descrizione audio (Off / On): consente di attivare o disattivare la funzione Descrizione audio. ✎ Volume: consente di regolare il volume della descrizione audio. Imp. supplementare (solo canali digitali) ■ Livello audio DTV (MPEG / HE-AAC): Questa funzione consente di ridurre la differenza di intensità di un segnale vocale (uno dei segnali ricevuti durante una trasmissione TV digitale) al livello desiderato. ✎ A seconda del tipo di segnale della trasmissione, è possibile regolare MPEG / HE-AAC tra -10 dB e 0 dB. ✎ Per aumentare o ridurre il volume, impostare rispettivamente una regolazione tra 0 e -10. ■ Uscita SPDIF: lo standard SPDIF (Sony Philips Digital InterFace) viene utilizzato per l'audio digitale al fine di ridurre le interferenze dirette agli altoparlanti e ai vari dispositivi digitali, ad esempio a un lettore DVD. – Formato audio: consente di selezionare il formato di uscita audio digitale (SPDIF). ✎ Il formato di uscita audio digitale (SPDIF) può variare a seconda della sorgente di ingresso. – Ritardo audio: consente di correggere i problemi di sincronizzazione audio-video durante la visione di un programma televisivo o di un video e durante l'ascolto di un'uscita audio digitale mediante un dispositivo esterno, ad esempio un ricevitore AV (0 ms - 250 ms). ✎ Non disponibile per la serie TB300. ■ Comp Dolby Digital (Line / RF): questa funzione riduce al minimo la differenza di intensità tra un segnale dolby digital e un segnale vocale (ad es. audio MPEG, HE-AAC, ATV). ✎ Selezionare Line per ottenere un suono dinamico e RF per ridurre la differenza tra suoni alti e bassi di notte. Line: consente di impostare il livello di uscita dei segnali maggiori o minori di -31 dB (riferimento) su -20 dB o -31 dB. RF: consente di impostare il livello di uscita dei segnali maggiori o minori di -20 dB (riferimento) su -10 dB o -20 dB. Impostazioni altoparlanti ■ Seleziona altoparlante (Altoparlante esterno / Altoparlante TV): a causa della differenza di velocità di decodifica tra l'altoparlante principale e il ricevitore audio, potrebbe verificarsi un effetto di eco. In tal caso, impostare il televisore su Altoparlante esterno. ✎ Quando Seleziona altoparlante è impostato su Altoparlante esterno, i tasti volume e MUTE non funzioneranno e le impostazioni audio saranno limitate. ✎ Se Seleziona altoparlante è impostato su Altoparlante esterno. x Altoparlante TV: Off, Altoparlante esterno: On ✎ Se Seleziona altoparlante è impostato su Altoparlante TV. x Altoparlante TV: On, Altoparlante esterno: On ✎ In assenza di un segnale video, entrambi gli altoparlanti saranno disattivi. ✎ Non disponibile per la serie TB300. ■ Volume auto (Off / Normale / Notte): impostare su Normale per uniformare il livello del volume di tutti i canali. Notte: questa modalità fornisce un'esperienza audio migliore rispetto alla modalità Normale, escludendo quasi ogni rumore. Utile di notte. Reset audio (Sì / No) Consente di ripristinare i valori predefiniti di fabbrica di tutte le impostazioni audio. ¦ Quando si seleziona Selezione della modalità audio Dual fg, sullo schermo viene visualizzata t la modalità audio corrente. Tipo di audio Dual f-g Impostazione predefinita A2 Stereo Mono Mono Passaggio Stereo Stereo ↔ Mono automatico Dual Dual f ↔ Dual g Dual f NICAM Stereo Mono Mono Passaggio Stereo Mono ↔ Stereo automatico Dual Mono ↔ Dual f  Dual g  Dual f ✎Se il segnale Stereo è debole e si verifica un passaggio automatico, passare alla modalità Mono. ✎Funzione attivata solo con segnali audio stereo. ✎Disponibile solo se la Sorgente di ingresso è impostata su TV.Italiano 27 Funzioni di base Menu Sistema ¦ Impostazione dell'ora MENUm→ Sistema → ENTERE Ora ■ Orologio: l'impostazione dell'orologio è necessaria per utilizzare le varie funzioni di timer del display a LED. ✎ L'ora corrente verrà visualizzata ogni volta che si preme il tasto INFO. ✎ Se si scollega il cavo di alimentazione, è necessario impostare nuovamente l'orologio. Modalità orologio (Auto / Manuale) x Auto: l'ora corrente viene impostata automaticamente mediante l'orario inviato da un canale digitale. ✎ Per l'impostazione automatica dell'orario, è necessario che l'antenna sia collegata. x Manuale: consente di impostare manualmente l'ora. ✎ A seconda del segnale e della stazione di trasmissione, l'impostazione automatica dell'ora potrebbe non essere corretta. In tal caso, impostare l'ora manualmente. Imposta Ora: consente di impostare manualmente giorno, mese, anno, ora e minuti. ✎ Disponibile solo se la Modalità orologio è impostata su Manuale. ✎ È possibile impostare direttamente Day, Month, Year, Hour e Minute premendo i tasti numerici sul telecomando. Fuso orario (Auto / Manuale) (in base alla nazione): consente di selezionare il fuso orario della propria zona. ✎ Questa funzione è disponibile solo se Modalità orologio è impostata su Auto. – GMT (da GMT-3:00 a GMT-1:00 / GMT / da GMT+1:00 a GMT+12:00): selezionare il fuso orario della propria zona. ✎ Questa funzione è disponibile solo se Fuso orario è impostato su Auto. – DST (ora legale) (Off / On): consente di attivare o disattivare la funzione dell'ora legale. ✎ Questa funzione è disponibile solo se Fuso orario è impostato su Auto. Utilizzo del timer stand-by ■ Timer stand-by t: spegne automaticamente il display a LED dopo un periodo di tempo preimpostato (30, 60, 90, 120, 150 e 180 minuti). ✎ Per annullare la funzione Timer stand-by, selezionare Off. Impostazione del timer di accensione / spegnimento ■ Timer accensione Timer accensione 1 / Timer accensione 2 / Timer accensione 3 : è possibile impostare tre diversi timer di accensione. È necessario impostare prima l'orologio. Timer accensione 1 Impostazione Off Ora 0:00 Volume 20 Sorgente TV Antenna DTV Canale 1 Dom Lun Mar Mer Gio Ven Sab R Ritorna Chiudi Impostazione: selezionare Off, 1 volta, Ogni gg, Lun~Ven, Lun~Sab, Sab~Dom o Manuale in base alle proprie esigenze. Se si seleziona Manuale, è possibile impostare il giorno in cui si desidera attivare il timer. ✎ Il segno c indica il giorno selezionato. Ora: impostare l'ora e i minuti. Volume: impostare il livello di volume desiderato. Sorgente: selezionare una sorgente di ingresso all'accensione automatica del display a LED. (l'opzione USB può essere selezionata solo in presenza di un dispositivo USB collegato al display a LED). Antenna (se Sorgente è impostata su TV): selezionare ATV o DTV. Canale (se Sorgente è impostata su TV): selezionare il canale desiderato. Musica / Foto (se Sorgente è impostata su USB): selezionare una cartella presente nel dispositivo USB contenente file musicali o di foto da riprodurre all'accensione automatica del display a LED. ✎ NOTA x Se nel dispositivo USB non sono presenti file musicali o se non si seleziona una cartella contenente file musicali, il timer non funzionerà correttamente. x Se nel dispositivo USB è presente un solo file di foto, la funzione Slide Show non verrà eseguita. x Se il nome della cartella è troppo lungo, la cartella non può essere selezionata. x A ogni dispositivo USB utilizzato viene assegnata una cartella. In caso di più dispositivi USB dello stesso tipo, verificare che le cartelle assegnate a ognuno di essi abbiano nomi diversi. x Si consiglia di utilizzare una memory stick USB e un lettore multicard quando si utilizza la funzione Timer accensione. x La funzione Timer accensione potrebbe non funzionare con dispositivi USB dotati di batteria incorporata, lettori MP3 o dispositivi multimediali portatili di alcuni produttori a causa dei lunghi tempi necessari per il loro riconoscimento.Italiano 28 Funzioni di base ■ Timer spegnimento Timer spegnimento 1 / Timer spegnimento 2 / Timer spegnimento 3 : è possibile impostare tre diversi timer di spegnimento. È necessario impostare prima l'orologio. Timer spegnimento1 Impostazione Off Ora 0:00 Dom Lun Mar Mer Gio Ven Sab R Ritorna Chiudi Impostazione: selezionare Off, 1 volta, Ogni gg, Lun~Ven, Lun~Sab, Sab~Dom o Manuale in base alle proprie esigenze. Se si seleziona Manuale, è possibile impostare il giorno in cui si desidera attivare il timer. ✎ Il segno c indica il giorno selezionato. Ora: impostare l'ora e i minuti. ¦ Blocco di programmi MENUm→ Sistema → Sicurezza → ENTERE Sicurezza ✎Prima della schermata di impostazione, viene visualizzata quella per l'immissione del PIN. ✎Immettere il PIN personale a 4 cifre. Il PIN predefinito è "0- 0-0-0". Per cambiarlo, utilizzare l'opzione Cambia PIN. ■ Blocco canali (Off / On): consente di bloccare i canali nella gestione dei canali per impedire che persone non autorizzate, ad esempio i bambini, guardino programmi non adatti a loro. ✎ Disponibile solo se la Sorgente di ingresso è impostata su TV. ■ Blocco programma (in base alla nazione): consente di impedire a persone non autorizzate, ad esempio ai bambini, di guardare programmi non adatti a loro mediante un codice PIN a 4 cifre definito dall'utente. Se il canale selezionato è bloccato, verrà visualizzato il simbolo "\". ✎ Le voci di Blocco programma variano in base alla nazione. ■ Cambia PIN: viene visualizzata la schermata Cambia PIN. Scegliere 4 cifre per il PIN e immetterle. È possibile modificare l'ID personale necessario per impostare il display a LED. Immettere nuovamente le 4 cifre. Quando la schermata di conferma scompare, il PIN è stato memorizzato. ¦ Soluzioni di economia MENUm→ Sistema → Soluzione Eco → ENTERE Soluzione Eco ■ Risparmio energia (Off / Basso / Medio / Alto / Immagine off)t: consente di regolare la luminosità del display a LED per ridurre il consumo di energia. Se si seleziona Immagine off, lo schermo viene spento, ma il suono rimane attivo. Per accendere lo schermo, premere un tasto qualsiasi ad eccezione di quello del volume. ■ No segnale std-by (Off / 15 min / 30 min / 60 min): per evitare un inutile consumo di energia, impostare per quanto tempo il display a LED deve rimanere acceso in caso di assenza di ricezione di segnale. ✎ Funzione disabilitata quando il PC è in modalità di risparmio energia. ■ Auto Power Off (Off / On): consente di risparmiare energia spegnendo automaticamente il display a LED quando non viene effettuata alcuna operazione per 4 ore. ¦ Altre funzioni MENUm→ Sistema → ENTERE Lingua ■ Lingua menu: consente di impostare la lingua del menu. ■ Lingua Teletext: consente di impostare la lingua per il Teletext. ✎ Qualora la trasmissione non sia disponibile nella lingua selezionata, la lingua predefinita è l'inglese. ■ Lingua preferita (Audio principale / Audio secondario / Sottotitoli principali / Secondaria Sottotitoli): consente di selezionare una lingua che sarà quella predefinita quando si seleziona un canale. Sottotitoli Utilizzare questo menu per impostare la modalità Sottotitoli. ■ Sottotitoli (Off / On): attiva e disattiva i sottotitoli. ■ Modalità sottotitoli (Normale / Non udenti): consente di impostare la modalità dei sottotitoli. ■ Lingua Sottotitoli: consente di impostare la lingua dei sottotitoli. ✎ Se il programma che si sta guardando non supporta la funzione Non udenti, viene attivata automaticamente la lingua impostata come Preferita nonostante sia selezionata la modalità Non udenti. ✎ Qualora la trasmissione non sia disponibile nella lingua selezionata, la lingua predefinita è l'inglese.Italiano 29 Funzioni di base Testo digitale (Disabilita / Abilita) (solo Regno Unito) Questa funzione è disponibile se il programma viene trasmesso con testo digitale. Prot. Auto. dopo. ■ Off / 2 ore / 4 ore / 8 ore / 10 ore: se lo schermo rimane inattivo con un'immagine fissa per un certo periodo di tempo definito dall'utente, viene attivato il salvaschermo per evitare la formazione di immagini fantasma sullo schermo. Generale ■ Rispar. ener. max. (Off / On): spegne il monitor del PC quando non viene utilizzato per un certo periodo di tempo, al fine di ridurre il consumo di energia. ■ Modalità gioco (Off / On): quando si effettua il collegamento a una console per videogiochi, ad esempio PlayStation™ o Xbox™, è possibile ottenere un'esperienza di gioco più realistica selezionando questa modalità. ✎NOTA x Precauzioni e limitazioni per la modalità gioco – Per scollegare la console e collegare un altro dispositivo esterno, impostare Modalità gioco su Off nel menu di impostazione. – Se si accede al menu del display a LED in Modalità gioco, lo schermo presenterà un leggero tremolio. x Modalità gioco non è disponibile quando la sorgente di ingresso è impostata su TV o PC. x Dopo aver collegato la console per videogiochi, impostare Modalità gioco su On. Si potrebbe notare una riduzione della qualità dell'immagine. x Se Modalità gioco è impostata su On: – Modalità immagine viene impostata su Standard e Modalità audio viene impostata su Film. ■ Blocco pannello (Off / On): consente di bloccare o sbloccare immediatamente tutti i tasti del pannello frontale. Se questa funzione è impostata su On, non funzionerà alcun tasto del pannello frontale. ■ Logo di avvio (Off / On): attiva o disattiva la visualizzazione del logo Samsung all'accensione del display a LED. Interfaccia comune ■ Menu CI: consente all'utente di accedere al menu del modulo CAM. Selezionare il Menu CI in base alla scheda PC. ■ Info sull'applicazione: visualizza le informazioni sul modulo CAM inserito nello slot CI e sulla scheda CI o CI+ inserita nel modulo CAM. È possibile installare il modulo CAM in qualsiasi momento, con il display a LED acceso o spento. 1. Acquistare un modulo CAM CI presso un rivenditore locale o via telefono. 2. Inserire la scheda CI o CI+ nel modulo CAM seguendo la direzione indicata dalla freccia. 3. Inserire il modulo CAM con la scheda CI o CI+ nello slot Common Interface, seguendo la direzione indicata dalla freccia in modo che sia allineata in parallelo con lo slot. 4. Verificare che sia possibile visualizzare un'immagine su un canale a segnale criptato. ¦ PIP (Picture in Picture) MENUm→ Sistema → PIP → ENTERE Consente di guardare contemporaneamente una trasmissione PIP t televisiva e le immagini provenienti da una sorgente video esterna. La funzione PIP (Picture-in-Picture) non viene attivata se le modalità sono le stesse. ✎NOTA x Per l'audio in modalità PIP, vedere le istruzioni relative all'impostazione Selezione audio. x Se si spegne il display a LED durante la visione in modalità PIP, la finestra PIP scomparirà. x L'immagine nella finestra PIP potrebbe apparire leggermente innaturale quando si utilizza lo schermo principale per visualizzare un videogioco o un karaoke. x Se è impostato Blocco programma, non è possibile utilizzare la funzione PIP. x Impostazioni PIP Immagine principale Immagine secondaria HDMI, HDMI(PC), Comp., PC TV ■ PIP (Off / On): attiva o disattiva la funzione PIP. ■ Canale: selezionare il canale per la schermata secondaria. ■ Dimensione (Õ / Ã): selezionare una dimensione per l'immagine secondaria. ■ Posizione (à / – / — / œ): selezionare una posizione per l'immagine secondaria. ■ Selezione audio (Principale / Secondario): consente di selezionare l'audio desiderato (Principale / Secondario) in modalità PIP. ¦ DivX® Video On Demand Visualizza il codice di registrazione autorizzato per il televisore. Se si esegue la connessione al sito Web DivX e si effettua la registrazione, è possibile scaricare il file di registrazione VOD. Una volta riprodotto tale file mediante i contenuti multimediali, la registrazione è completata. ✎Per ulteriori su DivX® VOD, visitare il sito "http://vod.divx. com".Italiano 30 Funzioni di base Menu Supporto MENUm→ Supporto → ENTERE Auto diagnosi ✎Auto diagnosi potrebbe richiedere alcuni secondi per il completamento dell'operazione, ma si tratta di un funzionamento normale del display a LED. ■ Test immagine (Sì / No): controlla l'eventuale presenza di problemi di immagine. Sì: se il monoscopio non appare o è presente un disturbo nel monoscopio, selezionare Sì. Potrebbe essersi verificato un problema nel display a LED. Contattare il Call Center Samsung per ricevere assistenza. No: se il monoscopio viene visualizzato correttamente, selezionare No. Potrebbe essersi verificato un problema nell'apparecchiatura esterna. Verificare i collegamenti. Se il problema persiste, vedere il manuale dell'utente del dispositivo esterno. ■ Test audio (Sì / No): utilizza la melodia incorporata per controllare l'eventuale presenza di problemi audio. Sì: se l'audio non viene riprodotto o viene riprodotto solo da un altoparlante durante il test, selezionare Sì. Potrebbe essersi verificato un problema nel display a LED. Contattare il Call Center Samsung per ricevere assistenza. No: se l'audio viene riprodotto dagli altoparlanti, selezionare No. Potrebbe essersi verificato un problema nell'apparecchiatura esterna. Verificare i collegamenti. Se il problema persiste, vedere il manuale dell'utente del dispositivo esterno. ■ Informazioni sul segnale: (solo canali digitali) La qualità di ricezione dei canali HD o è perfetta o i canali non sono disponibili. Regolare l'antenna per aumentare la potenza del segnale. ■ Reset: ripristina i valori predefiniti di fabbrica di tutte le impostazioni, ad eccezione di quelle di rete. Aggiornamento software Aggiornamento software può essere eseguito tramite un segnale di trasmissione o scaricando il firmware più recente dal sito "www.samsung.com" in un dispositivo di memoria USB. Versione corrente: indica il software attualmente installato nel display a LED. ✎Il software viene riportato nel formato "Anno/Mese/ Giorno_Versione". Aggiornamento software Tramite USB Tramite canale Software alternativo Aggiornamento mod Standby 2 ore dopo Installazione della versione più recente ■ Tramite USB: inserire nel televisore l'unità USB contenente il file di aggiornamento del firmware scaricato dal sito "www.samsung.com". Non scollegare l'alimentazione né rimuovere l'unità USB fino a quando l'aggiornamento non viene completato. Al termine dell'aggiornamento, il televisore si spegnerà e si riaccenderà automaticamente. Una volta aggiornato il software, le impostazioni video e audio selezionate torneranno ai valori predefiniti. Si consiglia di annotare le proprie impostazioni in modo da poterle ripristinare facilmente dopo l'aggiornamento. ■ Tramite canale: aggiorna il software tramite il segnale di trasmissione. ✎ Se la funzione viene selezionata durante il periodo di trasmissione del software, le operazioni di ricerca e download del software verranno eseguite automaticamente. ✎ Il tempo necessario per il download del software dipende dallo stato del segnale. ■ Software alternativo: consente di sostituire il software attuale con quello alternativo. ■ Aggiornamento mod Standby (Off / 1 ora dopo / 2 ore dopo / 00:00 / 02:00 / 12:00 / 14:00): all'ora selezionata verrà eseguito automaticamente un aggiornamento manuale. A causa dell'attivazione interna dell'alimentazione dell'unità, è possibile che lo schermo si accenda debolmente. Tale fenomeno potrebbe continuare per più di 1 ora fino al completamento dell'aggiornamento del software. Contattare Samsung Fare riferimento a queste informazioni quando il display a LED non funziona correttamente o si desidera aggiornare il software. Sono incluse le informazioni sui Call Center Samsung e su come scaricare prodotti e software. Pag inz contenuti Consente di accedere a contenuti utili di vario tipo. Parte laterale del TV Unità USBItaliano 31 Funzioni avanzate Consente di riprodurre video, foto e file musicali salvati in un dispositivo USB MSC (Mass Storage Class). 1. Premere il tasto CONTENT. 2. Premere il tasto l / r per selezionare il menu desiderato (Media Play), quindi premere il tasto ENTERE. CONTENT → Media Play → ENTERE Utilizzo di Media Play ¦ Collegamento di un dispositivo USB 1. Accendere il televisore. 2. Collegare un dispositivo USB contenente file musicali e di foto al connettore USB sulla parte laterale del televisore. 3. Una volta collegato il dispositivo USB al televisore, viene visualizzata una finestra popup. Sarà quindi possibile selezionare Dispositivo connesso. ✎In caso di file multimediali sprovvisti di licenza, il funzionamento potrebbe non essere corretto. ✎Informazioni importanti prima di utilizzare Media Play x Il protocollo MTP (Media Transfer Protocol) non è supportato. x Il file system supporta i formati FAT16, FAT32 e NTFS. x Alcuni tipi di dispositivi audio e fotocamere digitali USB potrebbero non essere compatibili con questo televisore. x Media Play supporta solo dispositivi USB MSC (Mass Storage Class), ovvero dispositivi di archiviazione di massa per il trasporto bulk-only. Esempi di dispositivi MSC sono le chiavette, i lettori di schede flash e le unità HDD USB (gli hub USB non sono supportati). I dispositivi devono essere collegati direttamente alla porta USB del televisore. x USB (HDD) non supportato. x Prima di collegare il dispositivo al televisore, eseguire il backup dei file per evitare eventuali danneggiamenti o perdite di dati. SAMSUNG declina ogni responsabilità in caso di file di dati danneggiati o perdita di dati. x Non scollegare il dispositivo USB durante la fase di caricamento. x Maggiore è la risoluzione dell'immagine, tanto più tempo sarà necessario per la sua visualizzazione a schermo. x La risoluzione JPEG massima supportata è di 15360 x 8640 pixel. x In caso di file non supportati o danneggiati, viene visualizzato un messaggio che segnala che il formato non è supportato. x Non è possibile riprodurre file MP3 con DRM scaricati da un sito a pagamento. DRM (Digital Rights Management) è una tecnologia a supporto della creazione, della distribuzione e della gestione di contenuti in modo integrato e completo, che include la protezione dei diritti e degli interessi dei fornitori di tali contenuti, la prevenzione della copia non autorizzata nonché la gestione degli addebiti e dei pagamenti. x Se sono collegati più di 2 dispositivi PTP, sarà possibile utilizzarne solo uno alla volta. x Se sono collegati più di due dispositivi MSC, alcuni di essi potrebbero non essere riconosciuti. Se un dispositivo USB richiede una potenza elevata (più di 500 mA o 5 V), potrebbe non essere supportato. x Se viene visualizzato un messaggio di avviso di sovralimentazione mentre si collega o si utilizza un dispositivo USB, il dispositivo potrebbe non essere riconosciuto o potrebbe non funzionare correttamente. Media Play / Video / 3,23 GB liberi / 3,55GB Cruzer Blade Video Foto Musica R Ritorna • L'immagine visualizzata può variare a seconda del modello. Parte laterale del TV Unità USBItaliano 32 Funzioni avanzate x Se il televisore non riceve alcun segnale per il periodo di tempo specificato in Prot. Auto. dopo., si attiverà il salvaschermo. x La modalità di risparmio energia di alcune unità disco rigido esterne potrebbe essere automaticamente disattivata quando queste unità vengono collegate al televisore. x Se si utilizza un cavo di prolunga USB, il dispositivo USB potrebbe non essere riconosciuto o potrebbe essere impossibile leggere i file presenti nel dispositivo. x Se un dispositivo USB collegato al televisore non viene riconosciuto, l'elenco dei file del dispositivo è danneggiato o un file dell'elenco non viene riprodotto, collegare il dispositivo USB al PC, formattare il dispositivo, quindi verificare il collegamento. x Media Play supporta solo il formato JPEG sequenziale. ¦ Visualizzazione a schermo Posizionarsi sul file desiderato mediante i tasti u / d / l / r, quindi premere il tasto ENTERE. Il file viene quindi riprodotto. La schermata Media Play può variare a seconda del metodo di accesso. Modalità contenuti: in quest'area è possibile selezionare la categoria di contenuti desiderata. Informazioni: vengono indicati la categoria di contenuti selezionata (ad esempio Musica), il dispositivo (ad esempio l'unità USB), il nome della cartella/file e la pagina. Informazioni sul file selezionato. Cartella superiore Video_02 1.Gen.2012 Video_02.AVI 1.Gen.2012 17,6 MB Video_03 1.Gen.2012 Video_04 1.Gen.2012 Video_05 1.Gen.2012 Video_06 1.Gen.2012 Video_07 1.Gen.2012 Video_08 1.Gen.2012 Video_01 1.Gen.2012 Media Play / Video / Cruzer.../Video_02.AVI 2 / 8 �µSp pagina E Riprod T Strumenti R Ritorna Pulsanti operativi • �Riporta la visualizzazione alla pagina precedente. Disponibile solo in Musica. • µ Avanza la visualizzazione alla pagina successiva. Disponibile solo in Musica. • ERiprod.: consente di riprodurre il file multimediale. • T Strumenti: visualizza il menu delle opzioni. • R Ritorna: riporta la visualizzazione al passo precedente. • L'immagine visualizzata può variare a seconda del modello.Italiano 33 Funzioni avanzate Video Riproduzione di un video 1. Premere il tasto l / r / u / d per selezionare il video desiderato fra quelli riportati nell'elenco. 2. Premere il tasto ENTERE o il tasto ∂ (Riprod.). x Il nome del file selezionato viene visualizzato in alto con la relativa durata di riproduzione. x Se le informazioni sulla durata non sono disponibili, il tempo di riproduzione e la barra di avanzamento non vengono visualizzati. x Durante la riproduzione del video, è possibile eseguire ricerche utilizzando i tasti l e r. x Durante la riproduzione, è inoltre possibile utilizzare i tasti π (REW) e µ (FF). ✎ In questa modalità, si possono visualizzare i filmati contenuti in un gioco, ma non è possibile giocare. • L'immagine visualizzata può variare a seconda del modello. Formati di sottotitoli supportati – Esterni Nome Estensione MPEG-4 Timed text .ttxt SAMI .smi SubRip .srt SubViewer .sub Micro DVD .sub o .txt SubStation Alpha .ssa Advanced SubStation Alpha .ass Powerdivx .psb – Interni Nome Contenitore Xsub AVI SubStation Alpha MKV Advanced SubStation Alpha MKV SubRip MKV MPEG-4 Timed text MP4Italiano 34 Funzioni avanzate Formati video supportati Estensione file Contenitore Codec video Risoluzione Frequenza fotogrammi (fps) Velocità in bit (Mbps) Commenti Codec audio *.avi *.mkv *.asf *.wmv *.mp4 *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.m2ts *.mts *.divx AVI MKV ASF MP4 3GP VRO VOB PS TS DivX 3.11 / 4.x / 5.1 / 6.0 1920 x 1080 30 20 [40] GMC non supportato AC3 LPCM ADMPCM(IMA, MS) AAC HE-AAC WMA DD+ MPEG(MP3) DTS Core Vorbis MPEG4 SP / ASP H.264 BP / MP / HP Non include FMO / ASO / RS Supporta BP / MP / HP livello 4.1 H.263 Profile3, limitato fino a risoluzione SD Motion JPEG 640 x 480 10 Window Media Video v9 1920 x 1080 20 [40] VC1 SP / MP /A P L3 supportato, L4 non supportato Simple Profile Medium Level Main Profile High Level Advanced Profile Level 3 WMV9 supportato MPEG2 Hight Profile High Level MPEG1 MPEG-1 tranne D-pictureItaliano 35 Funzioni avanzate Altre limitazioni ✎NOTA x In caso di problemi con il contenuto di un codec, il codec non sarà supportato. x Se le informazioni relative a un Contenitore non sono esatte e il file è in errore, il Contenitore non sarà in grado di riprodurlo correttamente. x La riproduzione di audio o video potrebbe non funzionare se la velocità in bit o la frequenza fotogrammi standard dei contenuti è superiore alla velocità fotogrammi/sec compatibile riportata nella tabella precedente. x Se la tabella dell'indice è in errore, la funzione di ricerca non è supportata. x Durante la riproduzione di un video tramite una connessione di rete, potrebbero verificarsi sbalzi nella lettura del file. Nome Formato x Supporta fino a H.264, Livello 4.1 x H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 e AVCHD non supportati. x MPEG4 SP, ASP: – Al di sotto di 1280 x 720: massimo 60 fotogrammi – Al di sopra di 1280 x 720: massimo 30 fotogrammi x GMC 2 o versione successiva non supportata. x Supporta fino a WMA 7, 8, 9, STD x WMA 9 PRO non supporta l'audio a più di 2 canali o senza perdita di dati. x Frequenza di campionamento WMA a 22050 Hz mono non supportata. Foto Visualizzazione di una foto (o di una proiezione diapositive) 1. Premere il tasto u / d / l / r per selezionare la foto fra quelle riportate nell'elenco. 2. Premere il tasto ENTERE. – Quando viene visualizzata la foto selezionata, premere il tasto ENTERE per avviare la proiezione diapositive. – Durante la proiezione diapositive, verranno visualizzati tutti i file contenuti nell'elenco secondo il loro ordine. ✎Impostando Musica sottof attiv su On, è possibile riprodurre automaticamente file musicali durante la proiezione diapositive. ✎Non è possibile modificare l'impostazione di Musica sottof attiv finché non è stato completato il caricamento. • L'immagine visualizzata può variare a seconda del modello. 0801181247070.JPG 1.Gen.2012 663,0KB 1920 x 1080 �µSp pagina E Riprod T Strumenti R Ritorna Media Play / Foto / Cruzer... / Foto / 0801181... .JPG 7 / 1000 Cartella superiore Formati immagine supportati Estensione file Formato Risoluzione *.jpg JPEG 15360 x 8640 *.bmp BMP 1920 x 1080 *.mpo MPO 15360 x 8640Italiano 36 Funzioni avanzate Musica Riproduzione di musica 1. Premere il tasto u / d per selezionare la Musica desiderata fra i brani riportati nell'elenco. 2. Premere il tasto ENTERE. ✎Consente di visualizzare soltanto i file la cui estensione è parte del seguente elenco di formati musicali supportati. I file con altre estensioni non vengono visualizzati, anche se sono stati salvati nello stesso dispositivo USB. ✎Qualora il suono risultasse anomalo durante la riproduzione di file MP3, regolare la funzioneEqualizzatore nel menu Suono. (un file MP3 con modulazione eccessiva può causare problemi audio). • L'immagine visualizzata può variare a seconda del modello. Media Play / Musica / Cruzer... / Musica / Music_01.mp3 Music_01 Singer 1 Music_02 Singer 2 Music_01 Singer 1 2003 Fallen Altro 2:36 / 5:00 Music_03 Singer 3 Music_04 Singer 4 Music_05 Singer 5 Music_06 Singer 6 Music_07 Singer 7 Music_08 Singer 8 Music_09 Singer 9 Cartella superiore b{ Sp pagina ERiprod T Strumenti R Ritorna Riproduzione di file musicali selezionati 1. Premere il tasto TOOLST, quindi selezionare Riprod. selez. 2. Selezionare i file musicali desiderati. ✎ A sinistra dei file selezionati viene visualizzato il segno c. 3. Premere il tasto TOOLST, quindi selezionare Riprod. selez. ✎ È possibile selezionare e deselezionare tutti i file musicali scegliendo Seleziona tutto / Deseleziona tutto. Formati musicali supportati Estensione file Tipo Codec *.mp3 MPEG MPEG1 Audio Layer 3 *.m4a *.mpa *.aac *.3ga MPEG4 AAC *.flac FLAC FLAC *.ogg OGG Vorbis *.wma WMA WMAItaliano 37 Funzioni avanzate ¦ Media Play - Funzioni aggiuntive Menu delle opzioni di riproduzione di Video / Foto / Musica Premere il tasto TOOLST per poter eseguire le seguenti operazioni. Categoria Operazione Video Foto Musica Shuffle Mode Consente di riprodurre i file musicali in modo casuale. > Modalità Ripeti Consente di riprodurre i file multimediali ripetutamente. > > Modalità immagine Consente di regolare l'impostazione dell'immagine. > > Modalità audio Consente di regolare l'impostazione audio. > > > Avvia proiezione diapositive / Arresta proiezione diapositive Consente di avviare o mettere in pausa una proiezione diapositive. > Velocità slide show Consente di selezionare la velocità della proiezione diapositive. > Musica sottof attiv Consente di attivare/disattivare la musica di sottofondo durante la visione di una proiezione diapositive. > Background Music Setting Consente di selezionare la musica di sottofondo durante la visione di una proiezione diapositive. > Zoom Consente di ingrandire le immagini in modalità a pieno schermo. > Ruota Consente di ruotare le immagini in modalità a pieno schermo. > Informazioni Visualizza informazioni dettagliate sul file riprodotto. > > > Riprod. selez. Consente di riprodurre i file selezionati. > > > Ricerca titolo Consente di spostarsi direttamente a un altro titolo. > Ricerca durata Consente di effettuare ricerche nel filmato mediante i tasti l e r a intervalli di 1 minuto. > Formato immagine Consente di regolare il formato immagine come desiderato. > Sottotitoli Consente di impostare il sottotitolo On / Off Consente di riprodurre un file video con testo visibile. Impost. sottotitoli Questa opzione è disponibile solo se il nome del file con il testo corrisponde al nome del file video. > Lingua audio Consente di visualizzare un video in una lingua supportata a scelta. Questa opzione è disponibile solo quando viene riprodotto un file che supporta diversi formati audio. > >Italiano 38 Altre informazioni Funzione Teletext dei canali analogici Nella pagina dell'indice del servizio Teletext sono riportate le informazioni sulle modalità di utilizzo del servizio. Affinché le informazioni del Teletext vengano visualizzate correttamente, è necessario che la ricezione del canale sia stabile. In caso contrario, alcune informazioni potrebbero andare perdute o alcune pagine potrebbero non essere visualizzate. ✎Per spostarsi tra le pagine del Teletext, premere i tasti numerici sul telecomando. 1 / (Teletext on / mix/off): attiva la modalità Teletext per il canale corrente. Premere il tasto due volte per sovrapporre le informazioni della modalità Teletext alla trasmissione corrente. Premerlo ancora una volta per uscire dalla modalità Teletext. 2 8 (memorizza): memorizza le pagine del Teletext. 3 6 (indice): visualizza la pagina dell'indice (contenuti) in qualsiasi momento durante la visione del Teletext. 4 4 (dimensione): visualizza il Teletext nella metà superiore dello schermo a dimensioni raddoppiate. Per spostare il testo nella metà inferiore, premere di nuovo il tasto. Per una visualizzazione normale, premerlo ancora una volta. 5 9 (mantieni): mantiene la visualizzazione sulla pagina corrente nel caso in cui ci siano altre pagine secondarie che scorrono automaticamente. Per riprendere la visualizzazione normale, premere di nuovo il tasto. 6 Tasti colorati (rosso, verde, giallo, blu): se l'emittente utilizza il sistema FASTEXT, i vari argomenti contenuti in una pagina del Teletext vengono codificati a colori e possono essere selezionati premendo i tasti colorati. Premere il tasto del colore corrispondente all'argomento desiderato. Verrà visualizzata una nuova pagina con codifica a colori, in cui sarà possibile selezionare le varie voci seguendo lo stesso metodo. Per visualizzare la pagina precedente o successiva, premere il tasto del colore corrispondente. 7 0 (modalità): seleziona la modalità del Teletext (LIST / FLOF). Se premuto in modalità LIST, viene attivata la modalità di salvataggio elenco. In tale modalità, è possibile salvare un pagina del Teletext in un elenco utilizzando il tasto 8 (memorizza). 8 1 (pagina secondaria): visualizza la pagina secondaria disponibile. 9 2 (pagina su): visualizza la pagina successiva del Teletext. 0 3 (pagina giù): visualizza la pagina precedente del Teletext. ! 5 (scopri): visualizza il testo nascosto (ad esempio le risposte di un gioco a quiz). Per visualizzare la schermata normale, premere di nuovo il tasto. @ 7 (annulla): riduce la visualizzazione del Teletext per la sovrapposizione alla trasmissione corrente. Pagina tipica del Teletext Area Sommario A Numero della pagina selezionata. B Indicazione del canale televisivo. C Numero della pagina corrente o indicazioni di stato della ricerca. D Data e ora. E Testo. F Informazioni di stato. Informazioni FASTEXT. 7 8 9 0 ! @ 3 1 4 5 6 2Italiano 39 Altre informazioni Installazione di un supporto a parete / piedistallo da tavolo Preparazione per l'installazione di un supporto a parete / piedistallo da tavolo 1. Spegnere il prodotto e scollegare il cavo di alimentazione dalla presa a muro. 2. Stendere un panno morbido o un cuscino su una superficie piana per proteggere il pannello e appoggiarvi il prodotto con lo schermo rivolto verso il basso. 3. Mantenere il corpo principale del prodotto con una mano e staccare il piedistallo tirandolo nella direzione indicata dalla freccia come mostrato nella figura. Installazione di un supporto a parete/piedistallo da tavolo 1 A 2 3 4 4. Allineare il supporto a parete / piedistallo da tavolo con il monitor / display a LED e fissarlo saldamente serrando la vite. 5. Allineare la scanalatura presente nella parte del prodotto da collegare al supporto con la scanalatura presente nel supporto (supporto a parete, piedistallo da tavolo o altro supporto) e fissare saldamente il supporto serrando la vite. A B Kit di montaggio a parete / piedistallo da tavolo (non forniti) A Superficie di attacco del supporto a parete / piedistallo da tavolo B [ATTENZIONE Importante Per l’installazione a muro utilizzare viti lunghe massimo 14 mm (L14).Italiano 40 Altre informazioni ✎NOTA x Se si utilizzano viti di lunghezza maggiore alle specifiche standard, le parti interne del prodotto potrebbero danneggiarsi. x Per i supporti a parete non compatibili con le specifiche VESA standard, la lunghezza della vite potrebbe essere diversa a seconda delle corrispondenti specifiche. x Evitare di utilizzare viti incompatibili con le specifiche VESA standard e di assemblarle applicando una forza eccessiva. Il prodotto potrebbe danneggiarsi e procurare lesioni personali in caso di caduta. Samsung non potrà essere ritenuta responsabile per eventuali danni o lesioni personali. x Samsung non potrà essere ritenuta responsabile per eventuali danni al prodotto o lesioni personali conseguenti all'utilizzo di un supporto a parete/piedistallo da tavolo non compatibile con le specifiche o derivanti da un'installazione non eseguita da un tecnico specializzato autorizzato. x Quando occorre installare il prodotto con un supporto a parete, acquistare un supporto che consenta una distanza di 10 cm dalla parete. x Utilizzare un supporto a parete conforme alle specifiche internazionali. Blocco Kensington antifurto Il blocco Kensington non è fornito da Samsung. Si tratta di un dispositivo che consente di bloccare fisicamente il sistema quando viene utilizzato in un luogo pubblico. L'aspetto e il metodo di blocco possono differire dall'illustrazione a seconda del produttore. Per ulteriori informazioni sull'uso corretto, consultare il manuale fornito con il blocco Kensington. ✎Individuare l'icona "K" sulla parte posteriore del display a LED. Lo slot Kensington si trova al di sotto dell'icona "K". Per bloccare il prodotto, attenersi alla procedura seguente: 1. Avvolgere il cavo del blocco Kensington attorno a un oggetto fisso di grandi dimensioni, ad esempio una scrivania o una sedia. 2. Far scorrere l'estremità del cavo con il blocco attraverso l'altra estremità a cappio del cavo stesso. 3. Inserire il dispositivo di blocco nello slot Kensington del prodotto (1). 4. Bloccare il dispositivo. 1 ✎Queste sono indicazioni generiche. Per le istruzioni dettagliate, consultare il manuale dell'utente fornito con il dispositivo di blocco. ✎Il dispositivo di blocco deve essere acquistato separatamente. ✎La posizione dello slot Kensington potrebbe essere diversa a seconda del modello del display a LED.Italiano 41 Altre informazioni Risoluzione del problemi In caso di domande sul display a LED, consultare innanzitutto l'elenco seguente. Se i suggerimenti forniti non risolvono il problema, visitare il sito "www.samsung.com" e fare clic su Supporto o contattare il Call center riportato nell'ultima pagina. Problemi Soluzioni e spiegazioni Qualità dell'immagine Eseguire innanzitutto il Test immagine per verificare che il display a LED visualizzi correttamente l'immagine di prova (selezionare MENU - Supporto - Auto diagnosi - Test immagine). Se l'immagine di prova viene visualizzata correttamente, la scarsa qualità dell'immagine potrebbe essere dovuta alla sorgente o al segnale. L'immagine del display a LED non sembra all'altezza di quella vista in negozio. • Se si utilizza un ricevitore via cavo / set-top box analogico, passare a uno digitale. Utilizzare collegamenti HDMI per ottenere una qualità dell'immagine HD (ad alta definizione). • Utenti di servizi via cavo / satellitari: provare le stazioni HD dal channel line up. • Collegamento antenna: provare le stazioni HD dopo aver eseguito la sintonizzazione automatica. ✎ Molti canali HD trasmettono contenuti SD (a definizione standard) in upscaling. • Regolare la risoluzione di uscita video del ricevitore via cavo / set-top box su 1080i o 720p. • Guardare il display a LED alla distanza minima consigliata in base alle dimensioni dello schermo e alla definizione del segnale. L'immagine è distorta: presenza di macroblocchi, microblocchi, punti e pixelizzazione • La compressione dei contenuti video può causare la distorsione dell'immagine, specialmente quando si tratta di immagini con movimenti rapidi, come nel caso di eventi sportivi o film di azione. • Un segnale debole o di scarsa qualità può causare la distorsione dell'immagine. Non si tratta di un problema del display a LED. • L'utilizzo di telefoni cellulari in prossimità del display a LED (fino a 1 m circa) può causare disturbi dell'immagine in modalità analogica e digitale. Colori o luminosità di bassa intensità. • Regolare le opzioni Immagine nel menu del display a LED. (selezionare Modalità immagine / Colore / Luminosità / Nitidezza). • Regolare l'opzione Risparmio energia nel menu del display a LED (selezionare MENU - Sistema - Soluzione Eco - Risparmio energia). • Provare a reimpostare l'immagine visualizzandola con le impostazioni predefinite (selezionare MENU - Immagine - Reimposta immagine). Presenza di una linea punteggiata sul bordo dello schermo. • Se il formato immagine è impostato su Adatta a schermo, modificarlo impostandolo su 16:9. • Cambiare la risoluzione del ricevitore via cavo / satellitare. Quando si cambiano i canali, l'immagine si blocca oppure risulta distorta o ritardata. • In caso di collegamento a un ricevitore via cavo, provare a reimpostare il ricevitore. Ricollegare il cavo CA e attendere il riavvio del ricevitore. L'operazione potrebbe richiedere fino a 20 minuti. • Impostare la risoluzione di uscita del ricevitore via cavo su 1080i o 720p. Qualità audio Eseguire innanzitutto il Test audio per verificare che l'audio del display a LED funzioni correttamente (selezionare MENU - Supporto - Auto diagnosi - Test audio). Se l'audio è OK, il problema audio potrebbe essere dovuto alla sorgente o al segnale. Assenza di audio o audio troppo basso anche al volume massimo. • Verificare il volume del dispositivo (ricevitore via cavo / satellitare, lettore DVD, Blu-ray e così via) collegato al display a LED. L'immagine è buona ma senza audio. • Se si sta utilizzando un cavo DVI-HDMI, il display a LED non supporta l'audio. • Riavviare il dispositivo collegato ricollegando il relativo cavo di alimentazione. • Se il display a LED è dotato di un connettore per le cuffie, verificare che non vi sia collegato nulla. Gli altoparlanti emettono un rumore anomalo. • Per i collegamenti via antenna o cavo, controllare la potenza del segnale. Un segnale debole può causare la distorsione dell'audio. Nessuna immagine, nessun video Il display a LED non si accende. • Verificare che il cavo di alimentazione CA sia inserito saldamente nella presa a muro e nel display a LED. • Verificare che la presa muro sia funzionante. • Provare a premere il tasto POWER sul display a LED per verificare che il problema non sia il telecomando. Se il display a LED si accende, vedere di seguito "Il telecomando non funziona". Il display a LED si spegne automaticamente. • Verificare che Timer stand-by sia impostato su Off nel menu Ora. • Se il display a LED è collegato a un PC, verificare le impostazioni di alimentazione del PC. • Verificare che il cavo di alimentazione CA sia inserito saldamente nella presa a muro e nel display a LED. • Quando si guarda il display a LED con un collegamento via antenna o cavo, in caso di assenza del segnale l'apparecchio si spegne dopo 10 - 15 minuti.Italiano 42 Altre informazioni Problemi Soluzioni e spiegazioni Assenza di immagine/video. • Controllare i collegamenti dei cavi (rimuovere tutti i cavi collegati al display a LED e ai dispositivi esterni e ricollegarli). • Impostare le uscite video dei dispositivi esterni (ricevitore via cavo/satellitare, lettore DVD, Blu-ray e così via) in modo che i collegamenti corrispondano agli ingressi del display a LED. Ad esempio, se l'uscita di un dispositivo esterno è HDMI, tale uscita deve essere collegata a un ingresso HDMI del display a LED. • Verificare che i dispositivi collegati siano accesi. • Verificare che sia selezionata la sorgente corretta del display a LED premendo il tasto SOURCE sul telecomando del display a LED. • Riavviare il dispositivo collegato ricollegando il relativo cavo di alimentazione. Collegamento RF (cavo / antenna) Il display a LED non riceve tutti i canali. • Verificare che il cavo dell'antenna sia collegato saldamente. • Provare a eseguire la funzione Impostazione (impostazione iniziale) per aggiungere i canali disponibili all'elenco canali. Selezionare MENU - Sistema - Impostazione (impostazione iniziale) e attendere la memorizzazione di tutti i canali disponibili. • Verificare che l'antenna sia posizionata correttamente. L'immagine è distorta: presenza di macroblocchi, microblocchi, punti e pixelizzazione. • La compressione dei contenuti video può causare la distorsione dell'immagine, specialmente quando si tratta di immagini con movimenti rapidi, come nel caso di eventi sportivi o film di azione. • Un segnale debole può causare la distorsione dell'immagine. Non si tratta di un problema del display a LED. Altri problemi L'immagine non viene visualizzata a pieno schermo. • I canali HD presentano delle barre nere sui lati dello schermo quando vengono visualizzati contenuti SD (4:3) in upscaling. • Nella visione di film con proporzioni diverse da quelle del display a LED, compaiono delle barre nere nella parte superiore e inferiore dello schermo. • Regolare le opzioni del formato immagine sul dispositivo esterno o sul display a LED in modo da ottenere una visualizzazione a pieno schermo. Il telecomando non funziona. • Sostituire le batterie del telecomando inserendole con i poli (+/–) nella corretta direzione. • Pulire la finestra di trasmissione del sensore del telecomando. • Puntare il telecomando direttamente verso il display a LED a una distanza di 1,5-1,8 m. Il telecomando del ricevitore via cavo / set-top box non consente di accendere o spegnere il display a LED o di regolare il volume. • Programmare il telecomando del ricevitore via cavo/set-top box in modo che possa controllare il display a LED. Consultare il manuale dell'utente del ricevitore via cavo/set-top box per il codice del display a LED SAMSUNG. Viene visualizzato il messaggio "Modal non supportata". • Verificare la risoluzione supportata del display a LED e regolare di conseguenza la risoluzione di uscita del dispositivo esterno. Il display a LED emette un odore di plastica. • Si tratta di odore normale che svanirà nel corso del tempo. La funzione Informazioni sul segnale del display a LED non è disponibile nel menu Auto diagnosi. • Questa funzione è disponibile solo con i canali digitali con collegamento via antenna / RF / coassiale. Il display a LED è inclinato verso destra o sinistra. • Rimuovere la base del piedistallo dal display a LED e rimontarla. Si riscontrano difficoltà nel montaggio della base del piedistallo. • Verificare che il display a LED sia posizionato su una superficie piana. Se non si riesce a rimuovere le viti dal display a LED, utilizzare un cacciavite magnetico. Il menu Canale è disattivato (non disponibile). • Il menu Canale è disponibile solo se è selezionata la sorgente TV. Le impostazioni si perdono dopo 30 minuti o ogni volta che il display a LED viene spento. • Se il display a LED è in modalità Demo Negozio, le impostazioni audio e immagine verranno reimpostate ogni 30 minuti. Cambiare la modalità Demo Negozio in Uso domestico eseguendo la procedura Impostazione (impostazione iniziale). Premere il tasto SOURCE per selezionare la modalità TV, e accedere a MENU → Sistema → Impostazione (impostazione iniziale) → ENTERE. Si verifica una perdita intermittente del segnale audio o video. • Verificare il collegamento dei cavi e ricollegarli. • La perdita del segnale audio o video può essere dovuta all'utilizzo di cavi eccessivamente rigidi o spessi. Verificare che i cavi siano sufficientemente flessibili da consentire un uso prolungato. Se il display a LED viene montato a parete, si consiglia l'utilizzo di cavi con connettori a 90 gradi. Osservando da vicino il bordo della cornice del display a LED, si notano delle piccole particelle. • Non si tratta di un difetto e fa parte del design del prodotto.Italiano 43 Altre informazioni Problemi Soluzioni e spiegazioni Il menu PIP non è disponibile. • Tale funzione è disponibile solo quando si utilizza una sorgente HDMI. Il display a LED è stato spento, ma dopo 45 minuti si è riacceso. • È normale. Il display a LED attiva da solo la funzione OTA (Over The Antenna) per aggiornare il firmware scaricato durante la visione. Viene visualizzato il messaggio "Segnale criptato" o "Segnale debole/Nessun segnale". • Se si utilizza un modulo CAM (CI/CI+), verificare che sia installato nello slot Common Interface. • Se il problema persiste, estrarre il modulo CAM dal display a LED e reinserirlo nello slot. Si verificano problemi ricorrenti di immagine/audio. • Verificare e cambiare il segnale / la sorgente. È possibile che si verifichi una reazione tra i piedini di gomma della base del piedistallo e la finitura superiore di alcuni mobili. • Per evitare questo problema, utilizzare dei feltrini su tutte le superfici del display a LED a diretto contatto con i mobili. ✎Il pannello è costituito da sotto-pixel la cui produzione richiede una sofisticata tecnologia. Potrebbero tuttavia apparire sullo schermo alcuni pixel più luminosi o scuri. Tali pixel non influiscono in alcun modo sulle prestazioni del prodotto. ¦ Conservazione e manutenzione ✎Se si attaccano degli adesivi sullo schermo del display a LED, una volta rimossi, resteranno dei residui. Pulirli per guardare il display a LED. ✎La parte esterna e lo schermo del prodotto possono graffiarsi durante la pulizia. Per evitare di produrre graffi, pulire la parte esterna e lo schermo con attenzione utilizzando l'apposito panno fornito in dotazione o un altro panno morbido. Non spruzzare acqua o detergenti direttamente sul prodotto. L'eventuale penetrazione di liquidi nel prodotto potrebbe causare guasti, scosse elettriche o un incendio. Pulire il prodotto con un panno morbido leggermente imbevuto d'acqua. [ATTENZIONE Se l'altezza " A" su un lato è diversa da quella sull'altro lato, regolare le due altezze.Italiano 44 Altre informazioni ¦ Licenze TheaterSound HD, SRS and the symbol are trademarks of SRS Labs, Inc. TheaterSound HD technology is incorporated under licence from SRS Labs, Inc. Prodotto su licenza di Dolby Laboratories. Dolby e il simbolo di doppia D sono marchi di Dolby Laboratories. 2.0 Channel Prodotto su licenza in base ai brevetti statunitensi n. 5.956.674, 5.974.380, 6.487.535 e altri brevetti statunitensi e mondiali registrati e in corso di registrazione. DTS, il simbolo e DTS insieme al simbolo sono marchi registrati e DTS 2.0 Channel è un marchio di DTS, Inc. Software incluso nel prodotto. © DTS, Inc. Tutti i diritti riservati. (Disponibile solo nella serie TB300) Prodotto su licenza in base ai brevetti statunitensi n. 5.451.942, 5.956.674, 5.974.380, 5.978.762, 6.487.535 e altri brevetti statunitensi e mondiali registrati e in corso di registrazione. DTS e il simbolo sono marchi registrati. DTS 2.0+ Digital Out e i loghi DTS sono marchi di DTS, Inc. Software incluso nel prodotto. © DTS, Inc. Tutti i diritti riservati. (Disponibile solo nella serie TB350) Avviso di licenza open source In caso di utilizzo di software open source, la relativa licenza è disponibile nel menu del prodotto. L'avviso di licenza open source è soltanto in lingua inglese. ¦ Smaltimento di rifiuti di apparecchiature elettriche ed elettroniche Corretto smaltimento del prodotto (Applicabile nei paesi dell'Unione Europea e in altri paesi europei con sistema di raccolta differenziata) Questo marchio riportato sul prodotto, sugli accessori e sulla documentazione indica che il prodotto e i relativi accessori elettronici (ad esempio caricabatterie, cuffie e cavo USB) non devono essere smaltiti insieme ai normali rifiuti domestici al termine del ciclo di vita. Per evitare eventuali danni all'ambiente e alla salute causati da uno smaltimento inadeguato, separare il prodotto e i suddetti accessori dagli altri tipi di rifiuti e riciclarli in maniera responsabile per favorire il riutilizzo sostenibile delle risorse materiali. Gli utenti domestici possono contattare il rivenditore presso il quale è stato acquistato il prodotto o l'ufficio locale preposto per informazioni dettagliate sulle modalità e i punti di raccolta per il riciclaggio nel rispetto dell'ambiente. Gli utenti aziendali possono contattare il proprio fornitore e verificare i termini e le condizioni del contratto di acquisto. Questo prodotto e i relativi accessori elettronici non devono essere smaltiti unitamente ad altri rifiuti commerciali. Corretto smaltimento delle batterie del prodotto (Applicabile nei paesi dell'Unione Europea e in altri paesi europei con sistemi di conferimento differenziato delle batterie) Questo marchio riportato sulle batterie, sul manuale o sulla confezione indica che le batterie non devono essere smaltite insieme ai normali rifiuti domestici al termine del ciclo di vita. Laddove presenti, i simboli chimici Hg, Cd o Pb indicano che le batterie contengono mercurio, cadmio o piombo in quantità superiore ai livelli di riferimento della direttiva CE 2006/66. Se le batterie non vengono smaltite correttamente, tali sostanze possono causare danni alla salute o all'ambiente. Per proteggere le risorse naturali e favorire il riutilizzo dei materiali, separare le batterie dagli altri tipi di rifiuti e riciclarle servendosi del sistema di conferimento gratuito delle batterie della propria area di residenza.Italiano 45 Altre informazioni Specifiche Caratteristiche ambientali Funzionamento Temperatura: 10°C ~ 40°C (50°F ~ 104°F) Umidità: 10 % ~ 80 %, senza condensa Immagazzinamento Temperatura: -20°C ~ 45°C (-4°F ~ 113°F) Umidità: 5 % ~ 95 %, senza condensa Inclinazione -1°(±2°) ~ 20°(±2°) Sistema del display a LED Analogico: B/G, D/K, L, I (in base alla nazione selezionata) Digitale: DVB-T / DVB-C Sistema colore/video Analogico: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60 Digitale: MPEG-2 MP@ML, MPEG-4, H.264 / AVC MP@L3, MP@L4.0, HP@L4.0 Sistema audio BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC HDMI IN Video: 1080 24p, 1080p, 1080i, 720p, 576p, 480p Audio: PCM lineare a 2 canali 32/44.1/48 kHz, 16/20/24 bit, Nome modello T19B300 T22B300 T24B300 T27B300 Dimensione schermo (diagonale) 18,5 pollici (47 cm) 21,5 pollici (55 cm) 23,6 pollici (60 cm) 27 pollici (69 cm) Risoluzione schermo 1366 x 768 @ 60 Hz 1920 x 1080 @ 60 Hz Audio (uscita) 5 W × 2 Dimensioni (L x P x A) Senza piedistallo 444,7 x 52,6 x 278,2 mm 509,7 x 51,5 x 318,2 mm 569,2 x 53,4 x 349,4 mm 643,3 x 53,4 x 397,9 mm Con piedistallo 444,7 x 187 x 356,4 mm 509,7 x 195 x 396,6 mm 569,2 x 195 x 428 mm 643,3 x 252 x 476,5 mm Peso Senza piedistallo 2,95 kg 3,7 kg 4,25 kg 5,1 kg Con piedistallo 3,2 kg 3,95 kg 4,5 kg 5,6 kg Nome modello T22B350 T23B350 T24B350 Dimensione schermo (diagonale) 21,5 pollici (55 cm) 23 pollici (58 cm) 24 pollici (61 cm) Risoluzione schermo 1920 x 1080 @ 60 Hz Audio (uscita) 5 W × 2 Dimensioni (L x P x A) Senza piedistallo 509,7 x 51,5 x 318,2 mm 547,5 x 53,4 x 337,9 mm 569,2 x 53,4 x 349,4 mm Con piedistallo 509,7 x 195 x 396,6 mm 547,5 x 195 x 416,1 mm 569,2 x 195 x 428 mm Peso Senza piedistallo 3,7 kg 3,25 kg 4,15 kg Con piedistallo 3,95 kg 3,5 kg 4,45 kg ✎NOTA x Il design e le specifiche sono soggette a modifica senza preavviso, x Per informazioni sull'alimentazione e sul consumo di energia, vedere l'etichetta applicata sul prodotto, x Alcuni modelli potrebbero non essere disponibili per l'acquisto a seconda della regione, x Se non è presente un interruttore di disattivazione dell'alimentazione, il consumo di energia è pari a "0" solo quando si scollega il cavo di alimentazione, x La funzione DPM (Display Power Management) non è operativa se utilizzata unitamente alla porta HDMI IN (DVI) del prodotto,Italiano 46 Altre informazioni Diagrammi a blocchiContatta SAMSUNG WORLDWIDE In caso di domande o commenti sui prodotti Samsung, contattare il centro assistenza clienti SAMSUNG. Paese Centro assistenza clienti Sito Web EUROPE ALBANIA 42 27 5755 http://www.samsung.com AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) http://www.samsung.com BELGIUM 02-201-24-18 http://www.samsung.com/be (Dutch) http://www.samsung.com/be_fr (French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 http://www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com Samsung Electronics Czech and Slovak, s.r.o.,Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8 DENMARK 70 70 19 70 http://www.samsung.com FINLAND 030 - 6227 515 http://www.samsung.com FRANCE 01 48 63 00 00 http://www.samsung.com GERMANY 01805 - SAMSUNG (726-7864, € 0,14/Min) http://www.samsung.com CYPRUS From landline : 8009 4000 http://www.samsung.com GREECE From landline : 80111-SAMSUNG (7267864) From landline & mobile : (+30)210 6897691 http://www.samsung.com HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.com ITALIA 800-SAMSUNG (726-7864) http://www.samsung.com KOSOVO +381 0113216899 http://www.samsung.com LUXEMBURG 261 03 710 http://www.samsung.com MACEDONIA 023 207 777 http://www.samsung.com MONTENEGRO 020 405 888 http://www.samsung.com NETHERLANDS 0900-SAMSUNG (0900-7267864) ( € 0,10/Min) http://www.samsung.com NORWAY 815-56 480 http://www.samsung.com POLAND 0 801-1SAMSUNG (172-678) +48 22 607-93-33 http://www.samsung.com PORTUGAL 80820-SAMSUNG (808207267) http://www.samsung.com RUMANIA From landline : 08010-SAMSUNG (7267864) From landline & mobile : (+40)21 206 01 10 http://www.samsung.com SERBIA 0700 SAMSUNG (0700 726 7864) http://www.samsung.com SLOVAKIA 0800 - SAMSUNG (0800-726 786) www.samsung.com/sk SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) http://www.samsung.com/ch http://www.samsung.com/ch_fr (French) U.K 0330 SAMSUNG (7267864) http://www.samsung.com EIRE 0818 717100 http://www.samsung.com LITHUANIA 8-800-77777 http://www.samsung.com LATVIA 8000-7267 http://www.samsung.com ESTONIA 800-7267 http://www.samsung.com TURKEY 444 77 11 http://www.samsung.com CIS RUSSIA 8-800-555-55-55 http://www.samsung.com GEORGIA 8-800-555-555 http://www.samsung.com ARMENIA 0-800-05-555 http://www.samsung.com AZERBAIJAN 088-55-55-555 http://www.samsung.com KAZAKHSTAN 8-10-800-500-55-500(GSM: 7799) http://www.samsung.com UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.com KYRGYZSTAN 00-800-500-55-500 http://www.samsung.comPaese Centro assistenza clienti Sito Web TADJIKISTAN 8-10-800-500-55-500 http://www.samsung.com MONGOLIA http://www.samsung.com UKRAINE 0-800-502-000 http://www.samsung.com/ua http://www.samsung.com/ua_ru BELARUS 810-800-500-55-500 http://www.samsung.com MOLDOVA 00-800-500-55-500 http://www.samsung.com ASIA PACIFIC AUSTRALIA 1300 362 603 http://www.samsung.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com CHINA 400-810-5858 http://www.samsung.com HONG KONG (852) 3698 - 4698 http://www.samsung.com/hk http://www.samsung.com/hk_en/ INDIA 1800 1100 11 3030 8282 1800 3000 8282 1800 266 8282 http://www.samsung.com INDONESIA 0800-112-8888 021-5699-7777 http://www.samsung.com JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com PHILIPPINES 1-800-10-SAMSUNG (726-7864) for PLDT 1-800-3-SAMSUNG(726-7864) for Digitel 1-800-8-SAMSUNG(726-7864) for Globe02-5805777 http://www.samsung.com SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com THAILAND 1800-29-3232 02-689-3232 http://www.samsung.com TAIWAN 0800-329-999 0266-026-066 http://www.samsung.com VIETNAM 1 800 588 889 http://www.samsung.com MIDDLE EAST IRAN 021-8255 http://www.samsung.com OMAN 800-SAMSUNG(726-7864) http://www.samsung.com KUWAIT 183-2255 http://www.samsung.com BAHRAIN 8000-4726 http://www.samsung.com EGYPT 08000-726786 http://www.samsung.com JORDAN 800-22273 http://www.samsung.com MOROCCO 080 100 2255 http://www.samsung.com SAUDI ARABIA 9200-21230 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com AFRICA CAMEROON 7095- 0077 http://www.samsung.com COTE D’ IVOIRE 8000 0077 http://www.samsung.com GHANA 0800-10077 http://www.samsung.com 0302-200077 KENYA 0800 724 000 http://www.samsung.com NIGERIA 0800-726-7864 http://www.samsung.com SENEGAL 800-00-0077 http://www.samsung.com SOUTH AFRICA 0860-SAMSUNG(726-7864) http://www.samsung.com TANZANIA 0685 88 99 00 http://www.samsung.com UGANDA 0800 300 300 http://www.samsung.com © 2012 Samsung Electronics Co., Ltd. Tutti i diritti riservati. BN46-00196C-03 E-MANUAL Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model __________ Serial No.____________Sommaire Réglage des canaux • Utilisation du bouton INFO (Guide Maintenant et Après) 1 • Utilisation du menu Canal 2 • Nouvelle recherche des chaînes 17 Fonctions de base • Changement du mode Image prédéfini 27 • Réglages des paramètres de l’image 28 • Modification des options d’image 38 • Changement du mode Son prédéfini 45 • Réglage des paramètres sonores 46 • Sélection du mode son 56 Fonctions de préférence • Connexion au réseau 57 • Configuration du réseau câblé 71 • Configuration du réseau sans fil 77 • Gestion des périphériques connectés au réseau 86 • Exécution de la configuration initiale 90 • Réglage de l’heure 91 • Utilisation de la veille 93 • Réglage de la minuterie de mise en marche / arrêt 94 • Verrouillage des programmes 98 • Incrustation d’image (PIP) 100 • Solutions économiques 102 • Autres fonctionnalités 105 • Menu Assistance 116 Fonctions avancées • Utilisation de la fonction 3D 124 • Utilisation du contenu multimedia 135 • Connexion d'un périphérique USB 136 • Connexion à l'ordinateur par le biais du réseau 142 • Affichage 145 • Contenu multimedia - Fonctions supplé- mentaires 156 • Utilisation des fonctions DLNA 160 Informations supplémentaires • Fonction Télétexte 166 • Verrou antivol Kensington 170 • Emplacement pour interface commune pour les connexions 172 • Résolution des problèmes 174 • License 191▶ Français ❑ Utilisation du bouton INFO (Guide Maintenant et Après) L'affichage identifie la chaîne en cours et l'état de certains paramètres audio et vidéo. Le Guide Maintenant et Après affiche des informations quotidiennes sur les programmes de télévision pour chaque chaîne en fonction de l'heure de diffusion. N Lorsque vous appuyez sur le bouton a (Information), les détails du programme sont affichés. ● Faites défiler à l'aide des boutons ◄ et ► pour afficher des informations sur le programme de votre choix, tout en regardant la chaîne actuelle. ● Faites défiler à l'aide des boutons ▲ et ▼ pour afficher des informations sur d'autres chaînes. Pour accéder à la chaîne actuellement sélectionnée, appuyez sur le bouton ENTERE. Réglage des canaux◀ ▶ ❑ Utilisation du menu Canal O MENUm → Assistance → Accueil contenu → ENTERE Appuyez sur le bouton CONTENT pour sélectionner le menu de votre choix. L'écran correspondant s'affiche alors. ■ Liste des chaînes Vous pouvez afficher les informations sur les chaînes : Tous, TV, Radio, Données/autres, Analogique ou Favoris 1-5. N Lorsque vous appuyez sur la touche CH LIST de la télécommande, l'écran Liste des chaînes s'affiche. Liste des chaînes Guide AllShare Play Gestionnaire prog. Source Accueil contenu R Retour * L'image affichée peut varier en fonction du modèle. Français◀ ▶ ● Tous: affiche toutes les chaînes actuellement disponibles. ● TV: affiche toutes les chaînes de télévision actuellement disponibles. ● Radio: affiche toutes les stations de radio actuellement disponibles. ● Données/autres: affiche toutes les chaînes MHP ou autres actuellement disponibles. ● Analogique: affiche toutes les chaînes analogiques actuellement disponibles. ● Favoris 1-5: affiche toutes les chaînes favorites. N Pour visualiser les chaînes favorites que vous avez ajoutées, appuyez sur le bouton CH LIST et utilisez le bouton L (Mode CH) pour accéder à l'option Favoris 1-5. Français◀ ▶ N Utilisation des touches de commande avec la Liste des chaînes. ● T (Outils): affiche le menu d'options. ● L (Mode CH / Canal): permet d'accéder aux options Tous, TV, Radio, Données/autres, Analogique ou Favoris 1-5. N Lorsque vous sélectionnez Vue progr. dans le menu T (Outils), vous pouvez accéder à d'autres chaînes à l'aide du bouton L (Canal). ● E (Regarder / Information): vous permet de regarder la chaîne que vous avez sélectionnée. / affiche des détails sur le programme sélectionné. ● k (Page): permet de passer à la page suivante ou précédente. Français◀ ▶ Comment utiliser l'affichage des programmes dans la liste des chaînes (chaînes numériques uniquement) Lorsque vous configurez la fonction Programmer visionnage dans Liste des chaînes, vous pouvez uniquement définir le programme dans Vue progr.. 1. Appuyez sur le bouton CH LIST, puis sélectionnez la chaîne numérique souhaitée. 2. Appuyez sur la touche TOOLS, puis sélectionnez l'option Vue progr.. La liste des programmes de cette chaîne s'affiche alors. 3. Appuyez sur les boutons ▲ / ▼ pour sélectionner le programme souhaité, puis appuyez sur le bouton ENTERE (Information) ou INFO. 4. Sélectionnez Programmer visionnage, puis appuyez sur le bouton ENTERE lorsque vous avez terminé. N Si vous souhaitez désactiver la fonction Programmer visionnage, suivez les étapes 1 à 3. Sélectionnez Annuler programmation. Français◀ ▶ Définissez chaque chaîne à l'aide des options du menu Utilisation du menu Optiont Liste des chaînes (Vue progr., Modif. favoris, Verrouil./Déverr., Modifi. nom de chaîne, Modif. num. chaîne, Supprimer, Information, Trier, Mode édit.). Les options de menu peuvent varier selon l'état de la chaîne. 1. Sélectionnez une chaîne et appuyez sur le bouton TOOLS. 2. Sélectionnez une fonction et modifiez ses réglages. Français◀ ▶ ● Vue progr.: affiche le programme lorsqu'une chaîne numérique est sélectionnée. ● Modif. favoris: permet de définir comme favorites les chaînes que vous regardez souvent. Vous pouvez ajouter ou retirer les chaînes sélectionnées de Favoris 1-5. 1. Sélectionnez Modif. favoris, puis appuyez sur le bouton ENTERE. 2. Appuyez sur le bouton ENTERE pour sélectionner l'option Favoris 1-5, puis appuyez sur le bouton OK. N Vous pouvez affecter une chaîne favorite qui sera incluse dans la liste Favoris 1-5. Français◀ ▶ ● Verrouil./Déverr.: vous pouvez verrouiller une chaîne afin qu'elle ne puisse être ni sélectionnée, ni visualisée. N Cette fonction n'est disponible que si l'option Verr. chaîne est définie sur Marche. N L’écran de saisie du code PIN apparaît. Entrez votre code PIN à quatre chiffres. Modifiez le code PIN à l’aide de l’option Modifier PIN. ● Modifi. nom de chaîne (chaînes analogiques uniquement): attribuez le nom de votre choix à la chaîne. Français◀ ▶ ● Modif. num. chaîne: modifiez le numéro en appuyant sur les boutons numériques appropriés. N Il se peut que les fonctions Modifi. nom de chaîne et Modif. num. chaîne ne soient pas prises en charge dans certaines régions. ● Supprimer: vous pouvez supprimer une chaîne afin d'afficher celles de votre choix. ● Information: affiche des détails sur le programme sélectionné. ● Trier: permet de changer l'ordre des chaînes classées par numéro ou par nom. Français◀ ▶ ● Mode édit.: vous pouvez sélectionner les chaînes de votre choix et les modifier. Utilisation du menu Optiont Définissez chaque chaîne à l'aide des options du menu (Modif. favoris, Verrouil./Déverr., Supprimer, Désélectionner, Sélectionner tout). 1. Appuyez sur le bouton TOOLS dans l'écran Liste des chaînes, puis sélectionnez Mode édit.. Une coche apparaît à gauche de la chaîne. 2. Appuyez sur les boutons ▲/▼ pour sélectionner la chaîne de votre choix, puis sur ENTERE. Le symbole (c) indique la chaîne que vous avez sélectionnée. N Vous pouvez sélectionner plusieurs chaînes. N Appuyez à nouveau sur le bouton ENTERE pour annuler la sélection de la chaîne. 3. Appuyez sur le bouton TOOLS, puis sélectionnez une fonction et modifiez ses paramètres. Français◀ ▶ ● Modif. favoris: permet de définir comme favorites les chaînes sélectionnées que vous regardez souvent. N L'écran Modif. favoris comprend cinq groupes (Favoris 1, Favoris 2, etc.). Vous pouvez ajouter une chaîne favorite à n'importe lequel de ces groupes. Appuyez sur les boutons ▲/▼ pour sélectionner un groupe. ● Verrouil./Déverr.: vous pouvez verrouiller une chaîne afin qu'elle ne puisse être ni sélectionnée, ni visualisée. N Cette fonction n'est disponible que si l'option Verr. chaîne est définie sur Marche. N L’écran de saisie du code PIN apparaît. Entrez votre code PIN à quatre chiffres. Modifiez le code PIN à l’aide de l’option Modifier PIN. ● Supprimer: vous pouvez supprimer une chaîne afin d'afficher celles de votre choix. ● Désélectionner: permet de désélectionner les chaînes sélectionnées. ● Sélectionner tout: permet de sélectionner toutes les chaînes de la liste des chaînes. Français◀ ▶ ■ Guide Les informations du Guide électronique des programmes (EPG) sont fournies par les diffuseurs. Les programmes planifiés fournis par les diffuseurs vous permettent de planifier les émissions que vous souhaitez regarder, de telle sorte que le téléviseur change automatiquement de chaîne à l'heure indiquée. Des entrées de programmes peuvent être vides ou ne pas être à jour en raison de l'état d'une chaîne. Die Musik-Show DTV Air 825 NDR FERNSEHEN 19:15 - 20:40 Dani est effondrée lorsque Scot lui fait part de son opinion ... 825 NDR FERNSEHEN 18:15 Sam 1er mai Vue chaînes - Tous Aujourd'hui ▲ 821 Kanal 5 822 M6 823 MDR FERNSEHEN 824 Mediashopping 825 NDR FERNSEHEN ▼ 826 NT1 20:00 20:30 21:00 21:30 Aucune information Aucune information Aucune information Musik fur Sie MD... Ein Schloss am ... Aucune information a Gest. prog b -24 heures { +24 heures } Mode CH `Information❑❑ k Page❑❑❑EProgrammer 1 2 3 4 5 6 7 Guide Die Musik-Show Die NDR Quizshow Sportclub live * L'image affichée peut varier en fonction du modèle. Français◀ ▶ 1 a Rouge (Gest. prog): permet d'accéder aux programmes réservés dans Gest. prog. 2 b Vert (-24 heures): affiche la liste des programmes qui seront diffusés dans les 24 heures. 3 { Jaune (+24 heures): affiche la liste des programmes qui seront diffusés dans plus de 24 heures. 4 } Bleu (Mode CH): permet de sélectionner le type des chaînes à afficher dans la fenêtre Liste des chaînes. (Tous, TV, Radio, Donn/autre, Favoris 1-5) Français◀ ▶ 5 `(Information): affiche des détails sur le programme sélectionné. 6 k (Page): permet de passer à la page suivante ou précédente. 7 E (Regarder / Programmer) ● si vous sélectionnez le programme en cours, vous pouvez le regarder. ● Si vous sélectionnez un programme à venir, vous pouvez le réserver. Pour annuler la programmation, appuyez de nouveau sur le bouton ENTERE et sélectionnez Annuler progr.. Français◀ ▶ ■ Gestionnaire prog. Vous pouvez programmer l'affichage automatique d'une chaîne de votre choix à l'heure prévue. De plus, vous pouvez voir, modifier ou supprimer une chaîne que vous avez réservée. Avant d'utiliser cette fonction, vous devez régler l'heure. Définissez chaque chaîne à l'aide des options du menu ( Utilisation du menu Optiont Annuler programmation, Modifier le programme, Programmer manuellement, Afficher le guide). 1. Appuyez sur le bouton TOOLS pour sélectionner Programmer manuellement. N Vous pouvez appuyer sur le a (Programmer manuellement) directement sur l'écran Gestionnaire prog.. 2. Appuyez sur ◄/►/▲/▼ ou sur les touches numériques pour définir les options Antenne, Canal, Répétition, Date, Heure de début. ● Antenne: permet de sélectionner le signal de diffusion souhaité. ● Canal: permet de sélectionner la chaîne souhaitée. Français◀ ▶ ● Répétition: sélectionnez Une fois, Manuel, Sam~Dim, Lun~Ven ou Quotid. suivant vos besoins. Si vous sélectionnez Manuel, vous pouvez définir le jour de votre choix. N Le symbole (c) indique le jour sélectionné. ● Date: permet de définir la date de votre choix. N Cette option est disponible lorsque vous sélectionnez Une fois sous Répétition. ● Heure de début: permet de définir l'heure de début de votre choix. N Pour modifier ou annuler la programmation, sélectionnez le programme réservé sous Listes des prog.. Appuyez sur le bouton TOOLS, puis sélectionnez Modifier programmation ou Annuler programmation. N Si vous sélectionnez Afficher le guide, l'écran Guide s'affiche. Français◀ ▶ ❑ Nouvelle recherche des chaînes ■ O Antenne MENUm (Hertzien / Câble) → Canal → Antenne t → ENTERE Avant que votre téléviseur ne puisse commencer à mémoriser les chaînes disponibles, vous devez spécifier le type de source du signal connecté au téléviseur (c'est-à-dire un système Hertzien ou Câble). Français◀ ▶ ■ Pays (en fonction du pays) O MENUm → Canal → Pays → ENTERE L’écran de saisie du code PIN apparaît. Entrez votre code PIN à quatre chiffres. ● Chaîne numérique: modifiez le pays pour obtenir les chaînes numériques qui y sont diffusées. ● Chaîne analogique: modifiez le pays pour obtenir les chaînes analogiques qui y sont diffusées. Français◀ ▶ ■ Recherche automatique (en fonction du pays) O MENUm → Canal → Recherche automatique → ENTERE Recherche automatiquement une chaîne et l'enregistre dans le téléviseur. N Il est possible que les numéros de programme attribués automatiquement ne correspondent pas aux numéros de programme souhaités ou réels. Si une chaîne est verrouillée, la fenêtre de saisie du code PIN s'affiche. ● Recherche automatique Hertzien / Câble: permet de sélectionner la source d'antenne à mémoriser. Numér. et Anal. / Numérique / Analogique: permet de sélectionner la source de chaîne à mémoriser. Français◀ ▶ Lorsque la source d'antenne est réglée sur Hertzien ou Câble : Lors de la sélection de Câble → Numér. et Anal. ou Numérique: indiquer une valeur pour la recherche des chaînes câblées. – Sélection opérateur (en fonction du pays): sélecionne un fournisseur de diffusion par câble. – Mode de rech. (Complet / Réseau / Quick): permet de rechercher toutes les chaînes dont les stations émettent et les mémorise. N Si vous sélectionnez Quick, vous pouvez définir Réseau, ID réseau, Fréquence, Modulation et Taux de symbole manuellement en appuyant sur les boutons numériques de la télécommande. – Réseau (Auto. / Manuel): permet de sélectionner le mode de réglage ID réseau Auto ou Manuel. – ID réseau: si Réseau est défini sur Manuel, vous pouvez configurer un ID réseau à l'aide des touches numériques. Français◀ ▶ – Fréquence: affiche la fréquence correspondant à la chaîne. (Varie d'un pays à l'autre.) – Modulation: affiche les valeurs de modulation disponibles. – Taux de symbole: affiche les taux de symboles disponibles. ● Option de rech. de câble (Varie d'un pays à l'autre et pour les chaînes câblées uniquement.) Définit des options de recherche supplémentaires, telles que la fréquence et le taux de symboles pour la recherche de réseaux câblés. Fréq. de départ / Fréquence de fin.: définit la fréquence de départ ou de fin (différente dans chaque pays). Taux de symbole: affiche les taux de symboles disponibles. Modulation: affiche les valeurs de modulation disponibles. Français◀ ▶ ■ Recherche manuelle O MENUm → Canal → Recherche manuelle → ENTERE Recherche manuellement une chaîne et la mémorise dans le téléviseur. N Si une chaîne est verrouillée, la fenêtre de saisie du code PIN s'affiche. N En fonction de la source des chaînes, il se peut que la fonction Recherche manuelle soit prise en charge. Lorsque la source d'antenne est réglée sur Hertzien ou Câble : ● Réglage des chaînes numériques: recherche manuellement une chaîne numérique et la mémorise dans le téléviseur. Appuyez sur le bouton Nouveau pour lancer la recherche des chaînes numériques. Au terme de la recherche, les chaînes de la liste sont mises à jour. – Lorsque vous sélectionnez Antenne → Hertzien: Canal, Fréquence, Bande passante – Lorsque vous sélectionnez Antenne → Câble: Fréquence, Modulation, Taux de symbole Français◀ ▶ ● Réglage des chaînes analogiques: recherche une chaîne analogique. Appuyez sur le bouton Nouveau pour démarrer la recherche des chaînes en réglant les valeurs Programme, Système de Couleur, Système Sonore, Canal, Rech.. N Mode Canal – P (mode de programme) A la fin du réglage, des numéros de position compris entre P0 et P99 sont attribués aux stations de radiodiffusion de votre région. Dans ce mode, vous pouvez sélectionner une chaîne en saisissant son numéro de position. – C (mode de canal Hertzien) / S (mode de canal Câble) ces deux modes vous permettent de sélectionner une chaîne en entrant le numéro attribué à chaque chaîne câblée ou station de radiodiffusion hertzienne. Français◀ ▶ ■ Transf. liste chaînes (en fonction du pays) O MENUm → Canal → Transf. liste chaînes → ENTERE Importe ou exporte la carte des chaînes. Vous devez connecter un périphérique de stockage USB pour utiliser cette fonction. N L'écran de saisie du code PIN s'affiche. Entrez votre code PIN à quatre chiffres. ● Importer depuis le périphérique USB: importer la liste des chaînes depuis le périphérique USB. ● Exporter vers le périphérique USB: exporter la liste des chaînes vers le périphérique USB. Français◀ ▶ ■ Réglage fin (chaînes analogiques uniquement) O MENUm → Canal → Réglage fin → ENTERE Si le signal est faible ou déformé, vous devez effectuer manuellement un réglage fin de la chaîne. N Les chaînes qui ont fait l'objet d'un réglage fin sont indiquées par un astérisque "*". N Pour réinitialiser le réglage fin, sélectionnez Réinit.. Français◀ ▶ ■ Modif. num. chaîne (Désactiver / Activer) (en fonction du pays) O MENUm → Canal → Modif. num. chaîne → ENTERE Utilisez cette option pour modifier le numéro des chaînes. Lorsque vous modifiez des numéros, les informations des chaînes ne sont pas mises à jour automatiquement. Français◀ ▶ ❑ Changement du mode Image prédéfini O MENUm → Image → Mode Image → ENTERE ■ Sélectionnez le type d’image que vous préférez. Mode Imaget N Si vous connectez un PC, vous ne pouvez modifier que Loisirs et Standard. ● Dynamique: adapté à un environnement lumineux. ● Standard: adapté à un environnement normal. ● Naturel pour les téléviseurs LED de la série 5 de 32 pouces et supérieure : permet de réduire la fatigue oculaire. ● Cinéma: convient au visionnage de films dans une pièce sombre. ● Loisirs: adapté au visionnage de films et de jeux vidéo. N Cette option n’est disponible que si vous connectez un PC. Fonctions de base Français◀ ▶ ❑ Réglages des paramètres de l’image ■ Samsung MagicAngle pour les téléviseurs LED de la série 4 de 19 pouces et de la série 5 de 22 pouces O MENUm → Image → Samsung MagicAngle → ENTERE Ajustez l’angle de visualisation afin d’optimiser la qualité d’image en fonction de votre angle de vue. ● Samsung MagicAngle: lorsque vous visionnez l'écran d'un point de vueinférieur ou supérieur à celui-ci, vous pouvez obtenir une qualité d'image similaire à celle que vous auriez en face de l'écran, et ce en le réglant sur le mode approprié à chaque position. Arrêt: sélectionnez cette option pour la vue de face. Mode Penché: sélectionnez ce bouton lorsque vous vous situez d’un point de vue légèrement inférieur à l’écran. Mode Debout: sélectionnez cette option pour une vue supérieure. ● Mode: règle l'angle de visualisation de l'écran. N Lorsque l'option Samsung MagicAngle est définie sur Mode Penché ou Mode Debout, la fonction Gamma n'est pas disponible. Français◀ ▶ ■ Rétroéclairage pour les téléviseurs LED, LCD / Lum. Cellules pour les téléviseurs plasma / Contraste / Luminosité / Netteté / Couleur / Teinte (V/R) Votre téléviseur dispose de plusieurs options de réglage pour le contrôle de la qualité d’image. N REMARQUE ● La fonction Teinte (V/R) n’est pas disponible dans les modes TV, Ext., AV analogiques du système PAL. Le modèle LCD 420 ne prend pas en charge le mode AV, Composant ● Lors de la connexion à un ordinateur, vous pouvez uniquement apporter des modifications aux options Rétroéclairage pour les téléviseurs LED, LCD / Lum. Cellules pour les téléviseurs plasma , Contraste, Luminosité et Netteté. ● Les paramètres peuvent être réglés et mémorisés pour chaque dispositif externe connecté au téléviseur. ● La réduction de la luminosité de l’image se traduit par une consommation d’énergie moindre. Français◀ ▶ ■ Réglage de l’écran O MENUm → Image → Réglage de l’écran → ENTERE Définissez les différentes options d'image (par exemple, le format de l'image et le rapport de format). ● Format de l'image: il se peut que votre décodeur câble / récepteur satellite dispose de son propre jeu de tailles d’écran. Il est toutefois vivement conseillé d’utiliser le mode 16:9. 16:9 Auto: règle automatiquement la taille de l'image sur le format 16:9. 16:9: règle l'image en mode large, c'est-à-dire en 16:9. Zoom large: agrandit l’image à une taille supérieure à 4:3. N Réglez la Position à l’aide des boutons ▲, ▼. Français◀ ▶ Zoom: agrandit l’image en 16:9 (dans le sens vertical) pour l’adapter à la taille de l’écran. N Réglez la Zoom ou la Position à l’aide des boutons ▲, ▼. 4:3: règle l'image en mode normal, c'est-à-dire en 4:3. N Ne regardez pas un film au format 4:3 pendant une période prolongée. Les traces de bordures situées sur la gauche, sur la droite et au centre de l’écran peuvent donner lieu au phénomène de rémanence (brûlure d’écran) non couvert par la garantie. Adapter à l’écran: affiche l’intégralité de l’image sans coupure lors de l’entrée de signaux HDMI (720p / 1080i / 1080p) ou Composant (1080i / 1080p). Le modèle LCD 420 ne prend pas en charge le mode AV, Composant Français◀ ▶ Vue intell. 1 pour les téléviseurs LED de la série 5 de 32 pouces et supérieure : permet de réduire la taille de l'écran de 50%. Vue intell. 2 pour les téléviseurs LED de la série 5 de 32 pouces et supérieure : permet de réduire la taille de l'écran de 25%. N REMARQUE ● L'option Vue intell. 1 est uniquement activée en mode HDMI. ● L'option Vue intell. 2 est uniquement activée avec les modes DTV et HDMI. ● Le format de l'image peut varier en fonction de la résolution d'entrée en cas de lecture du contenu à l'aide de l'option Vidéos sous Media Play. ● Position: permet de régler la position de l'image. Cette option est uniquement disponible avec la fonction Adapter à l’écran ou Zoom large. Français◀ ▶ ● Zoom/Position: permet de régler la taille et la position de l'image. Cette option est uniquement disponible avec la fonction Zoom. N REMARQUE ● Après avoir sélectionné Adapter à l’écran en mode HDMI (1080i / 1080p) ou Composant (1080i / 1080p), il se peut que vous deviez centrer l’image Le modèle LCD 420 ne prend pas en charge le mode AV, Composant : 1. Appuyez sur le bouton ▲ ou ▼ pour sélectionner Position. 2. Appuyez sur le bouton ENTERE. 3. Appuyez sur le bouton ▲, ▼, ◄ ou ► pour déplacer l’image. ● Les options de taille de l’image peuvent varier en fonction de la source d’entrée. ● Si vous souhaitez réinitialiser la position que vous avez réglée, sélectionnez l'option Réinit. de l'écran Position. L'image est alors définie sur sa position par défaut. Français◀ ▶ ● Les options disponibles peuvent varier en fonction du mode sélectionné. ● En mode PC, seuls les modes 16:9 et 4:3 peuvent être définis. ● Les paramètres peuvent être réglés et mémorisés pour chaque dispositif externe connecté à une entrée du téléviseur. ● Si vous utilisez la fonction Adapter à l’écran avec l’entrée HDMI 720p, une ligne sera coupée en haut, en bas, à gauche et à droite, comme c’est le cas avec la fonction Overscan. ● Taille d'écran 4:3 (16:9 / Zoom large / Zoom / 4:3): disponible uniquement lorsque la taille d’image est définie sur 16:9 Auto. Vous pouvez déterminer la taille d’image souhaitée sur 4:3 WSS (Wide Screen Service) ou sur la taille d’origine. Chaque pays européen impose une taille d’image différente. Français◀ ▶ ● Réglage écran PC pour les téléviseurs LED de la série 4 de 19 pouces et de la série 5 de 22 pouces N Disponible uniquement en mode PC. Régl. Base / Regl. Préc: élimine ou réduit les parasites visuels. élimine ou réduit les parasites visuels. Si vous ne pouvez pas éliminer ces parasites au moyen d’un réglage précis uniquement, réglez la fréquence (Régl. Base) au mieux, puis effectuez de nouveau un réglage précis. Une fois les parasites réduits, effectuez un nouveau réglage de l’image pour l’aligner au centre de l’écran. Position: permet de régler la position de l'écran du PC si elle ne convient pas à l'écran du téléviseur. Appuyez sur le bouton ▲ ou ▼ pour régler la position verticale. Appuyez sur le bouton ◄ ou ► pour régler la position horizontale. Réinitialiser Image: rétablit les paramètres d’image par défaut. Français◀ ▶ ■ Réglage Automatiquet pour les téléviseurs LED de la série 4 de 19 pouces et de la série 5 de 22 pouces O MENUm → Image → Réglage Automatique → ENTERE Cette option permet de régler les positions/valeurs de fréquence et d’affiner automatiquement les paramètres. N Disponible uniquement en mode PC. N on disponible en cas de connexion à l’aide d’un câble HDMI/DVI. Utilisation de votre téléviseur comme écran d’ordinateur (PC) Configuration de votre logiciel PC (instructions basées sur le système d'exploitation Windows) En fonction de la version de Windows et de la carte graphique utilisées, les écrans affichés sur votre PC peuvent être différents. Cependant, les mêmes informations de configuration de base seront généralement appliquées. Dans le cas contraire, contactez le fabricant de votre ordinateur ou votre revendeur Samsung. Français◀ ▶ Pour régler la résolution de l'écran, cliquez sur "Panneau de configuration" dans le menu "Démarrer" de Windows, puis définissez la résolution d'écran souhaitée dans "Affichage". N REMARQUE ● Réglage correct de la taille (résolution d'écran) - [Optimale: 1366 X 768 pixels] pour les téléviseurs LED de la série 4 - [Optimale: 1920 X 1080 pixels] pour les téléviseurs LED de la série 5 ● S'il existe une option de fréquence verticale dans les paramètres d'affichage, la valeur correcte est "60" ou "60 Hz". Français◀ ▶ ❑ Modification des options d’image ■ Paramètres avancés O MENUm → Image → Paramètres avancés → ENTERE (Disponible en mode Standard / Cinéma) Vous pouvez régler les paramètres avancés de votre écran, notamment la couleur et le contraste. N Lors de la connexion à un ordinateur, vous pouvez uniquement apporter des modifications aux options Gamma et Balance blancs. pour les téléviseurs LED de la série 4 de 19 pouces et de la série 5 de 22 pouces Français◀ ▶ ● Contraste Dyn. (Arrêt / Bas / Moyen / Elevé): permet de régler le contraste de l’écran. ● Nuance de noir (Arrêt / Sombre / Plus sombre / Le plus sombre): sélectionnez le niveau de noir afin de régler la profondeur d’écran. ● Carnation: permet de régler la couleur de carnation. Paramètres avancés Contraste Dyn. Moyen Nuance de noir Arrêt Carnation 0 RVB uniquement Arrêt Espace de couleur Natif Balance blancs Gamma 0 ● RVB uniquement (Arrêt / Rouge / Vert / Bleu): affiche les couleurs Rouge, Vert et Bleu afin de permettre un réglage précis de la teinte et de la saturation. ● Espace de couleur (Auto. / Natif): permet de régler la gamme des couleurs disponibles pour créer l'image. Français◀ ▶ ● Balance blancs: permet de régler la température des couleurs afin d’obtenir une image plus naturelle. Aj. Rouge / Aj. Vert / Aj. Bleu: permet de régler la profondeur de chaque couleur (rouge, vert, bleu). Régl. Rouge / Régl. vert / Régl. bleu: permet de régler la profondeur de chaque couleur (rouge, vert, bleu). Réinit.: rétablit les paramètres par défaut de l’option Balance blancs. ● Gamma: permet de régler l’intensité des couleurs primaires. ● Lumin./Mouvement (Arrêt / Marche): permet de réduire la consommation d'énergie en contrôlant la luminosité par rapport au mouvement. N Cette fonction n'est pas prise en charge en mode 3D. pour les téléviseurs plasma de la série 490 N Disponible uniquement en mode Standard. N Lors du changement d'un paramètre pour l'option Rétroéclairage pour les téléviseurs LED, LCD /Lum. Cellules pour les téléviseurs plasma , Luminosité ou Contraste, l'option Lumin./Mouvement sera définie sur Arrêt. Français◀ ▶ ■ Options d'image O MENUm → Image → Options d'image → ENTERE N Si vous connectez un PC, vous ne pouvez modifier que Nuance Coul.. ● Nuance Coul. (Froide / Standard / Chaude 1 / Chaude 2) N Les options Chaude 1 ou Chaude 2 sont désactivées lorsque le mode d’image est Dynamique. N Les paramètres peuvent être réglés et mémorisés pour chaque dispositif externe connecté à une entrée du téléviseur. Français◀ ▶ ● Filtre Bruit num. (Arrêt / Bas / Moyen / Elevé / Auto. / Visualisation auto): Si le signal de radiodiffusion reçu par votre téléviseur est faible, vous pouvez activer la fonction Filtre Bruit num. pour faciliter la réduction d'imagesfantômes ou statiques qui peuvent apparaître à l'écran. N Lorsque le signal est faible, sélectionnez une autre option jusqu'à obtention de la meilleure image possible. Visualisation auto: Lors du changement des chaînes analogiques, il affiche l'intensité du signal. N Disponible uniquement pour les chaînes analogiques. N Une pression sur le bouton INFO affiche la barre de puissance du signal. N Lorsque la barre est verte, vous recevez le meilleur signal possible. Français◀ ▶ ● Filtre Bruit MPEG (Arrêt / Bas / Moyen / Elevé / Auto.): réduit le bruit MPEG afin d’offrir une meilleure qualité d’image. ● Niv. noir HDMI (Bas / Normal): permet de choisir le niveau de noir pour régler la profondeur de l’écran. N Disponible uniquement en mode HDMI (signaux RVB). ● Mode Film (Arrêt / Auto.1 / Auto.2): règle le téléviseur de sorte qu’il détecte et traite automatiquement les signaux de cinéma en provenance de toutes les sources et adapte l’image afin d’obtenir une qualité optimale. N Disponible en modes TV, AV, COMPOSANT (480i / 1080i) et HDMI (1080i). Le modèle LCD 420 ne prend pas en charge le mode AV, Composant N Si l’image à l’écran ne semble pas naturelle, définissez sa configuration sur Arrêt / Auto.1 / Auto.2 dans Mode Film. ● Motion Plus LED (Arrêt / Activé) pour les téléviseurs de la série LED 5 : supprime les traînées des scènes rapides avec beaucoup de mouvements, ce qui rend l’image plus claire. N Il est désactivé lorsque le mode d’image est défini sur Naturel. Français◀ ▶ ■ Réinit. param. img (Oui / Non) O MENUm → Image → Réinit. param. img → ENTERE Rétablit les paramètres par défaut du mode d’image actuel. Français◀ ▶ ❑ Changement du mode Son prédéfini ■ O Mode MENU Son m t→ Son → Mode Son → ENTERE ● Standard: sélectionne le mode son normal. ● Musique: accentue la musique par rapport aux voix. ● Cinéma: offre le meilleur son pour les films. ● Voix claire: accentue les voix par rapport aux autres sons. ● Amplifier: augmente l’intensité du son aigu pour garantir une meilleure écoute aux personnes malentendantes. N Si l’option Sélection Haut-parleur est définie sur Haut-parleur ext, Mode Son est désactivé. pour les téléviseurs LED et plasma Français◀ ▶ ❑ Réglage des paramètres sonores ■ Effet sonore (mode de son standard uniquement) O MENUm → Son → Effet sonore → ENTERE Utilisez les touches fléchées vers le haut et le bas pour sélectionner une option, puis appuyez sur le bouton ENTERE. ● (mode de son standard uniquement) SRS TruSurround HD (Arrêt / Marche)t Cette fonction garantit un son surround virtuel 5.1 canaux par le biais de deux haut-parleurs grâce à la technologie HRTF (Head Related Transfer Function - Fonction de transfert asservie aux mouvements de la tête). Français◀ ▶ ● SRS TruDialog (Arrêt / Marche) (mode de son standard uniquement) Cette fonction permet d’accentuer l’intensité d’une voix par rapport au fond musical ou aux effets sonores, de manière à rendre les dialogues plus clairs lorsque vous regardez une émission. ● Egaliseur Utilisez l’égaliseur pour personnaliser les paramètres de son de chaque hautparleur. Balance: règle la balance entre les haut-parleurs droit et gauche. 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Réglage de la bande passante): règle le niveau des fréquences de bande passante spécifiques. Réinit.: rétablit les paramètres par défaut de l’égaliseur. N Si l’option Sélection Haut-parleur est définie sur Haut-parleur ext, Effet sonore est désactivé. pour les téléviseurs LED et plasma Français◀ ▶ ■ Options diffusion du son O MENUm → Son → Options diffusion du son → ENTERE ● (chaînes numériques uniquement) Langue audiot Permet de modifier la valeur par défaut des langues audio. N La langue disponible peut varier en fonction de l’émission. ● Format Audio (chaînes numériques uniquement) Lorsque le son est émis à la fois par le haut-parleur principal et le récepteur audio, un effet d’écho peut se produire en raison de la différence de vitesse de décodage entre le hautparleur principal et le récepteur audio. Dans ce cas, utilisez la fonction Haut-parleur TV. N L’option Format Audio peut varier en fonction de l’émission. Le son Dolby Digital 5.1 est disponible uniquement en cas de connexion d’un haut parleur externe au moyen d’un câble optique. Le modèle LCD 420 n'est pas pris en charge Français◀ ▶ ● Description audio (non disponible dans toutes les régions) (chaînes numériques uniquement) Cette fonction traite le flux audio relatif à la description audio (AD) lorsqu’il est envoyé avec le son principal par le radiodiffuseur. Description audio (Arrêt / Marche): active ou désactive la fonction de description audio. Volume: permet de régler le volume de description audio. Français◀ ▶ ■ Paramètres supplém. O MENUm → Son → Paramètres supplém. → ENTERE ● Niveau Audio DTV (MPEG / HE-AAC) (chaînes numériques uniquement): cette fonction vous permet de réduire la disparité d’un signal vocal (à savoir l’un des signaux reçus lors d’une émission de télévision numérique) sur le niveau souhaité. N En fonction du type de signal de radiodiffusion, les options MPEG / HEAAC peuvent être réglées sur une valeur comprise entre -10 dB et 0 dB. N Pour augmenter ou diminuer le volume, réglez ces valeurs entre 0 et -10, respectivement. Français◀ ▶ ● Sortie SPDIF pour les téléviseurs LED et plasma : le format SPDIF (Sony Philips Digital InterFace) est utilisé pour fournir du son numérique, en réduisant les interférences vers les haut-parleurs et divers dispositifs numériques, tels qu’un lecteur DVD. Format Audio: vous pouvez sélectionner le format de sortie audio numérique (SPDIF). Le format SPDIF disponible peut varier en fonction de la source d'entrée. N La connexion de haut-parleurs 5.1 canaux dans un environnement Dolby Digital vous permet d’optimiser votre environnement sonore 3D interactif. Retard Audio: cette option permet de corriger le décalage audio/vidéo lorsque vous regardez la télévision ou une vidéo et diffusez la sortie audio numérique sur un dispositif externe tel qu’un récepteur AV (0ms ~ 250ms). Français◀ ▶ ● Comp Dolby Digital (Line / RF): cette fonction réduit la disparité entre un signal Dolby Digital et un signal vocal (à savoir, Audio MPEG, HE-AAC, Son ATV). N Sélectionnez Line pour obtenir un son dynamique et RF pour réduire la différence entre les sons forts et faibles pendant la nuit. Line: permet de définir le niveau de sortie des signaux supérieurs ou inférieurs à -31 dB (référence) sur -20 dB ou -31 dB. RF: permet de définir le niveau de sortie des signaux supérieurs ou inférieurs à -20 dB (référence) sur -10 dB ou -20 dB. Français◀ ▶ ■ Paramètres haut-parleur O MENUm → Son → Paramètres haut-parleur → ENTERE ● Sélection Haut-parleur (Haut-parleur ext / Haut-parleur TV) pour les téléviseurs LED et plasma Un effet d’écho peut se produire en raison de la différence de vitesse de décodageentre le haut-parleur principal et le récepteur audio. Dans ce cas, réglez le téléviseur sur Haut-parleur ext. N Lorsque l'option Sélection Haut-parleur est définie sur Haut-parleur ext, les boutons de volume et MUTE ne sont pas opérationnels et les paramètres sonores sont limités. N Lorsque l'option Sélection Haut-parleur est définie sur Haut-parleur ext. ● Haut-parleur TV: Arrêt, Haut-parleur ext: Marche N Lorsque l'option Sélection Haut-parleur est définie sur Haut-parleur TV. ● Haut-parleur TV: Marche, Haut-parleur ext: Marche N En l’absence de signal vidéo, les deux haut-parleurs sont coupés. Français◀ ▶ ● Volume auto (Arrêt / Normal / Nuit) Pour équilibrer le niveau de volume sur chaque canal, définissez cette option sur Normal. Nuit: ce mode garantit un environnement sonore de meilleure qualité que le mode Normal, avec une absence pratiquement totale de parasites. Il s’avère particulièrement utile pendant la nuit. N Pour contrôler le niveau de volume sur le périphérique source connecté au téléviseur, définissez l’option Volume auto sur Arrêt sur le téléviseur. Sinon, il se peut que les réglages du volume du périphérique source ne soient pas appliqués. Français◀ ▶ ■ Réinit. son (Oui / Non) O MENUm → Son → Réinit. son → ENTERE Rétablit les paramètres sonores par défaut définis en usine. Français◀ ▶ ❑ Sélection Lorsque vous définissez cette option sur du mode SontDual I-II, le mode son actuel est affiché à l’écran. Type d'audio Dual I-II Par défaut Stéréo A2 Mono Mono Changement automatique Stéréo Stéréo ↔ Mono Dual Dual I ↔ Dual II Dual I NICAM Stéréo Mono Mono Changement automatique Stéréo Mono ↔ Stéréo Dual Mono → Dual I  Dual II❑❑ Dual I N Si le signal stéréo est faible et qu’une commutation automatique se produit, passez en Mono. N Cette fonction n’est activée qu’avec un signal sonore stéréo. N Accessible uniquement lorsque la Source est définie sur TV. Français◀ ▶ Fonctions de préférence ❑ Connexion au réseau pour les téléviseurs LED de la série 5 de 32 pouces et supérieure, et les téléviseurs plasma série 490 N Dans le cas des téléviseurs LED, la fonction réseau n'est pas prise en charge dans tous les pays. ■ Connexion réseau câblée Vous pouvez connecter votre téléviseur au réseau local avec un câble de trois manières différentes : Français◀ ▶ ● En connectant le port LAN situé à l'arrière du téléviseur à un modem externe à l'aide d'un câble LAN. Reportez-vous au schéma ci-dessous. * Susceptible de varier en fonction du modèle. Connecteur Modem mural Modem externe (ADSL / VDSL / TV par câble) Panneau arrière du téléviseur Câble Modem Câble LAN Français◀ ▶ ● En connectant le port LAN situé à l'arrière du téléviseur à un routeur IP connecté, à son tour, à un modem externe. Pour cela, utilisez le câble LAN. Reportez-vous au schéma ci-dessous. * Susceptible de varier en fonction du modèle. Connecteur Modem mural Modem externe (ADSL / VDSL / TV par câble) Routeur IP (avec serveur DHCP) Panneau arrière du téléviseur Câble Modem Câble LAN Câble LAN Français◀ ▶ ● En fonction de la configuration de votre réseau, il se peut que vous puissiez connecter directement le port LAN situé à l'arrière du téléviseur à une prise réseau murale à l'aide d'un câble LAN. Reportez-vous au schéma ci-dessous. Notez que la prise murale est reliée à un modem ou un routeur installé quelque part chez vous. * Susceptible de varier en fonction du Port LAN mural modèle. Panneau arrière du téléviseur Câble LAN ● Si votre réseau requiert une adresse IP dynamique, vous devez utiliser un routeur ou un modem ADSL prenant en charge le protocole DHCP (Dynamic Host Configuration Protocol). Français◀ ▶ Les modems de ce type fournissent automatiquement l'adresse IP, le masque de sous-réseau, la passerelle et les valeurs DNS dont votre téléviseur a besoin pour accéder à Internet. Aucune saisie manuelle n'est donc requise. La plupart des réseaux domestiques utilisent une adresse IP dynamique. Certains réseaux nécessitent une adresse IP statique. Si tel est votre cas, vous devez saisir manuellement l'adresse IP, le masque de sous-réseau, la passerelle et les valeurs DNS dans l'écran de configuration câblée de votre téléviseur lors de la configuration de la connexion réseau. Pour obtenir l'adresse IP, le masque de sous-réseau, la passerelle et les valeurs DNS, contactez votre fournisseur d'accès Internet. Si vous possédez un ordinateur Windows, vous pouvez également obtenir ces valeurs par le biais de ce dernier. N Si votre réseau nécessite une adresse IP statique, vous pouvez utiliser un modem ADSL prenant en charge le protocole DHCP. Les modems ADSL prenant en charge le protocole vous permettent également d'utiliser des adresses IP statiques. N Elle n'est pas prise en charge lorsque la vitesse du réseau est égale ou inférieure à 10 Mbit/s. Français◀ ▶ ■ Connexion réseau sans fil Pour établir une connexion sans fil entre le téléviseur et le réseau, vous avez besoin d'un routeur ou d'un modem sans fil et d'un adaptateur LAN sans fil Samsung (WIS12ABGNX,WIS09ABGNX), que vous connectez au port USB situé sur le panneau latéral ou arrière du téléviseur. Reportez-vous à l'illustration cidessous. Câble LAN Routeur IP sans fil (routeur sans fil avec serveur DHCP) Adaptateur sans fil SamsungAdaptateur LAN Panneau latéral du téléviseur Port LAN mural Français◀ ▶ L’adaptateur LAN sans fil de Samsung est vendu séparément, et est disponible auprès de certains revendeurs et sur les sites de commerce électronique. Cet adaptateur prend en charge les protocoles de communication IEEE 802.11a/b/ g et n. Samsung vous conseille d'utiliser le protocole IEEE 802.11n. Si vous lisez une vidéo sur une connexion réseau, des saccades risquent d’apparaître. N REMARQUE ● Vous devez employer l'adaptateur LAN sans fil Samsung (WIS12ABGNX, WIS09ABGNX) pour utiliser un réseau sans fil. ● L’adaptateur LAN sans fil Samsung et le câble d’extension USB sont vendus séparément, et sont disponibles auprès de certains revendeurs et sur les sites de commerce électronique. Français◀ ▶ ● Pour utiliser un réseau sans fil, vous devez connecter le téléviseur à un routeur IP sans fil (un routeur ou un modem). Si ce routeur prend en charge le protocole DHCP, le téléviseur peut utiliser DHCP ou une adresse IP statique pour se connecter au réseau sans fil. ● Sélectionnez un canal inutilisé pour le routeur IP sans fil. Si le canal affecté au routeur IP sans fil est actuellement utilisé par un autre périphérique dans le voisinage, il y aura des interférences et la communication peut échouer ● Si vous utilisez des paramètres de sécurité différents de ceux indiqués cidessous, le routeur ne fonctionnera pas avec le téléviseur. Français◀ ▶ ● Si le mode HIGH PURE THROUGHPUT (Greenfield) 802.11N est sélectionné et que le type de cryptage est défini sur WEP ou TKIP pour votre routeur sans fil, les téléviseurs Samsung ne prendront pas en charge la connexion, conformément aux nouvelles spécifications de certification Wi-Fi. ● Si votre routeur sans fil prend en charge le WPS (Wi-Fi Protected Setup), vous pouvez vous connecter au réseau via PBC (Push Button Configuration) ou à l'aide d'un code PIN (Personal Indentification Number). La fonction WPS configurera automatiquement le SSID et la clé WPA dans ces deux modes. ● Si votre routeur, modem ou appareil n'est pas certifié, il risque de ne pas pouvoir se connecter au téléviseur via l'adaptateur LAN sans fil Samsung. ● Veillez à ce que le téléviseur soit éteint avant de connecter l’adaptateur LAN sans fil Samsung. Français◀ ▶ ● Méthodes de connexion: Vous pouvez configurer la connexion réseau sans fil de la manière indiquée ci-dessous. – Auto. (Utilisation de la fonction Auto Network Search) – Manuel – WPS(PBC) – Wi-Fi Direct ● L'adaptateur LAN sans fil Samsung peut ne pas être reconnu si vous utilisez une connexion par hub USB ou par câble d'extension USB autre que le câble fourni. Français◀ ▶ Avis L'image peut apparaître altérée ou statique pour certaines chaînes lorsque le téléviseur est connecté à l'adaptateur LAN sans fil Samsung. Le cas échéant, établissez une connexion à l'aide de l'une des méthodes suivantes ou branchez l'adaptateur LAN sans fil Samsung avec un câble USB à un emplacement préservé de toute interférence radio. Méthode 1 Connexion à l'aide de l'adaptateur USB à angle droit. Pour brancher l'adaptateur LAN sans fil Samsung avec l'adaptateur USB à angle droit, procédez comme suit : 1. Connectez l'adaptateur USB à angle droit à l'adaptateur LAN sans fil Samsung. 2. Connectez l'autre partie de l'adaptateur USB à angle droit au port USB. * L'emplacement du port peut varier en fonction du modèle. Français◀ ▶ Méthode 2 Connexion via un câble d'extension Pour rebrancher l'adaptateur LAN sans fil Samsung avec le câble d'extension, procédez comme suit : 1. Connectez le câble d'extension au port USB. 2. Connectez le câble d'extension à l'adaptateur LAN sans fil Samsung. 3. Attachez l'adaptateur LAN sans fil Samsung à l'arrière du téléviseur vers le haut avec du ruban adhésif double face. N L’adaptateur LAN sans fil Samsung doit être installé dans une zone préservée de toute interférence afin d’éviter toute interférence entre l’adaptateur et le syntoniseur. ou * L'emplacement du port peut varier en fonction du modèle. Français◀ ▶ ■ Paramètres réseau O MENUm → Réseau → Paramètres réseau → ENTERE Vous pouvez configurer la connexion réseau sans fil ou câblée. N Pour consulter des paramètres détaillés sur le réseau câblé ou sans fil, consultez, respectivement, la section "Configuration du réseau câblé" ou "Configuration du réseau sans fil" de ce manuel. Français◀ ▶ ■ État du réseau O MENUm → Réseau → État du réseau → ENTERE Vérifiez l'état Internet et du réseau. Français◀ ▶ ❑ Configuration du réseau câblé pour les téléviseurs LED de la série 5 de 32 pouces et supérieure, et les téléviseurs plasma série 490 N Dans le cas des téléviseurs LED, la fonction réseau n'est pas prise en charge dans tous les pays. ■ Configuration du réseau câblé (Auto) N Lors de la connexion du câble réseau (LAN), la fenêtre contextuelle s'affiche automatiquement pour vous permettre de définir le réseau câblé. Utilisez l'option de configuration automatique du réseau lors de la connexion du téléviseur à un réseau prenant en charge le protocole DHCP. Pour configurer automatiquement la connexion réseau par câble de votre téléviseur, procédez comme suit : Français◀ ▶ Procédure de configuration automatique 1. Accédez à l'écran Paramètres réseau. 2. Sélectionnez Démarrer. 3. L'écran de connexion réseau s'affiche et la configuration du réseau est effectuée. Paramètres réseau Câble réseau connecté. Appuyez sur Démarrer pour configurer vos paramètres de réseau câblé. Pour vous connecter à votre réseau sans fil, branchez un Samsung Wireless LAN Adapter. Démarrer Annuler N Si la configuration automatique échoue, vérifiez la connexion du port LAN. N Si les valeurs de connexion réseau sont introuvables ou si vous souhaitez définir la connexion manuellement, définissez cette option sur Manuel. Reportez-vous à la section "Procédure de configuration manuelle" ci-après. Français◀ ▶ ■ Configuration du réseau câblé (Manuel) Utilisez l'option de configuration manuelle du réseau lors de la connexion du téléviseur à un réseau qui nécessite une adresse IP statique. Obtention des valeurs de connexion au réseau Pour obtenir les valeurs de connexion au réseau sur la plupart des ordinateurs Windows, procédez comme suit : 1. Cliquez avec le bouton droit de la souris sur l'icône Réseau située dans le coin inférieur droit de l'écran. 2. Cliquez sur Etat dans le menu contextuel. 3. Cliquez sur l'onglet Assistance dans la boîte de dialogue affichée. 4. Cliquez sur le bouton Détails de l'onglet Assistance. Les valeurs de connexion au réseau sont affichées. Français◀ ▶ Procédure de configuration manuelle Pour configurer automatiquement la connexion réseau par câble de votre téléviseur, procédez comme suit : 1. Suivez les étapes 1 et 2 de la "Procédure de configuration automatique". 2. Sélectionnez Param. IP dans l'écran de test du réseau. 3. Définissez l'option Mode IP sur Manuel. 4. Appuyez sur le bouton ▼ pour accéder au premier champ de saisie. Param. IP R Retour OK Mode IP Manuel Adresse IP 0 . 0 . 0 . 0 Masque ss-réseau 0 . 0 . 0 . 0 Passerelle 0 . 0 . 0 . 0 Mode DNS Manuel Serveur DNS 0 . 0 . 0 . 0 5. Entrez les valeurs Adresse IP, Masque ss-réseau, Passerelle, et Serveur DNS. Utilisez les touches numériques pour saisir des chiffres et les touches fléchées pour passer d'un champ de saisie à un autre. 6. Lorsque vous avez terminé, sélectionnez OK. 7. L'écran de connexion réseau s'affiche et la configuration du réseau est effectuée. Français◀ ▶ Liste de contrôle relative à l'échec de la connexion réseau câblée Lorsque la connexion réseau câblée échoue, essayez d'appliquer les informations suivantes à chaque problème. Problèmes Solutions et explications Aucun câble détecté. • Vérifiez que votre câble réseau est branché. • Si tel est le cas, assurez-vous que le routeur est sous tension ; le cas échéant, essayez de l'éteindre, puis de le rallumer. Echec de la définition automatique de l'adresse IP. Tentez l'opération suivante pour définir automatiquement votre adresse IP ou définissez-la manuellement en sélectionnant Param. IP. • Assurez-vous que le serveur DHCP est activé sur le routeur, puis débranchez et rebranchez le routeur. • Contactez votre fournisseur d'accès Internet pour plus d'informations. Français◀ ▶ Problèmes Solutions et explications Connexion au réseau impossible. • Vérifiez si votre adresse IP est définie correctement dans Param. IP. • Contactez votre fournisseur d'accès Internet pour plus d'informations. Connexion à votre réseau local établie, mais connexion à Internet impossible. • Vérifiez que votre câble LAN est connecté correctement au port LAN du routeur. • Vérifiez les paramètres DNS dans Param. IP. • Si le problème persiste, contactez votre fournisseur d'accès Internet pour pouvoir accéder à Internet. Configuration du réseau terminée, mais connexion à Internet impossible. • Vérifiez que votre routeur est connecté à Internet. • Si le problème persiste, contactez votre fournisseur d'accès Internet pour pouvoir accéder à Internet. Français◀ ▶ ❑ Configuration du réseau sans fil pour les téléviseurs LED de la série 5 de 32 pouces et supérieure, et les téléviseurs plasma série 490 N Dans le cas des téléviseurs LED, la fonction réseau n'est pas prise en charge dans tous les pays. ■ Configuration du réseau sans fil (Auto) La plupart des réseaux sans fil disposent d'un système de sécurité en option nécessitant l'accès de périphériques au réseau pour transmettre un code de sécurité crypté appelé clé d'accès ou de sécurité. Le code de sécurité repose sur une phrase secrète, qui correspond généralement à un mot ou une série de lettres et de chiffres d'une longueur définie, que vous devez saisir lors de la configuration de la sécurité sans fil au niveau de votre réseau sans fil. Si vous optez pour cette méthode de configuration pour la connexion réseau et que vous disposez d'un code de sécurité pour votre réseau sans fil, vous devrez entrer la phrase secrète lors de la procédure de configuration. N Lors de la connexion d'un adaptateur LAN sans fil Samsung, la fenêtre contextuelle s'affiche automatiquement pour vous permettre de configurer le réseau sans fil. Français◀ ▶ Procédure de configuration automatique 1. Accédez à l'écran Paramètres réseau. 2. Sélectionnez Démarrer. 3. La fonction Réseau recherche les réseaux sans fil disponibles. Lorsque vous avez terminé, la liste des réseaux disponibles s'affiche. Paramètres réseau Samsung Wireless LAN Adapter connecté. Appuyez sur Démarrer pour configurer vos paramètres de réseau sans fil. Pour vous connecter à votre réseau câblé, branchez un câble réseau. Démarrer Annuler 4. Dans la liste des réseaux, appuyez sur le bouton ▲ ou ▼ pour sélectionner un réseau, puis sur le bouton ENTERE. N Si le routeur sans fil est caché (Invisible), vous devez sélectionner l'option Ajouter réseau, et entrer le nom de réseau et le code de sécurité corrects pour établir la connexion. Français◀ ▶ 5. Si la fenêtre contextuelle Sécurité s'affiche, passez à l'étape 6. Si vous sélectionnez le routeur sans fil non sécurisé, passez à l'étape 7. 6. Si le routeur sans fil est sécurisé, entrez le code de sécurité (Sécurité ou code PIN). N Lors de la saisie du code de sécurité (Sécurité ou PIN), utilisez les boutons ▲/▼/◄ /► pour sélectionner des chiffres/caractères. Appuyez sur ENTERE pour saisir les caractères. N Vous devriez retrouver la phrase secrète dans l'un des écrans de configuration utilisés pour la configuration de votre routeur ou modem. 7. L'écran de connexion réseau s'affiche et la configuration du réseau est effectuée. N Si la définition du code de sécurité (Sécurité ou PIN) échoue, sélectionnez Réessayer ou Param. IP. N Si vous souhaitez définir manuellement la connexion, sélectionnez l'option Param. IP. Reportez-vous à la section "Procédure de configuration manuelle" ci-après. Français◀ ▶ ■ Configuration du réseau sans fil (Manuel) Utilisez l'option de configuration manuelle du réseau lors de la connexion du téléviseur à un réseau qui nécessite une adresse IP statique. Obtention des valeurs de connexion au réseau Pour obtenir les valeurs de connexion au réseau sur la plupart des ordinateurs Windows, procédez comme suit : 1. Cliquez avec le bouton droit de la souris sur l'icône Réseau située dans le coin inférieur droit de l'écran. 2. Cliquez sur Etat dans le menu contextuel. 3. Cliquez sur l'onglet Assistance dans la boîte de dialogue affichée. 4. Cliquez sur le bouton Détails de l'onglet Assistance. Les valeurs de connexion au réseau sont affichées. Français◀ ▶ Procédure de configuration manuelle Pour configurer automatiquement la connexion réseau par câble de votre téléviseur, procédez comme suit : 1. Suivez les étapes 1 et 7 de la "Procédure de configuration automatique". 2. Sélectionnez Param. IP dans l'écran de test du réseau. 3. Définissez l'option Mode IP sur Manuel. 4. Appuyez sur le bouton ▼ pour accéder au premier champ de saisie. 5. Entrez les valeurs Adresse IP, Masque ss-réseau, Passerelle, et Serveur DNS. Utilisez les touches numériques pour saisir des chiffres et les touches fléchées pour passer d'un champ de saisie à un autre. 6. Lorsque vous avez terminé, sélectionnez OK. 7. L'écran de connexion réseau s'affiche et la configuration du réseau est effectuée. Français◀ ▶ ■ Configuration du réseau sans fil (WPS(PBC)) Si votre routeur est pourvu d'un bouton PBC(WPS), procédez comme suit : 1. Accédez à l'écran Paramètres réseau. 2. Sélectionnez Démarrer. 3. La fonction Réseau recherche les réseaux sans fil disponibles. Lorsque vous avez terminé, la liste des réseaux disponibles s'affiche. 4. Sélectionnez l'option WPS(PBC). 5. Appuyez sur le bouton WPS(PBC) de votre routeur dans les deux minutes. Votre téléviseur récupère automatiquement tous les paramètres réseau dont il a besoin et se connecte à votre réseau. 6. L'écran de connexion réseau s'affiche et la configuration du réseau est effectuée. Français◀ ▶ Echec au niveau de la liste de contrôle pour la connexion réseau sans fil Lorsque la connexion réseau sans fil échoue, essayez d'appliquer les informations suivantes à chaque problème. Problèmes Solutions et explications La connexion au réseau sans fil a échoué. • Aucun routeur sans fil sélectionné. Allez dans Paramètres réseau pour sélectionner votre routeur. • L'adaptateur LAN sans fil Samsung est nécessaire pour utiliser un réseau sans fil. • Assurez-vous que le téléviseur est connecté à un routeur IP sans fil. Echec de la définition automatique de l'adresse IP. • Tentez l'opération suivante pour définir automatiquement votre adresse IP ou définissez-la manuellement en sélectionnant Param. IP. • Assurez-vous que le serveur DHCP est activé sur le routeur, puis débranchez et rebranchez le routeur. • Vérifiez si vous devez entrer un code de sécurité pour utiliser le routeur. • Contactez votre fournisseur d'accès Internet pour plus d'informations. Français◀ ▶ Problèmes Solutions et explications Connexion au routeur sans fil impossible. • Vérifiez que le routeur est sous tension ; le cas échéant, essayez de l'éteindre, puis de le rallumer. • Vérifiez si vous devez entrer un code de sécurité pour utiliser le routeur. Connexion au réseau impossible. • Vérifiez si votre adresse IP est définie correctement dans Param. IP. • Vérifiez si vous devez entrer un code de sécurité pour utiliser le routeur. • Contactez votre fournisseur d'accès Internet pour plus d'informations. Connexion à votre réseau local établie, mais connexion à Internet impossible. • Vérifiez que votre câble LAN est connecté correctement au port LAN du routeur. • Vérifiez les paramètres DNS dans Param. IP. • Si le problème persiste, contactez votre fournisseur d'accès Internet pour pouvoir accéder à Internet. Configuration du réseau terminée, mais connexion à Internet impossible. • Vérifiez que votre routeur est connecté à Internet. • Si le problème persiste, contactez votre fournisseur d'accès Internet pour pouvoir accéder à Internet. Français◀ ▶ Si le téléviseur ne parvient pas à se connecter à Internet Il se peut que votre téléviseur ne parvienne pas à se connecter à Internet du fait que votre fournisseur d'accès a enregistré de manière permanente l'adresse MAC (numéro d'identification unique) de votre PC ou modem, qui est authentifiée à chaque connexion à Internet afin d'éviter tout accès non autorisé. Dans la mesure où votre téléviseur possède une adresse MAC différente, votre fournisseur d'accès Internet ne peut pas l'authentifier, ce qui rend impossible toute connexion. Pour remédier à ce problème, demandez à votre fournisseur d’accès la procédure à suivre pour connecter des appareils autres que votre PC (votre téléviseur, par exemple) à Internet. Si votre fournisseur d'accès exige un identifiant (ID) ou un mot de passe pour la connexion à Internet, votre téléviseur ne pourra peut-être pas se connecter à Internet. Si tel est le cas, vous devez entrer l'identifiant ou le mot de passe lors de la connexion à Internet. La connexion à Internet peut échouer à cause d’un problème de pare-feu. Dans ce cas, contactez votre fournisseur d'accès Internet. Si vous ne parvenez toujours pas à vous connecter à Internet après avoir suivi les procédures indiquées par votre fournisseur d'accès, contactez Samsung Electronics. Français◀ ▶ ❑ Gestion des périphériques connectés au réseau pour les téléviseurs plasma série 490 ■ Wi-Fi Direct O MENUm → Réseau → Wi-Fi Direct → ENTERE Utilisez cette option pour connecter le téléviseur à des périphériques mobiles sans fil. A l'aide de cette fonction, vous pouvez connecter directement des périphériques mobiles sans fil à votre téléviseur sans passer par un routeur san fil. N Vous pouvez utiliser cette fonction lors de la connexion de l'adaptateur LAN sans fil Samsung. N Ne prend en charge que la fonction AllShare Play. N Cette fonction peut ne pas être prise en charge, en fonction du périphérique mobile. Français◀ ▶ Comment connecter votre périphérique à votre téléviseur à l'aide de la fonction Wi-Fi Direct 1. Accédez à l'écran Wi-Fi Direct. Le téléviseur lance une recherche de périphériques. 2. Activez la fonction Wi-Fi Direct sur votre périphérique. Sélectionnez le périphérique souhaité, puis appuyez sur le bouton ENTERE. ● PBC : appuyez sur le bouton WPS (PBC) de votre périphérique dans les deux minutes. Votre téléviseur récupère automatiquement tous les paramètres réseau dont il a besoin et se connecte à votre réseau. ● PIN : entrez le code PIN affiché sur votre périphérique. N Pour déconnecter le périphérique, sélectionnez-le, puis appuyez sur le bouton ENTERE afin de sélectionner Déconnexion. Français◀ ▶ ■ Paramètres AllShare O MENUm → Réseau → Paramètres AllShare → ENTERE Indique si un périphérique connecté au réseau, tel qu'un smartphone ou une tablette, doit être autorisé ou non à partager du contenu ou à commander le téléviseur à l'aide d'une application téléchargée. Pour plus d'informations sur les options de configuration, reportez-vous à la section "Utilisation des fonctions DLNA". Français◀ ▶ ■ Nom du périph. O MENUm → Réseau → Nom du périph. → ENTERE Permet de modifier manuellement le nom du téléviseur. N Un clavier s'affiche à l'écran, vous donnant ainsi la possibilité de saisir manuellement un nom à l'aide de la télécommande. Si vous définissez, par exemple, le nom sur TV Samsung, appuyez sur chaque caractère à l'aide des boutons ▲/▼/◄/►, puis sélectionnez Terminé. Français◀ ▶ ❑ Exécution de la configuration initiale ■ Configuration O MENUm → Système → Configuration → ENTERE Réglez les chaînes et l'heure si vous configurez le téléviseur pour la première fois ou après une réinitialisation. N Pour des informations détaillées à propos du menu Configuration, reportezvous à la seciton "Configuration initiale" du Manuel de l'utilisateur. Français◀ ▶ ❑ Réglage de l’heure ■ Heure O MENUm → Système → Heure → ENTERE L’heure actuelle s’affiche à chaque fois que vous appuyez sur le bouton INFO. ● Horloge: le réglage de l’heure est nécessaire pour utiliser différentes fonctions de minuterie du téléviseur. N Si vous débranchez le cordon d’alimentation, vous devez régler de nouveau l’horloge. Mode Horloge: permet de définir l'heure manuellement ou automatiquement. – Auto.: règle automatiquement l'heure en fonction des signaux diffusés par une chaîne numérique. N L’antenne doit être connectée pour permettre le réglage automatique de l’heure. Français◀ ▶ – Manuel: permet de régler l'heure manuellement. N En fonction du signal et de la station de diffusion, il se peut que la configuration automatique de l’heure soit incorrecte. Dans ce cas, réglez l’heure manuellement. Réglage Horloge: permet de régler la Date et l'Heure. N Disponible uniquement lorsque l’option Mode Horloge est définie sur Manuel. N Vous pouvez régler directement la Date et l'Heure en appuyant sur les touches numériques de la télécommande. Fuseau Horaire (en fonction du pays): sélectionnez votre fuseau horaire. N Cette fonction est uniquement disponible lorsque Mode Horloge est défini sur Auto.. N Si vous sélectionnez l’option Manuel dans Fuseau Horaire, GMT et Heure d'été sont activés. Français◀ ▶ ❑ Utilisation de la veille O MENUm → Système → Heure → Veille → ENTERE ● Veillet: éteint automatiquement le téléviseur après une période déterminée. (30, 60, 90, 120, 150 ou 180 minutes). N Pour annuler la fonction Veille, sélectionnez Arrêt. Français◀ ▶ ❑ Réglage de la minuterie de mise en marche / arrêt O MENUm → Système → Heure → Progr. activ. Progr. désact. → ENTERE ● Progr. activ. 1 / Progr. activ. 2 / Progr. activ. 3: Vous pouvez définir trois réglages de mise en marche différents. Vous devez d'abord régler l'horloge. – Configuration: Sélectionnez Une fois, Quotid., Lun~Ven, Lun~Sam, Sam~Dim ou Manuel pour définir l'option suivant vos besoins. Si vous sélectionnez Manuel, vous pouvez choisir le jour d'activation de la minuterie. N Le symbole c indique le jour sélectionné. – Heure: permet de régler les heures et les minutes. – Volume: sélectionnez le niveau de volume désiré. Français◀ ▶ – Source: sélectionnez le contenu TV ou USB à lire lors de la mise sous tension automatique du téléviseur. (L’option USB peut uniquement être sélectionnée lorsqu’un périphérique USB est connecté au téléviseur.) – Antenne (lorsque Source est réglé sur TV): sélectionnez ATV ou DTV. – Canal (lorsque Source est réglé sur TV): permet de sélectionner la chaîne souhaitée. – Musique / Photo (lorsque Source est réglé sur USB): sélectionnez un dossier de la clé USB contenant les fichiers de musique ou les photos qui doivent être lus lors de la mise sous tension automatique du téléviseur. N REMARQUE ● Si le périphérique USB ne contient aucun fichier audio ou si le dossier contenant un fichier audio n'est pas sélectionné, la fonction de veille ne fonctionne pas correctement. Français◀ ▶ ● Si le périphérique USB ne contient qu'un seul fichier photo, la fonction de diaporama ne démarre pas. ● Les dossiers dont le nom est trop long ne peuvent pas être sélectionnés. ● Chaque périphérique USB utilisé se voit attribuer son propre dossier. Si vous utilisez plusieurs périphériques USB du même type, assurez-vous que les dossiers affectés à chacun d’eux portent des noms différents. ● Il est conseillé d'utiliser une clé USB et un lecteur de cartes multiformat lors de l'utilisation de la fonction Progr. activ.. ● Il se peut que l'option Progr. activ. ne fonctionne pas avec certains périphériques USB équipés d'une batterie intégrée, ainsi que des lecteurs MP3 et lecteurs multimédias portables de certains fabricants, car leur reconnaissance prend trop de temps. Français◀ ▶ ● Progr. désact. 1 / Progr. désact. 2 / Progr. désact. 3: Vous pouvez définir trois réglages de mise à l'arrêt différents. Vous devez d'abord régler l'horloge. Configuration: Sélectionnez Une fois, Quotid., Lun~Ven, Lun~Sam, Sam~Dim ou Manuel pour définir l'option suivant vos besoins. Si vous sélectionnez Manuel, vous pouvez choisir le jour d'activation de la minuterie. N Le symbole c indique le jour sélectionné. Heure: permet de régler les heures et les minutes. Français◀ ▶ ❑ Verrouillage des programmes ■ Sécurité O MENUm → Système → Sécurité → ENTERE N L’écran de saisie du code PIN s’affiche après l’écran de configuration. N Entrez votre code PIN à quatre chiffres. Modifiez le code PIN à l’aide de l’option Modifier PIN. ● Verr. chaîne (Arrêt / Activé): vous pouvez verrouiller des chaînes dans le menu Canal afin d'empêcher certains utilisateurs, tels que des enfants, de regarder des émissions qui ne leur sont pas destinées. N Disponible uniquement lorsque la Source est définie sur TV. Français◀ ▶ ● Contrôle Parental (en fonction du pays): cette fonction permet d'empêcher certains utilisateurs, tels que des enfants, de regarder des émissions qui ne leur sont pas destinées, à l'aide d'un code PIN à 4 chiffres défini par l'utilisateur. Si la chaîne sélectionnée est verrouillée, le symbole “\” apparaît. N Les options de Contrôle Parental diffèrent selon le pays. ● Modifier PIN: Une modification de votre mot de passe est requise pour pouvoir configurer le téléviseur. Français◀ ▶ ❑ Incrustation d’image (PIP) ■ O PIP MENU tm → Système → PIP → ENTERE Permet de regarder simultanément le tuner TV et une source vidéo externe. PIP (Incrustation d’image) ne fonctionne pas dans le même mode. N REMARQUE ● Pour le son PIP, reportez-vous aux instructions de la section Sélection du son. ● Si vous éteignez le téléviseur alors que le mode PIP est activé, la fenêtre PIP disparaît lorsque vous le rallumez. ● Il est possible que l’image affichée dans la fenêtre PIP semble légèrement moins naturelle lorsque vous utilisez l’écran principal pour un jeu ou un karaoké. Français◀ ▶ ● Réglages PIP Le modèle LCD 420 ne prend pas en charge le mode AV, Composant Image principale Image secondaire Composant, HDMI TV ● PIP (Arrêt / Activé): active ou désactive la fonction PIP. ● Canal: permet de choisir la chaîne affichée dans l’écran secondaire. ● Taille (Õ / Ã): sélectionnez la taille de l’image secondaire. ● Position (à / – / — / œ): sélectionnez la position de l’imagesecondaire. ● Sélection du son (Principal / Secondaire): vous pouvez sélectionner le mode audio de votre choix (Principal / Secondaire) en mode PIP. Français◀ ▶ ❑ Solutions économiques ■ Solution Eco O MENUm → Système → Solution Eco → ENTERE ● Mode éco. (Arrêt / Bas / Moyen / Elevé / Image désactivée)t: permet de régler la luminosité du téléviseur afin de réduire la consommation d’énergie. Si vous sélectionnez Image désactivée, l’écran est éteint, mais le son reste actif. Appuyez sur n'importe quel bouton, excepté celui du volume, pour allumer l'écran. Français◀ ▶ ● Capteur Eco (Arrêt / Activé) pour les téléviseurs LED de la série 5 de 32 pouces et supérieure, et les téléviseurs plasma : cette fonction permet d’optimiser vos économies d’énergie ; les réglages de l’image s’adaptent automatiquement en fonction de la luminosité de la pièce. N Lors du réglage de la fonction Rétroéclairage pour les téléviseurs LED LCD / Lum. Cellules pour les téléviseurs plasma , le Capteur Eco passe sur Arrêt. Rétro-écl. min pour les téléviseurs LED LCD / Lum. cellules min. pour les téléviseurs plasma : lorsque Capteur Eco est défini sur Activé, la luminosité d’écran minimale peut être réglée manuellement. N Si Capteur Eco est Activé, la luminosité de l'écran peut changer (ildevient plus ou moins lumineux) en fonction de l'intensité de la lumière environnante. Français◀ ▶ ● Veille si aucun signal (Arrêt / 15 min / 30 min / 60 min): pour éviter toute consommation d'énergie inutile, définissez la durée d'activation du téléviseur lorsqu'il ne reçoit pas de signal. N Il est désactivé lorsque le PC est en mode d’économie d’énergie. ● Hors ten. auto (Arrêt / Activé): le téléviseur s'éteint automatiquement si aucune activité n'est détectée pendant 4 heures. Français◀ ▶ ❑ Autres fonctionnalités ■ Langue O MENUm → Système → Langue → ENTERE ● Langue des menus: définissez la langue des menus. ● Langue du télétexte (selon le pays): sélectionnez la langue de votre choix pour le télétexte. N L’anglais est utilisé par défaut si la langue sélectionnée n’est pas diffusée. ● Langue favorite (Audio principal / Audio secondaire / Sous-titre principal / Sous-titre secondaire / Télétexte principal / Télétexte secondaire): sélectionnez la langue qui sera utilisée par défaut lors de la sélection d'une chaîne. N Il se peut que les options Télétexte principal et Télétexte secondaire ne soient pas prises en charge dans tous les pays. Français◀ ▶ ■ Sous-titres O MENUm → Système → Sous-titres→ ENTERE Utilisez ce menu pour définir le mode Sous-titres. ● Sous-titres (Arrêt / Activé): active ou désactive les sous-titres. ● Mode sous-titre (Normal / Malentendant): configure le mode des soustitres. ● Langue des sous-titres: définit la langue des sous-titres. N Si le programme visionné ne prend pas en charge la fonction Malentendant, le mode Normal est automatiquement activé, même si le mode Malentendant est sélectionné. N L’anglais est utilisé par défaut si la langue sélectionnée n’est pas diffusée. Français◀ ▶ ■ Texte numérique (Désactiver / Activer) (Royaume-Uni uniquement) O MENUm → Système → Texte numérique → ENTERE Si le programme diffuse du texte numérique, cette fonction est activée. N MHEG (Multimedia and Hypermedia Information Coding Experts Group) Norme internationale pour les systèmes de codage des données utilisés avec le multimédia et l'hypermédia. Niveau supérieur à celui du système MPEG, qui inclut de l'hypermédia à liaison de données tel que des images fixes, le service de caractères, l'animation, les fichiers graphiques et vidéo et les données multimédia. MHEG est une technologie d'interaction de l'utilisateur en cours d'utilisation appliquée à divers domaines, dont la vidéo à la demande (VOD), la télévision interactive (ITV), le commerce électronique, la téléformation, la téléconférence, les bibliothèques numériques et les jeux en réseau. Français◀ ▶ ■ Temps protection auto pour les téléviseurs LCD et LED O MENUm → Système → Temps protection auto → ENTERE ● Temps protection auto (Arrêt / 2 heures / 4 heures / 8 heures / 10 heures): Si l’écran est inutilisé et affiche une image fixe pendant une durée définie par l’utilisateur, l’économiseur d’écran est activé de manière à prévenir la formation d’images parasites sur l’écran. Français◀ ▶ ■ Protec brûl. écran pour les téléviseurs plasma O MENUm → Système → Protec brûl. écran → ENTERE Pour réduire le risque de brûlure d’écran, cet écran est équipé d’une technologie de prévention des brûlures. Le paramètre Durée permet de programmer la durée en minutes séparant les mouvements de l’image. ● Modif. pixel (Arrêt / Activé): cette fonction permet de déplacer les pixels sur l’écran dans le sens vertical ou horizontal, afin d’éviter une image résiduelle sur l’écran. N Conditions optimales pour la modification des pixels Elément TV / HDMI Horizontal 0~4 4 Vertical 0~4 4 Durée (minute) 1~4 min 4 min Français◀ ▶ N La valeur Modif. pixel peut changer selon le mode et la taille de l’écran. N Cette fonction n’est pas disponible en mode Adapter à écran. ● Temps protection auto (Arrêt / 10 min / 20 min / 40 min / 1 heure): Si l’écran est inutilisé et affiche une image fixe pendant une durée définie par l’utilisateur, l’économiseur d’écran est activé de manière à prévenir la formation d’images parasites sur l’écran. ● Défilement: cette fonction supprime les images résiduelles à l’écran en déplaçant tous les pixels sur l’écran, selon le motif. Utilisez cette fonction lorsque des images résiduelles ou des symboles apparaissent à l’écran, en particulier lorsque vous affichez une image fixe à l’écran pendant une longue période. Français◀ ▶ N La fonction de suppression d’images résiduelles doit être exécutée pendant longtemps (environ une heure) pour supprimer efficacement les images résiduelles. Si l’image résiduelle n’est pas supprimée après l’exécution de cette fonction, répétez l’opération. N Appuyez sur n’importe quelle touche de la télécommande pour annuler cette fonction. ● Gris de bord (Clair / Sombre): si vous regardez la télévision dans un rapport d’écran 4:3, l’écran est protégé contre tout dommage grâce à l’ajustement de la balance des blancs sur les côtés gauche et droit. Français◀ ▶ ■ Général O MENUm → Système → Général → ENTERE ● Mode Jeu (Arrêt / Activé): lorsque vous connectez une console de jeux, telle qu’une PlayStation™ ou Xbox™, vous pouvez bénéficier d’une expérience ludique encore plus réaliste en sélectionnant le mode Jeu. N REMARQUE ● Précautions et restrictions du mode Jeu – Pour déconnecter la console de jeux et connecter un autre périphérique externe, définissez Mode Jeu sur Arrêt dans le menu de configuration. – Si vous affichez le menu du téléviseur en Mode Jeu, l’écran tremble légèrement. Français◀ ▶ ● Le Mode Jeu n'est pas disponible en mode TV. ● Après avoir connecté la console de jeux, définissez le Mode Jeu sur Activé. Malheureusement, il se peut que la qualité d'image soit moins bonne. ● Si Mode Jeu est défini sur Activé: – Le Mode Image est défini sur Standard et le Mode Son sur Cinéma. ● Verr. Touches (Arrêt / Activé): permet de verrouiller ou déverrouiller toutes les touches du panneau. ● Affich. logo (Arrêt / Activé): affichez le logo Samsung au démarrage de la TV. Français◀ ▶ ■ DivX® Vidéo à la demande O MENUm → Système → DivX® Vidéo à la demande → ENTERE affiche le code d’enregistrement autorisé pour le téléviseur. Connectez-vous au site Web DivX et enregistrez-vous à l’aide du code d’enregistrement à 10 chiffres pour pouvoir télécharger le fichier d’activation VOD. Une fois que vous exécutez ce dernier à l’aide de Vidéos, l’enregistrement est terminé. N Pour plus d'informations sur DivX® VOD, rendez-vous sur le site Web http:// vod.divx.com. Français◀ ▶ ■ Interface commune O MENUm → Système → Interface commune → ENTERE ● CI Menu: permet à l’utilisateur d’opérer une sélection dans le menu du module CAM. Sélectionnez le menu CI en fonction du menu PC Card. ● Infos sur l’application: affiche des informations sur le module CAM inséré dans l’emplacement CI et sur la "CARTE CI ou CI+" insérée dans le module CAM. Vous pouvez installer le module CAM, que le téléviseur soit allumé ou éteint. 1. Vous pouvez acheter un module CI CAM chez le revendeur le plus proche ou le commander par téléphone. 2. Insérez fermement la "CARTE CI ou CI+" dans le module CAM en suivant le sens de la flèche. 3. Insérez le module CAM avec la "CARTE CI ou CI+" dans la fente de l’interface commune (dans le sens de la flèche), de telle sorte qu’il soit aligné parallèlement à la fente. 4. Vérifiez si une image est visible sur une chaîne à signal brouillé. Français◀ ▶ ❑ Menu Assistance ■ e-Manual O MENUm → Assistance → e-Manual → ENTERE Vous pouvez lire l'introduction et les instructions relatives aux fonctions de votre TV. N Pour plus d'informations sur l'écran du Manuel électronique, reportez-vous à la section "Consultation du manuel électronique" du Manuel de l'utilisateur. Français◀ ▶ ■ Diagnost. auto. O MENUm → Assistance → Diagnost. auto. → ENTERE N Le Diagnost. auto. peut prendre quelques secondes ; ce phénomène est normal. ● Test de l’image (Oui / Non): Utilisez cette option pour rechercher d'éventuels problèmes d'image. ● Test du son (Oui / Non): utilisez la mélodie intégrée pour rechercher d’éventuels problèmes sonores. N Si les haut-parleurs du téléviseur restent muets, avant d’effectuer le test du son, vérifiez que l’option Sélection Haut-parleur est réglée sur Hautparleur TV dans le menu Son. pour les téléviseurs LED et plasma N La mélodie est diffusée pendant le test, même si l’option Sélection Hautparleur est réglée sur Haut-parleur ext ou si le son a été désactivé en appuyant sur le bouton MUTE. pour les téléviseurs LED et plasma Français◀ ▶ ● Informations de signal: (chaînes numériques uniquement) soit la qualité de réception des chaînes HDTV est parfaite, soit les chaînes ne sont pas disponibles. Réglez votre antenne afin d’augmenter l’intensité du signal. ● Réinit.: rétablit tous les paramètres par défaut, à l'exception des paramètres réseau. N L’écran de saisie du code PIN s’affiche après l’écran de configuration. N Entrez votre code PIN à quatre chiffres. Modifiez le code PIN à l’aide de l’option Modifier PIN. ● Résolution des problèmes: consultez cette description s’il vous semble que le téléviseur rencontre un problème. N Si aucun des conseils de dépannage ne s’applique au problème rencontré, contactez le service clientèle de Samsung. Français◀ ▶ ■ Mise à niveau du logiciel O MENUm → Assistance → Mise à niveau du logiciel → ENTERE La Mise à niveau du logiciel peut être effectuée en téléchargeant le dernier micrologiciel depuis le site "www.samsung.com" vers une unité de stockage USB. Version actuelle-indique que le logiciel est déjà installé sur votre téléviseur. Installation de la version la plus récente ● USB: insérez la clé USB contenant le fichier de mise à niveau du microprogramme téléchargé sur www.samsung.com dans le téléviseur. Veillez à ne pas couper l’alimentation, ni retirer la clé USB tant que les mises à niveau ne sont pas terminées. Une fois la mise à niveau du microprogramme terminée, le téléviseur se met automatiquement hors tension, puis se rallume. Lorsque la mise à niveau du logiciel est terminée, les paramètres vidéo et audio par défaut sont réinitialisés. Il est conseillé de prendre note des paramètres afin de pouvoir les rétablir facilement après la mise à niveau. Français◀ ▶ ● En ligne pour les téléviseurs plasma de la série 490 : permet de mettre à niveau le logiciel par Internet. N Commencez par configurer votre réseau. Pour plus d'informations sur l'utilisation de la fonction Network Setup (Configuration du réseau), reportez-vous à la section "Paramètres réseau". N Si la connexion Internet ne fonctionne pas correctement, il se peut que la connexion soit interrompue. Réessayez le téléchargement. Si le problème persiste, effectuez la procédure de téléchargement USB et procédez à la mise à niveau. Français◀ ▶ ● Canal: met à niveau le logiciel en utilisant le signal de télédiffusion. N Si la fonction est sélectionnée pendant la période de transmission du logiciel, ce dernier est automatiquement recherché et téléchargé. N Le temps nécessaire au téléchargement du logiciel dépend de l’état du signal. ● Autre logiciel: remplace le logiciel actuel par la version de sauvegarde du logiciel. ● Mise à niveau en mode veille (Arrêt /1 h. plus tard / 2 h. plus tard / 00:00 / 02:00 / 12:00 / 14:00): Une mise à niveau manuelle sera automatiquement effectuée au moment que vous avez choisi. Etant donné que le courant est activé de façon interne, l'écran peut s'allumer brièvement pour le produit. Ce phénomène peut se produire pendant plus d'une heure, jusqu'à ce que la mise à jour logiciel soit terminée. Français◀ ▶ ■ Contacter Samsung O MENUm → Assistance → Contacter Samsung → ENTERE Consultez ces informations si le téléviseur ne fonctionne pas correctement ou si vous voulez mettre à niveau le logiciel. Vous y trouverez des informations concernant nos centres d’appel, ainsi que le téléchargement de nos produits et logiciels. Français◀ ▶ ■ Accueil contenu O MENUm → Assistance → Accueil contenu → ENTERE Vous bénéficiez de contenu utile et varié. Français◀ ▶ Fonctions avancées ❑ Utilisation de la fonction 3D pour les téléviseurs plasma série 490 ■ 3D O MENUm → Image → 3D → ENTERE Cette nouvelle fonctionnalité vous permet de regarder du contenu 3D. Pour en profiter pleinement, vous devez acquérir des lunettes actives 3D Samsung afin de regarder des vidéos 3D. Ces lunettes sont vendues séparément. Pour obtenir des informations d'achat plus détaillées, contactez le revendeur qui vous a vendu ce téléviseur. N Le logo "Full HD 3D Glasses™" indique une compatibilité entre les produits d'affichage et les lunettes 3D conformes au format "Full HD 3D Glasses™". Cela n'indique pas la qualité d'image des produits d'affichage. Français◀ ▶ Regarder la télévision à l'aide de la fonction 3D INFORMATIONS IMPORTANTES SUR LA SECURITE ET LA PROTECTION DE LA SANTE CONCERNANT LES IMAGES EN 3D. Il est important de lire attentivement et de bien comprendre les informations de sécurité suivantes avant d'utiliser la fonction 3D de votre téléviseur. [AVERTISSEMENT ● Certaines personnes peuvent être victimes de vertiges, nausées et maux de tête lorsqu'elles regardent la télévision en 3D. Si vous présentez des symptômes de ce type, arrêtez de regarder la télévision en 3D, retirez les lunettes actives 3D et reposez-vous. ● Le fait de regarder des images 3D pendant une période prolongée peut causer une fatigue oculaire. Si vous présentez ce type de symptôme, arrêtez de regarder le téléviseur 3D, retirez les lunettes actives 3D et reposez-vous. Français◀ ▶ ● Des adultes doivent régulièrement vérifier que tout se passe bien pour les enfants qui utilisent la fonction 3D. Si un enfant se plaint de fatigue oculaire, de maux de tête, de vertiges ou de nausées, demandez-lui d'arrêter de regarder la télévision en 3D et de se reposer. ● N'utilisez pas les lunettes actives 3D à d'autres fins (par exemple, comme lunettes de vue, de soleil ou de protection). ● N'utilisez pas la fonction 3D ou les lunettes actives 3D lorsque vous marchez ou vous vous déplacez. Si vous utilisez la fonction 3D ou les lunettes actives 3D en vous déplaçant, vous pouvez vous blesser en trébuchant, en chutant et/ou en percutant des objets. Français◀ ▶ ● Mode 3D: permet de sélectionner le format d'entrée 3D. N Pour profiter pleinement de l'effet 3D, mettez les lunettes actives 3D, puis sélectionnez l'un des modes 3D décrits dans la liste ci-dessous pour obtenir une qualité 3D optimale. N Lorsque vous regardez des images 3D, allumez les lunettes actives 3D. Mode 3D Opération Arrêt Désactive la fonction 3D. 2D → 3D Change une image 2D en 3D. Côte à côte Affiche deux images côte à côte. Haut & Bas Affiche les images l'une au-dessus de l'autre. Français◀ ▶ N Certains formats de fichier ne sont pas pris en charge par le mode "2D → 3D". N Lorsque vous regardez des images 3D sous une lumière tremblotante comme une lampe fluorescente (50 Hz ~ 60 Hz) ou une lampe à 3 longueurs d'onde, il se peut que l'écran scintille légèrement. Si tel est le cas, atténuez l'intensité de l'éclairage ou éteignez la lumière. ● Perspective 3D (-5 ~ +5): permet de régler la perspective 3D globale de l'image à l'écran. ● Profondeur (1~10): permet de régler la profondeur globale. ● Modification G/D (Image G/D / Image D/G): intervertit les images gauche et droite. Français◀ ▶ Résolution prise en charge (16:9 uniquement) ● HDMI Source Résolution Fréquence (Hz) / 1280 x 720p 50 / 59.94 / 60 Hz 1920 x 1080i 50 / 59.94 / 60 Hz 1920 x 1080p 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60 Hz Frame Packing 1280 x 720p 50 / 59.94 / 60 Hz 1920 x 1080i 50 / 59.94 / 60 Hz 1920 x 1080p 23.98 / 24 / 25 / 29.97 / 30 Hz Français◀ ▶ ● Composant & DTV Source Résolution Fréquence (Hz) Composant 1280 x 720p 50 / 59.94 / 60 Hz 1920 x 1080i 50 / 59.94 / 60 Hz 1920 x 1080p 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60 Hz DTV 1280 x 720p 50 / 59.94 / 60 Hz 1920 x 1080i 50 / 59.94 / 60 Hz 1920 x 1080p 25 Hz ● Vidéos / Photos (dans AllShare Play) Reportez-vous à "Formats de sous-titres et de fichiers AllShare Play pris en charge" dans la section Autres informations. Français◀ ▶ Visionnage d'une image 3D ● Méthode 1 N Selon le format de l'image source, certains modes 3D peuvent ne pas être disponibles. N Pour regarder la TV en 3D, mettez lunettes 3D, puis appuyez sur bouton mise en marche. 1. Appuyez sur le bouton MENU, utilisez le bouton ▲ ou ▼ pour sélectionner Image, puis appuyez sur le bouton ENTERE. 2. Utilisez le bouton ▲ ou ▼ pour sélectionner 3D, puis appuyez sur le bouton ENTERE. Français◀ ▶ 3. Utilisez le bouton ▲ ou ▼ pour sélectionner Mode 3D, puis appuyez sur le bouton ENTERE. 4. A l'aide des boutons ◄ ou ►, sélectionnez le Mode 3D de l'image à visualiser. ● Méthode 2 1. Appuyez sur le bouton W. Vous pouvez alors visionner l'image en 3D. 2. Pour modifier les options 3D (telles que Perspective 3D), appuyez sur le bouton MENU, puis sélectionnez Image. 3. Accédez à l'étape 3 de la "Méthode 1" et suivez les instructions à partir de ce point. N Pour quitter le mode 3D, appuyez à nouveau sur le bouton W. Français◀ ▶ Avant d'utiliser la fonction 3D... N REMARQUE ● Le 3D Mode est automatiquement défini sur Arrêt lors de l'accès aux fonctions AllShare Play ou e-Manual. ● Le 3D Mode est défini automatiquement sur la valeur de configuration mémorisée en cas de changement de la source d'entrée. ● Certaines fonctions Image sont désactivées en mode 3D. ● PIP n'est pas pris en charge en mode 3D. ● Il se peut que les lunettes actives 3D d'un modèle antérieur de Samsung (de type IR) ou d'autres fabricants ne soient pas prises en charge. ● Lors de la mise en marche initiale du téléviseur, l'optimisation de l'écran 3D peut prendre quelques instants. Français◀ ▶ ● En cas de proximité avec un autre appareil 3D ou électronique, il est possible que les lunettes actives 3D ne fonctionnent pas correctement. En cas de problème, placez les autres appareils électroniques le plus loin possible des lunettes actives 3D. ● Veillez à rester dans l'angle de visualisation et à une distance de visualisation du téléviseur optimale lorsque vous regardez des images 3D. ● Sinon, vous risquez de ne pas pouvoir profiter des effets 3D attendus. ● La distance de visualisation idéale doit correspondre à au moins trois fois la hauteur de l'écran. Nous recommandons à l'utilisateur de s'asseoir de sorte que ses yeux soient au même niveau que l'écran. Français◀ ▶ ❑ Utilisation du contenu multimedia Profitez des photos, des fichiers musicaux et des films enregistrés sur un périphérique de stockage de masse USB de la classe MSC. 1. Appuyez sur le bouton CONTENT pour sélectionner Media Play / AllShare Play Uniquement pour les téléviseurs plasma de la série 490 . 2. Appuyez sur le bouton ▲/▼ afin de sélectionner le menu de votre choix (Vidéos, Photos, Musique), puis appuyez sur le bouton ENTERE. 3. Appuyez sur le bouton ▲/▼ pour sélectionner le périphérique de votre choix et appuyez ensuite sur ENTERE. Français◀ ▶ ❑ Connexion d'un périphérique USB 1. Allumez votre téléviseur. 2. Connectez un périphérique USB contenant des photos ou des fichiers musicaux au port USB sur le côté du téléviseur. 3. Lorsqu'un périphérique USB est connecté au téléviseur, une fenêtre contextuelle s'ouvre. Vous pouvez sélectionner directement Vidéos, Photos ou Musique. N Il se peut que le fonctionnement ne soit pas correct avec des fichiers multimédia sans licence. N Liste des choses à savoir avant d'utiliser le contenu multimedia ● Le protocole MTP (Media Transfer Protocol) n'est pas pris en charge. ● Le système de fichiers prend en charge les formats FAT16, FAT32 et NTFS. ● Il est possible que certains types d'appareils photo numériques et de périphériques audio USB ne soient pas compatibles avec ce téléviseur. Français◀ ▶ ● Media Contents ne prend en charge que les périphériques de stockage de masse USB. Ceux-ci sont dédiés aux périphériques de transport de masse uniquement. Il s'agit notamment des clés USB et lecteurs de cartes Flash (les concentrateurs USB ne sont pas pris en charge). Les périphériques doivent être connectés directement au port USB du téléviseur. ● Avant de connecter l'appareil au téléviseur, sauvegardez vos fichiers afin d'éviter qu'ils ne soient endommagés ou que des données ne soient perdues. SAMSUNG ne saurait, en aucun cas, être tenu responsable de la perte de données ou de l'endommagement d'un fichier de données. ● Le disque dur connecté au port USB n'est pas pris en charge. ● Ne déconnectez pas le périphérique USB en cours de chargement. ● Plus la résolution de l'image est élevée, plus le temps d'affichage à l'écran sera long. ● La résolution JPEG maximale prise en charge est de 15360 x 8640 pixels. Français◀ ▶ ● Pour les fichiers non pris en charge ou endommagés, le message "Not Supported File Format" s'affiche. ● Les fichiers MP3 avec gestion des droits numériques (DRM) téléchargés à partir d'un site payant ne peuvent pas être lus. La technologie DRM (Gestion des droits numériques) prend en charge la création de contenu, la distribution et la gestion intégrales du contenu (par exemple, la protection des droits et des intérêts des fournisseurs de contenu, la prévention de la copie illégale du contenu), ainsi que la gestion de la facturation et des règlements. ● Un périphérique USB nécessitant beaucoup de puissance (plus de 500 mA ou 5 V) ne sera peut-être pas pris en charge. ● Si le téléviseur ne reçoit aucun signal d'entrée pendant la période configurée sous l'option Temps protection auto, l'économiseur d'écran s'active. ● Le mode d'économie d'énergie de certains disques durs externes peut être désactivé automatiquement lors d'une connexion au téléviseur. Français◀ ▶ ● Si un câble d'extension USB est utilisé, il se peut que le périphérique USB ne soit pas reconnu ou que les fichiers qui y sont stockés ne soient pas lus. ● Si un périphérique USB connecté au téléviseur n'est pas reconnu, si la liste des fichiers qui y sont stockés est altérée ou si un fichier de la liste est illisible, connectez le périphérique en question à l'ordinateur, formatez le périphérique et vérifiez la connexion. ● Si un fichier supprimé depuis le PC apparaît encore lors de l'utilisation du contenu multimedia, utilisez la fonction "Vider la Corbeille" de l'ordinateur pour supprimer définitivement ce fichier. ● Le contenu multimedia prend uniquement en charge le format JPEG séquentiel. ● Les fonctions de recherche de scène et de miniature ne sont pas prises en charge dans l'option Vidéos. ● Si le nombre de fichiers et dossiers enregistrés sur un périphérique de stockage USB est supérieur à environ 4 000, certains peuvent ne pas apparaître et certains dossiers sont susceptibles de ne pas pouvoir être ouverts. Français◀ ▶ Déconnexion d'un périphérique USB ● Méthode 1 : à l'aide du bouton SOURCE. 1. Appuyez sur le bouton SOURCE. 2. Sélectionnez le périphérique USB souhaité, puis appuyez sur le bouton TOOLS. Le menu Outils apparaît. 3. Sélectionnez Retirer le périphérique USB en toute sécurité, puis attendez jusqu'à ce que le périphérique USB sélectionné soit déconnecté. Vous pouvez retirer le périphérique USB du téléviseur. Français◀ ▶ ● Méthode 2 : à l'aide de l'écran d'accueil Media Play / AllShare Play Uniquement pour les téléviseurs plasma de la série 490 . 1. Accédez à l'écran d'accueil Media Play / AllShare Play Uniquement pour les téléviseurs plasma de la série 490 . 2. Sélectionnez une catégorie, puis appuyez sur le bouton ENTERE. 3. Sélectionnez le périphérique USB souhaité, puis appuyez sur le bouton TOOLS. Le menu Outils apparaît. 4. Sélectionnez Retirer le périphérique USB en toute sécurité, puis attendez jusqu'à ce que le périphérique USB sélectionné soit déconnecté. Vous pouvez retirer le périphérique USB du téléviseur. N Pour retirer un périphérique USB du téléviseur, nous recommandons d'utiliser la fonction Retirer le périphérique USB en toute sécurité. Français◀ ▶ ❑ Connexion à l'ordinateur par le biais du réseau pour les téléviseurs plasma série 490 Vous pouvez lire les images, la musique et les vidéos enregistrées sur votre ordinateur à l'aide d'une connexion réseau en mode AllShare Play sur votre téléviseur. N Si vous souhaitez utiliser la fonction AllShare Play pour lire sur votre téléviseur des fichiers enregistrés sur votre PC, vous devez télécharger "AllShare PC Software" et le manuel utilisateur sur le site Web "www. samsung.com". 1. Pour plus d'informations sur la configuration de votre réseau, reportez-vous à la section "Connexion réseau". – Nous recommandons de placer le téléviseur et l'ordinateur sur le même sous-réseau. Les 3 premières parties de l’adresse IP du téléviseur et de l’ordinateur doivent être les mêmes. Seule la dernière partie (adresse de l’hôte) doit être modifiée. (par exemple, Adresse IP : 123.456.789.**) Français◀ ▶ 2. A l'aide d'un câble réseau, connectez le modem externe et l'ordinateur sur lequel le programme AllShare PC Software sera installé. – Vous pouvez connecter directement le téléviseur à un ordinateur sans passer par un routeur. N Fonctions non prises en charge lors de la connexion à un ordinateur via un réseau : ● Fonctions Musique de fond activ. et Paramètres de musique de fond. ● Le bouton �(Retour arrière) ou µ (Avance rapide) pendant la lecture d'un film. N Les sous-titres intégrés multi-audio DivX DRM ne sont pas pris en charge. N AllShare PC Software doit être autorisé par le pare-feu de l'ordinateur. Français◀ ▶ N Lors de l'utilisation du mode AllShare Play sur une connexion réseau, selon les fonctions du serveur fourni : ● La méthode de tri peut varier. ● Il se peut que le bouton � (Retour arrière), µ (Avance rapide) ou � (Pause) ne fonctionne pas suivant les informations de contenu. N Si la vidéo est saccadée lors de la lecture sur un réseau sans fil, nous vous recommandons d’utiliser un réseau câblé. Français◀ ▶ ❑ Affichage Accédez au fichier souhaité à l'aide des boutons ◄/►/▲/▼, puis appuyez sur le bouton ENTERE ou �(Lecture). L'écran peut changer en fonction du mode d'accès. �µAutre page❑❑ELecture❑❑T Outils❑❑R Retour Information: AllShare Play / Vidéos / SUM / 500 Days of... .avi 1/15 Vous pouvez vérifier le nom du périphérique, le mode de contenu, le nom du dossier/fichier et la page. Information: Vous pouvez vérifier le nom, la taille et la date de création du fichier sélectionné. Boutons d'opération: - ELecture: lit le fichier sélectionné. - T Outils: affiche le menu d'options. - R Retour: permet de revenir à l'étape précédente. - �µ/b{ Autre page: permet d'accéder à la page précédente ou suivante. Section Liste des fichiers: vous pouvez vérifier les fichiers et groupes classés par catégorie. * L'image affichée peut varier en fonction du modèle. Français◀ ▶ ■ Vidéos Lecture d'une vidéo 1. Appuyez sur le bouton ◄/►/▲/▼ afin de sélectionner la vidéo de votre choix dans la liste des fichiers. 2. Appuyez sur le bouton ENTERE ou �(Lecture). – Le nom du fichier sélectionné s'affiche en haut de l'écran avec le temps de lecture. – Si les informations sur la durée de la vidéo sont inconnues, la durée de lecture et la barre de progression ne s'affichent pas. – Pendant la lecture d'une vidéo, vous pouvez effectuer une recherche à l'aide des boutons ◄ et ►. – Vous pouvez utiliser les boutons (�) (Retour rapide) et (µ) (Avancerapide) lors de la lecture. N Ce mode vous permet de profiter des séquences vidéo d'un jeu vidéo, mais pas de jouer au jeu proprement dit. Français◀ ▶ ● Formats de sous-titres pris en charge – Externe Nom Extension de fichier MPEG-4 timed text .ttxt SAMI .smi SubRip .srt SubViewer .sub Micro DVD .sub ou .txt SubStation Alpha .ssa Advanced SubStation Alpha .ass Powerdivx .psb – Interne Nom Conteneur Format Xsub AVI Format image SubStation Alpha MKV Format texte Advanced SubStation Alpha MKV Format texte SubRip MKV Format texte MPEG-4 Timed text MP4 Format texte Français◀ ▶ ● Formats vidéo pris en charge Extension de fichier Conteneur Codec vidéo Résolution Fréquence d'images (i/s) Débit binaire (Mbit/s) Codec audio *.avi *.mkv *.asf *.wmv *.mp4 *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.m2ts *.mts *.divx AVI MKV ASF MP4 3GP VRO VOB PS TS DivX 3.11/4.x/5.x/6.1 1920 x 1080 6~30 30 AC3 LPCM ADMPCM (IMA, MS) AAC HE-AAC WMA DD+ MPEG (MP3) DTS Core MPEG4 SP/ASP H.264 BP/MP/HP Motion JPEG 640 x 480 8 Window Media Video v9 MPEG2 1920 x 1080 30 MPEG1 Français◀ ▶ Autres restrictions ● Le contenu vidéo ne sera pas lu, ou ne sera pas lu correctement, si une erreur est présente dans le contenu ou sur le suport. ● Il se peut que le son ou la vidéo ne fonctionne pas si le contenu présente un débit binaire/une fréquence d'images standard supérieur au taux d'images par seconde repris dans le tableau ci-dessus. ● Si une erreur survient dans la table d'index, la fonction de recherche (saut) n'est pas prise en charge. ● Lors de la lecture de la vidéo via le réseau, il se peut que celle-ci échoue en fonction de l'état du réseau. Si vous lisez une vidéo sur une connexion réseau, des saccades risquent d'apparaître. avec les téléviseurs plasma de la série 490 ● Certains périphériques USB/caméra numériques peuvent ne pas être compatibles avec le lecteur. ● Le menu risque de s'afficher au bout d'un certain temps si la vidéo dépasse 10Mbit/s (débit binaire). Français◀ ▶ Décodeur vidéo Décodeur audio ● Prise en charge jusqu'à H.264 niveau 4.1 ● Les normes H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 et AVCHD ne sont pas prises en charge. ● GMC n'est pas pris en charge. ● WMA prend en charge jusqu'au canal 10 Pro 5.1 et au profil M2. (Le mode LBR de M0 n'est pas pris en charge.) ● WMA Lossless audio n'est pas pris en charge. Français◀ ▶ ■ Photos Visualisation d'une photo (ou d'un diaporama) 1. Appuyez sur le bouton ◄/►/▲/▼ afin de sélectionner la photo souhaitée dans la liste des fichiers. 2. Appuyez sur le bouton ENTERE. N Pendant le diaporama, tous les fichiers de la liste sont affichés dans l'ordre. N Lorsque vous appuyez sur le bouton � (Lecture) dans la liste des fichiers, le diaporama démarre immédiatement. N Pendant le diaporama, vous pouvez régler la vitesse de défilement à l'aide du bouton � (REW) ou µ (FF). N Le bouton ◄ ou ► vous permet d'accéder à un autre fichier. N Des fichiers musicaux peuvent être lus automatiquement pendant le diaporama si l'option Musique de fond activ. est définie. Français◀ ▶ ● Formats de photo pris en charge Extension de fichier Type Résolution *.jpg JPEG 15360 X 8640 *.bmp BMP 1920 X 1080 *.mpo MPO 15360 X 8640 Français◀ ▶ ■ Musique Lecture d'un fichier musical 1. Appuyez sur le bouton ◄/►/▲/▼ pour sélectionner le fichier musical de votre choix dans la liste des fichiers. 2. Appuyez sur le bouton ENTERE ou �(Lecture). – Vous pouvez utiliser les boutons � (Retour rapide) et µ (Avancerapide) lors de la lecture. N Seuls les fichiers musicaux dont l'extension est prise en charge sont affichés. Les autres extensions de fichier ne sont pas affichées, même si elles sont enregistrées sur le même périphérique USB. N Si le son est déformé lors de la lecture des fichiers musicaux, réglez l'option Egaliseur dans le menu Son. (Un fichier musical surmodulé peut être à l'origine d'un problème sonore.) Français◀ ▶ N Utilisation du menu de lecture – Appuyez sur le bouton ◄/► pour sélectionner le menu de votre choix. ● Lecture / Pause: vous pouvez lancer ou arrêter une musique. Une autre solution consiste à utiliser la touche � ou � de la télécommande. ● Mode Répétition (Arrêt / 1 musique / Tous): vous pouvez lire des fichiers musicaux en boucle. ● Mode aléatoire (Arrêt / Activé): vous pouvez lire la musique de manière aléatoire. ● Mode Son (Standard / Musique / Cinéma / Voix claire / Amplifier): vous pouvez régler les paramètres sonores. Français◀ ▶ ● Formats musicaux pris en charge Extension de fichier Type Codec Remarque *.mp3 MPEG Niveau audio MPEG1 3 *.m4a *.mpa *.aac *.3ga MPEG4 AAC *.flac FLAC FLAC • La fonction de recherche n'est pas prise en charge. Prise en charge jusqu'à 2 canaux. *.ogg OGG Vorbis • Prise en charge jusqu'à 2 canaux. *.wma WMA WMA • WMA prend en charge jusqu'au canal 10 Pro 5.1 et au profil M2. (Le mode LBR de M0 n'est pas pris en charge.) Français◀ ▶ ❑ Contenu multimedia - Fonctions supplémentaires Lecture des fichiers vidéo/audio/photos sélectionnés 1. Appuyez sur la touche TOOLS dans chaque écran principal et sélectionnez ensuite Lire sélection. 2. Sélectionnez les fichiers de votre choix. N Une marque de sélection s'affiche à gauche des fichiers sélectionnés. 3. Appuyez sur le bouton ► pour sélectionner Lecture. N Vous pouvez sélectionner ou désélectionner tous les fichiers en appuyant sur Sélectionner tout / Tout désélectionner. Français◀ ▶ Menu d'options pour la lecture de Vidéos/Musique/Photos Pendant la lecture d'un fichier, appuyez sur le bouton TOOLS. Catégorie Opération Vidéos Photos Musique Recherche titre Vous pouvez directement déplacer l'autre fichier. c Recher. temps Vous pouvez rechercher la vidéo à l'aide des boutons ◄et ► toutes les minutes ou en entrant directement le numéro correspondant. N Cette fonction peut ne pas être prise en charge, en fonction de la source. c Mode Répétition Vous pouvez lire des fichiers films en boucle. c Format de l'image Vous pouvez régler le format de l'image selon vos besoins. c Mode Image Vous pouvez régler les paramètres d'image. c c Mode Son Vous pouvez régler les paramètres sonores. c c Français◀ ▶ Catégorie Opération Vidéos Photos Musique Langue audio Vous pouvez modifier la langue audio si la vidéo en comporte plusieurs. c Sous-titres Vous pouvez activer/désactiver les sous-titres. c Param. de sous-titre Vous pouvez visionner la vidéo avec des sous-titres. Cette fonction n'est active que lors de la lecture de fichiers de type streaming prenant en charge plusieurs formats audio. c Lancer le diaporama / Arrêter le diaporama Vous pouvez lancer ou arrêter un diaporama. c Vit. diaporama Vous pouvez sélectionner la vitesse du diaporama pendant sa diffusion. c Musique de fond activ. / Musique de fond désac. Vous pouvez activer/désactiver le fond musical lors du visionnage d'un diaporama. c Français◀ ▶ Catégorie Opération Vidéos Photos Musique Paramètres de musique de fond Vous pouvez sélectionner le fond musical d'un diaporama. c Zoom Vous pouvez effectuer un zoom sur des images lorsque vous êtes en mode Plein écran. c Pivoter Vous pouvez faire pivoter des images lorsque vous êtes en mode Plein écran. c Modif liste lec Vous pouvez modifier la liste de lecture en cours de lecture de la musique de votre choix. c Lire sélection Vous pouvez sélectionner et lire plusieurs fichiers. c Information Vous pouvez consulter des informations détaillées sur le fichier en cours de lecture. c c c Français◀ ▶ ❑ Utilisation des fonctions DLNA pour les téléviseurs plasma série 490 Vous pouvez lire du contenu multimédia (photos, vidéos et musique) enregistré sur votre téléphone portable ou d'autres appareils (un PC, par exemple) en le contrôlant sur le téléviseur via le réseau. N Commencez par configurer votre réseau. Pour plus d'informations sur l'utilisation de la fonction Network Setup (Configuration du réseau), reportezvous à la section "Paramètres réseau". N Pour plus d’informations, rendez-vous sur "www.samsung.com" ou contactez le centre d’appel Samsung. Il peut s’avérer nécessaire d’installer des logiciels supplémentaires sur l’appareil mobile. Pour plus d’informations à ce sujet, reportez-vous au mode d’emploi qui accompagne l’appareil mobile. N Si votre téléviseur Samsung est connecté à un serveur DLNA d'une autre marque, une erreur de compatibilité peut survenir lors de la lecture de vidéos. Français◀ ▶ N La connexion de votre téléviseur Samsung à un réseau via AllShare™ vous permet d'utiliser les fonctions originales de Samsung suivantes : – Lecture de différents formats vidéo (DivX, MP4, 3GPP, AVI, ASF, MKV, etc.) – Fonction de vidéo miniature – Fonction de signet (pour la reprise de la lecture d'une vidéo) – Chapitrage automatique (navigation entre les scènes) – Gestion de contenu numérique – Compatibilité avec différents formats de sous-titres (SRT, SMI, SUB, TXT, TTXT) – Recherche sur le nom de fichier – Et plus encore N Pour utiliser toutes les fonctions DLNA originales de Samsung, il est recommandé d'utiliser le logiciel AllShare™ fourni avec votre téléviseur. Français◀ ▶ Lecture du contenu multimédia enregistré sur les périphériques 1. Connectez le téléphone mobile ou un autre dispositif prenant en charge la fonction AllShare Play, puis lisez le contenu multimédia qui y est stocké. L'écran contextuel s'affiche au bas du téléviseur. 2. Sélectionnez Autor. pour accepter les périphériques connectés. La lecture du contenu multimédia des périphériques peut être en cours sur votre téléviseur. N Les périphériques autorisés sont indiqués dans le Paramètres AllShare. Français◀ ▶ Utilisez la fonction AllShare Play pour lire le contenu multimédia des périphériques connectés à la fonction DLNA. 1. Appuyez sur le bouton CONTENT pour sélectionner AllShare Play. 2. Appuyez sur le bouton ▲/▼ afin de sélectionner le menu de votre choix (Vidéos, Photos, Musique), puis appuyez sur le bouton ENTERE. 3. Une fois le périphérique DLNA sélectionné, appuyez à nouveau sur le bouton ENTERE. 4. Appuyez sur le bouton ◄/►/▲/▼ pour sélectionner le fichier de votre choix. 5. Appuyez sur le bouton ENTERE. Français◀ ▶ N REMARQUE ● En fonction de sa résolution et de son format, il se peut que le contenu ne soit pas lu sur le téléviseur. ● se peut que les boutons ENTERE et ◄/► ne fonctionnent pas avec certains types de contenu multimédia. ● Il est possible de contrôler la lecture à l'aide de l'appareil mobile. Pour plus d'informations, reportez-vous au mode d'emploi de l'appareil concerné. Français◀ ▶ Utilisation de la fonction Paramètres AllShare O MENUm → Réseau → Paramètres AllShare → ENTERE Affiche la liste des téléphones portables ou appareils connectés qui ont été configurés avec ce téléviseur en vue d'utiliser la fonction Paramètres AllShare. N La fonction Paramètres AllShare est disponible sur tous les appareils prenant en charge la fonction DLNA DMC. ● Autor. / Refuser: autorise/bloque les appareils. ● Supprimer: supprime les appareils de la liste. N Cette fonction efface uniquement de la liste le nom des appareils. Si l'appareil effacé s'allume ou tente de se reconnecter au téléviseur, il est possible qu'il s'affiche à nouveau. Français◀ ▶ ❑ Fonction Télétexte La page d’index du télétexte contient des instructions sur l’utilisation du service. Pour que les informations du télétexte s'affichent correctement, la réception des chaînes doit être stable. Autrement, des informations pourraient manquer ou certaines pages ne pas s’afficher. Vous pouvez changer de page de télétexte en appuyant sur les boutons numériques de la télécommande. ● 0 (mode): permet de sélectionner le mode Télétexte (LISTE/FLOF). Si vous appuyez sur ce bouton alors que le mode LISTE est sélectionné, il passe en mode d'enregistrement de liste. Dans ce mode, vous pouvez enregistrer une page télétexte dans une liste à l'aide du bouton 8 (mémoriser). ● / (Télétexte activé/mix/désactivé): active le mode télétexte pour la chaîne choisie. Appuyez deux fois sur ce bouton pour superposer le mode Télétexte à l'émission en cours de diffusion. Appuyez sur le bouton une nouvelle fois pour quitter le système télétexte. Informations supplémentaires Français◀ ▶ ● 1 (sous-page): permet d'afficher une page secondaire. ● 8 (mémoriser): permet de mémoriser les pages télétexte. ● 6 (index): permet d'afficher la page d'index du télétexte (sommaire). ● 4 (taille): permet d'afficher la moitié supérieure de l'écran en caractères deux fois plus grands. Pour afficher le texte dans la moitié inférieure de l'écran, appuyez une nouvelle fois sur ce bouton. Pour rétablir l'affichage normal, appuyez dessus une fois de plus. ● 9 (maintenir): arrête l'affichage sur la page en cours, au cas où plusieurs pages secondaires suivraient automatiquement. Pour annuler, appuyez de nouveau sur cette touche. ● 2 (page suivante): affiche la page suivante du télétexte. ● 3 (page précédente): affiche la page précédente du télétexte. Français◀ ▶ ● 5 (révéler): affiche le texte masqué (les réponses à un questionnaire, par exemple). Appuyez à nouveau sur ce bouton Appuyez à nouveau sur ce bouton pour rétablir le mode d'affichage normal. ● 7 (annuler): réduit l'écran télétexte pour le superposer sur l'émission en cours. ● Boutons de couleur (rouge, vert, jaune, bleu): si la société de radiodiffusion utilise le système FASTEXT, les différents sujets traités dans la page télétexte disposent d'un code couleur et peuvent être sélectionnés à l'aide des boutons de couleur de la télécommande. Appuyez sur la couleur correspondant au sujet de votre choix. Une nouvelle page avec code couleur est affichée. Les éléments peuvent être sélectionnés de la même manière. Pour afficher la page précédente ou suivante, appuyez sur le bouton de couleur correspondant. Français◀ ▶ Les pages de télétexte sont organisées en six catégories : Catégorie Contenu A Numéro de la page sélectionnée. B Identité de la chaîne émettrice. C Numéro de la page actuelle ou indications de recherche. D Date et heure. E Texte. F Informations sur l'état. Informations FASTEXT. A E F B C D Français◀ ▶ ❑ Verrou antivol Kensington Le verrou antivol Kensington n’est pas fourni par Samsung. L’antivol Kensington est un dispositif utilisé pour fixer physiquement le système lorsqu’il est utilisé dans un endroit public. L’aspect du verrou et la méthode de verrouillage peuvent différer de l’illustration en fonction du fabricant. Consultez le manuel fourni avec le verrou Kensington pour obtenir des instructions d’utilisation supplémentaires. N Une icône “K” est présente à l’arrière du téléviseur. Un verrou Kensington se trouve à côté de l’icône “K”. N L’emplacement et la couleur peuvent varier en fonction du modèle. Pour verrouiller l'appareil, procédez comme suit : 1. Enroulez le câble de verrouillage Kensington autour d’un objet large et fixe tel qu’un bureau ou une chaise. Arrière du téléviseur Optionnel Français◀ ▶ 2. Glissez le bout du câble auquel est attaché le verrou dans la boucle du câble de verrouillage Kensington. 3. Insérez le dispositif de verrouillage dans la fente Kensington de l’appareil. 4. Fermez le verrou. N Ces instructions sont d’ordre général. Pour de plus amples informations, consultez le manuel d’utilisation fourni avec le dispositif de verrouillage. N Le dispositif de verrouillage est vendu séparément. Français◀ ▶ ❑ Emplacement pour interface commune pour les connexions Pour regarder les chaînes payantes, la carte CI ou CI+ doit être insérée. ● Si vous ne l'insérez pas, certaines chaînes afficheront le message "Signal brouillé". ● Les informations de pairage contenant un numéro de téléphone, l'ID de la carte CI ou CI+, l'ID de l'hôte et d'autres informations s'afficheront après 2 ou 3 minutes. Si un message d'erreur s'affiche, contactez votre fournisseur de service. ● Lorsque la configuration des informations sur les canaux est terminée, le message "Mise à jour terminée" s'affiche, indiquant que la liste des chaînes est mise à jour. * L'image peut varier en fonction du modèle. Français◀ ▶ N REMARQUE ● Vous devez vous procurer une "Carte CI ou CI+" auprès d’un câbloopérateur local. ● Lorsque vous sortez la "Carte CI ou CI+", tirez-la délicatement avec vos doigts. Une chute pourrait l’endommager. ● Insérez la "Carte CI ou CI+" dans le sens indiqué sur celle-ci. ● L'emplacement de la fente INTERFACE COMMUNE peut varier en fonction du modèle. ● La "Carte CI ou CI+" n’est pas prise en charge dans certains pays et certaines régions ; vérifiez auprès de votre revendeur agréé. ● Si vous rencontrez des problèmes, contactez le prestataire de service. ● Insérez la carte d'interface commune (CI ou CI+ CARD), qui prend en charge les paramètres actuels de l'antenne. L'image sera déformée, voire invisible. Français◀ ▶ ❑ Résolution des problèmes Si vous avez des questions sur le téléviseur, commencez par consulter la liste cidessous. Si aucun de ces conseils de dépannage ne s’applique, rendez-vous sur le site www.samsung.com et cliquez sur Support. Problèmes Solutions et explications Qualité de l'image Exécutez tout d'abord le Test de l'image pour vérifier que votre téléviseur affiche correctement l'image de test. (Accédez à MENU - Assistance - Diagnost. auto. - Test de l'image) Si l'image de test s'affiche correctement, sa qualité médiocre peut être due à la source ou au signal. Français◀ ▶ Problèmes Solutions et explications La qualité de l'image affichée par le téléviseur n'est pas aussi bonne que dans le magasin. ● Si vous possédez un décodeur câble / boîtier décodeur analogique, passez à un décodeur numérique. Utilisez des câbles HDMI ou Composant pour fournir une qualité d'image HD (haute définition). Le modèle LCD 420 ne prend pas en charge le mode AV, Composant ● Abonnés câble / satellite: essayez les chaînes HD dans la liste des canaux. ● Connexion de l'antenne: essayez les chaînes HD après avoir effectué une mémorisation automatique. ● De nombreuses chaînes HD sont mises à niveau par rapport à du contenu SD (définition standard). ● Réglez la résolution de sortie vidéo du décodeur câble/boîtier décodeur sur 1080i ou 720p. ● Veillez à respecter la distance minimale recommandée entre vous et le téléviseur (distance basée sur la taille et la définition du signal). Français◀ ▶ Problèmes Solutions et explications L'image est déformée : macrobloc, petit bloc, points, pixellisation ● La compression de contenu vidéo peut engendrer une déformation de l'image, en particulier pour les mouvements rapides comme le sport et les films d'action. ● Un niveau de signal faible ou de mauvaise qualité peut déformer l'image. Il ne s'agit pas d'un problème lié au téléviseur. ● Utiliser un téléphone portable à proximité d’un téléviseur (jusqu’à 1 m environ) peut être source de parasites visuels sur les téléviseurs analogiques et numériques. Couleur incorrecte ou manquante. ● Si vous utilisez une connexion Composant, assurez-vous que les câbles Composant sont raccordés aux prises appropriées. Des raccordements desserrés ou incorrects peuvent engendrer des problèmes au niveau de la couleur ou un écran vide. Le modèle LCD 420 ne prend pas en charge le mode AV, Composant Français◀ ▶ Problèmes Solutions et explications La couleur ou la luminosité est de mauvaise qualité. ● Réglez les options Image dans le menu du téléviseur. (accédez au Mode Image / Couleur / Luminosité / Netteté) ● Réglez l'option Mode éco. dans le menu du téléviseur. (accédez à MENU - Système - Solution Eco - Mode éco.) ● Essayez de réinitialiser l'image pour en afficher les paramètres par défaut. (accédez à MENU - Image - Réinit. param. img) Il y a une ligne pointillée sur les bords de l'écran. ● Si la taille de l'image est définie sur Adapter à l’écran, réglez le paramètre sur 16:9. ● Changez la résolution du décodeur câble/boîtier décodeur. L'image est en noir et blanc. ● Si vous utilisez une entrée composite AV, connectez le câble vidéo (jaune) au connecteur vert de l'entrée composant 1 du téléviseur. Le modèle LCD 420 ne prend pas en charge le mode AV, Composant Français◀ ▶ Problèmes Solutions et explications Lors d'un changement de chaîne, l'image se bloque, est déformée ou s'affiche avec un léger décalage. ● En cas de raccordement à un décodeur câble, essayez de réinitialiser ce dernier. Rebranchez le cordon d'alimentation secteur et patientez jusqu'au redémarrage du décodeur câble. Cette opération peut prendre jusqu'à 20 minutes. ● Réglez la résolution de sortie du décodeur câble sur 1080i ou 720p. Qualité sonore Exécutez tout d'abord le Test du son pour vérifier que le système audio de votre téléviseur fonctionne correctement. (Accédez à MENU - Assistance - Diagnost. auto. - Test du son) Si le système audio fonctionne correctement, le problème lié au son peut provenir de la source ou du signal. Il n'y a aucun son ou celui-ci est trop faible au volume maximum. ● Vérifiez le volume de l'appareil externe connecté à votre téléviseur. Français◀ ▶ Problèmes Solutions et explications La qualité d'image est bonne, mais aucun son n'est émis. ● Réglez l'option Sélection Haut-parleur sur Haut-parleur TV dans le menu Son. pour les téléviseurs LED et plasma ● Si vous utilisez un appareil externe, assurez-vous que les câbles audio sont raccordés aux prises d'entrée audio appropriées du téléviseur. ● Si vous utilisez un appareil externe, vérifiez l'option de sortie audio de l'appareil connecté (il se peut, par exemple, que vous deviez définir l'option audio de votre décodeur câble sur HDMI si vous utilisez une connexion HDMI). ● Si vous utilisez un câble DVI-HDMI, un câble audio distinct est requis. ● Redémarrez le périphérique connecté en rebranchant le câble d'alimentation du périphérique. ● Si votre téléviseur est équipé d'une prise casque, assurez-vous que rien n'y est connecté. Français◀ ▶ Problèmes Solutions et explications Les haut-parleurs émettent un son inhabituel. ● Vérifiez les connexions des câbles. Vérifiez qu'aucun câble vidéo n'est raccordé à une entrée audio. ● Pour les connexions de télédistribution ou antenne, vérifiez l'intensité du signal. Un niveau de signal faible peut provoquer une distorsion sonore. Aucune image, aucune vidéo Le téléviseur ne s'allume pas. ● Vérifiez que le cordon d'alimentation secteur est branché correctement sur la prise murale et sur le téléviseur. ● Vérifiez que la prise murale est opérationnelle. ● Essayez d'appuyer sur le bouton POWER du téléviseur pour vous assurer que le problème n'est pas dû à la télécommande. Si le téléviseur s'allume, reportez-vous au problème "La télécommande ne fonctionne pas" ci-après. Français◀ ▶ Problèmes Solutions et explications Le téléviseur s'éteint automatiquement. ● Vérifiez que la fonction Veille est réglée sur Arrêt dans le menu Heure. ● Si votre PC est connecté au téléviseur, vérifiez les paramètres d'alimentation de votre PC. ● Vérifiez que le cordon d'alimentation secteur est branché correctement sur la prise murale et sur le téléviseur. ● Lorsque vous regardez la télévision sur une connexion de télédistribution ou antenne, le téléviseur s'éteint après 10 à 15 minutes en l'absence de signal. Français◀ ▶ Problèmes Solutions et explications Aucune image/vidéo n'est affichée. ● Vérifiez le raccordement des câbles (retirez tous les câbles connectés au téléviseur et aux appareils externes, puis rebranchez-les). ● Réglez les sorties vidéo de votre périphérique externe (décodeur câble/boîtier décodeur, DVD, Blu-ray, etc.) pour faire correspondre les connexions à l'entrée du téléviseur. Par exemple, si la sortie d'un périphérique externe est HDMI, vous devez établir une connexion avec une entrée HDMI du téléviseur. ● Vérifiez que les appareils connectés sont sous tension. ● Veillez à sélectionner la source appropriée du téléviseur en appuyant sur la touche SOURCE de la télécommande. ● Redémarrez le périphérique connecté en rebranchant le câble d'alimentation du périphérique. Français◀ ▶ Problèmes Solutions et explications Connexion RF (câble / antenne) Le téléviseur ne reçoit pas toutes les chaînes. ● Vérifiez que le câble de l'antenne est raccordé correctement. ● Essayez la fonction Configuration (configuration initiale) pour ajouter des chaînes disponibles à la liste. Accédez à MENU - Système - Configuration (configuration initiale) et attendez que toutes les chaînes disponibles soient mémorisées. ● Vérifiez que l'antenne est positionnée correctement. L'image est déformée : macrobloc, petit bloc, points, pixellisation ● La compression de contenu vidéo peut provoquer une déformation de l'image, en particulier pour les mouvements rapides comme le sport et les films d'action. ● Un niveau de signal faible peut déformer l'image. Il ne s'agit pas d'un problème lié au téléviseur. Français◀ ▶ Problèmes Solutions et explications Connexion au réseau pour les téléviseurs plasma de la série 490 Echec de la mise à niveau du logiciel sur le réseau. ● Essayez l'option Paramètres réseau dans le menu Réseau. ● Si vous disposez de la dernière version du logiciel, la mise à niveau ne sera pas effectuée. Autres L'image ne s'affiche pas en mode plein écran. ● Des barres noires s'affichent de chaque côté des chaînes HD lors de l'affichage de contenu SD (4:3) mis à niveau. ● Des barres noires s'affichent en haut et en bas des films dont le format d'image est différent de celui de votre téléviseur. ● Définissez les options de taille de l'image de votre appareil externe ou téléviseur sur Plein écran. Français◀ ▶ Problèmes Solutions et explications Le téléviseur à écran plasma émet un bourdonnement. pour les téléviseurs plasma ● En règle générale, les téléviseurs à écran plasma émettent un léger bourdonnement. Cela est tout à fait normal. Ce bruit résulte des charges électriques qui sont utilisées pour créer les images sur l’écran. ● Si le bourdonnement est fort, il se peut que la luminosité que vous avez réglée soit trop élevée. Essayez de réduire la luminosité. ● Le bourdonnement peut également être provoqué par une trop grande proximité entre un mur ou une autre surface dure et l’arrière de votre téléviseur à écran plasma. Vous pouvez également essayer de réacheminer vos câbles de connexion. ● Une installation incorrecte de la fixation murale peut créer un bruit excessif. Problème de rémanence de l'image (brûlures). pour les téléviseurs plasma ● Pour réduire le risque de brûlure, cet écran est équipé d'une technologie permettant la modification de pixel. Cette technologie vous permet de définir l'image de façon à ce qu'elle se déplace légèrement vers le haut et vers le bas (ligne verticale) et de gauche à droite (point horizontal). Le mouvement léger et régulier de l'image réduit le risque de brûlure d'écran. Français◀ ▶ Problèmes Solutions et explications La télécommande ne fonctionne pas. ● Vérifiez que la polarité (+/–) des piles de la télécommande est respectée. ● Nettoyez la lentille de la télécommande. ● Essayez de diriger directement la télécommande vers le téléviseur à une distance de 1,5 à 1,8 m. La télécommande du décodeur câble /boîtier décodeur ne permet pas d'allumer ou d'éteindre le téléviseur, ni de régler le volume. ● Programmez la télécommande du décodeur câble/boîtier décodeur de telle sorte qu'elle puisse commander le téléviseur. Consultez le mode d'emploi du décodeur câble/boîtier décodeur pour obtenir le code du téléviseur SAMSUNG. Le message "Mode non pris en charge" est affiché. ● Vérifiez la résolution prise en charge par le téléviseur et réglez la résolution de sortie du périphérique externe en conséquence. Français◀ ▶ Problèmes Solutions et explications Une odeur de plastique se dégage du téléviseur. ● Cette odeur est normale et s'atténuera avec le temps. L'option Informations de signal du téléviseur n'est pas disponible dans le menu de test du Diagnost. auto.. ● Cette fonction n'est disponible qu'avec des chaînes numériques diffusées sur une connexion d'antenne / RF/coaxiale. Le téléviseur penche sur le côté. ● Retirez le support de base du téléviseur et réassemblez-le. Le montage du support de base s'effectue difficilement. ● Veillez à placer le téléviseur sur une surface plane. Si vous ne parvenez pas à retirer les vis du téléviseur, utilisez un tournevis aimanté. Français◀ ▶ Problèmes Solutions et explications Le menu des Canal est grisé (indisponible). ● Le menu Canal n'est disponible que si la source TV est sélectionnée. Vos paramètres sont perdus après 30 minutes ou à chaque mise hors tension du téléviseur. ● Si le téléviseur est en mode Util.magasin, les paramètres audio et vidéo sont réinitialisés toutes les 30 minutes. Remplacez le mode Util.magasin par le mode Util. domicile dans la procédure Configuration (configuration initiale). Appuyez sur le bouton SOURCE pour sélectionner le mode TV et accédez à MENU → Système → Configuration (configuration initiale) → ENTERE. Perte intermittente du signal audio ou vidéo. ● Vérifiez le raccordement des câbles ; rebranchez-les au besoin. ● Une perte de l'image ou du son peut être provoquée par l'utilisation de câbles trop rigides ou épais. Veillez à ce que les câbles soient suffisamment souples pour une utilisation à long terme. En cas d'installation du téléviseur au mur, nous vous recommandons d'utiliser des câbles avec des connecteurs de 90 degrés. Français◀ ▶ Problèmes Solutions et explications Des petites particules sont visibles lorsque vous observez de près le bord du cadre du téléviseur. ● Elles font partie de la conception du produit et ne constituent pas un défaut. Le menu PIP n'est pas disponible. ● La fonctionnalité PIP n'est disponible que lorsque vous utilisez une source HDMI ou Composant. Le modèle LCD 420 ne prend pas en charge le mode AV, Composant Le téléviseur s'est rallumé 45 minutes après sa mise hors tension. ● Cela est tout à fait normal. Le téléviseur exécute, en effet, la fonction de liaison radio (OTA) pour mettre à niveau le microprogramme téléchargé au cours de son utilisation. Le message "Signal brouillé" ou "Signal faible ou inexistant" s'affiche. ● Si vous utilisez une CARTE CAM (CI/CI+), vérifiez qu'elle est installée dans la fente de l'interface commune. ● Si le problème persiste, retirez la CARTE CAM du téléviseur et réintroduisez-la dans la fente. Français◀ ▶ Problèmes Solutions et explications Problèmes récurrents liés à l'image/au son. ● Vérifiez et modifiez le signal/la source. Il peut y avoir une réaction entre les coussinets en caoutchouc situés sur le support de base et la finition de certains meubles. ● Pour éviter que cela ne se produise, utilisez des coussinets de feutre sur toute surface du téléviseur en contact direct avec un meuble. Le message "Fichier non lisible." s'affiche. ● Cela peut être dû au débit binaire élevé du contenu. La lecture a généralement lieu, mais peut présenter certains problèmes. Français◀ ▶ ❑ License TheaterSound, SRS and symbol are trademarks of SRS Labs, Inc. TheaterSound technology is incorporated under license from SRS Labs, Inc. SRS TheaterSound™ provides the most immersive surround sound experience from the TVs built-in speakers, while maintaining steady volume and delivering rich bass and clear dialog. Fabriqué sous licence de Dolby Laboratories. Dolby et le symbole double-D sont des marques déposées de Dolby Laboratories. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. Uniquement pour la série LCD 420 Français◀ The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. DivX Certified® to play DivX® video up to HD 1080p, including premium content. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. Avis concernant les Licences libres En cas d’utilisation d’un logiciel libre (Open Source), les licences correspondantes sont disponibles dans le menu du produit. L’avis concernant les Licences libres est uniquement disponible en anglais. Français E-MANUAL Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model __________ Serial No.____________Contents Channel Setting • Using the INFO button (Now & Next guide) 1 • Using Channel menu 2 • Retuning Channels 17 Basic Features • Changing the Preset Picture Mode 27 • Adjusting Picture Settings 28 • Changing the Picture Options 38 • Changing the Preset Sound Mode 45 • Adjusting Sound Settings 46 • Selecting the Sound Mode 56 Preference Features • Connecting to the Network 57 • Setting the Wired Network 71 • Setting the Wireless Network 77 • Managing the Network Connected Devices 86 • Executing initial setup 90 • Setting the Time 91 • Using the Sleep Timer 93 • Setting the On / Off Timer 94 • Locking Programme 98 • Picture In Picture (PIP) 100 • Economical Solutions 102 • Other Features 105 • Support Menu 116 Advanced Features • Using the 3D function 124 • Using the Media Contents 135 • Connecting a USB Device 136 • Connecting to the PC through network 142 • Screen Display 145 • Media Contents - Additional Functions 156 • Using the DLNA Functions 160 Other Information • Teletext Feature 166 • Anti-theft Kensington Lock 170 • Connections Common Interface Slot 172 • Troubleshooting 174 • Licence 191▶ English ❑ Using the INFO button (Now & Next guide) The display identifies the current channel and the status of certain audio-video settings. The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time. N When you press the a (Information) button, you can see the details of the programme. ● Scroll ◄, ► to view information for a desired programme while watching the current channel. ● Scroll ▲, ▼ to view information for other channels. If you want to move to the currently selected channel, press the ENTERE button. Channel Setting◀ ▶ ❑ Using Channel menu O MENUm → Support → Contents Home → ENTERE Press the CONTENT button to select the desired menu. Each screen will be displayed. ■ Channel List You can view channel information, All, TV, Radio, Data/Other, Analogue or Favourites 1-5. N When you press the CH LIST button on the remote control, Channel List screen will be displayed at once. Channel List Guide AllShare Play Schedule Manager Source Contents Home R Return * The displayed image may differ depending on the model. English◀ ▶ ● All: Shows all currently available channels. ● TV: Shows all currently available TV channels. ● Radio: Shows all currently radio channels. ● Data/Other: Shows all currently available MHP or other channels. ● Analogue: Shows all currently available analogue channels. ● Favourites 1-5: Shows all favourite channels. N If you want to view favourite channels you added, press the CH LIST button and use L (Ch. Mode) button to move Favourites 1-5. English◀ ▶ N Using the control buttons with the Channel List. ● T (Tools): Displays the option menu. ● L (Ch. Mode / Channel): Move to the All, TV, Radio, Data/Other, Analogue or Favourites 1-5. N When you select the Programme View in T (Tools) menu, you can move to other channels using L (Channel) button. ● E (Watch / Information): Watches the channel you selected. / Displays details of the selected programme. ● k (Page): Move to next or previous page. English◀ ▶ How to use Schedule Viewing in Channel List (digital channels only) When you set the Schedule Viewing in Channel List, you can only set the programme in Programme View. 1. Press the CH LIST button, then select a desired digital channel. 2. Press TOOLS button, and then select the Programme View. The programme list for that channel appears. 3. Press the ▲ / ▼ buttons to select the desired programme, then press the ENTERE (Information) or INFO button. 4. Select Schedule Viewing, then press the ENTERE button when done. N If you want to cancel Schedule Viewing, follow steps 1 through 3. Select Cancel schedule. English◀ ▶ Set each channel using the Using Option Menu tChannel List menu options (Programme View, Edit Favourites, Lock/Unlock, Edit Channel Name, Edit Channel Number, Delete, Information, Sort, Edit Mode). Option menu items may differ depending on the channel status. 1. Select a channel and press the TOOLS button. 2. Select a function and change its settings. English◀ ▶ ● Programme View: Displays the programme when digital channel is selected. ● Edit Favourites: Set channels you watch frequently as favourites. Add or delete the selected channel in Favourites 1-5. 1. Select the Edit Favourites, then press the ENTERE button. 2. Press the ENTERE button to select Favourites 1-5, then press the OK button. N One favourite channel can be added in several of favourites among Favourites 1-5. English◀ ▶ ● Lock/Unlock: Lock a channel so that the channel cannot be selected and viewed. N This function is available only when the Channel Lock is set to On. N The PIN input screen appears. Enter your 4-digit PIN. Change the PIN using the Change PIN option. ● Edit Channel Name (analogue channels only): Assign your own channel name. English◀ ▶ ● Edit Channel Number: Edit the number by pressing the number buttons desired. N Some area may not be able to support Edit Channel Name and Edit Channel Number function. ● Delete: You can delete a channel to display the channels you want. ● Information: Displays details of the selected programme. ● Sort: Changes the list ordered by channel number or channel name. English◀ ▶ ● Edit Mode: You can select desired channels and edit it. Using Option Menu t Set each channel using the menu options (Edit Favourites, Lock/Unlock, Delete, Deselect, Select All). 1. Press the TOOLS button in Channel List screen, then select the Edit Mode. A check box appears to the left of the channel. 2. Press the ▲/▼ buttons to select the desired channel, then press the ENTERE button. The (c) mark indicates the channel you’ve selected. N You can select more than one channel. N Press the ENTERE again to deselect the channel. 3. Press the TOOLS button, then select a function and change its settings. English◀ ▶ ● Edit Favourites: Set the selected channels you watch frequently as favourites. N The Edit Favourites screen has five groups (Favourites 1, Favourites 2, etc.). You can add a favourite channel to any one of the groups. Press the ▲/▼ buttons to select a group. ● Lock/Unlock: Lock a channel so that the channel cannot be selected and viewed. N This function is available only when the Channel Lock is set to On. N The PIN input screen appears. Enter your 4-digit PIN. Change the PIN using the Change PIN option. ● Delete: You can delete a channel to display the channels you want. ● Deselect: Deselect the selected channels. ● Select All: Select all the channels in the channel list. English◀ ▶ ■ Guide The EPG (Electronic Programme Guide) information is provided by broadcasters. Using programme schedules provided by broadcasters, you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time. Programme entries may appear blank or out of date depending on a channel status. Die Musik-Show DTV Air 825 NDR FERNSEHEN 19:15 - 20:40 Dani is devastated when scot makes clear his views ... 825 NDR FERNSEHEN 18:15 Sat 1 May Channel View - All Today ▲ 821 Kanal 5 822 M6 823 MDR FERNSEHEN 824 Mediashopping 825 NDR FERNSEHEN ▼ 826 NT1 20:00 20:30 21:00 21:30 No Information No Information No Information Musik fur Sie MD... Ein Schloss am ... No Information a Sche. Mgr b -24 Hours { +24 Hours } Ch. Mode `Information k Page E Schedule 1 2 3 4 5 6 7 Guide Die Musik-Show Die NDR Quizshow Sportclub live * The displayed image may differ depending on the model. English◀ ▶ 1 a Red (Sche. Mgr): Moves to the reserved programmes in Sche. Mgr. 2 b Green (-24 Hours): Viewing the list of programmes to be broadcasted before 24 hours. 3 { Yellow (+24 Hours): Viewing the list of programmes to be broadcasted after 24 hours. 4 } Blue (Ch. Mode): Select the type of channels you want to display on the Channel List window. (All, TV, Radio, Data/Other, Favourites 1-5) English◀ ▶ 5 `(Information): Displays details of the selected programme. 6 k (Page): Move to previous or next page. 7 E (Watch / Schedule) ● When selecting the current programme, you can watch the selected programme. ● When selecting the future programme, you can reserve to watch the selected programme. To cancel the schedule, press the ENTERE button again and select Cancel schedule. English◀ ▶ ■ Schedule Manager You can set a desired channel to be displayed automatically at the intended time. In addition, you can view, modify or delete a channel you have reserved to watch. Set the current time first to use this function. Set each channel using the menu options ( Using Option Menu t Cancel schedule, Edit Schedule, Schedule manually, View Guide). 1. Press the TOOLS button to select the Schedule manually. N You can press the a (Schedule manually) directly on the Schedule Manager screen. 2. Press the ◄/►/▲/▼ or number buttons to set the Antenna, Channel, Repeat, Date, Start Time. ● Antenna: Select the desired broadcasting signal. ● Channel: Select the desired channel. English◀ ▶ ● Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at your convenience. If you select Manual, you can set the day you want. N The (c) mark indicates the day you’ve selected. ● Date: You can set the desired date. N It is available when you select Once in Repeat. ● Start Time: You can set the start time you want. N If you want to edit or cancel the schedule, select the reserved schedule on the Reserved Programmes. Press the TOOLS button, then select the Edit Schedule or Cancel schedule. N If you select the View Guide, you can see the Guide screen. English◀ ▶ ❑ Retuning Channels ■ O Aerial (Air / Cable) MENUm → Channel t→ Aerial → ENTERE Before your television can begin memorising the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or Cable system). English◀ ▶ ■ Country (depending on the country) O MENUm → Channel → Country → ENTERE The PIN input screen appears. Enter your 4 digit PIN number. ● Digital Channel: Change the country for digital channels. ● Analogue Channel: Change the country for analogue channels. English◀ ▶ ■ Auto Tuning (depending on the country) O MENUm → Channel → Auto Tuning → ENTERE Scans for a channel automatically and stores in the TV. N Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked, the PIN input window appears. ● Auto Tuning Air / Cable: Select the aerial source to memorise. Digital & Analogue / Digital / Analogue: Select the channel source to memorise. English◀ ▶ When Aerial Source is set to Air or Cable: When selecting Cable → Digital & Analogue or Digital: Provide a value to scan for cable channels. – Operator Selection (depending on the country): Selects a provider of cable services. – Search Mode (Full / Network / Quick): Scans for all channels with active broadcast stations and stores them in the TV. N If you select Quick, you can set up the Network, Network ID, Frequency, Modulation and Symbol Rate manually by pressing the button on the remote control. – Network (Auto / Manual): Selects the Network ID setting mode among Auto or Manual. – Network ID: When Network is Manual, you can set up Network ID using the numeric buttons. English◀ ▶ – Frequency: Displays the frequency for the channel. (differs in each country) – Modulation: Displays available modulation values. – Symbol Rate: Displays available symbol rates. ● Cable Search Option (depending on the country & cable channels only) Sets additional search options such as the frequency and symbol rate for a cable network search. Start Frequency / Stop Frequency: Set the start or stop frequency (differs in each country). Symbol Rate: Displays available symbol rates. Modulation: Displays available modulation values. English◀ ▶ ■ Manual Tuning O MENUm → Channel → Manual Tuning → ENTERE Scans for a channel manually and stores in the TV. N If a channel is locked, the PIN input window appears. N According to the channel source, Manual Tuning may be supported. When Aerial Source is set to Air or Cable: ● Digital Channel Tuning: Scans for a digital channel manually and stores in the TV. Press the New button to search the digital channels. When scanning has finished, a channel is updated in the channel list. – When selecting Aerial → Air: Channel, Frequency, Bandwidth – When selecting Aerial → Cable: Frequency, Modulation, Symbol Rate English◀ ▶ ● Analogue Channel Tuning: Scans for an analogue channel. Press the New button to search the channels by adjusting the Programme, Colour System, Sound System, Channel, Search. N Channel mode – P (programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to the position numbers from P0 to P99. You can select a channel by entering the position number in this mode. – C (aerial channel mode) / S (cable channel mode): These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel. English◀ ▶ ■ Transfer Channel List (depending on the country) O MENUm → Channel → Transfer Channel List → ENTERE Imports or exports the channel map. You should connect a USB storage to use this function. N The PIN number input screen appears. Enter your 4 digit PIN number. ● Import from USB: Import channel list from USB. ● Export to USB: Export channel list to USB. English◀ ▶ ■ Fine Tune (analogue channels only) O MENUm → Channel → Fine Tune → ENTERE If the signal is weak or distorted, fine tune the channel manually. N Fine tuned channels are marked with an asterisk “*”. N To reset the fine-tuning, select Reset. English◀ ▶ ■ Edit Channel Number (Disable / Enable) (depending on the country) O MENUm → Channel → Edit Channel Number → ENTERE Use this to change channel number. When channel number is changed, channel information is not updated automatically. English◀ ▶ ❑ Changing the Preset Picture Mode O MENUm → Picture → Picture Mode → ENTERE ■ Select your preferred picture type. Picture Mode t N When connecting a PC, you can only make changes to the Entertain and Standard. ● Dynamic: Suitable for a bright room. ● Standard: Suitable for a normal environment. ● Natural for LED 5 series 32" and above : Suitable for reducing eye strain. ● Movie: Suitable for watching movies in a dark room. ● Entertain: Suitable for watching movies and games. N It is only available when connecting a PC. Basic Features English◀ ▶ ❑ Adjusting Picture Settings ■ Samsung MagicAngle for LED 4 series 19", 5 series 22" O MENUm → Picture → Samsung MagicAngle → ENTERE Adjust screen viewing Angle to optimize screen quality according to your viewing position. ● Samsung MagicAngle: When viewing the screen at an angle from below or above by setting the appropriate mode for each position, you can obtain a similar picture quality as viewing the screen directly from the front. Off: Select when viewing from the front position. Lean Back Mode: Select when viewing from a slightly lower position. Standing Mode: Select when viewing from the upper position. ● Mode: Adjust screen viewing angle. N When Samsung MagicAngle is set to Lean Back Mode or Standing Mode, Gamma is not available. English◀ ▶ ■ Backlight for LED, LCD TV / Cell Light for PDP TV / Contrast / Brightness / Sharpness / Colour / Tint (G/R) Your television has several setting options for picture quality control. N NOTE ● In analogue TV, Ext., AV modes of the PAL system, the Tint (G/R) function is not available. LCD 420 does not support AV, Component mode ● When connecting a PC, you can only make changes to Backlight for LED, LCD TV / Cell Light for PDP TV , Contrast, Brightness and Sharpness. ● Settings can be adjusted and stored for each external device connected to the TV. ● Lowering picture brightness reduces power consumption. English◀ ▶ ■ Screen Adjustment O MENUm → Picture → Screen Adjustment → ENTERE Set the various picture options such as picture size and aspect ratio. ● Picture Size: Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time. Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio. 16:9: Sets the picture to 16:9 wide mode. Wide Zoom: Magnifies the picture size more than 4:3. N Adjusts the Position by using ▲, ▼ buttons. English◀ ▶ Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size. N Adjusts the Zoom or Position by using ▲, ▼ button. 4:3: Sets the picture to basic (4:3) mode. N Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention (screen burn) which are not covered by the warranty. Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted. LCD 420 does not support AV, Component mode English◀ ▶ Smart View 1 for LED 5 series 32" and above : Reduces original screen by 50%. Smart View 2 for LED 5 series 32" and above : Reduces original screen by 25%. N NOTE ● Smart View 1 is enabled only in HDMI mode. ● Smart View 2 is enabled only in DTV and HDMI modes. ● The picture size can vary depending on the input resolution when content is played using Videos under Media Play. ● Position: Adjust the picture position. It is only available in Screen Fit or Wide Zoom. English◀ ▶ ● Zoom/Position: Adjust the picture size and position. It is only available in Zoom. N NOTE ● After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode, you may need to centre the picture LCD 420 does not support AV, Component mode : 1. Press the ▲ or ▼ button to select Position. 2. Press the ENTERE button. 3. Press the ▲, ▼, ◄ or ► button to move the picture. ● Depending on the input source, the picture size options may vary. ● If you want to reset the position you adjusted, select Reset in the Position screen. The picture will be set to its default position. English◀ ▶ ● The available items may differ depending on the selected mode. ● When connecting a PC, only 16:9 and 4:3 modes can be adjusted. ● Settings can be adjusted and stored for each external device connected to an input on the TV. ● If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function. ● 4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size. English◀ ▶ ● PC Screen Adjustment for LED 4 series 19", 5 series 22" N It is available in PC mode. Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned to the centre of screen. Position: Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjust the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position. Image Reset: Resets the image to default settings. English◀ ▶ ■ Auto Adjustmentt for LED 4 series 19", 5 series 22" O MENUm → Picture → Auto Adjustment → ENTERE Adjust frequency values/positions and fine tune the settings automatically. N It is available in PC mode. N Not available when connecting with an HDMI/DVI cable. Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows OS) Depending on the version of Windows and the video card, the actual screens on your PC may differ in which case the same basic set-up information will almost always be applied. (If not, contact your computer manufacturer or Samsung Dealer.) English◀ ▶ To set screen resolution, click on the “Control Panel” on the Windows start menu, and then set the desired screen resolution in the “Display”. N NOTE ● The correct size setting (Screen resolution) - [Optimum: 1366 X 768 pixels] for LED 4 series - [Optimum: 1920 X 1080 pixels] for LED 5 series ● If a vertical-frequency option exists on your display settings, the correct value is “60” or “60 Hz”. English◀ ▶ ❑ Changing the Picture Options ■ Advanced Settings O MENUm → Picture → Advanced Settings → ENTERE (available in Standard / Movie mode) You can adjust the detailed setting for the screen including colour and contrast. N When connecting a PC, you can only make changes to Gamma and White Balance. for LED 4 series 19", 5 series 22" English◀ ▶ ● Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast. ● Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth. ● Flesh Tone: Adjust the flesh tone colour. Advanced Settings Dynamic Contrast Medium Black Tone Off Flesh Tone 0 RGB Only Mode Off Colour Space Native White Balance Gamma 0 ● RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and Blue colour for making fine adjustments to the hue and saturation. ● Colour Space (Auto / Native): Adjust the range of colours available to create the image. English◀ ▶ ● White Balance: Adjust the colour temperature for a more natural picture. R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) darkness. R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness. Reset: Resets the White Balance to its default settings. ● Gamma: Adjust the primary colour intensity. ● Motion Lighting (Off / On): Reduce power consumption by brightness control adapted motion. N This function is not supported in 3D mode. for PDP 490 series N Only available in Standard mode. N When changing a setting value of Backlight for LED, LCD TV / Cell Light for PDP TV , Brightness or Contrast, Motion Lighting will be set to Off. English◀ ▶ ■ Picture Options O MENUm → Picture → Picture Options → ENTERE N When connecting a PC, you can only make changes to the Colour Tone. ● Colour Tone (Cool / Standard / Warm1 / Warm2) N Warm1 or Warm2 will be deactivated when the picture mode is Dynamic. N Settings can be adjusted and stored for each external device connected to an input on the TV. English◀ ▶ ● Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen. N When the signal is weak, try other options until the best picture is displayed. Auto Visualisation: When changing analogue channels, displays signal strength. N Only available for analogue channels. N When the INFO button is pressed, the signal strength bar is displayed. N When bar is green, you are receiving the best possible signal. English◀ ▶ ● MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality. ● HDMI Black Level (Low / Normal): Selects the black level on the screen to adjust the screen depth. N Available only in HDMI mode (RGB signals). ● Film Mode (Off / Auto1 / Auto2): Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality. N Available in TV mode, AV, Component (480i / 1080i) and HDMI (1080i). LCD 420 does not support AV, Component mode N If the screen does not seem natural, change its option to Off / Auto1 / Auto2 in Film Mode. ● LED Motion Plus (Off / On) for LED 5 series : Removes drag from fast scenes with a lot of movement to provide a clear picture. N It will be deactivated when the picture mode is set to Natural. English◀ ▶ ■ Reset Picture (Yes / No) O MENUm → Picture → Reset Picture → ENTERE Resets your current picture mode to its default settings. English◀ ▶ ❑ Changing the Preset Sound Mode ■ O Sound Mode MENUm → Sound t→ Sound Mode → ENTERE ● Standard: Selects the normal sound mode. ● Music: Emphasizes music over voices. ● Movie: Provides the best sound for movies. ● Clear Voice: Emphasizes voices over other sounds. ● Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired. N If Speaker Select is set to External Speaker, Sound Mode is disabled. for LED, PDP TV English◀ ▶ ❑ Adjusting Sound Settings ■ Sound Effect (standard sound mode only) O MENUm → Sound → Sound Effect → ENTERE Use the up and down arrow keys to select an option, and then press ENTERE. ● (standard sound mode only) SRS TruSurround HD (Off / On) t This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF (Head Related Transfer Function) technology. English◀ ▶ ● SRS TruDialog (Off / On) (standard sound mode only) This function allows you to increase the intensity of a voice over background music or sound effects so that dialogue can be heard more clearly. ● Equaliser Use Equaliser to customize sound setting for each speaker. Balance: Adjusts the balance between the right and left speaker. 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies. Reset: Resets the equaliser to its default settings. N If Speaker Select is set to External Speaker, Sound Effect is disabled. for LED, PDP TV English◀ ▶ ■ Broadcast Audio Options O MENUm → Sound → Broadcast Audio Options → ENTERE ● (digital channels only) Audio Language t Change the default value for audio languages. N The available language may differ depending on the broadcast. ● Audio Format (digital channels only) When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function. N Audio Format option may differ depending on the broadcast. 5.1ch Dolby digital sound is only available when connecting an external speaker through an optical cable. LCD 420 does not support English◀ ▶ ● Audio Description (not available in all locations) (digital channels only) This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster. Audio Description (Off / On): Turn the audio description function on or off. Volume: Adjust the audio description volume. English◀ ▶ ■ Additional Settings O MENUm → Sound → Additional Settings → ENTERE ● DTV Audio Level (MPEG / HE-AAC) (digital channels only): This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level. N According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB. N To increase or decrease the volume, adjust between the range 0 and -10 respectively. English◀ ▶ ● SPDIF Output for LED, PDP TV : SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player. Audio Format: You can select the Digital Audio output (SPDIF) format. The available Digital Audio output (SPDIF) format may differ depending on the input source. N By connecting to 5.1ch speakers in a Dolby Digital setup, maximize your interactive 3D sound experience. Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms). English◀ ▶ ● Dolby Digital Comp (Line / RF): This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound). N Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time. Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB. RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB. English◀ ▶ ■ Speaker Settings O MENUm → Sound → Speaker Settings → ENTERE ● Speaker Select (External Speaker / TV Speaker) for LED, PDP TV A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker. N When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited. N When Speaker Select is set to External Speaker. ● TV Speaker: Off, External Speaker: On N When Speaker Select is set to TV Speaker. ● TV Speaker: On, External Speaker: On N If there is no video signal, both speakers will be mute. English◀ ▶ ● Auto Volume (Off / Normal / Night) To equalize the volume level on each channel, set to Normal. Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night. N To use the volume control on the source device connected to the TV, set Auto Volume to Off on the TV. Otherwise, a change to the volume control of the source device may not be applied. English◀ ▶ ■ Reset Sound (Yes / No) O MENUm → Sound → Reset Sound → ENTERE Reset all sound settings to the factory defaults. English◀ ▶ ❑ Selecting the Sound Mode When you set to Dual I-II, the current sound mode is displayed on the screen. t Audio Type Dual I-II Default A2 Stereo Mono Mono Automatic change Stereo Stereo ↔ Mono Dual Dual I ↔ Dual II Dual I NICAM Stereo Mono Mono Automatic change Stereo Mono ↔ Stereo Dual Mono → Dual I  Dual II  Dual I N If the stereo signal is weak and an automatic switching, occurs, then switch to the mono. N Only activated in stereo sound signal. N Only available when the Source is set to TV. English◀ ▶ Preference Features ❑ Connecting to the Network for LED 5 series 32" and above, PDP 490 series N For LED TVs, network function is not supported depending on the country. ■ Wired Network Connection You can attach your TV to your LAN using cable in three ways: English◀ ▶ ● You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a LAN cable. See the diagram below. * It may differ depending on the model. The Modem Port on the Wall External Modem (ADSL / VDSL / Cable TV) TV Rear Panel Modem Cable LAN Cable English◀ ▶ ● You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem. Use LAN cable for the connection. See the diagram below. * It may differ depending on the model. The Modem Port on the Wall External Modem (ADSL / VDSL / Cable TV) IP Sharer (having DHCP server) TV Rear Panel Modem Cable LAN Cable LAN Cable English◀ ▶ ● Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a LAN cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house. * It may differ depending on the The LAN Port on the Wall model. TV Rear Panel LAN Cable ● If your network requires a Dynamic IP address, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). English◀ ▶ Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you do not have to enter them manually. Most home networks use a Dynamic IP address. Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows computer, you can also get these values through your computer. N You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that support DHCP also let you use Static IP addresses. N It is not supported when the network speed is below or equal to 10Mbps. English◀ ▶ ■ Wireless Network Connection To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN Adapter (WIS12ABGNX, WIS09ABGNX), which you connect to your TV’s back or side panel USB port. See the illustration below. LAN Cable Wireless IP sharer (Wireless router having DHCP Server) Samsung Wireless LAN Adapter TV Side Panel The LAN Port on the Wall English◀ ▶ Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers and Ecommerce sites. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video may not be played smoothly. N NOTE ● You must use the “Samsung Wireless LAN Adapter” (WIS12ABGNX, WIS09ABGNX) to use a wireless network. ● Samsung Wireless LAN Adapter and the USB extension Cable are sold separately and are offered by select retailers and Ecommerce sites. English◀ ▶ ● To use a wireless network, your TV must be connected to a wireless IP sharer (either a router or a modem). If the wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. ● Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communication failure. ● If you apply a security system other than the systems listed below, it will not work with the TV. English◀ ▶ ● If HIGH PURE THROUGHPUT (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP or TKIP for your wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications. ● If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode. ● If your router, modem, or device is not certified, it may not connect to the TV via the “Samsung Wireless LAN Adapter”. ● Ensure the TV is turned off before you connect the Samsung Wireless LAN Adapter. English◀ ▶ ● Connection Methods: You can setup the wireless network connection like below. – Auto Setup (Using the Auto Network Search function) – Manual Setup – WPS(PBC) – Wi-Fi Direct ● The Samsung Wireless LAN Adapter may not be recognized when using a connection via a USB hub or via a USB extension cable other than the cable supplied. English◀ ▶ Notice The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter. In such a case, establish a connection using one of the following methods or connect the Samsung Wireless LAN Adapter using a USB cable in a place that is not affected by radio interference. Method 1 Connect using the USB right angle adapter. To connect the Samsung Wireless LAN Adapter using the USB right angle adapter, follow these steps: 1. Connect the USB right angle adapter to the Samsung Wireless LAN Adapter. 2. Connect the other end of the right angle adapter to the USB port. * The position of port may differ depending on the model. English◀ ▶ Method 2 Connect via an extension cable To reconnect the Samsung Wireless LAN Adapter using the extension cable, follow these steps: 1. Connect the extension cable to the USB port. 2. Connect the extension cable and Samsung Wireless LAN Adapter. 3. Attach the Samsung Wireless LAN Adapter to the back of the TV near the top, using doublesided adhesive tape. N The Samsung Wireless LAN Adapter should be installed in an interference-free area in order to avoid interference between the adapter and tuner. or * The position of port may differ depending on the model. English◀ ▶ ■ Network Settings O MENUm → Network → Network Settings → ENTERE You can set the wired or wireless network connection. N For detailed settings for wired network, refer to the "Setting the Wired Network", and for detailed settings for wireless network, refer to the "Setting the Wireless Network" in this manual. English◀ ▶ ■ Network Status O MENUm → Network → Network Status → ENTERE You can check the current network and Internet status. English◀ ▶ ❑ Setting the Wired Network for LED 5 series 32" and above, PDP 490 series N For LED TVs, network function is not supported depending on the country. ■ Wired Network Setup (Auto) N When connecting the LAN Cable, the screen pop-up appears directly to set wired network. Use the Automatic Network Setup when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps: English◀ ▶ How to set up automatically 1. Go to Network Settings screen. 2. Select Start. 3. The network connection screen appears, and network setting is done. Network Settings Network cable connected. Press Start to configure your wired network settings. If you want to connect to your wireless network, plug in a Samsung Wireless LAN Adapter. Start Cancel N If it fails to set automatically, check the connection of LAN port. N If you cannot find network connection values or if you want to set connection manually, set it to Manual. Refer to following “How to set up manually”. English◀ ▶ ■ Wired Network Setup (Manual) Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address. Getting the Network Connection Values To get the Network connection values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. 2. In the pop-up menu that appears, click Status. 3. On the dialogue that appears, click the Support tab. 4. On the Support Tab, click the Details button. The Network connection values are displayed. English◀ ▶ How to set up manually To set up your TV’s cable network connection manually, follow these steps: 1. Follow Steps 1 through 2 in the “How to set up automatically” procedure. 2. Select the IP Settings on network connection screen. 3. Set IP Mode to Manual. 4. Press the ▼ button to go to the first entry field. IP Settings R Return OK IP Mode Manual IP Address 0 . 0 . 0 . 0 Subnet Mask 0 . 0 . 0 . 0 Gateway 0 . 0 . 0 . 0 DNS Mode Manual DNS Server 0 . 0 . 0 . 0 5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons to enter numbers and the arrow buttons to move from one entry field to another. 6. When done, select the OK. 7. The network connection screen appears, and network setting is done. English◀ ▶ The check list for wired network connection failure When wired network connection failed, try to apply the following information to each issue. Issues Solutions and Explanations No network cable found. • Check that your network cable is plugged in. • If it is connected, make sure that the router is turned on; if it is on, try turning it off and on again. IP auto setting failed. Try the following to set your IP address automatically or set your IP address manually by selecting IP Settings. • Ensure DHCP server is enabled on router and unplug and re-plug-in the router. • Contact your Internet Service Provider for more information. English◀ ▶ Issues Solutions and Explanations Unable to connect to the network. • Check if your IP address is set correctly in IP Settings. • Contact your Internet Service Provider for more information. Connected to your local network, but cannot connect to the Internet. • Check your Internet LAN cable is connected correctly to LAN port of router. • Check the DNS settings in IP Settings. • If the problem persists, contact your Internet Service Provider to access the Internet. Network setup complete, but cannot connect to the Internet. • Confirm that your router is connected to the Internet. • If the problem persists, contact your Internet Service Provider to access the Internet. English◀ ▶ ❑ Setting the Wireless Network for LED 5 series 32" and above, PDP 490 series N For LED TVs, network function is not supported depending on the country. ■ Wireless Network Setup (Auto) Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up wireless security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the setup process. N When connecting Samsung Wireless LAN Adapter, the screen pop-up appears directly to set wireless network. English◀ ▶ How to set up automatically 1. Go to Network Settings screen. 2. Select Start. 3. The Network function searches for available wireless networks. When done, it displays a list of the available networks. Network Settings Samsung Wireless LAN Adapter connected. Press Start to configure your wireless network settings. If you want to connect to your wired network, plug in a network cable. Start Cancel 4. In the list of networks, press the ▲ or ▼ button to select a network, and then press ENTERE button. N If the wireless router is set to Hidden (Invisible), you have to select Add Network and enter the correct network name and Security key to establish the connection. English◀ ▶ 5. If the Security screen pop-up appears, go to step 6. If you select the wireless router which does not have wireless security, go to step 7. 6. To set wireless security for the router, enter the Security key(Security or PIN). N When you enter the Security key (Security or PIN), use ▲/▼/◄ /► buttons to select number/characters. Press ENTERE to enter the characters. N You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem. 7. The network connection screen appears, and network setting is done. N If it fails to set Security key (Security or PIN), select Retry or IP Settings. N If you want to set connection manually, select the IP Settings. Refer to following “How to set up manually”. English◀ ▶ ■ Wireless Network Setup (Manual) Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address. Getting the Network Connection Values To get the Network connection values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. 2. In the pop-up menu that appears, click Status. 3. On the dialogue that appears, click the Support tab. 4. On the Support Tab, click the Details button. The Network connection values are displayed. English◀ ▶ How to set up manually To set up your TV’s cable network connection manually, follow these steps: 1. Follow Steps 1 through 7 in the “How to set up automatically” procedure. 2. Select the IP Settings on network connection screen. 3. Set IP Mode to Manual. 4. Press the ▼ button to go to the first entry field. 5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons to enter numbers and the arrow buttons to move from one entry field to another. 6. When done, select the OK. 7. The network connection screen appears, and network setting is done. English◀ ▶ ■ Wireless Network Setup (WPS(PBC)) If your router has a WPS(PBC) button, follow these steps: 1. Go to Network Settings screen. 2. Select Start. 3. The Network function searches for available wireless networks. When done, it displays a list of the available networks. 4. Select the WPS(PBC). 5. Press the WPS(PBC) button on your router within 2 minutes. Your TV automatically acquires all the network setting values it needs and connects to your network. 6. The network connection screen appears, and network setting is done. English◀ ▶ The check list for wireless network connection failure When wireless network connection failed, try to apply the following information to each issue. Issues Solutions and Explanations Wireless network connection failed. • No wireless router selected. Go to Network Settings to select your router. • Samsung Wireless LAN adapter is required to use a wireless network. • Make sure the TV is connected to a wireless IP sharer (Router). IP auto setting failed. • Try the following to set your IP address automatically or set your IP address manually by selecting IP Settings. • Ensure DHCP server is enabled on router and unplug and re-plug-in the router. • Check if you need to enter a security key to use the router. • Contact your Internet Service Provider for more information. English◀ ▶ Issues Solutions and Explanations Unable to connect to wireless router. • Check that the router is turned on, and if it is on, try turning it off and on again. • Check if you need to enter a security key to use the router. Unable to connect to the network. • Check if your IP address is set correctly in IP Settings. • Check if you need to enter a security key to use the router. • Contact your Internet Service Provider for more information. Connected to your local network, but cannot connect to the Internet. • Check your Internet LAN cable is connected correctly to LAN port of router. • Check the DNS settings in IP Settings. • If the problem persists, contact your Internet Service Provider to access the Internet. Network setup complete, but cannot connect to the Internet. • Confirm that your router is connected to the Internet. • If the problem persists, contact your Internet Service Provider to access the Internet. English◀ ▶ If Your TV Fails to Connect to the Internet Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access. As your TV has a different MAC address, your ISP can not authenticate its MAC address, and your TV can not connect. To resolve this problem, ask your ISP about the procedures required to connect devices other than a PC (such as your TV) to the Internet. If your Internet service provider requires an ID or password to connect to the Internet, your TV may not be able to connect to the Internet. If this is the case, you must enter your ID or password when connecting to the Internet. The internet connection may fail because of a firewall problem. If this is the case, contact your Internet service provider. If you cannot connect to the Internet even after you have followed the procedures of your Internet service provider, please contact Samsung Electronics. English◀ ▶ ❑ Managing the Network Connected Devices for PDP 490 series ■ Wi-Fi Direct O MENUm → Network → Wi-Fi Direct → ENTERE Set to connect the TV to wireless mobile devices. Using this function, you can connect wireless mobile devices with your TV directly without a wireless router. N You can use this function when connecting the Samsung Wireless LAN Adapter. N It only supports AllShare Play function. N It may not be supported depending on the mobile device. English◀ ▶ How to connect the device to your TV using Wi-Fi Direct function 1. Go to Wi-Fi Direct screen. The TV starts to search devices. 2. Turn on the Wi-Fi Direct function on your device. Select the desired device, and then press the ENTERE button. ● PBC: Press the WPS(PBC) button on your device within 2 minutes. Your TV automatically acquires all the network setting values it needs and connects to your network. ● PIN: Input the displayed PIN on your device. N If you want to disconnect the device, select the connected device, and press the ENTERE button to select Disconnect. English◀ ▶ ■ AllShare Settings O MENUm → Network → AllShare Settings → ENTERE Set whether to allow a network connected device like a smartphone or tablet to share content or control TV using an application downloaded on your mobile device. For details on set up options, refer to the "Using the DLNA Functions". English◀ ▶ ■ Device Name O MENUm → Network → Device Name → ENTERE Change the TV’s name by keying in a name manually. N A keyboard appears on the screen and you can key in a name for your TV manually using your remote control. For example, if you want to change the name to Samsung TV, press each character using the ▲/▼/◄/► buttons, and then select Done. English◀ ▶ ❑ Executing initial setup ■ Setup O MENUm → System → Setup → ENTERE Configure the channels and the time when setting up the TV for the first time or when resetting the unit. N For the detailed information about setting Setup, refer to “Initial Setup” in User Manual. English◀ ▶ ❑ Setting the Time ■ Time O MENUm → System → Time → ENTERE The current time will appear every time you press the INFO button. ● Clock: Setting the clock is for using various timer features of the TV. N If you disconnect the power cord, you have to set the clock again. Clock Mode: Set up the current time manually or automatically. – Auto: Set the current time automatically using the time from a digital channel. N The aerial must be connected in order to set the time automatically. English◀ ▶ – Manual: Set the current time manually. N Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually. Clock Set: Set the Date and Time. N Available only when Clock Mode is set to Manual. N You can set the Date and Time directly by pressing the number buttons on the remote control. Time Zone (depending on the country): Select your time zone. N This function is only available when the Clock Mode is set to Auto. N When selecting Manual in Time Zone, GMT and DST will be activated. English◀ ▶ ❑ Using the Sleep Timer O MENUm → System → Time → Sleep Timer → ENTERE ● Sleep Timert: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes). N To cancel Sleep Timer, select Off. English◀ ▶ ❑ Setting the On / Off Timer O MENUm → System → Time → On Timer Off Timer → ENTERE ● On Timer 1 / On Timer 2 / On Timer 3: Three different on timer settings can be made. You must set the clock first. – Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select Manual, you can set up the day you want to activate the timer. N The c mark indicates the day you’ve selected. – Time: Set the hour and minute. – Volume: Set the desired volume level. English◀ ▶ – Source: Select TV or USB content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV) – Aerial (when the Source is set to TV): Select ATV or DTV. – Channel (when the Source is set to TV): Select the desired channel. – Music / Photo (when the Source is set to USB): Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically. N NOTE ● If there is no music file on the USB device or the folder containing a music file is not selected, the timer function does not operate correctly. English◀ ▶ ● When there is only one photo file in the USB device, the slide show will not play. ● If a folder name is too long, the folder cannot be selected. ● Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folders assigned to each USB have different names. ● It is recommended that you use a USB memory stick and a multi card reader when using On Timer. ● The On Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by some manufacturers because these devices take a long time to be recognized. English◀ ▶ ● Off Timer 1 / Off Timer 2 / Off Timer 3: Three different off timer settings can be made. You must set the clock first. Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select Manual, you can set up the day you want to activate the timer. N The c mark indicates the day you’ve selected. Time: Set the hour and minute. English◀ ▶ ❑ Locking Programme ■ Security O MENUm → System → Security → ENTERE N The PIN input screen appears before the setup screen. N Enter your 4-digit PIN. Change the PIN using the Change PIN option. ● Channel Lock (Off / On): Lock channels in Channel menu to prevent unauthorized users, such as children, from watching unsuitable programme. N Available only when the Source is set to TV. English◀ ▶ ● Programme Rating Lock (depending on the country): Prevent unauthorized users, such as children, from watching unsuitable programme with a userdefined 4-digit PIN code. If the selected channel is locked, the “\” symbol will be displayed. N The items of Programme Rating Lock differs depending on the country. ● Change PIN: Change your password required to set up the TV. English◀ ▶ ❑ Picture In Picture (PIP) ■ O PIP MENU tm → System → PIP → ENTERE You can watch the TV tuner and one external video source simultaneously. PIP (Picture-in-Picture) does not function in the same mode. N NOTE ● For PIP sound, refer to the Sound Select instructions. ● If you turn the TV off while watching in PIP mode, the PIP window will disappear. ● You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke. English◀ ▶ ● PIP settings LCD 420 does not support AV, Component mode Main picture Sub picture Component, HDMI TV ● PIP (Off / On): Activate or deactivate the PIP function. ● Channel: Select the channel for the sub-screen. ● Size (Õ / Ã): Select a size for the sub-picture. ● Position (à / – / — / œ): Select a position for the sub-picture. ● Sound Select (Main / Sub): You can choose the desired sound (Main / Sub) in PIP mode. English◀ ▶ ❑ Economical Solutions ■ Eco Solution O MENUm → System → Eco Solution → ENTERE ● Energy Saving (Off / Low / Medium / High / Picture Off)t: This adjusts the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen. English◀ ▶ ● Eco Sensor (Off / On) for LED 5 series 32" and above, PDP TV : To enhance your power savings; the picture settings will automatically adapt to the light in the room. N If you adjust the Backlight for LED, LCD TV / Cell Light for PDP TV , the Eco Sensor will be set to Off. Min. Backlight for LED, LCD TV / Min Cell Light for PDP TV : When Eco Sensor is On, the minimum screen brightness can be adjusted manually. N If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the surrounding light intensity. English◀ ▶ ● No Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid unnecessary energy consumption, set how long you want the TV to remain on if it’s not receiving a signal. N Disabled when the PC is in power saving mode. ● Auto Power Off (Off / On): The TV will be automatically turned off when no user operation is received for 4 hours. English◀ ▶ ❑ Other Features ■ Language O MENUm → System → Language → ENTERE ● Menu Language: Set the menu language. ● Teletext Language (depending on the country): Set a desired language for teletext. N English is the default in cases where the selected language is unavailable in the broadcast. ● Preferred Language (Primary Audio / Secondary Audio / Primary Subtitle / Secondary Subtitle / Primary Teletext / Secondary Teletext): Select a language, which will be the default language when a channel is selected. N Primary Teletext and Secondary Teletext may not be supported in some locations. English◀ ▶ ■ Subtitle O MENUm → System → Subtitle → ENTERE Use this menu to set the Subtitle mode. ● Subtitle (Off / On): Switches subtitles on or off. ● Subtitle Mode (Normal / Hearing Impaired): Sets the subtitle mode. ● Subtitle Language: Sets the subtitle language. N If the programme you are watching does not support the Hearing Impaired function, Normal automatically activates even if the Hearing Impaired mode is selected. N English is the default in cases where the selected language is unavailable in the broadcast. English◀ ▶ ■ Digital Text (Disable / Enable) (UK only) O MENUm → System → Digital Text → ENTERE If the programme broadcasts with digital text, this feature is enabled. N MHEG (Multimedia and Hypermedia Information Coding Experts Group) An International standard for data encoding systems used in multimedia and hypermedia. This is at a higher level than the MPEG system which includesdata-linking hypermedia such as still images, character service, animation, graphic and video files as well as multimedia data. MHEG is user runtime interaction technology and is being applied to various fields including VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), teleeducation, tele-conferencing, digital libraries and network games. English◀ ▶ ■ Auto Protection Time for LCD, LED TV O MENUm → System → Auto Protection Time → ENTERE ● Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 hours): If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen. English◀ ▶ ■ Screen Burn Protection for PDP TV O MENUm → System → Screen Burn Protection → ENTERE To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. The Time setting allows you to programme the time between movement of the picture in minutes. ● Pixel Shift (Off / On): Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to minimize after image on the screen. N Optimum condition for pixel shift Item TV / HDMI Horizontal 0~4 4 Vertical 0~4 4 Time (minute) 1~4 min 4 min English◀ ▶ N The Pixel Shift value may differ depending on the monitor size (inches) and mode. N This function is not available in the Screen Fit mode. ● Auto Protection Time (Off / 10 min / 20 min / 40 min / 1 hour): If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen. ● Scrolling: This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after images or symbols on the screen, especially when you displayed a still image on the screen for a long time. English◀ ▶ N The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after-images on the screen. If the after-image is not removed after performing the function, repeat the function again. N Press any key on the remote control to cancel this feature. ● Side Grey (Light / Dark): When you watch TV with the screen ratio set to 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides. English◀ ▶ ■ General O MENUm → System → General → ENTERE ● Game Mode (Off / On): When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode. N NOTE ● Precautions and limitations for game mode – To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu. – If you display the TV menu in Game Mode, the screen shakes slightly. English◀ ▶ ● Game Mode is not available in TV mode. ● After connecting the game console, set Game Mode to On. Unfortunately, you may notice reduced picture quality. ● If Game Mode is On: – Picture Mode is set to Standard and Sound Mode is set to Movie. ● Panel Lock (Off / On): Lock or unlock all the keys on the panel. ● Boot Logo (Off / On): Display Samsung logo when the TV is turned on. English◀ ▶ ■ DivX® Video On Demand O MENUm → System → DivX® Video On Demand → ENTERE Shows the registration code authorized for the TV. If you connect to the DivX web site and register with 10-digit registration code, you can download the VOD activation file. Once you play it using Videos, the registration is completed. N For more information on DivX® VOD, visit http://vod.divx.com. English◀ ▶ ■ Common Interface O MENUm → System → Common Interface → ENTERE ● CI Menu: This enables the user to select from the CAM-provided menu. Select the CI Menu based on the menu PC Card. ● Application Info: View information on the CAM inserted into the CI slot and on the “CI or CI+ CARD” which is inserted into the CAM. You can install the CAM anytime whether the TV is on or off. 1. Purchase a CI CAM module at your nearest dealer or by phone. 2. Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the arrow. 3. Insert the CAM with the “CI or CI+ CARD” into the common interface slot, in the direction of the arrow so that it aligns parallel with the slot. 4. Check if you can see a picture on a scrambled signal channel. English◀ ▶ ❑ Support Menu ■ e-Manual O MENUm → Support → e-Manual → ENTERE You can read the introduction and instructions about the TV features stored in your TV. N For the detailed information about e-Manual Screen, refer to “How to use the e-Manual” in User Manual. English◀ ▶ ■ Self Diagnosis O MENUm → Support → Self Diagnosis → ENTERE N Self Diagnosis might take few seconds, this is part of the normal operation of the TV. ● Picture Test (Yes / No): Use to check for picture problems. ● Sound Test (Yes / No): Use the built-in melody sound to check for sound problems. N If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV Speaker in the Sound menu. for LED, PDP TV N The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button. for LED, PDP TV English◀ ▶ ● Signal Information: (digital channels only) HDTV channel’s reception quality is either perfect or the channels are unavailable. Adjust your aerial to increase signal strength. ● Reset: Reset all settings to the factory defaults except network settings. N The PIN input screen appears before the setup screen. N Enter your 4-digit PIN. Change the PIN using the Change PIN option. ● Troubleshooting: If the TV seems to have a problem, refer to this description. N If none of these troubleshooting tips apply, contact the Samsung customer service centre. English◀ ▶ ■ Software Upgrade O MENUm → Support → Software Upgrade → ENTERE Software Upgrade can be performed by downloading the latest firmware from “www.samsung.com” to a USB memory device. Current Version-the software already installed in the TV. Installing the Latest Version ● By USB: Insert a USB drive containing the firmware upgrade file, downloaded from “www.samsung.com” into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can easily reset them after the upgrade. English◀ ▶ ● By Online for PDP 490 series : Upgrade the software using the Internet. N First, configure your network. For detailed procedures on using the Network Setup, refer to the “Network Settings” instructions. N If the internet connection doesn’t operate properly, the connection may be broken. Please retry downloading. If the problem persists, download by USB and upgrade. English◀ ▶ ● By Channel: Upgrade the software using the broadcasting signal. N If the function is selected during the software transmission period, software will be automatically searched and downloaded. N The time required to download the software is determined by the signal status. ● Alternative Software: Replace the current software with the alternative. ● Standby Mode Upgrade (Off / 1 hour later / 2 hours later / 00:00 / 02:00 / 12:00 / 14:00): A manual upgrade will be automatically performed at selected time. Since the power of the unit is turned on internally, the screen may be turned on slightly for the product. This phenomenon may continue for more than 1 hour until the software upgrade is complete. English◀ ▶ ■ Contact Samsung O MENUm → Support → Contact Samsung → ENTERE View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centres, and how to download products and software. English◀ ▶ ■ Contents Home O MENUm → Support → Contents Home → ENTERE You can enjoy useful and various contents. English◀ ▶ Advanced Features ❑ Using the 3D function for PDP 490 series ■ 3D O MENUm → Picture → 3D → ENTERE This exciting new feature enables you to view 3D content. To fully enjoy this feature, you must purchase a pair of Samsung 3D Active Glasses to view 3D video. Samsung 3D Active Glasses are sold separately. For more detailed purchasing information, contact the retailer where you purchased this TV. N "Full HD 3D Glasses™" Logo indicates compatibility between display products and 3D Glasses which are compliant with the "Full HD 3D Glasses™" format, and does not indicate picture quality of display products. English◀ ▶ Viewing TV using the 3D function IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the TV’s 3D function. [WARNING ● Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea and headaches. If you experience any such symptom, stop viewing 3D TV, remove 3D Active Glasses and rest. ● Watching 3D images for an extended period of time may cause eye strain. If you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses and rest. English◀ ▶ ● A responsible adult should frequently check on children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest. ● Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.) ● Do not use the 3D function or 3D Active Glasses while walking or moving around. Using the 3D function or 3D Active Glasses while moving around may result in injuries due to running into objects, tripping, and/or falling. English◀ ▶ ● 3D Mode: Select the 3D input format. N If you want to feel the 3D effect fully, please wear the 3D Active Glasses first, and then select 3D Mode from the list below that provides the best 3D viewing experience. N When watching 3D images, turn on 3D Active Glasses. 3D Mode Operation Off Turns the 3D function off. 2D → 3D Changes a 2D image to 3D. Side by Side Displays two images next to each other. Top & Bottom Displays one image above another. English◀ ▶ N Some file format may not be supported the "2D → 3D". N When you watch 3D images under flickering lighting such as a fluorescent lamp (50Hz ~ 60Hz ) or a 3 wavelength lamp, you may notice some screen flickering. If this occurs, dim or turn off the light. ● 3D Perspective (-5 ~ +5): Adjust overall 3D perspective of on-screen image. ● Depth (1~10): Adjust overall depth. ● L/R Change (L/R Image / R/L Image): Swap the left and right pictures. English◀ ▶ Support resolution (16:9 only) ● HDMI Source Resolution Frequency (Hz) / 1280 x 720p 50 / 59.94 / 60 Hz 1920 x 1080i 50 / 59.94 / 60 Hz 1920 x 1080p 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60 Hz Frame Packing 1280 x 720p 50 / 59.94 / 60 Hz 1920 x 1080i 50 / 59.94 / 60 Hz 1920 x 1080p 23.98 / 24 / 25 / 29.97 / 30 Hz English◀ ▶ ● Components & DTV Source Resolution Frequency (Hz) Components 1280 x 720p 50 / 59.94 / 60 Hz 1920 x 1080i 50 / 59.94 / 60 Hz 1920 x 1080p 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60 Hz DTV 1280 x 720p 50 / 59.94 / 60 Hz 1920 x 1080i 50 / 59.94 / 60 Hz 1920 x 1080p 25 Hz ● Videos / Photos (In AllShare Play) Refer to "Supported Subtitle and AllShare Play file formats" in the Other Information section. English◀ ▶ How to watch the 3D image ● Method 1 N Some 3D modes may not be available depending on the format of the image source. N To watch in 3D, wear 3D Active Glasses and press the power button on the glasses. 1. Press the MENU button, use the ▲ or ▼ button to select Picture, and then press the ENTERE button. 2. Use the ▲ or ▼ button to select 3D, and then press the ENTERE button. English◀ ▶ 3. Use the ▲ or ▼ button to select 3D Mode, and then press the ENTERE button. 4. Using the ◄ or ► buttons, select the 3D Mode of the image you want to view. ● Method 2 1. Press the W button. And then you can view the 3D image. 2. If you want to change 3D options (such as 3D Perspective), press the MENU button, and then select Picture. 3. Go to Step 3 in the “Method 1”, and follow the directions from that point on. N To exit the 3D mode, press the W button again. English◀ ▶ Before using 3D function... N NOTE ● 3D Mode is set to Off automatically when you access AllShare Play or e-Manual functions. ● 3D Mode is set to memorised configuration value automatically, when changing the input source. ● Some Picture functions are disabled in 3D mode. ● PIP is not supported in 3D mode. ● 3D Active Glasses from Samsung’s previous product (IR type) or other manufacturers not be supported. ● When the TV is initially powered on, may take some time until the 3D display is optimized. English◀ ▶ ● The 3D Active Glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or TV. If there is a problem, keep other electronic devices as far away as possible from the 3D Active Glasses. ● Be sure to stay within the viewing angle and optimum TV viewing distance when watching 3D pictures. ● Otherwise, you may not be able to enjoy proper 3D effects. ● The ideal viewing distance should be three times or more the height of the screen. We recommend sitting with viewer’s eyes on a level with the screen. English◀ ▶ ❑ Using the Media Contents Enjoy photos, music and movie files saved on a USB Mass Storage Class (MSC) device. 1. Press the CONTENT button to select Media Play / AllShare Play Only for PDP 490 series . 2. Press ▲/▼ button to select desired menu (Videos, Photos, Music), then press the ENTERE button. 3. Press ▲/▼ button to select desired device, then press the ENTERE button again. English◀ ▶ ❑ Connecting a USB Device 1. Turn on your TV. 2. Connect a USB device containing photo, music and movie files to the USB port on the side of the TV. 3. When USB is connected to the TV, popup window appears. You can select the Videos, Photos or Music directly. N It might not work properly with unlicenced multimedia files. N Need-to-Know List before using Media Contents ● MTP (Media Transfer Protocol) is not supported. ● The file system supports FAT16, FAT32 and NTFS. ● Certain types of USB Digital camera and audio devices may not be compatible with this TV. English◀ ▶ ● Media Contents only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives, Flash Card Readers (USB HUB are not supported). Devices should be connected directly to the TV’s USB port. ● Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. ● The HDD (Hard Disk Drive) connected to USB is not supported. ● Do not disconnect the USB device while it is loading. ● The higher the resolution of the image, the longer it takes to display on the screen. ● The maximum supported JPEG resolution is 15360 x 8640 pixels. English◀ ▶ ● For unsupported or corrupted files, the “Not Supported File Format” message is displayed. ● MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a technology that supports the creation, distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements. ● A USB device that requires high power (more than 500mA or 5V) may not be supported. ● If the TV has been no input during time set in Auto Protection Time, the Screensaver will run. ● The power-saving mode of some external hard disk drives may be released automatically when connected to the TV. English◀ ▶ ● If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read. ● If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is not played, connect the USB device to the PC, format the device and check the connection. ● If a file deleted from the PC is still found when Media Contents is run, use the “Empty the Recycle Bin” function on the PC to permanently delete the file. ● Media Contents only supports sequential jpeg format. ● The scene search and thumbnail functions are not supported in the Videos. ● If the number of files and folders saved on a USB storage device is approximately over 4000, the files and folders may not appear and some folders may not be opened. English◀ ▶ Disconnecting a USB Device ● Method 1: Using the SOURCE button. 1. Press the SOURCE button. 2. Select a desired USB device, and then press the TOOLS button. The Tools menu appears. 3. Select Safely Remove USB Device, and then wait until the selected USB device is disconnected. You can remove a USB device from the TV. English◀ ▶ ● Method 2: Using the Media Play / AllShare Play Only for PDP 490 series home screen. 1. Go to Media Play / AllShare Play Only for PDP 490 series home screen. 2. Select any category, and then press the ENTERE button. 3. Select a desired USB device, and then press the TOOLS button. The Tools menu appears. 4. Select Safely Remove USB Device, and then wait until the selected USB device is disconnected. You can remove a USB device from the TV. N To remove a USB device from the TV, we recommend use Safely Remove USB Device function. English◀ ▶ ❑ Connecting to the PC through network for PDP 490 series You can play pictures, music and videos saved on your PC through a network connection in the AllShare Play mode over your TV. N If you want to use AllShare Play to play files saved on your PC over your TV, you should download “AllShare PC Software” and users manual from “www. samsung.com”. 1. For more information on how to configure your network, refer to ‘Network Connection’. – You are recommended to locate both TV and PC in same subnet. The first 3 parts of the IP address of the TV and PC should be the same and only the last part (the host address) should be changed. (e.g. IP Address: 123.456.789.**) English◀ ▶ 2. Using a LAN cable, connect between the external modem and the PC onto which the AllShare PC Software programme will be installed. – You can connect the TV to the PC directly without connecting it through a Sharer (Router). N Functions that are not supported when connecting to a PC through a network: ● The Background Music On and Background Music Setting functions. ● The � (REW) or µ (FF) button while a movie is playing. N The DivX DRM, Multi-audio, embedded caption does not supported. N AllShare PC Software should be permitted by the firewall programme on your PC. English◀ ▶ N When you use AllShare Play mode through a network connection, according to functions of the provided server: ● The sorting method may vary. ● The � (REW), µ (FF) or � (Pause) buttons may not work depending on the content information. N If you experience any file stuttering issue while playing a video over a wireless network, we recommend using a wired network. English◀ ▶ ❑ Screen Display Move to the desired file using the ◄/►/▲/▼ buttons and then press the ENTERE or � (Play) button. The screen may differ depending on the way to enter the screen. πµ Page Move E Play T Tools R Return Information: AllShare Play / Videos / SUM / 500 Days of... .avi 1/15 You can ascertain the selected device name, contents mode, folder/file name, page. Information: You can ascertain the name, size and created date of the selected file. Operation Buttons: - EPlay: Plays the selected file. - T Tools: Displays the option menu. - R Return: Move to the previous step. - �µ/b{ Page Move: Move to up or down page. File List Section: You can confirm the files and groups that are sorted by category. * The displayed image may differ depending on the model. English◀ ▶ ■ Videos Playing Video 1. Press the ◄/►/▲/▼ button to select the desired video in the file list. 2. Press the ENTERE button or � (Play) button. – The selected file name is displayed on the top with its playing time. – If video time information is unknown, play time and progress bar are not displayed. – During video playback, you can search using ◄ and ► button. – You can use (�) (REW) and (µ) (FF) buttons during playback. N In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself. English◀ ▶ ● Supported Subtitle Formats – External Name File extension MPEG-4 timed text .ttxt SAMI .smi SubRip .srt SubViewer .sub Micro DVD .sub or .txt SubStation Alpha .ssa Advanced SubStation Alpha .ass Powerdivx .psb – Internal Name Container Format Xsub AVI Picture Format SubStation Alpha MKV Text Format Advanced SubStation Alpha MKV Text Format SubRip MKV Text Format MPEG-4 Timed text MP4 Text Format English◀ ▶ ● Supported Video Formats File Extention Container Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Audio Codec *.avi *.mkv *.asf *.wmv *.mp4 *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.m2ts *.mts *.divx AVI MKV ASF MP4 3GP VRO VOB PS TS DivX 3.11/4.x/5.x/6.1 1920 x 1080 6~30 30 AC3 LPCM ADMPCM (IMA, MS) AAC HE-AAC WMA DD+ MPEG (MP3) DTS Core MPEG4 SP/ASP H.264 BP/MP/HP Motion JPEG 640 x 480 8 Window Media Video v9 MPEG2 1920 x 1080 30 MPEG1 English◀ ▶ Other Restrictions ● Video content will not play, or not play correctly, if there is an error in the content or the container. ● Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible Frame/sec listed in the table. ● If the Index Table is in error, the Seek (Jump) function is not supported. ● When playing the video through network, it may not work depending on the network status. When you play video over a network connection, the video may not be played smoothly. for PDP 490 series ● Some USB/digital camera devices may not be compatible with the player. ● The menu can be displayed late if the video is over 10Mbps(bit rate). English◀ ▶ Video decoder Audio decoder ● Supports up to H.264, Level 4.1 ● H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported. ● GMC is not supported. ● WMA supports up to 10 Pro 5.1 channel and M2 profile. (LBR mode of M0 is not supported) ● WMA lossless audio is not supported. English◀ ▶ ■ Photos Viewing a Photo (or Slide Show) 1. Press the ◄/►/▲/▼ button to select the desired photo in the file list. 2. Press the ENTERE button. N During the slide show, all files in the file list will be displayed in order. N When you press the � (Play) button in the file list, slide show will be started immediately. N During the slide show, you can adjust the slide show speed using � (REW) or µ (FF) button. N You can move to other file using ◄ or ► button. N Music files can be automatically played during the slide show if the Background Music On is set. English◀ ▶ ● Supported Photo Formats File Extension Type Resolution *.jpg JPEG 15360 X 8640 *.bmp BMP 1920 X 1080 *.mpo MPO 15360 X 8640 English◀ ▶ ■ Music Playing Music 1. Press the ◄/►/▲/▼ button to select the desired Music in the file list. 2. Press the ENTERE button or � (Play) button. – You can use � (REW) and µ (FF) buttons during playback. N Only displays the files with supported music file extension. Other file extensions are not displayed, even if they are saved on the same USB device. N If the sound is abnormal when playing music files, adjust the Equaliser in the Sound menu. (An over-modulated music file may cause a sound problem.) English◀ ▶ N Using the playback menu – Press the ◄/► button to select the desired menu. ● Play / Pause: You can start or stop a music. Alternatively, the � or � button on the remote. ● Repeat Mode (Off / One Song / All): You can play music files repeatedly. ● Shuffle Mode (Off / On): You can play the music randomly. ● Sound Mode (Standard / Music / Movie / Clear Voice / Amplify): You can adjust the sound setting. English◀ ▶ ● Supported Music Formats File Extension Type Codec Remark *.mp3 MPEG MPEG1 Audio Layer 3 *.m4a *.mpa *.aac *.3ga MPEG4 AAC *.flac FLAC FLAC • Seek is not supported. Supports up to 2ch. *.ogg OGG Vorbis • Supports up to 2ch. *.wma WMA WMA • WMA supports up to 10 Pro 5.1 channel and M2 profile. (LBR mode of M0 is not supported) English◀ ▶ ❑ Media Contents - Additional Functions Playing the selected Videos/Music/Photos files 1. Press the TOOLS button at each main screen and select Play selection. 2. Select the desired files. N The check box appears to the left of the selected files. 3. Press the ► button to select Play. N You can select or deselect all files pressing the Select All / Deselect All. English◀ ▶ Videos/Music/Photos Play Option menu During playing a file, press the TOOLS button. Category Operation Videos Photos Music Title Search You can move the other file directly. c Time Search You can search the video using ◄ and ► button at one minute interval or entering the number directly. N It may not be supported depending on the input source. c Repeat Mode You can play movie files repeatedly. c Picture Size You can adjust the picture size to your preference. c Picture Mode You can adjust the picture setting. c c Sound Mode You can adjust the sound setting. c c English◀ ▶ Category Operation Videos Photos Music Audio Language You can change the audio language if the video has more than one language. c Subtitle You can set subtitles on/off. c Subtitle Settings You can play the video with subtitles. This function only works if the subtitles are the same file name as the video. c Start Slide Show / Stop Slide Show You can start or stop a slide show. c Slide Show Speed You can select the slide show speed during the slide show. c Background Music On / Background Music Off You can set on/off background music when watching a slide show. c English◀ ▶ Category Operation Videos Photos Music Background Music Setting You can select background music when watching a slide show. c Zoom You can zoom into images in full screen mode. c Rotate You can rotate images in full screen mode. c Edit playlist You can edit the play list when playing the desired music. c Play selection Select and play multiple files. c Information You can see detailed information about the played file. c c c English◀ ▶ ❑ Using the DLNA Functions for PDP 490 series You can play media contents including videos, photos and music saved on your mobile phones or the other devices (such as your PC) by controlling them on the TV via the network. N First, configure your network. For detailed procedures on using the Network Setup, refer to the “Network Settings” instructions. N For more information, visit “www.samsung.com” or contact the Samsung call centre. Mobile devices may need additional software installation. For details, refer to each device’s user’s guide. N If your Samsung TV connects to a non-Samsung DLNA server, a compatibility issue may occur during video playback. English◀ ▶ N By connecting your Samsung TV to a network via AllShare™, you can use Samsung’s original functions as follows: – Playback of various video formats (DivX, MP4, 3GPP, AVI, ASF, MKV, etc.) – Video thumbnail feature – Bookmark function (to resume video playback) – Auto-chaptering (scene navigation) – Digital content management – Compatibility with various subtitle formats (SRT, SMI, SUB, TXT, TTXT) – Search with file names – And many others N To use the original DLNA functions of Samsung fully, it is recommended that you use the AllShare™ software provided with your TV. English◀ ▶ Playing the media contents saved on the devices 1. Connect the mobile phone or other devices which support AllShare Play function, and then play the media contents of each device. The popup screen appears on the bottom of your TV. 2. Select the Allow to accept the connected devices. The media contents of the devices can be playing on your TV. N You can find the allowed devices on the AllShare Settings. English◀ ▶ Using the AllShare Play function, play the media contents of the devices connected to DLNA function. 1. Press the CONTENT button to select AllShare Play. 2. Press ▲/▼ button to select desired menu (Videos, Photos, Music), then press the ENTERE button. 3. When the DLNA device is selected, press the ENTERE button again. 4. Press the ◄/►/▲/▼ button to select the desired file. 5. Press the ENTERE button. English◀ ▶ N NOTE ● Contents may not be played on your TV depending on their resolution and format. ● The ENTERE and ◄/► buttons may not work depending on the type of media content. ● Using the mobile device, you can control the media playing. For details, refer to each mobile’s user’s guide. English◀ ▶ Using the AllShare Settings function O MENUm → Network → AllShare Settings → ENTERE Shows a list of mobile phones or connected devices which have been set up with this TV for using the AllShare Settings function. N The AllShare Settings function is available in all devices which support DLNA DMC. ● Allow / Deny: Allows/Blocks the devices. ● Delete: Deletes the devices from the list. N This function only deletes the name of the devices from the list. If the deleted device is turned on or tries to connect to the TV, it may appear on the list again. English◀ ▶ ❑ Teletext Feature The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed. You can change Teletext pages by pressing the numeric buttons on the remote control. ● 0 (mode): Selects the Teletext mode (LIST/FLOF). If pressed during LIST mode, switches the mode to List save mode. In List save mode, you can save a Teletext page into a list using the 8(store) button. ● / (Teletext on/mix/off): Activates the Teletext mode for the current channel. Press the button twice to overlap the Teletext mode with the current broadcasting screen. Press it one more time to exit teletext. Other Information English◀ ▶ ● 1 (sub-page): Displays the available sub-page. ● 8 (store): Stores the Teletext pages. ● 6 (index): Displays the index (contents) page at any time while you are viewing Teletext. ● 4 (size): Displays the teletext on the upper half of the screen in double-size. To move the text to the lower half of the screen, press it again. For normal display, press it once again. ● 9 (hold): Holds the display at the current page, in the case that there are several secondary pages that follow automaticially. To undo, press it again. ● 2 (page up): Displays the next Teletext page. ● 3 (page down): Displays the previous Teletext page. English◀ ▶ ● 5 (reveal): Displays the hidden text (answers to quiz games, for example). To display the normal screen, press it again. ● 7 (cancel): Shrinks the Teletext display to overlap with the current broadcast. ● Colour buttons (red, green, yellow, blue): If the FASTEXT system is used by the broadcasting company, the different topics on a Teletext page are colourcoded and can be selected by pressing the coloured buttons. Press the colour corresponding to the topic of your choice. A new colourcoded page is displayed. Items can be selected in the same way. To display the previous or next page, press the corresponding coloured button. English◀ ▶ The Teletext pages are organized according to six categories: Part Contents A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text. F Status information. FASTEXT information. A E F B C D English◀ ▶ ❑ Anti-theft Kensington Lock The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use. N Please find a “K” icon on the rear of the TV. A kensington slot is beside the “K” icon. N The position and colour may differ depending on the model. To lock the product, follow these steps: 1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair. TV Rear Optional English◀ ▶ 2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable. 3. Insert the locking device into the Kensington slot on the product. 4. Lock the lock. N These are general instructions. For exact instructions, see the User manual supplied with the locking device. N The locking device has to be purchased separately. English◀ ▶ ❑ Connections Common Interface Slot To watch paid channels, the “CI or CI+ CARD” must be inserted. ● If you do not insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”. ● The pairing information containing a telephone number, the “CI or CI+ CARD” ID, the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. ● When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated. * The image may differ depending on the model. English◀ ▶ N NOTE ● You must obtain a “CI or CI+ CARD” from a local cable service provider. ● When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it. ● Insert the “CI or CI+ CARD” in the direction marked on the card. ● The location of the COMMON INTERFACE slot may be different depending on the model. ● “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. ● If you have any problems, please contact a service provider. ● Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or will not be seen. English◀ ▶ ❑ Troubleshooting If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com”, then click on Support. Issues Solutions and Explanations Picture Quality First of all, please perform the Picture Test and confirm that your TV is properly displaying test image. (go to MENU - Support - Self Diagnosis - Picture Test) If the test image is properly displayed, the poor picture may caused by the source or signal. English◀ ▶ Issues Solutions and Explanations The TV image does not look as good as it did in the store. ● If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (high definition) picture quality. LCD 420 does not support AV, Component mode ● Cable/Satellite subscribers: Try HD stations from the channel line up. ● Aerial connection: Try HD stations after performing Auto tuning. ● Many HD channels are up scaled from SD (Standard Definition) contents. ● Adjust the Cable/Set top box video output resolution to 1080i or 720p. ● Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal. English◀ ▶ Issues Solutions and Explanations The picture is distorted: macroblock error, small block, dots, pixelization ● Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies. ● Low signal level or bad quality can cause picture distortion. This is not a TV issue. ● Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV. Colour is wrong or missing. ● If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or loose connections may cause colour problems or a blank screen. LCD 420 does not support AV, Component mode English◀ ▶ Issues Solutions and Explanations There is poor colour or brightness. ● Adjust the Picture options in the TV menu. (go to Picture Mode / Colour / Brightness / Sharpness) ● Adjust Energy Saving option in the TV menu. (go to MENU - System - Eco Solution - Energy Saving) ● Try resetting the picture to view the default picture settings. (go to MENU - Picture - Reset Picture) There is a dotted line on the edge of the screen. ● If the picture size is set to Screen Fit, change it to 16:9. ● Change cable/satellite box resolution. The picture is black and white. ● If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV. LCD 420 does not support AV, Component mode English◀ ▶ Issues Solutions and Explanations When changing channels, the picture freezes or is distorted or delayed. ● If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box reboots. It may take up to 20 minutes. ● Set the output resolution of the cable box to 1080i or 720p. Sound Quality First of all, please perform the Sound Test to confirm that your TV audio is properly operating. (go to MENU - Support - Self Diagnosis - Sound Test) If the audio is ok, the sound problem may caused by the source or signal. There is no sound or the sound is too low at maximum volume. ● Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV. English◀ ▶ Issues Solutions and Explanations The picture is good but there is no sound. ● Set the Speaker Select option to TV Speaker in the sound menu. for LED, PDP TV ● If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV. ● If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s audio option to HDMI when you have a HDMI connected to your TV). ● If you are using a DVI to HDMI cable, a separate audio cable is required. ● Reboot the connected device by reconnecting the device’s power cable. ● If your TV has a headphone jack, make sure there is nothing plugged into it. English◀ ▶ Issues Solutions and Explanations The speakers are making an inappropriate noise. ● Check the cable connections. Make sure a video cable is not connected to an audio input. ● For aerial or cable connections, check the signal strength. Low signal level may cause sound distortion. No Picture, No Video The TV will not turn on. ● Make sure the AC power cord is securely plugged in to the wall outlet and the TV. ● Make sure the wall outlet is working. ● Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “The remote control does not work” below. English◀ ▶ Issues Solutions and Explanations The TV turns off automatically. ● Ensure the Sleep Timer is set to Off in the Time menu. ● If your PC is connected to the TV, check your PC power settings. ● Make sure the AC power cord is plugged in securely to the wall outlet and the TV. ● When watching TV from an aerial or cable connection, the TV will turn off after 10 ~ 15 minutes if there is no signal. English◀ ▶ Issues Solutions and Explanations There is no picture/ video. ● Check cable connections (remove and reconnect all cables connected to the TV and external devices). ● Set your external device’s (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV. ● Make sure your connected devices are powered on. ● Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control. ● Reboot the connected device by reconnecting the device’s power cable. English◀ ▶ Issues Solutions and Explanations RF(Cable/Aerial) Connection The TV is not receiving all channels. ● Make sure the Aerial cable is connected securely. ● Please try Setup (Initial setup) to add available channels to the channel list. Go to MENU - System - Setup (Initial setup) and wait for all available channels to be stored. ● Verify the Aerial is positioned correctly. The picture is distorted: macro block error small block, dots, pixelization ● Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action movies. ● A low signal can cause picture distortion. This is not a TV issue. English◀ ▶ Issues Solutions and Explanations Network Connection for PDP 490 series Software Upgrade over the network fails. ● Try Network Settings in Network menu. ● If you have latest SW version, SW upgrade will not proceed. Others The picture will not display in full screen. ● HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents. ● Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV. ● Adjust the picture size options on your external device or TV to full screen. English◀ ▶ Issues Solutions and Explanations Plasma TV is making humming noise. for PDP TV ● Plasma TVs typically make a soft humming sound. This is normal. It’s caused by the electrical charges that are used to create the images on the screen. ● If the humming sound is loud, you may have set the brightness on the TV too high. Try setting the brightness lower. ● You can also have loud humming if the back of your Plasma TV is too close to a wall or other hard surface. Also try rerouting your connection cables. ● Improper installation of wall mount can create excessive noise. Image Retention (Burn In) Issue. for PDP TV ● To minimize the possibility of screen burn, this unit is equipped with Pixel Shift screen burn reduction technology. Pixel Shift lets you set the picture so it moves slightly up and down (Vertical Line) and side to side (Horizontal Dot). The regular, slight movement of the picture reduces screen burn in. English◀ ▶ Issues Solutions and Explanations The remote control does not work. ● Replace the remote control batteries with the poles (+/–) in the right direction. ● Clean the sensor’s transmission window on the remote. ● Try pointing the remote directly at the TV from 5~6 feet away. The Cable/Set top box remote control doesn’t turn the TV on or off, or adjust the volume. ● Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the SAMSUNG TV code. A “Mode Not Supported” message appears. ● Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. English◀ ▶ Issues Solutions and Explanations There is a plastic smell from the TV. ● This smell is normal and will dissipate over time. The TV Signal Information is unavailable in the Self Diagnosis Test menu. ● This function is only available with digital channels from an Aerial / RF / Coax connection. TV is tilted to the right or left side. ● Remove the stand base from the TV and reassemble it. There are difficulties assembling the stand base. ● Make sure the TV is placed on a flat surface. If you can not remove the screws from the TV, please use a magnetized screw driver. English◀ ▶ Issues Solutions and Explanations The Channel menu is grey out (unavailable). ● The Channel menu is only available when the TV source is selected. Your settings are lost after 30 minutes or every time the TV is turned off. ● If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change the settings from Store Demo mode to Home Use mode in the Setup (Initial setup) procedure. Press the SOURCE button to select TV mode, and go to MENU → System → Setup (Initial setup) → ENTERE. You have intermittent loss of audio or video. ● Check the cable connections and reconnect them. ● Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors. English◀ ▶ Issues Solutions and Explanations You see small particles when you look closely at the edge of the frame of the TV. ● This is part of the product’s design and is not a defect. The PIP menu is not available. ● PIP functionality is only available when you are using a HDMI or components source. LCD 420 does not support AV, Component mode You turned the TV off 45 minutes ago, and it turned on again. ● It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst your watching TV. The message “Scrambled Signal” or “Weak or No Signal” appears. ● If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot. ● If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again. English◀ ▶ Issues Solutions and Explanations There are recurrent picture/sound issues. ● Check and change the signal/source. A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture. ● To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture. The message “This file may not be playable properly.” appears. ● This may appear because of high bit rate of content. Content generally will play but could experience some playability issue. English◀ ▶ ❑ Licence TheaterSound, SRS and symbol are trademarks of SRS Labs, Inc. TheaterSound technology is incorporated under license from SRS Labs, Inc. SRS TheaterSound™ provides the most immersive surround sound experience from the TVs built-in speakers, while maintaining steady volume and delivering rich bass and clear dialog. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. Only for LCD 420 series English◀ The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. DivX Certified® to play DivX® video up to HD 1080p, including premium content. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. Open Source Licence Notice In the case of using open source software, Open Source Licences are available on the product menu. Open Source Licence Notice is written only English. English Plasma TV user manual Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model _____________Serial No. _____________ E-MANUAL © 2012 Samsung Electronics Co., Ltd. All rights reserved. Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Customer Care Centre Web Site ALBANIA 42 27 5755 www.samsung.com AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com BELGIUM 02-201-24-18 www.samsung.com/be (Dutch) www.samsung.com/be_fr (French) BOSNIA 05 133 1999 www.samsung.com BULGARIA 07001 33 11 www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) www.samsung.com CZECH 800 - SAMSUNG (800-726786) www.samsung.com Samsung Electronics Czech and Slovak, s.r.o., Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8 DENMARK 70 70 19 70 www.samsung.com FINLAND 030 - 6227 515 www.samsung.com FRANCE 01 48 63 00 00 www.samsung.com GERMANY 01805 - SAMSUNG (726-7864 € 0,14/Min) www.samsung.com CYPRUS From landline : 8009 4000 www.samsung.com GREECE From landline : 80111-SAMSUNG (7267864) From landline & mobile : (+30) 210 6897691 www.samsung.com HUNGARY 06-80-SAMSUNG(726-7864) www.samsung.com ITALIA 800-SAMSUNG(726-7864) www.samsung.com KOSOVO +381 0113216899 www.samsung.com LUXEMBURG 261 03 710 www.samsung.com MACEDONIA 023 207 777 www.samsung.com MONTENEGRO 020 405 888 www.samsung.com NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com NORWAY 815-56 480 www.samsung.com POLAND 0 801-1SAMSUNG(172-678) +48 22 607-93-33 www.samsung.com PORTUGAL 808 20-SAMSUNG (808 20 7267) www.samsung.com RUMANIA From landline : 08010-SAMSUNG (7267864) From landline & mobile : (+40) 21 206 01 10 www.samsung.com SERBIA 0700 Samsung (0700 726 7864) www.samsung.com SLOVAKIA 0800 - SAMSUNG (0800-726 786) www.samsung.com/sk SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com SWITZERLAND 0848 - SAMSUNG(7267864, CHF 0.08/min) www.samsung.com/ch www.samsung.com/ch_fr (French) U.K 0330 SAMSUNG (7267864) www.samsung.com EIRE 0818 717100 www.samsung.com LITHUANIA 8-800-77777 www.samsung.com LATVIA 8000-7267 www.samsung.com ESTONIA 800-7267 www.samsung.com TURKEY 444 77 11 www.samsung.com BN68-04068E BN68-04068E-01 [PE530-XNZF]BN68-04068E-Cover.indd 1 2012-02-24 �� 10:20:34English - 2 For more information on how to use e-Manual (p. 9) Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Digital TV notice 1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal. 2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so on, are not included in this specification. So, they cannot be workable at this moment. 3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed. 4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business. 5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers. 6. For more information, please contact your local Samsung customer care centre. ✎ The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or not. User Instructions • Screen Image retention Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. • Heat on the top of the Plasma TV The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product. • The product is making a “cracking” noise. A “cracking” noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or humidity. This is normal and not a defect of the unit. • Cell Defects The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. • Avoid operating the TV at temperatures below 41°F (5°C) • A still image displayed too long may cause permanent damage to the PDP Panel. Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to the screen. Damages caused by the above effect are not covered by the Warranty. • After-images on the Screen. Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the “brightness” and “contrast” when displaying still images for a long time. • Warranty Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty. Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. [PE530-XNZF]BN68-04068E.indb 2 2012-02-15 �� 1:44:27English - 3 Accessories ✎Please make sure the following items are included with your TV. If any items are missing, contact your dealer. ✎The items’ colours and shapes may vary depending on the models. ✎Cables not included in the package contents can be purchased separately. • Remote Control & Batteries (AAA x 2) • Power Cord • Owner’s Instructions • Cleaning Cloth • Warranty Card / Safety Guide (Not available in some locations) Ferrite Core (1EA) ✎Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure. x A Maximum distance between the ferrite core and the end of the cord inserted in the TV: 3/4 inches (2 cm) A B Power Cord ✎An administration fee may be charged if either (a) an engineer is called out at your request and there is no defect in the product (i.e. where you have failed to read this user manual) (b) you bring the unit to a repair centre and there is no defect in the product (i.e. where you have failed to read this user manual) ✎The amount of such administration charge will be advised to you before any work or home visit is carried out. [PE530-XNZF]BN68-04068E.indb 3 2012-02-15 �� 1:44:27English - 4 Using the TV’s Controller (Panel Key) TV Controller is a multi directional button that helps navigate without remote control. ✎Some functions which require a PIN code may not be available. ✎The product colour and shape may vary depending on the model. ✎Exits the menu when pressing the controller more than 1 second. ✎When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first, you cannot operate it to move the up/down/left/right directions. Function menu Return Remote control sensor TV Controller Down (Front) Up (Rear) Left Right Power on Turns the TV on by pressing the controller in standby mode. Adjusting the volume Adjusts the volume by moving the controller from side to side when the power is on. Selecting a channel Selects a channel by moving the controller up and down when the power is on. Using the function menu Press the controller when the power is on, then the function menu screen appears. If you press it again, the function menu screen disappears. Using the Menu Selects the MENU(m) by moving the controller in the function menu screen. The OSD(On Screen Display) of your TV’s feature appears. Selecting the Source Selects the Source( ) by moving the controller in the function menu screen. The Source list screen appears. Selecting the Contents Home Selects the Contents Home( ) by moving the controller in the function menu screen. The Contents Home main screen appears. Power Off Selects the Power Off(P) to turn the TV off by moving the controller in the function menu screen. Standby mode Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord. Securing the Installation Space Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product. ✎When using a stand or wall-mount, use parts provided by Samsung Electronics only. x If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling. ✎The appearance may differ depending on the product. ✎Be careful when you contact the TV because some parts can be somewhat hot. Installation with a stand. Installation with a wall-mount. 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm [PE530-XNZF]BN68-04068E.indb 4 2012-02-15 �� 1:44:29English - 5 Viewing the Remote Control ✎This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, and Volume buttons. A B C D E-MANUAL P.SIZE AD/SUBT. CONTENT Installing batteries (Battery size: AAA) Turns the TV on and off. Displays and selects the available video sources. Returns to the previous channel. Cuts off the sound temporarily. Changes channels. Displays channel lists on the screen. Displays the EPG (Electronic Programme Guide). Displays information on the TV screen. Exits the menu. Press to directly access to channels. Adjusts the volume. Alternately select Teletext ON, Double, Mix or OFF. Displays the main on-screen menu. Quickly select frequently used functions. Views the Contents Home. Returns to the previous menu. Selects the on-screen menu items and changes the values seen on the menu. Use these buttons according to the direction on screen. Use these buttons in a specific feature. For details, refer to the e-Manual. E-MANUAL: Displays the e-Manual guide. (p. 9) P.SIZE: Selects the picture size. AD/SUBT.: Audio Description selection. (Not available in some locations) / Displays digital subtitles. [PE530-XNZF]BN68-04068E.indb 5 2012-02-15 �� 1:44:30English - 6 Initial Setup When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERP button. Setup is available only when the source is set to TV. 1. Menu Language: Selecting a menu language Press the ▲ or ▼ button, then press the ENTERE button. Select the desired OSD (On Screen Display) language. 2. Use Mode: Selecting Store Demo or Home Use Press the ▲ or ▼ button, then press the ENTERE button. Select the Home Use mode. Store Demo mode is for retail environments. ✎When pressing TV controller, the function menu screen appears. Select the MENU(m) and press it more than 5 seconds using the controller. The Store Demo mode is set. ✎Cancel the Store Demo by selecting Source( ) and pressing it more than 5 seconds. ✎Store Demo is only for shop display. If you select it, several functions are not able to use. Please select Home Use when you watch at home. 3. Country (Depending on the country): Selecting a country Press the ▲ or ▼ button, then press the ENTERE button. Select the appropriate country. ✎After selecting the country in the country menu, some models may proceed with an additional option to setup the pin number. 4. Auto Tuning (Step 1): Selecting how you watch your TV Let’s find and store channels on your TV. Do you need to search for channels? • Yes, I need to.: Memorises all of the available channels using RF cable. • No, I don’t need to.: You don’t need to use Auto Tuning to find channels. 5. Auto Tuning (Step 2): Selecting a search options Select the desired broadcasting signal and antenna source. Press the ▲/▼/◄/► button, then press the ENTERE button. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel → Auto Tuning. ✎Press the ENTERE button at any time to interrupt the memorisation process. ✎See e-Manual chapter “Retuning Channels > Auto Tuning” 6. Clock: Setting the Clock Mode • Auto: Set the current time automatically. • Manual: Allows you to manually set the current date and time. 7. Setup Complete Press the ENTERE button. ✎The completed settings are displayed. If You Want to Reset This Feature... You should do Setup (MENU → System) again at home although you did in shop. Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0” (except France). If you want to change the PIN number, use the Change PIN function. ✎If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0” (France: “1-1-1-1”): POWER (off) → MUTE → 8 → 2 → 4 → POWER (on). [PE530-XNZF]BN68-04068E.indb 6 2012-02-15 �� 1:44:31English - 7 Connections HDMI IN 2 HDMI IN 1 (DVI) COMPONENT / AV IN SERVICE VIDEO AUDIO ANT IN EXT (RGB) DIGITAL AUDIO OUT (OPTICAL) (5V 0.5A) OPTICAL EXT AUDIO OUT R-AUDIO-L PR PB Y AUDIO OUT COMPONENT OUT R-AUDIO-L VIDEO OUT R B R B GR R W R Y Y W R W R W R G AUDIO OUT DVI OUT HDMI OUT R-AUDIO-L PC R W VHF/UHF Antenna Cable USB or TV Rear Panel TV Side Panel BD Player / PC HDMI, HDMI/DVI connection Audio connection SCART connection Headphone connection BD Player Component connection BD Player AV connection ✎The position of port may differ depending on the model. ✎The PDP device may interfere with an amateur radio or AM radio. ✎When using two-way radio mobile and portable units or amateur radio or AM radio near by your TV, this may cause the TV to malfunction. ✎It supports both Component and AV connection in one port. VCR or DVD [PE530-XNZF]BN68-04068E.indb 7 2012-02-15 �� 1:44:32English - 8 SERVICE SERVICE Connector for service only. ✎NOTE • For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) port. • The interlace mode is not supported. • The set might operate abnormally if a non-standard video format is selected. • Separate and Composite modes are supported. SOG(Sync On Green) is not supported. • PC(D-Sub) input is not supported. • Connecting through the HDMI cable may not be supported depending on the PC. • The headphone jack supports only the 3 conductor tip-ring-sleeve (TRS) type. Connecting to a COMMON INTERFACE slot (Your TV viewing Card Slot) To watch paid channels, the “CI or CI+ CARD” must be inserted. • If you do not insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”. • The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. • When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated. TV Side Panel y The image may differ depending on the model. Changing the Input Source Source TV / Ext. / HDMI1/DVI / HDMI2 / AV / Component Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected to the TV. ✎In the displaying Source list, connected inputs will be highlighted. ✎PC(D-Sub) input is not supported. If you want to connect PC to the TV, use HDMI1/DVI input. ✎Ext. always stays activated. ✎Press the TOOLS button. • Edit Name You can set an external input sources name you want. – When connecting a PC to the HDMI IN 1(DVI) port with HDMI cable, you should set the TV to PC mode under Edit Name. – When connecting a PC to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under Edit Name. – When connecting an AV devices to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI Devices mode under Edit Name. • Information You can see detailed information about the connected external device. Display Modes (HDMI/DVI Input) Optimal resolution is 1920 x 1080@60Hz. See specification page for full available resolution. [PE530-XNZF]BN68-04068E.indb 8 2012-02-15 �� 1:44:33English - 9 How to use the e-Manual E-MANUAL You can find instructions about your TV’s features in the e-Manual in your TV. To use, press the E-MANUAL button on your remote. Move the cursor using the up/down/right/left buttons to highlight a category, then a topic, and then press the ENTERE button. The e-Manual displays the page you want to see. You can also access it through the menu: O MENUm→ Support → e-Manual → ENTERE ✎To return to the e-Manual main menu, press the E-MANUAL button on the remote. Screen Display Operation Buttons } Index: Displays the index screen. E Enter: Selects a category or sub-menu. e Exit: Exit the e-Manual. a Try now: Displays the OSD menu that corresponds to the topic. To return to the e-Manual screen, press the E-MANUAL button. b Home: Moves to the e-Manual home screen. L Page: Moves to previous or next page. { Zoom: Magnifies a screen. – Select the Zoom, and then press ENTERE to magnify the screen. You can scroll through the magnified screen by using the ▲ or ▼ buttons. To return to the screen to normal size, press the RETURN button. Basic Features Changing the Preset Picture Mode Adjusting Picture Settings Changing the Picture Options Changing the Preset Sound Mode Adjusting Sound Settings } Index E Enter e Exit Currently displayed video, TV Programme, etc. The category list. Press ◄ or ► button to select the category you want. Displays the sub-menu list. Use the arrow buttons on your remote to move the cursor. Press ENTERE button to select the submenu you want. How to toggle between an e-Manual topic and the corresponding OSD menu(s). ✎This function is not enabled in some menus. ✎You cannot use the Try now function if the menu is not activated. Method 1 Method 2 1. If you want to use the menu that corresponds to an e-Manual topic, press the red button to select Try now. 2. To return to the e-Manual screen, press the E-MANUAL button. 1. Press the ENTERE button when a topic is displayed. “Are you sure?” appears. Select Yes, and then press the ENTERE button. The OSD window appears. 2. To return to the e-Manual screen, press the E-MANUAL button. How to search for a topic on the index page ✎This function may not be supported depending on the language. 1. If you want to search a keyword, press the blue button to select Index. 2. Press the ◄ or ► button to select a character order you want. 3. Press the ▲ or ▼ button to select a keyword you want to see, and then press the ENTERE button. 4. You can view the corresponding e-Manual instruction screen. ✎To close the Index screen, press the RETURN button. [PE530-XNZF]BN68-04068E.indb 9 2012-02-15 �� 1:44:35English - 10 Installing the Wall Mount The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket. We do not advice you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own. Wall Mount Kit Specifications (VESA) ✎Wall mount kit is not supplied but sold separately. Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. ✎NOTE x Standard dimensions for wall mount kits are shown in the table below. x When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. x Do not use screws that do not comply with the VESA standard screw specifications. x Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set. x For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on their specifications. x Do not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. x Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. x Do not exceed 15 degrees tilt when mounting this TV. inches VESA Spec. (A * B) Standard Screw Quantity 43~51 400 X 400 M8 4 60~64 600 X 400 Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock. Securing the TV to the Wall Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows. To avoid the TV from falling 1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto the wall. ✎You may need additional material such as an anchor depending on the type of wall. ✎Since the necessary clamps, screws, and string are not supplied, please purchase these additionally. 2. Remove the screws from the centre back of the TV, put the screws into the clamps, and then fasten the screws onto the TV again. ✎Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications. 3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly. ✎NOTE • Install the TV near to the wall so that it does not fall backwards. • It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV. • Untie the string before moving the TV. 4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer. [PE530-XNZF]BN68-04068E.indb 10 2012-02-15 �� 1:44:36English - 11 Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, visit “www.samsung.com”, then click on Support, or call Samsung customer service centre. Issues The TV will not turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the TV. • Make sure the wall outlet is working. • Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “Remote control does not work” below. Issues There is no picture/video. • Check cable connections (remove and reconnect all cables connected to the TV and external devices). • Set your external device’s (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV. • Make sure your connected devices are powered on. • Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control. • Reboot the connected device by reconnecting the device’s power cable. Issues The remote control does not work. • Replace the remote control batteries with the poles (+/–) in the right direction. • Clean the sensor’s transmission window on the remote. • Try pointing the remote directly at the TV from 5~6 feet away. Issues The cable/set top box remote control doesn’t turn the TV on or off, or adjust the volume. • Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user manual for the SAMSUNG TV code. ✎You can keep your TV as optimum condition to upgrade the latest firmware on web site (www.samsung.com → Support → Downloads) by USB. Licence Storage and Maintenance ✎If you remove the attached sticker on the TV screen, clean the residues and then watch TV. ✎The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using the cloth provided or a soft cloth to prevent scratches. Do not spray water directly onto the product. Any liquid that goes into the product may cause a failure, fire, or electric shock. Clean the product with a soft cloth dapped in a small amount of water. Do not use a flammable liquid (e.g. benzene, thinners) or a cleaning agent. [PE530-XNZF]BN68-04068E.indb 11 2012-02-15 �� 1:44:37English - 12 Specifications Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity 10°C 40°C 50°F 104°F -20°C 45°C -4°F 113°F to ( to ) 10°C 40°C 50°F 104°F 10% to 80%, non-condensing -20°C 45°C -4°F 113°F to ( to ) 5% to 95%, non-condensing TV System Analogue: B/G, D/K, L, I (Depending on your country selection) Digital: DVB-T/DVB-C Colour/Video System Analogue: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60 Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0 Sound System BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC HDMI IN Video: 1080 24p, 1080p, 1080i, 720p, 576p, 480p Audio: 2Ch Linear PCM 32/44.1/48kHz, 16/20/24bits. Model Name PS51E530 PS60E530 Display Resolution 1920 X 1080 1920 X 1080 (Black & White) Screen Size 19 22 26 32 40 43 46 51 60 inches (128 cm) 19 22 26 32 40 43 46 51 60 inches (152 cm) Sound (Output) 10W X 2 Dimensions (WxDxH) Body With stand 1187.8 X 56.0 X 706.6 (mm) 1187.8 X 252.0 X 781.9 (mm) 1389.3 X 56.0 X 828.2 (mm) 1389.3 X 330.0 X 907.9 (mm) Weight Without Stand With Stand 19.6 kg 22.1 kg 28.3 kg 32.6 kg ✎Design and specifications are subject to change without prior notice. ✎For information about power supply, and more about power consumption, refer to the label attached to the product. ✎Typical power consumption is measured according to IEC 62087 Ed.2 BN68-03998E-ENG.indd 12 2012-02-27 �� 2:36:29English - 13 Supported Video Formats File Extention Container Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Audio Codec *.avi *.mkv *.asf *.wmv *.mp4 *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.m2ts *.mts *.divx AVI MKV ASF MP4 3GP VRO VOB PS TS DivX 3.11/4.x/5.x/6.1 1920 x 1080 6~30 30 AC3 LPCM ADMPCM (IMA, MS) AAC HE-AAC WMA DD+ MPEG (MP3) DTS Core MPEG4 SP/ASP H.264 BP/MP/HP Motion JPEG 640 x 480 8 Window Media Video v9 MPEG2 1920 x 1080 30 MPEG1 Full available resolution: 1920 X 1080 @ 60 Hz Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V) IBM 640 x 350 31.469 70.086 25.175 +/- 720 x 400 31.469 70.087 28.322 -/+ MAC 640 x 480 35.000 66.667 30.240 -/- 832 x 624 49.726 74.551 57.284 -/- 1152 x 870 68.681 75.062 100.000 -/- VESA DMT 640 x 480 31.469 59.940 25.175 -/- 640 x 480 37.861 72.809 31.500 -/- 640 x 480 37.500 75.000 31.500 -/- 800 x 600 37.879 60.317 40.000 +/+ 800 x 600 48.077 72.188 50.000 +/+ 800 x 600 46.875 75.000 49.500 +/+ 1024 x 768 48.363 60.004 65.000 -/- 1024 x 768 56.476 70.069 75.000 -/- 1024 x 768 60.023 75.029 78.750 +/+ 1152 x 864 67.500 75.000 108.000 +/+ 1280 x 720 45.000 60.000 74.250 +/+ 1280 x 800 49.702 59.810 83.500 -/+ 1280 x 1024 63.981 60.020 108.000 +/+ 1280 x 1024 79.976 75.025 135.000 +/+ 1366 x 768 47.712 59.790 85.500 +/+ 1440 x 900 55.935 59.887 106.500 -/+ 1600 x 900RB 60.000 60.000 108.000 +/+ 1680 x 1050 65.290 59.954 146.250 -/+ 1920 x 1080 67.500 60.000 148.500 +/+ [PE530-XNZF]BN68-04068E.indb 13 2012-02-15 �� 1:44:40Français - 2 Pour plus d'informations sur l'utilisation du manuel électronique (P. 9) Les figures et illustrations contenues dans ce mode d’emploi sont fournies pour référence uniquement. Elles peuvent différer de l’aspect réel du produit. La conception et les spécifications du produit sont susceptibles d’être modifiées sans préavis. Avis concernant le téléviseur numérique 1. Les fonctions relatives à la télévision numérique (DVB) ne sont disponibles que dans les pays ou régions où des signaux terrestres numériques de type DVB-T (MPEG2 et MPEG4 AVC) sont diffusés ou dans lesquels vous avez accès à un service de télévision par câble compatible DVB-C (MPEG2 et MPEG4 AAC). Consultez votre distributeur local pour connaître les possibilités en matière de réception des signaux DVB-T ou DVB-C. 2. DVB-T est la norme du consortium européen DVB pour la diffusion de signaux terrestres de télévision numérique. La norme DVB-C est, quant à elle, prévue pour la diffusion des signaux de télévision numérique par câble. Certaines fonctions particulières, telles que le guide électronique des programmes (Electric Program Guide - EPG) ou encore la vidéo à la demande (Video On Demand - VOD), ne sont toutefois pas incluses dans cette spécification. Dès lors, elles ne seront pas traitées pour l’instant. 3. Bien que ce téléviseur soit conforme aux dernières normes DVB-T et DVB-C (août 2008), il n’est pas garanti qu’il soit compatible avec les futures diffusions de signaux numériques terrestres DVB-T et par câble DVB-C. 4. En fonction du pays ou de la région où vous vous trouvez, certains opérateurs de télévision par câble peuvent facturer des frais supplémentaires pour un tel service. Il se peut également que vous deviez accepter les termes et conditions de ces sociétés. 5. Il se peut que certaines fonctions de TV numérique ne soient pas disponibles dans certains pays ou certaines régions et que la réception des signaux DVB-C ne soit pas correcte avec tous les opérateurs. 6. Pour plus d’informations, contactez votre service client Samsung. ✎ Les différentes méthodes de diffusion adoptées en fonction des pays peuvent affecter la qualité de réception du téléviseur. Vérifiez le fonctionnement du téléviseur chez votre revendeur agréé SAMSUNG ou contactez le centre d’appel de Samsung pour savoir s’il est possible d’en améliorer les performances en reconfigurant les réglages. Instructions d'utilisation • Rémanence à l'écran N’affichez pas une image figée (telle qu’elle apparaît sur un jeu vidéo) sur l’écran plasma au-delà de quelques minutes, sinon cela risquerait de provoquer une rémanence à l’écran. Cette rémanence de l'image est également appelée "brûlure de l'écran". Pour éviter la rémanence, réduisez le niveau de contraste ou de luminosité de l'écran lorsque vous affichez une image figée. • Chaleur diffusée sur la partie supérieure du téléviseur à écran plasma Le dessus de l'appareil peut chauffer en cas d'utilisation prolongée, car la chaleur s'échappe du panneau par le trou d'aération situé dans la partie supérieure du produit. Ce phénomène est normal et n'indique aucunement la présence d'un défaut ou d'un dysfonctionnement. Il convient cependant d'empêcher les enfants de toucher la partie supérieure de l'écran. • Le produit fait un bruit de "claquement". Ce bruit de "claquement" risque d'être perceptible lorsque le produit se contracte ou s'étend suite à un changement du milieu ambiant, tel que la température ou l'humidité. Ce phénomène est normal et ne constitue pas un défaut. • Défauts de cellule L'écran plasma utilise un panneau constitué de 2 360 000 (niveau HD) à 6 221 000 (niveau FHD) pixels dont la fabrication fait appel à une technologie avancée. Il se peut toutefois que quelques points clairs ou sombres apparaissent à l'écran. Ils n'ont aucune incidence sur la performance du produit. • Evitez d'utiliser le téléviseur à des températures inférieures à 5 °C (41 °F). • Une image figée affichée pendant une période prolongée peut endommager définitivement l'écran plasma. Visionner pendant longtemps le téléviseur à écran plasma au format 4/3 risque de laisser apparaître des traces de bordures sur la gauche, sur la droite et au centre de l’écran. Ces traces sont dues à la différence de luminosité sur l’écran. Lire un DVD ou un jeu vidéo sur console risque de provoquer des effets similaires sur l'écran. Les dommages provoqués par l'effet susmentionné ne sont pas couverts par la garantie. • Images rémanentes à l’écran. L'affichage d'images fixes de jeux vidéo et d'ordinateurs pendant une période excessive peut produire des rémanences. Pour empêcher ce phénomène, réduisez la luminosité et le contraste en cas d'affichage prolongé d'images figées. • Garantie La garantie ne couvre pas les dommages causés par la rémanence. Les brûlures ne sont pas couvertes par la garantie. Instructions de mise au rebut de ce produit (Déchets d'équipements électriques et électroniques) (Applicable dans les pays de l'Union Européenne et dans d'autres pays européens pratiquant la collecte sélective de déchets) Ce symbole sur le produit, ses accessoires ou sa documentation indique que ni le produit, ni ses accessoires électroniques usagés (chargeur, casque audio, câble USB, etc.) ne peuvent être jetés avec les autres déchets ménagers. La mise au rebut incontrôlée des déchets présentant des risques pour l'environnement et la santé publique, veuillez séparer vos produits et accessoires usagés des autres déchets. Vous favoriserez ainsi le recyclage de la matière qui les compose dans le cadre d'un développement durable. Les particuliers sont invités à contacter le magasin leur ayant vendu le produit ou à se renseigner auprès des autorités locales pour connaître les procédures et les points de collecte de ces produits en vue de leur recyclage. Les utilisateurs professionnels doivent contacter leur fournisseur et consulter les conditions générales du contrat d'achat. Ce produit et ses accessoires ne peuvent être jetés avec les autres déchets professionnels et commerciaux. Élimination des batteries de ce produit (Applicable aux pays de l'Union européenne et aux autres pays européens dans lesquels des systèmes de collecte sélective sont mis en place.) Le symbole sur la pile, le manuel ou l'emballage indique que les batteries de ce produit ne doivent pas être éliminées en fin de vie avec les autres déchets ménagers. L'indication éventuelle des symboles chimiques Hg, Cd ou Pb signifie que la pile ou l'accumulateur contient des quantités de mercure, de cadmium ou de plomb supérieures aux niveaux de référence stipulés dans la directive CE 2006/66. Si les piles ne sont pas correctement éliminées, ces substances peuvent porter préjudice à la santé humaine ou à l'environnement. Afin de protéger les ressources naturelles et de favoriser la réutilisation du matériel, veillez à séparer les batteries des autres types de déchets et à les recycler via votre système local de collecte gratuite des piles et accumulateurs. [PE530-XNZF]BN68-04068E.indb 2 2012-02-15 �� 1:44:41Français - 3 Accessoires ✎Vérifiez que les éléments suivants sont inclus avec votre téléviseur. S’il manque des éléments, contactez votre revendeur. ✎La couleur et la forme des éléments peuvent varier en fonction du modèle. ✎Les câbles qui ne se trouvent pas dans le contenu de l'emballage peuvent être achetés séparément. • Télécommande et piles (AAA x 2) • Câble d'alimentation • Instructions d’utilisation • Chiffon de nettoyage • Carte de garantie / Manuel de sécurité (non disponible dans certains pays) Tore magnétique (1EA) ✎Blindage magnétique pour cordon d'alimentation : le blindage magnétique sert à protéger les câbles des interférences. Lors de la connexion d'un câble, ouvrez le blindage magnétique et rabattez-le autour du câble près de la prise, comme illustré. x A Distance maximale entre le blindage magnétique et l'extrémité du cordon insérée dans le téléviseur : 3/4 pouces (2 cm) A B Câble d'alimentation ✎Des frais d’administration peuvent vous être facturés si : (a) un technicien intervient à votre demande et que le produit ne comporte aucun défaut (c.-à-d; si vous n’avez pas pris la peine de lire le présent manuel d’utilisation) (b) vous amenez le produit dans un centre de réparation alors qu’il ne comporte aucun défaut (c.-à-d; si vous n’avez pas pris la peine de lire le présent manuel d’utilisation) ✎Le montant de ces frais d’administration vous sera signifié avant la réalisation de toute prestation ou visite à domicile. [PE530-XNZF]BN68-04068E.indb 3 2012-02-15 �� 1:44:41Français - 4 Utilisation du contrôleur du téléviseur (touche de panneau) Le Contrôleur TV est un bouton multi-directionnel qui permet la navigation sans télécommande. ✎Certaines fonctions exigeant un code PIN peuvent ne pas être disponibles. ✎La couleur et la forme du produit peuvent varier en fonction du modèle. ✎Pour quitter le menu, veuillez appuyer sur le bouton pendant plus d’une seconde. ✎Lorsque vous sélectionnez la fonction en déplaçant le contrôleur vers le haut, le bas, la gauche ou la droite, veillez à ne pas appuyer sur ce dernier. Si vous appuyez dessus, vous ne pouvez plus vous en servir pour effectuer un déplacement dans ces directions. Menu Fonction Retour Capteur de la télécommande Contrôleur TV Bas (avant) Haut (arrière) Gauche Droite Marche Permet d'allumer le téléviseur en appuyant sur le contrôleur en mode Veille. Réglage du volume Permet de régler le volume en déplaçant le contrôleur de gauche à droite lorsque le téléviseur est allumé. Sélection d'une chaîne Permet de sélectionner une chaîne en déplaçant le contrôleur de haut en bas lorsque le téléviseur est allumé. Utilisation du menu Fonction Appuyez sur le contrôleur lorsque le téléviseur est allumé afin de faire apparaître l'écran du menu des fonctions. Pour faire disparaître cet écran, appuyez une nouvelle fois. Utilisation du Menu Permet de sélectionner le MENU(m) en déplaçant le contrôleur dans l'écran du menu des fonctions. Le menu OSD s'affiche sur l'écran du téléviseur. Sélection de la source Permet de sélectionner la Source( ) en déplaçant le contrôleur dans l'écran du menu des fonctions. La liste Source s'affiche. Sélection de l'Accueil contenu Permet de sélectionner Accueil contenu( ) en déplaçant le contrôleur dans l'écran du menu des fonctions. L'écran principal Accueil contenu s'affiche. Mise hors tension Permet de sélectionner la fonction Eteindre(P) afin de mettre le téléviseur hors tension en déplaçant le contrôleur dans l'écran du menu des fonctions. Mode Veille Ne laissez pas le téléviseur en mode Veille pendant de longues périodes (lorsque vous partez en vacances, par exemple). L’appareil consomme toujours une petite quantité d’énergie, même lorsque le bouton marche/arrêt est en position Off. Il est préférable de débrancher le cordon d’alimentation. Sécurisation de l’espace d’installation Maintenez les distances requises entre le produit et les autres objets (par exemple, les murs) afin de garantir une ventilation adaptée. Le non-respect de ces distances peut provoquer un incendie ou un problème au produit en raison d’une augmentation de la température interne de celui-ci. ✎Lors de l’utilisation d’un pied ou d’un support mural, utilisez uniquement les pièces fournies par Samsung Electronics. x L’utilisation de pièces fournies par un autre fabricant peut occasionner un problème au niveau du produit ou la chute de celui-ci, ce qui pourrait vous blesser. ✎L’aspect peut varier en fonction du produit. ✎Soyez prudent lorsque vous touchez le téléviseur, car certaines parties peuvent être brûlantes. Installation avec un pied. Installation avec un support de montage mural. 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm [PE530-XNZF]BN68-04068E.indb 4 2012-02-15 �� 1:44:42Français - 5 Présentation de la télécommande ✎Ceci est une télécommande spéciale destinée aux malvoyants. Elle dispose de points Braille sur les boutons Power, Channel et Volume. A B C D E-MANUAL P.SIZE AD/SUBT. CONTENT Installation des piles (type de pile : AAA) Permet d’allumer et éteindre la télévision. Permet d’afficher et de sélectionner les sources vidéo disponibles. Permet de revenir à la chaîne précédente. Permet de couper temporairement le son. Permet de changer de chaîne. Affiche la liste des chaînes à l’écran. Permet d’afficher le Guide électronique des programmes (EPG). Permet d’afficher des informations sur l’écran du téléviseur. Permet de quitter le menu. Appuyez pour atteindre les chaînes directement. Permet de régler le volume. Choisissez Teletext Activé, Double, Mix ou ARRET. Permet d’afficher le menu principal à l’écran. Permet de sélectionner rapidement les fonctions fréquemment utilisées. Affiche l'Accueil contenu. Permet de revenir au menu précédent. Permettent de sélectionner des éléments de menu à l’écran et de modifier les valeurs des menus. Utilisez ces boutons conformément aux instructions affichées à l'écran. Ces boutons ont des fonctions spécifiques. Pour plus d’informations, reportez-vous au manuel électronique. E-MANUAL: affiche le Guide e-Manual. (p. 9) P.SIZE: permet de sélectionner le format de l'image. AD/SUBT.: Sélection de la description audio. (Non disponible dans tous les pays) / permet d'afficher les sous-titres numériques. [PE530-XNZF]BN68-04068E.indb 5 2012-02-15 �� 1:44:43Français - 6 Configuration initiale Lorsque le téléviseur est allumé pour la première fois, plusieurs invites s'affichent pour vous aider à configurer les réglages de base. Appuyez sur le bouton POWERP. Configuration n'est disponible que lorsque la source est définie sur TV. 1. Langue des menus : Sélection de la langue des menus Appuyez sur le bouton ▲ ou ▼, puis sur ENTERE. Sélectionnez la langue de votre choix pour l'affichage à l'écran. 2. Mode Utilisation : Sélection du mode Util.magasin ou Util. domicile Appuyez sur le bouton ▲ ou ▼, puis sur ENTERE. Sélectionnez le mode Util. domicile. Le mode Util.magasin est prévu pour un usage en magasin. ✎L'écran du menu des fonctions s'affiche lorsque vous appuyez sur le contrôleur TV. Sélectionnez le bouton MENU(m) et maintenez-le enfoncé pendant plus de 5 secondes à l'aide du contrôleur. Le mode Util.magasin est défini. ✎Pour annuler le mode Util.magasin, sélectionnez le bouton Source( ) et maintenez-le enfoncé pendant plus de 5 secondes. ✎Util.magasin est disponible uniquement pour une exposition en magasin. Si vous sélectionnez cette option, plusieurs fonctions ne sont pas disponibles. Sélectionnez Util. domicile lorsque vous regardez le téléviseur à la maison. 3. Pays (en fonction du pays) : Sélection d'un pays Appuyez sur le bouton ▲ ou ▼, puis sur ENTERE. Sélectionnez le pays de votre choix. ✎Après la sélection du pays dans le menu Pays, certains modèles peuvent demander, en plus, le code PIN. 4. Recherche automatique (Etape 1) : sélection du mode de visionnage du téléviseur Trouvons et mémorisons les chaînes sur votre TV. Avez-vous besoin de rechercher les chaînes ? • Oui, j’en ai besoin.: mémorise toutes les chaînes disponibles à l’aide d’un câble RF. • Non, je n’en ai pas besoin.: Il est inutile d’utiliser la fonction de recherche automatique pour trouver des chaînes. 5. Recherche automatique (Etape 2) : sélection d'une option de recherche Sélectionnez le signal de diffusion et la source d'antenne de votre choix. Appuyez sur le bouton ▲/▼/◄/► et appuyez ensuite sur ENTERE. Lors du réglage de la source d'antenne sur Câble, une fenêtre s'affiche pour vous permettre d'attribuer des valeurs numériques (fréquences) aux chaînes. Pour plus d'informations, reportez-vous à Canal → Recherche automatique. ✎Appuyez sur le bouton ENTERE à tout moment pour interrompre la mémorisation. ✎Reportez-vous à l’e-Manual, sous “Nouvelle recherche des chaînes > Recherche automatique” 6. Horloge : réglage du mode Horloge • Auto: permet de régler l'heure actuelle automatiquement. • Manuel: permet de définir manuellement la date et l'heure actuelles. 7. Configuration terminée Appuyez sur le bouton ENTERE. ✎Les paramètres terminés s'affichent. Si vous souhaitez réinitialiser cette fonction... Vous devez de nouveau sélectionner Configuration (MENU → Système) chez vous, bien que vous l'ayez déjà fait en magasin. Sélectionnez Système - Configuration (Configuration initiale). Entrez votre code PIN à quatre chiffres. Le code PIN par défaut est "0-0- 0-0".(excepte France) Si vous souhaitez modifier le code PIN, utilisez la fonction Modifier PIN. ✎Si vous avez oublié le code PIN, appuyez sur les boutons de la télécommande dans l’ordre suivant, ce qui a pour effet de le réinitialiser sur "0-0-0-0" (France: “1-1-1-1”): POWER (arrêt) → MUTE → 8 → 2 → 4 → POWER (marche). [PE530-XNZF]BN68-04068E.indb 6 2012-02-15 �� 1:44:43Français - 7 Connexions HDMI IN 2 HDMI IN 1 (DVI) COMPONENT / AV IN SERVICE VIDEO AUDIO ANT IN EXT (RGB) DIGITAL AUDIO OUT (OPTICAL) (5V 0.5A) OPTICAL EXT AUDIO OUT R-AUDIO-L PR PB Y AUDIO OUT COMPONENT OUT R-AUDIO-L VIDEO OUT R B R B GR R W R Y Y W R W R W R G AUDIO OUT DVI OUT HDMI OUT R-AUDIO-L PC R W Antenne VHF/UHF Câble USB ou Panneau arrière du téléviseur Panneau latéral du téléviseur Lecteur BD / PC Connexion HDMI, HDMI/DVI Connexion audio Connexion SCART Connexion de Casque Lecteur BD Connexion à composantes Lecteur BD Connexion AV ✎L'emplacement du port peut varier en fonction du modèle. ✎Les connexions Composante et AV sont prises en charge par un seul port. Magnétoscope ou lecteur DVD ✎L’appareil PDP peut créer des interférences avec la radio amateur ou la radio AM. ✎L’utilisation de radios portables ou mobiles, d’émetteurs-récepteurs, ainsi que de radios amateur ou AM près de votre téléviseur pourrait engendrer des dysfonctionnements de l’appareil. [PE530-XNZF]BN68-04068E.indb 7 2012-02-15 �� 1:44:44Français - 8 SERVICE SERVICE Prise pour tests uniquement. ✎REMARQUE • Vous devez utiliser le port HDMI IN 1(DVI) pour connecter un câble HDMI/DVI. • Le mode entrelacé n’est pas pris en charge. • Le téléviseur peut fonctionner de façon anormale si le format vidéo sélectionné n’est pas standard. • Les modes Séparé et Composite sont pris en charge. Le mode SOG (Sync On Green) n’est pas pris en charge. • L’entrée PC(D-Sub) n’est pas prise en charge. • En fonction du PC, la connexion à l'aide du câble HDMI peut ne pas être prise en charge. • La prise casque ne prend en charge que le type TRS (tip-ring-sleeve) à 3 conducteurs. Connexion à une fente pour INTERFACE COMMUNE (fente pour carte de visualisation de programmes télévisés) Pour regarder les chaînes payantes, la carte CI ou CI+ doit être insérée. • Si vous ne l'insérez pas, certaines chaînes afficheront le message "Signal brouillé". • Les informations de pairage contenant un numéro de téléphone, l'ID de la carte CI ou CI+, l'ID de l'hôte et d'autres informations s'afficheront après 2 ou 3 minutes. Si un message d'erreur s'affiche, contactez votre fournisseur de service. • Lorsque la configuration des informations sur les canaux est terminée, le message "Mise à jour terminée" s'affiche, indiquant que la liste des chaînes est mise à jour. Panneau latéral du téléviseur y L'image peut varier en fonction du modèle. Changement de la source d'entrée Source TV / Ext. / HDMI1/DVI / HDMI2 / AV / Composant Permet de sélectionner le téléviseur ou d’autres sources d’entrée externes (telles qu’un lecteur DVD, un lecteur Blu-ray, un décodeur câble ou un récepteur décodeur) connectées au téléviseur. ✎Les entrées connectées sont mises en surbrillance dans la liste Source qui s'affiche. ✎L’entrée PC(D-Sub) n’est pas prise en charge. Pour connecter un PC au téléviseur, utilisez l’entrée HDMI1/DVI. ✎L’option Ext. reste activée en permanence. ✎Appuyez sur le bouton TOOLS. • Modif. Nom Vous pouvez définir le nom de la source d'entrée externe de votre choix. – Lorsque vous connectez un PC au port HDMI IN 1(DVI) avec un câble HDMI, vous devez définir le téléviseur en mode PC sous Modif. Nom. – Lorsque vous connectez un PC au port HDMI IN 1(DVI) avec un câble HDMI vers DVI, vous devez définir le téléviseur en mode DVI PC sous Modif. Nom. – Lorsque vous connectez un périphérique AV au port HDMI IN 1(DVI) avec un câble HDMI vers DVI, vous devez définir le téléviseur en mode Périph. DVI sous Modif. Nom. • Information Vous pouvez afficher des informations détaillées sur le périphérique externe connecté. Modes d’affichage (entrée HDMI/DVI) La résolution optimale est de 1920 X 1080 à 60 Hz. Reportez-vous à la page des caractéristiques techniques pour accéder à la résolution complète. [PE530-XNZF]BN68-04068E.indb 8 2012-02-15 �� 1:44:46Français - 9 Consultation du e-Manual E-MANUAL Vous trouverez des instructions sur les caractéristiques de votre téléviseur dans le e-Manual de ce dernier. Pour l'utiliser, appuyez sur le bouton E-MANUAL de votre télécommande. Déplacez le curseur à l'aide des boutons Haut/Bas/Gauche/Droite afin de mettre en surbrillance une catégorie, puis une rubrique. Appuyez ensuite sur le bouton ENTERE. Le e-Manual affiche la page souhaitée. Vous pouvez également y accéder via le menu : O MENUm→ Assistance → e-Manual → ENTERE ✎Pour revenir au menu principal du e-Manual, appuyez sur le bouton E-MANUAL de la télécommande. Affichage Boutons de fonctionnement } Index: affiche l'écran d'index. E Entrer: sélectionne une catégorie ou un sous-menu. e Quitter: permet de quitter le manuel électronique. a Essayer: affiche le menu à l'écran correspondant à la rubrique. Pour revenir à l'écran du manuel électronique, appuyez sur le bouton E-MANUAL. b Accueil: permet d'accéder à l'écran d'accueil du manuel électronique. L Page: permet de passer à la page précédente ou suivante. { Zoom: agrandit l'écran. – Sélectionnez l'option Zoom souhaitée, puis appuyez sur ENTERE pour agrandir l'écran. Pour parcourir l'écran agrandi, utilisez le bouton ▲ ou ▼. Pour revenir à un affichage normal de l'écran, appuyez sur le bouton RETURN. Fonctions de base Changement du mode Image prédéfini Réglages des paramètres de l’image Modification des options d’image Changement du mode Son prédéfini Réglage des paramètres sonores } Index E Entrer e Quitter Vidéo, programme télévisé, etc actuellement affiché. Liste des catégories. Appuyez sur le bouton ◄ ou ► pour sélectionner la catégorie de votre choix. Affiche la liste des sous-menus. Utilisez les touches fléchées de votre télécommande pour déplacer le curseur. Appuyez sur le bouton ENTERE pour sélectionner le sous-menu de votre choix. Comment basculer entre une rubrique du e-Manual et le(s) menu(s) correspondant(s) affiché(s) à l'écran ✎Cette fonction n’est pas disponible dans certains menus. ✎Vous ne pouvez pas utiliser la fonction Essayer si le menu n’est pas activé. Méthode 1 Méthode 2 1. Si vous souhaitez utiliser le menu correspondant à une rubrique de l'e-Manual, appuyez sur le bouton rouge afin de sélectionner l'option Essayer. 2. Pour revenir à l'écran du e-Manual, appuyez sur le bouton E-MANUAL. 1. Appuyez sur le bouton ENTERE lorsqu'une rubrique s'affiche. Le message "Exécuter ?" s'affiche. Sélectionnez Oui, puis appuyez sur le bouton ENTERE. La fenêtre des menus à l'écran s'affiche. 2. Pour revenir à l'écran du e-Manual, appuyez sur le bouton E-MANUAL. Recherche d’une rubrique dans la page d’index ✎Cette fonction n’est peut-être pas prise en charge dans cette langue. 1. Si vous souhaitez rechercher un mot-clé, appuyez sur le bouton bleu afin d’ouvrir l’écran Index. 2. Appuyez sur le bouton ◄ ou ► pour sélectionner l’ordre des caractères de votre choix. 3. Appuyez sur le bouton ▲ ou ▼ pour sélectionner le mot-clé à afficher et appuyez ensuite sur ENTERE. 4. Vous accédez alors à l’écran d’instructions correspondant du manuel électronique. ✎Pour fermer l’écran Index, appuyez sur le bouton RETURN. [PE530-XNZF]BN68-04068E.indb 9 2012-02-15 �� 1:44:47Français - Installation du support mural Les éléments du support mural (vendus séparément) permettent de fixer le téléviseur au mur. Pour plus d’informations sur l’installation du support mural, reportez-vous aux instructions fournies avec les éléments du support mural. Faites appel à un technicien pour installer la fixation murale. Nous ne vous conseillons pas de le faire vous-même. Si vous choisissez d’effectuer vous-même l’installation murale, Samsung Electronics ne saurait être tenue responsable des éventuels dommages matériels ou des éventuelles blessures dont vous, ou d’autres personnes, pourriez être victimes. Caractéristiques du kit de fixation murale (VESA) ✎Le kit de fixation murale est vendu séparément. Installez votre fixation murale sur un mur solide perpendiculaire au sol. Si vous souhaitez la fixer sur d’autres matériaux de construction, veuillez prendre contact avec votre revendeur le plus proche. Si vous l’installez au plafond ou sur un mur non droit, la fixation risque de tomber et de provoquer de graves blessures. ✎REMARQUE x Les dimensions standard pour tous les kits de fixation murale sont indiquées dans le tableau ci-dessous. x Le kit de fixation murale s’accompagne d’un manuel d’installation détaillé et de toutes les pièces nécessaires au montage. x N’utilisez pas de vis plus longues que la dimension standard, car elles pourraient endommager l’intérieur du téléviseur. x N’utilisez pas de vis non conformes aux spécifications des vis VESA standard. x Pour les fixations murales non conformes aux spécifications des vis VESA standard, la longueur des vis peut varier, selon leurs caractéristiques. x Ne serrez pas trop les vis ; cela pourrait, en effet, endommager le produit ou provoquer sa chute, entraînant des blessures. Samsung ne peut être tenue responsable de ce type d’accident. x Samsung ne peut être tenue responsable de tout dommage au produit ou toute blessure corporelle dans le cas de l’utilisation d’une fixation murale nonVESA ou non spécifiée, ou si l’utilisateur ne suit pas les instructions d’installation du produit. x Lors du montage, l’inclinaison du téléviseur ne doit pas dépasser 15 degrés. pouces Spéc. VESA (A * B) Vis standard Quantité 43~51 400 X 400 M8 4 60~64 600 X 400 N’installez pas votre kit de fixation murale lorsque le téléviseur est allumé. Vous risqueriez de vous électrocuter. Fixation du téléviseur au mur Attention: si vous tirez ou poussez le téléviseur ou si vous grimpez dessus, il risque de tomber. Veillez notamment à ce que vos enfants ne se suspendent pas au téléviseur, ni ne le déséquilibrent, car cela pourrait le faire basculer et occasionner des blessures graves, voire entraîner la mort. Respectez toutes les précautions de sécurité indiquées dans la brochure relative à la sécurité. Pour une stabilité accrue, installez le dispositif antichute comme indiqué ci-après. Pour éviter toute chute du téléviseur 1. Placez les vis dans les colliers et fixez-les fermement au mur. Assurez-vous que les vis ont été fermement fixées au mur. ✎En fonction du type de mur, il est possible que vous ayez besoin de matériel supplémentaire, tel que des chevilles. ✎Les colliers, vis et chaînettes n’étant pas fournis, vous devez les acheter séparément. 2. Retirez les vis situées sur la partie centrale arrière du téléviseur, placez-les dans les colliers, puis fixez-les à nouveau sur le téléviseur. ✎Il se peut que les vis ne soient pas fournies avec le produit. Dans ce cas, achetez des vis présentant les caractéristiques suivantes. 3. Reliez les colliers fixés au téléviseur et ceux fixés sur le mur à l’aide de chaînettes, puis attachez-les fermement. ✎REMARQUE • Placez le téléviseur à proximité du mur afin qu’il ne bascule pas vers l’arrière. • Il est recommandé de placer la chaînette de façon à ce que les colliers fixés au mur soient placés à la même hauteur ou plus bas que ceux fixés au téléviseur. • Détachez la chaînette avant de déplacer le téléviseur. 4. Vérifiez que toutes les connexions sont fixées correctement. Vérifiez régulièrement que les connexions ne présentent aucun signe d’usure. Si vous avez un doute quant à la sécurité des connexions, contactez un installateur professionnel. [PE530-XNZF]BN68-04068E.indb 10 2012-02-15 �� 1:44:47Français - Résolution des problèmes En cas de problème, consultez d’abord la liste des problèmes potentiels et des solutions. Si aucune de ces astuces de dépannage ne s’applique à votre problème, rendez-vous sur le site www.samsung.com, puis cliquez sur Assistance ou contactez le service clientèle de Samsung. Problèmes Le téléviseur ne s'allume pas. • Vérifiez que le cordon d'alimentation secteur est branché correctement sur la prise murale et sur le téléviseur. • Vérifiez que la prise murale est opérationnelle. • Essayez d'appuyer sur le bouton POWER du téléviseur pour vous assurer que le problème n'est pas dû à la télécommande. Si le téléviseur s'allume, reportez-vous au problème "La télécommande ne fonctionne pas" ci-après. Problèmes Aucune image/vidéo n'est affichée. • Vérifiez le raccordement des câbles (retirez tous les câbles connectés au téléviseur et aux appareils externes, puis rebranchezles). • Réglez les sorties vidéo de votre périphérique externe (décodeur câble/boîtier décodeur, DVD, Blu-ray, etc.) pour faire correspondre les connexions à l'entrée du téléviseur. Par exemple, si la sortie d'un périphérique externe est HDMI, vous devez établir une connexion avec une entrée HDMI du téléviseur. • Vérifiez que les appareils connectés sont sous tension. • Veillez à sélectionner la source appropriée du téléviseur en appuyant sur la touche SOURCE de la télécommande. • Redémarrez le périphérique connecté en rebranchant le câble d'alimentation du périphérique. Problèmes La télécommande ne fonctionne pas. • Vérifiez que la polarité (+/–) des piles de la télécommande est respectée. • Nettoyez la lentille de la télécommande. • Essayez de diriger directement la télécommande vers le téléviseur à une distance de 1,5 à 1,8 m. Problèmes La télécommande du décodeur câble /boîtier décodeur ne permet pas d'allumer ou d'éteindre le téléviseur, ni de régler le volume. • Programmez la télécommande du décodeur câble/boîtier décodeur de telle sorte qu'elle puisse commander le téléviseur. Consultez le mode d'emploi du décodeur câble/boîtier décodeur pour obtenir le code du téléviseur SAMSUNG. ✎Vous pouvez maintenir votre téléviseur dans des conditions optimales en le mettant à niveau avec le dernier micrologiciel (www. samsung.com → Assistance → Téléchargements) par le biais d'un périphérique USB. License Stockage et entretien ✎Si vous enlevez l'autocollant appliqué sur l'écran du téléviseur, éliminez les traces puis nettoyez le téléviseur. ✎Le nettoyage peut rayer le coffret et l’écran du produit. Veillez à les nettoyer avec précaution à l'aide du chiffon fourni ou d'un chiffon doux pour éviter les rayures. Ne projetez pas directement de l’eau sur l'appareil. Tout liquide qui entre dans le produit peut engendrer une défaillance, un incendie ou une électrocution. Nettoyez le produit à l'aide d'un chiffon doux imprégné d'une petite quantité d'eau. N'utilisez aucune substance inflammable (p. ex. benzène ou dissolvant) ni aucun agent nettoyant. [PE530-XNZF]BN68-04068E.indb 11 2012-02-15 �� 1:44:48Français - ���� Specifications Conditions ambiantes Température en service Humidité en fonctionnement Température de stockage Humidité sur le lieu de stockage 10°C 40°C 50°F 104°F -20°C 45°C -4°F 113°F à ( à ) 10% à 80%, sans condensation 10°C 40°C 50°F 104°F -20°C 45°C -4°F 113°F à ( à ) 5% à 95%, sans condensation Système TV Analogique : B/G, D/K, L, I (en fonction du pays sélectionné) Numérique: DVB-T/DVB-C Système de couleur/vidéo Analogique : PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60 Numérique: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0 Système Sonore BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC HDMI IN Vidéo: 1080 24p, 1080p, 1080i, 720p, 576p, 480p Audio: PCM linéaire sur deux voies 32/44.1/48kHz, 16/20/24bits. Nom du modèle PS51E530 PS60E530 Résolution de l’affichage 1920 X 1080 1920 X 1080 (Noir et blanc) Taille de l’écran 19 22 26 32 40 43 46 51 60pouces (128 cm)19 22 26 32 40 43 46 51 60 pouces (152 cm) Son (Sortie) 10W X 2 Dimensions (L x P x H) Corps Avec socle 1187,8 X 56,0 X 706,6 (mm) 1187,8 X 252,0 X 781,9 (mm) 1389,3 X 56,0 X 828,2 (mm) 1389,3 X 330,0 X 907,9 (mm) Poids Sans socle Avec socle 19,6 kg 22,1 kg 28,3 kg 32,6 kg ✎La conception et les spécifications peuvent être modifiées sans préavis. ✎Pour plus d’informations sur les caractéristiques d’alimentation et de consommation électrique, reportez-vous à l’étiquette fixée au produit. ✎La consommation électrique typique est mesurée selon la norme CEI 62087 Ed.2 BN68-03998E-FRA.indd 12 2012-02-27 �� 2:36:49Français - Formats vidéo pris en charge Extension de fichier Conteneur Codec vidéo Résolution Fréquence d'images (i/s) Débit binaire (Mbit/s) Codec audio *.avi *.mkv *.asf *.wmv *.mp4 *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.m2ts *.mts *.divx AVI MKV ASF MP4 3GP VRO VOB PS TS DivX 3.11/4.x/5.x/6.1 1920 x 1080 6~30 30 AC3 LPCM ADMPCM (IMA, MS) AAC HE-AAC WMA DD+ MPEG (MP3) DTS Core MPEG4 SP/ASP H.264 BP/MP/HP Motion JPEG 640 x 480 3 Window Media Video v9 MPEG2 1920 x 1080 30 MPEG1 Résolution complète disponible : 1920 X 1080 @ 60 Hz Mode Résolution Fréquence horizontale (kHz) Fréquence verticale (Hz) Fréquence d'horloge pixels (MHz) Polarité de synchronisation (H/V) IBM 640 x 350 31.469 70.086 25.175 +/- 720 x 400 31.469 70.087 28.322 -/+ MAC 640 x 480 35.000 66.667 30.240 -/- 832 x 624 49.726 74.551 57.284 -/- 1152 x 870 68.681 75.062 100.000 -/- VESA DMT 640 x 480 31.469 59.940 25.175 -/- 640 x 480 37.861 72.809 31.500 -/- 640 x 480 37.500 75.000 31.500 -/- 800 x 600 37.879 60.317 40.000 +/+ 800 x 600 48.077 72.188 50.000 +/+ 800 x 600 46.875 75.000 49.500 +/+ 1024 x 768 48.363 60.004 65.000 -/- 1024 x 768 56.476 70.069 75.000 -/- 1024 x 768 60.023 75.029 78.750 +/+ 1152 x 864 67.500 75.000 108.000 +/+ 1280 x 720 45.000 60.000 74.250 +/+ 1280 x 800 49.702 59.810 83.500 -/+ 1280 x 1024 63.981 60.020 108.000 +/+ 1280 x 1024 79.976 75.025 135.000 +/+ 1366 x 768 47.712 59.790 85.500 +/+ 1440 x 900 55.935 59.887 106.500 -/+ 1600 x 900RB 60.000 60.000 108.000 +/+ 1680 x 1050 65.290 59.954 146.250 -/+ 1920 x 1080 67.500 60.000 148.500 +/+ [PE530-XNZF]BN68-04068E.indb 13 2012-02-15 �� 1:44:51Deutsch - 2 Weitere Informationen zur Verwendung des e-Manuals (S. 9) Die Abbildungen und Illustrationen in diesem Handbuch dienen nur zur Information und können vom tatsächlichen Aussehen des Geräts abweichen. Änderungen an Ausführung und technischen Daten vorbehalten. Hinweis zu Digitalfernsehen 1. Die Funktionalitäten für Digitalfernsehen (DVB) stehen nur in Ländern/Regionen zur Verfügung, in denen digitale terrestrische DVB-T-Signale (MPEG2 und MPEG4 AVC) gesendet werden oder in denen Sie Zugang zu einem kompatiblen Kabelfernsehdienst mit DVB-C (MPEG2 und MPEG4 AAC) haben können. Fragen Sie Ihren örtlichen Händler, wenn Sie Informationen über die Verfügbarkeit von DVB-T oder DVB-C in Ihrer Gegend benötigen. 2. DVB-T ist der Standard des europäischen DVB-Konsortiums für die terrestrische Versorgung mit digitalem terrestrischem Fernsehen, und DVB-C ist das Konsortium für die Versorgung mit digitalem Kabelfernsehen. Allerdings werden manche Unterscheidungsmerkmale wie EPG (elektrische Programmzeitschrift), VOD (Video on Demand) usw. in dieser Spezifikation nicht berücksichtigt. Deshalb können sie zum jetzigen Zeitpunkt noch nicht eingesetzt werden. 3. Zwar hält dieses Fernsehgerät die aktuellen Standards der DVB-T- und DVB-C-Spezifikationen [Version August 2008] ein, aber es kann nicht garantiert werden, dass die Kompatibilität mit zukünftigen digitalen terrestrischen DVB-T und DBV-C-Signalen gewahrt bleibt. 4. In Abhängigkeit von den Ländern/Regionen, in denen dieses Fernsehgerät eingesetzt wird, verlangen manche Kabelfernsehanbieter zusätzliche Gebühren für solch einen Dienst, und möglicherweise wird verlangt, dass Sie den Vertragsbedingungen des Unternehmens zustimmen. 5. Manche Digitalfernsehfunktionen sind in einigen Ländern oder Regionen möglicherweise nicht verfügbar, und DVB-C-Signale kann das Gerät bei manchen Kabelfernsehanbietern möglicherweise nicht fehlerfrei verarbeiten. 6. Für weitere Informationen setzen Sie sich bitte mit dem Samsung-Kundendienstzentrum in Verbindung. ✎ Die Empfangsqualität des Fernsehgeräts kann durch Unterschiede bei den Sendeverfahren in verschiedenen Ländern beeinträchtigt werden. Kontrollieren Sie die Leistung des Fernsehgeräts bei Ihrem örtlichen SAMSUNG-Händler oder wenden Sie sich an das Samsung-Callcenter um festzustellen, ob sich die Empfangsqualität durch Ändern der Fernseheinstellungen verbessern lässt. Benutzerhinweise • Einbrennen von Standbildern Lassen Sie Standbilder (z. B. von einem Videospiel) auf dem Plasmabildschirm höchstens einige Minuten lang anzeigen, da das Bild anderenfalls einbrennen kann. Das Einbrennen von Standbildern wird auch als „Bildkonservierung“ bezeichnet. Sie können das Einbrennen vermeiden, indem Sie die Helligkeit und den Kontrast des Bildschirms beim Anzeigen von Standbildern verringern. • Wärmeentwicklung auf der Oberseite des Plasmafernsehgerät Die Oberseite des Produkts kann nach längerem Betrieb warm werden, da die Wärme aus dem Gerät über die Entlüftungsöffnung im oberen Teil des Geräts abgeführt wird. Dies ist normal und weist nicht auf einen Defekt oder eine Fehlfunktion des Geräts hin. Allerdings sollten Kinder von dem oberen Teil des Geräts ferngehalten werden. • Das Gerät verursacht ein „knackendes“ Geräusch. Ein „knackendes“ Geräusch entsteht, wenn das Gerätematerial sich aufgrund einer Änderung der Umgebung, wie z. B. Temperaturschwankungen oder Änderung der Luftfeuchtigkeit, zusammenzieht oder ausdehnt. Das ist normal und stellt keinen Defekt des Geräts dar. • Pixelfehler Der Plasmabildschirm, für dessen Herstellung hoch entwickelte Technologie eingesetzt wird, besitzt eine Bildfläche mit 2.360.000 (bei HD-Auflösung) bis 6.221.000 (bei Full-HD-Auflösung) Pixeln. Allerdings können ein paar zu helle oder zu dunkle Pixel auf der Bildfläche zu sehen sein. Diese Pixelfehler haben keinen Einfluss auf die Geräteleistung. • Vermeiden Sie den Betrieb des Plasmabildschirms bei Temperaturen unter 5° C. • Ein Standbild, dass zu lange angezeigt wird, kann zu einer bleibenden Beschädigung des Plasmabildschirms führen. Der Betrieb des Plasmafernsehgeräts im Format 4:3 für einen längeren Zeitraum kann links, rechts und in der Mitte des Bildschirms Spuren der Bildränder hinterlassen, die durch die unterschiedliche Lichtemission auf dem Bildschirm verursacht werden. Durch die Wiedergabe einer DVD oder den Betrieb einer Spielkonsole kann es auf dem Bildschirm zu ähnlichen Effekten kommen. Schäden, die durch die o. g. Effekte verursacht wurden, fallen nicht unter die Garantie. • Nachbilder auf dem Bildschirm. Durch das Anzeigen der Standbilder von Videospielen oder vom PC über einen gewissen Zeitraum können partielle Nachbilder entstehen. Um diesen Effekt zu verhindern, verringern Sie die „Helligkeit“ und den „Kontrast“, wenn Sie Standbilder über einen längeren Zeitraum anzeigen möchten. • Gewährleistung Durch diese Garantie nicht abgedeckt sind Schäden, die durch das Einbrennen von Bildern entstehen. Das Einbrennen von Bildern wird von der Garantie nicht abgedeckt. Ordnungsgemäße Entsorgung dieses Geräts (Elektro- und Elektronik-Altgeräte) (Anwendbar in der Europäischen Union und anderen europäischen Staaten mit Systemen zur getrennten Sammlung von Wertstoffen) Diese Kennzeichnung auf dem Gerät, dem Zubehör oder der Dokumentation bedeutet, dass das Gerät sowie das elektronische Zubehör (z. B. Ladegerät, Headset, USB-Kabel) am Ende ihrer Lebensdauer nicht im normalen Hausmüll entsorgt werden dürfen. Entsorgen Sie diese Geräte bitte getrennt von anderen Abfällen, um der Umwelt bzw. der menschlichen Gesundheit nicht durch unkontrollierte Müllbeseitigung zu schaden. Recyceln Sie das Gerät, um die nachhaltige Wiederverwertung von stofflichen Ressourcen zu fördern. Private Nutzer sollten den Händler, bei dem das Produkt gekauft wurde, oder die zuständigen Behörden kontaktieren, um in Erfahrung zu bringen, wie sie das Gerät auf umweltfreundliche Weise recyceln können. Gewerbliche Benutzer wenden sich an ihren Lieferanten und überprüfen die Konditionen Ihres Kaufvertrags. Dieses Gerät und seine elektronischen Zubehörteile dürfen nicht zusammen mit anderem Gewerbemüll entsorgt werden. Ordnungsgemäße Entsorgung der Batterien dieses Produkts (Anzuwenden in den Ländern der Europäischen Union und anderen europäischen Ländern mit einem separaten Sammelsystem für Batterien) Diese Kennzeichnung auf der Batterie, dem Handbuch oder der Verpackung bedeutet, dass die Batterie am Ende ihrer Lebensdauer nicht im normalen Hausmüll entsorgt werden darf. Die Kennzeichnung mit den chemischen Symbolen für Hg, Cd oder Pb bedeutet, dass die Batterie Quecksilber, Cadmium oder Blei in Mengen enthält, die die Grenzwerte der EU-Direktive 2006/66 übersteigen. Wenn Batterien nicht ordnungsgemäß entsorgt werden, können diese Substanzen die Gesundheit von Menschen oder die Umwelt gefährden. Zum Schutz der natürlichen Ressourcen und zur Förderung der Wiederverwertung von Materialien trennen Sie die Batterien von anderem Müll und führen Sie sie Ihrem örtlichen Recyclingsystem zu. [PE530-XNZF]BN68-04068E.indb 2 2012-02-15 �� 1:44:51Deutsch - 3 Zubehör ✎Vergewissern Sie sich, dass im Lieferumfang des Fernsehgeräts folgende Komponenten enthalten sind. Falls irgendwelche Teile fehlen sollten, setzen Sie sich bitte mit Ihrem Händler in Verbindung. ✎Die Farbe und die Form der Teile können sich je nach Modell unterscheiden. ✎Kabel, die nicht zum Paketinhalt gehören, können gesondert erworben werden. • Fernbedienung und 2 Batterien (Typ AAA) • Netzkabel • Bedienungsanleitung • Reinigungstuch • Garantiekarte / Sicherheitshinweise (nicht überall verfügbar) Ferritkern (1 Stk.) ✎Ferritkern für Netzkabel: Mit dem Ferritkern werden die Kabel vor Störungen geschützt. Wenn Sie ein Kabel anschließen, öffnen Sie den Ferritkern und legen Sie ihn in der Nähe des Steckers mit einem deutlich hörbaren Klicken um das Kabel (siehe Abbildung). x A Höchstabstand zwischen dem Ferritkern und dem anderen Ende des Kabels, das in das Fernsehgerät eingesteckt wird: 3/4 Zoll (2 cm) A B Netzkabel ✎Verwaltungskosten werden abgerechnet, wenn: (a) auf Ihren Wunsch ein Techniker gerufen wird und kein Defekt des Geräts vorliegt (d.h. wenn Sie dieses Benutzerhandbuch nicht gelesen haben). (b) Sie das Gerät in eine Reparaturwerkstatt bringen und kein Defekt des Geräts vorliegt (d.h. wenn Sie dieses Benutzerhandbuch nicht gelesen haben). ✎Der abgerechnete Betrag wird Ihnen mitgeteilt, ehe irgendwelche Arbeiten oder Kundenbesuche ausgeführt werden. [PE530-XNZF]BN68-04068E.indb 3 2012-02-15 �� 1:44:52Deutsch - 4 Verwenden der Bedieneinheit des Fernsehers (Tasten) Der TV-Steuerknopf verfügt über einen Knopf, den Sie in alle Richtungen bewegen können, und der die Navigation auch ohne Fernbedienung ermöglicht. ✎Manche Funktionen, für die Sie eine PIN eingeben müssen, stehen möglicherweise nicht zur Verfügung. ✎Form und Farbe des Geräts können sich je nach Modell unterscheiden. ✎Wenn Sie den Steuerknopf länger als 1 Sekunde gedrückt halten, wird das Menü geschlossen. ✎Achten Sie beim Auswählen der Funktion durch Bewegen des Steuerknopf nach oben/unten/links/ rechts darauf, dass Sie den Steuerknopf nicht nach unten drücken. Wenn Sie ihn zuerst nach unten drücken, können Sie ihn nicht mehr nach oben/ unten/link/rechts bewegen. Funktionsmenü Zurück Fernbedienungssensor TV-Steuerknopf Ab (Vorn) Auf (Hinten) Links Rechts Einschalten Wenn sich das Fernsehgerät im Standbymodus befindet, können Sie es durch Drücken des Steuerknopfes einschalten. Einstellen der Lautstärke Wenn das Fernsehgerät eingeschaltet ist, können Sie die Lautstärke durch Bewegen des Steuerknopfes nach links oder rechts einstellen. Auswählen eines Senders Wenn das Fernsehgerät eingeschaltet ist, können Sie einen Sender durch Bewegen des Steuerknopfes nach oben oder unten auswählen. Verwenden des Funktionsmenüs Zum Anzeigen des Funktionsmenüs drücken Sie bei eingeschaltetem Fernsehgerät den Steuerknopf. Beim nochmaligem Drücken wird das Fenster des Funktionsmenüs geschlossen. Verwenden des Menüs Zum Auswählen von MENÜ(m) bewegen Sie innerhalb des Funktionsmenüs den Steuerknopf. Das Bildschirmmenü (OSD) der jeweiligen Funktion Ihres Fernsehgeräts wird angezeigt. Auswählen der Signalquelle Zum Auswählen der Quelle( ) bewegen Sie innerhalb des Funktionsmenüs den Steuerknopf. Die Liste der verfügbaren Quellen wird angezeigt. Auswählen der Startseite Inhalt Zum Auswählen der Startseite Inhalt( ) bewegen Sie innerhalb des Funktionsmenüs den Steuerknopf. Das Fenster Startseite Inhalt wird angezeigt. Ausschalten Zum Ausschalten(P) des Fernsehgeräts bewegen Sie innerhalb des Funktionsmenüs den Steuerknopf. Standby-Modus Der Standby-Modus ist nicht für längere Phasen der Abwesenheit gedacht (z. B. wenn Sie verreist sind). Eine kleine Menge Strom wird auch dann noch verbraucht, wenn das Gerät mit dem Netzschalter ausgeschaltet wurde. Es ist am besten, das Netzkabel aus der Steckdose zu ziehen. Absichern des Aufstellbereichs Halten Sie die erforderlichen Abstände zwischen dem Gerät und anderen Objekten (z.B. Wänden) ein, um eine ausreichende Lüftung sicherzustellen. Wenn Sie dies nicht tun, besteht die Gefahr, dass aufgrund eines Anstiegs der Temperatur im Innern des Geräts ein Brand ausbricht oder andere Probleme mit dem Gerät auftreten. ✎Wenn Sie einen Standfuß oder eine Wandhalterung einsetzen, verwenden Sie ausschließlich Teile von Samsung Electronics. x Wenn Sie Teile eines anderen Herstellers verwenden, kann es zu Problemen mit dem Gerät oder zu Verletzungen kommen, weil das Gerät herunterfällt. ✎Das Aussehen kann sich je nach Gerät unterscheiden. ✎Gehen Sie beim Anschließen des Fernsehgeräts vorsichtig vor, da einige Teile warm werden können. Aufstellen des Geräts mit dem Standfuß Installation des Geräts mit der Wandhalterung 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm [PE530-XNZF]BN68-04068E.indb 4 2012-02-15 �� 1:44:53Deutsch - 5 Fernbedienung ✎Dies ist eine spezielle Fernbedienung für Personen mit eingeschränktem Sehvermögen. Die Netztaste sowie die Tasten zum Einstellen des Senders und der Lautstärke sind in Braille beschriftet. A B C D E-MANUAL P.SIZE AD/SUBT. CONTENT Einlegen von Batterien (Batteriegröße: AAA) Ein- und Ausschalten des Fernsehgeräts. Anzeigen und Auswählen der verfügbaren Videosignalquellen. Zurück zum vorherigen Sender. Drücken Sie diese Taste, um den Ton vorübergehend auszuschalten. Wechseln des Senders. Anzeigen der Senderlisten auf dem Bildschirm. Anzeigen des elektronischen Programmführers. Anzeigen von Informationen auf dem Bildschirm. Schließen des Menüs. Hiermit wechseln Sie direkt zu einem Kanal. Einstellen der Lautstärke. Alternativ wählen Sie „Videotext ein“, „Doppel“, „Mix“ oder „Aus“. Anzeigen des Bildschirmmenüs. Hiermit können Sie häufig verwendete Funktionen schnell auswählen. Anzeigen der Startseite Inhalt. Zurück zum vorherigen Menü. Auswählen von Optionen im Bildschirmmenü und Ändern von Menüwerten. Verwenden Sie diese Tasten entsprechend den Anweisungen auf dem Bildschirm. Verwenden Sie diese Tasten innerhalb einer bestimmten Funktion. Einzelheiten entnehmen Sie dem e-Manual. E-MANUAL: Anzeigen des e-Manuals. (S. 9) P.SIZE: Hiermit wählen Sie das Bildformat. AD/SUBT.: Auswahl von Audio für Sehgeschädigte. (nicht überall verfügbar). / Digitale Untertitel anzeigen ✎Batterien und Akkus gehören nicht in den Hausmüll. Als Verbraucher sind Sie verpflichtet, alte Batterien und Akkus zur umweltschonenden Entsorgung zurückzugeben. Sie können alte Batterien und Akkus bei den öffentlichen Sammelstellen in Ihrer Gemeinde oder überall dort abgeben, wo Batterien und Akkus der betreffenden Art verkauft werden. [PE530-XNZF]BN68-04068E.indb 5 2012-02-15 �� 1:44:54Deutsch - 6 Startkonfiguration Wenn das Fernsehgerät erstmals eingeschaltet wird, helfen eine Reihe aufeinander folgender Abfragen beim Durchführen der Grundeinstellungen. Drücken Sie die POWERP. Einstell. ist nur dann verfügbar, wenn die Quelle auf TV eingestellt ist. 1. Menüsprache : Auswählen der Menüsprache Drücken Sie die Taste ▲ oder ▼, und drücken Sie dann die Taste ENTERE. Wählen Sie die gewünschte Sprache des Bildschirmmenüs (OSD) aus. 2. Modusauswahl : Auswählen des Modus Shop-Demo oder Privatgebrauch Drücken Sie die Taste ▲ oder ▼, und drücken Sie dann die Taste ENTERE. Wählen Sie den Modus Privatgebrauch aus. Der Modus Shop-Demo ist für den Betrieb in Einzelhandelsgeschäften bestimmt. ✎Wenn Sie den TV-Steuerknopf drücken, wird das Fenster des Funktionsmenüs angezeigt. Wählen Sie MENÜ(m), und halten Sie den Steuerknopf länger als 5 Sekunden gedrückt. Der Modus Shop-Demo ist eingestellt. ✎Sie können den Modus Shop-Demo deaktivieren, indem Sie Quelle( ) auswählen, und den Steuerknopf länger als 5 Sekunden gedrückt halten. ✎Shop-Demo ist ausschließlich für den Betrieb in Geschäften bestimmt. Wenn Sie diese Option dennoch auswählen, stehen einige Funktionen nicht zur Verfügung. Wählen Sie den Modus Privatgebrauch, wenn Sie zu Hause fernsehen möchten. 3. Land (je nach Land): Auswählen eines Landes Drücken Sie die Taste ▲ oder ▼, und drücken Sie dann die Taste ENTERE. Wählen Sie das gewünschte Land aus. ✎Nachdem Sie im Menü „Land“ das Land eingestellt haben, werden Sie bei manchen Modellen aufgefordert, die PIN-Nummer einzurichten. 4. Autom. Sendersuchlauf (Schritt 1): Wählen Sie aus, wie Sie fernsehen möchten. Sendereinstellung: Ist es erforderlich, am Fernsehgerät Sender zu suchen und einzustellen? • Ja, Sendersuchl. ausführen: Hiermit wird über ein HF-Kabel nach verfügbaren Sendern gesucht. • Nein, nicht erforderlich: Sie können auch ohne den automatischen Sendersuchlauf nach Sendern suchen. 5. Autom. Sendersuchlauf (Schritt 2): Auswahl der Suchoptionen Wählen Sie das gewünschte Sendesignal sowie den Antennentyp aus. Drücken Sie zuerst die Taste ▲/▼/◄/►, und drücken Sie dann die Taste ENTERE. Wenn Sie den Antennentyp auf Kabel einstellen, können Sie den Sendern im nächsten Schritt einen Zahlenwert (Senderfrequenzen) zuweisen. Weitere Informationen hierzu finden Sie unter Sender → Autom. Sendersuchlauf. ✎Zum Unterbrechen des Speichervorgangs drücken Sie zu einem beliebigen Zeitpunkt die Taste ENTERE. ✎Siehe e-Manual Kapitel “Sender neu einstellen > Autom. Sendersuchlauf” 6. Uhr: Einstellen des Uhrmodus • Auto: Hiermit wird die aktuelle Uhrzeit automatisch eingestellt. • Manuell: Hiermit können Sie das Datum und die Uhrzeit manuell einstellen. 7. Einstellung abschließen Drücken Sie die Taste ENTERE. ✎Alle vorgenommenen Einstellungen werden angezeigt. So setzen Sie diese Funktion zurück: Sie sollten das Verfahren unter Einstell. (MENU → System) zu Hause erneut durchführen, auch wenn Sie es bereits im Geschäft durchgeführt haben. Wählen Sie System - Einstell. (Startkonfiguration). Geben Sie Ihre 4-stellige PIN ein. Die Standard-PIN lautet „0-0-0-0“ (außer Frankreich). Wenn Sie die PIN ändern möchten, verwenden Sie die Funktion PIN ändern. ✎Wenn Sie den PIN-Code vergessen haben, drücken Sie im Standbymodus die Fernbedienungstasten in der angegebenen Reihenfolge, um die PIN auf „0-0-0-0“ zurückzusetzen (Frankreich: “1-1-1-1”): POWER (Aus) → MUTE → 8 → 2 → 4 → POWER (Ein). [PE530-XNZF]BN68-04068E.indb 6 2012-02-15 �� 1:44:54Deutsch - 7 Anschlüsse HDMI IN 2 HDMI IN 1 (DVI) COMPONENT / AV IN SERVICE VIDEO AUDIO ANT IN EXT (RGB) DIGITAL AUDIO OUT (OPTICAL) (5V 0.5A) OPTICAL EXT AUDIO OUT R-AUDIO-L PR PB Y AUDIO OUT COMPONENT OUT R-AUDIO-L VIDEO OUT R B R B GR R W R Y Y W R W R W R G AUDIO OUT DVI OUT HDMI OUT R-AUDIO-L PC R W VHF/UHF-Antenne Kabel USB oder Rückseite des Fernsehgeräts Seitenverkleidung des Fernsehgeräts BD-Player / PC HDMI, HDMI/DVI-Anschluss Audio-Anschluss SCART-Anschluss Kopfhörer-Anschluss BD-Player Komponentenanschluss BD-Player AV-Anschluss ✎Die Lage des Anschlusses kann sich je nach Modell unterscheiden. ✎Das Plasmagerät kann Störungen im Amateurfunk- oder Mittelwellenband verursachen. ✎Wenn Sie ein Mobiltelefon mit Zweiwegradio oder Mobilgeräte, die das Amateurfunk- und Mittelwellenband nutzen, in der Nähe des Fernsehgeräts verwenden, kann dies zu Störungen am Fernseher führen. ✎Unterstützt werden sowohl Komponenten- und AV-Verbindungen in einem Anschluss. Videorekorder oder DVD [PE530-XNZF]BN68-04068E.indb 7 2012-02-15 �� 1:44:55Deutsch - 8 SERVICE SERVICE Anschluss nur für Servicezwecke. ✎HINWEIS • Bei Anschluss über ein HDMI/DVI-Kabel müssen Sie den HDMI IN 1(DVI)-Anschluss verwenden. • Das Zeilensprungverfahren wird nicht unterstützt. • Das Fernsehgerät funktioniert möglicherweise nicht ordnungsgemäß, wenn kein Standardmodus ausgewählt wird. • Separate- und Composite-Modus werden unterstützt. SOG (Sync On Green) wird nicht unterstützt. • Der PC(D-Sub)-Eingang wird nicht unterstützt. • Der Anschluss über ein HDMI-Kabel wird je nach PC möglicherweise nicht unterstützt. • Die Kopfhörerbuchse unterstützt ausschließlich dreiadrige Klinkenstecker (TRS). Herstellen einer Verbindung mit dem COMMON INTERFACE-Steckplatz (Steckplatz für Ihre PayTV-Karte) Um Bezahlsender zu sehen, müssen Sie eine „CI“ oder „CI+“-Karte einsetzen. • Wenn Sie keine „CI“ oder „CI+“-Karte einsetzen, wird bei einigen Kanälen die Meldung „Gestörtes Signal“ angezeigt. • Die Verbindungsinformationen mit Telefonnummer, Kennung der „CI“- oder „CI+“-Karten und Hostkennung sowie anderen Angaben werden nach ungefähr 2 bis 3 Minuten angezeigt. Wenn eine Fehlermeldung angezeigt wird, wenden Sie sich bitte an Ihren Dienstanbieter. • Wenn das Konfigurieren der Kanalinformationen abgeschlossen ist, wird die Meldung „Udating Completed“ (Aktualisierung abgeschlossen) angezeigt. Dies bedeutet, dass die Kanalliste aktualisiert ist. Seitenverkleidung des Fernsehgeräts y Das Bild kann je nach Modell unterschiedlich sein. Ändern der Eingangsquelle Quelle TV / Ext. / HDMI1/DVI / HDMI2 / AV / Component Hiermit wählen Sie, ob das Fernsehgerät mit einem Fernsehsignal versorgt wird oder an andere externe Signaleingänge wie z. B. DVD- / Blu-Ray-Player / Kabelreceiver / Satellitenreceiver (Set-Top Box) angeschlossen ist. ✎In der angezeigten Liste der Quelle werden die angeschlossenen Signalquellen hervorgehoben. ✎Der PC(D-Sub)-Eingang wird nicht unterstützt. Wenn Sie den PC an das Fernsehgerät anschließen möchten, verwenden Sie dafrü den HDMI1/DVI-Eingang. ✎Ext. bleibt immer aktiviert. ✎Drücken Sie die Taste TOOLS. • Name bearb. Sie können für eine externe Eingangsquelle einen beliebigen Namen festlegen. – Wenn Sie einen PC über ein HDMI-Kabel mit dem HDMI IN 1(DVI)-Anschluss verbinden, müssen Sie unter Name bearb. den PC-Modus des Fernsehgeräts aktivieren. – Wenn Sie einen PC über ein HDMI/DVI-Kabel mit dem HDMI IN 1(DVI)-Anschluss verbinden, müssen Sie unter Name bearb. den DVI PC-Modus des Fernsehgeräts aktivieren. – Wenn Sie ein AV-Gerät über ein HDMI/DVI-Kabel mit dem HDMI IN 1(DVI)-Anschluss verbinden, müssen Sie unter Name bearb. den DVI-Geräte-Modus des Fernsehgeräts aktivieren. • Information Sie können detaillierte Informationen zum angeschlossenen externen Gerät anzeigen. Anzeigemodi (HDMI/DVI-Eingang) Die optimale Auflösung beträgt 1920 x 1080 bei 60Hz. Informationen zur höchsten verfügbaren Auflösung finden Sie auf der Seite mit den technischen Daten. [PE530-XNZF]BN68-04068E.indb 8 2012-02-15 �� 1:44:57Deutsch - 9 So zeigen Sie das e-Manual an E-MANUAL Die Anweisungen zu den Funktionen Ihres Fernsehgeräts finden Sie im e-Manual. Drücken Sie dazu die Taste E-MANUAL auf Ihrer Fernbedienung. Bewegen Sie den Cursor mithilfe der Pfeiltasten, um eine Kategorie und ein Thema auszuwählen, und drücken Sie dann die Taste ENTERE. Die gewünschte e-Manual-Seite wird angezeigt. Sie können auch über das entsprechende Menü darauf zugreifen: O MENUm→ Unterstützung → e-Manual → ENTERE ✎Drücken Sie die Taste E-MANUAL, um zum Hauptmenü des e-Manual zurückzukehren. Bildschirmanzeige Bedientasten } Index: Anzeigen des Index-Fensters. E Eingabe: Wählen Sie eine Kategorie oder ein Untermenü. e Beenden: Schließen des e-Manual. a Jetzt test.: Anzeigen des zum Thema passenden Bildschirmmenüs. Drücken Sie die Taste E-MANUAL, um zum Fenster des e-Manuals zurückzukehren. b Start: Wechseln zum Startfenster des e-Manuals. L Seite: Wechseln zur vorherigen oder zur nächsten Seite. { Zoom: Vergrößern des Fensters. – Wählen Sie Zoom, und drücken Sie dann die Taste ENTERE, um das Fenster zu vergrößern. Mit der Taste ▲ oder ▼ können Sie durch das vergrößerte Fenster blättern. Drücken Sie die Taste RETURN, um das Fenster auf die normale Größe zurückzusetzen. Grundfunktionen Ändern des voreingestellten Bildmodus Anpassen der Bildeinstellungen Ändern der Bildoptionen Ändern des Tonmodus Anpassen der Toneinstellungen } Index E Eingabe e Beenden Aktuell angezeigtes Video, Fernsehprogramm usw. Die Kategorieliste. Drücken Sie die Taste ◄ oder ►, um die gewünschte Kategorie auszuwählen. Anzeigen der Untermenüliste. Bewegen Sie den Cursor mithilfe der Pfeiltasten auf Ihrer Fernbedienung. Drücken Sie die Taste ENTERE, um das gewünschte Untermenü auszuwählen. So wechseln Sie zwischen den e-Manual-Themen und den entsprechenden Bildschirmmenüs. ✎Diese Funktion ist in manchen Menüs nicht verfügbar. ✎Wenn das Menü deaktiviert ist, können Sie die Funktion Jetzt test. nicht verwenden. Methode 1 Methode 2 1. Wenn Sie das entsprechende Menü zu einem Thema im e-Manual ausführen möchten, drücken Sie die rote Taste, um Jetzt test. auszuwählen. 2. Drücken Sie die Taste E-MANUAL, um zum Fenster des e-Manual zurückzukehren. 1. Drücken Sie die Taste ENTERE, wenn ein Thema angezeigt wird. “Möchten Sie dies ausführen?” wird angezeigt. Wählen Sie Ja, und drücken Sie dann die Taste ENTERE. Das Fenster des Bildschirmmenüs wird angezeigt. 2. Drücken Sie die Taste E-MANUAL, um zum Fenster des e-Manual zurückzukehren. So suchen Sie auf der Indexseite nach einem Thema ✎Diese Funktion wird, je nach Sprache, möglicherweise nicht unterstützt. 1. Wenn Sie nach einem Stichwort suchen möchten, wählen Sie mit der blauen Taste Index. 2. Drücken Sie die Taste ◄ oder ►, um die gewünschte Zeichenfolge auszuwählen. 3. Wählen Sie mit der Taste ▲ oder ▼ das gewünschte Stichwort aus, und drücken Sie dann die Taste ENTERE. 4. Sie können das Fenster der entsprechenden Anweisung im e-Manual anzeigen. ✎Drücken Sie die Taste RETURN, um das Index-Fenster zu schließen. [PE530-XNZF]BN68-04068E.indb 9 2012-02-15 �� 1:44:58Deutsch - Anbringen der Wandhalterung Mit der (separat erhältlichen) Wandhalterung können Sie das Fernsehgerät an einer Wand befestigen. Detaillierte Informationen zum Montieren der Wandhalterung finden Sie in den Anweisungen, die im Lieferumfang der Wandhalterung enthalten sind. Lassen Sie sich beim Anbringen der Wandhalterung von einem Techniker helfen. Wir raten Ihnen davon ab, dies selbst zu tun. Samsung Electronics haftet nicht für Schäden an Gerät oder Personen, wenn die Montage vom Kunden selbst durchgeführt wird. Spezifikation (VESA) der Wandhalterung ✎Die Wandhalterung wird nicht mitgeliefert, ist aber gesondert erhältlich. Montieren Sie die Wandhalterung an einer soliden Wand, die senkrecht zum Boden steht. Bei Installation auf anderen Trägermaterialien wenden Sie sich bitte an Ihren Fachhändler. Bei Montage an einer Decke oder schrägen Wand kann das Fernsehgerät herunterfallen und zu Verletzungen führen. ✎HINWEIS x Die Standardabmessungen der Wandhalterung finden Sie in der nachfolgenden Tabelle. x Beim Kauf unserer Wandhalterung erhalten Sie ein detailliertes Installationshandbuch sowie alle für die Montage erforderlichen Teile. x Verwenden Sie keine Schrauben, die nicht der VESAStandardspezifikation für Schrauben entsprechen. x Verwenden Sie keine Schrauben, die länger sind als hier angegeben, da damit innen liegende Bauteile des Fernsehers beschädigt werden können. x Bei Wandhalterungen, die nicht der VESAStandardspezifikation für Schrauben entsprechen, kann die Länge der Schrauben je nach Spezifikation unterschiedlich sein. x Ziehen Sie die Schrauben nicht zu fest an, weil Sie so möglicherweise das Gerät beschädigen, oder es dadurch herunterfallen und Verletzungen verursachen könnte. Samsung haftet nicht bei derartigen Unfällen. x Samsung haftet nicht für Geräteschäden oder Verletzungen, wenn eine Wandhalterung verwendet wird, die nicht dem VESA-Standard entspricht oder nicht spezifiziert ist, oder wenn der Verbraucher die Installationsanleitung für das Produkt nicht befolgt. x Bei der Montage dieses Fernsehgeräts darf eine Neigung von 15 Grad nicht überschritten werden. Zoll VESASpezifikation (A * B) Standardschraube Menge 43~51 400 X 400 M8 4 60~64 600 X 400 Installieren Sie die Wandhalterung nicht bei eingeschaltetem Fernsehgerät. Sie konnten dabei einen Stromschlag erhalten und sich verletzen. Befestigen des Fernsehgeräts an der Wand Achtung: Das Fernsehgerät kann hinfallen, wenn Sie daran ziehen, es schieben oder darauf klettern. Sie insbesondere sicher, dass sich keine Kinder an das Gerät hängen oder es aus dem Gleichgewicht bringen. Anderenfalls könnte das Gerät umkippen und zu schweren Verletzungen oder dem Tod führen. Beachten Sie alle Anweisungen der beigefügten Sicherheitshinweise. Noch mehr Stabilität erreichen Sie, wenn Sie den Kippschutz installieren. Gehen Sie hierzu folgendermaßen vor. So verhindern Sie, dass das Fernsehgerät umkippt 1. Stecken Sie die Schrauben durch die Halterungen und befestigen Sie sie fest an der Wand. Stecken Sie die Schrauben durch die Halterungen und befestigen Sie sie fest an der Wand. ✎Je nach Ausführung der Wand benötigen Sie zum Befestigen weiteres Material, wie z. B. Dübel. ✎Da die benötigten Halterungen, Schrauben und das Band nicht zum Lieferumfang gehören, müssen Sie diese Teile gesondert erwerben. 2. Entfernen Sie die Schrauben in der Mitte der Geräterückseite. Setzen Sie die Schrauben in die Halterungen ein und befestigen Sie die Schrauben dann wieder am Fernsehgerät. ✎Die Schrauben werden möglicherweise nicht zusammen mit dem Gerät geliefert. Kaufen Sie in diesem Fall Schrauben entsprechend den folgenden Angaben. 3. Verbinden Sie die Halterungen an der Wand und die Halterungen am Fernsehgerät mit einem festen Band und ziehen Sie das Band dann fest. ✎HINWEIS • Stellen Sie das Fernsehgerät in der Nähe der Wand auf, damit es nicht nach hinten kippen kann. • Es ist noch sicherer, wenn die Halterungen an der Wand niedriger als die Halterungen am Fernsehgerät sind. • Lösen Sie das Band, ehe Sie den Fernseher bewegen. 4. Kontrollieren Sie, ob alle Befestigungen ordnungsgemäß gesichert sind. Prüfen Sie regelmäßig die Verbindungen auf Zeichen von Ermüdung oder Versagen. Bei Zweifeln hinsichtlich der Sicherheit Ihrer Halterungen wenden Sie sich an einen professionellen Installationsbetrieb. [PE530-XNZF]BN68-04068E.indb 10 2012-02-15 �� 1:44:58Deutsch - Fehlerbehebung Wenn das Fernsehgerät scheinbar ein Problem aufweist, schlagen Sie zunächst in dieser Liste der möglichen Probleme und Lösungen nach. Wenn keiner dieser Tipps zur Fehlerbehebung weiterhilft, öffnen Sie die Website www.samsung.com und klicken Sie dort auf „Support“ oder wenden Sie sich an ein Samsung-Kundendienstcenter. Probleme Der Fernseher kann nicht eingeschaltet werden. • Vergewissern Sie sich, dass das Netzkabel sicher mit der Wandsteckdose und dem Fernsehgerät verbunden ist. • Vergewissern Sie sich, dass die Netzsteckdose Strom liefert. • Drücken Sie die POWER am Fernsehgerät, um zu prüfen, ob die Fernbedienung richtig funktioniert. Wenn das Fernsehgerät eingeschaltet wird, lesen Sie den Abschnitt „Die Fernbedienung funktioniert nicht“ weiter unten. Probleme Kein Bild/Video. • Überprüfen Sie die Kabelverbindungen. Unterbrechen Sie kurzzeitig alle Kabelverbindungen zwischen dem Fernsehgerät und den externen Geräten. • Stellen Sie die Videoausgänge Ihres externen Geräts (Kabel-/Satellitenreceiver, DVD-/Blu-ray-Player) so ein, dass sie zu den Verbindungen mit dem Fernsehgerät passen. Zum Beispiel: Wenn der HDMI-Ausgang des externen Geräts verwendet wird, schließen Sie es an den HDMI-Eingangs Ihres Fernsehers an. • Stellen Sie sicher, dass die angeschlossenen Geräte eingeschaltet sind. • Vergewissern Sie sich, dass die richtige Signalquelle für den Fernseher eingestellt ist. Drücken Sie dazu die Taste SOURCE auf der Fernbedienung. • Schließen Sie das Netzkabel an, um das angeschlossene Gerät neu zu starten. Probleme Die Fernbedienung funktioniert nicht. • Ersetzen Sie die Batterien der Fernbedienung, und achten Sie dabei auf die richtige Polung (+/-). • Reinigen Sie das Sendefenster der Fernbedienung. • Versuchen Sie, die Fernbedienung von 1,5 bis 1,8 Meter Entfernung aus direkt auf das TV-Gerät zu richten. Probleme Die Fernbedienung des Kabel-/Satellitenreceivers schaltet das Fernsehgerät nicht ein/aus oder regelt auch nicht die Lautstärke. • Programmieren Sie die Fernbedienung des Kabel-/Satellitenreceivers so, dass sie das Fernsehgerät anspricht. Den Code für SAMSUNG TV finden Sie in der Bedienungsanleitung für Ihren Kabel-/Satellitenreceiver. ✎Sie können den optimalen Zustand Ihres Fernsehgeräts erhalten, indem Sie die aktuelle Firmware per USB von der Website (www.samsung.com → Support → Download Center) herunterladen. Lizenz Lagerung und Wartung ✎Wenn Sie den Aufkleber vom Bildschirm abnehmen, entfernen Sie die Kleberückstände, ehe Sie fernsehen. ✎Beim Reinigen können Kratzer auf dem Gehäuse und dem Bildschirm des Produkts entstehen. Wischen Sie das Gehäuse und den Bildschirm vorsichtig mit dem im Lieferumfang enthaltenen Tuch oder einem anderen weichen Tuch ab, um Kratzer zu vermeiden. Sprühen Sie kein Wasser direkt auf das Gerät. Jede Flüssigkeit, die in das Gerät eindringt, kann zu einer Funktionsstörung, einem Brand oder einem Stromschlag führen. Reinigen Sie das Gerät mit einem weichen Tuch, das Sie vorher mit einer kleinen Menge Wasser anfeuchten. Verwenden Sie keine entzündlichen Flüssigkeiten (z. B. Benzol, Verdünner) oder ein Reinigungsmittel. [PE530-XNZF]BN68-04068E.indb 11 2012-02-15 �� 1:44:59Deutsch - ���� Technische Daten Umgebungsbedingungen Betriebstemperatur Luftfeuchtigkeit (bei Betrieb) Temperatur (Lagerung) Luftfeuchtigkeit (Lagerung) 10°C 40°C 50°F 104°F -20°C 45°C -4°F 113°F bis ( bis ) 10% bis 80%, nicht kondensierend 10°C 40°C 50°F 104°F -20°C 45°C -4°F 113°F bis ( bis ) 5% bis 95%, nicht kondensierend TV-System Analog: B/G, D/K, L, I (je nach eingestelltem Land) Digital: DVB-T/DVB-C Fernsehnorm/Videosystem Analog: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60 Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0 Audiosystem BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC HDMI IN Video: 1080 24p, 1080p, 1080i, 720p, 576p, 480p Audio: 2-Kanal-Linear-PCM 32/44.1/48 kHz, 16/20/24 Bit. Modellname PS51E530 PS60E530 Anzeigeauflösung 1920 X 1080 1920 X 1080 (Schwarzweiß) Bildschirmgröße 19 22 26 32 40 43 46 51 60Zoll (128 cm) 19 22 26 32 40 43 46 51 60 Zoll (152 cm) Audio (Ausgang) 10W X 2 Abmessungen (BxTxH) Gehäuse Mit Fuß 1187,8 X 56,0 X 706,6 (mm) 1187,8 X 252,0 X 781,9 (mm) 1389,3 X 56,0 X 828,2 (mm) 1389,3 X 330,0 X 907,9 (mm) Gewicht Ohne Fuß Mit Fuß 19,6 kg 22,1 kg 28,3 kg 32,6 kg ✎Änderungen der technischen Daten und des Geräte-Designs vorbehalten. ✎Die technischen Daten zur benötigten Netzspannung und zum Energieverbrauch finden Sie auf dem Etikett am Produkt. ✎Der typische Stromverbrauch wird gemäß IEC 62087 Ed.2 gemessen. BN68-03998E-DEU.indd 12 2012-02-27 �� 2:37:36Deutsch - Unterstützte Videoformate Dateinamenserweiterung Container Videocodec Auflösung Framerate (f/s) Bitrate (Mbit/s) Audiocodec *.avi *.mkv *.asf *.wmv *.mp4 *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.m2ts *.mts *.divx AVI MKV ASF MP4 3GP VRO VOB PS TS DivX 3.11/4.x/5.x/6.1 1920 x 1080 6~30 30 AC3 LPCM ADMPCM (IMA, MS) AAC HE-AAC WMA DD+ MPEG (MP3) DTS Core MPEG4 SP/ASP H.264 BP/MP/HP Motion JPEG 640 x 480 8 Window Media Video V. 9 MPEG2 1920 x 1080 30 MPEG1 Höchste verfügbare Auflösung: 1920 X 1080 bei 60 Hz Modus Auflösung Horizontalfrequenz (kHz) Vertikalfrequenz (Hz) Pixeltakt (MHz) Synchronisationspolarität (H/V) IBM 640 x 350 31.469 70.086 25.175 +/- 720 x 400 31.469 70.087 28.322 -/+ MAC 640 x 480 35.000 66.667 30.240 -/- 832 x 624 49.726 74.551 57.284 -/- 1152 x 870 68.681 75.062 100.000 -/- VESA DMT 640 x 480 31.469 59.940 25.175 -/- 640 x 480 37.861 72.809 31.500 -/- 640 x 480 37.500 75.000 31.500 -/- 800 x 600 37.879 60.317 40.000 +/+ 800 x 600 48.077 72.188 50.000 +/+ 800 x 600 46.875 75.000 49.500 +/+ 1024 x 768 48.363 60.004 65.000 -/- 1024 x 768 56.476 70.069 75.000 -/- 1024 x 768 60.023 75.029 78.750 +/+ 1152 x 864 67.500 75.000 108.000 +/+ 1280 x 720 45.000 60.000 74.250 +/+ 1280 x 800 49.702 59.810 83.500 -/+ 1280 x 1024 63.981 60.020 108.000 +/+ 1280 x 1024 79.976 75.025 135.000 +/+ 1366 x 768 47.712 59.790 85.500 +/+ 1440 x 900 55.935 59.887 106.500 -/+ 1600 x 900RB 60.000 60.000 108.000 +/+ 1680 x 1050 65.290 59.954 146.250 -/+ 1920 x 1080 67.500 60.000 148.500 +/+ [PE530-XNZF]BN68-04068E.indb 13 2012-02-15 �� 1:45:02Nederlands - 2 Meer informatie over het gebruik van het e-Manual vindt u op pagina 9. De afbeeldingen en illustraties in deze gebruiksaanwijzing dienen alleen ter referentie en kunnen afwijken van het werkelijke uiterlijk van het product. Het ontwerp en de specificaties van het product kunnen zonder kennisgeving worden gewijzigd. Opmerking over digitale tv 1. Functionaliteit betreffende digitale televisie (DVB) is alleen beschikbaar in landen/gebieden waar digitale DVB-T-televisiesignalen (MPEG2 en MPEG4 AVC) per zendmast worden uitgezonden of waar u toegang hebt tot een compatibele DVB-C-service (MPEG2 en MPEG4 AAC) voor kabel-tv. Vraag aan uw plaatselijke aanbieder of u DVB-T- of DVB-C-signalen kunt ontvangen. 2. DVB-T is de Europese DVB-consortiumstandaard voor de uitzending van digitale televisie via de zendmast en DVB-C voor de uitzending van digitale televisie via de kabel. Bepaalde specifieke functies, zoals EPG (Elektronische programmagids), VOD (Video on Demand) enzovoort, zijn echter niet opgenomen in deze specificatie. Deze werken dus mogelijk niet. 3. Hoewel dit televisietoestel voldoet aan de huidige DVB-T- en DVB-C-standaarden vanaf [augustus 2008], kan de compatibiliteit met toekomstige digitale DVB-T-signalen via de zendmast en digitale DVB-C-signalen via de kabel niet worden gegarandeerd. 4. Afhankelijk van de landen/gebieden waar dit televisietoestel wordt gebruikt, kunnen aanbieders van kabeltelevisie extra kosten voor dergelijke services in rekening brengen en moet u wellicht akkoord gaan met hun voorwaarden en bepalingen. 5. Bepaalde digitale televisiefuncties zijn mogelijk niet beschikbaar in bepaalde landen of regio's en DVB-C werkt mogelijk niet goed bij bepaalde leveranciers van kabelservices. 6. Neem voor meer informatie contact op met de klantenservice van Samsung. ✎ De ontvangstkwaliteit van televisie-uitzendingen kan minder goed zijn door verschil in uitzendmethode tussen landen. Controleer de televisieprestaties bij uw plaatselijke geautoriseerde SAMSUNG-dealer of bel de klantenservice van Samsung om te informeren of u de kwaliteit kunt verbeteren door de tv-instellingen aan te passen. Instructies voor gebruik • Beeldretentie Geef een stilstaand beeld (bijvoorbeeld van een videospel) niet langer dan enkele minuten op het plasmascherm weer, omdat dit beeldretentie kan veroorzaken. Beeldretentie wordt ook wel 'inbranden' genoemd. Verlaag bij de weergave van een stilstaand beeld de helderheid en het contrast om beeldretentie te voorkomen. • Warmte op de bovenkant van de plasma-tv De bovenkant van het scherm kan na een lange gebruiksperiode erg warm worden, omdat de warmte van het scherm zich door het ventilatiegat aan de bovenkant van het toestel verspreidt. Dit is normaal en duidt niet op een defect of storing. Zorg dat kinderen de bovenkant van het product niet kunnen aanraken. • Het product maakt een 'krakend' geluid. Een 'krakend' geluid kan optreden als het product uitzet of inkrimpt door een verandering in de omgeving, zoals de temperatuur of de luchtvochtigheid. Dit is normaal en duidt niet op een defect. • Celdefecten Het plasmascherm gebruikt een paneel dat bestaat uit 2.360.000 (HD-niveau) tot 6.221.000 (FHD-niveau) pixels, wat het gebruik van geavanceerde productietechnologie vereist. Het scherm kan echter enkele heldere of donkere pixels bevatten. Deze pixels zijn niet van invloed op de prestaties van het product. • Gebruik de tv niet bij een temperatuur lager dan 5°C • Als u een stilstaand beeld te lang op het scherm weergeeft, kan plasmascherm permanent beschadigd raken. Als u gedurende langere tijd naar uw plasma-tv kijkt terwijl het beeld in 4:3-formaat wordt weergegeven, kunnen aan de linker- en rechterkant en in het midden van het scherm randen achterblijven. Hetzelfde effect kan optreden wanneer u een dvd afspeelt of een spelcomputer gebruikt. Schade ontstaan door het bovengenoemde effect valt niet onder de garantie. • Scherminbranding. Het gedurende langere tijd weergeven van stilstaande beelden van dvd- of computerspellen kan (gedeeltelijke) scherminbranding tot gevolg hebben. Om dit te voorkomen, kunt u tijdens het langdurig weergeven van stilstaande beelden de 'helderheid' en het 'contrast' verminderen. • Garantie De garantievoorwaarden gelden niet voor schade veroorzaakt door beeldretentie. Het inbranden van het scherm valt niet onder de garantievoorwaarden. Juiste afvoer van dit product (afvalverwerking van elektrische en elektronische apparatuur) (Van toepassing in de Europese Unie en overige Europese landen met gescheiden inzamelingssystemen) Dit label op het product, de accessoires of de documentatie bij dit product duidt erop dat het product en de bijbehorende elektronische accessoires (bijvoorbeeld de oplader, headset of USB-kabel) aan het eind van de levensduur niet mogen worden afgevoerd met het huishoudelijk afval. Om milieuverontreiniging of problemen voor de volksgezondheid als gevolg van ongeregelde afvalverwerking te voorkomen, dient u deze items van het andere afval te scheiden zodat de materialen op verantwoorde wijze kunnen worden hergebruikt. Thuisgebruikers moeten contact opnemen met de winkel waar ze het product gekocht hebben of met de plaatselijke overheidsinstanties als ze willen weten waar en hoe ze deze items op milieuvriendelijke wijze kunnen recyclen. Zakelijke gebruikers dienen contact op te nemen met de leverancier en de voorwaarden en bepalingen van het koopcontract te raadplegen. Dit product en de bijbehorende elektronische accessoires mogen niet samen met ander commercieel afval worden afgevoerd. Juiste afvoer van de batterijen in dit product (Van toepassing in de Europese Unie en andere Europese landen met systemen voor batterij-inzameling) Wanneer deze markering op de batterij, de handleiding of de verpakking wordt weergegeven, geeft dit aan dat de batterijen in dit product aan het einde van hun levensduur niet samen met het gewone huishoudelijke afval mogen worden afgevoerd. Wanneer u de chemische symbolen Hg, Cd of Pb ziet, betekent dit dat de batterij respectievelijk kwik, cadmium of lood boven de referentieniveaus in EU-richtlijn 2006/66 bevat. Als batterijen niet op de juiste wijze worden afgevoerd, kunnen deze stoffen schade aanrichten aan het milieu of de menselijke gezondheid. Om de natuurlijke hulpbronnen te beschermen en hergebruik van materiaal te bevorderen, moet u batterijen scheiden van andere soorten afval en ze via uw plaatselijke, gratis batterij-inzamelsysteem recyclen. [PE530-XNZF]BN68-04068E.indb 2 2012-02-15 �� 1:45:03Nederlands - 3 Accessoires ✎Controleer of de volgende onderdelen bij uw tv geleverd zijn. Neem contact op met uw verkoper als er onderdelen ontbreken. ✎De vorm en kleur van de items kunnen enigszins afwijken. Dit is afhankelijk van het model. ✎Kabels die niet bij het product worden geleverd, kunnen apart worden aangeschaft. • Afstandsbediening en batterijen (AAA x 2) • Netsnoer • Gebruiksaanwijzing • Schoonmaakdoekje • Garantiekaart/veiligheidsvoorschriften (niet op alle locaties beschikbaar) Ferrietkern (1 stuks) ✎Ferrietkern voor netsnoer: de ferrietkernen schermen de kabels af voor storingen. Open de ferrietkern bij het aansluiten van een kabel en klem deze om de kabel bij de plug, zoals wordt weergegeven in de afbeelding. x A Maximale afstand tussen de ferrietkern en het uiteinde van het snoer in de tv: 2 cm A B Netsnoer ✎In de volgende gevallen kunnen administratiekosten in rekening worden gebracht: (a) er wordt op uw verzoek een monteur gestuurd, maar het product is niet defect (bijvoorbeeld wanneer u deze gebruiksaanwijzing niet hebt gelezen) (b) U brengt het apparaat naar een reparatiecentrum, maar het product is niet defect (bijvoorbeeld wanneer u deze gebruiksaanwijzing niet hebt gelezen) ✎U wordt op de hoogte gesteld van deze administratiekosten voordat een dergelijke reparatie of bezoek wordt uitgevoerd. [PE530-XNZF]BN68-04068E.indb 3 2012-02-15 �� 1:45:03Nederlands - 4 De controller van de tv (schermtoets) gebruiken Tv-bediening is een knop met meerdere richtingen waarmee u zonder afstandsbediening kunt navigeren. ✎Sommige functies die een pincode vereisen, zijn mogelijk niet beschikbaar. ✎De vorm en kleur van het product kunnen afhankelijk van het model variëren. ✎Het menu wordt afgesloten als de afstandsbediening langer dan 1 seconde wordt ingedrukt. ✎Als u de functie selecteert door de afstandsbediening omhoog/omlaag/naar links/ naar rechts te bewegen moet u ervoor zorgen dat u niet op de afstandsbediening drukt. Als u eerst drukt, kunt u niet omhoog/omlaag/naar links/naar rechts bewegen. Functiemenu Terug Sensor voor de afstandsbediening Afstandsbediening Omhoog (voor) Omlaag (achter) Links Rechts Inschakelen U kunt de tv inschakelen door in de standby-stand op de afstandsbediening te drukken. Het volume instellen U kunt het volume aanpassen door de afstandsbediening heen en weer te bewegen als het toestel is ingeschakeld. Een kanaal selecteren U kunt een kanaal selecteren door de afstandsbediening omhoog en omlaag te bewegen als het toestel is ingeschakeld. Het functiemenu gebruiken Druk op de afstandsbediening als het toestel is ingeschakeld om het scherm met het functiemenu weer te geven. Als u opnieuw op de afstandsbediening drukt, wordt het scherm met het functiemenu weer gesloten. Het menu gebruiken Selecteer het MENU(m) door de afstandsbediening te bewegen terwijl het scherm met het functiemenu wordt weergegeven. Het schermmenu (OSD) van uw televisiefunctie wordt weergegeven. De bron selecteren Selecteer de Bron( ) door de afstandsbediening te bewegen terwijl het scherm met het functiemenu wordt weergegeven. Het lijstscherm Bron wordt weergegeven. De Startpagina Inhoud selecteren Selecteer de Startpagina Inhoud( ) door de afstandsbediening te bewegen terwijl het scherm met het functiemenu wordt weergegeven. Het hoofdscherm van Startpagina Inhoud wordt geopend. Uitschakelen Selecteer de functie TV uitzetten(P) door de afstandsbediening te bewegen terwijl het scherm met het functiemenu wordt weergegeven. Stand-bymodus Laat de tv niet gedurende langere tijd in de stand-bymodus staan (bijvoorbeeld wanneer u op vakantie bent). Zelfs wanneer het apparaat via de aan/uit-knop is uitgeschakeld, wordt een kleine hoeveelheid stroom gebruikt. U kunt het netsnoer het beste loskoppelen. Plaatsing van het product Bewaar de nodige afstand tussen het product en andere objecten (bijvoorbeeld muren) zodat er een goede ventilatie mogelijk is. Wanneer u dit niet doet, kunnen er door een stijging van de interne temperatuur brand of problemen met het product ontstaan. ✎Bij gebruik van een voet of wandbevestiging mogen er alleen onderdelen worden gebruikt die door Samsung Electronics zijn geleverd. x Het gebruik van onderdelen van een andere fabrikant kan leiden tot problemen met het product of zelfs tot lichamelijk letsel doordat het product valt. ✎Het uiterlijk van het product kan afwijken van het afgebeelde apparaat. ✎Wees voorzichtig wanneer u de tv aanraakt. Sommige onderdelen kunnen heet zijn. Plaatsing op een voet. Plaatsing met een wandbevestiging. 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm [PE530-XNZF]BN68-04068E.indb 4 2012-02-15 �� 1:45:05Nederlands - 5 Overzicht van de afstandsbediening ✎Dit is een speciale afstandsbediening voor visueel gehandicapten en is voorzien van brailletekens bij de POWER-, kanaal- en volumetoetsen. A B C D E-MANUAL P.SIZE AD/SUBT. CONTENT Batterijen plaatsen (batterijformaat: AAA) Hiermee schakelt u de tv in en uit. De beschikbare videobronnen weergeven en selecteren. Hiermee gaat u terug naar het vorige kanaal. Hiermee wordt het geluid tijdelijk uitgeschakeld. Hiermee kunt u het kanaal wijzigen. Hiermee wordt de kanaallijst op het scherm weergegeven. De EPG (elektronische programmagids) weergeven. Hiermee wordt informatie op het tv-scherm weergegeven. Hiermee kunt u het menu afsluiten. Druk op deze toets voor directe toegang tot kanalen. Hiermee regelt u het volume. Wisselen tussen Teletekst AAN, Dubbel, Mix of UIT. Hiermee geeft u het hoofdmenu weer. Snel veelgebruikte functies selecteren. Hiermee wordt Startpagina Inhoud weergegeven. Hiermee gaat u terug naar het vorige menu. Hiermee kunt u de opties in het schermmenu selecteren en de waarden wijzigen die in het menu worden weergegeven. Gebruik deze toetsen volgens de instructies op het scherm. Gebruik deze knoppen in een specifieke functie. Raadpleeg het e-Manual voor meer informatie. E-MANUAL: hiermee geeft u het e-Manual weer. (p. 9) P.SIZE: hiermee selecteert u het beeldformaat. AD/SUBT.: audiobeschrijving selecteren. (niet overal beschikbaar) / digitale ondertiteling weergeven. [PE530-XNZF]BN68-04068E.indb 5 2012-02-15 �� 1:45:05Nederlands - 6 Eerste instellingen Wanneer de tv voor het eerst wordt ingeschakeld, verschijnen er een enkele instructies op het scherm die u helpen de basisinstellingen te configureren. Druk op de toets POWERP. Instellingen is alleen beschikbaar als de bron is ingesteld op Tv. 1. Menutaal: een menutaal selecteren Druk op de toets ▲ of ▼ en druk vervolgens op de toets ENTERE. Selecteer de gewenste taal voor het schermmenu. 2. Gebruiksmodus: selecteer Winkeldemo of Thuisgebruik. Druk op de toets ▲ of ▼ en druk vervolgens op de toets ENTERE. Selecteer de modus Thuisgebruik. De modus Winkeldemo is alleen bedoeld voor gebruik in winkels. ✎Als u op de afstandsbediening van de tv drukt, wordt het scherm van het functiemenu weergegeven. Selecteer de functie MENU(m) en houd deze ruim 5 seconden ingedrukt met de afstandsbediening. De modus Winkeldemo wordt ingesteld. ✎Annuleer de modus Winkeldemo door Bron( ) te selecteren en deze ruim 5 seconden ingedrukt te houden. ✎Winkeldemo is alleen bedoeld voor winkels. Als u deze modus selecteert, zijn verschillende functies niet beschikbaar. Selecteer Thuisgebruik als u thuis tv kijkt. 3. Land (Afhankelijk van het land): een land selecteren Druk op de toets ▲ of ▼ en druk vervolgens op de toets ENTERE. Selecteer uw land. ✎Na het selecteren van uw land in het menu Land kunt u op sommige modellen vervolgens een pincode instellen. 4. Automatisch afstemmen (Stap 1): selecteren hoe u tv wilt kijken Kanalen zoeken en in de tv opslaan. Wilt u kanalen zoeken? • Ja: alle beschikbare kanalen worden in het geheugen opgenomen met een RF-kabel. • Nee: U hoeft Automatische afstemming niet te gebruiken voor het zoeken van kanalen. 5. Automatisch afstemmen (Stap 2): een zoekoptie selecteren. Selecteer het gewenste zendsignaal en de antennebron. Druk op de toets ▲/▼/◄/► en vervolgens op ENTERE. Wanneer u de antennebron als Kabel instelt, kunt u numerieke waarden (kanaalfrequenties) voor de kanalen opgeven. Zie voor meer informatie Kanaal → Automatisch afstemmen. ✎U kunt op ieder moment op de toets ENTERE drukken om de opslagprocedure te onderbreken. ✎Zie het hoofdstuk “Kanalen opnieuw afstemmen > Automatisch afstemmen” in de e-Manual 6. Klok: de Klokmodus instellen • Auto: de huidige tijd automatisch instellen. • Handm.: hiermee kunt u de huidige datum en tijd handmatig instellen. 7. Instellingen voltooid Druk op de toets ENTERE. ✎De voltooide instellingen worden weergegeven. Als u deze functie wilt resetten... Ook al hebt u dit al in de winkel gedaan, moet u thuis nogmaals Instellingen (MENU → Systeem) uitvoeren. Selecteer Systeem - Instellingen (Eerste instelling). Voer uw viercijferige pincode in. De standaardpincode is ‘0-0-0-0’ (behalve Frankrijk). Als u de pincode wilt wijzigen, gebruikt u de functie PIN wijzigen. ✎Als u de pincode bent vergeten, drukt u in de stand-bymodus achtereenvolgens op de volgende toetsen van de afstandsbediening zodat de pincode opnieuw wordt ingesteld op ‘0-0-0-0’ (Frankrijk: “1-1-1-1”): POWER (uit) → MUTE → 8 → 2 → 4 → POWER (aan). [PE530-XNZF]BN68-04068E.indb 6 2012-02-15 �� 1:45:06Nederlands - 7 Aansluitingen HDMI IN 2 HDMI IN 1 (DVI) COMPONENT / AV IN SERVICE VIDEO AUDIO ANT IN EXT (RGB) DIGITAL AUDIO OUT (OPTICAL) (5V 0.5A) OPTICAL EXT AUDIO OUT R-AUDIO-L PR PB Y AUDIO OUT COMPONENT OUT R-AUDIO-L VIDEO OUT R B R B GR R W R Y Y W R W R W R G AUDIO OUT DVI OUT HDMI OUT R-AUDIO-L PC R W VHF/UHF-antenne Kabel USB of Achterpaneel tv Zijpaneel TV BD-speler / PC HDMI, HDMI/DVI-verbinding Audioaansluiting SCART-verbinding Hoofdtelefoonsaansluiting BD-speler Component-verbinding BD-speler AV-verbinding ✎De locatie van de poort kan afhankelijk van het model afwijken. ✎Het PDP-apparaat kan de ontvangst van amateur- en AMzenders storen. ✎Het gebruik van een tweezijdig radiosysteem en draagbare unit of amateurradio of AM-radio in de buurt van uw tv kan leiden tot een niet goed functionerende tv. ✎Zowel Component- als AV-verbinding wordt in één poort ondersteund. Videorecorder of dvdspeler [PE530-XNZF]BN68-04068E.indb 7 2012-02-15 �� 1:45:07Nederlands - 8 SERVICE SERVICE Aansluiting alleen voor onderhoud. ✎LET OP • Bij gebruik van de HDMI/DVI-kabelaansluiting moet u de HDMI IN 1(DVI)-poort gebruiken. • De interlace-modus wordt niet ondersteund. • De tv werkt mogelijk niet normaal als een afwijkend videoformaat wordt geselecteerd. • Afzonderlijke modus en compositemodus worden ondersteund. SOG (Sync On Green) wordt niet ondersteund. • PC(D-Sub)-invoer wordt niet ondersteund. • Verbinding maken via de HDMI-kabel wordt mogelijk niet ondersteund, afhankelijk van de pc. • De koptelefoonstekker ondersteunt uitsluitend aansluitingen met 3 geleiders van het TRS-type (Tip-Ring-Sleeve). Een COMMON INTERFACE-sleuf aansluiten (kaartsleuf voor het bekijken van tv-programma’s) Voor betaalde kanalen moet een CI of CI+ CARD zijn geplaatst. • Als u de CI-/CI+-kaart niet plaatst, wordt bij sommige kanalen de melding "Gecodeerd signaal" weergegeven. • De koppelingsgegevens met een telefoonnummer, de ID van de CI of CI+ CARD, de host-ID en andere informatie worden na circa 2-3 minuten weergegeven. Als een foutmelding wordt weergegeven, moet u contact opnemen met uw serviceprovider. • Wanneer de kanaalgegevens zijn geconfigureerd, wordt de melding Update voltooid weergegeven. Hiermee wordt aangegeven dat de kanalenlijst is bijgewerkt. Zijpaneel TV y De afbeelding kan afwijken, afhankelijk van het model. De ingangsbron wijzigen Bron TV / Ext. / HDMI1/DVI / HDMI2 / AV / Component Hiermee kunt u de tv of andere externe ingangsbronnen zoals dvd-spelers/Blu-rayspelers/kabelboxen/STB-satellietontvangers die op de tv zijn aangesloten, selecteren. ✎In de weergegeven lijst Bron worden aangesloten ingangen gemarkeerd. ✎PC(D-Sub)-invoer wordt niet ondersteund. Als u de pc wilt aansluiten op de tv, kunt u HDMI1/DVI-invoer gebruiken. ✎Ext. blijft altijd geactiveerd. ✎Druk op de toets TOOLS. • Naam wijzigen U kunt een externe invoerbron de naam van uw keuze geven. – Wanneer u een pc op de HDMI IN 1(DVI) aansluit met de HDMI-kabel, moet u de tv op de modus PC instellen onder Naam wijzigen. – Wanneer u een pc op de HDMI IN 1(DVI) aansluit met de HDMI-naar-DVI-kabel, moet u de tv op de modus DVI PC instellen onder Naam wijzigen. – Wanneer u een AV-apparaat op de HDMI IN 1(DVI) aansluit met de HDMI-naar-DVI-kabel, moet u de tv op de modus DVIapparaten instellen onder Naam wijzigen. • Informatie Hiermee kunt u gedetailleerde informatie over het aangesloten externe apparaat weergeven. Weergavemodi (HDMI/DVI-ingang) De optimale resolutie is 1920 x 1080 bij 60Hz. Zie de pagina met specificaties voor de volledige beschikbare resolutie. [PE530-XNZF]BN68-04068E.indb 8 2012-02-15 �� 1:45:08Nederlands - 9 Het e-Manual gebruiken E-MANUAL U vindt de instructies over de functies van uw tv in het e-Manual van uw tv. Druk hiervoor op de toets E-MANUAL op uw afstandsbediening. Verplaats de cursor met de toetsen omhoog/omlaag/rechts/links om een categorie en vervolgens een onderwerp te markeren en druk vervolgens op de toets ENTERE. Via het e-Manual wordt de pagina weergegeven die u wilt bekijken. U kunt de handleiding ook via het menu starten: O MENUm→ Ondersteuning → e-Manual → ENTERE ✎Als u wilt terugkeren naar het hoofdmenu van het e-Manual, drukt u op de toets E-MANUAL op de afstandsbediening. Schermweergave Bedieningstoetsen } Index: hiermee geeft u het indexscherm weer. E Enter: hiermee selecteert u een categorie of submenu. e Afsl.: het e-Manual sluiten. a Probeer nu: hiermee geeft u het schermmenu weer dat correspondeert met het onderwerp. Als u wilt terugkeren naar het e-Manual-scherm, drukt u op de toets E-MANUAL. b Start: het startscherm van het e-Manual weergeven. L Pagina: de vorige of volgende pagina weergeven. { Zoom: een scherm vergroot weergeven. – Selecteer Zoom en druk vervolgens op ENTERE om het scherm te vergroten. U kunt door het vergrote scherm scrollen met de toetsen ▲ en ▼. Als u het scherm weer de normale grootte wilt geven, drukt u op de toets RETURN. Basisfuncties De vooraf ingestelde beeldmodus wijzigen De beeldinstellingen aanpassen Het veranderen van de foto-opties De vooraf ingestelde geluidsmodus wijzigen Geluidsinstellingen aanpassen } Index E Enter e Afsl. Momenteel weergegeven video, tvprogramma enzovoort. De categorielijst. Druk op de toets ◄ of ► of om de gewenste categorie te selecteren. De lijst met submenu's wordt weergegeven. Gebruik de pijltoetsen op de afstandsbediening om de cursor te verplaatsen. Druk op de toets ENTERE om het gewenste submenu te selecteren. Schakelen tussen het e-Manual en de bijbehorende schermmenu's. ✎Deze functie is niet beschikbaar voor sommige menu's. ✎U kunt de functie Probeer nu niet gebruiken als het menu niet is geactiveerd. Methode 1 Methode 2 1. Als u het menu wilt gebruiken dat correspondeert met een e-Manual-onderwerp, drukt u op de rode toets om Probeer nu te selecteren. 2. Als u wilt terugkeren naar het e-Manual-scherm, drukt u op de toets E-MANUAL. 1. Druk op de toets ENTERE als een onderwerp wordt weergegeven. “Wilt u dit uitvoeren?” wordt weergegeven. Selecteer Ja en druk vervolgens op de toets ENTERE. Het schermvenster verschijnt. 2. Als u wilt terugkeren naar het e-Manual-scherm, drukt u op de toets E-MANUAL. Een onderwerp zoeken op de indexpagina ✎Deze functie wordt mogelijk niet ondersteund, afhankelijk van de taal. 1. Als u een trefwoord wilt zoeken, drukt u op de blauwe toets om het scherm Index te openen. 2. Druk op de toets ◄ of ► om het gewenste teken te selecteren. 3. Druk op de toets ▲ of ▼ om een trefwoord te selecteren en druk vervolgens op de toets ENTERE. 4. U kunt nu het bijbehorende scherm met e-Manual-instructies bekijken. ✎Als u het scherm Index wilt sluiten, drukt u op de toets RETURN. [PE530-XNZF]BN68-04068E.indb 9 2012-02-15 �� 1:45:09Nederlands - De wandbevestiging plaatsen Met de wandbevestigingsset (apart verkrijgbaar) kunt u de tv aan de muur bevestigen. Zie de instructies bij de onderdelen voor wandbevestiging als u wilt weten hoe u de wandbevestiging installeert. Neem contact op met een technicus voor hulp alvorens de wandbeugel te bevestigen. We raden aan dat u dit niet zelf doet. Samsung Electronics is niet verantwoordelijk voor schade aan het product of voor verwondingen die u zelf of anderen oplopen wanneer u besluit de tv zelfstandig te installeren. Specificaties voor de wandbevestigingsset (VESA) ✎De wandbevestigingsset is niet meegeleverd, maar wordt apart verkocht. Monteer de wandbevestiging op een stevige wand die loodrecht op de vloer staat. Wanneer de steun aan andere bouwmaterialen bevestigd moet worden, dient u contact op te nemen met de dichtstbijzijnde leverancier. Als u de wandbevestiging aan het plafond of een schuine wand monteert, kan de tv vallen en daarmee tot zwaar lichamelijk letsel leiden. ✎LET OP x In de onderstaande tabel vindt u de standaardafmetingen voor wandbevestigingssets. x Wanneer u onze wandbevestigingsset aanschaft, zijn een gedetailleerde installatiegids en alle vereiste montageonderdelen daarbij inbegrepen. x Gebruik geen schroeven die niet aan de standaard VESA-schroefspecificaties voldoen. x Gebruik geen schroeven die langer zijn dan de standaardafmetingen, omdat anders de binnenkant van de tv beschadigd kan raken. x Voor wandbevestigingen die niet voldoen aan de standaardspecificaties voor VESA-schroeven, kan de lengte van de schroeven afhankelijk van de specificaties afwijken. x Draai de schroeven niet te vast. Dit zou ertoe kunnen leiden dat het product beschadigt of valt, resulterend in lichamelijk letsel. Samsung is voor dit soort ongevallen niet aansprakelijk. x Samsung is niet aansprakelijk voor productschade of lichamelijk letsel wanneer een niet-VESA of nietgespecificeerde wandbevestiging is gebruikt of wanneer de consument de installatie-instructies voor het product niet in acht heeft genomen. x Kantel deze tv voor de bevestiging nooit meer dan 15 graden. inches VESA-spec. (A * B) Standaardschroef Aantal 43~51 400 X 400 M8 4 60~64 600 X 400 Monteer de wandbevestigingsset niet terwijl de tv is ingeschakeld. Dit kan resulteren in lichamelijk letsel door elektrische schokken. De tv vastzetten aan de wand Let op: als u duwt of trekt aan de tv of op de tv klimt, kan deze vallen. Zie er met name op toe dat uw kinderen niet aan de tv gaan hangen of deze uit balans brengen. De tv kan dan omvallen, wat verwondingen kan veroorzaken of zelfs fatale gevolgen kan hebben. Neem alle voorzorgsmaatregelen die in de bijgesloten veiligheidsfolder worden genoemd. Om veiligheidsredenen is het raadzaam de antivalvoorziening te installeren om de stabiliteit van het toestel te verhogen. Voorkomen dat de tv valt 1. Plaats de schroeven in de beugels en bevestig deze stevig aan de wand. Controleer of de schroeven stevig in de wand zijn gedraaid. ✎Afhankelijk van het wandtype hebt u mogelijk aanvullend materiaal nodig om het geheel te verankeren. ✎De benodigde beugels, schroeven en kabel worden niet meegeleverd. Deze moeten apart worden aangeschaft. 2. Verwijder de schroeven in het midden aan de achterkant van de tv, steek de schroeven door de beugels en draai de schroeven weer vast in de tv. ✎Het is mogelijk dat de schroeven niet bij het product worden meegeleverd. In dat geval moet u schroeven met de volgende specificaties aanschaffen. 3. Verbind de beugels die aan de tv zijn bevestigd met een sterke draad aan de beugels die aan de muur zijn bevestigd en knoop de draad stevig vast. ✎LET OP • Plaats de tv dicht bij de muur zodat deze niet achterover kan vallen. • Het is veilig om de draad zodanig aan te brengen dat de beugels die aan de muur zijn bevestigd zich boven de beugels op de tv of op gelijke hoogte daarmee bevinden. • Haal de draad los voordat u de tv verplaatst. 4. Controleer of alle bevestigingen goed zijn aangebracht. Controleer de bevestigingspunten regelmatig op tekenen van moeheid of verzwakking. Neem in geval van twijfel over de veiligheid van de bevestiging contact op met een professionele installateur. [PE530-XNZF]BN68-04068E.indb 10 2012-02-15 �� 1:45:10Nederlands - Problemen oplossen Als er een probleem lijkt te zijn met de tv, probeert u eerst deze lijst met mogelijke problemen en oplossingen. Als geen van deze tips voor het oplossen van problemen van toepassing is, gaat u naar 'www.samsung.com' en klikt u op Support (Ondersteuning) of neemt u contact op met de klantenservice van Samsung. Problemen De tv wordt niet ingeschakeld. • Controleer of het netsnoer stevig op het stopcontact en op de tv is aangesloten. • Controleer of het stopcontact werkt. • Druk op de POWER-toets op de tv om te controleren of het probleem niet bij de afstandsbediening ligt. Als de tv wordt ingeschakeld, raadpleegt u 'De afstandsbediening werkt niet' hieronder. Problemen Er is geen beeld/video. • Controleer de kabelverbindingen (haal alle kabels die op de tv en externe apparaten zijn aangesloten, los en sluit ze vervolgens weer aan). • Stel de video-uitgang van het externe apparaat (kabelbox/settopbox, dvd, Blu-ray enzovoort) in zodat deze overeenkomt met de aansluitingen van de tv-ingang. Als bijvoorbeeld de HDMI-uitgang van een extern apparaat wordt gebruikt, moet deze op de HDMI-ingang van de tv worden aangesloten. • Controleer of de aangesloten apparaten zijn ingeschakeld. • Selecteer de juiste bron voor de tv door op de toets SOURCE op de afstandsbediening te drukken. • Start het aangesloten apparaat opnieuw op door het netsnoer van het apparaat opnieuw aan te sluiten. Problemen De afstandsbediening werkt niet. • Vervang de batterijen van de afstandsbediening en plaats de batterijen met de polen (+/–) in de juiste richting. • Reinig het venster van de zender op de afstandsbediening. • Richt vanaf circa 1,5 tot 2 meter afstand de afstandsbediening direct naar de televisie. Problemen Met de afstandsbediening van de kabelbox/settopbox kan de tv niet worden in- of uitgeschakeld of kan het volume niet worden geregeld. • Programmeer de afstandsbediening voor de kabelbox/settopbox zodanig dat deze werkt voor de tv. Raadpleeg de gebruiksaanwijzing van uw kabelbox/settopbox voor de code voor de SAMSUNG-tv. ✎U kunt de tv in optimale conditie houden door op de website via USB een upgrade naar de nieuwste firmware uit te voeren (www.samsung.com → Service → Downloadcentrum). Licentie-informatie Opslag en onderhoud ✎Als u de sticker op het tv-scherm verwijdert, moet u de lijmresten weghalen alvorens tv te kijken. ✎Bij het reinigen van de behuizing en het scherm kunnen er krassen ontstaan. Zorg ervoor dat u de behuizing en het scherm voorzichtig afneemt met de doek die bij het product is geleverd of met een andere zachte doek om krassen te voorkomen. Sproei geen water rechtstreeks op het product. Vloeistoffen die in het product terechtkomen kunnen een storing, brand of elektrische schok veroorzaken. Reinig het product met een zachte doek die licht met water is bevochtigd. Gebruik geen ontvlambare vloeistoffen (zoals wasbenzine of thinner) of een reinigingsmiddelen. [PE530-XNZF]BN68-04068E.indb 11 2012-02-15 �� 1:45:11Nederlands - ���� Specificaties Omgevingsvereisten Bedrijfstemperatuur Gebruiksvochtigheid Opslagtemperatuur Opslagvochtigheid 10°C 40°C 50°F 104°F -20°C 45°C -4°F 113°F tot ( tot ) 10% tot 80%, niet-condenserend 10°C 40°C 50°F 104°F -20°C 45°C -4°F 113°F tot ( tot ) 5% tot 95%, niet-condenserend Tv-systeem Analoog: B/G, D/K, L, I (afhankelijk van de landkeuze) Digitaal: DVB-T/DVB-C Kleuren-/videosysteem Analoog: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60 Digitaal: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0 Geluidssysteem BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC HDMI IN Video: 1080 24p, 1080p, 1080i, 720p, 576p, 480p Audio: 2-kan. lineair PCM 32/44.1/48 kHz, 16/20/24 bits. Modelnaam PS51E530 PS60E530 Beeldresolutie 1920 X 1080 1920 X 1080 (Zwart-wit) Schermformaat 19 22 26 32 40 43 46 51 60inch (128 cm) 19 22 26 32 40 43 46 51 60 inch (152 cm) Geluidsuitgang 10W X 2 Afmetingen (BxHxD) Behuizing Met voet 1187,8 X 56,0 X 706,6 (mm) 1187,8 X 252,0 X 781,9 (mm) 1389,3 X 56,0 X 828,2 (mm) 1389,3 X 330,0 X 907,9 (mm) Gewicht Zonder voet Met voet 19,6 kg 22,1 kg 28,3 kg 32,6 kg ✎Vormgeving en specificaties kunnen zonder kennisgeving worden gewijzigd. ✎Zie voor informatie over de stroomvoorziening en het energieverbruik het etiket op het product. ✎Standaard stroomverbruik gemeten overeenkomstig IEC 62087 Ed.2 BN68-03998E-DUT.indd 12 2012-02-27 �� 2:38:07Nederlands - Ondersteunde videobestandsindelingen Bestandsextensie Container Videocodec Resolutie Framesnelheid (fps) Bitsnelheid (Mbps) Audiocodec *.avi *.mkv *.asf *.wmv *.mp4 *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.m2ts *.mts *.divx AVI MKV ASF MP4 3GP VRO VOB PS TS DivX 3.11/4.x/5.x/6.1 1920 x 1080 6~30 30 AC3 LPCM ADMPCM (IMA, MS) AAC HE-AAC WMA DD+ MPEG (MP3) DTS Core MPEG4 SP/ASP H.264 BP/MP/HP Motion JPEG 640 x 480 8 Window Media Video v9 MPEG2 1920 x 1080 30 MPEG1 Volledige beschikbare resolutie: 1920 X 1080 bij 60 Hz Modus Resolutie Horizontale frequentie (kHz) Verticale frequentie (Hz) Pixelklokfrequentie (MHz) Synchronisatie- polariteit (H/V) IBM 640 x 350 31.469 70.086 25.175 +/- 720 x 400 31.469 70.087 28.322 -/+ MAC 640 x 480 35.000 66.667 30.240 -/- 832 x 624 49.726 74.551 57.284 -/- 1152 x 870 68.681 75.062 100.000 -/- VESA DMT 640 x 480 31.469 59.940 25.175 -/- 640 x 480 37.861 72.809 31.500 -/- 640 x 480 37.500 75.000 31.500 -/- 800 x 600 37.879 60.317 40.000 +/+ 800 x 600 48.077 72.188 50.000 +/+ 800 x 600 46.875 75.000 49.500 +/+ 1024 x 768 48.363 60.004 65.000 -/- 1024 x 768 56.476 70.069 75.000 -/- 1024 x 768 60.023 75.029 78.750 +/+ 1152 x 864 67.500 75.000 108.000 +/+ 1280 x 720 45.000 60.000 74.250 +/+ 1280 x 800 49.702 59.810 83.500 -/+ 1280 x 1024 63.981 60.020 108.000 +/+ 1280 x 1024 79.976 75.025 135.000 +/+ 1366 x 768 47.712 59.790 85.500 +/+ 1440 x 900 55.935 59.887 106.500 -/+ 1600 x 900RB 60.000 60.000 108.000 +/+ 1680 x 1050 65.290 59.954 146.250 -/+ 1920 x 1080 67.500 60.000 148.500 +/+ [PE530-XNZF]BN68-04068E.indb 13 2012-02-15 �� 1:45:14 LED TV MONITOR (MFM TV) user manual Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register TB300 TB350English 2 Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Digital LED display notice 1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal. 2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast transmission of digital LED display over cable. 3. Although this LED display set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed. 4. Depending on the countries/areas where this LED display set is used some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business. 5. Some Digital LED display functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers. 6. For more information, please contact your local Samsung customer care centre. ✎ The reception quality of LED display may be affected due to differences in broadcasting method between the countries. Please check the LED display performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconfiguring LED display setting or not. Still image warning Avoid displaying still images (like jpeg picture files) or still image element (like LED display programme logo, panorama or 4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations: • Avoid displaying the same LED display channel for long periods. • Always try do display any image on full screen, use LED display set picture format menu for best possible match. • Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process. • Frequently use all LED display features designed to reduce image retention and screen burnout, refer to proper user manual section for details. Securing the Installation Space Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product. ✎ The actual appearance of the LED display may differ from the images in this manual, depending on the model. ✎ Be careful when you touch the LED display. Some parts can be somewhat hot. Installation with a stand. Installation with a wall-mount. • An administration fee may be charged if either – (a) an engineer is called out at your request and there is no defect in the product (i.e. where you have failed to read this user manual). – (b) you bring the unit to a repair centre and there is no defect in the product (i.e. where you have failed to read this user manual). • The amount of such administration charge will be advised to you before any work or home visit is carried out. 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm3 ENGLISH English Check the Symbol! This function can be used by pressing the t TOOLST button on the remote control. Note Indicates additional information. Contents Getting Started 4 4 Safety Precautions 11 Accessories 12 Viewing the Control Panel 13 Viewing the Remote Control Connections 14 14 Connecting to an Antenna 14 Setup (Initial Setup) 15 Connecting to an AV Device 16 Connecting to a COMMON INTERFACE slot 17 Connecting to a Audio device and PC 19 Changing the Input Source Basic Features 19 19 How to Navigate Menus 20 Using the INFO button (Now & Next guide) 20 Using the Channel Menu 22 Channel Menu 23 Picture Menu 25 Sound Menu 27 System Menu 30 Support Menu Advanced Features 31 31 Using the Media Play Other Information 38 38 Analogue Channel Teletext Feature 39 Attaching a Wall Mount/Desktop Stand 40 Anti-theft Kensington Lock 41 Troubleshooting 45 Specifications4 Getting Started English Safety Precautions Icons used for safety precautions WARNING Failing to follow the precautions marked with this sign may result in a serious injury or even a fatality. CAUTION Failing to follow the precautions marked with this sign may result in a personal injury or property damage. Do not perform. Must be followed. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product. ¦ Power Related ✎ The following images are for your reference and may differ depending on models and countries. Warning Avoid using a damaged power cord or plug or a loose power outlet. x Otherwise, it may result in electric shock or fire. Avoid connecting multiple electric appliances to a single wall outlet. x Otherwise, it may result in fire due to overheating of the wall outlet. Avoid plugging in or unplugging the power supply with wet hands. x Otherwise, it may result in electric shock. ! Plug the power plug in firmly. x Otherwise, it may result in fire. ! Make sure to connect the power cord to a grounded wall outlet (for insulation class 1 equipment only). x Otherwise, it may result in electric shock or injury. Avoid bending or twisting the power cord excessively and avoid placing heavy objects on the cord. x Otherwise, it may result in electric shock or fire due to a damaged power cord. Getting Started5 Getting Started English Keep the power cord and the product away from a heater. x Otherwise, it may result in electric shock or fire. ! If the pins of the power plug or the wall outlet are covered in dust, clean it using a dry cloth. x Otherwise, it may result in fire. Caution Avoid unplugging the power plug while the product is operating. x Otherwise, it may damage the product due to electric shock. ! Make sure to use only the power cord supplied by our company. In addition, do not use the power cord of another electric appliance. x Otherwise, it may result in electric shock or fire. ! When unplugging the power plug from the wall outlet, make sure to hold it by the plug and not by the cord. x Otherwise, it may result in electric shock or fire. ! Connect the power plug to a wall outlet that can be easily reached. x When a problem occurs with the product, you must unplug the power plug to cut the power off completely. You cannot cut the power off completely using only the power button on the product. ¦ Installation Related Warning Avoid placing burning candles, mosquitorepellentor cigarettes on the product. x Otherwise, it may result in fire. ! Ask an installation engineer or relevant company to install the product onto the wall. x Otherwise, it may result in injury. x Make sure to use the specified wall mount. Avoid installing the product in a badly-ventilated location such as inside a bookshelf or closet. x Otherwise, it may result in fire due to internal over-heating. ! Keep the plastic bags used to pack the product away from children. x If children place the plastic bags over their heads, they may suffocate. Avoid installing the product in a location that is unstable or exposed to excessive vibration such as on an unstable or slanted shelf. x The product may fall and this may result in damage to the product or injury. x If you use the product in a location exposed to excessive vibrations, it may result in a problem with the product or fire. ! Avoid installing the product in a location exposed to dust, moisture (sauna), oil, smoke or water (rain drops) and installing it within a vehicle. x This may result in electric shock or fire.6 Getting Started English Avoid installing the product in a location exposed to direct sunlight and installing the product near a heat source such as a fireplace or heater. x This may shorten the product life cycle or cause fire. Avoid installing the product where children may reach it. x If a child touches the product, the product may fall and this may result in injury. x Since the front part is heavier, install the product on a flat and stable surface. ! Bend the outdoor antenna cable downwards at the location where it comes in the house so that rainwater does not flow in. x If rainwater enters the product, it may result in electric shock or fire. ! Install the antenna far away from any high voltage cables. x If the antenna touches or falls onto a high voltage cable, it may result in electric shock or fire. Caution ! Do not let the product drop while moving it. x This may result in a problem with the product or injury. Do not place the product face down on the floor. x This may damage the panel of the product. When installing the product on a console or shelf, make sure that the front of the product does not protrude out of the console or shelf. x Otherwise, this may cause the product to fall off and result in a malfunction or injury. x Make sure to use a cabinet or shelf suitable to the size of the product. ! When putting the product down, handle it gently. x Otherwise, it may result in a problem with the product or injury. SAMSUNG ! If the product is installed in a location where the operating conditions vary considerably, a serious quality problem may occur due to the surrounding environment. In this case, install the product only after consulting one of our service engineers about the matter. x Places exposed to microscopic dust, chemicals, too high or low temperature, high humidity, airports or stations where the product is continuously used.7 Getting Started English ¦ Cleaning Related Warning ! Before cleaning the product, unplug the power cord. x Otherwise, it may result in electric shock or fire. When cleaning the product, do not spray water directly over the product parts. x Make sure that water does not enter the product. x Otherwise, it may result in fire, electric shock or a problem with the product. Caution Avoid spraying cleansing agent directly onto the product. x This may result in discoloration or cracking of the exterior of the product or the panel coming off. ! When cleaning the product, disconnect the power cord and clean the product with the supplied cleaning cloth. x Avoid using chemicals such as wax, benzene, alcohol, thinner, mosquitorepellent, fragrance, lubrication or cleansing agent when cleaning the product.  This may result in the exterior being deformed or the print being removed. ! If you can't get the product clean with just the supplied cloth, use a soft, damp cloth with a "monitorexclusive cleansing agent" and wipe the product with it. x If no monitor-exclusive cleansing agent is available, dilute a cleansing agent with water at a ratio of 1:10 before cleaning the product. ! Since the exterior of the product is easily scratched, be sure to use the supplied cleansing cloth. ¦ Usage Related Warning Since a high voltage runs through the product, never disassemble, repair or modify the product yourself. x Otherwise, it may result in fire or electric shock. x If the product needs to be fixed, contact a service centre. ! To move the product, turn the power off and unplug the power cord, the antenna cable and any other wires connected to the product. x Otherwise, it may result in electric shock or fire due to the damaged power cord.8 Getting Started English ! If the product generates a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact a service centre. x Otherwise, it may result in electric shock or fire. Avoid letting children hang or climb onto the product. x Otherwise, it may result in the product falling and this may result in injury or death. If you drop the product or the case is damaged, turn the power off and unplug the power cord. Contact a service centre. x Otherwise, it may result in fire or electric shock. Avoid placing objects such as toys and cookies on top of the product. x If a child hangs over the product to grab an object, the object or the product may fall and this may result in injury or even death. ! When thunder or lighting occurs, unplug the power cord and under no circumstance touch the antenna cable as this is dangerous. x Otherwise, it may result in electric shock or fire. ! Avoid dropping an object over the product or cause impact to the product. x Otherwise, it may result in electric shock or fire. Avoid moving the product by pulling the power cord or antenna cable. x Otherwise, it may result in electric shock, fire or a problem with the product due to damage to the cable. ! GAS When a gas leak occurs, do not touch the product or the power plug and ventilate immediately. x A spark may result in an explosion or fire. x During a thunder or lighting storm, do not touch the power cord or antenna cable. Avoid lifting up or moving the product by holding only the power cord or signal cable. x Otherwise, it may result in electric shock, fire or a problem with the product due to damage to the cable. ! Avoid using or placing inflammable spray or objects near the product. x This may result in an explosion or fire. Take care not to block the vent by a table cloth or curtain. x Otherwise, it may result in fire due to internal overheating. 100 Avoid inserting metal objects such as a chopsticks, coins or hairpins, or inflammable objects into the product (the vents, ports, etc). x If water or substances enters the product, turn the power off, unplug the power cord and contact a service centre. x Otherwise, it may result in a problem with the product, electric shock or fire.9 Getting Started English Avoid placing a liquid container such as a vase, flowerpot, beverage, cosmetics or drugs, or a metal object over the product. x If water or substances enter the product, turn the power off, unplug the power cord and contact a service centre. x Otherwise, it may result in a problem with the product, electric shock or fire. Do not press down hard on the product. The product may become deformed or damaged. Caution ! Displaying a still image for a long time may create a persistent image or stain on the screen. x If you do not use the product for a long time, use the power-saving mode or set the screensaver to the moving picture mode. -_- ! When not using the product for a long time such as leaving your home, unplug the power cord from the wall outlet. x Otherwise, it may cause dust accumulation and result in fire caused by overheating or short circuit or result in an electric shock. ! Set the appropriate resolution and frequency for the product. x Otherwise, it may result in eye strain. Avoid turning the product upside down or move the product holding only the stand. x This may cause the product to fall, resulting in damage to the product or injury. ! Watching the product from too close a distance continuously may damage your eyesight. Avoid using a humidifier or cooker near the product. x Otherwise, it may result in electric shock or fire. ! It is important to give your eyes some rest (5 minutes every hour) when viewing the product screen for long periods of time. x This will alleviate any eye strain. Since the display panel is hot after using it for a long time, do not touch the product.10 Getting Started English ! Keep the small accessories in a location out of the reach of children. ! Take care when adjusting the angle of the product or the height of the stand. x If your hand or finger is caught, you may be injured. x If the product is tilted excessively, the product may fall and this may result in injury. Avoid placing a heavy object over the product. x Otherwise, it may result in a problem with the product or injury. When using headphones or earphones, do not turn the volume too high. x Having the sound too loud may damage your hearing. Be careful that children do not place the batteries in their mouths when removed from the remote control. Place the battery in a location that children or infants cannot reach. x If children have had the battery in their mouths, consult your doctor immediately. ! When replacing the batteries, insert them with right polarity (+, -). x Otherwise, the battery may become damaged or it may cause fire, personal injury or damage due to leakage of the internal liquid. Use only specified standard batteries. Do not use new and used batteries together. x This may cause a battery to break or leak and may cause fire, injury, or contamination (damage). ! The batteries (and rechargeable batteries) are not ordinary refuse and must be returned for recycling purposes. The customer is responsible for returning the used or rechargeable batteries for recycling. x The customer can return used or rechargeable batteries to a nearby public recycling centre or to a store selling the same type of the battery or rechargeable battery.11 Getting Started English Accessories ✎Please make sure the following items are included with your LED display. If any items are missing, contact your dealer. ✎The items’ colours and shapes may vary depending on the models. ✎Cables not included in the package contents can be purchased separately. ✎Check that there is no accessory hidden behind packing materials when you open the box. [CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET x User Manual x Quick Setup Guide x Remote Control & Batteries (AAA x 2) x Cleaning Cloth x Warranty Card / Safety Guide (Not available in some locations) x Power Cord y Stand Connector y Stand Base y D-Sub Cable y Stereo Cable Input Cables (Sold Separately) y HDMI to DVI Cable y Audio Cable y Component Cable y Optical Cable y HDMI Cable12 Getting Started English Viewing the Control Panel ✎The product colour and shape may vary depending on the model. SOURCE E Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control. MENU Displays an on-screen menu, the OSD (on screen display) of your LED display's features. Y Adjusts the volume. In the OSD, use the Y buttons as you would use the l and r z buttons on the remote control. Changes the channels. In the OSD, use the z buttons as you would use the u and d buttons on the remote control. P (Power) Turns the LED display on or off. Power Indicator Blinks and turns off when the power is on and lights up in standby mode. Remote control sensor Aim the remote control towards this spot on the LED display. Standby mode Do not leave your LED display in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord. Control Panel13 Getting Started English Viewing the Remote Control ✎This is a special remote control for the visually impaired and has Braille points on the Channel and Number buttons. Installing batteries (Battery size: AAA) Turns the TV on and off. Have direct access to channels. Alternately select Teletext ON, Double, Mix or OFF. Displays the Content Home, which includes Channel List, Guide, Media Play, Schedule Manager, and Source. Quickly select frequently used functions. Displays the main on-screen menu. Returns to the previous menu. PIP: Turns the PIP on or off. P.SIZE: Selects the Picture Size. AD/SUBT.: Turns the audio description on and off (not available in some locations). / Displays digital subtitles. Move the cursor and select an item. Confirm the setting. Use these buttons according to the direction on screen. Adjusts the volume. Displays and selects the available video sources. Returns to the previous channel. Cuts off the sound temporarily. Displays channel lists on the screen. Displays the EPG (Electronic Programme Guide). Displays information on the TV screen. Exits the menu. Using these buttons in Media Play mode. Changes channels.Connections Connecting to an Antenna When the LED display is initially powered on, basic settings proceed automatically. ✎Preset: Connecting the mains and antenna. ANT OUT Power Input Setup (Initial Setup) English 14 When the LED display is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERP button. Setup is available only when the Input Source is set to TV. ✎Before turning on the LED display, make sure the antenna cable is connected. 1 Selecting a menu language Press the u or d button to select a menu language. Press ENTERE button 2 or Selecting Home Use Store Demo twice when done. Press the x Select the u or Home Use d button, then press the mode. Store Demo ENTER Mode is for retail environments. E button. P x To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the LED display. When you see the volume OSD, press and hold MENU for 5 sec. x Store Demo is only for shop display. If you select it, several functions are not able to use. Please select Home Use when you watch at home. 3 Selecting an area Press the ENTERE button. Select the appropriate area by pressing the u or d button. Press the ENTERE button to confirm your choice. 4 Auto Tuning Press the u or d button to select correct option, and then press ENTERE button twice. Let’s find and store channels on your TV. Do you need to search for channels? x Yes, I need to. All the channels available will be found and stored on your TV. (Auto Tuning necessary) x No, I don’t need to. My set-top box provides all the channels that are available, so I don't need to search for channels. ✎ You can complete Setup by selecting it. x Air / Cable: Select the antenna source to memorise. Digital & Analogue / Digital / Analogue: Select the channel source to memorise. ✎ You can check more details on page22. 5 Setting the Clock Mode Set the Clock Mode automatically or manually. x Auto: Select the time zone (depending on the country) where you are located. x Manual: Allows you to manually set the current date and time. ✎ If the customer chooses "No, I don’t need to." in step 4, the clock just can be set manually. 6 Complete Press the ENTERE button. If You Want to Reset This Feature... Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to change the PIN number, use the Change PIN function. You should do Setup (MENU → System) again at home although you did in shop. ✎If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0”: POWER (off) → MUTE → 8 → 2 → 4 → POWER (on).English 15 Connections Connecting to an AV Device Using an HDMI or an HDMI to DVI cable (up to 1080p) Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, VCR ✎HDMI IN(DVI) / PC/DVI AUDIO IN x If an HDMI to DVI cable is connected to the HDMI IN(DVI) port, the audio does not work. x The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version of HDMI mode is connected to the LED display. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade. x Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur. x A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the ethernet function via HDMI. Using a Scart Cable Available devices: DVD, VCR ✎In Ext. mode, DTV Out supports MPEG SD Video and Audio only. DVI OUT HDMI OUT AUDIO OUT W R DVD / Blu-ray player DVD / Blu-ray player EXT (RGB) EXT VCR / DVDEnglish 16 Connections Using a Component (up to 1080p) or Audio/Video (480i only) Cable Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR PR PB COMPONENT / AV IN R W R AUDIO OUT R-AUDIO-L VIDEO OUT R W R B G R W R B G R W W W R B R R G Y Y AUDIO OUT R-AUDIO-L COMPONENT OUT PR PB Y R W Y ✎When connecting to AV IN, the colour of the AV IN [Y/VIDEO] jack (green) will not match the video cable (yellow). ✎For better picture quality, the Component connection is recommended over the A/V connection. Connecting to a COMMON INTERFACE slot (Just for Europe, Turkey,Algeria,South Africa, and CIS area) Using the “CI or CI+ CARD” To watch paid channels, the “CI or CI+ CARD” must be inserted. x If you don’t insert the “CI or CI+ CARD,” some channels will display the message “Scrambled Signal”. x The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. x When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated. ✎NOTE x You must obtain a “CI or CI+ CARD” from a local cable service provider. x When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it. x Insert the “CI or CI+ CARD” in the direction marked on the card. x The location of the COMMON INTERFACE slot may be different depending on the model. x “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. x If you have any problems, please contact a service provider. x Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen. Audio Cable (Not Supplied) Video Cable (Not Supplied) Audio Cable (Not Supplied) Red White Red Bule Green Red White Yellow Device Device Component Cable (Not Supplied)English 17 Connections Digital audio system Connecting to a Audio device and PC Using an Optical (Digital) or a Headphone Connection DIGITAL AUDIO OUT (OPTICAL) TB300 series have not headphone and Optical interface. ✎DIGITAL AUDIO OUT (OPTICAL) x When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the LED display and the system. x 5.1 CH (channel) audio is available when the LED display is connected to an external device supporting 5.1 CH. x When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre. ✎Headphones H: You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled. x Sound function may be restricted when connecting headphones to the LED display. x Headphone volume and LED display volume are adjusted separately. Using an HDMI cable or an HDMI to DVI cable or a D-sub cable ✎Connecting through the HDMI cable may not be supported depending on the PC. HDMI Cable (Not Supplied) HDMI to DVI (Not Supplied) Stereo Cable Stereo Cable D-Sub Cable English 18 Connections Display Modes (D-Sub and HDMI/DVI Input) Optimal resolution : 1366 x 768 pixels (T19B300 model only) Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity Mode Resolution (H/V) IBM 720 x 400 70Hz 31.469 70.087 28.322 -/+ VESA DMT 640 x 480 60Hz 31.469 59.940 25.175 -/- MAC 640 x 480 67Hz 35.000 66.667 30.240 -/- VESA DMT 640 x 480 72Hz 37.861 72.809 31.500 -/- VESA DMT 640 x 480 75Hz 37.500 75.000 31.500 -/- VESA DMT 800 x 600 60Hz 37.879 60.317 40.000 +/+ VESA DMT 800 x 600 72Hz 48.077 72.188 50.000 +/+ VESA DMT 800 x 600 75Hz 46.875 75.000 49.500 +/+ MAC 832 x 624 75Hz 49.726 74.551 57.284 -/- VESA DMT 1024 x 768 60Hz 48.363 60.004 65.000 -/- VESA DMT 1024 x 768 70Hz 56.476 70.069 75.000 -/- VESA DMT 1024 x 768 75Hz 60.023 75.029 78.750 +/+ VESA DMT 1280 x 720 60Hz 45.000 60.000 74.250 +/+ VESA DMT 1366 x 768 60Hz 47.712 59.790 85.500 +/+ Optimal resolution : 1920 x 1080 pixels Display Mode Horizontal Frequency (kHz) Vertical Frequency(Hz) Pixel Clock (MHz) Sync Polarity (H/V) Mode Resolution IBM 720 x 400 70Hz 31.469 70.087 28.322 -/+ VESA DMT 640 x 480 60Hz 31.469 59.940 25.175 -/- MAC 640 x 480 67Hz 35.000 66.667 30.240 -/- VESA DMT 640 x 480 72Hz 37.861 72.809 31.500 -/- VESA DMT 640 x 480 75Hz 37.500 75.000 31.500 -/- VESA DMT 800 x 600 60Hz 37.879 60.317 40.000 +/+ VESA DMT 800 x 600 72Hz 48.077 72.188 50.000 +/+ VESA DMT 800 x 600 75Hz 46.875 75.000 49.500 +/+ MAC 832 x 624 75Hz 49.726 74.551 57.284 -/- VESA DMT 1024 x 768 60Hz 48.363 60.004 65.000 -/- VESA DMT 1024 x 768 70Hz 56.476 70.069 75.000 -/- VESA DMT 1024 x 768 75Hz 60.023 75.029 78.750 +/+ VESA DMT 1152 x 864 75Hz 67.500 75.000 108.000 +/+ MAC 1152 x 870 75Hz 68.681 75.062 100.000 -/- VESA DMT 1280 x 720 60Hz 45.000 60.000 74.250 +/+ VESA DMT 1280 x 800 60Hz 49.702 59.810 83.500 -/+ VESA DMT 1280 x 1024 60Hz 63.981 60.020 108.000 +/+ VESA DMT 1280 x 1024 75Hz 79.976 75.025 135.000 +/+ VESA DMT 1366 x 768 60Hz 47.712 59.790 85.500 +/+ VESA DMT 1440 x 900 60Hz 55.935 59.887 106.500 -/+ VESA DMT 1600 x 900RB 60Hz 60.000 60.000 108.000 +/+ VESA DMT 1680 x 1050 60Hz 65.290 59.954 146.250 -/+ VESA DMT 1920 x 1080 60Hz 67.500 60.000 148.500 +/+ ✎NOTE x The interlace mode is not supported. x The set might operate abnormally if a non-standard video format is selected. x Separate and Composite modes are supported. SOG(Sync On Green) is not supported.English 19 Connections Basic Features How to Navigate Menus Before using the LED display, follow the steps below to learn how to navigate the menu and select and adjust different functions. 1 ENTERE / Direction button: Move the cursor and select an item. Confirm the setting. 2 RETURN button: Returns to the previous menu. 3 MENU button: Displays the main on-screen menu. 4 EXIT button: Exits the on-screen menu. How to Operate the OSD (On Screen Display) The access step may differ depending on the selected menu. 1 MENU m The main menu options appear on the screen: Picture, Sound, Channel, System, Support. 2 ▲ / ▼ Select an icon with the ▲ or ▼ button. 3 ENTERE Press ENTERE to access the sub-menu. 4 ▲ / ▼ Select the desired submenu with the ▲ or ▼ button. 5 ◄ / ► Adjust the value of an item with the ◄ or ► button. The adjustment in the OSD may differ depending on the selected menu. 6 ENTERE Press ENTERE to complete the configuration. 7 EXIT e Press EXIT. Changing the Input Source Source SOURCE s→ Source Use to select LED display or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver. ■ TV / Ext. / PC / HDMI/DVI / AV / Component ✎In the Source, connected inputs will be highlighted. ✎TV, PC and Ext. always stay activated. Edit Name SOURCEs→ TOOLST → Edit Name → ENTERE In the Source, press the TOOLST button, and then you can set an external input sources name you want. ■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier. ✎When connecting a PC to the HDMI IN (DVI) port with HDMI cable, you should set the LED display to PC mode under Edit Name. ✎When connecting a PC to the HDMI IN (DVI) port with HDMI to DVI cable, you should set the LED display to DVI PC mode under Edit Name. ✎When connecting an AV devices to the HDMI IN (DVI) port with HDMI to DVI cable, you should set the LED display to DVI Devices mode under Edit Name. Information SOURCEs→ TOOLST→ Information → ENTERE You can see detailed information about the selected external device. 2 4 3 1English 20 Basic Features Using the INFO button (Now & Next guide) The display identifies the current channel and the status of certain audio-video settings. The Now & Next guide shows daily LED display programme information for each channel according to the broadcasting time. x Scroll l / r to view information for a desired programme while watching the current channel. (Depending on the channels) x Scroll u / d to view information for other channels. If you want to move to the currently selected channel, press the ENTERE button. • The displayed image may differ depending on the model. No detailed information. No title 576i 4:3 SD Italian Stereo a Information 17.02 Tue 19 Jul DTV Air All Coming Soon 5 Using the Channel Menu Press the CONTENT button to select Contents Home, and then select the menu you want to use. Each screen will be displayed. • The displayed image may differ depending on the model. Contents Home Channel List Guide Media Play Schedule Manager Source R Return Guide CONTENT → Contents Home → Guide → ENTERE The EPG (Electronic Programme Guide) information is provided by broadcasters. Using programme schedules provided by broadcasters, you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time. Programme entries may appear blank or out of date depending on a channel status. Using Channel View x a Red (Sche. Mgr) : Displays the Schedule Manager. x b Green (-24 Hours): Viewing the list of programmes to be broadcasted before 24 hours. x { Yellow (+24 Hours): Viewing the list of programmes to be broadcasted after 24 hours. x } Blue (Ch. Mode): Select the type of channels you want to display on the Channel View window. x (Information): Displays details of the selected programme. x k (Page): Move to next or previous page. x E (Watch / Schedule) – When selecting the current programme, you can watch the selected programme. – When selecting the future programme, you can reserve to watch the selected programme. To cancel the schedule, press the ENTERE button again and select Cancel Schedule. Schedule Manager CONTENT → Contents Home → Schedule Manager → ENTERE You can view, modify or delete a channel you have reserved to watch. Using the Schedule Viewing You can set a desired channel to be displayed automatically at the intended time. Set the current time first to use this function. 1. Press the ENTERE button to select Schedule Manager. 2. Press the TOOLSTbutton or a button to add programme to schedule manually. The Schedule Viewing screen appears. 3. Press the u / d / l / r buttons to set the Aerial, Channel, Repeat, Date or Start Time. • The displayed image may differ depending on the model. IL MEDICO E LO STRGONE DTV Air 6 R4 DTT 16:55 - 17:55 IL MEDICO E LO STREGONE - 2 TEMPO a Sche. Mgr b -24 Hours { +24 Hours } Ch. Mode Information k Page E Watch Today 17:00 17:30 18:00 18:30 Guide 17:00 Tue 19 Jul Channel View - All No Information No Information No Information No Information IL MEDICO E LO STREGONE 1 1futech 2 24ore.tv 3 BBC World 4 Class News 5 Coming Soon 6 R4 DTT No Information TG 4 No Information 5 Coming SoonEnglish 21 Basic Features x Aerial: Select the desired antenna source. x Channel: Select the desired channel. x Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at your convenience. If you select Manual, you can set the day you want. ✎ The c mark indicates the date is selected. x Date: you can set desired date. ✎ It is available when you select Once in Repeat. x Start Time: You can set start time you want. ✎ On the Information screen, you can change or cancel a reserved information. x Cancel Schedule: Cancel a show you have reserved to watch. x Edit: Change a show you have reserved to watch. x Return: Return to the previous screen. Channel List CONTENT → Channel List → ENTERE You can view all the channel searched. • The displayed image may differ depending on the model. Channel List All 1 1futech 2 24ore.tv 3 BBC World 4 Class News 5 Coming Soon 6 R4 DTT IL MEDICO E LO STREGONE a1 C2 a2 C4 T Tools L Ch. Mode E Watch k Page ✎When you press the CH LIST button on the remote control, Channel List screen will be displayed at once. Using the operation buttons with the Channel List. ■ T (Tools): Press Tools button to check the following functions. x Programme View:Press the u/d buttons to select the desired programme, then press the ENTERE button. (Only for DIGITAL Channel) x Edit Favourites: Set channels you watch frequently as favourites. ✎ Select the Edit Favourites, then press the ENTERE button. – If the channel is already added to favourite channel, Edit Favourites will be shown. x Lock / Unlock: Lock a channel so that the channel cannot be selected and viewed. ✎ This function is available only when the Channel Lock is set to On. ✎ The PIN input screen appears. Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option. x Edit Channel Name (Only for Analogue channels): Assign your own channel name. ✎ This function may not support depending on the region. x Edit Channel Number: Edit the number by pressing the number buttons desired. ✎ This function may not support depending on the region. x Delete: You can delete a channel to display the channels you want. x Information: Display the channel name, resolution, picture mode, language and so on.(Some just available for DTV) x Sort: Change the list ordered by channel name or channel number. (Only for DIGITAL Channel) x Change antenna: Switches to Air or Cable. x Edit Mode: You can select desired channels and edit it. ■ l r (Ch. Mode): Move to the type of channels you want to display on the Channel List screen. ✎ The option may differ depending on country. ■ E (Watch / Information): Watches the channel you select. / Displays details of the selected programme. ■ k (Page): Move to next or previous page. How to use Schedule Viewing in Channel List (Depending on the channels) When you set the Schedule Viewing in Channel List, you can only set the programme in Programme View. 1. Press the CH LIST button, then select a desired digital channel. 2. Press the TOOLST button and select Programme View. 3. Press the u / d buttons to select the desired programme, then press the E (Information) button. 4. Select Schedule Viewing, then press the ENTERE button when done. ✎If you want to cancel Schedule Viewing, follow steps 1 through 3. Select Cancel Schedule.English 22 Basic Features Channel Menu ¦ Retuning Channels MENUm→ Channel → ENTERE Before your television can begin memorizing the available Aerial (Air / Cable)t channels, you must specify the type of signal source that is connected to the LED display. Country (depending on the country) The PIN input screen appears. Enter your 4 digit PIN number. ✎Select your country so that the LED display can correctly auto-tune the broadcasting channels. ■ Digital Channel: Change the country for digital channels. ■ Analogue Channel: Change the country for analogue channels. Auto Tuning (depending on the country) ✎Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the Channel Lock function, the PIN input window appears. ■ Auto Tuning – Air / Cable: Select the antenna source to memorise. Digital & Analogue / Digital / Analogue: Select the channel source to memorise. ✎ When selecting Cable → Digital & Analogue or Digital: Provide a value to scan for cable channels. x Search Mode(Full / Network / Quick): Selects the Search Mode settings among Full / Network / Quick. x Network (Auto / Manual): Selects the Network ID setting mode among Auto or Manual. x Network ID: When Network is Manual, you can set up Network ID using the numeric buttons. x Frequency: Displays the frequency for the channel. (differs in each country) x Modulation: Displays available modulation values. x Symbol Rate: Displays available symbol rates. ■ Cable Search Option (depending on the country) Sets additional search options such as the frequency and symbol rate for a cable network search. – Start Frequency / Stop Frequency: Set the start or stop frequency (differs in each country). – Symbol Rate: Displays available symbol rates. – Modulation: Displays available modulation values. Manual Tuning Scans for a channel manually and stores in the LED display. ✎If a channel is locked using the Channel Lock function, the PIN input window appears. ■ Digital Channel Tuning: Scans for a digital channel. 1. Press the ENTERE button to select New. ✎ When selecting Aerial → Air: Channel, Frequency, Bandwidth ✎ When selecting Aerial → Cable: Frequency, Modulation, Symbol Rate 2. Press the d button to select Search. When scanning has finnished, a channel is updated in the channel list. ■ Analogue Channel Tuning: Scans for a analogue channel. 1. Press the ENTERE button to select New. 2. Set the Programme, Colour System, Sound System, Channel and Search. 3. Press the d button to select Store. When scanning has finnished, a channel is updated in the channel list. Transfer Channel List The PIN input screen appears. Enter your 4 digit PIN number. Imports or exports the channel map. You should connect a USB storage to use this function. ■ Import from USB: Import channel list from USB. ■ Export to USB: Export channel list to USB. This function is available when USB is connected. ✎USB format should be FAT32. Fine Tune (analogue channels only) If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear. ✎Settings are applied to the channel you’re currently watching. ✎Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner ✎To reset the fine-tuning, select Reset.English 23 Basic Features Picture Menu ¦ Changing the Preset Picture Mode MENUm→ Picture → Picture Mode → ENTERE Select your preferred picture type. Picture Mode t ✎When connecting a PC, the Picture Mode is only available the Standard and Entertain. ■ Dynamic: Suitable for a bright room. ■ Standard: Suitable for a normal environment. ■ Movie: Suitable for watching movies in a dark room. ■ Entertain: Suitable for watching movies and games. ✎ It is only available when connecting a PC. ¦ Adjusting Picture Settings MENUm→ Picture → ENTERE Samsung MagicAngle Adjust screen viewing Angle to optimize screen quality according to your viewing position. ■ Samsung MagicAngle: When viewing the screen at an angle from below or above by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front. x Off: Select when viewing from the front position. x Lean back mode: Select when viewing from a slightly lower position. x Standing Mode: Select when viewing from the upper position. ■ Mode: Adjust screen viewing angle. ✎When Samsung MagicAngle is set to Lean back mode or Standing Mode, Gamma is not available. Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R) Your television has several setting options for picture quality control. ✎NOTE x In analogue TV, PC, AV modes of the PAL system, the Tint (G/R) function is not available. x When connecting a PC, you can only make changes to Backlight, Contrast, Brightness and Sharpness. x Settings can be adjusted and stored for each external device connected to the LED display. x Lowering picture brightness reduces power consumption. Screen Adjustment ■ Picture Size: Your cable box / satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time. Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio. 16:9: Sets the picture to 16:9 wide mode. Wide Zoom: Magnifies the picture size more than 4:3. ✎ Adjusts the Position by using u / d buttons. Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size. ✎ Adjusts the Zoom or Position by using u / d button. 4:3: Sets the picture to basic (4:3) mode. ✎ Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention (screen burn) which are not covered by the warranty. Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (720p / 1080i / 1080p) signals are inputted. ✎ Adjusts the Position by using u / d / l / r button. ✎NOTE x Depending on the input source, the picture size options may vary. x The available items may differ depending on the selected mode. x When connecting a PC, only 16:9 and 4:3 modes can be adjusted. x Settings can be adjusted and stored for each external device connected to an input on the LED display. x If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function. ■ Zoom / Position:You can adjust picture size and position by u / d / l / r button. ✎ It's only available when picture size is set as Zoom and Wide Zoom. ✎ In Wide Zoom mode, you can only use Position adjustment. ✎ Reset: Reset the Zoom and Position to the default settings. ■ 4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size. ✎ Not available in HDMI , Component, and HDMI/DVI mode.English 24 Basic Features ■ PC Screen Adjustment ✎ Available only PC mode. x Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust the picture so that it is aligned to the centre of screen. x Position: Adjusts the PC screen position with direction button (u / d / l / r). x Image Reset: Resets the image to default settings. Frequency values / position and fine tune are adjusted Auto Adjustmentt automatically. ✎It's only available in PC mode. Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card, the actual screens on your PC may differ in which case the same basic set-up information will almost always be applied. (If not, contact your computer manufacturer or Samsung Dealer.) 1. Click on “Control Panel” on the Windows start menu. 2. Click on “Appearance and Themes” in the “Control Panel” window and a display dialog-box will appear. 3. Click on “Display” and a display dialog box will appear. 4. Navigate to the “Settings” tab on the display dialog-box. x The correct size setting (resolution) [Optimum: 1920 x 1080 pixels]. (T19B300: 1366 x 768 pixels) x If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box. Maintaining the Correct Posture when Using this Product Maintain the correct posture when using this product. x Straighten your back. x Keep a distance of 45~50 cm (15~19 inches) from your eyes to the screen. Look down at the screen and face the screen forwards. x Adjust the angle of the product so that light is not reflected onto the screen. x Keep your elbow at a right angle and keep your arm level with the back of your hand. x Keep your elbow at a right angle. x Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or higher and maintain the position of your arm so that your arm is below your heart. ¦ Changing the Picture Options Advanced Settings MENUm→ Picture → Advanced Settings → ENTERE (Advanced Settings are available in Standard / Movie mode) Compared to previous models, new Samsung LED display have a more precise picture. ✎When connecting a PC, you can only make changes to White Balance. Advanced Settings RGB Only Mode Off Colour Space Native White Balance Gamma 0 Dynamic Contrast High Black Tone Off Flesh Tone 0 ■ Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast. ■ Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth. ■ Flesh Tone: Emphasize pink “Flesh Tone.” ■ RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and Blue colour for making fine adjustments to the hue and saturation. ■ Colour Space (Auto / Native): Adjust the range of colours available to create the image. ■ White Balance: Adjust the colour temperature for a more natural picture. R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) darkness. R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness. Reset: Resets the White Balance to it’s default settings. ■ Gamma: Adjust the primary colour intensity. ■ Motion Lighting (Off / On): Reduce power consumption by brightness control.English 25 Basic Features Picture Options MENUm→ Picture → Picture Options → ENTERE ✎When connecting a PC, you can only make changes to the Colour Tone. Picture Options Colour Tone Standard Digital Noise Filter Auto MPEG Noise Filter Auto HDMI Black Level Low Film Mode Off ■ Colour Tone (Cool / Standard / Warm1 / Warm2) ✎ Warm1 or Warm2 will be deactivated when the picture mode is Dynamic. ✎ Settings can be adjusted and stored for each external device connected to an input on the LED display. ■ Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation): If the broadcast signal received by your LED display is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen. ✎ When the signal is weak, try other options until the best picture is displayed. Auto Visualisation: When changing analogue channels, displays signal strength. ✎ Only available for analogue channels. ✎ When bar is green, you are receiving the best possible signal. ■ MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality. ■ HDMI Black Level (Low / Normal): Selects the black level on the screen to adjust the screen depth. ✎ Available only in HDMI mode (RGB signals). ■ Film Mode (Off / Auto1 / Auto2): Sets the LED display to automatically sense and process film signals from all sources and adjust the picture for optimum quality. ✎ Available in TV mode, HDMI (1080i). ✎ If the screen does not seem natural, change its option to Off / Auto1 / Auto2 in Film Mode. Reset Picture (Yes / No) Resets your current picture mode to its default settings. Sound Menu ¦ Changing the Preset Sound Mode MENUm→ Sound → Sound Mode → ENTERE Sound Mode t ■ Standard: Selects the normal sound mode. ■ Music: Emphasizes music over voices. ■ Movie: Provides the best sound for movies. ■ Clear Voice: Emphasizes voices over other sounds. ■ Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired. ✎If Speaker Select is set to External Speaker , Sound Mode is disabled. ¦ Adjusting Sound Settings Sound Effect MENUm→ Sound → Sound Effect → ENTERE (standard sound mode only)  This function provides a virtual 5.1 channel surround sound ■ SRS TruSurround HD(Off / On) t experience through a pair of speakers using HRTF (Head Related Transfer Function) technology. ■ SRS TruDialog (Off / On)  This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly. ■ Equalizer  Adjusts the sound mode. – Balance L/R: Adjusts the balance between the right and left speaker. 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies. – Reset: Resets the equaliser to its default settings.English 26 Basic Features ¦ Sound Systems, Etc. MENUm→ Sound → ENTERE Broadcast Audio Options ■ Audio Language  (digital channels only)  Change the default value for audio languages. ✎ The available language may differ depending on the broadcast. ■ Audio Format  (digital channels only)  Select the audio format. ■ Audio Description  (not available in all locations) (digital channels only)  This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster. ✎ Audio Description (Off / On): Turn the audio description function on or off. ✎ Volume: Adjust the audio description volume. Additional Settings (digital channels only) ■ DTV Audio Level (MPEG / HE-AAC): This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level. ✎ According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB. ✎ To increase or decrease the volume, adjust between the range 0 and -10 respectively. ■ SPDIF Output: SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player. – Audio Format: You can select the Digital Audio output (SPDIF) format. ✎ The available Digital Audio output (SPDIF) format may differ depending on the input source. – Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms). ✎ It's not available for TB300 series. ■ Dolby Digital Comp (Line / RF): This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound). ✎ Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time. Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB. RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB. Speaker Settings ■ Speaker Select (External Speaker / TV Speaker):A sound echo may occur due to a difference indecoding speed between the main speaker and theaudio receiver. In this case, set the TV to External Speaker. ✎ When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited. ✎ When Speaker Select is set to External Speaker. x TV Speaker: Off, External Speaker: On ✎ When Speaker Select is set to TV Speaker. x TV Speaker: On, External Speaker: On ✎ If there is no video signal, both speakers will be mute. ✎ It's not available for TB300 series. ■ Auto Volume (Off / Normal / Night): To equalize the volume level on each channel, set to Normal. Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night. Reset Sound (Yes / No) Reset all sound settings to the factory defaults. ¦ Selecting the Sound Mode t When you set to Dual fg, the current sound mode is displayed on the screen. Audio Type Dual f-g Default A2 Stereo Mono Mono Automatic Stereo Stereo ↔ Mono change Dual Dual f ↔ Dual g Dual f NICAM Stereo Mono Mono Automatic Stereo Mono ↔ Stereo change Dual Mono ↔ Dual f  Dual g  Dual f ✎If the Stereo signal is weak and an automatic switching, occurs, then switch to the Mono. ✎Only activated in stereo sound signal. ✎Only available when the input Source is set to TV.English 27 Basic Features System Menu ¦ Setting the Time MENUm→ System → ENTERE Time ■ Clock: Setting the clock is for using various timer features of the LED display. ✎ The current time will appear every time you press the INFO button. ✎ If you disconnect the power cord, you have to set the clock again. Clock Mode (Auto / Manual) x Auto: Set the current time automatically using the time from a digital channel. ✎ The antenna must be connected in order to set the time automatically. x Manual: Set the current time manually. ✎ Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually. Clock Set: Set the Day, Month, Year, Hour and Minute manually. ✎ Available only when Clock Mode is set to Manual. ✎ You can set the Day, Month, Year, Hour and Minute directly by pressing the number buttons on the remote control. Time Zone (Auto / Manual) (depending on the country): Select your time zone. ✎ This function is only available when the Clock Mode is set to Auto. – GMT(GMT-3:00~GMT-1:00 / GMT / GMT+1:00~GMT+ 12:00): Selects your time zone. ✎ This function is only available when the Time Zone is set to Manual. – DST(Daylight Saving Time) (Off / On): Switches the Daylight Saving Time function on or of off. ✎ This function is only available when the Time Zone is set to Manual. Using the Sleep Timer ■ Sleep Timer t: Automatically shuts off the LED display after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes). ✎ To cancel Sleep Timer, select Off. Setting the On / Off Timer ■ On Timer On Timer 1 / On Timer 2 / On Timer 3: Three different on timer settings can be made. You must set the clock first. On Timer 1 Setup Off Time 0:00 Volume 20 Source TV Aerial DTV Channel 1 Sun Mon Tue Wed Thu Fri Sat R Return Close Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select Manual, you can set up the day you want to activate the timer. ✎ The c mark indicates the day you've selected. Time: Set the hour and minute. Volume: Set the desired volume level. Source: Select a desired input source when the LED display is turned on automatically. (USB can be selected only when a USB device is connected to the LED display) Aerial (when the Source is set to TV): Select ATV or DTV. Channel (when the Source is set to TV): Select the desired channel. Music / Photo (when the Source is set to USB): Select a folder in the USB device containing music or photo files to be played when the LED display is turned on automatically. ✎ NOTE x If there is no music file on the USB device or the folder containing a music file is not selected, the Timer function does not operate correctly. x When there is only one photo file in the USB, the Slide Show will not play. x If a folder name is too long, the folder cannot be selected. x Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folders assigned to each USB have different names. x It is recommended that you use a USB memory stick and a multi card reader when using On Timer. x The On Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by some manufacturers because these devices take a long time to be recognized.English 28 Basic Features ■ Off Timer Off Timer 1 / Off Timer 2 / Off Timer 3: Three different off timer settings can be made. You must set the clock first. Off Timer 1 Setup Off Time 0:00 Sun Mon Tue Wed Thu Fri Sat R Return Close Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select Manual, you can set up the day you want to activate the timer. ✎ The c mark indicates the day you've selected. Time: Set the hour and minute. ¦ Locking Programmes MENUm→ System → Security → ENTERE Security ✎The PIN input screen appears before the setup screen. ✎Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option. ■ Channel Lock (Off / On): Lock channels in Channel Manager, to prevent unauthorized users, such as children, from watching unsuitable programme. ✎ Available only when the input Source is set to TV. ■ Program Rating Lock (depending on the country): Prevent unauthorized users, such as children, from watching unsuitable programme with a user-defined 4-digit PIN code. If selected channel is locked, the “\” symbol will be displayed. ✎ The items of Program Rating Lock differs depending on the country. ■ Change PIN: The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them. Change your personal ID number required to set up the LED display. Re-enter the same 4 digits. When the Confirm screen disappears, your PIN has been memorised. ¦ Economical Solutions MENUm→ System → Eco Solution → ENTERE Eco Solution ■ tEnergy Saving (Off / Low / Medium / High / Picture Off) : This adjusts the brightness of the LED display in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen. ■ No-Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid unnecessary energy consumption, set how long you want the LED display to remain on if it’s not receiving a signal. ✎ Disabled when the PC is in power saving mode. ■ Auto Power Off (Off / On): Saves power by turning LED display off automatically when no user operation is received for 4 hours. ¦ Other Features MENUm→ System → ENTERE Language ■ Menu Language: Set the menu language. ■ Teletext Language: Set a desired language for teletext. ✎ English is the default in cases where the selected language is unavailable in the broadcast. ■ Preferred Language (Primary Audio / Secondary Audio / Primary Subtitle / Secondary Subtitle): Select a language, which will be the default language when a channel is selected. Subtitle Use this menu to set the Subtitle mode. ■ Subtitle (Off / On): Switches subtitles on or off. ■ Subtitle Mode (Normal / Hearing Impaired): Sets the subtitle mode. ■ Subtitle Language: Sets the subtitle language. ✎ If the programme you are watching does not support the Hearing Impaired function, Preferred automatically activates even if the Hearing Impaired mode is selected. ✎ English is the default in cases where the selected language is unavailable in the broadcast.English 29 Basic Features Digital Text (Disable / Enable) (UK only) If the programme broadcasts with digital text, this feature is enabled. Auto Protection Time ■ Off / 2 hours / 4 hours / 8 hours / 10 hours: If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen. General ■ Max. Power Saving (Off / On): Turn off PC monitor when PC is not used for certain length of time to reduce power consumption. ■ Game Mode (Off / On): When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode. ✎NOTE x Precautions and limitations for game mode – To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu. – If you display the LED display menu in Game Mode, the screen shakes slightly. x Game Mode is not available when the input source is set to TV or PC. x After connecting the game console, set Game Mode to On. Unfortunately, you may notice reduced picture quality. x If Game Mode is On: – Picture mode is set to Standard and Sound mode is set to Movie. ■ Panel Lock (Off / On): Lock or unlock all the keys on the front panel at once. When Panel Lock is on, none of the keys on the front panel operate. ■ Boot Logo (Off / On): Display Samsung logo when the LED display is turned on. Common Interface ■ CI Menu: This enables the user to select from the CAMprovided menu. Select the CI Menu based on the menu PC Card. ■ Application Info: View information on the CAM inserted into the CI slot and on the “CI or CI+ CARD” which is inserted into the CAM. You can install the CAM anytime whether the LED display is on or off. 1. Purchase a CI CAM module at your nearest dealer or by phone. 2. Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the arrow. 3. Insert the CAM with the “CI or CI+ CARD” into the common interface slot, in the direction of the arrow so that it aligns parallel with the slot. 4. Check if you can see a picture on a scrambled signal channel. ¦ Picture In Picture (PIP) MENUm→ System → PIP → ENTERE You can watch the LED display tuner and one external video PIP t source simultaneously. PIP (Picture-in-Picture) does not function in the same mode. ✎NOTE x For PIP sound, refer to the Sound Select instructions. x If you turn the LED display off while watching in PIP mode, the PIP window will disappear. x You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke. x While Program Rating Lock is in operation, the PIP function cannot be used. x PIP settings Main picture Sub picture HDMI, HDMI(PC), Component, PC TV ■ PIP (Off / On): Activate or deactivate the PIP function. ■ Channel: Select the channel for the sub-screen. ■ Size (Õ / Ã): Select a size for the sub-picture. ■ Position (à / – / — / œ): Select a position for the sub-picture. ■ Sound Select (Main / Sub): You can choose the desired sound (Main / Sub) in PIP mode. ¦ DivX® Video On Demand Shows the registration code authorized for the TV. If you connect to the DivX web site and register, you can download the VOD registration file. If you play the VOD registration using Media contents, the registration is completed. ✎For more information on DivX® VOD, visit “http://vod.divx. com”.English 30 Basic Features Support Menu MENUm→ Support → ENTERE Self Diagnosis ✎Self Diagnosis might take few seconds, this is part of the normal operation of the LED display ■ Picture Test (Yes / No): Use to check for picture problems. Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes. There may be a problem with the LED display. Contact Samsung’s Call Centre for assistance. No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual. ■ Sound Test (Yes / No): Use the built-in melody sound to check for sound problems. Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes. There may be a problem with the LED display. Contact Samsung’s Call Centre for assistance. No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual. ■ Signal Information: (digital channels only) An HD channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength. ■ Reset: Restores all settings to factory defaults except network settings. Software Upgrade Software Upgrade can be performed via a broadcasting signal or downloading the latest firmware from “www.samsung.com,” to a USB memory device. Current Version the software already installed in the LED display. ✎Software is represented as “Year/Month/Day_Version”. Software Upgrade By USB By Channel Alternative Software Standby Mode Upgrade 2 hours later Installing the Latest Version ■ By USB: Insert a USB drive containing the firmware upgrade file, downloaded from “www.samsung.com,” into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can easily reset them after the upgrade. ■ By Channel: Upgrade the software using the broadcasting signal. ✎ If the function is selected during the software transmission period, software will be automatically searched and downloaded. ✎ The time required to download the software is determined by the signal status. ■ Alternative Software: Replace the current software with the alternative. ■ Standby Mode Upgrade (Off / 1 hour later / 2 hours later / 00:00 / 02:00 / 12:00 / 14:00): A manual upgrade will be automatically performed at selected time. Since the power of the unit is turned on internally, the screen may be turned on slightly for the LED product. This phenomenon may continue for more than 1 hour until the software upgrade is complete. Contact Samsung View this information when your LED display does not work properly or when you want to upgrade the software. You can find information regarding our call centres, and how to download products and software. Contents Home You can enjoy useful and various contents. TV Side USB DriveEnglish 31 Advanced Features Enjoy videos, photos, music files saved on a USB Mass Storage Class (MSC) device. 1. Press the CONTENT button. 2. Press the l / r button to select desired menu (Media Play), then press the ENTERE button. CONTENT → Media Play → ENTERE Using the Media Play ¦ Connecting a USB Device 1. Turn on your TV. 2. Connect a USB device containing photo and music files to the USB jack on the side of the TV. 3. When USB is connected to the TV, popup window appears. Then you can select Device connected. ✎It might not work properly with unlicenced multimedia files. ✎Need-to-Know List before using Media Play. x MTP (Media Transfer Protocol) is not supported. x The file system supports FAT16, FAT32 and NTFS. x Certain types of USB Digital camera and audio devices may not be compatible with this TV. x Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported). Devices should be connected directly to the TV’s USB port. x USB (HDD) is not supported. x Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. x Do not disconnect the USB device while it is loading. x The higher the resolution of the image, the longer it takes to display on the screen. x The maximum supported JPEG resolution is 15360 x 8640 pixels. x For unsupported or corrupted files, the “Not Supported File Format” message is displayed. x MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a technology that supports the creation, distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements. x If more than 2 PTP devices are connected, you can only use one at a time. x If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high power (more than 500mA or 5V) may not be supported. x If an over-power warning message is displayed while you are connecting or using a USB device, the device may not be recognized or may malfunction. Media Play / Videos / 3.23GB Free / 3.55GB Cruzer Blade Videos Photos Music R Return • The displayed image may differ depending on the model. TV Side USB DriveEnglish 32 Advanced Features x If the TV has been no input during time set in Auto Protection Time, the Screensaver will run. x The power-saving mode of some external hard disk drives may be released automatically when connected to the TV. x If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read. x If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is not played, connect the USB device to the PC, format the device and check the connection. x Media Play only supports sequential jpeg format. ¦ Screen Display Move to the desired file using the u / d / l / r buttons and then press the ENTERE button. The file is played. Media Play screen may differ depending on the way to enter the screen. Contents mode: You can select the desired Content Category. Information: Displays the selected content category (Music, for example), device (USB drive,for example), folder/file name and page. Displays the selected file information. Upper Folder Video_02 1.Jan.2012 Video_02.AVI 1.Jan.2012 17.6MB Video_03 1.Jan.2012 Video_04 1.Jan.2012 Video_05 1.Jan.2012 Video_06 1.Jan.2012 Video_07 1.Jan.2012 Video_08 1.Jan.2012 Video_01 1.Jan.2012 Media Play / Videos / Cruzer.../Video_02.AVI 2 / 8 �µ Page Move E Play T Tools R Return Operation Buttons • �Turn to the previous page. Only available in Music. • µTurn to the next page. Only available in Music. • E Play: Play the media file. • T Tools: Displays the option menu. • R Return: Move to the previous step. • The displayed image may differ depending on the model.English 33 Advanced Features Videos Playing Video 1. Press the l / r / u / d button to select the desired video in the file list. 2. Press the ENTERE button or ∂ (Play) button. x The selected file name is displayed on the top with its playing time. x If video time information is unknown, play time and progress bar are not displayed. x During video playback, you can search using l and r button. x You can use π (REW) and µ (FF) buttons during playback. ✎ In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself. • The displayed image may differ depending on the model. Supported Subtitle Formats – External Name Extension MPEG-4 Timed text .ttxt SAMI .smi SubRip .srt SubViewer .sub Micro DVD .sub or .txt SubStation Alpha .ssa Advanced SubStation Alpha .ass Powerdivx .psb – Internal Name Container Xsub AVI SubStation Alpha MKV Advanced SubStation Alpha MKV SubRip MKV MPEG-4 Timed text MP4English 34 Advanced Features Supported Video Formats File Extension Container Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Comments Audio Codec *.avi *.mkv *.asf *.wmv *.mp4 *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.m2ts *.mts *.divx AVI MKV ASF MP4 3GP VRO VOB PS TS DivX 3.11 / 4.x / 5.1 / 6.0 1920 x 1080 30 20 [40] GMC Not Support AC3 LPCM ADMPCM(IMA, MS) AAC HE-AAC WMA DD+ MPEG(MP3) DTS Core Vorbis MPEG4 SP / ASP H.264 BP / MP / HP Not Include FMO / ASO / RS Support BP / MP / HP Level 4.1 H.263 Profile3, restricted up to SD resolution Motion JPEG 640 x 480 10 Window Media Video v9 1920 x 1080 20 [40] VC1 SP / MP / A P L3 Support, L4 Not Support Simple Profile Medium Level Main Profile High Level Advanced Profile Level 3 WMV9 support MPEG2 Hight Profile High Level MPEG1 MPEG-1 except D-pictureEnglish 35 Advanced Features Other Restrictions ✎NOTE x If there are problems with the contents of a codec, the codec will not be supported. x If the information for a Container is incorrect and the file is in error, the Container will not be able to play correctly. x Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/ sec listed in the table above. x If the Index Table is in error, the Seek (Jump) function is not supported. x You may experience file stuttering while playing a video through a network connection. Name Format x Supports up to H.264, Level 4.1 x H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported. x MPEG4 SP, ASP: – Below 1280 x 720: 60 frame max – Above 1280 x 720: 30 frame max x GMC 2 over is not supported. x Supports up to WMA 7, 8, 9, STD x WMA 9 PRO does not support 2 channel excess multi channel or lossless audio. x WMA sampling rate 22050Hz mono is not supported. Photos Viewing a Photo (or Slide Show) 1. Press the u / d / l / r button to select the desired photo in the file list. 2. Press the ENTERE button. – When a selected photo is displayed, press the ENTERE button to start the slide show. – During the slide show, all files in the file list will be displayed in order. ✎Music files can be automatically played during the Slide Show if the Background Music is set to On. ✎The Background Music cannot be changed until the BGM has finished loading. • The displayed image may differ depending on the model. 0801181247070.JPG 1.Jan.2012 663.0KB 1920 x 1080 �µPage Move E Play T Tools R Return Media Play / Photos / Cruzer... / Photos / 0801181... .JPG 7 / 1000 Upper Folder Supported Picture Formats File Extension Format Resolution *.jpg JPEG 15360 x 8640 *.bmp BMP 1920 x 1080 *.mpo MPO 15360 x 8640English 36 Advanced Features Music Playing Music 1. Press the u / d button to select the desired Music in the file list. 2. Press the ENTERE button. ✎Only displays the files with the file extension in following supported music formats list. Other file extensions are not displayed, even if they are saved on the same USB device. ✎If the sound is abnormal when playing MP3 files, adjust the Equaliser in the Sound menu. (An over-modulated MP3 file may cause a sound problem.) • The displayed image may differ depending on the model. Media Play / Music / Cruzer... / Music / Music_01.mp3 Music_01 Singer 1 Music_02 Singer 2 Music_01 Singer 1 2003 Fallen Other 2:36 / 5:00 Music_03 Singer 3 Music_04 Singer 4 Music_05 Singer 5 Music_06 Singer 6 Music_07 Singer 7 Music_08 Singer 8 Music_09 Singer 9 Upper Folder b{ Page Move EPlay T Tools R Return Playing selected music 1. Press the TOOLST button and select Play Selection. 2. Select the desired music. ✎ The c mark appears to the left of the selected files. 3. Press the TOOLST button and select Play Selection. ✎ You can select or deselect all music pressing the Select All / Deselect All. Supported Music Formats File Extension Type Codec *.mp3 MPEG MPEG1 Audio Layer 3 *.m4a *.mpa *.aac *.3ga MPEG4 AAC *.flac FLAC FLAC *.ogg OGG Vorbis *.wma WMA WMAEnglish 37 Advanced Features ¦ Media Play - Additional Functions Videos/Photos/Music Play Option menu Press the TOOLST button and you can make the following operations. Category Operations Videos Photos Music Shuffle Mode You can play the music randomly. > Repeat Mode You can play media files repeatedly. > > Picture Mode You can adjust the picture setting. > > Sound Mode You can adjust the sound setting. > > > Start Slide Show / STOP Slide Show You can start or pause a Slide Show. > Slide Show Speed You can select the slide show speed during the slide show. > Background Music You can on/off background music when watching a Slide Show. > Background Music Setting You can select background music when watching a Slide Show. > Zoom You can zoom into images in full screen mode. > Rotate You can rotate images in full screen mode. > Information You can see detailed information about the played file. > > > Play Selection You can play the items what you selected. > > > Title Search You can move directly to another Title. > Time Search You can search the movie using l and r buttons at intervals of 1 minute. > Picture Size You can adjust the picture size to your preference. > Subtitle You can set the subtitle On / Off. > Subtitle Settings Play a video file with captions displayed. This option is available only when the caption file name matches the video file name. > Audio language View a video in a supported language of your choice. The option is available only when a stream-type file that supports multiple audio formats is played. >English 38 Other Information Analogue Channel Teletext Feature The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed. ✎You can change Teletext pages by pressing the numeric buttons on the remote control. 1 / (Teletext on/mix/off): Activates the Teletext mode for the current channel. Press the button twice to overlap the Teletext mode with the current broadcasting screen. Press it one more time to exit teletext. 2 8 (store): Stores the Teletext pages. 3 6 (index): Displays the index (contents) page at any time while you are viewing Teletext. 4 4 (size): Displays the teletext on the upper half of the screen in double-size. To move the text to the lower half of the screen, press it again. For normal display, press it once again. 5 9 (hold): Holds the display at the current page, in the case that there are several secondary pages that follow automaticially. To undo, press it again. 6 Colour buttons (red, green, yellow, blue): If the FASTEXT system is used by the broadcasting company, the different topics on a Teletext page are colour-coded and can be selected by pressing the coloured buttons. Press the colour corresponding to the topic of your choice. A new colour-coded page is displayed. Items can be selected in the same way. To display the previous or next page, press the corresponding coloured button. 7 0 (mode): Selects the Teletext mode (LIST/ FLOF). If pressed during LIST mode, switches the mode to List save mode. In List save mode, you can save a Teletext page into a list using the 8(store) button. 8 1 (sub-page): Displays the available sub-page. 9 2 (page up): Displays the next Teletext page. 0 3 (page down): Displays the previous Teletext page. ! 5 (reveal): Displays the hidden text (answers to quiz games, for example). To display the normal screen, press it again. @ 7 (cancel): Shrinks the Teletext display to overlap with the current broadcast. Typical Teletext page Part Contents A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text. F Status information. FASTEXT information. 7 8 9 0 ! @ 3 1 4 5 6 2English 39 Other Information Attaching a Wall Mount/Desktop Stand Preparing before installing Wall-Mount/Desktop Stand 1. Turn the product off and unplug the power cord from the wall outlet. 2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product face down. 3. Hold the main body of the product with your hand. Pull the stand in the direction of the arrow as shown in the figure to separate it. Attaching a Wall Mount/Desktop Stand 1 A 2 3 4 A B Wall mount kit/desktop stand (not supplied) A Wall/Desktop Stand Mount B [ Caution Important For the installation of Wall-mount, please don’t use screws longer than 14mm(L14) of longitude. 4. Align wall mount/desktop stand to the Monitor/LED display and firmly fix the wall mount/desktop stand by fastening the screw. 5. Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand, wall mount stand or another stand) and firmly fix the stand by fastening the screw.English 40 Other Information ✎NOTE x If you use screws that are longer than the standard specifications, the inside of the product may be damaged. x For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ depending on the corresponding specifications. x Avoid using screws that are incompatible with the standard VESA specifications and avoid assembling them using excessive force. This may result in damage to the product or injury due to the product falling. Samsung shall not be held liable for any damage or injury. x Samsung shall not be held liable for any damage to the product or injury caused by using a wall mount/desktop stand that is not compatible with the specifications or due to an installation not performed by an authorized installation engineer. x When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm (3.93 inches) of space from the wall. x Use the wall mount according to the international specifications. Anti-theft Kensington Lock The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use. ✎Please find a “K” icon on the rear of the LED display. A kensington slot is beside the “K” icon. To lock the product, follow these steps: 1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair. 2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable. 3. Insert the locking device into the Kensington slot on the product (1). 4. Lock the lock. 1 ✎These are general instructions. For exact instructions, see the User manual supplied with the locking device. ✎The locking device has to be purchased separately. ✎The location of the Kensington slot may be different depending on the LED display model.English 41 Other Information Troubleshooting If you have any questions about the LED display, first refer to this list. If none of these troubleshooting tips apply, please visit “www. samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual. Issues Solutions and Explanations Picture Quality First of all, please perform the Picture Test and confirm that your LED display is properly displaying test image. (go to MENU - Support - Self Diagnosis - Picture Test) If the test image is properly displayed, the poor picture may caused by the source or signal. The LED display image does not look as good as it did in the store. • If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI to deliver HD (high definition) picture quality. • Cable/Satellite subscribers: Try HD stations from the channel line up. • Antenna connection: Try HD stations after performing Auto tuning. ✎ Many HD channels are up scaled from SD(Standard Definition) contents. • Adjust the Cable/Set top box video output resolution to 1080i or 720p. • Make sure you are watching the LED display at the minimum recommended distance based on the size and definition of the signal. The picture is distorted: macroblock error, small block, dots, pixelization • Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies. • Low signal level or bad quality can cause picture distortion. This is not a LED display issue. • Mobile phones used close to the LED display (cca up to 1m) may cause noise in picture on analogue and digital LED display. There is poor colour or brightness. • Adjust the Picture options in the LED display menu. (go to Picture Mode / Colour / Brightness / Sharpness) • Adjust Energy Saving option in the LED display menu. (go to MENU - System - Eco Solution - Energy Saving) • Try resetting the picture to view the default picture settings. (go to MENU - Picture - Reset Picture) There is a dotted line on the edge of the screen. • If the picture size is set to Screen Fit, change it to 16:9. • Change cable/satellite box resolution. When changing channels, the picture freezes or is distorted or delayed. • If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the cable box reboots. It may take up to 20 minutes. • Set the output resolution of the cable box to 1080i or 720p. Sound Quality First of all, please perform the Sound Test to confirm that your LED display audio is properly operating. (go to MENU - Support - Self Diagnosis - Sound Test) If the audio is OK, the sound problem may caused by the source or signal. There is no sound or the sound is too low at maximum volume. • Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc) connected to your LED display. The picture is good but there is no sound. • If you are using a DVI to HDMI cable, LED display set does not support audio. • Reboot the connected device by reconnecting the device’s power cable. • If your LED display has a headphone jack, make sure there is nothing plugged into it. The speakers are making an inappropriate noise. • For antenna or cable connections, check the signal strength. Low signal level may cause sound distortion. No Picture, No Video The LED display will not turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the LED display. • Make sure the wall outlet is working. • Try pressing the POWER button on the LED display to make sure the problem is not the remote. If the LED display turns on, refer to “The remote control does not work” below. The LED display turns off automatically. • Ensure the Sleep Timer is set to Off in the Time menu. • If your PC is connected to the LED display, check your PC power settings. • Make sure the AC power cord is plugged in securely to the wall outlet and the LED display. • When watching LED display from an antenna or cable connection, the LED display will turn off after 10 ~ 15 minutes if there is no signal.English 42 Other Information Issues Solutions and Explanations There is no picture/video. • Check cable connections (remove and reconnect all cables connected to the LED display and external devices). • Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the LED display input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the LED display. • Make sure your connected devices are powered on. • Be sure to select the LED display correct source by pressing the SOURCE button on the LED display remote. • Reboot the connected device by reconnecting the device’s power cable. RF(Cable/Antenna) Connection The LED display is not receiving all channels. • Make sure the Antenna cable is connected securely. • Please try Setup (Initial setup) to add available channels to the channel list. Go to MENU - System - Setup (Initial setup) and wait for all available channels to be stored. • Verify the Antenna is positioned correctly. The picture is distorted: macro block error small block, dots, pixelization. • Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action movies. • A low signal can cause picture distortion. This is not a LED display issue. Others The picture will not display in full screen. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents. • Black bars on the top and bottom will appear during movies that have aspect ratios different from your LED display. • Adjust the picture size options on your external device or LED display to full screen. The remote control does not work. • Replace the remote control batteries with the poles (+/–) in the right direction. • Clean the sensor’s transmission window on the remote. • Try pointing the remote directly at the LED display from 5~6 feet away. The cable/set top box remote control doesn’t turn the LED display on or off, or adjust the volume. • Programme the Cable/Set top box remote control to operate the LED display. Refer to the Cable/Set user manual for the SAMSUNG LED display code. A “Mode Not Supported” message appears. • Check the supported resolution of the LED display, and adjust the external device’s output resolution accordingly. There is a plastic smell from the LED display. • This smell is normal and will dissipate over time. The LED display Signal Information is unavailable in the Self Diagnosis Test menu. • This function is only available with digital channels from an Antenna / RF / Coax connection. LED display is tilted to the right or left side. • Remove the stand base from the LED display and reassemble it. There are difficulties assembling the stand base. • Make sure the LED display is placed on a flat surface. If you can not remove the screws from the LED display, please use a magnetized screw driver. The Channel menu is grey out (unavailable). • The Channel menu is only available when the LED display source is selected. Your settings are lost after 30 minutes or every time the LED display is turned off. • If the LED display is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change the settings from Store Demo mode to Home Use mode in the Setup (Initial setup) procedure. Press the SOURCE button to select TV mode, and go to MENU → System → Setup (Initial setup) → ENTERE. You have intermittent loss of audio or video. • Check the cable connections and reconnect them. • Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the LED display to the wall, we recommend using cables with 90 degree connectors. You see small particles when you look closely at the edge of the frame of the LED display. • This is part of the product’s design and is not a defect.English 43 Other Information Issues Solutions and Explanations The PIP menu is not available. • PIP functionality is only available when you are using a HDMI source. You turned the LED display off 45 minutes ago, and it turned on again. • It is normal. The LED display operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst your watching LED display. The message “Scramble signal” or “Weak Signal/No Signal” appears. • If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot. • If there is still a problem, pull the CAM CARD out of the LED display and insert it into the slot again. There are recurrent picture/sound issues. • Check and change the signal/source. A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture. • To prevent this, use felt pads on any surface of the LED display that comes in direct contact with furniture. ✎This panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. ¦ Storage and Maintenance ✎If you attched some stickers on the LED display screen, it remains some debris after removing the sticker. Please clean it to watch LED display. ✎The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using the cloth provided or a soft cloth to prevent scratches. Do not spray water or a cleaning agent directly onto the product. Any liquid that goes into the product may cause a failure, fire, or electric shock. Clean the product with a soft cloth dapped in a small amount of water. [CAUTION If the height of " A" on one side is different from the other side, adjust the heights.English 44 Other Information ¦ Licence TheaterSound HD, SRS and the symbol are trademarks of SRS Labs, Inc. TheaterSound HD technology is incorporated under licence from SRS Labs, Inc. Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. 2.0 Channel Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. (Only available in TB300 series) Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product Includes software. © DTS, Inc. All Rights Reserved. (Only available in TB350 series) Open source licence notice In the case of using open source software, Open Source licence are available on the product menu. Open Source Licence Notice is written only English. ¦ WEEE Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.English 45 Other Information Specifications Environmental considerations Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C) Humidity : 10 % ~ 80 %, non-condensing Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C) Humidity : 5 % ~ 95 %, non-condensing Tilt -1°(±2°) ~ 20°(±2°) LED display System Analogue: B/G, D/K, L, I (Depending on your country selection) Digital: DVB-T/DVB-C Colour/Video System Analogue: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60 Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0 Sound System BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC HDMI IN Video: 1080 24p, 1080p, 1080i, 720p, 576p, 480p Audio: 2Ch Linear PCM 32/44.1/48kHz, 16/20/24bits. Model Name T19B300 T22B300 T24B300 T27B300 Screen Size (Diagonal) 18.5 inches (47 cm) 21.5 inches (55 cm) 23.6 inches (60 cm) 27 inches (69 cm) Display Resolution 1366 x 768 @ 60Hz 1920 x 1080 @ 60Hz Sound (Output) 5W × 2 Dimensions (WxDxH) (Without Stand) 444.7 x 48.5 x 278.2 mm (17.5 x 1.9 x 11.0 inches) 509.7 x 47 x 318.2 mm (20.1 x 1.9 x 12.5 inches) 569.2 x 49 x 349.4 mm (22.4 x 1.9 x 13.8 inches) 643.3 x 49 x 397.9 mm (25.3 x 1.9 x 15.7 inches) (With Stand) 444.7 x 187 x 356.4 mm (17.5 x 7.4 x 14.0 inches) 509.7 x 195 x 396.6 mm (20.1 x 7.7 x 15.6 inches) 569.2 x 195 x 428 mm (22.4 x 7.7 x 16.9 inches) 643.3 x 252 x 476.5 mm (25.3 x 9.9 x 18.8 inches) Weight (Without Stand) 2.95 kg (6.5 Ibs) 3.7 kg (8.2 Ibs) 4.25 kg (9.4 Ibs) 5.1 kg (11.2 Ibs) (With Stand) 3.2 kg (7.1 Ibs) 3.95 kg (8.7 Ibs) 4.5 kg (9.9 Ibs) 5.6 kg (12.3 Ibs) Model Name T22B350 T23B350 T24B350 Screen Size (Diagonal) 21.5 inches (55 cm) 23 inches (58 cm) 24 inches (61 cm) Display Resolution 1920 x 1080 @ 60Hz Sound (Output) 5W × 2 Dimensions (WxDxH) (Without Stand) 509.7 x 47 x 318.2 mm (20.1 x 1.9 x 12.5 inches) 547.5 x 49 x 337.9 mm (21.6 x 1.9 x 13.3 inches) 569.2 x 49 x 349.4 mm (22.4 x 1.9 x 13.8 inches) (With Stand) 509.7 x 195 x 396.6 mm (20.1 x 7.7 x 15.6 inches) 547.5 x 195 x 416.1 mm (21.6 x 7.7 x 16.4 inches) 569.2 x 195 x 428 mm (22.4 x 7.7 x 16.9 inches) Weight (Without Stand) 3.7 kg (8.2 Ibs) 3.25 kg (7.2 Ibs) 4.15 kg (9.1 Ibs) (With Stand) 3.95 kg (8.7 Ibs) 3.5 kg (7.7 Ibs) 4.45 kg (9.8 Ibs) ✎NOTE x Design and specifications are subject to change without prior notice. x For information about power supply, and more about power consumption, refer to the label attached to the product. x Some models may not be available for purchase depending on the region. x If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected. x DPM(Display Power Management) Function does not work if you used in conjunction with the HDMI IN (DVI) port of this product.País del Centro de atención al cliente Sitio web EUROPE ALBANIA 42 27 5755 http://www.samsung.com AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) http://www.samsung.com BELGIUM 02-201-24-18 http://www.samsung.com/be (Dutch) http://www.samsung.com/be_fr (French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 http://www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com Samsung Electronics Czech and Slovak, s.r.o.,Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8 DENMARK 70 70 19 70 http://www.samsung.com FINLAND 030 - 6227 515 http://www.samsung.com FRANCE 01 48 63 00 00 http://www.samsung.com GERMANY 01805 - SAMSUNG (726-7864, € 0,14/Min) http://www.samsung.com CYPRUS From landline : 8009 4000 http://www.samsung.com GREECE From landline : 80111-SAMSUNG (7267864) From landline & mobile : (+30)210 6897691 http://www.samsung.com HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.com ITALIA 800-SAMSUNG (726-7864) http://www.samsung.com KOSOVO +381 0113216899 http://www.samsung.com LUXEMBURG 261 03 710 http://www.samsung.com MACEDONIA 023 207 777 http://www.samsung.com MONTENEGRO 020 405 888 http://www.samsung.com NETHERLANDS 0900-SAMSUNG (0900-7267864) ( € 0,10/Min) http://www.samsung.com NORWAY 815-56 480 http://www.samsung.com POLAND 0 801-1SAMSUNG (172-678) +48 22 607-93-33 http://www.samsung.com PORTUGAL 80820-SAMSUNG (808207267) http://www.samsung.com RUMANIA From landline : 08010-SAMSUNG (7267864) From landline & mobile : (+40)21 206 01 10 http://www.samsung.com SERBIA 0700 SAMSUNG (0700 726 7864) http://www.samsung.com SLOVAKIA 0800 - SAMSUNG (0800-726 786) www.samsung.com/sk SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) http://www.samsung.com/ch http://www.samsung.com/ch_fr (French) U.K 0330 SAMSUNG (7267864) http://www.samsung.com EIRE 0818 717100 http://www.samsung.com LITHUANIA 8-800-77777 http://www.samsung.com LATVIA 8000-7267 http://www.samsung.com ESTONIA 800-7267 http://www.samsung.com TURKEY 444 77 11 http://www.samsung.com CIS RUSSIA 8-800-555-55-55 http://www.samsung.com GEORGIA 8-800-555-555 http://www.samsung.com ARMENIA 0-800-05-555 http://www.samsung.com AZERBAIJAN 088-55-55-555 http://www.samsung.com KAZAKHSTAN 8-10-800-500-55-500(GSM: 7799) http://www.samsung.com UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.com KYRGYZSTAN 00-800-500-55-500 http://www.samsung.com TADJIKISTAN 8-10-800-500-55-500 http://www.samsung.com Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.© 2012 Samsung Electronics Co., Ltd. All rights reserved. BN46-00196T-02 País del Centro de atención al cliente Sitio web MONGOLIA http://www.samsung.com UKRAINE 0-800-502-000 http://www.samsung.com/ua http://www.samsung.com/ua_ru BELARUS 810-800-500-55-500 http://www.samsung.com MOLDOVA 00-800-500-55-500 http://www.samsung.com ASIA PACIFIC AUSTRALIA 1300 362 603 http://www.samsung.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com CHINA 400-810-5858 http://www.samsung.com HONG KONG (852) 3698 - 4698 http://www.samsung.com/hk http://www.samsung.com/hk_en/ INDIA 1800 1100 11 3030 8282 1800 3000 8282 1800 266 8282 http://www.samsung.com INDONESIA 0800-112-8888 021-5699-7777 http://www.samsung.com JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com PHILIPPINES 1-800-10-SAMSUNG (726-7864) for PLDT 1-800-3-SAMSUNG(726-7864) for Digitel 1-800-8-SAMSUNG(726-7864) for Globe02-5805777 http://www.samsung.com SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com THAILAND 1800-29-3232 02-689-3232 http://www.samsung.com TAIWAN 0800-329-999 0266-026-066 http://www.samsung.com VIETNAM 1 800 588 889 http://www.samsung.com MIDDLE EAST IRAN 021-8255 http://www.samsung.com OMAN 800-SAMSUNG(726-7864) http://www.samsung.com KUWAIT 183-2255 http://www.samsung.com BAHRAIN 8000-4726 http://www.samsung.com EGYPT 08000-726786 http://www.samsung.com JORDAN 800-22273 http://www.samsung.com MOROCCO 080 100 2255 http://www.samsung.com SAUDI ARABIA 9200-21230 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com AFRICA CAMEROON 7095- 0077 http://www.samsung.com COTE D’ IVOIRE 8000 0077 http://www.samsung.com GHANA 0800-10077 http://www.samsung.com 0302-200077 KENYA 0800 724 000 http://www.samsung.com NIGERIA 0800-726-7864 http://www.samsung.com SENEGAL 800-00-0077 http://www.samsung.com SOUTH AFRICA 0860-SAMSUNG(726-7864) http://www.samsung.com TANZANIA 0685 88 99 00 http://www.samsung.com UGANDA 0800 300 300 http://www.samsung.com Монитор LED TV (MFM TV) руководство пользователя Благодарим вас за приобретение этого изделия Samsung. Чтобы получить сервисное обслуживание в полном объеме, зарегистрируйте ваше изделие по адресу TB300 TB350Русский 2 Иллюстрации в данном руководстве приведены только для справки и могут отличаться от фактического внешнего вида изделия. Внешний вид и характеристики изделия могут изменяться без уведомления. Просмотр цифрового телевидения 1. Относящиеся к цифровому телевидению (DVB) функции доступны только в тех странах или регионах, в которых осуществляется вещание цифрового телевизионного сигнала DVB-T (MPEG2 и MPEG4 AVC) или в которых есть кабельное телевидение, совместимое со стандартом DVB-C (MPEG2 и MPEG4 AAC). По вопросам возможности приема сигнала DVB-T или DVB-C обращайтесь к местному дилеру. 2. DVB-T — это стандарт эфирного цифрового телевизионного вещания европейского консорциума DVB, а DVB-C — это стандарт кабельного цифрового телевизионного вещания. 3. Этот LED-дисплей соответствует новейшим стандартам DVB-T и DVB-C (по состоянию на август 2008 года), однако совместимость с будущими стандартами эфирного (DVB-T) и кабельного (DVB-C) цифрового вещания не гарантируется. 4. В некоторых странах или регионах провайдеры кабельного телевидения могут взимать дополнительную плату за такие услуги, и от вас может потребоваться согласие с условиями предоставления их услуг. 5. Некоторые функции цифрового телевидения могут быть недоступны в некоторых странах и регионах, а реализация стандарта DVB-C может оказаться не полностью совместимой с некоторыми провайдерами кабельного телевидения. 6. Для получения дополнительной информации обратитесь в местный сервисный центр Samsung. ✎ На качество приема могут оказывать влияние различия в методах трансляции, используемых в разных странах. Проверьте работу LED-дисплея у местного авторизованного дилера SAMSUNG или обратитесь в центр поддержки Samsung, чтобы узнать, можно ли улучшить качество приема, изменяя настройки телевизора. Просмотр неподвижных изображений — предупреждение Избегайте продолжительного отображения на дисплее неподвижных изображений (например, картинок в формате jpeg) или неподвижных элементов (например, логотипа телевизионной программы, изображения в панорамном формате или формате 4:3, строки новостей или котировок внизу экрана и т. д.). Постоянное отображение неподвижных изображений может вызвать появление ореола и повлиять на качество изображения. Чтобы снизить риск появления этого эффекта, выполняйте следующие рекомендации: • Не смотрите один и тот же канал в течение длительного времени. • Всегда старайтесь вывести изображение во весь экран, используйте меню формата изображения для выбора формата, который подходит лучше всего. • Снизьте яркость и контрастность до минимальных значений, необходимых для обеспечения требуемого качества изображения. Слишком большие значения могут ускорить процесс выгорания. • Часто используйте все функции LED-дисплея, предназначенные для предотвращения образования остаточного изображения и выгорания. Подробную информацию см. в соответствующем разделе руководства пользователя. Место установки Между изделием и другими объектами (например, стенами) должно быть достаточное свободное пространство, чтобы обеспечить необходимую вентиляцию. Несоблюдение этого требования может стать причиной возгорания или повреждения изделия из-за повышения внутренней температуры изделия. ✎ Фактический внешний вид LED-дисплея может отличаться от изображений в данном руководстве в зависимости от модели. ✎ Будьте осторожны, касаясь LED-дисплея. Некоторые детали могут быть достаточно горячими. Установка на подставке. Настенная установка. 10 см 10 см 10 см 10 см 10 см 10 см 10 см • Плата за обслуживание может взиматься в следующих случаях: – (a) Специалист прибыл по вашему запросу, но не была обнаружена неисправность изделия (например, вы не прочитали это руководство пользователя). – (b) Вы доставили изделие в сервисный центр, но не была обнаружена неисправность изделия (например, вы не прочитали это руководство пользователя). • Размер платы за обслуживание будет сообщен заранее перед выполнением любых работ или выездом специалиста на дом.3 РУССКИЙ Русский Проверьте символ! Эту функцию можно вызвать, нажав кнопку t TOOLST на пульте ДУ. Примечание. Указывает на дополнительную информацию. Содержание Приступая к работе 4 4 Меры предосторожности 11 Принадлежности 12 Панель управления — внешний вид 13 Пульт дистанционного управления — внешний вид Подключение 14 14 Подключение антенны 14 Настройка (первоначальная настройка) 15 Подключение к аудиовидеоустройству 16 Подключение к разъему «Общий интерфейс» 17 Подключение к аудиоустройству и ПК 19 Выбор источника сигнала Основные функции 19 19 Навигация в меню 20 Использование кнопки INFO (телегид текущих и следующих программ) 20 Использование меню «Канал» 22 Меню «Канал» 23 Меню «Изображение» 25 Меню «Звук» 27 Меню «Система» 30 Меню «Поддержка» Дополнительные функции 31 31 Использование функции Media Play Другая информация 38 38 Функция «Телетекст» для аналоговых каналов 39 Крепление кронштейна для настенного монтажа/настольной подставки 40 Замок «кенсингтон» для защиты от кражи 41 Устранение неполадок 45 Технические характеристики4 Приступая к работе Русский Меры предосторожности Символы, используемые для обозначения мер предосторожности ПРеДУПРежДеНИе Несоблюдение мер предосторожности, отмеченных этим символом, может привести к серьезным травмам или даже к смертельному исходу. ОСТОРОжНО Несоблюдение мер предосторожности, отмеченных этим символом, может стать причиной травм или материального ущерба. Не делать. Следует соблюдать. ОСТОРОЖНО ОПАСНОСТЬ ПОРАЖЕНИЯ ЭЛЕКТРИЧЕСКИМ ТОКОМ, НЕ ОТКРЫВАТЬ ОСТОРОжНО: ЧТОБЫ СНИЗИТЬ РИСК ПОРАжеНИЯ ЭЛеКТРИЧеСКИМ ТОКОМ, Не СНИМАЙТе КРЫШКУ (ИЛИ ЗАДНЮЮ СТеНКУ). ВНУТРИ НеТ УЗЛОВ, ПОДЛежАЩИХ ОБСЛУжИВАНИЮ. ВСе РАБОТЫ ПО СеРВИСНОМУ ОБСЛУжИВАНИЮ ДОЛжНЫ ВЫПОЛНЯТЬСЯ КВАЛИФИЦИРОВАННЫМ ПеРСОНАЛОМ. Этот символ означает, что внутри имеются узлы, находящиеся под высоким напряжением. Любой контакт с внутренними узлами данного изделия опасен. Этот символ информирует о том, что к изделию приложено руководство, содержащее важную информацию об эксплуатации и обслуживании изделия. ¦ Относится к электропитанию ✎ Приведенные далее изображения служат только для справки и могут отличаться в зависимости от модели и страны. Предупреждение Не используйте поврежденные кабель или вилку питания или плохо прикрепленную розетку электросети. x Несоблюдение этого требования может стать причиной поражения электрическим током или возгорания. Не подключайте несколько электроприборов к одной настенной розетке. x Несоблюдение этого требования может стать причиной возгорания из-за перегрева настенной розетки. Не подключайте и не отключайте электропитание влажными руками. x Несоблюдение этого требования может стать причиной поражения электрическим током. ! Надежно вставляйте вилку питания в розетку. x Несоблюдение этого требования может стать причиной возгорания. ! Подключайте кабель питания к заземленной настенной розетке (только для оборудования с классом изоляции 1). x Несоблюдение этого требования может стать причиной поражения электрическим током или травм. Избегайте чрезмерного перегибания или скручивания кабеля питания и не кладите на кабель тяжелые предметы. x Несоблюдение этого требования может стать причиной поражения электрическим током из-за повреждения кабеля питания. Приступая к работе5 Приступая к работе Русский Размещайте кабель питания и изделие вдали от нагревателей. x Несоблюдение этого требования может стать причиной поражения электрическим током или возгорания. ! если контакты кабеля питания или сетевой розетки покрыты пылью, удалите ее, используя сухую ткань. x Несоблюдение этого требования может стать причиной возгорания. Осторожно Не отключайте кабель питания во время работы изделия. x Несоблюдение этого требования может стать причиной повреждения изделия из-за удара электрическим током. ! Используйте только кабель питания, поставляемый нашей компанией. Не используйте кабели питания от других электроприборов. x Несоблюдение этого требования может стать причиной поражения электрическим током или возгорания. ! При отключении кабеля питания от настенной розетки держите его за вилку, а не за кабель. x Несоблюдение этого требования может стать причиной поражения электрическим током или возгорания. ! Подключайте кабель питания к легкодоступной настенной розетке. x При возникновении проблем с изделием отключите кабель питания, чтобы полностью отключить электропитание. Нельзя полностью отключить электропитание, используя только кнопку питания изделия. ¦ Установка Предупреждение На ставьте на изделие горящие свечи или репелленты. x Несоблюдение этого требования может стать причиной возгорания. ! Для монтажа изделия на стене пригласите квалифицированного специалиста. x Несоблюдение этого требования может стать причиной травм. x Используйте указанное настенное крепление. Не устанавливайте изделие в местах с плохой вентиляцией, например на книжных полках или в шкафах. x Несоблюдение этого требования может стать причиной возгорания из-за внутреннего перегрева. ! Храните пластиковые пакеты, служившие для упаковки изделия, в недоступном для детей месте. x если ребенок наденет пластиковый пакет на голову, он может задохнуться. Не устанавливайте изделие в шатких или подверженных вибрации местах, например на неустойчивых или наклонных полках. x Падение изделия может стать причиной его повреждения или травм. x При использовании изделия в местах, подверженных сильной вибрации, возможны выход изделия из стоя или возгорание. ! Не устанавливайте изделие в запыленных местах, а также в тех местах, где в воздухе содержится влага (сауны), масляные пары, дым или вода (капли дождя). Не устанавливайте изделие в транспортных средствах. x Это может стать причиной поражения электрическим током или возгорания.6 Приступая к работе Русский Не устанавливайте изделие в местах, подверженных воздействию прямых солнечных лучей, и вблизи источников тепла, например каминов или обогревателей. x Это может сократить срок службы изделия и стать причиной возгорания. Устанавливайте изделие в месте, недоступном детям. x если ребенок опрокинет изделие, оно может упасть и стать причиной травм. x Так как передняя часть изделия тяжелее, устанавливайте его на плоскую устойчивую поверхность. ! Согните кабель внешней антенны вниз в месте его выхода из дома, чтобы дождевая вода не затекала по кабелю. x если дождевая вода попадет в изделие, возможно поражение электрическим током или возгорание. ! Устанавливайте антенну на значительном расстоянии от высоковольтных проводов. x если антенна коснется высоковольтных проводов или упадет на них, возможно поражение электрическим током или возгорание. Осторожно ! Не уроните изделие во время его переноски. x Это может стать причиной повреждения изделия или травм. Не кладите изделие на пол передней стороной вниз. x Это может повредить панель изделия. При установке изделия на кронштейне или на полке следите за тем, чтобы передняя сторона изделия не выступала вперед. x Несоблюдение этого требования может стать причиной падения изделия и его повреждения или травм. x Используйте шкаф или полку, размеры которых соответствуют размерам изделия. ! Бережно обращайтесь с изделием при его установке. x Несоблюдение этого требования может стать причиной повреждения изделия или травм. SAMSUNG ! При установке изделия в местах с сильно изменяющимися условиями окружающей среды возможны проблемы с работой изделия из- за этих условий. В таких случаях установка изделия возможна только после консультации со специалистом сервисной службы. x Места с содержанием в воздухе микроскопической пыли или химических веществ, с очень высокой или очень низкой температурой, с повышенной влажностью, вокзалы или аэропорты, в которых изделие эксплуатируется постоянно.7 Приступая к работе Русский ¦ Чистка Предупреждение ! Перед чисткой изделия отключите кабель питания. x Несоблюдение этого требования может стать причиной поражения электрическим током или возгорания. При чистке изделия не разбрызгивайте воду непосредственно на изделие. x Вода не должна попадать внутрь изделия. x Несоблюдение этого требования может стать причиной возгорания, поражения электрически током или повреждения изделия. Осторожно Не разбрызгивайте чистящее средство непосредственно на изделие. x Это может стать причиной обесцвечивания, растрескивания или отслоения внешних панелей изделия. ! При чистке изделия отключите кабель питания и почистите изделие прилагаемой чистящей салфеткой. x При чистке изделия не используйте химические вещества, например воск, бензин, спирт, растворители, репелленты, ароматизаторы, смазочные или моющие средства. Это может вызвать деформацию внешних панелей и смывание надписей. ! если не удается очистить изделие прилагаемой салфеткой, протрите изделие мягкой тканью, смоченной в специальном средстве для чистки мониторов. x если специального средства для чистки мониторов нет, перед чисткой изделия разведите чистящее средство в воде в соотношении 1:10. ! Так как поверхность изделия легко поцарапать, используйте прилагаемую чистящую салфетку. ¦ Использование Предупреждение В изделии имеются цепи, находящиеся под высоким напряжением, поэтому никогда не разбирайте, не ремонтируйте и не модифицируйте изделие самостоятельно. x Несоблюдение этого требования может стать причиной пожара или поражения электрическим током. x если необходимо отремонтировать изделие, обратитесь в сервисный центр. ! Чтобы переместить изделие, отключите питание и отсоедините кабель питания, антенный кабель и все другие проводные подключения. x Несоблюдение этого требования может стать причиной поражения электрическим током из-за повреждения кабеля питания.8 Приступая к работе Русский ! если изделие издает необычные звуки, чувствуется запах гари или из изделия идет дым, немедленно отключите вилку питания и обратитесь в сервисный центр. x Несоблюдение этого требования может стать причиной поражения электрическим током или возгорания. Не позволяйте детям виснуть на изделии или забираться не него. x При несоблюдении этого требования изделие может упасть, что может привести к травмам или летальному исходу. если вы уроните изделие или если будет поврежден его корпус, отключите питание и отсоедините кабель питания. Обратитесь в сервисный центр. x Несоблюдение этого требования может стать причиной пожара или поражения электрическим током. Не кладите на изделие игрушки или печенье. x если ребенок повиснет на изделии, чтобы достать такой предмет, то изделие может упасть и стать причиной травм или летального исхода. ! Во время грозы или молний отключайте кабель питания и ни в коем случае не касайтесь антенного кабеля, так как это опасно. x Несоблюдение этого требования может стать причиной поражения электрическим током или возгорания. ! Не роняйте на изделие посторонние предметы и берегите его от ударов. x Несоблюдение этого требования может стать причиной поражения электрическим током или возгорания. При перемещении изделия не тащите его за кабель питания или антенный кабель. x Несоблюдение этого требования может стать причиной поражения электрически током, возгорания или повреждения изделия из- за повреждения кабеля. ! GAS При утечке газа не касайтесь изделия или кабеля питания и немедленно провентилируйте помещение. x Искра может стать причиной взрыва или возгорания. x Во время грозы или молний не касайтесь кабеля питания или антенного кабеля. Не поднимайте и не перемещайте изделие, держа его только за кабель питания или сигнальный кабель. x Несоблюдение этого требования может стать причиной поражения электрически током, возгорания или повреждения изделия из- за повреждения кабеля. ! Не используйте рядом с изделием легковоспламеняющиеся спреи и не размещайте рядом с ним легковоспламеняющихся предметов. x Это может стать причиной взрыва или возгорания. Следите за тем, чтобы вентиляционные отверстия не были закрыты скатертями или занавесками. x Несоблюдение этого требования может стать причиной возгорания из-за внутреннего перегрева. 100 Не засовывайте в изделие (вентиляционные отверстия, порты и т. д.) металлические предметы, например столовые приборы, монеты или заколки для волос, или легковоспламеняющиеся предметы. x если в изделие попадет жидкость, выключите питание, отключите кабель питания и обратитесь в сервисную службу. x Несоблюдение этого требования может стать причиной повреждения изделия, поражения электрически током или возгорания.9 Приступая к работе Русский Не ставьте на изделие емкости с жидкостью, например вазы, цветочные горшки, напитки, косметику или лекарства, или металлические предметы. x если в изделие попадет жидкость, выключите питание, отключите кабель питания и обратитесь в сервисную службу. x Несоблюдение этого требования может стать причиной повреждения изделия, поражения электрически током или возгорания. Не нажимайте на изделие с чрезмерной силой. Возможно деформирование или повреждение изделия. Осторожно ! Отображение неподвижных изображений в течение длительного времени может стать причиной появления на экране постоянного изображения или пятен. x если изделие не используется в течение длительного времени, переключите его в режим энергосбережения или выберите заставку с движущимся изображением. -_- ! если изделие не используется в течение длительного времени, например когда вы уходите из дома, отключайте кабель питания от настенной розетки. x если это требование не соблюдается, то из-за накопления пыли и перегрева или короткого замыкания возможно возгорание или поражение электрическим током. ! Должным образом настройте разрешение и частоту обновления кадров в изделии. x При несоблюдении этой рекомендации возможно чрезмерное напряжение зрения. Не переворачивайте изделие и не перемещайте его, держа только за подставку. x Изделие может упасть, что может стать причиной его повреждения или травм. ! Постоянный просмотр изображения с близкого расстояния может привести к нарушениям зрения. Не используйте рядом с изделием увлажнители воздуха или кухонные плиты. x Несоблюдение этого требования может стать причиной поражения электрическим током или возгорания. ! При продолжительном просмотре экрана изделия важно периодически делать перерывы для отдыха глаз (5 минут каждый час). x Это снимает напряжение зрения. Панель изделия нагревается при продолжительном использовании, поэтому не касайтесь изделия.10 Приступая к работе Русский ! Храните мелкие аксессуары в недоступном для детей месте. ! Будьте осторожны при регулировке угла наклона изделия и высоты подставки. x если вы защемите руку или палец, возможны травмы. x если сильно наклонить изделие, оно может упасть и стать причиной травм. Не ставьте на изделие тяжелых предметов. x Несоблюдение этого требования может стать причиной повреждения изделия или травм. При использовании наушников или гарнитуры не выбирайте слишком большую громкость. x Слишком громкий звук может повредить слух. Следите за тем, чтобы дети не брали в рот батарейки, вынутые из пульта дистанционного управления. Храните батарейки в месте, недоступном для детей. x если дети положат батарейки в рот, немедленно обратитесь к врачу. ! При замене батареек соблюдайте полярность (+, -). x При несоблюдении этого требования возможно повреждение батареек или возгорание, травмы или повреждение из-за утечки электролита. Используйте только указанные стандартные батарейки. Не устанавливайте новые и использованные батарейки одновременно. x Это может стать причиной разрушения или протечки батарейки и привести к возгоранию, травмам или загрязнению (повреждению). ! Батарейки (и аккумуляторы) не должны утилизироваться с обычным мусором, их нужно возвращать для переработки. Покупатель ответственен за возврат использованных батареек или аккумуляторов для переработки. x Покупатель может вернуть использованные батарейки или аккумуляторы в ближайший общественный центр переработки или в магазин, продающий батарейки или аккумуляторы этого типа.11 Приступая к работе Русский Принадлежности ✎Убедитесь в том, что в комплект поставки LED-дисплея входят следующие принадлежности: если какой-либо предмет отсутствует, обратитесь к дилеру. ✎Цвет и форма принадлежностей могут различаться в зависимости от модели. ✎Не входящие в комплект поставки кабели можно приобрести отдельно. ✎Следите за тем, чтобы принадлежности не затерялись в упаковочном материале, когда вы открываете коробку. [ОСТОРОЖНО: ЗАЩИТНУЮ ПЛЕНКУ НУЖНО УДАЛЯТЬ ПОЛНОСТЬЮ x Руководство пользователя x Руководство по быстрой настройке x Пульт ДУ и батарейки (AAA x 2) x Чистящая салфетка x Гарантийный талон/Руководство по соблюдению мер предосторожности (недоступно в некоторых регионах) x Кабель питания y Кронштейн подставки y Основа подставки y Кабель D-Sub y Стереокабель Кабели подключения источников сигнала (продаются отдельно) y Кабель HDMI-DVI y Аудиокабель y Компонентный кабель y Оптический кабель y Кабель HDMI12 Приступая к работе Русский Панель управления — внешний вид ✎Цвет и форма изделия могут отличаться в зависимости от модели. SOURCE E Переключение всех доступных источников сигнала. В экранном меню эта кнопка выполняет те же функции, что и кнопка ENTERE пульта ДУ. MENU Вызов экранного меню и меню функций LED-дисплея. Y Регулировка громкости. В экранном меню кнопки Y выполняют те же функции, что и z кнопки l и r пульта ДУ. Смена каналов. В экранном меню кнопки z выполняют те же функции, что и кнопки u и d пульта ДУ. P (Питание) Включение и выключение LED-дисплея. Индикатор питания Мигает и гаснет, когда питание включено, горит в режиме готовности. Датчик пульта ДУ Направьте пульт ДУ на эту точку LED-дисплея. Режим готовности Не оставляйте LED-дисплей в режиме готовности на долгое время (например, если вы уезжаете в отпуск). В этом режиме по-прежнему потребляется небольшое количество электроэнергии, хотя индикатор кнопки питания не горит. Лучше отключить кабель питания. Панель управления13 Приступая к работе Русский Пульт дистанционного управления — внешний вид ✎Это специальный пульт дистанционного управления с точками Брайля на кнопках выбора каналов и цифровых кнопках для людей с ослабленным зрением. Установка батареек (размер батареек: AAA) Включение и выключение телевизора. Непосредственный выбор каналов. Режим телетекста: включен, двойной, смешанный и выключен. Отображение окна Дом. стр. содержим., в котором расположены разделы Список каналов, Телегид, Media Play, Диспетчер расписания и Источник. Быстрый выбор часто используемых функций. Отображение основного экранного меню. Возврат в предыдущее меню. PIP: Включение и выключение функции PIP (картинка в картинке). P.SIZE: Выбор настройки Размер картинки. AD/SUBT.: Включение или отключение звукового описания (функция доступна не во всех регионах). / Отображение цифровых субтитров. Перемещение курсора и выбор элемента меню. Подтверждение настройки. Используйте эти кнопки в соответствии с отображаемыми на экране указаниями. Регулировка громкости. Отображение списка доступных источников видеосигнала и выбор источника видеосигнала. Возврат к предыдущему каналу. Временное отключение звука. Отображение на экране списка каналов. Отображение электронного гида. Отображение информации на экране. Выход из меню. Используйте эти кнопки в режиме Media Play. Смена каналов.Подключение Подключение антенны При первоначальном включении LED-дисплея основные настройки выполняются автоматически. ✎Предварительная установка: подключение питания и антенны. ANT OUT Подключение электропитания Настройка (первоначальная настройка) Русский 14 При первом включении LED-дисплея отображается последовательность экранных запросов, помогающих выполнить основные настройки. Нажмите кнопку POWERP. Настройка возможна, только когда для параметра Источник выбрано значение ТВ. ✎Перед настройкой LED-дисплея убедитесь в том, что подключен антенный кабель. 1 Выбор языка меню Нажимайте кнопку u или d, чтобы выбрать язык меню. Когда язык будет 2 Домашний Демонстрация Выбор режима или выбран, два раза нажмите кнопку Нажимайте кнопку x Выберите режим u или Домашний d, затем нажмите кнопку . Режим ENTERE Демонстрация . ENTER предназначен для E. P использования в магазинах. x Переключение из режима Демонстрация в режим Домашний (стандартная настройка). Нажмите кнопку громкости LED-дисплея. Когда на экран будет выведен индикатор громкости, нажмите кнопку MENU и удерживайте ее нажатой в течении 5 секунд. x Режим Демонстрация предназначен только для использования в магазинах. При выборе этого режима некоторые функции недоступны. При использовании изделия дома выберите режим Домашний. 3 Выбор региона Нажмите кнопку ENTERE. Выберите соответствующий регион, нажимая кнопку u или d. Нажмите кнопку ENTERE, чтобы подтвердить выбор. 4 Автонастройка Нажимайте кнопку u или d, чтобы выбрать подходящую настройку, затем дважды нажмите кнопку ENTERE. Давайте найдём и сохраним каналы на Вашем телевизоре. Вы нуждаетесь в поиске каналов? x Да, я нуждаюсь. Все доступные каналы будут найдены и сохранены в Вашем телевизоре. (Автонастройка необходима) x Нет, я не нуждаюсь. Мой внешний приёмник обеспечивает приём всех доступных каналов , поэтому я не нуждаюсь в поиске каналов. ✎ Выбрав эту опцию, можно завершить настройку. x Антенна / Кабель. Выберите источник сигнала телевещания для запоминания каналов. Цифр. и аналог. / Цифр. / аналог.: Выберите источник каналов для запоминания. ✎ Дополнительные сведения см. на стр. 22. 5 Настройка Режим часов Выберите автоматическую или ручную настройку для параметра Режим часов. x Авто. Выберите часовой пояс, в котором вы находитесь (в зависимости от страны). x Ручной. Дату и время можно ввести вручную. ✎ При выборе на этапе 4 настройки «Нет, я не нуждаюсь. » время можно задать только вручную. 6 Завершена Нажмите кнопку ENTERE. Восстановление стандартной настройки... Выберите Система - Настройка (Первоначальная настройка). Введите PIN-код из 4 цифр. PIN-код по умолчанию — «0-0-0-0». Если вы хотите изменить PIN-код, используйте функцию Изменение PIN. Меню Настройка (MENU → Система) нужно вызвать еще раз дома, даже если вы делали это в магазине. ✎Если вы забудете PIN-код, в режиме ожидания нажмите кнопки пульта ДУ в указанной последовательности, чтобы восстановить стандартный PIN-код «0-0-0-0»: POWER (выключить) → MUTE → 8 → 2 → 4 → POWER (включить).Русский 15 Подключение Подключение к аудиовидеоустройству Использование кабеля HDMI или кабеля HDMI-DVI (до 1080p) Доступные устройства: DVD-плейер, Blu-ray плейер, приставка кабельного телевидения высокой четкости, приемник спутникового телевидения высокой четкости, видеомагнитофон ✎HDMI IN(DVI) / PC/DVI AUDIO IN x При подключении кабеля HDMI-DVI к порту HDMI IN(DVI) передача аудиосигнала не работает. x При подключении к LED-дисплею внешнего устройства, использующего старую версию HDMI, возможны искажения или отсутствие изображения. В этом случае запросите у изготовителя внешнего устройства информацию о версии HDMI. если она устаревшая, запросите обновление. x Приобретайте только сертифицированные кабели HDMI. Несоблюдение этого требования может привести к отсутствию изображения или ошибке подключения. x Рекомендуется использовать обычный высокоскоростной кабель HDMI или кабель с поддержкой локальной сети. Изделие не поддерживает подключение к локальной сети по кабелю HDMI. Использование кабеля Scart Доступные устройства: DVD-плеер, видеомагнитофон ✎В режиме Внешний выход цифрового ТВ поддерживает только видео стандартной четкости в формате MPEG и аудио. DVI OUT HDMI OUT AUDIO OUT W R DVD / Blu-ray-плеер DVD / Blu-ray-плеер EXT (RGB) EXT Видеомагнитофон / DVD-плеерРусский 16 Подключение Использование компонентного кабеля (до 1080p) или аудиовидеокабеля (только 480i) Доступные устройства: DVD-плейер, Blu-ray-плейер, приставка кабельного телевидения, приемник спутникового телевидения, видеомагнитофон PR PB COMPONENT / AV IN R W R AUDIO OUT R-AUDIO-L VIDEO OUT R W R B G R W R B G R W W W R B R R G Y Y AUDIO OUT R-AUDIO-L COMPONENT OUT PR PB Y R W Y ✎При подключении к разъему AV IN цвет гнезда AV IN [Y/VIDEO] (зеленый) не соответствует цвету штекера видеокабеля (желтый). ✎Для получения лучшего качества изображения рекомендуется использовать компонентное, а не аудиовидеоподключение. Подключение к разъему «Общий интерфейс» (только для европы, Турции, Алжира, Южной Африки и СНГ) Использование модуля «CI или CI+ CARD» Для просмотра платных каналов необходимо вставить модуль «CI или CI+ CARD». x если модуль «CI или CI+ CARD» не установлен, то при попытке просмотра некоторых каналов будет отображаться сообщение «Зашифрованный сигнал». x Информация о подключении, включая телефонный номер, идентификатор модуля «CI или CI+ CARD», идентификатор устройства и другие данные, будет отображаться в течение приблизительно 2–3 минут. если будет отображаться сообщение об ошибке, обратитесь к провайдеру. x Когда конфигурация каналов будет завершена, отобразится сообщение «Обновление завершено», означающее окончание обновления списка каналов. ✎Примечание. x Модуль «CI или CI+ CARD» можно получить у провайдера. x При извлечении модуля «CI или CI+ CARD» будьте осторожны, так как модуль можно повредить, уронив его. x Вставьте модуль «CI или CI+ CARD» в направлении стрелки, изображенной на модуле. x Разъем Общий интерфейс может находиться в разных местах в зависимости от модели. x Модули «CI или CI+ CARD» не поддерживаются в некоторых странах и регионах. Подробную информацию можно получить у авторизованного дилера. x При возникновении проблем обратитесь к провайдеру. x Вставьте модуль «CI или CI+ CARD», поддерживающий текущие настройки антенны. В противном случае на экране могут появиться искажения, или изображение может отсутствовать. Аудиокабель (не входит в комплект поставки) Видеокабель (не входит в комплект поставки) Аудиокабель (не входит в комплект поставки) Красный Белый Красный Синий Зеленый Красный Желтый Белый Устройство Устройство Компонентный кабель (не входит в комплект поставки)Русский 17 Подключение Цифровая аудиосистема Подключение к аудиоустройству и ПК Использование оптического (цифрового) подключения или подключения наушников DIGITAL AUDIO OUT (OPTICAL) Устройства серии TB300 не оснащены разъемом для подключения наушников и оптическим интерфейсом. ✎DIGITAL AUDIO OUT (OPTICAL) x При подключении цифровой аудиосистемы к гнезду DIGITAL AUDIO OUT (OPTICAL) уменьшите громкость LED-дисплея и аудиосистемы. x Многоканальный звук 5.1 доступен при подключении LED-дисплея к внешнему устройству, поддерживающему многоканальный звук. x если включен ресивер (домашний кинотеатр), то звук можно слушать через оптический выход телевизора. если телевизор принимает сигнал цифрового телевидения, то он передает в ресивер домашнего кинотеатра многоканальный звук 5.1. если источник цифрового сигнала, например DVD или Blu-ray-плейер, приставка кабельного телевидения или приемник спутникового телевидения, подключен к телевизору кабелем HDMI, то ресивер домашнего кинотеатра получает только двухканальный звук. Для получения многоканального звука 5.1 подключите DVD или Blu-ray-плейер, приставку кабельного телевидения или приемник спутникового телевидения непосредственно к усилителю или домашнему кинотеатру. ✎Наушники H: Наушники можно подключить к соответствующему выходу телевизора. При подключении наушников встроенные громкоговорители отключаются. x При подключении наушников к LED-дисплею функции воспроизведения звука могут быть ограничены. x Громкость наушников и громкость LED-дисплея регулируются раздельно. Использование кабеля HDMI, HDMI-DVI или D-sub ✎Подключение с помощью кабеля HDMI может не поддерживаться некоторыми компьютерами. Кабель HDMI (не входит в комплект поставки) Кабель HDMI-DVI (не входит в комплект поставки) Стереокабель Стереокабель Кабель D-Sub Русский 18 Подключение Режимы отображения (вход D-Sub и HDMI/DVI) Оптимальное разрешение: 1366 x 768 пикселей (только модель T19B300) Режим отображения Частота горизонтальной развертки (кГц) Частота вертикальной развертки (Гц) Частота обновления пикселей (МГц) Полярность синхронизации (Г/В) Режим Разрешение IBM 720 x 400 70 Гц 31,469 70,087 28,322 -/+ VESA DMT 640 x 480 60 Гц 31,469 59,940 25,175 -/- MAC 640 x 480 67 Гц 35,000 66,667 30,240 -/- VESA DMT 640 x 480 72 Гц 37,861 72,809 31,500 -/- VESA DMT 640 x 480 75 Гц 37,500 75,000 31,500 -/- VESA DMT 800 x 600 60 Гц 37,879 60,317 40,000 +/+ VESA DMT 800 x 600 72 Гц 48,077 72,188 50,000 +/+ VESA DMT 800 x 600 75 Гц 46,875 75,000 49,500 +/+ MAC 832 x 624 75 Гц 49,726 74,551 57,284 -/- VESA DMT 1024 x 768 60 Гц 48,363 60,004 65,000 -/- VESA DMT 1024 x 768 70 Гц 56,476 70,069 75,000 -/- VESA DMT 1024 x 768 75 Гц 60,023 75,029 78,750 +/+ VESA DMT 1280 x 720 60 Гц 45,000 60,000 74,250 +/+ VESA DMT 1366 x 768 60 Гц 47,712 59,790 85,500 +/+ Оптимальное разрешение: 1920 x 1080 пикселей Режим отображения Частота горизонтальной развертки (кГц) Частота вертикальной развертки (Гц) Частота обновления пикселей (МГц) Полярность синхронизации (Г/В) Режим Разрешение IBM 720 x 400 70 Гц 31,469 70,087 28,322 -/+ VESA DMT 640 x 480 60 Гц 31,469 59,940 25,175 -/- MAC 640 x 480 67 Гц 35,000 66,667 30,240 -/- VESA DMT 640 x 480 72 Гц 37,861 72,809 31,500 -/- VESA DMT 640 x 480 75 Гц 37,500 75,000 31,500 -/- VESA DMT 800 x 600 60 Гц 37,879 60,317 40,000 +/+ VESA DMT 800 x 600 72 Гц 48,077 72,188 50,000 +/+ VESA DMT 800 x 600 75 Гц 46,875 75,000 49,500 +/+ MAC 832 x 624 75 Гц 49,726 74,551 57,284 -/- VESA DMT 1024 x 768 60 Гц 48,363 60,004 65,000 -/- VESA DMT 1024 x 768 70 Гц 56,476 70,069 75,000 -/- VESA DMT 1024 x 768 75 Гц 60,023 75,029 78,750 +/+ VESA DMT 1152 x 864 75 Гц 67,500 75,000 108,000 +/+ MAC 1152 x 870 75 Гц 68,681 75,062 100,000 -/- VESA DMT 1280 x 720 60 Гц 45,000 60,000 74,250 +/+ VESA DMT 1280 x 800 60 Гц 49,702 59,810 83,500 -/+ VESA DMT 1280 x 1024 60 Гц 63,981 60,020 108,000 +/+ VESA DMT 1280 x 1024 75 Гц 79,976 75,025 135,000 +/+ VESA DMT 1366 x 768 60 Гц 47,712 59,790 85,500 +/+ VESA DMT 1440 x 900 60 Гц 55,935 59,887 106,500 -/+ VESA DMT 1600 x 900 RB 60 Гц 60,000 60,000 108,000 +/+ VESA DMT 1680 x 1050 60 Гц 65,290 59,954 146,250 -/+ VESA DMT 1920 x 1080 60 Гц 67,500 60,000 148,500 +/+ ✎Примечание, x Режим чересстрочной развертки не поддерживается, x При выборе нестандартного видеоформата телевизор может работать неправильно. x Поддерживаются раздельные и композитные режимы. Синхронизация по зеленому не поддерживается.Русский 19 Подключение Основные функции Навигация в меню Перед использованием LED-дисплея ознакомьтесь с приведенной далее информацией, чтобы научиться использовать меню и выбирать и изменять различные функции. 1 Кнопка ENTERE/кнопки перемещения курсора. Перемещение курсора и выбор элемента меню. Подтверждение настройки. 2 Кнопка RETURN. Возврат в предыдущее меню. 3 Кнопка MENU. Отображение основного экранного меню. 4 Кнопка EXIT. Выход из основного экранного меню. Использование экранного меню Вызов меню может отличаться в зависимости от выбранного меню. 1 MENU m Отображаются функции главного меню: Изображение, Звук, Канал, Система, Поддержка. 2 ▲ / ▼ Выберите символ, нажимая кнопку ▲ или ▼. 3 ENTERE Нажмите кнопку ENTERE, чтобы вызвать подменю. 4 ▲ / ▼ Выберите нужное подменю, нажимая кнопку ▲ или ▼. 5 ◄ / ► Измените значение настройки, нажимая кнопку ◄ или ►. Изменение настройки может отличаться в зависимости от выбранного меню. 6 ENTERE Нажмите кнопку ENTERE, чтобы завершить настройку. 7 EXIT e Нажмите EXIT. Выбор источника сигнала Источник SOURCE s→ Источник Выбор режима телевизора или внешнего источника сигнала, например DVD плеера, Bluray-плеера, кабельной приставки или приставки приема спутникового телевидения. ■ TB / Внешний / ПК / HDMI/DVI / AV / Компонент ✎В списке Источник подключенные входы выделяются. ✎ТВ, ПК и Внешний всегда остаются активными. Редактир. назв. SOURCEs→ TOOLST → Редактир. назв. → ENTERE Когда отображается экран Источник, нажмите кнопку TOOLST. После этого вы сможете переименовать внешние источники сигнала по своему желанию. ■ VCR / DVD / Кабельн. прист. / Спутн. прист. / PVR / АV ресивер / Игра / Камера / ПК/DVI PC / Устройства DVI/ТВ / IP TB / Blu-ray / HD DVD / DMA: Присвойте название подключенному к входным разъемам устройству, чтобы упростить выбор источника сигнала. ✎При подключении ПК к порту HDMI IN (DVI) с помощью кабеля HDMI в LED-дисплее нужно выбрать режим ПК в настройке Редактир. назв.. ✎При подключении ПК к порту HDMI IN (DVI) с помощью кабеля HDMI-DVI в LED-дисплее нужно выбрать режим DVI PC в настройке Редактир. назв.. ✎При подключении аудиовидеоустройства к порту HDMI IN (DVI) с помощью кабеля HDMI-DVI в LED-дисплее нужно выбрать режим Устройства DVI в настройке Редактир. назв.. Информация SOURCEs→ TOOLST→ Информация → ENTERE Можно посмотреть подробную информацию о выбранном внешнем устройстве. 4 2 3 1Русский 20 Основные функции Использование кнопки INFO (телегид текущих и следующих программ) Отображается текущий канал и некоторые настройки звука и изображения. Телегид текущих и следующих программ отображает информацию телевизионной программы для каждого канала в соответствии с временем вещания. x Нажимайте кнопки l и r, чтобы посмотреть информацию о нужной программе во время просмотра текущего канала. (Зависит от каналов.) x Нажимайте кнопки u / d, чтобы просмотреть информацию о других каналах. Для перехода к выбранному в данный момент каналу нажмите кнопку ENTERE. • Отображаемое изображение может отличаться в зависимости от модели. Нет подробной информации. Нет названия. 576i 4:3 SD Итальянский Стерео a Информация 17:02 вторник, 19 июля DTV-ант. Все Coming Soon 5 Использование меню «Канал» Нажмите кнопку CONTENT, чтобы выбрать Дом. стр. содержим., а затем выберите нужное меню. Отображается каждый экран. • Отображаемое изображение может отличаться в зависимости от модели. Дом. стр. содержим. Список каналов Телегид Media Play Диспетчер расписания Источник R Возврат Телегид CONTENT → Дом. стр. содержим. → Телегид → ENTERE Информация электронного телегида предоставляется вещающими компаниями. Используя предоставленное вещающими компаниями расписание программ, можно заранее выбрать программы, которые вы хотите посмотреть, чтобы телевизор автоматически изменил канал на канал выбранной программы в заданное время. Записи программ могут отображаться пустыми или устаревшими в зависимости от состояния канала. Использование меню «Просм. канал.» x a Красный (Дисп. расписания) : Отображение меню Дисп. расписания. x { Зеленый (-24 часа). Просмотр списка программ, которые будут транслироваться в ближайшие 24 часа. x { желтый (+24 часа). Просмотр списка программ, которые будут транслироваться через 24 часа. x } Синий (Реж.кан.). Выбор типа каналов, которые будут отображаться в окне Просм. канал.. x ` (Информация). Отображение подробной информации о выбранной программе. x k (Страница). Переход к следующей или предыдущей странице. x E (Просмотр / Расписание) – При выборе текущей программы можно посмотреть выбранную программу. – При выборе будущей программы можно запланировать просмотр выбранной программы. Чтобы отменить планирование, нажмите кнопку ENTERE еще раз и выберите Отмена расписаний. Диспетчер расписания CONTENT → Дом. стр. содержим. → Диспетчер расписания → ENTERE Можно просматривать, изменять или удалять запланированный просмотр каналов. Использование функции «Просмотр по расписанию» Можно настроить автоматическое отображение выбранного канала в заданное время. Для использования этой функции сначала нужно задать текущее время. 1. Нажмите кнопку ENTERE, чтобы выбрать функцию Диспетчер расписания. 2. Нажмите кнопку TOOLSTили кнопку или a , чтобы вручную добавить программу в расписание. Отображается экран Просмотр по расписанию. 3. Нажимайте кнопки u / d / l / r, чтобы задать настройки Антенна, Канал, Повтор, Дата или Время начала. • Отображаемое изображение может отличаться в зависимости от модели. IL MEDICO E LO STRGONE DTV Air 6 R4 DTT 16:55 - 17:55 IL MEDICO E LO STREGONE - 2 TEMPO a Дисп. расписания b -24 часа { +24 часа } Реж.кан. ` Информация k Страница E Просмотр Сегодня 17:00 17:30 18:00 18:30 Телегид 17:00 вторник, 19 июля Просм. канал. — Все Нет информации Нет информации Нет информации Нет информации IL MEDICO E LO STREGONE 1 1futech 2 24ore.tv 3 BBC World 4 Class News 5 Coming Soon 6 R4 DTT Нет информации TG 4 Нет информации 5 Coming SoonРусский 21 Основные функции x Антенна. Выберите антенный вход. x Канал. Выберите канал. x Повтор: Выберите Один раз, Ручной, Сб-Вс, Пн-Пт или Ежедневно. При выборе настройки Ручной можно задать нужный день. ✎ Выбранная дата отмечается символом c. x Дата. Можно задать дату. ✎ Эта настройка доступна при выборе значения Один раз для настройки Повтор. x Время начала. Можно задать любое время начала. ✎ На экране Информация можно изменить или отменить расписание. x Отмена расписаний. Отмена просмотра программы по расписанию. x Правка. Изменение просмотра программы по расписанию. x Возврат. Возврат на предыдущий экран. Список каналов CONTENT → Список каналов → ENTERE Просмотр списка всех найденных каналов. • Отображаемое изображение может отличаться в зависимости от модели. Список каналов Все 1 1futech 2 24ore.tv 3 BBC World 4 Class News 5 Coming Soon 6 R4 DTT IL MEDICO E LO STREGONE a1 C2 a2 C4 T Сервис L Реж.кан. E Просмотр k Страница ✎При нажатии кнопки CH LIST на пульте дистанционного управления отображается Список каналов. Использование кнопок управления на экране Список каналов. ■ T (Сервис): Нажмите кнопку «Сервис», чтобы вызвать одну из следующих функций. x Просм. прогр..Нажимайте кнопки u / d, чтобы выбрать нужную программу, затем нажмите кнопку ENTERE. (Только для цифрового канала) x Изм. избранное. Сохранение часто просматриваемых каналов в списке избранных каналов. ✎ Выберите Изм. избранное, затем нажмите кнопку ENTERE. – если канал уже добавлен в список избранных каналов, то отображается экран Изм. избранное. x Блокировка / Разблокировка. Блокировка канала, чтобы его нельзя было выбирать и смотреть. ✎ Эта функция доступна, только когда функция «Блокировка канала» включена. ✎ Отображается экран ввода PIN-кода. Введите PIN-код из 4 цифр, значение по умолчанию — «0-0-0-0». PIN-код можно изменить, используя функцию Изменение PIN. x Изменить название канала (Только для аналоговых каналов.): Ввод собственного названия канала. ✎ Эта функция может не поддерживаться в некоторых регионах. x Изм. номера канала: Измените число нажатием соответствующих кнопок с цифрами. ✎ Эта функция может не поддерживаться в некоторых регионах. x Удалить. Можно удалить канал, чтобы в списке отображались только нужные каналы. x Информация. Отображение названия канала, разрешения, режима изображения и других данных (некоторые данные доступны только для цифровых каналов). x Сортировка. Сортировка каналов по названию канала или по номеру канала. (Только для цифрового канала) x Изменить антенну. Выбор настройки Антенна или Кабель. x Режим ред.: Можно выбрать нужные каналы и изменить их. ■ l r (Реж.кан.): Перемещение в тип каналов, которые будут отображаться на экране Список каналов. ✎ Эта опция может зависеть от страны. ■ E (Просмотр / Информация): Просмотр выбранного канала. / Отображение подробной информации о выбранной программе. ■ k (Страница): Переход к следующей или предыдущей странице. Использование функции Просмотр по расписанию на экране Список каналов (зависит от каналов) При выборе функции Просмотр по расписанию на экране Список каналов можно выбрать программы на экране Просм. прогр.. 1. Нажмите кнопку CH LIST и выберите нужный цифровой канал. 2. Нажмите кнопку TOOLST и выберите Просм. прогр.. 3. Нажимайте кнопки u / d, чтобы выбрать нужную программу, затем нажмите кнопку E (Информация). 4. Выберите Просмотр по расписанию, затем нажмите кнопку ENTERE, когда выбор будет завершен. ✎Для отключения функции Просмотр по расписанию выполните этапы 1–3 и выберите Отмена расписаний.Русский 22 Основные функции Меню «Канал» ¦ Повторная настройка каналов MENUm→ Канал → ENTERE Перед запоминанием доступных каналов необходимо выбрать тип Источник сигнала (Антенна / Кабель)t источника сигнала, подключенного к LED-дисплею. Страна (Зависит от страны.) Отображается экран ввода PIN-кода. Введите PIN-код из 4 цифр. ✎Выберите страну, чтобы LED-дисплей смогу автоматически настроить широковещательные каналы. ■ Цифровой канал: Выбор страны для цифровых каналов. ■ Аналоговый канал: Выбор страны для аналоговых каналов. Автонастройка (Зависит от страны.) ✎Автоматически назначенные номера программ могут не соответствовать фактическим или желаемым номерам программ. если канал заблокирован с использованием функции Блокировка канала, то отображается окно ввода PIN-кода. ■ Автонастройка – Антенна / Кабель: Выберите источник сигнала телевещания для запоминания каналов. Цифр. и аналог. / Цифровые / Аналоговые: Выберите источник каналов для запоминания. ✎ При выборе настройки Кабель → Цифр. и аналог. или Цифровые: задайте значение сканирования кабельных каналов. x Режим поиска (Полный / Сеть / Быстрый): выбор режима поиска:Полный / Сеть / Быстрый. x Сеть (Авто / Ручной). Для параметра Идентиф. cети выберите настройку Автоматически или Вручную. x Идентиф. cети: При выборе для параметра Сеть значения Вручную можно задать Идентиф. cети, используя цифровые кнопки. x Частота. Отображение частоты канала. (Разная в каждой стране.) x Модуляция. Отображение доступных значений модуляции. x Скорость передачи. Отображение доступных скоростей передачи. ■ Кабельные параметры поиска (Зависит от страны.) Задание дополнительный параметров поиска, например частоты и скорости передачи для кабельной сети. – Нач. частота / Конечная частота.: Задание начальной и конечной частоты (разные в каждой стране). – Скорость передачи: Отображение доступных скоростей передачи. – Модуляция: Отображение доступных значений модуляции. Настройка вручную Ручной поиск каналов и их сохранение в памяти LED-дисплея. ✎если канал заблокирован с использованием функции Блокировка канала, то отображается окно ввода PIN-кода. ■ Настройка цифровых каналов: Поиск цифрового канала. 1. Нажмите кнопку ENTERE, чтобы выбрать Создать. ✎ При выборе Антенна → Антенна. Канал, Частота, Полоса пропуск. ✎ При выборе Антенна → Кабель. Частота, Модуляция, Скорость передачи 2. Нажмите кнопку d, чтобы выбрать Поиск. После завершения поиска канал обновляется в списке каналов. ■ Настройка аналоговых каналов: Поиск аналогового канала. 1. Нажмите кнопку ENTERE, чтобы выбрать Создать. 2. Задайте настройки Программа, Система цвета, Система звука, Канал и Поиск. 3. Нажмите кнопку d, чтобы выбрать Сохранить. После завершения поиска канал обновляется в списке каналов. Передача списка кан. Отображается экран ввода PIN-кода. Введите PIN-код из 4 цифр. Импорт или экспорт таблицы каналов. Для использования этой функции нужно подключить запоминающее устройство USB. ■ Импорт с USB: Импорт списка каналов из USB-устройства. ■ Экспорт на USB: Экспорт списка каналов в USB-устройство. Эта функция доступна при подключении USB-устройства. ✎Формат USB должен быть FAT32. Точная настройка (Только для аналоговых каналов.) При уверенном приеме точная настройка каналов не нужна, так как она выполняется во время поиска и сохранения каналов. При слабом или искаженном сигнале выполните точную ручную настройку канала. Прокручивайте влево или вправо, пока изображение не станет четким. ✎Настройки применяются к просматриваемому в данный момент каналу. ✎Каналы с точной настройкой сохраняются и отмечаются в списке каналов звездочкой «*» справа от номера канала. ✎Для отмены точной настройки выберите Сброс.Русский 23 Основные функции Меню «Изображение» ¦ Смена предварительной настройки «Реж. изображения» MENUm→ Изображение → Реж. изображения → ENTERE Выберите тип изображения. Реж. изображения t ✎При подключении к ПК для настройки Реж. изображения доступны только значения Стандартный и Развлекат. ■ Динамический: Подходит для светлого помещения. ■ Стандартный: Подходит для обычных условий. ■ Кино: Подходит для просмотра фильмов в темном помещении. ■ Развлекат: Подходит для просмотра фильмов и игр. ✎ Эта настройка доступна только при подключении к ПК. ¦ Настройка изображения MENUm→ Изображение → ENTERE Samsung MagicAngle Регулировка угла просмотра экрана для оптимизации качества изображения в соответствии с вашим положением при просмотре. ■ Samsung MagicAngle: При просмотре под углом снизу или сверху, выбирая соответствующий режим для каждого положения, можно добиться такого же качества изображения, как при просмотре из положения прямо пред экраном. x Выкл.. Выберите этот режим при просмотре из положения прямо пред экраном. x Режим комфорта. Выберите этот режим, если вы смотрите на экран снизу. x Вертикально. Выберите этот режим, если вы смотрите на экран сверху. ■ Режим.: Настройка угла просмотра экрана. ✎если для настройки Samsung MagicAngle выбран режим Режим комфорта или Вертикально, то настройка Гамма недоступна. Подсветка / Контраст / Яркость / Четкость / Цвет / Тон(З/К) У телевизора есть несколько настроек управления качеством изображения. ✎Примечание. x В аналоговых режимах TV, PC, AV для телевизионной системы PAL настройка Тон(З/К) недоступна. x При подключении ПК можно изменять только настройки Подсветка, Контраст, Яркость и Четкость. x Настройки можно изменять и сохранять для каждого внешнего устройства, подключенного к LED-дисплею. x Уменьшение яркости изображения сокращает энергопотребление. Настройка экрана ■ Размер картинки: Приставка кабельного телевидения или приемник спутникового телевидения могут иметь свой собственный набор форматов изображения. Однако, рекомендуется использовать в основном режим 16:9. Широкий aвто: Автоматическое изменение размера изображения для получения соотношения сторон 16:9. 16:9. Широкоформатное изображение с соотношением сторон 16:9. Широк. увел.: Увеличение размера изображения более 4:3. ✎ Измените настройку Позиция, используя кнопки u / d. Увеличенный: Увеличение по вертикали широкоформатного изображения с соотношением сторон 16:9 по размеру экрана. ✎ Измените настройки Увеличенный или Позиция. используя кнопки u / d. 4:3. Базовый режим отображения (с соотношением сторон 4:3). ✎ Не смотрите изображение в формате 4:3 в течение длительного времени. Следы от полей слева, справа и по центру экрана могут вызвать остаточное изображение (выгорание экрана), на которое не распространяется гарантия. По разм. экрана: Отображение полного изображения без обрезания для сигнала со входа HDMI (720p / 1080i / 1080p) или с компонентного входа (720p / 1080i / 1080p). ✎ Измените настройку Позиция, используя кнопки u / d / l / r. ✎Примечание. x Доступные настройки размера изображения могут различаться в зависимости от источника сигнала. x Доступные настройки могут отличаться в зависимости от выбранного режима. x При подключении к ПК можно настроить только режимы 16:9 и 4:3. x Настройки можно изменять и сохранять для каждого внешнего устройства, подключенного к входу LED-дисплея. x При выборе настройки По разм. экрана для входного сигнала HDMI 720p 1 строка будет обрезаться вверху, внизу, слева и справа. ■ Увеличенный / Позиция: можно настроить размер и положение изображения с помощью кнопки u / d / l / r. ✎ Эта функция доступна, только когда выбран размер изображения Увеличенный или Широк. увел.. ✎ В режиме Широк. увел. можно изменять только позицию. ✎ Сброс. Сбросьте параметры Увеличенный и Позиция до значений по умолчанию. ■ Размер экрана 4:3 (16:9 / Широк. увел. / Увеличенный / 4:3). Эти настройки доступны только при выборе для размера изображения режима Широкий aвто. Можно выбрать размер картинки 4:3 с широкоформатным преобразованием или оригинальный размер. Для каждой европейской страны требуется разный размер картинки. ✎ Настройка недоступна в режимах HDMI, Компонентный и HDMI/DVI.Русский 24 Основные функции ■ Настройка экрана ПК ✎ Настройка доступна только в режиме ПК. x Грубо / Точно. Удаление или снижение шумности картинки. если шум не удаляется только функцией «Точно», то отрегулируйте частоту как можно точнее (Грубо), а затем повторите настройку «Точно». После уменьшения шума снова настроите изображение, чтобы оно располагалось в центре экрана. x Позиция. Настройте положение экрана ПК с помощью кнопок направления (u / d / l / r). x Сброс настр.: Восстановление стандартных настроек изображения. Значения частоты/положения и точная настройка выбираются Автоподстройкаt автоматически. ✎Эта функция доступна только в режиме ПК. Использование телевизора в качестве компьютерного монитора Настройка ПО компьютера (на примере Windows XP). В зависимости от версии Windows и модели видеокарты фактические окна настроек ПК могут отличаться. В этом случае практически всегда можно использовать базовую информацию о настройке. (если это невозможно, обратитесь к изготовителю компьютера или дилеру Samsung.) 1. В меню «Пуск» Windows выберите «Панель управления». 2. В окне «Панель управления» выберите «Оформление и темы». Отобразится диалоговое окно настроек дисплея. 3. Нажмите «Дисплей», откроется диалоговое окно настроек дисплея. 4. В диалоговом окне настроек дисплея перейдите на вкладку «Параметры». x Правильная настройка размера (разрешения) [Оптимальное: 1920 x 1080 пикселей]. (T19B300: 1366 x 768 пикселей) x если в диалоговом окне настроек дисплея имеется параметр «Частота развертки по вертикали», выберите значение «60» или «60 Гц». если этого параметра нет, просто нажмите «ОК» и закройте диалоговое окно. Правильная осанка при использовании изделия При использовании изделия следите за правильностью осанки. x Выпрямите спину. x Расстояние между глазами и экраном должно составлять 45~50 см. Смотрите на экран прямо и вниз. x Отрегулируйте угол наклона изделия так, чтобы свет не отражался от экрана. x Локти должны быть согнуты под прямым углом, а руки должны находиться на одном уровне с задней стороной кисти. x Согните локти под прямым углом. x Поставьте пятки на пол и согните колени под углом 90 градусов или более. Расположите руки так, чтобы они находились ниже сердца. ¦ Изменение параметров изображения Дополнительные параметры MENUm→ Изображение → Дополнительные параметры → ENTERE (Дополнительные параметры доступны в режимах Стандартный и Кино.) По сравнению с предыдущими моделями новые LED-дисплеи Samsung имеют более четкое изображение. ✎При подключении ПК можно изменять только настройку Баланс белого. Дополнительные параметры Режим только RGB Выкл. Цвет. пространство Исходный Баланс белого Гамма 0 Автоконтраст Высокий Черный тон Выкл. Телесный оттенок 0 ■ Автоконтраст (Выкл. / Низкий / Средний / Высокий): Настройка контрастности экрана. ■ Черный тон (Выкл. / Темный / Темнее / Самый темный): Выбор уровня черного для настройки глубины изображения. ■ Телесный оттенок: Подчеркивание розового «телесного оттенка». ■ Режим только RGB (Выкл. / Красный / Зеленый / Синий): Отображение регуляторов цветов Красный, Зеленый и Синий для точной настройки оттенка и насыщенности. ■ Цвет. пространство (Авто / Исходный): Настройка цветового пространства создания изображения. ■ Баланс белого: Настройка баланса белого для получения более естественного изображения. К: смещ. / З: смещ. / С: смещ:. Настройка смещения каждого цвета (красный, зеленый, синий). К: усил. / З: усил. / С: усил:. Настройка усиления каждого цвета (красный, зеленый, синий). Сброс: Восстановление стандартных значений настройки Баланс белого. ■ Гамма: Настройка интенсивности основного цвета. ■ Подсветка движения (Выкл. / Вкл.): Сокращение энергопотребления с помощью регулировки яркости.Русский 25 Основные функции Параметры изображения MENUm→ Изображение → Параметры изображения → ENTERE ✎При подключении ПК можно изменять только настройку Оттенок. Параметры изображения Оттенок Стандартный Цифр. фильтр шумов Авто Фильтр шумов MPEG Авто Черный HDMI Низкий Режим "фильм" Выкл. ■ Оттенок (Хол. / Стандартный / Теплый1 / Теплый2) ✎ Настройки Теплый1 или Теплый2 отключаются при выборе режима изображения Динамический. ✎ Настройки можно изменять и сохранять для каждого внешнего устройства, подключенного к входу LED-дисплея. ■ Цифр. фильтр шумов (Выкл. / Низкий / Средний / Высокий / Авто / Автовизуализация): При приеме слабого сигнала можно включить функцию Цифр. фильтр шумов, чтобы уменьшить статические изображения и дублирование, которые могут появляться на экране. ✎ При слабом сигнале попробуйте изменять другие настройки, пока не будет получено наилучшее изображение. Автовизуализация: Отображение уровня сигнала при переключении аналоговых каналов. ✎ Функция доступна только для аналоговых каналов. ✎ Полоса зеленого цвета означает прием сигнала максимального доступного уровня. ■ Фильтр шумов MPEG (Выкл. / Низкий / Средний / Высокий / Авто): Уменьшение шумов MPEG для улучшения качества изображения. ■ Черный HDMI (Низкий / Норм.): Выбор уровня черного для настройки глубины изображения на экране. ✎ Настройка доступна только в режиме HDMI (сигналы RGB). ■ Режим «фильм» (Выкл. / Авто1 / Авто2): Функция автоматического распознавания просмотра фильмов со всех источников сигнала и настройки изображения для достижения оптимального качества. ✎ Доступно в ТВ-режиме, HDMI (1080i). ✎ если изображение не выглядит естественным, измените настройку на Выкл. / Авто1 / Авто2 в режиме Режим «фильм». Сброс изображения (Да / Нет) Восстановление стандартных настроек для текущего режима изображения. Меню «Звук» ¦ Смена предварительной настройки «Режим звука» MENUm→ Звук → Режим звука → ENTERE ■ Режим звука Стандартный: Выбор стандартного режима звука. t ■ Музыка: Выделение музыки по отношению к голосу. ■ Кино: Оптимальная настройка звука для фильмов. ■ Четкий голос: Выделение голоса по отношению к другим звукам. ■ Усиление: Повышение интенсивности высокочастотных звуков для людей с нарушениями слуха. ✎если для настройки Выбрать громкогов. выбрано значение Внеш. Ресивер., то настройка Режим звука недоступна. ¦ Изменение настроек звука Звуковой эффект MENUm→ Звук → Звуковой эффект → ENTERE (Только для стандартного режима звука.) ■ Эта функция позволяет добиться эффекта объемного SRS TruSurround HD(Выкл. / Вкл.) t звучания виртуальной 5.1-канальной системы при воспроизведении через два громкоговорителя или наушники за счет применения технологии HRTF (Head Related Transfer Function). ■ SRS TruDialog (Выкл. / Вкл.) Эта функция позволяет усилить звук голоса по сравнению с фоновой музыкой или звуковыми эффектами, чтобы диалоги звучали более четко. ■ Эквалайзер Настройка режима звука. – Баланс L/R. Регулировка баланса между правым и левым громкоговорителем. 100Гц / 300Гц / 1кГц / 3кГц / 10кГц (Настройка диапазона частот). Настройка уровня громкости определенного диапазона частот. – Сброс. Восстановление стандартных настроек эквалайзера.Русский 26 Основные функции ¦ Системы звука и т. д. MENUm→ Звук → ENTERE Параметры передачи звука ■ Язык аудио (Только для цифровых каналов.) Выбор языка звука по умолчанию. ✎ Доступные языки могут различаться в зависимости от передачи. ■ Аудиоформат (Только для цифровых каналов.) Выбор аудиоформата. ■ Описание аудио (Функция доступна не во всех регионах, только для цифровых каналов.) Эта функция обрабатывает аудиопоток AD (Описание аудио), который передается вместе с основным аудиопотоком. ✎ Описание аудио (Выкл./Вкл.). Включение и выключение функции описания аудио. ✎ Громкость. Регулировка громкости описания аудио. Дополнительные настройки (Только для цифровых каналов.) ■ Уровень звука DTV (MPEG / HE-AAC): Эта функция позволяет уменьшить различие между уровнем звукового сигнала (который является одним из сигналов, принимаемых при цифровом телевизионным вещании) и требуемым уровнем громкости. ✎ В зависимости от типа передаваемого сигнала настройку MPEG / HE-AAC можно изменять в диапазоне от -10 дБ до 0 дБ. ✎ Для увеличения или уменьшения громкости изменяйте настройку в диапазоне от 0 до -10. ■ Выход SPDIF: Интерфейс SPDIF (Sony Philips Digital InterFace) используется для передачи цифрового звука на громкоговорители и различные цифровые устройства, например DVD плееры, с уменьшением помех. – Аудиоформат: Можно выбрать формат цифрового аудиовыхода (SPDIF). ✎ Доступные форматы цифрового аудиовыхода (SPDIF) могут различаться в зависимости от источника сигнала. – Автозадержка: Исправление проблем с синхронизацией звука при просмотре телевизионных передач или видео и при прослушивании цифрового звука с использованием внешнего устройства, например АV ресивера (0-250 мс). ✎ Эта функция недоступна для устройств серии TB300. ■ Комп Dolby Digital (Line / RF): Эта функция минимизирует разницу между сигналом Dolby Digital и звуковым сигналом (например, MPEG Audio, HE-AAC, ATV Sound). ✎ Выберите Line, чтобы получить динамический звук и RF, чтобы уменьшить разницу между громкими и приглушенными звуками в ночное время. Line: Для сигналов с громкостью больше или меньше -31 дБ (исходное значение) задается уровень выходного сигнала -20 дБ или -31 дБ. RF: Для сигналов с громкостью больше или меньше -20 дБ (исходное значение) задается уровень выходного сигнала -10 дБ или -20 дБ. Настройка громкоговор. ■ Выбрать громкогов: (Внеш. Ресивер. / Громкогов. ТВ).Возможно появление эхо из-за разницы скорости кодирования основного громкоговорителя и аудиоресивера. В этом случае выберите настройку Внеш. Ресивер.. ✎ если для параметра Выбрать громкогов. установлено значение Внеш. громк., то кнопка регулировки громкости и кнопка MUTE не работают и, соответственно, ограничиваются возможности настройки звука. ✎ если для настройки Выбрать громкогов. выбрано значение Внеш. Ресивер.. x Громкогов. ТВ: Выкл., Внеш. Ресивер.: Вкл. ✎ если для настройки Выбрать громкогов. выбрано значение Громкогов. ТВ.. x Громкогов. ТВ: Вкл., Внеш. Ресивер.: Вкл. ✎ если нет видеосигнала, то звук отключается в обоих громкоговорителях. ✎ Эта функция недоступна для устройств серии TB300. ■ Громкость авто (Выкл. / Норм. / Ночь): Для выравнивая громкости во всех каналах выберите значение Норм.. Ночь: В этом режиме звучание улучшается по сравнению с режимом Норм., и практически не создается шум. Этот режим целесообразно использовать ночью. Сброс звука (Да / Нет) Восстановление стандартных значений всех настроек звука. ¦ При выборе функции Выбор режима звука Dual fg, на экране отображается текущий t режим звука. Тип звука Dual f-g По умолчанию A2 стерео Моно Моно Автоматическое Стерео Стерео ↔ Моно изменение Dual Dual f ↔ Dual g Dual f NICAM Стерео Моно Моно Автоматическое Стерео Моно ↔ Стерео изменение Dual Моно ↔ Dual f  Dual g  Dual f ✎если сигнал Стерео слаб, и включено автоматическое переключение, то осуществляется переключение в режим Моно. ✎Включается только для стереозвука. ✎Доступно, только если для настройки Источник выбрано значение ТВ.Русский 27 Основные функции Меню «Система» ¦ Настройка времени MENUm→ Система → ENTERE Время ■ Часы: Настройка времени для использования различных функций таймера LED-дисплея. ✎ Текущее время отображается при нажатии кнопки INFO. ✎ После отключения кабеля питания время нужно устанавливать снова. Режим часов (Авто / Ручной) x Авто. Автоматическая установка времени с использованием сигнала цифрового канала. ✎ Для автоматической установки времени необходимо подключить антенну. x Ручной. Ввод текущего времени вручную. ✎ В зависимости от вещательной станции и сигнала автоматическая настройка времени может оказаться неправильной. В этом случае введите время вручную. Установка часов:. Вручную введите Число, Месяц, Год, Часы и Минуты. ✎ Настройка доступна, только если для режима Режим часов выбрано значение Ручной. ✎ Значения Число, Месяц, Год, Часы и Минуты можно ввести, нажимая цифровые кнопки на пульте ДУ. Часовой пояс (Авто / Ручной) (зависит от страны). Выбор часового пояса. ✎ Эта функция доступна, только если для режима Режим часов выбрано значение Авто. – GMT(GMT-3:00~GMT-1:00 / GMT / GMT+1:00~GMT+ 12:00): Выберите часовой пояс. ✎ Эта функция доступна, только если для настройки Часовой пояс выбрано значение Ручной. – Летнее время (Выкл. / Вкл.). Включение или отключение поддержки летнего времени. ✎ Эта функция доступна, только если для настройки Часовой пояс выбрано значение Ручной. Использование таймера сна ■ Таймер сна t: Автоматическое выключение LED-дисплея через заданный период времени. (30, 60, 90, 120, 150 и 180 минут). ✎ Чтобы отключить функцию Таймер сна, выберите Выкл.. Настройка таймера включения / выключения ■ Таймер включения Таймер включения 1 / Таймер включения 2 / Таймер включения 3: Можно настроить три разных таймера включения. Сначала нужно настроить часы. Таймер включения 1 Настройка Выкл. Время 0:00 Громкость 20 Источник ТВ Антенна DTV Канал 1 Вс Пн Вт Ср Чт Пт Сб R Возврат Закрыть Настройка: Выберите Выкл., Один раз, Ежедневно, Пн-Пт, Пн-Cб, Сб-Вс или Ручной. При выборе настройки Ручной можно выбрать день включения таймера. ✎ Выбранные дни отмечаются символом c. Время: Введите часы и минуты. Громкость: Задайте уровень громкости. Источник: Выберите желаемый источник сигнала, когда LED- дисплей включится автоматически. (USB можно выбрать, только если к LED-дисплею подключено USB-устройство) Антенна (если для настройки Источник выбрано значение ТВ). Выберите ATV или DTV. Канал (если для настройки Источник выбрано значение ТВ). Выберите канал. Музыка / Фото (если для настройки Источник выбрано значение USB). Выберите папку USB-устройства, содержащую музыкальные файлы или фотографии, которые будут воспроизводиться при автоматическом включении LED-дисплея. ✎ Примечание. x если USB-устройство не содержит музыкальных файлов или не выбрана папка с музыкальными файлами, то функция таймера не будет работать правильно. x если в USB-устройстве только одна фотография, то слайд-шоу не будет воспроизводиться. x Нельзя выбрать папку с очень длинным именем. x Каждому USB-устройству назначается собственная папка. если используется несколько USB-устройств одного типа, то следует следить за тем, чтобы у назначаемых каждому USB-устройству папок были разные имена. x При использовании функции Таймер включения рекомендуется подключать флеш-накопители USB и кард-ридеры. x Функция Таймер включения может не работать с USB- устройствами со встроенными аккумуляторами, MP3 плеерами или портативными медиаплеерами некоторых изготовителей, так распознавание этих устройств осуществляется очень долго.Русский 28 Основные функции ■ Таймер выключения Таймер выключения 1 / Таймер выключения 2 / Таймер выключения 3: Можно настроить три разных таймера выключения. Сначала нужно настроить часы. Таймер выключ. 1 Настройка Выкл. Время 0:00 Вс Пн Вт Ср Чт Пт Сб R Возврат Закрыть Настройка: Выберите Выкл., Один раз, Ежедневно, Пн-Пт, Пн-Cб, Сб-Вс или Ручной. При выборе настройки Ручной можно выбрать день включения таймера. ✎ Выбранные дни отмечаются символом c. Время: Введите часы и минуты. ¦ Блокировка программ MENUm→ Система → Защита → ENTERE Защита ✎Перед выводом экрана настройки отображается экран ввода PIN-кода. ✎Введите PIN-код из 4 цифр, значение по умолчанию — «0-0-0-0». PIN-код можно изменить, используя функцию Изменение PIN. ■ Блокировка канала (Выкл. / Вкл.): На экране Диспетчер каналов можно заблокировать каналы, например, чтобы дети не смогли смотреть непредназначенные для них программы. ✎ Функция доступна, только если для настройки Источник выбрано значение ТВ. ■ Блокировка программ (зависит от страны). Предотвращение неавторизованного использования, например, просмотра детьми непредназначенных для них программ, с помощью PIN-кода из 4 цифр. если выбранный канал заблокирован, то отображается символ «\». ✎ Элементы экране Блокировка программ различаются в зависимости от страны. ■ Изменение PIN: Отображается экран Изменение PIN. Введите любые 4 цифры, которые будут вашим PIN-кодом. Изменение личного идентификационного номера (PIN) необходимо для настройки LED- дисплея. Введите эти четыре цифры еще раз. После отображения экрана подтверждения PIN-код запоминается. ¦ Экономный режим MENUm→ Система → Экономный режим → ENTERE Экономный режим ■ tЭкон. энергии (Выкл. / Низкий / Средний / Высокий / Откл. экран) : Эта функция регулирует яркость LED-дисплея для уменьшения потребления электроэнергии. При выборе настройки Откл. экран изображение выключается и остается только звук. Для включения изображения нажмите любую кнопку, кроме кнопки регулировки громкости. ■ Режим ожидания (Выкл. / 15 мин / 30 мин / 60 мин): Чтобы предотвратить ненужное потребление электроэнергии, укажите, в течение какого времени LED-дисплей будет оставаться включенным, если он не принимает сигнал. ✎ Функция недоступна, если ПК находится в режиме энергосбережения. ■ Автовыключение (Выкл. / Вкл.): Экономия энергии посредством выключения LED-дисплея, если никакие действия не выполнялись в течение 4 часов. ¦ Другие функции MENUm→ Система → ENTERE Язык ■ Язык меню: Выбор языка меню. ■ Язык телетекста: Выбор языка телетекста. ✎ если выбранный язык вещания недоступен, то выбирается английский язык. ■ Предпочитаемый язык (Основное аудио / Дополнит. аудио / Основные субтитры / Дополнит. субтитры / Основной телетекст / Дополнит. телетекст): Выберите язык, который будет языком по умолчанию при выборе канала. Субтитры Используйте это меню для выбора режима Субтитры. ■ Субтитры (Выкл. / Вкл.): Включение или отключение субтитров. ■ Режим субтитров (Норм. / С нарушен. слуха): Выбор режима субтитров. ■ Язык субтитров: Выбор языка субтитров. ✎ если просматриваемая программа не поддерживает субтитры С нарушен. слуха, то автоматически включаются субтитры По предпочтениям, даже если выбран режим С нарушен. слуха. ✎ если выбранный язык вещания недоступен, то выбирается английский язык.Русский 29 Основные функции Цифровой текст (Отключить / Включить) (Только для Великобритании.) если программа передается с цифровым текстом, то эта функция включена. Время автозащиты ■ Выкл. / 2 часа / 4 часа / 8 часов / 10 часов: если на экране остается неподвижное изображение в течение заданного пользователем времени, то включается заставка, чтобы предотвратить образование на экране остаточных изображений. Общие ■ Макс. энергосбер. (Выкл. / Вкл.): Отключение монитора компьютера, если компьютер не используется в течение определенного времени, что сократить энергопотребление. ■ Игр. режим (Выкл. / Вкл.): При подключении игровой консоли, например PlayStation™ или Xbox™, можно получить более реалистичное изображение, выбрав игровой режим. ✎Примечание. x Меры предосторожности и ограничения для игрового режима – Чтобы отключить игровую консоль и подключить другое внешнее устройство в для настройки Игр. режим выберите значение Выкл. в меню настройки. – При отображении меню LED-дисплея в режиме Игр. режим изображение слегка дрожит. x Игр. режим недоступен, если выбран источник сигнала ТВ или ПК x После подключения игровой консоли для настройки Игр. режим выберите значение Вкл.. К сожалению, вы можете заметить ухудшение качества изображения. x если для настройки Игр. режим выбрано значение Вкл. – Для настройки Реж. изображения задается значение Стандартный, а для настройки Режим звука задается значение Кино. ■ Блокировка панели (Выкл. / Вкл.): Одновременная блокировка или разблокирование всех кнопок на передней панели. если включена «Блокировка панели», то ни одна из кнопок на передней панели не работает. ■ Логот. загрузки (Выкл./Вкл.): Отображение логотипа Samsung при включении LED-дисплея. Общий интерфейc ■ Меню CI: Это меню позволяет выбирать функции меню CAM. Выбор меню CI на основе меню CI карты. ■ Инфо о приложении: Просмотр информации и модуле CAM, вставленном в разъем CI и о карте «CI или CI+ CARD», вставленной в модуль CAM. Модуль CAM можно вставлять во включенный или в выключенный LED-дисплей. 1. Модуль CI CAM можно приобрести у ближайшего дилера, или позвонив по телефону. 2. Надежно вставьте карту «CI или CI+ CARD» в модуль CAM в направлении стрелки. 3. Вставьте модуль CAM с картой «CI или CI+ CARD» в разъем общего интерфейса в направлении стрелки так, чтобы он был выровнен параллельно разъему. 4. Проверьте, можете ли вы смотреть изображение на зашифрованных каналах. ¦ Картинка в картинке (PIP) MENUm→ Система → PIP → ENTERE Можно одновременно смотреть изображение приемника LEDPIP t дисплея и одного внешнего источника видеосигнала. Функция PIP (Картинка в картинке) не работает для того же режима. ✎Примечание. x Выбор источника звука в режиме PIP описан в разделе Выбор звука. x если выключить LED-дисплей при просмотре изображения в режиме PIP, то окно PIP исчезает. x Можно заметить, что изображение в окне PIP выглядит слегка неестественно при использовании основного экрана для просмотра игры или караоке. x если включена Блокировка программ, использовать функцию PIP нельзя. x Настройки PIP Основное изображение Дополнительное изображение HDMI, HDMI (ПК), Компонент, ПК ТВ ■ PIP (Выкл. / Вкл.): Включение или выключение функции PIP. ■ Канал: Выберите канал дополнительного изображения. ■ Размер (Õ / Ã): Выберите размер дополнительного изображения. ■ Позиция (à / – / — / œ): Выберите положение дополнительного изображения. ■ Выбор звука (Основной / Дополнит.): Можно выбрать источник звука (Основной / Дополнит.) в режиме PIP. ¦ DivX® видео по запросу Отображение регистрационного кода, авторизованного для телевизора. Посетив веб-сайт DivX и зарегистрировавшись, можно загрузить регистрационный файл VOD. Для завершения регистрации воспроизведите регистрацию VOD как медиасодержимое. ✎Для получения дополнительной информации о DivX® VOD посетите веб-сайт http://vod.divx.com.Русский 30 Основные функции Меню «Поддержка» MENUm→ Поддержка → ENTERE Самодиагностика ✎Самодиагностика может продолжаться несколько секунд. Это часть нормальной работы LED-дисплея. ■ Тест изображения (Да / Нет): Используется для проверки изображения. Да: если тестовое изображение не появляется, или если на нем имеются помехи, выберите Да. Возможно, LED-дисплей неисправен. Обратитесь за поддержкой в операторский центр Samsung. Нет: если тестовое изображение отображается корректно, выберите Нет. Возможно, проблема с внешним оборудованием. Проверьте подключения. если проблема сохранится, изучите инструкцию по эксплуатации внешнего устройства. ■ Звуковой тест (Да / Нет): Использование встроенной тестовой мелодии для проверки звука. Да: если во время звукового теста звучит только один громкоговоритель, или звука нет, выберите Да. Возможно, LED- дисплей неисправен. Обратитесь за поддержкой в операторский центр Samsung. Нет: если вы слышите звук из громкоговорителей, выберите Нет. Возможно, проблема с внешним оборудованием. Проверьте подключения. если проблема сохранится, изучите инструкцию по эксплуатации внешнего устройства. ■ Информ. о сигнале: (Только для цифровых каналов.) Каналы высокой четкости либо принимаются с отличным качеством, либо недоступны. Отрегулируйте антенну, чтобы увеличить уровень сигнала. ■ Сброс: Восстановление стандартных значений всех настроек, кроме настроек сети. Обновление ПО Обновление ПО можно выполнить, используя широковещательный сигнал, или загрузив новую версию встроенного ПО с сайта www. samsung.com на USB-накопитель. Текущая версия ПО уже установлена в LED-дисплее. ✎Информация о ПО указывается как «Год/Месяц/Число_Версия». Обновление ПО По USB По каналу Альтернативное ПО обеспечение Обновление в реж. ожидан. Через 2 часа Установка последней версии ■ По USB: Вставьте в телевизор USB-накопитель с файлом обновления ПО, загруженным с сайта www.samsung. com. Будьте осторожны — не отключайте питание и не извлекайте USB-накопитель, пока обновление не будет завершено. После завершения обновления ПО телевизор автоматически выключается и снова включается. После обновления ПО восстанавливаются стандартные настройки изображения и звука. Рекомендуется записать ваши настройки, чтобы их можно было легко восстановить после обновления. ■ По каналу: Обновление ПО с использованием широковещательного сигнала. ✎ При выборе этой функции во время передачи ПО выполняется автоматический поиск и загрузка ПО. ✎ Необходимое для загрузки ПО время определяется состоянием сигнала. ■ Альтернативное ПО: Замените текущее программное обеспечение альтернативным. ■ Обновление в реж. ожидан. (Выкл. / Через 1 час / Через 2 часа / 00:00 / 02:00 / 12:00 / 14:00). Обновление будет автоматически выполнено в выбранное время. Так как питание устройства включается, экран может слегка светиться. Это может продолжаться более одного часа, пока обновление ПО не будет завешено. Обращение в Samsung Ознакомьтесь с этой информацией, если LED-дисплей неисправен, или если вы хотите обновить ПО. Вы можете получить информацию о наших центрах поддержки и о загрузке ПО. Дом. стр. содержим. Вы можете получить удовольствие от разного полезного содержимого. Боковая панель телевизора USB-накопительРусский 31 Дополнительные функции Вы можете просматривать видео и фотографии и слушать музыку, сохраненную на запоминающем устройстве USB. 1. Нажмите кнопку CONTENT. 2. Нажимайте кнопки l / r, чтобы выбрать меню (Media Play), затем нажмите кнопку ENTERE. CONTENT → Media Play → ENTERE Использование функции Media Play ¦ Подключение USB-устройства 1. Включите телевизор. 2. Подключите USB-устройство с фотографиями и музыкальными файлами к разъему USB на боковой стороне телевизора. 3. После подключения USB-устройства к телевизору появляется всплывающее окно. В нем можно выбрать подсоединенное устройство. ✎Функция может не работать должным образом с нелицензионными мультимедийными файлами. ✎Что нужно знать перед использованием функции Media Play? x Протокол MTP (Media Transfer Protocol — Протокол передачи мультимедийных данных) не поддерживается. x Поддерживаются файловые системы FAT16, FAT32 и NTFS. x Некоторые типы цифровых камер и аудиоустройств с интерфейсом USB могут быть несовместимы с этим телевизором. x Функция Media Play поддерживает только устройства USB MSC (Mass Storage Class — Класс запоминающих устройств). MSC — это класс запоминающих устройств для хранения данных. Примерами MSC могут служить USB флеш-накопители, устройства чтения флеш- карт и USB жесткие диски (USB концентраторы не поддерживаются). Устройства должны подключаться непосредственно к USB-порту телевизора. x USB жесткие диски не поддерживаются. x Перед подключением устройства к телевизору следует создать резервную копию файлов, чтобы предотвратить из повреждение или потерю данных. Компания SAMSUNG не несет ответственности за любые повреждения файлов или потерю данных. x Не отключайте USB-устройство во время его загрузки. x Чем больше разрешение изображений, тем больше времени требуется для их отображения на экране. x Максимальное поддерживаемое разрешение файлов в формате JPEG — 15360 x 8640 пикселей. x Для неподдерживаемых или поврежденных файлов отображается сообщение «Неподдерживаемый формат файла». x Невозможно воспроизведение файлов MP3 с DRM, которые были загружены с не бесплатных сайтов. DRM (Digital Rights Management — Управление цифровыми правами) — это технология, поддерживающая интегрированное и всесторонне создание, распространение и управление содержимым, включая защиту авторских прав и участие в прибыли поставщиков содержимого, защиту от нелегального копирования содержимого, а также управление выставлением счетов и оплатой. x если подключено более двух устройств PTP, то одновременно можно использовать только одно. x если подключено более двух устройств MSC, то некоторые из них могут не распознаваться. USB-устройства, которые потребляют много энергии (более 500 мА) или требуют высокого напряжения (более 5 В) могут не поддерживаться. x если при подключении или использовании USB-устройства отображается сообщение о превышении допустимого энергопотребления, то устройство может быть не распознано или может функционировать неправильно. Media Play / Видео / Свободно 3,23 ГБ / 3,55 ГБ Cruzer Blade Видео Фотографии Музыка R Возврат • Отображаемое изображение может отличаться в зависимости от модели. Боковая панель телевизора USB-накопительРусский 32 Дополнительные функции x если на телевизоре не нажимались кнопки в течение времени, определенного настройкой Время автозащиты, то включается заставка. x На некоторых внешних жестких дисках при подключении к телевизору может автоматически включаться режим энергосбережения. x если используется удлинительный кабель USB, то USB-устройство может быть не распознано, также могут не читаться файлы устройства. x если подключенное к телевизору USB-устройство не распознано, поврежден список файлов устройства, или файлы из списка не воспроизводятся, подключите USB-устройство к ПК, отформатируйте устройство и проверьте подключение. x Функция Media Play поддерживает файлы jpeg только с последовательным представлением данных. ¦ Отображение на экране Выберите файл, используя кнопки u / d / l / r, затем нажмите кнопку ENTERE. Файл воспроизводится. Экран Media Play может отличаться в зависимости от того, как он был вызван. Режим содержимого. Можно выбрать категорию содержимого. Информация. Отображение информации о выбранном содержимом: категория (например, музыка); устройство (например, USB- накопитель); имя папки/файла и страница. Отображение информации о выбранном файле. На папку вверх Video_02 1 янв 2012 Video_02.AVI 1 янв 2012 17,6 МБ Video_03 1 янв 2012 Video_04 1 янв 2012 Video_05 1 янв 2012 Video_06 1 янв 2012 Video_07 1 янв 2012 Video_08 1 янв 2012 Video_01 1 янв 2012 Media Play / Видео / Cruzer.../Video_02.AVI 2 / 8 �µ Постраничн E Воспр. T Сервис R Возврат Кнопки управления • �Возврат на предыдущую страницу. Доступна только в режиме Музыка. • µПереход на следующую страницу. Доступна только в режиме Музыка. • E Воспр.: Воспроизведение медиафайла. • T Сервис. Отображение меню функций. • RВозврат. Возврат на предыдущий этап. • Отображаемое изображение может отличаться в зависимости от модели.Русский 33 Дополнительные функции Видео Воспроизведение видео 1. Нажимайте кнопки l / r / u / d, чтобы выбрать в списке файлов нужный видеофайл. 2. Нажмите кнопку ENTERE или кнопку ∂ (Воспроизвести). x В верхней части экрана отображается имя файла и время воспроизведения. x если информация о видеофайле недоступна, то время воспроизведения и индикатор прогресса воспроизведения не отображаются. x Во время воспроизведения можно выполнять поиск с помощью кнопок l и r. x Во время воспроизведения можно использовать кнопки π (Назад) и µ (Вперед). ✎ В этом режиме можно просматривать видеоклипы, содержащиеся в игре, но нельзя играть в саму игру. • Отображаемое изображение может отличаться в зависимости от модели. Поддерживаемые форматы субтитров – Внешнее Название расширение Текст с указанием временных меток MPEG-4 .ttxt SAMI .smi SubRip .srt SubViewer .sub Micro DVD .sub или .txt SubStation Alpha .ssa Advanced SubStation Alpha .ass Powerdivx .psb – Внутренние Название Контейнер Xsub AVI SubStation Alpha MKV Advanced SubStation Alpha MKV SubRip MKV Текст с указанием временных меток MPEG-4 MP4Русский 34 Дополнительные функции Поддерживаемые видеоформаты Расширение файла Контейнер Видеокодек Разрешение Частота кадров (кадров/ сек) Скорость потока (Мбит/с) Комментарии Аудиокодек *.avi *.mkv *.asf *.wmv *.mp4 *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.m2ts *.mts *.divx AVI MKV ASF MP4 3GP VRO VOB PS TS DivX 3.11 / 4.x / 5.1 / 6.0 1920 x 1080 30 20 [40] GMC не поддерживается AC3 LPCM ADMPCM(IMA, MS) AAC HE-AAC WMA DD+ MPEG(MP3) DTS Core Vorbis MPEG4 SP / ASP H.264 BP / MP / HP Не включаются FMO / ASO / RS Поддержка BP / MP / HP Level 4.1 H.263 Profile3, только для стандартного разрешения (SD) Motion JPEG 640 x 480 10 Window Media Video v9 1920 x 1080 20 [40] Поддержка VC1 SP / MP /A P L3, L4 не поддерживается Simple Profile Medium Level Main Profile High Level Advanced Profile Level 3 Поддержка WMV9 MPEG2 Hight Profile High Level MPEG1 MPEG-1, кроме D-pictureРусский 35 Дополнительные функции Другие ограничения ✎Примечание. x При возникновении проблем с содержимым кодека этот кодек не будет поддерживаться. x если информация контейнера неверна и файл содержит ошибки, то правильное воспроизведение этого контейнера невозможно. x Воспроизведение звука или видео может оказаться невозможным, если частота потока или частота кадров содержимого превышает максимальную допустимую частоту кадров, указанную в приведенной выше таблице. x если имеются ошибке в таблице индексов, то функция поиска (перехода) не поддерживается. x При воспроизведении видео через сетевое подключение возможно «подергивание» изображения. Название Формат x Поддержка до H.264, Level 4.1 x H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 и AVCHD не поддерживаются. x MPEG4 SP, ASP: – Менее 1280 x 720: максимум 60 кадров – Более 1280 x 720: максимум 30 кадров x GMC 2 не поддерживается. x Поддержка до WMA 7, 8, 9, STD x WMA 9 PRO не поддерживает более 2 аудиоканалов или аудио без потерь. x WMA с частотой дискретизации звука в 22050 Гц в монорежиме не поддерживается. Фотографии Просмотр фотографий (или Слайд-шоу) 1. Нажимайте кнопки u / d / l / r, чтобы выбрать фотографию в списке файлов. 2. Нажмите кнопку ENTERE. – Когда на экране отображается выбранная фотография, нажмите кнопку ENTERE, чтобы включить слайд-шоу. – Во время слайд-шоу все файлы из списка файлов отображаются один за другим. ✎Во время слайд-шоу могут автоматически воспроизводиться музыкальные файлы, если для настройки Фоновая музыка выбрано значение Вкл.. ✎Настройку Фоновая музыка нельзя изменить, пока не завершится загрузка фоновой музыки. • Отображаемое изображение может отличаться в зависимости от модели. 0801181247070.JPG 1 янв 2012 663,0 КБ 1920 x 1080 �µПостраничн E Воспр. T Сервис R Возврат Media Play / Фотографии / Cruzer... / Фотографии / 0801181... .JPG 7 / 1000 На папку вверх Поддерживаемые форматы изображения Расширение файла Формат Разрешение *.jpg JPEG 15360 x 8640 *.bmp BMP 1920 x 1080 *.mpo MPO 15360 x 8640Русский 36 Дополнительные функции Музыка Воспроизведение музыки 1. Нажимайте кнопки u / d, чтобы выбрать музыкальный файл (Музыка) в списке файлов. 2. Нажмите кнопку ENTERE. ✎Отображаются только музыкальные файлы со следующими расширениями. Файлы с другими расширениями не отображаются, даже если они сохранены на том же USB-устройстве. ✎если при воспроизведении MP3-файлы звучат ненормально, измените настройку Эквалайзер в меню Звук. (MP3-файлы с перемодуляцией могут звучать с искажениями.) • Отображаемое изображение может отличаться в зависимости от модели. Media Play / Музыка / Cruzer... / Музыка / Музыка_01.mp3 Музыка_01 Исполнитель 1 Музыка_02 Исполнитель 2 Музыка_01 Исполнитель 1 2003 Fallen Other 2:36 / 5:00 Музыка_03 Исполнитель 3 Музыка_04 Исполнитель 4 Музыка_05 Исполнитель 5 Музыка_06 Исполнитель 6 Музыка_07 Исполнитель 7 Музыка_08 Исполнитель 8 Музыка_09 Исполнитель 9 На папку вверх b{ Постраничн EВоспр. T Сервис R Возврат Воспроизведение выбранной музыки 1. Нажмите кнопку TOOLST и выберите функцию Воспр. выбора. 2. Выберите файлы. ✎ Слева от выбранных файлов отображается символ c. 3. Нажмите кнопку TOOLST и выберите функцию Воспр. выбора. ✎ Можно выбрать или отменить выбор всех музыкальных файлов, нажав Выбрать все / Отменить все. Поддерживаемые форматы музыки Расширение файла Тип Кодек *.mp3 MPEG MPEG1 Audio Layer 3 *.m4a *.mpa *.aac *.3ga MPEG4 AAC *.flac FLAC FLAC *.ogg OGG Vorbis *.wma WMA WMAРусский 37 Дополнительные функции ¦ Media Play — Дополнительные функции Меню настроек воспроизведения видео/фотографий/музыки Нажмите кнопку TOOLST, чтобы выполнить следующие операции. Категория Действия Видео Фотографии Музыка Случайный порядок Можно воспроизводить музыку в случайном порядке. > Режим повтора Можно воспроизводить медиафайлы с повтором. > > Реж. изображения Можно настроить параметры отображения. > > Режим звука Можно настроить параметры звучания. > > > Запустить показ слайдов / Остановка показа Можно запустить или приостановить слайд-шоу. > Скор. слайд-шоу Во время слайд-шоу можно выбрать скорость показа фотографий. > Фоновая музыка Можно включить или отключить фоновую музыку во время слайд-шоу. > Настройка фоновой музыки Можно выбрать фоновую музыку, звучащую во время слайд-шоу. > Увеличенный Можно увеличивать изображения в полноэкранном режиме. > Поворот Можно поворачивать изображения в полноэкранном режиме. > Информация Можно посмотреть подробную информацию о воспроизводимом файле. > > > Воспр. выбора Можно воспроизвести выбранные файлы. > > > Фильм Можно перейти непосредственно другому файлу. > Поиск по времени Используя кнопки l и r, в фильмах можно выполнять поиск по времени с интервалом 1 минута. > Размер картинки Можно настроить размер картинки. > Субтитры Вы можете включить или отключить субтитры Вкл. / Выкл.. > Настройки субтитров Эта возможно лишь в том случае, когда имя файла с субтитрами совпадает с именем видеофайла. > Язык аудио Смотрите видео на поддерживаемом языке по своему выбору. Это возможно только при воспроизведении потокового файла, который поддерживает несколько аудиоформатов. >Русский 38 Другая информация Функция «Телетекст» для аналоговых каналов Страница индексов телетекста содержит информацию об использовании этой услуги. Чтобы информация телетекста отображалась правильно,необходим стабильный уровень сигнала канала. если это условие не выполнено, информация может отсутствовать, а некоторые страницы могут не отображаться. ✎Страницы телетекста можно изменять, нажимая цифровые клавиши на пульте ДУ. 1 / (Телетекст включен/ смешанный/выключен). Включение режима телетекста для текущего канала. Нажмите кнопку два раза для наложения телетекста на текущее изображение. Нажмите ее еще раз для отключение телетекста. 2 8 (сохранить). Сохранение страниц телетекста. 3 6 (индекс). Отображение страницы индекса (содержимого) при просмотре телетекста. 4 4 (размер). Отображение увеличенного в два раза телетекста в верхней половине экрана. Чтобы переместить текст в нижнюю половину экрана, нажмите кнопку еще раз. Для обычного отображения нажмите ее еще раз. 5 9 (удержание). Удержание отображения текущей страницы, если имеется несколько вторичных страниц, которые следуют автоматически. Для отмены нажмите еще раз. 6 Цветные кнопки (красная, зеленая, желтая, синяя). В системе FASTEXT эти кнопки используются вещающими компаниями. Различные разделы телетекста отмечены цветами, и их можно выбрать, нажимая цветные кнопки. Нажмите кнопку, цвет которой соответствует цвету нужного раздела. Отображается новая страница, отмеченная цветом. Элементы можно выбирать таким же способом. Для отображения предыдущей или следующей страницы нажмите соответствующую цветную кнопку. 7 0 (режим). Выбор стандартного режима телетекста (LIST/ FLOF). При нажатии кнопки в режиме LIST осуществляется переключение в режим сохранения списка. В режиме сохранения списка сохранение страниц телетекста в списке осуществляется с помощью кнопки 8(сохранить). 8 1 (дополнительная страница). Отображение доступных дополнительных страниц. 9 2 (пролистывание вперед). Отображение следующей страницы телетекста. 0 3 (пролистывание назад). Отображение предыдущей страницы телетекста. ! 5 (открыть). Отображение скрытого текста (например, ответов на вопросы викторин). Для возврата к обычному тексту отмены нажмите кнопку еще раз. @ 7 (отменить). Уменьшение телетекста, наложенного на текущее изображение. Типовая страница телетекста Часть Содержание A Номер выбранной страницы. B Идентификатор вещательного канала. C Номер текущей страницы или символы поиска. D Дата и время. E Текст. F Информация о состоянии. Информация FASTEXT. 7 8 9 0 ! @ 3 1 4 5 6 2Русский 39 Другая информация Крепление кронштейна для настенного монтажа/настольной подставки Подготовка к установке кронштейна для настенного монтажа/настольной подставки 1. Выключите изделие и отключите кабель питания от настенной розетки. 2. Положите мягкую ткань или подушку на ровную поверхность, чтобы защитить панель, и положите изделие лицевой стороной вниз. 3. Держите основной корпус изделия руками. Потяните подставку в направлении стрелки, чтобы отделить ее. Крепление кронштейна для настенного монтажа/настольной подставки 1 A 2 3 4 [ Осторожно Важно При установке настенного крепежа не используйте шурупы длиннее 14 мм (L14). 4. Приложите кронштейн для настенного монтажа/настольную подставку к монитору/LED-дисплею и надежно закрепите кронштейн для настенного монтажа/настольную подставку, затянув винты. 5. Выровняйте паз на задней панели изделия так, чтобы он был соединен с пазом подставки (настольной подставки, кронштейна для настенного монтажа или другой подставки) и надежно зафиксируйте подставку, затянув винты. A B Комплект для настенного крепления/настольная подставка (не входит в комплект поставки) A Кронштейн для настенного монтажа/настольной подставки BРусский 40 Другая информация ✎Примечание. x При использовании винтов, длина которых превышает указанную в спецификации, возможно повреждение внутренних частей изделия. x У кронштейнов для настенного монтажа, которые не совместимы со стандартной спецификацией VESA, длина винтов может отличаться в зависимости от соответствующих спецификаций. x Не используйте винты, которые несовместимы со стандартной спецификацией VESA, и не завинчивайте винты с чрезмерной силой. Это может стать причиной повреждения изделия и травм в результате падения изделия. Компания Samsung не несет ответственности за любые повреждения или травмы. x Компания Samsung не несет ответственности за любое повреждение изделия или травмы, причиной которых стало использование кронштейнов для настенного монтажа/настольных подставок, которые не совместимы со спецификацией, или выполнение установки лицами, не имеющими соответствующих полномочий. x Для настенного монтажа изделия приобретайте кронштейн для настенного монтажа, который обеспечивает расстояние до стены не менее 10 см. x Используйте кронштейн для настенного монтажа в соответствии с международными спецификациями. Замок «кенсингтон» для защиты от кражи Замок «кенсингтон» не поставляется компанией Samsung. Это устройство, используемое для физического крепления системы при использовании в общедоступном месте. Внешний вид и метод запирания могут отличаться от изображенных на иллюстрации в зависимости от изготовителя замка. Дополнительная информация о правильном использовании замка приведена в инструкции по эксплуатации замка «кенсингтон». ✎Найдите символ «K» на задней стороне LED-дисплея. Разъем «кенсингтон» находится рядом с символом «K». Для запирания изделия выполните следующие действия. 1. Оберните кабель замка «кенсингтон» вокруг большого неподвижного объекта, например, стола или стула. 2. Протяните конец кабеля с замком через петлю на конце кабеля замка «кенсингтон». 3. Вставьте запирающее устройство в разъем «кенсингтон» на изделии (1). 4. Заприте замок. 1 <Дополнительно> <Задняя сторона LED-дисплея> ✎Это общая инструкция. Подробная инструкция содержится в руководстве пользователя, прилагаемом к запирающему устройству. ✎Запирающее устройство следует приобретать отдельно. ✎Местоположение разъема «кенсингтон» может различаться в зависимости от модели LED-дисплея.Русский 41 Другая информация Устранение неполадок если у вас возникнут вопросы, связанные с использованием LED-дисплея, сначала изучите этот раздел. если ни один из советов по устранению неполадок не поможет, посетите веб-сайт www.samsung.com и выберите раздел «Поддержка» или позвоните в один из центров поддержки, указанных на последней странице обложки этого руководства. Проблемы Способы решения и разъяснения Качество изображения Сначала выполните Тест изображения и убедитесь в том, что LED-дисплей правильно отображает тестовое изображение. (Вызовите MENU - Поддержка - Самодиагностика - Тест изображения.) если тестовое изображение отображается правильно, плохое изображение может быть обусловлено источником сигнала. Изображение на экране LED-дисплея не выглядит так же хорошо, как в магазине. • если вы используете аналоговое кабельное телевидение/приставку, закажите приставку цифрового телевидения. Используйте кабель HDMI для подключения источника сигнала высокой четкости. • Пользователи кабельного/спутникового телевидения: попробуйте прием каналов высокой четкости. • Антенное подключение: попробуйте прием каналов высокой четкости после автонастройки. ✎ Многие каналы высокой четкости передают материалы, полученные масштабированием содержимого стандартной четкости. • Выберите разрешение выходного сигнала кабельной/спутниковой приставки, равное 1080i или 720p. • Убедитесь в том, что смотрите на экран LED-дисплея с минимального рекомендованного расстояния, основанного на размере и четкости передаваемого изображения. Искажения изображения: ошибка микроблоков, маленькие блоки, точки, пикселизация. • Сжатие видео может стать причиной искажений изображения, в особенности, быстро изменяющегося изображения, например спорта или кинобоевиков. • Низкий уровень сигнала или плохое качество сигнала могут стать причиной искажения изображения. Эта проблема не связана с LED-дисплеем. • Использование мобильных телефонов на близком расстоянии от LED-дисплея (ок. 1 метра) может стать причиной появления шума на изображении аналоговых и цифровых LED-дисплеев. Плохая цветопередача или яркость. • Настройте параметры изображения в меню LED-дисплея. (Выберите Реж. изображения/Цвет/Яркость/Четкость) • Настройте параметр Экон. энергии в меню LED-дисплея. (Выберите MENU — Система — Экономный режим — Экон. энергии) • Попробуйте восстановить стандартные настройки изображения. (Выберите MENU — Изображение — Сброс изображения) На краю экрана отображается пунктирная линия. • если выбран размер изображения По разм. экрана, то измените его на 16:9. • Измените разрешение приставки кабельного/спутникового телевидения. При смене канала изображение останавливается или искажается или задерживается. • При подключении к приставке кабельного телевидения попробуйте перезапустить приставку. Снова подключите кабель питания и подождите, пока приставка кабельного телевидения загрузится. Для этого может потребоваться до 20 минут. • Выберите разрешение выходного сигнала приставки кабельного телевидения равное 1080i или 720p. Качество звука Сначала выполните Звуковой тест и убедитесь в том, что LED-дисплей правильно воспроизводит звук. (Выберите MENU - Поддержка - Самодиагностика - Звуковой тест) если изделие правильно воспроизводит звук (ОК), то проблема может быть обусловлена источником сигнала. Нет звука или слишком тихий звук при максимальной громкости. • Проверьте уровень громкости устройства, подключенного к LED-дисплею (приставка кабельного/спутникового телевидения, DVD, Blu-ray и т. д.). Хорошее качество изображения, но нет звука. • При использовании кабеля DVI-HDMI, LED-дисплей не поддерживает аудио. • Перезагрузите подключенное устройство, отключив и снова подключив кабель питания устройства. • если в LED-дисплея есть разъем для подключения наушников, убедитесь в том, что к этому разъему ничего не подключено. Громкоговорители издают неприятный звук. • При подключении к антенне или кабелю проверьте уровень сигнала. Низкий уровень сигнала может быть причиной искажения звука. Не изображения, нет видео LED-дисплей не включается. • Убедитесь в том, что кабель питания надежно подключен к настенной розетке и LED-дисплею. • Убедитесь в том, что настенная розетка исправна. • Нажмите кнопку питания (POWER) LED-дисплея, чтобы убедиться в том, что проблема не с пультом ДУ. если LED-дисплей включится, см. раздел «Не работает дистанционное управление». LED-дисплей автоматически выключается. • Убедитесь в том, что в меню Время для функции Таймер сна выбрана настройка Выкл.. • если к LED-дисплею подключен ПК, проверьте параметры питания ПК. • Убедитесь в том, что кабель питания надежно подключен к настенной розетке и LED-дисплею. • При просмотре на LED-дисплее эфирных или кабельных каналов LED-дисплей автоматически отключается через 10–15 минут, если нет сигнала.Русский 42 Другая информация Проблемы Способы решения и разъяснения Нет изображения/видео. • Проверьте кабельные подключения (отключите и снова подключите все кабели, подключенные к LED-дисплею и внешним устройствам). • Проверьте, соответствуют ли выходы видеосигнала внешних устройств (приставка кабельного/спутникового телевидения, DVD, Blu-ray и т. д.) входам LED-дисплея. Например, если у внешнего устройства есть выход HDMI, то его следует подключить к входу HDMI LED-дисплея. • Убедитесь в том, что подключенные устройства включены. • Убедитесь в том, что в LED-дисплее выбран правильный источник сигнала, нажав кнопку SOURCE на пульте ДУ LED-дисплея. • Перезагрузите подключенное устройство, отключив и снова подключив кабель питания устройства. Радиочастотное подключение (кабель/антенна) LED-дисплей не принимает каналы. • Убедитесь в том, что кабель антенны надежно подключен. • Запустите функцию Настройка (первоначальная настройка), чтобы добавить доступные каналы в список каналов. Выберите MENU — Система - Настройка (первоначальная настройка) и подождите, пока не будут сохранены все каналы. • Проверьте, правильно ли направлена антенна. Искажения изображения: ошибка микроблоков, маленькие блоки, точки, пикселизация. • Сжатие видео может стать причиной искажений изображения, в особенности, быстро изменяющегося изображения, например спорта или кинобоевиков. • Низкий уровень сигнала может стать причиной искажения изображения. Эта проблема не связана с LED-дисплеем. Другое Изображение не отображается во весь экран. • На каналах высокой четкости есть полосы с обеих сторон экрана при отображении масштабированного содержимого стандартной четкости (4:3). • Черные полосы сверху и снизу отображаются при воспроизведении фильмов, соотношение сторон которых отличается от соотношения сторон LED-дисплея. • Измените размер изображения на внешнем устройстве или LED-дисплее для вывода изображения во весь экран. Не работает дистанционное управление. • Замените батарейки пульта ДУ, соблюдая полярность (+/–). • Протрите окно инфракрасного передатчика на пульте ДУ. • Направьте пульт ДУ прямо на LED-дисплей с расстояния 1,5–2 метра. Пульт ДУ приставки кабельного/ спутникового телевидения не включает или не выключает LED-дисплей или не регулирует громкость. • Запрограммируйте пульт приставки кабельного/спутникового телевидения для работы с LED-дисплеем. Коды LED-дисплея SAMSUNG указаны в инструкции по эксплуатации приставки кабельного/спутникового телевидения. Отображается сообщение «Режим не поддерживается». • Проверьте поддерживаемое разрешение LED-дисплея и соответственно измените выходное разрешение внешнего устройства. LED-дисплей пахнет пластмассой. • Этот нормальный запах, со временем он исчезнет. Функция Информ. о сигнале в меню тестов Самодиагностика LED-дисплея недоступна. • Эта функция доступна только для цифровых каналов, принимаемых по антенному/радиочастотному/коаксиальному входу. LED-дисплей наклонился вправо или влево. • Снимите подставку с LED-дисплея и прикрепите ее снова. Не удается прикрепить подставку. • Убедитесь в том, что LED-дисплей размещен на ровной поверхности. если вам не удается вынуть винты из LED-дисплея, используйте намагниченную отвертку. Меню Канал выделено серым цветом (недоступно). • Меню Канал доступно только при выборе источника телевизионного сигнала. Настройки теряются каждые 30 минут или при каждом выключении LED-дисплея. • если LED-дисплей работает в режиме Демонстрация, то настройки звука и изображения сбрасываются каждые 30 минут. Смените режим с Демонстрация (Демонстрация) на Домашний (Домашний режим), запустив функцию Настройка (первоначальная настройка). Нажмите кнопку SOURCE для выбора режима «ТВ», затем нажмите MENU → Система → Настройка (первоначальная настройка) → ENTERE. Прерывистые потери звука или изображения. • Проверьте кабельные подключения и переподключите их. • Потеря звука или видео может быть обусловлена использованием слишком жестких или слишком толстых кабелей. Убедитесь в том, что кабели достаточно гибкие для долговременного использования. При монтаже LED-дисплея на стене рекомендуется использовать кабели с согнутыми под углом 90 градусов разъемами. если смотреть на кромку рамки LED-дисплея с близкого расстояния, видны маленькие частицы. • Это часть дизайна изделия. Не является дефектом.Русский 43 Другая информация Проблемы Способы решения и разъяснения Недоступно меню PIP. • Функция PIP доступна только при использовании источника сигнала HDMI, Компонент и ПК. LED-был выключен 45 минут назад, однако он снова включился. • Это нормальное явление. LED-дисплей использует фикцию беспроводной (OTA) загрузки обновления ПО, пока вы смотрите телевизор. Появляется сообщение «Недопустимый сигнал» или «Слабый сигнал / Нет сигнала». • При использовании модуля CAM CARD (CI/CI+) убедитесь в том, что он остановлен в разъем общего интерфейса. • если проблема сохранится, выньте модуль CAM CARD из LED-дисплея и установите его в разъем снова. Периодические проблемы с изображением/ звуком. • Проверьте и измените источник сигнала. Резиновые ножки подставки могут оставлять следы на поверхности мебели. • Чтобы предотвратить это, используйте войлочные прокладки в тех местах, где LED-дисплей касается мебели. ✎В этом изделии используется панель, состоящая из субпикселей, изготовляемых с применением сложных технологий. Несмотря на это на экране может быть несколько ярких или темных пикселей. Эти пиксели не влияют на потребительские свойства изделия. ¦ Хранение и обслуживание ✎если на экран LED-дисплея были наклеены наклейки, то после их удаления остаются следы. Удалите их, чтобы смотреть LED-дисплей. ✎Внешние панели и экран изделия можно поцарапать во время чистки. Осторожно протирайте внешние панели и экран, используя прилагаемую салфетку или мягкую ткань. Не разбрызгивайте воду или чистящее средство непосредственно на изделие. Попадание любой жидкости в изделие может стать причиной неисправности, пожара или поражения электрическим током. Протирайте изделие мягкой тканью, слегка смоченной в воде. [ОСТОРОЖНО если высота « A» с одной стороны отличается от этой высоты с другой стороны, отрегулируйте высоту.Русский 44 Другая информация ¦ Лицензия TheaterSound HD, SRS and the symbol are trademarks of SRS Labs, Inc. TheaterSound HD technology is incorporated under licence from SRS Labs, Inc. Изготовлено по лицензии Dolby Laboratories. Dolby и символ двойное «D» являются торговыми марками Dolby Laboratories. 2.0 Channel Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. (Доступно только в изделиях серии TB300.) Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product Includes software. © DTS, Inc. All Rights Reserved. (Доступно только в изделиях серии TB350.) Уведомление о лицензии на ПО с открытым исходным кодом В случае использования ПО с открытым исходным кодом, лицензия на ПО с открытым исходным кодом доступна в меню изделия. Уведомление о лицензии на ПО с открытым исходным кодом написано только на английском языке. ¦ Директива по утилизации электрического и электронного оборудования Надлежащая утилизация этого изделия (Директива по утилизации электрического и электронного оборудования) (Применяется в странах ЕС и других европейских странах с системами раздельного сбора отходов) Этот символ на изделии, принадлежностях или документации означает, что изделие и его электронные принадлежности (например, зарядное устройство, гарнитура, USB-кабель) не должны утилизироваться с другим бытовым мусором после окончания их срока службы. Для предотвращения причинения ущерба окружающей среде и здоровью людей в результате неконтролируемой утилизации отходов отделяйте эти устройства от других типов отходов и утилизируйте их с должной ответственностью, чтобы способствовать устойчивому повторному использованию материальных ресурсов. Бытовые потребители должны обратиться к розничному продавцу, у которого они приобрели изделие или в органы местной власти, чтобы получить подробную информацию о том, как и где они могут сдать эти устройства для безопасной для окружающей среды утилизации. промышленные потребители должны обратиться к своим поставщикам и проверить условия контракта на покупку. Это изделие и его электронные принадлежности не должны при утилизации смешиваться с другими отходами. Надлежащая утилизация батареек этого изделия (Применяется в странах ЕС и других европейских странах с отдельными системами возврата батарей.) Этот символ на батарее, в руководстве или на упаковке означает, что используемые в этом изделии батареи не должны утилизироваться с другим бытовым мусором после окончания их срока службы. Нанесенные на батареи символы Hg, Cd или Pb означают, что батареи содержат ртуть, медь или свинец в количествах, превышающих нормы, определенные директивой еС 2006/66. если батареи не утилизируются должным образом, эти вещества могут причинить ущерб здоровью людей и окружающей среде. Для защиты природных ресурсов и способствования повторному использованию материальных ресурсов батареи следует отделять от других типов отходов и утилизировать через бесплатную местную систему возврата батарей.Русский 45 Другая информация жК-монитор со встроенным ТВ-тюнером - устройство для визуального отображения текстовой и графической информации, в том числе программ телевизионного вещания. Технические характеристики Условия окружающей среды Эксплуатация Температура: 10°C ~ 40°C (50°F ~ 104°F) Влажность: 10–80 %, без конденсации Хранение Температура: -20°C ~ 45°C (-4°F ~ 113°F) Влажность: 5–95 %, без конденсации Наклон -1°(±2°) ~ 20°(±2°) Телевизионная система Аналоговое телевидение: B/G, D/K, L, I (зависит от выбранной страны) Цифровое телевидение: DVB-T/DVB-C Система цвета/видео Аналоговое телевидение: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60 Цифровое телевидение: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0 Система звука BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC Вход HDMI Видео: 1080p 24 Гц, 1080p, 1080i, 720p, 576p, 480p Звук: 2-канальный линейный PCM 32/44,1/48 кГц, 16/20/24 бита. Номер сертификата РОСС KR.AB57.B00056 Срок действия сертификата с 13.01.2011 по 12.01.2014 Орган сертификации OOO "АЛЬТТеСТ" 117418, Москва, ул. Цюрупы, д.14 IP (степень защиты от попадания твердых частиц и влаги) IP 20 Класс защиты прибора от поражения электрическим током оборудование класса II Напряжение питания переменного тока Переменный ток: 100-240 В Название модели T19B300 T22B300 T24B300 T27B300 Размер экрана (по диагонали) 18,5 дюйма(47 см) 21,5 дюйма (55 см) 23,6 дюйма (60 см) 27 дюймов (69 см) Разрешение дисплея 1366 x 768 при 60 Гц 1920 x 1080 при 60 Гц Звук (выход) 5 Вт x 2 Размеры (ШxГxВ) (Без подставки) 444,7 x 48,5 x 278,2 мм 509,7 x 47 x 318,2 мм 569,2 x 49 x 349,4 мм 643,3 x 49 x 397,9 мм (С подставкой) 444,7 x 187 x 356,4 мм 509,7 x 195 x 396,6 мм 569,2 x 195 x 428 мм 643,3 x 252 x 476,5 мм Масса (Без подставки) 2,95 кг 3,7 кг 4,25 кг 5,1 кг (С подставкой) 3,2 кг 3,95 кг 4,5 кг 5,6 кг Название модели T22B350 T23B350 T24B350 Размер экрана (по диагонали) 21,5 дюйма (55 см) 23 дюйма (58 см) 24 дюйма (61 см) Разрешение дисплея 1920 x 1080 при 60 Гц Звук (выход) 5 Вт x 2 Размеры (ШxГxВ) (Без подставки) 509,7 x 47 x 318,2 547,5 x 49 x 337,9 мм 569,2 x 49 x 349,4 мм (С подставкой) 509,7 x 195 x 396,6 мм 547,5 x 195 x 416,1 мм 569,2 x 195 x 428 мм Масса (Без подставки) 3,7 кг 3,25 кг 4,15 кг (С подставкой) 3,95 кг 3,5 кг 4,45 кг ✎Примечание. x Внешний вид и технические характеристики могут изменяться без уведомления. x Информация об электропитании и потреблении энергии указана на этикетке изделия. x Некоторые модели могут быть недоступны в некоторых регионах. x если выключателя питания нет, то нулевого энергопотребления можно добиться, только отключив кабель питания. x Функция управления питанием дисплея (DPM) не работает при использовании порта HDMI IN (DVI) этого изделия.Обращение в Samsung во всем мире Если у вас возникнут вопросы или комментарии, относящиеся к продукции Samsung, обратитесь в центр поддержки SAMSUNG. Страна Центр поддержки Веб-сайт RUSSIA 8-800-555-55-55 http://www.samsung.com GEORGIA 8-800-555-555 http://www.samsung.com ARMENIA 0-800-05-555 http://www.samsung.com AZERBAIJAN 088-55-55-555 http://www.samsung.com KAZAKHSTAN 8-10-800-500-55-500(GSM: 7799) http://www.samsung.com ТОО "Самсунг Электроникс КЗ Энд Централ Эйжа" 050000, Республика Казахстан, город Алматы, улица Наурызбай батыра, 31, 6-7 этаж UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.com KYRGYZSTAN 00-800-500-55-500 http://www.samsung.com TADJIKISTAN 8-10-800-500-55-500 http://www.samsung.com MONGOLIA - http://www.samsung.com UKRAINE 0-800-502-000 http://www.samsung.com/ua http://www.samsung.com/ua_ru BELARUS 810-800-500-55-500 http://www.samsung.com MOLDOVA 00-800-500-55-500 http://www.samsung.com Производитель: ООО «Самсунг Электроникс Рус Калуга», 249002, Калужская обл., Боровский р-н, д. Коряково, Первый Северный проезд, владение 1 © Samsung Electronics Co., Ltd., 2012. Все права защищены BN46-00196T-02 Samsung Universal Print Driver User’s Guide imagine the possibilitiesCopyright_ 2 Copyright © 2009 Samsung Electronics Co., Ltd. All rights reserved. This admin guide is provided for information purposes only. All information included herein is subject to change without any notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide. • Samsung Universal Print Driver is a trademark of Samsung Electronics Co., Ltd • Samsung and Samsung logo are trademarks of Samsung Electronics Co., Ltd. • Microsoft, Windows, Internet Explorer and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. • All other brand, product and company names herein may be the trademarks of their respective owners. REV. 1.00Contents_ 3 Contents COPYRIGHT/2 CONTENTS/3 INTRODUCTION Samsung Universal Print Driver vs. Model specific drivers . . . . . . . . . . . . . . . . 4 System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 INSTALLING AND UNINSTALLING THE SAMSUNG UNIVERSAL PRINT DRIVER Installing Samsung Universal Print Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Uninstalling Samsung Universal Print Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 USING THE SAMSUNG UNIVERSAL PRINT DRIVER Accessing the Samsung Universal Print Driver . . . . . . . . . . . . . . . . . . . . . . . . . 7 Layout overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Changing Samsung Universal Print Driver settings . . . . . . . . . . . . . . . . . . . . . . 9 Setting the pop-up option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Setting the printer search option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Searching print devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 By TCP/IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 By Search Now menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Creating a favorite folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Printing with Samsung Universal Print Driver . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Basic printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Changing the selected printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 INDEX/14Introduction_ 4 1.Introduction The Samsung Universal Print Driver is a single driver that can be used with different printer models. This gives users instant access to not only Samsung print devices but also a range of other vendor's PDL based devices without the need to download separate drivers. • PDL means both PCL and PS. • Samsung does not guarantee the quality of other vendors’ printer devices and Samsung models that are not supported (Click to see the supported Samsung device list). For unsupported Samsung models, driver is automatically set to usable default PDL. Samsung Universal Print Driver vs. Model specific drivers The following table shows the differences between the Samsung Universal Print Driver and the product based drivers: System requirements Minimum system requirements for the Samsung Universal Print Driver are as follows: SAMSUNG UNIVERSAL PRINT DRIVER MODEL SPECIFIC DRIVERS User interface Consistent user interface. Inconsistent user interface. Installation • Download and install with the installer file provided with the Samsung Universal Print Driver. • Install via executing the installer file. • Manually locate, download, and install driver for each device. • Install via CD autorun or Add printer wizard. Device discovery Easily locate and access suggested devices from the whole Samsung printer products. Manually discover devices. Availability Available on the Samsung web site. Available on the CD provided with the device, or the product based driver. OPERATING SYSTEM REQUIREMENTS CPU RAM FREE HDD SPACE Windows Vista 1 GHz 1 GB 40 GB Windows XP 300 MHz or higher 128 MB RAM or higher 1.5 GB or higher (additional 1.8 GB in SP2 and additional 900 MB in SP3 Windows 2000 133 Mhz 64 MB 2GB Windows Server 2003 550 MHz or higher 256 MB RAM or higher 2.9 GB or higher Windows Server 2008 2 GHz or faster 2 GB RAM or higher 40 GB or higherInstalling and Uninstalling the Samsung Universal Print Driver_ 5 2.Installing and Uninstalling the Samsung Universal Print Driver This chapter gives you step-by-step instructions for installing and uninstalling the Samsung Universal Print Driver. The following windows are for a PCL driver in Windows XP. Windows may differ for a PS driver, but the steps are the same. Installing Samsung Universal Print Driver Before installing the driver, check the recommended minimum requirements for your system (See "System requirements" on page 4). 1. Start a web browser and go to www.samsung.com. 2. Search for the Samsung Universal Print Driver setup file. 3. Start the setup file. The Samsung Universal Print Driver Installer Wizard opens. 4. Click Next. If necessary, select a language from the drop-down list. After the installation window opens, wait for installation to be completed. 5. After the Setup Completed window opens, click Finish. If you want to register yourself as a user of Samsung devices in order to receive information from Samsung, select the Installing and Uninstalling the Samsung Universal Print Driver_ 6 checkbox and click Finish. If the driver is installed properly, you can find the Samsung Universal Print Driver in the Printers and Faxes folder. Uninstalling Samsung Universal Print Driver If you want to uninstall the Samsung Universal Print Driver, follow the steps below: 1. From the Windows Start menu, select > All Programs > Samsung Universal Print Driver > Maintenance. The Samsung Universal Print Driver Installer Wizard opens. 2. Select Remove and click Next. 3. Select the components you want to remove and click Next. 4. A confirmation window appears, click Yes. 5. When unistallation is completed, click Finish. Using the Samsung Universal Print Driver_ 7 3.Using the Samsung Universal Print Driver The main purpose of the Samsung Universal Print Driver is to install one driver (Samsung Universal Print Driver) and use it with different print devices. However, the Samsung Universal Print Driver has other features like searching print devices, creating a favorites folder, and checking a device’s status. Accessing the Samsung Universal Print Driver 1. From the Windows Start menu, select Printers and Faxes. 2. Right-click Samsung Universal Print Driver. 3. Click Printing Preferences or Properties. Samsung Universal Print Driver window opens. If there’s no recently used printer, a pop-up window asking you to search printers appears. Click OK to search connected printers. Using the Samsung Universal Print Driver_ 8 Layout overview 1 Layout bar Includes displaying options. • : Selects the layout for the Samsung Universal Print Driver window. If you choose Layout2 and installed the Samsung Smart Panel program, you can see the status window(number 4). • : Refreshes all the printer information in the list. • : Selects the view type for the printer list. Detail View shows printer information such as Address, Location, Status and System name. Image View also shows printer information except with a larger printer image. This option is only supported on Windows XP(and later). • : Displays the printer list in groups. This option is only supported on Windows XP(and later). • : Searches for a printer in the list by a keyword like a model name. • : Opens the help window. • : Shows information about the Samsung Universal Print Driver.Using the Samsung Universal Print Driver_ 9 Changing Samsung Universal Print Driver settings Setting the pop-up option You can set the Samsung Universal Print Driver window to appear when you print. There are four options for this window to pop-up: 1. Click the Settings button on the bottom left corner. 2 Main menus • Recent - Recently Used Printers : Shows the list of recently used printers. The most recently used printer is at the top of the list. - Recently Searched Printers : Shows the list of recently found printers. The most recently found printer is at the top of the list. • Search - Search Now : Searches printers that are connected either by USB or network. - Search by Address : Searches for a printer by the printer’s IP address. • My Printer - Create a Favorite Folder : Creates a folder for favorite printers. • Settings : Displays options for pop-ups and searches. 3 Printer list Shows printer list. 4 Status window Shows status of the selected printer in the list. You need to select Layout2 and install the Samsung Smart Panel program to see this window. • Update Now : Updates the selected printer’s information. • Buy Supplies : Opens the website for buying supplies. • TroubleShooting Guide : Opens the troubleshooting chapter of the user’s guide. You need to install the Smart Panel of the model you are using to see the troubleshooting guide. • Printer Settings : Opens SyncThur Web Service, which provides options for configuring and managing your printer. You can only use this option with network printers. Using the Samsung Universal Print Driver_ 10 2. Click the Pop-up tab. A sample of Pop-up tab is shown in the following figure. • When driver UI appears: The Samsung Universal Print Driver window appears when you open a Printing Preferences (Properties) window. • Every time you print: The Samsung Universal Print Driver window appears every time you print. • Only the first time you print: The Samsung Universal Print Driver window appears only for the first time when Samsung Universal Print Driver is selected as the printer from an application. • Only when the last printer used is not available: The Samsung Universal Print Driver window appears only if the printer that was last used is not available. 3. Click OK. Setting the printer search option To set the search options for the Samsung Universal Print Driver, follow the steps below: 1. Click the Settings button on the bottom left corner. Using the Samsung Universal Print Driver_ 11 2. Click the Search tab and select one of the following options. • Search only supported printer: Searches only supported printers connected. Click to see the supported Samsung device list • Search all the printers: Searches all connected printers. 3. Click OK. Searching print devices By TCP/IP address If you know the TCP/IP address of the print device you want to use, you can search the device by typing the TCP/IP address. Follow the steps below: 1. From the Windows Start menu, select Printers and Faxes. 2. Right-click Samsung Universal Print Driver. 3. Click Printing Preferences or Properties. The Samsung Universal Print Driver window opens. 4. Click Search by Address. A window appears. 5. Type in the TCP/IP address of your printer and click OK. By Search Now menu If you don’t know the TCP/IP address of the print device you want to use, you can use the Search Now option to search for the device. Follow the steps below: 1. From the Windows Start menu, select Printers and Faxes. 2. Right-click Samsung Universal Print Driver. 3. Click Printing Preferences or Properties. Samsung Universal Print Driver window opens. 4. Click Search Now. Samsung Universal Print Driver searches the connected print devices. The search result might differ depending on the search option you have selected (See "Setting the printer search option" on page 10.) Creating a favorite folder You can create a folder with the printers you use the most for your convenience. For example, if you travel between home and work sites, you can create two different printer folders; Home and Work, and manage the printers as needed. To create a favorite folder, follow the steps below: Using the Samsung Universal Print Driver_ 12 1. Click Create a Favorite Folder. Add new favorite folder window appears. 2. Type in a folder name. 3. Click OK. A new folder is added under My Printer. To add printers to a folder under My Printer, you can drag-and-drop the print from the list to the folder or right-click the printer in the list and select Move or Copy. Using the Samsung Universal Print Driver_ 13 Help Click the Help button ( )in the upper right of the Samsung Universal Print Driver window. A help window appears. Use this help to answer your questions about using the Samsung Universal Print Driver. Printing with Samsung Universal Print Driver Basic printing To print a document using Samsung Universal Print Driver, follow the steps below: The following steps show printing from Notepad. Menu names might differ depending on the application you are using. 1. Open the file that you want to print in an application. 2. From the menu bar select File > Print. 3. Select the Samsung Universal Print Driver from the printer list. 4. Click OK. Printing begins. Or, depending on the pop-up option (see "Setting the pop-up option" on page9) you selected, the Samsung Universal Print Driver window might appear before printing. Choose the printer you want to use and print. Changing the selected printer 1. From the Windows Start menu, select Printers and Faxes. 2. Right-click Samsung Universal Print Driver. 3. Click Printing Preferences or Properties. Printing Preferences (Properties) window opens. 4. Select another printer either from the printer list or by searching (See "Searching print devices" on page 11). 5. Click OK. All subsequent printing will now be directed to the new printer.Index_ 14 Index A accessing 7 C copyright 2 D difference 4 F folder 11 I installing 5 introduction 4 L layout 8 P printing 13 S search search button 11 TCP/IP 11 setting 9 pop-up window 9 search option 10 system requirements 4 U uninstalling 6 using 7 Samsung Universal Print Driver Mode d’emploi imaginez les possibilitésCopyright_ 2 Copyright © 2009 Samsung Electronics Co., Ltd. Tous droits réservés. Le présent guide administrateur n’est fourni qu’à titre informatif. Toutes les informations communiquées ci-après sont susceptibles d’être modifiées sans préavis. Samsung Electronics ne saurait être tenu pour responsable des dommages, directs ou indirects, consécutifs à l’utilisation de ce guide. • Samsung Universal Print Driver est une marque commerciale de Samsung Electronics Co., Ltd. • Samsung et le logo Samsung sont des marques commerciales de Samsung Electronics Co., Ltd. • Microsoft, Windows, Internet Explorer et Windows Vista sont des marques déposées ou des marques commerciales de Microsoft Corporation aux Etats-Unis et/ou dans d’autres pays. • L’ensemble des autres marques, produits et noms d’entreprises peuvent être la propriété de leurs propriétaires respectifs. REV. 1.00Table des matières_ 3 Table des matières COPYRIGHT/2 TABLE DES MATIÈRES/3 INTRODUCTION Samsung Universal Print Driver contre pilotes spécifiques à un modèle . . . . . 4 Configuration requise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 INSTALLATION ET DÉSINSTALLATION DU PILOTE D’IMPRESSION UNIVERSEL SAMSUNG UNIVERSAL PRINT DRIVER Installation du pilote d’impression universel Samsung Universal Print Driver 5 Désinstallation du pilote d’impression universel Samsung Universal Print Driver 6 UTILISATION DU PILOTE D’IMPRESSION UNIVERSEL SAMSUNG UNIVERSAL PRINT DRIVER Accès au pilote d’impression universel Samsung Universal Print Driver . . . . 7 Aperçu de la mise en page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Modification des paramètres du pilote d’impression universel Samsung Universal Print Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Configuration de l’option de fenêtre indépendante . . . . . . . . . . . . . . . . . . . . . . 10 Configuration de l’option de recherche de l’imprimante . . . . . . . . . . . . . . . . . . . 11 Recherche des périphériques d’impression . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Par adresse TCP/IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Par le menu Rechercher maintenant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Création d’un dossier de favoris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Aide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Impression à l’aide du pilote d’impression universel Samsung Universal Print Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Impression de base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Changement de l’imprimante sélectionnée . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 INDEX/15Introduction_ 4 1.Introduction Le pilote d’impression universel Samsung Universal Print Driver est un pilote unique pouvant être utilisé avec différents modèles d’imprimantes. Cela permet aux utilisateurs d’accéder directement non seulement aux périphériques d’impression Samsung, mais également à une gamme de périphériques d’autres fournisseurs sans avoir à télécharger de pilotes séparés. • PDL signifie PCL et PS. • Samsung ne garantit pas la qualité des périphériques d’impression d’autres fournisseurs et des modèles Samsung non pris en charge (Cliquez sur pour consulter la liste des périphériques Samsung pris en charge). Pour les modèles Samsung non pris en charge, le pilote est automatiquement défini sur PDL par défaut utilisable. Samsung Universal Print Driver contre pilotes spécifiques à un modèle Le tableau suivant montre les différences entre le pilote d’impression universel Samsung Universal Print Driver et les pilotes de produits spécifiques : Configuration requise La configuration minimale requise pour le pilote d’impression universel Samsung Universal Print Driver est la suivante : SAMSUNG UNIVERSAL PRINT DRIVER PILOTES SPÉCIFIQUES À UN MODÈLE Interface utilisateur Interface utilisateur cohérente. Interface utilisateur incohérente. Installation • Téléchargez et installez le ficher d’installation fourni avec le pilote d’impression universel Samsung Universal Print Driver. • Installez en exécutant le fichier d’installation. • Localisez, téléchargez et installez manuellement le pilote pour chaque périphérique. • Installez via l’exécution automatique du CD ou via l’assistant Installation d’imprimante. Découverte de périphériques Localisez facilement et accédez aux périphériques suggérés parmi l’ensemble des produits d’impression Samsung. Découvrez manuellement les périphériques. Disponibilité Disponible sur le site Web Samsung. Disponible sur le CD fourni avec le produit, ou avec le pilote spécifique du produit. SYSTÈME D’EXPLOITATION CONFIGURATION REQUISE PROCESSEUR RAM ESPACE LIBRE SUR LE DISQUE DUR Windows Vista 1 GHz 1 Go 40 Go Windows XP 300 MHz ou supérieur 128 Mo de RAM ou supérieur 1,5 Go ou supérieur (1,8 Go supplémentaires pour SP2 et 900 Mo pour SP3 Windows 2000 133 Mhz 64 Mo 2 Go Windows Server 2003 550 MHz ou supérieur 256 Mo de RAM ou supérieur 2,9 Go ou supérieur Windows Server 2008 2 GHz ou plus rapide 2 Go de RAM ou supérieur 40 Go ou supérieurInstallation et désinstallation du pilote d’impression universel Samsung Universal Print Driver_ 5 2.Installation et désinstallation du pilote d’impression universel Samsung Universal Print Driver Ce chapitre vous guide pas à pas dans la procédure d’installation et de désinstallation du pilote d’impression universel Samsung Universal Print Driver. Les fenêtres suivantes s’appliquent à un pilote PCL dans Windows XP. Les fenêtres peuvent varier pour un pilote PS, mais les étapes sont les mêmes. Installation du pilote d’impression universel Samsung Universal Print Driver Avant d’installer le pilote, vérifiez la configuration minimale requise pour votre système (Voir « Configuration requise » à la page 4). 1. Ouvrez un navigateur Web et visitez www.samsung.com. 2. Recherchez le fichier d’installation du pilote d’impression universel Samsung Universal Print Driver. 3. Lancez le fichier d’installation. L’assistant d’installation du pilote d’impression universel Samsung Universal Print Driver s’ouvre. 4. Cliquez sur Suivant. Au besoin, sélectionnez une langue dans la liste déroulante. Une fois la fenêtre d’installation ouverte, attendez que l’installation se termine.Installation et désinstallation du pilote d’impression universel Samsung Universal Print Driver_ 6 5. Quand la fenêtre Installation terminée s’ouvre, cliquez sur Terminer. Pour vous inscrire en tant qu’utilisateur de périphériques Samsung et recevoir des informations du fabricant, cochez cette case et cliquez sur Terminer. Si le pilote est installé correctement, vous pouvez trouver le pilote d’impression universel Samsung Universal Print Driver dans le dossier Imprimantes et télécopieurs. Désinstallation du pilote d’impression universel Samsung Universal Print Driver Si vous voulez désinstaller le pilote d’impression universel Samsung Universal Print Driver, suivez les étapes suivantes : 1. Dans le menu Démarrer de Windows, sélectionnez > Tous les programmes > Samsung Universal Print Driver > Maintenance. L’assistant d’installation du pilote d’impression universel Samsung Universal Print Driver s’ouvre. 2. Sélectionnez Supprimer, puis cliquez sur Suivant. 3. Sélectionnez les composants à supprimer, puis cliquez sur Suivant. 4. Lorsqu’un message de confirmation s’affiche, cliquez sur Oui. 5. Une fois la désinstallation terminée, cliquez sur Terminer. Utilisation du pilote d’impression universel Samsung Universal Print Driver_ 7 3.Utilisation du pilote d’impression universel Samsung Universal Print Driver Le principal objectif du pilote d’impression universel Samsung Universal Print Driver est d’installer un pilote (Samsung Universal Print Driver) et de l’utiliser avec différents périphériques d’impression. Toutefois, le pilote d’impression universel Samsung Universal Print Driver dispose d’autres fonctions, comme la recherche de périphériques d’impression, la création d’un dossier de favoris et la vérification de l’état d’un périphérique. Accès au pilote d’impression universel Samsung Universal Print Driver 1. Dans le menu Démarrer de Windows, sélectionnez Imprimantes et télécopieurs. 2. Cliquez avec le bouton droit de la souris sur Samsung Universal Print Driver. 3. Cliquez sur Options d’impression ou sur Propriétés. La fenêtre du pilote d’impression universel Samsung Universal Print Driver s’ouvre. Si aucune imprimante n’a été utilisée récemment, une fenêtre indépendante vous demandant de rechercher des imprimantes s’ouvre. Cliquez sur OK pour rechercher les imprimantes connectées. Utilisation du pilote d’impression universel Samsung Universal Print Driver_ 8 Aperçu de la mise en page 1 Barre de mise en page Inclut les options d’affichage. • : Sélectionne la mise en page de la fenêtre du pilote d’impression universel Samsung Universal Print Driver . Si vous choisissez Mise en page2 et que le programme Samsung Smart Panel est installé, vous pouvez voir la fenêtre d’état (numéro 4). • : Actualise toutes les informations relatives à l’imprimante dans la liste. • : Sélectionne le type de vue pour la liste des imprimantes. Vue détaillée affiche les informations relatives à l’imprimante, comme son Adresse, son Emplacement, son État et son Nom système. Vue image affiche également les informations relatives à l’imprimante, sauf dans le cas d’une image d’imprimante plus grande. Cette option n’est prise en charge que sous Windows XP (et ultérieur). • : Affiche la liste des imprimantes par groupes. Cette option n’est prise en charge que sous Windows XP (et ultérieur). • : Recherche une imprimante dans la liste en fonction d’un mot clé, comme un nom de modèle. • : Ouvre la fenêtre d’aide. • : Affiche des informations relatives au pilote d’impression universel Samsung Universal Print Driver.Utilisation du pilote d’impression universel Samsung Universal Print Driver_ 9 2 Menus principaux • Récent - Imprimantes récemment utilisées : Affiche la liste des imprimantes récemment utilisées. L’imprimante utilisée le plus récemment est en haut de la liste. - Imprimantes récemment recherchées : Affiche la liste des imprimantes récemment trouvées. L’imprimante trouvée le plus récemment est en haut de la liste. • Recherche - Rechercher maintenant : Recherche les imprimantes connectées via USB ou via le réseau. - Rechercher par adresse : Recherche une imprimante en fonction de son adresse IP. • Mon imprimante - Créer un dossier favori : Crée un dossier d’imprimantes favorites. • Paramètres : Affiche les options pour les fenêtres indépendantes et les recherches. 3 Liste des imprimantes Affiche la liste des imprimantes. 4 Fenêtre d’état Affiche l’état de l’imprimante sélectionnée dans la liste. Vous devez sélectionner Mise en page2 et installer le programme Samsung Smart Panel pour voir cette fenêtre. • Mettre à jour maintenant : Met à jour les informations de l’imprimante sélectionnée. • Achat de fournitures : Ouvre le site Web d’achat de fournitures. • Guide de dépannage : Ouvre le chapitre de dépannage du mode d’emploi. Vous devez installer le programme Smart Panel du modèle que vous utilisez pour voir le guide de dépannage. • Paramètres de l’imprimante : Ouvre le Service Web SyncThru, qui propose des options de configuration et de gestion de votre imprimante. Vous ne pouvez utiliser cette option qu’avec des imprimantes réseau. Utilisation du pilote d’impression universel Samsung Universal Print Driver_ 10 Modification des paramètres du pilote d’impression universel Samsung Universal Print Driver Configuration de l’option de fenêtre indépendante Vous pouvez configurer la fenêtre du pilote d’impression universel Samsung Universal Print Driver pour qu’elle s’affiche lorsque vous réalisez une impression. Il existe quatre options pour l’affichage de cette fenêtre indépendante : 1. Cliquez sur le bouton Paramètres dans le coin inférieur gauche. 2. Cliquez sur l’onglet Fenêtre contextuelle. La figure suivante montre un exemple d’onglet Fenêtre contextuelle. • Lorsque l'interface du pilote apparaît: La fenêtre du pilote d’impression universel Samsung Universal Print Driver s’affiche lorsque vous ouvrez une fenêtre Options d’impression (Propriétés). • A chaque impression: La fenêtre du pilote d’impression universel Samsung Universal Print Driver s’affiche chaque fois que vous réalisez une impression. • Seulement lors de la première impression: La fenêtre du pilote d’impression universel Samsung Universal Print Driver s’affiche uniquement la première fois que le pilote d’impression universel Samsung Universal Print Driver est sélectionné comme imprimante depuis une application. • Seulement lorsque la dernière imprimante utilisée n’est pas disponible: La fenêtre du pilote d’impression universel Samsung Universal Print Driver ne s’affiche que si la dernière imprimante utilisée n’est pas disponible. 3. Cliquez sur OK. Utilisation du pilote d’impression universel Samsung Universal Print Driver_ 11 Configuration de l’option de recherche de l’imprimante Pour configurer les options de recherche du pilote d’impression universel Samsung Universal Print Driver, suivez les étapes suivantes : 1. Cliquez sur le bouton Paramètres dans le coin inférieur gauche. 2. Cliquez sur l’onglet Rechercher et sélectionnez une des options suivantes. • Rechercher uniquement les imprimantes prises en charge: Recherche uniquement les imprimantes connectées prises en charge. Cliquez sur pour voir la liste des périphériques Samsung pris en charge. • Rechercher toutes les imprimantes: Recherche toutes les imprimantes connectées. 3. Cliquez sur OK. Utilisation du pilote d’impression universel Samsung Universal Print Driver_ 12 Recherche des périphériques d’impression Par adresse TCP/IP Si vous connaissez l’adresse TCP/IP du périphérique d’impression que vous souhaitez utiliser, vous pouvez le rechercher en tapant son adresse TCP/IP. Suivez les étapes ci-dessous : 1. Dans le menu Démarrer de Windows, sélectionnez Imprimantes et télécopieurs. 2. Cliquez avec le bouton droit de la souris sur le pilote d’impression universel Samsung Universal Print Driver. 3. Cliquez sur Options d’impression ou sur Propriétés. La fenêtre du pilote d’impression universel Samsung Universal Print Driver s’ouvre. 4. Cliquez sur Rechercher par adresse. Une fenêtre s’ouvre. 5. Tapez l’adresse TCP/IP de votre imprimante et cliquez sur OK. Par le menu Rechercher maintenant Si vous ne connaissez pas l’adresse TCP/IP du périphérique d’impression que vous voulez utiliser, vous pouvez utiliser l’option Rechercher maintenant pour rechercher le périphérique. Suivez les étapes ci-dessous : 1. Dans le menu Démarrer de Windows, sélectionnez Imprimantes et télécopieurs. 2. Cliquez avec le bouton droit de la souris sur le pilote d’impression universel Samsung Universal Print Driver 3. Cliquez sur Options d’impression ou sur Propriétés. La fenêtre du pilote d’impression universel Samsung Universal Print Driver s’ouvre. 4. Cliquez sur Rechercher maintenant. Le pilote d’impression universel Samsung Universal Print Driver recherche les périphériques d’impression connectés. Le résultat de la recherche peut varier en fonction de l’option de recherche que vous avez sélectionnée (Voir « Configuration de l’option de recherche de l’imprimante » à la page 11.)Utilisation du pilote d’impression universel Samsung Universal Print Driver_ 13 Création d’un dossier de favoris Pour des raisons pratiques, vous pouvez créer un dossier contenant les imprimantes que vous utilisez le plus souvent. Par exemple, si vous naviguez entre votre domicile et plusieurs sites de travail, vous pouvez créer deux dossiers d’imprimantes différents ; Domicile et Travail, puis gérer les imprimantes selon vos préférences. Pour créer un dossier de favoris, suivez les étapes suivantes : 1. Cliquez sur Créer un dossier favori. La fenêtre Ajouter un nouveau dossier de favoris s’ouvre. 2. Tapez un nom de dossier. 3. Cliquez sur OK. Un nouveau dossier est ajouté dans Mon imprimante. Pour ajouter des imprimantes à un dossier dans Mon imprimante, vous pouvez glisser-déposer le dossier ou cliquer avec le bouton droit de la souris dans la liste et sélectionner Déplacer ou Copier. Utilisation du pilote d’impression universel Samsung Universal Print Driver_ 14 Aide Cliquez sur le bouton Aide ( ) en haut à droite de la fenêtre du pilote d’impression universel Samsung Universal Print Driver. Une fenêtre d’aide s’ouvre. Utilisez cette aide pour trouver les réponses à vos questions au sujet du pilote d’impression universel Samsung Universal Print Driver. Impression à l’aide du pilote d’impression universel Samsung Universal Print Driver Impression de base Pour imprimer un document en utilisant le pilote d’impression universel Samsung Universal Print Driver, suivez les étapes suivantes : Les étapes suivantes montrent une impression à partir de Notepad. Les noms des menus peuvent varier en fonction de l’application que vous utilisez. 1. Ouvrez le fichier que vous souhaitez imprimer dans une application. 2. Dans la barre de menu, sélectionnez Fichier > Imprimer. 3. Sélectionnez le pilote d’impression universel Samsung Universal Print Driver dans la liste des imprimantes. 4. Cliquez sur OK. L’impression démarre. Ou, en fonction de l’option de fenêtre indépendante (voir « Configuration de l’option de fenêtre indépendante » à la page 10) que vous avez sélectionnée, la fenêtre du pilote d’impression universel Samsung Universal Print Driver peut s’ouvrir avant l’impression. Sélectionnez l’imprimante que vous souhaitez utiliser et imprimez. Changement de l’imprimante sélectionnée 1. Dans le menu Démarrer de Windows, sélectionnez Imprimantes et télécopieurs. 2. Cliquez avec le bouton droit de la souris sur le pilote d’impression universel Samsung Universal Print Driver. 3. Cliquez sur Options d’impression ou sur Propriétés. La fenêtre Options d’impression (Propriétés) s’ouvre. 4. Sélectionnez une autre imprimante dans la liste des imprimantes ou en effectuant une recherche (Voir « Recherche des périphériques d’impression » à la page 12). 5. Cliquez sur OK. Toutes les impressions suivantes sont alors dirigées vers la nouvelle imprimante.Index_ 15 Index A accès 7 C configuration requise 4 copyright 2 D définition 10 fenêtre indépendante 10 option de recherche 11 désinstallation 6 différence 4 dossier 13 I impression 14 installation 5 introduction 4 M mise en page 8 R recherche bouton de recherche 12 TCPIP 12 U utilisation 7 SCX-3200 Series Multi-Functional Mono Printer User’s Guide imagine the possibilities Thank you for purchasing a Samsung product. Copyright_ 2 copyright © 2010 Samsung Electronics Co., Ltd. All rights reserved. This user’s guide is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide. • Samsung and the Samsung logo are trademarks of Samsung Electronics Co., Ltd. • PCL and PCL 6 are trademarks fo Hewlett-Packard Company. • Microsoft, Windows, Windows Vista, Windows 7, and Windows Server 2008 R2 are either registered trademarks or trademarks of Microsoft Corporation. • PostScript 3 is a trademark of Adobe System, Inc. • USFT® and MicroType™ are registed trademarks of Monotype Imaging Inc. • iPad, iPhone, iPod touch, TrueType, Mac and Mac OS are trademarks of Apple Inc., registered in the U.S and other countries. AirPrint and the AirPrint logo are trademarks of Apple Inc. • LaserWriter is a trademark of Apple Inc. • All other brand or product names are trademarks of their respective companies or organizations. Refer to the 'LICENSE.txt' file in the provided CD-ROM for the open source license information. REV. 1.01Safety information_ 3 safety information These warnings and precautions are included to prevent injury to you and others, and to prevent any potential damage to your machine. Be sure to read and understand all of these instructions before using the machine. Use common sense for operating any electrical appliance and whenever using your machine. Also, follow all warnings and instructions marked on the machine and in the accompanying literature. After reading this section, keep it in a safe place for future reference. IMPORTANT SAFETY SYMBOLS This section explains the meanings of all icons and signs in the user's guide. These safety symbols are in order, according to the degree of danger. Explanation of all icons and signs used in the user’s guide: Warning Hazards or unsafe practices that may result in severe personal injury or death. Caution Hazards or unsafe practices that may result in minor personal injury or property damage. Do not attempt. Do not disassemble. Do not touch. Unplug the power cord from the wall socket. Make sure the machine is grounded to prevent electric shock. Call the service center for help. Follow directions explicitly. OPERATING ENVIRONMENT Warning Do not use if the power cord is damaged or if the electrical outlet is not grounded. ► This could result in electric shock or fire. Do not bend, or place heavy objects on the power cord. ► Stepping on or allowing the power cord to be crushed by a heavy object could result in electric shock or fire. Do not place anything on top of the machine (water, small metal or heavy objects, candles, lit cigarettes, etc.). ► This could result in electric shock or fire. Do not remove the plug by pulling on the cord; do not handle the plug with wet hands. ► This could result in electric shock or fire. Safety information_ 4 Caution During an electrical storm or for a period of non-operation, remove the power plug from the electrical outlet. ► This could result in electric shock or fire. If the plug does not easily enter the electrical outlet, do not attempt to force it in. ► Call an electrician to change the electrical outlet, or this could result in electric shock. Be careful, the paper output area is hot. ► Burns could occur. Do not allow pets to chew on the AC power, telephone or PC interface cords. ► This could result in electric shock or fire and/or injury to your pet. If the machine has been dropped, or if the cabinet appears damaged, unplug the machine from all interface connections and request assistance from qualified service personnel. ► Otherwise, this could result in electric shock or fire. If the machine does not operate properly after these instructions have been followed, unplug the machine from all interface connections and request assistance from qualified service personnel. ► Otherwise, this could result in electric shock or fire. If the machine exhibits a sudden and distinct change in performance, unplug the machine from all interface connections and request assistance from qualified service personnel. ► Otherwise, this could result in electric shock or fire. OPERATING METHOD Caution Do not forcefully pull the paper out during printing. ► It can cause damage to the machine. When printing large quantities, the bottom part of the paper output area may get hot. Do not allow children to touch. ► Burns can occur. Be careful not to put your hand between the machine and paper tray. ► You may get injured. When removing jammed paper, do not use tweezers or sharp metal objects. ► It can damage the machine. Do not block or push objects into the ventilation opening. ► This could result in elevated component temperatures which can cause damage or fire. Do not allow too many papers to stack up in the paper output tray. ► It can damage the machine. Be care when replacing paper or removing jammed paper. ► New paper has sharp edges and can cause painful cuts. This machine's power interception device is the power cord. ► To switch off the power supply, remove the power cord from the electrical outlet. If the machine gets overheated, it releases smoke, makes strange noises, or generates an odd odor, immediately turn off the power switch and unplug the machine. ► This could result in electric shock or fire. Safety information_ 5 INSTALLATION / MOVING Warning Do not place the machine in an area with dust, humidity or water leaks. ► This could result in electric shock or fire. Caution Before moving the machine, turn the power off and disconnect all cords. Then lift the machine: • If the machine weighs under 20 kg (44.09lb), lift with 1 person. • If the machine weighs 20 kg (44.09lb) - 40kg (88.18lb), lift with 2 people. • If the machine weighs more than 40 kg (88.18lb), lift with 4 or more people. ► The machine could fall, causing injury or machine damage. Do not put a cover over the machine or place it in an airtight location, such as a closet. ► If the machine is not well-ventilated, this could result in fire. Do not place the machine on an unstable surface. ► The machine could fall, causing injury or machine damage. Make sure you plug the power cord into a grounded electrical outlet. ► Otherwise, this could result in electric shock or fire. The machine should be connected to the power level which is specified on the label. ► If you are unsure and want to check the power level you are using, contact the electrical utility company. Do not overload wall outlets and extension cords. ► This can diminish performance, and could result in electric shock or fire. Use only No.26 AWG a a. AWG: American Wire Gauge or larger, telephone line cord, if necessary. ► Otherwise, it can cause damage to the machine. Use the power cord supplied with your machine for safe operation. If you are using a cord which is longer than 2 meters (6 feet) with a 140V machine, then the gauge should be 16 AWG or larger. ► Otherwise, it can cause damage to the machine, and could result in electric shock or fire. MAINTENANCE / CHECKING Caution Unplug this product from the wall outlet before cleaning the inside of the machine. Do not clean the machine with benzene, paint thinner or alcohol; do not spray water directly into the machine. ► This could result in electric shock or fire. Keep cleaning supplies away from children. ► Children could get hurt.Safety information_ 6 SUPPLY USAGE Caution Do not disassemble the toner cartridge. ► Toner dust can be dangerous if inhaled or ingested. When storing supplies such as toner cartridges, keep them away from children. ► Toner dust can be dangerous if inhaled or ingested. Do not burn any of the supplies such as toner cartridge or fuser unit. ► This could cause an explosion or uncontrollable fire. Using recycled supplies, such as toner, can cause damage to the machine. ► In case of damage due to the use of recycled supplies, a service fee will be charged. When changing the toner cartridge or removing jammed paper, be careful not to let toner dust touch your body or clothes. ► Toner dust can be dangerous if inhaled or ingested. When toner gets on your clothing, do not use hot water to wash it. ► Hot water sets toner into fabric. Use cold water. When you are working inside the machine replacing supplies or cleaning the inside, do not operate the machine. ► You could get injured. Do not disassemble, repair or rebuild the machine by yourself. ► It can damage the machine. Call a certified technician when the machine needs repair. Keep the power cable and the contact surface of the plug clean from dust or water. ► Otherwise, this could result in electric shock or fire. To clean and operate the machine, strictly follow the user's guide provided with the machine. ► Otherwise, you could damage the machine. Do not remove any covers or guards that are fastened with screws. ► The machine should only be repaired by a Samsung service technician. Fuser units should only be repaired by a certified service technician. ► Repair by non-certified technicians could result in fire or electric shock. Regulatory information_ 7 regulatory information This machine is designed for a normal work environment and certified with several regulatory statements. LASER SAFETY STATEMENT The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1:1993 + A1:1997 + A2:2001. Class I laser products are not considered to be hazardous. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance or prescribed service condition. • Wavelength: 800 nm • Beam divergence - Paraller: 13 degrees - Perpendicular: 35 degrees • Maximum power or energy output: 12 mW WARNING Never operate or service the printer with the protective cover removed from Laser/Scanner assembly. The reflected beam, although invisible, can damage your eyes. When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons: OZONE SAFETY During normal operation, this machine produces ozone. The ozone produced does not present a hazard to the operator. However, it is advisable that the machine be operated in a well ventilated area. If you need additional information about ozone, contact your local Samsung dealer.Regulatory information_ 8 POWER SAVE This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use. When the printer does not receive data for an extended period of time, power consumption is automatically lowered. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. For more information on the ENERGY STAR program see http://www.energystar.gov. RECYCLING Recycle or dispose of the packaging material for this product in an environmentally responsible manner. CHINA ONLY CORRECT DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL & ELECTRONIC EQUIPMENT) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. RADIO FREQUENCY EMISSIONS FCC Information to the User This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Regulatory information_ 9 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or experienced radio TV technician for help. Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. Canadian Radio Interference Regulations This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry and Science Canada. Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe B prescrites dans la norme sur le matériel brouilleur: “Appareils Numériques”, ICES-003 édictée par l’Industrie et Sciences Canada. UNITED STATES OF AMERICA Federal Communications Commission (FCC) Intentional emitter per FCC Part 15 Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in your printer system. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices. Wireless devices that may be in your system are only qualified for use in the United States of America if an FCC ID number is on the system label. The FCC has set a general guideline of 20 cm (8 inches) separation between the device and the body, for use of a wireless device near the body (this does not include extremities). This device should be used more than 20 cm (8 inches) from the body when wireless devices are on. The power output of the wireless device (or devices), which may be embedded in your printer, is well below the RF exposure limits as set by the FCC. This transmitter must not be collocated or operation in conjunction with any other antenna or transmitter. Operation of this device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact manufacturer for service. FCC Statement for Wireless LAN use: While installing and operating this transmitter and antenna combination the radio frequency exposure limit of 1m W/cm2 may be exceeded at distances close to the antenna installed. Therefore, the user must maintain a minimum distance of 20cm from the antenna at all times. This device cannot be colocated with another transmitter and transmitting antenna. TURKEY ONLY GERMANY ONLYRegulatory information_ 10 RUSSIA ONLY REPLACING THE FITTED PLUG (FOR UK ONLY) Important The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until you have another fuse cover. Contact the people from you purchased the machine. The 13 amp plug is the most widely used type in the UK and should be suitable. However, some buildings (mainly old ones) do not have normal 13 amp plug sockets. You need to buy a suitable plug adaptor. Do not remove the moulded plug. If you cut off the moulded plug, get rid of it straight away. You cannot rewire the plug and you may receive an electric shock if you plug it into a socket. Important warning: You must earth this machine. The wires in the mains lead have the following color code: • Green and Yellow: Earth • Blue: Neutral • Brown: Live If the wires in the mains lead do not match the colors marked in your plug, do the following: You must connect the green and yellow wire to the pin marked by the letter “E” or by the safety ‘Earth symbol’ or colored green and yellow or green. You must connect the blue wire to the pin which is marked with the letter “N” or colored black. You must connect the brown wire to the pin which is marked with the letter “L” or colored red. You must have a 13 amp fuse in the plug, adaptor, or at the distribution board. DECLARATION OF CONFORMITY (EUROPEAN COUNTRIES) Approvals and Certifications The CE marking applied to this product symbolizes Samsung Electronics Co., Ltd. Declaration of Conformity with the following applicable 93/68/EEC Directives of the European Union as of the dates indicated: SCX-3200 Series: Low Voltage Directive (2006/95/EC), EMC Directive (2004/108/EC) SCX-3205W(K): R&TTE Directive (1999/5/EC) The declaration of conformity may be consulted at www.samsung.com/printer, go to Support > Download center and enter your printer (MFP) name to browse the EuDoC. January 1, 1995: Council Directive 2006/95/EC Approximation of the laws of the member states related to low voltage equipment. January 1, 1996: Council Directive 2004/108/EC (92/31/EEC), approximation of the laws of the Member States related to electromagnetic compatibility. March 9, 1999: Council Directive 1999/5/EC on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. A full declaration, defining the relevant Directives and referenced standards can be obtained from your Samsung Electronics Co., Ltd. representative.Regulatory information_ 11 EC Certification Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal Equipment Directive (FAX) This Samsung product has been self-certified by Samsung for pan-European single terminal connection to the analogue public switched telephone network (PSTN) in accordance with Directive 1999/5/EC. The product has been designed to work with the national PSTNs and compatible PBXs of the European countries: In the event of problems, you should contact the Euro QA Lab of Samsung Electronics Co., Ltd. in the first instance. The product has been tested against TBR21. To assist in the use and application of terminal equipment which complies with this standard, the European Telecommunication Standards Institute (ETSI) has issued an advisory document (EG 201 121) which contains notes and additional requirements to ensure network compatibility of TBR21 terminals. The product has been designed against, and is fully compliant with, all of the relevant advisory notes contained in this document. European Radio Approval Information (for products fitted with EU-approved radio devices) Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz band, may be present (embedded) in your printer system which is intended for home or office use. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices. Wireless devices that may be in your system are only qualified for use in the European Union or associated areas if a CE mark with a Notified Body Registration Number and the Alert Symbol is on the system label. The power output of the wireless device or devices that may be embedded in you printer is well below the RF exposure limits as set by the European Commission through the R&TTE directive. European States qualified under wireless approvals: EU Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France (with frequency restrictions), Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, The Netherlands, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden and the U.K. EEA/EFTA countries Iceland, Liechtenstein, Norway and Switzerland European States with restrictions on use: EU In France, the frequency range is restricted to 2446.5-2483.5 MHz for devices above 10 mW transmitting power such as wireless EEA/EFTA countries No limitations at this time REGULATORY COMPLIANCE STATEMENTS Wireless Guidance Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in your printer system. The following section is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections). The wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label. If the country you will be using the wireless device in, is not listed, contact your local Radio Approval agency for requirements. Wireless devices are closely regulated and use may not be allowed. The power output of the wireless device or devices that may be embedded in your printer is well below the RF exposure limits as known at this time. Because the wireless devices (which may be embedded into your printer) emit less energy than is allowed in radio frequency safety standards and recommendations, manufacturer believes these devices are safe for use. Regardless of the power levels, care should be taken to minimize human contact during normal operation. As a general guideline, a separation of 20 cm (8 inches) between the wireless device and the body, for use of a wireless device near the body (this does not include extremities) is typical. This device should be used more than 20 cm (8 inches) from the body when wireless devices are on and transmitting. This transmitter must not be collocated or operation in conjunction with any other antenna or transmitter. Some circumstances require restrictions on wireless devices. Examples of common restrictions are listed below: Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless devices to be turned off while traveling in an airplane. IEEE 802.11 (also known as wireless Ethernet) and Bluetooth communication devices are examples of devices that provide wireless communication.Regulatory information_ 12 OPENSSL LICENSE Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)". 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without Prior written permission. For written permission, please contact openssl-core@openssl.org. 5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project. 6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)". THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). ORIGINAL SSLEAY LICENSE Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com). Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. In environments where the risk of interference to other devices or services is harmful or perceived as harmful, the option to use a wireless device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated. When in environments where you are uncertain of the sanction to use wireless devices, ask the applicable authority for authorization prior to use or turning on the wireless device. Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless device, when traveling between countries with your system, check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country. If your system came equipped with an internal embedded wireless device, do not operate the wireless device unless all covers and shields are in place and the system is fully assembled. Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact manufacturer for service. Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact manufacturer Technical Support for additional information.Regulatory information_ 13 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)" The word 'cryptographic' can be left out if the routines from the library being used are not cryptographic related. 4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson (tjh@cryptsoft.com)". THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.Regulatory information_ 14 CHINA ONLYAbout this user’s guide_ 15 about this user’s guide This user’s guide provides information about basic understanding of the machine as well as detailed explanation on each step during actual usage. It is a valuable resource for both novice and professional users for the proper installation and use of the machine. • Read the safety information before using the machine. • If you have a problem using the machine, refer to the troubleshooting chapter (See "Troubleshooting" on page 77). • Terms used in this user’s guide are explained in the glossary chapter (See "Glossary" on page 96). • Illustrations in this user’s guide may differ from your machine depending on its options or models. • The procedures in this user’s guide are mainly based on Windows XP. CONVENTION Some terms in this guide are used interchangeably, as below: • Document is synonymous with original. • Paper is synonymous with media, or print media. • Machine refers to printer or MFP. The following table offers the conventions of this guide: CONVENTION DESCRIPTION EXAMPLE Bold For texts on the display or button names on the machine. Power Note Provides additional information or details for the machine function and feature. The date format may differ from country to country. Caution Contains information you can use to protect the machine from possible mechanical damage or malfunction. Do not touch the surface of the drum located in the toner cartridge or imaging unit. Footnote Provides additional information on certain words or a phrases. a. pages per minute (“Cross-reference”) Refers you to additional detailed information. (See "Finding more information" on page 16).About this user’s guide_ 16 FINDING MORE INFORMATION You can find information about setting up and using your machine in the following resources, either as a print-out or on screen. MATERIAL NAME DESCRIPTION Quick Installation Guide This guide provides information on setting up your machine. This guide is provided in the box with the printer. User’s Guide This guide provides you with step-by-step instructions for using your machine’s full features, maintaining your machine, troubleshooting, and replacing supplies. Machine Driver Help This help provides you with information about the printer driver and instructions for setting up the options for printing (See "Using help" on page 56). Samsung website If you have Internet access, you can get help, support, machine drivers, manuals, and order information from the Samsung website, www.samsung.com/printer. Downloadable software You can download useful software programs from the Samsung website. • Samsung AnyWeb Print: helps personal users to screen-capture the website screen in Windows Internet Explorer easily. (http://solution.samsungprinter.com/personal/anywebprint) • SyncThru™ Web Admin Service: provides convenient tools for network administrators who need to manage many machines simultaneously. This program is for network model only. (http://solution.samsungprinter.com, See "Features by Models" on page 18)Features of your new product_ 17 features of your new product Your new machine is equipped with a number of special features that improve the quality of the documents you print. SPECIAL FEATURES Print with excellent quality and speed • You can print with a resolution of up to 1200 x 1200 dpi effective output. • Your machine prints A4-sized paper at up to 16 ppm and letter-sized paper at up to 17 ppm. Handle many different types of printable material • The 150-sheet tray supports plain paper in various sizes, letterhead, envelopes, labels, custom-sized media, postcards, and heavy paper. Create professional documents • Print Watermarks. You can customize your documents with words, such as “Confidential” (See "Using watermarks" on page 57). • Print Posters. The text and pictures of each page of your document are magnified and printed across the sheet of paper and can then be taped together to form a poster (See "Printing posters" on page 56). • You can use preprinted forms and letterhead with plain paper (See "Using overlays" on page 58). Save time and money • To save paper, you can print multiple pages on one single sheet of paper (See "Printing multiple pages on one sheet of paper" on page 56). • This machine automatically conserves electricity by substantially reducing power consumption when not in use. • To save paper, you can print on both sides of the paper manually (See "Printing on both sides of the paper (Manual)" on page 56). Print in various environments • You can print with various operating systems such as Windows, Linux, and Macintosh OS systems. • Your machine is equipped with a Hi-Speed USB 2.0 interface. • Your machine comes with a built-in network interface, Ethernet 10/100 BaseTX. SCX-3205W(K) only) • Your machine comes with a built-in network interface 802.11 b/g/n wireless LAN. (SCX-3205W(K) only) For some counties, only 802.11 b/g can be applied. Copy the original in high quality • You can copy the original and print them in enhanced image quality and size. Scan the originals • Scan in color and use the precise compressions of BMP, JPEG, TIFF and PDF formats. • Use one button to scan your original to the connected computer. Eco Print • You can reduce toner and paper usage (See "Eco Print button" on page 22). IPv6 (SCX-3205W(K) only) • The machine supports IPv6 (See "IPv6 Configuration" on page 34). AirPrint AirPrint allows you to wirelessly print directly from iPhone, iPad and iPod touch running iOS 4.2 or later.Features of your new product_ 18 FEATURES BY MODELS The machine is designed to support all of your document needs from printing to more advanced networking solutions for your business. Features by models include: FEATURES SCX-3200 SERIES SCX-3205W(K) SERIES Print ● ● Eco Print ● ● Duplex (2-sided) printing (manual) ● ● Copy ● ● Scan ● ● Hi-Speed USB 2.0 ● ● Print Screen ● IPv6 ● Network Interface Ethernet 10/100 Base TX wired LAN ● Network Interface 802.11b/g/n wireless LAN a a.Depending on your country, wireless LAN card may not be available. For some counties, only 802.11 b/g can be applied. Contact your local Samsung dealer or the retailer where you bought your machine. ● SyncThru™ Web Service ● (●: Included, Blank: Not included) Introduction_ 19 1.introduction This chapter gives you an overview of your machine: This chapter includes: • Machine overview • Control panel overview • Understanding the status LED • Introducing the useful buttons MACHINE OVERVIEW Front view 3 6 1 10 11 12 9 7 8 5 4 2 13 14 This illustration may differ from your machine depending on its model. 1 Scanner lid 6 Front door 11 Inner cover 2 Scanner glass 7 Tray 12 Toner cartridge 3 Control panel 8 Paper length guide 13 Toner cartridge handle 4 Output tray (face down) 9 Paper width guide 14 Toner cartridge drum 5 Output support 10 Scan unitIntroduction_ 20 Rear view 1 2 3 This illustration may differ from your machine depending on its model. 1 USB port 2 Power cord receptacle 3 Network port a a.SCX-3205W(K) onlyIntroduction_ 21 CONTROL PANEL OVERVIEW This control panel may differ from your machine depending on its model. 1 2 3 4 5 6 7 8 9 10 11 13 12 1 Power ( ) Allows you to turn the power on or off (See "Power button" on page 23). 2 Eco Print Turn the Eco mode on or off (See "Eco Print button" on page 22). 3 Scan to Sends scanned data (See "Scanning originals and sending to your computer (Scan to PC)" on page 64). 4 ID Copy Allows you to copy both sides the ID card like a driver’s license to a single side of paper (See "ID card copying" on page 63). 5 Front LED When the LED lights on, place the front side of an ID card facing down on the scanner glass (See "ID card copying" on page 63). 6 Back LED When the LED lights on, place the back side of an ID card facing down on the scanner glass (See "ID card copying" on page 63). 7 Display Shows the number of pages you want to copy. 8 +/- Buttons Allows you to increase/decrease the number of page you want to copy (See "+/- buttons" on page 22). 9 Print Screen (SCX-3200 only) Prints the displayed screen of your monitor (See "Print Screen button (SCX-3200 only)" on page 22). WPS (SCX-3205W(K) only) Allows you to turn on or off the wireless network connection (See "WPS button (SCX-3205W(K))" on page 22). 10 Stop/Clear ( ) Stops an operation at any time and there are more functions (See "Stop/Clear button" on page 23). 11 Start ( ) Begins a printing, copying or scanning job depending on which function you are using. 12 Wireless LED (SCX-3205W(K) only) Shows the current status of the wireless network connection (See "Understanding the status LED" on page 22). 13 Status LED Shows the status of your machine (See "Understanding the status LED" on page 22).Introduction_ 22 UNDERSTANDING THE STATUS LED Status LED The color of the LED indicates the machine's current status. STATUS LED DESCRIPTION Off • The machine is off-line. • The machine is in sleep mode. Green On • The machine is in ready mode or warming up. Blinking • When the LED blinks slowly, the machine is receiving data from the computer or printing documents. • When the LED blinks rapidly, the machine is operating special functions. Red On • The inner cover is opened. Close the inner cover completely. • There is no paper in the tray. Load paper in the tray. • The machine has stopped due to a major error. • Your system has some problems. If this problem occurs, contact a service representative. • A toner cartridge has almost reached its estimated cartridge life a a.Estimated cartridge life means the expected or estimated toner cartridge life, which indicates the average capacity of print-outs and is designed pursuant to ISO/IEC 19752. The number of pages may be affected by operating environment, percentage of image area, printing interval, media type, and media size. Some amount of toner may remain in the cartridge even when red LED is on and the printer stops printing. . It is recommended to replace the toner cartridge (See "Replacing the toner cartridge" on page 89). Blinking • A small amount of toner is left in the cartridge. The estimated cartridge life a of toner is close. Prepare a new cartridge for replacement. You may temporarily increase the printing quality by redistributing the toner (See "Redistributing toner" on page 77). • The machine is printing in manual feed mode or in manual duplex mode. Orange On A paper jam has occurred (See "Clearing paper jams" on page 78). Samsung does not recommend using a non-genuine Samsung toner cartridge such as one that is refilled or remanufactured. Samsung cannot guarantee a non-genuine Samsung toner cartridge's quality. Service or repair required as a result of using non-genuine Samsung toner cartridges will not be covered under the machine warranty. All printing errors will appear in the Smart Panel program window. If the problem persists, contact a service representative. Wireless LED (SCX-3205W(K) only) WIRELESS LED STATUS DESCRIPTION Blue Off ( ) Wireless network is disconnected. On ( ) Wireless network is connected. Slowly blinks ( ) The machine starts connecting to a wireless network. Fast blinks ( ) • The machine is connecting to access point (or wireless router). • Wireless network connection is being disconnected. INTRODUCING THE USEFUL BUTTONS Print Screen button (SCX-3200 only) If you press Print Screen button for less than two seconds, the green light blinks fast on the Status LED, and then the machine prints the whole screen displayed in the monitor. If you press Print Screen button for more than two seconds, the Status LED lights on green, and then the machine prints an active screen displayed in the monitor. • The page will be printed on the default page like A4 or Letter. • Print Screen can only be used in the Windows and Macintosh operating systems. • You can only use this function with a USB-connected machine. • You can use this function only when the Smart Panel program is installed and running. • You can only use this function in Eco Print mode off. Eco Print button You can turn the Eco Print mode on or off by simply pressing the button. If you set the Eco Print mode on, the machine automatically sets the 2-UP and Toner Save option on and print with those options. 1. Press Eco Print button on the control panel. 2. Eco Print LED lights on. Then, Eco Print mode is on. To turn off Eco Print mode, press Eco Print button one more time. +/- buttons You can determine the number of copies (up to 99 copies) you want to copy by pressing +/- buttons. The default setting value is 1. • If you press +/- buttons briefly, the number of copies increases/decreases by single digits. • If you press +/- buttons long, the number of copies increases/decreases by ten-fold. WPS button (SCX-3205W(K)) This feature automatically detects which WPS (Wi-Fi Protected Setup™) mode your access point uses. By pushing a button on the wireless LAN router/access point and the machine, you can setup the wireless network and security settings (See "Wireless network setup (SCX-3205W(K))" on page 36).Introduction_ 23 Stop/Clear button By pressing Stop/Clear button, you can do the following functions. FUNCTION DESCRIPTION Printing a configuration report In ready mode, press and hold this button long enough (about two seconds) until the Status LED blinks slowly, and release the button (See "To print a configuration report" on page 24). Printing a network configuration report (SCX-3205W(K) only) In ready mode, press and hold this button for four seconds until the Status LED blinks fast, and release the button (See "Printing a network configuration report" on page 30). Supplies information report In the ready mode, press and hold this button for about 6 seconds until the Status LED is on, and release (See "To print a supplies information report" on page 24). Canceling print job Press Stop/Clear button during a operation. The print job is cleared from both the machine and the computer and then the machine returns to ready mode. This may take some time depending on the size of the print job. Power button By pressing Power button, you can turn the machine on or off. Turning on the machine 1. Plug in the power cord. 2. Press Power button on the control panel. When the machine is powered on, you can see LED looping on the display. Then, the machine is in ready mode. If you want to turn the power off, press and hold this button for about two seconds.Getting started_ 24 2.getting started This chapter gives you step-by-step instructions for setting up the USB connected machine and software. This chapter includes: • Setting up the hardware • Printing a report • Supplied software • System requirements • Installing USB connected machine’s driver • Sharing your machine locally SETTING UP THE HARDWARE This section shows the steps to set up the hardware, as is explained in the Quick Installation Guide. Make sure you read the Quick Installation Guide first and follow the steps below: Location 1. Select a stable location. Select a level, stable place with adequate space for air circulation. Allow extra space for opening cover(s) and tray(s). The area should be well ventilated and away from direct sunlight or sources of heat, cold, and humidity. Do not set the machine close to the edge of your desk or table. Printing is suitable for altitudes under 1,000 m (3,281 ft). Refer to the altitude setting to optimize your printing (See "Altitude adjustment" on page 46). Place the machine on a flat, stable surface so that there is no incline greater than 2 mm (0.08 inch). Otherwise, printing quality may be affected. 2mm (0.08 in) 2mm (0.08 in) 2. Unpack the machine and check all the enclosed items. 3. Remove tape holding the machine securely. 4. Install the toner cartridge. 5. Load paper (See "Loading originals" on page 48). 6. Make sure that all cables are connected to the machine. 7. Turn the machine on (See "Turning on the machine" on page 23). This machine will not operate when the power main fails. PRINTING A REPORT Print a configuration or supplies information page to make sure that the machine is operating properly. To print a configuration report In the ready mode, press and hold Stop/Clear button on the control panel for long enough (about two seconds) until the Status LED blinks slowly, and release. For SCX-3205W(K), you can print a network configuration report (See "Printing a network configuration report" on page 30). To print a supplies information report In the ready mode, press and hold Stop/Clear button on the control panel for about six seconds until the Status LED lights on, and release. SUPPLIED SOFTWARE After you have set up your machine and connected it to your computer, you must install the printer software. If you are a Windows or Macintosh OS user, install the software from the supplied CD and if you are a Linux OS user, download the software from the Samsung website (www.samsung.com/printer) and install. Machine software is occasionally updated for reasons like the release of new operating system and etc. If needed, download the latest version from the Samsung website (www.samsung.com/printer).OS CONTENTS Windows • Printer driver: Use this driver to take full advantage of your machine’s features. • Scanner driver: TWAIN and Windows Image Acquisition (WIA) drivers are available for scanning documents on your machine. • Smart Panel: This program allows you to monitor the machine’s status and alerts you when an error occurs during printing (See "Using the Smart Panel program" on page 70). • SmarThru a : a.Allows you to edit a scanned image in various ways using a powerful image editor and to send the image by email. You can also open another image editor program such as Adobe Photoshop, from SmarThru. For details, refer to the on-screen help supplied on the SmarThru program (See "SmarThru" on page 70). This program is the accompanying Windows-based software for your multifunctional machine. • Samsung Scan and Fax Manager: You can find out about Samsung Scan and Fax Manager program information and installed scan driver's condition. • Printer Settings Utility: This program allows you to set up printer’s other options from your computer. • SetIP: Use this program to set your machine’s TCP/IP addresses. (SCX-3205W(K) only) Macintosh • Printer Driver: Use this driver to take full advantage of your machine’s features. • Scanner driver: TWAIN driver is available for scanning documents on your machine. • Smart Panel: This program allows you to monitor the machine’s status and alerts you when an error occurs during printing (See "Using the Smart Panel program" on page 70). • Samsung Scan and Fax Manager: You can find out about Samsung Scan and Fax Manager program information and installed scan driver's condition. • Printer Settings Utility: This program allows you to set up printer’s other options from your computer. • SetIP: Use this program to set your machine’s TCP/IP addresses. (SCX-3205W(K) only) Linux • Unified Linux Driver: Use this driver to take full advantage of your machine’s features. • SANE: Use this driver to scan documents. • Smart Panel: This program allows you to monitor the machine’s status and alerts you when an error occurs during printing (See "Using the Smart Panel program" on page 70). • Printer Settings Utility: This program allows you to set up printer’s other options from your computer. • SetIP: Use this program to set your machine’s TCP/IP addresses. (SCX-3205W(K) only) Getting started_ 25 SYSTEM REQUIREMENTS Before you begin, ensure that your system meets the following requirements: Windows Your machine supports the following Windows operating systems. OPERATING SYSTEM REQUIREMENT (RECOMMENDED) CPU RAM FREE HDD SPACE Windows® 2000 Intel® Pentium® II 400 MHz (Pentium III 933 MHz) 64 MB (128 MB) 600 MB Windows® XP Intel® Pentium® III 933 MHz (Pentium IV 1 GHz) 128 MB (256 MB) 1.5 GB Windows Server® 2003 Intel® Pentium® III 933 MHz (Pentium IV 1 GHz) 128 MB (512 MB) 1.25 GB to 2 GB Windows Server® 2008 Intel® Pentium® IV 1 GHz (Pentium IV 2 GHz) 512 MB (2 GB) 10 GB Windows Vista® Intel® Pentium® IV 3 GHz 512 MB (1 GB) 15 GB Windows® 7 Intel® Pentium® IV 1 GHz 32-bit or 64-bit processor or higher 1 GB (2 GB) 16 GB • Support for DirectX® 9 graphics with 128 MB memory (to enable the Aero theme). • DVD-R/W Drive Windows Server® 2008 R2 Intel® Pentium® IV 1 GHz (x86) or 1.4 GHz (x64) processors (2 GHz or faster) 512 MB (2 GB) 10 GB • Internet Explorer® 5.0 or higher is the minimum requirement for all Windows operating systems. • Windows Terminal Services is compatible with your machine. Macintosh OPERATING SYSTEM REQUIREMENTS (RECOMMENDED) CPU RAM FREE HDD SPACE Mac OS X 10.3 ~ 10.4 • Intel® Processors • PowerPC G4/ G5 • 128 MB for a PowerPC based Mac (512 MB) • 512 MB for a Intel-based Mac (1 GB) 1 GBGetting started_ 26 Linux ITEM REQUIREMENTS Operating system RedHat® Enterprise Linux WS 4, 5 (32/64 bit) Fedora 4, 5, 6, 7, 8, 9, 10, 11, 12 (32/64 bit) SuSE Linux 10.0, 10.1 (32 bit) OpenSuSE® 10.2, 10.3, 11.0, 11.1, 11.2 (32.64 bit) Mandriva 2005, 2006, 2007, 2008, 2009, 2009.1 (32/64 bit) Ubuntu 5.04, 5.10, 6.06, 6.10, 7.04, 7.10, 8.04, 8.10, 9.04, 9.10 (32/64 bit) SuSE Linux Enterprise Desktop 10, 11 (32/64 bit) Debian 4.0, 5.0 (32/64 bit) CPU Pentium IV 2.4 GHz (Intel Core™2) RAM 512 MB (1 GB) Free HDD space 1 GB (2 GB) INSTALLING USB CONNECTED MACHINE’S DRIVER A locally connected machine is a machine directly connected to your computer by a USB cable. Only use a USB cable no longer than 3 m (10 ft.). Windows You can install the machine software using the typical or custom method. The following steps are recommended for most users who use a machine directly connected to your computer. All components necessary for machine operations will be installed. 1. Make sure that the machine is connected to the computer and powered on. If the “Found New Hardware Wizard” window appears during the installation procedure, click Cancel to close the window. 2. Insert the supplied software CD into your CD-ROM drive. • The software CD should automatically run and an installation window will appear. • If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your CD-ROM Drive. Click OK. • If you use Windows Vista, Windows 7 or Windows 2008 Server R2 click Start > All programs > Accessories > Run. Type X:\Setup.exe replacing “X” with the letter which represents your CD-ROM Drive and click OK. • If the AutoPlay window appears in Windows Vista, Windows 7 or Windows 2008 Server R2, click Run Setup.exe in Install or run program field, and click Continue or Yes in the User Account Control window. 3. Select Install now. If necessary, select a language from the drop-down list. • For SCX-3205W(K), you can access the Wireless Setting and Installation menu. The menu allows you to install a wireless network to connect to the machine with an USB cable (See "Wireless network setup (SCX-3205W(K))" on page 36). • The Advanced Installation has two options, Custom Installation and Install Software Only. The Custom Installation allows you to select the machine’s connection and choose individual component to install. The Install Software Only allows you to install the supplied software, such as Smart Panel. Follow the instruction on the window. 4. Read the License Agreement, and select I accept the terms of the License Agreement. Then, click Next. The software searches for the machine. If your machine is not connected to the computer, the following Mac OS X 10.5 • Intel® Processors • 867 MHz or faster Power PC G4/ G5 512 MB (1 GB) 1 GB Mac OS X 10.6 • Intel® Processors 1 GB (2 GB) 1 GB OPERATING SYSTEM REQUIREMENTS (RECOMMENDED) CPU RAM FREE HDD SPACEGetting started_ 27 window will appear. • After connecting the machine, click Next. • Check if you want to install the software without connection of the printer. - Check this option to install the software without a machine connected. In this case, the print a test page window will be skipped, and completes the installation. • Search again When you press this button, the firewall notice window appears. - Turn off the firewall and Search again. For Windows operating system, click Start > Control Panel > Windows Firewall, and inactivate this option. - Turn off the firewall from the third party's program beside the operating system. Refer to the manual provided by individual programs. • Direct Input The Direct Input allows you to search a specific machine on the network. - Search by IP address: Enter the IP address or the host name. Then click Next. To verify your machine’s IP address, print a network configuration report (See "Printing a network configuration report" on page 30). - Search by network path: To find a shared machine (UNC Path), enter the shared name manually or find a shared printer by clicking the Browse button. Then click Next. • Help - This help button gives you the detailed information about how to connect the machine. 5. The searched machines will be shown on the screen. Select the one you wish to use and click Next. If the software searched only one machine, the confirmation window appears. 6. After the installation is finished, a window asking you to print a test page appears. If you want to print a test page, click Print a test page. Otherwise, just click Next and skip to step 8. 7. If the test page prints out correctly, click Yes. If not, click No to reprint it. 8. If you want to register your machine on Samsung web site, click On-line Registration. If your machine is not connected yet to the network or computer, click How to connect?. How to connect? gives detailed information about how to connect the machine. Follow the instructions in the window. 9. Click Finish. If the printer driver does not work properly, follow the steps below to repair or reinstall the driver. a) Make sure that the machine is connected to your machine and powered on. b) From the Start menu, select Programs or All Programs > Samsung Printers > your printer driver name > Uninstall. c) Select the option you wish to execute, then follow the instruction on the window. Macintosh 1. Make sure that the machine is connected to your computer and powered on. 2. Insert the supplied software CD into your CD-ROM drive. 3. Double-click the CD-ROM icon that appears on your Macintosh desktop. 4. Double-click the MAC_Installer folder. 5. Double-click the Installer OS X icon. 6. Enter the password and click OK. 7. The Samsung Installer window opens. Click Continue. 8. Read the license agreement and click Continue. 9. Click Agree to agree to the license agreement. 10. Select Easy Install and click Install. Easy Install is recommended for most users. All components necessary for machine operations will be installed. If you select Custom Install, you can choose individual components to install. 11.When the message which warns that all applications will close on your computer appears, click Continue. 12. Select Typical installation for a network printer for a network printer and then click OK. 13. After the installation is finished, click Restart. 14. Open the Applications folder > Utilities > Print Setup Utility. • For Mac OS X 10.5 ~ 10.6, open the Applications folder > System Preferences and click Print & Fax. 15. Click Add on the Printer List. • For Mac OS X 10.5 ~ 10.6, click the “+” icon; a display window will pop up. 16. For Mac OS X 10.3, select the USB tab. • For Mac OS X10.4, click Default Browser and find the USB connection. • For Mac OS X 10.5 ~ 10.6, click Default and find the USB connection. 17. For Mac OS X 10.3, if Auto Select does not work properly, select Samsung in Printer Model and your machine name in Model Name. • For Mac OS X 10.4, if Auto Select does not work properly, select Samsung in Print Using and your machine name in Model. • For Mac OS X 10.5 ~ 10.6, if Auto Select does not work properly, select Select a driver to use... and your machine name in Print Using. Your machine appears on the Printer List, and is set as the default machine. 18. Click Add.Getting started_ 28 If the printer driver does not work properly, uninstall the driver and reinstall it. Follow steps below to uninstall the driver for Macintosh. a) Make sure that the machine is connected to your computer and powered on. b) Insert the supplied software CD into your CD-ROM drive. c) Double-click CD-ROM icon that appears on your Macintosh desktop. d) Double-click the MAC_Installer folder. e) Double-click the Installer OS X icon. f) Enter the password and click OK. g) The Samsung Installer window opens. Click Continue. h) Read the license agreement and click Continue. i) Click Agree to agree to the license agreement. j) Select Uninstall and click Uninstall. k) When the message which warns that all applications will close on your computer appears, Click Continue. l) When the uninstall is done, click Quit. Linux You need to download Linux software packages from the Samsung website to install the printer software. Follow the steps below to install the software. Installing the Unified Linux Driver 1. Make sure that the machine is connected to your computer and powered on. 2. When the Administrator Login window appears, type in root in the Login field and enter the system password. You must log in as a super user (root) to install the machine software. If you are not a super user, ask your system administrator. 3. From the Samsung website, download the Unified Linux Driver package to your computer. 4. Right-click the Unified Linux Driver package and extract the package. 5. Double-click cdroot > autorun. 6. When the welcome screen appears, click Next. 7. When the installation is complete, click Finish. The installation program added the Unified Driver Configurator desktop icon and the Unified Driver group to the system menu for your convenience. If you have any difficulties, consult the on screen help that is available through your system menu or from the driver package Windows applications, such as Unified Driver Configurator. Installing the Smart Panel 1. Make sure that the machine is connected to your computer and powered on. 2. When the Administrator Login window appears, type in root in the Login field and enter the system password. You must log in as a super user (root) to install the machine software. If you are not a super user, ask your system administrator. 3. From the Samsung website, download the Smart Panel package to your computer. 4. Right-click the Smart Panel package and extract the package. 5. Double-click cdroot > Linux > smartpanel > install.sh. Installing the Printer Settings Utility 1. Make sure that the machine is connected to your computer and powered on. 2. When the Administrator Login window appears, type in root in the Login field and enter the system password. You must log in as a super user (root) to install the machine software. If you are not a super user, ask your system administrator. 3. From the Samsung website, download the Printer Settings Utility package to your computer. 4. Right-click the Printer Settings Utility package and extract the package. 5. Double-click cdroot > Linux > psu > install.sh. If the printer driver does not work properly, uninstall the driver and reinstall it. Follow the steps below steps to uninstall the driver for Linux. a) Make sure that the machine is connected to your computer and powered on. b) When the Administrator Login window appears, type in “root” in the Login field and enter the system password. You must log in as a super user (root) to uninstall the printer driver. If you are not a super user, ask your system administrator. c) Click the icon at the bottom of the desktop. When the Terminal screen appears, type in: [root@localhost root]#cd /opt/Samsung/mfp/uninstall/ [root@localhost uninstall]#./uninstall.sh d) Click Uninstall. e) Click Next. f) Click Finish.Getting started_ 29 SHARING YOUR MACHINE LOCALLY Follow the steps below to set up computers to share your machine locally. If the Host computer is directly connected to the machine by a USB cable and is also connected to the local network environment, the client computer connected to the local network can use the shared machine through the host computer to print. 2 1 1 Host computer A computer which is directly connected to the machine by USB cable. 2 Client computers Computers which use the machine shared through the host computer. Windows Setting up a host computer 1. Install your printer driver (See "Installing USB connected machine’s driver" on page 26). 2. Click the Windows Start menu. 3. For Windows 2000, select Settings > Printers. • For Windows XP/Server 2003, select Printers and Faxes. • For Windows Server 2008/Vista, select Control Panel > Hardware and Sound > Printers. • For Windows 7, select Control Panel > Hardware and Sound > Devices and Printers. • For Windows Server 2008 R2, select Control Panel > Hardware > Devices and Printers. 4. Right-click the printer icon. 5. For Windows XP/Vista/Server 2003/Server 2008, press Properties. For Windows 7/Windows Server 2008 R2, from context menus, select the Printer properties. If Printer properties item has a ► mark, you can select other printer drivers connected with the selected printer. 6. Select the Sharing tab. If you are a Windows 7/Windows Server 2008 R2 user, check the Change Sharing Options. 7. Check the Share this printer checkbox. 8. Fill in the Share Name field. Click OK. Setting up a client computer 1. Install your printer driver (See "Installing USB connected machine’s driver" on page 26). 2. Click the Windows Start menu. 3. Select All programs > Accessories > Windows Explorer. 4. Enter the IP address of the host computer in the address bar and press Enter in your keyboard. In case host computer requires a User name and Password, fill in User ID and password of the host computer account. 5. Right-click the printer icon you want to share and select Connect. 6. If a set up complete message appears, click OK. 7. Open the file you want to print and start printing. Macintosh The following steps are for Mac OS X 10.5~10.6. Refer to Mac Help for other OS versions. Setting up a host computer 1. Install your printer driver (See "Macintosh" on page 27). 2. Open the Applications folder > System Preferences and click Print & Fax. 3. Select the printer to share in the Printers list. 4. Select Share this printer. Setting up a client computer 1. Install your printer driver (See "Macintosh" on page 27). 2. Open the Applications folder > System Preferences and click Print & Fax. 3. Click the “+” icon. A display window showing the name of your shared printer appears. 4. Select your machine and click Add. Network setup (SCX-3205W(K) only)_ 30 3.network setup (scx-3205w(k) only) This chapter gives you step-by-step instructions for setting up the network connected machine and software. This chapter includes: • Network environment • Introducing useful network programs • Using a wired network • Installing network connected machine’s driver • IPv6 Configuration NETWORK ENVIRONMENT You need to set up the network protocols on the machine to use it as your network machine. You can set up the basic network settings through the network setting programs. The following table shows the network environments supported by the machine. ITEM REQUIREMENTS Network interface • Ethernet 10/100 Base-TX • 802.11b/g/n Wireless LAN a a.Depending on your country, wireless LAN card may not be available. For some counties, only 802.11 b/g can be applied. Contact your local Samsung dealer or the retailer where you bought your machine. Network operating system • Windows 2000/Server 2003 /Server 2008/XP/Vista/7/Server 2008 R2 • Various Linux OS • Mac OS X 10.3 ~ 10.6 Network protocols • TCP/IPv4 • DHCP, BOOTP • DNS, WINS, Bonjour, SLP, UPnP • Standard TCP/IP Printing (RAW), LPR, IPP • SNMPv 1/2/3, HTTP • TCP/IPv6 (DHCP, DNS, RAW, LPR, SNMPv 1/2/3, HTTP) (See "IPv6 Configuration" on page 34.) Wireless security • Authentication: Open System, Shared Key, WPA Personal, WPA2 Personal (PSK) • Encryption: WEP64, WEP128, TKIP, AES INTRODUCING USEFUL NETWORK PROGRAMS There are several programs available to setup the network settings easily in network environment. For the network administrator especially, managing several machines on the network is possible. Before using the programs below, set the IP address first. SyncThru™ Web Service Web server embedded on your network machine, which allows you to do the following tasks. • You can configure the network parameters necessary for the machine to connect to various network environments. • You can customize machine settings (See "Using SyncThru™ Web Service (SCX-3205W(K) only)" on page 69). SyncThru™ Web Admin Service Web-based machine management solution for network administrator. SyncThru™ Web Admin Service provides you with an efficient way of managing network devices and lets you remotely monitor and troubleshoot network machines from any site with corporate internet access. • Download this program from http://solution.samsungprinter.com. SetIP This utility program allows you to select a network interface and manually configure the IP addresses for use with the TCP/IP protocol. • See "IPv4 setting using SetIP Program (Windows)" on page 31. • See "IPv4 setting using SetIP Program (Macintosh)" on page 31. • See "IPv4 setting using SetIP Program (Linux)" on page 32. TCP/IPv6 is not supported by this program. USING A WIRED NETWORK You must set up the network protocols on your machine to use it on your network. This chapter will show you how this is easily accomplished. You can use network after connecting network cable to a corresponding port on your machine. Printing a network configuration report You can print a network configuration report from the machine’s control panel that will show the current machine’s network settings. This will help you to set up a network and troubleshoot problems.Network setup (SCX-3205W(K) only)_ 31 1. Press and hold Stop/Clear button on the control panel for long enough (about four seconds) until the Status LED blinks fast. 2. Then, release the button. Using this Network Configuration Report, you can find your machine MAC address and IP address. For example: • MAC Address:00:15:99:41:A2:78 • IP Address:192.0.0.192 Setting IP address First, you have to set up an IP address for network printing and managements. In most cases a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration Protocol) server located on the network. In a few situations the IP address must be set manually. This is called a static IP and is often required in corporate Intranets for security reasons. • DHCP IP assignment: Connect your machine to the network, and wait a few minutes for the DHCP server to assign an IP address to the machine. Then, print the Network Configuration Report as explained above. If the report shows that the IP address has changed, the assignment was successful. You will see the new IP address in the report. • Static IP assignment: Use SetIP program to change the IP address from your computer. If your machine has a control panel, you can also change IP address using the machine's control panel. In an office environment, we recommend that you contact a network administrator to set IP address for you. IPv4 setting using SetIP Program (Windows) This program is for manually setting the network IP address of your machine using its MAC address to communicate with the machine. A MAC address is the hardware serial number of the network interface and can be found in the Network Configuration Report. Before using SetIP program, disable the computer firewall by performing the following steps. 1. Open Control Panel. 2. Double-click Security Center. 3. Click Windows Firewall. 4. Disable the firewall. Installing the program 1. Insert the Printer Software CD-ROM provided with your machine. When the driver CD runs automatically, close that window. 2. Start Windows Explorer and open the X drive (X represents your CD-ROM drive). 3. Double-click Application > SetIP. 4. Double-click Setup.exe to install this program. 5. Select a language, then click Next. 6. Follow the instructions in the window and complete the installation. Starting the program 1. Connect your machine to the network with a network cable. 2. Turn on the machine. 3. From the Windows Start menu, select All Programs > Samsung Printers > SetIP > SetIP. 4. Click on the icon (third from left) in the SetIP window to open the TCP/IP configuration window. 5. Enter the machine’s new information into the configuration window as follows. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding. • MAC Address: Find the machine’s MAC address from the Network Configuration Report and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8. • IP Address: Enter a new IP address for your printer. For example, if your computer’s IP address is 192.168.1.150, enter 192.168.1.X (X is number between 1 and 254 other than the computer’s address). • Subnet Mask: Enter a Subnet Mask. • Default Gateway: Enter a Default Gateway. 6. Click Apply, and then click OK. The machine will automatically print the Network Configuration Report. Confirm that all the settings are correct. 7. Click Exit to close the SetIP program. 8. If necessary, restart the computer’s firewall. IPv4 setting using SetIP Program (Macintosh) For using SetIP program, disable the computer firewall before continuing by performing the following. 1. Open System Preferences. 2. Click Security. 3. Click the Firewall menu. 4. Turn firewall off. The following instructions may vary from your model. 1. Connect your machine to the network with a network cable. 2. Insert the Installation CD-ROM, and open the disk window, select MAC_Installer > MAC_Printer > SetIP > SetIPapplet.html. 3. Double-click the file and Safari will automatically open, then select Trust. The browser will open the SetIPapplet.html page that shows the printer’s name and IP address information. 4. Click on the icon (third from left) in the SetIP window to open the TCP/IP configuration window. 5. Enter the machine’s new information into the configuration window as follows. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding. • MAC Address: Find the machine’s MAC address from the Network Configuration Report and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8. • IP Address: Enter a new IP address for your printer.Network setup (SCX-3205W(K) only)_ 32 For example, if your computer’s IP address is 192.168.1.150, enter 192.168.1.X (X is number between 1 and 254 other than the computer’s address). • Subnet Mask: Enter a Subnet Mask. • Default Gateway: Enter a Default Gateway. 6. Select Apply, then OK, and OK again. The printer will automatically print the configuration report. Confirm that all the settings are correct. Quit Safari. You may close and eject the installation CD-ROM. If necessary, restart the computer’s firewall. You have successfully changed the IP address, subnet mask, and gateway. IPv4 setting using SetIP Program (Linux) SetIP program should be automatically installed during the printer driver installation. 1. Print the machine’s network configuration report to find your machine’s MAC address. 2. Open the /opt/Samsung/mfp/share/utils/. 3. Double-click the SetIPApplet.html file. 4. Click to open the TCP/IP configuration window. 5. Enter the network card’s MAC address, IP address, subnet mask, default gateway, and then click Apply. When you enter the MAC address, enter it without a colon(:). 6. The machine prints the network information. Confirm all the settings are correct. 7. Close the SetIP program. Network parameter setting You can also set up the various network settings through the network administration programs such as SyncThru™ Web Admin Service and SyncThru™ Web Service. Restoring factory default settings You may need to reset the machine to the factory default settings when machine that you are using is connected to new network environment. Restoring factory default settings using SyncThru™ Web Service 1. Start a web browser such as Internet Explorer, Safari or Firefox and enter your machine’s new IP address in the browser window. For example: 2. Click Go to access the SyncThru™ Web Service. 3. Click Login on the upper right of the website. The Login window appears. 4. Type in the ID and Password, and then click Login. If it is your first time logging into SyncThru™ Web Service, type in the below default ID and password. • ID: admin • Password: sec00000 5. Click Settings > Network Settings. 6. Click Restore Default on the left pane of the website. 7. Click Clear. 8. Click Yes when the confirmation window appears. 9. Click OK when the success window appears. 10. Turn off and restart machine to apply settings. INSTALLING NETWORK CONNECTED MACHINE’S DRIVER Windows You can set up the machine driver, follow the steps below. This is recommended for most users. All components necessary for machine operations will be installed. 1. Make sure that the machine is connected to the network or USB and powered on. 2. Insert the supplied software CD into your CD-ROM drive. • The software CD should automatically run and an installation window appears. • If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your CD-ROM drive. Click OK. • If you use Windows Vista, Windows 7 or Windows 2008 Server R2 click Start > All programs > Accessories > Run. Type X:\Setup.exe replacing “X” with the letter which represents your CD-ROM drive and click OK. • If the AutoPlay window appears in Windows Vista, click Run Setup.exe in Install or run program field, and click Continue in the User Account Control windows. • If the AutoPlay window appears in Windows 7 or Windows 2008 Server R2, click Run Setup.exe in Install or run program field, and click Yes in the User Account Control windows. 3. Select Install Now. If necessary, select a language from the drop-down list. • For SCX-3205W(K), you can access Wireless Setting and Installation menu. The Wireless Setting and Installation allows you to install a wireless network to connect to the machine with a USB cable (See "Setting a wireless network with USB cable" on page 38). • The Advanced Installation has two options, Custom Installation and Install Software Only. The Custom Installation allows you to select the machine’s connection and choose individual component to install. The Install Software Only allows you to install the supplied software such as the Smart Panel. Follow the instruction on the window. 4. Read License Agreement, and select I accept the terms of the License Agreement. Then, click Next. The program searches for the machine. If your machine is not found in the network or locally, the error Network setup (SCX-3205W(K) only)_ 33 message appears. • Check if you want to install the software without connection of the printer. - Check this option to install this program without a machine connected. In this case, the print a test page window will be skipped, and completes the installation. • Search again When you press this button, the firewall notice window appears. - Turn off the firewall and Search again. For Windows operating system, click Start > Control Panel > Windows Firewall, and inactivate this option. - Turn off the firewall from the third party's program beside the operating system. Refer to the manual provided by individual programs. • Direct Input The Direct Input allows you to search a specific machine on the network. - Search by IP address: Enter the IP address or the host name. Then click Next. To verify your machine’s IP address, print a network configuration report (See "Printing a network configuration report" on page 30). - Search by network path: To find a shared machine (UNC Path), enter the shared name manually or find a shared printer by clicking the Browse button. Then click Next. • Help If your machine is not connected to the computer or network, this help button gives detailed information about the how to connect the machine. 5. The searched machine will be shown on the screen. Select the one you wish to use and click Next. If the driver searched only one machine, the confirmation window appears. 6. After the installation is finished, a window asking you to print a test page appears. If you want to print a test page, click Print a test page. Otherwise, just click Next and go to step 8. 7. If the test page prints out correctly, click Yes. If not, click No to reprint it. 8. If you want to register your machine on Samsung website, click On-line Registration. If your machine is not connected yet to the network, click How to connect?. How to connect? gives you the detailed information about the how to connect the machine. Follow the instructions in the window. 9. Click Finish. • After the driver setup is completed, you may enable firewall. • If your printer driver does not work properly, follow the step below to repair or reinstall the driver. a) Make sure that the machine is connected to your machine and powered on. b) From the Start menu, select Programs or All Programs > Samsung Printers > your printer driver name > Uninstall. c) Select the option as you wish, follow the instruction on the window. Macintosh 1. Make sure that the machine is connected to your network and powered on. Also, your machine’s IP address should have been set. 2. Insert the supplied software CD into your CD-ROM drive. 3. Double-click the CD-ROM icon that appears on your Macintosh desktop. 4. Double-click the MAC_Installer folder. 5. Double-click the Installer OS X icon. 6. Enter the password and click OK. 7. The Samsung Installer window opens. Click Continue. 8. Read the license agreement and click Continue. 9. Click Agree to agree to the license agreement. 10. Select Easy Install and click Install. Easy Install is recommended for most users. All components necessary for machine operations will be installed. If you select Custom Install, you can choose individual components to install. 11.When the message which warns that all applications will close on your computer appears. Click Continue. 12. Select Typical installation for a network printer for a network printer and then click OK. 13. The SetIP program automatically runs. If the machine has already configured network information, close the SetIP program. 14. Click OK to continue the installation. 15. After the installation is finished, click Restart. 16. Open the Applications folder > Utilities > Print Setup Utility. • For Mac OS X 10.5~10.6, open the Applications folder > System Preferences and click Print & Fax. 17. Click Add on the Printer List. • For Mac OS X 10.5~10.6, click the “+” icon. A display window will pop up. 18. For Mac OS X 10.3, select the IP Printing tab. • For Mac OS X 10.4, click IP Printer. • For Mac OS X 10.5~10.6, click IP. 19. Select HP Jetdirect - Socket in Protocol. When printing a document containing many pages, printing performance may be enhanced by choosing Socket for Printer Type option. 20. Enter the machine’s IP address in the Address input field.Network setup (SCX-3205W(K) only)_ 34 21. Enter the queue name in the Queue input field. If you cannot determine the queue name for your machine server, try using the default queue first. 22. For Mac OS X 10.3, if Auto Select does not work properly, select Samsung in Printer Model and your machine name in Model Name. • For Mac OS X 10.4, if Auto Select does not work properly, select Samsung in Print Using and your machine name in Model. • For Mac OS X 10.5~10.6, if Auto Select does not work properly, choose Select Printer Software and your machine name in Print Using. Your machine appears on the Printer List, and is set as the default machine. 23. Click Add. If the printer driver does not work properly, uninstall the driver and reinstall it. Follow steps below to uninstall the driver for Macintosh. a) Make sure that the machine is connected to your computer and powered on. b) Insert the supplied software CD into your CD-ROM drive. c) Double-click CD-ROM icon that appears on your Macintosh desktop. d) Double-click the MAC_Installer folder. e) Double-click the Installer OS X icon. f) Enter the password and click OK. g) The Samsung Installer window opens. Click Continue. h) Read the license agreement and click Continue. i) Click Agree to agree to the license agreement. j) Select Uninstall and click Uninstall. k) When the message which warns that all applications will close on your computer appears, click Continue. l) When the uninstall is done, click Quit. Linux Install Linux Driver and add network Printer 1. Make sure that the machine is connected to your network and powered on. Also, your machine’s IP address should have been set. 2. Download the Unified Linux Driver package from the Samsung website. 3. Extract the UnifiedLinuxDriver.tar.gz file and open the new directory. 4. Double-click the Linux folder. 5. Double-click the install.sh icon. 6. The Samsung Installer window opens. Click Continue. 7. The Add printer wizard window opens. Click Next. 8. Select Network printer and click Search button. 9. The Printer’s IP address and model name appears on list field. 10. Select your machine and click Next. 11. Input the printer description and Next 12.When the add printer is done, click Finish 13.When the install is done, click Finish Add network Printer 1. Double-click the Unified Driver Configurator. 2. Click Add Printer… 3. The Add printer wizard window opens. Click Next. 4. Select Network printer and click the Search button. 5. The printer’s IP address and model name appears on list field. 6. Select your machine and click Next. 7. Input the printer description and Next 8. When the add printer is done, click Finish. IPV6 CONFIGURATION TCP/IPv6 is supported properly only in Windows Vista or higher. If the IPv6 network seems to not be working, set all the network setting to the factory defaults and try again (See "Restoring factory default settings" on page 32). In the IPv6 network environment, follow the next procedure to use the IPv6 address. 1. Connect your machine to the network with a network cable. 2. Turn on the machine. 3. Print a Network Configuration Report from the machine’s control panel that will check IPv6 addresses (See "Printing a network configuration report" on page 30). 4. Select Start > Control Panel > Hardware and Sound > Printer > Add Printer. 5. Click Add a local printer on the Add Printer windows. 6. Follow the instruction on the window. 7. The Add Printer Wizard window appears. Follow the instruction on the window. If the machine does not work in the network environment, activate IPv6. Refer to the next section followed by. Printing a network configuration report You can print a network configuration report from the machine’s control panel that will show the current machine’s network settings. This will help you to set up a network and troubleshoot problems. 1. In ready mode, press and hold Stop/Clear button on the control panel for long enough (about four seconds) until the Status LED blinks fast. 2. Then, release the button. Using this Network Configuration Report, you can find your machine MAC address and IP address. For example: • MAC Address:00:15:99:41:A2:78 • IP Address:192.0.0.192 Setting IPv6 addresses Machine supports the following IPv6 addresses for network printing and managements. • Link-local Address: Self-configured local IPv6 address (Address starts with FE80). • Stateless Address: Automatically configured IPv6 address by a network router. • Stateful Address: IPv6 address configured by a DHCPv6 server. • Manual Address: Manually configured IPv6 address by a user.Network setup (SCX-3205W(K) only)_ 35 Manual address configuration 1. Start a web browser such as Internet Explorer that supports IPv6 addressing as a URL (See "Using SyncThru™ Web Service (SCX-3205W(K) only)" on page 69). For IPv4, enter the IPv4 address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or click Go. 2. When the SyncThru™ Web Service window opens, click Network Settings. 3. Click TCP/IPv6. 4. Enable the Manual Address In the TCP/IPv6 section. 5. Select the Address/Prefix and click the Add button, then the router prefix will automatically be entered into the address field. Enter the rest of address. (ex: 3FFE:10:88:194::AAAA. “A” is the hexadecimal 0 through 9, A through F.) 6. Click the Apply button. Installing printer driver Driver installation for network printer in IPv6 network environment is same as TCP/IPv4 (See "Installing network connected machine’s driver" on page 32). Select TCP/IP Port and when the list of machines are displayed, simply select your machine's IPv6 address. Using SyncThru™ Web Service 1. Start a web browser such as Internet Explorer that supports IPv6 addressing as a URL. 2. Select one of the IPv6 addresses (Link-local Address, Stateless Address, Stateful Address, Manual Address) from Network Configuration Report (See "Printing a network configuration report" on page 30). 3. Enter the IPv6 addresses (ex: http://[FE80::215:99FF:FE66:7701]). Address must be enclosed in '[ ]' brackets.Wireless network setup (SCX-3205W(K))_ 36 4.wireless network setup (scx-3205w(k)) This chapter gives you step-by-step instructions for setting up the wireless network connected machine and software. This chapter includes: • Setting a wireless network with the WPS button • Using a wireless network from the computer • Setting a wireless network with USB cable • Setting a wireless network with network cable • Completing the installation • Troubleshooting For more information about the network environment, network programs, and installing network connected machine’s driver, refer to the following chapters. • See "Network environment" on page 30. • See "Introducing useful network programs" on page 30. • See "Installing network connected machine’s driver" on page 32. SETTING A WIRELESS NETWORK WITH THE WPS BUTTON You can install a wireless network with the WPS ( ) button. After compleleting the wireless network connection, you need to install a machine driver to print from an application (See "Installing network connected machine’s driver" on page 32). Setting a wireless network with the WPS button If your machine and an access point (or wireless router) support Wi-Fi Protected Setup™(WPS), you can easily configure the wireless network settings by pressing the WPS ( ) button on the control panel. If you want to use the wireless network using the infrastructure mode, make sure that the network cable is disconnected from the machine. Using the WPS (PBC) button or entering the PIN number from the computer to connect to the Access Point varies depending on the access point (or wireless router) you are using. Refer to the user's guide of the access point (or wireless router) you are using. Items to prepare You need to ensure you have the following items ready to use: • Check if the access point (or wireless router) supports Wi-Fi Protected Setup™ (WPS). • Check if your machine supports Wi-Fi Protected Setup™ (WPS). • Networked computer (PIN mode only) Refer to your network administrator, or the person that set up your wireless network, for information about your network configuration. Choosing your network connection There are two methods to connect your machine to a wireless network using the WPS ( ) button on the control panel. The Push Button Configuration (PBC) method allows you to connect your machine to a wireless network by pressing both the WPS ( ) button on the control panel of your machine and the WPS (PBC) button on a Wi-Fi Protected Setup™(WPS)-enabled access point (or wireless router) respectively. The Personal Identification Number (PIN) method helps you connect your machine to a wireless network by entering the supplied PIN information on a Wi-Fi Protected Setup™(WPS)-enabled access point (or wireless router). Factory default in your machine is PBC mode, which is recommended for a typical wireless network environment. Connecting to a wireless network in PBC mode To connect your machine to the wireless network in PBC mode, follow the following steps: You need to check the status of the wireless LED. 1. Press and hold the WPS ( ) button on the control panel for about 2 - 4 seconds until the status LED blinks quickly. • : The light blinks slowly on wireless LED. The machine starts connecting to the wireless network. The LED blinks slowly for up to two minutes until you press the PBC button on access point (or wireless router). 2. : Press the WPS (PBC) button on the access point (or wireless router). The wireless LED blinks in the order below: a) : The light blinks fast on the wireless LED. The machine is connecting to the access point (or wireless router). b) : When the machine is successfully connected to the wireless network, the wireless LED light stays on. Connecting to the wireless network in PIN mode To connect your machine to the wireless network, follow the following steps: You need to check the status of the wireless LED. 1. The network configuration report including PIN number must be printed. In ready mode, press and hold the Stop/Clear button on the control panel for about 5 seconds. You can find your machine’s PIN number. 2. Press and hold the WPS ( ) button on the control panel for more than 4 seconds until the status LED on. • : The light blinks slowly on the wireless LED. The machine starts connecting to access point (or wireless router). 3. You need to enter eight-digit PIN number within two minutes to the computer which is connected to the access point (or wireless router). The LED blinks slowly for up to two minutes until you enter the eight-digit PIN number The wireless LED blinks in the order below: a) : The light blinks fast on the wireless LED. The machine is Wireless network setup (SCX-3205W(K))_ 37 connecting to the access point (or wireless router). b) : When the machine is successfully connected to the wireless network, the wireless LED light stays on. Re-connecting to the wireless network When the wireless function is off, the machine automatically tries to re-connect to the access point (or wireless router) with the previously used wireless connection settings and address. In the following cases, the machine automatically re-connects to the wireless network: • The machine is turned off and on again. • The access point (or wireless router) is turned off and on again. Canceling a wireless network connection process To cancel the wireless network connection function when the machine is connecting to the wireless network, press and release the Stop/Clear button on the control panel. You need to wait 2 minuites to re-connect the wireless network. Disconnecting a wireless network connection To disconnect the wireless network connection, press the WPS ( ) button on the control panel for more than two seconds. • When the Wi-Fi Network is in idle mode: The machine is immediately disconnected from the wireless network, and the wireless LED is off. • When the Wi-Fi Network is being used: While the machine waits until the current job is finished, the light blinks fast on the wireless LED. Then, the wireless network connection is automatically disconnected. The wireless LED is off. When the Wi-Fi Network is disconnected, press the WPS ( ) button on the control panel. The Wi-Fi network is on and the setting a wireless network begins. USING A WIRELESS NETWORK FROM THE COMPUTER Choosing your network connection Typically, you can only have one connection between your computer and the machine at a time. There are types of network connections to consider. • Wireless network without access point (Ad-Hoc mode) • Wireless network with an access point (Infrastructure mode) How to print a network configuration report You can identify the network settings of your machine by printing a network configuration report. To print the report: 1. In ready mode, press and hold Stop/Clear button on the control panel for long enough (about four seconds) until the Status LED blinks fast. 2. Then, release the button. Using this Network Configuration Report, you can find your machine MAC address and IP address. For example: • MAC Address:00:15:99:41:A2:78 • IP Address:192.0.0.192 IP addresses Every device in a network has a unique numerical address called an IP Address. Your machine came with a Default IP address of 192.0.0.192, which you can verify by printing out a Network Configuration Report or Configuration Report. • DHCP IP assignment: Connect your machine to the network, and wait a few minutes for the DHCP server to assign an IP address to the machine. Then, print the Network Configuration Report as explained above. If the report shows that the IP address has changed, the assignment was successful. You will see the new IP address in the report. • Static IP assignment: Use the SetIP program to change the IP address from your computer (See "Setting IP address" on page 31). In an office environment, we recommend that you contact a network administrator to set this address for you. Wireless network name and network key Wireless networks require higher security, so when an access point is first set up, a network name (SSID), the type of security used, and a Network Key are created for the network. Locate this information before proceeding with the machine installation. Infrastructure mode This is an environment generally used for homes and SOHOs. This mode uses an access point to communicate with the wireless machine. • See "Installing the machine on a wireless network with an access point (Windows)" on page 38. • See "Installing the machine on a wireless network with an access point (Macintosh)" on page 40. Ad-Hoc mode This mode does not use an access point. The wireless computer and wireless machine communicates directly. • See "Installing the machine on an Ad-Hoc wireless network (Windows)" on page 39. • See "Installing the machine on an Ad-Hoc wireless network (Macintosh)" on page 41. After choosing your configuration, follow the simple directions for your computer operating system, but first locate the software CD supplied with the machine before proceeding. Installing a wireless network with cables You can install a wireless network to connect to the machine with either a USB cable or a network cable. For most users, we recommend using a USB cable with the program provided in the supplied software CD. The following are two ways to install a wireless network with cables. • With a USB cable: You can simply set up a wireless network using the program in the supplied software CD. Only Windows and Macintosh operating system are supported (See "Setting a wireless network with USB cable" on page 38). You can also install a wireless network in Printer Settings Utility with USB cable after installing driver. (Windows and Macintosh operating system are supported.) • With a network cable: You can set up a wireless network using the SyncThru™ Web Service program (See "Setting a wireless network withWireless network setup (SCX-3205W(K))_ 38 network cable" on page 42). SETTING A WIRELESS NETWORK WITH USB CABLE Refer to your network administrator, or the person that set up your wireless network, for information about your network configuration. Installing the machine on a wireless network with an access point (Windows) Items to prepare Ensure you have next items ready. • Access point • Network-connected computer • Software CD that provided with your machine • The machine installed with a wireless interface • USB cable Creating the infrastructure network in Windows When the items are ready, follow below steps: 1. Check whether the USB cable is connected to the machine. 2. Turn on your computer, access point and machine. 3. Insert the supplied software CD into your CD-ROM drive. • The software CD should automatically run and an installation window appears. • If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your CD-ROM drive. Click OK. • If you use Windows Vista, Windows 7 or Windows Server 2008 R2 click Start > All programs > Accessories > Run. Type X:\Setup.exe replacing “X” with the letter which represents your CD-ROM and click OK. • If the AutoPlay window appears in Windows Vista, Windows 7 or Windows Server 2008 R2, click Run Setup.exe in Install or run program field, and click Continue or Yes in the User Account Control windows. 4. Select the Wireless Setting and Installation option. • Install Now: First you must configure the wireless network settings of your printer to print through wireless. • Wireless Setting and Installation: Configure the wireless network settings of your printer with a USB cable then install the printer driver. Press this button to set up the wireless connection if you have not set up the wireless connection before. 5. Read License Agreement, and select I accept the terms of the License Agreement. Then, click Next. 6. The software searches the wireless network. If the searching has failed, you may check if the USB cable is connected between the computer and machine properly, and follow the instruction on the window. 7. After searching, the window shows the wireless network devices. Select the name (SSID) of access point you are using and click Next. If you cannot find out the network name you want to choose, or if you want to set the wireless configuration manually, click Advanced Setting. • Enter the wireless Network Name: Type the SSID of access point you want (SSID is case-sensitive). • Operation Mode: Select Infrastructure. • Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network. WPA Personal or WPA2 Personal: Select this option to authenticate the print server based on WPA Pre-Shared Key. This uses a shared secret key (generally called Pre Shared Key pass phrase) which is manually configured on the access point and each of its clients. • Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES, TKIP AES) • Network Key: Enter the encryption network key value. • Confirm Network Key: Confirm the encryption network key value. • WEP Key Index: If you are using the WEP Encryption, select the appropriate WEP Key Index. The wireless network security window does appear when the access point has security setting. The wireless network security window appears. The window may differ according to its security mode, WEP or WPA. • In case of WEP Select Open System or Shared Key for the authentication and enter WEP security key. Click Next. WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key. • In case of WPA Enter the WPA shared key and click Next. WPA authorizes and identifies users based on a secret key that changes automatically at regular intervals. WPA also uses TKIP (Temporal Key Integrity Protocol) and AES (Advanced Encryption Standard) for data encryption. 8. The window shows the wireless network setting and check if settings are right. Click Next. • For the DHCP method If the IP address assignment method is DHCP, check if DHCP is shown in the window. However, if it shows Static, click Change Wireless network setup (SCX-3205W(K))_ 39 TCP/IP to change the assignment method to DHCP. • For the Static method If the IP address assignment method is Static, check if Static is shown in the window. However, if it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. Before entering the IP address for the machine, you must know the computer’s network configuration information. If the computer is set to DHCP, you must contact the network administrator to get the static IP address. Example) If computer’s network information is as below: - IP address: 169.254.133.42 - Subnet Mask: 255.255.0.0 Machine’s network information should be as below: - IP address: 169.254.133. 43 (Use computer’s IP address, with changed last three digits.) - Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.) - Gateway: 169.254.133.1 (Change the last three digits from IP address of your machine to 1.) 9. When the wireless network setting is completed, disconnect the USB cable between the computer and machine. Click Next. 10. Wireless Network Setting Complete window appears. Then, click Next. Select Yes if you accept the current settings and continue the setup procedure. Select No if you want to return to the beginning screen. Then, click Next. 11. Click Next when the Confirm Printer Connection window appears. 12. Select the components to be installed. Click Next. After selecting the components, you can also change the machine name, set the machine to be shared on the network, set the machine as the default machine, and change the port name of each machine. Click Next. 13. After the installation is finished, a window asking you to print a test page appears. If you want to print a test page, click Print a test page. Otherwise, just click Next and skip to step 15. 14. If the test page prints out correctly, click Yes. If not, click No to reprint it. 15. To register as a user of the machine in order to receive information from Samsung, click On-line Registration. 16. Click Finish. Installing the machine on an Ad-Hoc wireless network (Windows) If you do not have an access point (AP), you may still connect the machine wirelessly to your computer by setting up an Ad-Hoc wireless network by following the simple steps below. Items to prepare Ensure you have next items ready. • Wireless network computer • Software CD provided with your machine • Wireless network machine • USB cable Creating the Ad-Hoc network in Windows When the items are ready, follow below steps: 1. Check whether the USB cable is connected to the machine. 2. Turn on your computer and the wireless network machine. 3. Insert the supplied software CD into your CD-ROM drive. • The software CD should automatically run and an installation window appear. • If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive. Click OK. • If you use Windows Vista, Windows 7 or Windows Server 2008 R2 click Start > All programs > Accessories > Run. Type X:\Setup.exe replacing “X” with the letter which represents your drive and click OK. • If the AutoPlay window appears in Windows Vista, Windows 7 or Windows Server 2008 R2, click Run Setup.exe in Install or run program field, and click Continue or Yes in the User Account Control windows. 4. Select the Wireless Setting and Installation option. • Install Now: First you must configure the wireless network settings of your printer to print through wireless. • Wireless Setting and Installation: Configure the wireless network settings of your printer with a USB cable then install the printer driver. Press this button to set up the wireless connection if you have not set up the wireless connection before. 5. Read the License Agreement, and select I accept the terms of the License Agreement. Then, click Next. 6. The software searches the wireless network. If the software has failed to search the network, check if the USB cable is connected properly between the computer and machine, and follow the instruction on the window. 7. After searching the wireless network, a list of wireless network your machine has searched appears. If you want to use the Samsung default ad-hoc setting, select the last wireless network on the list, which Network Name(SSID) is airportthru and Signal is Printer Self Network. Then, click Next. If you want to use other ad-hoc settings, select other wireless network from the list. If you want to change ad-hoc settings click the Advanced Setting button. • Enter the wireless Network Name: Type in the SSID Wireless network setup (SCX-3205W(K))_ 40 name you want (SSID is case-sensitive). • Operation Mode: Select Ad-hoc. • Channel: Select the channel. • Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network. • Encryption: Select the encryption. (None, WEP64, WEP128) • Network Key: Enter the encryption network key value. • Confirm Network Key: Confirm the encryption network key value. • WEP Key Index: If you are using the WEP Encryption, select the appropriate WEP Key Index. The wireless network security window appears when the ad-hoc network has security setting. The wireless network security window appears. Select Open System or Shared Key for the authentication and click Next. • WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key. 8. The window which shows the wireless network setting appears. Check the settings and click Next. Before entering the IP address for the machine, you must know the computer’s network configuration information. If the computer’s network configuration is set to DHCP, the wireless network setting should also be DHCP. Likewise, if the computer’s network configuration is set to Static, the wireless network setting should also be Static. If your computer is set to DHCP and you want to use Static wireless network setting, you must contact the network administrator to get the static IP address. • For the DHCP method If the IP address assignment method is DHCP, check if DHCP is shown in the Wireless Network Setting Confirm window. However, if it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP). • For the Static method If the IP address assignment method is Static, check if Static is shown in the Wireless Network Setting Confirm window. However, if it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. Example) If computer’s network information is as below: - IP address: 169.254.133.42 - Subnet Mask: 255.255.0.0 Machine’s network information should be as below: - IP address: 169.254.133. 43 (Use computer’s IP address, with changed last three digits.) - Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.) - Gateway: 169.254.133.1 (Change the last three digits from IP address of your machine to 1.) 9. When the wireless network setting is completed, disconnect the USB cable between the computer and machine. Click Next. If the Change PC Network Setting window appears, follow the steps on the window. Click Next if you are finished the computer’s wireless network settings. If you set the computer’s wireless network as DHCP, it will take several minutes to receive the IP address. 10. The Wireless Network Setting Complete window appears. Select Yes if you accept the current settings and continue the setup procedure. Select No if you want to return to the beginning screen. Then, click Next. 11. Click Next when the Confirm Printer Connection window appears. 12. Select the components to be installed. Click Next. After selecting the components, you can also change the machine name, set the machine to be shared on the network, set the machine as the default machine and change the port name of each machine. Click Next. 13. After the installation is finished, a window asking you to print a test page appears. If you want to print a test page, click Print a test page. Otherwise, just click Next and skip to step 15. 14. If the test page prints out correctly, click Yes. If not, click No to reprint it. 15. To register as a user of the machine in order to receive information from Samsung, click On-line Registration. 16. Click Finish. Installing the machine on a wireless network with an access point (Macintosh) Items to prepare Ensure you have next items ready. • Access point • Network-connected computer • Software CD that provided with your machine • The machine installed with a wireless network interface • USB cable Creating the infrastructure network in Macintosh When the items are ready, follow below steps: 1. Check whether the USB cable is connected to the machine. 2. Turn on your computer, access point and machine. 3. Insert the supplied software CD into your CD-ROM drive. 4. Double-click the CD-ROM icon that appears on your Macintosh desktop. 5. Double-click the MAC_Installer folder. 6. Double-click the Installer OS X icon. 7. Enter the password and click OK. 8. The Samsung Installer window opens. Click Continue. 9. Read the license agreement and click Continue. 10. Click Agree to agree to the license agreement. 11. Select Easy Install and click Install.Wireless network setup (SCX-3205W(K))_ 41 Easy Install is recommended for most users. All components necessary for machine operations will be installed. If you select Custom Install, you can choose individual operations will be installed. 12. Select the Wireless Setting and Installation option. 13. The software searches the wireless network. If the searching has failed, you may check if the USB cable is connected between the computer and machine properly, and follow the instruction on the window. 14. After searching, the window shows the wireless network devices. Select the name (SSID) of access point you are using and click Next. When you set the wireless configuration manually, click Advanced Setting. • Enter the wireless Network Name: Type the SSID of access point you want (SSID is case-sensitive). • Operation Mode: Select Infrastructure. • Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network. WPA Personal or WPA2 Personal: Select this option to authenticate the print server based on WPA Pre-Shared Key. This uses a shared secret key (generally called Pre Shared Key pass phrase) which is manually configured on the access point and each of its clients. • Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES, TKIP AES) • Network Key: Enter the encryption network key value. • Confirm Network Key: Confirm the encryption network key value. • WEP Key Index: If you are using the WEP Encryption, select the appropriate WEP Key Index. The wireless network security window does appear when the access point has security setting. The wireless network security window appears. The window may differ according to its security mode, WEP or WPA. • In case of WEP Select Open System or Shared Key for the authentication and enter WEP security key. Click Next. WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key. • In case of WPA Enter the WPA shared key and click Next. WPA authorizes and identifies users based on a secret key that changes automatically at regular intervals. WPA also uses TKIP (Temporal Key Integrity Protocol) and AES (Advanced Encryption Standard) for data encryption. 15. The window shows the wireless network setting and check if settings are right. Click Next. • For the DHCP method If the IP address assignment method is DHCP, check if DHCP is shown in the window. However, if it shows Static, click Change TCP/IP to change the assignment method to DHCP. • For the Static method If the IP address assignment method is Static, check if Static is shown in the window. However, if it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. Before entering the IP address for the machine, you must know the computer’s network configuration information. If the computer is set to DHCP, you must contact the network administrator to get the static IP address. Example) If computer’s network information is as below: - IP address: 169.254.133.42 - Subnet Mask: 255.255.0.0 Machine’s network information should be as below: - IP address: 169.254.133. 43 (Use computer’s IP address, with changed last three digits.) - Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.) - Gateway: 169.254.133.1 (Change the last three digits from IP address of your machine to 1.) 16. The wireless network is connecting according to the network configuration. 17.When the wireless network setting is completed, disconnect the USB cable between the computer and machine. 18. After the installation is finished, click Restart. Installing the machine on an Ad-Hoc wireless network (Macintosh) If you do not have a access point (AP), you may still connect the machine wirelessly to your computer by setting up an Ad-Hoc wireless network by following these simple directions. Items to prepare Ensure you have next items ready. • Wireless network-connected computer • Software CD that provided with your machine • The machine installed with a wireless network interface • USB cable Creating the Ad-Hoc network in Macintosh When the items are ready, follow below steps: 1. Check whether the USB cable is connected to the machine. 2. Turn on your computer and machine. 3. Insert the supplied software CD into your CD-ROM drive. 4. Double-click the CD-ROM icon that appears on your Macintosh desktop. 5. Double-click the MAC_Installer folder. 6. Double-click the Installer OS X icon. 7. Enter the password and click OK. 8. The Samsung Installer window opens. Click Continue. 9. Read the license agreement and click Continue. 10. Click Agree to agree to the license agreement. 11. Select Easy Install and click Install. Easy Install is recommended for most users. All components necessary for machine operations will be installed. If you select Custom Install, you can choose individual operations will be Wireless network setup (SCX-3205W(K))_ 42 installed. 12. Click Wireless Setting and Installation. 13. The software searches the wireless network devices. If the searching has failed, you may check if the USB cable is connected between the computer and machine properly, and follow the instruction on the window. 14. After searching the wireless network, a list of wireless network your machine has searched appears. If you want to use the Samsung default ad-hoc setting, select the last wireless network on the list, which Network Name(SSID) is airportthru and Signal is Printer Self Network. Then, click Next. If you want to use other ad-hoc settings, select other wireless network from the list. If you want to change ad-hoc settings click the Advanced Setting button. • Enter the wireless Network Name: Type in the SSID name you want (SSID is case-sensitive). • Operation Mode: Select Ad-hoc. • Channel: Select the channel. • Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network. • Encryption: Select the encryption. (None, WEP64, WEP128) • Network Key: Enter the encryption network key value. • Confirm Network Key: Confirm the encryption network key value. • WEP Key Index: If you are using the WEP Encryption, select the appropriate WEP Key Index. The wireless network security window appears when the ad-hoc network has security setting. The wireless network security window appears. Select Open System or Shared Key for the authentication and click Next. • WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key. 15. The window which shows the wireless network setting appears. Check the settings and click Next. Before entering the IP address for the machine, you must know the computer’s network configuration information. If the computer’s network configuration is set to DHCP, the wireless network setting should also be DHCP. Likewise, if the computer’s network configuration is set to Static, the wireless network setting should also be Static. If your computer is set to DHCP and you want to use Static wireless network setting, you must contact the network administrator to get the static IP address. • For the DHCP method If the IP address assignment method is DHCP, check if DHCP is shown in the Wireless Network Setting Confirm window. However, if it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP). • For the Static method If the IP address assignment method is Static, check if Static is shown in the Wireless Network Setting Confirm window. However, if it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. Example) If computer’s network information is as below: - IP address: 169.254.133.42 - Subnet Mask: 255.255.0.0 Machine’s network information should be as below: - IP address: 169.254.133. 43 (Use computer’s IP address, with changed last three digits.) - Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.) - Gateway: 169.254.133.1 (Change the last three digits from IP address of your machine to 1.) 16. The wireless network is connecting according to the network configuration. 17.When the wireless network setting is completed, disconnect the USB cable between the computer and machine. 18. After the installation is finished, click Restart. SETTING A WIRELESS NETWORK WITH NETWORK CABLE Your machine is a network compatible machine. To enable your machine to work with your network you will need to perform some configuration procedures. Refer to your network administrator, or the person that set up your wireless network, for information about your network configuration. Preparing items Ensure you have next items ready. • Access point • Network-connected computer • Software CD that provided with your machine • The machine installed with a wireless network interface • Network cable Setting IP address Firstly, you have to set up an IP address for network printing and managements. In most cases a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration Protocol) server located on the network. In a few situations the IP address must be set manually. This is called a static IP and is often required in corporate Intranets for security reasons. • DHCP IP assignment: Connect your machine to the network, and wait a few minutes for the DHCP server to assign an IP address to the machine. Then, print the Network Configuration Report as explained above. If the report shows that the IP address has changed, the assignment was successful. You will see the new IP address in the report (See "How to print a network configuration report" on page 37). • Static IP assignment: Use SetIP program to change the IP address Wireless network setup (SCX-3205W(K))_ 43 from your computer. In an office environment, we recommend that you contact a network administrator to set this address for you. IP setting using SetIP Program (Windows) This program is for manually setting the network IP address of your machine using its MAC address to communicate with the machine. A MAC address is the hardware serial number of the network interface and can be found in the Network Configuration Report. For using SetIP program, disable the computer firewall before continuing by performing the following: 1. Open Start > All programs > Control Panel. 2. Double-click Security Center. 3. Click Windows Firewall. 4. Disable the firewall. Installing the program 1. Insert the Printer Software CD-ROM provided with your machine. When the driver CD runs automatically, close that window. 2. Start Windows Explorer and open the X drive. (X represents your CD-ROM drive.) 3. Double-click Application > SetIP. 4. Double-click Setup.exe to install this program. 5. Click OK. If necessary, select a language from the drop-down list. 6. Follow the instructions in the window and complete the installation. Starting the program 1. Connect your machine to the network with a network cable. 2. Turned on the machine. 3. From the Windows Start menu, select All Programs > Samsung Printers > SetIP > SetIP. 4. Click on the icon (third from left) in the SetIP window to open the TCP/IP configuration window. 5. Enter the machine’s new information into the configuration window as follows. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding. • MAC Address: Find the machine’s MAC address from the Network Configuration Report and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8. • IP Address: Enter a new IP address for your printer. For example, if your computer’s IP address is 192.168.1.150, enter 192.168.1.X. (X is number between 1 and 254 other than the computer’s address.) • Subnet Mask: Enter a Subnet Mask. • Default Gateway: Enter a Default Gateway. 6. Click Apply, and then click OK. The machine will automatically print the Network Configuration Report. Confirm that all the settings are correct. 7. Click Exit to close the SetIP program. 8. If necessary, restart the computer’s firewall. IP setting using SetIP Program (Macintosh) For using SetIP program, disable the computer firewall before continuing by performing the following: The path and UIs may differ by Mac OS version. Refer to the Mac OS manual. 1. Open System Preferences. 2. Click Security. 3. Click the Firewall menu. 4. Turn firewall off. The following instructions may vary for your model. 1. Connect your machine to the network with a network cable. 2. Insert the Installation CD-ROM, and open the disk window, select MAC_Installer > MAC_Printer > SetIP > SetIPApplet.html. 3. Double-click the file and Safari will automatically open, then select Trust. The browser will open the SetIPApplet.html page that shows the printer’s name and IP address information. 4. Click on the icon (third from left) in the SetIP window to open the TCP/IP configuration window. 5. Enter the machine’s new information into the configuration window as follows. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding. • MAC Address: Find the machine’s MAC address from the Network Configuration Report and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8. • IP Address: Enter a new IP address for your printer. For example, if your computer’s IP address is 192.168.1.150, enter 192.168.1.X. (X is number between 1 and 254 other than the computer’s address.) • Subnet Mask: Enter a Subnet Mask. • Default Gateway: Enter a Default Gateway. 6. Select Apply, then OK, and OK again. The printer will automatically print the configuration report. Confirm that all the settings are correct. Quit Safari. You may close and eject the installation CD-ROM. If necessary, restart the computer’s firewall. You have successfully changed the IP address, subnet mask, and gateway. Configuring the machine’s wireless network Before starting you will need to know the network name(SSID) of your wireless network and the network key if it is encrypted. This information was set when the access point (or wireless router) was installed. If you do not know about your wireless environment, please ask the person who has set up your network. To configure wireless parameters, you can use SyncThru™ Web Service. Using SyncThru™ Web Service Before starting wireless parameter configuration, make sure cable connection status. Wireless network setup (SCX-3205W(K))_ 44 1. Check whether the network cable is connected to the machine. If not, connect the machine with a standard network cable. 2. Start a web browser such as Internet Explorer, Safari or Firefox and enter your machine’s new IP address in the browser window. For example, 3. Click Login on the upper right of the SyncThru™ Web Service website. The Login window appears. 4. Type in the ID and Password then click Login. If it’s your first time logging into SyncThru™ Web Service, type in the below default ID and password. • ID: admin • Password: sec00000 5. When the SyncThru™ Web Service window opens, click Network Settings. 6. Click Wireless > Wizard. Wizard will help you setup the wireless network configuration. However, if you want to set the wireless network directly, select Custom. 7. Select the one Network Name(SSID) in the list. • SSID: SSID (Service Set Identifier) is a name that identifies a wireless network. access points and wireless devices attempting to connect to a specific wireless network must use the same SSID. The SSID is case-sensitive. • Operation Mode: Operation Mode refers to the type of wireless connections (See "Wireless network name and network key" on page 37). - Ad-hoc: Allows wireless devices to communicate directly with each other in a peer-to-peer environment. - Infrastructure: Allows wireless devices to communicate with each other through an access point. If your network’s Operation Mode is Infrastructure, select the SSID of the access point. If the Operation Mode is Ad-hoc, select the machine’s SSID. Note that “airportthru” is the default SSID of your machine. 8. Click Next. If wireless security setting window appears, enter the registered password (network key) and click Next. 9. The confirmation window appears, please check your wireless setup. If the setup is right, click Apply. Disconnect the network cable (standard or network). Your machine should then start communicating wirelessly with the network. In case of Ad-hoc mode, you can use a wireless LAN and wired LAN simultaneously. COMPLETING THE INSTALLATION After you have installed your Samsung wireless network printer, print another copy of the Network Configuration Report and keep it for future reference. You are now ready to use your new Samsung wireless printer on your network. TROUBLESHOOTING Solve problems that might occur during wireless setting and installing the machine driver. Wireless network problems If problems occur while using the machine on a network, check the followings. Printers Not Found • Your machine may not be turned on. Turn on your computer and the machine. • USB cable is not connected between your computer and machine. Connect machine to your computer using the USB cable. • The machine does not support wireless network. Check the machine's user's guide included on the software CD supplied with your machine and prepare a wireless network machine. Connecting Failure - Not found SSID • The machine is unable to search network name (SSID) which you have selected or typed in. Check the network name (SSID) on your access point and try connecting again. • Your access point is not turned on. Turn on your access point. Connecting Failure - Invalid Security • You configured security incorrectly. Check the configured security on your access point and machine. Connecting Failure - General Connection Error • Your computer is not receiving a signal form your machine. Check the USB cable and your machine power. • When Temporal Key Integrity Protocol(TKIP) security is set up for the access point, connection might fail. Change the access point settings. Connecting Failure - Connected Wired Network • Your machine is connected with wired network cable. Remove the wired network cable from your machine. PC Connection Error • The configured network address is unable to connect between your computer and machine. - For DHCP network environment The print receives the IP address automatically (DHCP) when computer is configured to DHCP. - For Static network environment The machine uses the static address when computer is configured to static address. If you computer has following addresses, - IP address: 192.168.1.100 - Subnet address: 255.255.255.0 - Gateway address: 192.168.1.1 Type in the following address for your machine, - IP address: 192.168.1.101 - Subnet address: 255.255.255.0 - Gateway address: 192.168.1.1Wireless network setup (SCX-3205W(K))_ 45 Solving other problems If problems occur while using the machine on a network, check the followings. For information on access point (or wireless router), refer to its own user's guide. • Your computer, access point or machine may not be turned on. • Check the wireless reception around the machine. If the reception is far from the machine or there is an obstacle, you might have difficulty receiving the signal. • Cycle the power for access point (or wireless router), machine and computer. Sometimes cycling the power can recover network communication. • Check whether firewall software (V3 or Norton) is blocking the communication. If the computer and the machine is connected on a same network it cannot be searched, firewall software might be blocking the communication. Refer to the user's guide for the software to turn it off and try searching the machine again. • Check whether the machine's IP address is allocated correctly. You can check the IP address by printing the network configuration report. • Check whether access point (or wireless router) has a configured security (password). If it has a password, refer to the access point (or wireless router) administrator. • Check whether the machine's IP address. Reinstall the machine driver and change the settings to connect to the machine on the network. Due to the characteristics of DHCP, the allocated IP address could change if the machine is not used for a long time or if the access point has been reset. • Check the wireless environment. You might not be able to connect to the network in the infrastructure environment where you need to type in a user's information before connecting to access point (or wireless router). • This machine only supports IEEE 802.11 b/g/n and Wi-Fi. For some counties, only 802.11 b/g can be applied. Other wireless communication (Bluetooth) is not supported. • When using the Ad-hoc mode, for operating systems such as Windows Vista, you might need to set the wireless connection setting every time you use the wireless machine. • You cannot use infrastructure mode and Ad-hoc mode at the same time for Samsung wireless network machine. • The machine is within the range of the wireless network. For most networks, the machine should be within 30 meters (100 feet) of the wireless access point (or wireless router). • The machine is located away from obstacles that could block the wireless signal. Remove any large metal objects between the access point (or wireless router) and the machine. Make sure the machine and wireless access point (or wireless router) are not separated by poles, walls, or support columns containing metal or concrete. • The machine is located away from other electronic devices that may interfere with the wireless signal. Many devices can interfere with the wireless signal, including baby monitors, motors, cordless phones, security system cameras, other wireless networks, and some Bluetooth devices.Basic setup_ 46 5.basic setup After installation is complete, you may want to set the machine’s default settings. Refer to the next section if you would like to set or change values. This chapter gives you step-by-step instructions for setting up the machine. This chapter includes: • Altitude adjustment • Setting the default tray and paper • Using the power saving feature • Changing font setting ALTITUDE ADJUSTMENT The print quality is affected by atmospheric pressure, which is determined by the height of the machine above sea level. The following information will guide you on how to set your machine to the best print quality or best quality of print. Before you set the altitude value, determine the altitude where you are. 0 4,000 m (13,123 ft) 3,000 m (9,842 ft) 2,000 m (6,561 ft) 1,000 m (3,280 ft) 4 3 2 1 1 High 1 2 High 2 3 High 3 4 Normal You can altitude adjustment in Printer Settings Utility. 1. Double-click the Smart Panel icon on the Windows task bar (or Notification Area in Linux). You can also click Smart Panel on the status bar in Mac OS X (See "Using the Smart Panel program" on page 70). Or, if you are a Windows user, you can launch it from the Start menu, select Programs or All Programs > Samsung Printers > your printer driver name > Smart Panel. 2. Click Printer Setting. 3. Click Setting > Altitude Adjustment. Select necessary options from the drop-down list. 4. Click the Apply button. If your machine is connected to a network, SyncThru™ Web Service screen appears automatically. This can be also adjusted via SyncThru™ Web Service. SETTING THE DEFAULT TRAY AND PAPER You can select the tray and paper you would like to keep using for printing job. From your computer Windows 1. Click the Windows Start menu. 2. For Windows 2000, select Settings > Printers. • For Windows XP/Server 2003, select Printer and Faxes. • For Windows Server 2008/Vista, select Control Panel > Hardware and Sound > Printers. • For Windows 7, select Control Panel > Hardware and Sound > Devices and Printers. • For Windows Server 2008 R2, select Control Panel > Hardware > Devices and Printers. 3. Right-click on your machine. 4. For Windows XP/Server 2003/Server 2008/Vista, press Printing Preferences. For Windows 7/Windows Server 2008 R2, from context menus, select the Printing Preferences. If Printing Preferences item has a ► mark, you can select other printer drivers connected with the selected printer. 5. Click Paper tab. 6. Select tray and its options, such as paper size and type. 7. Press OK. If you want to use special-sized paper such as a billing paper, select Edit... in the Paper tab in the Printing Preferences (See "Opening printing preferences" on page 55). Macintosh Macintosh does not support this function. Macintosh users need to change the default setting manually each time they want to print using other settings. 1. Open a Macintosh application and select the file you want to print. 2. Open the File menu and click Print. 3. Go to Paper Feed pane. 4. Set appropriate tray from which you want to print. 5. Go to Paper pane. 6. Set paper type to correspond to the paper loaded in the tray from which you want to print. 7. Click Print to print. Linux 1. Open Terminal Program. 2. When the Terminal screen appears, type in the following: [root@localhost root]# lpr Basic setup_ 47 3. Select Printer and click Properties… 4. Click on the Advanced tab. 5. Select the tray (source) and its options, such as paper size and type. 6. Press OK. USING THE POWER SAVING FEATURE When you will not be using the machine for a while, you can use this feature to save power. You change power save in Printer Settings Utility. 1. Double-click the Smart Panel icon on the Windows task bar (or Notification Area in Linux). You can also click Smart Panel on the status bar in Mac OS X. Or, if you are a Windows user, you can launch it from the Start menu, select Programs or All Programs > Samsung Printers > your printer driver name > Smart Panel. 2. Click Printer Setting. 3. Click Setting > Power Save. Select the appropriate value from the drop-down list, and then click Apply. CHANGING FONT SETTING Your machine has preset font setting depending on your region or country. If you want to change the font or set the font for special condition, such as the DOS environment, you can change the font setting as follows: 1. Double-click the Smart Panel icon on the Windows task bar (or Notification Area in Linux). You can also click Smart Panel on the status bar in Mac OS X. Or, if you are a Windows user, you can launch it from the Start menu, select Programs or All Programs > Samsung Printers > your printer driver name > Smart Panel. 2. Click Printer Setting. 3. Click Emulation. 4. Confirm if PCL is selected in Emulation Setting. 5. Click Setting. 6. Select your preferred font in the Symbol set list. 7. Click Apply. Following information shows the proper font list for corresponding languages. • Russian: CP866, ISO 8859/5 Latin Cyrillic • Hebrew: Hebrew 15Q, Hebrew-8, Hebrew-7 (Israel only) • Greek: ISO 8859/7 Latin Greek, PC-8 Latin/Greek • Arabic & Farsi: HP Arabic-8, Windows Arabic, Code Page 864, Farsi, ISO 8859/6 Latin Arabic • OCR: OCR-A, OCR-BMedia and tray_ 48 6.media and tray This chapter provides information on how to load print media into your machine. This chapter includes: • Loading originals • Selecting print media • Changing the tray size • Loading paper in the tray • Printing on special media • Using the output support LOADING ORIGINALS You can use the scanner glass to load an original for copying or scanning. On the scanner glass Using the scanner glass, you can copy or scan originals. You can get the best scan quality, especially for colored or gray-scaled images. 1. Lift and open the scanner lid. 2. Place the original face down on the scanner glass. Align it with the registration guide at the top left corner of the glass. 3. Close the scanner lid. • Leaving the scanner lid open while copying may affect copy quality and toner consumption. • Dust on the scanner glass may cause black spots on the printout. Always keep it clean (See "Cleaning the scan unit" on page 75). • If you are copying a page from a book or magazine, lift the scanner lid until its hinges are caught by the stopper and then close the lid. If the book or magazine is thicker than 30 mm, start copying with the scanner lid open. • Be careful not to break the scanner glass. You may get hurt. • Do not put hands while closing the scanner lid. The scanner lid may fall on your hands and get hurt. • Do not look the light from inside of the scanner while copying or scanning. It is harmful to eyes. SELECTING PRINT MEDIA You can print on a variety of print media, such as plain paper, envelopes, labels, and transparencies. Always use print media that meets the guidelines for use with your machine and from the appropriate tray. Guidelines for selecting the print media Print media that does not meet the guidelines outlined in this user’s guide may cause the following problems: • Poor print quality • Increased paper jams • Premature wear on the machine. • Permanent fuser damage, not covered under warranty. Properties, such as weight, composition, grain, and moisture content, are important factors that affect the machine’s performance and the output quality. When you choose print materials, consider the following: • The type, size and weight of the print media for your machine are described in print media specifications (See "Print media specifications" on page 93). • Desired outcome: The print media you choose should be appropriate for your project. • Brightness: Some print media are whiter than others and produce sharper, more vibrant images. • Surface smoothness: The smoothness of the print media affects how crisp the printing looks on the paper. • Some print media may meet all of the guidelines in this section and still not produce satisfactory results. This may be the result of the sheets characteristics, improper handling, unacceptable temperature and humidity levels, or other variables over which cannot be controlled. • Before purchasing large quantities of print media, ensure that it meets the specifications in this user’s guide and that it meets your output requirements. • Using print media that does not meet these specifications may cause problems, requiring repairs. Such repairs are not covered by Media and tray_ 49 the warranty or service agreements. The amount of paper put into the tray may differ according to media type used (See "Print media specifications" on page 93). • Using inflammable print media can cause a fire. • Use designated print media (See "Print media specifications" on page 93). The use of inflammable media or foreign materials left in the printer may lead to overheating of the unit and, in rare cases may cause a fire. Media sizes supported in each mode MODE SIZE TYPE SOURCE Copy mode Letter, A4, Legal, Oficio, US Folio, Executive, JIS B5, A5 For details about paper type, click the following link ("Print media specifications" on page 93). Tray Simplex printing For details about paper size, click the following link ("Print media specifications" on page 93). For details about paper type, click the following link ("Print media specifications" on page 93). Tray Duplex printing (Manual) a a.75 to 90 g/m2 (20~24 lbs bond) only (See "Print media specifications" on page 93). Letter, A4, Legal, US Folio, Oficio Plain, Color, Preprinted, Recycled, Bond, Archive Manual feeding in the tray CHANGING THE TRAY SIZE The tray is preset to Letter or A4 size, depending on your country. To change the size, you need to adjust the paper guides. 3 1 2 1 Tray 2 Paper length guide 3 Paper width guide 1. Open front door and pinch the paper length guide and pull it out to extend the tray. Because the machine is very light, it can move when you open and close the tray or install and remove the toner cartridge. Be careful not to move the machine when performing these tasks. 2. Flex or fan the edge of the paper stack to separate the pages before loading the paper. Insert the paper into the tray. 3. Load paper with the print side facing up. Make sure that all four corners are flat in the tray. Do not overload the tray. Ensure that the paper level is below the paper capacity mark on the inside of the tray.Media and tray_ 50 4. Pinch the paper length guide to adjust the guide so that it is flush up against the rear edge of the paper; then pinch the paper width guides so they are flush against the sides of the paper. • Do not push the paper width guide too far causing the media to warp. • Do not use a paper with more than 6 mm (0.24 inch.) curl. • If you do not adjust the paper width guides, it may cause paper jams. LOADING PAPER IN THE TRAY Tray 1. Open the front door, pinch the paper length guide and pull it out to extend the tray. Then, adjust the tray size to the media size you are loading (See "Changing the tray size" on page 49). 2. Flex or fan the edge of the paper stack to separate the pages before loading papers. 3. Place the paper with the side you want to print facing up. When you print a document, set the paper type and size for the tray. For information about setting the paper type and size on the control panel (See "Setting the default tray and paper" on page 46). • If you experience problems with paper feeding, check whether the paper meets the media specifications. Then, try placing one sheet at a time in tray (See "Print media specifications" on page 93, and "Printing on special media" on page 51). • The settings made from the machine driver override the settings on the control panel. Manual feeding in the tray The tray can hold special sizes and types of print material, such as postcards, note cards, and envelopes. It is useful for single page printing on letterhead or colored paper. Tips on using the manual feeding method • If you select Paper > Source > Manual Feeder from your printer driver, you need to press Start button each time you print a page. Load only one type, size and weight of print media at a time in the tray. • To prevent paper jams, do not add media while printing. • Print media should be loaded face up with the top edge going into the tray first and be placed in the center of the tray. • Always load the use recommended print media to avoid paper jams and print quality problems (See "Print media specifications" on page 93). • Flatten any curl on postcards, envelopes, and labels before loading them into the tray. 1. Load the paper in the tray. • When printing on special media, you must follow the loading guideline (See "Printing on special media" on page 51). • When paper does not feed well while printing, gently push the paper in manually until it starts feeding automatically. 2. Squeeze the tray paper width guides and adjust them to the width of the paper. Do not force them too much, or the paper will bend resulting in a paper jam or skew. 3. Open the output tray and support. 4. To print from an application, open the application and open the print menu. 5. Open Printing Preferences (See "Opening printing preferences" on page 55). 6. Click on the Paper tab in Printing Preferences, and select an appropriate paper type. For example, if you want to use a label, set the paper type to Label. 7. Select Manual Feeder in paper source, then press OK. 8. Start printing.Media and tray_ 51 If you are printing multiple pages, load the next sheet after the first page prints out, and press Start button. Repeat this step for every page to be printed. PRINTING ON SPECIAL MEDIA The table below shows the available special media for printing. When printing on a special media, we recommend you feed one paper at a time. Check the maximum input number of media for tray (See "Print media specifications" on page 93). TYPES TRAY MANUAL FEEDING IN TRAY A a.Load one paper at a time. Plain ● ● Thick ● ● Thin ● ● Cotton ● Color ● Preprinted ● Recycled ● ● Envelope ● Transparency ● Labels ● CardStock ● Bond ● Archive ● ● (●: supported, Blank: Not supported) The following media types are shown in the Printing Preferences. This paper type option allows you to set the type of paper to be loaded in the tray. Selecting the appropriate media will let you get the best printout quality. Selecting inappropriate media can result in poor or unfused print quality; and/or cause jamming problems. • Plain: Normal plain paper. Select this type if your printing on 60 to 120 g/m2 (16 to 32 lbs bond). • Thick: 90 to 163 g/m2 (24 to 43 lbs bond) thick paper. • Thin: 60 to 70 g/m2 (16 to 19 lbs bond) thin paper. • Cotton: 75 to 90 g/m2 (20 to 24 lbs bond) cotton paper. • Color: 75 to 90 g/m2 (20 to 24 lbs bond) color-back grounded paper. • Preprinted: 75 to 90 g/m2 (20 to 24 lbs bond) preprinted/letterhead paper. • Recycled: 60 to 90 g/m2 (16 to 24 lbs bond) recycled paper. When you use recycled paper, printouts might be wrinkled and/or jamming may occur due to excessive curl. • CardStock: 105 to 163 g/m2 (28 to 43 lbs bond) cardstock. • Envelope: 75 to 90 g/m2 (20 to 24 lbs bond) envelope. • Transparency: 138 to 146 g/m2 (37 to 39 lbs bond) transparency paper. • Labels: 120 to 150 g/m2 (32 to 40 lbs bond) labels. • Bond: 105 to 120 g/m2 (28 to 32 lbs bond) bond. • Archive: 70 to 90 g/m2 (19 to 24 lbs bond) If you need to keep the print-out for a long time, such as for archives. Envelopes Successful printing on envelopes depends upon the quality of the envelopes. To print on an envelope, the stamp area should be on the left side and the end of the envelope with the stamp area should enter the printer first in the center of the tray. • When selecting envelopes, consider the following factors: - Weight: The weight of the envelope paper should not exceed 90 g/m2 otherwise, jams may occur. - Construction: Prior to printing, envelopes should lie flat with less than 6 mm ( 0.24 inch.) of curl, and should not contain air. - Condition: Envelopes should not be wrinkled, nicked, either damaged. - Temperature: Use envelopes that are compatible with the heat and pressure of the machine during operation. • Use only well-constructed envelopes with sharp-and well-creased folds. • Do not use stamped envelopes. • Do not use envelopes with clasps, snaps, windows, coated lining, self-adhesive seals, or other synthetic materials. • Do not use damaged or poorly made envelopes. • Be sure the seam at both ends of the envelope extends all the way to the corner of the envelope. 1 Acceptable 2 Unacceptable • Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must use adhesives compatible with the machine’s fusing temperature about 170°C (338 °F) for 0.1 second. The extra flaps and strips might cause wrinkling, creasing, or jams, and may even damage the fuser. • For the best print quality, position margins no closer than 15 mm ( 0.59 inch.) from the edges of the envelope. • Avoid printing over the area where the envelope’s seams meet.Media and tray_ 52 Transparencies To avoid damaging the machine, use only transparencies designed for laser printers. • Transparencies used in the machine must be able to withstand machine’s fusing temperature. • Place them on a flat surface after removing them from the machine. • Do not leave unused transparencies on the paper tray for long periods of time. Dust and dirt may accumulate on them, resulting in spotty printing. • To avoid smudging caused by fingerprints, handle transparencies carefully. • To avoid fading, do not expose printed transparencies to prolonged sunlight. • Ensure that transparencies are not wrinkled, curled, or have any torn edges. • Do not use transparencies that separate from the backing sheet. • To prevent transparencies from sticking to each other, do not let the printed sheets stack up as they are begin printed out. Labels To avoid damaging the machine, use only labels designed for laser machines. • When selecting labels, consider the following factors: - Adhesives: The adhesive material should be stable at your machine’s fusing temperature (about 170°C (338 °F)). - Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets that have spaces between the labels, causing serious jams. - Curl: Prior to printing, labels must lie flat with no more than 13 mm (0.51 inch.) of curl in any direction. - Condition: Do not use labels with wrinkles, bubbles, or other indications of separation. • Make sure that there is no exposed adhesive material between labels. Exposed areas can cause labels to peel off during printing, which can cause paper jams. Exposed adhesive can also cause damage to machine components. • Do not run a sheet of labels through the machine more than once. The adhesive backing is designed for only a single pass through the machine. • Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or otherwise damaged. Card stock/Custom-sized paper Postcards, cards and other custom-sized materials can be printed with this machine. • Do not print on media smaller than 76 mm (3.00 inches) wide or 183 mm (7.20 inches) long. • In software applications, set the margins at least 6.4 mm (0.25 inches) away from the edges of the material. Letterhead/Preprinted paper SINGLE-SIDED DOUBLE-SIDED Face up Face down • Letterhead/ Preprinted paper must be printed with heat-resistant ink that will not melt, vaporize, or release hazardous emissions when subjected to the machine’s fusing temperature about 170°C(338 °F) for 0.1 second. • Letterhead/ Preprinted paper ink must be non-flammable and should not adversely affect machine rollers. • Forms and letterhead should be sealed in a moisture-proof wrapping to prevent changes during storage. • Before you load letterhead/preprinted paper, verify that the ink on the paper is dry. During the fusing process, wet ink can come off preprinted paper, reducing print quality.Media and tray_ 53 USING THE OUTPUT SUPPORT The surface of the output tray may become hot if you print a large number of pages at once. Make sure that you do not touch the surface, and do not allow children near it. The printed pages stack on the output tray, and the output support will help the printed pages to align. The machine sends printouts to the output tray by default.Printing_ 54 7.printing This chapter explains common printing tasks. This chapter includes: • Introducing useful software program • Printer driver features • Basic printing • Opening printing preferences • Using help • Using special print features • Changing the default print settings • Setting your machine as a default machine • Printing to a file (PRN) • Macintosh printing • Linux printing The procedures in this chapter are mainly based on Windows XP. INTRODUCING USEFUL SOFTWARE PROGRAM Samsung AnyWeb Print This tool helps you to screen-capture, preview, scrap and print the screen of Windows Internet Explorer more easily, than when you use the ordinary program. Click Start > All programs > Samsung Printers > Samsung AnyWeb Print > Download the latest version to link the website where the tool is available for the download. This tool is available only for Windows operating systems. PRINTER DRIVER FEATURES Your printer drivers support the following standard features: • Paper orientation, size, source, and media type selection • Number of copies In addition, you can use various special printing features. The following table shows a general overview of features supported by your printer driver: Some models or operating systems may not support some of the feature(s) in the following table. Printer driver FEATURE WINDOWS Print quality option ● Poster printing ● Multiple pages per sheet ● Booklet printing (manual) ● Fit to page printing ● Reduce and enlarge printing ● Different source for first page ● Watermark ● Overlay ● Double-sided printing (manual) ● (●: supported) BASIC PRINTING Your machine allows you to print from various Windows, Macintosh, or Linux applications. The exact steps for printing a document may vary depending on the application you use. • Your Printing Preferences window that appears in this user’s guide may differ depending on the machine in use. However, the composition of the Printing Preferences window is similar. Check the operating system(s) that are compatible with your machine. Refer to the OS compatibility section of Printer Specifications (See "System requirements" on page 25). • When you select an option in Printing Preferences, you may see a warning mark, , or . An exclamation mark ( ) means you can select that certain option but it is not recommended, and ( ) mark means you cannot select that option due to the machine’s settings or environment. The following procedure describes the general steps required for printing from various Windows applications. • Macintosh basic printing (See "Macintosh printing" on page 59). • Linux basic printing (See "Linux printing" on page 60). The following Printing Preferences window is for Notepad in Windows XP. Your Printing Preferences window may differ, depending on your operating system or the application you are using. 1. Open the document you want to print. 2. Select Print from the File menu. The Print window appears. 3. Select your machine from the Select Printer list.Printing_ 55 You can select the basic print settings, including the number of copies and the print range from within the Print window. To take advantage of the printer features provided by your printer driver, click Properties or Preferences in the application’s Print window to change the print setting (See "Opening printing preferences" on page 55). 4. To start the print job, click OK or Print in the Print window. If you are using Windows Internet Explorer, the Samsung AnyWeb Print too will save your time for screen-captured images or printing the image. Click Start > All programs > Samsung Printers > Samsung AnyWeb Print to link the website where the tool is available for the download. Canceling a print job If the print job is waiting in a print queue or print spooler, cancel the job as follows: 1. Click the Windows Start menu. 2. For Windows 2000, select Settings > Printers. • For Windows XP/Server 2003, select Printer and Faxes. • For Windows Server 2008/Vista, select Control Panel > Hardware and Sound > Printers. • For Windows 7, select Control Panel > Hardware and Sound > Devices and Printers. • For Windows Server 2008 R2, select Control Panel > Hardware > Devices and Printers. 3. For Windows Server 2000/XP/Server 2003/Server 2008/Vista, double-click your machine. For Windows 7/Server 2008 R2, right-click your printer icon > context menus > See what’s printing. If See what’s printing item has a ► mark, you can select other printer drivers connected with selected printer. 4. From the Document menu, select Cancel. You can also access this window by simply double-clicking the machine icon ( ) in the Windows task bar. You can also cancel the current job by pressing Stop/Clear button on the control panel. OPENING PRINTING PREFERENCES You can preview the settings you selected on the upper right of the Printing Preferences. 1. Open the document you want to print. 2. Select Print from the file menu. The Print window appears. 3. Select your machine from the Select Printer. 4. Click Properties or Preferences. Using Presets setting The Presets option, which is visible on each of the preferences tab except for the Samsung tab, allows you to save the current preferences for future use. To save a Presets item: 1. Change the settings as needed on each tab. 2. Enter a name for the item in the Presets input box. 3. Click (Add). When you save Presets, all current driver settings are saved. Select more options and click (Update), settings will be added to the Presets you made. To use a saved setting, select it from the Presets drop-down list. The machine is now set to print according to the settings you have selected. To delete saved settings, select it from the Presets drop-down list and click (Delete). You can also restore the printer driver’s default settings by selecting Default Preset from the Presets drop-down list.Printing_ 56 USING HELP Click the question mark on the upper-right corner of the window and click on the topic you want to know about. Then a pop up window appears with information about that option's feature which is provided from the driver. If you want to search information via a keyword, click the Samsung tab in the Printing Preferences window, and enter a keyword in the input line of the Help option. To get information about supplies, driver updates or registration and so on, click appropriate buttons. USING SPECIAL PRINT FEATURES Special print features include: • "Printing multiple pages on one sheet of paper" on page 56. • "Printing posters" on page 56. • "Printing booklets (Manual)" on page 56. • "Change percentage of your document" on page 57. • "Fitting your document to a selected paper size" on page 57. • "Using watermarks" on page 57. • "Using overlays" on page 58. • "Print quality options" on page 58. Printing multiple pages on one sheet of paper You can select the number of pages to print on a single sheet of paper. To print more than one page per sheet, the pages will be reduced in size and arranged in the order you specify. You can print up to 16 pages on one sheet. 1. To change the print settings from your software application, access Printing Preferences (See "Opening printing preferences" on page 55). 2. Click the Basic tab, select Multiple Pages Per Side in the Type drop-down list. 3. Select the number of pages you want to print per sheet (2, 4, 6, 9, or 16) in the Pages per Side drop-down list. 4. Select the page order from the Page Order drop-down list, if necessary. 5. Check Print Page Border to print a border around each page on the sheet. 6. Click the Paper tab, select the Size, Source, and Type. 7. Click OK or Print until you exit the Print window. Printing posters This feature allows you to print a single-page document onto 4, 9, or 16 sheets of paper, for the purpose of pasting the sheets together to form one poster-size document. 1. To change the print settings from your software application, access Printing Preferences (See "Opening printing preferences" on page 55). 2. Click the Basic tab, select Poster Printing in the Type drop-down list. 3. Select the page layout you want. Available layouts: • Poster 2x2: Document will be enlarged and be divided into 4 pages. • Poster 3x3: Document will be enlarged and be divided into 9 pages. • Poster 4x4: Document will be enlarged and be divided into 16 pages. 4. Select the Poster Overlap value. Specify Poster Overlap in millimeters or inches by selecting the radio button on the upper right of Basic tab to make it easier to paste the sheets together. 5. Click the Paper tab, select the Size, Source, and Type. 6. Click OK or Print until you exit the Print window. 7. You can complete the poster by pasting the sheets together. Printing booklets (Manual) This feature prints your document on both sides of a paper and arranges the pages so that the paper can be folded in half after printing to produce a booklet. If you want to make a booklet, you need to print on Letter, Legal, A4, US Folio, or Oficio sized print media. 8 9 1. To change the print settings from your software application, access the Printing Preferences (See "Opening printing preferences" on page 55). 2. Click the Basic tab, select Booklet Printing from the Type drop-down list. 3. Click the Paper tab, select the Size, Source, and Type. The Booklet Printing option is not available for all paper sizes. In order to find out the available paper size for this feature, select the available paper size in the Size option on the Paper tab. If you select an unavailable paper size, this option can be automatically canceled. Select only available paper. (paper without or mark). 4. Click OK or Print until you exit the Print window. 5. After printing, fold and staple the pages. Printing on both sides of the paper (Manual) You can print on both sides of a paper (duplex). Before printing, decide how you want your document oriented. You can use this feature with Letter, Legal, A4, US Folio, or Oficio sized paper (See "Print media specifications" on page 93). We recommend not to print on both sides of special media, such as labels, envelopes, or thick paper. It may cause a paper jam or damage the machine. 1. To change the print settings from your software application, access Printing Preferences (See "Opening printing preferences" on page 55). 2. Click the Advanced tab.Printing_ 57 3. From the Double-Sided Printing (Manual) section, select the binding option you want. • None • Long Edge: This option is the conventional layout used in bookbinding. • Short Edge: This option is the conventional layout used in calendars. 4. Click the Paper tab, select the Size, Source, and Type. 5. Click OK or Print until you exit the Print window. If your machine does not have a duplex unit, you should complete the printing job manually. The machine prints every other page of the document first. After that, a message appears on your computer. Follow the on-screen instructions to complete the printing job. Change percentage of your document You can change the size of a document to appear larger or smaller on the printed page by typing in a percentage you want. 1. To change the print settings from your software application, access Printing Preferences (See "Opening printing preferences" on page 55). 2. Click the Paper tab. 3. Enter the scaling rate in the Percentage input box. You can also click the up/down arrows to select the scaling rate. 4. Select the Size, Source, and Type in Paper Options. 5. Click OK or Print until you exit the Print window. Fitting your document to a selected paper size This feature allows you to scale your print job to any selected paper size regardless of the document size. This can be useful when you want to check fine details on a small document. A 1. To change the print settings from your software application, access Printing Preferences (See "Opening printing preferences" on page 55). 2. Click the Paper tab. 3. Select the paper size you want from the Fit to Page. 4. Select the Size, Source, and Type in Paper Options. 5. Click OK or Print until you exit the Print window. Using watermarks The watermark option allows you to print text over an existing document. For example, you use it when you want to have large gray letters reading “DRAFT” or “CONFIDENTIAL” printed diagonally across the first page or all pages of a document. There are several predefined watermarks that come with the machine. They can be modified, or you can add new ones to the list. Using an existing watermark 1. To change the print settings from your software application, access Printing Preferences (See "Opening printing preferences" on page 55). 2. Click the Advanced tab, and select the desired watermark from the Watermark drop-down list. You will see the selected watermark in the preview image. 3. Click OK or Print until you exit the print window. Creating a watermark 1. To change the print settings from your software application, access Printing Preferences (See "Opening printing preferences" on page 55). 2. From the Advanced tab, select Edit from the Watermark drop-down list. The Edit Watermarks window appears. 3. Enter a text message in the Watermark Message box. You can enter up to 256 characters. The message displays in the preview window. When the First Page Only box is checked, the watermark prints on the first page only. 4. Select watermark options. You can select the font name, style, size, and shade from the Font Attributes section, as well as set the angle of the watermark from the Message Angle section. 5. Click Add to add a new watermark to the Current Watermarks list. 6. When you have finished, click OK or Print until you exit the Print window. To stop printing the watermark, select None from the Watermark drop-down list. Editing a watermark 1. To change the print settings from your software application, access Printing Preferences (See "Opening printing preferences" on page 55). 2. Click the Advanced tab, select Edit from the Watermark drop-down list. The Edit Watermarks window appears. 3. Select the watermark you want to edit from the Current Watermarks list and change the watermark message and options. 4. Click Update to save the changes. 5. Click OK or Print until you exit the Print window. Printing_ 58 Deleting a watermark 1. To change the print settings from your software application, access Printing Preferences (See "Opening printing preferences" on page 55). 2. Click the Advanced tab, select Edit from the Watermark drop-down list. The Edit Watermarks window appears. 3. Select the watermark you want to delete from the Current Watermarks list and click Delete. 4. Click OK or Print until you exit the Print window. Using overlays An overlay is content you store on your hard disk drive that can be superimposed over any document you print. An overlay is often used to take the place of letterhead paper. Rather than using preprinted letterhead, you can create an overlay containing exactly the same information that is currently on your letterhead. To print a letter with your company’s letterhead, you do not need to load preprinted letterhead paper in the machine, instead you can just print the letterhead overlay on your document. Creating a new overlay To use a page overlay, you must create a new page overlay file containing your content. 1. Create or open a document containing the content you want to use in a new page overlay. Position the items exactly where you want them to appear when they are added to the original. 2. To save the document as an overlay, access Printing Preference. (See "Opening printing preferences" on page 55). 3. Click the Advanced tab, and select Edit from the Text drop-down list. The Edit Overlay window appears. 4. In the Edit Overlay window, click Create. 5. In the Save As window, type a name of up to eight characters in the File name box. Select the destination path, if necessary. (The default is C:\Formover.) 6. Click Save. The name appears on the Overlay List. 7. Click OK or Print until you exit the Print window. 8. The file is not printed. Instead, it is stored on your computer hard disk drive. The overlay document size must match same as the document you print. Do not create an overlay with a watermark. Using an overlay After an overlay has been created, it is ready to be printed with your document. To print an overlay on your document: 1. Create or open the document you want to print. 2. To change the print settings from your software application, access Printing Preferences (See "Opening printing preferences" on page 55). 3. Click the Advanced tab. 4. Select the desired overlay from the Text drop-down list. 5. If the overlay file you want does not appear in the Text drop-down list, select Edit from the list and click Load. Select the overlay file you want to use. If you have stored the overlay file you want to use in an external source, you can also load the file when you access the Open window. After you select the file, click Open. The file appears in the Overlay List box and is available for printing. Select the overlay from the Overlay List box. 6. If necessary, check Confirm Page Overlay When Printing box. If this box is checked, a message window appears each time you submit a document for printing, asking you to confirm that you wish to print an overlay over your document. If this box is not checked and an overlay has been selected, the overlay automatically prints with your document. 7. Click OK or Print until you exit the Print window. The selected overlay prints over your document. The resolution of the overlay document must match the resolution of the original print job. Deleting an overlay You can delete page overlays that you no longer use. 1. In the Printing Preferences window, click the Advanced tab. 2. Select Edit in the Overlay drop down list. 3. Select the overlay you want to delete from the Overlay List box. 4. Click Delete. 5. When the confirmation message window appears, click Yes. 6. Click OK or Print until you exit the Print window. Print quality options Use the following Graphics options to adjust the print quality for your specific printing needs. 1. To change the print settings from your software application, access Printing Preferences (See "Opening printing preferences" on page 55). 2. Click the Graphics tab. • The options you can select may vary depending on your printer model. • Refer to the help for each option’s information provided from the Printing Preferences. • Font/Text: Select Clear Text to print text sharper than on a normal document. Use All Text Black to print solid black, regardless of the color it appears on the screen. • Graphic Controller: Fine Edge allows you to emphasize edges of texts and fine lines for improving readability. • Advanced: Click this button, you can select Darkness and Toner Save features. - Darkness: The option adjusts the toner density on print output. The values are Normal, Light and Dark. - Toner Save: Selecting this option extends the life of your toner cartridge and reduces your cost per page without a significant reduction in print quality. On: Select this option to allow the machine to use less toner on each page. Off: Select this option if you do not wan to save toner when printing a document. 3. Click OK or Print until you exit the Print window.Printing_ 59 CHANGING THE DEFAULT PRINT SETTINGS Most Windows applications will override settings you specify in the printer driver. Change all print settings available in the software application first, and change any remaining settings using the printer driver. 1. Click the Windows Start menu. 2. For Windows 2000, select Settings > Printers. • For Windows XP/Server 2003, select Printers and Faxes. • For Windows Server 2008/Vista, select Control Panel > Hardware and Sound > Printers. • For Windows 7, select Control Panel > Hardware and Sound > Devices and Printers. • For Windows Server 2008 R2, select Control Panel > Hardware > Devices and Printers. 3. Right-click your machine. 4. For Windows XP/Server 2003/Server 2008/Vista, press Printing Preferences. For Windows 7 and Windows Server 2008 R2, from context menus, select the Printing preferences. If Printing preferences item has a ► mark, you can select other printer drivers connected with the selected printer. 5. Change the settings on each tab. 6. Click OK. If you want to change the settings for each print job, change it in Printing Preferences. SETTING YOUR MACHINE AS A DEFAULT MACHINE 1. Click the Windows Start menu. 2. For Windows 2000, select Settings > Printers. • For Windows XP/Server 2003, select Printers and Faxes. • For Windows Server 2008/Vista, select Control Panel > Hardware and Sound > Printers. • For Windows 7, select Control Panel > Hardware and Sound > Devices and Printers. • For Windows Server 2008 R2, select Control Panel > Hardware > Devices and Printers. 3. Select your machine. 4. Right-click your machine and select Set as Default Printer. For Windows 7 and Windows Server 2008 R2 If Set as default printer item has a ► mark, you can select other printer drivers connected with the selected printer. PRINTING TO A FILE (PRN) You will sometimes need to save the print data as a file. You can print the document to a file instead of routing it directly to a printer. The document is saved with the printer formatting, such as font selection and color specifications, in a .prn file that can be printed on another printer. To save a print job as a file 1. Check the Print to file box at the Print window. 2. Click Print. 3. Type in the destination path and the file name, and then click OK. For example C:\Temp\file name. If you type in only the file name, the file is automatically saved in Documents and Settings or Users. The saved folder may differ, depending on your operating system or the application you are using. MACINTOSH PRINTING This chapter explains how to print using a Macintosh. You need to set the print environment before printing. • USB connected (See "Macintosh" on page 27). Printing a document When you print with a Macintosh, you need to check the printer driver setting in each application you use. Follow the steps below to print from a Macintosh: 1. Open an application and select the file you want to print. 2. Open the File menu and click Page Setup (Document Setup in some applications). 3. Choose your paper size, orientation, scaling, other options, and make sure that your machine is selected. Click OK. 4. Open the File menu and click Print. 5. Choose the number of copies you want and indicate which pages you want to print. 6. Click Print.Printing_ 60 Changing printer settings You can use advanced printing features provided by your machine. Open an application and select Print from the File menu. The machine name, which appears in the printer properties window may differ depending on the machine in use. Except for the name, the composition of the printer properties pane is similar to the following. • The setting options may differ depending on models and Macintosh OS versions. • The following panes may differ, depending on your operating system or the application you are using. The following pane is the first pane you will see when you open the printer properties pane. Select other advanced features from the drop down list. Layout The Layout dialog provides options to adjust how the document appears on the printed page. You can print multiple pages on one sheet of paper. Select Layout from the drop-down list under Orientation to access the following features. • Pages per Sheet: This option determines how many pages to be printed on one page (See "Printing multiple pages on one sheet of paper" on page 60). • Layout Direction: This option allows you to select the printing direction on a page similar to the examples on UI. • Border: This option allows you to print a border around each page on the sheet. • Reverse Page Orientation: This option allows you to rotate paper 180 degrees. Graphics The Graphics dialog provides options for selecting Resolution. Select Graphics from the drop-down list under Orientation to access the graphic features. • Resolution (Quality): This option allows you to select the printing resolution. The higher the setting, the sharper the clarity of printed characters and graphics. A higher setting will also increase the time it takes to print a document. • Darkness: This option allows you to enhance the darkness of the printouts. The available options are Normal, Light, and Dark. Paper Set Paper Type to correspond to the paper loaded in the tray from which you want to print. This will let you get the best quality printout. If you load a different type of print material, select the corresponding paper type. Printer Settings The Printer Settings dialog provides Toner Save Mode, Reprint When Jammed, and Power Save options. Select Printer Settings from the drop-down list under Orientation to access the following features: • Toner Save Mode: Selecting this option extends the life of your toner cartridge and reduces your cost per page without a significant reduction in print quality. - Printer Setting: If you select this option, this feature is determined by the setting you’ve made from the machine (For some models, you cannot change the setting from the machine. In this case, the default setting is Off). - On: Select this option to allow the printer to use less toner on each page. - Off: Set this option if you do not need to save toner when printing a document. • Power Save: When this option is checked, the switches to the power save mode after a predetermined amount of time. Printing multiple pages on one sheet of paper You can print more than one page on a single sheet of paper. This feature provides a cost-effective way to print draft pages. 1. Open an application, and select Print from the File menu. 2. Select Layout from the drop-down list under Orientation. In the Pages per Sheet drop-down list, select the number of pages you want to print on one sheet of paper. 3. Select the other options you want to use. 4. Click Print, then the machine prints the selected the number of pages you want to print on one sheet of paper. LINUX PRINTING Printing from applications There are several Linux applications that allow you to print using the Common UNIX Printing System (CUPS). You can print using any of these applications. 1. Open an application, and select Print from the File menu. 2. Select Print directly using LPR.Printing_ 61 3. From the LPR GUI window, select the model name of your machine from the printer list and click Properties. 4. Change the print job properties using the following four tabs displayed at the top of the window. • General: This option allows you to change the paper size, the paper type, and the orientation of the documents. It enables the duplex feature, adds start and end banners, and changes the number of pages per sheet. • Text: This option allows you to specify the page margins and set the text options, such as spacing or columns. • Graphics: This option allows you to set image options that are used when printing images/files, such as color options, image size, or image position. • Advanced: This option allows you to set the print resolution, paper source and special print features. If an option is grayed out, it means that the grayed out option is not supported by your machine. 5. Click Apply to apply the changes and close the Properties window. 6. Click OK in the LPR GUI window to start printing. 7. The Printing window appears, allowing you to monitor the status of your print job. To abort the current job, click Cancel. Printing files You can print many different types of files on your machine using the standard CUPS way, directly from the command line interface. The CUPS LPR utility allows you to do that. But the drivers package replaces the standard LPR tool by a much more user-friendly LPR GUI program. To print any document file: 1. Type lpr from the Linux shell command line and press Enter. The LPR GUI window appears. When you type only lpr and press Enter, the Select file(s) to print window appears first. Just select any files you want to print and click Open. 2. From the LPR GUI window, select your machine from the list, and change the print job properties. 3. Click OK to start printing. Configuring printer properties Using the Printer Properties window provided by the Printers configuration, you can change the various properties for your printer. 1. Open the Unified Driver Configurator. If necessary, switch to Printers configuration. 2. Select your machine from the available printers list and click Properties. 3. The Printer Properties window opens. The following five tabs display at the top of the window: • General: This option allows you to change the printer location and name. The name entered in this tab displays on the printer list in Printers configuration. • Connection: This option allows you to view or select another port. If you change the machine port from USB to parallel or vice versa while in use, you must re-configure the machine port in this tab. • Driver: Allows you to view or select another printer driver. By clicking Options, you can set the default device options. • Jobs: This option shows the list of print jobs. Click Cancel job to cancel the selected job and select the Show completed jobs check box to see previous jobs on the job list. • Classes: This option shows the class that your machine is in. Click Add to Class to add your machine to a specific class or click Remove from Class to remove the machine from the selected class. 4. Click OK to apply the changes and close the Printer Properties window.Copying_ 62 8.copying This chapter gives you step-by-step instructions for copying documents. This chapter includes: • Basic copying • Changing the settings for each copy • ID card copying When printing a fluorescent color, due to the property of the scanner, the result may differ from the original. BASIC COPYING The following is the normal procedure for copying your originals. 1. Place a single original face down on the scanner glass (See "Loading originals" on page 48). 2. Enter the number of copies using the +/- buttons if necessary. You can copy an original up to 99 pages at a time. • If you press +/- buttons short, the number of one’s place appeared on the display increases or decreases one by one. • If you press +/- buttons long, the number of ten’s place appeared on the display increases or decreases one by one. 3. If you want to customize the copy settings including Darkness, Original Type and more by using the Printer Settings Utility (See "Changing the settings for each copy" on page 62). 4. Press Start button to begin copying. If you need to cancel the copying job during the operation, press Stop/Clear button and the copying will stop. CHANGING THE SETTINGS FOR EACH COPY Your machine provides default settings for copying so that you can quickly and easily make a copy. However, if you want to change the options for each copy, use the Printer Settings Utility. If you press Stop/Clear button on the control panel while setting the copy options, all of the options you have set for the current copy job will be canceled and returned to their default status. Or, they will automatically return to their default status after the machine completes the copy in progress. Original Type The original type setting is used to improve the copy quality by selecting the document type for the current copy job. 1. Double-click the Smart Panel icon on the Windows task bar (or Notification Area in Linux). You can also click Smart Panel on the status bar in Mac OS X. Or, if you are a Windows user, you can launch it from the Start menu, select Programs or All Programs > Samsung Printers > your printer driver name > Smart Panel. 2. Click Printer Settings. 3. Click Copy > Original Type. Select the appropriate value from the drop-down list, and then click Apply. • Text: Use for originals containing mostly text. • Text/Photo: Use for originals with mixed text and photographs. • Photo: Use when the originals are photographs. Darkness If you have an original containing faint marking and dark images, you can adjust the brightness to make a copy that is easier to read. 1. Double-click the Smart Panel icon on the Windows task bar (or Notification Area in Linux). You can also click Smart Panel on the status bar in Mac OS X. Or, if you are a Windows user, you can launch it from the Start menu, select Programs or All Programs > Samsung Printers > your printer driver name > Smart Panel. 2. Click Printer Setting. 3. Click Copy > Darkness. Select the appropriate value from the drop-down list, and then click Apply. • Lightest: Works well with lightest print. • Light: Works well with light print. • Normal: Works well with standard typed or printed originals. • Dark: Works well with dark print. • Darkest: Works well with darkest print. Erasing background images You can set the machine to print an image without its background. This copy feature removes the background color and can be helpful when copying an original containing color in the background such as a newspaper or a catalog. 1. Double-click the Smart Panel icon on the Windows task bar (or Notification Area in Linux). You can also click Smart Panel on the Status bar in Mac OS X. Or, if you are a Windows user, you can launch it from the Start menu, select Programs or All Programs > Samsung Printers > your printer driver name > Smart Panel. 2. Click Printer Setting. 3. Click Copy > Auto Suppress Background. Select the appropriate value from the drop-down list, and then click Apply. • Off: Does not use this feature. • Auto: Optimizes the background. Setting the copy scan size 1. Double-click the Smart Panel icon on the Windows task bar (or Notification Area in Linux). You can also click Smart Panel on the status bar in Mac OS X. Or, if you are a Windows user, you can launch it from the Start menu, select Programs or All Programs > Samsung Printers > your printer driver name > Smart Panel. 2. Click Printer Setting. 3. Click Copy > Copy Scan Size. Select the appropriate value from the drop-down list, and then click Apply.Copying_ 63 ID CARD COPYING Your machine can print 2-sided originals on one sheet. The machine prints one side of the original on the upper half of the paper and the other side on the lower half without reducing the size of the original. This feature is helpful for copying a small-sized item such as business card. The original must be placed on the scanner glass to use this feature. 1. Place the front side of an original facing down on the scanner glass where arrows indicate as shown. Then, close the scanner lid. 2. Press ID Copy button on the control panel. Then, the Front LED on the control panel lights on. 3. Press Start button on the control panel. Your machine begins scanning the front side of an original. When scanning the front side of an original is finished the Back LED on the control panel lights on. 4. Turn the original over and place it on the scanner glass where arrows indicate as shown. Then, close the scanner lid. 5. Press Start button on the control panel to begin scanning the back side of an original. 6. The machine prints both sides of an original without reducing its size. • If you do not press Start button, only the front side will be copied. • If the original is larger than the printable area, some portions may not be printed. • If you press Stop/Clear button, the copy job is canceled.Scanning_ 64 9.scanning Scanning with your machine lets you turn pictures and text into digital files that can be stored on your computer. This chapter includes: • Basic scanning method • Scanning originals and sending to your computer (Scan to PC) • Using Samsung Scan and Fax manager • Scanning with TWAIN-enabled software • Scanning using the WIA driver • Macintosh scanning • Linux Scanning When scanning a fluorescent color, due to the property of the scanner, the result my differ from the original. The maximum resolution that can be achieved depends upon various factors, including a computer speed, available disk space, memory, the size of the image being scanned and color bit depth settings. Thus, depending on your system and what you are scanning, you may not be able to scan at a certain resolution, especially using enhanced resolution. Supported optional devices and features may differ according to your model. Check your model name (See "Features by Models" on page 18). BASIC SCANNING METHOD You can scan the originals with your machine via an USB cable or the network. • Samsung Scan and Fax Manager: Scan the originals from the control panel. Then, the scanned data will be stored in the connected computers My Documents folder. When you install all the software in the supplied CD, the Samsung Scan and Fax Manager is also automatically installed on your computer. This feature can be used via the local connection or the network connection (See "Using Samsung Scan and Fax manager" on page 64). • TWAIN: TWAIN is the one of a preset imaging applications. Scanning an image launches the selected application, enabling you to control the scanning process. This feature can be used via the local connection or the network connection (See "Scanning with TWAIN-enabled software" on page 65). • SmarThru: This program is the accompanying software for your machine. You can use this program to scan images or documents. This feature can be used via the local connection or the network connection (See "SmarThru" on page 70). • WIA: WIA stands for Windows Images Acquisition. To use this feature, your computer must be connected directly with the machine via an USB cable (See "Scanning using the WIA driver" on page 66). SCANNING ORIGINALS AND SENDING TO YOUR COMPUTER (SCAN TO PC) You can scan an image on the machine via the Samsung Scan and Fax Manager program that is installed in your USB connected computer. Scan to PC feature only works when your machine is connected via USB. For USB connected machine This is a basic scanning method for USB-connected machine. 1. Make sure that the machine is connected to your computer and powered on. 2. Place a single original face down on the scanner glass (See "Loading originals" on page 48). 3. Press Scan to button on the control panel. 4. Press Start button on the control panel to begin scanning. • Scanned image is saved in computer’s My Documents > My Pictures > Samsung folder. • You can use Twain driver to scan quickly in Samsung Scan and Fax Manager program. • From the Start menu, select Programs or All Programs > Samsung Printers > Scan and Fax Manager > Scan and Fax Manager > Quick Scan. USING SAMSUNG SCAN AND FAX MANAGER If you have installed the printer driver, the Samsung Scan and Fax Manager program is installed too. For program information and the scanner's status, start Samsung Scan and Fax Manager. With this program, you can change scan settings and add or delete the folders where scanned documents are saved in your computer. The Samsung Scan and Fax Manager program can only be used in the Windows and Mac OS system. If you use the Macintosh, click the following link ("Setting scan information in Scan and Fax Manager" on page 67). 1. From the Start menu, select Programs or All Programs > Samsung Printers > Scan and Fax Manager > Scan and Fax Manager > Quick Scan. You can open Samsung Scan and Fax Manager by right-clicking the Smart Panel icon in the Windows task bar and selecting Scan and Fax Manager. 2. Select the appropriate machine from the Samsung Scan and Fax Manager window. 3. Press Properties. 4. The Set Scan Button tab allows you to change the file saving destination and scan settings, to add or delete application program, and to change the file format to be saved. You can change the scanning machine by using the Change Port tab (Local or Network). 5. When setting is done, press OK.Scanning_ 65 Set Scan Button tab Scan Destination • Available Destination List: Shows the list of applications currently linked to scanned images in the PC’s registry. Select the program you want to use and click the right arrow and add to Front Panel Destination List. • Front Panel Destination List: Shows the list of applications to open scanned image. You can choose only one application to open scanned image from the Available Destination List. • Add Application: Allows you to add application you want to use to Available Destination List. • Remove Application: Allows you to remove an item added by the user in the Available Destination List. • File Format: Allows you to select the form of scanned data to be saved. You can choose among BMP, JPEG, PDF and TIFF. Scan Property • Computer ID: Shows the ID of your computer. • Save Location: Allows you to choose the location of the default saving folder. • Resolution: Allows you to choose the scan resolution. • Scan Color: Allows you to choose the scan color. • Scan Size: Allows you to choose the scan size. • ADF Duplex: Automatically scans both sides. If your model does not support this option, it will be grayed out. • Show Preview: Checking this box allows you to preview applied scan options. You can modify the options before scanning. • Default: Allows you to go back to default options. Change Port tab Local Scanner Select when your machine is connected via USB port. Network Scanner Select when your machine is connected via network port. • Auto detection on the network: Automatically detects your machine. • IP or Host name: Enter in your machine’s IP address to detect your machine. Scan Assistant When you press Quick Scan in Samsung Scan and Fax Manager, the Scan Assistant window appears. Scan Assistant allows you to adjust scan settings and start the scanning process. • Favorites: Allows you to save the current preferences settings for future use. When you save Favorites, all current scan settings are saved. To use a saved setting, select it from the Favorites drop down list. The machine is now set to scan according to the setting you selected. To delete saved setting, select it from the Favorites drop down list and click Delete. To set a favorite as startup, select the favorite you want to set as startup, then click the Set as default button. • Scan settings: The following scan options are available. - Image Type: Allows you to chose the proper color settings for image scanning. - Resolution: Allows you to choose the image resolution. - Document Size: Allows you to choose the proper size of the scanned image. - Document Source: Allows you to choose the device (scan glass) you want to scan with. - Prompt for additional pages: If this check box is checked, you can scan pages continuously. This option is useful when you scan multi-page documents and/or when Document Source is