460UT-B Japon - 日本 - Mode d'emploi - Manuel de l'utilisateur - Manuels - Samsung
460UT-B Japon - 日本 - Mode d'emploi - Manuel de l'utilisateur - Manuels- Samsung
SAMSUNG sur FNAC.COM
- Liste des manuels utilisateur Samsung
- Revenir à l'accueil
ou juste avant la balise de fermeture -->

http://www.samsung.com/jp/support/model/LH46CBPLBB/XJ-downloads
http://downloadcenter.samsung.com/content/UM/201207/20120712125201546/BN59-01094C-08Eng.pdf
http://downloadcenter.samsung.com/content/EM/201006/20100626144019156/460UTn-2_460UT-2_460UTn-B_460UT-B_Jpn.pdf
http://downloadcenter.samsung.com/content/EM/201006/20100626144019156/460UTn-2_460UT-2_460UTn-B_460UT-B_Eng.pdf
http://downloadcenter.samsung.com/content/UM/201207/20120712130317745/BN59-01094C-08Jpn.pdf
Manuels Utilisateurs Samsung :
Samsung-NP300E5C-NP300E5C-T01FR-Manuels
Samsung-LE19C350-LE19C350D1W-Manuels
Samsung-PS50C450-PS50C450B1W-Manuels
Samsung-LE22C452C4H-Manuels
Samsung-PS50A566-PS50A566S2M-Manuels
Samsung-LE40A577P2M-Manuels
Samsung-20-XTDVBEUE-NOR-0327.pdf-E-Manual-Norvege-Manuels
Samsung-LE26B450-LE26B450C4W-Manuels
Samsung-PS51D490A1W-Manuels
Samsung-Kit-Pieton-Bluetooth-HM1200-Noir-HM1200-Manuels
Samsung-UE32D6530WS-Manuels
Samsung-NP530U3C-A01ES-NP530U3C-A01ES-Espagnol-Manuels
/Samsung-GALAXY-Y-Pro-Duos-GT-B5512-RUSSE-Manuels
Samsung-GALAXY-S-II-GT-I9100-SINGAPOUR-Manuels
Samsung-NP300E5ZI-NP300E5Z-A09MA-Manuels
Samsung-32-UE32D4000WXZF-serie-4-HD-TV-LED-TV-UE32D4000NW-Manuels
Samsung-UE46C6805-UE46C6805US-Norvege-Manuels
Samsung-UE40B6050-UE40B6050VW-Norvege-Manuels
Samsung-PS50C535-PS50C535C1W-Norvege-Manuels
Samsung-55-Smart-3D-LED-TV-ES6805-UE55ES6805U-Norvege-Manuels
Samsung-51-Smart-3D-Plasma-E8005-PS51E8005GU-Norvege-Manuels
Samsung-51-Smart-3D-Plasma-E555-PS51E555D1K-Norvege-Manuels
Samsung-46-Smart-3D-LED-TV-ES7005-UE46ES7005U-Norvege-Manuels
Samsung-46-Smart-3D-LED-TV-ES6535-UE46ES6535U-Norvege-Manuels
Samsung-40-Smart-3D-LED-TV-ES6565-UE40ES6565U-Norvege-Manuels
Samsung-46-Smart-3D-LED-TV-ES6565-UE46ES6565U-2012_Skype_NOR-0424.pdf-E-Manual-Norvege-Manuels
Samsung-51-Smart-3D-Plasma-E8005-PS51E8005GU-Norvege-Manuels
Samsung-LE46C630-LE46C630K1W-Manuels
Samsung-T240-JP-Manuels
Samsung-821SC-JP-Manuels
Samsung-941SC-JP-Manuels
Samsung-740SC-JP-Manuels
Samsung-940SC-JP-Manuels
Samsung-GALAXY-Tab-7.0-Plus-SC-02D-JP-Manuels
Samsung-SNE-60K_UM_Embedded_KOR_100526-SEC-Manuels
Samsung-M_YUKON_2K_WD175ARYKSU_DC68-02631L-05-120810.pdf-SEC-Manuels
Samsung-DA68-01829P.pdf-SEC-Manuels
Samsung-DA68-01829P.pdf-Manuels
Samsung-LE52A676-LE52A676A1M-Manuels
Samsung-UE55C8700-UE55C8790XS-Manuels
Samsung-22-LE22D450WXZF-serie-4-Full-HD-LCD-TV-LE22D450G1W-Manuels
Samsung-40-UE40D8000WXZF-serie-8-SMART-TV-3D-FULL-HD-LED-TV-UE40D8000YS-Manuels
Samsung-UE40ES7000-ZF-Slim-LED-40-SMART-INTERACTION-3D-UE40ES7000S-Manuels
Samsung-Galaxy-Tab-2-10.1-GT-P5100-Manuels
Samsung-Galaxy-Tab-2-7.0-GT-P3100-Manuels
Samsung-S22B350B-Manuels
Samsung-51-PS51E490WXZF-serie-4-3D-HD-TV-PDP-TV-PS51E490B1W-Manuels
Samsung-Galaxy-Note-II-GT-N7100-Manuels
Samsung-GT-I9300-Manuels
SAMSUNG/SAMSUNG-DV90-Manuels
Samsung-GT-N8000-Manuels
Samsung-AQV12KBBN-Pologne-Manuels
Samsung-ML-2165W-Roumanie-Manuels
Samsung-Notebook-Serie-7-Chronos-700Z5C-S01-NP700Z5C-S01DE-Manuels
Samsung-Player-One-noir-Open-market-GT-S5230-Manuels
Samsung-LE32E420E2W-Manuels
Samsung-910MP-Manuels
Samsung-Galaxy-S-SCL-noir-Open-market-GT-I9003-M4-Manuels
Samsung-Samsung-Galaxy-Pro-gris-Open-market-GT-B7510-Manuels
Samsung-Galaxy-Gio-noir-SFR-GT-S5660-Manuels
Samsung-Galaxy-Teos-noir-Bouygues-GT-I5800-Manuels
Samsung-Galaxy-Spica-noir-Bouygues-GT-I5700-Manuels
Samsung-Omnia-Pro-B7610-noir-Open-market-GT-B7610-Manuels
Samsung-S5610-GT-S5610-Manuels
Samsung-LE32C650-LE32C650L1W-Manuels
Samsung-LE26D450G1W-Manuels
Samsung-N145Plus-NP-N145P-Manuels
Samsung-N150-NP-N150-Manuels
Samsung-NP20-NP20FK02BG-SEF-Manuels
Samsung-GT-S5570_UM_Open_Gingerbread_Fre_Rev.1.0_110726_Screen.pdf-Manuels
Samsung-GT-I9070P_UM_Open_Gingerbread_Fre_Rev.1.0_120710_Screen.pdf-Manuels
Samsung-GT-I9300_UM_Open_Icecream_Fre_Rev.1.2_120725_Screen.pdf-Manuels
Samsung-LE32D400E1W-Manuels
Samsung-Gainable-Slim-MH026FEEA-Manuels
Samsung-CW21Z573N-Manuels
Samsung-40-UE40D5700WXZF-serie-5-SMART-TV-FULL-HD-LED-TV-UE40D5700RS-Manuels
Samsung-UE46C8700-UE46C8790XS-Manuels
Samsung-UE32D5700RS-Manuels
Samsung-UE46ES6300-ZF-Slim-LED-46-SMART-TV-3D-UE46ES6300S-Manuels
Samsung-2012_Skype_Eng-0316-1-Manuels
Samsung-NS140SDXEA-Manuels
Samsung-MH050FXEA2B-Manuels
Samsung-UE75ES9000S-Slim-LED-75-SMART-Interaction-3D-Manuels
Samsung-RR92HAWW-Manuels
Samsung-GT-P6200-Manuels
Samsung-Refrigerateur-1porteA-350-L-Blanc-RR82FHSW-Manuels
Samsung-UE26EH4000-ZF-LED-26-HD-TV-UE26EH4000W-Manuels
Samsung-E-MANUAL-X9DVBEU4E-ENG-Manuel
Samsung-GT-S5360_UM_Open_Gingerbread_Fre_Rev.1.0_111130_Screen-Manuel
Samsung-Galaxy-Tab-10-1-GT-P7500-M16-Manuel
Samsung-Galaxy-Tab-10-1-GT-P7500-M16-Manuels
Samsung-GT-S5360-Manuels
Samsung-Lecteur-Multimedia-Galaxy-S-WiFi-4-0-Blanc-8Go-YP-G1CW-Manuels
Samsung-Galaxy-551-noir-Open-marketGT-I5510-Manuels
Samsung-Galaxy-Note-10-1-GT-N8000-Manuels
Samsung-GALAXY-S-II-LTE-SC-03D-JP-Manuels
Samsung-GALAXY-Note-SC-05D-JP-Manuels
Samsung-NP-R530-NP-R530-JA02FR-Manuels
Samsung-UE40C6000-UE40C6000RW-Manuels
Samsung-Congelateur-1porteA-277-L-Blanc-RZ80FHSW-Manuels
Samsung-GT-B5310-Manuels
Nexus-S-noir-Open-market-GT-I9023-GT-B5310-Manuels
Samsung-32-LE32D450WXZF-serie-4-HD-TV-LCD-TV-Manuels
Samsung-46-UE46D5700WXZF-serie-5-SMART-TV-FULL-HD-LED-TV-UE46D5700RS-Manuels
Samsung-UE55ES6560S-Manuels
Samsung-UE46ES8000-ZF-Slim-LED-46-SMART-INTERACTION-3D-UE46ES8000S-Manuels
Samsung-UE55ES6300-ZF-Slim-LED-55-SMART-TV-3D-UE55ES6300S-Manuels
Samsung-AQV18UGAX-Manuels
Samsung-UE50EH5300W-Manuels
Samsung-LE46A676-LE46A676A1M-Manuels
Samsung-UE46C7700-UE46C7700WS-Manuels
Samsung-CW21Z503N-Manuels
Samsung-AQ18UGFN-Manuels
Samsung-Refrigerateur-DP-A275-L-Blanc-RT34GBSW-Manuels
Samsung-UE46ES6100W-Manuels
Samsung-RR92HASX-Manuels
Samsung-LE40S71B-Manuels
Samsung-UE32ES6710-ZF-Slim-LED-32-SMART-TV-3DUE32ES6710S-Manuels
Samsung-Galaxy-Ace-noir-Open-market-GT-S5830-Manuels
Samsung-GALAXY-Tab-GT-P1000-GT-P1000-M16-Manuels
Samsung-Omnia-Pro-B7330-noir-Open-market-GT-B7330-Manuels
Samsung-Omnia-Lite-noir-Orange-GT-B7300-Manuels
Samsung-Galaxy-S2-GT-I9100-Manuels
Samsung-Nexus-S-noir-Open-market-GT-I9023-Manuels
Samsung-Omnia-II-noir-SFRGT-I8000-Manuels
Samsung-Omnia-II-noir-SFR-GT-I8000-Manuels
Samsung-Omnia-7-noir-Open-market-GT-I8700-Manuels
Samsung-Galaxy-noir-Bouygues-GT-I7500-Manuels
Samsung-Galaxy-mini-gris-Open-market-GT-S5570-Manuels
Samsung-XE700T1A-HF1FR-Manuels
17,3" Série 3 300E7A - NP300E7A-S01FR - Manuels
40", UE40D6500WXZF, série 6, SMART TV, 3D, FULL HD, LED TV - UE40D6500VS - Manuels
CLX-3185FW Manuels
Galaxy Ace GT-S5830
Galaxy S II GT-I9100
Galaxy Tab 8.9 GT-P7310/M16
Galaxy Tab 10.1 GT-P7500/M16
Galaxy YGT-S5360
LE32C350 LE32C350D1W
LE40C630 LE40C630K1W
MM-C330D
MM-D330D
Micro-chaîne, MM-D330DWXZF, série 3 - MM-D330 - Manuels
N145Plus - NP-N145P - Manuels
N150 - NP-N150 - Manuels
RSH5UEPN
SGH-F490
Samsung Galaxy Ace noir - Open market - GT-S5830 - Manuels
Samsung Galaxy S II noir - Open market - Manuels
Samsung Galaxy S III - GT-I9300 - Manuels
Samsung Galaxy S noir - Open market - GT-I9000 - Manuels
Samsung Galaxy NoteGT-N7000
Samsung Galaxy SGT-I9000
Série 3 300E7A - NP300E7A-S03FR - Manuels
T23A550 T23A550
UE40D6500ZF UE40D6500VS
UE55ES8000/ZF, Slim LED 55", SMART INTERACTION, 3D - UE55ES8000S - Manuels
Wave 575 GT-S5750E
Wave II GT-S8530
16/4ppm Imprimante laser couleur CLP-310 Manuels
16/4ppm Multifonction lasercouleur CLX-3170FN Manuels
16/4ppm Multifonction lasercouleur CLX-3185FW Manuels Samsung
16/4ppm Multifonction laser couleur CLX-3185 Manuels Samsung
samsung-Wave-II-noir-Open-market-GT-S8530-Manuels
Samsung-Wave-noir-Open-market-GT-S8500-Manuels
Samsung-Wave-M-noir-Open-market-GT-S7250-Manuels
Samsung-Wave-578-noir-Open-market-GT-S5780-Manuels
Samsung-Wave-533-noir-Open-market-GT-S5330-Manuels
Samsung-Wave-3-noir-Open-market-GT-S8600-Manuels
Samsung-Player-HD-noir-Open-market-GT-I8910-Manuels
Samsung-Player-Duo-noir-Open-market-SGH-D980-Manuels
Samsung-Player-Addict-noir-Open-market-SGH-I900-Manuels
Samsung-Omnia-W-noir-Open-market-GT-I8350-Manuels
PRODUITS SAMSUNG : |
Belkin Chargeur Secteur pour Samsung Galaxy S |
Belkin Coque pour Samsung Galaxy S3 - Noire Translucide |
Belkin Etui cuir Verve Folio pour Samsung Galaxy S II |
Belkin Etui Pouch pour Samsung Galaxy S3 - Noir |
Belkin Kit de Charge Secteur + Automobile pour Samsung Galaxy S |
Belkin Lot de 3 protections d'écran pour Samsung Galaxy S3 |
Belkin Lot de 3 protections d'écran pour Samsung Galaxy S3 - Anti-reflets |
Belkin Lot de 3 protections d'écran Screen Guard pour Samsung Galaxy SII - Transparentes |
Belkin Micro-Chargeur allume-cigares pour Samsung Galaxy S |
Belkin Protection d'écran Screen Guard pour Samsung Galaxy SII - Confidentialité 360° |
Câble Omenex Plug & Phone pour Samsung |
Câble Omenex Plug & Phone pour Samsung |
Coque semi-rigide glossy noire pour Samsung Galaxy S II |
Déclencheur sans Fil Hahnel combi TF pour Canon/Pentax/Samsung |
Enceintes iLuv iSM524 noir pour Samsung Galaxy Tab |
Etui-Brassard Belkin DualFit pour Samsung Galaxy S II |
Etui Samsung CC9S70B noir |
Fnac chargeur secteur POWY pour Samsung SGH-D800 |
G-Mobility Pack confort pour Samsung Galaxy SII i9100 |
Imprimante Samsung CLX-3185FN - Ethernet |
Kensington Etui pliant pour Samsung Galaxy Tab |
Le Tanneur Etui cuir Pouch pour Samsung Galaxy S11 I9100 - Noir |
Lunettes 3D actives Samsung SSG-4100GB |
Modelabs 2 protections écran pour Samsung Galaxy ACE S5830 |
Modelabs Lot de 2 protections d'écran One Touch pour Samsung Galaxy Y S5360 - Transparentes |
Modelabs Lot de 2 protections d'écran pour Samsung Galaxy Note - Transparentes |
Muvit Adaptateur Jack 3,5 mm pour Samsung (ancienne connectique) |
Muvit Coque à rabat Agenda pour Samsung Galaxy Note - Noire |
Muvit Coque Doodle Coeur pour Samsung i9000 Galaxy S |
Muvit Coque Doodle Extraterrestres pour Samsung i9000 Galaxy S |
Muvit Coque Doodle Rose pour Samsung i9000 Galaxy S |
Muvit Coque silicone pour Samsung Galaxy Ace |
Muvit Coque silicone pour Samsung Galaxy - Noire |
Muvit Etui Clapet pour Samsung I9100 - Noir |
Muvit Etui Slim Clapet pour Samsung Galaxy Note |
Muvit Housse Minigel pour Samsung Galaxy - Noire |
Muvit Lot de 2 protections d'écran pour Samsung nexus S - 1 Miroir/1 Secret |
Muvit Lot de 2 protections d'écran pour Samsung S5830 |
Muvit Pack Accessoires pour Samsung S5830 |
Muvit Sticker Carbone pour Samsung I9100 |
Muvit Sticker Drapeau pour Samsung I9100 - I Love Ibiza |
Muvit Sticker Drapeau pour Samsung I9100 - I Love London |
Muvit Sticker Drapeau pour Samsung I9100 - I Love New-York |
Muvit Sticker Drapeau pour Samsung I9100 - I Love Paris |
Muvit Sticker Drapeau pour Samsung I9100 - I Love Tokyo |
Muvit Sticker Drapeau pour Samsung I9100 - United Kingdom |
Muvit Sticker Drapeau pour Samsung I9100 - USA |
QDOS Coque Cubic pour Samsung Galaxy II I9100 |
QDOS Coque Steel 4 pour Samsung Galaxy S II |
Samsung 305U1A 11,6" LED |
Samsung 305U1A 11,6" LED + Office Famille et Etudiant 2010 1 poste |
Samsung B1930HD 18.5" LCD TNT HD |
Samsung B5722 Double SIM |
Samsung Bac papier supplémentaire ML-S3710A - 520 feuilles |
Samsung Batterie ED-BP1310 |
Samsung batterie IA-BH130LB |
Samsung batterie IA-BP420E |
Samsung batterie IA-BP85ST |
Samsung batterie SLB-10A |
Samsung batterie SSB-690 ELS |
Samsung BD-E5300 |
Samsung BD-E5500 3D |
Samsung BD-E6100 3D |
Samsung BD-E8300 3D |
Samsung BD-ES5000 |
Samsung BD-ES6000 3D |
Samsung C3050 Stratus |
Samsung Câble Adaptateur HDTV pour Galaxy Tab 8.9" / 10.1" |
Samsung Câble data pour téléphones mobiles Samsung |
Samsung caméra Skype CY-STC1100 |
Samsung CB20A12 |
Samsung Ch@t335 - GT-S3350 - Noir |
Samsung Chargeur allume-cigares micro-USB |
Samsung chargeur de voyage pour SGH-P260 et SGH-G600 - Modèle Noir |
Samsung Chargeur secteur de voyage micro-USB |
Samsung CLP-325 + Toner Samsung CLT-K4072S Noir |
Samsung CLP-325 + Toner Samsung CLT-K4072S Noir |
Samsung CLP-620ND - Imprimante Ethernet |
Samsung CLP-C300A |
Samsung CLP-K300A |
Samsung CLP-M300A |
Samsung CLP-Y300A |
Samsung CLX-3185FW WiFi |
Samsung CLX-3185FW WiFi + Toner Samsung CLT-K4072S Noir + MCL Samar câble imprimante USB 2.0 |
Samsung CLX-3185N Ethernet |
Samsung CLX-3185W - Imprimante Multifonctions WiFi & Ethernet |
Samsung CLX-6220FX - Imprimante Multifonctions Ethernet |
Samsung Coque pour Galaxy S3 - Blanche |
Samsung Coque pour Galaxy S3 - Noire |
Samsung CY-SMN1000D meuble TV |
Samsung Disque Dur interne SSD 128 Go - 830 Series |
Samsung Disque Dur interne SSD 128 Go MZ-7PC128N 830 Series |
Samsung Disque Dur interne SSD 256 Go MZ-7PC256D 830 Series |
Samsung Disque Dur interne SSD 256 Go MZ-7PC256N 830 Series |
Samsung Disque Dur interne SSD 512 Go - 830 Series |
Samsung Disque Dur interne SSD 64 Go - 830 Series |
Samsung Disque Dur interne SSD 64 Go MZ-7PC064D 830 Series |
Samsung dongle Wi-Fi WIS12ABGNX |
Samsung DP7000A3B 23" LED Tactile USB 3.0 + Samsung ML-2165 - Imprimante Monochrome |
Samsung DP7000A3B 23" LED Tactile USB 3.0 + Sennheiser RS170 |
Samsung DP7000A3B-A01FR 23" LED Tactile USB 3.0 |
Samsung DP700A3B-S02FR 23" LED Tactile |
Samsung Duo de 2 coques pour Samsung Galaxy II I9100 - 1 Noire + 1 Camel |
Samsung Duo de 2 coques pour Samsung Galaxy II I9100 - 1 Noire matelassée + 1 Rose |
Samsung DV300F Argent/Rouge - WiFi |
Samsung DV300F Argent/Rouge - WiFi + Etui |
Samsung DV300F Noir - WiFi |
Samsung DV300F Noir - WiFi + Etui |
Samsung E1150 - Silver |
Samsung ES90 Noir |
Samsung Etui coque pour Galaxy Note - Noir |
Samsung Etui coque pour Samsung Galaxy Y S5360 - Noir |
Samsung Etui cuir pour Galaxy S II - Noir |
Samsung Etui rabat pour Samsung Galaxy S3 - Noir |
Samsung Eui cuir pour i9000 Galaxy S |
Samsung EX1 |
Samsung Flash SEF15A |
Samsung Flash SEF20A |
Samsung Galaxy Ace s5830 (sous Android) |
Samsung Galaxy Mini (sous Android) |
Samsung Galaxy Note |
Samsung Galaxy Note - Blanc |
Samsung Galaxy Note - Dark Blue |
Samsung Galaxy S2 (I9100G) - Blanc |
Samsung Galaxy S2 (I9100G) - Noir |
Samsung Galaxy S3 (I9300) - Blanc Marbre |
Samsung Galaxy S3 (I9300) - Bleu Galet |
Samsung Galaxy S WiFi 4,2" 16 Go |
Samsung Galaxy Tab 10,1" TFT 16 Go Blanc Wifi |
Samsung Galaxy Tab 10,1" TFT 16 Go Blanc Wifi + HP Housse Mini Sleeve 10,2" pour Netbook et Tablette - Ocean Drive |
Samsung Galaxy Tab 10,1" TFT 16 Go Noir Wifi |
Samsung Galaxy Tab 10,1" TFT Blanc + Western Digital My Book Live 1 To Ethernet |
Samsung Galaxy Tab 10,1" TFT Noir + Western Digital My Book Live 1 To Ethernet |
Samsung Galaxy Tab 2 10,1" 16 Go - Argent |
Samsung Galaxy Tab 2 10,1" 16 Go - Blanc |
Samsung Galaxy Tab 2 7.0" LED 8 Go |
Samsung Galaxy Tab 8,9" TFT Blanc 32 Go Wifi |
Samsung Galaxy Y Pro B5510 (sous Android) |
Samsung Galaxy Y Young s5360 (sous Android) |
Samsung Graveur DVD Externe Wifi - SE-208BW - Noir |
Samsung Graveur Externe BluRay SE-506AB |
Samsung HMX-F80 Noir |
Samsung HMX-Q20 Noir |
Samsung HMX-QF20 Noir |
Samsung HMX-W350 Noir (tout terrain) + Kit Accessoires Sport + micro SDHC 8 Go |
Samsung HMX-W350 Rouge (tout terrain) + Kit Accessoires Sport + micro SDHC 8 Go |
Samsung Housse Folio pour Galaxy Tab 10,1" |
Samsung Housse Folio pour Galaxy Tab 8,9" |
Samsung HT-D330 |
Samsung HT-D350 |
Samsung HT-D4500 |
Samsung HT-D5000 3D |
Samsung HT-E4200 3D |
Samsung HT-E4500 3D |
Samsung HT-E5200 3D |
Samsung HT-E5530 3D |
Samsung HT-ES4200 3D |
Samsung HT-ES6200 3D |
Samsung HT-ES8200 3D |
Samsung HW-E350 |
Samsung HW-E450 |
Samsung I9103 Galaxy R (sous Android) |
Samsung Kit de connexion USB & SD pour Galaxy Tab 10.1" |
Samsung Kit de vidéosurveillance tout-en-un SDE-3003P/EX |
Samsung Kit de vidéosurveillance tout-en-un SME-4220 |
Samsung kit HDMI |
Samsung kit papier 10 x 15 cm |
Samsung kit piéton filaire stéréo Jack 3,5 mm |
Samsung LE32E420 |
Samsung LE40D503 |
Samsung ML-1630/SCX4500 |
Samsung ML-2010D3 |
Samsung ML-2165 - Imprimante Monochrome |
Samsung ML-2165W - Imprimante WiFi |
Samsung ML-2545 - Imprimante Monochrome |
Samsung ML-2955DW - Imprimante Ethernet & WiFi |
Samsung ML-2955ND - Imprimante Ethernet |
Samsung ML-3310D - Imprimante Monochrome |
Samsung ML-3710DW - Imprimante Ethernet & WiFi |
Samsung MLT-D1052S |
Samsung MLT-D1082S |
Samsung MLT-D1092S |
Samsung MM-D430D |
Samsung MM-E320 |
Samsung MV800 Noir |
Samsung MV800 Noir + Etui Zadig & Voltaire Noir |
Samsung NP300E7A-S09FR 17,3" LED |
Samsung NP700Z5C 15.6" LED |
Samsung NP-RC730-S07FR 17.3"LED |
Samsung NX1000 Noir + Obj. Samsung NX 18 - 55 mm f/3.5 - 5.6 OIS |
Samsung NX200 Noir + Obj. Samsung NX 20 - 50 mm f/3.5 - 5.6 ED i-Function + Flash SEF-8A NG8 |
Samsung NX 50 - 200 mm f/4.0 - 5.6 ED OIS II i-Fonction; Dédié Boîtiers Hybrides |
Samsung NX 60 mm f/2.8 ED OIS SSA Macro i-Function; dédié Boîtiers Hybrides |
Samsung NX 85 mm f/1.4 ED SSA i-Function; dédié Boîtiers Hybrides |
Samsung NX Pancake 16 mm f/2.4 i-Function; dédié Boîtiers Hybrides |
Samsung NX Pancake 20 mm f/2.8 i-Function; dédié Boîtiers Hybrides |
Samsung NX Pancake 30 mm f/2.0; dédié Boîtiers Hybrides |
Samsung Oreillette Bluetooth HM1200 |
Samsung Pack d'accessoire pour Galaxy S II I9100 |
Samsung Pack HMX-F800 Noir : Caméscope HD + Etui + Carte SDHC 4 Go |
Samsung Pack HMX-Q200 Noir : Caméscope Full HD + Etui + Carte SDHC 4 Go |
Samsung PC portable NP300E5A-S0AFR 15.6"LED |
Samsung PL210 Noir |
Samsung PL210 Noir + Carte mémoire Lexar MicroSDHC 8 Go |
Samsung Player mini 2 c3310 - Gris Métal |
Samsung Port parallèle ML-PAR100 pour imprimante |
Samsung PS43E450 |
Samsung PS43E490 3D |
Samsung PS43E490 3D + Console Xbox 360 4 Go |
Samsung PS51E450 |
Samsung PS51E490 3D |
Samsung PS51E530 |
Samsung Q3 noir 4 Go |
Samsung Q3 rose 4 Go |
Samsung RC530-S03FR 15,6" LED |
Samsung RF712 E7P-C7261 17,3" LED 3D Blu-Ray USB 3.0 + lunettes |
Samsung S19A100N Moniteur 18,5" - Flat Panel Display |
Samsung S22B150N 21,5" LED |
Samsung S22B350H 21,5" LED |
Samsung S23A750D 23" LED 3D |
Samsung S23B350H 23" LED |
Samsung S23B550V Moniteur 23" LED |
Samsung S24B300HL Moniteur 23,6" LED |
Samsung S27B350H 27" LED |
Samsung SCX-3405F - Imprimante Multifonctions |
Samsung SCX-3405FW - Imprimante Multifonctions WiFi & Ethernet |
Samsung SCX-3405 - Imprimante Multifonctions |
Samsung SCX-3405W - Imprimante Multifonctions WiFi |
Samsung SCX-4200A |
Samsung SCX-4729FD - Imprimante Multifonctions Ethernet |
Samsung SCX-4729FW - Imprimante Multifonctions Ethernet & WiFi |
Samsung SCX-5737FW - Imprimante Multifonctions Ethernet |
Samsung SE208AB Graveur DVD externe USB 2.0 |
Samsung SE-218BB graveur DVD externe ultra slim USB 2.0 |
Samsung SLB07A pour ST50 |
Samsung SLB-11A pour Samsung WB1000 |
Samsung ST200F Noir - WiFi |
Samsung ST200F Rouge - WiFi |
Samsung ST200F Violet - WiFi |
Samsung ST65 Noir |
Samsung ST65 Rouge |
Samsung ST66 Noir |
Samsung ST77 Blanc |
Samsung ST77 Noir |
Samsung ST77 Rouge |
Samsung ST77 Violet |
Samsung ST88 Noir |
Samsung station d'accueil |
Samsung station d'accueil HD2 |
Samsung Station d'accueil pour tablette Galaxy Tab 8,9" |
Samsung station d'accueil SSD-760 E2/EUR |
Samsung SyncMaster C23A550U 23" LED |
Samsung SyncMaster C23A750X 23" LED |
Samsung Syncmaster S23A700D 23" LED 3D |
Samsung Syncmaster T22A550 21,5" LED Tuner TNT HD |
Samsung Système de vidéosurveillance Baby Monitor SEW-3022WP/ EX |
Samsung T22A300 21.5" Tuner TNT HD |
Samsung T22B300EW 21,5" LED Tuner TNT HD |
Samsung T24B301 24" LED Tuner TNT HD |
Samsung T27A550 27" LED Tuner TNT HD |
Samsung Toner MLT-D101S pour imprimantes Samsung SCX-3405 & ML-2165 - Noir |
Samsung UE19ES4000 LED |
Samsung UE22ES5000 LED |
Samsung UE22ES5410 LED |
Samsung UE26EH4000 LED |
Samsung UE26EH4500 LED |
Samsung UE32EH4000 LED |
Samsung UE32EH5000 LED |
Samsung UE32ES5500 LED |
Samsung UE32ES6300 LED 3D |
Samsung UE32ES6300 LED 3D + Console Xbox 360 4 Go |
Samsung UE32ES6710 LED 3D blanc |
Samsung UE37ES5500 LED |
Samsung UE40D5000 LED |
Samsung UE40D6500 LED 3D |
Samsung UE40EH5000 LED |
Samsung UE40ES5500 LED |
Samsung UE40ES6300 LED 3D |
Samsung UE40ES6300 LED 3D + Console Xbox 360 4 Go |
Samsung UE40ES6710 LED 3D |
Samsung UE46EH5000 LED |
Samsung UE46ES5500 LED |
Samsung UE46ES6300 LED 3D |
Samsung UE46ES6300 LED 3D + Console Xbox 360 4 Go |
Samsung UE46ES6710 LED 3D blanc |
Samsung UE46ES8000 LED 3D |
Samsung UE55ES6300 LED 3D |
Samsung UE55ES6300 LED 3D + Console Xbox 360 4 Go |
Samsung UE60ES6100 LED 3D |
Samsung ultrabook NP530U3B 13,3" - Aluminium + Microsoft Explorer Touch Mouse - Souris BlueTrack sans fil |
Samsung ultrabook NP530U3B 13,3" LED USB 3.0 - Aluminium |
Samsung ultrabook NP530U3B 13,3" LED USB 3.0 - Aluminium+ Samsonite Sac pour ordinateur portable 14,1" S Noir |
Samsung ultrabook NP530U3B-A02 13,3" LED USB 3.0 + CaseLogic Sacoche double pour ordinateurs 14" & tablettes 10,1" - Grise |
Samsung Ultrabook NP530U3C 13,3" HD LED - Série 5 Ultra - Marron |
Samsung Ultrabook NP530U3C 13,3" HD LED - Série 5 Ultra - Rose |
Samsung Viseur électronique EVF10 |
Samsung Wave 575 |
Samsung WB150F Blanc - WiFi |
Samsung WB150F Noir - WiFi |
Samsung WB690 Noir |
Samsung WB700 Noir |
Samsung WB850F Noir - WiFi - GPS |
Samsung WMN250M accroche murale |
Samsung XE700T1A-A02FR 11,6" 64 Go SSD |
Samsung YP-F3 bleu 2 Go |
Samsung YP-F3 rose 2 Go |
Samsung YP-Q3 rose 8 Go |
Samsung YP-Q3 rose 8 Go + Casque JVC HA-S155-P rose |
Samsung YP-U6 noir 2 Go |
Samsung YP-U6 noir 4 Go |
Samsung YP-U6 rose 2 Go |
Samsung YP-U6 rose 4 Go |
Samsung YP-Z3 blanc 4 Go |
Samsung YP-Z3 bleu 4 Go |
Samsung YP-Z3 rose 4 Go |
Samyang 14 mm f/2.8 Aspherical IF ED UMC; Monture Samsung NX |
Samyang 35 mm f/1.4 AS UMC; Monture Samsung NX |
Samyang Fish-eye 8 mm f/3.5 Aspherical IF MC; Monture Samsung Type NX |
Tablette Samsung Galaxy S WiFi 3,6" 8 Go |
Tablette Samsung Galaxy S WiFi 3,6" 8 Go + Casque weSC Conga Matte noir |
Tablette Samsung Galaxy S WiFi 4,2" 8 Go |
Tablette Samsung Galaxy S WiFi 5" 8 Go |
T'nB Coque Clip On pour Samsung Galaxy SII - New York |
Toner Samsung CLT-C4072S - Cyan |
Toner Samsung CLT-C4092S Cyan |
Toner Samsung CLT-K4072S - Noir |
Toner Samsung CLT-K4092S Noir |
Toner Samsung CLT-M4072S - Magenta |
Toner Samsung CLT-M4092S Magenta |
Toner Samsung CLT-P4092C - Pack de 4 Toners |
Toner Samsung CLT-Y4072S - Jaune |
Toner Samsung CLT-Y4092S Jaune |
Toner Samsung MLT-D1042S - Noir |
We Digital by Samsung - Silver We 1 To USB 2.0 |
We Digital by Samsung - Silver WE 2 To USB 2.0 |
Xqisit Coque iPlate Glossy pour Samsung Galaxy S3 - Blanche |
Xqisit Coque iPlate Style pour Samsung Galaxy S3 - Transparente/Blanche |
Xqisit Coque iPlate Style pour Samsung Galaxy S3 - Transparente/Noire |
Xqisit Coque Soft Grip pour Samsung Galaxy S3 - Blanche |
Xqisit Coque Soft Grip pour Samsung Galaxy S3 - Noire |
Xqisit Etui Flipcover pour Samsung Galaxy S3 - Blanc |
Xqisit Etui Flipcover pour Samsung Galaxy S3 - Noir |
Samsung - Aspirateur robot Navibot SR8845
Samsung - Aspirateur sans sac EcoStyle SC86G0 gris foncé/fuchsia
Samsung - Aspirateur sans sac SC4780 noir
Samsung - Four micro-ondes MW73B - blanc
SAMSUNG - Micro ondes 36 L - Micro ondes 36 L - CP1395ES
SAMSUNG - Micro ondes 42 L - Micro ondes 42 L - CQ1570U
Samsung - Micro-ondes combiné CE117PT-B
SAMSUNG - Micro-ondes Grill simultané GS89F-1SP
Samsung 305U1A 11,6" LED
Samsung 305U1A 11,6" LED + Office Famille et Etudiant 2010 1 poste
Samsung Aspirateur sans sac EcoStyle SC86H0 gris clair/bleu
Samsung B1930HD 18.5" LCD TNT HD
Samsung B5722 Double SIM
Samsung Bac papier supplémentaire ML-S3710A - 520 feuilles
Samsung Batterie ED-BP1310
Samsung batterie IA-BH130LB
Samsung batterie IA-BP420E
Samsung batterie IA-BP85ST
Samsung batterie SLB-10A
Samsung batterie SSB-690 ELS
Samsung BD-E5300
Samsung BD-E5500 3D
Samsung BD-E8300 3D
Samsung C3050 Stratus
Samsung Câble Adaptateur HDTV pour Galaxy Tab 8.9" / 10.1"
Samsung Câble data pour téléphones mobiles Samsung
Samsung Caméra additionnelle de vidéosurveillance SEB-1015RWP EX
Samsung caméra Skype CY-STC1100
Samsung CB20A12
Samsung Ch@t335 - GT-S3350 - Noir
Samsung Chargeur allume-cigares micro-USB
Samsung chargeur de voyage pour SGH-P260 et SGH-G600 - Modèle Noir
Samsung Chargeur secteur de voyage micro-USB
Samsung CLP-325 + Toner Samsung CLT-K4072S Noir
Samsung CLP-325 + Toner Samsung CLT-K4072S Noir
Samsung CLP-325 WiFi
Samsung CLP-325 WiFi + Toner Samsung CLT-K4072S Noir + MCL Samar câble imprimante USB 2.0
Samsung CLP-620ND - Imprimante Ethernet
Samsung CLP-C300A
Samsung CLP-K300A
Samsung CLP-M300A
Samsung CLP-Y300A
Samsung CLX-3185 + Toner Samsung CLT-K4072S Noir
Samsung CLX-3185 + Toner Samsung CLT-K4072S Noir
Samsung CLX-3185 + Toner Samsung CLT-K4072S Noir
Samsung CLX-3185FW WiFi
Samsung CLX-3185FW WiFi + Toner Samsung CLT-K4072S Noir + MCL Samar câble imprimante USB 2.0
Samsung CLX-3185N Ethernet
Samsung CLX-3185W - Imprimante Multifonctions WiFi & Ethernet
Samsung CLX-6220FX - Imprimante Multifonctions Ethernet
Samsung Coque silicone Croisillons pour nexus S
Samsung CY-SMN1000D meuble TV
Samsung Disque Dur interne SSD 128 Go MZ-7PC128D 830 Series
Samsung Disque Dur interne SSD 128 Go MZ-7PC128N 830 Series
Samsung Disque Dur interne SSD 256 Go MZ-7PC256D 830 Series
Samsung Disque Dur interne SSD 256 Go MZ-7PC256N 830 Series
Samsung Disque Dur interne SSD 64 Go MZ-7PC064D 830 Series
Samsung dongle Wi-Fi WIS12ABGNX
Samsung DP7000A3B 23" LED Tactile USB 3.0
Samsung Duo de 2 coques pour Samsung Galaxy II I9100 - 1 Noire + 1 Camel
Samsung Duo de 2 coques pour Samsung Galaxy II I9100 - 1 Noire matelassée + 1 Rose
Samsung DV300F Argent/Rouge - WiFi
Samsung DV300F Noir - WiFi
Samsung E1150 - Silver
Samsung E2550
Samsung EcoBlue SC61E0 bleu azur
Samsung ES30 Noir
Samsung ES30 Noir + Carte SD 2 Go
Samsung Etui coque pour Galaxy Note - Noir
Samsung Etui cuir pour Galaxy S II - Noir
Samsung Etui flap en cuir pour Samsung Galaxy II I9100 - Noir
Samsung Eui cuir pour i9000 Galaxy S
Samsung Flash SEF15A
Samsung Flash SEF20A
Samsung Galaxy Ace s5830 (sous Androïd)
Samsung Galaxy Mini (sous Android)
Samsung Galaxy Note
Samsung Galaxy Note - Blanc
Samsung Galaxy Note - Rose
Samsung Galaxy S2 (I9100G) - Blanc
Samsung Galaxy S2 (I9100G) - Noir
Samsung Galaxy Tab 10,1" TFT Blanc 32 Go + Western Digital My Book Live 1 To Ethernet
Samsung Galaxy Tab 10,1" TFT Blanc 32 Go Wifi
Samsung Galaxy Tab 10,1" TFT Noir 16 Go 3G
Samsung Galaxy Tab 8,9" TFT Blanc 32 Go Wifi
Samsung Galaxy Xcover s5690 (sous Androïd) - Smartphone Samsung Solide certifié IP67
Samsung Galaxy Y Pro B5510 (sous Androïd)
Samsung Galaxy Y Young s5360 (sous Androïd)
Samsung Graveur DVD Externe Wifi - SE-208BW - Noir
Samsung Housse Folio pour Galaxy Tab 10,1"
Samsung Housse Folio pour Galaxy Tab 8,9"
Samsung HT-D330
Samsung HT-D350
Samsung HT-D423
Samsung HT-D4500
Samsung HT-D5000 3D
Samsung HT-E4200 3D
Samsung HT-E4500 3D
Samsung HT-E5200 3D
Samsung HT-ES6200 3D WiFi
Samsung HW-E450
Samsung I9103 Galaxy R (sous Android)
Samsung Kit de connexion USB & SD pour Galaxy Tab 10.1"
Samsung Kit de vidéosurveillance tout-en-un SDE-3003P/EX
Samsung Kit de vidéosurveillance tout-en-un SME-4220
Samsung Kit Etui + Clavier Bluetooth pour Galaxy Tab 10,1" - Brun foncé
Samsung kit HDMI
Samsung kit HDMI
Samsung kit papier 10 x 15 cm
Samsung kit piéton filaire stéréo Jack 3,5 mm
Samsung LE40D550
Samsung Lot de 2 protections d'écran pour Galaxy S2 - Transparente/Miroir
Samsung Lot de 2 Protections d'écran pour i9000 Galaxy S
Samsung Lunettes 3D SSG-3050GB
SAMSUNG ME106V-SX
Samsung ME82V Micro-onde monofonction
SAMSUNG ME82V-SX
SAMSUNG Micro ondes MW87Y
SAMSUNG Micro-ondes combiné CE117APT B
SAMSUNG Micro-ondes combiné CE137NEMX
SAMSUNG Micro-ondes FW113T002
Samsung ML-1630/SCX4500
Samsung ML-2010D3
Samsung ML-2165 - Imprimante Monochrome
Samsung ML-2165W - Imprimante WiFi
Samsung ML-2545 - Imprimante Monochrome
Samsung ML-2955DW - Imprimante Ethernet & WiFi
Samsung ML-2955ND - Imprimante Ethernet
Samsung ML-3310D - Imprimante Monochrome
Samsung ML-3710DW - Imprimante Ethernet & WiFi
Samsung MLT-D1052S
Samsung MLT-D1082S
Samsung MLT-D1092S
Samsung MM-D430D
Samsung MV800 Noir
Samsung MV800 Noir + Etui Zadig & Voltaire Noir
Samsung NP300E7A-S03FR 17,3" LED
Samsung NP700Z5A-S02FR 15,6" LED
Samsung NX 60 mm f/2.8 ED OIS SSA Macro i-Function; dédié Boîtiers Hybrides
Samsung NX 85 mm f/1.4 ED SSA i-Function; dédié Boîtiers Hybrides
Samsung NX Pancake 16 mm f/2.4 i-Function; dédié Boîtiers Hybrides
Samsung NX Pancake 20 mm f/2.8 i-Function; dédié Boîtiers Hybrides
Samsung NX Pancake 30 mm f/2.0; dédié Boîtiers Hybrides
Samsung NX200 Noir + Obj. Samsung NX 18 - 55 mm f/3.5 - 5.6 OIS + Flash SEF-8A NG8
Samsung NX200 Noir + Obj. Samsung NX 20 - 50 mm f/3.5 - 5.6 ED i-Function + Flash SEF-8A NG8
Samsung Oreillette Bluetooth HM1200
Samsung Pack d'accessoire pour Galaxy S II I9100
Samsung Pack étui cuir + chargeur + protection d'écran pour Galaxy S
Samsung PL170 Noir
Samsung PL210 Noir
Samsung PL210 Noir + Carte mémoire Lexar MicroSDHC 8 Go
Samsung PL90 Noir et Rouge
Samsung Player mini 2 c3310 - Gris Métal
Samsung Player Mini C3300 - Noir
Samsung Port parallèle ML-PAR100 pour imprimante
Samsung PS43D450
Samsung PS43E450
Samsung PS43E490 3D
Samsung PS51E450
Samsung PS51E490 3D
Samsung PS59D530
Samsung Q3 rose 4 Go
Samsung RC530-S03FR 15,6" LED
Samsung RC730-S06FR 17,3" LED
Samsung RF712 E7P-C7261 17,3" LED 3D Blu-Ray USB 3.0 + lunettes
Samsung S22A300B 21,5" TFT
Samsung S22B350H 21,5" LED
Samsung S23A750D 23" LED 3D
Samsung S23B350H 23" LED
Samsung S24B300HL Moniteur 23,6" LED
Samsung S27B350H 27" LED
Samsung SC4340 noir ébène
Samsung SC4790 - Aspirateur sans sac - traineau - rouge
Samsung SCX-3405 - Imprimante Multifonctions
Samsung SCX-3405F - Imprimante Multifonctions
Samsung SCX-3405FW - Imprimante Multifonctions WiFi & Ethernet
Samsung SCX-3405W - Imprimante Multifonctions WiFi
Samsung SCX-4200A
Samsung SCX-4729FD - Imprimante Multifonctions Ethernet
Samsung SCX-4729FW - Imprimante Multifonctions Ethernet & WiFi
Samsung SCX-5737FW - Imprimante Multifonctions Ethernet
Samsung SE-084D graveur DVD externe slim USB 2.0
Samsung SE208AB Graveur DVD externe USB 2.0
Samsung SLB07A pour ST50
Samsung SLB-11A pour Samsung WB1000
Samsung ST65 Noir
Samsung ST65 Rouge
Samsung station d'accueil
Samsung station d'accueil HD2
Samsung Station d'accueil pour tablette Galaxy Tab 10,1"
Samsung Station d'accueil pour tablette Galaxy Tab 8,9"
Samsung station d'accueil SSD-760 E2/EUR
Samsung SyncMaster C23A550U 23" LED
Samsung SyncMaster C23A750X 23" LED
Samsung Syncmaster S23A700D 23" LED 3D
Samsung SyncMaster S24A350H 24" LED
Samsung Syncmaster T22A550 21,5" LED Tuner TNT HD
Samsung Système de vidéosurveillance Baby Monitor SEW-3022WP/ EX
Samsung T22A350 21,5" LED Tuner TNT
Samsung Toner MLT-D101S pour imprimantes Samsung SCX-3405 & ML-2165 - Noir
Samsung UE19D4010 LED
Samsung UE19ES4000 LED
Samsung UE22ES5000 LED
Samsung UE22ES5410 LED
Samsung UE26EH4000 LED
Samsung UE26EH4500 LED
Samsung UE32D5000 LED
Samsung UE32EH4000 LED
Samsung UE32EH5000 LED
Samsung UE32ES5500 LED
Samsung UE32ES6300 LED 3D
Samsung UE32ES6710 LED 3D blanc
Samsung UE40D5000 LED
Samsung UE40D5710 LED
Samsung UE40D6500 LED 3D
Samsung UE40EH5000 LED
Samsung UE40ES5500 LED
Samsung UE40ES6300 LED 3D
Samsung UE40ES6710 LED 3D
Samsung UE46EH5000 LED
Samsung UE46ES5500 LED
Samsung UE46ES6300 LED 3D
Samsung UE46ES6710 LED 3D blanc
Samsung UE55ES6300 LED 3D
Samsung ultrabook NP530U3B-A02 13,3" + Microsoft Explorer Touch Mouse - Souris BlueTrack sans fil
Samsung ultrabook NP530U3B-A02 13,3" LED USB 3.0
Samsung ultrabook NP530U3B-A02 13,3" LED USB 3.0 + CaseLogic Sacoche double pour ordinateurs 14" & tablettes 10,1" - Grise
Samsung ultrabook NP530U3B-A02 13,3" LED USB 3.0 + Samsonite Sac pour ordinateur portable 14,1" S Noir
Samsung ultrabook NP530U4B-S01FR 14" LED + Microsoft Explorer Touch Mouse - Souris BlueTrack sans fil
Samsung ultrabook NP530U4B-S01FR 14" LED USB 3.0
Samsung ultrabook NP530U4B-S01FR 14" LED USB 3.0 + CaseLogic Sacoche double pour ordinateurs 14" & tablettes 10,1" - Grise
Samsung ultrabook NP530U4B-S01FR 14" LED USB 3.0 + Samsonite Sac pour ordinateur portable 14,1" S Noir
Samsung Viseur électronique EVF10
Samsung WB150F Blanc - WiFi
Samsung WB150F Noir - WiFi
Samsung WB700 Noir
Samsung WB750 Noir
Samsung WIS09ABGN LinkStick WLAN-Adapter
Samsung WMN250M accroche murale
Samsung YP-F3 bleu 2 Go
Samsung YP-F3 noir 2 Go
Samsung YP-F3 rose 2 Go
Samsung YP-Q3 rose 8 Go
Samsung YP-Q3 rose 8 Go + Casque JVC HA-S155-P rose
Samsung YP-U6 noir 2 Go
Samsung YP-U6 noir 4 Go
Samsung YP-U6 rose 2 Go
Samsung YP-U6 rose 4 Go
Samsung YP-Z3 blanc 4 Go
Samsung YP-Z3 bleu 4 Go
Samsung YP-Z3 rose 4 Go
SyncMaster 460UTn-2, 460UTn2-UD2, 460UT-2, 460UTn-B, 460UT-B
LCD Display
User Manual
The color and the appearance may differ depending on the
product, and the specifications are subject to change
without prior notice to improve the performance.Safety Instructions
Notational
Note
These safety instructions must be followed to ensure your safety and prevent property damage.
Make sure to read the instructions carefully and use the product in the correct manner.
Warning / Caution
Failure to follow directions noted by this symbol could result in bodily
harm or damage to the equipment.
Note
Prohibited
Important to read and understand at all times
Do not disassemble
Disconnect the plug from the
outlet
Do not touch
Ground to prevent an electric
shock
Power
When not used for extended period of time, set your computer to DPM.
If using a screen saver, set it to active screen mode.
The images here are for reference only, and are not applicable in all cases
(or countries).
Shortcut to Anti-Afterimage Instructions
Do not use a damaged power cord or plug or a damaged or
loose power outlet.
• Otherwise, this may result in electric shock or fire.
Do not touch the power plug with wet hands when removing or
plugging the plug into the outlet.
• Otherwise, this may result in electric shock.
Make sure to connect the power cord to a grounded power outlet.
• Otherwise, it may result in electric shock or personal injury. Ensure that the power plug is plugged into the power outlet
firmly and correctly.
• Otherwise, this may result in fire.
Do not forcefully bend or pull the power plug and do not place
any heavy material on it.
• Otherwise, this may result in fire.
Do not connect multiple appliances to the same power outlet.
• Otherwise, this may cause fire due to overheating.
Do not disconnect the power cord while using the product.
• Otherwise, this may result in damage to the product due to
electric shock.
To disconnect the apparatus from the mains, the plug must be
pulled out from the mains socket, therefore the mains plug shall
be readily operable.
• Otherwise, this may cause electric shock or fire.
Use only the power cord provided by our company. Do not use
the provided power cord of another product.
• Otherwise, this may result in fire or electric shock.
Connect the power plug to a wall outlet that can be easily
reached.
• When a problem occurs with the product, you must unplug the
power plug to cut the power off completely. You cannot cut the
power off completely using only the power button on the product.
Installation
Be sure to contact an authorized Service Center when installing your
monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24
hours such as at airports, train stations etc.
Failure to do so may cause serious damage to your monitor.
Ensure that at least two persons lift and move the product.
• Otherwise, it may be dropped and cause personal injury, and/
or damage the product.
When installing the product in a cabinet or rack, make sure that
the front end of the bottom of the product does not project out.
• Otherwise, it may fall or cause personal injury.
• Use a cabinet or rack of a size appropriate to the product.
Safety Instructions DO NOT PLACE CANDLES, MOSQUITO REPELLANT, CIGARETTES AND ANY HEATING APPLIANCES NEAR THE
PRODUCT.
• Otherwise, this may result in fire.
Keep heating appliances as far away from the power cord or the
product as possible.
• Otherwise, this may result in electric shock or fire.
Do not install it in a badly ventilated location such as a bookcase
or closet.
• Otherwise, this may result in fire due to an increase in the internal temperature.
When putting the product down, make sure to put it down softly.
• Otherwise, this may result in damage to the screen display.
Do not place the front of the product on the floor.
• Otherwise, this may result in damage to the screen display.
Ensure that an authorized installation company installs the wall
mount.
• Otherwise, it may fall and cause personal injury.
• Make sure to install the specified wall mount.
Install your product in a well ventilated location. Ensure that
there is a clearance of more than 4 inches (10 cm) from the wall.
• Otherwise, it may result in fire due to an increase in the internal
temperature.
Ensure that the packaging vinyl is kept away from children.
• Otherwise, it may result in serious harm (suffocation) if children
play with it.
If the height of your monitor is adjustable, do not place any object or part of your body on the stand when lowering it.
• This may cause damage to the product or the person carrying
it.
Clean
When cleaning the monitor case or the surface of the TFT-LCD screen,
wipe with a slightly moistened, soft cloth.
Do not spray cleaner directly onto the surface of the product.
• Otherwise, this may result in the discoloration and distortion of
the structure and the screen surface may peel off.
Safety Instructions
Edible oil, such as soybean oil, can damage or deform the product. Do not install the product in a kitchen or near a kitchen counter. When cleaning the power plug pins or dusting the power outlet,
clean it with a dry cloth.
• Otherwise, it may result in fire.
When cleaning the product, make sure to disconnect the power
cord.
• Otherwise, it may result in electric shock or fire.
When cleaning the product, disconnect the power cord and
clean it with a soft, dry cloth.
• (Do not use chemicals such as wax, benzene, alcohol, thinner,
mosquito repellant, lubricant, or cleaner.) These may change
the appearance of the product surface and peel off the indication labels on the product.
Since the product housing is easily scratched, make sure to use
the specified cloth only.
When cleaning the product, do not spray water directly onto the
main body of the product.
• Ensure that water does not enter the product and that it is not
wet.
• Otherwise, this may result in electric shock, fire or a malfunction.
Others
The product is a high voltage product. Do not disassemble, repair or modify the product yourself.
• Otherwise, this may result in electric shock or fire. If the product
needs to be repaired, contact a Service Center.
If there is a strange smell or a strange sound or smoke is coming
from the product, disconnect the power plug immediately and contact a Service Center.
• Otherwise, this may result in electric shock or fire.
Do not place this product in a location exposed to moisture, dust,
smoke, water, or in a car.
• Otherwise, this may result in electric shock or fire.
When you drop the product or the case is broken, turn the power
off and disconnect the power cord. Contact a Service Center.
• Otherwise, this may result in electric shock or fire.
Safety Instructions If thunder or lightning is occurring, do not touch the power cord
or antenna cable.
• Otherwise, this may result in electric shock or fire.
Do not try to move the monitor by pulling only the wire or the
signal cable.
• Otherwise, it may fall and result in electric shock, damage to
the product or fire due to damage to the cable.
Do not lift or move the product back and forwards or right and
left while only holding the power cord or signal cables.
• Otherwise, it may fall and result in electric shock, damage to
the product or fire due to damage to the cable.
Make sure that the ventilating opening is not blocked by a table
or curtain.
• Otherwise, it may result in fire due to an increase in the internal
temperature.
Do not place any containers containing water, vases, flowerpots, medicines as well as any metal on the product.
• If water or a foreign material enters the product, disconnect the
power cord and contact a Service Center.
• This may result in a product malfunction, electric shock, or fire.
Do not use or keep combustible spray or flammable material
near the product.
• Otherwise, this may result in an explosion or fire.
Do not insert any metal, such as chopsticks, coins, pins and
steel, or flammable objects, such as matches or paper, inside the
product (through the ventilating openings, input and output terminals, etc).
• If water or foreign material enters the product, disconnect the
power cord and contact a Service Center.
• Otherwise, this may result in electric shock or fire.
When using a fixed screen for a long time, an afterimage or stain
may occur.
• If you are not using your product for a long period of time, put
it into sleep mode or use a moving screen saver.
Set a resolution and frequency appropriate to the product.
• Otherwise, your eyesight may be damaged.
When using headphones or earphones, do not turn the volume
too high.
• Having the sound too loud may damage your hearing.
Safety Instructions To avoid eyestrain, do not sit too close to the product.
Take a rest for at least five (5) minutes after using the monitor
for one (1) hour.
This reduces eye fatigue.
Do not install it in an unstable location such as an unstable rack
or uneven surface or a location exposed to vibrations.
• Otherwise, it may fall and cause personal injury and/or damage
the product.
• If you use the product in a location exposed to vibrations, it may
damage the product and result in fire.
When moving the product, turn the power off and disconnect
the power plug, antenna cable, and all the cables connected to the
product.
• Otherwise, it may result in electric shock or fire.
Ensure that children do not hang onto the product or climb up
onto the product.
• The product may fall and cause personal injury or death.
If you do not use the product for a long period of time, disconnect
the power cord from the power outlet.
• Otherwise, this may result in overheating or fire due to dust,
and may result in fire due to electric shock or leakage.
Do not place any heavy items or toys or confectionery, such as
cookies etc. that may attract the attention of children and to the
product.
• Your children may hang onto the product causing it to fall and
this may result in personal injury or death.
Be careful that children do not place the battery in their mouths
when removed from the remote control. Place the battery in a location that children or infants cannot reach.
• If children have had the battery in their mouths, consult your
doctor immediately.
When replacing the battery, insert it with the right polarity (+, -).
• Otherwise, the battery may become damaged or it may cause
fire, personal injury or damage due to leakage of the internal
liquid.
Use only the specified standardized batteries, and do not use a
new battery and a used battery at the same time.
• Otherwise, the batteries may be damaged or cause fire, personal injury or damage due to a leakage of the internal liquid.
Safety Instructions The batteries (and rechargeable batteries) are not ordinary refuse and must be returned for recycling purposes. The customer
is responsible for returning the used or rechargeable batteries for
recycling.
• The customer can return used or rechargeable batteries to a
nearby public recycling center or to a store selling the same
type of the battery or rechargeable battery.
Do not place the product in a location exposed to direct sunlight
or near any heat such as a fire or heater.
• This may reduce the lifetime of the product, and may result in
fire.
Do not drop any objects onto the product or cause any impact
to the product.
• Otherwise, this may result in electric shock or fire.
Do not use a humidifier near the product.
• Otherwise, this may result in electric shock or fire.
When there is a gas leak, do not touch the product or the power
plug; ventilate immediately.
• If a spark occurs, it may cause an explosion or fire.
If the product has been turned on for a long time, the display
panel becomes hot. Do not touch it.
Keep the small accessories in a location out of the reach of
children.
Be careful when adjusting the angle of the product or the height
of the stand.
• This may result in personal injury as your hand or fingers may
become caught.
• Also, if you tilt the product too far, it may fall and cause personal
injury.
Do not install the product in a location low enough for children
to reach.
• Otherwise, it may fall and result in personal injury.
• Since the front part of the product is heavy, install the product
on a level and stable surface.
Safety Instructions Do not put any heavy objects on the product.
• This may result in personal injury and/or damage to the product.
Safety InstructionsIntroduction
Package Contents
Checking the Contents of the Package
Remove the lock from the package box, as shown in the figure above.
Lift up the package box by
holding the grooves on
both sides of the package
box.
Check the contents of the
package.
Remove the Styrofoam
and vinyl cover.
Note
• After unpacking the package, make sure to check the contents of the package.
• Store the packaging box in case you need to move the Product later.
• If any items are missing, contact your dealer.
• Contact a local dealer to purchase optional items.
Unpacking
LCD DisplayManuals
Quick Setup Guide Warranty Card
(Not available in all locations)
User Manual
MagicInfo Software DVD
(Applicable to the
460UTn-2, 460UTn2-UD2,
460UTn-B model only)
Cables
Power Cord D-Sub Cable
Others
Remote Control
(BP59-00138B)
Batteries (AAA X 2)
(Not available in all locations)
Sold separately
Semi Stand KIT LAN Cable USB Cable
(Applicable to the
460UTn-2, 460UTn2-UD2,
460UTn-B model only)
IntroductionSold separately
RGB to BNC Cable RGB to Component Cable Network Box
(Applicable to the
460UT-2, 460UT-B model
only)
Wall Mount KIT TV Tuner Box (US Only)
Note
Accessories that can be purchased with the product vary by country.
Your LCD Display
Front
SOURCE button
Switches from PC mode to Video mode. Selects the input source that an
external device is connected to.
[PC] → [DVI] → [AV] → [Component] → [HDMI1] → [HDMI2] → [DisplayPort] → [MagicInfo] → [TV]
Note
• A TV tuner box (sold separately) must be connected to use the TV. (US
Only)
• A network box (sold separately) must be connected to use MagicInfo
with a 460UT-2, 460UT-B model.
POWER button
Use this button for turning the LCD Display on and off.
IntroductionPower indicator
Shows PowerSaver mode by blinking green
Note
See PowerSaver described in the manual for further information regarding
power saving functions. For energy conservation, turn your LCD Display
OFF when it is not needed or when leaving it unattended for long periods.
Remote Control Sensor
Aim the remote control towards this spot on the LCD Display.
Rear
Note
See the "Connections" section for details about cable connections. The LCD Display's configuration at the back may vary slightly depending on the model.
POWER S/W ON [ │ ] / OFF
Switches the LCD Display On/Off.
POWER
The power cord plugs into the LCD Display
and the wall outlet.
IR OUT/IN
Receives a signal from the remote control
and outputs the signal through Loopout when
a removable sensor board is connected.
AMBIENT SENSOR IN
Supplies power to the removable sensor
board and receives a signal from the light
sensor.
Introduction DVI OUT (LOOPOUT)
• Connect a monitor to another monitor
through a DVI, DVI to HDMI cable.
• Connect a DVI or DVI-HDMI cable to [DVI
OUT (LOOPOUT)] on the product and
[DVI IN] or [HDMI IN] on another monitor.
• HDMI and network signals sent via the
[DVI OUT(LOOPOUT)] port are displayed on the second display which has
the [DVI IN] port.
Note
• The Loopout function can be used to duplicate the screen of the primary display.
Connect [DVI OUT] on the primary display to [DVI IN] or [HDMI] on another
display.
• A maximum of 100 monitors can be connected to DVI-Loopout (using a 2m-long
DVI cable). Up to HD resolution can be
supported. Compatible input sources include DVI IN, HDMI IN 1, and HDMI IN 2
(MagicInfo).
• The status of the cable may have a great
effect on the Loopout performance.
RGB/COMPONENT IN (PC/COMPONENT Connection Terminal (Input))
• Connect the [RGB/COMPONENT IN]
port on the monitor to the RGB port on the
PC using the D-SUB cable.
• Connect the [RGB/COMPONENT IN]
port on the monitor to the COMPONENT
port on the external device using the RGB
to COMPONENT cable.
• Connect the [RGB/COMPONENT IN]
port on the monitor to the BNC port on the
PC using the RGB to BNC cable.
DVI IN (PC Video Connection Terminal)
Connect the [DVI IN] port on the monitor to
the DVI port on the PC using the DVI cable.
RGB/DVI/DP/HDMI AUDIO IN (PC/DVI/
DP/HDMI Audio Connection Terminal (Input))
IntroductionConnect the [RGB/DVI/DP/HDMI AUDIO
IN] terminal of the monitor and the speaker
output terminal of your computer's sound
card using a stereo cable (sold separately).
DP IN
Receives a signal from the Display port.
Connect a DP cable to [DP IN] on the product
and DP IN on another display.
AV/COMPONENT AUDIO IN [R-AUDIOL]
Connect the [AV/COMPONENT AUDIO IN
[R-AUDIO-L]] port on the monitor to the audio
output port on the PC or on the external device using an audio cable.
AV IN
Connect the [AV IN] terminal of your monitor
to the video output terminal of the external
device using a VIDEO cable.
AUDIO OUT
Connect a headphone or an External speaker.
DC OUT
Make sure to use connecting [DC OUT] terminal to the authorized TV-Tuner Box. (US
Only)
Otherwise, this may result in damage
to the product.
HDMI IN 1
• Connect the [HDMI IN 1] terminal at the
back of your LCD Display to the HDMI
terminal of your digital output device using a HDMI cable.
• Up to HDMI 1.3 can be supported.
Note
• A normal external device (DVD player or
camcorder, etc.) or a TV tuner box can be
connected to the [HDMI IN 1] terminal.
Introduction• To use a TV tuner box (US Only), make
sure to connect it to the [HDMI IN 1] terminal.
HDMI IN 2 (MAGICINFO)
• Connect the [HDMI IN 2 (MAGICINFO)]
terminal at the back of your LCD Display
to the HDMI terminal of your digital output
device using a HDMI cable.
• Up to HDMI 1.3 can be supported.
Note
The MAGICINFO OUT port must be connected to the [HDMI IN 2 (MAGICINFO)] port.
RJ 45 MDC (MDC PORT)
MDC(Multiple Display Control) Program Port
Connect the LAN cable to [RJ45 MDC] on the
product and LAN on the PC. To use an MDC,
the MDC program must be installed on the
PC.
Note
Go to Multi Control and select RJ45 MDC
as the MDC Connection.
RS232C OUT/IN (RS232C Serial PORT)
MDC(Multiple Display Control) Program Port
Connect a serial cable (cross type) to
[RS232C] on the product and RS232C on the
PC. To use an MDC, the MDC program must
be installed on the PC.
Note
Go to Multi Control and select RS232C
MDC as the MDC Connection.
Introduction RGB OUT
MagicInfo video output port
Note
Applicable to the 460UTn-2, 460UTn2-UD2,
460UTn-B model only.
MAGICINFO OUT
Outputs MagicInfo DP signals. It should be
connected to [HDMI IN 2 (MAGICINFO)] via
a DP to HDMI cable.
LAN (LAN Connection Terminal)
Connects to a LAN cable to allow Internet or
network access in MagicInfo mode.
Note
Applicable to the 460UTn-2, 460UTn2-UD2,
460UTn-B model only.
USB (USB Connection Terminal)
Keyboard / Mouse, Mass Storage Device
Compatible.
Note
Applicable to the 460UTn-2, 460UTn2-UD2,
460UTn-B model only.
Kensington Lock slot
A Kensington Lock is an anti-theft device that
enables users to lock the product so that they
can safely use it in public locations. Since the
shape and usage of the locking device may
differ depending on the model and the manufacturer, for more information, refer to the
User Manual supplied with the locking device
for more information.
To lock the product, follow these
steps:
1. Wrap the Kensington lock cable around
a large, stationary object such as a desk
or chair.
2. Slide the end of the cable with the lock
attached through the looped end of the
Kensington lock cable.
Introduction3. Insert the Kensington Lock into the security slot ( ) on the back of the display.
4.
Lock the lock ( ).
Note
• You must purchase the Kensington Lock
separately.
• These are general instructions. For exact
instructions, see the User Manual supplied with the locking device.
• You can purchase the locking device
from an electronics store, an online shop,
or our service center.
Note
See the "Connections" section for details about cable connections.
Remote Control
Note
• The performance of the remote control may be affected by a TV or other electronic device
operating near the LCD Display , causing a malfunction due to interference with the frequency.
• A TV tuner box (sold separately) must be connected to use the TV. (US Only)
POWER
OFF
Number Buttons
/ GUIDE button
+ VOL -
SOURCE
D.MENU
TOOLS
Up-Down Left-Right buttons
INFO
The Color button and the PC/DVI/HDMI/DP
selection button
TTX/MIX
MTS/DUAL
ENTER/PRE-CH
Introduction MUTE
CH/P
TV
MENU
RETURN
EXIT
MagicInfo
POWER
Turns the product On.
OFF
Turns the product Off.
Number Buttons
Used to enter the password during the OSD adjustment or
to use MagicInfo.
Press to change the channel.
/ GUIDE button
The "-" button is used to select Digital channels.
Electronic Program Guide (EPG) display.
- This function does not work for this LCD Display.
+ VOL -
Adjusts the audio volume.
SOURCE
Selects a connected external input source or MagicInfo
mode.
Press the button to change the input signal SOURCE.
Changing the SOURCE is only allowed for external devices
that are connected to the LCD Display at the time.
D.MENU
DTV menu display
- This function does not work for this LCD Display.
TOOLS
Use to quickly select frequently used functions.
- This function does not work for this LCD Display.
Up-Down Left-Right buttons
Moves from one menu item to another horizontally, vertically
or adjusts selected menu values.
INFO
Current picture information is displayed on the upper left
corner of the screen.
The Color button and the
PC/DVI/HDMI/DP selection
button
In TV mode, these buttons can be used for setting the
broadcasting announcement function of a digital channel.
You can select the PC, DVI, HDMI or DP(DisplayPort) external input directly in a mode other than TV mode.
Introduction TTX/MIX
TV channels provide written information services via teletext.
- Teletext Buttons
- This is activated when a TV tuner box is installed.
MTS/DUAL
MTSYou can select MTS (Multichannel Television Stereo) mode.
Audio Type MTS/S_Mode Default
FM Stereo Mono Mono Manual
Change
Stereo Mono ↔ Stereo
SAP Mono ↔ SAP Mono
DUALSTEREO/MONO, DUAL l / DUAL ll and MONO/NICAM
MONO/NICAM STEREO can be operated depending on the
broadcasting type by using the DUAL button on the remote
control while watching TV.
- This is activated when a TV tuner box is installed.
ENTER/PRE-CH
This button is used to return to the immediately previous
channel.
- This is activated when a TV tuner box is installed.
MUTE
Pauses (mutes) the audio output temporarily. This is displayed on the lower left corner of the screen. The audio
comes back on if MUTE or - VOL + is pressed in the Mute
mode.
CH/P
In TV mode, selects TV channels.
- This is activated when a TV tuner box is installed.
TV
Selects the TV mode directly.
- This is activated when a TV tuner box is installed.
MENU
Opens the on-screen menu and exits from the menu or
closes the adjustment menu.
RETURN
Returns to the previous menu.
EXIT
Exits from the menu screen.
MagicInfo
MagicInfo Quick Launch Button.
Note
This button is disabled for products that do not support
MagicInfo.
IntroductionMechanical Layout
Mechanical Layout
LCD Display Head
IntroductionInstallation VESA Bracket
• When installing VESA, make sure to comply with the international VESA standards.
• Purchasing VESA Bracket and Installation Information : Please contact your nearest
SAMSUNG Distributor to place an order. After your order is placed, installation professionals will visit you and install the bracket.
• At least 2 persons are needed in order to move the LCD Display.
• SAMSUNG is not responsible for any product damage or any injury caused by installation
at customer's discretion.
Dimensions
Notice
For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12
mm length.
Wall Bracket Installation
• Contact a technician for installing the wall bracket.
• SAMSUNG Electronics is not responsible for any damages to the product or harm to
customers when the installation is done by the customer.
Introduction• This product is for installing on cement walls. The product may not stay in place when
installed on plaster or wood.
Components
Only use the components and accessories shipped with the product.
Wall Bracket(1) Hinge(Left 1, Right
1)
Plastic
Hanger
(4)
Screw
(A)(11)
Screw
(B)(4)
Anchor
(11)
Wall Bracket Assembly
Note
There are two hinges(left and right). Use the correct one.
1. Insert and tighten the Captive Screw in the direction of the arrow.
When done, mount the wall bracket on the wall.
There are two hinges(left and right). Use the correct one.
A - Captive Screw
B - Wall Bracket
C - Hinge (Left)
D - Hinge (Right)
2. Before drilling into the wall, check if the length between the two locking holes at the back
of the product is correct.
IntroductionIf the length is too short or long, loosen all or some of the 4screws on the wall bracket to
adjust the length.
A - Length between the two locking holes
3. Check the installation diagram and mark the drill points on the wall. Use the 5.0 mm bit
to drill holes deeper than 35 mm. Fix each anchor in the corresponding hole. Match each
of the brackets and hinge holes to the corresponding anchor holes and insert and tighten
the 11 screws A.
To mount the product on the wall bracket
The shape of the product may vary depending on the model. (The assemblies of the plastic
hanger and the screw are the same)
1. Remove the 4 screws on the back of the product.
Introduction2. Insert the screw B into the plastic hanger.
Notice
• Mount the product on the wall bracket and make sure it is properly fixed to the left
and right plastic hangers.
• Be careful when installing the product on the bracket as fingers can be caught in the
holes.
• Make sure the wall bracket is securely fixed to the wall, or the product may not stay
in place after installation.
3. Tighten the 4 screws in step 2 (plastic hanger + screw B)to the rear holes of the product.
4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket
holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to
re-insert and tighten the safety pin (3) to securely hold the product to the bracket.
IntroductionA - LCD Display
B - Wall Bracket
C - Wall
Wall Bracket Angle Adjustment
Adjust the bracket angle to -2° before installing it on the wall.
1. Fix the product to the wall bracket.
2. Hold the product at the top in the center and pull it forward (direction of the arrow) to
adjust the angle.
Note
You can adjust the bracket angle between -2° and 15°.
Make sure to use the top center, and not the left or the right side of the product to adjust the
angle.
IntroductionConnections
Connecting a Computer
There are several ways to connect the computer to the monitor. Choose
one from the following options.
Using the D-sub (Analog) connector on the video card.
• Connect the D-sub to the 15-pin, [RGB/COMPONENT IN] port on the
back of your LCD Display and the 15 pin D-sub Port on the computer.
Using the DVI (Digital) connector on the video card.
• Connect the DVI Cable to the [DVI IN] port on the back of your LCD
Display and the DVI port on the computer.
Using the DP (Digital) connector on the video card.
• Connect the [DP IN] port on the LCD Display to the DP port on the PC
using the DP cable. Note
Select HDMI2 (only with a 460UT-2, 460UT-B model) or HDMI1 as an input
source when connected to the PC via an HDMI cable.
To obtain normal picture and audio from the PC, HDMI2 (only with a
460UT-2, 460UT-B model) or HDMI1 must be selected before PC is selected in Edit Name.
To enable audio when DVI Device is selected, be sure to establish the
connection using step ( ).
Connect the Audio cable for your LCD Display to the Audio port on the
back of the LCD Display.
Connect the power cord for your LCD Display to the Power port on the
back of the LCD Display. Turn on the power switch.
Note
Contact a local SAMSUNG Electronics Service Center to buy optional items.
Connecting to Other devices
Note
• AV input devices such as DVD players, VCRs or camcorders as well as your computer
can be connected to the LCD Display. For detailed information on connecting AV input
devices, refer to the contents under Adjusting Your LCD Display.
• The LCD Display 's configuration at the back may vary slightly depending on the LCD
Display model.
Connecting an External Monitor
Connections
Using the HDMI (Digital) connector on the video card.
• Connect the [HDMI IN 1] port on the LCD Display to the HDMI port on
the PC using the HDMI cable.Connect between the [DVI OUT(LOOPOUT)] port on the LCD Display and
the input port on another monitor using a DVI cable.
Connect between the [AUDIO OUT] port on the LCD Display and the audio
input port on another monitor using a stereo cable.
Note
Select DVI Mode as an input source for the external monitor connected to [DVI OUT].
DVI OUT does not support HDCP.
Connecting AV Devices
1. Connect an audio cable to [AV/COMPONENT AUDIO IN [R-AUDIO-L]] on
the product and the audio port on an external device such as a VCR or
DVD player.
2. Connect a video cable to [AV IN] on the product and the video output port
on the external device.
3. Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted.
4. Press SOURCE on the product or remote control and select "AV".
Note
AV input devices such as DVD players, VCRs or camcorders as well as your computer can
be connected to the LCD Display. For detailed information on connecting AV input devices,
refer to the contents under Adjusting Your LCD Display.
ConnectionsConnecting to a Camcorder
1. Locate the AV output jacks on the camcorder. They are usually found on
the side or back of the camcorder. Connect a video cable between the
VIDEO OUTPUT jack on the camcorder and the [AV IN] on the LCD Display .
2. Connect a set of audio cables between the AUDIO OUTPUT jacks on the
camcorder and the [AV /COMPONENT AUDIO IN [R-AUDIO-L]] on the
LCD Display .
3. Press SOURCE on the product or remote control and select "AV".
4. Then, start the Camcorders with a tape inserted.
Note
The audio-video cables shown here are usually included with a Camcorder.
(If not, check your local electronics store.)
If your camcorder is stereo, you need to connect a set of two cables.
ConnectionsConnecting Using a HDMI Cable
1. Connect an HDMI cable to [HDMI IN 2 (MAGICINFO)] (only with a
460UT-2, 460UT-B model) or [HDMI IN 1] on the product and the HDMI
output port on a digital device.
2. Press SOURCE on the product or remote control and select "HDMI1 /
HDMI2(only with a 460UT-2, 460UT-B model)"
Note
In HDMI mode, only PCM format audio is supported.
Connecting Using a DVI to HDMI Cable
Connect a DVI-HDMI cable to [HDMI IN 2 (MAGICINFO)] (only with a
460UT-2, 460UT-B model) or [HDMI IN 1] and the DVI output port on the
digital device.
Connect the red and white jacks of an RCA to stereo (for PC) cable to the
same colored audio output terminals of the digital output device, and conConnectionsnect the opposite jack to the [RGB/DVI/DP/HDMI AUDIO IN] terminal of
the LCD Display.
3. Press SOURCE on the product or remote control and select "HDMI1 /
HDMI2(only with a 460UT-2, 460UT-B model)"
Connecting a DVD Player
Connect a RGB to Component cable between the [RGB/COMPONENT
IN] port on the LCD Display and the PR, Y, PB jacks on the DVD player.
Connect a set of audio cables between the [AV/COMPONENT AUDIO IN
[R-AUDIO-L]] on the LCD Display and the AUDIO OUT jacks on the DVD
player.
Note
• Press SOURCE on the product or remote control and select "Component".
• Then, start the DVD Player with a DVD disc inserted.
• A RGB to component cable is optional.
• For an explanation of Component video, consult your DVD manual.
ConnectionsConnecting a DTV Set Top (Cable/Satellite) Box
Connect a RGB to Component cable between the [RGB/COMPONENT
IN] port on the LCD Display and the PR, Y, PB jacks on the Set Top Box.
Connect a set of audio cables between the [AV/COMPONENT AUDIO IN
[R-AUDIO-L]] on the LCD Display and the AUDIO OUT jacks on the Set
Top Box.
Note
• Press SOURCE on the product or remote control and select "Component".
• For an explanation of Component video, see your Set Top Box owner's manual.
Connecting to an Audio System
1. Connect a set of audio cables between the AUX L, R jacks on the AUDIO
SYSTEM and [AUDIO OUT] on LCD Display.
ConnectionsConnecting a LAN Cable
1. Connect the LAN cable between the [LAN] port on the product and the
[LAN] port on your PC.
Note
Applicable to the 460UTn-2, 460UTn2-UD2, 460UTn-B model only.
Connecting a USB devices
1. You can connect USB devices such as a mouse or keyboard.
Note
Applicable to the 460UTn-2, 460UTn2-UD2, 460UTn-B model only.
ConnectionsUsing the Software
Monitor Driver
Note
When prompted by the operating system for the monitor driver, insert the CDROM included with this monitor. Driver installation is slightly different from one
operating system to another. Follow the directions appropriate for the operating system you have.
Prepare a blank disk and download the driver program file at the Internet web
site shown here.
Internet web site :
http://www.samsung.com/
Installing the Monitor Driver (Automatic)
1. Insert CD into the CD-ROM drive.
2. Click "Windows".
3. Choose your monitor model in the model list, then click the "OK" button.
4. If you can see following message window, then click the "Continue Anyway" button. Then
click "OK" button (Microsoft
®
Windows
®
XP/2000 Operating System). Note
This monitor driver is certified by Microsoft, and installing it will not damage your system.
The certified driver will be posted on Samsung Monitor homepage.
http://www.samsung.com/
Installing the Monitor Driver (Manual)
Microsoft
®
Windows Vista™‚ Operating System
1. Insert your Manual CD into your CD-ROM drive.
2.
Click (Start) and "Control Panel". Then, double-click on "Appearance and Personalization".
3. Click "Personalization" and then "Display Settings".
4. Click "Advanced Settings...".
5. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means
the configuration for your monitor is completed. The monitor can be used as is.
Using the SoftwareIf the message "Windows needs..." is displayed, as shown in the figure below, click
"Continue".
Note
This monitor driver is under certifying MS logo, and this installation will not damage your
system.
The certified driver will be posted on Samsung Monitor homepage.
6. Click "Update Driver..." in the "Driver" tab.
7. Check the "Browse my computer for driver software" checkbox and click "Let me pick
from a list of device drivers on my computer".
8. Click "Have Disk...” and select the folder (for example, D:\Drive) where the driver setup
file is located, and click "OK".
Using the Software9. Select the model that matches your monitor from the list of monitor models on the screen,
and click "Next".
10. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence.
Microsoft
®
Windows
®
XP Operating System
Using the Software1. Insert CD into the CD-ROM drive.
2. Click "Start" → "Control Panel", then click the "Appearance and Themes" icon.
3. Click "Display" icon and choose the "Settings" tab then click "Advanced...".
4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab.
5. Click "Update Driver..." and select "Install from a list or..." then click "Next" button.
6. Select "Don't search, I will...", then click "Next" and then click "Have disk".
Using the Software7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in
the model list and click the "Next" button.
8. If you can see the following message window, then click the "Continue Anyway" button.
Then click "OK" button.
Note
This monitor driver is certified by Microsoft, and this installation will not damage your
system.
The certified driver will be posted on Samsung Monitor homepage.
http://www.samsung.com/
9. Click the "Close" button, then click the "OK" button continually.
Using the Software10. Monitor driver installation is completed.
Microsoft
®
Windows
®
2000 Operating System
When you can see "Digital Signature Not Found" on your monitor, follow these steps.
1. Choose "OK" button on the "Insert disk" window.
2. Click the "Browse" button on the "File Needed" window.
3. Choose A:(D:\Driver), then click the "Open" button and then click "OK" button.
How to install
1. Click "Start", "Setting", "Control Panel".
2. Double click the "Display" icon.
3. Select the "Settings" tab and click "Advanced Properties" button.
4. Choose "Monitor".
Case1 : If the "Properties" button is inactive, it means your monitor is properly configured.
Please stop installation
Case2 : If the "Properties" button is active, click the "Properties" button, then follow the
next steps.
5. Click "Driver" and then click on "Update Driver...", then click on the "Next" button.
6. Choose "Display a list of the known drivers for this device so that I can choose a specific
driver", then click "Next" and then click "Have disk".
7. Click the "Browse" button, then choose A:(D:\Driver).
8. Click the "Open" button, then click "OK" button.
9. Choose your monitor model and click the "Next" button. Then click "Next" button.
10. Click the "Finish" button, then the "Close" button.
Using the SoftwareIf you can see the "Digital Signature Not Found" window, then click the "Yes" button.
Then click the "Finish" button and the "Close" button.
Microsoft
®
Windows
®
Millennium Operating System
1. Click "Start", "Setting", "Control Panel".
2. Double click the "Display" icon.
3. Select the "Settings" tab and click "Advanced Properties" button.
4. Select the "Monitor" tab.
5. Click the "Change" button in the "Monitor Type" area.
6. Choose "Specify the location of the driver".
7. Choose "Display a list of all the driver in a specific location...", then click "Next" button.
8. Click the "Have Disk" button.
9. Specify A:\(D:\driver), then click "OK" button.
10. Select "Show all devices" and choose the monitor that corresponds to the one you connected to your computer and click "OK".
11. Continue choosing "Close" button and "OK" button until you close the Display Properties
dialogue box.
Microsoft
®
Windows
®
NT Operating System
1. Click "Start", "Settings", "Control Panel", and then double-click "Display" icon.
2. In Display Registration Information window, click Settings Tab and then click "All Display
Modes".
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency)
and then click "OK".
4. Click "Apply" button if you see the screen working normally after clicking "Test". If the
screen is not normal, change to a different mode (lower mode of resolution, colors or
frequency).
Note
If there is no Mode at All Display Modes, select the level of resolution and vertical frequency
by referring to the Preset Timing Modes in the user guide.
Linux Operating System
To execute X-Window, you need to make the X86Config file, which is a type of system setting
file.
1. Press "Enter" at the first and the second screen after executing the X86Config file.
2. The third screen is for setting your mouse.
3. Set a mouse for your computer.
4. The next screen is for selecting a keyboard.
Using the Software5. Set a Keyboard for your computer.
6. The next screen is for setting your monitor.
7. First of all, set a horizontal frequency for your monitor. (You can enter the frequency
directly.)
8. Set a vertical frequency for your monitor. (You can enter the frequency directly.)
9. Enter the model name of your monitor. This information will not affect the actual execution
of X-Window.
10. You have finished setting up your monitor. Execute X-Window after setting other requested hardware.
Using the SoftwareMDC Program Installation/Uninstallation
Installation
1 Insert the installation CD into the CD-ROM drive.
2 Click the MDC Unified installation program.
If a software installation window is not displayed on the main screen, install with the "MDC Unified"
execution file in the MDC folder on the CD.
3 Click "Next" in the displayed Installation Wizard screen.
4 In the "License Agreement" window displayed, select "I accept the terms in the license agreement"
and click "Next".
5 In the displayed "Customer Information" window, fill out all the information fields and click "Next".
6 In the displayed "Destination Folder" window, select the directory path you want to install the
program in and click "Next".
If the directory path is not specified, the program will be installed in the default directory path.
7 In the displayed "Ready to Install the Program" window, check the directory path to install the
program in and click "Install".
8 Installation progress will be displayed.
9 Click "Finish" in the displayed "InstallShield Wizard Complete" window.
Select "Launch MDC Unified" and click "Finish" to run the MDC program immediately.
10 The MDC Unified shortcut icon will be created on the desktop after installation.
The MDC execution icon may not be displayed depending on the PC system or product
specifications.
Press F5 if the execution icon is not displayed.
Uninstallation
1 Select Settings > Control Panel on the Start menu and double-click Add/Delete Program.
2 Select MDC Unified from the list and click Change/Remove.
MDC installation can be affected by the graphics card, mother board and network conditions.Connecting to MDC
Using MDC via RS-232C (serial data communications standards)
An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
What is MDC?
Multiple display control "MDC" is an application that allows you to easily control multiple display devices
simultaneously using a PC.Using MDC via Ethernet
Enter the IP for the primary display device and connect the device to the PC. One display device can
connect to another using an RS-232C serial cable.Connection Management
Connection management includes the Connection list and Connection list modification options.
Connection list – Connection list shows the details of the connections such as connection setting (IP/
COM, Port No, MAC, and Connection Type), connection status, Set ID Range, and detected devices.
Each connection can contain a maximum of 100 devices connected in serial daisy-chain fashion. All the
LFDs detected in a connection are displayed in the Device list, where the user can make groups and
send commands to detected devices.
Connection list modification options – Connection modification options includes Add, Edit, Delete,
and Refresh.Auto Set ID
Auto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection.
There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisychain running from 1 to 99, and then finally to Set ID 0.
Cloning
Using the Cloning feature, you can copy the setting of one LFD and apply it to multiple selected LFDs.
You can select specific tab categories or all tab categories for cloning, using the copy setting option
window. Command Retry
This feature is used to specify the maximum number of times the MDC command will be retried in case of
there being no reply or a corrupted reply from an LFD. The retry count value can be set using the MDC
options window. The retry count value must be between 1-10. The default value is 1. Getting Started with MDC
1 To start the program, click Start Programs Samsung MDC Unified.
2 Click Add to add a display device.
If the connection is established via RS232C, go to Serial and specify the COM Port. If the connection is established via Ethernet, enter the IP that was entered for the display
device.Main Screen Layout
Menu Bar Change the status of a display device or the properties of the program.
Device Category
View a list of connected display devices or device groups.
Schedule Category
View a list of schedules for display devices.
Set List Select the display device you want to adjust.
Modify the Set List Add, edit, regroup or delete sets.
Help Topics Display help topics for the program.
4
3
2
1
6
5
1
2
3
4
5
6Menus
You can power on or off a selected device or change the input source or volume of the device.
Choose display devices from the list of sets, and select the Home tab.
Home
Select an item and change the corresponding setting.
Power
On: Power on a selected display.
Off: Power off a selected dis
Input
Input Source : Change the input source.
Input sources available can vary depending on the Display Device Models.
The input source can be changed only for displays that are turned on.
Channel : Change the channel.
The TV channel can be changed by using the up/down arrow keys.
The channel can be changed only when the input source is TV.
Only registered channels can be selected.
Volume
The volume can be changed or the sound can be muted only for displays that are turned on.
Volume
The volume can be adjusted using the slider bar in the range of 0 to 100.
Adjust the volume of a selected display.
Input
Enable or disable Mute for a selected display.
Mute will automatically be disabled if Volume is adjusted when Mute is on.
Alert
Fault Device
1
2
3 This menu shows a list of display devices which have following errors - fan error, temperature
error, brightness sensor error, or lamp error.
Select a display device from the list. The Repair button will be enabled. Click the refresh button
to refresh the error status of the display device. The recovered display device will disappear
from the Fault Device List.
Fault Device Alert
Display device in which error is detected will be reported by email.
Fill in all required fields. The Test and OK buttons will be enabled. Ensure the Sender
information and at least one Recipient are entered.Screen Adjustment
The screen settings (contrast, brightness, etc.) can be adjusted.
Choose display devices from the list of sets, and select the Picture tab.
Custom
Select an item and change the corresponding screen setting.
Color and Tint are not available if the input source is PC.
Red, Green, Blue and PC Screen Adjustment are not available if the input source is Video.
Color, Tint, Color Tone, Color Temp, Red, Green, Blue and PC Screen Adjustment are not
available if both PC Source and Video Source are selected.
Contrast
Adjust the contrast for the selected display device.
Brightness
Adjust the brightness for the selected display device.
Color
Adjust the colors for the selected display device.
Tint (G/R)
Adjust the tint for the selected display device.
Color Tone
Adjust the background color tone for the selected display device.
Color Temp
Adjust the color temperature for the selected display device.
This option is enabled if Color Tone is set to Off.
Red
Customize the intensity of red color for the selected display device.
Green
Customize the intensity of green color for the selected display device.
Blue
Customize the intensity of blue color for the selected display device.Options
Dynamic Contrast
Adjust the Dynamic Contrast for the selected display device.
Gamma Control
Change the gamma value for the selected display.
Auto Motion Plus
This option is used to view dynamic images.
Off: Disable the Auto Motion Plus function.
Clear: Set the level of Auto Motion Plus to clear. This mode is suitable to display vivid images.
Standard: Set the level of Auto Motion Plus to standard.
Smooth: Set the level of Auto Motion Plus to smooth. This mode is suitable to display smooth
images.
Custom: Customize the level of screen burn-in or flickering.
Demo: This function demonstrates the technology of Auto Motion Plus. The result when the mode
is changed can be previewed on the left side of the window.
Brightness Sensor
Enable or disable the Brightness Sensor for the selected display device.
The Brightness Sensor detects the ambient light intensity and automatically adjusts the screen
brightness.
Brightness Sensor may not be available depending on the product. Size
Picture Size
Adjust the screen size for the selected display device.
The Detail item will be disabled if Picture Size is set to a mode that does not support detailed
configuration.
The -/+ buttons can be used to adjust Zoom.
The screen can be relocated using the up/down/left/right buttons.
Detail
You can view details of the selected screen size.
PC Screen Adjustment
Frequency adjustment or fine-tuning is available by using the -/+ buttons in Coarse or Fine.
To relocate the screen, click one of the four images below Position.
To automatically adjust the frequency, fine-tune or relocate the screen, click Auto Adjustment.Sound Adjustment
You can change the sound settings.
Choose display devices from the list of sets, and select the Sound tab.
The Bass or Treble item will be disabled if the item is not supported by the selected set.
Bass
Adjust the bass for the selected display.
Treble
Adjust the treble for the selected display.
Balance (L/R)
Adjust the volume of the left and right speakers of the selected display device.
SRS TS XT
Enable or disable the SRS TS XT effect for the selected display device. System Setup
Choose display devices from the list of sets, and select the System tab.
Video Wall
The Video Wall function can be used to display part of a whole picture or repeat the same picture on
each of connected multiple display devices.
Video Wall is enabled only when devices are in the group.
Video Wall
Enable or disable Video Wall.
Format
Select the format to display the split screen.
Full NaturalH
Select the number of horizontal display devices.
A maximum of 15 displays can be arranged in a row.
A maximum of 6 can be assigned to V if 15 is assigned to H.
V
Select the number of vertical display devices.
A maximum of 15 displays can be arranged in a row.
A maximum of 6 can be assigned to V if 15 is assigned to H.
Screen Position
View the layout of displays (configured by the screen divider) or change the layout as required.
Screen Position and Preview are enabled when Video Wall is set to on.
Note that if multiple sets are selected, Preview is enabled only if the settings for H and V match the
layout of the selected sets.
To change the Position, select a set and drag it to a new position.
The range of screen divider settings may differ depending on the model.PIP
Basic information required to adjust PIP will appear in the menu screen.
PIP will be disabled when Video Wall is ON.
Note that Picture Size is disabled when PIP is ON.
PIP Size
View the PIP Size of the current display.
PIP Source
Select a PIP input source.
Sound Select
Select and enable the sound from either the primary screen or secondary screen.
Channel
The channel can be changed if PIP Source is TV.General
User Auto Color
Automatically adjust the screen colors.
Available only in PC mode.
Auto Power
Set the product to automatically power on.
Standby Control
Set the standby mode to activate if an input source is not detected.
Fan & Temperature
Configure the settings required to detect the fan speed and internal temperature for the product's
protection.
Fan Control
Select a method to configure the fan speed.
Fan Speed
Configure the fan speed.
Temperature
Detect the internal temperature by specifying the range of temperature.Security
Safety Lock
Lock the on-screen menus.
To unlock the menus, set Safety Lock to Off.
Button Lock
Lock the buttons on the display device.
To unlock the buttons, set Button Lock to Off.
OSD Display
Source OSD
Select whether to display a message when the Source is changed.
Not Optimum Mode OSD
Select whether to display a message when a non-compatible mode is selected.
No Signal OSD
Select whether to display a message when there is no input signal.
MDC OSD
Select whether to display a message when settings are changed by the MDC.Time
Clock Set
Change the current time on the selected display device according to the time set on a PC.
If the time is not set on the display device, null values will be displayed.
Timer
On Time: Set the time to power on the selected display device.
Off Time: Set the time to power off the selected display device.
Volume: Specify the volume of the display device when it is powered on by On Time.
Source: Specify the input source of the display device when it is powered on by On Time.
Holiday: The Holiday Management settings can be applied to the Timer.
Repeat : Specify the period for which you want to repeat the selected Timer. Once: Activate the timer only one time.
EveryDay: Activate the timer every day.
Mon~Fri: Activate the timer from Monday through Friday.
Mon~Sat: Activate the timer on Saturdays and Sundays.
Manual: Customize days of the week.
The checkboxes to select days of the week below Repeat are enabled only if Manual is selected.
Holiday Management
Holiday Management allows you to prevent devices that are set to be powered on by the Timer from
turning on at a specified date.
The Holiday Management function can be enabled or disabled in the Timer settings menu.
Add: You can specify holidays:
Click the Add button in the Holiday Management window.
Delete: Delete holidays: check the corresponding checkboxes and click this button.
List of holidays: View a list of holidays you have added. Screen Burn Protection
Pixel Shift
Move the screen slightly at specified time intervals to prevent screen burn-in.
Screen Saver
This function prevents screen burn-in when the screen of the selected display device is left idle for an
extended period of time.
Interval: Set the interval to activate the Screen Saver.
Mode: The Time setting can vary for each Mode.
Safety ScreenThe Safety Screen function can be used to prevent screen burn-in when a stationary image displays on
the screen of a display device for an extended period of time.
Lamp Control
Lamp Control is used to adjust the backlight to reduce power consumption.
Automatically adjust the backlight of the selected display device at a specified time.
If Manual Lamp Control is adjusted, Auto Lamp Control will automatically switch to Off.
Manually adjust the backlight for the selected display.
If Auto Lamp Control is adjusted, Manual Lamp Control will automatically switch to Off.
Ambient Light: Ambient Light detects ambient light intensity and automatically adjusts the screen
brightness of all the LFDs in the same serial chain.
Tool Settings
Security
Panel Control
Turn on or off the screen of a display device.
Remote Control
Enable or disable the remote control.
1 2 3 4
1 Reset
Reset Picture
Reset the screen settings.
Reset Sound
Reset the sound settings.
Reset System
Reset the system settings.
Reset All
Reset the screen, sound and system settings at the same time.
Edit Column
Select the items you want to display in the list of sets.
Information
View the program information.
2
3
4Other Functions
Resizing a Window
Place the mouse pointer on a corner of the program window. An arrow will appear. Move the arrow to
customize the size of the program window.Group Management
Creating Groups
Create groups and manage the list of sets on a group basis.
Duplicate group names cannot be used.
1 Right-click and select Group>Edit in the display device list section on the left side of the program
window.
2 In the Edit Group window displayed, click Add on the sub level or Add on the same level.
Add on the sub level: Create a sub-group under the selected group.
Add on the same level: Create a group on the same level as the selected group.The Add on the same level button is enabled only if at least one group is created.
3 Enter the group name.
Deleting Groups
1 Select a group name, and click Edit.
2 In the Edit Group window displayed, click Delete.
3 Click Yes. The group will be deleted.
Renaming Groups
1 Select a group name, and click Edit.
2 In the Edit Group window displayed, click Rename.
3 If a cursor appears in the old group name, enter a new group name.Schedule Management
Creating Schedules
Create and register a schedule on a group basis.
1 Click All Schedule List in the schedule section on the left side of the program window. The Add
button will be enabled in the middle.
2 Click the Add button. The Add Schedule window will appear.3 Click Add below the Device Group item, and select the group you want to add a schedule to.
4 Select Date&Time/Action and click OK. The schedule will be added and a list of schedules will
appear in the set list window.
Device Group: Select a group.
Date&Time
Instant Execution: Run the schedule immediately.
Timer Set the date, time and interval to run the schedule.
Action: Select a function that will activate at the specified time and interval.
Schedule Modification
To modify a schedule, select the schedule and click Edit.
Deleting a Schedule
To delete a schedule, select the schedule and click Delete.Troubleshooting Guide
This program may malfunction sometimes due to a communication problem between the PC and
display or electromagnetic waves emitted from nearby electronic devices.
Issue Solution
The display you want to control
does not appear on the system
information chart.
1. Check the connection of the RS232C cable (check that the
cable is properly connected to appropriate serial port).
2. Check that another display with a duplicate ID is not
connected. Connecting displays with a duplicate ID can
cause the displays not to be shown due to data collision.
3. Check that the display ID is within the range of 0 and 99.
(Change the ID using the Display menu.)
For a display that supports the ID in a range of 0 to 99,
the ID should be set between 0 and 99.
The display you want to control
does not appear on the other
Control Info Grids.
Check that the display is powered on. (See the power status in
the system information chart.)
Ensure you select the input source the display is connected to.
The following message appears
repeatedly.
Check that the display you want to control is selected.
Displays power on or off at different
time from one another even though
On Time or Off Time is set.
Adjust the time on the PC to synchronize the time between the
connected displays.
The remote control does not work. The remote control may not work if the RS-232C cable is
removed or the program is closed abnormally while the Remote
Control function is Disable. To resolve this, run the program
again and set Remote Control to Enable.How display properties are shown when multiple displays are used
1 When no display is selected: The default value is displayed.
2 When one display is selected: Settings for the selected display are displayed.
3 When two displays are selected (e.g. in sequence of ID 1 andID 3): The settings for ID 1 are
displayed before the settings for ID 3.
4 When the All+Select checkbox is checked and all displays are selected: The default settings are
displayed.Adjusting the LCD Display
Input
Available Modes
• PC / DVI / DisplayPort
• AV
• Component
• HDMI
• MagicInfo
• TV
Note
• A TV tuner box (sold separately) must be connected to use the TV. (US Only)
• For an 460UT-2, 460UT-B model, MagicInfo can only be enabled when a network box is
connected.
Source List
Use to select PC, HDMI or other external input sources connected to the LCD Display. Use
to select the screen of your choice.
1. PC
2. DVI
3. AV
4. Component
5. HDMI1 - This is deactivated when a TV tuner box is installed.
6. HDMI2 - This is deactivated when a network box is installed.
7. DisplayPort
8. MagicInfo - For an 460UT-2, 460UT-B model, MagicInfo can only be enabled when a
network box is connected.
9. TV - Activated when a TV tuner box is connected. Note
The RGB/COMPONENT IN port is compatible with RGB (PC) and Component signals.
However, the picture may display abnormally if the connected external input signal is
different from the selected video signal.
PIP
Note
The PIP function is not available when Video Wall is On.
When external AV devices such as VCRs or DVDs are connected to the LCD Display , PIP
allows you to watch video from those devices in a small window super-imposed on the PC
Video signal. (Off/On)
Note
• PIP turns off when the LCD Display is switched to an external source.
•
If you select , , in Size, Position and Transparency will not be activated.
PIP
Turns the PIP Screen Off/On.
• Off
• On
Source
Note
• PIP is disabled if the primary screen does not receive a signal.
• A TV tuner box (sold separately) must be connected to use the TV. (US Only)
Selects the input source for the PIP.
Adjusting the LCD Display• PC : DVI / AV / HDMI1 / HDMI2 / DisplayPort
• DVI : PC
• AV : PC
• HDMI : PC
• Display Port : PC
Size
Changes the Size of the PIP window.
Note
will be changed to <16:9> when is .
Position
Changes the Position of the PIP window.
Transparency
Adjusts the Transparency of PIP windows.
• High
• Medium
• Low
Adjusting the LCD Display• Opaque
Edit Name
Name the input device connected to the input jacks to make your input source selection
easier.
VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver /
Game /Camcorder / DVD Combo / DHR / PC / DVI Devices
Note
• The displayed devices differ depending on the external input mode.
• When connecting a PC to the HDMI terminal, set Edit Name to PC. In other cases, set
Edit Name to AV. However, since 640x480, 720P (1280x720), and 1080p (1920x1080)
are common signals for AV and PC, make sure to set the Edit Name in accordance with
the input signal.
• The Picture menu changes depending on the input signal and Edit Name.
When using a DVI to HDMI cable connection (which does not support audio and video at
the same time), the audio port should be connected via a separate audio cable.
When a PC is connected, set Edit Name to DVI PC to enjoy the video and audio from the
connected PC.
When an AV device is connected, set Edit Name to DVI Device to enjoy the video and
audio from the connected AV device.
Source AutoSwitch Settings
Turning on the display with Source AutoSwitch On, and the previous video source selection
is not active, the display will automatically search the different video input sources for active
video.
Note
• If the display TV source is active (TV tuner connected to the display) the Source AutoSwitch search function becomes inactive. The display will remain in the TV source.
• Source AutoSwitch selection and PIP function: If the Source AutoSwitch selection is
set to On, the PIP function will not work, the Source AutoSwitch selection must be set
to Off, for the PIP feature to work.
• When the Source AutoSwitch selection is On, and or the Primary Source Recovery is
On, the display power saving mode becomes inactive.
• When Primary Source Recovery is On, only the Primary Source and Secondary
Source selection are available and they are interchangeable and selectable at will.
Adjusting the LCD DisplayRefer to PIP > Source for compatible signals for each primary input source.
Source AutoSwitch
When the Source AutoSwitch is On, the display video source will automatically be searched
for active video.
The Primary Source selection will be activated, if the current video source is not recognized.
Secondary source selection will become active, if no primary video source is available. If
the primary or secondary source is not recognized, the display will search again, if no active
video is found the display will show the no-input-signal message.
When the Primary Source selection is set to All, the display will search all the video source
inputs twice in sequence looking for an active video source, returning back to the first video
source in the sequence if no video is found.
1. Off
2. On
Primary Source Recovery
When Primary Source Recovery is On, only the Primary Source and Secondary
Source video source selection will be searched for active video.
The Primary Source will be selected if active video is found, if no video is found, the Secondary Source will be selected, if no video is found in Secondary Source again, the noinput-signal is displayed.
1. Off
2. On
Adjusting the LCD DisplayPrimary Source
Specify Primary Source for the automatic input source.
Secondary Source
Specify Secondary Source for the automatic input source.
Picture [PC / DVI / DisplayPort / MagicInfo Mode]
Available Modes
• PC / DVI / DisplayPort
• AV
• Component
• HDMI
• MagicInfo
• TV
Note
• A TV tuner box (sold separately) must be connected to use the TV. (US Only)
• For an 460UT-2, 460UT-B model, MagicInfo can only be enabled when a network box is
connected.
Mode
Adjusting the LCD Display Note
Not available when Dynamic Contrast is set to On.
1. Information
Recommended for communicating exact information (e.g. public information).
2. Advertisement
Recommended for displaying advertisements (e.g. videos or indoor or outdoor ads).
3. Custom
Custom
By using the on-screen menus, the contrast and brightness can be changed to your personal
preference.
Note
• By adjusting the picture using the Custom function, MagicBright will change to Custom mode.
• Not available when Dynamic Contrast is set to On.
1. Contrast
Adjusts the Contrast.
2. Brightness
Adjusts the Brightness.
3. Sharpness
Adjusts the Sharpness.
4. Gamma
Adjust the mid-range brightness (Gamma) for the picture.
• Natural
Adjusting the LCD Display• Mode 1
Sets the picture brighter than Natural.
• Mode 2
Sets the picture darker than Mode 1.
• Mode 3
Increases the contrast between dark and bright colors.
Color Tone
Note
Not available when Dynamic Contrast is set to On.
The color tones can be changed.
1. Off
2. Cool
3. Normal
4. Warm
5. Custom
Note
If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp. function is
disabled.
If you set the Color Tone to Off, the Color Control function is disabled
Color Control
Adjusts individual Red, Green, Blue color balance.
Note
Not available when Dynamic Contrast is set to On.
1. Red
2. Green
Adjusting the LCD Display3. Blue
Color Temp.
Color Temp. is a measure of the 'warmth' of the image colors.
Note
• Not available when Dynamic Contrast is set to On.
• This function is only enabled if the Color Tone is set to Off.
Image Lock
Image Lock is used to fine-tune and get the best image by removing noise that creates
unstable images with jitters and shakiness. If satisfactory results are not obtained using the
Fine adjustment, use the Coarse adjustment and then use Fine again.
Note
Available in PC mode only.
Coarse
Removes noise such as vertical stripes. Coarse adjustment may move the screen image
area. You may relocate it to the center using the horizontal control menu.
Fine
Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat
it after adjusting the frequency (clock speed).
Position
Adjusts the screen location horizontally and vertically.
Adjusting the LCD DisplayAuto Adjustment
The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution
in the control panel, the auto function is performed.
Note
Available in PC mode only.
Signal Balance
This is used to make up for the weak RGB signal transmitted by a long signal cable.
Note
• Not available when Dynamic Contrast is set to On.
• Available in PC mode only.
Signal Balance
Selects either On or Off with the signal balance.
Signal Control
Note
Available when Signal Balance is set to On.
1. R-Gain
2. G-Gain
3. B-Gain
4. R-Offset
5. G-Offset
Adjusting the LCD Display6. B-Offset
Size
The Size can be switched.
1. 16:9
2. 4:3
PIP Picture
Adjusts the PIP Screen Settings.
Note
• Available Modes: PIP On
1. Contrast
Adjusts the Contrast of the PIP window on the screen.
2. Brightness
Adjusts the Brightness of the PIP window on the screen.
3. Sharpness
Adjusts the Sharpness of the PIP window on the screen.
4. Color
Adjusts the Color of the PIP window on the screen.
Adjusting the LCD Display Note
PIP input only operates in AV, HDMI, or Component mode.
5. Tint
Adds a natural tone to the PIP window.
Note
PIP input only operates in AV, HDMI, or Component mode.
Dynamic Contrast
Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to
create an optimum contrast.
1. Off
2. On
Note
Disabled when PIP is set to On.
Lamp Control
Adjusts the inverter lamp in order to reduce energy consumption.
Note
Not available when Dynamic Contrast is set to On.
Picture Reset
Reset the screen settings.
Picture [ AV / HDMI / Component / TV Mode]
Available Modes
• PC / DVI / DisplayPort
Adjusting the LCD Display• AV
• Component
• HDMI
• MagicInfo
• TV
Note
• A TV tuner box (sold separately) must be connected to use the TV. (US Only)
• For an 460UT-2, 460UT-B model, MagicInfo can only be enabled when a network box is
connected.
Mode
The LCD Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and
"Custom") that are preset at the factory.
Dynamic, Standard, Movie, or Custom can be activated.
Note
Not available when Dynamic Contrast is set to On.
1. Dynamic
2. Standard
3. Movie
4. Custom
Custom
By using the on-screen menus, the contrast and brightness can be changed to your personal
preference.
Note
Not available when Dynamic Contrast is set to On.
Contrast
Adjusts the Contrast.
Adjusting the LCD DisplayBrightness
Adjusts the Brightness.
Sharpness
Adjusts the picture Sharpness.
Color
Adjusts the picture Color.
Tint
Adds a natural tone to the display.
Note
Operates only if the video signal is NTSC.
Color Tone
The color tones can be changed. The individual Color components are also user adjustable.
Note
Not available when Dynamic Contrast is set to On.
1. Off
2. Cool2
3. Cool1
4. Normal
5. Warm1
6. Warm2
Adjusting the LCD Display Note
If you set the Color Tone to Cool2, Cool1, Normal, Warm1, or Warm2, the Color Temp.
function is disabled.
Color Temp.
Color temp. is a measure of the 'warmth' of the image colors.
Note
This function is enabled when Mode is set to Custom, and Dynamic Contrast and Color
Tone are Off.
Size
The Size can be switched.
PC mode (PC, HDMI [PC Timing]) : 16:9 - 4:3
Video mode (HDMI [Video Timing], AV or Component): 16:9 - Zoom1 - Zoom2 - 4:3 -
Screen Fit - Custom
1. 16:9 - Sets the picture to 16:9 wide mode.
2. Zoom 1 - Magnifies the size of the picture on the screen.
3. Zoom 2 - Magnifies the size of the picture more than Zoom 1.
4. 4:3 - Sets the picture to 4:3 normal mode.
5. Screen Fit - Displays the input scenes as they are without any cutoff when HDMI 720p,
1080i, 1080p signals are input.
6. Custom - Changes the resolution to suit the user's preferences.
Note
• Certain external devices may feed the display an out of spec signal that may cause cutoff
even when using the Screen Fit feature.
• Zoom 1, Zoom 2 are unavailable in HDMI mode.
• The Position and Reset functions are available in Zoom 1 or Zoom 2 modes.
Adjusting the LCD DisplayDigital NR (Digital Noise Reduction)
Turns the Digital Noise Reduction feature Off/On. The Digital Noise Reduction feature allows
you to enjoy clearer and crisper images.
1. Off
2. On
Note
Digital NR function is not available for all resolutions.
HDMI Black Level
When a DVD or set-top box is connected to your TV via HDMI, it may cause a degradation
in the screen quality, such as an increase in the black level, a low contrast, or discoloration,
etc., depending on the external device connected. In this case, adjust the screen quality of
your TV by configuring the HDMI Black Level.
1. Normal
2. Low
Note
For Timing which can be used for both the PC and the DTV in HDMI mode, HDMI Black
Level will be activated.
Film Mode
Adjusting the LCD DisplayFilm Mode calibrates unnatural pictures that may occur in a movie (which is in 24 frames).
Moving subtitles may appear corrupted when this mode is enabled.
(In HDMI mode, this function is available when the input signal is interlaced scan; it is not
available in progressive scan.)
1. Off
2. On
PIP Picture
Adjusts the PIP Screen Settings.
Note
Available Modes: PIP On
1. Contrast
Adjusts the Contrast of the PIP window on the screen.
2. Brightness
Adjusts the Brightness of the PIP window on the screen.
3. Sharpness
Adjusts the Sharpness of the PIP window on the screen.
Dynamic Contrast
Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to
create an optimum contrast.
1. Off
2. On
Note
Disabled when PIP is set to On.
Adjusting the LCD DisplayLamp Control
Adjusts the inverter lamp in order to reduce energy consumption.
Note
Not available when Dynamic Contrast is set to On.
Picture Reset
Reset the screen settings.
Sound
Available Modes
• PC / DVI / DisplayPort
• AV
• Component
• HDMI
• MagicInfo
• TV
Note
• A TV tuner box (sold separately) must be connected to use the TV. (US Only)
• For an 460UT-2, 460UT-B model, MagicInfo can only be enabled when a network box is
connected.
Mode
The LCD Display has a built-in high fidelity stereo amplifier.
1. Standard
Selects Standard for the standard factory settings.
2. Music
Adjusting the LCD DisplaySelects Music when watching music videos or concerts.
3. Movie
Selects Movie when viewing movies.
4. Speech
Selects Speech when watching a show that is mostly dialog (i.e., news).
5. Custom
Selects Custom if you want to adjust the settings according to your personal preferences.
Custom
The sound settings can be adjusted to suit your personal preferences.
Note
• You can hear the sound even when sound value is set to 0.
• If you adjust sound using Custom function, Mode will turn to Custom mode.
Bass
Emphasizes low frequency audio.
Treble
Emphasizes high frequency audio.
Balance
Allows you to Adjusts the sound balance between the left and right speakers.
Auto Volume
Reduces the difference in volume control between broadcasters.
1. Off
2. On
Adjusting the LCD DisplaySRS TS XT
SRS TS XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. TruSurround XT delivers a compelling, virtual surround sound
experience through any two-speaker playback system, including internal television speakers.
It is fully compatible with all multichannel formats.
1. Off
2. On
Sound Select
Enable the sound of either the primary or secondary display in PIP mode.
Note
Available when PIP is set to On.
1. Main
2. Sub
Sound Reset
Reset the sound settings.
Setup
Available Modes
• PC / DVI / DisplayPort
• AV
• Component
Adjusting the LCD Display• HDMI
• MagicInfo
• TV
Note
• A TV tuner box (sold separately) must be connected to use the TV. (US Only)
• For an 460UT-2, 460UT-B model, MagicInfo can only be enabled when a network box is
connected.
Language
You can choose one of 13 languages.
Note
The language chosen affects only the language of the OSD. It has no effect on any software
running on the computer.
Time
Clock Set, Sleep Timer, Timer1 / Timer2 / Timer3, and Holiday Management can be set.
Clock Set
Current Time Setting.
Sleep Timer
Adjusting the LCD DisplayTurns the LCD Display off automatically at certain times.
1. Off
2. 30
3. 60
4. 90
5. 120
6. 150
7. 180
Timer1 / Timer2 / Timer3
You can set the LCD display to automatically turn on or off at a specified time.
Note
• Holiday : select Apply to disable the timer on holidays and Don't apply to enable the
timer on holidays.
• Only enabled when the clock is set using the Clock Set menu.
• The Manual option allows you to select a day of the week.
Holiday Management
• Add
You can register holidays.
• Delete Selected
Adjusting the LCD DisplayYou can delete selected holidays.
Note
• Only enabled when registered holidays are selected.
• More than one holiday can be selected and deleted.
• Delete All
You can delete all the registered holidays.
Menu Transparency
Change the transparency of the background of the OSD.
1. High
2. Medium
3. Low
4. Opaque
Adjusting the LCD DisplaySafety Lock
Change PIN
The password can be changed.
The preset password for the LCD Display is "0000".
Note
If you forgot your password, press the remote buttons INFO → EXIT → MUTE to reset the
password to "0000."
Lock On
This is the function that locks the OSD in order to keep the current settings or to prevent
others from adjusting the settings.
Energy Saving
This feature adjusts the power consumption of the unit in order to save energy.
1. Off
2. On
Video Wall
A Video Wall is a set of video screens connected together, so that each screen shows a part
of the whole picture or where the same picture is repeated on each screen.
When the Video Wall is on, you can adjust the Video Wall screen setting.
Adjusting the LCD Display Note
• When a Horizontal or Vertical split is over four, use a resolution of XGA (1024 x 768) or
greater to prevent any picture degradation.
• Size will be disabled when Video Wall is running.
• Disabled when PIP is set to On.
Video Wall
Turns Off/On the Video Wall function of the selected display Off/On.
• Off
• On
Format
The Format can be selected to see a divided screen.
• Full
Provides a full screen without any margins.
• Natural
Displays a natural image with the original aspect ratio intact.
Horizontal
Adjusting the LCD DisplaySets how many parts the screen should be divided horizontally.
Fifteen adjustment levels: 1~15.
Note
If Vertical is set to 15, the maximum value for Horizontal is 6.
Vertical
Sets how many parts the screen should be divided vertically.
Fifteen adjustment levels: 1~15.
Note
If Horizontal is set to 15, the maximum value for Vertical is 6.
Screen Position
The screen can be divided into several images. A number of screens can be selected with a
different layout when dividing.
• Select a mode in Screen Position.
• Select a display in Display Selection.
• The selection will be set up by pressing a number in the selected mode.
• The screen can be split into a maximum of 100 sub-screens.
Note
When more than four displays are connected, we recommend a resolution of XGA (1024*768)
or greater to prevent any picture degradation.
Safety Screen
The Safety Screen function is used to prevent afterimages that may appear when a still
picture is displayed on the screen over a long time.
Adjusting the LCD Display Note
This function is not available when the power is turned off.
Pixel Shift
Pixel Shift
To prevent after-images on the screen, you can use this function to have pixels move on the
LCD in the horizontal or vertical direction.
• Off
• On
Horizontal
Sets how many pixels the screen moves horizontally.
Five adjustment levels: 0, 1, 2, 3, and 4.
Vertical
Sets how many pixels the screen moves vertically.
Five adjustment levels: 0, 1, 2, 3, and 4.
Adjusting the LCD DisplayTime
Set the time interval for performing the horizontal or vertical movement, respectively.
Timer
Timer
You can set the timer for Screen Burn Protection.
If you start the operation to erase any residual image, the operation will be performed for the
set period of time and then automatically finish.
• Off
• On
Mode
You can change the Safety Screen Type.
• Bar
• Eraser
• Pixel
Adjusting the LCD DisplayPeriod
Use this function to set the execution period for each mode set in the timer.
Time
Within the set period of time specify a time for execution.
• Mode - Bar, Eraser, Pixel : 10~50 sec
Bar
This function prevents after-images on the screen by moving long black and white vertical
lines.
Eraser
This function prevents after-images on the screen by moving a rectangular pattern.
Adjusting the LCD DisplayPixel
This function prevents after-images by moving many pixels on the screen.
Side Gray
Select the brightness of the grey for the screen background.
• OFF
• Light
• Dark
Resolution Select
When the picture is not displayed properly on the screen when setting the graphics card
resolution of the computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz
or 1366 x 768 @ 60Hz, by using this function(Resolution Select), you can have the picture
displayed on the screen in the specified resolution.
Note
Available in PC mode only.
1. Off
2. 1024 X 768
3. 1280 X 768
4. 1360 x 768
Adjusting the LCD Display5. 1366 X 768
Note
Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz,
1280 x 768 @ 60Hz, 1360 x 768 @ 60Hz or 1366 x 768 @ 60Hz.
Power On Adjustment
Adjusts the Power On time for the screen.
Caution: Set the Power On time to be longer to avoid overvoltage.
OSD Rotation
OSD Rotate
1. Landscape
2. Portrait
Advanced Settings
Configures the settings more elaborately.
Fan & Temperature
Protects the product by detecting the fan speed and internal temperature.
Fan Control
Adjusting the LCD DisplaySelects auto or manual for the fan speed settings.
Fan Speed Setting
Sets the fan speed within a range of 0 and 100.
Note
Enabled when Fan Control is set to Manual.
Temperature Control
Detects the product's internal temperature and specifies the desired temperature.
The product is set to 77°C by default.
Note
• The picture will be dimmed if the temperature exceeds the specified temperature, and the
product will automatically power off to prevent overheating if the temperature keeps rising.
• It is best to use the product at temperatures 75 - 80°C (based on ambient temperature of
40°C).
Refer to "Specifications" herein for details about operating conditions.
• It is best to set Fan Control to Auto when you change the Temperature Control setting.
Current Temperature
Shows the current temperature of the product.
Adjusting the LCD DisplayAuto Power
Enables or disables Auto Power for the product.
• Off
• On
Note
When Auto Power is On, the product will power on automatically as soon as it is connected
to power.
Button Lock
Locks or unlocks the monitor control buttons on the product.
• Off
• On
User Auto Color
1. Auto Color
Automatically adjusts the colors.
2. Reset
Resets the color settings.
Adjusting the LCD Display Note
Enabled only in PC mode.
Standby Control
Sets the standby mode, which will be activated when no input signal is detected.
• Off
A message will read if no input signal is detected.
• On
Power-saving mode will be activated if no input signal is detected.
• Auto
When no input signal is detected,
- Power-saving mode will be activated if an external device is connected.
- A message will read if no external device is connected.
Note
• Enabled only in PC, DVI, HDMI, or DisplayPort mode.
• This function at doesnt work at HDMI source.
Lamp Schedule
Adjusts the luminance to a user-specified value at a specified time.
OSD Display
Displays or hides a menu item on the screen.
Adjusting the LCD DisplaySource OSD
• Off
• On
Not Optimum Mode OSD
• Off
• On
No Signal OSD
• Off
• On
MDC OSD
• Off
Adjusting the LCD Display• On
Software Upgrade
Performs a software upgrade.
1. Connect the product to a computer via a digital signal such as DVI or HDMI. Click the
BMP image file converted from an SW code. The image below will appear on the screen
of the product.
2. While a BMP image onto which the software code has been converted is displayed on
the screen, select Software Upgrade.
Note
When there are two or more BMP images, they are displayed on the screen using a
slideshow.
• It is recommended that the playback interval between two BMP images in the slideshow should be one second. The image extraction probability will decrease with other
playback intervals.
• A BMP image might not be extracted if it is covered by another image (for example,
the mouse pointer).
3. If a more recent version than the current software version is detected, you will be asked
whether to upgrade the current software. If you select , the upgrade is performed.
4. When the software upgrade is completed, the product is turned off and on automatically.
Note
• This only operates with a digital signal, such as in DVI, HDMI1, or HDMI2 mode. (The
input resolution must be identical to the panel resolution.)
• In HDMI1 and HDMI2 modes, the timing values used for both the PC and TV are only
supported if the Edit Name is set to PC or DVI PC.
• This is only supported if the Size is set to 16:9.
Adjusting the LCD DisplaySetup Reset
Reset all the values for a setting.
Reset All
Reset all the settings for the display.
Multi Control
Available Modes
• PC / DVI / DisplayPort
• AV
• Component
• HDMI
• MagicInfo
• TV
Note
• A TV tuner box (sold separately) must be connected to use the TV. (US Only)
• For an 460UT-2, 460UT-B model, MagicInfo can only be enabled when a network box is
connected.
Multi Control
Assigns an individual ID to the SET.
• ID Setup
Assigns distinctive IDs to the SET.
• ID Input
Adjusting the LCD DisplayUse to select the transmitter functions of the individual SET. Only a SET where the ID
corresponds to the transmitter setting becomes activated.
• MDC Connection
Selects a port to receive the MDC inputs from.
• Communicates with the MDC via a RS232C MDC cable.
• Communicates with the MDC via an RJ45 MDC cable.
• Network Setting
• IP Setting : Manual, Auto
• IP Address : Manually enter the IP Address if IP Setting is set to Manual.
• Subnet Mask : Manually enter the Subnet Mask if IP Setting is set to Manual.
• Gateway : Manually enter the Gateway if IP Setting is set to Manual.
MagicInfo
Available Modes
• PC / DVI / DisplayPort
• AV
• Component
• HDMI
• MagicInfo
• TV
Note
• A TV tuner box (sold separately) must be connected to use the TV. (US Only)
• For an 460UT-2, 460UT-B model, MagicInfo can only be enabled when a network box is
connected.
Note
• The remote control can be used to select MagicInfo. However, it is recommended to use
a separate USB keyboard to utilize MagicInfo fully.
• For MagicInfo in Device mode, moving external devices while booting may cause errors.
Set up external devices only if the LCD Display turns on.
• Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the
program (MagicInfo) may stop. If you do unplug the cable, restart the system.
• Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the
program (MagicInfo) may stop.
• To access other sources, press the SOURCE button in MagicInfo.
Adjusting the LCD Display• The preset password for the LCD Display is "000000".
• The server program's Power-On option works only if the LCD Display's power is completely shut off.
Please make sure not to use the Power-On option when the LCD Display is in the process
of shutting down since this may cause system errors on the LCD Display.
• When using MagicInfo with the MagicInfo Server Program: perform Network mode.
• When using MagicInfo with the device directly connected to LCD Display : execute Device
mode.
• Press ESC to directly go to the MagicInfo Window screen.
• To setup MagicInfo on a Windows screen, a keyboard and mouse are required.
• To setup MagicInfo on a Windows screen, refer to the MagicInfo Server Help.
It is highly recommended not to turn off the AC power during an operation.
• For pivoted LCD Displays, ticker transparency is not supported.
• For pivoted LCD Displays, a screen resolution of up to 720*480(SD) is supported for
movies.
• For drive D:, EWF is not applied.
• To save Setup contents that have been changed when EWF is in the Enable state, you
must Commit them.
• By selecting Disable, Enable or Commit, the system is restarted.
MagicInfo
1. Select Application - step 1
You can select an Application to be executed in your computer when Windows starts.
2. Select TCP/IP - step 2
Adjusting the LCD DisplayIn step 2 of MagicInfo Setup Wizard, you don’t have to go to Network Setting on the desktop
to make your settings for TCP/IP. You just do that at step 2 of MagicInfo installation.
3. Select Language - step 3
When using multiple languages, you can choose and set a specific language among them.
4. Select Screen Type - step 4
Adjusting the LCD Display
Note
English is set as the default language. You do not need to select a language if
you will be using English as the on-screen menu language.You can select which rotation type will be applied to your device.
5. Setup Information
Shows the settings that have been selected by the user.
Note
If the MagicInfo icon is not displayed on the notification area, double click the MagicInfo
icon on the window desktop. The icon will appear.
Adjusting the LCD DisplayTroubleshooting
Self-Test Feature Check
Note
Check the following items yourself before calling for assistance. Contact a Service Center for
problems that you cannot solve by yourself.
Self-Test Feature Check
1. Turn off both your computer and the LCD Display.
2. Unplug the video cable from the back of the computer.
3. Turn on the LCD Display.
The figure shown below ("No Signal") appears on a black background when the LCD
Display is working normally even though no video signal is detected: While in the SelfTest mode, the LED power indicator remains green and the figure moves around on the
screen.
4. Turn off your LCD Display and reconnect the video cable; then turn on both your computer and the LCD Display
If your LCD Display screen remains blank after using the previous procedure, check your
video controller and computer system; your LCD Display is functioning properly.
Warning Messages
You can even view the screen at a resolution of 1920 x 1080. However, you will receive the
following message for a minute; You can choose to change the screen resolution or stay in
the current mode during that time. If the resolution is more than 85Hz, you will see the black
screen because the LCD Display does not support over 85Hz.
Note
Refer to Specifications > Preset Timing Modes for the resolutions or frequencies supported
by the LCD Display.
Maintenance and Cleaning
1) Maintaining the LCD Display Case.
Clean with a soft cloth after disconnecting the power cord.• Do not use benzene, thinner or other flammable substances.
2) Maintaining the Flat Panel Display Screen.
Clean with a soft cloth (cotton flannel).
• Never use acetone, benzene or thinner.
(They may cause flaws or deformation of the screen
surface.)
• The user is responsible for any damage caused by
using these substances.
Symptoms and Recommended Actions
Note
A LCD Display recreates visual signals received from the computer. Therefore, if there is a
problem with the computer or the video card, this can cause the LCD Display to become
blank, have poor coloring, become noisy, etc. In this case, first check the source of the problem, and then contact a Service Center or your dealer.
1. Check if the power cord and the video cables are properly connected to the computer.
2. Check if the computer beeps more than 3 times when booting.
(If it does, request service.)
3. If you installed a new video card or if you assembled the PC, check if you installed the
Adaptor(video).
4. Check if the scanning ratio of the video screen is set to between 50 Hz ~ 85 Hz.
(Do not exceed 60Hz when using the maximum resolution.)
5. If you have problems in installing the Adaptor (video) driver, boot the computer in Safe
Mode, remove the Display Adaptor in the "Control Panel −> System −> Device Administrator" and then reboot the computer to reinstall the Adaptor (video) driver.
Check List
Note
• The following table lists possible problems and their solutions. Before calling for assistance, check the information in this section to see if you can remedy any problems for
yourself. If you do need assistance, please call the phone number on the Information
section or contact your dealer.
Problems related to the Installation (PC Mode)
Note
Problems related to the LCD Display installation and their solutions are listed.
Q: The LCD Display screen flickers.
TroubleshootingA: Check if the signal cable between the computer and the LCD Display is securely connected.
(Refer to Connecting a Computer)
Problems related to the Screen
Note
Problems related to the LCD Display screen and their solutions are listed.
Q: The screen is blank and the power indicator is off.
A: Ensure that the power cord is firmly connected and the LCD Display is on.
(Refer to the Connecting a Computer)
Q: "No Signal" message.
A: Ensure that the signal cable is firmly connected to the PC or video sources.
(Refer to the Connecting a Computer)
A: Ensure that the PC or video sources are turned on.
Q: "Not Optimum Mode" message.
A: Check the maximum resolution and the frequency of the video Adaptor.
A: Compare these values with the data in the Preset Timing Modes Chart.
Q: The picture rolls vertically.
A: Check if the signal cable is securely connected. Re-connect it, if necessary.
(Refer to Connecting a Computer)
Q: The image is not clear; picture is blurred.
A: Run Frequency Coarse and Fine tuning.
A: Turn on again after removing all accessories (video extension cable, etc.)
A: Set the resolution and frequency to the recommended ranges.
Q: The picture image is unstable and shakes.
A: Check if the resolution and frequency set for the computer video card falls in the range
supported by the LCD Display. If not, reset them referring to the current Information
under the LCD Display menu and Preset Timing Modes.
Q: Ghost images are shown in the picture.
A: Check if the resolution and frequency set for the computer video card falls in the range
supported by the LCD Display. If not, reset them referring to the current Information
under the LCD Display menu and Preset Timing Modes.
Q: The image is too light or too dark.
A: Adjust the brightness and contrast.
(Refer to the Brightness, Contrast)
TroubleshootingQ: The screen color is inconsistent.
A: Adjust color using Custom under OSD Color Adjustment menu.
Q: The color image is distorted by dark shadows.
A: Adjust color using Custom under OSD Color Adjustment menu.
Q: The color white is poor.
A: Adjust color using Custom under OSD Color Adjustment menu.
Q: The Power Indicator blinks.
A: The LCD Display is currently saving the changes made in the settings to the OSD
memory.
Q: The screen is blank and the power indicator light blinks every 0.5 or 1 seconds.
A: The LCD Display is using its power management system. Press any key on the keyboard.
Problems related to Audio
Note
Problems related to audio signals and their solutions are listed below.
Q: No sound.
A: Ensure that the audio cable is firmly connected to both the audio-in port on your LCD
Display and the audio-out port on your sound card.
(Refer to the Connecting a Computer)
A: Check the volume level.
Q: The sound level is too low.
A: Check the volume level.
A: If the volume is still too low after turning the control to its maximum, check the volume
control on the computer sound card or software program.
Q: The sound is too high or too low.
A: Adjusts the Treble and Bass to the appropriate levels.
Problems related to the Remote Control
Note
Problems related to the remote control and their solutions are listed.
Q: The remote control buttons do not respond.
A: Check the polarities (+/-) of the batteries.
A: Check if the batteries are empty.
A: Check if the power is on.
A: Check if the power cord is securely connected.
TroubleshootingA: Check if a special fluorescent or neon lamp is on in the vicinity.
Q & A
Q: How can I change the frequency?
A: The frequency can be changed by reconfiguring the video card.
Note
That video card support can vary, depending on the version of the driver used. (Refer
to the computer or the video card manual for details.)
Q: How can I adjust the resolution?
A: Windows XP:
Control Panel → Appearance and Themes → Display → Settings.
A: Windows ME/2000:
Control Panel → Display → Settings.
* Contact the video card manufacturer for details.
Q: How can I set the Power Saving function?
A: Windows XP:
Control Panel → Appearance and Themes → Display → Screen Saver.
Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer
Manual).
A: Windows ME/2000:
Control Panel → Display → Screen Saver.
Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer
Manual).
Q: How can I clean the outer case/LCD Panel?
A: Disconnect the power cord and then clean the LCD Display with a soft cloth, using either
a cleaning solution or plain water.
Do not leave any detergent or scratches on the case. Do not let any water enter the
LCD Display.
Q: How can I play the video?
A: The video supports the MPEG1 and WMV codecs only. Install the corresponding codec
to play the video. Note that some of the codecs can be incompatible.
Note
Before calling for assistance, check the information in this section to see if you can remedy
any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer.
TroubleshootingSpecifications
General
General
Model Name SyncMaster 460UTn-2 / 460UTn2-UD2 / 460UT-2 / 460UTnB / 460UT-B
LCD Panel
Size 46 inches (116 cm)
Display area 1018.353 mm (H) x 572.544 mm (V)
Pixel Pitch 0.7455 mm (H) x 0.7455 mm (V)
Synchronization
Horizontal 30 ~ 81 kHz
Vertical 56 ~ 85 Hz
Display Color
16.7M
Resolution
Optimum resolution 1366 x 768 @ 60 Hz
Maximum resolution 1920 x 1080 @ 60 Hz
Maximum Pixel Clock
148.5 MHz (Analog,Digital)
Power Supply
This product supports 100 - 240 V.
Since the standard voltage may differ from country to country, please check the
label on the back of the product.
Signal connectors
D-sub(Component), DVI-D In/Out, VCR, HDMI 1/2, RS232C In/Out, DP
DC Out, Stereo Audio In/Out, Audio In(L/R), RJ45, IR In/Out, Mini USB
• USB, LAN, D-sub out (460UTn-2, 460UTn2-UD2, 460UTn-B Only)
Dimensions (W x H x D) / Weight
460UTn-2,
460UTn2-UD2
1025.7 mm x 579.8 mm x 130.0 mm (40.4 x 22.8 x 5.1 inches) /
27.8 Kg (61.3 Ibs)
460UT-2 1025.7 mm x 579.8 mm x 130.0 mm (40.4 x 22.8 x 5.1 inches) /
26.3 Kg (58.0 Ibs)
460UTn-B 1025.7 mm x 579.8 mm x 130.0 mm (40.4 x 22.8 x 5.1 inches) /
20.8 Kg (45.9 Ibs)
460UT-B 1025.7 mm x 579.8 mm x 130.0 mm (40.4 x 22.8 x 5.1 inches) /
19.3 Kg (42.5 Ibs)VESA Mounting Interface
600 mm × 400 mm
Environmental considerations
Operating 460UTn
-2
460UTn
2-UD2
460UTn
-B
Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity : 10 % ~ 80 %, non-condensing
460UT-
2
460UTB
Temperature : 32°F ~ 104°F (0°C ~ 40°C)
Humidity : 10 % ~ 80 %, non-condensing
Storage 460UTn
-2
460UTn
2-UD2
460UTn
-B
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
460UT-
2
460UTB
Plug and Play Capability
This LCD Display can be installed on any Plug & Play compatible system. The
interaction of the LCD Display and the computer systems will provide the best operating conditions and LCD Display settings. In most cases, the LCD Display
installation will proceed automatically, unless the user wishes to select alternate
settings.
Dot Acceptable
TFT-LCD panels manufactured by using advanced semiconductor technology with
precision of 1ppm (one millionth) above are used for this product. But the pixels of
RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some
black pixels may be seen. This is not from bad quality and you can use it without
any problems.
For example, the number of TFT-LCD sub pixels contained in this product are
3,147,264.
Note
• Design and specifications are subject to change without prior notice.
• Attaching a Samsung ID (videowall kit) will increase the weight of an LFD by 1.6 kg.
Specifications Class A (Information Communication equipment for industrial use) : 460UTn-2,
460UTn2-UD2, 460UTn-B
Attention dealers and users. This device is registered for EMC requirements for industrial use
(Class A) and can be used in areas other than general households.
Class B(Information Communication equipment for residential use) : 460UT-2,
460UT-B
This device is registered for EMC requirements for home use (Class B). It can be used in all
areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)
(USA Only)
Dispose unwanted electronics through an approved recycler. To
find the nearest recycling location, go to our website, www.samsung.com/recyclingdirect, or call (877) 278 - 0799
PowerSaver
This LCD Display has a built-in power management system called PowerSaver. This system
saves energy by switching your LCD Display to low-power mode when it has not been used
for a certain amount of time. The LCD Display automatically returns to normal operation when
you press a key on the keyboard. For energy conservation, turn your LCD Display OFF when
it is not needed, or when leaving it unattended for long periods. The PowerSaver system
operates with a VESA DPM compliant video card installed in your computer. Use the software
utility installed on your computer to set up this feature.
PowerSaver
State Normal Operation
Power saving mode
Power off Power off
(Power
Swich)
Power Indicator On Blinking Amber Off
Power Consumption
(Typical)
460UTn-2
460UTn2-
UD2
300 Watts 5 Watts 5 Watts 0 Watts
460UT-2 230 Watts 2 Watts 1 Watts 0 Watts
460UTn-B 260 Watts 5 Watts 5 Watts 0 Watts
460UT-B 195 Watts 2 Watts 1 Watts 0 Watts
Note
• The actual power consumption may be different from the indicated power consumption
above if the system conditions or settings are changed.
• To stop any power consumption, turn off the switch or disconnect the power cable on the
back. Be sure to disconnect the power if you intend to stay away from home for many
hours.
• If you connect a network box (sold separately), the LFD will no longer be in compliance
with Energy Star 5.0.
SpecificationsPreset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes,
the screen will be adjusted automatically. However, if the signal differs, the screen may go
blank while the power LED is on. Refer to the video card manual and adjusts the screen as
follows.
Display Mode Horizontal
Frequency
(kHz)
Vertical Frequency (Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 640 x 350 31.469 70.086 25.175 +/-
IBM, 640 x 480 31.469 59.940 25.175 -/-
IBM, 720 x 400 31.469 70.087 28.322 -/+
MAC, 640 x 480 35.000 66.667 30.240 -/-
MAC, 832 x 624 49.726 74.551 57.284 -/-
MAC, 1152 x 870 68.681 75.062 100.000 -/-
VESA, 640 x 480 37.861 72.809 31.500 -/-
VESA, 640 x 480 37.500 75.000 31.500 -/-
VESA, 800 x 600 35.156 56.250 36.000 +/+
VESA, 800 x 600 37.879 60.317 40.000 +/+
VESA, 800 x 600 48.077 72.188 50.000 +/+
VESA, 800 x 600 46.875 75.000 49.500 +/+
VESA, 848 x 480 31.020 60.000 33.750 +/+
VESA, 1024 x 768 48.363 60.004 65.000 -/-
VESA, 1024 x 768 56.476 70.069 75.000 -/-
VESA, 1024 x 768 60.023 75.029 78.750 +/+
VESA, 1152 x 864 67.500 75.000 108.000 +/+
VESA, 1280 x 768 47.776 59.870 79.500 -/+
VESA, 1280 x 960 60.000 60.000 108.000 +/+
VESA, 1280 x 1024 63.981 60.020 108.000 +/+
VESA, 1280 x 1024 79.976 75.025 135.000 +/+
VESA, 1360 x 768 47.712 60.015 85.500 +/+
VESA, 1366 x 768 47.712 59.790 85.500 +/+
VESA,1600 x 1200 75.000 60.000 162.000 +/+
VESA,1920 x 1080 67.500 60.000 148.500 +/+
Horizontal Frequency
The time to scan one line connecting the right edge
to the left edge of the screen horizontally is called the
Horizontal Cycle and the inverse number of the Horizontal Cycle is called the Horizontal Frequency.
Unit: kHz
Vertical Frequency
Like a fluorescent lamp, the screen has to repeat the
same image many times per second to display an
image to the user. The frequency of this repetition is
Specifications
called the Vertical Frequency or Refresh Rate. Unit:
HzInformation
For a Better Display
Adjust the computer resolution and screen injection rate (refresh rate) on the
computer as described below to enjoy the best picture quality. You can have an
uneven picture quality on screen if the best picture quality is not provided for TFTLCD.
• Resolution: 1366 x 768
• Vertical frequency (refresh rate): 60 Hz
TFT-LCD panels manufactured by using advanced semiconductor technology
with a precision of 1ppm (one millionth) and above is used for this product. But the
pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or
some of black pixels could be seen. This is not from bad quality and you can use
it without any problems.
• For example, the number of TFT-LCD sub pixels contained in this product are
3,147,264.
When cleaning the monitor and the panel outside, please apply a small amount
of water to a soft cloth. Rub softly when cleaning the LCD area.If excessive force
is applied, you may stain it.
If you are not satisfied with the picture quality, you can get better quality of
picture by performing the "Auto Adjustment function" in display screen that is
appeared as window termination button is pressed. If there's still noise after the
automatic adjustment, use the Fine/Coarse adjustment function.
When viewing a fixed screen for an extended period of time, a residual image
or blurriness may appear. Change the mode to energy save or set a screensaver
to move the picture when you need to be away from the monitor for an extended
period of time.
PRODUCT INFORMATION (Image Retention Free)
What is Image Retention ?
Image retention may not occur when a LCD panel is operated under normal conditions.
Normal conditions are defined as continuously changing video patterns. When the
LCD panel is operated for a long time with a fixed pattern (over 12 hours), there
may be slight difference in voltage between electrodes that work the liquid crystal
(LC) in a pixel. The voltage difference between electrodes increases with time,
forcing the liquid crystal to lean. When this occurs, the previous image may be seen
when the pattern is changed. To prevent this, the accumulated voltage difference
must be decreased.Power Off, Screen Saver, or Power Save Mode
• Turn the power off for 2 hours after 12 hours in use
• Set the Monitor to power off with the PC Display Properties Power Scheme.
• Use a Screen saver if possible - Screen saver in one color or a moving image
is recommended.
• The Image Retention Free function applied to the product is recommended.
Change the Color Information periodically
Note
Use Two different colors
Rotate the Color Information with 2 different colors every 30 minutes.
• Avoid using a combination of characters and background color with large difference in luminance.
Avoid using Grey colors, which can cause Image retention easily.
Avoid: Colors with big difference in luminance (Black & White, Grey)
InformationChange the characters color periodically
• Use Bright colors with little difference in luminance.
- Cycle : Change the characters color and background color every 30 minutes
• Every 30 minutes, change the characters with movement.
• Have the images and logo cycle periodically.
- Cycle: Display moving image together with Logo for 60 seconds after 4 hours
in use.
• The best way to protect your monitor from Image retention is to turn the Power
off, or set your PC or System to operate a Screen Saver program when you are
not using it. If these guidelines are not followed, it may affect your warranty.
Apply the Screen Pixel function on Product
• Apply the Screen Pixel function
- Symptom: Dot with Black Color move up and down.
• Apply the Screen Bar function
- Symptom: Horizontal / Vertical Bar with Black Color move up and down.
Apply the Screen Erasing function on Product
Information• Apply the Screen Erasing function
- Symptom: 2 Vertical blocks move while erasing the display
InformationAppendix
Contact SAMSUNG WORLDWIDE
Note
If you have any questions or comments relating to Samsung products, please contact the
SAMSUNG customer care center.
North America
U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com
CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca
http://www.samsung.com/
ca_fr (French)
MEXICO 01-800-SAMSUNG
(726-7864)
http://www.samsung.com
Latin America
ARGENTINA 0800-333-3733 http://www.samsung.com
BRAZIL 0800-124-421
4004-0000
http://www.samsung.com
BOLIVIA 800-10-7260 http://www.samsung.com
CHILE 800-SAMSUNG (726-7864)
From mobile 02-482 82 00
http://www.samsung.com
COLOMBIA 01-8000112112 http://www.samsung.com
COSTA RICA 0-800-507-7267 http://www.samsung.com
DOMINICA 1-800-751-2676 http://www.samsung.com
ECUADOR 1-800-10-7267 http://www.samsung.com
EL SALVADOR 800-6225 http://www.samsung.com
GUATEMALA 1-800-299-0013 http://www.samsung.com
HONDURAS 800-27919267 http://www.samsung.com
JAMAICA 1-800-234-7267 http://www.samsung.com
NICARAGUA 00-1800-5077267 http://www.samsung.com
PANAMA 800-7267 http://www.samsung.com
PERU 0-800-777-08 http://www.samsung.com
PUERTO RICO 1-800-682-3180 http://www.samsung.com
TRINIDAD & TOBAGO
1-800-SAMSUNG (726-7864) http://www.samsung.com
VENEZUELA 0-800-100-5303 http://www.samsung.com
Europe
ALBANIA 42 27 5755 http://www.samsung.com
AUSTRIA 0810 - SAMSUNG (7267864,
€ 0.07/min)
http://www.samsung.com
BELGIUM 02-201-24-18 http://www.samsung.com/be
(Dutch)Europe
http://www.samsung.com/
be_fr (French)
BOSNIA 05 133 1999 http://www.samsung.com
BULGARIA 07001 33 11 http://www.samsung.com
CROATIA 062 SAMSUNG (062 726
7864)
http://www.samsung.com
CZECH 800 - SAMSUNG
(800-726786)
http://www.samsung.com
DENMARK 70 70 19 70 http://www.samsung.com
FINLAND 030 - 6227 515 http://www.samsung.com
FRANCE 01 48 63 00 00 http://www.samsung.com
GERMANY 01805 - SAMSUNG
(726-7864, € 0,14/Min)
http://www.samsung.com
CYPRUS From landline : 8009 4000 http://www.samsung.com
GREECE From landline : 80111-SAMSUNG (7267864)
From landline & mobile : (+30)
210 6897691
http://www.samsung.com
HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.com
ITALIA 800-SAMSUNG (726-7864) http://www.samsung.com
KOSOVO +381 0113216899 http://www.samsung.com
LUXEMBURG 261 03 710 http://www.samsung.com
MACEDONIA 023 207 777 http://www.samsung.com
MONTENEGRO 020 405 888 http://www.samsung.com
NETHERLANDS 0900-SAMSUNG
(0900-7267864) ( € 0,10/Min)
http://www.samsung.com
NORWAY 815-56 480 http://www.samsung.com
POLAND 0 801-1SAMSUNG(172-678)
+48 22 607-93-33
http://www.samsung.com
PORTUGAL 808 20-SAMSUNG (808 20
7267)
http://www.samsung.com
RUMANIA From landline : 08010-SAMSUNG (7267864)
From landline & mobile : (+40)
21 206 01 10
http://www.samsung.com
SERBIA 0700 SAMSUNG (0700 726
7864)
http://www.samsung.com
SLOVAKIA 0800 - SAMSUNG (0800-726
786)
http://www.samsung.com
SPAIN 902 - 1 - SAMSUNG (902 172
678)
http://www.samsung.com
SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com
AppendixEurope
SWITZERLAND 0848 - SAMSUNG (7267864,
CHF 0.08/min)
http://www.samsung.com/ch
http://www.samsung.com/
ch_fr/(French)
U.K 0330 SAMSUNG (7267864) http://www.samsung.com
EIRE 0818 717100 http://www.samsung.com
LITHUANIA 8-800-77777 http://www.samsung.com
LATVIA 8000-7267 http://www.samsung.com
ESTONIA 800-7267 http://www.samsung.com
TURKEY 444 77 11 http://www.samsung.com
CIS
RUSSIA 8-800-555-55-55 http://www.samsung.com
GEORGIA 8-800-555-555 http://www.samsung.com
ARMENIA 0-800-05-555 http://www.samsung.com
AZERBAIJAN 088-55-55-555 http://www.samsung.com
KAZAKHSTAN 8-10-800-500-55-500 (GSM:
7799)
http://www.samsung.com
UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.com
KYRGYZSTAN 00-800-500-55-500 http://www.samsung.com
TADJIKISTAN 8-10-800-500-55-500 http://www.samsung.com
MONGOLIA - http://www.samsung.com
UKRAINE 0-800-502-000 http://www.samsung.com/ua
http://www.samsung.com/
ua_ru
BELARUS 810-800-500-55-500 http://www.samsung.com
MOLDOVA 00-800-500-55-500 http://www.samsung.com
Asia Pacific
AUSTRALIA 1300 362 603 http://www.samsung.com
NEW ZEALAND 0800 SAMSUNG (0800 726
786)
http://www.samsung.com
CHINA 400-810-5858 http://www.samsung.com
HONG KONG (852) 3698 - 4698 http://www.samsung.com/hk
http://www.samsung.com/
hk_en/
INDIA 1800 1100 11
3030 8282
1800 3000 8282
1800 266 8282
http://www.samsung.com
INDONESIA 0800-112-8888
021-5699-7777
http://www.samsung.com
AppendixAsia Pacific
JAPAN 0120-327-527 http://www.samsung.com
MALAYSIA 1800-88-9999 http://www.samsung.com
PHILIPPINES 1-800-10-SAMSUNG
(726-7864) for PLDT
1-800-3-SAMSUNG
(726-7864) for Digitel
1-800-8-SAMSUNG
(726-7864) for Globe
02-5805777
http://www.samsung.com
SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com
THAILAND 1800-29-3232
02-689-3232
http://www.samsung.com
TAIWAN 0800-329-999
0266-026-066
http://www.samsung.com
VIETNAM 1 800 588 889 http://www.samsung.com
Middle East
IRAN 021-8255 http://www.samsung.com
OMAN 800-SAMSUNG (726-7864) http://www.samsung.com
KUWAIT 183-2255 http://www.samsung.com
BAHRAIN 8000-4726 http://www.samsung.com
EGYPT 08000-726786 http://www.samsung.com
JORDAN 800-22273 http://www.samsung.com
MOROCCO 080 100 2255 http://www.samsung.com
SAUDI ARABIA 9200-21230 http://www.samsung.com
U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com
Africa
CAMEROON 7095- 0077 http://www.samsung.com
COTE D'LVOIRE 8000 0077 http://www.samsung.com
GHANA 0800-10077
0302-200077
http://www.samsung.com
KENYA 0800 724 000 http://www.samsung.com
NIGERIA 0800-726-7864 http://www.samsung.com
SENEGAL 800-00-0077 http://www.samsung.com
SOUTH AFRICA 0860-SAMSUNG (726-7864) http://www.samsung.com
TANZANIA 0685 88 99 00 http://www.samsung.com
UGANDA 0800 300 300 http://www.samsung.com
Terms
Dot Pitch The image on a monitor is composed of red, green and blue
dots. The closer the dots, the higher the resolution. The disAppendixtance between two dots of the same color is called the 'Dot
Pitch'. Unit: mm
Vertical Frequency The screen must be redrawn several times per second in
order to create and display an image for the user. The frequency of this repetition per second is called the Vertical
Frequency or Refresh Rate. Unit: Hz
Example: If the same light repeats itself 60 times per second, this is regarded as 60 Hz.
Horizontal Frequency The time to scan one line connecting the right edge to the
left edge of the screen horizontally is called the Horizontal
Cycle. The inverse number of the Horizontal Cycle is called
Horizontal Frequency. Unit: kHz
Interlace and Non-Interlace
Methods
Showing the horizontal lines of the screen from the top to
the bottom sequentially is called the Non-Interlace method
while showing odd lines and then even lines in turn is called
the Interlace method. The Non-Interlace method is used for
the majority of monitors to ensure a clear image. The Interlace method is the same as that used in TVs.
Plug & Play This is a function that provides the best quality screen for
the user by allowing the computer and the monitor to exchange information automatically. This monitor follows the
international standard VESA DDC for the Plug & Play function.
Resolution The number of horizontal and vertical dots used to compose
the screen image is called the 'resolution'. This number
shows the accuracy of the display. A high resolution is good
for performing multiple tasks as more image information can
be shown on the screen.
Example: If the resolution is 1920 x 1080, this means the
screen is composed of 1920 horizontal dots (horizontal resolution) and 1080 vertical lines (vertical resolution).
Correct Disposal
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with
separate collection systems)
This marking on the product, accessories or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable)
should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate these items
from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased
this product, or their local government office, for details of where and how
they can take these items for environmentally safe recycling.
AppendixCorrect Disposal of This Product (Waste Electrical & Electronic Equipment)
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with
separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household
waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium
or lead above the reference levels in EC Directive 2006/66. If batteries
are not properly disposed of, these substances can cause harm to human
health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your
local, free battery return system.
Appendix
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with
separate battery return systems.)
The marking on the battery, manual or packaging indicates that the battery in this product should not be disposed of with other household waste.
Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC
Directive 2006/66.
The battery incorporated in this product is not user replaceable. For information on its replacement, please contact your service provider. Do
not attempt to remove the battery or dispose it in a fire. Do not disassemble, crush, or puncture the battery. If you intend to discard the
product, the waste collection site will take the appropriate measures for
the recycling and treatment of the product, including the battery.Authority
Information in this document is subject to change without notice.
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden.
Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental
or consequential damages in connection with the furnishing, performance, or use of this material.
Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows
and Windows NT are registered trademarks of Microsoft Corporation; VESA, DPM and DDC
are registered trademarks of Video Electronics Standard Association; All other product names
mentioned herein may be the trademarks or registered trademarks of their respective owners.
TruSurround XT, SRS and the symbol are trademarks of SRS
Labs, Inc.
TruSurround XT technology is incorporated under license from SRS
Labs, Inc.
Appendix
SyncMaster 460UTn-2, 460UTn2-UD2, 460UT-2, 460UTn-B, 460UT-B
LCD ディスプレイ
ユーザー マニュアル
色と外観は製品によって異なる場合があり、製品
の仕様は性能の向上のために予告無く変更される
場合があります。安全使用上の注意
本書中のマークの説明
注意
製品を正しく使用して事故および製品の損傷を防止するために、下記の指示に従ってくだ
さい。
警告/注意
このマークの付いた指示に従わなかった場合には、人体への傷害また
は機器の損傷を招くことがあります。
注意
禁止 指示事項
分解禁止
コンセントからプラグを抜い
てください
接触禁止
感電を防ぐために、アースを
行ってください
電源
長期間使用しない場合には、コンピュータを節電モード(DPM)に設定し
ます。
スクリーン セイバーを使用している場合には、アクティブスクリーン
モードに設定します。
破損した電源コードまたはプラグ、破損またはがたつきのある
コンセントを使用しないでください。
• 漏電または火災の原因となることがあります。
コンセントにプラグを抜き差しするときに、濡れた手で電源プ
ラグに触れないでください。
• 感電の原因となることがあります。
電源コードは、アースされたコンセントに接続してください。
• 漏電または傷害の原因となることがあります。
電源プラグはコンセントにしっかりと正しく差し込みます。
• 火災の原因となることがあります。電源プラグや電源コードを無理に曲げたり引っ張らないでくだ
さい。また、電源プラグや電源コードに重い物を乗せないでくだ
さい。
• 火災の原因となることがあります。
同じコンセントに複数の電気製品を接続しないでください。
• 過熱による火災の原因となることがあります。
製品の使用中は電源コードを外さないでください。
• 感電によるモニターの故障の原因となることがあります。
本体から電源を抜く場合や、コンセントから電源を抜く場合の
ことを考えて、余裕を持って抜き差しができる環境に設置をして
ください。
• 漏電または火災の原因となることがあります。
気
•
電源プラグは、手の届きやすいコンセントに接続してくださ
い。
• 製品に問題が発生したときには、電源プラグを抜いて完全に
電源をオフにする必要があります。製品の電源ボタンだけで
は、電源を完全にオフにすることはできません。
インストール方法
ほこりが多い場所、異常な高温または低温にさらされる場所、湿度の高
い場所、化学溶媒が使用されている場所、および空港や駅など 24 時間
製品を使用する場所に設置する場合には、お客様相談ダイヤルにご相談
ください。
ご相談せずに設置した場合、モニターに重大な損傷が発生することがあ
ります。
製品の移動は必ず 2 人以上で行ってください。
• 落下事故やケガ、製品の破損の原因となることがあります。
キャビネットやラックなど高いところに製品を設置するときに
は、製品がはみ出たりしないようしっかりと安定した状態で設置
してください。
• 落下または傷害の原因になる場合があります。
• 製品に合ったサイズのキャビネットまたはラックを使用して
ください。
安全使用上の注意ろうそく、蚊取り線香、タバコおよびその他の熱源を製品に近
づけないでください。
• 火災の原因となることがあります。
電源コードまたは製品は、熱源となる機器に近づけないでくだ
さい。
• 漏電または火災の原因となることがあります。
本棚やクローゼットなど、換気の悪い場所に設置しないでくだ
さい。
• 内部の温度が上昇して、火災の原因となることがあります。
製品を下ろすときには、手荒に扱わないでください。
• 表示画面が損傷する場合があります。
製品の前面を下にして床に置かないでください。
• 表示画面が損傷する場合があります。
壁掛け金具の設置は、専門の業者が行うようにしてください。
• 落下して傷害の原因になる場合があります。
• 指定された壁掛け金具で設置してください。
製品は、換気が十分に行われる場所に設置してください。壁か
ら 4 インチ (10 cm) 以上離してください。
• 内部の温度が上昇して、火災の原因となることがあります。
梱包材のビニールに、お子様が手を触れないようにしてくださ
い。
• お子様がビニールで遊んでいると、重大な傷害 (窒息) の原
因となることがあります。
モニターの高さ調整の際には指や手を挟まないよう十分ご注意
ください。
• 製品の損傷またはけがをする恐れがあります。
お手入れ
モニターの筐体または TFT-LCD 画面の表面を清掃するときには、少し
湿らせた柔らかい布で拭き取ります。
ほこりなどによりモニター背面の空気穴がつまり、故障を起こす 場合
もありますので定期的な掃除及び点検が必要となります。
安全使用上の注意
食用油 (大豆油など) を使用すると、製品の破損や変形の原因とな
ります。 製品をキッチンやキッチン カウンターの近くに設置しないでください。製品の表面にクリーナーを直接スプレーしないでください。
• 本体の脱色または歪み、画面表面のはがれが発生することが
あります。
電源プラグのピンを清掃するとき、またはコンセントのほこり
を取り除くときは、乾いた布を使用します。
• 火災の原因となることがあります。
製品を清掃するときは、電源コードを切り離してください。
• 感電または火災の原因となることがあります。
製品を清掃するときには、まず電源コードを外して乾いた布で
やさしく拭き取ります。
• (ワックス、ベンゼン、アルコール、シンナー、殺虫剤、潤滑
剤またはクリーナーなどの化学薬品を使用しないでくださ
い)これらの薬品によって、製品表面の外観が変わったり、製
品の表示ラベルがはがれることがあります。
製品の筐体にはキズが付きやすいため、液晶モニター用のクリ
ーニングクロスを使用してください。
製品を清掃するときには、製品本体に水を直接かけないでくだ
さい。
• 水が製品内に入らないようにし、濡れないようにしてくださ
い。
• 感電、火災または故障の原因となることがあります。
その他
この製品は、高電圧を使用しています。絶対にご自身で製品を
分解、修理または改造しないでください。
• 漏電または火災の原因となることがあります。修理が必要な
場合には、お客様相談ダイヤルまでご連絡ください。
製品から異臭や異音、煙が出た場合には、直ちに電源プラグを
抜いてお客様相談ダイヤルにご連絡ください。
• 漏電または火災の原因となることがあります。
製品を湿気、ほこり、煙、水がかかる場所、または自動車の中
に設置しないでください。
• 漏電または火災の原因となることがあります。
製品が落下したり破損した場合には、電源をオフにして電源コ
ードを外し、お客様相談ダイヤルにご連絡ください。
• 漏電または火災の原因となることがあります。
安全使用上の注意雷が発生した場合には、電源コードまたはアンテナ ケーブル
に触れないでください。
• 漏電または火災の原因となることがあります。
配線または信号ケーブルのみを持ってモニターを動かさないで
ください。
• ケーブルが破損して、落下事故、感電、製品の損傷または火
災の原因となることがあります。
電源コードまたは信号ケーブルだけを持って、製品を持ち上げ
たり、前後または左右に動かさないでください。
• ケーブルが破損して、落下事故、感電、製品の損傷または火
災の原因となることがあります。
クロスやカーテンで換気口がふさがれないようにしてくださ
い。
• 内部の温度が上昇して、火災の原因となることがあります。
水の入った容器、花瓶、植木鉢、医薬品や、金属類を製品の上
に置かないでください。
• 製品が水に濡れたり、異物が製品内部に入ったりした場合に
は、電源コードを抜いてからお客様相談ダイヤルにご連絡く
ださい。
• 製品の故障、感電または火災につながる恐れがあります。
可燃性のスプレーまたは可燃物を製品に近づけないでくださ
い。
• 爆発または火災の原因となることがあります。
箸、コイン、ピンおよび刃物などの金属類、マッチや紙などの
可燃物を (換気口、入出力端子などから) 製品の中に入れないで
ください。
• 製品が水に濡れたり、異物が製品内部に入ったりした場合に
は、電源コードを抜いてからお客様相談ダイヤルにご連絡く
ださい。
• 漏電または火災の原因となることがあります。
静止画面を長時間表示し続けると、残像が発生したり画面がぼ
やけたりする場合があります。また、場合によっては液晶パネル
が焼き付けを起こす場合があります。
• 長時間製品を試用しない場合には、スリープ モードにするか
動きのあるのスクリーン セイバーを使用します。
製品に適した解像度および周波数を設定します。
• 視力に影響を与えることがあります。
安全使用上の注意ヘッドフォンまたはイヤフォンを使用するときは、音量を大き
くしすぎないようにしてください。
• 音が大きすぎると、聴覚に影響を与えることがあります。
疲れ目を防止するために、製品に近づきすぎないでください。
モニターを 1 時間使用したら、少なくとも 5 分間の休憩をとり
ます。
疲れ目が軽減されます。
不安定な棚や平らでない面、または振動の多い場所に設置しな
いでください。
• 落下事故やケガ、製品の破損の原因となることがあります。
• 振動の多い場所で製品を使用すると、製品の寿命が短くなっ
たり出火の原因となる場合があります。
製品を移動するときには、電源をオフにして、電源プラグ、ア
ンテナ ケーブル、および製品に接続されているすべてのケーブ
ルを切り離します。
• 感電または火災の原因となることがあります。
お子様が製品にぶら下がったり、よじ登らないようにしてくだ
さい。
• 製品が落下して傷害または死亡事故の原因になる場合があり
ます。
製品を長期間使用しない場合には、コンセントから電源コード
を外してください。
• ほこりがたまって過熱または火災の原因となったり、感電ま
たは漏電の原因となることがあります。
製品に重たいものを乗せたり、小さいお子様が興味を示すよう
なもの(おもちゃやお菓子など)を置いたりしないでください。
• お子様が製品にぶら下がって、落下により傷害または死亡事
故の原因となることがあります。
リモコンから電池を取り外したときには、お子様が電池を口
の中に入れないようにしてください。電池は、子供または乳児の
手の届かない場所に置いてください。
• お子様が電池を口の中に入れたときには、すぐに医師の診察
を受けてください。
電池を交換するときには、正しい極性 (+、‐) の向きに入れ
てください。
• 電池が破損したり、液漏れにより火災、傷害または故障の原
因となることがあります。
安全使用上の注意指定された標準の電池のみを使用し、新しい電池と使用済みの
電池を混在して使用しないでください。
• 電池が破損したり、液漏れにより火災、けがまたは故障の原
因となることがあります。
バッテリ (および充電式バッテリ) は通常の廃棄物ではなく、
リサイクルするために返送する必要があります。使用済みのバッ
テリをリサイクルのために返送する責任はお客様にあります。
• お客様は、使用済みの充電式バッテリを公共のリサイクルセ
ンターまたは同じタイプのバッテリおよび充電式バッテリを
販売している店舗に返送することができます。
直射日光の当たる場所、炎またはヒーターなどの熱源の近くに
製品を置かないでください。
• 製品の寿命が短くなったり、火災の原因となることがありま
す。
製品の上に物を落としたり、製品に衝撃を与えないでくださ
い。
• 漏電または火災の原因となることがあります。
製品の近くで加湿器を使用しないでください。
• 漏電または火災の原因となることがあります。
ガス漏れがあった場合には、製品または電源プラグに触れずに
直ちに換気を行ってください。
• 火花が発生すると、爆発または火災が発生することがありま
す。
長時間電源をオンにしていると液晶パネルが高温になりますの
で触れないでください。
特に小さなお子様が触れないよう十分ご注意ください。
製品の角度またはスタンドの高さを調整するときには注意して
ください。
• 手や指を挟まれると、傷害の原因となることがあります。
• また、製品を傾けすぎると、転倒して傷害の原因となること
があります。
製品を子供の手の届く高さに設置しないでください。
• 落下して傷害の原因になる場合があります。
• 製品は前の方が重たくなっているため、水平で安定した面に
設置してください。
安全使用上の注意製品の上に重い物を載せないでください。
• けがや製品の破損の原因となることがあります。
安全使用上の注意はじめに
パッケージ内容
パッケージの内容の確認
上の図に示すように、パッケージの箱からロックを取り外します。
箱の両側にある穴に手をか
けて、箱を持ち上げます。
パッケージの内容を確認し
ます。
発布スチロールとビニール
袋を取り外します。
注意
• パッケージを開いたら、内容を確認してください。
• 製品を運ぶときに必要になりますので、梱包されていた箱は保管しておいてください。
• 不足している品目がある場合には、販売店にお問い合わせください。
• オプション品の購入については、お近くの販売店にお問い合わせください。
同梱物
LCD ディスプレイマニュアル類
クイック セットアップ ガ
イド
保証書
(含まれていない地域もあ
ります)
ユーザー マニュアル
MagicInfo ソフトウェア
DVD
(460UTn-2, 460UTn2-UD2,
460UTn-B モデルのみ)
ケーブル
電源コード D‐Sub ケーブル
その他
リモートコントロール
(BP59-00138B)
バッテリ (AAA X 2)
(含まれていない地域もあ
ります)
別売り
(別売を行わない地域もあります)
セミ スタンド キット LAN ケーブル USB ケーブル
(460UTn-2, 460UTn2-UD2,
460UTn-B モデルのみ)
はじめに別売り
(別売を行わない地域もあります)
RGB to BNC ケーブル RGB to Component ケーブ
ル
NetWork ボックス
(460UT-2, 460UT-B モデル
のみ)
ウォール マウント キット TV チューナー ボックス
(米国のみ)
注意
製品と共に購入可能なアクセサリは、お住まいの国によって異なります。
お使いの LCD ディスプレイ
前面
SOURCE ボタン
PC モードからビデオモードに切り替えます。外部デバイスが接続されて
いる入力信号を選択します。
[PC] → [DVI] → [AV] → [コンポ一ネント] → [HDMI1] → [HDMI2]
→ [ディスプレイ ポート] → [MagicInfo] →[TV]
注意
• TV を使用するには、TV チューナー ボックス (別売り) を接続する
必要があります。(米国のみ)
• 460UT-2, 460UT-B モデルで MagicInfo を使用するには、ネットワー
ク ボックス (別売り) を接続する必要があります。
POWER ボタン
はじめにこのボタンで、LCD ディスプレイの電源のオン/オフを切り替えます。
電源インジケーター
緑色に点滅して PowerSaver モードであることを示します
注意
省電力機能の詳細については、このマニュアルの「PowerSaver」を参照
してください。消費電力を押さえるために、必要ない場合または長時間
LCD ディスプレイから離れる場合にはモニターをオフにします。
リモートカラーセンサー
リモコンを LCD ディスプレイのこの部分に向けます。
背面
注意
ケーブル接続の詳細については、「接続」のセクションを参照してください。LCD ディス
プレイの背面の構成は、モデルによって若干異なる場合があります。
POWER S/W ON [ │ ] / OFF
LCD ディスプレイのオン/オフを切り替えま
す。
POWER
LCD ディスプレイと壁のコンセントに電源
コードを接続します。
IR OUT/IN
リモコンからの信号を受信して、リムーバ
ブル センサー ボードが接続されたときに
はループアウトを通じて信号を送信します。
AMBIENT SENSOR IN
リムーバブル センサー ボードに電源を供
給し、光センサーからの信号を受信します。
はじめに DVI OUT (LOOPOUT)
• モニターを DVI、DVI to HDMI ケーブル
を使用して別のモニターに接続します。
• DVI または DVI‐HDMI ケーブルを製品
の [DVI OUT (LOOPOUT)] と別のモニタ
ーの [DVI IN] または [HDMI IN] に接
続します。
• [DVI OUT(LOOPOUT)] ポートから送出さ
れる HDMI およびネットワーク信号は、
[DVI IN] ポートを持つセカンド ディス
プレイに表示されます。
注意
• ループアウト機能を使用して、プライマ
リ ディスプレイの画面を二重化するこ
とができます。プライマリ ディスプレ
イの [DVI OUT] を別のディスプレイの
[DVI IN] または [HDMI] に接続します。
• DVI‐Loopout には (長さ 2m の DVI ケ
ーブルを使用して) 最大 100 台のモニ
ターを接続できます。最大で HD までの
解像度をサポートできます。入力信号
は、DVI IN、HDMI IN 1、および HDMI IN
2 (MagicInfo) に対応しています。
• ケーブルの状態は、Loopout の性能に大
きく影響します。
RGB/COMPONENT IN (PC/COMPONENT 接続
端子 (入力))
• モニターの [RGB/COMPONENT IN] ポート
を PC の RGB ポートに D‐SUB ケーブ
ルを使用して接続します。
• モニターの [RGB/COMPONENT IN] ポート
を外部デバイスの COMPONENT ポートに
RGB to COMPONENT ケーブルを使用して
接続します。
• モニターの [RGB/COMPONENT IN] ポート
を PC の BNC ポートに RGB to BNC ケ
ーブルを使用して接続します。
DVI IN (PC 映像接続端子)
モニターの [DVI IN] ポートを PC の DVI
ポートに DVI ケーブルを使用して接続しま
す。
RGB/DVI/DP/HDMI AUDIO IN (PC/DVI/
DP/HDMI 音声接続端子 (入力))
はじめに別売りのステレオ ケーブルを使用して、モ
ニターの [RGB/DVI/DP/HDMI AUDIO IN] 端
子とお使いのコンピュータのサウンド カー
ドのスピーカー出力端子を接続します。
DP IN
ディスプレイ ポートからの信号を受信しま
す。
DP ケーブルを製品の [DP IN] と別のディ
スプレイの DP IN に接続します。
AV/COMPONENT AUDIO IN [R-AUDIO-L]
モニターの [AV/COMPONENT AUDIO IN [RAUDIO-L]] ポートを PC または外部デバイ
スの音声出力ポートにオーディオ ケーブル
を使用して接続します。
AV IN
ビデオ ケーブルを使用して、モニターの
[AV IN] 端子を外部デバイスのビデオ出力
端子に接続します。
AUDIO OUT
ヘッドフォンまたは外部スピーカーを接続
します。
DC OUT
[DC OUT] 端子が承認済みの TV チューナ
ー ボックス に接続されていることを確認
します。(米国のみ)
製品が損傷する場合があります。
HDMI IN 1
• HDMI ケーブルを使用して、LCD ディス
プレイ背面の [HDMI IN 1] 端子をお使
いのデジタル出力デバイスの HDMI 端子
に接続します。
• HDMI 1.3 までをサポートしています。
注意
• 通常の外部デバイス (DVD プレーヤーや
レコーダーなど) や TV チューナー ボ
ックスを [HDMI IN 1] 端子に接続でき
ます。
はじめに• TV チューナー ボックス (米国のみ) を
使用する場合は、[HDMI IN 1] 端子に接
続してください。
HDMI IN 2 (MAGICINFO)
• HDMI ケーブルを使用して、LCD ディス
プレイ背面の [HDMI IN 2 (MAGICINFO)] 端子をお使いのデジタル出力デバ
イスの HDMI 端子に接続します。
• HDMI 1.3 までをサポートしています。
注意
MAGICINFO OUT ポートは、[HDMI IN 2 (MAGICINFO)] ポートに接続しなければなりませ
ん。
RJ 45 MDC (MDC PORT)
MDC (マルチディスプレイ コントロール)
プログラム ポート
LAN ケーブルを製品の [RJ45 MDC] と PC
の LAN に接続します。MDC を使用するに
は、PC に MDC プログラムがインストール
されている必要があります。
注意
マルチコントロール に移動して、MDC 接
続 として RJ45 MDC を選択します。
RS232C OUT/IN (RS232C シリアル ポー
ト)
MDC (マルチディスプレイ コントロール)
プログラム ポート
シリアル ケーブル (クロス タイプ) を製
品の [RS232C] と PC の RS232C に接続し
ます。MDC を使用するには、PC に MDC プ
ログラムがインストールされている必要が
あります。
注意
マルチコントロール に移動して、MDC 接
続 として RS232C MDC を選択します。
はじめに RGB OUT
MagicInfo ビデオ出力ポート
注意
460UTn-2, 460UTn2-UD2, 460UTn-B モデル
のみ。
MAGICINFO OUT
MagicInfo の DP 信号を出力します。 DP to
HDMI ケーブルで [HDMI IN 2 (MAGICINFO)] に接続する必要があります。
LAN (LAN 接続端子)
LAN ケーブルに接続して、MagicInfo モー
ドでのインターネットまたはネットワーク
アクセスを可能にします。
注意
460UTn-2, 460UTn2-UD2, 460UTn-B モデル
のみ。
USB(USB 接続端子)
キーボード/マウス、マス ストレージ機器
対応。
注意
460UTn-2, 460UTn2-UD2, 460UTn-B モデル
のみ。
Kensington Lock slot
Kensington ロックは、公共の場所で製品を
安全に使用できるようにロックすることが
できる盗難防止用の装置です。固定装置の
形状と使用方法はモデルおよびメーカーに
よって異なるため、詳細については固定装
置に付属するユーザー マニュアルを参照し
てください。
製品をロックするには以下の手順に
従います。
1. Kensington ロック ケーブルを、デス
クや椅子など大きくて動かない物体に
かけます。
2. ロックのついたケーブルの端を Kensington ロック ケーブルの端の輪に通
します。
はじめに3. ケンジントン ロックをディスプレイ背
面にあるセキュリティ スロット ( )
に挿入します。
4. ロックします ( )。
注意
• Kensington ロックを別途購入する必要
があります。
• これは一般的な説明です。詳細について
は、ロック装置に付属するユーザー マ
ニュアルを参照してください。
• 固定装置の購入につきましてはお買い上
げいただいたお店にご確認ください。
注意
ケーブル接続の詳細については、「接続」のセクションを参照してください。
リモートコントロール
注意
• リモコンの動作は TV またはその他 LCD ディスプレイ付近で動作している電子機器の
影響を受ける場合があり、周波数の干渉によって誤作動することがあります。
• TV を使用するには、TV チューナー ボックス (別売り) を接続する必要があります。
(米国のみ)
POWER
OFF
ダイヤルパッド
/ GUIDE ボタン
+ VOL -
SOURCE
D.MENU
TOOLS
上下左右ボタン
INFO
色ボタンと PC/DVI/HDMI/DP 選択ボタン
TTX/MIX
MTS/DUAL
ENTER/PRE-CH
MUTE
CH/P
はじめにTV
MENU
RETURN
EXIT
MagicInfo
POWER
製品をオンにします。
OFF 製品をオフにします。
ダイヤルパッド OSD の調整時、または MagicInfo を使用するときにパス
ワードを入力するのに使用します。
押してチャンネルを変更します。
/ GUIDE ボタン 「‐」ボタンはデジタル チャンネルの選択に使用します。
電子番組ガイド (EPG) 表示
‐ この機能はこの LCD ディスプレイでは動作しません。
+ VOL - 音声の音量を調整します。
SOURCE 接続されている外部入力信号または MagicInfo モードを
選択します。
ボタンを押して、入力信号 SOURCE を切り換えます。
SOURCE の変更は、変更時に LCD ディスプレイに接続され
ている外部デバイスについてのみ行うことができます
D.MENU
DTV メニュー表示
‐ この機能はこの LCD ディスプレイでは動作しません。
TOOLS よく使う機能を素早く選択するのに使用します。
‐ この機能はこの LCD ディスプレイでは動作しません。
上下左右ボタン ひとつのメニューから別のメニューに横方向、縦方向に移
動したり、選択したメニューの値を調整したりします。
INFO 画面左上に現在の画像情報が表示されます。
色ボタンと PC/DVI/
HDMI/DP 選択ボタン
TV モードでは、これらのボタンを使用して、デジタル チ
ャンネルの放送通知機能を設定できます。
TV モード以外のモードでは、PC、DVI、HDMI または DP
(ディスプレイ ポート) 外部入力を直接選択できます。
TTX/MIX
TV チャンネルは、テレテキスト経由で文字情報サービスを
提供します。
‐ テレテキスト ボタン
はじめに‐ TV チューナー ボックスがインストールされていると
きに有効になります。
MTS/DUAL
MTS‐
MTS (マルチチャンネル テレビ ステレオ) モードを選択
できます。
音声タイプ MTS/S_Mode デフォルト
FM ステレオ モノラル モノラル 手動変更
ステレオ モノラル ↔ステ
レオ
SAP モノラル ↔ SAP モノラル
DUAL‐
STEREO/MONO、DUAL l / DUAL ll および MONO/NICAM MONO/
NICAM STEREO は、放送のタイプに応じて TV の視聴中に
リモコンの DUAL ボタンで操作することができます。
‐ TV チューナー ボックスがインストールされていると
きに有効になります。
ENTER/PRE-CH このボタンを使用して、前のチャンネルに直ちに戻りま
す。
‐ TV チューナー ボックスがインストールされていると
きに有効になります。
MUTE
音声の出力を一時的に停止(ミュート)します。これは画
面の左下隅に表示されます。消音モードで MUTE または -
VOL + が押されると、音声が再度聞こえるようになりま
す。
CH/P
TV モードで、TV のチャンネルを選択します。
‐ TV チューナー ボックスがインストールされていると
きに有効になります。
TV
TV モードを直接選択します。
‐ TV チューナー ボックスがインストールされていると
きに有効になります。
MENU オンスクリーン メニューを開いたり、メニューを終了し
たり、調整メニューを閉じたりします。
RETURN
前のメニューに戻ります。
EXIT
メニュー画面を終了します。
MagicInfo
MagicInfo クイック起動ボタン
注意
MagicInfo をサポートしない製品では、このボタンが無効
になっています。
はじめに物理的レイアウト
物理的レイアウト
LCD ディスプレイ ヘッド
はじめにオプションスタンド(別売品 : 別売を行わない地域もあります)
• VESA を取り付けるときには、国際 VESA 規格に準拠してください。
• VESA ブラケットの購入と設置についての情報:お近くの SAMSUNG 販売店にご注文くだ
さい。ご注文後、取り付け担当者がお伺いし、ブラケットの取り付けを行います。
• LCD ディスプレイを運搬するには、少なくとも 2 名の人員が必要です。
• SAMSUNG は、お客様による取り付けによって発生した損害および負傷について、責任を
負うものではありません。
寸法
注意
ブラケットを壁に固定するには、6 mm 径で長さ 8~ 12 mm のネジだけを使用するようにし
てください。
ウォールブラケットの取り付け
• ウォールブラケットの取り付けについては、技術者にご相談ください。
• お客様が自ら取り付けを行った場合には、SAMSUNG Electronics は製品の損傷およびお
客様の傷害について責任を負いかねます。
• この製品は、セメント製の壁に設置するためのものです。この製品は、合板または木製
の壁に取り付けることはできません。
はじめに部品
製品に付属している部品およびアクセサリのみを使用してください。
ウォール ブラケット
(1)
ヒンジ (左1、右1) プラスチ
ック ハ
ン ガ ー
(4)
ネジ (A)
(11)
ネジ (B)
(4)
ア ン カ
ー (11)
ウォール ブラケット アセンブリ
注意
ヒンジは 2個(左用または右用)あります。該当する方を使用してください。
1. 固定ネジを矢印の向きに挿入して固定します。
固定したら、ウォールブラケットを壁に取り付けます。
ヒンジは 2個(左用または右用)あります。該当する方を使用してください。
A ‐ 固定ネジ
B ‐ ウォールブラケット
C ‐ ヒンジ (左)
D ‐ ヒンジ (右)
2. 壁にドリルで穴を開ける前に、製品の背面にある 2 カ所の固定穴が適切な間隔になっ
ていることを確認してください。
長さが短い、または長い場合には、ウォールブラケットの 4 本のネジを緩めて調整を
行います。
はじめにA ‐ 2 カ所の固定穴の間隔
3. 取り付け図を見て、壁にドリルで穴を開ける位置に印を付けます。5.0 mm のビットを
使用して、35 mm より深い穴を開けます。 各アンカーを対応する穴に固定します。ブ
ラケットとヒンジの穴をそれぞれ該当するアンカー穴に合わせ、挿入して 11 本のネ
ジ (A) で固定します。
ウォール ブラケットに製品を取り付けるには
製品の形状はモデルによって異なります。(プラスティックハンガーおよびネジは同じで
す)
1. 製品の背面にある 4 本のネジを取り外します。
はじめに2. ネジ (B) をプラスチックハンガーに挿入します。
注意
• ウォールブラケットに製品を取り付けたら、左右のプラスチックハンガーに正しく
固定されていることを確認してください。
• 製品をブラケットに取り付けるときには、穴に指が挟まれないように注意してくだ
さい。
• ウォールブラケットが壁にしっかりと固定されていることを確認してください。取
り付け後に製品が動いてしまうことがあります。
3. 手順 2 で取り付けた 4 本のネジ (プラスチック ハンガー + ネジ (B)) を、製品の
背面の穴に固定します。
4. 安全ピン (3) を取り外して 4 個の製品ホルダーを対応するブラケット ホール (1)
に挿入します。続いて、製品 (2) をブラケットにしっかりと固定されるように配置し
ます。安全ピン (3) をしっかりと最挿入して締め付け、製品をブラケットに固定しま
す。
はじめにA ‐ LCD ディスプレイ
B ‐ ウォールブラケット
C ‐ 壁
ウォール ブラケットの角度調整
壁に取り付ける前に、ブラケットの角度を ‐2˚ に調整してください。
1. 製品をウォールブラケットに固定します。
2. 製品の上部中央を持ち、前(矢印の方向)に引っ張って角度を調整します。
注意
ブラケットの角度は ‐2˚~ 15˚ の範囲で調整できます。
角度を調整する際に、製品の側面を持たないようにしてください。必ず製品の上部中央を
持ってください。
はじめに接続
コンピュータの接続
コンピュータをモニターに接続するにはいくつかの方法があります。以
下のオプションから選択してください。
ビデオカードの D‐sub(アナログ)コネクタを使用します。
• D‐sub は、LCD ディスプレイ背面の 15‐pin の [RGB/COMPONENT
IN] ポートとコンピュータの 15‐pin D‐sub ポートを接続します。
ビデオカードの DVI(デジタル)コネクタを使用します。
• DVI ケーブルは、LCD ディスプレイ背面の [DVI IN] ポートとコンピ
ュータの DVI ポートを接続します。
ビデオカードの DP(デジタル)コネクタを使用します。
• LCD ディスプレイの [DP IN] ポートと PC の DP ポートを DP ケー
ブルを使用して接続します。注意
HDMI ケーブルで PC と接続したときには、入力信号として HDMI2
(460UT-2, 460UT-B モデルの場合のみ) または HDMI1 を選択します。
PC からの画像と音声を正常に出力するには、外部入力名編集 で PC を
選択する前に HDMI2 (460UT‐2, 460UT‐B モデルのみ) または HDMI1
を選択します。
DVI 装置 が選択されているときに音声を有効にするには、ステップ
( ) を使用して接続されていることを確認します。
LCD ディスプレイのオーディオ ケーブルを LCD ディスプレイ背面のオ
ーディオ ポートに接続します。
LCD ディスプレイの電源コードを LCD ディスプレイ背面の電源ポートに
接続します。電源スイッチをオンにします。
注意
オプション品の購入については、SAMSUNG のお近くの販売店にお問い合わせください。
他のデバイスへの接続
注意
• お使いのコンピュータだけでなく、DVD プレイヤー、VCR またはカムコーダーなどの AV
入力機器を LCD ディスプレイに接続することができます。AV 入力デバイスの接続の詳
細については、「LCD ディスプレイの調整」の内容を参照してください。
• LCD ディスプレイの背面の構成は、LCD ディスプレイのモデルによって若干異なる場合
があります。
外部モニターの接続
接続
ビデオカードの HDMI(デジタル)コネクタを使用します。
• LCD ディスプレイの [HDMI IN 1] ポートと PC の HDMI ポートを
HDMI ケーブルを使用して接続します。LCD モニターの [DVI OUT(LOOPOUT)] ポートと別のモニターの入力ポー
トを DVI ケーブルで接続します。
LCD モニターの [AUDIO OUT] ポートと別のモニターの入力ポートを DVI
ケーブルで接続します。
注意
[DVI OUT] に接続されている外部モニターの入力信号として、DVI モードを選択します。
DVI OUT は HDCP をサポートしていません。
AV デバイスの接続
1. オーディオ ケーブルを製品の [AV/COMPONENT AUDIO IN [R-AUDIO-L]]
と VCR や DVD プレイヤーなどの外部デバイスのオーディオ ポートに接
続します。
2. ビデオ ケーブルを製品の [AV IN] と外部デバイスのビデオ出力ポート
に接続します。
3. 次に、DVD またはテープを挿入して、DVD、VCR、またはカムコーダーを
スタートさせます。
4. 製品またはリモコンの SOURCE を押して「AV」を選択します。
注意
お使いのコンピュータだけでなく、DVD プレイヤー、VCR またはカムコーダーなどの AV
入力機器を LCD ディスプレイに接続することができます。AV 入力デバイスの接続の詳細
については、「LCD ディスプレイの調整」の内容を参照してください。
接続カムコーダーへの接続
1. カムコーダーの AV 出力ジャックの場所を確認します。通常は、カムコ
ーダーの側面または背面にあります。カムコーダーの VIDEO OUTPUT ジ
ャックと LCD ディスプレイの [AV IN] をビデオ ケーブルで接続しま
す。
2. オーディオ ケーブルをカムコーダーの AUDIO OUTPUT ジャックと LCD
ディスプレイの [AV /COMPONENT AUDIO IN [R-AUDIO-L]] に接続します。
3. 製品またはリモコンの SOURCE を押して「AV」を選択します。
4. 続いて、テープを挿入したカムコーダーをスタートします。
注意
ここに示した音声ビデオ ケーブルは、通常カムコーダーに付属しています。
(付属していない場合には、お近くの電器店でご購入ください)
カムコーダーがステレオの場合には、2 本のケーブルを接続する必要があります。
HDMI ケーブルを使用して接続する
接続1. HDMI ケーブルを製品の [HDMI IN 2 (MAGICINFO)] (460UT-2, 460UT-B
モデルのみ) または [HDMI IN 1] とデジタル デバイスの HDMI 出力ポ
ートに接続します。
2. 製品またはリモコンの SOURCE を押して「HDMI1 / HDMI2 (460UT-2,
460UT-B モデルのみ)」を選択します。
注意
HDMI モードでは、PCM フォーマットの音声のみサポートしています。
DVI ‐ HDMI ケーブルを使用して接続する
DVI‐HDMI ケーブルを製品の [HDMI IN 2 (MAGICINFO)] (460UT-2,
460UT-B モデルのみ) または [HDMI IN 1] とデジタル デバイスの DVI
出力ポートに接続します。
RCA ‐ ステレオ (PC 用) ケーブルの赤および白のジャックをデジタル
出力デバイスの同じ色の音声出力端子に接続し、反対側のジャックを LCD
ディスプレイの [RGB/DVI/DP/HDMI AUDIO IN] 端子に接続します。
3. 製品またはリモコンの SOURCE を押して「HDMI1 / HDMI2 (460UT-2,
460UT-B モデルのみ)」を選択します。
接続DVD プレイヤーの接続
RGB to Component ケーブルで LCD ディスプレイの [RGB/COMPONENT
IN] ポートと DVD プレイヤーの PR, Y, PB ジャックを接続します。
オーディオ ケーブルのセットを LCD ディスプレイの [AV/COMPONENT
AUDIO IN [R-AUDIO-L]] と DVD プレイヤーの AUDIO OUT ジャックの間
に接続します。
注意
• 製品またはリモコンの SOURCE を押して「コンポ一ネント」を選択します。
• 次に、DVD ディスクを挿入して DVD プレイヤーをスタートさせます。
• RGB to Component ケーブルはオプションです。
• コンポーネント ビデオについては、お使いの DVD のマニュアルを参照してください。
DTV セット トップ (ケーブル/衛星) ボックスの接続
接続RGB to Component ケーブルで LCD ディスプレイの [RGB/COMPONENT
IN] ポートとセット トップ ボックスの PR, Y, PB ジャックを接続しま
す。
オーディオ ケーブルのセットを LCD ディスプレイの [AV/COMPONENT
AUDIO IN [R-AUDIO-L]] とセット トップ ボックスの AUDIO OUT ジャッ
クの間に接続します。
注意
• 製品またはリモコンの SOURCE を押して「コンポ一ネント」を選択します。
• コンポーネント ビデオについては、お使いのセット トップ ボックスのマニュアルを
参照してください。
オーディオ システムへの接続
1. オーディオ システムの AUX L、R ジャックと LCD ディスプレイの
[AUDIO OUT] をオーディオ ケーブルで接続します。
LAN ケーブルの接続
接続1. 製品の [LAN] ポートと PC の [LAN] ポートを LAN ケーブルで接続しま
す。
注意
USB デバイスの接続
1. マウスやキーボードなどの USB 機器を接続することができます。
注意
460UTn-2, 460UTn2-UD2, 460UTn-B モデルのみ。
接続
460UTn-2, 460UTn2-UD2, 460UTn-B モデルのみ。ソフトウェアの使用
モニター ドライバ
注意
オペレーティング システム が モニタードライバを要求してきたら、このモ
ニターに同梱されている CD-ROM を挿入して下しさい。インストール方法は
オペレーティング システムによって多少異なります。お使いのオペレーティ
ング システムに対応する指示に従ってください。
空のディスクを用意して、以下に示すインターネット Web サイトのドライ
バ プログラム ファイルをダウンロードします。
ハードディスクにコピーしてご利用ください。
インターネット Web サイト:
http://www.samsung.com/
モニター ドライバのインストール (自動)
1. CD を CD-ROM ドライブに挿入します。
2. [Windows] をクリックします。
3. モデル一覧でお使いのモニターのモデルを選択し、["OK" (OK)] をクリックします。
4. 以下のメッセージが表示される場合には、["Continue Anyway" (続行)] ボタンをクリ
ックします。続いて ["OK"] ボタン (Microsoft
®
Windows
®
XP/2000 オペレーティン
グ システム) をクリックします。注意
このモニター ドライバは Microsoft が承認したもので、インストールしてもシステ
ムにダメージを与えることはありません。
承認済みのドライバは、Samsung モニターのホームページに掲載されます。
http://www.samsung.com/
モニター ドライバのインストール (手動)
Microsoft
®
Windows Vista™‚ オペレーティング システム
1. マニュアル CD を CD-ROM ドライブに挿入します。
2.
[ ] (スタート) をクリックし、["Control Panel" (コントロール パネル)] をクリ
ックします。次に、["Appearance and Personalization" (デスクトップのカスタマイ
ズ)] をダブルクリックします。
3. ["Personalization" (個人設定)]、続いて ["Display Settings" (画面の設定)] をク
リックします。
4. ["Advanced Settings..." (詳細設定...)] をクリックします。
5. ["Monitor" (モニタ)] タブで ["Properties" (プロパティ)] をクリックします。
["Properties" (プロパティ)] ボタンが無効になっている場合は、モニターの設定が
ソフトウェアの使用完了していないことを示しています。そのままでも、モニターを使用することは可能
です。
下の図に示すように ["Windows needs..." (Windows の設定が必要です...)] というメ
ッセージが表示された場合には、["Continue" (続行)] をクリックします。
注意
このモニター ドライバーは MS ロゴの承認を受けており、このドライバのインストー
ルによってシステムが破損することはありません。
承認済みのドライバは、Samsung モニターのホームページに掲載されます。
6. ["Update Driver..." (ドライバのアップデート...)] タブで ["Driver" (ドライバ)]
をクリックします。
7. ["Browse my computer for driver software" (コンピュータを参照してドライバ ソ
フトウェアを検索します)] チェックボックスをチェックして、["Let me pick from a
list of device drivers on my computer" (コンピュータ上のデバイス ドライバの一
覧から選択します)] をクリックします。
8. ["Have Disk..." (ディスク使用)] をクリックして、ドライバ セットアップファイル
のあるフォルダ (たとえば D:\Drive) を選択し、[OK] をクリックします。
ソフトウェアの使用9. 画面上のリストからお使いのモニターモデルに一致するモデルを選択し、["Next" (次
へ)] をクリックします。
10. 続いて表示される画面で、["Close" (閉じる)] → ["Close" (閉じる)] → ["OK" (OK)]
→ ["OK" (OK)] をクリックします。
Microsoft
®
Windows
®
XP オペレーティング システム
1. CD を CD‐ROM ドライブに挿入します。
2. 〔スタート〕をクリックし、〔コントロールパネル〕を選択します。
ソフトウェアの使用3. 〔クラシック表示に切り替える〕をクリックし、〔画面〕のアイコンをクリックしま
す。
4. コントロールパネルの〔画面〕をダブルクリックします。
5. 〔画面のプロパティ〕から〔設定〕‐〔詳細設定〕を選択します。
ソフトウェアの使用6. タブの中から〔モニタ〕をクリック。〔プロパティ〕ボタンをクリックし、次の画面
で〔ドライバの更新〕を選択します。
7. 〔ハードウェアの更新ウィザード〕から〔一覧または特定の…〕を選択します。
8. 次の画面で〔検索しないで、インストールするドライバを選択する〕をクリックし、
〔次へ〕進みます。
ソフトウェアの使用9. 〔ディスクを使用〕をクリックします。
10.〔参照〕をクリックすると〔ファイルの場所〕が表示されます。
11.〔ファイルの場所〕で CD‐ROM ドライブを選択し、更に〔Driver〕フォルダをダブルク
リックし、〔開く〕をクリックします。
12.「製造元のファイルのコピー元」に選択したドライブの「Driver」フォルダ名が表示さ
れたら〔OK〕をクリックし、該当するモニタ一のドライバを選択します。〔次へ〕を
クリックします。
ソフトウェアの使用13. ソフトウェアをインストールする画 面から、完了画面に移ります。〔完了〕ボタンを
クリックし、続けて〔閉じる〕をクリックします。
ソフトウェアの使用14. モニタードライバのインストールはこれで完了です。
注意
このモニター ドライバーは MS ロゴの承認を受けており、このドライバのインストー
ルによってシステムが破損することはありません。
承認済みのドライバは、Samsung モニターのホームページに掲載されます。
http://www.samsung.com/
Microsoft
®
Windows
®
2000 オペレーティング システム
モニター上に["Digital Signature Not Found" (デジタル署名が見つかりません)] と表示
された場合は、以下の手順を行います。
1. ["Insert disk" (ディスク挿入)] ウィンドウで ["OK" (OK)] ボタンを選択します。
2. ["File Needed" (必要なファイル)] ウィンドウで ["Browse" (参照)] ボタンをクリ
ックします。
3. A:(D:\Driver) を参照してから ["Open" (開く)] ボタンをクリックし、続いて
["OK" (OK)] ボタンをクリックします。
インストール方法
1. ["Start" (スタート)]、["Setting" (設定)]、["Control Panel" (コントロール パネ
ル)] をクリックします。
2. ["Display" (画面)] アイコンをダブルクリックします。
3. ["Settings" (設定)] タブを選択し、["Advanced" (詳細設定)] ボタンをクリックし
ます。
4. ["Monitor" (モニタ)] を選択します。
ケース 1:["Properties" (プロパティ)] ボタンが有効でない場合には、モニターが適
切に設定されていることを意味します。インストールを中止してください。
ケース 2:["Properties" (プロパティ)] ボタンが有効になっている場合には、["Properties" (プロパティ)] ボタンをクリックして次の手順に進みます。
5. ["Driver" (ドライバ)] をクリックし、続いて ["Update Driver..." (ドライバの更
新...)] をクリックして ["Next" (次へ)] をクリックします。
6. ["Display a list of the known drivers for this device so that I can choose a
specific driver" (このデバイスの既知のドライバを表示して、その一覧から選択す
る)] を選択して ["Next" (次へ)] をクリックし、["Have disk" (ディスク使用)] を
クリックします。
7. ["Browse" (参照)] ボタンをクリックして A:(D:\Driver) を選択します。
8. ["Open" (開く)] ボタンをクリックし、続けて ["OK" (OK)] ボタンをクリックしま
す。
9. お使いのモニターのモデルを選択し、["Next" (次へ)] ボタンをクリックして、さら
に ["Next" (次へ)] ボタンをクリックします。
10. ["Finish" (完了)] ボタンをクリックし、続いて ["Close" (閉じる)] ボタンをクリ
ックします。
ソフトウェアの使用["Digital Signature Not Found" (デジタル署名が見つかりません)] というウィンド
ウが表示された場合には、["Yes" (はい)] ボタンをクリックします。["Finish" (完
了)] ボタンをクリックし、続いて ["Close" (閉じる)] ボタンをクリックします。
Microsoft
®
Windows
®
Millennium オペレーティング システム
1. ["Start" (スタート)]、["Setting" (設定)]、["Control Panel" (コントロール パネ
ル)] をクリックします。
2. ["Display" (画面)] アイコンをダブルクリックします。
3. ["Settings" (設定)] タブを選択し、["Advanced" (詳細設定)] ボタンをクリックし
ます。
4. ["Monitor" (モニタ)] タブを選択します。
5. ["Monitor Type" (モニタ タイプ)] 領域で、["Change" (変更)] ボタンをクリックし
ます
6. ["Specify the location of the driver" (ドライバの場所を指定)] を選択します。
7. ["Display a list of all the driver in a specific location..." (特定の場所にあ
るすべてのドライバ一覧を表示し、インストールドライバを選択する)] を選択し、
["Next" (次へ)] ボタンをクリックします。
8. ["Have Disk" (ディスク使用)] ボタンをクリックします。
9. A:\ (D:\driver) を指定して、["OK" (OK)] ボタンをクリックします。
10. ["Show all devices" (すべてのデバイスを表示)] を選択し、コンピュータに接続さ
れているものに対応するモニターを選択して、["OK" (OK)] をクリックします。
11. [画面のプロパティ] ダイアログボックスが閉じるまで、["Close" (閉じる)] ボタン
をクリックしてから ["OK" (OK)] ボタンをクリックする操作を繰り返します。
Microsoft
®
Windows
®
NT オペレーティング システム
1. ["Start" (スタート)]、["Settings" (設定)]、["Control Panel" (コントロール パ
ネル)] をクリックし、続いて ["Display" (画面)] アイコンをダブルクリックしま
す。
2. [登録情報の表示] ウィンドウで、[設定] タブをクリックしてから ["All Display
Modes" (すべての表示モード)] をクリックします。
3. 使用したいモード (解像度、色数および垂直周波数) を選択し、OK をクリックしま
す。
4. ["Apply" (適用)] ボタンをクリックし、["Test" (テスト)] をクリックして画面が正
常に表示されるか確認します。画面が正常に表示されない場合には、別のモード (解
像度、色数または周波数がより低いモード) に変更します。
注意
[すべての表示モード] にモードが表示されない場合には、ユーザー ガイドのプリセット
タイミング モードを参照して、解像度と 垂直周波数 を選択します。
Linux オペレーティング システム
X-Window を実行するには、システム設定ファイルの一種である X86Config ファイルを作
成する必要があります。
ソフトウェアの使用1. X86Config ファイルを実行した後に表示される最初と 2 番目の画面で ["Enter"] を
押します。
2. 3 番目の画面はマウスの設定用です。
3. コンピュータのマウスを設定します。
4. 次の画面はキーボードの選択用です。
5. お使いのコンピュータのキーボードを設定します。
6. 次の画面はモニターの設定用です。
7. まず、モニターの水平周波数を設定します。(周波数は直接入力することができます)
8. モニターの 垂直周波数 を設定します。(周波数は直接入力することができます)
9. モニターのモデル名を入力します。この情報は、実際の X-Window の実行には影響を
与えません。
10. これでモニターの設定は完了です。その他の必要なハードウェアを設定してから、XWindow を実行します。
ソフトウェアの使用MDC プログラムのイ ンス ト ール/アン イ ンス ト ール
イ ンス ト ール方法
1 CDをCD-ROMド ラ イブに挿入し ます。
2 MDC Unified のイ ンス ト ール プログラムを ク リ ッ ク し ます。
ソ フ ト ウ ェ アのイ ンス ト ール ウ ィ ン ド ウがメ イ ン画面に表示されない場合には、 CD の MDC
フ ォルダにある "MDC Unified" 実行フ ァ イルを使用し てイ ンス ト ールし ます。
3 表示されたイ ンス ト ール ウ ィ ザー ドの画面で "Next" を ク リ ッ ク し ます。
4 表示された "License Agreement" ウ ィ ン ド ウで、 "I accept the terms in the license agreement" を
選択し て、 "Next" を ク リ ッ ク し ます。
5 表示される "Customer Information" ウ ィ ン ド ウで、 すべての情報フ ィ ールド に記入し て "Next"
を ク リ ッ ク し ます。
6 表示される "Destination Folder" ウ ィ ン ド ウで、 プログラムを イ ンス ト ールするデ ィ レ ク ト リ を
選択し て "Next" を ク リ ッ ク し ます。
デ ィ レ ク ト リ パスを指定し ない場合には、 プログラムはデフ ォル ト のデ ィ レ ク ト リ パスにイ
ンス ト ールされます。
7 表示される "Ready to Install the Program" ウ ィ ン ド ウで、 プログラムのイ ンス ト ール先のデ ィ レ
ク ト リ パスを確認し てから "Install" を ク リ ッ ク し ます。
8 イ ンス ト ールの進捗状況が表示されます。
9 表示される "InstallShield Wizard Complete" ウ ィ ン ド ウで "Finish" を ク リ ッ ク し ます。
"Launch MDC Unified" を選択し て "Finish" を ク リ ッ ク し、 MDC プログラムをすぐに実行し ま
す。
10 イ ンス ト ール後には、 デスク ト ッ プ上に MDC Unified シ ョ ー ト カ ッ ト アイ コ ンが作成されます。
MDC の実行アイ コ ンは、 PC システムや製品の仕様によ って表示されないこ とがあ り ま
す。
実行アイ コ ンが表示されない場合には、 F5 を押し て く だ さい。
アン イ ンス ト ール
1 ス ター ト メ ニューの 設定 > コ ン ト ロール パネル を選択し て、 プログラムの追加と削除 をダブ
ルク リ ッ ク し ます。
2 リ ス ト から MDC Unified を選択し て、 変更/削除R を ク リ ッ ク し ます。
MDC のイ ンス ト ールは、 グラ フ ィ ッ ク カー ド、 マザー ボー ド およびネ ッ ト ワークの状態によ って
異な り ます。
!"#$ % &'( )*+,- ./01
23 4 526' 7 89: ; <05=
#>?
@ABCDC :7 6E$9FGHIJKL 32#
@ABCDC: 7 6E89ME #: 7 6EN9 O PQ F9 >? R5=)9STU O 32#
' V )W 7#$ % &'( )*+#X6 Y (&Z[ $\)&>? R5= @ABCDC
: 7 6E89ME]$ % &'( )*+ ^ 4 _ `>?01R5=>?#ab
>?#ab >>?7& O >>?7& Ocde': ; ?7 & O i>? 7 & O >?jk Xlm N9 O no p qrst#>?
u52vw >?xy AAX@z {3|}~h$\)vwfhR5= >?
: 7 6E$)9
9<0>? $\)&01R5= >?}
~h5#f$\)& 7 & O h 99 32E9'}~h$
\)&# W< YHf01R5=
>?7 & Ocde': ; <i>?cde': ; < pp {3|@@ ¡fgRhR
5=p
AX
p
AX 3 ¢ £¤ >?#$)9
9< >?h5# ¥ U O X
f¦ ¢§hR5= >?¨ ¢##"©05= ¥ U O X $)9
9<#
ª|« ¬¬R0¦ ¢§h ¥ U O X s ¢ R5=®¯9Q<
® ¯9Q< 4 °±##jk ²9 £¤ !"# ³01R5=
²9jke': ; <´ % < Y ´] ® ¯9Q<52µk#F M¶ ·¸ 7 R5#
F M¶·¸ 7 £¤01R5=W< Y#¹º»
¼# #½¾fs¿½¾fÀÁ ¿2Âà W< Y ¹º»52"
Äk52# R5= ¹º»¶´< O Å e': ; <´ % < Y ´jk01R5=
¹º»¶´< O ÅÆ#Ç#Å $È ÉE O Å s ¢ R5=ÊË52
1 '¯VÌÍÎ52 &&F9 O Ï '¯VÌÏ AAÐ
z Ñ ® 7 U ®
R5=
2 p ® 7 U ® $ % &'( )*+ÒÓ R5=
>?f@ACDCÔ ÕÖh¿2Âà AA ×Î mÄk R5= >?f¡Ô >?h¿2Âà $ % &'( )*+ u Z[ X
Z[ R5=Ø )<ÙÚ#()6´ O
Ø Q Û9\9 $ % &'( )*+#&·9 F &R'¯VÌ#'¯Ü· % c
d R5=
$\)&ÝÞß >?h¿2$\)&*+R$\)&E9' 7 & O
R5=
&8 Û9EÝÞß $ % &'( )*+#&8 Û9E 7 & O R5=
¥ U O 7 & O àá52$ % &'( )*+£¤ R5=
¥ U O 7 & O #cd ¥ U O ÒÓ âã ¹E9'ä Råæ R5=
çE' O ² U ® '¯VÌ#çE' O ² U ® R5=
4
3
2
1
6
5
1
2
3
4
5
6Ø QÛ9
£¤ $\)èé#e?h$ % &'( )*+#P$E 3 ] ñs ¢ R5=
Z[ê9&èéfe< s ]¿2$ % &'( ) ï #òcd01R5=
¡ð
ó ´ % < Y ´#
?@ '(AÛ901R5=
#z¡A
£¤ $ % &'( )*+##z¡AR R5=
#z¡A B#C#+ }~ ÙÚ#2 Î àá R5=
#z¡ADE#P$E 3 ] F01s¿¼ f¨ ¢ R5=S),
q
AG
£¤ $ % &'( )*+#ÙÚS),àá R5=
vwsjkSN9 O s¿P9 Y q
AGfjkh2 1 Þß s ¢ R
5=
BlH F <0IÐàá01R5=
ÙÚ#N: ; < õö?J#&KF <0àá01R5=
£¤ ÙÚS),#vwÕ01R5=
Aqp$
Ð
BL"àáRMàá R#BlH F < 01R5=
ÙÚ#N: ; < àá52 #ö ¨2N`#) Ø 9#th ® 7 U ® R5=
BL"ÎàáRMàá ^ ÙÚ#N: ; < cd52 pp
p$
Ð ®
7 U ® R5=ëOàá
ëOjkcd01R5=
¥ U O # 7 & O $ % &'( )*+£í0 AA
F M£¤ R5=
£¤ ¥ U O 0#RrrPÞßfSN9 O h¿s¿Âà Q#Þß s ¢ R
5=
#
£¤ $ % &'( )#Rëàá R5=
rP
£¤ $ % &'( )#Sëàá R5=
#q l@
£¤ $ % &'( )*+#?J#&²9¶9#ëìàá R5=
A@ArATr
£¤ $ % &'( )*+#AA@ArATrR R5=:&·Ì#jk
¥ U O # 7 & O $ % &'( )*+£í0 AAÐF M£¤ R5=
ôU
ôU V9WX#YZ52 >?h!"#$ % &'( )*+#Qh[h
,\V9]¢^52# R5=
ôU _$\)&f,\E9'` ¨2ÂÃ #ò s ¢ R5=
ôU
ôUR R5=
Ð
¦ÙÚ#&a£¤ R5=
î
bc&K d+h$ % &'( )*+#"£¤ R5=
e f©#$ % &'( ) d+01R5=
î f¦ ¢gÂÃ ô hR0¦ ¢g01R5=
Full Naturalô
ij&K d+h$ % &'( )*+#"£¤ R5=
e f©#$ % &'( ) d+01R5=
î f¦ ¢gÂÃ ô hR0¦ ¢g01R5=
Aq
$ % &'( )#( )6´ O ÙÚ$ % \)k0jkR ½\cd R5=
ôUfe< jkh¿2 1 AAqlf s ¢ R5=
!"#¥ U O f£¤h¿2Âà î ô#jkf£¤ ¥ U O #( )6´ O Ym52 1
lf s2 ¼ n± ¿=
cd52 ¥ U O £¤ ¿N: ; < Y V U R5=
ÙÚ$ % \)kjk#þP$E 3 ] ñs ¢ R5=
X
X#àá sopf Ø Q Û9ÙÚ hR5=
ôUfmmq s2 X s ¢ R5=
Xfmmq s2 q
AG s2 ¼ n± ¿=
XAG
rs#$ % &'( )#XAG R5=
XA
q
XZ[ê9&£¤ R5=
A
Aq
' V )W 7 R¥ ¶ ?h
5# `¿ÙÚ#2 Î àá R5=
9E#jk
¥ùÛ 7 · %
$ % &'( )*+#ÙÚe?Õ R5 89MEf³s
: 7 6EN9 O ² >?h¿2 ¼ Õ R
5=
C Xf£!52³#$ % &'( )f>?h¿s¿ ¼
Õ R5= XX#£! $ % &'( ) >?52
$9 F#´µ 3 ] $ % &'( )fhs¿¶·
s2 ¼ f¨ ¢ R5=
D $ % &'( )#XXfƬ¬#þ ¨2 ¼ Õ R
5 $ % &'( )# Ø Q Û90Xcd R5=
Ƭ¬#þ#XSN9 O 52$ % &'( )0
XƬ¬#þ0jk sh¸s ¢ R!í=
./ ¿$ % &'( )f#.
/ 7 U Y hs¿=
$ % &'( )#èéfe< s ]¿2 ¼ Õ
¿= :&·Ì
ó9 O #èé&·9 F &¹R5
$ % &'( ) >?hZ[Ho£¤ ¿=
ºö# Ø U ¥9f]¢^
hR5=
./ 3 4 52$ % &'( )f>?h¿2 ¼ Õ
¿=
mrÐRmm rÐfjkh
¿2# ³#- $ % &'
( )f»} e?h$ % &'( ) #Ç0,
¿=
7 P は、<同時画面> が <オン> の場合には <16:9> に変更されます。
ポジション
PIP ウィンドウの Position(位置)を変更します。
透明
PIP ウィンドウの透明度を調整します。
• 高
LCD ディスプレイの調整
:• 中
• 低
• 不透明
外部入力名編集
入力信号の選択を簡単にするために、入力ジャックに接続されている入力機器に名前を付
けます。
VTR / DVD / ケーブル STB / デジタル STB / 衛星放送チューナー / AV レシーバー / DVD
プレーヤー / ゲーム /DVC / DVD コンボ / DVD+HDD / PC / DVI 装置
注意
• ディスプレイ デバイスは外部入力モードによって異なります。
• PC を HDMI 端子に接続しているときは、外部入力名編集 を PC に設定します。その他
の場合には、外部入力名編集 を AV に設定します。ただし、640x480、720P (1280x720)
および 1080p (1920x1080) は AV と PC に共通する信号であるため、外部入力名編集
を入力信号に合わせて設定するようにしてください。
• [映像] メニューは、入力信号と [外部入力名編集] によって変わります。
DVI to HDMI ケーブルを使用して接続する場合は (オーディオとビデオは同時にサポー
トされません)、オーディオ ポートには、別途オーディオ ケーブルを使用して接続す
る必要があります。
PC が接続されている場合は、外部入力名編集 を DVI PC に設定して、接続された PC
からのビデオとオーディオを楽しむことができます。
AV 機器が接続されている場合は、外部入力名編集 を DVI 装置 に設定して、接続され
た AV 機器からのビデオとオーディオを楽しむことができます。
ソース自動切り替え設定
ソース自動切り替え が オン の状態でディスプレイをオンにしたとき、前に選択していた
ビデオ入力信号がない場合には、ディスプレイは自動的に別のアクティブなビデオ入力信
号を探します。
注意
• TV 信号がアクティブ(TV チューナーがディスプレイに接続されている)な場合、ソー
ス自動切り替え 検索機能は無効になります。ディスプレイは TV 信号のままになりま
す。
• ソース自動切り替え の選択と 同時画面 機能:ソース自動切り替え 選択が オン に設
定されている場合、同時画面 機能は動作しません。同時画面 機能を動作させるには、
ソース自動切り替え 選択を オフ にする必要があります。
LCD ディスプレイの調整• ソース自動切り替え 選択が オン のとき、または プライマリ ソースの復元 が オン
のときには、ディスプレイの省電力モードは無効になります。
• プライマリ ソースの復元 が オン のときには、プライマリ ソース および セカンダ
リ ソース 選択のみが利用でき、お好みに応じて入れ換えて選択することができます。
それぞれのプライマリ入力信号に対応する信号については 同時画面 > 外部入力 を参
照してください。
ソース自動切り替え
ソース自動切り替え が オン のときには、ディスプレイのビデオ信号が自動的にアクティ
ブなビデオを検索します。
現在の入力信号が認識できない場合には、プライマリ ソース 選択が有効になります。セ
カンダリ ソース 選択は、使用できるプライマリのビデオ信号がない場合に有効になりま
す。プライマリまたはセカンダリの信号が認識できない場合には、ディスプレイは再度検
索を行い、有効なビデオ信号が見つからなければディスプレイは入力信号がないことを示
すメッセージを表示します。
プライマリ ソース 選択が すべて に設定されているときは、ディスプレイはすべてのビ
デオ入力信号を 2 回連続して検索してアクティブなビデオ信号を探し、ビデオが見つから
ない場合には最初のビデオ信号に戻ります。
1. オフ
2. オン
プライマリ ソースの復元
プライマリ ソースの復元 が オン のときには、プライマリ ソース および セカンダリ
ソース のビデオ信号選択を検索してアクティブなビデオ信号を探します。
アクティブなビデオが見つかった場合には プライマリ ソース が選択され、ビデオが見つ
からない場合には セカンダリ ソース が選択されます。セカンダリ ソース にもビデオが
見つからない場合には、入力信号がないことを示すメッセージが表示されます。
1. オフ
2. オン
LCD ディスプレイの調整プライマリ ソース
自動入力信号に プライマリ ソース を指定します。
セカンダリ ソース
自動入力信号に セカンダリ ソース を指定します。
映像 [PC / DVI / ディスプレイ ポート / MagicInfo モード]
利用できるモード
• PC / DVI / ディスプレイ ポート
• AV
• コンポ一ネント
• HDMI
• MagicInfo
• TV
注意
• TV を使用するには、TV チューナー ボックス (別売り) を接続する必要があります。
(米国のみ)
• 460UT-2, 460UT-B モデルの場合、 MagicInfo は、ネットワーク ボックスが接続され
ているときにのみ有効にすることができます。
LCD ディスプレイの調整モード
注意
ダイナミックコントラスト が オン に設定されているときには使用できません。
1. 情報
正確な情報の伝達用に推奨されます (公開情報など)。
2. 広告
広告の表示用に推奨されます (ビデオ、屋内または屋外広告など)。
3. ユーザー調整
ユーザー調整
オンスクリーン メニューを使用して、コントラストおよび明るさを好みに合わせて変更す
ることができます。
注意
• ユーザー調整 機能を使用して画像を調整すると、MagicBright は ユーザー調整 モー
ドに変わります。
• ダイナミックコントラスト が オン に設定されているときには使用できません。
1. コントラスト
コントラストを調整します。
2. 明るさ
輝度を調整します。
3. シャープネス
シャープネスを調整します。
4. ガンマ
LCD ディスプレイの調整映像の中間域の明るさ (ガンマ) を調整します。
• ナチュラル
• モード 1
映像を ナチュラル よりも明るく設定します。
• モード 2
映像を モード 1 よりも暗く設定します。
• モード 3
明るい色と暗い色の間のコントラストを強くします。
色温度
注意
ダイナミックコントラスト が オン に設定されているときには使用できません。
色温度を変更できます。
1. オフ
2. 青色系
3. 標準
4. 赤色系
5. ユーザー調整
注意
[色温度] を [青色系]、[標準]、[赤色系] または [ユーザー調整] に設定すると、Color
Temp. 機能が無効になります。
色温度 を オフ に設定している場合は、カラー調整 機能は無効になります。
LCD ディスプレイの調整カラー調整
赤、緑、青のそれぞれの色バランスを調整します。
注意
ダイナミックコントラスト が オン に設定されているときには使用できません。
1. 赤
2. 緑
3. 青
Color Temp.
Color Temp. は、画像の色の「暖かさ」を示す指標です。
注意
• ダイナミックコントラスト が オン に設定されているときには使用できません。
• この機能は、色温度 が オフ に設定されている場合にのみ有効になります。
画面調整
画面調整 は、ゆらぎやちらつきのある不安定な映像の原因となるノイズを取り除くことに
より、最適な映像を得るための微調整に使用します。細密調整を使用して満足な結果が得
られない場合には、粗調整による調整を行ってから再度細密調整を行ってください。
注意
PC モードでのみ使用可。
粗調整
縦縞などのノイズを除去します。粗調整では、画面イメージ領域が移動する場合がありま
す。水平コントロール メニューを使用して、中央に位置を合わせることができます。
微調整
横縞などのノイズを除去します。細密調整後もノイズが残る場合は、周波数 (クロック速
度) の調整を行ってから、調整し直してください。
LCD ディスプレイの調整ポジション
画面の水平および垂直位置を調整します。
自動調整
微調整、粗調整、ポジション の値は自動的に調整されます。コントロールパネルで解像度
を変更すると、自動機能が実行されます。
注意
PC モードでのみ使用可。
信号バランス
信号ケーブルが長いため弱くなっている RGB 信号を補強します。
注意
• ダイナミックコントラスト が オン に設定されているときには使用できません。
• PC モードでのみ使用可。
信号バランス
信号バランスは オン または オフ のいずれかを選択します。
信号制御
注意
信号バランス が オン になっているときに使用できます。
1. R ゲイン
2. G ゲイン
LCD ディスプレイの調整3. B ゲイン
4. R オフセット
5. G オフセット
6. B オフセット
サイズ
サイズ は切り替えられます。
1. 16:9
2. 4:3
PIP 映像
PIP 画面設定を調整します。
注意
• 利用できるモード:同時画面 オン
1. コントラスト
画面上の PIP ウィンドウのコントラストを調整します。
2. 明るさ
画面上の PIP ウィンドウの明るさを調整します。
3. シャープネス
LCD ディスプレイの調整画面の PIP ウィンドウのシャープネスを調整します。
4. 色の濃さ
画面の PIP ウィンドウの色を調整します。
注意
同時画面 入力は、AV、HDMI または コンポ一ネント モードでのみ動作します。
5. 色あい
ナチュラルトーンを PIP ウィンドウに追加します。
注意
同時画面 入力は、AV、HDMI または コンポ一ネント モードでのみ動作します。
ダイナミックコントラスト
ダイナミックコントラスト は、画像信号の分布を自動的に検出して、最適なコントラスト
となるように調整します。
1. オフ
2. オン
注意
同時画面 が オン になっているときには無効になります。
ライト調整
エネルギー消費を抑えるため、インバーター ランプを調整します。
注意
ダイナミックコントラスト が オン に設定されているときには使用できません。
映像リセット
LCD ディスプレイの調整画面の設定をリセットします。
映像 [ AV / HDMI / コンポ一ネント / TV モード]
利用できるモード
• PC / DVI / ディスプレイ ポート
• AV
• コンポ一ネント
• HDMI
• MagicInfo
• TV
注意
• TV を使用するには、TV チューナー ボックス (別売り) を接続する必要があります。
(米国のみ)
• 460UT-2, 460UT-B モデルの場合、 MagicInfo は、ネットワーク ボックスが接続され
ているときにのみ有効にすることができます。
モード
LCD ディスプレイには、(「ダイナミック」、「標準」、「映画」および「ユーザー調
整」) の 4 種類の自動映像設定が工場出荷時に設定されています。
ダイナミック、標準、映画、または ユーザー調整 を有効にできます。
注意
ダイナミックコントラスト が オン に設定されているときには使用できません。
1. ダイナミック
2. 標準
3. 映画
4. ユーザー調整
ユーザー調整
オンスクリーン メニューを使用して、コントラストおよび明るさを好みに合わせて変更す
ることができます。
LCD ディスプレイの調整注意
ダイナミックコントラスト が オン に設定されているときには使用できません。
コントラスト
コントラストを調整します。
明るさ
輝度を調整します。
シャープネス
画像のシャープネスを調整します。
色の濃さ
画像の色を調整します。
色あい
ナチュラルトーンを表示に追加します。
注意
ビデオ信号が NTSC の場合にのみ動作
色温度
色温度を変更できます。個々の色成分もユーザーが調整することができます。
注意
ダイナミックコントラスト が オン に設定されているときには使用できません。
1. オフ
LCD ディスプレイの調整2. 青色系2
3. 青色系1
4. 標準
5. 赤色系1
6. 赤色系2
注意
色温度 を 青色系2、青色系1、標準、赤色系1、または 赤色系2 に設定すると、Color
Temp. 機能が無効になります。
Color Temp.
Color Temp. は、画像の色の「暖かさ」を示す指標です。
注意
この機能は、モード が ユーザー調整 に設定され、ダイナミックコントラスト と 色温
度 が オフ の場合に有効になります。
サイズ
サイズ は切り替えられます。
PC モード (PC、HDMI[PC タイミング]): 16:9 ‐ 4:3
Video モード (HDMI [ビデオ タイミング]、AV または コンポ一ネント):16:9 ‐ ズーム
1 ‐ ズーム 2 ‐ 4:3 ‐ 全画面表示 ‐ ユーザー調整
1. 16:9 ‐ 映像を 16:9 ワイド モードに設定します。
2. ズーム 1‐ 画面上の映像のサイズを拡大します。
3. ズーム 2‐「ズーム 1」を超える映像のサイズを拡大します。
4. 4:3 ‐ 映像を 4:3 ノーマル モードに設定します。
5. 全画面表示 ‐ HDMI 720p、1080i、1080p 信号が入力されているときは、入力される
画面が中断されることなく表示されます。
6. ユーザー調整 ‐ 好みに合わせて解像度を変更します。
LCD ディスプレイの調整注意
• 全画面表示 機能を使用しているときでも、仕様を外れる表示を行う一部の外部デバイ
スでは画面が途切れる場合があります。
• ズーム 1、ズーム 2 は HDMI モードでは使用できません。
• ポジション および リセット 機能は ズーム 1 または ズーム 2 モードでのみ使用でき
ます。
デジタル NR (Digital Noise Reduction)
デジタル ノイズ リダクション機能の オフ/オン を切り替えます。デジタル ノイズ リダ
クション機能によって、よりきれいではっきりした画像をお楽しみいただけます。
1. オフ
2. オン
注意
デジタル NR 機能は、解像度によっては使用できない場合があります。
HDMI 黒レベル
DVD またはセットトップボックスが HDMI を経由してテレビに接続されている場合、接続
している外部デバイスによっては、ブラックレベルの上昇、コントラストの低下、変色な
どの画質の低下の原因となることがあります。この場合には、HDMI 黒レベル を設定して
テレビの画質を調整してください。
1. 標準
2. 低
注意
PC と HDMI モードの DTV の両方で使用できるタイミングについては、HDMI 黒レベル が有
効になります。
LCD ディスプレイの調整フィルムモード
フィルムモード では、(24 フレームの) 映画で発生することのある不自然な映像のキャリ
ブレーションを行います。
このモードを有効にすると、動く字幕が正常に表示されないことがあります。
(HDMI モードでは、入力信号がインターレース スキャンの場合にこの機能を使用できま
す。プログレッシブ スキャン信号では使用できません)
1. オフ
2. オン
PIP 映像
同時画面 画面設定を調整します。
注意
利用できるモード:同時画面 オン
1. コントラスト
画面上の PIP ウィンドウのコントラストを調整します。
2. 明るさ
画面上の PIP ウィンドウの明るさを調整します。
3. シャープネス
画面の PIP ウィンドウのシャープネスを調整します。
ダイナミックコントラスト
LCD ディスプレイの調整ダイナミックコントラスト は、画像信号の分布を自動的に検出して、最適なコントラスト
となるように調整します。
1. オフ
2. オン
注意
同時画面 が オン になっているときには無効になります。
ライト調整
エネルギー消費を抑えるため、インバーター ランプを調整します。
注意
ダイナミックコントラスト が オン に設定されているときには使用できません。
映像リセット
画面の設定をリセットします。
音声
利用できるモード
• PC / DVI / ディスプレイ ポート
• AV
• コンポ一ネント
• HDMI
• MagicInfo
• TV
注意
• TV を使用するには、TV チューナー ボックス (別売り) を接続する必要があります。
(米国のみ)
• 460UT-2, 460UT-B モデルの場合、 MagicInfo は、ネットワーク ボックスが接続され
ているときにのみ有効にすることができます。
LCD ディスプレイの調整モード
LCD ディスプレイには、Hi‐Fi ステレオアンプが内蔵されています。
1. 標準
工場出荷時の標準設定にするには [標準] を選択します。
2. 音楽
ミュージック ビデオまたはコンサートを視聴するには [音楽] を選択します。
3. 映画
映画を観るには [映画] を選択します。
4. ニュース
ほとんどが会話の番組 (ニュースなど) を視聴するときには、ニュース を選択しま
す。
5. ユーザー調整
好みに合わせて設定を調整するには、ユーザー調整 を選択します。
ユーザー調整
好みに合わせて音声設定を調整することができます。
注意
• 調整の際は、音量が 0 に設定されていても音声が鳴ります。
• ユーザー調整 機能を使用して音声の調整を行うと、ユーザー調整 が モード モードに
なります。
低音
周波数の低い音声を強調します。
高音
周波数の高い音声を強調します。
バランス
LCD ディスプレイの調整左右のスピーカーの音声バランスを調整できます。
自動音量
放送局による音量レベルの差を小さくします。
1. オフ
2. オン
SRS TS XT
SRS TS XT は、2 台のスピーカーで 5.1 チャンネルのコンテンツを再生するときの問題を
解決する特許取得済みの SRS 技術です。TruSurround XT は、テレビの内蔵スピーカーな
どのスピーカー 2 台で構成される再生システムで、素晴らしい仮想サラウンド音声環境を
実現します。すべてのマルチチャンネル フォーマットと完全な互換性があります。
1. オフ
2. オン
音声選択
同時画面 モードで、プライマリまたはセカンダリ表示のいずれかの音声を有効にします。
注意
同時画面 が オン になっているときに使用できます。
1. 主画面
2. 副画面
LCD ディスプレイの調整サウンド リセット
音声の設定をリセットします。
設定
利用できるモード
• PC / DVI / ディスプレイ ポート
• AV
• コンポ一ネント
• HDMI
• MagicInfo
• TV
注意
• TV を使用するには、TV チューナー ボックス (別売り) を接続する必要があります。
(米国のみ)
• 460UT-2, 460UT-B モデルの場合、 MagicInfo は、ネットワーク ボックスが接続され
ているときにのみ有効にすることができます。
言語
13 つの言語のいずれかを選択できます。
注意
言語の選択は、OSD の言語にのみ反映されます。コンピュータ上で実行されるソフトウェ
アには影響しません。
時刻
時刻設定、スリープ タイマー、タイマー 1 / タイマー 2 / タイマー 3 および 休日の管
理 を設定できます。
LCD ディスプレイの調整時刻設定
現在の時刻を設定します。
スリープ タイマー
所定の時間が経過したら LCD ディスプレイを自動的にオフにします。
1. オフ
2. 30
3. 60
4. 90
5. 120
6. 150
7. 180
タイマー 1 / タイマー 2 / タイマー 3
LCD ディスプレイを指定した時間にオンまたはオフにするよう設定できます。
注意
• :休日にはタイマーを無効にするには 適用 を、休日にもタイマーを有効にす
るには 適用しない を選択します。
• 時刻設定 メニューを使用して時刻を設定した場合にのみ有効です。
LCD ディスプレイの調整
休日• Manual オプションを使用して、曜日を選択できます。
休日の管理
• 追加
休日を登録できます。
• 選択した日を削除
選択した休日を削除できます。
注意
• 登録された休日が選択されている場合にのみ有効です。
• 複数の休日を選択して削除できます。
• すべて削除
登録された休日をすべて削除できます。
LCD ディスプレイの調整メニューの背景透明度
OSD の背景の透明度を変更します。
1. 高
2. 中
3. 低
4. 不透明
安全ロック
PIN の変更
パスワードは変更できます。
プリセットされている LCD ディスプレイのパスワードは「0000」です。
注意
パスワードを忘れた場合には、リモコンの INFO →EXIT → MUTE ボタンを押してパスワー
ドを「0000」にリセットします。
ロック使用
これは、OSD をロックして設定状態を維持し、他のユーザーが現在の設定を変更できない
ようにする機能です。
LCD ディスプレイの調整省電力
この機能は、省エネのためにユニットの電力消費の調整を行います。
1. オフ
2. オン
画像分割
画像分割 は、各スクリーンが画面全体の一部になるように表示したり、同じ画像を各スク
リーンに繰り返し表示できるように接続されたビデオスクリーンのセットです。
画像分割 がオンになっているときには、画像分割 画面の設定を調整することができます。
注意
• 水平 または 垂直 の分割数が 4 を超える場合には、画質の劣化を防ぐために XGA (1024
x 768) 以上の解像度を使用してくただい。
• サイズ は 画像分割 の実行中は無効になります。
• 同時画面 が オン になっているときには無効になります。
画像分割
選択したディスプレイの 画像分割 機能のオン/オフを切り替えます。
• オフ
• オン
フォーマット
LCD ディスプレイの調整分割したスクリーンを表示する フォーマット を選択できます。
• フルモード
マージン無しで全画面表示を行います。
• ナチュラルモード
元の縦横比を維持したまま自然な映像を表示します。
水平
水平方向に画面をいくつの部分に分割するかを設定します。
15 段階の調整レベル: 1~15.
注意
垂直 が 15 に設定されている場合、水平 の最大値は 6 です。
垂直
垂直方向に画面をいくつの部分に分割するかを設定します。
15 段階の調整レベル: 1~15.
注意
水平 が 15 に設定されている場合、垂直 の最大値は 6 です。
画面の位置
LCD ディスプレイの調整スクリーンを複数の画像に分割できます。分割するときのレイアウトとともに、分割する
画面数を選択できます。
• 画面の位置 でモードを選択します。
• ディスプレイ選択でディスプレイを選択します。
• 選択したモードの数字を押すと、配置が設定されます。
• 画面は最大 100 個の小画面に分割できます。
注意
5 台以上のディスプレイが接続されている場合には、画質の低下を防ぐために XGA
(1024*768) 以上の解像度にすることをお勧めします。
画面保護
画面保護 機能は、静止画が画面上に長時間表示されたときに発生することのある残像を防
止するのに使用します。
注意
この機能は、電源がオフになっているときには使用できません。
ピクセル シフト
ピクセル シフト
LCD 上のピクセルを水平または垂直方向に動かすこの機能を使用して、画面に残像が発生
するのを防止することができます。
• オフ
• オン
水平
画面を水平方向に何ピクセル移動するか設定します。
画像分割は:0, 1, 2, 3, および 4.
LCD ディスプレイの調整垂直
画面を垂直方向に何ピクセル移動するか設定します。
画像分割は:0, 1, 2, 3, および 4.
時間
それぞれ、水平または垂直方向の動作を実行する間隔を設定します。
タイマー
タイマー
画面焼き付き防止のタイマーを設定することができます。
残像を消去するための処理を開始する場合には、処理は設定された時間行われ、自動的に
完了します。
• オフ
• オン
モード
LCD ディスプレイの調整画面保護 タイプを変更できます。
• バー
• 消しゴム
• ピクセル
間隔
この機能を使用して、各モード セットにおける実行間隔をタイマーに設定します。
時間
設定された間隔の範囲内で、実行する時間を指定します。
• モード ‐ バー, 消しゴム, ピクセル :10~50 秒
バー
この機能を使用して、長い黒白の垂直線を動かすことにより、画面上に残像が発生するの
を防止します。
消しゴム
LCD ディスプレイの調整この機能は、長方形のパターンを動かすことによって画面上に残像が発生するのを防止し
ます。
ピクセル
この機能は、画面上で多数のピクセルを動かすことによって残像を防止します。
サイドグレー
画面背景のグレーの明るさを選択します。
• オフ
• 明るくする
• 暗くする
解像度の選択
コンピュータのグラフィックカードの解像度を 1024 x 768 @ 60Hz、1280 x 768 @ 60Hz、
1360 x 768 @ 60Hz または 1366 x768 @ 60Hz に設定したときに画面が正常に表示されない
場合は、この機能(Resolution Select)を使用して指定した解像度で画面を表示すること
ができます。
注意
PC モードでのみ使用可。
1. オフ
2. 1024 X 768
LCD ディスプレイの調整3. 1280 X 768
4. 1360 x 768
5. 1366 X 768
注意
メニューの選択は、画面解像度が 1024 x 768 @ 60Hz、1280 x 768 @ 60Hz、1360 x 768 @
60Hz または 1366 x768 @ 60Hz に設定されているときにのみ可能です。
電源オン調整
画面の Power On time(電源がオンになる時間)を調整します。
警告:過電圧を避けるために、Power On time(電源がオンになる時間)を長く設定します。
OSD 回転
OSD の回転
1. ランドスケープ
2. ポートレイト
詳細設定
さらに詳細な設定を行います。
ファン & 温度
ファンの速度と内部の温度を検知して、製品を保護します。
LCD ディスプレイの調整ファン制御
ファン速度設定は、自動または手動のいずれかを選択します。
ファン速度の設定
ファンの速度を 0 ~ 100 の範囲で設定します。
注意
ファン制御 が 手動 になっているときに使用できます。
温度制御
製品内部の温度を検知して、目的の温度を指定します。
製品はデフォルトでは 77˚C に設定されています。
注意
• 指定した温度を超えると映像が暗くなり、温度が上がり続ける場合には製品の電源が自
動的にオフになって過熱を防止します。
• この製品を使用するには、75~80˚C の温度が最適です (室温 40˚C の場合)。
使用条件の詳細については、記載されている「仕様」を参照してください。
• 温度制御 の設定を変更するときには、ファン制御 を 自動 に設定します。
LCD ディスプレイの調整現在の温度
製品の現在の温度を表示します。
自動電源設定
製品の 自動電源設定 の有効/無効を切り替えます。
• オフ
• オン
注意
自動電源設定 が オン になっているときには、製品は電源に接続されると直ちにオンにな
ります。
ボタン ロック
製品のモニター制御ボタンをロック/ロック解除します。
• オフ
• オン
LCD ディスプレイの調整自動補正(ユーザー)
1. 自動カラー補正
色を自動で調整します。
2. リセット
色の設定をリセットします。
注意
PC モードでのみ有効になります。
スタンバイ制御
入力信号が検出されないときに動作するスタンバイ モードを設定します。
• オフ
入力信号が検出されないときには <信号がありません> というメッセージが表示されま
す。
• オン
入力信号が検出されない場合は省電力モードになります。
• 自動
入力信号が検出されないときには、
‐ 外部デバイスが接続されているときには省電力モードになります。
‐ 外部デバイスが接続されていないときには <信号がありません> というメッセージ
が表示されます。
注意
• PC、DVI、HDMI、または ディスプレイ ポート モードでのみ有効になります。
• HDMI ソースの選択時は、この機能の 設定は機能しません。
LCD ディスプレイの調整ランプ スケジュール
指定された時刻に、ユーザー指定の値に明るさを調整します。
OSD ディスプレイ
画面上のメニュー項目の表示/非表示を切り替えます。
ソース OSD
• オフ
• オン
非最適化 OSD モード
• オフ
• オン
OSD 信号なし
LCD ディスプレイの調整• オフ
• オン
MDC OSD
• オフ
• オン
ソフトウェア更新
ソフトウェアの更新を行います。
1. DVI または HDMI などのデジタル信号を使用して製品をコンピュータに接続します。
SW コードから変換された BMP 画像ファイルをクリックします。製品の画面に下に示
すような画像が表示されます。
2. ソフトウェア コードが変換された BMP 画像が画面に表示されている間に、[ソフトウ
ェア更新] を選択します。
注意
複数の BMP 画像がある場合は、スライドショーを使用して画面に表示されます。
• スライドショーでの BMP 画像の再生間隔を 1 秒に設定することをお勧めします。
他の再生間隔では、画像を正常に抽出できないことがあります。
• 別の画像 (マウス ポインタなど) が重なっている場合は、BMP 画像を正常に抽出
できないことがあります。
3. 現在のソフトウェア バージョンよりも新しいバージョンが検出された場合は、現在の
ソフトウェアをアップグレードするかどうか確認を求められます。<オン> を選択した
場合は、アップグレードが実行されます。
4. ソフトウェア アップグレードの完了後、製品の電源が自動的にオフになってから、オ
ンになります。
LCD ディスプレイの調整注意
• これは、DVI、HDMI1 または HDMI2 モードなどのデジタル信号の場合にのみ機能しま
す。(入力解像度はパネル解像度と同じにする必要があります。)
• HDMI1 および HDMI2 モードでは、PC と TV の両方で使用されるタイミング値は、外部
入力名編集 が PC または DVI PC に設定されている場合にのみサポートされます。
• これは、サイズ が 16:9 に設定されている場合にのみサポートされます。
セットアップをリセット
すべての設定値をリセットします。
すべてリセット
ディスプレイのすべての設定をリセットします。
マルチコントロール
利用できるモード
• PC / DVI / ディスプレイ ポート
• AV
• コンポ一ネント
• HDMI
• MagicInfo
• TV
注意
• TV を使用するには、TV チューナー ボックス (別売り) を接続する必要があります。
(米国のみ)
• 460UT-2, 460UT-B モデルの場合、 MagicInfo は、ネットワーク ボックスが接続され
ているときにのみ有効にすることができます。
LCD ディスプレイの調整マルチコントロール
SET に個別の ID を割り当てます。
• ID 設定
SET に固有の ID を割り当てます。
• ID 入力
SET ごとに送信機の機能を選択します。送信機設定に対応する ID を持つ SET のみが
有効になります。
• MDC 接続
MDC 入力を受信するポートを選択します。
• RS232C MDC ケーブルを経由して MDC と通信します。
• RJ45 MDC ケーブルを経由して MDC と通信します。
• ネットワーク設定
• IP 設定 :手動, 自動
• IP アドレス :IP 設定 が 手動 に設定されている場合は、IP アドレス を手動で入
力します。
• サブネット マスク :IP 設定 が 手動 に設定されている場合は、サブネット マス
ク を手動で入力します。
• ゲートウェイ :IP 設定 が 手動 に設定されている場合は、ゲートウェイ を手動で
入力します。
MagicInfo
利用できるモード
• PC / DVI / ディスプレイ ポート
• AV
• コンポ一ネント
• HDMI
• MagicInfo
• TV
LCD ディスプレイの調整注意
• TV を使用するには、TV チューナー ボックス (別売り) を接続する必要があります。
(米国のみ)
• 460UT-2, 460UT-B モデルの場合、 MagicInfo は、ネットワーク ボックスが接続され
ているときにのみ有効にすることができます。
注意
• リモコンを使用して、MagicInfo を選択することができます。ただし MagicInfo を十
分に活用するには、別売りの USB キーボードを使用することをお勧めします。
• Device モードの MagicInfo では、外部デバイスを起動中に移動するとエラーの原因と
なる場合があります。外部デバイスの設定は、LCD ディスプレイがオンになっていると
きにのみ行います。
• ネットワークに使用されている LAN ケーブル(例:ビデオ表示)を外さないでくださ
い。外した場合には、プログラム (MagicInfo) が停止することがあります。ケーブル
を外したら、システムを再起動してください。
• USB 機器に使用されている LAN ケーブル (例: ビデオ表示) を外さないでください。
外した場合には、プログラム (MagicInfo) が停止することがあります。
• 他の入力信号に切り替えるには、MagicInfo の SOURCE ボタンを押します。
• プリセットされている LCD ディスプレイのパスワードは「000000」です。
• サーバー プログラムの Power‐On オプションは、LCD ディスプレイの電源が完全にオ
フになっている場合にのみ機能します。
LCD ディスプレイのシステムエラーの原因となる場合がありますので、LCD ディスプレ
イの終了中に Power‐On オプションを使用しないようにしてください。
• MagicInfo を MagicInfo Server プログラムとともに使用するとき:Network モードを
実行します。
• デバイスが LCD ディスプレイに直接接続されているときに MagicInfo を使用している
場合:Device モードを実行します。
• ESC を押して、MagicInfo ウィンドウ画面に直接移動します。
• Windows の画面で MagicInfo を設定するには、キーボードとマウスが必要になります。
• Windows で MagicInfo を設定する方法については、MagicInfo Server のヘルプを参照
してください。
操作中は、AC 電源をオフにしないことを強く推奨します。
• ピボット機能のある LCD ディスプレイでは、透明チッカーはサポートされていません。
• ピボット機能のある LCD ディスプレイでは、720*480 (SD) までの動画の画面解像度が
サポートされています。
• ドライブ D: には、EWF は適用されません。
• EWF が Enable 状態のときに変更された設定内容を保存するには、その内容を Commit
する必要があります。
• Disable、Enable または Commit を選択すると、システムが再起動します。
LCD ディスプレイの調整MagicInfo
1. Select Application - step 1
Windows を軌道したときにコンピュータで実行するアプリケーションを選択できます。
2. Select TCP/IP - step 2
MagicInfo Setup Wizard の step 2 では、TCP/IP の設定を行うためにデスクトップのネ
ットワーク設定に移動する必要はありません。MagicInfo のインストールの step 2 のみ
を行います。
3. Select Language - step 3
LCD ディスプレイの調整複数の言語を使用するときには、使用する言語を選択することができます。
4. Select Screen Type - step 4
デバイスに適用する回転のタイプを選択できます。
5. Setup Information
LCD ディスプレイの調整
注意
デフォルトの言語は英語に設定されています。オンスクリーン メニュー言語に英語を使用する場
合、言語を選択する必要はありません。ユーザーが選択した設定を表示します。
注意
Magicinfo アイコンが通知領域に表示されない場合には、Windows デスクトップで Magicinfo アイコンをダブルクリックしてください。アイコンが表示されます。
LCD ディスプレイの調整トラブルシューティング
セルフテスト機能チェック
注意
お問い合わせの前に、以下の項目についてチェックしてください。問題が解決しない場合
には、お客様相談ダイヤルにお問い合わせください。
セルフテスト機能チェック
1. コンピュータと LCD ディスプレイの両方をオフにします。
2. コンピュータの背面からビデオケーブルを取り外します。
3. LCD ディスプレイをオンにします。
ビデオ信号が検出されない場合でも LCD ディスプレイが正常に動作しているときに
は、下記の図 (「信号がありません」) が黒色の背景で表示されます。自己テスト モ
ードでは、LED 電源インジケータは緑色のままで、画像が画面内を動き回ります。
4. LCD ディスプレイをオフにして、ビデオ ケーブルを接続しなおします。次にコンピュ
ータと LCD ディスプレイの両方をオンにします。
前の手順を行った後でも LCD ディスプレイ画面に何も映らない場合は、ビデオ コントロ
ーラおよびコンピュータ システムをチェックしてください。LCD ディスプレイは正常に動
作しています。
警告メッセージ
画面は 1920 x 1080 の解像度でも表示することができます。 ただし、「画面の解像度を
変更するか、現在のモードのままにすることができます」というメッセージが短時間表示
されます。周波数が 85Hz を越える場合には、LCD ディスプレイでは 85Hz を越える周波
数をサポートしていないため、黒色の画面が表示されます。
注意
LCD ディスプレイがサポートしている解像度または周波数については、仕様 > プリセッ
ト タイミング モードを参照してください。
メンテナンスと清掃
1) LCD ディスプレイ筐体のメンテナンス
電源コードを抜いてから、柔らかい布で拭き取ります。• ベンゼン、シンナーまたはその他の引火性物質を使
用しないでください。
2) フラットパネルディスプレイ画面のメンテナンス
柔らかい布 (綿ネル) で拭き取ります。
• アセトン、ベンゼンまたはシンナーは使用してはな
りません。
(スクリーン表面の傷または劣化の原因となること
があります)
• これらの物質を使用したことによって発生した損害
は、すべてユーザーの責任となります。
症状と推奨される措置
注意
LCD ディスプレイは、コンピュータから受信した視覚信号を再生します。したがって、コン
ピュータまたはビデオカードに問題がある場合には、色彩の異常、ノイズなどのトラブル
が発生することがあります。この場合には、まず問題の原因をチェックしてから、お客様
相談ダイヤルまたは販売店にお問い合わせください。
1. 電源コードおよびビデオ ケーブルがコンピュータに正しく接続されているかどうかを
チェックします。
2. 起動時にコンピュータからビープ音が 3 回聞こえるかチェックします。
(この場合にはお問い合わせください)
3. ビデオカードを自分でインストールするか PC を組み立てた場合には、アダプタ (ビデ
オ) がインストールされているかどうか確認します。
4. ビデオ画面のスキャン速度が 50~ 85Hz の範囲内にあるかどうかチェックします。
(最大解像度を使用しているときは、60 Hz を超えてはなりません)
5. アダプタ (ビデオ) ドライバのインストールに問題がある場合には、コンピュータを
セーフ モードで起動して、[Control Panel (コントロール パネル)] → [System (シ
ステム)] → [Device Manger (デバイス マネージャ)] でディスプレイ アダプタを削
除して、コンピュータを再起動してアダプタ (ビデオ) ドライバを再インストールし
ます。
チェックリスト
注意
• 以下の表は、発生する可能性のある問題とその解決方法を示しています。お客様相談ダ
イヤルへ連絡する前に、このセクションに解決法が記載されていないかご確認くださ
い。不明な点がある場合には、お客様相談窓口にお電話いただくか、販売店にお問い合
わせください。
インストールに関する問題 (PC モード)
注意
LCD ディスプレイのインストールに関連する問題とその解決方法が記載されています。
トラブルシューティングQ: LCD ディスプレイの画面がちらつく。
A: コンピュータと LCD ディスプレイとの間を接続している信号ケーブルが、しっかり
と接続されているか確認します。
(コンピュータの接続を参照)
画面に関する問題
注意
LCD ディスプレイの画面に関連する問題とその解決方法が記載されています。
Q: 画面が空白になり、電源インジケータがオフになる。
A: 電源コードをしっかりと接続してから LCD ディスプレイをオンにします。
(コンピュータの接続を参照)
Q: "信号がありません」というメッセージ。
A: PC またはビデオ ソースに信号ケーブルがしっかり接続されていることを確認しま
す。
(コンピュータの接続を参照)
A: PC またはビデオ ソースがオンになっていることを確認します。
Q: "最適なモードが選択されていません」というメッセージ。
A: ビデオ アダプタの最大解像度と周波数を確認します。
A: プリセット タイミング モードのチャートに記載されているデータとこれらの値を比
較します。
Q: 映像が縦に流れる。
A: 信号ケーブルがしっかりと接続されているか確認します。必要に応じて再度接続しま
す。
(コンピュータの接続を参照)
Q: 画像がはっきりしない。画像がぼやける。
A: 微調整 の 粗調整 および 微調整 調整を実行します。
A: すべてのアクセサリ (ビデオ拡張ケーブルなど) を取り外してから再度オンにしま
す。
A: 解像度と周波数を推奨の範囲に設定します。
Q: 画像が安定せず、揺れる。
A: コンピュータのビデオ カードに対して設定した解像度および周波数が、LCD ディス
プレイがサポートしている範囲から外れていないか確認します。外れていない場合に
は、LCD ディスプレイのメニューとプリセット タイミング モードに記載されている
現在の情報を参照して再度設定します。
Q: 映像にゴーストが発生する。
A: コンピュータのビデオ カードに対して設定した解像度および周波数が、LCD ディス
プレイがサポートしている範囲から外れていないか確認します。外れていない場合に
トラブルシューティングは、LCD ディスプレイのメニューとプリセット タイミング モードに記載されている
現在の情報を参照して再度設定します。
Q: 映像が明るすぎる、または暗すぎる。
A: 明るさ と コントラスト を調整します。
(明るさ、コントラスト を参照してください)
Q: 画面の色が正しくない。
A: OSD カラー調整メニューの [ユーザー調整] を使用して、色を調整します。
Q: 暗い影によってカラー画像が歪む。
A: OSD カラー調整メニューの [ユーザー調整] を使用して、色を調整します。
Q: 白色が正しく表示されません。
A: OSD カラー調整メニューの [ユーザー調整] を使用して、色を調整します。
Q: 電源インジケータが点滅する。
A: LCD ディスプレイが OSD メモリに変更された設定を保存しています。
Q: 画面が点滅し、電源インジケータが 0.5 ~ 1 秒間隔で点滅します。
A: LCD ディスプレイが電源管理システムを使用しています。キーボードのいずれかのキ
ーを押します。
音声に関する問題
注意
音声信号に関する問題とその解決方法を以下に示します。
Q: 音声が聞こえない。
A: LCD ディスプレイの音声入力ポートとサウンドカードの音声出力ポートにオーディオ
ケーブルがしっかりと接続されていることを確認します。
(コンピュータの接続を参照)
A: 音量レベルをチェックします。
Q: 音量が低すぎる。
A: 音量レベルをチェックします。
A: 音量を最大に調整しても音が小さすぎる場合には、コンピュータのサウンドカードま
たはソフトウェアプログラムの音量コントロールをチェックします。
Q: 音量が大きすぎるか小さすぎる。
A: 高音 および 低音 を適切なレベルに調整します。
リモコンに関する問題
注意
リモコンに関連する問題とその解決方法が記載されています。
Q: リモコンのボタンが応答しない。
トラブルシューティングA: バッテリの極性 (+/‐) を確認します。
A: バッテリが消耗していないかチェックします。
A: 電源がオンになっているかどうかをチェックします。
A: 電源コードがしっかりと接続されているか確認します。
A: 付近に特殊な蛍光灯またはネオン ランプがないかチェックします。
Q & A
Q: 周波数の変更方法は?
A: 周波数は、ビデオ カードの再設定によって変更することができます。
注意
ビデオ カードでサポートされている周波数は、使用しているドライバのバージョン
によって異なることにご注意ください。(詳細はコンピュータまたはビデオカードの
マニュアルを参照してください)
Q: 解像度の変更方法は?
A: Windows XP:
[コントロール パネル] → [デスクトップの表示とテーマ] → [画面] → [設定]。
A: Windows ME/2000:
[コントロール パネル] → [画面] → [設定]。
* 詳細についてはビデオカードのメーカーにお問い合わせください。
Q: 省電力機能の設定方法は?
A: Windows XP:
[コントロール パネル] → [デスクトップの表示とテーマ] → [画面] → [スクリー
ン セーバー]。
コンピュータの BIOS 設定で機能を設定します。(Windows/コンピュータのマニュア
ルを参照してください)
A: Windows ME/2000:
コントロール パネル → 画面 → スクリーンセイバー。
コンピュータの BIOS 設定で機能を設定します。(Windows/コンピュータのマニュア
ルを参照してください)
Q: 筐体/LCD パネルをきれいにしたいのですが?
A: 電源コードを抜き、LCD ディスプレイを柔らかい布で洗剤また真水を使って清掃しま
す。
洗剤が残ったままにしたり、筐体を傷つけないようにしてください。水が LCD ディ
スプレイの中に入らないようにしてください。
Q: ビデオの再生方法は?
トラブルシューティングA: ビデオは、MPEG1 および WMV コーデックのみをサポートしています。ビデオを再生す
るには、対応するコーデックをインストールします。互換性がないコーデックがある
ことに注意してください。
注意
お客様相談ダイヤルへ連絡する前に、このセクションに解決法が記載されていないかご確
認ください。不明な点がある場合には、お客様相談窓口にお電話いただくか、販売店にお
問い合わせください。
トラブルシューティング仕様
一般情報
一般情報
モデル名 SyncMaster 460UTn‐2 / 460UTn2‐UD2 / 460UT‐2 /
460UTn‐B / 460UT‐B
LCD パネル
サイズ 46 インチ (116 cm)
表示範囲 1018.353 mm (H) x 572.544 mm (V)
ピクセル ピッチ 0.7455 mm (H) x 0.7455 mm (V)
同期
水平 30 ~ 81 kHz
垂直 56 ~ 85 Hz
表示色
16.7M
解像度
最適解像度 1366 x 768 @ 60 Hz
最大解像度 1920 x 1080 @ 60 Hz
最大ピクセル クロック
148.5 MHz (アナログ、デジタル)
電源
この製品は 100~ 240 V の電源に対応しています。
標準電圧は国によって異なる場合があるため、製品背面のラベルを確認してくだ
さい。
信号ケーブル
D-sub(Component), DVI-D In/Out, VCR, HDMI 1/2, RS232C In/Out, DP
DC Out, Stereo Audio In/Out, Audio In(L/R), RJ45, IR In/Out, Mini USB
• USB、LAN、D‐sub 出力 (460UTn-2, 460UTn-B のみ)
寸法 (W x H x D) / 重量
460UTn‐2
460UTn2‐UD2
1025.7 mm x 579.8 mm x 130.0 mm / 27.8 Kg
460UT‐2 1025.7 mm x 579.8 mm x 130.0 mm / 26. Kg
460UTn2‐UD2 ,
3寸法 (W x H x D) / 重量
460UTn‐B 1025.7 mm x 579.8 mm x 130.0 mm / 20.8 Kg
460UT‐B 1025.7 mm x 579.8 mm x 130.0 mm / 19. Kg
VESA 取り付けインターフェイス
600 mm × 400 mm
環境条件
動作時 460UTn
‐2
460UTn
‐B
温度:10˚~40˚C (50˚~104˚F)
湿度:10~80 %、結露しないこと
460UTn 温度:0˚~40˚C (32˚~104˚F)
‐2
湿度:10~80 %、結露しないこと
460UTn2
‐UD2
460UTn
‐B
記録装置 460UTn 温度:‐20˚~45˚C (‐4˚~113˚F)
(梱包保存 ‐2
時) 湿度:5~95 %、結露しないこと
460UTn
‐B
460UT‐
2
460UT‐
B
プラグ アンド プレイ機能
この LCD ディスプレイは、プラグ & プレイ互換システムにインストールするこ
とができます。LCD ディスプレイとコンピュータ システムとのインタラクショ
ンによって、最適な操作環境と LCD ディスプレイの設定が行われます。ほとん
どの場合、ユーザーが設定の変更を必要としない限り、LCD ディスプレイのイン
ストールは自動的に行うことができます。
ドット欠けについて
この製品には、1 ppm (百万分の 1) 精度の高度な半導体技術を利用した TFT-LCD
パネルが使用されています。ただし、赤、緑、青および白の各色のピクセルが光
って、もしくは黒く見える場合があります。これは製品の不具合ではなく、使用
上問題になるものではありません。
たとえば、この製品に含まれる TFT-LCD サブ ピクセルの数は 3,147,264 です。
注意
• 設計および仕様は事前の通知なしに変更されることがあります。
• Samsung ID (ビデオウォール キット) の取り付け時は、LFD の重量が 1.6 kg 増加し
ます。
仕様
460UTn2
‐UD2
3 : 460UTn‐2, 460UTn2‐UD2, 460UTn‐B
: 460UT‐2, 460UT‐B
PowerSaver
この LCD ディスプレイには、PowerSaver と呼ばれる消費電力管理システムが内蔵されて
います。このシステムは、LCD ディスプレイが一定時間使用されなかった場合に低消費電
力モードに切り替え、エネルギー消費を節約します。LCD ディスプレイは、キーボードの
キーが押されると自動的に通常の動作状態に戻ります。消費電力を押さえるために、必要
ない場合または長時間 LCD ディスプレイから離れる場合にはモニターをオフにします。
PowerSaver システムは、コンピュータにインストールされた VESA DPM 互換のビデオ カ
ードで動作します。お使いのコンピュータにインストールされているソフトウェア ユーテ
ィリティを使用して、この機能を設定してください。
PowerSaver
モード 通常動作 省電力モー
ド
電源オフ 電源オフ
(電源スイッ
チ)
電源インジケーター オン 点滅 黄色 オフ
消費電力
(一般)
460UTn‐2
460UTn2‐
UD2
300 ワット 5 ワット 5 ワット 0 ワット
460UT‐2 230 ワット 2 ワット 1 ワット 0 ワット
460UTn‐B 260 ワット 5 ワット 5 ワット 0 ワット
460UT‐B 195 ワット 2 ワット 1 ワット 0 ワット
注意
• システムの状態または設定が変更された場合は、実際の消費電力が上記の消費電力と異
なる場合があります。
• 電力消費を止めるには、スイッチをオフにするか、背面の電源ケーブルを抜きます。長
時間外出する場合は、電源ケーブルを抜いてください。
• ネットワーク ボックス (別売り) を接続した場合、LFD は Energy Star 5.0 準拠では
なくなります。
プリセット タイミング モード
コンピュータから送られてきた信号が以下のプリセット タイミング モードと同じ場合に
は、画面は自動的に調整されます。しかし、信号が異なる場合には、電源 LED が点灯して
いても画面に何も映らなくなる場合があります。ビデオ カードのマニュアルを参照して、
以下のように画面を調整してください。
仕様表示モード 水平周波数
(kHz)
垂直周波数
(Hz)
ピクセル ク
ロック (MHz)
同期極性 (H/
V)
IBM、640 x 350 31.469 70.086 25.175 +/‐
IBM、640 x 480 31.469 59.940 25.175 ‐/‐
IBM、720 x 400 31.469 70.087 28.322 ‐/+
MAC、640 x 480 35.000 66.667 30.240 ‐/‐
MAC、832 x 624 49.726 74.551 57.284 ‐/‐
MAC、1152 x 870 68.681 75.062 100.000 ‐/‐
VESA、640 x 480 37.861 72.809 31.500 ‐/‐
VESA、640 x 480 37.500 75.000 31.500 ‐/‐
VESA、800 x 600 35.156 56.250 36.000 +/+
VESA、800 x 600 37.879 60.317 40.000 +/+
VESA、800 x 600 48.077 72.188 50.000 +/+
VESA、800 x 600 46.875 75.000 49.500 +/+
VESA、848 x 480 31.020 60.000 33.750 +/+
VESA、1024 x 768 48.363 60.004 65.000 ‐/‐
VESA、1024 x 768 56.476 70.069 75.000 ‐/‐
VESA、1024 x 768 60.023 75.029 78.750 +/+
VESA、1152 x 864 67.500 75.000 108.000 +/+
VESA、1280 x 768 47.776 59.870 79.500 ‐/+
VESA、1280 x 960 60.000 60.000 108.000 +/+
VESA、1280 x 1024 63.981 60.020 108.000 +/+
VESA、1280 x 1024 79.976 75.025 135.000 +/+
VESA、1360 x 768 47.712 60.015 85.500 +/+
VESA、1366 x 768 47.712 59.790 85.500 +/+
VESA,1600 x 1200 75.000 60.000 162.000 +/+
VESA,1920 x 1080 67.500 60.000 148.500 +/+
水平周波数
画面の右端から左端を水平につなぐ 1 本の直線を
スキャンするのにかかる時間を水平サイクルと言
い、水平サイクルの逆数を水平周波数と言います。
単位: kHz
垂直周波数
蛍光灯と同じように、画面は同じ画像を 1 秒間に
何回も繰り返し表示して、ユーザーに対して映像を
表示しています。この繰り返しの周波数を、垂直周
波数またはリフレッシュ レートと言います。単位:
Hz
仕様情報
より良い画質でご覧いただくために
コンピュータの解像度と画面の描画頻度(リフレッシュ レート)を以下の説
明に従ってコンピュータ上で調整し、最適な表示をお楽しみください。TFT-LCD
に最適な画質でない場合には、画面の画質が不均一になる場合があります。
• 解像度:1366 x 768
• 垂直周波数 (リフレッシュ レート): 60 Hz
この製品には、1 ppm (百万分の 1) 以上の高精度な半導体技術を利用した
TFT-LCD パネルが使用されています。ただし、赤、緑、青および白の各色のピク
セルが光って、もしくは黒く見える場合があります。これは製品の不具合ではな
く、使用上問題になるものではありません。
• たとえば、この製品に含まれる TFT-LCD サブ ピクセルの数は 3,147,264 で
す。
モニターとパネルの外側を清掃するときには、柔らかい布に少量の水を付け
て拭き取ってください。LCD 部分を清掃するときには、力を入れずに拭き取って
ください。過剰な力がかかると、キズがつく場合があります。
画質に不満がある場合には、Auto ボタンを押したときに表示される表示画面
の「自動調整 機能」を行って画質を改善できる場合があります。自動調整後も
ノイズが発生する場合には、微調整/粗調整 調整機能を使用します。
静止画面を長時間表示し続けると、画像が残ったり画面がぼやけたりする場
合があります。長時間モニターの前から離れるときには、省電力モードにする
か、動画のスクリーンセーバーを設定してください。
製品情報(残像について)
残像とは?
LCD パネルは、通常の使用 (下記参照) において、残像は発生しません。
通常の条件とは、連続的に変化するビデオパターンとして定義されます。LCD パ
ネルが固定されたパターンの状態で、長時間(12時間以上)使用されると、ピク
セル内の液晶を動作させる電極の間で若干の電圧の差が生じる場合があります。
電極間の電圧の差が時間とともに増大すると、液晶が曲げられてしまいます。こ
のような現象が発生すると、パターンが変化したときに以前のイメージが見える
場合があります。これを防止するために、蓄積した電圧差を解消する必要があり
ます。電源オフ、スクリーンセイバー、または省電力モード
• 12 時間使用: 電源を 2 時間オフ
• PC の表示プロパティの電源管理機能で、モニターの電源をオフにするよう設
定します。
• 可能な場合にはスクリーンセイバーを使用します ‐ スクリーンセイバー
は、単色または動く映像のものをお勧めします。
• 残像防止機能を使用することをお勧めします。
定期的に色の組み合わせを変更する
注意
2 つの異なる色の使用
情報2 つの色情報を 30 分ごとに切り替えます。
• 明るさが極端に異なる文字色と背景色の組み合わせは避けてください。
また、残像が発生する原因となりますのでグレーは使用しないでください。
避けること:明るさが大きく異なる色 (白と黒、灰色) の使用。
定期的に文字色を変更する
• 明るさの差が少ない明るい色を使用します。
‐ 周期:文字色と背景色を 30 分間隔で変更
• 30 分ごとに、文字を動かして変更します。
• 画像やロゴを定期的に表示します。
‐ 周期:ロゴとともに移動するイメージを 4 時間使用するごとに 60 秒表示
します。
• 残像を抑えるのにもっとも効果的な方法は PC を使用していないときにスクリ
ーンセイバーが 起動するように設定することです。これらのガイドラインに
従わない場合には、保証内容に影響を与える場合があります。
製品に画面ピクセル機能を使用する
• 画面ピクセル機能を使用する
‐ 症状:黒色の点が上下に移動します。
• 画面バー機能を使用する
‐ 症状:黒色の水平/垂直線が上下に移動します。
情報製品に画面消去機能を使用する
• 画面消去機能を使用する
‐ 症状:2 つの垂直なブロックが表示を消していきます。
情報付録
お客様相談ダイヤル
東雲サービスセンター
受付時間 平日(土日祭日を除く)9:00~17:00 ※
ホームページ http://www.samsung.com/jp
住所 〒135‐0062 東京都江東区東雲2‐6‐38
Fax 03‐3527‐5533
注意
※ 予告なく変更する場合がございます。あらかじめご了承ください。
用語
ドット ピッチ モニターの画像は、赤色、緑色および青色のドットで構成
されています。ドットの間隔が小さいほど、解像度は高く
なります。同じ色の 2 個のドット間の距離を「ドット ピ
ッチ」と言います。単位:mm
垂直周波数 ユーザーに対して画像を作成して表示するには、1 秒間当
たり何回も画像を再描画しなければなりません。1 秒当た
りのこの繰り返しの回数を、垂直周波数またはリフレッシ
ュ レートと言います。単位: Hz
例:同じ光が 1 秒間に 60 回繰り返すときには、60 Hz と
なります。
水平周波数 画面の右端から左端を水平につなぐ直線をスキャンするの
にかかる時間を、水平サイクルと言います。水平サイクル
の逆数を水平周波数と呼びます。単位:kHz
インタレース法とノンインタ
レース法
画面の水平線を上から下に順番に表示していく方法をノン
インタレース法と言い、奇数番目のラインを表示してから
偶数番目のラインを表示する方法をインタレース法と言い
ます。ノンインタレース法は、明確な画像にするために多
くのモニターで使用されています。インタレース法は、TV
で使用されているものと同じです。
プラグ & プレイ コンピュータとモニターが自動的に情報を交換することに
より、ユーザーに最高の画質を提供する機能です。このモ
ニターは、プラグ & プレイ機能について国際規格 VESA
DDC に対応しています。
解像度 画面の画像を構成するのに使用される水平および垂直方向
のドットの数を、「解像度」と呼びます。この数は、表示
の正確さを示しています。高い解像度では、多くの画像情
報を画面上に表示できるため、複数の作業を実行する場合
に適しています。
例:解像度が 1920 X 1080 の場合、水平方向のドットが
1920 個 (水平解像度)、垂直線 1080 本 (垂直解像度) で
構成されていることを意味します。制限事項
本書の内容は、将来予告なく変更されることがあります。
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
Samsung Electronics Co., Ltd.の文書による許可なしには、いかなる複製も堅く禁じま
す。
内容に含まれる誤り、または設置や使用の結果として起こる損害について、Samsung Electronics Co., Ltd.は一切の責任を負いません。
Samsung は Samsung Electronics Co., Ltd.の登録商標です。Microsoft、Windows および
Windows NT は、Microsoft Corporation の登録商標です。VESA、DPM および DDC は Video
Electronics Standard Association の登録商標です。本書に記載されているその他すべて
の製品名は、各企業・団体の商標または登録商標です。
本製品は日本国内用として製造、販売しています。日本国外で使用された場合、当社は責
任を負い兼ねます。また、技術相談や、アフターサービスなども国外では行っておりませ
んのでご注意ください。
本製品は一般 OA 用として設計・製造されています。一般 OA 用以外の用途で使用される場
合は、保証期間内であっても無償修理の対象外となることがありますのでご注意ください。
TruSurround XT, SRS and the symbol are trademarks of SRS
Labs, Inc.
TruSurround XT technology is incorporated under license from
SRS Labs, Inc.
付録
LCD DISPLAY
quick start guide
460UTn-2, 460UT-2, 460UTn-B, 460UT-BIntroduction
Package Contents
Checking the Contents of the Package
Remove the lock from the package box, as shown in the figure above.
Lift up the package box by
holding the grooves on
both sides of the package
box.
Check the contents of the
package.
Remove the Styrofoam
and vinyl cover.
Note
• After unpacking the package, make sure to check the contents of the package.
• Store the packaging box in case you need to move the Product later.
• If any items are missing, contact your dealer.
• Contact a local dealer to purchase optional items.
• After unpacking, you may use the lower part of the package box as a temporary stand for
product test or operation check.
Unpacking
LCD DisplayManuals
Quick Setup Guide Warranty Card
(Not available in all locations)
User's Guide
Cables
Power Cord D-Sub Cable MagicInfo Software CD,
MagicInfo Manual CD
(Applicable to the
460UTn-2, 460UTn-B
model only)
Others
Remote Control
(BP59-00138B)
Batteries (AAA X 2)
(Not available in all locations)
Sold separately
Semi Stand KIT LAN Cable USB Cable
(Applicable to the
460UTn-2, 460UTn-B
model only)
IntroductionSold separately
RGB to BNC Cable RGB to COMPONENT Cable
Network Box
(Applicable to the
460UT-2, 460UT-B model
only)
Wall Mount KIT TV Tuner Box
Your LCD Display
Front
SOURCE button
Switches from PC mode to Video mode. Selects the input source that an
external device is connected to.
[PC] → [DVI] → [AV] → [Component] → [HDMI1] → [HDMI2] → [DisplayPort] → [MagicInfo] → [TV]
Note
• A TV tuner box (sold separately) must be connected to use the TV.
• A network box (sold separately) must be connected to use MagicInfo
with a 460UT-2, 460UT-B model.
POWER button
Use this button for turning the LCD Display on and off.
Power indicator
Shows PowerSaver mode by blinking green
Introduction Note
See PowerSaver described in the manual for further information regarding
power saving functions. For energy conservation, turn your LCD Display
OFF when it is not needed or when leaving it unattended for long periods.
Remote Control Sensor
Aim the remote control towards this spot on the LCD Display.
Rear
Note
See the "Connections" section for details about cable connections. The LCD Display's configuration at the back may vary slightly depending on the model.
POWER S/W ON [ │ ] / OFF
Switches the LCD Display On/Off.
POWER
The power cord plugs into the LCD Display
and the wall outlet.
IR OUT/IN
Receives a signal from the remote control
and outputs the signal through Loopout when
a removable sensor board is connected.
AMBIENT SENSOR IN
Supplies power to the removable sensor
board and receives a signal from the light
sensor.
DVI OUT (LOOPOUT)
• Connect a monitor to another monitor
through a DVI, DVI to HDMI cable.
Introduction• Connect a DVI or DVI-HDMI cable to [DVI
OUT (LOOPOUT)] on the product and
[DVI IN] or [HDMI IN] on another monitor.
• HDMI and network signals sent via the
[DVI OUT(LOOPOUT)] port are displayed on the second display which has
the [DVI IN] port.
Note
• The Loopout function can be used to duplicate the screen of the primary display.
Connect [DVI OUT] on the primary display to [DVI IN] or [HDMI] on another
display.
• A maximum of 50 monitors can be connected to DVI-Loopout (using a 2m-long
DVI cable). Up to Full HD resolution can
be supported. Compatible input sources
include DVI IN, HDMI IN 1, and HDMI IN
2 (MagicInfo).
RGB/COMPONENT IN (PC/COMPONENT Connection Terminal (Input))
• Connect the [RGB/COMPONENT IN]
port on the monitor to the RGB port on the
PC using the D-SUB cable.
• Connect the [RGB/COMPONENT IN]
port on the monitor to the COMPONENT
port on the external device using the RGB
to COMPONENT cable.
• Connect the [RGB/COMPONENT IN]
port on the monitor to the BNC port on the
PC using the RGB to BNC cable.
DVI IN (PC Video Connection Terminal)
Connect the [DVI IN] port on the monitor to
the DVI port on the PC using the DVI cable.
RGB/DVI/DP/HDMI AUDIO IN (PC/DVI/
DP/HDMI Audio Connection Terminal (Input))
Connect the [RGB/DVI/DP/HDMI AUDIO
IN] terminal of the monitor and the speaker
output terminal of your computer's sound
card using a stereo cable (sold separately).
DP IN
Receives a signal from the Display port.
IntroductionConnect a DP cable to [DP IN] on the product
and DP IN on another display.
AV/COMPONENT AUDIO IN [L-AUDIOR]
Connect the [AV/COMPONENT AUDIO IN
[L-AUDIO-R]] port on the monitor to the audio
output port on the PC or on the external device using an audio cable.
AV IN
Connect the [AV IN] terminal of your monitor
to the video output terminal of the external
device using a VIDEO cable.
AUDIO OUT
Connect a headphone or an External speaker.
DC OUT
Make sure to use connecting [DC OUT] terminal to the authorized TV-Tuner Box
[SBB_DTC/ZA].
Otherwise, this may result in damage
to the product.
HDMI IN 1
• Connect the [HDMI IN 1] terminal at the
back of your LCD Display to the HDMI
terminal of your digital output device using a HDMI cable.
• Up to HDMI 1.3 can be supported.
Note
The [HDMI IN 1] port can be connected to
general external devices (DVD players, camcorders, etc.) or the TV set-top box.
HDMI IN 2 (MAGICINFO)
• Connect the [HDMI IN 2 (MAGICINFO)]
terminal at the back of your LCD Display
to the HDMI terminal of your digital output
device using a HDMI cable.
• Up to HDMI 1.3 can be supported.
Introduction Note
The MAGICINFO OUT port must be connected to the [HDMI IN 2 (MAGICINFO)] port.
RJ 45 MDC (MDC PORT)
MDC(Multiple Display Control) Program Port
Connect the LAN cable to [RJ45 MDC] on the
product and LAN on the PC. To use an MDC,
the MDC program must be installed on the
PC.
Note
Go to Multi Control and select RJ45 MDC as
the MDC Connection.
RS232C OUT/IN (RS232C Serial PORT)
MDC(Multiple Display Control) Program Port
Connect a serial cable (cross type) to
[RS232C] on the product and RS232C on the
PC. To use an MDC, the MDC program must
be installed on the PC.
Note
Go to Multi Control and select RS232C
MDC as the MDC Connection.
RGB OUT
MagicInfo video output port
Note
Applicable to the 460UTn-2, 460UTn-B model only.
MAGICINFO OUT
Outputs MagicInfo HDMI signals. It should
be connected to [HDMI IN 2 (MAGICINFO)]
via an HDMI cable.
LAN (LAN Connection Terminal)
Connects to a LAN cable to allow Internet or
network access in MagicInfo mode.
Note
Applicable to the 460UTn-2, 460UTn-B model only.
IntroductionUSB (USB Connection Terminal)
Keyboard / Mouse, Mass Storage Device
Compatible.
Note
Applicable to the 460UTn-2, 460UTn-B model only.
Kensington Lock slot
A Kensington Lock is an anti-theft device that
enables users to lock the product so that they
can safely use it in public locations. Since the
shape and usage of the locking device may
differ depending on the model and the manufacturer, for more information, refer to the
User Manual supplied with the locking device
for more information.
Note
You must purchase the Kensington Lock
separately.
To lock the product, follow these
steps:
1. Wrap the Kensington lock cable around
a large, stationary object such as a desk
or chair.
2. Slide the end of the cable with the lock
attached through the looped end of the
Kensington lock cable.
3. Insert the Kensington Lock into the security slot ( ) on the back of the display.
4.
Lock the lock ( ).
Note
• These are general instructions. For exact
instructions, see the User Manual supplied with the locking device.
• You can purchase the locking device
from an electronics store, an online shop,
or our service center.
Note
See the "Connections" section for details about cable connections.
IntroductionRemote Control
Note
The performance of the remote control may be affected by a TV or other electronic device
operating near the LCD Display , causing a malfunction due to interference with the frequency.
POWER
OFF
Number Buttons
DEL / GUIDE button
+ VOL -
SOURCE
D.MENU
TOOLS
Up-Down Left-Right buttons
INFO
PC/DVI/HDMI/DP
TTX/MIX
MTS/DUAL
ENTER/PRE-CH
MUTE
CH/P
TV
MENU
RETURN
EXIT
MagicInfo
POWER
Turns the product On/Off.
OFF
Turns the product Off.
Number Buttons
Used to enter the password during the OSD adjustment or
to use MagicInfo.
Press to change the channel.
DEL / GUIDE button
The "-" button is used to select Digital channels.
Electronic Program Guide (EPG) display.
- This function does not work for this LCD Display.
+ VOL -
Adjusts the audio volume.
Introduction SOURCE
Selects a connected external input source or MagicInfo
mode.
Press the button to change the input signal SOURCE.
Changing the SOURCE is only allowed for external devices
that are connected to the LCD Display at the time.
D.MENU
DTV menu display
- This function does not work for this LCD Display.
TOOLS
Use to quickly select frequently used functions.
- This function does not work for this LCD Display.
Up-Down Left-Right buttons
Moves from one menu item to another horizontally, vertically
or adjusts selected menu values.
INFO
Current picture information is displayed on the upper left
corner of the screen.
PC/DVI/HDMI/DP
Directly selects an external input source: PC, DVI, HDMI or
DP(DisplayPort).
TTX/MIX
TV channels provide written information services via teletext.
- Teletext Buttons
- This is activated when a TV tuner box is installed.
MTS/DUAL
MTSYou can select MTS (Multichannel Television Stereo) mode.
Audio Type MTS/S_Mode Default
FM Stereo Mono Mono Manual
Change
Stereo Mono ↔ Stereo
SAP Mono ↔ SAP Mono
DUALSTEREO/MONO, DUAL l / DUAL ll and MONO/NICAM
MONO/NICAM STEREO can be operated depending on the
broadcasting type by using the DUAL button on the remote
control while watching TV.
- This is activated when a TV tuner box is installed.
ENTER/PRE-CH
This button is used to return to the immediately previous
channel.
- This is activated when a TV tuner box is installed.
MUTE
Pauses (mutes) the audio output temporarily. This is displayed on the lower left corner of the screen. The audio
Introductioncomes back on if MUTE or - VOL + is pressed in the Mute
mode.
CH/P
In TV mode, selects TV channels.
- This is activated when a TV tuner box is installed.
TV
Selects the TV mode directly.
- This is activated when a TV tuner box is installed.
MENU
Opens the on-screen menu and exits from the menu or
closes the adjustment menu.
RETURN
Returns to the previous menu.
EXIT
Exits from the menu screen.
MagicInfo
MagicInfo Quick Launch Button.
Note
This button is disabled for products that do not support
MagicInfo.
IntroductionConnections
Connecting a Computer
There are several ways to connect the computer to the monitor. Choose
one from the following options.
Using the D-sub (Analog) connector on the video card.
• Connect the D-sub to the 15-pin, [RGB/COMPONENT IN] port on the
back of your LCD Display and the 15 pin D-sub Port on the computer.
Using the DVI (Digital) connector on the video card.
• Connect the DVI Cable to the [DVI IN] port on the back of your LCD
Display and the DVI port on the computer.
Using the (Digital) connector on the video card.
• Connect the [HDMI IN 1] port on the LCD Display to the HDMI port on
the PC using the HDMI cable.
HDMI Note
Select HDMI2 (only with a 460UT-2, 460UT-B model) or HDMI1 as an input
source when connected to the PC via an HDMI cable.
To obtain normal picture and audio from the PC, HDMI2 (only with a
460UT-2, 460UT-B model) or HDMI1 must be selected before PC is selected in Edit Name.
To enable audio when DVI Device is selected, be sure to establish the
connection using step ( ).
Connect the Audio cable for your LCD Display to the AUDIO port on the
back of the LCD Display.
Connect the power cord for your LCD Display to the POWER port on the
back of the LCD Display. Turn on the power switch.
Note
Contact a local SAMSUNG Electronics Service Center to buy optional items.
Connecting to Other devices
Note
• AV input devices such as DVD players, VCRs or camcorders as well as your computer
can be connected to the LCD Display. For detailed information on connecting AV input
devices, refer to the contents under Adjusting Your LCD Display.
• The LCD Display 's configuration at the back may vary slightly depending on the LCD
Display model.
Connecting an External Monitor
ConnectionsConnect between the [DVI OUT(LOOPOUT)] port on the LCD Display and
the input port on another monitor using a DVI cable.
Connect between the [AUDIO OUT] port on the LCD Display and the audio
input port on another monitor using a stereo cable.
Note
Select DVI Mode as an input source for the external monitor connected to [DVI OUT].
DVI OUT does not support HDCP.
Connecting AV Devices
1. Connect an audio cable to [AV/COMPONENT AUDIO IN [L-AUDIO-R]] on
the product and the audio port on an external device such as a VCR or
DVD player.
2. Connect a video cable to [AV IN] on the product and the video output port
on the external device.
3. Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted.
4. Press SOURCE on the product or remote control and select "AV".
Note
AV input devices such as DVD players, VCRs or camcorders as well as your computer can
be connected to the LCD Display. For detailed information on connecting AV input devices,
refer to the contents under Adjusting Your LCD Display.
ConnectionsConnecting to a Camcorder
1. Locate the AV output jacks on the camcorder. They are usually found on
the side or back of the camcorder. Connect a video cable between the
VIDEO OUTPUT jack on the camcorder and the [AV IN] on the LCD Display .
2. Connect a set of audio cables between the AUDIO OUTPUT jacks on the
camcorder and the [AV /COMPONENT AUDIO IN [L-AUDIO-R]] on the
LCD Display .
3. Press SOURCE on the product or remote control and select "AV".
4. Then, start the Camcorders with a tape inserted.
Note
The audio-video cables shown here are usually included with a Camcorder.
(If not, check your local electronics store.)
If your camcorder is stereo, you need to connect a set of two cables.
ConnectionsConnecting Using a HDMI Cable
1. Connect an HDMI cable to [HDMI IN 2 (MAGICINFO)] (only with a
460UT-2, 460UT-B model) or [HDMI IN 1] on the product and the HDMI
output port on a digital device.
2. Press SOURCE on the product or remote control and select "HDMI1 /
HDMI2(only with a 460UT-2, 460UT-B model)"
Note
In HDMI mode, only PCM format audio is supported.
Connecting Using a DVI to HDMI Cable
Connect a DVI-HDMI cable to [HDMI IN 2 (MAGICINFO)] (only with a
460UT-2, 460UT-B model) or [HDMI IN 1] and the DVI output port on the
digital device.
Connect the red and white jacks of an RCA to stereo (for PC) cable to the
same colored audio output terminals of the digital output device, and conConnectionsnect the opposite jack to the [RGB/DVI/DP/HDMI AUDIO IN] terminal of
the LCD Display.
3. Press SOURCE on the product or remote control and select "HDMI1 /
HDMI2(only with a 460UT-2, 460UT-B model)"
Connecting a DVD Player
Connect a RGB to Component cable between the [RGB/COMPONENT
IN] port on the LCD Display and the PR, Y, PB jacks on the DVD player.
Connect a set of audio cables between the [AV/COMPONENT AUDIO IN
[L-AUDIO-R]] on the LCD Display and the AUDIO OUT jacks on the DVD
player.
Note
• Press SOURCE on the product or remote control and select "Component".
• Then, start the DVD Player with a DVD disc inserted.
• A RGB to component cable is optional.
• For an explanation of Component video, consult your DVD manual.
ConnectionsConnecting a DTV Set Top (Cable/Satellite) Box
Connect a RGB to Component cable between the [RGB/COMPONENT
IN] port on the LCD Display and the PR, Y, PB jacks on the Set Top Box.
Connect a set of audio cables between the [AV/COMPONENT AUDIO IN
[L-AUDIO-R]] on the LCD Display and the AUDIO OUT jacks on the Set
Top Box.
Note
• Press SOURCE on the product or remote control and select "Component".
• For an explanation of Component video, see your Set Top Box owner's manual.
Connecting to an Audio System
1. Connect a set of audio cables between the AUX L, R jacks on the AUDIO
SYSTEM and [AUDIO OUT] on LCD Display.
ConnectionsConnecting a LAN Cable
1. Connect the LAN cable between the [LAN] port on the product and the
[LAN] port on your PC.
Note
Applicable to the 460UTn-2, 460UTn-B model only.
Connecting a USB devices
1. You can connect USB devices such as a mouse or keyboard.
Note
Applicable to the 460UTn-2, 460UTn-B model only.
ConnectionsTroubleshooting
Self-Test Feature Check
Note
Check the following items yourself before calling for assistance. Contact a Service Center for
problems that you cannot solve by yourself.
Self-Test Feature Check
1. Turn off both your computer and the LCD Display.
2. Unplug the video cable from the back of the computer.
3. Turn on the LCD Display.
The figure shown below ("No Signal") appears on a black background when the LCD
Display is working normally even though no video signal is detected: While in the SelfTest mode, the LED power indicator remains green and the figure moves around on the
screen.
4. Turn off your LCD Display and reconnect the video cable; then turn on both your computer and the LCD Display
If your LCD Display screen remains blank after using the previous procedure, check your
video controller and computer system; your LCD Display is functioning properly.
Warning Messages
You can even view the screen at a resolution of 1920 x 1080. However, you will receive the
following message for a minute; You can choose to change the screen resolution or stay in
the current mode during that time. If the resolution is more than 85Hz, you will see the black
screen because the LCD Display does not support over 85Hz.
Note
Refer to Specifications > Preset Timing Modes for the resolutions or frequencies supported
by the LCD Display.
Maintenance and Cleaning
1) Maintaining the LCD Display Case.
Clean with a soft cloth after disconnecting the power cord.• Do not use benzene, thinner or other flammable substances.
2) Maintaining the Flat Panel Display Screen.
Clean with a soft cloth (cotton flannel).
• Never use acetone, benzene or thinner.
(They may cause flaws or deformation of the screen
surface.)
• The user is responsible for any damage caused by
using these substances.
Symptoms and Recommended Actions
Note
A LCD Display recreates visual signals received from the computer. Therefore, if there is a
problem with the computer or the video card, this can cause the LCD Display to become
blank, have poor coloring, become noisy, etc. In this case, first check the source of the problem, and then contact a Service Center or your dealer.
1. Check if the power cord and the video cables are properly connected to the computer.
2. Check if the computer beeps more than 3 times when booting.
(If it does, request service.)
3. If you installed a new video card or if you assembled the PC, check if you installed the
Adaptor(video).
4. Check if the scanning ratio of the video screen is set to between 50 Hz ~ 85 Hz.
(Do not exceed 60Hz when using the maximum resolution.)
5. If you have problems in installing the Adaptor (video) driver, boot the computer in Safe
Mode, remove the Display Adaptor in the "Control Panel −> System −> Device Administrator" and then reboot the computer to reinstall the Adaptor (video) driver.
Check List
Note
• The following table lists possible problems and their solutions. Before calling for assistance, check the information in this section to see if you can remedy any problems for
yourself. If you do need assistance, please call the phone number on the Information
section or contact your dealer.
• For more network-related information, refer to the MagicInfo Troubleshooting section.
Problems related to the Installation (PC Mode)
Note
Problems related to the LCD Display installation and their solutions are listed.
Q: The LCD Display screen flickers.
TroubleshootingA: Check if the signal cable between the computer and the LCD Display is securely connected.
(Refer to Connecting a Computer)
Problems related to the Screen
Note
Problems related to the LCD Display screen and their solutions are listed.
Q: The screen is blank and the power indicator is off.
A: Ensure that the power cord is firmly connected and the LCD Display is on.
(Refer to the Connecting a Computer)
Q: "Check Signal Cable" message.
A: Ensure that the signal cable is firmly connected to the PC or video sources.
(Refer to the Connecting a Computer)
A: Ensure that the PC or video sources are turned on.
Q: "Not Optimum Mode" message.
A: Check the maximum resolution and the frequency of the video Adaptor.
A: Compare these values with the data in the Preset Timing Modes Chart.
Q: The picture rolls vertically.
A: Check if the signal cable is securely connected. Re-connect it, if necessary.
(Refer to Connecting a Computer)
Q: The image is not clear; picture is blurred.
A: Run Frequency Coarse and Fine tuning.
A: Turn on again after removing all accessories (video extension cable, etc.)
A: Set the resolution and frequency to the recommended ranges.
Q: The picture image is unstable and shakes.
A: Check if the resolution and frequency set for the computer video card falls in the range
supported by the LCD Display. If not, reset them referring to the current Information
under the LCD Display menu and Preset Timing Modes.
Q: Ghost images are shown in the picture.
A: Check if the resolution and frequency set for the computer video card falls in the range
supported by the LCD Display. If not, reset them referring to the current Information
under the LCD Display menu and Preset Timing Modes.
Q: The image is too light or too dark.
A: Adjust the brightness and contrast.
(Refer to the Brightness, Contrast)
TroubleshootingQ: The screen color is inconsistent.
A: Adjust color using Custom under OSD Color Adjustment menu.
Q: The color image is distorted by dark shadows.
A: Adjust color using Custom under OSD Color Adjustment menu.
Q: The color white is poor.
A: Adjust color using Custom under OSD Color Adjustment menu.
Q: The Power Indicator blinks.
A: The LCD Display is currently saving the changes made in the settings to the OSD
memory.
Q: The screen is blank and the power indicator light blinks every 0.5 or 1 seconds.
A: The LCD Display is using its power management system. Press any key on the keyboard.
Q: The screen is blank and it is blinking.
A: If you see the "TEST GOOD" message on the screen when you pressing the MENU
button, check the cable connection between the LCD Display and the computer to ensure that the connector is properly connected.
Problems related to Audio
Note
Problems related to audio signals and their solutions are listed below.
Q: No sound.
A: Ensure that the audio cable is firmly connected to both the audio-in port on your LCD
Display and the audio-out port on your sound card.
(Refer to the Connecting a Computer)
A: Check the volume level.
Q: The sound level is too low.
A: Check the volume level.
A: If the volume is still too low after turning the control to its maximum, check the volume
control on the computer sound card or software program.
Q: The sound is too high or too low.
A: Adjusts the Treble and Bass to the appropriate levels.
Problems related to the Remote Control
Note
Problems related to the remote control and their solutions are listed.
Q: The remote control buttons do not respond.
A: Check the polarities (+/-) of the batteries.
TroubleshootingA: Check if the batteries are empty.
A: Check if the power is on.
A: Check if the power cord is securely connected.
A: Check if a special fluorescent or neon lamp is on in the vicinity.
Q & A
Q: How can I change the frequency?
A: The frequency can be changed by reconfiguring the video card.
Note
That video card support can vary, depending on the version of the driver used. (Refer
to the computer or the video card manual for details.)
Q: How can I adjust the resolution?
A: Windows XP:
Set the resolution in the Control Panel → Appearance and Themes → Display → Settings.
A: Windows ME/2000:
Set the resolution in the Control Panel → Display → Settings.
* Contact the video card manufacturer for details.
Q: How can I set the Power Saving function?
A: Windows XP:
Set the resolution in the Control Panel → Appearance and Themes → Display → Screen
Saver.
Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer
Manual).
A: Windows ME/2000:
Set the resolution at the Control Panel → Display → Screen Saver.
Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer
Manual).
Q: How can I clean the outer case/LCD Panel?
A: Disconnect the power cord and then clean the LCD Display with a soft cloth, using either
a cleaning solution or plain water.
Do not leave any detergent or scratches on the case. Do not let any water enter the
LCD Display.
Q: How can I play the video?
A: The video supports the MPEG1 and WMV codecs only. Install the corresponding codec
to play the video. Note that some of the codecs can be incompatible.
Troubleshooting Note
Before calling for assistance, check the information in this section to see if you can remedy
any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer.
Troubleshooting
LCD DISPLAY
quick start guide
460UTn-2, 460UT-2, 460UTn-B, 460UT-Bはじめに
パッケージ内容
パッケージの内容の確認
上の図に示すように、パッケージの箱からロックを取り外します。
箱の両側にある穴に手をか
けて、箱を持ち上げます。
パッケージの内容を確認し
ます。
発布スチロールとビニール
袋を取り外します。
注意
• パッケージを開いたら、内容を確認してください。
• 製品を運ぶときに必要になりますので、梱包されていた箱は保管しておいてください。
• 不足している品目がある場合には、販売店にお問い合わせください。
• オプション品の購入については、お近くの販売店にお問い合わせください。
• 開梱したら、パッケージの箱の下部を仮のスタンドとして使用して製品のテストや動作
チェックを行うことができます。
同梱物
LCD ディスプレイマニュアル類
クイック セットアップ ガ
イド
保証書
(含まれていない地域もあ
ります)
ユーザー ガイド
ケーブル
電源コード D-Sub ケーブル MagicInfo ソフトウェア
CD, MagicInfo マニュア
ル CD
(460UTn-2, 460UTn-B モ
デルのみ)
その他
リモートコントロール
(BP59-00138B)
バッテリ (AAA X 2)
(含まれていない地域もあ
ります)
別売り
セミ スタンド キット LAN ケーブル USB ケーブル
(460UTn-2, 460UTn-B モ
デルのみ)
はじめに別売り
RGB to BNC ケーブル RGB to COMPONENT ケーブ
ル
NetWork ボックス
(460UT-2, 460UT-B モデル
のみ)
ウォール マウント キット TV チューナー ボックス
お使いの LCD ディスプレイ
前面
SOURCE ボタン
PC モードからビデオモードに切り替えます。外部デバイスが接続されて
いる入力信号を選択します。
[PC] → [DVI] → [AV] → [コンポ一ネント] → [HDMI1] → [HDMI2]
→ [ディスプレイ ポート] → [MagicInfo]
注意
• TV を使用するには、TV チューナー ボックス (別売り) を接続する
必要があります。
• 460UT-2, 460UT-B モデルで MagicInfo を使用するには、ネットワー
ク ボックス (別売り) を接続する必要があります。
POWER ボタン
このボタンで、LCD ディスプレイの電源のオン/オフを切り替えます。
電源インジケーター
緑色に点滅して PowerSaver モードであることを示します
注意
省電力機能の詳細については、このマニュアルの「PowerSaver」を参照
してください。消費電力を押さえるために、必要ない場合または長時間
LCD ディスプレイから離れる場合にはモニターをオフにします。
はじめにリモートカラーセンサー
リモコンを LCD ディスプレイのこの部分に向けます。
背面
注意
ケーブル接続の詳細については、「接続」のセクションを参照してください。LCD ディス
プレイの背面の構成は、モデルによって若干異なる場合があります。
POWER S/W ON [ │ ] / OFF
LCD ディスプレイのオン/オフを切り替えま
す。
POWER
LCD ディスプレイと壁のコンセントに電源
コードを接続します。
IR OUT/IN
リモコンからの信号を受信して、リムーバ
ブル センサー ボードが接続されたときに
はループアウトを通じて信号を送信します。
AMBIENT SENSOR IN
リムーバブル センサー ボードに電源を供
給し、光センサーからの信号を受信します。
DVI OUT (LOOPOUT)
• モニターを DVI、DVI to HDMI ケーブル
を使用して別のモニターに接続します。
• DVI または DVI-HDMI ケーブルを製品
の [DVI OUT (LOOPOUT)] と別のモニタ
ーの [DVI IN] または [HDMI IN] に接
続します。
• [DVI OUT(LOOPOUT)] ポートから送出さ
れる HDMI およびネットワーク信号は、
はじめに[DVI IN] ポートを持つセカンド ディス
プレイに表示されます。
注意
• ループアウト機能を使用して、プライマ
リ ディスプレイの画面を二重化するこ
とができます。プライマリ ディスプレ
イの [DVI OUT] を別のディスプレイの
[DVI IN] または [HDMI] に接続します。
• DVI-Loopout には (長さ 2m の DVI ケ
ーブルを使用して) 最大 50 台のモニタ
ーを接続できます。最大で Full HD ま
での解像度をサポートできます。入力信
号は、DVI IN、HDMI IN 1、および HDMI
IN 2 (MagicInfo) に対応しています。
RGB/COMPONENT IN (PC/COMPONENT 接続
端子 (入力))
• モニターの [RGB/COMPONENT IN] ポート
を PC の RGB ポートに D-SUB ケーブル
を使用して接続します。
• モニターの [RGB/COMPONENT IN] ポート
を外部デバイスの COMPONENT ポートに
RGB to COMPONENT ケーブルを使用して
接続します。
• モニターの [RGB/COMPONENT IN] ポート
を PC の BNC ポートに RGB to BNC ケ
ーブルを使用して接続します。
DVI IN (PC 映像接続端子)
モニターの [DVI IN] ポートを DVI ケーブ
ルを使用して PC の DVI ポートに接続しま
す。
RGB/DVI/DP/HDMI AUDIO IN (PC/DVI/
DP/HDMI 音声接続端子 (入力))
別売りのステレオ ケーブルを使用して、モ
ニターの [RGB/DVI/DP/HDMI AUDIO IN] 端
子とお使いのコンピュータのサウンド カー
ドのスピーカー出力端子を接続します。
DP IN
ディスプレイ ポートからの信号を受信しま
す。
DP ケーブルを製品の [DP IN] と別のディ
スプレイの DP IN に接続します。
はじめにAV/COMPONENT AUDIO IN [L-AUDIO-R]
モニターの [AV/COMPONENT AUDIO IN [LAUDIO-R]] ポートを PC または外部デバイ
スの音声出力ポートにオーディオ ケーブル
を使用して接続します。
AV IN
ビデオ ケーブルを使用して、モニターの
[AV IN] 端子を外部デバイスのビデオ出力
端子に接続します。
AUDIO OUT
ヘッドフォンまたは外部スピーカーを接続
します。
DC OUT
[DC OUT] 端子が承認済みの TV チューナ
ー ボックス Box[SBB_DTC/ZA] に接続され
ていることを確認します。
製品が損傷する場合があります。
HDMI IN 1
• HDMI ケーブルを使用して、LCD ディス
プレイ背面の HDMI 端子をお使いのデジ
タル出力デバイスの [HDMI IN 1] 端子
に接続します。
• HDMI 1.3 までをサポートしています。
注意
[HDMI IN 1] ポートは、一般の外部デバイ
ス (DVD プレイヤー、カムコーダーなど)
や TV セットトップ ボックスに接続できま
す。
HDMI IN 2 (MAGICINFO)
• HDMI ケーブルを使用して、LCD ディス
プレイ背面の HDMI 端子をお使いのデジ
タル出力デバイスの [HDMI IN 2 (MAGICINFO)] 端子に接続します。
• HDMI 1.3 までをサポートしています。
はじめに注意
MAGICINFO OUT ポートは、[HDMI IN 2 (MAGICINFO)] ポートに接続しなければなりませ
ん。
RJ 45 MDC (MDC PORT)
MDC (マルチディスプレイ コントロール)
プログラム ポート
LAN ケーブルを製品の [RJ45 MDC] と PC
の LAN に接続します。MDC を使用するに
は、PC に MDC プログラムがインストール
されている必要があります。
注意
Multi Control に移動して、MDC Connection として RJ45 MDC を選択します。
RS232C OUT/IN (RS232C シリアル ポー
ト)
MDC (マルチディスプレイ コントロール)
プログラム ポート
シリアル ケーブル (クロス タイプ) を製
品の [RS232C] と PC の RS232C に接続し
ます。MDC を使用するには、PC に MDC プ
ログラムがインストールされている必要が
あります。
注意
Multi Control に移動して、MDC Connection として RS232C MDC を選択します。
RGB OUT
MagicInfo ビデオ出力ポート
注意
460UTn-2, 460UTn-B モデルのみ。
MAGICINFO OUT
MagicInfo の HDMI 信号を出力します。HDMI
ケーブルで [HDMI IN 2 (MAGICINFO)] に接
続する必要があります。
LAN (LAN 接続端子)
はじめにLAN ケーブルに接続して、MagicInfo モー
ドでのインターネットまたはネットワーク
アクセスを可能にします。
注意
460UTn-2, 460UTn-B モデルのみ。
USB(USB 接続端子)
キーボード/マウス、マス ストレージ機器
対応。
注意
460UTn-2, 460UTn-B モデルのみ。
Kensington Lock slot
Kensington ロックは、公共の場所で製品を
安全に使用できるようにロックすることが
できる盗難防止用の装置です。固定装置の
形状と使用方法はモデルおよびメーカーに
よって異なるため、詳細については固定装
置に付属するユーザー マニュアルを参照し
てください。
注意
Kensington ロックを別途購入する必要があ
ります。
製品をロックするには以下の手順に
従います。
1. Kensington ロック ケーブルを、デス
クや椅子など大きくて動かない物体に
かけます。
2. ロックのついたケーブルの端を Kensington ロック ケーブルの端の輪に通
します。
3. ケンジントン ロックをディスプレイ背
面にあるセキュリティ スロット ( )
に挿入します。
4. ロックします ( )。
注意
• これは一般的な説明です。詳細について
は、ロック装置に付属するユーザー マ
ニュアルを参照してください。
• 固定装置の購入につきましてはお買い上
げいただいたお店にご確認ください。
はじめに注意
ケーブル接続の詳細については、「接続」のセクションを参照してください。
リモートコントロール
注意
リモコンの動作は TV またはその他 LCD ディスプレイ付近で動作している電子機器の影響
を受ける場合があり、周波数の干渉によって誤作動することがあります。
POWER
OFF
ダイヤルパッド
DEL / GUIDE ボタン
+ VOL -
SOURCE
D.MENU
TOOLS
上下左右ボタン
INFO
PC/DVI/HDMI/DP
TTX/MIX
MTS/DUAL
ENTER/PRE-CH
MUTE
CH/P
TV
MENU
RETURN
EXIT
MagicInfo
POWER 製品のオン/オフを切り替えます。
OFF 製品をオフにします。
ダイヤルパッド OSD の調整時、または MagicInfo を使用するときにパス
ワードを入力するのに使用します。
押してチャンネルを変更します。
DEL / GUIDE ボタ
ン
「-」ボタンはデジタル チャンネルの選択に使用します。
電子番組ガイド (EPG) 表示
はじめに- この機能はこの LCD ディスプレイでは動作しません。
+ VOL - 音声の音量を調整します。
SOURCE 接続されている外部入力信号または MagicInfo モードを
選択します。
ボタンを押して、入力信号 SOURCE を切り換えます。
SOURCE の変更は、変更時に LCD ディスプレイに接続され
ている外部デバイスについてのみ行うことができます
D.MENU
DTV メニュー表示
- この機能はこの LCD ディスプレイでは動作しません。
TOOLS よく使う機能を素早く選択するのに使用します。
- この機能はこの LCD ディスプレイでは動作しません。
上下左右ボタン ひとつのメニューから別のメニューに横方向、縦方向に移
動したり、選択したメニューの値を調整したりします。
INFO 画面左上に現在の画像情報が表示されます。
PC/DVI/HDMI/DP 外部入力信号 (PC、DVI、HDMI または DP(ディスプレイ
ポート)) を直接選択します。
TTX/MIX
TV チャンネルは、テレテキスト経由で文字情報サービスを
提供します。
- テレテキスト ボタン
TV チューナー ボックスがインストールされているときに
有効になります。
MTS/DUAL
MTSMTS (マルチチャンネル テレビ ステレオ) モードを選択
できます。
音声タイプ MTS/S_Mode デフォルト
FM ステレオ モノラル モノラル 手動変更
ステレオ モノラル ↔ ステ
レオ
SAP モノラル ↔ SAP モノラル
DUALSTEREO/MONO、DUAL l / DUAL ll および MONO/NICAM MONO/
NICAM STEREO は、放送のタイプに応じて TV の視聴中に
リモコンの DUAL ボタンで操作することができます。
TV チューナー ボックスがインストールされているときに
有効になります。
はじめに ENTER/PRE-CH このボタンを使用して、前のチャンネルに直ちに戻りま
す。
TV チューナー ボックスがインストールされているときに
有効になります。
MUTE
音声の出力を一時的に停止(ミュート)します。これは画
面の左下隅に表示されます。消音モードで MUTE または -
VOL + が押されると、音声が再度聞こえるようになりま
す。
CH/P
TV モードで、TV のチャンネルを選択します。
TV チューナー ボックスがインストールされているときに
有効になります。
TV
TV モードを直接選択します。
TV チューナー ボックスがインストールされているときに
有効になります。
MENU オンスクリーン メニューを開いたり、メニューを終了し
たり、調整メニューを閉じたりします。
RETURN
前のメニューに戻ります。
EXIT
メニュー画面を終了します。
MagicInfo
MagicInfo クイック起動ボタン
注意
MagicInfo をサポートしない製品では、このボタンが無効
になっています。
はじめに接続
コンピュータの接続
コンピュータをモニターに接続するにはいくつかの方法があります。以
下のオプションから選択してください。
ビデオカードの D-sub(アナログ)コネクタを使用します。
• D-sub は、LCD ディスプレイ背面の 15-pin の [RGB/COMPONENT IN]
ポートとコンピュータの 15-pin D-sub ポートを接続します。
ビデオカードの DVI(デジタル)コネクタを使用します。
• DVI ケーブルは、LCD ディスプレイ背面の [DVI IN] ポートとコンピ
ュータの DVI ポートを接続します。
ビデオカードの (デジタル) コネクタを使用します。
• LCD ディスプレイの [HDMI IN 1] ポートを HDMI ケーブルを使用し
て PC の HDMI ポートに接続します。
HDMI注意
HDMI ケーブルで PC と接続したときには、入力信号として HDMI2
(460UT-2, 460UT-B モデルの場合のみ) または HDMI1 を選択します。
PC からの画像と音声を正常に出力するには、外部入力名編集 で PC を
選択する前に HDMI1 (460UT モデルのみ) または PC を選択します。
DVI 裝置 が選択されているときに音声を有効にするには、ステップ
( ) を使用して接続されていることを確認します。
お使いのコンピュータのオーディオ ケーブルを、コンピュータ背面のオ
ーディオ ポートに接続します。
LCD ディスプレイの電源コードを LCD ディスプレイ背面の電源ポートに
接続します。電源スイッチをオンにします。
注意
オプション品の購入については、SAMSUNG のお近くの販売店にお問い合わせください。
他のデバイスへの接続
注意
• お使いのコンピュータだけでなく、DVD プレイヤー、VCR またはカムコーダーなどの AV
入力機器を LCD ディスプレイに接続することができます。AV 入力デバイスの接続の詳
細については、「LCD ディスプレイの調整」の内容を参照してください。
• LCD ディスプレイの背面の構成は、LCD ディスプレイのモデルによって若干異なる場合
があります。
外部モニターの接続
接続LCD モニターの [DVI OUT(LOOPOUT)] ポートと別のモニターの入力ポー
トを DVI ケーブルで接続します。
LCD モニターの [AUDIO OUT] ポートと別のモニターの入力ポートを DVI
ケーブルで接続します。
注意
[DVI OUT] に接続されている外部モニターの入力信号として、DVI モードを選択します。
DVI OUT は HDCP をサポートしていません。
AV デバイスの接続
1. オーディオ ケーブルを製品の [AV/COMPONENT AUDIO IN [L-AUDIO-R]]
と VCR や DVD プレイヤーなどの外部デバイスのオーディオ ポートに接
続します。
2. ビデオ ケーブルを製品の [AV IN] と外部デバイスのビデオ出力ポート
に接続します。
3. 次に、DVD またはテープを挿入して、DVD、VCR、またはカムコーダーを
スタートさせます。
4. 製品またはリモコンの SOURCE を押して「AV」を選択します。
注意
お使いのコンピュータだけでなく、DVD プレイヤー、VCR またはカムコーダーなどの AV
入力機器を LCD ディスプレイに接続することができます。AV 入力デバイスの接続の詳細
については、「LCD ディスプレイの調整」の内容を参照してください。
接続カムコーダーへの接続
1. カムコーダーの AV 出力ジャックの場所を確認します。通常は、カムコ
ーダーの側面または背面にあります。カムコーダーの VIDEO OUTPUT ジ
ャックと LCD ディスプレイの [AV IN] をビデオ ケーブルで接続しま
す。
2. オーディオ ケーブルをカムコーダーの AUDIO OUTPUT ジャックと LCD
ディスプレイの [AV /COMPONENT AUDIO IN [L-AUDIO-R]] に接続します。
3. 製品またはリモコンの SOURCE を押して「AV」を選択します。
4. 続いて、テープを挿入したカムコーダーをスタートします。
注意
ここに示した音声ビデオ ケーブルは、通常カムコーダーに付属しています。
(付属していない場合には、お近くの電器店でご購入ください)
カムコーダーがステレオの場合には、2 本のケーブルを接続する必要があります。
HDMI ケーブルを使用して接続する
接続1. HDMI ケーブルを製品の [HDMI IN 2 (MAGICINFO)] (460UT-2, 460UT-B
モデルのみ) または [HDMI IN 1] とデジタル デバイスの HDMI 出力ポ
ートに接続します。
2. 製品またはリモコンの SOURCE を押して「HDMI1 / HDMI2 (460UT-2,
460UT-B モデルのみ)」を選択します。
注意
HDMI モードでは、PCM フォーマットの音声のみサポートしています。
DVI - HDMI ケーブルを使用して接続する
DVI-HDMI ケーブルを製品の [HDMI IN 2 (MAGICINFO)] (460UT-2, 460UTB モデルのみ) または [HDMI IN 1] とデジタル デバイスの DVI 出力ポ
ートに接続します。
RCA - ステレオ (PC 用) ケーブルの赤および白のジャックをデジタル出
力デバイスの同じ色の音声出力端子に接続し、反対側のジャックを LCD
ディスプレイの [RGB/DVI/DP/HDMI AUDIO IN] 端子に接続します。
3. 製品またはリモコンの SOURCE を押して「HDMI1 / HDMI2 (460UT-2,
460UT-B モデルのみ)」を選択します。
接続DVD プレイヤーの接続
RGB to Component ケーブルで LCD ディスプレイの [RGB/COMPONENT
IN] ポートと DVD プレイヤーの PR, Y, PB ジャックを接続します。
オーディオ ケーブルのセットを LCD ディスプレイの [AV/COMPONENT
AUDIO IN [L-AUDIO-R]] と DVD プレイヤーの AUDIO OUT ジャックの間
に接続します。
注意
• 製品またはリモコンの SOURCE を押して「コンポ一ネント」を選択します。
• 次に、DVD ディスクを挿入して DVD プレイヤーをスタートさせます。
• RGB to Component ケーブルはオプションです。
• コンポーネント ビデオについては、お使いの DVD のマニュアルを参照してください。
DTV セット トップ (ケーブル/衛生) ボックスの接続
接続RGB to Component ケーブルで LCD ディスプレイの [RGB/COMPONENT
IN] ポートとセット トップ ボックスの PR, Y, PB ジャックを接続しま
す。
オーディオ ケーブルのセットを LCD ディスプレイの [AV/COMPONENT
AUDIO IN [L-AUDIO-R]] とセット トップ ボックスの AUDIO OUT ジャッ
クの間に接続します。
注意
• 製品またはリモコンの SOURCE を押して「コンポ一ネント」を選択します。
• コンポーネント ビデオについては、お使いのセット トップ ボックスのマニュアルを
参照してください。
オーディオ システムへの接続
1. オーディオ システムの AUX L、R ジャックと LCD ディスプレイの
[AUDIO OUT] をオーディオ ケーブルで接続します。
LAN ケーブルの接続
接続1. 製品の [LAN] ポートと PC の [LAN] ポートを LAN ケーブルで接続しま
す。
注意
460UTn-2, 460UTn-B モデルのみ。
USB デバイスの接続
1. マウスやキーボードなどの USB 機器を接続することができます。
注意
460UTn-2, 460UTn-B モデルのみ。
接続トラブルシューティング
セルフテスト機能チェック
注意
お問い合わせの前に、以下の項目についてチェックしてください。問題が解決しない場合
には、お客様相談ダイヤルにお問い合わせください。
セルフテスト機能チェック
1. コンピュータと LCD ディスプレイの両方をオフにします。
2. コンピュータの背面からビデオケーブルを取り外します。
3. LCD ディスプレイをオンにします。
ビデオ信号が検出されない場合でも LCD ディスプレイが正常に動作しているときに
は、下記の図 (「信号がありません」) が黒色の背景で表示されます。自己テスト モ
ードでは、LED 電源インジケータは緑色のままで、画像が画面内を動き回ります。
4. LCD ディスプレイをオフにして、ビデオ ケーブルを接続しなおします。次にコンピュ
ータと LCD ディスプレイの両方をオンにします。
前の手順を行った後でも LCD ディスプレイ画面に何も映らない場合は、ビデオ コントロ
ーラおよびコンピュータ システムをチェックしてください。LCD ディスプレイは正常に動
作しています。
警告メッセージ
画面は 1920 x 1080 の解像度でも表示することができます。 ただし、「画面の解像度を
変更するか、現在のモードのままにすることができます」というメッセージが短時間表示
されます。周波数が 85Hz を越える場合には、LCD ディスプレイでは 85Hz を越える周波
数をサポートしていないため、黒色の画面が表示されます。
注意
LCD ディスプレイがサポートしている解像度または周波数については、仕様 > プリセッ
ト タイミング モードを参照してください。
メンテナンスと清掃
1) LCD ディスプレイ筐体のメンテナンス
電源コードを抜いてから、柔らかい布で拭き取ります。• ベンゼン、シンナーまたはその他の引火性物質を使
用しないでください。
2) フラットパネルディスプレイ画面のメンテナンス
柔らかい布 (綿ネル) で拭き取ります。
• アセトン、ベンゼンまたはシンナーは使用してはな
りません。
(スクリーン表面の傷または劣化の原因となること
があります)
• これらの物質を使用したことによって発生した損害
は、すべてユーザーの責任となります。
症状と推奨される措置
注意
LCD ディスプレイは、コンピュータから受信した視覚信号を再生します。したがって、コン
ピュータまたはビデオカードに問題がある場合には、色彩の異常、ノイズなどのトラブル
が発生することがあります。この場合には、まず問題の原因をチェックしてから、お客様
相談ダイヤルまたは販売店にお問い合わせください。
1. 電源コードおよびビデオ ケーブルがコンピュータに正しく接続されているかどうかを
チェックします。
2. 起動時にコンピュータからビープ音が 3 回聞こえるかチェックします。
(この場合にはお問い合わせください)
3. ビデオカードを自分でインストールするか PC を組み立てた場合には、アダプタ (ビデ
オ) がインストールされているかどうか確認します。
4. ビデオ画面のスキャン速度が 50~ 85Hz の範囲内にあるかどうかチェックします。
(最大解像度を使用しているときは、60 Hz を超えてはなりません)
5. アダプタ (ビデオ) ドライバのインストールに問題がある場合には、コンピュータを
セーフ モードで起動して、[Control Panel (コントロール パネル)] −> [System (シ
ステム)] −> [Device Manger (デバイス マネージャ)] でディスプレイ アダプタを削
除して、コンピュータを再起動してアダプタ (ビデオ) ドライバを再インストールし
ます。
チェックリスト
注意
• 以下の表は、発生する可能性のある問題とその解決方法を示しています。お客様相談ダ
イヤルへ連絡する前に、このセクションに解決法が記載されていないかご確認くださ
い。不明な点がある場合には、お客様相談窓口にお電話いただくか、販売店にお問い合
わせください。
• ネットワークについての詳しい情報は、MagicInfo のトラブルシューティングのセクシ
ョンを参照してください。
トラブルシューティングインストールに関する問題 (PC モード)
注意
LCD ディスプレイのインストールに関連する問題とその解決方法が記載されています。
Q: LCD ディスプレイの画面がちらつく。
A: コンピュータと LCD ディスプレイとの間を接続している信号ケーブルが、しっかり
と接続されているか確認します。
(コンピュータの接続を参照)
画面に関する問題
注意
LCD ディスプレイの画面に関連する問題とその解決方法が記載されています。
Q: 画面が空白になり、電源インジケータがオフになる。
A: 電源コードをしっかりと接続してから LCD ディスプレイをオンにします。
(コンピュータの接続を参照)
Q: "信号ケーブルを確認してください」というメッセージ。
A: PC またはビデオ ソースに信号ケーブルがしっかり接続されていることを確認しま
す。
(コンピュータの接続を参照)
A: PC またはビデオ ソースがオンになっていることを確認します。
Q: "最適なモードが選択されていません」というメッセージ。
A: ビデオ アダプタの最大解像度と周波数を確認します。
A: プリセット タイミング モードのチャートに記載されているデータとこれらの値を比
較します。
Q: 映像が縦に流れる。
A: 信号ケーブルがしっかりと接続されているか確認します。必要に応じて再度接続しま
す。
(コンピュータの接続を参照)
Q: 画像がはっきりしない。画像がぼやける。
A: Frequency 粗調整 および 微調整 の調整を実行します。
A: すべてのアクセサリ (ビデオ拡張ケーブルなど) を取り外してから再度オンにしま
す。
A: 解像度と周波数を推奨の範囲に設定します。
Q: 画像が安定せず、揺れる。
A: コンピュータのビデオ カードに対して設定した解像度および周波数が、LCD ディス
プレイがサポートしている範囲から外れていないか確認します。外れていない場合に
トラブルシューティングは、LCD ディスプレイのメニューとプリセット タイミング モードに記載されている
現在の情報を参照して再度設定します。
Q: 映像にゴーストが発生する。
A: コンピュータのビデオ カードに対して設定した解像度および周波数が、LCD ディス
プレイがサポートしている範囲から外れていないか確認します。外れていない場合に
は、LCD ディスプレイのメニューとプリセット タイミング モードに記載されている
現在の情報を参照して再度設定します。
Q: 映像が明るすぎる、または暗すぎる。
A: 明るさ と コントラスト を調整します。
(明るさ、コントラスト を参照してください)
Q: 画面の色が正しくない。
A: OSD カラー調整メニューの [ユーザー調整] を使用して、色を調整します。
Q: 暗い影によってカラー画像が歪む。
A: OSD カラー調整メニューの [ユーザー調整] を使用して、色を調整します。
Q: 白色が正しく表示されません。
A: OSD カラー調整メニューの [ユーザー調整] を使用して、色を調整します。
Q: 電源インジケータが点滅する。
A: LCD ディスプレイが OSD メモリに変更された設定を保存しています。
Q: 画面が点滅し、電源インジケータが 0.5 ~ 1 秒間隔で点滅します。
A: LCD ディスプレイが電源管理システムを使用しています。キーボードのいずれかのキ
ーを押します。
Q: 画面に何も表示されず、点滅します。
A: [MENU] ボタンを押すと画面に「TEST GOOD」メッセージが表示される場合は、PDP デ
ィスプレイとコンピュータのケーブル接続を確認し、コネクタを正しく接続してくだ
さい。
音声に関する問題
注意
音声信号に関する問題とその解決方法を以下に示します。
Q: 音声が聞こえない。
A: LCD ディスプレイの音声入力ポートとサウンドカードの音声出力ポートにオーディオ
ケーブルがしっかりと接続されていることを確認します。
(コンピュータの接続を参照)
A: 音量レベルをチェックします。
Q: 音量が低すぎる。
A: 音量レベルをチェックします。
トラブルシューティングA: 音量を最大に調整しても音が小さすぎる場合には、コンピュータのサウンドカードま
たはソフトウェアプログラムの音量コントロールをチェックします。
Q: 音量が大きすぎるか小さすぎる。
A: 高音 および 低音 を適切なレベルに調整します。
リモコンに関する問題
注意
リモコンに関連する問題とその解決方法が記載されています。
Q: リモコンのボタンが応答しない。
A: バッテリの極性 (+/-) を確認します。
A: バッテリが消耗していないかチェックします。
A: 電源がオンになっているかどうかをチェックします。
A: 電源コードがしっかりと接続されているか確認します。
A: 付近に特殊な蛍光灯またはネオン ランプがないかチェックします。
Q & A
Q: 周波数の変更方法は?
A: 周波数は、ビデオ カードの再設定によって変更することができます。
注意
ビデオ カードでサポートされている周波数は、使用しているドライバのバージョン
によって異なることにご注意ください。(詳細はコンピュータまたはビデオカードの
マニュアルを参照してください)
Q: 解像度の変更方法は?
A: Windows XP:
[Control Panel (コントロール パネル)] → [Appearance and Themes (デスクトッ
プの表示とテーマ)] → [Display (画面)] → [Settings (設定)] で解像度を設定し
ます。
A: Windows ME/2000:
[Control Panel (コントロール パネル)] → [Display (画面)] → [Settings (設
定)] で解像度を設定します。
* 詳細についてはビデオカードのメーカーにお問い合わせください。
Q: 省電力機能の設定方法は?
A: Windows XP:
[Control Panel (コントロール パネル)] → [Appearance and Themes (デスクトッ
プの表示とテーマ)] → [Display (画面)] → [Screen Saver (スクリーン セイバ
ー)] で解像度を設定します。
コンピュータの BIOS 設定で機能を設定します。(Windows/コンピュータのマニュア
ルを参照してください)
トラブルシューティングA: Windows ME/2000:
[Control Panel (コントロール パネル)] → [Display (画面)] → [Screen Saver
(スクリーン セイバー)] で解像度を設定します。
コンピュータの BIOS 設定で機能を設定します。(Windows/コンピュータのマニュア
ルを参照してください)
Q: 筐体/LCD パネルをきれいにしたいのですが?
A: 電源コードを抜き、LCD ディスプレイを柔らかい布で洗剤また真水を使って清掃しま
す。
洗剤が残ったままにしたり、筐体を傷つけないようにしてください。水が LCD ディ
スプレイの中に入らないようにしてください。
Q: ビデオの再生方法は?
A: ビデオは、MPEG1 および WMV コーデックのみをサポートしています。ビデオを再生す
るには、対応するコーデックをインストールします。互換性がないコーデックがある
ことに注意してください。
注意
お客様相談ダイヤルへ連絡する前に、このセクションに解決法が記載されていないかご確
認ください。不明な点がある場合には、お客様相談窓口にお電話いただくか、販売店にお
問い合わせください。
トラブルシューティング
Skype™
pour téléviseurs
Samsung
Présentation de Skype 2
Pour vous connecter avec un
compte existant 3
Pour vous connecter avec la
Reconnaissance faciale 4
Reconnaissance faciale 5
Création d'un compte 6
Affichage 7
Ajout d'un contact 8
Pour appeler un contact 9
Réception 10
Histoire 11
Options Skype 12
Cmde vocale et par mouvement 13
* Les images et les couleurs peuvent être modifiées
Rev 1.0 sans préavis.2
Présentation de Skype
Passez des appels audio et vidéo avec Skype sur votre téléviseur.
O C'est possible grâce à SMART HUB, qui vous permet de disposer, sur votre téléviseur, de fonctions ludiques et utiles en provenance directe du Web.
✎ REMARQUE
x Branchez directement votre webcam SAMSUNG sur le téléviseur, en ne passant pas par un concentrateur USB.
x Si la webcam ne fonctionne pas correctement, éteignez et rallumez le téléviseur, et relancez Skype.
x Skype est désactivé lorsque le téléviseur est éteint.
x La qualité de la voix peut être diminuée dans un environnement bruyant.
x L'utilisation d'un réseau sans fil peut dégrader la qualité de l'appel.
x L'utilisation du logiciel Skype est soumis au Contrat de Licence Utilisateur Final (CLUF) de Skype (skype.com/legal/eula),
aux conditions de service de Skype (skype.com/legal/tos) et à la politique de confidentialité de Skype (skype.com/legal/privacy/general).
x En cas de suppression de Skype, les informations enregistrées (Historique et Options) sont supprimées.
x Pour obtenir de l'aide sur l'utilisation de Skype, visitez skype.com
x Vous devez configurer votre réseau avant d'utiliser Skype sur votre téléviseur. Reportez-vous aux instructions du présent manuel.
x La sonnerie retentit lorsqu'une personne vous appelle pendant que vous regardez la télévision ou utilisez une application Skype.
x Pour utiliser Skype, vous avez besoin de la caméra TV. Achetez la caméra TV de SAMSUNG si votre téléviseur n'en dispose pas d'une intégrée.
x Les caméras TV commercialisées en 2010 et les téléviseurs SAMSUNG commercialisés en 2012 ne sont pas compatibles.
x Seule la version 4.2 ou supérieure de Skype est prise en charge par les ordinateurs tournant sous Windows.
x Seule la version 5.0 ou supérieure de Skype est prise en charge par les ordinateurs tournant sous Macintosh.
x Non pris en charge par les ordinateurs tournant sous Linux.3
Bienvenue dans Skype !
Ouv sess Créer compte
Bienvenue dans Skype !
Nom Skype
Mot de passe
Se connecter au démarrage de Skype
Me connecter quand la TV s'allume
Ouv sess
Pour vous connecter avec un compte existant
2 Renseignez le champ Nom
Skype et Mot de passe.
Utilisez les touches du clavier pour renseigner les champs
Nom Skype et Mot de passe.
3 Appuyez sur Ouv sess.
Entrez votre pseudo Skype.
Nom Skype
Supp. tt
Supprimer
Espace
Numeric Paramètres OK Annuler
17/32
1 Appuyez sur Ouv sess.
Lorsque vous lancez Skype pour la première fois sur votre téléviseur, renseignez les champs Nom Skype et Mot de passe ou sélectionnez l'option Créer
compte. Si la connexion n'est pas établie, vérifiez la connexion réseau.
Mode Reconnaissance faciale
App. sur [Enter]
App. sur [Enter]4
R Retour
Bienvenue dans Skype !
Nom Skype
Mot de passe
Se connecter au démarrage de Skype
Me connecter quand la TV s'allume
Ouv sess Mode Reconnaissance faciale
App. sur [Enter]
App. sur [Enter]
Pour vous connecter avec la Reconnaissance faciale
x Vous pouvez ouvrir une session dans Skype en utilisant la Reconnaissance faciale sur votre téléviseur prenant en charge l'Interaction INTELLIGENTE
(Cmde vocale et par mouvement).
[ Pour que la fonction Reconnaissance faciale soit opérationnelle, une image miniature de votre visage doit être enregistrée dans votre téléviseur à des fins
de connexion.
[ Se connecter à Skype à l'aide de la Reconnaissance faciale peut être moins sécurisé qu'utiliser un identifiant et un mot de passe.
Bienvenue dans Skype !
Vous pouvez vous connecter à l'aide de la reconnaissance faciale.
Placez votre visage devant la TV au niveau de la caméra.
Mode mot de passe Arrêter
R Retour
1 Appuyez sur Mode Reconnaissance
faciale.
2 Le téléviseur lance la
Reconnaissance faciale.
• Tournez votre tête vers le téléviseur en tenant votre visage
au niveau de la caméra. Le téléviseur reconnaîtra votre visage
automatiquement.5
Reconnaissance faciale
Reconnaissance faciale
Vérifiez que votre visage est au centre de l'écran.
Patientez jusqu'à ce que le rectangle au centre de l'écran devienne vert.
Arrêter
R Retour
2 L'écran Reconnaissance faciale
s'affiche.
• Veillez à ce que votre visage soit au centre du cercle.
• Attendez jusqu'à ce que le rectangle au centre de l'écran
devienne vert.
Skype Credit : 0
Options Skype
Paramètres
Chat
Histoire
Appel. tél.
Contacts
Gestionnaire compte
Modif. MDP
Supprimer le visage reconnu
Reconnaissance faciale
R Retour
1 Sélectionnez Paramètres
→ Gestionnaire compte →
Reconnaissance faciale.6
Bienvenue dans Skype !
Ouv sess Créer compte
Création d'un compte
1 Appuyez sur Créer compte.
Créer un compte Skype
Créer un nom Skype
Mot de passe
Utilisez ce pseudo pour vous connecter à Skype.
Vous pourrez communiquer votre pseudo Skype à vos
amis de façon à ce qu'ils puissent vous ajouter à leurs
contacts Skype.
Vous en aurez besoin pour vous connecter à Skype ou pour
gérer votre compte en ligne.
Retour
2 Renseignez le champ
Créer un nom Skype et
Mot de passe.
3 Entrez votre Nom complet et
E-mail.
Créer un compte Skype
Nom complet
E-mail
Le nom que vous entrez ici est celui qui apparaîtra dans la
liste de contacts de vos contacts Skype.
Nous en aurons besoin si vous rencontrez des problèmes
pour accéder à votre compte ou si vous oubliez votre
mot de passe.
Retour Suivant Créer un compte Skype
Contrat de licence
AFFICHER LES CONDITIONS D'UTILISATION
AFF. ACCORD DE CONFIDENTIALITE
Aucun appel d'urgence.
Skype ne remplace pas votre téléphone ordinaire et ne peut pas être
utilisé pour les appels d'urgence.
Oui. J'ai lu et j'accepte cond. d'utili. ci-après.
Retour Accepter
R Retour
4 Sélectionnez Accepter.
Sélectionnez l'une des conditions pour consulter des
informations supplémentaires.7
Appel visio Appel vocal
1/1 Pages
Chat
Contacts
a Déconn. { Ajouter un contact R Retour
Chat
Histoire
Appel. tél.
Paramètres
Skype Credit : 0
Echo / Sound Test Service
Affichage
Cette zone affiche votre
nom Skype, votre état
en ligne, votre message
d'humeur ainsi que votre
image de profil.
Votre liste de contacts. Vous
pouvez sélectionner le mode
Appel visio, Appel vocal ou Chat.
Crédit Skype
Ce menu permet de sélectionner
les options Contacts, Chat,
Histoire, Appel. tél. et
Paramètres. Dans l'option de
menu, appuyez sur ENTERE
et choisissez l'option appropriée.
a Déconn. : Sélectionnez cette option pour vous déconnecter.
{ Ajouter un contact : Ajouter un contact Skype ou un numéro de
téléphone.
R Retour / Fin appel : Permet de revenir au menu précédent. / Ferme
l'application Skype une fois l'appel terminé.8
1/1 Pages
Contacts
Chat
Histoire
Appel. tél.
Paramètres
Skype Credit : 0
Echo / Sound Test Service
Chat
Sélectionner type de contact
Ajouter un contact
Ajouter contact Skype
Ajouter numéro de téléphone
R Retour
Appel visio Appel vocal
1/1 Pages
Contacts Chat
a Déconn. { Ajouter un contact R Retour
Chat
Histoire
Appel. tél.
Paramètres
Skype Credit : 0
Echo / Sound Test Service
Ajout d'un contact
1 { Appuyez sur Ajouter un contact.
2 Sélectionnez un contact.
• Ajouter contact Skype : Entrez le nom Skype de la personne,
son nom complet ou son adresse e-mail.
• Ajouter numéro de téléphone : Entrez le nom et le numéro
de téléphone.9
Appel visio Appel vocal
1/1 Pages
Contacts Chat
Chat
Histoire
Appel. tél.
Paramètres
Skype Credit : 0
Echo / Sound Test Service
Pour appeler un contact
1 Appuyez sur Appel visio ou Appel vocal.
Appel...
Annuler
samsung_skype1
1/1 Pages
Chat
Contacts
Chat
Histoire
Appel. tél.
Paramètres
Skype Credit : 0
Echo / Sound Test Service
• L'illustration du manuel peut différer
en partie de la forme réelle.
Appel visio Appel vocal
Durée d'appel 00:03:10
Fin appel Lancer vidéo Vol. micro En attente
T Outils } Liste contacts R Retour
Durée d'appel 00:00:42
Fin appel Arrêter vidéo Vol. micro En attente
T Outils b Plein écran } Liste contacts R Retour10
Durée d'appel 00:03:10
Fin appel Start Video Vol. micro En attente
T Outils } Liste contacts R Retour
Durée d'appel 00:00:42
Fin appel Arrêter vidéo Vol. micro En attente
T Outils b Plein écran } Liste contacts R Retour
• Si vous recevez un appel de conférence, l'option Vidéo est désactivée.
Réception
Pendant un appel vidéo ou visio.
Fin appel: Raccrocher.
Arrêter vidéo: Eteint la caméra.
Vol. micro: Permet de régler le volume du micro.
En attente / Reprendre: Suspend/reprend d'appel.
✎ Un contact Skype verra s'afficher un message lorsque
l'appel est mis en attente.
Lancer vidéo: Passe à un appel vidéo.
x B (Plein écran): Permet de passer en mode
plein écran.
x D (Liste contacts): Affiche la liste des contacts.
samsung_skype1
Appel...
Vidéo Voix Refuser
Appel visio Appel vocal
Refuse un appel.11
Afficher profil
Envoi msg vocal
Aj. ds contacts
Bloquer
Suppr. entrée
Déconn.
R Retour
Appel visio
Pages
Chat
Contacts
Histoire
Appel. tél.
Paramètres
Skype Credit : 0
Histoire
Chaque appel est accompagné
d'une icône.
Icônes Signification
Appel entrant
Appel sortant
Appel manqué
Message vocal
entrant
Message vocal
manqué
Conférence audio
entrante
Conférence audio
manquée
• Afficher profil : Affichez le profil du contact sélectionné.
• Envoi msg vocal : Envoyez un message vocal au contact sélectionné.
• Aj. ds contacts: Ajoutez cette personne comme contact. Cette option est
disponible lorsque cette personne n'est pas enregistrée dans votre liste de
contacts.
• Bloquer : Empêchez cette personne de vous contacter.
• Suppr. entrée : Supprimez cet élément de votre historique.
• Déconn. : Permet de se déconnecter.
✎ L'historique peut être limité par la capacité de mémoire.
✎ C'est l'heure réglée sur le téléviseur qui est enregistrée dans l'historique.
Affiche l'historique des appels passés, du plus récent (en haut) au plus ancien (en bas).12
Options Skype
a Sign Out R Return
Etat
Modifier profil
Changer photo
Gestionnaire compte
Paramètres
Chat
Histoire
Appel. tél.
Contacts
Skype Credit : 0
Paramètres généraux
Options Skype
R Retour
Paramètres vidéo
Param. confid.
Utilisateurs bloqués
Transfert d'appel
Messagerie vocale
A propos de Skype
Démar. auto qd allumage de TV :
Afficher une notification en cas de
connexion :
Arrêt
Arrêt
Options Skype
1 Sélectionnez Paramètres →
Options Skype.
2 Modifiez la ou les options de votre
choix.
• Paramètres généraux : Indiquez si vous voulez que Skype se lance
automatiquement lorsque vous allumez le téléviseur.
• Paramètres vidéo : Réglez les paramètres de confidentialité de la vidéo.
Choisissez de qui vous acceptez des appels vidéo en sélectionnant Toute
personne, Uniquement personnes de la liste Contacts ou Personne.
• Param. confid.: Choisissez de qui vous acceptez des appels. Sélectionnez
Autoriser tout le monde à me contacter ou Pers. ds liste contacts peuvent
me contac..
• Utilisateurs bloqués: Si vous ne voulez pas que quelqu'un vous contacte,
bloquez-le en entrant son nom Skype ou son numéro de téléphone. Toutes
les personnes bloquées apparaissent dans cette fenêtre. Vous pouvez aussi
bloquer quelqu'un à partir de la liste des contacts et de l'historique en
sélectionnant le contact et en appuyant sur TOOLST.
• Transfert d'appel: Pour renvoyer des appels de votre compte Skype lorsque
vous n'êtes pas sur Skype, ajoutez les numéros de téléphone vers lesquels les
appels doivent être renvoyés. Sélectionnez le pays et entrez le numéro avec
l'indicatif régional. Entrez le délai après lequel l'appel doit être renvoyé. Vous
devez acheter du crédit Skype sur skype.com pour utiliser cette fonction.
• Messagerie vocale: Cette fonction permet aux personnes qui vous appellent
de laisser des messages vocaux si vous êtes absent. Vous pouvez écouter
les messages à partir de n'importe quelle connexion Skype. Pour plus
d'informations ou pour recevoir le message vocal, sur skype.com, cliquez sur
Account.
• A propos de Skype: Cette option permet d'afficher les informations de
copyright de Skype.13
Smart TV Hi TV
Hello world!
Echo / Sound Test Service
Dites le nom de la personne que vous voulez appeler.
Appel visio Appel vocal
1/1 Pages
Chat
Contacts
a Sign Out { Add a Contact R
Chat
Histoire
Appel. tél.
Paramètres
Skype Credit : 0
Vidéo
Voix
Annuler
Smart TV Hi TV
Hello world!
Echo / Sound Test Service
Appel visio Appel vocal
1/1 Pages
Chat
Contacts
a Déconn. { Ajouter un contact R Return
Chat
Histoire
Appel. tél.
Paramètres
Skype Credit : 0
Annuler
Sonnerie…
Annuler
young470
Hello world!
Echo / Sound Test Service
1/1 Pages
Chat
Contacts
Chat
Histoire
Appel. tél.
Paramètres
Skype Credit : 0
Cmde vocale et par mouvement
1 Dites « Hi TV(Mots déclencheurs) » et prononcez le
nom de la personne que vous voulez appeler.
3 Dites Appel visio ou Appel
vocal pour passer l'appel.
2 Dites l'un des deux.
x Vous pouvez appeler ou évoluer dans Skype grâce à Cmde vocale et par mouvement sur le téléviseur, prenant en charge l'Interaction INTELLIGENTE
(Cmde vocale et par mouvement).
x Vous ne pouvez pas utiliser la Commande vocale pendant un appel.
x Commande vocale peut être affectée par les noms difficiles à prononcer, comme ceux contenant des caractères spéciaux ou des lettres de l'alphabet et
des nombres. Vous pouvez le modifier en utilisant Renommer.
x Pour plus d'informations sur Smart Interaction, reportez-vous à la section "Smart Interaction" dans le manuel électronique ou dans le manuel
d'utilisation.
E-MANUAL
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model______________ Serial No.______________Channel Menu
• Connecting the TV 1
• Using the INFO button
(Now & Next guide) 24
• Using the Channel Menu 26
• Memorizing Channels 66
• Other Features 81
Basic Feature
• Changing the Preset Picture Mode 97
• Adjusting Picture Settings 102
• Changing the Picture Size 107
• Changing the Picture Options 121
• Using the TV with Your PC 139
• Changing the Preset Sound Mode 143
• Adjusting Sound Settings 145
Preference Features
• Connecting to the Network 161
• Setting up a Wired Network 178
• Setting up the Wireless Network 191
• Managing the Network Connected
Devices 218
• Setting the Time 231
• Blocking Programmes 248
• Economical Solutions 253
• Picture In Picture (PIP) 257
• Other Features 262
• Support Menu 291
ContentsAdvanced Features
• Using the 3D function 317
• Smart Hub 332
• Customizing the Home Screen 358
• Using Samsung Apps 388
• Search 399
• Your Video 407
• Family Story 424
• Fitness 478
• Kids 489
• Web Browser 505
• Skype 535
• AllShare Play 539
• Using the AllShare Play 562
• My list (In AllShare Play) 566
• Videos (In AllShare Play) 585
• Photos (In AllShare Play) 604
• Music (In AllShare Play) 621
• Recorded TV (In AllShare Play) 629
• Timeshift 643
• Using the DLNA Function 653
• Anynet+ (HDMI-CEC) 664Other Information
• Troubleshooting 682
• Picture Quality (Troubleshooting) 683
• Sound Quality (Troubleshooting) 691
• No Picture, No Video (Troubleshooting) 696
• RF (Cable / Aerial) Connection
(Troubleshooting) 700
• PC Connection (Troubleshooting) 703
• Network Connection (Troubleshooting) 704
• Recording / Timeshift (Troubleshooting) 705
• Others (Troubleshooting) 714
• Anynet+ (HDMI-CEC) (Troubleshooting) 729
• AllShare Play (Troubleshooting) 737
• Smart Hub (Troubleshooting) 738
• Web Browser (Troubleshooting) 740
• Supported Subtitle and
AllShare Play file formats 748
• Data Service 757
• HbbTV 765
• Connecting to a TV Viewing Card slot 769
• Teletext Feature 779
• Anti-theft Kensington Lock 786
• Licence 791 Connecting the TV
Connecting to an Aerial or Satellite
The displayed image may differ depending on the model.
or
TV rear panel
Channel Menuor
The displayed image may differ depending on the model.
TV rear panel
Connecting to an AV Device
Using a HDMI (up to 1080p) The displayed image may differ depending on the model.
TV rear panel The displayed image may differ depending on the model.
TV side panel
Using an HDMI cable (up to 1080p)
N HDMI IN 1(DVI), HDMI IN 2(ARC),
HDMI IN 3
● For better picture and audio quality, connect to a digital device using an
HDMI cable.
● An HDMI cable supports digital video
and audio signals, and does not require
an audio cable.
– To connect the TV to a digital device
that does not support HDMI output,
use an HDMI/DVI and audio cables.
● The picture may not display normally
(if at all) or the audio may not work if
an external device that uses an older version of HDMI mode is connected to
the TV. If such a problem occurs, ask
the manufacturer of the external device
about the HDMI version and, if out of
date, request an upgrade.
● for LED 6500 Series and above Be sure to
use an HDMI cable with a thickness of
14 mm or less.
● Be sure to purchase a certified HDMI
cable. Otherwise, the picture may not
display or a connection error may occur.
● A basic high-speed HDMI cable or one
with Ethernet is recommended. This
product does not support the Ethernet
function via HDMI.
● This product supports the 3D and ARC
(Audio Return Channel) functions via an
HDMI cable. Note that the ARC function
is supported by the HDMI IN 2(ARC)
port only.
● The ARC function allows digital audio to output via the HDMI IN 2(ARC) port.
It can be enabled only when the TV is
connected with an audio receiver that
supports the ARC function.
Using a Scart Cable
The displayed image may differ depending on the model.
TV rear panel The displayed image may differ depending on the model.
TV side panel
Using a Component (up to 1080i) The displayed image may differ depending on the model.
TV rear panel The displayed image may differ depending on the model.
TV rear panel
Using a Component (up to 1080i) or an
Audio/Video (480i only) and a Scart Cable
N In Ext. mode, DTV Out supports
MPEG SD Video and Audio only.N When connecting to AV IN or
COMPONENT/AV IN connect the AV
connector (yellow) to the TV jack
(Green). (Depending on the model)
N To obtain the better picture quality,
the Component connection or Scart
connection are recommended over
the A/V connection.
Connecting to an Audio device
Using an Optical (Digital) Connection The displayed image may differ depending on the model.
TV rear panel The displayed image may differ depending on the model.
TV side panel
DIGITAL AUDIO OUT (OPTICAL)● When you connect a Digital Audio
System to the DIGITAL AUDIO OUT
(OPTICAL) jack, decrease the volume
of both the TV and the system.
● Use the System speakers for audio.
● 5.1 CH (channel) audio is available when
the TV is connected to an external
device supporting 5.1 CH.
● When the receiver (home theatre) is set
to on, you can hear sound output from
the TV’s optical jack. When the TV is receiving a DTV signal, the TV will
send 5.1 CH sound to the home theatre
receiver. When the source is a digital
component such as a DVD / Bluray
player / cable box / STB (Set-Top-Box)
satellite receiver and is connected to the
TV via HDMI, only 2 CH audio will be
heard from the home theatre receiver. If
you want to hear 5.1 CH audio, connect
the digital audio out jack from your
DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier
or home theatre.
Using a Headphone Connection
for LED TV
The displayed image may differ depending on the model.
TV rear panel The displayed image may differ depending on the model.
TV rear panel
Headphones H
You can connect your headphones to
the headphones output on your set.
While the headphones are connected,
the sound from the built-in speakers will be disabled.
● Sound function may be restricted
when connecting headphones to the
TV.
● Headphone volume and TV volume
are adjusted separately.
● The headphones jack supports only
the 3 conductor tip-ring-sleeve (TRS)
type.
Connecting to a PC Using an HDMI/DVI Cable
The displayed image may differ depending on the model.
TV rear panel The displayed image may differ depending on the model.
TV side panel
Using an HDMI cable or an HDMI to DVI
cable
Connecting through the HDMI cable may not be supported depending on
the PC.
Optimal resolution is 1920 X 1080 @ 60
Hz.
N For HDMI/DVI cable connection, you
must use the HDMI IN 1(DVI) jack.
N The interlace mode is not supported.
N The set might operate abnormally
if a non-standard video format is
selected.
N Separate and Composite modes are supported. SOG (Sync On Green) is
not supported.
N PC (D-Sub) input is not supported.Using the INFO button (Now & Next guide)
The display identifies the current
channel and the status of certain audiovideo settings.
The Now & Next guide shows daily
TV programme information for each
channel according to the broadcasting
time.
● Scroll l, r to view information for a
desired programme while watching the
current channel.● Scroll u, d to view information for
other channels. If you want to move to
the currently selected channel, select
E using your remote.Using the Channel Menu
Press the ™ button to select the menu
you want to use. Each screen will be
displayed.
Guide
™ → Guide
The EPG (Electronic Programme Guide)
information is provided by broadcasters.
Using programme schedules provided
by broadcasters, you can specify programmes you want to watch
in advance so that the channel
automatically changes to the selected
programme channel at the specified
time. Programme entries may appear
blank or out of date depending on a
channel status.
Using Channel View
● a (Sche. Mgr): Displays the Schedule
Manager.● b (-24 Hours): Viewing the list of
programmes to be broadcasted before
24 hours.
● { (+24 Hours): Viewing the list of
programmes to be broadcasted after 24
hours.
● } (Ch. Mode): Select the type of
channels you want to display on the
Channel View window.
● ` Information: Displays details of the
selected programme.● k Page: Move to next or previous page.
● E Watch / Schedule: When selecting
the current programme, you can watch
the selected programme. / When
selecting the future programme, you
can reserve to watch the selected
programme.
Channel
™ → Channel
Using this function, you can delete channels, set favourite channels and
edit the channel name for analogue
broadcasts.
N The available items may differ
depending on the selected aerial
source.
● All
Shows all channels.
● TV
Shows TV channels.
● RadioShows radio channels.
● Data/Other
Shows data channels and other
channels.
● Analogue
Shows analogue channels.
● Favourites 1 - Favourites 5
Shows all favourite channels, in up to
five groups. Each group has separate
channels.
N The TV displays favourites only if you have added favourites using Edit
Favourites in the Tools menu.
N If the highlight located in the
Favourites 1 – Favourites 5 category,
you can change the name of
category by selecting b using your
remote.
● Recently Viewed
Shows the most recently viewed
channels.
● Most ViewedShows the most frequently viewed
channels.
Using the coloured and function buttons
with Channel
● a Air / Cable / Satellite for PE570, PE6500,
UE5700, UE6300 Series and above
Select the desired aerial source.
The option may differ depending on
country.
N Appears only if your TV stored both Air and Cable.
● b Delete
Delete the selected channel(s).
● ` Information
Displays details of the selected channel.
● k Page
Scrolls the channel list to the next or
previous page.
● E Select / Deselect
Selects or deselects a channel.
● T ToolsDisplays the option menu.
● R Return
Return to the previous menu.
Using the Tools menu with the Channel
● Edit Favourites
Lets you assign channels you watch
frequently to a favourite group and
remove channels from a favourite
group. You access Edit Favourites on
the Tools menu.● Lock / Unlock
Lock a channel so that the channel
cannot be selected and viewed.
N This function is available only when
the Channel Lock is set to On.
● Rename channel
(Appears only if you have selected an
analogue channel.)
Lets you assign a name of up to five
characters to an analogue channel. For
example, Food, Golf, etc. This makes it easier to find and select the channel.
● Edit Channel Number
Edit the channel number by select the
numbers.
N This function may not be supported
depending on the region.
● Sorting (digital channels only)
Change the list ordered by name or
number.
● Channel Info
Displays information of channel signal. The item may differ depending on
channel.
● Search (when the aerial was set to
Satellite)
Channel scan is started.
● Delete
Delete a channel to display the
channels you want.
● Select All / Deselect All
Select all channels in the list. / Deselect
all channels you selected.To delete a channel from a Category
list on the Channel screen, follow these
steps:
1. If you want to delete a channel,
select a category of the channel.
2. Select a channel in the category list.
A c mark appears to the left of the
channel.
N You can select more than one
channel.
N If you select the selected channel again, a c mark disappears.
3. Open the Tools menu using your
remote.
4. Select Delete. The message Delete
the selected channels? appears.
Select OK.
N You can delete the selected channel
immediately by selecting b using
your remote.
N When you delete a channel in the
Recently Viewed or Most Viewedcategory, the channel will disappear
from the category list. But, the
channel is not deleted.
To set channels as favourites, follow
these steps:
1. Select the All category.
2. Select a channel. A c mark appears
to the left of the channel.
N You can select more than one
channel.N If you select the selected channel
again, a c mark disappears.
3. Open the Tools menu using your
remote.
4. Select the Edit Favourites. The Edit
Favourites screen appears.
5. Select a using your remote. The
selected channel will be moved to
the favourite group.
N Also, you can select a channel in
the Edit Favourites screen.N You can add a favourite channel
to any one of the groups. To
change favourites group, select }
using your remote. Each time you
select }, a favourites group will
be changed.
6. When done, select OK. The channel is
made as a favourite and is assigned
to the favourite group you selected.
N The TV displays the “ ” symbol
next to the channel, indicating it is a favourite.
Using the coloured and function
buttons with Edit Favourites
● On the Edit Favourites screen, you
can use these functions buttons:
– a Add
Add selected channels to the
favourites group.
– } Change Fav.
Change the favourites group. Each time you select } using
your remote, the favourites group
changes.
– Ÿ Go To
You can enter a channel number
immediately using your remote.
– R Return
Return to the previous menu.
● When you highlight a favourite
channel in a favourites group on the
Edit Favourites screen, you can use these options:
– a Delete
Delete the selected channel.
– b Change order
Change the favourite group list
order.
– { Copy
Copy a selected channel to other
favourites groups.
– } Change Fav.
Change the favourites group. Each time you select } using
your remote, the favourites group
changes.
– Ÿ Go To
You can enter a channel number
immediately using your remote.
– R Return
Return to the previous menu.
To remove a channel from a favourites
group, follow these steps:1. Select the favourite’s group category.
2. Select a channel in the favourites
group. A c mark appears to the left
of the channel.
N You can select more than one
channel.
N If you select the selected channel
again, a c mark disappears.
3. Open the Tools menu using your
remote.
4. Select the Delete. The message Do you want to delete the selected
item(s)? appears.
5. Select OK. The message Deleted the
selected item(s). appears.
N You can delete the selected
channel from the list of favourites
group immediately by selecting b
using your remote.
Display Icons Used in the Channel screens
: An analogue channel.c: A channel selected.
: A favourite channel.
: A locked channel.
Schedule Manager
™ → Schedule Manager
Using this function, you can set
the TV to display a desired channel
automatically on a day and at a time of
your choice.
N You must set the current time first
using the Time → Clock function in the System menu to use this
function.
To use Schedule Viewing, follow these
steps:
1. On the Schedule Manager screen,
select a using your remote.
2. A pop up screen will appear. Select
Schedule Viewing.
3. Set Aerial, Channel, Repeat, and
Start Time.
● AerialSelect the desired aerial source.
● Channel
Select Channel to view the channel
numbers. Select the desired channel.
N You can only select memorised
channels.
N You can also enter the channel
number directly using the number
buttons on the remote.
● Repeat
Select Once, Manual, Sat~Sun, Mon~Fri or Everyday. If you select
Manual, you can set the day you
want.
N The c mark indicates a day you’
ve selected.
Date: You can set a desired date.
N The Date is available only when
you select Once in Repeat.
● Start Time
You can set the start time you want.
3. When done, select the OK, The selected channel is scheduled for
viewing.
N On the Schedule Manager screen,
you can view a list of Schedule
Viewing.
N If you select Information function
using your remote after highlight
an item, the Information screen
appears. On the Information
screen, you can change or cancel
the Schedule Viewing.Cancel schedule: Cancel the Schedule
Viewing.
Edit Schedule: Change the Schedule
Viewing.
Return: Return to the previous
screen.
To delete an item in a list of scheduled,
follow these steps:
1. On the Schedule Manager screen,
highlight an item you want to delete.2. Open the Tools menu using your
remote.
3. Select the Cancel schedule. The
Cancel selected list(s)? message
appears.
4. Select Yes. The selected schedule is
cancelled.
To use the Schedule Recording, follow
these steps:
for LED 4500, 5400 Series : This function is not supported.
(Digital channels only)
Allows you to make a reservation to
record a programme scheduled for
broadcast.
Set the current time first to use this
function.
1. Select Schedule Manager. The
Schedule Manager screen will be
displayed.
2. Select a using your remote. A pop up screen will appear.
3. Select the Schedule Recording.
N We recommend using a USB
HDD with at least 5,400 rpm, but
a USB HDD of RAID type is not
supported.
N More than 3TB USB HDD is not
supported.
N A USB storage device cannot
record until it completes the
Device Performance Test.N USB memory stick is not
compatible.
4. Set the Aerial, Channel, Repeat, Date,
Start / End Time.
N If you want to play a recorded
programme, refer to Recorded TV
in the e-Manual.
Channel List
Using this function, you can view the
channel list, programme information,
favourite channel, and manage of schedule viewing.
1. Press the CH LIST button. The
Channel List screen is displayed
immediately.
2. Change a channel or channel list
mode.
Using the coloured and function buttons
with the Channel List
N If you press the INFO button, the
TV displays details of the selected programme.
● a Aerial
Select the desired aerial source.
The option may differ depending on
country.
● { Programme View / Channel View
Displays the programme when digital
channel is selected. Returns to the
channel view.
● lr Ch. Mode / Channel
Move to the type of channels you want to display on the Channel List screen. /
On Programme View screen, change a
channel.
● E Watch / Information
Watches the channel you select.
/ Displays details of the selected
programme.
● k Page
Move to next or previous page.
Using the Schedule Viewing in Channel ListYou can use Schedule Viewing in
Channel List to schedule a digital
channel programme for viewing.
1. Press the CH LIST button. The
Channel List screen appears.
2. Select a desired digital channel.
3. Select { using your remote. The TV
displays the programme list of the
selected channel.
4. Select a desired programme in the
programme view, and then select Information using your remote.
5. On the Information screen, select
Schedule Viewing. The selected
programme is scheduled.
N If you want to cancel the Schedule
Viewing, follow Steps 1 through 4,
and then select Cancel schedule.
Channel Status Display Icons
: An analogue channel.
: A reserved programme.: A reserved recording programme.
: A locked channel.Memorizing Channels
Aerial
Menu → Channel → Aerial
Before your television can begin
memorizing the available channels, you
must specify the type of signal source
that is connected to the TV.
N The option may differ depending on
country.
Country
Menu → Channel → CountrySelect your country so that the TV can
correctly auto-tune the broadcasting
channels.
N The PIN input screen appears. Enter
your 4 digit PIN number.
● Digital Channel: Change the country
for digital channels.
● Analogue Channel: Change the
country for analogue channels.
Auto TuningMenu → Channel → Auto Tuning
Scans for a channel automatically and
stores in the TV.
N Automatically allocated programme
numbers may not correspond
to actual or desired programme
numbers. If a channel is locked using
the Channel Lock function, the PIN
input window appears.
● Auto Tuning: Scans for channels
automatically and stores them in the TV’s memory.
● Cable Search Option (when the aerial
was set to Cable)
(Depending on the country)
Sets additional search options such
as the frequency and symbol rate for
a cable network search.
When Aerial Source is set to Air or Cable
● Digital & Analogue / Digital / Analogue:
Select the channel source to memorise. When selecting Cable → Digital &
Analogue or Digital: Provide a value to
scan for cable channels.
● Automatic Ordering (Depending on
the country): Channels found will be
automatically ordered following a
criterion established by all the main
national and local televisions.
N Available only when the aerial source
is set to Air.
● Others Ordering (Depending on the country): If you select this menu you
will find others channels ordering
directly organized from private national
televisions.
N Available only when the aerial source
is set to Air.
● Operator Selection (Depending on the
country): Selects a provider of cable
services.
● Search Mode: If you selected the Cable,
the Search Mode screen appears. Scans for all channels with active
broadcast stations and stores them in
the TV.
N If you select Quick, you can set up
the Network, Network ID, Frequency,
Modulation, and Symbol Rate
manually by the remote control.
Network: Selects the Network ID setting
mode among Auto or Manual.
Network ID: When Network is Manual,
you can set up Network ID.Frequency: Displays the frequency for
the channel. (Differs in each country)
Modulation: Displays available
modulation values.
Symbol Rate: Displays available symbol
rates.
When Aerial Source is set to Satellite
(Depending on the country)
● Channel Type: Select the Channel Type
to memorise.● Satellite: Selects the satellite to scan.
The option may differ depending on
country.
● Scan Mode: Select a scan mode for the
selected satellite.
● Re-initialise: Selects the scanning
mode of the selected satellite.
● Search Mode: Sets search mode using
up/down buttons.
Manual TuningMenu → Channel → Manual Tuning
Scans for a channel manually and
stores in the TV.
N If a channel is locked using the
Channel Lock function, the PIN input
window appears.
N This function may not be supported
depending on the region.
When Aerial Source is set to Air or Cable
● Digital Channel Tuning: Scans for a digital channel.
1. Select the New.
N When selecting Aerial → Air:
Channel, Frequency, Bandwidth
N When selecting Aerial → Cable:
Frequency, Modulation, Symbol
Rate
2. Select the Search. When scanning
has finished, a channel is updated in
the channel list.
● Analogue Channel Tuning: Scans for a analogue channel.
1. Select the New.
2. Set the Programme, Colour System,
Sound System, Channel and Search.
3. Select the Store. When scanning has
finished, a channel is updated in the
channel list.
Channel mode
● P (programme mode): When tuning is
complete, the broadcasting stations
in your area have been assigned to position numbers from P0 to P99.
You can select a channel by entering
the position number in this mode.
● C (aerial channel mode) / S (cable
channel mode): These two modes
allow you to select a channel by
entering the assigned number for
each aerial broadcasting station or
cable channel.
When Aerial Source is set to Satellite● Transponder: Selects the transponder.
● Scan Mode: Selects either free or all
channels to store.
● Network Search: Enable / Disable
network search.
● Signal Quality: Display the current
status of broadcasting signal.
N Information on a satellite and its
transponder is subject to change
depending on the broadcasting
conditions.N When setting is completed, move to
Search. Channel scan is started.Other Features
Guide Type
Menu → Channel → Guide Type
(Depending on the country)
You can select a different type of
Guide.
● Samsung: Uses the guide programme
by provided Samsung.
● Rovi On Screen: Uses the guide
programme provided by Rovi International Solutions.
N ROVI EPG initial setting time can
take a while depending on the region
or broadcast environment.
Genre Selection for U.K
Menu → Channel → Genre Selection
Genre Selection is available when Aerial
is set to Freesat.
● Genre Selection: Turn the channelgenre selection feature on or off when using the guide.
Transfer Channel List
Menu → Channel → Transfer Channel List
Imports or exports the channel map.
You should connect USB storage to use
this function.
N The PIN input screen appears. Enter
the PIN using your remote.
● Import from USB: Import channel list
from USB.● Export to USB: Export channel list to
USB. This function is available when
USB is connected.
Fine Tune
Menu → Channel → Fine Tune
(Analogue channels only)
If the reception is clear, you do not
have to fine tune the channel, as this is
done automatically during the search
and store operation. If the signal is
weak or distorted, fine tune the channel manually. Scroll to the left or right until
the image is clear.
N Settings are applied to the channel
you’re currently watching.
N Fine tuned channels that have been
saved are marked with an asterisk “*”
on the right-hand side of the channel
number in the channel banner.
N To reset the fine-tuning, select the
Reset.Crosstalk noise reduction
Menu → Channel → Crosstalk noise
reduction
(Depending on the model)
(Analogue channels only)
This function reduces diagonal noise in
the picture caused by signal crosstalk
(interference). If your TV picture
displays diagonal noise or distortion
when you watch, turn on this function.Satellite System
Menu → Channel → Satellite System
Satellite System is available when
Aerial is set to Satellite. Before running
Auto Store, set Satellite System. Then
channel scan is run normally.
N The PIN input screen appears. Enter
your 4 digit PIN number.
● Satellite Selection: You can choose the
satellites for this TV.
● LNB Power: Enables or disables the power supply for the LNB.
● LNB Settings: Configures the outdoor
equipment.
Satellite: Selects the satellite for
receiving digital broadcasts.
Transponder: Selects a transponder
from the list or adds a new transponder.
DiSEqC Mode: Selects DiSEqC mode
for the selected LNB.
Lower LNB Oscillators: Sets the LNB
oscillators to a lower frequency.Upper LNB Oscillators: Sets the LNB
oscillators to a higher frequency.
Tone 22 kHz: Selects the Tone 22 kHz
depending on the LNB type. For a
universal LNB it should be Auto.
Signal Quality: Display the current
status of broadcasting signal.
● SatCR/Unicable Settings: Configure
single cable installation.
N This function may not support
depending on the region.SatCR/Unicable: Enables or disable
single cable installation support.
Slot Number: Select the SatCR user slot
number for this receiver.
Slot Frequency: Enter the appropriate
frequency to receive the signal from
SatCR.
Detect Slot Frequency: Auto-detect the
signal frequency for the selected slot
number.
Verify Slot Frequency: Verify that the frequency entered corresponds to the
selected slot.
● Positioner Settings: Configures the
aerial positioner.
Positioner: Enables or disables the
positioned control.
Positioner Type: Sets the positioned
type between DiSEqC 1.2 and USALS
(Universal Satellite Automatic Location
System).
– My Longitude: Sets the longitude for my location.
– My Latitude: Sets the latitude for my
location.
– Satellite Longitude Settings: Sets the
longitude of user defined satellites.
User Mode: Sets the position of satellite
aerial according to each satellite.
If you store the current position of
satellite aerial according to a certain
satellite, when the signal of that
satellite is needed, the satellite aerial can be moved to pre-populated
position.
– Satellite: Selects the satellite to set
the position for.
– Transponder: Selects a transponder
from the list for signal reception.
– Moving Mode: Selects the movement
mode between discrete and
continuous movement.
– Step Size: Adjusts the step size
degrees for the aerial rotation. Step Size is available when Moving Mode
is set to Step.
– Go To Stored Position: Rotates the
aerial to the stored satellite position.
– Aerial Position: Adjusts and stores
the aerial position for the selected
satellite.
– Store Current Position: Stores current
position as the selected positioner
limit.
– Signal Quality: Display the current status of broadcasting signal.
Installer Mode: Sets limits to the scope
of movement of satellite aerial or reset
the position. Generally, installation
guide uses this function.
– Limit Position: Selects the direction
of the positioner Limit.
– Aerial Position: Adjusts and stores
the aerial position for the selected
satellite.
– Store Current Position: Stores the current position as the selected
positioner Limit.
– Go To Zero: Moves the aerial to the
reference position.
– Reset Positioner Limit: Allows the
aerial to rotate over the full arc.
● Reset All Settings: All satellite settings
will be reset to the initial values.Changing the Preset Picture Mode
Picture Mode
Menu → Picture → Picture Mode
Picture modes apply preset adjustments
to the picture.
N When your TV is connected to a PC
via an HDMI to DVI cable, you can
only select Entertain and Standard.
● Dynamic
Suitable for a bright room.
Basic Feature● Standard
Suitable for a normal environment.
● Natural for LED TV / Relax for PDP 6500
Series
Suitable for reducing eye strain.
● Movie
Suitable for watching movies in a dark
room.
● Entertain
Suitable for watching movies and
games.N Only available when the TV is
connected to a PC via an HDMI to
DVI and an HDMI to HDMI cables.
Samsung MagicAngle for LED 5400 Series
Menu → Picture → Samsung MagicAngle
Adjust screen viewing Angle to
optimize screen quality according to
your viewing position.
● Samsung MagicAngle: When viewing
the screen at an angle from below or above by setting the appropriate mode
for each position you can obtain a
similar picture quality as viewing the
screen directly from the front.
– Off: Select when viewing from the
front position.
– Lean Back Mode: Select when
viewing from a slightly lower
position.
– Standing Mode: Select when viewing
from the upper position.● Mode: Adjust screen viewing angle.
N When Samsung MagicAngle is set to
Lean Back Mode or Standing Mode,
Gamma is not available.Adjusting Picture Settings
Backlight for LED TV / Cell Light for PDP TV
Menu → Picture → Backlight / Cell Light
Adjusts the pixel brightness. 20 is the
brightest setting.
Contrast
Menu → Picture → Contrast
Adjusts contrast level. Values closer to
100 mean bigger light/dark contrast.Brightness
Menu → Picture → Brightness
Adjusts brightness level. Values closer
to 100 mean brighter screen.
Sharpness
Menu → Picture → Sharpness
Adjusts sharpness of picture. Values
closer to 100 mean a sharp image.
Colour
Menu → Picture → ColourAdjusts colour saturation level. Values
closer to 100 mean more intense
colours.
Tint (G/R)
Menu → Picture → Tint (G/R)
Adjusts tint levels for green and red.
Values closer to 100 mean greater
intensity for that colour.
To adjust picture quality, follow these steps:1. Select an option you want to adjust.
When you select an option, a slider
screen appears.
2. Adjust the option value using your
remote.
N When you change an option value,
the change will affect the OSD menu
also.
N When your TV is connected to a PC
via an HDMI to DVI cable, Colour and
Tint (G/R) is not available.N You can adjust and store settings for
each external device connected to
the TV.
N Lowering picture brightness reduces
power consumption.Changing the Picture Size
Screen Adjustment
Menu → Picture → Screen Adjustment
Using this function, you can select
various picture size and aspect ratio
options.
● Picture Size
Your cable box / satellite receiver may
have its own set of screen sizes as
well. However, we highly recommend you use 16:9 mode most of the time.
Auto Wide: Automatically adjusts the
picture size to the 16:9 aspect ratios.
16:9: Adjusts the picture size to 16:9 for
DVDs or wide broadcasting.
Wide Zoom: Magnifies the picture size
more than 4:3.
Zoom: Magnifies the 16:9 wide pictures
vertically to fit the screen size.
4:3: The default setting for a movie or
normal broadcasting.N Do not watch in 4:3 format for a long
time. Traces of borders displayed
on the left, right and centre of the
screen may cause image retention
(screen burn) which is not covered
by the warranty.
Screen Fit: Displays the full image
without any cut-off when HDMI (720p
/ 1080i / 1080p), DTV (1080i, 1080p) or
Component (1080i / 1080p) signals are
inputted.Smart View 1: Reduces the 16:9 picture
by 50% for LED 5300, LED 5500 series and
above
Smart View 2: Reduces the 16:9 picture
by 25% for LED 5300, LED 5500 series and
above
N Smart View 1 is enabled only in
HDMI mode.
N Smart View 2 is enabled only in
HDMI or DTV mode.
N The picture size can vary when you play content from Videos in AllShare
Play.
● Zoom/position
Adjusts the picture zoom and position.
Zoom is only available if Picture Size is
set to Zoom. Position is only available
if Picture Size is set to Wide Zoom,
Zoom, or Screen Fit.
To use the Zoom function after
selecting Zoom, follow these steps:1. Select Zoom.
2. On the Zoom/position screen, select
Zoom, and then zoom in or zoom out
using your remote.
3. When done, select Zoom again, and
then select Close.
4. To reset the picture, press Reset.
To use the Position function after
selecting Wide Zoom, Zoom or Screen
Fit, follow these steps:1. Select the Position.
2. On the Position screen, select
Position, and then move the picture
to position you want using your
remote.
3. When done, select Position again,
and then select Close.
4. To reset the picture position, select
Reset.
Picture Sizes available by Input Source:– ATV, EXT, AV: Auto Wide, 16:9, Wide
Zoom, Zoom, 4:3
– DTV (576i, 576p, 720p): Auto Wide,
16:9, Wide Zoom, Zoom, 4:3, Smart
View 2 for LED 5300, LED 5500 series and
above
– DTV(1080i, 1080p) : Auto Wide, 16:9,
Wide Zoom, Zoom, 4:3, Screen Fit,
Smart View 2 for LED 5300, LED 5500
series and above
– Component (480i, 480p, 576i, 576p, 720p): 16:9, Wide Zoom, Zoom, 4:3
– Component (1080i, 1080p): 16:9,
Wide Zoom, Zoom, 4:3, Screen Fit
– HDMI (480i, 480p, 576i, 576p): 16:9,
Wide Zoom, Zoom, 4:3, Smart View
1 for LED 5300, LED 5500 series and above
Smart View 2 for LED 5300, LED 5500
series and above
– HDMI (720p, 1080i, 1080p): 16:9,
Wide Zoom, Zoom, 4:3, Screen Fit,
Smart View 1 for LED 5300, LED 5500 series and above Smart View 2 for LED
5300, LED 5500 series and above
N Depending on the input source, the
picture size options may vary.
N The available items may differ
depending on the selected mode.
N HD (High Definition): 16:9 -
1080i/1080p (1920x1080), 720p
(1280x720)
N You can adjust and store settings
for each external device you have connected to an input on the TV.
Select the Source, and then adjust
the settings.
● 4:3 Screen Size
Available only when picture size is set
to Auto Wide. You can determine the
desired picture size at the 4:3 WSS
(Wide Screen Service) size or the
original size. Each European country
requires different picture size.
N Not available in Component or HDMI mode.
● PC Screen Adjustment for LED 5400 Series
N Available in PC mode only.
– Coarse / Fine: Removes or reduces
picture noise. If the noise is not
removed by Fine-tuning alone,
use the Coarse function to adjust
the frequency as best as possible
(Coarse) and Fine-tune again. After
the noise has been reduced, readjust the picture so that it is aligned with the centre of screen.
– Position: Adjust the PC’s screen
position using your remote if it is not
centred or does not fit the product
screen.
– Image Reset: Resets the image to the
default settings.
Auto Adjustment for LED 5400 Series
Menu → Picture → Auto Adjustment
Automatically adjusts the picture's frequency, position, and fine tune
settings in the PC mode.
N Available in PC mode only.
N Not available if you connect your
PC with an HDMI or an HDMI to DVI
cable.Changing the Picture Options
Advanced Settings
Menu → Picture → Advanced Settings
Using this function, you can configure
advanced picture settings to create
your preferred picture.
N Advanced Settings is available only
when the Picture Mode is set to
Standard or Movie mode.
N When connecting a PC using an
HDMI-DVI cable, you can only make changes to White Balance and
Gamma.
● Dynamic Contrast
Adjusts the screen contrast.
● Black Tone
Select the black level to adjust the
screen depth.
● Flesh Tone
Emphasizes pink “Flesh Tone.”
● RGB Only Mode
Displays the Red, Green and Bluecolours so you can make fine
adjustments to hue and saturation.
● Colour Space
Adjusts the range and variety of colours
(the colour space) available to create
images.
N for LED 6100 - 7200 Series and PDP 6500
Series To adjust Colour, Red, Green,
Blue and Reset, set the Colour Space
to Custom.
● White BalanceAdjusts the colour temperature for a
more natural picture.
R-Offset / G-Offset / B-Offset:
Adjusts each colour’s (red, green, blue)
darkness.
R-Gain / G-Gain / B-Gain: Adjusts each
colour’s (red, green, blue) brightness.
Reset: Resets the White Balance to its
default settings.
● 10p White Balance
for LED 4500 - 5700 Series and PDP 550 - 570 Series : This function is not supported.
Lets you control the white balance
by adjusting the red, green, and blue
brightness in 10 point intervals.
N Available when the Picture Mode is
set to Movie. Available for all video
source.
N Some external devices may not
support this function.
Interval: Select the interval to adjust.
Red: Adjusts the red level.Green: Adjusts the green level.
Blue: Adjusts the blue level.
Reset: Resets the 10p White Balance to
its default settings.
● Gamma
Adjusts the primary colour intensity.
● Expert Pattern
for LED 4500 - 5700 Series and PDP 550 - 570
Series : This function is not supported.
Use the Expert Pattern function to
calibrate the picture. If the OSD menu disappears or a menu other than the
Picture menu is opened, the TV saves
the calibration and the Expert Pattern
screen disappears.
Off: Turns the Expert Pattern function
off.
Pattern1: This test screen demonstrates
the effect of your display settings on
shades of grey and black.
Pattern2: This test screen demonstrates
the effect of your display settings on colours.
N After selecting Pattern1 or Pattern2,
you can adjust any of the advanced
settings for the desired effect.
N While the Expert Pattern is running,
the TV does not output sound.
N Only enabled in DTV, Component,
and HDMI modes.
● xvYCC
for LED 4500 - 5700 Series and PDP 550 - 570
Series : This function is not supported.Setting xvYCC on increases picture
detail and enlarges the colour space
when you are watching movies input
from an external device (e.g. BD/DVD
player) connected to the TV’s HDMI or
Component IN jacks.
N Available only when you set
the Picture Mode to Movie and
the external input to HDMI or
Component.
N Some external devices may not support this function.
● Motion Lighting
Reduces power consumption by
reducing screen brightness when the
picture on the screen is in motion.
N This feature is not supported in 3D
mode.
N Only available in Standard mode.
N When you change the Backlight
for LED TV / Cell Light for PDP TV ,
Contrast, or Brightness, the TV sets Motion Lighting to Off.
Picture Options
Menu → Picture → Picture Options
Using this function, you can configure
additional picture settings to suit your
preference.
N When your TV is connected to a PC
via an HDMI to DVI cable, you can
only make changes to Colour Tone.
● Colour ToneSelect the colour temperature.
N Warm1 or Warm2 will be deactivated
when the Picture Mode is set to
Dynamic.
N You can adjust and store settings for
each external device connected to an
input on the TV. Select Source and
then adjust the settings.
● Digital Noise Filter
If the broadcast signal received by your
TV is weak, you can activate the Digital Noise Filter feature to reduce any static
and ghosting that may appear on the
screen.
Auto Visualisation: When changing
analogue channels, displays signal
strength.
N When the signal is weak, try all the
options until the TV displays the best
picture.
N Only available for analogue channels.
N When the bar is green, you are receiving the best possible signal.
● MPEG Noise Filter
Reduces MPEG noise to provide
improved picture quality.
● HDMI Black Level
Lets you adjust the screen depth by
selecting a black level.
N Available only in HDMI mode.
● Film Mode
Sets the TV so that it senses and then
processes film signals from all sources automatically and adjusts the picture
for optimum quality.
N Available in TV, AV, Component (480i
/ 1080i) and HDMI (1080i).
● Motion Plus for LED TV
for LED 5400 - 5500 Series : This function is
not supported.
Removes drag from fast scenes with
a lot of movement to provide a clearer
picture.
N The Info screen on your TV displays the resolution and frequency of the
incoming signal (60Hz), but not the
frequency the TV is generating for
the image it is displaying by using
Motion Plus function.
N If noise occurs on the screen, please
set up the Motion Plus to Off. If
Motion Plus is Custom, you can
set up the Blur Reduction, Judder
Reduction or Reset manually.
N If Motion Plus is Demo, you can compare the difference of on and off
modes.
Blur Reduction: Adjusts the blur
reduction level from video sources.
Judder Reduction: Adjusts the judder
reduction level from video sources
when playing films.
Reset: Reset the custom settings to the
factory defaults.
● LED Motion Plus for LED TV
for LED 4500, 5400 Series : This function is not supported.
Removes drag from fast scenes with
a lot of movement to provide a clear
picture.
Reset Picture
Menu → Picture → Reset Picture
Resets your current picture mode to its
default settings.Using the TV with Your PC
Using Your TV as a Computer (PC)
Display
Entering the Video Settings (Based on
Windows 7)
For your TV to work properly as a
computer display, you must enter the
correct video settings after you have
connected the TV to your PC.
N Depending on your version of Windows and your video card, the
procedure on your PC will probably
differ slightly from the procedure
presented here.
N However, the same basic information
will apply in most cases. (If not,
contact your computer manufacturer
or Samsung Dealer.)
1. Click “Control Panel” on the
Windows start menu.
2. Click “Appearance and Themes” in the “Control Panel” window. A
display dialog box appears.
3. Click “Display”. Another display
dialog box appears.
4. Click the “Settings” tab on the
display dialog box.
– On the Settings tab, set the
correct resolution (screen size).
The optimal resolution for this TV
is 1920 x 1080.
– If a vertical-frequency option exists on your display settings
dialog box, select “60” or “60 Hz”.
Otherwise, just click “OK” and exit
the dialog box.Changing the Preset Sound Mode
Sound Mode
Menu → Sound → Sound Mode
Sound modes apply preset adjustments
to the sound.
N If Speaker Select is set to External
Speaker, Sound Mode is disabled.
● Standard
Selects the normal sound mode.
● Music
Emphasizes music over voices.● Movie
Provides the best sound for movies.
● Clear Voice
Emphasizes voices over other sounds.
● Amplify
Increase the intensity of high-frequency
sound to allow a better listening
experience for the hearing impaired.Adjusting Sound Settings
Sound Effect
Menu → Sound → Sound Effect
N If Speaker Select is set to External
Speaker, Sound Effect is disabled.
N Available only when the Sound Mode
is set to Standard.
● SRS TruSurround HD
This function provides a virtual 5.1
channel surround sound experience through a pair of speakers using HRTF
(Head Related Transfer Function)
technology.
● SRS TruDialog
This function allows you to increase
the intensity of voices over background
music or sound effects so that dialog
can be heard more clearly.
● Equaliser
The Equaliser displays a series of
sliders. Use the arrow buttons to select a slider, and then change the slider’s
value. To Reset the Equaliser, select
Reset. A pop-up appears asking if you
want to reset. Select Yes. To exit, select
Close.
Balance L/R: Adjusts the balance
between the left and right speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz
(Bandwidth Adjustment): Adjusts the
volume level of specific bandwidth
frequencies.Reset: Resets the equalizer to its default
settings.
Broadcast Audio Options
Menu → Sound → Broadcast Audio Options
● Audio Language
(Digital channels only)
Change the default value for audio
languages.
N The available language may differ
depending on the broadcast.● Audio Format
(Digital channels only)
When sound is emitted from both the
main speaker and the audio receiver,
a sound echo may occur due to the
decoding speed difference between the
main speaker and the audio receiver. In
this case, use the TV Speaker function.
N Audio Format option may differ
depending on the broadcast. 5.1ch
Dolby digital sound is only available when connecting an external speaker
through an optical cable.
● Audio Description
(Not available in all locations) (Digital
channels only)
This function handles the Audio Stream
for the AD (Audio Description) which
is sent along with the Main audio from
the broadcaster.
N Audio Description (Off / On): Turn
the audio description function on or off.
N Volume: Adjust the audio description
volume.
Additional Settings
Menu → Sound → Additional Settings
● DTV Audio Level
(Digital channels only)
This function allows you to reduce the
disparity of a voice signal (which is one
of the signals received during a digital TV broadcast) to a desired level.
N According to the type of broadcast
signal, MPEG / HE-AAC can be
adjusted between -10dB and 0dB.
N To increase or decrease the volume,
adjust between the range 0 and -10
respectively.
● SPDIF Output
SPDIF (Sony Philips Digital InterFace) is
used to provide digital sound, reducing
interference going to speakers and various digital devices such as a DVD
player.
● Audio Format: You can select the
Digital Audio output (SPDIF) format.
N The available Digital Audio output
(SPDIF) format may differ depending
on the input source.
● Audio Delay
Lets you correct timing mismatches
between the audio track and the video
when you are watching the TV and listening to digital audio output from
the TV through an external device such
as an AV receiver. When you select the
Audio Delay function, a slider screen
appears. Adjust the option value using
your remote (0ms ~ 250ms).
● Dolby Digital Comp
This function minimizes signal disparity
between a dolby digital signal and a
voice signal (i.e. MPEG Audio, HE-AAC,
ATV Sound).N Select Line to obtain dynamic sound,
and RF to reduce the difference
between loud and soft sounds at
night time.
Line: Set the output level for signals
greater or less than -31dB (reference)
to either -20dB or -31dB.
RF: Set the output level for signals
greater or less than -20dB (reference)
to either -10dB or -20dB.Speaker Settings
Menu → Sound → Speaker Settings
● Speaker Select
If you are listening to the sound track
of a broadcast or movie through an
external receiver, you may hear a
sound echo caused by the difference
in decoding speed between the TV’s
speakers and the speakers attached to
your audio receiver. If this occurs, set
the TV to External Speaker.N When Speaker Select is set to
External Speaker, the TV’s speakers
are turned off. You will hear sound
through the external speakers only.
When the Speaker Select is set to TV
Speaker, both the TV’s speakers and
the external speakers are on. You
will hear sound through both.
N When the Speaker Select is set to
External Speaker, the volume buttons
and mute functions will not operate and the sound settings will be
limited.
N If there is no video signal, both
the TV’s speakers and the external
speakers will be mute.
● Auto Volume
Normal: Automatically equalizes the
volume level when switching to another
channel.
Night: Automatically equalizes and
decrease the volume level on each channel, so each channel is quieter.
Night is useful at night, when you may
want to keep the volume low.
N To use the volume control of a
connected source device, set Auto
Volume to Off. If Auto Volume is
set to Normal or Night, adjusting
the volume control of a connected
source device may have to effect.
Reset SoundMenu → Sound → Reset Sound
Reset all sound settings to the factory
defaults.Connecting to the Network
The Wired Network Connection
There are three ways to attach your TV
to your LAN using cable:
N For illustrations of the three kinds of
wired network connections, see your
paper user's manual.
– You can attach your TV to your
LAN by connecting the LAN port on
the back of your TV to an external
Preference Featuresmodem using a LAN cable.
– You can attach your TV to your LAN
by connecting the LAN port on the
back of your TV to a router which
is connected to an external modem.
Use LAN cable for the connection.
– You may be able to attach your TV
to your LAN by connecting the LAN
port on the back of your TV directly
to a network wall outlet using a
LAN cable. Note that the wall outlet is attached to a modem or router
elsewhere in your house.
N If your network requires a Dynamic
IP address, you should use an ADSL
modem or router that supports the
Dynamic Host Configuration Protocol
(DHCP). Modems and routers that
support DHCP automatically provide
the IP address, subnet mask,
gateway, and DNS values your TV
needs to access the Internet so you do not have to enter them manually.
Most home networks use a Dynamic
IP address.
N Some networks require a Static IP
address. If your network requires a
Static IP address, you must enter the
IP address, subnet mask, gateway,
and DNS values manually when you
set up the network connection. To
get the IP address, subnet mask,
gateway, and DNS values, contact your Internet Service Provider (ISP). If
you have a Windows computer, you
can also get these values through
your computer.
N You can use ADSL modems that
support DHCP if your network
requires a Static IP address. ADSL
modems that support DHCP also let
you use Static IP addresses.
The Wireless Network ConnectionN For an illustration of the wireless
network connection, see your paper
user's manual.
N for LED 5500 - 5700 Series and PDP 550
- 570 Series To connect your TV to
your network wireless, you need
a wireless router or modem and
a Samsung Wireless LAN adapter
(WIS10ABGN or WIS12ABGNX),
which you connect to your TV’s USB
port. Samsung Wireless LAN adapter is sold separately and is offered by
selected retailers, Ecommerce sites
and Samsungparts.com.
You can connect your TV to your LAN
through a standard wireless router or
modem.
This TV supports the IEEE 802.11a/b/g
and n communication protocols.
Samsung recommends using IEEE
802.11n. When you play video over a
network connection using IEEE 802.11 a/b or g, the video may not play
smoothly.
N for LED 5500 - 5700 Series and PDP 550 -
570 Series The Samsung Wireless LAN
Adapter and the USB extension Cable
are sold separately and are offered
by select retailers, Ecommerce sites
and Samsungparts.com.
N for LED 5500 - 5700 Series and PDP 550 -
570 Series Ensure the TV is turned on
before you connect the Samsung Wireless LAN adapter.
N for LED 5500 - 5700 Series and PDP 550 -
570 Series The Samsung Wireless LAN
adapter may not be recognized when
using a connection via a USB hub or
via a USB extension cable other than
the cable supplied.
N To use a wireless network, your TV
must be connected to a wireless
router or modem. If the wireless
router or modem supports DHCP, your TV can use a DHCP or static IP
address to connect to the wireless
network.
N Select a channel on the wireless
router or modem that is not currently
being used. If the channel set for the
wireless router or modem is currently
being used by another device nearby,
this will result in interference and
communication failure.
N Your TV supports only the following wireless network security protocols:
– Authentication Mode : WEP,
WPAPSK, WPA2PSK
– Encryption Type : WEP, TKIP, AES
N If you select the Pure Highthroughput (Greenfield) 802.11n
mode and the Encryption type is set
to WEP or TKIP on your AP (access
point) or wireless router, Samsung
TVs will not support a connection
in compliance with new Wi-Fi certification specifications.
N If your wireless router or modem
supports WPS (Wi-Fi Protected
Setup), you can connect to the
network via PBC (Push Button
Configuration) or a PIN (Personal
Identification Number). WPS will
automatically configure the SSID and
WPA key in either mode.
N If your router, modem, or device is
not certified, it may not connect to the TV.
N Connection Methods: You can set up
the wireless network connection in
four ways:
– Using Auto Setup (with the Auto
Network Search function)
– Using Manual Setup
– Using WPS(PBC)
– Using Plug & Access
Notice for LED 5500 - 5700 Series and PDP 550 - 570 Series
The picture may appear corrupted or
have static for some channels when
the TV is connected to the Samsung
Wireless LAN adapter. If this occurs,
establish a connection using one of
the following methods or connect the
Samsung Wireless LAN adapter using
a USB cable in a place that is not
affected by radio interference.
● Method 1: Connecting the Samsung Wireless LAN adapter using the USB
right angle adapter.
To connect the Samsung Wireless
LAN adapter using the USB right angle
adapter, follow these steps:
1. Connect the USB right angle adapter
to the Samsung Wireless LAN
adapter.
2. Connect the other end of the right
angle adapter to the USB port.● Method 2: Connecting the Samsung
Wireless LAN adapter via an extension
cable.
To connect the Samsung Wireless LAN
adapter using the extension cable,
follow these steps:
1. Connect the extension cable to the
USB port.
2. Connect the extension cable and
Samsung Wireless LAN adapter.3. Attach the Samsung Wireless LAN
adapter to the back of the TV near
the top, using double-sided adhesive
tape.Setting up a Wired Network
Network Settings
Menu → Network → Network Settings
Set up the wired or wireless network
connection so you can use various
Internet services such as Smart
Hub and AllShare Play and perform
software upgrades.
Automatic Wired Network Setup
You can configure your TV's wired network connection automatically when
connecting your TV to a network that
supports DHCP.
N If you have connected a LAN cable,
the wired network set up screen
appears automatically.
To set up your TV’s wired network
connection automatically, follow these
steps:
1. Go to the Network Settings screen. (Network → Network Settings)
2. Select Start. The network test screen
appears and verifies the network
connection.
3. When the connection has been
verified, the "You are connected
to the Internet. If you have any
problems using online services,
please contact your Internet service
provider." message appears. Select
OK.N If the connection process fails, check
the LAN port connection.
N If the automatic process cannot find
the network connection values or
if you want to set the connection
manually, go to the next section,
"Manual Network Setup."
Manual Wired Network Setup
You can configure your TV's wired
network connection manually when
connecting your TV to a network that requires a Static IP address.
Getting the Network Connection Values
To view the Network connection values
on Winows XP computers, follow these
steps:
1. Right click the Network icon on the
bottom right of the screen.
2. In the pop-up menu that appears,
click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details
button. The Network connection
values are displayed.
To set up your TV's wired network
connection manually, follow these
steps:
1. Go to the Network Settings screen.
(Network → Network Settings)
2. Select Start. The network connection screen appears and the verification
process starts.
3. Select Stop. The verification process
stops. Select IP Settings on network
connection screen. The IP Settings
screen appears.
4. Select the IP Mode, and then set the
IP Mode to Manual.
5. Go to the IP Address entry field, and
then select the IP Address using the
remote.6. Enter the first portion of the IP
Address (for example, 105) into the
first entry field using your remote.
When done, go to the next field.
7. Enter the next portion of the IP
Address. When done, go to the next
field.
8. Repeat the entry process for each
field in the IP Address.
N If you make a mistake when
entering a number, re-enter the number to correct it.
9. When done, go to the Subnet Mask
fields.
10.Repeat the same entry process for
Subnet Mask, Gateway, and DNS
Server.
11.When done, select OK. The network
test screen appears and the
verification process starts. When the
connection has been verified, the
"You are connected to the Internet. If you have any problems using online
services, please contact your Internet
service provider." message appears.
Select OK.
Network Status
Menu → Network → Network Status
You can check the current network and
Internet status.
If the wired network connection failed...● No network cable found.
Check if your network cable is plugged
in. If it is connected, make sure that
the router is turned on. If it is on, try
turning if off and on again.
● IP auto setting failed.
Try the following to set your IP address
automatically or set your IP address
manually by selecting IP Settings.
1) Ensure that DHCP server is enabled
on the router. 2) Unplug and re-plug-in the router. 3) Contact your Internet
Service Provider for more information
● Unable to connect to the network.
Try the following: check if your IP
address is set correctly in IP Settings.
Contact your Internet Service Provider
for more information.
● Connected to your local network, but
cannot connect to the Internet.
Check the DNS settings in IP Settings
or contact your Internet Service Provider to access the Internet.
● Network setup complete, but cannot
connect to the Internet.
Contact your Internet Service Provider
to access the Internet.Setting up the Wireless Network
Network Settings
Menu → Network → Network Settings
Set up the wired or wireless network
connection so you can use various
Internet services such as Smart
Hub and AllShare Play and perform
software upgrades.
Automatic Wireless Network Setup
Most wireless networks have an optional security system that requires
devices that access the network to
transmit an encrypted security code
called an Access or Security Key. The
Security Key is based on a Pass Phrase,
typically a word or a series of letters
and numbers of a specified length
you were asked to enter when you set
up wireless security for your wireless
network.
If you use this method of setting up the network connection, and have a
Security Key for your wireless network,
you will have to enter the Pass Phrase
during the automatic or manual setup
process.
N Depending on your router or modem,
you may be able to use a WPS PIN
instead.
To set up your TV’s wireless network
connection automatically, follow these steps:
1. Go to the Network Settings screen.
(Network → Network Settings)
2. Select Start. The network function
searches for available wireless
networks. When done, it displays a
list of the available networks.
3. In the list of networks, select a
network you want to connect to and
then select Next.
N If the wireless router is set to Hidden (Invisible), you have to
select Add Network and enter
the correct Network Name (SSID)
and Security Key to establish the
connection.
4. If the Enter security key screen
appears, go to step 5. If you selected
a wireless router that does not have
wireless security, go to step 7.
5. To set wireless security for the router,
enter the Security Key (Security key or PIN).
N You can enter the Security Key
(Security key or PIN) using
a keyboard screen. Enter the
Security Key using your remote.
N A keyboard can be used to
enter the security key via a USB
or Bluetooth connection. The
Bluetooth feature might not be
available depending on model.
N You should be able to find the Pass Phrase on one of the set up
screens you used to set up your
router or modem.
6. When done, select Next. The network
connection screen appears and the
verification process starts.
7. When the connection has been
verified, the You are connected to the
Internet. If you have any problems
using online services, please contact
your Internet service provider.message appears.
N If the network does not accept the
Security Key or PIN, select Retry
or select IP Settings to enter the
settings manually.
N If you want to set up the connection
manually, select IP Settings. Then, go
to the next section, “Manual Network
Setup”.
Manual Wireless Network Setup
You can configure your TV's wireless network connection manually when
connecting your TV to a network that
requires a Static IP address or if the
automatic connection process has
failed.
Getting the Network Connection Values
To view the Network connection values
on most Windows computers, follow
these steps:
1. Right click the Network icon on the bottom right of the screen.
2. In the pop-up menu that appears,
click Status.
3. On the dialog that appears, click the
Support tab.
4. On the Support Tab, click the Details
button. The Network connection
values are displayed.
To set up your TV's wireless network
connection manually, follow these steps:
1. Go to the Network Settings screen.
(Network → Network Settings)
2. Select Start. The network function
searches for available wireless
networks. When done, it displays a
list of the available networks.
3. In the list of networks, select a
network you want to connect to and
then select Next.
N If the wireless router is set to Hidden (Invisible), you have to
select Add Network and enter
the correct Network Name (SSID)
and Security Key to establish the
connection.
4. If the Enter security key screen
appears, go to step 5. If you select
a wireless router that does not have
wireless security, go to step 7.
5. To set wireless security for the router,
enter the Security Key (Security key or PIN).
N You can enter the Security Key
(Security key or PIN) using
a keyboard screen. Enter the
Security Key using your remote.
N You should be able to find the
Pass Phrase on one of the set up
screens you used to set up your
router or modem.
6. When done, select Next. The network
connection screen appears and the verification process starts.
7. Select Stop. The verification process
stops. Select IP Settings on the
network connection screen. The IP
Settings screen appears.
8. Select IP Mode, and then set the IP
Mode to Manual.
9. Go to the IP Address entry field, and
then select the IP Address using the
remote.
10.Enter the first portion of the IP Address (for example, 105) into the
first entry field using your remote.
When done, go to the next field.
11.Enter the next portion of the IP
Address. When done, go to the next
field.
12.Repeat the entry process for each
field in the IP Address.
N If you make a mistake when
entering a number, re-enter the
number to correct it.13.When done, go to the Subnet Mask
fields.
14.Repeat the same entry process for
Subnet Mask, Gateway, and DNS
Server.
15.When done, select OK. The network
connection screen appears and the
verification process starts. When the
connection has been verified, the
"You are connected to the Internet. If
you have any problems using online services, please contact your Internet
service provider." message appears.
WPS(PBC) Network Setup
If your router has a WPS(PBC)
button, you can configure your TV's
wireless network connection using the
WPS(PBC) button quickly and easily.
To set up your TV's wireless network
connection using WPS(PBC), follow these steps:
1. Go to Network Settings screen.
(Network → Network Settings)
2. Select Start. The network function
searches for available wireless
networks. When done, it displays a
list of the available networks.
3. Select the WPS(PBC).
4. Press the WPS(PBC) button on your
router within 2 minutes. Your TV
automatically acquires all the network setting values it needs and connects
to your network.
5. The network connection screen
appears, and network setup is done.
Plug & Access Network Setup
The Plug & Access function lets you
easily connect your Samsung TV to
your Samsung wireless router (sold
separately) by using a USB memory
stick to transfer the setup information from the router to the TV. If your
non-Samsung wireless router does
not support Plug & Access, you
must connect using one of the other
methods.
N You can check for equipment that
supports Plug & Access on www.
samsung.com.
To set up your TV's wireless network
connection using Plug & Access, follow these steps:
1. Turn on the Samsung wireless router
and your TV.
2. Insert a USB memory stick into the
USB port in your Samsung wireless
router. Check the router’s LED’s to
make sure it is on (Blinking → on).
3. Take the USB memory stick out of
the router, and then insert it into
a USB port on your Samsung TV.
The memory stick downloads the connection information.
4. Wait until the connection is
automatically established.
N If Plug & Access does not connect
your TV to your wireless router,
a popup screen appears on the
screen notifying you of the failure.
If you want to try using Plug &
Access again, disconnect the USB
memory stick, reset the router, and
then try again from Step 1. You can also choose one of the other
connection setup methods.
5. The network connection screen
appears, and the network setup is
done.
N If the wireless router’s settings
change or you install a new wireless
router, you must perform the Plug &
Access procedure again, beginning
from Step 1.Network Status
Menu → Network → Network Status
You can check the current network and
Internet status.
If the wireless network connection failed...
● Wireless network connection failed.
No wireless router selected. Go to
Network Settings to select your router.
● Unable to connect to wireless router.
Try the following: check if the router is turned on, and if it is, try turning it
off and on again. Check if you need to
enter a security key to use the router.
● IP auto setting failed.
Try the following to set your IP address
automatically or set your IP address
manually by selecting IP Settings.
1) Ensure that DHCP server is enabled
on the router. 2) Unplug and re-plugin the router. 3) Contact your Internet
Service Provider for more information.● Unable to connect to the network.
Try the following: check if your IP
address is set correctly in IP Settings.
Contact your Internet Service Provider
for more information.
● Connected to your local network, but
cannot connect to the Internet.
Check the DNS settings in IP Settings,
or contact your Internet Service
Provider to access the Internet.
● Network setup complete, but cannot connect to the Internet.
Contact your Internet Service Provider
to access the Internet.Managing the Network Connected Devices
Wi-Fi Direct
Menu → Network → Wi-Fi Direct
Set to connect the TV to wireless
mobile devices. Using this function, you
can connect wireless mobile devices to
your TV directly without a router.
N To use this function, your mobile
device should be supported by the
Wi-Fi Direct.N for LED 5500 - 5700 Series and PDP 550 - 570
Series You can use this function when
connecting the Samsung Wireless
LAN Adapter. (May not be available,
depending on your model.)
To connect your mobile device with
your TV using Wi-Fi Direct, follow
these steps:
1. Turn on the Wi-Fi Direct device and
activate its Wi-Fi Direct function.2. Go to the Wi-Fi Direct screen.
(Network → Wi-Fi Direct) The TV
starts to search devices and then
displays the devices on the Wi-Fi
Direct screen.
3. Turn on the Wi-Fi Direct function on
your device. Select the desired Wi-Fi
device.
– For PBC: Press the WPS(PBC)
button on your Wi-Fi device
within 2 minutes. The Connecting popup appears, followed by
the Connected pop-up. When it
closes, you should see the device
listed on the Wi-Fi Direct screen
as connected.
– For PIN: Input the displayed PIN
on your device. The Connecting
popup appears, followed by
the Connected pop-up. When it
closes, you should see the device
listed on the Wi-Fi Direct screen as connected.
N If you want to disconnect the device,
select the connected Wi-Fi device,
and then select Disconnect.
N The TV and BD products perform the
role of the Group Owner. If a TV or
BD is connected via Wi-Fi Direct, the
connected device is represented as a
Group Owner in the Wi-Fi Direct list.
However, even in this case, the TV
cannot connect to another TV or BD through Wi-Fi Direct.
Soft AP
Menu → Network → Soft AP
Using this function, you can connect
the TV to your mobile devices if your
mobile devices do not support Wi-Fi
Direct.
The Soft AP screen lets you set the
options for connecting Wi-Fi devices.
● Soft APTurns Soft AP on or off. When Soft AP
is set to On, your mobile devices can
find the TV's network name in their WiFi connection list.
● Security Key
Enter a Security Key at least 8
characters long using the remote
control. Select Done when finished.
– If the security key is not at least
8 characters long, Done is not
available.– To connect a mobile device to the
TV, you must input the security key
into the device.
– If network does not operate correctly,
check the security key again. An
incorrect security key may cause a
malfunction.
Using Wi-Fi Direct or Soft AP, you can
share data through AllShare Play.
(For only some of the mobile device models among the mobile device
models supporting Wi-Fi Direct or Soft
AP.)
Wi-Fi Direct Soft AP
Number of Wi-Fi devices that
can be connected
Up to 5 Up to 5
Data sharing
Supported through AllShare
(only for supported mobile
device models.)
Only through AllShare
AllShare Settings
Menu → Network → AllShare Settings
AllShare Play lets you play Videos,
Photos, or Music located on your PC or your DLNA compatible device on the
TV using a network connection. It also
lets you control the TV through these
devices.
The AllShare Settings screen lists your
network connected AllShare devices
and their IP addresses. Through this
screen, you can allow a device to
access the TV, deny access, or delete
the device from the AllShare list.
The AllShare Settings screen only displays devices if you have established
networked connections to AllShare
devices. Otherwise, it will be empty.
To use the AllShare network function,
you must install the AllShare network
software on your PC. For details on set
up options, refer to "Using the AllShare
Play Functions".
Device Name
Menu → Network → Device NameEnter a name for this TV. This name will
be shown on network remote controls
and devices using AllShare Play.
N A keyboard appears on the screen.
Key in a name for your TV manually
using your remote. When finished,
select Done.
N To enter letters, highlight and select
each letter. To enter numbers,
highlight and select each number or
press the number buttons on your remote.
N To shift to capital letters (or from
capital letters to lower case), select
the Caps or Shift button.
N To display symbols and punctuation,
select . To redisplay letters, select
again.Setting the Time
Time
Menu → System → Time
N The current time will appear every
time you select INFO using your
remote.
● Clock
Set the clock to use the various timer
features of the TV.
N If you disconnect the power cord,
you have to set the clock again.Clock Mode: Set the current time
manually or automatically.
– Auto: The TV sets the current time
automatically using the time from a
digital channel.
N You must have the cable or an
aerial connected to the TV to set
the time automatically.
N Depending on the broadcast
station and signal, the auto time
set up may not be correct. In this case, set the time manually.
– Manual: Set the current time
manually.
Clock Set: Set the Date and Time
manually. You can set the current date
and time using your remote.
N Available only when the Clock Mode
is set to Manual.
Time Zone: Select your time zone.
N This function is only available when
the Clock Mode is set to Auto.GMT: Selects your time zone.
N When Country is set to Others, you
can use this function.
DST: Switches the DST (Daylight
Saving Time) function on or off.
N This function is only available when
the Clock Mode is set to Auto.
● Sleep Timer
Automatically shuts off the TV after a
preset period of time. (30, 60, 90, 120,
150, or 180 minutes).N Select a period of time using your
remote. To cancel the Sleep Timer,
select Off.
● On Timer
Set On Timer so that your TV turns on
automatically at a time and on a day
of your choosing. You can set up three
separate On Timer configurations (On
Timer 1, On Timer 2, On Timer 3) and
select the source of the content the TV
plays when it turns on: an air or cable channel, a USB device, or a set-top box
connected to one of the TV's inputs
(HDMI1, AV, etc.).
N You must set the clock before you
can use the On Timer function.
Setup: Select Off, Once, Everyday,
Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose
the days you want On Timer to turn on
your TV.
N The c mark indicates days you’ve selected.
Time: Set the time that the TV turns on
automatically.
Volume: Set the desired volume level.
Change the volume level using your
remote.
Source: To select the source of the
content that will play when the TV
turns on. You can:
– Select TV and have the TV display a
specific air or cable channel.– Select USB and have the TV play
back photo or audio files from a USB
device.
– Select a source on your TV (HDMI1,
HDMI2, Component, etc.) that you
have connected a set-top box to, and
have the TV display a channel from
the set-top box.
N The USB device must be connected
to your TV before you can select
USB.N If you select a source other than TV
or USB, you must:
Have a cable or satellite set-top
box attached to that source
Set the set-top box to the
channel you want to watch when
the TV goes on
Leave the set-top box turned on.
N When you select a source other than
TV or USB, the Aerial and Channel
options will disappear.Aerial (when the Source is set to TV):
Select ATV or DTV.
Channel (when the Source is set to TV):
Select the desired channel.
Music / Photo (when the Source is set
to USB): Select a folder in the USB
device that contains music that you
want played when the TV turns on
automatically or a folder that contains
music and a folder that contains photo
files. If you select both, the TV will display the photos you selected as it
plays the music you selected.
To select folders on the USB device,
follow these steps:
1. Select Music. The TV displays a
single folder (the Root folder) and
the type or name of the device.
2. Select the type or name of the device
you want to play. A list of folders on
the selected device appears.
N If there are no folders on your device, move the highlight to the
Select, and then select the Root
folder. The Timer screen re-appears
with the name of the device in the
Music field. Go to Step 4.
3. Highlight a folder that contains
music, highlight the Select next to
it. The Timer screen re-appears with
the folder name in the Music field.
4. If you want the TV to display photos
as the music you chose plays, select Photos, and then repeat the same
process.
5. When done, select the Close at the
bottom of the screen.
N You must select a music file. You
cannot select only a photo file.
N If there is no music file on the USB
device or you don’t select a folder
containing a music file, the Timer
function does not operate correctly.
N If there is only one photo file in the USB, the slide show will not play.
N If a folder name is too long, the
folder cannot be selected.
N Each USB you use is assigned its
own folder. When using more than
one of the same types of USB, make
sure the folders assigned to each
USB have different names.
N We recommend that you use a USB
memory stick and a multi card
reader when using the On Timer. The On Timer function may not work
with USB devices that have a built-in
battery, MP3 players, or PMPs made
by some manufacturers because the
TV can take too long to recognize
these devices.
N If you set the On Timer to play a file
saved on a USB HDD, it may take up
to 40 seconds or more to play the
file after the TV is turned on.
● Off TimerSet Off Timer so that your TV turns off
automatically at a time and on a day
of your choosing. You can set up three
separate Off Timer configurations. (Off
Timer 1, Off Timer 2, Off Timer 3)
N You must set the clock before you
can use the Off Timer.
Setup: Select Off, Once, Everyday,
Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose
the days you want Off Timer to turn off your TV.
N The c mark indicates days you’ve
selected.
Time: Set the time that the TV turns off
automatically.Blocking Programmes
Security
Menu → System → Security
Using this function, you can configure
programme related security options.
Every time you access the Security
functions, the PIN screen will appear
and you must enter that PIN. The PIN
screen closes and the Security menu
appears.● Channel Lock
Lock channels in Channel menu, to
prevent unauthorized users, such as
children, from watching unsuitable
programme.
N Available only when the Source is
set to TV.
● Programme Rating Lock
(Depending on the country)
When turned on, the Programme
Rating Lock feature can automatically block programmes that you deem
inappropriate for your children.
You must enter a PIN (personal
identification number) before you can
set or change any of the Programme
Rating Lock restrictions.
N The items of Programme Rating Lock
differs depending on the country.
● Adult genre enabling for U.K
You can adjust the Adult genre
enabling.N The Adult genre enabling is available
for Freesat aerial only.
● Change PIN
The Change PIN screen will appear.
Choose any 4 digits for your PIN and
enter them in the Enter New PIN. Reenter the same 4 digits in the Confirm
New PIN. When the Confirm screen
disappears, select Close. The TV has
memorised your new PIN.How to watch a restricted programme or
movie
If the TV is tuned to a restricted
programme or movie, the Programme
Rating Lock will block it.
The screen will go blank and the
message This channel is blocked by
Channel lock settings. Please enter PIN
to unblock. appears. Enter the PIN to
unblock the programme or movie using
your remote.Economical Solutions
Eco Solution
Menu → System → Eco Solution
● Energy Saving
Lets you adjusts the brightness of
the TV in order to reduce power
consumption. If you select Picture Off,
the screen is turned off, but the sound
remains on. Press any button except
the volume button to turn on the screen.
● Eco Sensor
for LED 4500, LED 5400 Series : This function
is not supported.
To enhance your power savings, the
picture settings will automatically
adapt to the light in the room.
N If you adjust Backlight for LED TV /
Cell Light for PDP TV in the Picture
menu, the Eco Sensor is set to Off
automatically.Min. Backlight for LED TV / Min Cell
Light for PDP TV : When the Eco Sensor
is set to On, you can manually adjust
the minimum screen brightness.
N If the Eco Sensor is set to On, the
display brightness may change
(become slightly darker or brighter)
depending on the surrounding light
intensity. You can control the screen’
s minimum brightness with the Min.
Backlight for LED TV / Min Cell Lightfor PDP TV function.
● No Signal Power Off
To avoid unnecessary energy
consumption, you can set how long
you want the TV to remain on if it’s not
receiving a signal.
● Auto Power Off
The TV will automatically turned off
when no user operation is detected for
4 hours.Picture In Picture (PIP)
PIP
Menu → System → PIP
You can watch a programme whose
signal has passed through the TV’s
tuner and watch video from one
external video source simultaneously.
If you have a Blu-ray player connected
to the TV, for example, you can watch
a TV programme and the Blu-ray movie at the same time by using the PIP
feature.
N While Smart Hub or Programme
Rating Lock is on, you cannot use
the PIP.
● PIP
Activate or deactivate the PIP function.
● Channel
Select the channel for the sub-picture
screen.
● SizeSelect a size for the sub-picture screen.
● Position
Select a position for the sub-picture
screen.
● Sound Select
You can choose to listen to the sound
from the main picture or the sub
picture.
N If you turn the TV off while watching
in the PIP mode, the PIP function is
reset to Off. When you turn your TV on, you must turn PIP on again to
watch in the PIP mode.
N You may notice that the picture in
the PIP screen becomes slightly
unnatural when you use the main
screen to view a game or karaoke.
N PIP does not work when the 3D
function is active.
N PIP Settings: The picture from the
external video source will be in the
main screen and the picture from the TV’s tuner will be in the PIP subpicture screen.
– Main picture: Component, HDMI
– Sub picture: TVOther Features
Language
Menu → System → Language
● Menu Language
Set the menu language.
● Teletext Language
Set a desired language for teletext.
N English is the default in cases where
the selected language is unavailable
in the broadcast.● Preferred Language
Select a language, which will be the
default language when a channel is
selected.
Device Manager
Menu → System → Device Manager
Using this function, you can set up
a keyboard or mouse to use with the
TV. You can view your device lists and
adjust keyboard or mouse settings in this menu.
N Depending on the model of the USB
HID keyboard and mouse may not be
compatible with your TV.
N You can connect a keyboard and
mouse at the same time.
● Keyboard settings
Lets you use a USB or Bluetooth
keyboard with your TV. for LED 6100-
7200 Series and PDP TV If you want to
use a USB keyboard, connect it to the USB port. If you want to use a
Bluetooth keyboard, connect it using
the Bluetooth function.
N Available only when the QWERTY
keypad screen appears.
Select keyboard
Select which keyboard to use from your
keyboard list. You can only use one
keyboard at a time even if several are
connected.
Add Bluetooth Keyboard for LED 6100-7200 Series and PDP TV
You can add a Bluetooth keyboard.
Keyboard Options
Sets the default options for the
keyboard language and type.
– Keyboard Language: Set a language
for your keyboard.
– Keyboard type: Set what a type of
keyboard you're using to enter text.
– Switch Input Language: Select a key
sequence to change switching input language.
● Mouse settings
Lets you use a USB or Bluetooth mouse
with your TV. If you want to use a USB
mouse, connect it to the USB port. for
LED 6100-7200 Series and PDP TV If you want
to use a Bluetooth mouse, connect it
using the Bluetooth function.
You can use a mouse in the TV's menu
in the same way you use a mouse on
your PC.Select mouse
Select which mouse to use from your
mouse list. You can only use one
mouse at a time even if several are
connected.
Add Bluetooth mouse
for LED 6100-7200 Series and PDP TV
You can add a Bluetooth mouse.
Mouse Options
Sets the default options for the mouse
buttons.– Primary Button: Select the main
button you want to use to click and
select on screen.
– Pointer Size: Set the size of the onscreen mouse pointer.
– Pointer Speed: Select the speed of
the mouse pointer.
Using the TV's menu with a mouse
1. Connect a USB or Bluetooth mouse
on your TV.2. Click a primary button you selected.
The Go To pop-up appears.
3. Click a menu you wish, and then you
can use the menu to same way as on
a PC.
Subtitle
(On-Screen Text Messages)
Menu → System → Subtitle
Use this menu to set the Subtitle mode.
● SubtitleSwitches subtitles on or off.
● Subtitle Mode
Sets the subtitle mode.
● Subtitle Language
Sets the subtitle language.
N If the programme you are
watching does not support the
Hearing Impaired function, Normal
automatically activates even if the
Hearing Impaired mode is selected.
N English is the default in cases where the selected language is unavailable
in the broadcast.
Digital Text for U.K
Menu → System → Digital Text
If the programme broadcasts with
digital text, this feature is enabled.
MHEG (Multimedia and Hypermedia
Information Coding Experts Group):
An International standard for data
encoding systems used in multimedia and hypermedia. This is at a higher level
than the MPEG system which includes
data-linking hypermedia such as still
images, character service, animation,
graphic and video files as well as
multimedia data. MHEG is user runtime
interaction technology and is being
applied to various fields including VOD
(Video-On-Demand), ITV (Interactive
TV), EC (Electronic Commerce), teleeducation, tele-conferencing, digital libraries and network games.
Screen Burn Protection for PDP TV
Menu → System → Screen Burn Protection
To reduce the possibility of screen
burn, this unit is equipped with Pixel
Shift screen burn prevention technology.
Pixel Shift moves the picture slightly on
the screen.
The Pixel Shift Time setting allows
you to programme the time between movements of the picture in minutes.
Your TV also has the following
additional screen burn protection
functions:
– Pixel Shift
– Auto Protection Time
– Scrolling
– Side Grey
● Pixel Shift
Using this function, you can set the TV to move pixels minutely on the
PDP screen in a horizontal or vertical
direction to minimize after images on
the screen.
Available Pixel Shift settings and
optimum settings:
Horizontal
– Available Settings: 0 – 4 (pixels)
– Optimum settings for TV/AV/
Component/HDMI: 4 Vertical
– Available Settings: 0 – 4 (pixels)
– Optimum settings for TV/AV/
Component/HDMI: 4
Time (minutes)
– Available Settings: 1 – 4 min
– Optimum settings for TV/AV/
Component/HDMI: 4 min
N The Pixel Shift value may differ
depending on the monitor size
(inches) and mode.N This function is not available in
the Screen Fit mode.
● Auto Protection Time
If the screen displays a still image for
a certain period of time you define, the
TV activates the screen saver to prevent
the formation of burnt in ghost images
on the screen.
● Scrolling
This function removes after-images on
the screen by illuminating all the pixels on the screen according to a pattern.
Use this function when there are after
images or symbols on the screen,
especially when you displayed a still
image on the screen for a long time.
N The after-image removal function
has to be executed for a long time
(approximately 1 hour) to effectively
remove after-images on the screen.
If the after-image is not removed
after you apply the function, repeat the function.
N Press any button to cancel this
feature.
● Side Grey
When you watch TV with the screen
ratio set to 4:3, using the Side Grey
function can prevent damage to the
edges of the screen by adjusting the
white balance on the extreme left and
right sides.Auto Protection Time for LED TV
Menu → System → Auto Protection Time
If the screen displays a still image for
a certain period of time you define, the
TV activates the screen saver to prevent
the formation of burnt in ghost images
on the screen.
General
Menu → System → General
● Game ModeWhen you have connected a game
console such as a PlayStation™ or
Xbox™ to the TV, you can enjoy a
more realistic gaming experience if you
set the Game Mode on.
Precautions and limitations for Game
Mode
– Before disconnecting a game console
and connecting another external
device, set Game Mode to Off.– If you display the TV menu in Game
Mode, the screen shakes slightly.
N Game Mode is not available when
the input source is set to TV.
N Set Game Mode to On only after
connecting a game console. If you
turn Game Mode on before you have
attached the game console, you may
notice reduced picture quality.
N If Game Mode is set to On, Picture
Mode is set to Standard and Sound Mode is set to Movie automatically.
● BD Wise
for LED 4500 - 5700 Series : This function is
not supported.
Provides the optimal picture quality
for Samsung DVD, Blu-ray, and Home
Theatre products which support BD
Wise. When the BD Wise is set to On,
the picture mode is automatically
changed to the optimal resolution.
N Available when you connect Samsung products that support BD
Wise through an HDMI cable to the
TV.
● Menu Transparency
Adjust transparency of menu box.
● Sound Feedback
Your TV gives sound feedback when
you use TV. Sound Feedback is enabled
by default. Turn off Sound Feedback or
adjust its volume.
● Panel LockLock or unlock all the keys on the TV
Controller at once. When Panel Lock is
on, the TV Controller does not operate.
● Boot Logo
Displays the Samsung logo when the
TV is turned on.
Anynet+ (HDMI-CEC)
Menu → System → Anynet+ (HDMI-CEC)
Allows you to control all connected
Samsung devices that support anynet+ with your Samsung TV’s remote.
For details on set up options, refer
to the “Anynet+ (HDMI-CEC)”
instructions.
DivX® Video On Demand
Menu → System → DivX® Video On
Demand
Shows the registration code authorized
for the TV. If you connect to the DivX
web site and register with 10-digit
registration code, you can download the VOD activation file. Once you play
it using Media Play, the registration is
completed.
N For more information on DivX(R)
VOD, visit http://vod.divx.com.
Common Interface
Menu → System → Common Interface
● CI Menu: This enables the user to select
from the CAM-provided menu. Select
the CI Menu based on the menu PC
Card.● Application Info: View information
on the CAM inserted into the CI slot
and on the “CI or CI+ CARD” which is
inserted into the CAM. You can install
the CAM anytime whether the TV is on
or off.
1. Purchase a CI CAM module at your
nearest dealer or by phone.
2. Firmly insert the “CI or CI+ CARD”
into the CAM in the direction of the
arrow.3. Insert the CAM with the “CI or CI+
CARD” into the common interface
slot, in the direction of the arrow so
that it aligns parallel with the slot.
4. Check if you can see a picture on a
scrambled signal channel.Support Menu
e-Manual
Menu → Support → e-Manual
The e-Manual is built into your TV.
Open the e-Manual to learn how to use
your TV are many features.
N For the detailed information about
the e-Manual Screen, refer to “How
to view the e-Manual” in the User’s
Manual.Self Diagnosis
Menu → Support → Self Diagnosis
● Picture Test
Use to check for picture problems.
Picture Test displays a high definition
picture that you can examine for flaws
or faults.
Yes: Select Yes if the test picture
does not appear or there is noise or
distortion in the test picture. There
may be a problem with the TV. Contact Samsung’s Call Centre for assistance.
No: Select No if the test picture
displays properly. There may be a
problem with your external equipment.
Please check your connections. If the
problem persists, refer to the external
device’s user manual.
● Sound Test
Use the built-in melody to check for
sound problems.
N If you hear no sound from the TV’s speakers, before performing the
sound test, make sure Speaker Select
is set to TV Speaker in the Sound
menu, and then try the speakers
again.
N You will hear the melody during the
test even if you have set Speaker
Select to External Speaker or have
muted the sound.
Yes: Select Yes if you can hear sound
from only one speaker or from neither speaker during the sound test. There
may be a problem with the TV. Contact
Samsung’s Call Centre for assistance.
No: Select No if you can hear sound
from the speakers. There may be a
problem with your external equipment.
Please check your connections. If the
problem persists, refer to the external
device’s user manual.
● Signal Information
(Digital channels only)The reception quality of over-theair HD channels is either perfect or
the channels are unavailable. Signal
Information displays HD channel signal
strength so you can adjust your aerial
to increase signal strength and receive
HD channels.
● Reset
Reset all setting to factory defaults
except for your network settings.
To reset your TV to its default settings, follow these steps:
1. Go to the Reset menu. (Support →
Self Diagnosis → Reset)
2. The PIN input screen appears. Enter
the four digit security PIN using your
remote.
N If you have not changed the PIN,
enter the default PIN, 0-0-0-0.
You can change the PIN using the
Change PIN option. (System →
Security → Change PIN)3. When done, the PIN screen disappear.
The message "All the settings will
return to factory defaults." appears.
4. Select Yes. All settings are reset.
The TV will turn off and on again
automatically. The Setup screen
appears. For more information about
Setup, see the paper user manual.
● Troubleshooting
If your TV seems to be having a
problem, access the troubleshooting guide for a solution.
Software Update
Menu → Support → Software Update
The Software Update menu lets you
upgrade your TV’s software to the
latest version.
Current Version: This is the software
version already installed in the TV.
Upgrading to the Latest Version you can upgrade in five ways:
– By USB
– Online
– By Channel
– Alternative Software
– Standby Mode Upgrade
The five methods are explained in the
following pages.
N Be careful not to turn off the power
until the upgrade is complete. The
TV will turn off and on automatically after completing the software
upgrade. When you upgrade
software, all video and audio
settings you have made will return to
their default settings. We advise you
to write down your settings so that
you can easily reset them after the
upgrade.
● By USB
To upgrade the By USB, follow these
steps:1. Visit www.samsung.com.
2. Click Support at the top of the page.
3. On the Support page, enter your
model number in the Find Your
Product field, and then press Enter or
click Find Product.
4. Under Downloads on the left side,
click Get downloads. The Download
Centre screen appears.
5. Click Firmware on the left side of the
page.6. On the Firmware tab, click the file
icon on the right, and then click Save
File on the pop-up that appears.
7. Extracts the exe archive to your
computer. You should have a single
folder with the same name as the
exe file.
8. Copy the folder to a USB flash drive.
9. Turn on the TV, and then insert the
USB flash drive into the USB port of
the TV.10.In the TV’s menu, go to Support →
Software Upgrade.
11.Select the By USB.
N Please be careful not to remove
the USB drive until the upgrade is
complete.
● Online
The Online function lets you download
the upgrade software directly from the
Internet into your TV and then upgrade
the software in one operation. To use Online, you must have configured your
TV to connect to your network and the
TV must be connected to the Internet.
See the "Setting up the Network"
instructions.
To upgrade using the Online, follow
these steps:
1. Select the Online. The Connecting to
Server message appears.
2. If there is a download available, the Download popup appears with
a progress bar and the download
starts.
3. When the download is complete,
the Upgrade Query screen appears
with three choices: Upgrade Now,
Upgrade Later, or Don't Upgrade.
– If you select Upgrade Now, the TV
upgrades the software, turns off,
and then turns on automatically.
– If you do not make a selection in one minute or select Upgrade
Later, the TV stores the new
upgrade software. You can
upgrade the software later using
the Alternative Software function.
– If you select Don't Upgrade, the
TV cancels the upgrade.
● By Channel
Upgrade the software using the
broadcasting signal.
N If the function is selected during the software transmission period,
software will be automatically
searched and downloaded.
N The time required to download the
software is determined by the signal
status.
● Alternative Software
The Alternative Software option
lets you upgrade using a file the TV
downloaded earlier, but you decided
not to install immediately, or a file downloaded by the TV in Standby
Mode (See Standby Mode Upgrade in
the next section).
To upgrade using Alternative Software,
follow these steps:
1. If upgrade software has been
downloaded, you will see the
software version number to the right
of Alternative Software.
2. Select Alternative Software.3. The TV displays a message asking if
you want to upgrade. Select Yes. The
TV begins the upgrade.
4. When the upgrade is complete, the
TV turns off automatically, and then
turns on.
● Standby Mode Upgrade
You can set the Standby Mode Upgrade
function so that the TV downloads new
upgrade software when it is in Standby
mode.In Standby mode, the TV is off, but
its Internet connection is active. This
allows the TV to download upgrade
software automatically, when you are
not using it. Because the TV is turned
on internally, the screen may glow
slightly. This phenomenon may continue
for more than 1 hour until the software
download is complete.
To set Standby Mode Upgrade, follow these steps:
1. Select the Standby Mode Upgrade.
2. Select Off, 1 hour later, 2 hours later,
0:00, 2:00, 12:00 or 14:00.
– Off: If you select Off, the TV will
notify you with a pop up message
when new upgrade software is
available.
– 1 hour later / 2 hours later / 0:00
/ 2:00 / 12:00 / 14:00: The TV
will automatically download new upgrade software when it is in
Standby mode with the power off.
N To use the Standby Mode Upgrade
function, your TV must be connected
to the Internet.
Contact Samsung
Menu → Support → Contact Samsung
View this information when your TV
does not work properly or when you
want to upgrade the software. You can find information regarding our call
centres and how to download products
and software.
Remote Management
Menu → Support → Remote Management
Remote Management lets our Call
Centre access and control your
Samsung Product remotely to
troubleshoot a problem. Use Remote
Management only when you have a problem, and contact our Call Centre
first, before you activate Remote
Management.
You can find the current number of
our Call Centre on the Support page
at www.samsung.com under Contact
support.
Smart Hub
Menu → Support → Smart Hub
Smart Hub lets you connect to the Internet and enjoy a variety of Internet
and multimedia contents. For more
information on how to use the Smart
Hub, see “Smart Hub” in the e-Manual.Using the 3D function
for LED 4500 - 5700 Series : This function is not
supported.
3D
Menu → Picture → 3D
This exciting new feature enables you
to view 3D content. To fully enjoy
this feature, you must need a pair of
Samsung 3D Active Glasses to view 3D
video.
Advanced FeaturesIMPORTANT HEALTH AND SAFETY
INFORMATION FOR 3D PICTURES.
Read and understand the following safety
information before using the TV’s 3D function.
[ Warning
Some viewers may experience
discomfort while viewing 3D TV such
as dizziness, nausea and headaches.
If you experience any such symptom,
stop viewing 3D TV; remove the 3D Active Glasses and rest.
Watching 3D images for an extended
period of time may cause eye strain.
If you feel eye strain, stop viewing
3D TV; remove your 3D Active
Glasses and rest.
A responsible adult should frequently
check on children who are using the
3D function. If there are any reports
of tired eyes, headaches, dizziness, or
nausea, have the child stop viewing 3D TV and rest.
Do not use the 3D Active Glasses
for other purposes (such as general
eyeglasses, sunglasses, protective
goggles, etc.)
Do not use the 3D function or 3D
Active Glasses while walking or
moving around. If you use the 3D
function or 3D Active Glasses while
walking or moving around you
can injure yourself by running into objects, tripping, or falling.
● 3D Mode
Select the 3D input format.
N If you want to experience the 3D
effect fully, put the 3D Active Glasses
on first, and then select the 3D Mode
from the list below that provides the
best 3D viewing experience.
Off : Turns the 3D function off.
: Changes a 2D image to 3D.
: Displays two images next to each other.
: Displays one image above another.
N The 3D Mode may differ depending
on the input signal.
N Some file formats may not support
.
● 3D Perspective
Adjusts overall 3D perspective of onscreen image.
● Depth
Adjusts overall depth.● L/R Change
Swaps the left and right pictures.
● 3D Optimisation for LED TV
Automatically adjusts the picture
overall to provide an optimal 3D effect.
Support resolution (16:9 only)
HDMI3D Format Resolution Frequency (Hz)
/
1280 x 720p 50 / 59.94 / 60 Hz
1920 x 1080i 50 / 59.94 / 60 Hz
1920 x 1080p 23.98 / 24 / 25 / 29.97 /
30 / 50 / 59.94 / 60 Hz
Frame Packing
1280 x 720p 50 / 59.94 / 60 Hz
1920 x 1080i 50 / 59.94 / 60 Hz
1920 x 1080p 23.98 / 24 / 25 /
29.97 / 30 Hz
Component
Resolution Frequency (Hz)
1280 x 720p 50 / 59.94 / 60 Hz
1920 x 1080i 50 / 59.94 / 60 Hz
1920 x 1080p 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60 Hz
DTVResolution Frequency (Hz)
1280 x 720p 50 / 59.94 / 60 Hz
1920 x 1080i 50 / 59.94 / 60 Hz
1920 x 1080P 25 Hz
Videos / Photos (In AllShare Play)
N Refer to "Supported Subtitle and
AllShare Play file formats" in the
Other Information section.
Resolution supported for HDMI PC mode
The optimal resolution for 3D in the HDMI PC mode is 1920 x 1080.
If the input resolution is not 1920 x
1080, the TV may not display images
properly in 3D display or full screen
mode.
How to watch the 3D images
Some 3D modes may not be available
depending on the format of the image
source.
To watch in 3D, you must wear 3D Active Glasses and turn the glasses on
by pressing the power button.
1. Go to the 3D screen. (Picture → 3D)
2. Select the 3D Mode, The 3D Mode
screen appears.
3. Select the 3D Mode option for the
image you want to view. The screen
goes blank for a moment, and then
reappears in the 3D mode you
selected.Read These Notes Before Using the 3D
Function...
The 3D Mode is set to Off
automatically when you access
Smart Hub function.
The 3D Mode is set to its memorised
configuration value automatically
when you change the input source.
Some Picture functions are disabled
in 3D mode.
PIP is not supported in 3D mode. 3D Active Glasses from Samsung’s
previous IR type 3D products and 3D
glass from other manufacturers are
not supported.
When the TV is initially powered on,
it may take some time until the 3D
display is optimized.
The 3D Active Glasses may not work
properly if there is any other 3D
product or electronic device turned
on near the glasses or TV. If there is a problem, keep other electronic
devices as far away as possible from
the 3D Active Glasses.
Be sure to stay within the viewing
angle and optimum TV viewing
distance when watching 3D pictures.
Otherwise, you may not be able to
see 3D effects properly.
The ideal 3D viewing distance is
three times or more the height of the
screen. For example, if your screen is two feet high, you should sit at
least six feet from the screen. We
recommend sitting so that your eyes
are level with the screen.Smart Hub
Menu → Support → Smart Hub
Using Smart Hub, you can stream
movies, videos, and music from the
Internet, access various for pay or freeof-charge applications and view them
on your TV.
Application content includes news,
sports, weather forecasts, stock market
quotes, maps, photos, and games.
N You can also start this function by pressing the ™ button on the remote
control.
Notice
Samsung Electronics takes no legal
responsibility for any interruption of
the Smart Hub service caused by the
service provider for any reason.
Application services may be provided
in English only and the contents
available may vary, depending on your area.
For more information about a Smart
Hub service, visit the web site of the
applicable service provider.
The Smart Hub service downloads
and processes data via the Internet
so that you can enjoy the Internet
contents on your TV screen. If the
Internet connection is unstable,
the service may be delayed or
interrupted. Furthermore, the player may turn off automatically
in response to conditions on the
Internet. If this occurs, check the
Internet connection and try again.
The services provided are subject
to change by the Smart Hub service
provider without notice.
The Smart Hub service contents may
differ depending on the player’s
firmware version.To start Smart Hub for the first time, follow
these steps:
1. Press the ™ button.
2. The Smart Hub screen appears. In
a few cases, the Country screen
appears immediately.
3. If the Country screen has appeared,
select your country using your
remote.
N Some applications are available
only in certain countries.4. The General Disclaimer screen
appears. Select Agree.
N Screens can take a few seconds
to appear.
5. The Samsung Service Privacy policy
screen appears. Select Agree.
6. The Update Pop-up appears. Select
OK.
7. The Service Update screen appears
and installs a number of services and
applications. When done, it closes. The Smart Hub screen displays
the downloaded applications and
services. This may take some time.
N Smart Hub may close momentarily
during the installation process.
N A number of screens may appear
after installation. You can close
them or let them close on their
own.
8. To start an application, select an
application using your remote.Using the Keypads and Keyboards
A number of Smart Hub applications
display a numeric keypad or a QWERTY
keyboard so you can enter account
names, passwords, and other data.
In most applications, you can toggle
between the numeric keypad and the
QWERTY keyboard by selecting the b
button.Using the Numeric Keypad
When the keypad is displayed, you
can use your remote to enter letters
in lower or upper case, numbers,
punctuation, and symbols.
There are two ways to enter characters,
in the ABC mode and in the XT9 mode.
Method 1: Using the keypad of ABC
type.
Example: Inputting “105Chang”.1. Select the TTX/MIX key three times
using your remote to change the
input mode from lower case to
numbers.
2. Select 1, 0 and 5 in numerical order
on your remote.
3. Select the TTX/MIX key three times
using your remote to change the
input mode from numbers to upper
case.
4. Select 2 three times using your remote to input C.
5. Input the rest of “Chang” using your
remote in the same way. When done,
select OK.
Method 2: Using the Keypad of XT9
type.
To change to XT9 mode, follow these
steps:
A.With the Numerical keypad displayed,
open the Tools menu using your remote.
B. On the Tools menu, select XT9 text
input.
C. Select On, and then select OK.
Example: Inputting“105Chang”.
1. Select the TTX/MIX key three times
using your remote to change the
input mode from lower case to
numbers.
2. Select 1, 0 and 5 in numerical order
on your remote.3. Select the TTX/MIX key three
times using your remote to change
the input mode from numbers to
capitalized case.
4. Select in sequence: 2, 4, 2, 6, 4. A
thin window appears at the top of
the screen displaying a list of words
you can enter.
Using the QWERTY Keypad
If you have a USB or Bluetooth keyboard attached to the TV, and the
screen is displaying the QWERTY
keyboard, you can use the attached
keyboard just like a regular keyboard.
Type a character and the character
appears on the screen.
If you don't have a USB or Bluetooth
keyboard attached and the QWERTY
keyboard is displayed, use your remote
to highlight and then select letters,
numbers, and symbols on the keyboard one at a time.
N Select the Caps or Shift button to
display Capital letters. Select again
to re-display lower case.
N Select the 1 button to display
symbols and icons. Select again to
re-display letters.
N If XT9 text input is On, words will
appear in a ribbon at the top of the
page. Select the } button to select a
word in the ribbon.Using the coloured and function
buttons with the QWERTY Keypad
● a Delete All
Delete all inputted character.
● b Numeric / QWERTY
Toggles the keypad mode between
Numeric keypad mode and QWERTY
mode.
N When the keypad is set to
QWERTY mode, you can input characters using a USB or
Bluetooth keyboard connected on
the TV.
● { Space
You can enter a space character.
● T Settings
Displays the options menu.
Input Language: Select an input
language.
XT9 text input: Turns the XT9 word
function on or off. Available in both Numeric Keypad and QWERTY mode
when you use the remote or a mouse
to select and enter characters.
● E Enter
Enter the selected character.
● R Return
Return to the previous menu.
● π Prev Page
Display the previous set of symbols/
icons.
N Available only when the keypad screen is in symbol/icon mode (
).
● µ Next Page
Display the next set of symbols/
icons.
N Available only when the keypad
screen is in symbol/icon mode (
).
Creating an Account
To establish your own, exclusive configuration of Smart Hub, create your
own Samsung Account.
N You must use an e-mail address as
an ID.
N You can register up to 10 User
Accounts.
N You do not need an account to use
Smart Hub.
To create an account, follow these
steps:1. On the Smart Hub screen, select a
using your remote. The Login screen
appears.
2. Select Create Account using your
remote. The Create Account screen
appears.
3. Select Samsung Account. An entry
screen and keypad appear.
4. Use the keypad to enter your e-mail
address. This will serve as your ID.
N If you have a Bluetooth or USB keyboard attached to the TV, use
the keyboard to enter the e-mail
address. Then, in Steps 6 through
10, use the keyboard to enter the
required password. Note that after
you type in the e-mail address
and password, you will need to
use your remote to continue.
5. When done, select OK. The Login
screen reappears.
6. Select Password. The Passwordscreen and a keypad appear.
7. Use the keypad to enter a password.
The password can be any
combination of letters, numbers, and
symbols.
N Select a using your remote to
display or hide the password as
you enter it.
8. When done, select OK.
9. Select Confirm Password. The
Password screen and a keypad re-appear.
10.Repeat Steps 7 and 8.
11.When done, select Create Account.
The Confirmation window appears.
12.Select OK. The Continue to register
service ID window appears.
13.Select OK.
N If you don’t have existing provider
accounts or do not want to register
existing accounts at this time, select
Cancel. You can also let the window close on its own in about a minute.
14.The Register service account window
appears.
N If you have existing accounts
with any of the listed providers,
you can associate the provider
account and the provider account
password with your Samsung
Account. Registration makes it
easier to access the provider’s web
site. For registration instructions, go to Step 2 in Account Manager
under Settings in the “Configuring
Smart Hub with Settings” section
of this manual.Customizing the Home Screen
● a Login / Logout
To log in to your Samsung Account,
follow these steps:
1. With the Smart Hub main screen
displayed on your TV, select a
using your remote. The Login screen
appears.
2. Select the ^ next to the Samsung
Account entry filed. A drop down list appears.
N If you want to input your Samsung
Account name manually, select
the Samsung Account entry field.
A keypad screen appears. Input
your Samsung Account manually.
When done, go to Step 4.
3. Select your ID from the list that
appears. The Login screen reappears.
4. Select Password. The Passwordwindow and a keypad appear.
5. Enter your password using your
remote. When done, select OK.
N If you want Smart Hub to enter
your password automatically, select
Remember my password. after you
have entered your password. A c
mark appears. Smart Hub will now
enter your password automatically
when you select or enter your ID.
N If you want to log in to Smart Hubautomatically when Smart Hub
function starts, select Sign me in
automatically. A c mark appears.
N If you forget your Samsung account
password, you can reset it. Select
b using your remote. A popup
message appears. Select OK. Smart
Hub will send a guide to your e-mail
address that explains how to reset
your password.
● b WallpaperYou can change the background image
on the Smart Hub home screen.
● { Account Manager
Lets you register your service provider
accounts, delete or deactivate
your Samsung account. For more
information about Account Manager,
see "Configuring the Smart Hub with
the Settings Menu" in this section.
N Available only when you have logged
in to Smart Hub.Using the Tools menu with Smart Hub
N Depending on the icons and folders
displayed on the Smart Hub screen,
some of the functions listed below may
not appear.
● Login / Logout
Log in or log out of your Samsung
Account.
● Wallpaper
You can change the background image on the Smart Hub home screen.
● Move
The Move function lets you change the
screen position of an application or a
folder.
To use the Move function, follow these
steps:
1. Select an application icon or a folder,
and then open the Tools menu using
your remote.2. Select the Move. A position change
screen appears.
3. Move the icon using your remote.
When the icon is in the position of
your choice, select the icon. The
application icon moves to its new
location.
● Move to Folder
The Move to Folder function lets you
move an application to a folder.To use the Move to Folder function,
follow these steps:
1. Select an application, and then open
the Tools menu using your remote.
2. Select the Move to Folder. The Move
to Folder window opens.
3. Select a folder using your remote.
A move finished message appears.
Select OK. The message window
closes. The application has been
moved to the folder.N If you select an application in a
folder, you can use the Move to
Folder to move the application to the
Smart Hub screen.
To access an application in a Folder
1. On the Smart Hub screen, select a
folder. The folder opens.
2. Select an application you want to
execute. The application service
starts.● Delete
The Delete function lets you delete
applications from Smart Hub.
To use the Delete function, follow these
steps:
1. Select an application, and then open
the Tools menu using your remote.
2. Select the Delete. The message
Do you want to delete the selected
item(s)? appears.3. Select OK. The application is deleted.
● New Folder
The New Folder function lets you create
and name new folders. You can move
applications into the folders
you have created.
To use the New Folder function, follow
these steps:
1. Open the Tools menu using your
remote.2. Select the New Folder in the menu.
The New Folder pop-up and a
keyboard screen appear.
3. Using the keyboard and your remote,
enter a name for the folder.
4. When done, select OK. The New
Folder screen closes and the New
Folder appears on the Smart Hub
screen.
● Rename Folder
The Rename Folder function lets you rename folders.
To use the Rename Folder function,
follow these steps:
1. Select a folder, and then open the
Tools menu using your remote.
2. Select the Rename Folder. The
Rename Folder window and a
keyboard screen appear.
3. Enter a new name using your remote
or edit the old name.4. When done, select OK. The Rename
Folder window closes and the new
or revised name appears below the
folder.
● Lock
The Lock function lets you lock some
applications in Smart Hub so they
cannot be opened without entering the
password.
To use the Lock function, follow these steps:
1. Select an application, and then open
the Tools menu using your remote.
2. Select Lock. The Security window
appears.
3. Enter your security PIN using the
remote. If you have not created a
PIN, enter “0-0-0-0”.
4. A confirmation message screen
appears. Select OK. The message
screen closes and a lock symbol appears to left of the application.
● Unlock
To use the Unlock function, follow
these steps:
1. Select a locked application, and then
open the Tools menu using your
remote.
2. Select Unlock. The Security window
appears.
3. Enter your security PIN using the remote. If you have not created a
PIN, enter “0-0-0-0”.
4. A confirmation message screen
appears. Select OK. The message
screen closes and the lock symbol to
left of the application disappears.
● Information
Depending on application, you can
view the detailed information about the
selected application.
N You can also lock or unlock the application on the Detailed
Information screen.
Configuring Smart Hub with the Settings
Menu
The Settings menu gives you access
to Account Manager, Service Manager,
Reset, and About Smart Hub functions.
To use these three functions, you must
be logged into your Samsung Smart
Hub account.To access the Settings menu, and then
select a menu item, follow these steps:
1. Open the Tools menu using your
remote.
2. Select Settings. The Settings window
appears.
3. Select a menu item using your
remote.
● Account Manager
The Account Manager menu contains functions that let you register your
service provider accounts and delete or
deactivate your Samsung Account.
Link to other accounts: If you have
existing accounts with any of the
providers listed by the Link to other
accounts function, you can associate
the provider account and the provider
account password with your Samsung
Account. If you associate the account,
you will be able to log onto the account through Smart Hub easily,
without entering your account name or
password.
N Before register your site account,
corresponding application should be
installed in the Smart Hub.
To use the Link to other accounts
function, follow these steps:
1. In the Account Manager menu, select
the Link to other accounts. The Link to other accounts window appears.
2. Select an application you want
to associate with your Samsung
Account.
3. In the pop-up that appears, select
Register.
4. In the Link to other accounts entry
screen, enter your site ID and
password using your remote. When
done, select OK.
N This is the ID and password you normally use to access your
account on this application.
5. If you have entered the ID and
password correctly, the Registered
successfully. message appears.
6. If want to add another service
application, and then repeat Steps
2 through 4 to associate another
service application.
7. When done, select OK.Remove from TV account list: Cancels
all the currently registered Service
Accounts that appear on the Register
service account screen.
Deactivate account: Deactivates your
Samsung Account and deletes it and all
your account settings entirely from the
Smart Hub.
● Service Manager
Auto Ticker: You can set Auto Ticker to come on when the TV powers.
N The Ticker application provides
useful News, Weather, and Stock
Market information. Before you can
set the Auto Ticker on, you must
download the Ticker application into
Smart Hub.
N Depending on your country, the
Ticker application may have a
different service or not be supported.
Push Notification Settings: When on, Push Notification that displays a
notification message when an event
takes place in an application installed
on Smart Hub. The TV will display the
notification message and allow you to
view details of the event even while
you are viewing TV.
● Reset
The Reset function initializes all
downloaded applications, erases all
user accounts and settings from the TV, and resets all Smart Hub settings to the
factory default settings. It then restarts
Smart Hub as if it were starting for the
first time.
Your account, however, remains on
the Smart Hub server. To log into your
account, enter your ID and password
on the Login screen.
To use the Reset function, follow these
steps:1. In the Settings menu, select Reset.
The Reset screen appears.
2. Enter security PIN using your remote.
3. After a few moments, Smart Hub
automatically resets. The screen may
go black, and then Smart Hub reappears. In a few moments, it starts
the re-initialization procedure.
4. To complete the re-initialization, go
to Step 2 in "To start Smart Hub for
the first time, follow these steps:" section of this manual.
● About Smart Hub
The About Smart Hub menu contains
functions that display information
about Smart Hub.
More: Lists information about Smart
Hub including version number, the
number of services installed, memory
usage, and the unique product ID.
Terms of Service Agreement: Display
the Terms of Service Agreement.Using Samsung Apps
Samsung Apps
™ → Samsung Apps
Samsung Apps is a store from which
you can download applications to use
on Samsung TV/AV equipment.
You can enjoy a variety of contents
such as videos, music, photos, games,
useful information etc. using the
downloaded applications.New applications are added regularly.
Using the coloured and function buttons
with Samsung Apps
● a Login / Logout
Log in to or log out of your Samsung
Account.
● b Filter by Price
To toggle the view between All, Paid
and Free.
● { SortTo sort the applications by
Recommended, Name, Date or
Downloaded.
N You can sort all categories except
Most Popular.
● } View Mode
Each time you select } using your
remote, the View Mode toggles
between basic mode and thumbnail
mode.
● π PreviousMove to previous page.
● µ Next
Move to next page.
● T Tools
Displays the option menu.
● R Return
Moves to previous menu.
Using Samsung Apps by category
The following categories are available:
● Most PopularDisplays the most popular applications
for users.
● Video
Includes apps that provide video media
such as movies, TV shows, and short
length videos.
● Game
Includes various game apps such as
sudoku and chess.
● Sports
Includes apps that provide sports content such as game results, images,
and short length video.
● Lifestyle
Includes apps that provide lifestyle
media services such as music, personal
photo management tools, and social
networking such as Facebook and
Twitter.
● Information
Includes apps that provide information
content such as news, financial information, stock quotes, weather, etc.
● Education
Includes apps that provide education
content such as story books, dictionary,
VOD (Video on Demand) for kids etc.
● My Apps
My Apps provides information about
your available App cash coupon and
information about the apps you have
already purchased or installed on your
TV.N You can purchase App cash that you
can use to buy applications through
tv.samsungapps.com.
N Downloaded apps displays the list
of free apps that are installed on the
TV.
● Help
If you have questions about Samsung
Apps, check this section first.
To search for an application in Samsung Apps, follow these steps:
1. On the Samsung Apps screen, select
Search Samsung Apps. The Search
window and keyboard appears.
2. Enter a keyword using your remote.
The keyword should be part of the
name of an application. For example,
enter f-a-c-e to search for Facebook.
3. When done, select OK at the bottom
of the keyboard.
4. Wait until the search result screen displays. After Samsung Apps
displays the results, you can select
an application you want in the search
result screen.
N You can find a keyword in the search
history If you have searched using
that keyword before.
N If you have a keyboard and/or a
mouse connected to your TV, you
can use the mouse to select the
Search Samsung Apps field and the keyboard to type in the keyword.Search
™ → Search
(May not be available, depending on
your country.)
Easily search for and access content
from diverse sources (e.g. applications,
Your Video, AllShare Play)
1. On the Smart Hub, select Search at
the top of the screen or press the
Search button on your remote.
2. If you want to input a search term directly, select Enter search keyword.
entry field A keypad screen appears.
Enter the search term using your
remote.
N If you want to search by category,
select a category below the field
using your remote.
Using the Search function by category
● Your Video
Personalize your movie-watching with a customized video on demand (VOD)
recommendation service.
● Most searched
You can search by selecting a key word
in the key word list. The key word list
displays words you frequently use for
searches.
● Top application
You can search applications and
services in the application list. The
application list displays apps that users download frequently.
● Search history
Lets you delete previously used
keywords from the search history list.
Also, If you select Delete All, you can
delete all your search history.
Using the coloured and function buttons
with Search
● b Refresh
Refresh the Search function.● T Tools
You can set general parameters for the
Search function or delete the search
history.
● R Return
Return to the previous menu.
Using the Tools menu with Search
● General Settings
Keyword recommendation: Turns the
Keyword Recommendation function on or off.
Search area: Sets a search scope. The
default is allowed all application.
To customize a search area, follow
these steps:
1. On the Search screen, open the
Tools menu using your remote.
2. Select General Settings.
3. Select an application in the Search
area. A c mark disappears from the
check box.N When you remove the c mark,
you remove that application from
the search scope. Only checked
applications are included.
4. When done, press the RETURNR
button.
● Search history
Lets you delete previously used
keywords from the the search history
list. Also, If you select Delete All, you
can delete all your search history.To delete a search history keyword,
follow these steps:
1. On the Search screen, open the
Tools menu using your remote.
2. Select Search history.
3. Select a keyword in the Keyword list.
4. Press the E button. The keyword
disappears from the list.Your Video
™ → Your Video
(May not be available, depending on
your country.)
Using this service from Smart Hub, you
can get video recommendation, search
for movies from multiple providers, and
stream or purchase movies. To stream
or purchase movies, you must have the
vendors app installed in Smart Hub.
Depending on the vendor, you may also need a vendor account.
Using the Your Video Search Tab
1. On the Smart Hub screen, select
Your Video.
2. If this is the first time you have
accessed Your Video, the Privacy
Notice appears. Read the notice, and
then select Agree.
3. When the Your Video screen appears,
it displays a list of recommended movies with Recommended at the
top of the screen highlighted. Move
the highlight from the top of the
screen down to the first movie, and
then scroll the movies to the right to
view all the movies in the list.
4. To see additional lists of movies,
move the highlight back to the top
of the screen. You can select - in
addition to Recommended - New
releases, Top 20 films, Top 20 TV shows, and From friends.
5. To select a movie, highlight it,
and then press the E button. The
movie's Data screen appears. On
this screen you can view Basic
Information, Director/Cast, Photos,
Awards, and Related Movies.
6. To watch the movie, select Watch. A
list of online vendors that have the
movie available for rent or purchase
appears. Renting usually means you can stream the movie for a certain
number of hours or days.
N To go to a vendor's web site,
you must have that vendor's app
installed in Smart Hub. To install
apps, access Samsung Apps on
the main Smart Hub screen.
7. You can search for a particular
movie. To search, select { with your
remote. The Search Entry screen and
a keyboard appear.8. Enter the name of the movie into
the Search field. As you enter
characters, the Search function will
display suggestions below. You can
either continue entering characters,
or, if your movie appears, move the
highlight down and select it. The
movie's Data screen appears (See
Steps 5 and 6).
N If you are entering using a
keyboard, you can either press Enter or you can move the
highlight down using the down
arrow key.
Using the Function and Coloured
Buttons on the Search Tab
● a Login / Logout
To login to your Smart Hub account or
log out.
● { Search
To search for movies or videos (Steps 7 and 8).
● T My Page
Displays your My Video Bookmarks,
Likes/Shares (if you have a Facebook
or Twitter account registered in Smart
Hub), and lets you establish certain
Preferences.
● R Return
Return to the previous menu.
Using Function and Coloured Buttons on a Movie's Data Page
● a Login / Logout
● To log in to your Smart Hub account
or log out.
● b Bookmark / Unbookmark
To bookmark a movie or video or
to remove the bookmark. When you
bookmark, Bookmark appears on the
left side of the screen. Bookmarked
movies or videos are listed on My
Page.● { Search
To search for movies or videos (Steps
7 and 8).
● } Home
To go to the My Video Home screen.
● T My Page
Displays your My Video Bookmarks,
Likes/Shares (if you have a Facebook
or Twitter account registered in
Smart Hub), and lets you establish
certain Preferences.● R Return
Return to the previous page or menu.
Using the Your Video Genre Tab
When you start Your Video, the Your
Video screen displays the Search tab.
You can also display the Genres tab
which sorts movies and videos by
genre.
1. On the Your Video Search tab, move
the highlight to the bottom of the screen, and then select Genres. The
Genres tab appears.
2. On the Genres tab, select either
Movies or TV show on the left side
of the screen.
3. On the right side of the screen,
select the genre (Action/adventure,
Animated, etc.). Your Video displays
the Genre Movie or TV Show List
screen with the movies or TV shows
in the genre you selected.4. Highlight a movie or TV show and
then select it. The Data screen for
that movie or TV show appears.
Using the Function and Coloured
Buttons on a Genre Movie or TV Show
List Screen
● a Login / Logout
To log in to your Smart Hub account
or log out.
● b GenresTo re-display the Genres tab.
● { Search
To search for movies or videos.
● } Sort
To sort movies or videos by Ratings,
Year, or Title.
● T My Page
Displays your My Video Bookmarks,
Likes/Shares (if you have a Facebook
or Twitter account registered in
Smart Hub), and lets you establish certain Preferences.
● R Return
Return to the previous page or menu.
Using My Page
My Page displays your My Video
Bookmarks, Likes/Shares (if you
have a Facebook or Twitter account
registered in Smart Hub), and lets you
establish certain Preferences. When
the T My Page icon is displayed at the bottom of a screen, select or press
T. My Page appears displaying your
bookmarked movies and videos. Select
a bookmarked movie or video, access
your Likes/Shares, or view or change
your Preferences.
Using the Function and Coloured
Buttons on the My Video Screen
● a Login / Logout
To log in to your Smart Hub account or log out.
● { Search
To search for movies or videos.
● } Home
To go to the My Video Home screen.
● R Return
Return to the previous page or menu.Family Story
™ → Family Story
Family Story feature allows you to
share photos, messages, and events
with your family.
● Create Group
If you are starting Family Story for
the first time, you can create a family
group and invite members to join.
● Invite Members
After creating a group, you can invite the family members who you want to
share your family's photos and events
with to join.
● Join Group
If you were invited to join a family
group by a family member, you can
select Join Group to enjoy Family Story
services.
N You must be logged into your Smart
Hub account to create a family
group, access your group, or use Family Story.
To create a family group, follow these
steps:
1. On the Smart Hub screen, select
Family Story. The Family Story
screen appears.
2. Select Create Group. The Create and
invite pop-up appears.
3. Select OK. The Family Story
agreement appears. Read the agreement, and then select Agree.
N It is required to agree with the
terms prior to using Family Story.
4. Enter a Group Name, Your Name, and
Your Phone Number without dashes
using your remote.
N If you want to add a group image,
select an image box. (An external
device containing photos must be
connected to your TV via USB.)
N * Fields marked with an asterisk are required.
5. When done, select Done. The group
creation is completed.
N If you want to invite members to
your group, select Invite Members.
If you want to go your Family
Story, select Go to Family Story. If
you selected Invite Members, go
to Step 4 in the procedure below.
To invite members to your Family Story group, follow these steps:
1. From the starting menu in Family
Story, open the Tools menu using
your remote, and then select Group
Members. The Group Members
screen appears.
2. Select Invite Members. The Invite
pop-up appears.
3. Select OK. The Invite Members
screen appears.
4. Select Select to enter message.. The keypad screen appears.
5. Enter message using your remote.
When finished, select OK on the
bottom of the keyboard, and then
select Done.
6. Select Phone number or Samsung
account ID. The keypad screen reappears.
7. Enter the prospective member's
phone number or Samsung account
ID using your remote. When finished, select OK on the bottom of the
keyboard, and then, select Done.
N If you want to add more
prospective members, select
Add Member, and repeat Steps 4
through 7.
8. When finished adding members,
select Done. The Member Invitation
Completed screen appears.
9. If invited by phone number, 4-digit
invite code will be generated and the code needs to be shared with
the member. If invited by Samsung
Account, the member will be notified
about the invitation via e-mail. Select
OK to finish.
To join a group using the received invite
code, follow these steps:
1. Start Family Story and accept the
terms.
2. You will see a pop-up message asking about invitation type. If
you were invited by phone number,
please select Invite Code. If you were
invited by Samsung account, please
select Samsung Account.
3. If joining by Samsung Account, a
list of invitations from your family
groups will be displayed. Select
Accept to join. You can select Deny
if you don't want to join the inviting
group.4. If joining by Invite Code, first enter
your phone number using your
remote. When done, select Done.
Then you will see a list of invitations
from your family groups. Select
Accept to join. You can select Deny
if you don't want to join the inviting
group. Enter the 4-digit invite code
shared by your family member, and
then select Done to finish.
5. Select OK. Joining your family group has been completed.
Creating an Album
You can upload pictures from a USB
device and create a picture album
which other group members can view
and add to.
To create a picture album, follow these
steps:
1. Attach a USB device containing the pictures you want to upload to the
picture album to your TV.
2. Log into your Smart Hub account,
and then start Family Story.
3. Highlight and select the "create
album" icon on the left side of the
Family Story screen or select b
Create using your remote. The Create
screen appears.
4. Highlight and select Add on the
Album tab. The File Browser screen appears.
5. Highlight and select the USB device.
The device opens, displaying either
folders or picture files.
6. If picture files are displayed,
highlight and select each file you
want to upload. A check appears on
each file.
7. If folders are displayed, highlight and
select the folder that contains the
pictures you want to upload. Then, select each file you want to upload.
A check appears on each file.
N You can highlight and select the
Select All button on the right side
if you want to select all displayed
pictures.
8. When finished, highlight and select
the OK button on the right side. The
Create screen re-appears displaying
some or all the photos you want to
upload.N To delete a photo from the
upload queue, select T Tools.
In the Tools menu, select Delete
Photos. Either highlight and select
individual photos or select Delete
All. When done, select the Delete
button on the bottom of the page.
A pop-up appears asking whether
you want to delete the photos.
Select Yes.
9. Highlight and select the Done button on the bottom of the screen. The
photos are uploaded, and then the
Story of the Day screen appears,
displaying the photos.
10.Select R Return. The Cover Story
(Main Family Story) screen appears
displaying the photos.
N The Cover Story screen runs a
continuous slide show of photos
you uploaded. It also displays
some of the photos on a "shelf" below the slide show area.
Deleting a Picture
To delete a picture, follow these steps:
1. On the Cover Story screen, highlight
and select the strip of photos on the
bottom left. The Story of the Day
screen appears.
2. Highlight and select the photo you
want to delete.3. Select T Tools.
4. In the Tools menu, select Delete. A
message appears asking if you want
to delete the photo.
5. Select OK. The picture is deleted.
Editing a Picture
The Edit function lets you add a memo
to a picture or add the picture to an
event.To edit a picture, follow these steps:
1. On the Cover Story screen, highlight
and select the strip of photos on the
bottom left. The Story of the Day
screen appears.
2. Highlight and select the photo you
want to edit.
3. Select T Tools.
4. In the Tools menu, select Edit. The
Edit screen appears.
5. To add a memo, highlight and select the "enter Memo" field. The Enter
Memo screen and keyboard appear.
6. To add the picture to an event,
highlight and select Find event.
The Events list screen appears. Use
the left and right arrow buttons to
change the month. Use the up and
down arrow buttons to select an
event. Press Enter when done.
7. After you have added a memo
or added the photo to an event, highlight and select Done on the
bottom of the screen.
Creating a Memo
You can create a memo that all group
members can see.
To create a memo, follow these steps:
1. Log into your Smart Hub account,
and then start Family Story.
2. Highlight and select the "create memo" display on the right side of
the Family Story screen or select b
Create using your remote. The Create
screen appears.
3. On the Memos tab, highlight and
select the "enter Memo" area. The
Enter memo screen and keyboard
appear.
4. Use your remote to highlight and
select letters. If you have a USB
or Bluetooth keyboard attached to the TV, use the Keyboard to type in
letters.
5. When done, select OK on the on
screen keyboard, press the E
button. If you are using a physical
keyboard, press the Enter key on the
key board. The Create screen reappears displaying the memo.
N To edit the memo, highlight and
select the "enter Memo' area
again. The Enter memo screen and key board re-appear.
6. Highlight and select the Done button
on the bottom of the screen. The
Story of the Day screen appears
displaying the memo.
7. Select R Return to go back to the
main Family Story screen.
Deleting a Memo
To delete a memo, follow these steps:1. On the Cover Story screen, highlight
and select the memos on the right
side of the screen. The Story of the
Day screen appears.
2. Highlight and select the memo you
want to delete.
3. Select T Tools.
4. In the Tools menu, select Delete. A
message appears asking if you want
to delete the memo.
5. Select OK. The memo is deleted.Editing a Memo
To edit a memo, follow these steps:
1. On the Cover Story screen, highlight
and select the memos on the right
side of the screen. The Story of the
Day screen appears.
2. Highlight and select the memo you
want to edit.
3. Select T Tools.4. In the Tools menu, select Edit. The
Edit screen appears.
5. Highlight and select the Edit field.
The Memo screen and keyboard
appears. Edit the memo, and then
press Enter when done.
6. The Edit screen re-appears. Highlight
and select Done on the bottom of the
screen.
Creating an EventYou can create a record of an event,
such as a birthday party or a wedding,
with pictures, that all group members
can see. You can also create a record
for a future event.
To create an event, follow these steps:
1. Attach a USB device containing the
pictures of the event that you want
to upload to your Family Story.
2. Log into your Smart Hub account, and then start Family Story.
3. Highlight and select the "create
event" display on the right side of
the Family Story screen or select b
Create using your remote. The Create
screen appears.
4. On the Event tab, highlight and select
the Event title field. The Event Title
screen and keyboard appear.
5. Use your remote to highlight and
select letters. If you have a USB or Bluetooth keyboard attached to
the TV, use the keyboard to type in
letters.
6. When done, select OK on the on
screen keyboard, press the E
button. If you are using a physical
keyboard, press E on the keyboard.
7. Highlight and select Done on the
Event Title screen with your remote.
The Event Tab reappears.
8. User your remote to highlight and select the "Enter Description" field.
The Enter Description screen and
keyboard appear.
9. Enter a description of the event the
same way you entered the Event
Title in Step 5. When done, close
the Enter Description screen the
same way you closed the Event Title
screen in Steps 6 and 7.
10.Highlight and select the From field.
The Time Settings screen appears. Use the up and down arrow buttons
on your remote to change the values
in each field. Use the left and right
arrow buttons to move from field to
field. Press Enter when done.
11.Highlight and select the to field. The
Time Setting screen appears. Set the
To time the same way you set the
From time in Step 10.
12.To define the Event Type, highlight
and select the Change button. The Event Type list appears.
13.Use the up and down arrow buttons
on your remote to select an event
type. When done, press the E
button. The Event Tab re-appears.
14.To add photos, highlight and select
the Add button. The File Browser
appears.
15.Highlight and select the USB device.
The device opens, displaying either
folders or picture files.16.If picture files are displayed,
highlight and select each file you
want to upload. A check appears on
each file.
17.If folders are displayed, highlight and
select the folder that contains the
pictures you want to upload. Then,
select each file you want to upload.
A check appears on each file.
N You can highlight and select the
Select All button on the right side if you want to select all displayed
pictures.
18.When finished, highlight and select
the OK button on the right side. The
Event Tab re-appears displaying
some or all the photos you want to
upload.
N To delete a photo from the
upload queue, select T Tools.
In the Tools menu, select Delete
Photos. Either highlight and select individual photos or select Delete
All. When done, select the Delete
button on the bottom of the page.
A pop-up appears asking whether
you want to delete the photos.
Select Yes.
19.When done entering all information
and selecting all photos, highlight
and select the Done button at the
bottom of the Event Tab. Family
Story uploads the photos you selected and then displays the Story
of the Day screen.
20.Select R Return to go back to the
main Family Story screen.
Deleting an Event
To delete an event, follow these steps:
1. On the Cover Story screen, highlight
and select the events on the bottom
right side of the screen. The Story of the Day screen appears.
2. Highlight and select the event you
want to delete.
3. Select T Tools.
4. In the Tools menu, select Delete. A
message appears asking if you want
to delete the event.
5. Select OK. The event is deleted.
Editing an EventTo edit an event, follow these steps:
1. On the Cover Story screen, highlight
and select the events on the bottom
right side of the screen. The Story of
the Day screen appears.
2. Highlight and select the event you
want to edit.
3. Select T Tools.
4. In the Tools menu, select Edit. The
Edit screen appears.
5. Edit the elements in the event in the same fashion you first entered them.
6. To remove a photo, highlight the
photo, and then Select T Tools.
7. In the Tools menu, select Disconnect
photos.
8. Highlight and select individual photos
or highlight and select Select All.
9. Highlight and select Delete. A
message appears asking if you want
to delete the photos. Select Yes.
10.When finished editing, highlight and select Done at the bottom of the
page.
Functions on the Cover Story (Main) Screen
On the Cover Story screen, you can
launch a slide show, display individual
pictures, view memos, and view events.
Launching a Slide Show
1. On the Cover Story screen, highlight
and select the large Slide Show area.
This is the portion of the screen that displays constantly changing
pictures. The slide show starts. The
slide show controls are displayed
momentarily, then disappear.
2. To stop or start the slide show and
to re-display the controls, press
Enter on your remote.
3. To view individual pictures, stop the
slide show, and then press the left or
right arrow button on your remote.
4. To change the speed of the slide show, select the πor µ button.
5. To end the slide show, select R
Return.
Viewing Individual Pictures
1. On the Cover Story screen, highlight
and select the strip of photos on
the bottom right. The Story of the
Day screen appears displaying the
individual photos.
2. Highlight and select a photo. The individual photo is displayed.
● To add a comment about the
photo, highlight and select the Add
Comment button or select b Add
Comment. The Comment screen and
keyboard appear.
● To watch a slide show that includes
the picture, highlight and select the
picture. The slide show begins.
● To watch a slide show together with
another member of your group, select { Watch together now. This function
lets you and another member of your
group watch the same slide show
on your own TVs, even if you are
thousands of miles apart.
Viewing Individual Memos
1. On the Cover Story screen, highlight
and select the memos displayed
on the right side. The Story of the
Day screen appears displaying the individual memos.
2. Highlight and select a memo. The
individual memo is displayed.
● To add a comment about the
memo, highlight and select the Add
Comment button or select b Add
Comment. The Comment screen and
keyboard appear.
Viewing Individual Events
1. On the Cover Story screen, highlight and select the events displayed
on the right side. The Story of the
Day screen appears displaying the
individual events.
2. Highlight and select an event. The
individual event is displayed.
● To add a comment about the
event, highlight and select the Add
Comment button or select b Add
Comment. The Comment screen and
keyboard appear.● To watch a slide show of the pictures
saved in the event, highlight and
select the pictures at the bottom left
of the screen. The slide show begins.
The Tools Menu Functions
The Tools Menu appears on most of
the Family Story screens. This section
provides a run down of all the Tools
Menu functions by screen.
Tools Menu Functions on the Cover Story Screen
Group Members: Lists the current group
members and the current prospective
members with invitations.
My groups: Lists the groups you are a
member of. Also lets you access your
groups.
Settings: Lets you edit your profile
information and set whether your group
will allow new content, new members,
new invitations, and issue event reminders.
Logout: Logs you out of Family Story
and your Smart Hub account. Returns
you to the Smart Hub screen.
Create: Takes you to the Create screen
where you can create a photo album,
memo, or event record.
Updates: Lets you know if there is an
update for the Family Story application,
and lets you download and install it.Tools Menu Functions on the Story of
the Day Screen
Filter: Lets you select what to view
on the Story of the Day screen by
category: All, Album, Memos, Event.
View by Member: Lets you view entries
(Albums, Memos, Events) by member.
The rest of the functions - Group
Members, My groups, Settings, Logout,
and Updates - are the same functions
as the Cover Story screen functions.Other Functions on the Story of the
Day Screen
The Story of the Day screen also has
a date filter function on the bottom of
the screen.
Date created / Date Uploaded: You
can sort the items on the Story of
the Day screen by Date created or
Date Uploaded by highlighting and
then selecting the Date created / Date Uploaded slider button.
You can also quickly move to the
month certain items occurred or were
uploaded by selecting a highlighted
number on the monthly number bar.
You can also select a year, and then a
month. When you select a month, Family
Story displays the items that were
uploaded or occurred in that month.Fitness
™ → Fitness
The Fitness application provided by
Smart Hub lets you track and manage
a fitness and exercise programme you
create.
N To use Fitness, you should be logged
in the Smart Hub.
Read these notes before exercising...
N Please warm-up or stretch before exercising.
N Stop exercising immediately if you
feel pain, or dizzy, exhausted, or
short of breath.
Create Your Profile
When you start Fitness for the first
time, you should create your own
profile. On the Fitness screen, select
Create your profile. A pop-up message
appears. Select Create your profile. The Personal Trainer/Create Profile screen
appears.
1. To go to next step, press the right
arrow button. The Name pop-up
appears.
2. Select First Name. The Username
screen and keyboard appear. Enter
your name. When done, Select OK.
3. Select Last Name. The Username
screen and keyboard re- appear.
Enter your last name. When done, Select OK.
4. Press the right arrow button on your
remote. The Gender pop-up appears.
5. Highlight and select your gender.
When you select our gender, you
will see a black dot appear in your
selection.
6. Press the right arrow button on
your remote until the Date pop-up
appears.
7. Enter your birth date using your remote. It will be used to personalize
some parameters for you.
8. Press the right arrow button remote.
The Units pop-up appears.
9. Select your preferred units. The
selected units will be applied
throughout the Fitness app. Move to
the right again. The Height pop-up
appears.
10.Enter your height. This will be used
to calculate your body mass index (BMI). Move to the right again. The
Weight pop-up appears.
11.Enter your weight. This will be used
to calculate your body mass index
(BMI). Move to the right again. The
application calculates your BMI.
12.The creation of your profile is
finished. The TV displays your profile
information and BMI. To start the
Fitness app, select Enjoy Fitness.Using Fitness with categories
● Exercise
Provides information on your exercise
goal, current status and recommended
contents.
● Progress
Provide information on your basic body
profile, exercise progress, achievement
of your goals, etc.
● Edit
Edit lets you change or adjust your fitness goals.
Selecting Exercise Programs
Fitness displays a number of exercise
videos and programs you can use to
help you reach your fitness goals. Each
of these videos and programs must
be downloaded from Samsung Apps.
Videos labeled VOD (Video on Demand)
are part of a group of free exercise
videos. We suggest you download those first.
To download a VOD programme or
video, follow these steps;
1. On the Fitness screen, highlight and
select a program. A message appears
asking you if you want to go to
Samsung apps.
2. Select Yes. The Samsung Apps
screen appears.
N This may take a few minutes.3. If this is the first time you have
download a VOD programme or
video, you will be directed to
download the VOD video app that
lets you download and play all the
VOD exercise videos.
4. Follow the directions on the screen
to download the VOD video app.
5. After the video app has been
downloaded, press RETURNR several
times to go back to the Fitness screen.
6. You can now select and play any of
the VOD videos.
N As you play these videos, Fitness
notes the video you are using and
calculates the number of calories
you have burned, base on the
video.Kids
™ → Kids
The Smart Hubs Kids app provides a
quick app launcher and a recommended
list of kids and education-related
applications and contents your kids can
start easily and quickly. It also provides
management tools that let you control
what your kids can view in the app and
how long they can watch.Using Kids with categories
● Playground
Displays recommended contents and
applications. When you select an
application or content, the TV executes
the application or contents immediately.
N You can add up to 40 items to the
recommended list. See "My choice"
in this section.
N You can edit the contents list. For
more detailed information, refer to "My choice" in this section.
N Most of the content must be
downloaded from Samsung apps. To
download, follow the directions on
the screen. When the download is
complete, press RETURNR repeatedly
until the Kids app reappears. Start
the contents or app by highlighting
and then selecting it.
● Sticker Book
Displays the Sticker Books with the stickers your kids received. Also, it can
be share with your Family Story.
Your kids can receive the sticker
through these methods:
– By User (parent): You can present a
sticker using the Present Stickers
function in the Parents menu.
– Automatically: Kids presents a sticker
while the child is watching content.Creating a Sticker Book
1. If you want to create a new Sticker
Book, select Sticker Book on the
top of the screen, and then Create a
New Sticker Book at the bottom of
the screen. The Create a New Sticker
Book screen appears.
2. Enter the Sticker Book's name using
your remote. When done, select
Next.
3. Select a colour for the Sticker Book. When done, select Next.
4. Check the created sticker book. If
you want to change a name, select
Edit. If you want to change a colour,
select Back.
5. When done, select Done. A new
Sticker Book is created.
N You can create a new sticker book.
Maximum number of books is 10.
N You can check arrived stickers by
highlighting and selecting New Sticker. Only ten new sticker types
are displayed in New Sticker at one
time.
● Browse all
Displays the kids or education-related
applications list and all contents list.
N When you select an application
or contents, if the application or
contents has not been installed
on the TV, the TV displays the
corresponding download screen from the Samsung Apps screen.
To use Browse all, follow these steps:
1. On the Browse all screen, select
a character. The contents for that
character appears on the right.
2. Select the kind of contents you want.
Videos: Displays the video contents
of the corresponding character.
Games: Displays the game contents
of the corresponding character.Stories: Displays the e-book contents
of the corresponding character.
3. The detailed information screen for
the selected contents appears. You
can play the contents, share the
contents with your Family Story, add
the contents to My choice, and give
the contents a rating.
N If you were purchased already, you
can play the contents. If you are
not purchased, you can download the contents in the Samsung Apps.
● Parents
Lets you edit the Playground, give
stickers to your kids, check usage time,
and set the watching limit alarm.
My choice
You can add or delete contents in the
Playground. The Playground displays
the added contents only.
To add or delete contents in the Playground, follow these steps:
1. On the Parents screen, select My
choice. The My choice screen
appears.
N My choice contains content you
added through the Browse all
screen.
2. Select contents you want to add or
delete in the list. A pop-up message
appears.
3. Select Yes.4. The selected contents is added or
deleted.
Present Stickers
When your kids do a good job today,
you can present a sticker to them.
To present a sticker to your kids, follow
these steps:
1. On the Parents screen, select Present
Stickers. The Present Stickers screen appears.
2. Select a sticker you want to present.
A pop-up message appears.
3. Select Yes.
4. Select a sticker book you want to
put the sticker into, and then select
Present.
N If you want to check a sticker
book, select Check Now. You can
check the stickers in the selected
sticker book.5. The sticker is placed in the sticker
book you selected.
History
Lets you check how long your kids
have used the app through a graph.
Also, lets you check how long your
kids have used each video or content
item. Change a date or content title
using your remote.
Set AlarmLets you set how long your kids can
watch. When the time is up, the alarm
window appears.
To set the time your kids can watch,
follow these steps:
1. On the Parents screen, select Set
Alarm. The Set Alarm screen
appears.
2. Select Timer.
3. Select amount of time. The alarm is set.Web Browser
™ → Web Browser
(May not be available, depending on
your country.)
Using this function provided by the
Smart Hub, you can surf the Internet on
your TV.
1. On the Smart Hub screen, select Web
Browser. The Web Browser screen
appears.
2. Surf the Internet in the same way as on a PC.
Using the coloured and function buttons
with the Web Browser
● b Control Panel
Shows or hides the control panel at the
top of the screen.
● { Link Browsing / Pointer Browsing
You can change the cursor to Link
Browsing mode or Pointer Browsing
mode. In Pointer Browsing mode, you use a pointer to select items on the
screen in the same way you use a
pointer on a computer. In Link Browsing
mode, you move a blue rectangle
from link to link on the screen by
pressing the directional keys on your
remote. Pointer Browsing is best if
you have a mouse attached to the TV.
Link Browsing only works if you are
browsing using your remote.
N When you select Pointer Browsing, you cannot use the remote to select
items in the Tools Menu.
N In Pointer Browsing Mode, you can
use the arrow keys on your remote
to move the pointer.
● } PIP
Turns PIP on or off. With PIP on, you
can watch TV while using the Web
Browser.
● T Tools
Displays the Tools menu.Control Panel: Shows or hides the
control panel in the top of the screen.
Link Browsing / Pointer Browsing: You
can change the cursor to Link Browsing
mode or Pointer Browsing mode.
PIP: Turns PIP on or off.
PIP Settings: Lets you select where
the PIP window is displayed on the
screen and which sound source the TV
plays, sound from the main screen (the
browser) or sound from the sub screen (the PIP window).
Add to Bookmark: Add the current
page to your Bookmarks.
Enable Grabbing / Disable Grabbing:
You can move a current web page in
the direction you choose. To move
a web page, select a page, and then
move it in the direction you wish using
your remote.
N Available only when the cursor is set
to Pointer Browsing.● πµ Scroll up/down
You can scroll the page up or down.
● R Return
Close the Web Browser.
Using the Control Panel with Web Browser
The Web Browser has a series of icons
across the top of the screen which
provide a number of useful functions.
With these icons, you can easily
use the Web Browser. The icons are described below, starting with the icon
on the far left of the screen.
● Back
Moves to the previous web page.
N If there is no previous web page, this
icon will not work.
● Forward
Moves to the next web page.
N If there is no next web page, this
icon will not work.
● Refresh / StopRefreshes the current page or stops the
current connection from loading.
● Home Page
Goes to the URL you specified as
you’re the home page.
● Zoom
You can select a zoom level of 50%,
75%, 100%, 125%, 150%, 200%, 300%
and Fit to screen.
● Bookmarks
Displays the Bookmarks screen. You can bookmark the current page or
select a favourite page to visit from
the bookmark list. You can also sort
by Date, Name, or Times Visited. To
sort, select the Sort. When you select
Enter URL, you can enter in a new URL
address directly using your remote or
mouse and bookmark it. When you
highlight a bookmark, the Option button
appear on the right. In the Option popup, you can edit the selected page or delete the selected page from bookmark
list.
Using the Tools menu with Bookmark
● Delete All
Delete all bookmark lists.
● Add to Bookmark
Bookmarks the current page.
● Import bookmarks
You can import a bookmark file
saved on another device such as a PC.
● Export bookmarks
You can export a bookmark file from
your TV to another device connected
to your TV.
● History
Displays the History screen. You can
select a web page to visit in the History
list. You can also sort by Date, Name,
or Times Visited. To sort, select Sort.
When you select Enter URL, you can enter in a new URL address directly
using your remote or mouse. When you
highlight a page, the Option button
appear on the right. In the Option popup, you can delete the selected page
from the history list or add the selected
page to bookmark.
N If you want to delete all entries in the
history lists, open the Tools menu
and then select Delete All.
● URL FieldShows the URL of the current page. If
you select the URL field, the URL popup appears. Using your remote, you
can enter a new URL directly.
● Windows List
Displays list or images of open windows
(the Windows List). You can open new
window from list (using Open new
window), select and access a window
in the list, select and close a window
in the list, or close all windows. When you select Enter URL, you can enter a
new URL address directly using your
remote or mouse. By clicking the Text/
Image button in the upper right of the
screen, you can toggle the Windows
list between text descriptions of open
windows and images of the open
windows.
Using the Tools menu with Windows
List● Open new window
Open a new web browser window.
The new web browser page
automatically displays the home
page.
● Close all windows
Close all the currently opened
windows listed in Windows List.
After closing all windows, the TV
opens a new web browser window
automatically. The new web browser window automatically displays the
home page.
● Search
Lets you search the web. When you
access the Search entry field, the
Search screen appears.
To search the web by word input,
follow these steps:
1. On the Search screen, select the
search engine.2. Select Enter search keyword.. The
keyboard screen appears.
3. Enter the word you want to use as
the keyword using your mouse or
remote. The TV searches using the
keyword and search engine you
selected.
● Share
Share the current web page with your
Family Story.
● OptionsYou can configure the Web Browser
settings.
Configuring the Web Browser Using Options
Move the cursor to the top of the
screen, and then select the Options
icon.
● Reading Tools
Provides an easy-to-read page by
enlarging the main text. Reading Tools
is not available for all pages.● Approved Sites
Allows to restrict your children’s
access to inappropriate web pages.
Therefore, this function allows access
of only the registered web sites.
N Every time you access the Approved
Sites, the PIN screen appears. The
first time you access Approved Sites,
enter the default PIN, 0-0-0-0 using
the numbers keypad on your remote.
You can change the PIN using the Reset password for Approved Sites
function. See below.
Approved Sites feature: Turns the
Approved Sites function on or off.
Reset password for Approved Sites.:
Change the Approved Sites password.
Add current site: Lets you add the
currently displayed web site to the
Approved Sites list.
Manage Approved Sites: Lets you key
in URLs to add to the Approved Sites list and delete sites from the Approved
Sites list.
N If you turn Approved Sites on and
have not added any sites to the
Approved Sites list, you will not be
able to access any Internet sites.
● Private Browsing
Enable or disable the Privacy mode.
When the Privacy mode is enabled, the
browser does not retain the URLs of
sites you visit. If you want to enable Private Browsing, select Yes.
If the Private Browsing function is
running, the “Stop” icon appears in
front of the URL at the top of the
screen. To disable Private Browsing,
select it again when Private Browsing is
enabled.
● PIP Settings
Lets you configure the PIP function.
PIP Position: Select a position for the
PIP sub-picture.Sound: Select the audio source you will
hear - Main or Sub - when PIP is on.
● Web Browser Settings
You can configure Web Browser
options.
Set as homepage: You can set the
home page.
– Most visited: Set the most frequently
visited URL as the home page.
– Current Page: Sets the current page
as the home page.– Bookmarks: Sets the bookmarks URL
as the home page.
– Enter URL: Lets you key in the URL
of the page you want for your home
page. The keyboard works like a cell
phone texting keyboard.
Pop-up block settings: Turns the Popup Block on or off.
Ad Block Settings: You can determine
whether to block advertisements
and select the URLs for which advertisements are blocked.
– Ad Blocker: Turns the Ad Blocker on
or off.
– Block current page: Adds the current
page to the blocked list.
– Manage blocked sites: You can add
a website for which advertisements
will be blocked by directly keying in
the URL, or you can delete a website
from the list.
General: You can delete your personal information.
– Delete history: Deletes the website
history.
– Delete browsing data: Deletes
Internet access information such as
cookies.
– Reset Settings: Reset all web
browser settings to the factory
defaults.
– Hide Menu: Turns the control panel
auto-hide on or off. If you select on, the control panel on the top will be
hidden and only appear when you
move the pointer to the top of the
screen.
Encoding: You can set the Encoding
setting for web pages to Automatic or
Manual.
– Auto select: Turns automatic
Encoding for web pages on or off.
The browser selects the appropriate
encoding format automatically.– Settings: Select an encoding format
from a list of encoding formats
manually. The format is applied to all
pages.
Pointer: You can set the speed of the
cursor when the cursor is set to Pointer
Mode.
– Pointer Speed: Select a pointer
speed.
Browser Information: Displays the
version and copyright information for the Web Browser.Skype
™ → Skype
Skype created a little piece of software
that makes communicating with people
around the world easy and fun.
With Skype you can say hello or share
a laugh with anyone, anywhere. And
if both of you are on Skype, it’s free.
Communicate with people around the
world!
N To use Skype, you need the Samsung TV Camera (sold separately). Other
company’s TV Cameras are not
compatible with Skype on your TV.
N For more information, download the
Skype user’s manual from “www.
samsung.com.”
[Legal Statement]
Due to the various capabilities of
products featuring the Samsung Smart
Hub - Content Service, as well as limitations in the available content,
certain features, applications, and
services may not be available on all
devices or in all territories.
Some features on Smart Hub may
also require additional peripheral
devices or membership fees that
are sold separately. Please visit
http://www.samsung.com for more
information on specific device
information and content availability. The services and availability of content
through Smart Hub are subject to
change from time to time without prior
notice.AllShare Play
™ → AllShare Play
View or play photos, music, and movie
files located on a USB Mass Storage
Class (MSC) device, a PC, or a DLNA
device (a cell phone, for example) on
your TV.
N To view content on a USB device,
you must plug the device into a USB
port on the TV.
N If you want using a USB HDD, we recommend using a USB HDD that
has a power adapter.
N To play content located on your PC
or on a DLNA compatible cell phone,
you must connect your PC and the
TV to your network and download
and install the AllShare network
software on your PC.
Connecting a USB Device
1. Turn on your TV.2. Connect a USB device containing
photo, music and/or movie files to
the USB port on the TV.
3. When a USB device is connected to
the TV, the New device connected.
window appears. Select a category
you want to play among Videos,
Photos and Music.
N The TV may display the files on the
USB device automatically if it is the
only device connected.4. The AllShare Play Music, Photos, or
Videos screen appears. If the USB
device has folders, the TV displays
a list of folders. Highlight and then
select a folder. If the USB device
does not have folders, the TV will
display files or thumbnails.
5. Highlight and then select a file to
view or play.
N To select a different Content
Type or Device Type, press the RETURNR button repeatedly until
the AllShare Play main screen
appears.
N For more information about
playing back files, see the section
of this manual starting with
"Controlling Video Playback".
Read this information before using AllShare
Play with a USB device.Restrictions and Cautions
Before connecting your device to the
TV, please back up your files ensure
against file damage or data loss.
SAMSUNG is not responsible for any
data file damage or data loss.
Connect a USB HDD to the dedicated
USB 1 (HDD 5V 1.0A) port.
Do not disconnect a USB device
while it is being read by the TV.
If you connect a USB device with a USB extension cable, the TV may not
recognize the USB device or read the
files on the device.
If a USB device you connect to the
TV is not recognized, the files on the
device are corrupted, or a file in the
list is not played, connect the USB
device to a PC, format the device,
re-copy the files to the device, and
then try playing again.
If a file you deleted from the PC is still found when you run Smart Hub,
use the “Empty the Recycle Bin”
function on the PC to permanently
delete the file.
If your PC cannot construct a
functional database of saved files
on a USB device because there is no
free space on the USB device, you
may not be able to view any new
files you have added, even though
you have saved these files to the USB device.
Supported Devices
Certain types of USB Digital camera
and audio devices may not be
compatible with this TV.
AllShare Play supports only USB
Mass Storage Class (MSC) devices.
MSC is a Mass Storage Class BulkOnly Transport device. Examples of
MSC include Thumb drives, Flash Card Readers, and USB HDD (USB
HUB are not supported). Devices
should be connected directly to the
TV’s USB port.
If more than 2 PTP (Picture Transfer
Protocol) devices are connected, you
can only use one at a time.
If more than two MSC devices are
connected, some of the devices may
not be recognized.
A USB device that requires high power (more than 500mA or 5V)
may not be supported.
If the TV has no input during the
time set in Auto Protection Time, the
Screensaver will run.
The power-saving mode of some
external hard disk drives may be
released automatically when you
connect them to the TV.
File system and formats The USB function might not work
properly with unlicensed multimedia
files.
MTP (Media Transfer Protocol) is not
supported.
The file system supports FAT16,
FAT32, and NTFS.
AllShare Play supports only the
Sequential jpeg format. It does not
support the Progressive jpeg format.
The higher the resolution of the image, the longer it takes to display
on the screen.
The maximum supported JPEG
resolution is 15360 X 8640 pixels.
If a file is corrupted or the TV does
not support the file type, the Not
Supported File Format. message
appears.
If the files are sorted by Folder view,
the TV can display the names of up
to 1000 files in each folder. If the number of files and folders
saved on a USB storage device is
over approximately 8000, some files
and folders may not appear and
some folders may not be unopenable.
The TV cannot play MP3 files with
DRM that have been downloaded
from a for pay site. Digital Rights
Management (DRM) is a technology
that supports the creation,
distribution, and management of digital content in an integrated
and comprehensive way, including
protecting the rights and interests of
content providers, preventing illegal
copying of contents, and managing
billings and settlements.
Even if a file you want to play is
encoded in a supported format, an
error message may appear due to a
sub container or profile problem.Connecting to a PC through a network
You can play pictures, music, and
videos located on your PC through a
network connection using AllShare
Play.
N For more information on how to
configure your TV and connect it to
your network, refer to “Setting up
the Network” in this manual.
N To view content located on your
PC, you must have connected your TV and your PC to your LAN and
downloaded and installed AllShare
PC Software on your PC.
N We recommend you locate both
your TV and PC in the same
network subnet. IP addresses have
four parts, separated by periods
(111.222.333.444). If your TV and PC
are in the same subnet, the first 3
parts of the TV IP address and the
PC IP address (111.222.333) will be the same and only the last part (the
host address) will be different.
The following AllShare Play functions
are not supported when you are playing
media from a PC connected through a
network:
N The Background Music and
Background Music Setting functions.
N Sorting files by preference in the
Photos, Music, and Videos folders.
– The † (REW) or … (FF) function while a movie is playing.
Additional Notes
N DivX DRM is not supported.
N Set your PC firewall programme
so that AllShare PC Software is a
permitted programme.
N Depending on the Internet server,
when you use AllShare Play through
a network connection:
– The sorting method may vary.– The Scene Search function may
not be supported.
– The Resume function, which
resumes playing of a video, may
not be supported.
– The Resume function does
not support multiple users. (It
memorizes only the point where
the most recent user stopped
playing a video.)
– The search function may not work depending on the content
information.
N You may experience file stuttering
while playing a video in AllShare
Play through a network connection.
You can play the content in the Web storage
on TV. Follow the instructions below:
– Enter the AllShare Play service
on TV → Select a content type of
Music, Photos, and Videos → Select SugarSync → Select a file to play
– Visit www.sugarsync.com and you
can upload PC contents to the Web
stroage (SugarSync). However, you
can use the TV to play the content
in the PC only where the uploading
path is Web Archive -AllShare Play -
Music / Photos / Videos.
– You can also use the TV to play the
content in a AllShare Play -enabled
mobile device where the uploading path is specified as above.Using the AllShare Play
AllShare Play enables you to enjoy the
following services. You need to log in
to your Samsung account to use web
storage or social services.
AllShare Play can play various contents
in three ways:
– Using USB Device: You can play
videos, photos, or music from a
connected USB device.
– Using DLNA or Web storage: You can play various contents from devices
connected to your home network or
web storage.
– Using Social Services: You can play
some content from social services
such as Family Story, Facebook or
Picasa.
N Before using Facebook or Picasa, it
should be installed in the Smart Hub.
N To use SugarSync, Facebook,
or Picasa, you should log in to corresponding application.
Alternatively, you can register your
application account in to your
Samsung account. To register
your application account, refer to
"Configuring the Smart Hub with
Settings" in the Smart Hub section.
N To use Family Story, you should log
in to your Samsung account. Before
using Family Story, you should join a
group at least one more.N You can transfer a desired content to
other device connected to the TV.
Contents Type Supported transfer device
USB DLNA, SugarSync, Family
Story, Picasa, Facebook
Camera DLNA
DLNA USB
SugarSync USB
Family Story USB
Picasa USB
Facebook USB
Mobile device USBMy list (In AllShare Play)
™ → AllShare Play → My list
Using this function, you can access
content easily and quickly.
● Recently played
Displays a list of recently played video,
photo or music files. If you have a file
you want to play again, use this list.
N When you play a file from the
Recently played list, and the USB
device is not connected or the file is not found, the "Unable to find the
file." message appears.
N The Recently played list can have up
to 48 files. The files are arranged so
that the most currently played files
are at the top of the list.
N Recently played files located on a
mobile phone may not play.
● What's new
Displays newly saved videos, photo,
or music files on a connected USB device or your PC. If you have a newly
updated file you want to play, use this
category.
● Playlist
Displays the Playlist files saved on the
USB device or your PC. If you want to
play a playlist, select the playlist. The
selected playlist plays immediately.
N You can create up to 12 playlists.
N You can add up to 100 files to a
single playlist.N You can only add one type of
content to a single playlist. For
example, you can only add music
files to a playlist that includes music
files.
Creating a Playlist
1. On the AllShare Play main screen,
select Videos, Photos, or Music on
the left side of the screen.
2. On the right side of the screen, highlight and select the device that
has the files you want in the playlist.
AllShare Play displays the folders
and/or files on the device.
3. If AllShare Play is displaying folders,
highlight and select the folder that
contains the files you want. If it is
only displaying files, go to Step 4.
4. Highlight a file, and then open the
Tools menu using your remote,
5. Highlight and select Add to Playlist.6. Highlight and select a file you want
to add. The c mark appears in the
check box.
7. Repeat Step 6 to select additional
files.
N To select all the files in the list,
select Select All. To cancel a
selection, select the file again.
8. When done, select Add. The Add to
Playlist screen appears.
9. Select Create new. The Create a new playlist. screen appears.
10.Enter playlist name using your
remote or accept the default name.
11.When finished, Select Done. The new
playlist is created. The Added popup appears.
12.Select Play to play now or OK to
play later.
To add music files a playlist, follow
these steps:1. On the AllShare Play main screen,
select Videos, Photos, or Music on
the left side of the screen.
N You must select the kind of
content that is already in the
playlist. For example, if you want
to add files to a music playlist,
you must select Music.
2. On the right side of the screen,
highlight and select the device that
has the files you want in the playlist. AllShare Play displays the folders
and/or files on the device.
3. If AllShare Play is displaying folders,
highlight and select the folder that
contains the files you want. If it is
only displaying files, go to Step 4.
4. Hiighlight a file, and then open the
Tools menu using your remote,
5. Highlight and select Add to Playlist.
6. Highlight and select a file you want
to add. The c mark appears in the check box.
7. Repeat Step 6 to select additional
files.
N To select all the files in the list,
select Select All. To cancel a
selection, select the file again.
8. When done, select Add. The Add to
Playlist screen appears.
9. Highlight and select the playlist you
want to add the files to. The Added
pop-up appears.10.Select Play to play now or OK to
play later.
Using Play Selection with music files
1. Highlight a music file in the file list.
2. Open the Tools menu using your
remote, and then select Play
selection.
3. Select the track you want to add. A
c mark appears in the check box on
the left.4. Repeat Step 3 to select additional
tracks.
N To select all the files in the list,
select Select All. To cancel a
selection, select the file again.
5. Select Play. The selected music files
play.
Using View with Music files
When you use the AllShare Play
function with your Web storage rather than a USB device, View is not
supported.
1. To sort files in the file lists, select }
using your remote. The View screen
appears.
2. Select sort criteria you want.
● Folder view
Displays the folders on the device
in alphabetical order. To view the
file names and thumbnails, select a
folder.● Title
Sorts and displays the files by title
in Symbol / Number / Alphabet /
Special order.
● Artist
Sorts the music files by artist in
alphabetical order.
● Album
Sorts the music files by album in
alphabetical order.
● GenreSorts the music files by the genre.
Send your music files
Lets you send your music files to your
Web storage or other devices.
N To use the Send Function, you must
be logged in to Smart Hub.
1. To send music files in the file list,
open the Tools menu using your
remote, and then select Send.
2. Select a music file you want to send. The c mark appears in the check
box.
3. Repeat Step 2 to select additional
tracks.
N To select all the files in the list,
select Select All. To cancel a
selection, select the file again.
4. When done, select Send. The Send
screen appears.
5. Choose the destination device to
send, and then select Send.6. From these steps, please follow the
instructions on the screen.
To delete one or more files in the
Playlist, follow these steps:
1. On the AllShare Play main screen,
select My list.
2. In the Playlist area at the bottom of
the screen, highlight the playlist you
want to edit.
3. Open the Tools menu using your remote, and then select Edit playlist.
The Edit playlist screen appears.
4. Select a file you want to delete. The
c mark appears in the check box.
5. Repeat Step 5 to select additional
files.
N To select all the files in the list,
select Select All. To cancel a
selection, select the file again.
6. When done, select Remove. A popup message appears.7. Select Yes. The selected file(s) has
been removed from the playlist.Videos (In AllShare Play)
™ → AllShare Play → Videos
You can play video files saved on USB
device and/or your PC.
N For more information about the
subtitle formats and codec formats,
refer to "Supported Subtitle and
AllShare Play file formats" in the
Other Information section.
Playing a Video1. On the AllShare Play screen, select
Videos.
2. Highlight and select the device you
want to play.
3. If AllShare Play displays folders,
highlight and select the folder that
contains the file you want, then go
to Step 4. If AllShare Play displays
files only, go directly to Step 4.
4. Highlight and select the desired video
on the file list screen.N If you stop the video while it is
playing, you can play the video
later from the point where you
stopped it.
N The file name appears on the top
of the screen with the video's
playing time.
N If video time information is
unknown, the playing time and
progress bar are not displayed.Video playback control buttons
● †, …
Each time you select † or … using
your remote, the playback speed
change as follows. († 1 / † 2 / † 3 /
… 1 / … 2 / … 3)
● l, r
Jump to backward or forward from
current position.
● ∑
Pause the scene.– For Slow Motion: In pause mode,
select …. Each time you select …
using your remote, the playback
speed is reduced in this order „
1/8 / „1/4 / „1/2. The playback
speed is displayed in the upper
left corner.
– For Step Mode: In pause mode,
select ∑. Each time you select ∑
using your remote, a new frame
will be appear.N To return to normal speed
playback, select r using your
remote.
N The product does not play sound
in Step mode or Slow Motion.
N Slow Motion and Step Mode
operate only in the forward
direction.
Using the Tools menu with Videos
● On the file list screen, you can use the
following these options:– View
Lets you sort the file list by one of
four sort criteria.
– Play selection
Lets you select one or more files to
play immediately.
– Send
Lets you send your video files to
your Web storage or other devices.
N If you want to use this function,
you must log in to Smart Hub.– Login / Logout
You can login to or logout of your
Samsung Account.
– Add to Playlist
Lets you create playlists. When you
create
playlists, you can play a series of
videos that you want to watch easily
and quickly.
– Go to playlist
Moves to the Playlist screen.– Information
Displays detailed information about
the selected file.
● During playback, you can use the
following options on the Tools menu:
– Go to Videos List
Stops the video and takes you to the
file list screen.
– Play from the beginning
You can restart a video file from the
beginning.– Scene Search
You can use the Scene Search
function during playback to view or
start a movie from the scene of your
choice.
N If the index information in the
file damaged or the file does not
support indexing, you will not
be able to use the Scene Search
function.
– Title SearchYou can search the video using the
left and right arrow keys or input
a playing time directly using your
remote.
– Time Search
Search the video or input the play
time directly using your remote.
– Repeat Mode
You can play a single movie file or
all the files on the play list screen
repeatedly.– Picture Size
Lets you adjust the picture size to
your preference.
– Picture Mode
You can change the Picture Mode.
– Sound Mode
You can change the Sound Mode.
– Audio Language
You can listen to the video in one of
supported languages. The function is
enabled only when you play stream-type files which support multiple
audio formats.
– Subtitle
Lets you view with language
subtitles. You can select a specific
language if the subtitle file contains
multiple languages.
– Subtitle Settings
Displays the Subtitle Settings. You
can select subtitle options such as
colour and transparency.– Information
Displays detailed information about
the selected file.
N The functions available on the Tools
menu at one time depend on the
characteristics of the video you
are playing. All functions are not
necessarily available for all videos.
Using the View function with Video Files
When you use the AllShare Playfunction with your Web storage
rather than a USB device, View is not
supported.
1. To sort files in the file lists, select }
using your remote. The View screen
appears.
2. Select sort criteria.
● Folder view
Displays the folders on the device
in alphabetical order. To view the
file names and thumbnails, select a folder.
● Title
Sorts and displays the file by title
in Symbol / Number / Alphabet /
Special order.
● Latest Date
Sorts and displays files by the latest
create date.
● Earliest Date
Sorts and displays files by the
earliest create date.Send your video files
Lets you send your video files to your
Web storage or other devices.
N To use Send, you must be logged in
to Smart Hub.
1. To send video files in the file list,
open the Tools menu using your
remote, and then select Send.
2. Select a video file you want to send.
The c mark appears in the check box.
3. Repeat Step 2 to select additional
files.
N To select all the files in the list,
select Select All. To cancel a
selection, select the file again.
4. When done, select Send. The Send
screen appears.
5. Choose the destination device to
send, and then select Send.
6. From these steps, please follow the instructions on the screen.Photos (In AllShare Play)
™ → AllShare Play → Photos
Viewing a photo (or slide show)
N For more information about the
supported image formats, refer to
"Supported Subtitle and AllShare
Play file formats" in the Other
Information section.
1. On the AllShare Play screen, select
Photos.2. On the right side of the screen,
select the device that has the photos
you want to view.
3. If AllShare Play displays folders,
select the folder that contains the
photos you want, then go to Step
4. If AllShare Play displays photo
thumbnails, go directly to Step 4.
4. To start a slide show, select ∂ using
your remote.
N To view another photo manually, press the l or r button.
N During the slide show, all files in
the file list are displayed in order,
starting from the file you selected.
N When viewing a photo file or slide
show, you can add background
music if you have music files on
same device.
N If you select the wrong
background music, you cannot
change the music until the BGM (Background Music) has finished
loading.
Photo playback control buttons
● † / …
The slide show speed change as
follow (Slow, Normal, Fast). The
speed is displayed in the upper right
of the screen.
● l, r
Go to the previous or next photo.● ∫
Return to the file list screen.
● ∂
Start the slide show.
● ∑
Pause the slide show.
Using the Tools menu with Photos
● To use the Tools menu with photos,
you must first highlight a photo file
on the file list screen. After you have highlighted a photo on the file list
screen, you can use the following
options in the Tools menu:
– View
Lets you sort the file list by one of
four sort criteria.
– Play selection
Lets you select one or more files to
play immediately.
– Send
Lets you send your photos with your Family Story account or photorelated application.
N To use Send, you must be logged
in to Smart Hub.
– Login / Logout
You can login to or logout of your
Samsung Account.
– Add to Playlist
Lets you create playlists. When you
create playlists, you can play a series
of photos easily and quickly– Go to playlist
Moves to the Playlist screen.
– Information
Displays detailed information about
the selected file.
● When playing a photo file, you can use
the following options:
– Go to Photos List
Moves to the file list screen.
– Start Slide Show / Stop Slide Show
You can start or stop a slide show. Alternatively, select ∂ to start a slide
show or ∑ to stop a slide show using
your remote.
– Slide Show Speed
You can select the slide show speed
during the slide show. Alternatively,
select † or … using your remote.
– Background Music On / Background
Music Off
You can turn on or turn off
background music.– Background Music Setting
You can set and select background
music when watching a photo file or
slide show.
– Picture Mode
You can change the Picture Mode.
– Sound Mode
You can change the Sound Mode.
N Available only when Background
Music is set to on.
– ZoomYou can zoom into images in full
screen mode.
– Rotate
You can rotate images.
– Information
Displays detailed information about
the selected file.
Using the View function with Photo Files
When you use the AllShare Play
function with Family Story, Facebook, or Picasa rather than a USB device,
View is not supported.
1. To sort files in the file lists, select }
using your remote. The View screen
appears.
2. Select sort criteria.
● Folder view
Displays the folders on the device
in alphabetical order. To view the
file names and thumbnails, select a
folder.● Title
Sorts and displays the files by title
in Symbol / Number / Alphabet /
Special order.
● Latest Date
Sorts and displays files by the latest
create date.
● Earliest Date
Sorts and displays files by the
earliest create date.
● MonthlySorts and shows photo files by
month.
Send your photos
Lets you send your photos with your
Family Story account or to other
devices.
N To use Send, you must be logged in
to Smart Hub.
1. For example, suppose that you want
to send with your Family Story.2. To send photo files in the file list,
highlight a file, open the Tools menu
using your remote, and then select
Send.
3. Select a photo file you want to send.
A c mark appears in the check box
on the left.
4. Repeat Step 3 to select additional
tracks.
N To select all the files in the list,
select Select All. To cancel a selection, select the file again.
5. When done, select Send. The Send
screen appears.
6. Choose the destination device to
send to.
7. Choose the family group to share
with. A pop-up window appears.
8. Enter a message to send to the
family group you selected.
N In the QWERTY keyboard screen is
displayed, you can use a keyboard connected to the TV to enter the
message.
9. When done, select Send.Music (In AllShare Play)
™ → AllShare Play → Music
Playing Music
N For more information about the
supported music file formats, refer
to "Supported Subtitle and AllShare
Play file formats" in the Other
Information section.
1. On the AllShare Play screen, press
the arrow button to select Music.2. Select the device that contains the
files you want to play.
3. If AllShare Play displays folders,
highlight and select the folder that
contains the music files you want,
then go to Step 4. If AllShare
displays only files, go directly to
Step 4.
4. Select the desired music file in the file
list or select ∂ using your remote.
N To move to a previous page, select b using your remote. To move to
the next page, select { using your
remote.
N When the music is playing, you
can fast forward or fast rewind
the music file by selecting † or …
using your remote.
N If the sound is abnormal when you
play MP3 files, adjust the Equaliser
in the Sound menu. (An over
modulated MP3 file may cause a sound problem.)
Music playback control buttons
During playback, you can use additional
functions at the bottom right of the
screen.
● Play / Pause
You can start or pause a music file.
Alternatively, you can select ∂ or ∑
using your remote.
● Repeat ModeYou can play one or all the music
files shown in the file list repeatedly.
● Shuffle Mode
You can play the music files
sequentially or randomly.
● Sound Mode
You can change the Sound Mode.
Using the Tools menu with Music
● To use the Tools menu with Music,
you must first highlight a music file on the file list screen. After you have
highlighted a music file on the file
list screen, you can use the following
options in the Tools menu:
– View
You can sort the file list by one of
four sort criteria.
– Play selection
Lets you select one or more files to
play immediately.
– SendLets you send your music files to
your Web storage or other devices.
N To use Send, you must be logged
in to Smart Hub.
– Login / Logout
You can login to or logout of your
Samsung Account.
– Add to Playlist
Lets you create playlists. When you
create playlists, you can play a group
of music files easily and quickly.– Go to playlist
Moves to the Playlist screen.
– Encoding
You can select an encoding format
from the encoding format list.
– Information
Displays detailed information about
the selected file.Recorded TV (In AllShare Play)
for LED 4500 - 5400 Series : This function is not
supported.
™ → AllShare Play → Recorded TV
(Depending on the country)
To use the recording or Timeshift
function, the connected USB device
must be available for recording. Device
format is recommended to use USB
HDD.
N During the Device formatting, do not disconnect the device while
formatting is in progress. If you
format the device, all files will be
deleted.
N Before formatting your device to
the TV, please back up your files to
prevent them from damage or loss of
data. SAMSUNG is not responsible
for any data file damage or data
loss.To record a current broadcasting programme
Allows you to record a programme
currently being broadcasted.
Set the current time first to use this
function.
1. When you record a broadcast
programme, press the ∏ button on
the remote to record. A pop up
window will appear.
N We recommend using a USB
HDD with at least 5,400 rpm, but a USB HDD of RAID type is not
supported.
N A USB storage device cannot
record until it completes the
Device Performance Test.
N The file systems of the PVR
output (Personal Video Recorder)
and the Camera app are different.
Therefore, you cannot save both
output types on the same USB
device. To make a recording using the PVR and the Camara app, you
have to save the recordings using
different USB ports.
2. Select Length to set up the recording
time, and then select OK.
Playing Recorded TV Programme
1. On the AllShare Play screen, select
Recorded TV.
2. Select the device you want to play.
3. Select the desired recorded TV file in the file list.
N To move a previous page, select
π using your remote. To move a
next page, select µ.
4. Select ∂.
● The selected file is displayed on the top
with its playing time.
Playback control button with Recorded TV
● †, …
Each time select †, … your remote, the playback speed change as follows. (†
1 / † 2 / † 3 / † 4 / † 5 / † 6 / † 7 / …
1 / … 2 / … 3 /… 4 / … 5 / … 6 / … 7 )
● l, r
Jump to backward or forward from
current position.
● ∑
Pause the scene.
– In pause mode, select … using your
remote. Each time select … using
your remote, the playback speed is reduced to „1/8 / „1/4 / „1/2.
– In pause mode, select ∑ using your
remote. Each time the ∑ function is
selected, a new frame will be appear.
N To return to normal speed
playback, select r using your
remote.
N The product does not play sound
in stop mode.
N Stop motion operates only in the
forward direction.Using the Tools menu with Recorded TV
● On the file list screen, you can use the
following these options:
– Play Current Group
Will play the contents of the selected
groups.
– View
You can sort the file list by selecting
sort criteria you want.
– Play selectionYou can play by selecting the desired
music file in the file list.
– Delete
Deletes the file from the list.
– Add to Playlist
Lets you make your own playlist.
When you use the playlist, you can
play music you want to listen easily
and quickly.
– Go to playlist
Moves to Playlist screen. – Lock / Unlock
To enable or disable the lock.
– Device Management
On the device can scan and format.
● The following functions are available
only in selected content item.
– Rename
Change the name of the content.
– Information
Displays detailed information about
the selected file.● During playback, you can use the
following these options:
– Go to Recorded List
Moves to the file list screen.
– Play from the beginning
You can restart a video file from the
beginning.
– Title Search
You can move directly to another
title.
– Time SearchSearch the video or input the play
time directly using your remote.
– Repeat Mode
You can play movie files repeatedly.
– Picture Size
You can adjust the picture size to
your preference.
– Picture Mode
You can change the Picture Mode.
– Sound Mode
You can change the Sound Mode.– Information
Displays detailed information about
the selected file.Timeshift
(Depending on the country)
for LED 4500 - 5400 Series : This function is not
supported.
Using the Timeshift function
If you missed a live broadcast, you can
see from the recorded broadcast using
this feature.
1. When you watch a broadcast
programme, select ∂ using your remote to start the Timeshift
function.
2. If you want to stop the Timeshift
function, select ∫ using your remote.
N The Timeshift mode operates for
a maximum of 90 minutes.
N The Timeshift function is not
supported for analogue channels.
N The Timeshift functions are
disabled for channels locked with
Channel Lock.Before using the Timeshift and a record
function...
Recorded videos are DRM (digital rights
management) protected and cannot be
played on a PC or other TVs. Note that
files saved on the TV cannot be used
after the main board is changed.
NOTE
● We recommend using a USB HDD with at least 5,400 rpm, but a USB HDD of
RAID type is not supported.
● The availability of both recording and
the Timeshift function may differ
depending on picture quality and the
free space on the hard disk drive.
● USB memory stick is not compatible.
● When the Timeshift is used to the
gunwales, the pause may be cancelled.
● When recording is performed by both
the PVR (Personal Video Recorder) function and a device that supports the
HDMI-CEC feature, recording by the
PVR function takes precedence.
● If the USB device has failed the Device
Performance Test, the USB device must
go through the Device Format and
Device Performance Test again before
you record with the Guide or Channel.
● The Timeshift functions can only be
used with a USB storage device that
completed the Device Performance Test.
● If you attempt the recording or
Timeshift function with a device that
did not have the Device Performance
Test, the function will not start.
● If any function that turns off the TV
(Sleep Timer, Off Timer, etc.) is set for
a time that conflicts with recording,
the TV will be turned off once the
recording is complete.
● For the Timeshift operation, the USB device requires 1.5GB of free space.
● The Schedule Recording function
requires 100MB of free space on the
USB device.
● If the free space of the USB device
decreases to less than 50MB while
a Schedule Recording is operating,
the Schedule Recording function is
automatically terminated.
● When both the Schedule Recording
and Timeshift functions are running, and the free space on the USB device
decreases to less than 500MB, only
the Schedule Recording function is
automatically terminated.
● The Timeshift function continues even
after changing the digital channel and
users can watch past programs using
the saved Timeshift data.
– If the TV enters a state where the
Timeshift function is not supported
(application execution, input signal switching, analogue channel change,
etc.), the Timeshift data are not
saved.
● If the TV enters a state where the
Timeshift function is not supported
(application execution, input signal
switching, analogue channel change,
etc.) while the Timeshift function is
running, it is automatically terminated
without an additional message being
displayed.● If a user tunes to a digital channel, the
suspended Timeshift function resumes
automatically.Using the DLNA Function
™ → AllShare Play
You can play media contents including
videos, photos, and music saved on
your mobile phones or the other devices
(such as your PC) by controlling them
on the TV via the network.
For more information, visit
“www.samsung.com” or contact
the Samsung call centre. Mobile
devices may need additional software installation. For details, refer to each
device’s user’s guide.
N If your Samsung TV connects to
a non-Samsung DLNA server, a
compatibility issue may occur during
video playback.
N By connecting your Samsung TV to
a network via AllShare Play, you can
use Samsung’s original functions as
follows:
– Playback of various video formats (DivX, MP4, 3GP, AVI, ASF, MKV,
etc.)
– Video thumbnail feature
– Bookmark function (to resume
video playback)
– Auto-chaptering (scene
navigation)
– Digital content management
– Compatibility with various subtitle
formats (SRT, SMI, SUB, TXT,
TTXT)– Search with file names
– And many others
N To use the original DLNA functions
of Samsung fully, it is recommended
that you use the AllShare Play
software provided in your TV.
AllShare Settings
Menu → Network → AllShare Settings
Shows a list of mobile phones or
connected devices which have been set up to use AllShare Settings with this
TV.
N The AllShare Settings function is
available in all devices which support
DLNA DMC.
● Allowed / Denied: Allows / Blocks the
devices.
● Delete: Deletes the devices from the
list.
N This function only deletes the name
of the device from the list. If the deleted device is turned on or tries to
connect to the TV, it may appear on
the list again.
To play the media contents of the
devices connected to DLAN function,
follow these steps:
1. On the AllShare Play screen, select
the kind of content you want to play:
Videos, Photos, Music.
2. On the right side of the screen, select DLNA. The TV displays the
list of devices connected using the
DLNA function.
3. Select a device. AllShare displays
the accessible files or folders on the
device.
4. Select a file in the file list. The
selected file will play.
Playing media contents saved on DLNA
devices1. Connect the mobile phone or other
devices which support AllShare Play
function.
2. Play media contents on the device. A
popup screen appears on the bottom
of your TV.
3. Select Allow to accept the connected
device. The media contents of the
device can now play on your TV.
N You can find the allowed devices
on AllShare Settings.N An alarm window appears informing
you that media contents (videos,
photos, music) sent from a mobile
phone will be displayed on your
TV. The contents are played
automatically 3 seconds after the
alarm window appears.
– If you close the alarm window
using your remote when the
alarm window appears, the media
contents are not played.N The first time a device accesses your
TV through the media function, a
warning pop up window appears.
Select Allow. This permits the phone
to access the TV freely and use the
Media function to play content.
N To turn off media contents
transmissions from a mobile phone,
set the device to Denied in the
AllShare Settings.
N Contents may not play on your TV depending on their resolution and
format.
N Some buttons may not work
depending on the type of media
content.
N Using the mobile device, you can
control the media play. For details,
refer to each device’s user’s guide.Anynet+ (HDMI-CEC)
Menu → System → Anynet+ (HDMI-CEC)
Anynet+ is a function that enables
you to control all connected Samsung
devices that support Anynet+ with your
Samsung TV’s remote. The Anynet+
system can be used only with Samsung
devices that have the Anynet+ feature.
To be sure your Samsung device
has this feature, check if there is an
Anynet+ logo on it.N You can only control Anynet+
devices using the TV’s remote
control, not the buttons on the TV.
N The TV remote control may not work
under certain conditions. If this
occurs, reselect the Anynet+ device.
N The Anynet+ functions do not
operate with other manufacturers’
products.
N For instructions explaining how to
connect Anynet+ external devices, refer to the device’s user manual.
You must connect an Anynet+ device
using an HDMI cable. Some HDMI
cables may not support Anynet+
functions.
N Anynet+ works when the AV device
supporting Anynet+ is in the standby
or on status.
N Anynet+ supports up to 12 AV
devices in total. Note that you can
connect up to 3 devices of the same type.
N However, you can connect only one
Anynet+ Home Theatre. To connect
an Anynet+ Home Theatre, connect
the Home Theatre to the TV using an
HDMI cable then:
– To hear sound from the Home
Theatre’s front, left and right
speakers and the subwoofer only,
connect a digital optical cable
between the DIGITAL AUDIO OUT (OPTICAL) port on your TV and
the Digital Audio Input on the
Home Theatre.
– To hear 5.1 channel audio, connect
HDMI cables to your Anynet+ DVD
player, satellite box, etc. Then,
connect the DIGITAL AUDIO OUT
(OPTICAL) port on your DVD
player, Satellite Box, etc. (i.e.
Anynet+ Device 1 or 2) directly to
the Home Theatre, not the TV.Anynet+ (HDMI-CEC) Menu
TOOLS → Anynet+ (HDMI-CEC)
The Anynet+ menu changes depending
on the type and status of the Anynet+
devices connected to the TV.
● View TV
Change from Anynet+ mode to TV
broadcast mode.
● Device List
Shows the Anynet+ device list.● (device_name) Menu
Shows the menu of the connected
device. E.g. if a DVD player is
connected, the disc menu of the DVD
player will appear.
● (device_name) Tools
Shows the Tools menu of the
connected device. E.g. if a DVD
player is connected, the Tools menu
of the DVD player will appear.
N Depending on the device, this menu may not be available.
● (device_name) Title Menu
Shows the title menu of the disc in
the connected device. E.g. If a DVD
player is connected, the title menu
of the movie in the DVD player will
appear.
N Depending on the device, this
menu may not be available.
● Receiver
Sound is played through the receiver.Setting up Anynet+ (HDMI-CEC)
● Anynet+ (HDMI-CEC)
To use the Anynet+ Function, Anynet+
(HDMI-CEC) must be set to On.
N When the Anynet+ (HDMI-CEC)
function is disabled, all the Anynet+
related operations are deactivated
● Auto Turn Off
Set an Anynet+ Device to turn off
automatically when the TV is turned off.
N If Auto Turn Off is set to Yes,
running external devices will turn off
at the same time as the TV powers
off.
N May not be enabled depending on
the device.
● Receiver
You can listen to sound through a
receiver (i.e. Home Theatre) instead of
the TV Speaker.Switching between Anynet+ Devices
1. Open the Tools menu using your
remote, and then select Anynet+
(HDMI-CEC).
2. Select Device List. The Device List
screen appears.
N If you cannot find a device you
want, select Refresh to refresh the
list.
3. Select a device, and then wait until the switch to the selected device is
completed.
N The Device List menu appears
only when you set Anynet+
(HDMI-CEC) to On in the System
menu.
N Switching to the selected device
may take up to 2 minutes. You
cannot cancel the switching
operation while switching is in
progress.N If you have selected an Anynet+
device using the Source function,
you cannot use the Anynet+
function. Make sure to switch
to an Anynet+ device using the
Device List function. (TOOLS →
Anynet+ (HDMI-CEC) → Device
List)
Listening through a Receiver
You can listen to sound through a receiver (i.e. Home Theatre) instead
of the TV Speaker. To listen to sound
through a receiver, go to Receiver
screen (System → Anynet+ (HDMICEC) → Receiver). Then select Receiver
and set to On.
N If your receiver supports audio
only, it may not appear in the
device list.
N The receiver will work when you
have properly connected the optical in jack of the receiver to
the DIGITAL AUDIO OUT (OPTICAL)
port of the TV.
N When the receiver (i.e. Home
Theatre) is set to on, you can
hear sound output from the TV’
s Optical jack. When the TV is
displaying a DTV (air) signal, the
TV will send out 5.1 channel sound
to the receiver. When the source
is a digital component such as a DVD player and it is connected
to the TV via HDMI, you will hear
only 2 channel sounds from the
receiver.
Using the ARC function
for LED 6500 Series and above, for PDP TV
You can listen to sound from the TV
through a receiver connected using
an HDMI cable without connecting
a separate optical cable. To listen to sound through a receiver using the ARC
function, go to Receiver screen (System
→ Anynet+ (HDMI-CEC) → Receiver).
Then select Receiver and set to On.
N To use the ARC function, a receiver
which supports the HDMI-CEC and
ARC features must be connected to
the HDMI IN 2 (ARC) port.
N To disable the ARC function,
set the Receiver to Off. Even if
the TV transmits the ARC signal continuously, the receiver will be
blocked from receiving the signal.Troubleshooting
Menu → Support → Self Diagnosis →
Troubleshooting
To view a list of all troubleshooting
items, go to e-Manual home screen
(Menu → Support → e-Manual → Other
Information) or press the SUPPORT
button, and then search a desired item
by selecting a chapter.
Other InformationPicture Quality (Troubleshooting)
First, perform the Picture Test and to
see if your TV is properly displaying
the test image.
(Go to Menu → Support → Self
Diagnosis → Picture Test)
If the test image is properly displayed,
the poor picture may be caused by the
source or signal.
The TV image does not look as good as it did in the store.
If you have an analogue cable / set
top box, upgrade to a digital set top
box. Use HDMI or Component cables
to deliver HD (High Definition) picture
quality.
Many HD channels are up scaled
from SD(Standard Definition)
contents.
Cable / Satellite subscribers: Try HD
stations from the channel lineup. Aerial connection: Try HD stations
after performing Auto Tuning.
Adjust the Cable/Set top box video
output resolution to 1080i or 720p.
Make sure you are watching the
TV at the minimum recommended
distance based on the size and
definition of the signal.
The picture is distorted: macro block error,
small block, dots, pixelization The compression of video contents
may cause picture distortion
especially in fast moving pictures
such as those in sports and action
movies.
A weak or bad quality signal can
cause picture distortion. This is not a
TV issue.
Mobile phones used close to the TV
(cca up to 1m) may cause noise in
the picture on analogue channels.Colour is wrong or missing.
If you’re using a component
connection, make sure the
component cables are connected
to the correct jacks. Incorrect or
loose connections may cause colour
problems or a blank screen.
There is poor colour or brightness.
Adjust the Picture options in the TV menu (go to Picture mode / Colour /
Brightness / Sharpness)
Adjust the Energy Saving option in
the TV menu (go to Menu → System
→ Eco Solution → Energy Saving)
Try resetting the picture to view the
default picture settings (go to Menu
→ Picture → Reset Picture)
There is a dotted line on the edge of the
screen. If the Picture Size is set to Screen
Fit, change it to 16:9.
Change cable / satellite box
resolution.
The picture is black and white.
If you are using an AV composite
input, connect the video cable
(yellow) to the Green jack of
component on the TV.When changing channels, the picture
freezes or is distorted or delayed.
If the TV is connected to a cable
box, try to reset the box. (Disconnect
and then reconnect the AC cord and
wait until the cable box reboots. It
may take up to 20 minutes.)
Set the output resolution of the cable
box to 1080i or 720p.Sound Quality (Troubleshooting)
First, perform the Sound Test to
determine if your TV audio is operating
properly. (Go to Menu → Support →
Self Diagnosis → Sound Test)
If the audio is OK, the sound problem
may caused by the source or signal.
There is no sound or the sound is too low
at maximum volume.
Check the volume setting of the device (Cable/Sat Box, DVD, Blu-ray
etc.) connected to your TV.
The picture is good but there is no sound.
Set the Speaker Select option to TV
Speaker in the Sound menu.
If you are using an external device,
make sure the audio cables are
connected to the correct audio input
jacks on the TV.
If you are using an external device, check the device’s audio output
option (ex. you may need to change
your cable box’s audio option to
HDMI if you have the box connected
to your TV using an HDMI cable.
If you are using a DVI to HDMI cable,
a separate audio cable is required.
If your TV has a headphone jack,
make sure there is nothing plugged
into it.
Reboot the connected device by disconnecting, and then reconnecting
device’s power cable.
The speakers are making an inappropriate
noise.
Check the cable connections. Make
sure a video cable is not connected
to an audio input.
For aerial or cable connections,
check the signal strength. Low signal
level may cause sound distortion. Perform a Sound Test. (Support →
Self Diagnosis → Sound Test)No Picture, No Video (Troubleshooting)
The TV won’t turn on.
Make sure the AC power cord is
securely plugged in to the wall outlet
and the TV.
Make sure the wall outlet is working.
Try pressing the P button on the TV
to make sure the problem is not the
remote. If the TV turns on, refer to
“The remote control does not work” below.
The TV turns off automatically.
Ensure the Sleep Timer is set to Off
in the Setup menu.
If your PC is connected to the TV,
check your PC power settings.
Make sure the AC power cord is
plugged in securely to the wall outlet
and the TV.
When watching TV from an aerial or cable connection, the TV will turn
off after 10~15 minutes if there is no
signal.
There is no picture/Video.
Check cable connections (remove
and reconnect all cables connected
to the TV and external devices).
Set your external device’s (Cable /
Set top Box, DVD, Blu-ray etc) video
outputs to match the connections to the TV input. For example, if an
external device’s output is HDMI,
it should be connected to an HDMI
input on the TV.
Make sure your connected devices
are powered on.
Be sure to select the TV’s correct
source by select Source using your
remote.RF (Cable / Aerial) Connection
(Troubleshooting)
The TV is not receiving all channels.
Make sure the Aerial cable is
connected securely.
Please try Setup to add available
channels to the channel list. Go
to Menu → System → Setup and
wait for all available channels to be
stored. Verify the Aerial is positioned
correctly.
The picture is distorted: macro block error,
small block, dots, pixelization.
The compression of video contents
may cause picture distortion,
especially with fast moving pictures
such as those in sports and action
movies.
A weak signal can cause picture distortion. This is not a TV problem.PC Connection (Troubleshooting)
A “Mode Not Supported” message appears.
Set your PC’s output resolution so it
matches the resolution supported by
the TV.
The video is OK but there is no audio.
If you are using an HDMI connection,
check the audio output setting on
your PC.Network Connection (Troubleshooting)
The wireless network connection failed.
The Samsung Wireless LAN adapter
is required to use a wireless network.
for LED 5500 - 5700 series and PDP 550 - 570
series
Make sure the TV is connected to a
wireless IP sharer (router).Recording / Timeshift (Troubleshooting)
The USB device is not recognized or a
Device Format, Checking Device or Device
Performance Test fails.
See the manual for the USB device
to check that the USB device supports
recording.
If the USB device has a lock, ensure
it is off.
Check that the USB device can be formatted when connected to the
PC. Connect the USB to the TV
and format it. (Formatting may fail
intermittently.)
If a Device Performance Test or
formatting failed, it means that there
is a problem with the USB hardware
or the performance of the USB
hardware is too low.
A message prompts me to format a USB device that has been working well.
If the USB device has a lock, ensure
it is off.
Recover the USB device using the
recovery function in Checking
Device.
The recording function does not work.
Check that a USB device is
connected.
Check that the channel is a recordable digital channel.
If the signal is weak or does not
exist, the recording function will
automatically be closed.
The TV will not record if the USB
device has no free memory space.
Check that this is not the case.
Timeshift Mode does not work.
Check that a USB device is
connected. Radio channels and analogue
broadcasts are not supported.
Data broadcast channels are not
supported.
If the signal is weak or does not
exist, the Timeshift Mode function
will automatically be closed.
Timeshift Mode cannot be performed
if the USB device has no free
memory space. Check that this is not
the case. USB memory stick is not supported.
Please use the USB HDD type.
A message indicates a performance test
failure, and the recording and Timeshift
Mode functions do not work.
These problems may occur if you
use a low-performance USB device
that does not support recording. We
recommend using a USB HDD with
at least 5 400 rpm, but a USB HDD of RAID type is not supported.
A scheduled recording has failed.
A scheduled recording is disabled
for certain operations (formatting,
performance test, error checking,
deleting) that access the file system
of a USB device.
If there is no USB device connected,
the TV will not record even if the
scheduled time is reached. The TV will not record if the USB
device has no free memory space.
Check that this is not the case.
If you record a channel locked with
Programme Rating Lock, the PIN
input window will appear when you
try to play back the recording.
Several recording devices are connected but
the TV stopped recording.
If multiple recording devices are connected and the device set as
Default Recording Device has no
free memory space, the recording
function will be closed. Attempt
recording again. The device with
the most free memory space will
automatically be set as Default
Recording Device and the TV will
start recording.Others (Troubleshooting)
The picture won’t display in full screen.
HD channels will have black bars
on either side of the screen when
displaying up scaled SD (4:3)
contents.
Black bars will appear on the top
and bottom of the screen when you
watch movies that have aspect ratios
different from your TV. Adjust the picture size options on
your external device or set the TV
picture size to full screen.
The remote control does not work.
Replace the remote control batteries
with the poles (+ / –) in the right
direction.
Clean the sensor’s transmission
window on the remote.
Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
doesn’t turn the TV on or off, or adjust the
volume.
Programme the Cable/Set top box
remote control to operate the TV.
Refer to the Cable/Set user manual
for the SAMSUNG TV code.
A “Mode Not Supported” message appears. Check the supported resolution of the
TV, and adjust the external device’s
output resolution accordingly. Refer
to the resolution settings in the User
manual.
There is a plastic smell from the TV.
This smell is normal and will
dissipate in a short time.
The TV Signal Information is unavailable in the Self Diagnosis menu.
This function is only available with
digital channels from an Aerial / RF/
Coax connection.
The TV is tilted to the side.
Remove the base stand from the TV
and reassemble the stand.
There are difficulties assembling the stand
base. Make sure the TV is placed on a
flat surface. It is necessary to use
magnetized screw driver if you
cannot remove the screws from the
TV.
The channel menu is greyed out.
(Unavailable)
The Channel menu is only available
when you select the TV source.Your settings are lost after 30 minutes or
every time the TV is turned off.
If the TV is in the Store Demo
mode, it will reset audio and picture
settings every 30 minutes. Change
the settings from Store Demo mode
to Home Use mode in the Setup
procedure. Select TV in the Source
using your remote, and go to Menu
→ System → Setup.
It is possible to disable the Store Demo via Tools as well. (Tools →
Demo → Off)
You have intermittent loss of audio or
video.
Check the cable connections and
reconnect them.
Loss of audio or video can be
caused by using overly rigid or thick
cables. Make sure the cables are
flexible enough for long term use. If mounting the TV to the wall, we
recommend using cables with 90
degree connectors.
You see small particles when you look
closely at the edge of the frame of the TV.
This is part of the product’s design
and is not a defect.
The PIP menu is not available.
PIP functionality is only available when you are using a HDMI or
components source.
The message “Scramble signal” or “Weak
Signal/No Signal” appears.
If you are using a CAM CARD (CI /
CI+), check that it is installed into the
common interface slot.
If there is still a problem, pull the
CAM CARD out of the TV and insert
it into the slot again.You turned the TV off 45 minutes ago, and
it turned on again.
It is normal. The TV operates the
OTA (Over The Aerial) function itself
to upgrade firmware downloaded
whilst your watching TV.
There are recurrent picture/ sound issues.
Check and change the signal/source.A reaction may occur between the rubber
cushion pads on the base stand and the top
finish of some furniture.
To prevent this, use felt pads on
any surface of the TV that comes in
direct contact with furniture.
You can keep your TV as optimum
condition to upgrade the latest
firmware on web site (samsung.com →
Support → Downloads) by USB.POP (TV’s internal banner ad) appears on
the screen.
Select Home Use under Setup mode.
For details, refer to the Setup Feature.
The Plasma TV is making humming noise.
for PDP TV Plasma TVs typically make
a soft humming sound. This is normal.
It’s caused by the electrical charges
that are used to create the images on the screen.
If the humming sound is loud, you may
have set the brightness on the TV too
high. Try setting the brightness lower.
You can also have loud humming if the
back of your Plasma TV is too close to
a wall or other hard surface. Also, try
rerouting your connection cables.
An improperly installed wall mount can
also create excessive noise.Image Retention (Burn In) Issue.
for PDP TV To minimize the possibility
of screen burn, this unit is equipped
with Pixel Shift screen burn reduction
technology. Pixel Shift lets you set the
picture so it moves slightly up and
down (Vertical Line) and side to side
(Horizontal Dot). The regular, slight
movement of the picture reduces screen
burn in.Anynet+ (HDMI-CEC) (Troubleshooting)
Anynet+ does not work.
Check if the device is an Anynet+
device. The Anynet+ system supports
Anynet+ devices only.
You can connect only one receiver
(home theatre).
Check if the Anynet+ device power
cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI cable connections.
Check whether Anynet+ (HDMI-CEC) is
set to On in the Anynet+ setup menu.
Check whether the TV remote control is
in TV mode.
Check whether the remote control is
Anynet+ compatible.
Anynet+ doesn’t work in certain
situations. (Searching channels,
operating Smart Hub or Setup, etc.)
If you have removed and then reconnected the HDMI cable, please
make sure to search devices again or
turn your TV off and on again.
I want to start Anynet+.
Check if the Anynet+ device is properly
connected to the TV and check if the
Anynet+ (HDMI-CEC) is set to On.
(Menu → System → Anynet+ (HDMICEC))
Open the Tools menu using your remote and then select Anynet+ (HDMICEC). Then select a menu you want.
I want to exit Anynet+.
Select View TV in the Anynet+ menu.
Go to the Source screen using your
remote and select a non- Anynet+
device.
The message Connecting to Anynet+ device
... appears on the screen.You cannot use the remote control
when you are configuring Anynet+ or
switching to a view mode.
Use the remote control after the TV has
completed Anynet+ configuration or
has finished switching to Anynet+.
The Anynet+ device does not play.
You cannot use the play function when
Setup is in progress.The connected device is not displayed.
Check whether or not the device
supports Anynet+ functions.
Check whether or not the HDMI cable is
properly connected.
Check whether Anynet+ (HDMI-CEC) is
set to On. (Menu → System → Anynet+
(HDMI-CEC))
Search Anynet+ devices again.
Anynet+ requires an HDMI connection.
Make sure the device is connected to your TV with an HDMI cable.
Some HDMI cables may not support
Anynet+ functions.
If the connection is terminated because
there has been a power failure or the
HDMI cable has been disconnected,
please repeat the device scan.
The TV sound is not output through the
receiver.
Connect the optical cable between TV and the receiver.
The ARC function enables digital output
of sound using the HDMI IN 2(ARC) port
and can only be operated when the TV
is connected to an audio receiver that
supports the ARC function.AllShare Play (Troubleshooting)
This file may not be playable properly.
This may appear because of the
high bit rate of the content. Content
generally will play but could experience
some playability issue.Smart Hub (Troubleshooting)
Some application contents only appear in
English. How can I change the language?
The Application content language may
be different from the application user
interface language.
The ability to change the language
depends on the service provider.
Some application services do not work.Check with the service provider.
Refer to the help website for application
service provider information.
When a network error occurs, I can only use
the setting menu.
If network connection doesn’t work,
your service might be limited, as all
functions except the setting menu need
to be connect to the internet.Web Browser (Troubleshooting)
1. To open Web Browser, select Web
Browser in Smart Hub. Unlike a PC,
the Web Browser may be displayed
differently.
2. The Web Browser is not compatible
with Java applications.
3. When you attempt to download a
file, and the file could not be saved,
an error message will appear.
4. Access may be blocked to some websites or to web browsers
operated by certain businesses.
5. Playback of Flash video may be
restricted.
6. E-commerce, for purchasing
products online, is not supported.
7. Scrolling a web page that allows
only part (and not all) of the page
to be scrolled may cause corrupted
characters.
8. ActiveX is not supported.9. Some options cannot be accessed
in Link Browsing mode. (To access
such options, switch to Pointer
Browsing mode.)
10.Some text may appear corrupted
because the number of supported
fonts is limited.
11.The response to a command on the
remote or the screen display may be
delayed temporarily if a web page is
currently loading.12.Copy and Paste are not supported.
13.When writing emails or posting
messages, some functions (Such as
changing the size or colours.) may
not be supported.
14.The number of bookmarks and logs
that can be saved is limited.
15.The maximum number of windows
that can open at the same time
may vary depending on browsing
conditions or the TV model.16.The web browsing speed depends on
the network conditions.
17.PIP will automatically be deactivated
if a video is played in the browser.
Videos may not commence playback
after PIP interruption and a possible
refresh for the page may be required.
18.The Web Browser can play MP3
audio files only.
19.The function for importing or
exporting bookmarks is compatible with bookmark files in a particular
file format only. (Compatible format:
Netscape-bookmark-file-1)
20.When you import or export
bookmarks, the folder tree is not
included.
21.If you import the bookmark file to a
Computer from the TV, the bookmark
file will be saved in “Samsung Smart
TV Bookmark” folder.
22.If the time is not set in the menu (Menu → System → Time → Clock),
the history information may not be
saved.
23. Visited web site history is saved
in chronological order and will be
removed from the list by oldest page
accessed.
24.Some video or audio content may
not play during Flash playback
depending on the video/audio codec
supported.25.A sudden change in the picture
brightness inside the video window
may affect the brightness of the
surrounding stationary picture. for
PDP TV
26. Video Content that requires
Flash Player 10.2 or higher is not
supported.Supported Subtitle and AllShare Play file
formats
Subtitle
External
– MPEG-4 timed text (.ttxt)
– SAMI (.smi)
– SubRip (.srt)
– SubViewer (.sub)
– Micro (.sub or .txt)– SubStation Alpha (.ssa)
– Advanced SubStation Alpha (.ass)
– Powerdivx (.psb)
Internal
– Xsub
Container: AVI
– SubStation Alpha
Container: MKV
– Advanced SubStation Alpha
Container: MKV– SubRip
Container: MKV
– MPEG-4 timed text
Container: MKV
Supported image resolutions
File Extension Type Resolution
*.jpg JPG 15360 x 8640
*.png PNG 1920 x 1080
*.bmp BMP 1920 x 1080
*.mpo MPO 15360 x 8640Supported music file formats
File Extension Type Codec Comments
*.mp3 MP3 MPEG1 Audio Layer 3
*.m4a
*.mpa
*.aac
*.3ga
MPEG4 AAC
*.flac FLAC FLAC
The Seek (jump) function is not
supported.
Supports up to 2 channel
*.ogg OGG Vorbis Supports up to 2 channel
*.wma WMA WMA
WMA 9, 10 Pro supports up to 5.1
channel and M2 profile (except LBR
mode of M0).
Video CodecFile
Extension
Container Video Codec Resolution
Frame rate
(fps)
Bit rate
(Mbps)
Audio Codec
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.flv
*.vob
*.svi
*.m2ts
*.mts
*.webm
*.divx
AVI
MKV
ASF
MP4
3GP
VRO
VOB
PS
TS
WebM
DIVX 3.11/4.x/5.x/6.1
1920 x 1080
6 – 30
30
AC3
LPCM
ADMPCM(IMA,
MS)
AAC
HE-AAC
WMA
DD+
MPEG(MP3)
DTS Core
G.711(A-Law,
μ-Law)
MPEG4 SP/ASP
H.264 BP/MP/HP
Motion JPEG 640 x 480 8
Window Media Video
v9
1920 x 1080 30
MPEG2
MPEG1
VP8
VP6 640 x 480 4
Other Restriction
N Video content will not play, or not
play correctly, if there is an error in the content or the container.
N Sound or video may not work if the
contents have a standard bit rate/
frame rate above the compatible
Frame/sec listed in the table above.
N If the Index Table is in error, the Seek
(Jump) function is not supported.
N When you play video over a network
connection, the video may not be
played smoothly.
N The menu may take longer to appear if the video’s bit rate exceeds
10Mbps.
N Some USB/digital camera devices
may not be compatible with the
player.
Video decoder
● Supports up to H.264, Level 4.1.
● H.264 FMO / ASO / RS, VC1 SP / MP /
AP L4 and AVCHD are not supported.
● For all Video codecs except MVC, VP8, VP6:
– Below 1280 x 720: 60 frame max
– Above 1280 x 720: 30 frame max
– GMC is not supported.
● Supports only SVAF Top/Bottom and
Side by Side.
● Supports only BD MVC Spec.
Audio decoder
● WMA 9, 10 Pro supports up to 5.1
channel and M2 profile (except LBR mode of M0).
● WMA lossless audio is not supported.
● If Vorbis is only in WebM container,
supports up to 2 channel.Data Service
Allows the user to use information
(text, still images, graphics, documents,
software, etc.) transmitted via broadcast
media.
Auto Run Data Service (On / Off) for Italy
Menu → System → Auto Run Data Service
Sets whether or not to automatically
run data service. Auto Run Data Service
automatically runs data service without user intervention.
N If any other secondary function is
under way, Auto Run Data Service
may not work.
Using Data Service
If the channel you are currently
watching provides data service, you
can enjoy a variety of data services by
select a using your remote.
N Provided Data Service information may vary depending on broadcast.
N While using data service, changing
the channel using the numeric
functions may not be possible
depending on the service.
1. Select a using your remote. Select a
desired service.
N If Auto Run Data Service is On,
the data service will automatically
run with loading banner. In this
case, the a function does not work.
2. Select a using your remote. The
data service screen will be displayed.
3. Move to a desired option by your
remote control on the data service
screen and then select OK. The
selected service will be started.
N If a Colour function of a certain
function appears on the screen,
you can use the offered function
by select corresponded function.4. If you select EXIT, data service will
be closed.
Main Data Service buttons and their
functions
● a (Data Service)
Displays the Data Service list and
immediately starts Data Service.
● BACK
Returns to the previous screen.
● Colour ButtonPerform functions corresponding to
each Colour button image displayed on
the screen during Data Service.
N Operations may differ depending on
the service provider.
● Symbol
Text can be inputted using the numbers
and letters printed on and above the
numeric keys on the remote control.
If you input the numeric keys on the
remote control one by one into the blank where the cursor is located on
the text input screen, the corresponding
lettering, numbers or special characters
will be displayed. e.g., if you press the
number 3 key in rapid succession, then
the assigned letters (D, E, and F) and
the number 3 will alternately appear in
order of input.
● TEXT
Switches to teletext mode or Returns to
the previous screen.N Operations may differ depending on
the service provider.
● u / d / l / r
Moves the Data Service menu up,
down, left and right.
● OK
Runs a selected item.
● EXIT
Stops a running Data Service.HbbTV
(Depending on the country)
You will be able to access services
from entertainment providers, online
providers and CE manufactures through
the HbbTV.
N In some countries, HbbTV is a data
service.
N This service may be supported in
other countries.
N Some broadcasting may not support the HbbTV.
1. HbbTV is turned off by default. To
use HbbTV, go to System → Data
Service and set it Enable. (Depending
on the country)
2. HbbTV is not available when
Timeshift is running or when a
recorded video is being played back.
3. An application on HbbTV may
malfunction temporarily depending
on the circumstances of the broadcast station or application
provider.
4. An application is only available for
use on HbbTV when the TV network
is connected to an external network.
The application may malfunction
depending on the network
conditions.
5. If the current channel is compatible
with both the HbbTV and non-HbbTV
text input modes, activate TTX by select TTX key twice.
● When the screen indicates (with the a,
etc.) that HbbTV is being accessed.
● Select TTX using your remote, once to
enter the HbbTV text-input mode.
● Select TTX using your remote, twice to
enter the non-HbbTV text-input mode.Connecting to a TV Viewing Card slot
To connect the CI CARD Adapter, follow
these steps: for LED 4500~6300 Series and PDP TV
Using the “CI or CI+ CARD”
To watch paid channels, the “CI or CI+ CARD” must be inserted.
● If you don’t insert the “CI or CI+
CARD”, some channels will display the
message “Scrambled Signal”.
● The pairing information containing a
telephone number, the “CI or CI+ CARD”
ID the Host ID and other information
will be displayed in about 2~3 minutes.
If an error message is displayed, please
contact your service provider.
● When the configuration of channel information has finished, the message
“Updating Completed” is displayed,
indicating the channel list is updated.
NOTE
– You must obtain a “CI or CI+ CARD”
from a local cable service provider.
– When removing the “CI or CI+
CARD”, carefully pull it out with your
hands since dropping the “CI or CI+
CARD” may cause damage to it.– Insert the “CI or CI+ CARD” in the
direction marked on the card.
– The location of the COMMON
INTERFACE slot may be different
depending on the model.
– “CI or CI+ CARD” is not supported in
some countries and regions; check
with your authorized dealer.
– If you have any problems, please
contact a service provider.
– Insert the “CI or CI+ CARD” that supports the current aerial settings.
The screen will be distorted or will
not be seen.
To connect the CI CARD Adapter, follow
these steps: for LED 6500 Series and above
N We recommend attaching the adapter
before installing the wall mount, or
inserting the “CI or CI+ CARD”.
1. Insert the CI CARD Adapter into the
two holes on the product 1.
N Please find two holes on the rear
of the TV. Two holes are beside
the COMMON INTERFACE port.
2. Connect the CI CARD Adapter into
the COMMON INTERFACE port on
the product 2.3. Insert the “CI or CI+ CARD”
Warning
We recommend that you insert the CI
card before you mount the TV on a
wall. It may be difficult to insert after
the mounting. Insert the card after
attaching the CI-Module on TV. It is
difficult to attach the module if you
insert the card before attaching.Using the “CI or CI+ CARD”
To watch paid channels, the “CI or CI+
CARD” must be inserted.
● If you don’t insert the “CI or CI+
CARD”, some channels will display the
message “Scrambled Signal”.
● The pairing information containing a
telephone number, the “CI or CI+ CARD”
ID the Host ID and other information will be displayed in about 2~3 minutes.
If an error message is displayed, please
contact your service provider.
● When the configuration of channel
information has finished, the message
“Updating Completed” is displayed,
indicating the channel list is updated.
NOTE
– You must obtain a “CI or CI+ CARD”
from a local cable service provider.– When removing the “CI or CI+
CARD”, carefully pull it out with your
hands since dropping the “CI or CI+
CARD” may cause damage to it.
– Insert the “CI or CI+ CARD” in the
direction marked on the card.
– The location of the COMMON
INTERFACE slot may be different
depending on the model.Teletext Feature
(Depending on the country)
The index page of the Teletext service
gives you information on how to use
the Service. For Teletext information
to be displayed correctly, channel
reception must be stable. Otherwise,
information may be missing or some
pages may not be displayed.
N You can change Teletext pages by
select numeric using your remote control.
/ Teletext on / mix / off: Activates
the Teletext mode for the current
channel. Press the button twice to
overlap the Teletext mode with the
current broadcasting screen. Press it
one more time to exit teletext.
8 Store: Stores the Teletext pages.
4 Size: Displays the teletext on the
upper half of the screen in double-size.
To move the text to the lower half of the screen, press it again. For normal
display, press it once again.
9 Hold: Holds the display at the
current page, in the case that there are
several secondary pages that follow
automatically. To undo, press it again.
Colour buttons (red, green, yellow, blue):
If the FASTEXT system is used by the
broadcasting company, the different
topics on a Teletext page are colourcoded and can be selected by coloured buttons. Press the colour corresponding
to the topic of your choice. A new
colour coded page is displayed. Items
can be selected in the same way. To
display the previous or next page,
select corresponding coloured button.
0 Mode: Selects the Teletext mode
(LIST / FLOF). If pressed during LIST
mode, switches the mode to List save
mode. In List save mode, you can save
a Teletext page into a list using the 8 (store) button.
1 Sub-page: Displays the available
sub-page.
2 Page up: Displays the next Teletext
page.
3 Page down: Displays the previous
Teletext page.
6 Index: Displays the index (contents)
page at any time while you are viewing
Teletext.
5 Reveal: Displays the hidden text (answers to quiz games, for example).
To display the normal screen, press it
again.
7 Cancel: Shrinks the Teletext display
to overlap with the current broadcast.
Typical Teletext pagePart Contents
A Selected page number.
B Broadcasting channel identity.
C Current page number or search indications.
D Date and time.
E Text.
F Status information. FASTEXT information.Anti-theft Kensington Lock
A Kensington Lock is a device you can
use to physically fix your TV in place
when using it in a public place.
You wrap the Kensington Lock’s cable
1
2
around a large, immobile object and
then attach the lock to the Kensington
slot on the back of the TV.
The appearance and locking method
may differ from the illustration below
depending on the manufacturer.
Refer to the manual provided with
the Kensington Lock for additional
information on proper use. The
Kensington Lock is not supplied by
Samsung.N Please find a “K” icon on the rear of
the TV. The Kensington slot is beside
the “K” icon.
To lock the product, follow these steps:
1. Wrap the Kensington Lock cable
around a large, stationary object
such as desk or chair.
2. Slide the end of the cable with the
lock attached through the looped
end of the Kensington Lock cable.3. Insert the locking device into the
Kensington slot on the product.
4. Lock the lock.
N These are general instructions. For
exact instructions, see the User
manual supplied with the locking
device.
N The locking device has to be
purchased separately.
N The location of the Kensington slot
may be different depending on the TV model.Licence
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available
on the product menu.
Open Source Licence Notice is written only English.
DivX Certified® to play DivX® video up to HD 1080p,
including premium content.
DivX®, DivX Certified® and associated logos are
trademarks of Rovi Corporation or its subsidiaries and are
used under licence.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274TheaterSound, SRS and symbol are trademarks of SRS
Labs, Inc.
TheaterSound technology is incorporated under licence from
SRS Lab, Inc.
Manufactured under licence from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under licence under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 &
other U.S. and worldwide patents issued & pending. DTS
and the Symbol are registered trademarks. & DTS 2.0+
Digital Out and the DTS logos are trademarks of DTS, Inc.
Product Includes software. ⓒ DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and
other countries.Trademark: Rovi and Rovi Guide are trademarks of Rovi
Corporation and/or its subsidiaries.
Licence: The Rovi Guide system is manufactured under licence
from Rovi Corporation and/or its subsidiaries.
Patent: The Rovi Guide system is protected by patents and
patent applications filed in the US, Europe, and other countries
including one or more of the United States patents 6,396,546;
5,940,073; 6,239,794 issued to Rovi Corporation and/or its
subsidiaries.
Disclaimer: Rovi Corporation and/or its subsidiaries and
related affiliates are not in any way liable for the accuracy or
availability of the programme schedule information or other
data in the Rovi Guide system and cannot guarantee service
availability in your area. In no event shall Rovi Corporation and/
or its related affiliates be liable for any damages in connection
with the accuracy or availability of the programme schedule
information or other data in the Rovi Guide system.
Plasma TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model _____________Serial No. _____________
E-MANUAL
© 2011 Samsung Electronics Co., Ltd. All rights reserved.
BN68-03497E-03
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country Customer Care Centre Web Site
AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com/at
BELGIUM 02-201-24-18 www.samsung.com/be (Dutch)
www.samsung.com/be_fr (French)
CZECH 800 - SAMSUNG (800-726786) www.samsung.com/cz
Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8
DENMARK 70 70 19 70 www.samsung.com/dk
FINLAND 030 - 6227 515 www.samsung.com/fi
FRANCE 01 48 63 00 00 www.samsung.com/fr
GERMANY 01805 - SAMSUNG (726-7864 € 0,14/Min) www.samsung.de
HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com/hu
ITALIA 800-SAMSUNG (726-7864) www.samsung.com/it
LUXEMBURG 261 03 710 www.samsung.com/lu
NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com/nl
NORWAY 815-56 480 www.samsung.com/no
POLAND 0 801 1SAMSUNG (172678)
022-607-93-33
www.samsung.com/pl
PORTUGAL 80820-SAMSUNG (726-7864) www.samsung.com/pt
SLOVAKIA 0800-SAMSUNG (726-7864) www.samsung.com/sk
SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com/es
SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com/se
TURKEY 444 77 11 www.samsung.com/tr
U.K 0845 SAMSUNG (7267864) www.samsung.com/uk
EIRE 0818 717100 www.samsung.com/ie
SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) www.samsung.com/ch
www.samsung.com/ch_fr/(French)
LITHUANIA 8-800-77777 www.samsung.com/lt
LATVIA 8000-7267 www.samsung.com/lv
ESTONIA 800-7267 www.samsung.com/ee
[PD490-XN_ZF]BN68-03497E-02L04.indb 1 2011-03-07 오후 5:24:20English - 2
For more information on how to use e-Manual (p. 14)
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance. Product design and specifications may be changed without notice.
Digital TV notice
1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are
broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local
dealer the possibility to receive DVB-T or DVB-C signal.
2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast
transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so
on, are not included in this specification. So, they cannot be workable at this moment.
3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and
DVB-C digital cable broadcasts cannot be guaranteed.
4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may
be required to agree to terms and conditions of their business.
5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers.
6. For more information, please contact your local Samsung customer care centre.
✎ The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV
performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or
not.
User Instructions
• Screen Image retention
Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image
retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the
screen when displaying a still image.
• Heat on the top of the Plasma TV
The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the
product.
This is normal and does not indicate any defect or operation failure of the product.
However, children should be prevented from touching the upper part of the product.
• The product is making a “cracking” noise.
A “cracking” noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or
humidity. This is normal and not a defect of the unit.
• Cell Defects
The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
• Avoid operating the TV at temperatures below 41°F (5°C)
• A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of
the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to
the screen.
Damages caused by the above effect are not covered by the Warranty.
• After-images on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the “brightness” and “contrast” when displaying still images for a long time.
• Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste
and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the
retailer where they purchased this product, or their local government office, for details of where and how they can take these items
for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery
contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of,
these substances can cause harm to human health or the environment. To protect natural resources and to promote material
reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.
[PD490-XN_ZF]BN68-03497E-02L04.indb 2 2011-03-07 오후 5:24:21English - 3
Accessories
✎Please make sure the following items are included with your TV. If any items are missing, contact your
dealer.
✎The items’ colours and shapes may vary depending on the models.
✎Cables not included in the package contents can be purchased separately.
✎Check that there is no accessory hidden behind packing materials when you open the box.
[CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET
• Remote Control & Batteries (AAA x 2) • Power Cord
• Owner’s Instructions • Cleaning-Cloth
• Warranty Card (Not available in some locations) / Safety Guide
43 inches model
Ferrite Core (2EA)
✎Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from
interference. When connecting a cable, open the ferrite core and clip it around the
cable near the plug as shown in the figure.
x A Minimum distance between the ferrite core and the end of the cord inserted in
the TV: 6~8 inches (15~20 cm)
x B Maximum distance between the ferrite core and the other end of the cord
inserted in the AC outlet: 3/4 inches (2 cm)
Power Cord
A B
[PD490-XN_ZF]BN68-03497E-02L04.indb 3 2011-03-07 오후 5:24:21English - 4
51 inches model
Ferrite Core (2EA) Ferrite Core (1EA)
✎Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from
interference. When connecting a cable, open the ferrite core and clip it around the
cable near the plug as shown in the figure.
x A Minimum distance between the ferrite core and the end of the cord inserted in
the TV: 6~8 inches (15~20 cm)
x B Maximum distance between the ferrite core and the other end of the cord
inserted in the AC outlet: 3/4 inches (2 cm)
Power Cord
✎Ferrite Core: The ferrite cores are used to shield the cables from interference.
When connecting a cable, open the ferrite core and clip it around the cable near
the plug as shown in the figure.
Antenna Cable /
Component Cable
(sold separately)
• An administration fee may be charged if either
– (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual)
– (b) you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
• The amount of such administration charge will be advised to you before any work or home visit is carried out.
A B
[PD490-XN_ZF]BN68-03497E-02L04.indb 4 2011-03-07 오후 5:24:22English - 5
Viewing the Control Panel
✎The product colour and shape may vary depending on the model.
Remote control sensor Aim the remote control towards this spot on the TV.
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
SOURCEE Toggles between all the available input sources. In the on-screen menu, use
this button as you would use the ENTERE button on the remote control.
MENU Displays an on-screen menu, the OSD (on screen display) of your TV’s
y features.
Adjusts the volume. In the OSD, use the y buttons as you would use
z the ◄ and ► buttons on the remote control.
Changes the channels. In the OSD, use the z buttons as you
would use the ▼ and ▲ buttons on the remote control.
P (Power) Turns the TV on or off.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example).
A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug
the power cord.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of
the product.
✎When using a stand or wall-mount, use parts provided by Samsung Electronics only.
x If you use parts provided by another manufacturer, it may result in a problem with the product or an injury
due to the product falling.
✎The appearance may differ depending on the product.
✎Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand. Installation with a wall-mount.
10 cm 10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Control Panel
[PD490-XN_ZF]BN68-03497E-02L04.indb 5 2011-03-07 오후 5:24:22English - 6
Viewing the Remote Control
✎This is a special remote control for the visually impaired and has Braille points on the Channel and Number
buttons.
Installing batteries (Battery size: AAA)
Turns the TV on and off.
Displays and selects the available video
sources.
Returns to the previous channel.
Cuts off the sound temporarily.
Changes channels.
Displays channel lists on the screen.
Displays the EPG (Electronic Programme
Guide).
Displays information on the TV screen.
u/d/l/r : Move the cursor on-screen
menu item.
ENTERE: Selects the menu and
changes the corresponding item value.
Exits the menu.
Have direct access to channels.
Adjusts the volume.
Alternately select Teletext ON, Double,
Mix or OFF.
Opens the OSD.
Quickly select frequently used functions.
Displays the Content Home, which
includes Watch TV, My Downloads and
Source.
Returns to the previous menu.
These buttons are for the Channel
Manager, My Downloads menu, etc.
Use these buttons in My Downloads
and Anynet+ modes.
P.MODE: Press to select the Picture
Mode.
W: Sets the video, which provided with
3D signal.
DUAL f-g: Sound effect selection.
E-MANUAL: Displays the e-Manual.
P.SIZE: Selects the Picture Size.
AD/SUBT.: Turns the audio description on
and off (not available in some locations). /
Displays digital subtitles.
[PD490-XN_ZF]BN68-03497E-02L04.indb 6 2011-03-07 오후 5:24:23English - 7
Changing the Input Source
Source
Use to select TV or an external input
sources such as a DVD / Blu-ray player /
cable box /STB satellite receiver.
1. Press the SOURCE button on your
remote.
2. Select a desired external input source.
✎You can change the view mode
among the All and Connected by pressing
the l or r button.
■ TV / Ext. / PC / HDMI1/DVI / HDMI2 / HDMI3 /
AV / Component / USB
✎In the Source, connected inputs will be
highlighted.
✎Ext. and PC always stay activated.
✎If the connected external devices are not
highlighted, press the red button. The TV will
search for connected devices.
Edit Name
In the Source, press the TOOLS button, and then you
can set an external input sources name you want.
■ VCR / DVD / Cable STB / Satellite STB / PVR
STB / AV Receiver / Game / Camcorder / PC /
DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD
DVD / DMA: Name the device connected to the
input jacks to make your input source selection
easier.
✎When connecting a PC to the HDMI IN 1(DVI)
port with HDMI cable, you should set the TV to
PC mode under Edit Name. (PS51D490)
✎When connecting a PC to the HDMI IN 1(DVI)
port with HDMI to DVI cable, you should set
the TV to DVI PC mode under Edit Name.
(PS51D490)
✎When connecting an AV devices to the HDMI IN
1(DVI) port with HDMI to DVI cable, you should
set the TV to DVI Devices mode under Edit
Name. (PS43D490, PS51D490)
Information
You can see detailed information about the selected
external device.
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎Preset: Connecting the mains and antenna.
✎The PDP device may interfere with an amateur radio or AM radio.
✎When using two-way radio mobile and portable units or amateur radio or AM radio near by your TV, this may
cause the TV to malfunction.
Cable VHF/UHF Antenna
or
Power Input
[PD490-XN_ZF]BN68-03497E-02L04.indb 7 2011-03-07 오후 5:24:24English - 8
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings.
Press the POWERP button. Plug & Play is available only when the Source is set to TV.
✎Before turning on the TV, make sure the antenna cable is connected (p. 6).
✎To return to the previous step, press the Red button.
1
Selecting a language Press the ▲ or ▼ button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
2
Selecting Store
Demo or Home Use
Press the ◄ or ► button, then press the ENTERE button.
Select the Home Use mode. Store Demo mode is for retail
environments.
To return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume OSD, press and hold MENU for 5 sec.
Store Demo is only for shop display. If you select it, several
functions are not able to use. Please select Home Use when you
watch at home.
3
Selecting a country Press the ▲ or ▼ button, then press the ENTERE button. Select the
appropriate country. (depending on the country)
✎After selecting the country in the Country menu, some models may proceed
with an additional option to setup the pin number.
✎When you input the PIN number, “0-0-0-0” is not available.
4
Setting the Clock
Mode
Set the Clock Mode automatically or manually.
Auto: Select the time zone where you are located.
Manual: Allows you to manually set the current date and time.
5
Selecting an antenna Press the ▲ or ▼ button, then press the ENTERE button. Select the Antenna
source to memorise.
6
Selecting a channel Press the ▲ or ▼ button, then press the ENTERE button. Select the channel
source to memorise. When setting the antenna source to Cable, a step appears
allowing you to assign numerical values (channel frequencies) to the channels. For
more information, refer to Channel → Auto Tuning.
7
Enjoy your TV. Press the ENTERE button.
If You Want to Reset This Feature...
You should do Plug & Play (MENU → System) again at home although you did in shop.
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”
(except France). If you want to change the PIN number, use the Change PIN function.
✎If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode,
which resets the PIN to “0-0-0-0” (France: “1-1-1-1”): MUTE → 8 → 2 → 4 → POWER (on).
P
POWER
[PD490-XN_ZF]BN68-03497E-02L04.indb 8 2011-03-07 오후 5:24:24English - 9
Connecting to an AV devices
¦
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite
receiver, VCR
Using an HDMI or an HDMI to DVI cable (up to 1080p)
✎HDMI IN 1(DVI), 2, 3 / PC/DVI AUDIO IN
x When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack for video. A DVD,
Blu-ray player, HD cable box, or HD STB satellite receiver may require a DVI-HDMI (DVI to HDMI) cable
or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.
x The picture may not display normally (if at all) or the audio may not work if an external device that uses
an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer
of the external device about the HDMI version and, if out of date, request an upgrade.
x Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection
error may occur.
USB HDMI IN
HDMI OUT
DVI OUT
AUDIO OUT
R-AUDIO-L
W R
HDMI connection
HDMI to DVI connection
[PD490-XN_ZF]BN68-03497E-02L04.indb 9 2011-03-07 오후 5:24:25English - 10
Using a Component (up to 1080p) or an Audio/Video (480i only) and a Scart Cable
✎In Ext. mode, DTV Out supports MPEG SD Video and Audio only.
✎When connecting to AV IN, the colour of the AV IN [Y/VIDEO] jack (green) will not match the video
cable (yellow).
✎To obtain the best picture quality, the Component connection is recommended over the A/V
connection.
AUDIO OUT
R-AUDIO-L
VIDEO OUT
AUDIO OUT
R-AUDIO-L
PR PB Y
COMPONENT OUT
EXT
Component connection
AV connection
SCART connection
[PD490-XN_ZF]BN68-03497E-02L04.indb 10 2011-03-07 오후 5:24:25English - 11
Connecting to a PC and Audio device
¦ Available devices: digital audio system, amplifier, DVD home theatre, PC
Using an Optical (Digital) or a Headphone Connection
✎DIGITAL AUDIO OUT (OPTICAL)
x When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the
volume of both the TV and the system.
x 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack.
When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver.
When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-TopBox) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the
home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your
DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.
✎Headphones H: You can connect your headphones to the headphones output on your set. While the
headphones are connected, the sound from the built-in speakers will be disabled.
x Sound function may be restricted when connecting headphones to the TV.
x Headphone volume and TV volume are adjusted separately.
OPTICAL
DVD home theatre connection
Headphones connection
[PD490-XN_ZF]BN68-03497E-02L04.indb 11 2011-03-07 오후 5:24:26English - 12
¦ Using an HDMI cable or an HDMI to DVI cable or a D-sub cable
✎Connecting through the HDMI cable may not be supported depending on the PC.
Display Modes (D-Sub and an HDMI to DVI Input)
• PS43D490: 1024 X 768 @ 60Hz
• PS51D490: 1360 X 768 @ 60Hz
Mode Resolution
Horizontal
Frequency (KHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency
(MHz)
Sync Polarity
(H / V)
PS43D490 PS51D490
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-
-/+
c
c
c
c
MAC
640 x 480
832 x 624
35.000
49.726
66.667
74.551
30.240
57.284
-/-
-/-
c
c
c
c
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1360 x 768
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
47.712
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
60.015
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
85.500
-/-
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+/+
+/+
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
✎NOTE
x For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
x The interlace mode is not supported.
x The set might operate abnormally if a non-standard video format is selected.
x Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
PC OUT AUDIO OUT AUDIO OUT DVI OUT HDMI OUT
PC connection
[PD490-XN_ZF]BN68-03497E-02L04.indb 12 2011-03-07 오후 5:24:27English - 13
Connecting to a COMMON INTERFACE slot
Using the “CI or CI+ CARD”
To watch paid channels, the “CI or CI+ CARD” must be inserted.
• If you don’t insert the “CI or CI+ CARD”, some channels will
display the message “Scrambled Signal”.
• The pairing information containing a telephone number, the
“CI or CI+ CARD” ID the Host ID and other information will
be displayed in about 2~3 minutes. If an error message is
displayed, please contact your service provider.
• When the configuration of channel information has finished,
the message “Updating Completed” is displayed, indicating
the channel list is updated.
✎NOTE
x You must obtain a “CI or CI+ CARD” from a local cable service provider.
x When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+
CARD” may cause damage to it.
x Insert the “CI or CI+ CARD” in the direction marked on the card.
x The location of the COMMON INTERFACE slot may be different depending on the model.
x “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.
x If you have any problems, please contact a service provider.
x Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or
will not be seen.
[PD490-XN_ZF]BN68-03497E-02L04.indb 13 2011-03-07 오후 5:24:27English - 14
How to view the e-Manual
Screen Display
How to toggle between the e-Manual and the corresponding menu(s).
✎This function is not enabled in some menus.
Method 1 Method 2
1. Press the red button to select Try Now, if you
want to execute the corresponding menu(s).
2. To return to the e-Manual screen, press the
E-MANUAL button.
1. Press the ENTERE button when selecting
Contents Area. The “Are you sure?” is displayed.
Select Yes and then press the ENTERE button.
The OSD window will be displayed.
2. To return to the e-Manual screen, press the
E-MANUAL button.
E-MANUAL You can read the introduction and instructions about the TV features stored
in your TV.
O MENUm → Support → e-Manual → ENTERE
✎If you want to return to e-Manual, press E-MANUAL button on remote.
✎You can’t use the Try Now function, if the menu is not activated.
Basic Features
Changing the Preset Picture Mode
Adjusting Picture Settings
Changing the Picture Size
Changing the Picture Options
Setting up the TV with Your PC
} Index E Enter e Exit
TV Screen: Displays the current
input
source screen.
Change the category. Press l or r
button to select category you want.
Displays the sub-menu list. Press
ENTERE button to select submenu you want.
Operation Buttons:
} Blue (Index): Displays index screen.
E Enter: Select a category or sub-menu.
e Exit: Exit the e-Manual.
Try Now
E-MANUAL
Changing the Preset Picture Mode
■
Select your preferred picture type.
Picture Mode t
• Dynamic: Suitable for a bright room.
• Standard: Suitable for a normal environment.
• Natural for LED TV / Relax for PDP TV : Suitable for reducing eye strain.
• Movie: Suitable for watching movies in a dark room.
• Entertain: Suitable for watching movies and games.
N It is only available in PC mode.
Changing the Preset Picture Mode
O MENUm → Picture → Picture Mode → ENTERE
■ Picture Mode
Select your preferred picture type.
N When an input source is set to PC, the Picture Mode is only available the
Standard and Entertain.
• Dynamic: Suitable for a bright room.
• Standard: Suitable for a normal environment.
• Movie: Suitable for watching movies in a dark room.
• Entertain: Suitable for watching movies and games.
Basic Features > Changing the Preset Picture Mode (5/10)
a Try Now b Home { Zoom } Index L Page e Exit
Picture
Picture Mode : Standard r
Cell Light : 10
Contrast : 100
Brightness : 45
Sharpness : 50
Colour : 50
Tint (G/R) : G50/R50
Screen Adjustment
[PD490-XN_ZF]BN68-03497E-02L04.indb 14 2011-03-07 오후 5:24:33English - 15
Viewing the Contents
Using the Zoom mode
When you view the e-Manual instruction, select the
yellow button to magnify the screen. You can scroll
through the magnified screen by using the u or d
buttons.
✎To return to the previous screen, press the
RETURN button.
How to search a keyword by using index page
✎This function may not supported depending on the language.
1. If you want to search a keyword, press the blue button to select Index.
2. Press the l or r button to select a character order you want, and then press the ENTERE button.
3. Press the u or d button to select a keyword you want to see, and then press the ENTERE button.
4. You can view the corresponding e-Manual instruction screen.
✎To close the Index screen, press the RETURN button.
a Try Now b Home { Zoom } Index L Page e Exit
Basic Features > Changing the Preset Picture Mode (5/10)
Contents Area: You can view the corresponding
contents, if you selected a sub-menu. To move
previous or next page, press the l or r button.
Operation Buttons:
a Red (Try Now): Displays the corresponding menu(s).
b Green (Home): Moves to the e-Manual home screen.
{ Yellow (Zoom): Magnifies a screen.
} Blue (Index): Displays index screen.
L (Page): Moves to previous or next page.
Changing the Preset Picture Mode
O MENUm → Picture → Picture Mode → ENTERE
■ Picture Mode
Select your preferred picture type.
N When an input source is set to PC, the Picture Mode is only
available the Standard and Entertain.
• Dynamic: Suitable for a bright room.
• Standard: Suitable for a normal environment.
• Movie: Suitable for watching movies in a dark room.
• Entertain: Suitable for watching movies and games.
R Return
Changing the Preset Picture Mode
O MENUm → Picture → Picture Mode → ENTERE
■ Picture Mode
Select your preferred picture type.
N When an input source is set to PC, the Picture Mode is only available the Standard
and Entertain.
• Dynamic: Suitable for a bright room.
• Standard: Suitable for a normal environment.
• Movie: Suitable for watching movies in a dark room.
• Entertain: Suitable for watching movies and games.
[PD490-XN_ZF]BN68-03497E-02L04.indb 15 2011-03-07 오후 5:24:34English - 16
Installing the Wall Mount
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a
technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect
to install the TV on your own.
Wall Mount Kit Specifications (VESA)
✎The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials,
please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal
injury.
✎NOTE
x Standard dimensions for wall mount kits are shown in the table below.
x When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly
are provided.
x Do not use screws that do not comply with the VESA standard screw specifications.
x Do not use screws that are longer than the standard dimension or do not comply with the VESA standard
screw specifications. Screws that are too long may cause damage to the inside of the TV set.
x For wall mounts that do not comply with the VESA standard screw specifications, the length of the
screws may differ depending on the wall mount specifications.
x Do not fasten the screws that are too strongly; this may damage the product or cause the product to fall,
leading to personal injury. Samsung is not liable for these kinds of accidents.
x Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall
mount is used or the consumer fails to follow the product installation instructions.
x Do not mount the TV at more than a 15 degree tilt.
Product Family inches
VESA Spec.
(A * B)
Standard Screw Quantity
PDP-TV
43~51 400 X 400
M8 4
59~64 600 X 400
✎Unscrew the hole around before installing Wall-Mount on the wall.
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury
due to electric shock.
[PD490-XN_ZF]BN68-03497E-02L04.indb 16 2011-03-07 오후 5:24:35English - 17
Troubleshooting
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please
visit “www.samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this
manual.
Issues Solutions and Explanations
The TV won’t turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns
on, refer to “Remote control does not work” below.
There is no picture/video. • Check cable connections (remove and reconnect all cables connected to the TV and external
devices).
• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections
to the TV input. For example, if an external device’s output is HDMI, it should be connected to an
HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.
The remote control does not work. • Replace the remote control batteries with the poles (+/–) in the right direction.
• Clean the sensor’s transmission window on the remote.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
doesn’t turn the TV on or off, or adjust the
volume.
• Programme the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for
the SAMSUNG TV code.
✎Some of above pictures and functions are available at specific models only.
✎You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com →
Support → Downloads) by USB.
Licence
List of Features
Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be
viewed without a cable box / STB (Set-Top-Box) satellite receiver.
3D
This exciting new feature enables you to view 3D content.
Anynet+(HDMI-CEC)
Allows you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote.
My Downloads
Allows you to play music files, pictures, and movies saved on a USB device.
[PD490-XN_ZF]BN68-03497E-02L04.indb 17 2011-03-07 오후 5:24:35English - 18
Securing the TV to the wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure
that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over,
resulting in serious injuries or death. Follow all safety precautions provided in the included Safety
Flyer. For added stability and safety, install the anti-fall device as follows.
To Avoid the TV from Falling
1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
✎You may need additional material such as an anchor depending on
the type of wall.
✎Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
2. Remove the screws from the back centre of the TV, put the screws into
the clamps, and then fasten the screws onto the TV again.
✎Screws may not be supplied with the product. In this case, please
purchase the screws of the following specifications.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall
with a strong cable and then tie the string tightly.
✎NOTE
x Install the TV near to the wall so that it does not fall backwards.
x It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the
clamps fixed on the TV.
x Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If
you have any doubt about the security of your connections, contact a professional installer.
Storage and Maintenance
✎If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please
clean it to watch TV.
Do not spray water or a cleaning agent directly onto
the product. Any liquid that goes into the product may
cause a failure, fire, or electric shock.
Clean the product with a soft cloth dapped in a small
amount of water.
Wall
[PD490-XN_ZF]BN68-03497E-02L04.indb 18 2011-03-07 오후 5:24:36English - 19
Specifications
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
TV System Analogue: B/G, D/K, L, I (Depending on your country selection)
Digital: DVB-T/DVB-C
Colour/Video System Analogue: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60
Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0
Sound System BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC.
HDMI IN Video: 1080 24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: 2Ch Linear PCM 32/44.1/48kHz, 16/20/24bits.
Stand Swivel (Left / Right) -20˚ ~ 20˚
Model Name PS43D490 PS51D490
Screen Size 43 inches (109 cm) 51 inches (128 cm)
Sound
(Output) 10 W X 2
Dimensions (WxDxH)
Body
With stand
1011.8 X 56.0 X 622.4 mm
1011.8 X 305.0 X 698.7 mm
1187.8 X 56.0 X 706.6 mm
1187.8 X 305.0 X 782.9 mm
Weight
Without Stand
With Stand
16.0 kg
20.3 kg
22.5 kg
26.8 kg
Display Resolution 1024 X 768 1360 X 768
✎Design and specifications are subject to change without prior notice.
✎For information about power supply, and more about power consumption, refer to the label attached to the
product.
✎Hereby, Samsung, declares that this PDP TV is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
[PD490-XN_ZF]BN68-03497E-02L04.indb 19 2011-03-07 오후 5:24:36Declaration of Conformity
For the following
Product : PDP TV
Model(s) : PS43D490, PS51D490
Year of Affixing CE Marking : 2011
Manufactured at:
F1: Samsung Electronics Co., Ltd.
416, Maetan 3-Dong, Yeongtong-Gu, Suwon-Si, Gyeonggi-Do, 443-742 Korea
F2: Samsung Electronics Slovakia s.r.o
Hviezdoslavova 807 924 27 Galanta, Slovak Republic
F3: Samsung Electronics Hungarian Co., Ltd.
H-5126 Jaszfenyszaru, Samsung ter 1
(Factories name and address)
We hereby declare under our sole responsibility that the electrical product above is in compliance with
the essential requirements of R&TTE Directive (1995/5/EC), the Low Voltage Directive (2006/95/EC) and
Electromagnetic Compatibility Directive (2004/108/EC) by application of
EN 60065: 2002+A1:2006+A11:2008
EN55022: 2006+A1:2007
EN61000-3-2:2006
EN 300 328-1 v1.7.1
EN 301 489-17 v1.3.2 :2008
EN61000-3-3:1995+A1:2001+A2:2005
EN55024:1998+A1:2001+A2:2003
EN55013:2001+A1:2003+A2 :2006
EN55020:2007
EN 301 489-1 v1.8.1 :2008
and the Eco-Design Directive (2009/125/EC) implemented by Regulation (EC) No 642/2009 for televisions.
The Technical documentation is kept at the below Manufacturer’s address.
Manufacturer
Samsung Electronics Co., Ltd.
416 Maetan-dong, Young-Tong gu,
Suwon, Korea 442-742
05 Jan 2011
(Place and date of issue)
Chang Seub Eum / Manager
(Name and signature of authorized person)
Representative in the EU :
Samsung Electronics Euro QA Lab.
Blackbushe Business Park
Saxony Way, Yateley, Hampshire
GU46 6GG, UK
06 Jan 2011
(Place and date of issue)
Joong Hoon Choi / Lab. Manager
(Name and signature of authorized person)
Note : It is not the address of Samsung Service Centre. For the address or the phone number of
Samsung Service Centre, see the warranty card or contact the retailer where you purchased your
product.
ELECTRONICS
[PD490-XN_ZF]BN68-03497E-02L04.indb 20 2011-03-07 오후 5:24:37This page is intentionally
left blank.
[PD490-XN_ZF]BN68-03497E-02L04.indb 21 2011-03-07 오후 5:24:37Français - 2
Pour plus d’informations sur l’utilisation du manuel électronique (p. 14)
Les figures et illustrations contenues dans ce mode d’emploi sont fournies pour référence uniquement. Elles peuvent différer de
l’aspect réel du produit. La conception et les spécifications du produit sont susceptibles d’être modifiées sans préavis.
Avis concernant le téléviseur numérique
1. Les fonctions relatives au téléviseur numérique (DVB) ne sont disponibles que dans les pays ou régions où des signaux terrestres numériques de type DVB-T
(MPEG2 et MPEG4 AVC) sont diffusés ou dans lesquels vous avez accès à un service de télévision par câble compatible DVB-C (MPEG2 et MPEG4 AAC).
Consultez votre distributeur local pour connaître les possibilités en matière de réception des signaux DVB-T ou DVB-C.
2. DVB-T est la norme du consortium européen pour la diffusion de signaux terrestres de télévision numérique. La norme DVB-C est quant à elle prévue pour la
diffusion des signaux de télévision numérique par câble. Certaines fonctions particulières, telles que le guide électronique des programmes (Electric Program
Guide - EPG), la vidéo à la demande (Video on Demand - VOD), etc., ne sont toutefois pas incluses dans cette spécification. Dès lors, elles ne seront pas
traitées pour l’instant.
3. Bien que ce téléviseur soit conforme aux dernières normes DVB-T et DVB-C (août 2008), il n’est pas garanti qu’il soit compatible avec les futures diffusions de
signaux numériques terrestres DVB-T et par câble DVB-C.
4. En fonction du pays ou de la région où vous vous trouvez, certains opérateurs de télévision par câble peuvent facturer des frais supplémentaires pour un tel
service. Vous devrez aussi peut-être accepter les termes et conditions de ces sociétés.
5. Il se peut que certaines fonctions de TV numérique ne soient pas disponibles dans certains pays ou certaines régions et que la réception des signaux DVB-C
ne soit pas correcte avec tous les opérateurs.
6. Pour plus d’informations, contactez le service client local de Samsung.
✎ Les différentes méthodes de diffusion adoptées en fonction des pays peuvent affecter la qualité de réception du téléviseur. Vérifiez le fonctionnement
du téléviseur chez votre revendeur agréé SAMSUNG ou contactez le centre d’appel de Samsung pour savoir s’il est possible d’en améliorer les
performances en reconfigurant les réglages.
Instructions d’utilisation
• Rémanence à l’écran
N’affichez pas une image figée (telle qu’elle apparaît sur un jeu vidéo) sur l’écran à plasma au-delà de quelques minutes, sinon cela risquerait de provoquer
une rémanence à l’écran. Cette rémanence de l’image est également appelée “brûlure de l’écran”. Pour éviter la rémanence, réduisez le niveau de contraste
ou de luminosité de l’écran lorsque vous affichez une image figée.
• Chaleur diffusée sur la partie supérieure du téléviseur à écran plasma
Le dessus de l’appareil peut chauffer en cas d’utilisation prolongée, car la chaleur s’échappe du panneau par le trou d’aération situé dans la partie supérieure
du produit.
Ce phénomène est normal et n’indique aucunement la présence d’un défaut ou d’un dysfonctionnement.
Il convient cependant d’empêcher les enfants de toucher la partie supérieure de l’écran.
• Le produit fait un bruit de “claquement”.
Ce bruit de “claquement” risque d’être perceptible lorsque le produit se contracte ou s’étend suite à un changement du milieu ambiant, tel que la température
ou l’humidité. Ce phénomène est normal et ne constitue pas un défaut.
• Défauts de cellule
L’écran à plasma utilise un panneau constitué de 2 360 000 (niveau HD) à 6 221 000 (niveau FHD) pixels dont la fabrication fait appel à une technologie
avancée. Il se peut toutefois que quelques points clairs ou sombres apparaissent à l’écran. Ils n’ont aucune incidence sur la performance du produit.
• Evitez d’utiliser le téléviseur à des températures inférieures à 5°C (41°F).
• Une image figée affichée pendant une période prolongée peut endommager définitivement l’écran PDP.
Visionner pendant longtemps le téléviseur à écran plasma en format 4/3 risque de laisser apparaître des traces de bordures sur la gauche,
sur la droite et au centre de l’écran. Ces traces sont dues à la différence de luminosité sur l’écran. Lire un DVD ou un jeu vidéo sur console
risque de provoquer des effets similaires sur l’écran.
Les dommages provoqués par l’effet susmentionné ne sont pas couverts par la garantie.
• Images rémanentes à l’écran.
L’affichage d’images fixes de jeux vidéo et d’ordinateurs pendant une période excessive peut produire des rémanences.
Pour empêcher ce phénomène, réduisez la luminosité et le contraste en cas d’affichage prolongé d’images figées.
• Garantie
La garantie ne couvre pas les dommages causés par la rémanence.
Les brûlures ne sont pas couvertes par la garantie.
Les bons gestes de mise au rebut de ce produit (Déchets d’équipements électriques et électroniques)
(Applicable dans les pays de l’Union Européenne et dans d’autres pays européens pratiquant le tri sélectif)
Ce symbole sur le produit, ses accessoires ou sa documentation indique que ni le produit, ni ses accessoires électroniques usagés
(chargeur, casque audio, câble USB, etc.) ne peuvent être jetés avec les autres déchets ménagers. La mise au rebut incontrôlée des
déchets présentant des risques environnementaux et de santé publique, veuillez séparer vos produits et accessoires usagés des autres
déchets. Vous favoriserez ainsi le recyclage de la matière qui les compose dans le cadre d’un développement durable. Les particuliers sont
invités à contacter le magasin leur ayant vendu le produit ou à se renseigner auprès des autorités locales pour connaître les procédures et
les points de collecte de ces produits en vue de leur recyclage. Les entreprises et professionnels sont invités à contacter leurs fournisseurs
et à consulter les conditions de leur contrat de vente. Ce produit et ses accessoires ne peuvent être jetés avec les autres déchets
professionnels et commerciaux.
Élimination des piles de ce produit
(Applicable aux pays de l’Union européenne et aux autres pays européens dans lesquels des systèmes de collecte sélective sont
mis en place)
Le symbole sur la batterie, le manuel ou l’emballage indique que les batteries de ce produit ne doivent pas être éliminées en fin de vie avec
les autres déchets ménagers. L’indication éventuelle des symboles chimiques Hg, Cd ou Pb signifie que la batterie contient des quantités
de mercure, de cadmium ou de plomb supérieures aux niveaux de référence stipulés dans la directive CE 2006/66. Si les batteries ne
sont pas correctement éliminées, ces substances peuvent porter préjudice à la santé humaine ou à l’environnement. Afin de protéger les
ressources naturelles et d’encourager la réutilisation du matériel, veillez à séparer les batteries des autres types de déchets et à les recycler
via votre système local de collecte gratuite des batteries.
[PD490-XN_ZF]BN68-03497E-02L04.indb 2 2011-03-07 오후 5:24:37Français - 3
Accessoires
✎Vérifiez que les éléments suivants sont inclus avec votre téléviseur. S’il manque des éléments, contactez votre
revendeur.
✎Les couleurs et les formes des éléments peuvent varier en fonction des modèles.
✎Les câbles qui ne se trouvent pas dans le contenu de l’emballage peuvent être achetés séparément.
✎Vérifiez qu’aucun accessoires n’est caché dans l’emballage lorsque vous ouvrez la boîte.
[ATTENTION : INSEREZ FERMEMENT DE MANIERE A CE QU’IL NE SE DETACHE PAS
• Télécommande et piles (AAA x 2) • Câble d’alimentation
• Instructions d’utilisation • Tissu de nettoyage
• Carte de garantie (non disponible dans certains pays) / Manuel de sécurité
dèle 43 pouces uniquement
Blindage magnétique (2EA)
✎Blindage magnétique pour cordon d’alimentation : le blindage magnétique sert à protéger les
câbles des interférences. Lors de la connexion d’un câble, ouvrez le blindage magnétique et
rabattez-le autour du câble près de la prise, comme illustré.
x A Distance maximale entre le blindage magnétique et une extrémité du cordon insérée dans
le téléviseur : 6~8 pouces (15~20 cm)
x B Distance maximale entre le blindage magnétique et l’autre extrémité du cordon insérée
dans la prise CA : 3/4 pouces (2 cm)
Câble
d’alimentation
A B
[PD490-XN_ZF]BN68-03497E-02L04.indb 3 2011-03-07 오후 5:24:38Français - 4
Modèle 51 pouces uniquement
Blindage magnétique (2EA) Blindage magnétique (1EA)
✎Blindage magnétique pour cordon d’alimentation : le blindage magnétique sert à protéger
les câbles des interférences. Lors de la connexion d’un câble, ouvrez le blindage
magnétique et rabattez-le autour du câble près de la prise, comme illustré.
x A Distance maximale entre le blindage magnétique et une extrémité du cordon insérée
dans le téléviseur : 6~8 pouces (15~20 cm)
x B Distance maximale entre le blindage magnétique et l’autre extrémité du cordon insérée
dans la prise CA : 3/4 pouces (2 cm)
Câble d’alimentation
✎Blindage magnétique : le blindage magnétique sert à protéger les câbles des interférences.
Lors de la connexion d’un câble, ouvrez le blindage magnétique et rabattez-le autour du
câble près de la prise, comme illustré.
Cable d’antenne /
Câble composante
(matériel vendu
séparément)
• Des frais d’administration peuvent vous être facturés si :
– (a) un technicien intervient à votre demande et que le produit ne comporte aucun défaut
(c.-à-d. si vous n’avez pas pris la peine de lire le présent manuel d’utilisation)
– (b) vous amenez le produit dans un centre de réparation alors qu’il ne comporte aucun défaut
– (c.-à-d. si vous n’avez pas pris la peine de lire le présent manuel d’utilisation).
• Le montant de ces frais d’administration vous sera signifié avant la réalisation de toute prestation ou visite à domicile.
A B
[PD490-XN_ZF]BN68-03497E-02L04.indb 4 2011-03-07 오후 5:24:38Français - 5
Présentation du panneau de configuration
✎La couleur et la forme du produit peuvent varier en fonction du modèle.
Capteur de la télécommande Dirigez la télécommande vers ce point du téléviseur.
Témoin d’alimentation Clignote, puis s’arrête lorsque le téléviseur est allumé. S’allume en mode Veille.
SOURCEE Bascule entre toutes les sources d’entrée disponibles. Dans le menu du téléviseur, ce
bouton a la même fonction que le bouton ENTERE de la télécommande.
MENU Affiche un menu à l’écran OSD (on screen display) reprenant les fonctions de votre
y téléviseur.
Règle le volume. Dans le menu à l’écran (OSD), utilisez les boutons y de la
z même façon que les boutons ◄ et ► de la télécommande.
zPermet de modifier les chaînes. Dans le menu à l’écran (OSD), utilisez les boutons
de la même façon que les boutons ▼ et ▲ de la télécommande.
P (Alimentation) Permet d’allumer et d’éteindre le téléviseur.
Mode veille
Ne laissez pas le téléviseur en mode Veille pendant de longues périodes (lorsque vous partez en vacances, par exemple).
Même s’il est en veille, l’appareil consomme toujours une petite quantité d’énergie. Il est préférable de débrancher le cordon
d’alimentation.
Sécurisation de l’espace d’installation
Maintenez les distances requises entre le produit et les autres objets (par exemple, les murs) afin de garantir une ventilation
adaptée.
Le non-respect de ces distances peut provoquer un incendie ou un problème au produit en raison d’une augmentation de la
température interne de celui-ci.
✎Lors de l’utilisation d’un pied ou d’un support mural, utilisez uniquement les pièces fournies par Samsung Electronics.
x L’utilisation de pièces fournies par un autre fabricant peut occasionner un problème au niveau du produit ou la chute
de celui-ci, ce qui pourrait vous blesser.
✎L’aspect peut varier en fonction du produit.
✎Soyez prudent lorsque vous touchez le téléviseur, car certaines parties peuvent être brûlantes.
Installation avec un pied. Installation avec un support de montage mural.
10 cm 10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Panneau de configuration
[PD490-XN_ZF]BN68-03497E-02L04.indb 5 2011-03-07 오후 5:24:39Français - 6
Présentation de la télécommande
✎Ceci est une télécommande spéciale destinée aux malvoyants. Elle dispose de points Braille sur les touches de chaînes
et de volume.
Installation des piles (type de pile : AAA)
Permet d’allumer et d’éteindre le téléviseur.
Permet d’afficher et de sélectionner les
sources vidéo disponibles.
Permet de revenir à la chaîne précédente.
Permet d’arrêter temporairement le son.
Permet de changer de chaîne.
Permet d’afficher les listes des chaînes à l’écran.
Permet d’afficher le EPG (Electronic
Programme Guide).
permet d’afficher des informations à l’écran.
u/d/l/r : permet de déplacer le curseur
dans les éléments du menu à l’écran.
ENTERE: permet de sélectionner le
menu et de modifier la valeur de l’élément
correspondante.
Permet de quitter le menu.
Donne un accès direct aux chaînes.
Règle le volume.
Choisissez Teletext Activé, Double, Mix ou
ARRET.
Permet d’ouvrir l’affichage à l’écran.
Permet de sélectionner rapidement les
fonctions fréquemment utilisées.
Affiche le menu Content Home, qui comprend
Regarder la TV, Mon contenu et Source.
Permet de revenir au menu précédent.
Ces boutons sont utilisés dans les menus
Gestion chaînes, Mon contenu, etc.
Utilisez ces boutons avec les modes
Mon contenu et Anynet+.
P.MODE : permet de sélectionner le mode
Mode Image.
W: définit la vidéo fournissant le signal 3D.
DUAL f-g : Sélection d’effets sonores.
E-MANUAL : affiche le e-Manual.
P.SIZE : sélectionne le Format de l’image.
AD/SUBT. : permet d’activer ou de
désactiver la description audio (non
disponible pour tous les pays). / Permet
d’afficher les sous-titres numériques.
[PD490-XN_ZF]BN68-03497E-02L04.indb 6 2011-03-07 오후 5:24:40Français - 7
Changement de la source d’entrée
Source
A utiliser pour sélectionner le téléviseur ou
d’autres sources d’entrée externes, telles que
des lecteurs DVD/Blu-ray, des décodeurs
câble ou des récepteurs satellite (boîtiers
décodeurs).
1. Appuyez sur le bouton SOURCE de votre
télécommande.
2. Sélectionnez la source d’entrée externe de votre choix.
✎Vous pouvez basculer entre les modes d’affichage
Tous et Connecté en appuyant sur le bouton l
ou r.
■ TV / Ext. / PC / HDMI1/DVI / HDMI2 / HDMI3 / AV /
Component / USB
✎Les entrées connectées sont mises en surbrillance
dans Source.
✎Les options Ext. et PC sont toujours activées.
✎Si les périphériques externes connectés ne sont pas
mis en surbrillance, appuyez sur le bouton rouge. Le
téléviseur lance une recherche de périphériques.
Modif. Nom
Dans Source, appuyez sur le bouton TOOLS. Vous pouvez
ensuite définir le nom de la source externe que vous
souhaitez.
■ Magnétoscope / DVD / Décodeur câble / Décodeur
satellite / Décodeur PVR / Récepteur AV / Jeux /
Caméscope / PC / DVI PC / Périph. DVI / TV / IPTV
/ Blu-ray / HD DVD / DMA : Nommez le périphérique
connecté aux prises d’entrée pour faciliter la sélection
de la source d’entrée.
✎Lorsque vous connectez un PC au port HDMI IN 1(DVI)
avec un câble HDMI, vous devez définir le téléviseur en
mode PC dans Modif. Nom. (PS51D490)
✎Lorsque vous connectez un PC au port HDMI IN
1(DVI) avec un câble HDMI/DVI, vous devez définir
le téléviseur en mode DVI PC dans Modif. Nom.
(PS51D490)
✎Lorsque vous connectez un périphérique AV au port
HDMI IN 1(DVI) avec un câble HDMI/DVI, vous devez
définir le téléviseur en mode Périph. DVI dans Modif.
Nom. (PS43D490, PS51D490)
Information
Affiche des informations détaillées sur le périphérique
externe sélectionné.
Raccordement à une antenne
Lorsque vous allumez le téléviseur pour la première fois, des réglages de base s’effectuent de manière automatique.
✎Préréglage : connexion du câble d’alimentation et de l’antenne.
✎L’appareil PDP peut créer des interférences avec la radio amateur ou la radio AM.
✎L’utilisation de radios portables ou mobiles, d’émetteurs-récepteurs, ainsi que de radios amateur ou AM près de votre
téléviseur pourrait engendrer des dysfonctionnements de l’appareil.
Câble Antenne VHF/UHF
ou
Entrée de l’alimentation
[PD490-XN_ZF]BN68-03497E-02L04.indb 7 2011-03-07 오후 5:24:40Français - 8
Plug & Play (configuration initiale)
Lorsque le téléviseur est allumé pour la première fois, plusieurs invites s’affichent pour vous aider à configurer les réglages de
base. Appuyez sur le bouton POWERP. Plug & Play est disponible uniquement si Source est définie sur TV.
✎Avant de mettre le téléviseur sous tension, assurez-vous que l’antenne est branchée (p. 6).
✎Pour revenir à l’étape précédente, appuyez sur le bouton rouge.
1
Choix d’une langue Appuyez sur le bouton ▲ ou ▼, puis appuyez sur le bouton ENTERE.
Sélectionnez la langue de votre choix pour l’affichage à l’écran.
2
Sélection du mode Enr.
démo ou Util. domicile
Appuyez sur le bouton ◄ ou ►, puis appuyez sur le bouton ENTERE.
Sélectionnez le mode Util. domicile. Le mode Enr. démo est prévu pour
un usage en magasin.
Pour rétablir les paramètres du téléviseur de Enr. démo à Util. domicile
(standard) : appuyez sur le bouton Volume du téléviseur. Lorsque
l’affichage à l’écran du volume apparaît, appuyez pendant 5 secondes sur
MENU.
Enr. démo est disponible uniquement pour être exposé en magasin.
Si vous sélectionnez cette option, plusieurs fonctions ne sont pas
disponibles. Sélectionnez Util. domicile lorsque vous regardez le
téléviseur à la maison.
3
Sélection d’un pays Appuyez sur le bouton ▲ ou ▼, puis appuyez sur le bouton ENTERE. Sélectionnez le
pays de votre choix. (en fonction du pays)
✎Après la sélection du pays dans le menu Pays, certains modèles peuvent demander,
en plus, le code PIN.
Lors de l’entrée du code PIN, “0-0-0-0” n’est pas disponible.
4
Réglage du Mode
Horloge
Réglez le Mode Horloge automatiquement ou manuellement.
Auto. : Sélectionnez votre fuseau horaire.
Manuel : vous permet de définir manuellement la date et l’heure actuelles.
5
Sélection d’une antenne Appuyez sur le bouton ▲ ou ▼, puis appuyez sur le bouton ENTERE. Sélectionner les
antennes à mettre en mémoire.
6
Sélection d’une chaîne Appuyez sur le bouton ▲ ou ▼, puis appuyez sur le bouton ENTERE. permet de
sélectionner la source des chaînes à mémoriser. Lors du réglage de la source d’antenne
sur Câble, une fenêtre s’affiche pour vous permettre d’attribuer des valeurs numériques
(fréquences) aux chaînes. Pour plus d’informations, reportez-vous à Canal → Recherche
automatique.
7
Profitez de votre
téléviseur.
Appuyez sur le bouton ENTERE.
Si vous souhaitez réinitialiser cette fonction...
Vous devez à nouveau sélectionner Plug & Play (MENU → Système) chez vous, bien que vous l’ayez fait en magasin.
Sélectionnez Système - Plug & Play (Configuration initiale). Entrez votre code PIN à quatre chiffres. Le code PIN par défaut
est “0-0-0-0” (excepte France) Si vous souhaitez modifier le code PIN, utilisez la fonction Modifier PIN.
✎Si vous avez oublié le code PIN, appuyez sur les boutons de la télécommande dans l’ordre suivant, ce qui remet le code
PIN à “0-0-0-0” (France: “1-1-1-1”): MUTE → 8 → 2 → 4 → POWER (marche)
P
POWER
[PD490-XN_ZF]BN68-03497E-02L04.indb 8 2011-03-07 오후 5:24:41Français - 9
Connexion à un périphérique AV
¦
Périphériques disponibles : DVD, Lecteur Blu-ray, décodeur câble HD, récepteur satellite
HD (boîtier décodeur), Magnétoscope
Utilisation d’un câble HDMI ou HDMI vers DVI (jusqu’à 1080p)
✎HDMI IN 1(DVI), 2, 3 / PC/DVI AUDIO IN
x Lorsque vous utilisez une connexion avec câble HDMI/DVI, vous devez utiliser la borne HDMI IN 1(DVI) pour les
vidéos. Un lecteur DVD ou Blu-ray, un décodeur câble HD, un récepteur satellite HD, un décodeur câble ou un
récepteur satellite (décodeur) peuvent nécessiter un câble DVI-HDMI (DVI vers HDMI) ou un adaptateur DVI-HDMI
(DVI vers HDMI). La prise PC/DVI AUDIO IN est indispensable pour les signaux audio.
x Il se peut que l’affichage soit médiocre, voire inexistant, ou que le son soit de mauvaise qualité si un périphérique
externe connecté au téléviseur utilise un mode HDMI d’une ancienne version. Dans ce cas, demandez au
fabricant du périphérique externe de vous communiquer la version HDMI et, dans l’hypothèse où elle serait
obsolète, demandez-lui une mise à niveau.
x Veillez également à acheter un câble HDMI certifié. Dans le cas contraire, il se peut que l’écran n’affiche aucune
image ou qu’une erreur de connexion se produise.
USB HDMI IN
HDMI OUT
DVI OUT
AUDIO OUT
R-AUDIO-L
W R
Connexion HDMI
Connexion HDMI à DVI
[PD490-XN_ZF]BN68-03497E-02L04.indb 9 2011-03-07 오후 5:24:41Français - 10
Utilisation d’un câble Composant (jusqu’à 1080p) ou Audio/Vidéo (480i uniquement) et d’un câble Scart
✎En mode Ext., la sortie DTV prend uniquement en charge les signaux vidéo et audio MPEG SD.
✎Lors de la connexion à AV IN, la couleur de la prise AV IN [Y/VIDEO] (verte) ne correspond pas à celle du câble
vidéo (jaune).
✎Pour obtenir une qualité d’image optimale, il est préférable d’opter pour la connexion Composante (plutôt que la
connexion A/V).
AUDIO OUT
R-AUDIO-L
VIDEO OUT
AUDIO OUT
R-AUDIO-L
PR PB Y
COMPONENT OUT
EXT
Connexion à composantes
Connexion AV
Connexion SCART
[PD490-XN_ZF]BN68-03497E-02L04.indb 10 2011-03-07 오후 5:24:42Français - 11
Connexion entre un PC et un périphérique audio
¦
Périphériques disponibles : système audio numérique, amplificateur, système home
cinéma DVD, PC
Utilisation d’une connexion Optique (Numérique) ou d’une sortie casque
✎DIGITAL AUDIO OUT (OPTICAL)
x Lorsqu’un système audio numérique est connecté à la prise DIGITAL AUDIO OUT (OPTICAL), diminuez le volume
du téléviseur et du système.
x Le mode audio 5.1 CH est disponible uniquement si le téléviseur est relié à un périphérique externe prenant en
charge ce mode.
x Lorsque le récepteur (home cinéma) est activé, vous pouvez écouter le son sortant de la prise optique du
téléviseur. Lorsque le téléviseur reçoit un signal DTV, il envoie du son 5.1 canaux au récepteur du système home
cinéma. Si la source est un composant numérique (par exemple, un lecteur DVD, un lecteur Blu-ray, un décodeur
câble ou un récepteur satellite) connecté au téléviseur en HDMI, le récepteur home cinéma émet uniquement du
son sur 2 canaux. Pour obtenir un son en mode 5.1, reliez la prise de sortie audio numérique du lecteur DVD, du
lecteur Blu-ray, du décodeur câble ou du récepteur satellite (boîtier externe) directement à un amplificateur ou un
système home cinéma.
✎Ecouteurs H : vous pouvez brancher vos écouteurs sur la prise casque du téléviseur. Lorsque le casque est
branché, les enceintes intégrées n’émettent plus de son.
x La fonction Son peut être limitée lorsque des écouteurs sont connectés au téléviseur.
x Le volume des écouteurs et celui du téléviseur sont réglés séparément.
OPTICAL
Connexion Ensemble
DVD Home Theater
Connexion casque
[PD490-XN_ZF]BN68-03497E-02L04.indb 11 2011-03-07 오후 5:24:42Français - 12
¦ Utilisation d’un câble HDMI, d’un câble HDMI vers DVI ou d’un câble D-sub
✎En fonction du PC, la connexion à l’aide du câble HDMI peut ne pas être prise en charge.
Modes d’affichage (Entrées D-Sub et HDMI vers DVI)
• PS43D490 : 1024 X 768 @ 60Hz
• PS51D490 : 1360 X 768 @ 60Hz
Mode Résolution
Fréquence
horizontale (kHz)
Fréquence
verticale (kHz)
Fréquence
d’horloge pixels
(MHz)
Polarité de
synchronisation
(H/V)
PS43D490 PS51D490
IBM
640 x 350
720 x 400
31,469
31,469
70,086
70,087
25,175
28,322
+/-
-/+
c
c
c
c
MAC
640 x 480
832 x 624
35,000
49,726
66,667
74,551
30,240
57,284
-/-
-/-
c
c
c
c
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1360 x 768
31,469
37,861
37,500
37,879
48,077
46,875
48,363
56,476
60,023
47,712
59,940
72,809
75,000
60,317
72,188
75,000
60,004
70,069
75,029
60,015
25,175
31,500
31,500
40,000
50,000
49,500
65,000
75,000
78,750
85,500
-/-
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+/+
+/+
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
✎REMARQUE
x Dans le cas d’une connexion avec câble HDMI/DVI, vous devez utiliser la prise HDMI IN 1(DVI).
x Le mode entrelacé n’est pas pris en charge.
x Le téléviseur peut fonctionner de façon anormale si le format vidéo sélectionné n’est pas standard.
x Les modes Separate et Composite sont pris en charge. Le mode SOG (Sync On Green) n’est pas pris en charge.
PC OUT AUDIO OUT AUDIO OUT DVI OUT HDMI OUT
Connexion PC
[PD490-XN_ZF]BN68-03497E-02L04.indb 12 2011-03-07 오후 5:24:43Français - 13
Connexion à un port INTERFACE COMMUNE
Utilisation de la “CARTE CI ou CI+”
Pour regarder les chaînes payantes, la carte d’interface commune (CI(CI+)
CARD) doit être insérée.
• Si vous ne l’insérez pas, certaines chaînes afficheront le message
“Signal brouillé”.
• Les informations de pairage contenant un numéro de téléphone,
l’ID de la carte d’interface commune (CI(CI+) CARD), l’ID de l’hôte
et d’autres informations s’afficheront dans 2 ou 3 minutes. Si un
message d’erreur s’affiche, contactez votre fournisseur d’accès.
• Lorsque la configuration des informations sur les canaux est terminée,
le message “Mise à jour terminée” s’affiche, indiquant que la liste des
chaînes est mise à jour.
✎REMARQUE
x Vous devez vous procurer une carte d’interface commune (CI(CI+) CARD) auprès d’un fournisseur local de diffusion
par câble.
x Lorsque vous sortez la carte d’interface commune (CI(CI+) CARD), tirez-la délicatement. Une chute pourrait en effet
l’endommager.
x Insérez la carte d’interface commune (CI(CI+) CARD) dans le sens indiqué sur celle-ci.
x L’emplacement de la fente COMMON INTERFACE peut varier en fonction du modèle.
x La carte d’interface commune (CI(CI+) CARD) n’est pas prise en charge dans certains pays et certaines régions ;
vérifiez auprès de votre revendeur agréé.
x Si vous rencontrez des problèmes, contactez le fournisseur d’accès.
x Insérez la carte d’interface commune (CI ou CI+ CARD), qui prend en charge les paramètres actuels de l’antenne.
L’image sera déformée, voire invisible.
[PD490-XN_ZF]BN68-03497E-02L04.indb 13 2011-03-07 오후 5:24:44Français - 14
Consultation du manuel électronique (e-Manual)
Affi chage
Comment basculer entre le e-Manual et le(s) menu(s) correspondant(s)
✎Cette fonction n’est pas disponible dans certains menus.
Méthode 1 Méthode 2
1. Appuyez sur le bouton rouge pour sélectionner
Essayer, si vous souhaitez exécuter le(s) menu(s)
correspondant(s).
2. Pour revenir à l’écran du manuel électronique, appuyez
sur le bouton E-MANUAL.
1. Appuyez sur le bouton ENTERE lors de la sélection
de la zone de contenu. Le message “Exécuter?”
s’affi che. Sélectionnez Oui et appuyez ensuite sur le
bouton ENTERE. La fenêtre des menus à l’écran
s’affi che.
2. Pour revenir à l’écran du manuel électronique, appuyez
sur le bouton E-MANUAL.
Vous pouvez consulter la présentation et les instructions relatives aux fonctionnalités
TV stockées sur le téléviseur.
O MENUm→ Assistance → e-Manual → ENTERE
✎Pour revenir au manuel électronique, appuyez sur la touche E-MANUAL de la télécommande.
✎Vous ne pouvez pas utiliser la fonction Essayer si le menu n’est pas activé.
Fonctions de base
Changement du Mode Image prédéfi ni
Réglages des paramètres de l’image
Changement de la taille de l’image
Modifi cation des options d’image
Confi guration du téléviseur avec le PC
} Index E Entrer e Quitter
Ecran de télévision : affi che l’écran de
la source d’entrée actuelle.
Changer de catégorie. Appuyez sur le
bouton l ou r pour sélectionner la
catégorie de votre choix.
Affi che la liste des sous-menus.
Appuyez sur le bouton ENTERE
pour sélectionner le sous-menu de
votre choix.
Boutons d’opération :
}Bleu (Index) : affi che l'écran d'index.
E Entrer : sélectionner une catégorie ou un sous-menu.
e Quitter : permet de quitter le e-Manual.
E-MANUAL
Essayer
E-MANUAL
Changing the Preset Picture Mode
■
Sélectionnez le type d’image que vous préférez.
Mode Image t
• Dynamique : adapté à un environnement lumineux.
• Standard : adapté à un environnement normal.
• Naturel pour les téléviseurs LED / Relax pour les téléviseurs plasma : permet de réduire
la fatigue oculaire.
• Cinéma : adapté au visionnage de fi lms dans une pièce sombre.
• Loisirs : adapté au visionnage de fi lms et de jeux vidéo.
N Disponible uniquement en mode PC.
Changement du Mode Image prédéfi ni
O MENUm → Image → Mode Image → ENTERE
■ Mode Image
Sélectionnez le type d’image que vous préférez.
N Lorsqu’une source d’entrée est défi nie sur PC, seules les options Standard et
Loisirs sont disponibles pour le Mode Image.
• Dynamique : adapté à un environnement lumineux.
• Standard : adapté à un environnement normal.
• Cinéma : adapté au visionnage de fi lms dans une pièce sombre.
• Loisirs : adapté au visionnage de fi lms et de jeux vidéo.
Fonctions de base > Changement du Mode Image prédéfi ni (5/10)
a Essayer b Accueil { Zoom } Index L Page e Quitter
Image
Mode Image : Standard r
Lum. Cellules : 10
Contraste : 100
Luminosité : 45
Netteté : 50
Couleur : 50
Teinte (V/R) : V50/R50
Réglage de l’écran
[PD490-XN_ZF]BN68-03497E-02L04.indb 14 2011-03-07 오후 5:24:50Français - 15
Affichage du contenu
Utilisation du mode Zoom
Lors de la consultation des instructions du manuel
électronique, appuyez sur le bouton jaune pour agrandir
l’écran. Pour parcourir l’écran agrandi, utilisez le bouton u
ou d.
✎Pour revenir à l’écran précédent, appuyez sur le bouton
RETURN.
Recherche d’un mot-clé en utilisant la page d’index
✎Cette fonction n’est pas prise en charge dans toutes les langues.
1. Si vous souhaitez rechercher un mot-clé, appuyez sur le bouton bleu afin d’ouvrir l’écran Index.
2. Appuyez sur le bouton l ou r pour sélectionner l’ordre des caractères de votre choix et appuyez ensuite sur
ENTERE.
3. Appuyez sur le bouton uor d pour sélectionner le mot-clé à afficher et appuyez ensuite sur ENTERE.
4. Vous accédez à l’écran d’instructions correspondant du manuel électronique.
✎Pour fermer l’écran Index, appuyez sur le bouton RETURN.
a Essayer b Accueil { Zoom } Index L Page e Exit (Quitter)
Fonctions de base > Changement du Mode Image prédéfini (5/10)
Zone de contenu : si vous avez sélectionné un
sous-menu, vous pouvez afficher le contenu
correspondant. Pour accéder à la page précédente
ou suivante, appuyez sur le bouton l ou r.
Boutons d’opération :
a Rouge (Essayer) : affiche le(s) menu(s) correspondant(s).
b Vert (Accueil) : permet d'accéder à l'écran d'accueil du e-Manual.
{Jaune (Zoom) : agrandit l'écran.
}Bleu (Index) : affiche l'écran d'index.
L (Page): permet de passer à la page précédente ou suivante.
Changement du Mode Image prédéfini
O MENUm → Image → Mode Image → ENTERE
■ Mode Image
Sélectionnez le type d’image que vous préférez.
N When an input source is set to PC, the Picture Mode is only
available the Standard and Entertain.
• Dynamique : adapté à un environnement lumineux.
• Standard : adapté à un environnement normal.
• Cinéma : adapté au visionnage de films dans une pièce sombre.
• Loisirs : adapté au visionnage de films et de jeux vidéo.
R Retour
Changement du Mode Image prédéfini
O MENUm → Image → Mode Image → ENTERE
■ Mode Image
Sélectionnez le type d’image que vous préférez.
N Lorsqu’une source d’entrée est définie sur PC, seules les options Standard et
Loisirs sont disponibles pour le Mode Image.
• Dynamique : adapté à un environnement lumineux.
• Standard : adapté à un environnement normal.
• Cinéma : adapté au visionnage de films dans une pièce sombre.
• Loisirs : adapté au visionnage de films et de jeux vidéo.
[PD490-XN_ZF]BN68-03497E-02L04.indb 15 2011-03-07 오후 5:24:51Français - 16
Installation du support mural
Installation du kit de montage mural
Le kit de montage mural (vendu séparément) permet de fixer le téléviseur au mur.
Pour plus d’informations sur l’installation du support mural, reportez-vous aux instructions fournies avec le support mural.
Faites appel à un technicien pour installer la fixation murale.
Samsung Electronics ne saurait être tenu pour responsable d’un endommagement du produit ou d’une blessure si vous
choisissez d’effectuer vous-même l’installation murale.
Caractéristiques du kit de fixation murale (VESA)
✎Le kit de montage mural n’est pas fourni ; il est vendu séparément.
Installez votre fixation murale sur un mur solide perpendiculaire au sol. Si vous souhaitez la fixer sur d’autres matériaux de
construction, veuillez prendre contact avec votre revendeur le plus proche. Si vous l’installez au plafond ou sur un mur non
droit, la fixation risque de tomber et de provoquer de graves blessures.
✎REMARQUE
x Les dimensions standard pour tous les kits de fixation murale sont indiquées dans le tableau ci-dessous.
x Un manuel d’installation détaillé et toutes les pièces nécessaires au montage sont fournis avec le kit de fixation mural.
x N’utilisez pas de vis non conformes aux spécifications des vis VESA standard.
x N’utilisez pas de vis plus longues que la dimension standard ou non conformes aux caractéristiques des vis VESA
standard. Des vis trop longues pourraient endommager l’intérieur du téléviseur.
x Pour les fixations murales non conformes aux caractéristiques des vis VESA standard, la longueur des vis peut varier,
selon les caractéristiques de la fixation murale.
x Ne serrez pas trop les vis : cela pourrait endommager le produit ou provoquer sa chute, entraînant des blessures
corporelles. Samsung ne peut être tenue responsable de ce type d’accident.
x Samsung ne peut être tenue responsable de tout dommage au produit ou toute blessure corporelle dans le cas de
l’utilisation d’une fixation murale non-VESA ou non spécifiée, ou si l’utilisateur ne suit pas les instructions d’installation
du produit.
x N’inclinez pas le téléviseur de plus de 15 degrés.
Famille de
produits
pouces
Spéc. VESA
(A * B)
Vis standard Quantité
TELEVISEUR
ECRAN A
PLASMA
43~51 400 X 400
M8 4
59~64 600 X 400
✎Desserrez les vis avant d’installer le dispositif de fixation murale.
N’installez pas votre kit de fixation murale lorsque le téléviseur est allumé. Vous risqueriez de vous
électrocuter.
[PD490-XN_ZF]BN68-03497E-02L04.indb 16 2011-03-07 오후 5:24:51Français - 17
Résolution des problèmes
Si vous avez des questions sur le téléviseur, commencez par consulter la liste ci-dessous. Si aucune de ces
solutions de dépannage ne s’applique à votre problème, rendez-vous sur le site “www.samsung.com”, puis
cliquez sur Assistance ou contactez le centre d’appels dont les coordonnées figurent sur la dernière page de ce
manuel.
Problèmes Solutions et explications
La télévision ne s’allume pas. • Vérifiez que le cordon d’alimentation secteur est branché correctement sur la prise murale et sur le
téléviseur.
• Vérifiez que la prise murale est opérationnelle.
• Essayez d’appuyer sur le bouton POWER du téléviseur pour vous assurer que le problème n’est pas dû
à la télécommande. Si le téléviseur s’allume, reportez-vous au problème “La télécommande ne fonctionne
pas” ci-après.
Aucune image/vidéo n’est affichée. • Vérifiez le raccordement des câbles (retirez tous les câbles connectés au téléviseur et aux appareils
externes, puis rebranchez-les).
• Réglez la sortie vidéo de votre périphérique externe (décodeur câble/satellite, DVD, Blu-ray, etc.) pour faire
correspondre les connexions à l’entrée du téléviseur. Par exemple, si la sortie d’un périphérique externe est
HDMI, vous devez établir une connexion avec une entrée HDMI du téléviseur.
• Vérifiez que les appareils connectés sont sous tension.
• Veillez à sélectionner la source appropriée du téléviseur en appuyant sur la touche SOURCE de la
télécommande.
La télécommande ne fonctionne pas. • Vérifiez que la polarité (+/–) des piles de la télécommande est respectée.
• Nettoyez la lentille de la télécommande.
• Essayez de diriger directement la télécommande vers le téléviseur à une distance de 1,5 à 1,8 m.
La télécommande du décodeur câble/boîtier
décodeur ne fonctionne pas.
• Programmez la télécommande du décodeur câble/boîtier décodeur de telle sorte qu’elle puisse
commander le téléviseur. Consultez le mode d’emploi du décodeur câble/boîtier décodeur pour obtenir le
code du téléviseur SAMSUNG.
✎Certaines des images et des fonctions ci-dessus sont uniquement disponibles sur des modèles spécifiques.
✎Vous pouvez maintenir votre téléviseur dans des conditions optimales en le mettant à niveau avec le dernier
micrologiciel (samsung.com → Support → Downloads) par le biais d’un périphérique USB.
Licence
Liste des fonctions
Interface numérique et réseau excellents : Avec un syntoniseur numérique HD intégré, la vision des émissions HD sans
inscription ne nécessite pas de décodeur câble/récepteur satellite (boîtier décodeur).
3D
Cette incroyable nouvelle fonction vous permet de regarder du contenu 3D.
Anynet+ (HDMI-CEC)
Vous permet de contrôler tous les appareils Samsung connectés compatibles Anynet+ à l’aide de votre télécommande
Samsung.
Mon contenu
Vous permet de lire les fichiers de musique, les images et les films enregistrés sur un périphérique USB.
[PD490-XN_ZF]BN68-03497E-02L04.indb 17 2011-03-07 오후 5:24:52Français - 18
Fixation du téléviseur au mur
Attention : si vous tirez ou poussez le téléviseur ou si vous grimpez dessus, il risque de tomber. Veillez
notamment à ce que vos enfants ne se suspendent pas au téléviseur, ni ne le déséquilibrent, car cela pourrait
le faire basculer et occasionner des blessures graves, voire entraîner la mort. Respectez toutes les précautions
de sécurité indiquées dans la brochure relative à la sécurité. Pour une stabilité et une sécurité accrues,
installez le dispositif antichute comme indiqué ci-après.
Pour éviter toute chute du téléviseur :
1. Glissez les vis dans les colliers, puis fixez-les solidement au mur. Assurez-vous
que les vis ont été fermement fixées au mur.
✎En fonction du type de mur, il est possible que vous ayez besoin de matériel
supplémentaire, tel que des chevilles.
✎Les colliers, vis et chaînettes n’étant pas fournis, vous devez les acheter
séparément.
2. Retirez les vis situées sur la partie centrale arrière du téléviseur, placez les vis dans
les bagues, puis fixez-les à nouveau sur le téléviseur.
✎Il se peut que les vis ne soient pas fournies avec le produit. Dans ce cas,
achetez des vis présentant les caractéristiques suivantes.
3. Reliez les colliers fixés au téléviseur et ceux fixés sur le mur à l’aide d’un câble
solide, puis attachez-les fermement.
✎REMARQUE
x Placez le téléviseur à proximité du mur afin qu’il ne bascule pas vers
l’arrière.
x Il est recommandé de placer la chaînette de façon à ce que les colliers fixés au mur soient placés à la même
hauteur ou plus bas que ceux fixés au téléviseur.
x Détachez la chaînette avant de déplacer le téléviseur.
4. Vérifiez que toutes les connexions sont fixées correctement. Vérifiez régulièrement que les connexions ne présentent
aucun signe d’usure. Si vous avez un doute quant à la sécurité des connexions, contactez un installateur professionnel.
Stockage et entretien
✎Si des autocollants sont appliqués sur l’écran du téléviseur, leur retrait peut laisser quelques traces. Nettoyez-les avant
d’utiliser le téléviseur.
Ne vaporisez pas d’eau ni d’agent nettoyant directement
sur le produit. Tout liquide qui entre dans le produit peut
engendrer une défaillance, un incendie ou une électrocution.
Nettoyez le produit à l’aide d’un chiffon doux imprégné d’une
petite quantité d’eau.
Mur
[PD490-XN_ZF]BN68-03497E-02L04.indb 18 2011-03-07 오후 5:24:53Français - 19
Caractéristiques techniques
Considérations environnementales
Température de fonctionnement
Humidité en cours de fonctionnement
Température de stockage
Humidité sur le lieu de stockage
De 10°C à 40°C (50°F à 104°F)
10% à 80%, sans condensation
De -20°C à 45°C (-4°F à 113°F)
5% à 95%, sans condensation
Système TV Analogique : B/G, D/K, L, I (en fonction de votre pays)
Numérique : DVB-T/DVB-C
Système de couleur/vidéo Analogique : PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60
Numérique : MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0
Système Sonore BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC.
HDMI IN Vidéo : 1080 24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio : 2Ch Linear PCM 32/44.1/48 kHz, 16/20/24 bits.
Socle orientable (gauche/droite) -20˚ ~ 20˚
Nom du modèle PS43D490 PS51D490
Taille de l’écran 43 pouces (109 cm) 51 pouces (128 cm)
Son
(Sortie) 10 W X 2
Dimensions (L x P x H)
Corps
Avec socle
1011,8 X 56,0 X 622,4 mm
1011,8 X 305,0 X 698,7 mm
1187,8 X 56,0 X 706,6 mm
1187,8 X 305,0 X 782,9 mm
Poids
Sans socle
Avec socle
16,0 kg
20,3 kg
22,5 kg
26,8 kg
Résolution de l’affichage 1024 X 768 1360 X 768
✎La conception et les spécifications peuvent être modifiées sans préavis.
✎Pour plus d’informations sur les caractéristiques d’alimentation et de consommation électrique, reportez-vous à l’étiquette
fixée au produit.
✎Par la présente Samsung déclare que l’appareil PDP TV est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/CE.
[PD490-XN_ZF]BN68-03497E-02L04.indb 19 2011-03-07 오후 5:24:53Déclaration de conformité
Produit : PDP TV
Modèles : PS43D490, PS51D490
Apposition du marquage CE : 2011
Ce produit a été fabriqué dans l’une des usines suivantes :
U1: Samsung Electronics Co., Ltd
416, Maetan 3-Dong, Yeongtong-Gu, Suwon-Si, Gyeonggi-Do, 443-742, Corée
U2: Samsung Electronics Slovaquie s.r.o
Hviezdoslavova 807 924 27 Galanta, République slovaque
U3: Samsung Electronics Co. hongrois
H-5126 Jaszfenyszaru
(Nom et adresse des usines)
Par la présente Samsung Electronics déclare que les PDP TV, PS43D490, PS51D490 sont conformes aux
exigences essentielles de la Directive 1999/5/CE du Parlement Européen et du Conseil du 9 mars 1999
concernant les équipements hertziens et les équipements terminaux de télécommunications et la
reconnaissance mutuelle de leur conformité, ainsi qu’à la Directive Basse Tension (2006/95/CE) et la
Directive Compatibilité Electromagnétique (2004/108/CE) par application des
EN 60065: 2002+A1:2006+A11:2008
EN55022:2006+A1:2007
EN 61000-3-2:2006
EN 300 328-1 v1.7.1
EN 301 489-17 v1.3.2 :2008
EN61000-3-3:1995+A1:2001+A2:2005
EN55024:1998+A1:2001+A2:2003
EN55013:2001+A1:2003+A2 :2006
EN55020:2007
EN 301 489-1 v1.8.1 :2008
et la Directive Eco-conception (2009/125/CE) mise en œuvre par le Règlement (CE) n° 642/2009 pour les
téléviseurs.
La documentation technique est conservée à l’adresse du fabricant figurant ci-dessous.
Fabricant:
Samsung Electronics Co., Ltd.
416 Maetan-dong, Young-Tong gu,
Suwon, Korea 442-742
26 Janv 2011
(Lieu et date de signature)
Chang Seub Eum / Manager
(Nom et signature de la personne autorisée)
Représentant en UE :
Samsung Electronics Euro QA Lab.
Blackbushe Business Park
Saxony Way, Yateley, Hampshire
GU46 6GG, UK
28 Janv 2011
(Lieu et date de signature)
Joong Hoon Choi / Responsable du Laboratoire
(Nom et signature de la personne autorisée)
Note : L’adresse ci-dessus ne correspond pas à l’adresse du Centre de Service Samsung. Pour obtenir l’adresse
ou le numéro de téléphone du Centre de Service Samsung dont vous dépendez, veuillez vous reporter à la carte de
garantie du produit ou contacter votre revendeur.
Cet équipement peut être utilisé dans tous les pays de l’Union Européenne.
Restriction : En France, cet équipement ne doit être utilisé qu’à l’intérieur des bâtiments.
ELECTRONICS
[PD490-XN_ZF]BN68-03497E-02L04.indb 20 2011-03-07 오후 5:24:53This page is intentionally
left blank.
[PD490-XN_ZF]BN68-03497E-02L04.indb 21 2011-03-07 오후 5:24:53Deutsch - 2
Weitere Informationen zur Verwendung des e-Manuals (Seite 14)
Die Abbildungen und Illustrationen in diesem Handbuch dienen nur zur Information und können vom tatsächlichen
Aussehen des Geräts abweichen. Änderungen an Ausführung und technischen Daten vorbehalten.
Hinweis zu Digitalfernsehen
1. Die Funktionalitäten für Digital TV (DVB) stehen nur in Ländern/Regionen zur Verfügung, in denen digitale terrestrische DVB-T-Signale (MPEG2 und MPEG4
AVC) gesendet werden oder in denen Sie Zugang zu einem kompatiblen Kabelfernsehdienst mit DVB-C (MPEG2 und MPEG4 AAC) haben. Fragen Sie Ihren
örtlichen Händler, wenn Sie Informationen über die Verfügbarkeit von DVB-T oder DVB-C in Ihrer Gegend benötigen.
2. DVB-T ist der Standard des europäischen DVB-Konsortiums für die terrestrische Versorgung mit digitalem Fernsehen, und DVB-C ist der Standard
des Konsortiums für die Versorgung mit digitalem Kabelfernsehen. Allerdings werden manche Unterscheidungsmerkmale wie EPG (elektrische
Programmzeitschrift), VOD (Video on Demand) usw. in dieser Spezifikation nicht berücksichtigt. Deshalb können sie zum jetzigen Zeitpunkt noch nicht
eingesetzt werden.
3. Zwar hält dieses Fernsehgerät die aktuellen Standards der DVB-T- und DVB-C-Spezifikationen [Version August 2008] ein, aber es kann nicht garantiert
werden, dass die Kompatibilität mit zukünftigen digitalen terrestrischen DVB-T und DBV-C-Signalen gewahrt bleibt.
4. In Abhängigkeit von den Ländern/Regionen, in denen dieses Fernsehgerät eingesetzt wird, verlangen manche Kabelfernsehanbieter zusätzliche Gebühren für
solch einen Dienst, und möglicherweise wird verlangt, dass Sie den Vertragsbedingungen des Unternehmens zustimmen.
5. Manche Digitalfernsehfunktionen sind in einigen Ländern oder Regionen möglicherweise nicht verfügbar, und DVB-C-Signale kann das Gerät bei manchen
Kabelfernsehanbietern möglicherweise nicht fehlerfrei verarbeiten.
6. Für weitere Informationen setzen Sie sich bitte mit dem Samsung-Kundendienstzentrum in Verbindung.
✎ Die Empfangsqualität des Fernsehgeräts kann durch Unterschiede bei den Sendeverfahren in verschiedenen Ländern beeinträchtigt werden.
Kontrollieren Sie die Leistung des Fernsehgeräts bei Ihrem örtlichen SAMSUNG-Händler oder wenden Sie sich an das Samsung-Callcenter um
festzustellen, ob sich die Empfangsqualität durch Ändern der Fernseheinstellungen verbessern lässt.
Benutzerhinweise
• Einbrennen von Standbildern
Lassen Sie Standbilder (z. B. von einem Videospiel) auf dem Plasmamonitor höchstens einige Minuten lang anzeigen, da das Bild anderenfalls einbrennen
kann. Das Einbrennen von Standbildern wird auch als „Bildkonservierung“ bezeichnet. Sie können das Einbrennen vermeiden, indem Sie die Helligkeit und den
Kontrast des Bildschirms beim Anzeigen von Standbildern verringern.
• Wärmeentwicklung auf der Oberseite des Plasmabildschirms
Die Oberseite des Produkts kann nach längerem Betrieb warm werden, da die Wärme aus dem Monitor über die Entlüftungsöffnung im oberen Teil des Geräts
abgeführt wird.
Dies ist normal und weist nicht auf einen Defekt oder eine Fehlfunktion des Geräts hin.
Allerdings sollten Kinder von dem oberen Teil des Geräts ferngehalten werden.
• Das Gerät verursacht ein „knackendes“ Geräusch.
Ein „knackendes“ Geräusch entsteht, wenn das Gerätematerial sich aufgrund einer Änderung der Umgebung, wie z. B. Temperaturschwankungen oder
Änderung der Luftfeuchtigkeit, zusammenzieht oder ausdehnt. Das ist normal und stellt keinen Defekt des Geräts dar.
• Pixelfehler
Der Plasmabildschirm, für dessen Herstellung hoch entwickelte Technologie eingesetzt wird, besitzt eine Bildfläche mit 2.360.000 (bei HD-Auflösung) bis
6.221.000 (bei Full-HD-Auflösung) Pixeln. Allerdings können ein paar zu helle oder zu dunkle Pixel auf der Bildfläche zu sehen sein. Diese Pixelfehler haben
keinen Einfluss auf die Geräteleistung.
• Vermeiden Sie den Betrieb des Plasmabildschirms bei Temperaturen unter 5°C.
• Ein Standbild, dass zu lange angezeigt wird, kann zu einer bleibenden Beschädigung des Plasmabildschirms führen.
Der Betrieb des Plasmafernsehers im Format 4:3 für einen längeren Zeitraum kann links, rechts und in der Mitte des Monitors Spuren der
Bildränder hinterlassen, die durch die unterschiedliche Lichtemission auf dem Monitor verursacht werden. Durch die Wiedergabe einer DVD
oder den Betrieb einer Spielkonsole kann es auf dem Bildschirm zu ähnlichen Effekten kommen.
Schäden, die durch die o. g. Effekte verursacht wurden, fallen nicht unter die Garantie.
• Nachbilder auf dem Bildschirm.
Durch das Anzeigen der Standbilder von Videospielen oder vom PC über einen gewissen Zeitraum hinaus können partielle Nachbilder entstehen.
Um diesen Effekt zu verhindern, verringern Sie Helligkeit und Kontrast, wenn Sie Standbilder für einen längeren Zeitraum anzeigen möchten.
• Garantie
Durch diese Garantie nicht abgedeckt sind Schäden, die durch das Einbrennen von Bildern entstehen.
Das Einbrennen von Bildern wird von der Garantie nicht abgedeckt.
Korrekte Entsorgung von Altgeräten (Elektroschrott)
(In den Ländern der Europäischen Union und anderen europäischen Ländern mit einem separaten Sammelsystem)
Die Kennzeichnung auf dem Produkt, Zubehörteilen bzw. auf der dazugehörigen Dokumentation gibt an, dass das Produkt und Zubehörteile
(z. B. Ladegerät, Kopfhörer, USB-Kabel) nach ihrer Lebensdauer nicht zusammen mit dem normalen Haushaltsmüll entsorgt werden dürfen.
Entsorgen Sie dieses Gerät und Zubehörteile bitte getrennt von anderen Abfällen, um der Umwelt bzw. der menschlichen Gesundheit nicht
durch unkontrollierte Müllbeseitigung zu schaden. Helfen Sie mit, das Altgerät und Zubehörteile fachgerecht zu entsorgen, um die nachhaltige
Wiederverwertung von stofflichen Ressourcen zu fördern. Private Nutzer wenden sich an den Händler, bei dem das Produkt gekauft wurde, oder
kontaktieren die zuständigen Behörden, um in Erfahrung zu bringen, wo Sie das Altgerät bzw. Zubehörteile für eine umweltfreundliche Entsorgung
abgeben können. Gewerbliche Nutzer wenden sich an ihren Lieferanten und gehen nach den Bedingungen des Verkaufsvertrags vor. Dieses
Produkt und elektronische Zubehörteile dürfen nicht zusammen mit anderem Gewerbemüll entsorgt werden.
Korrekte Entsorgung der Batterien dieses Produkts
(In den Ländern der Europäischen Union und anderen europäischen Ländern mit einem separaten Altbatterie-Rücknahmesystem)
Die Kennzeichnung auf der Batterie bzw. auf der dazugehörigen Dokumentation oder Verpackung gibt an, dass die Batterie zu diesem Produkt
nach seiner Lebensdauer nicht zusammen mit dem normalen Haushaltsmüll entsorgt werden darf. Wenn die Batterie mit den chemischen
Symbolen Hg, Cd oder Pb gekennzeichnet ist, liegt der Quecksilber-, Cadmium- oder Blei-Gehalt der Batterie über den in der EG-Richtlinie
2006/66 festgelegten Referenzwerten. Wenn Batterien nicht ordnungsgemäß entsorgt werden, können sie der menschlichen Gesundheit bzw. der
Umwelt schaden. Bitte helfen Sie, die natürlichen Ressourcen zu schützen und die nachhaltige Wiederverwertung von stofflichen Ressourcen zu
fördern, indem Sie die Batterien von anderen Abfällen getrennt über Ihr örtliches kostenloses Altbatterie- Rücknahmesystem entsorgen.
[PD490-XN_ZF]BN68-03497E-02L04.indb 2 2011-03-07 오후 5:24:54Deutsch - 3
Zubehör
✎Vergewissern Sie sich, dass im Lieferumfang des Fernsehgeräts folgende Komponenten enthalten sind. Falls
irgendwelche Teile fehlen sollten, setzen Sie sich bitte mit Ihrem Händler in Verbindung.
✎Farbe und Form der Teile können sich je nach Modell unterscheiden.
✎Kabel, die nicht zum Paketinhalt gehören, können gesondert erworben werden.
✎Achten Sie darauf, dass Sie beim Auspacken keine Zubehörteile übersehen, die durch Verpackungsmaterialien verdeckt
werden.
[VORSICHT: STELLEN SIE DIE VERBINDUNG DAUERHAFT HER, DAMIT DAS NETZTEIL NICHT VOM GERÄT
GETRENNT WERDEN KANN
• Fernbedienung und 2 Batterien (Typ AAA) • Netzkabel
• Bedienungsanleitung • Reinigungstuch
• Garantiekarte (nicht überall verfügbar) / Sicherheitshinweise
Nur 43-Zoll-Modell
Ferritkern (2 Stk.)
✎Ferritkern für Netzkabel: Mit dem Ferritkern werden die Kabel vor Störungen geschützt.
Wenn Sie ein Kabel anschließen, öffnen Sie den Ferritkern und legen Sie ihn in der Nähe des
Steckers mit einem deutlich hörbaren Klicken um das Kabel (siehe Abbildung).
x A Mindestabstand zwischen dem Ferritkern und dem anderen Ende des Kabels, das in das
Fernsehgerät eingesteckt wird: 6~8 Zoll (15~20 cm)
x B Maximaler Abstand zwischen dem Ferritkern und dem anderen Ende des Kabels, das in
die Steckdose eingesteckt wird: 3/4 Zoll (2 cm)
Netzkabel
A B
[PD490-XN_ZF]BN68-03497E-02L04.indb 3 2011-03-07 오후 5:24:54Deutsch - 4
Nur 51-Zoll-Modell
Ferritkern (2 Stk.) Ferritkern (1 Stk.)
✎Ferritkern für Netzkabel: Mit dem Ferritkern werden die Kabel vor Störungen geschützt.
Wenn Sie ein Kabel anschließen, öffnen Sie den Ferritkern und legen Sie ihn in der Nähe des
Steckers mit einem deutlich hörbaren Klicken um das Kabel (siehe Abbildung).
x A Mindestabstand zwischen dem Ferritkern und dem anderen Ende des Kabels, das in
das Fernsehgerät eingesteckt wird: 6~8 Zoll
x B Maximaler Abstand zwischen dem Ferritkern und dem anderen Ende des Kabels, das
in die Steckdose eingesteckt wird: 3/4 Zoll
Netzkabel
✎Ferritkern: Mit dem Ferritkern werden die Kabel vor Störungen geschützt. Wenn Sie ein
Kabel anschließen, öffnen Sie den Ferritkern und legen Sie ihn in der Nähe des Steckers mit
einem deutlich hörbaren Klicken um das Kabel (siehe Abbildung).
Antennenkabel /
Komponentenkabel
(gesondert lieferbar)
• Verwaltungskosten werden abgerechnet, wenn:
– (a) auf Ihren Wunsch ein Ingenieur zu Ihnen geschickt wird, und es liegt kein Defekt des Geräts vor
(d.h. wenn Sie dieses Benutzerhandbuch nicht gelesen haben)
– (b) Sie das Gerät in eine Reparaturwerkstatt bringen, und es liegt kein Defekt des Geräts vor
(d.h. wenn Sie dieses Benutzerhandbuch nicht gelesen haben)
• Der abgerechnete Betrag wird Ihnen mitgeteilt, ehe irgendwelche Arbeiten oder Kundenbesuche ausgeführt werden.
A B
[PD490-XN_ZF]BN68-03497E-02L04.indb 4 2011-03-07 오후 5:24:55Deutsch - 5
Bedienfeld
✎Form und Farbe des Geräts können sich je nach Modell unterscheiden.
Fernbedienungssensor Richten Sie die Fernbedienung auf diesen Sensor am Fernsehgerät.
Netzanzeige Beim Einschalten des Fernsehgeräts blinkt die Netzleuchte kurz und erlischt
anschließend. Im Standby-Modus leuchtet die Anzeige permanent.
SOURCEE Umschalten zwischen allen verfügbaren Signalquellen. Im Bildschirmmenü können
Sie diese Taste wie die Eingabetaste ENTERE auf der Fernbedienung verwenden.
MENU y Hiermit zeigen Sie die Funktionen des Fernsehgeräts in einem Bildschirmmenü an.
yEinstellen der Lautstärke. Im Bildschirmmenü können Sie die
z -Schaltflächen wie die Tasten ◄ und ► auf der Fernbedienung verwenden.
zWechseln des Senders. Im Bildschirmmenü können Sie die
-Schaltflächen wie die Tasten ▼ und ▲ auf der Fernbedienung
verwenden.
P (Netz) Ein- oder Ausschalten des Fernsehgeräts.
Standby-Modus
Der Standby-Modus ist nicht für längere Phasen der Abwesenheit gedacht (z. B. wenn Sie verreist sind). Eine kleine Menge
Strom wird auch dann noch verbraucht, wenn das Gerät mit dem Netzschalter ausgeschaltet wurde. Es ist am besten, das
Netzkabel aus der Steckdose zu ziehen.
Absichern des Aufstellbereichs
Halten Sie die erforderlichen Abstände zwischen dem Gerät und anderen Objekten (z.B. Wänden) ein, um ausreichende
Lüftung sicherzustellen.
Wenn Sie dies nicht tun, besteht die Gefahr, dass aufgrund eines Anstiegs der Temperatur im Innern des Geräts ein Brand
ausbricht oder andere Probleme mit dem Gerät auftreten.
✎Wenn Sie einen Standfuß oder eine Wandhalterung einsetzen, verwenden Sie ausschließlich Teile von Samsung
Electronics.
x Wenn Sie Teile eines anderen Herstellers verwenden, kann es zu Problemen mit dem Gerät oder zu Verletzungen
kommen, weil das Gerät herunterfällt.
✎Das Aussehen kann sich je nach Gerät unterscheiden.
✎Gehen Sie beim Anschließen des Fernsehgeräts vorsichtig vor, da einige Teile warm werden können.
Aufstellen des Geräts mit dem Standfuß Installation des Geräts mit der Wandhalterung
10 cm 10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Systemsteuerung
[PD490-XN_ZF]BN68-03497E-02L04.indb 5 2011-03-07 오후 5:24:55Deutsch - 6
Fernbedienung
✎Dies ist eine spezielle Fernbedienung für Personen mit beeinträchtigtem Sehvermögen. Die Tasten zum Einstellen des
Senders und die Zifferntasten sind in Braille beschriftet.
Einlegen von Batterien (Batteriegröße: AAA)
Ein- und Ausschalten des Fernsehgeräts.
Anzeigen und Auswählen der verfügbaren
Videosignalquellen.
Zurück zum vorherigen Kanal.
Drücken Sie diese Taste, um den Ton
vorübergehend auszuschalten.
Wechseln des Kanals.
Anzeigen der Senderlisten auf dem Bildschirm.
Anzeigen des elektronischen
Programmführers.
Anzeigen von Informationen auf dem
Bildschirm
u/d/l/r : Bewegen Sie den Cursor über
ein Element des Bildschirmmenüs.
ENTERE: Auswählen des Menüs und
Ändern der entsprechenden Elementwerte.
Schließen des Menüs.
Direkter Zugriff auf die Kanäle.
Einstellen der Lautstärke.
Alternativ wählen Sie “Videotext ein”,
“Doppel”, “Mix” oder “Aus”
Das Bildschirmmenü wird geöffnet.
Hiermit können Sie häufig verwendete
Funktionen schnell auswählen.
Anzeigen der Startseite mit dem Inhalt,
auf der die Optionen Fernsehen, Eigene
Inhalte und Quelle angeboten werden.
Zurück zum vorherigen Menü.
Verwenden Sie diese Tasten bei der Arbeit
im Menü Kanal-Manager, Eigene Inhalte
usw.
Verwenden Sie diese Tasten im Modus
Eigene Inhalte und Anynet+.
P.MODE: Drücken Sie diese Taste zum
Auswählen des Bildmodus.
W: Einstellen des Videos, das mit dem
3D-Signal zur Verfügung gestellt wird.
DUAL f-g: Auswahl von Toneffekten
E-MANUAL: Anzeigen des e-Manuals.
P.SIZE: Auwählen des Bildformats.
AD/SUBT.: Aktivieren/Deaktivieren des
Audiokommentars für Sehgeschädigte (in
manchen Gegenden nicht verfügbar). /
Anzeigen digitaler Untertitel.
[PD490-XN_ZF]BN68-03497E-02L04.indb 6 2011-03-07 오후 5:24:56Deutsch - 7
Ändern der Signalquelle
Quelle
Hiermit wählen Sie, ob das Fernsehgerät mit
einem Fernsehsignal versorgt wird oder an
externe Signaleingänge wie z. B. DVD- / BluRay-Player / Kabelreceiver / Satellitenreceiver
(Set-Top Box) angeschlossen ist.
1. Drücken Sie die Taste SOURCE auf Ihrer
Fernbedienung.
2. Wählen Sie die gewünschte externe Eingangsquelle.
✎Sie können durch Drücken der Taste l oder r für
den Anzeigemodus zwischen Alle und Verbunden
wählen.
■ TV / Ext. / PC / HDMI1/DVI / HDMI2 / HDMI3 / AV /
Component / USB
✎Im Fenster Quelle werden die angeschlossenen
Signalquellen hervorgehoben.
✎Ext. und PC bleiben immer aktiviert.
✎Wenn die angeschlossenen externen Geräte nicht
hervorgehoben werden, drücken Sie den roten Knopf.
Das Fernsehgerät sucht nach angeschlossenen
Geräten.
Name bearb.
Drücken Sie im Fenster Quelle die Taste TOOLS, um die
gewünschten externen Eingangsquellen einzustellen.
■ VCR / DVD / Kabel-STB / Sat-STB / PVR-STB /
AV-Receiver / Spiel / Camcorder / PC / DVI PC /
DVI-Geräte / TV / IPTV / Blu-ray / HD DVD / DMA:
Vergeben Sie Namen für die an die Eingangsbuchsen
angeschlossenen Geräte, um die Auswahl der
Signalquelle zu vereinfachen.
✎Wenn Sie einen PC über ein HDMI-Kabel mit dem
HDMI IN 1(DVI)-Anschluss verbinden, müssen Sie
unter Name bearb. den PC-Modus des Fernsehgeräts
aktivieren. (PS51D490)
✎Wenn Sie einen PC über ein HDMI/DVI-Kabel mit dem
HDMI IN 1(DVI)-Anschluss verbinden, müssen Sie
unter Name bearb. den PC-Modus des Fernsehgeräts
aktivieren. (PS51D490)
✎Wenn Sie einen PC über ein HDMI/DVI-Kabel mit
dem HDMI IN 1(DVI)-Anschluss verbinden, müssen
Sie unter Name bearb. den DVI-Geräte-Modus des
Fernsehgeräts aktivieren. (PS43D490, PS51D490)
Information
Sie können Detailinformationen zum ausgewählten externen
Gerät anzeigen.
Anschließen an eine Antenne
Wenn das Fernsehgerät zum ersten Mal eingeschaltet wird, werden automatisch die Grundeinstellungen vorgenommen.
✎Voreinstellung: Anschließen ans Stromnetz und an die Fernsehantenne.
✎Das Plasmagerät kann Störungen im Amateurfunk- oder Mittelwellenband verursachen.
✎Wenn Sie ein Mobiltelefon mit Zweiwegradio oder Mobilgeräte, die das Amateurfunk- und Mittelwellenband nutzen, in der
Nähe des Fernsehgeräts verwenden, kann dies zu Störungen am Fernseher führen.
Kabel VHF/UHF-Antenne
oder
Netzanschluss
[PD490-XN_ZF]BN68-03497E-02L04.indb 7 2011-03-07 오후 5:24:57Deutsch - 8
Plug & Play (Anfangseinstellung)
Wenn das Fernsehgerät erstmals eingeschaltet wird, helfen eine Reihe aufeinanderfolgender Abfragen beim Durchführen der
Grundeinstellungen. Drücken Sie die Taste POWERP. Plug & Play ist nur verfügbar, wenn die Quelle auf TV eingestellt ist.
✎Stellen Sie vor dem Einschalten des Fernsehgeräts sicher, dass das Antennenkabel angeschlossen ist (S. 6).
✎Um zum vorherigen Schritt zurückzukehren, drücken Sie die rote Taste.
1
Auswählen der Sprache Drücken Sie die Taste ▲ oder ▼, und drücken Sie dann die Eingabetaste
ENTERE.
Wählen Sie die gewünschte Sprache des Bildschirmmenüs (OSD) aus.
2
Auswählen von
Shop-Demo oder
Privatgebrauch
Drücken Sie die Taste ◄ oder ►, und drücken Sie dann die Eingabetaste
ENTERE.
Wählen Sie den Modus Privatgebrauch aus. Der Modus Shop-Demo ist
für den Betrieb in Einzelhandelsgeschäften bestimmt.
Zurücksetzen der Geräteeinstellungen von Shop-Demo auf
Privatgebrauch (Standard): Drücken Sie die Lautstärketaste am
Fernsehgerät. Wenn das Menü „Lautstärke“ angezeigt wird, halten Sie die
Taste MENU 5 Sekunden lang gedrückt.
Shop-Demo ist ausschließlich für den Betrieb in Geschäften bestimmt.
Wenn Sie diese Option dennoch auswählen, stehen einige Funktionen
nicht zur Verfügung. Wählen Sie Privatgebrauch, wenn Sie zuhause
fernsehen möchten.
3
Auswählen eines
Landes
Drücken Sie die Taste ▲ oder ▼, und drücken Sie dann die Eingabetaste ENTERE.
Wählen Sie das gewünschte Land aus. (je nach Land)
✎Nachdem Sie das Land im Menü Land eingestellt haben, werden Sie bei manchen
Modellen aufgefordert, die PIN-Nummer einzurichten.
✎Die Ziffernkombination „0-0-0-0“ dürfen Sie als PIN-Nummer nicht eingeben.
4
Einstellen des
Uhrmodus
Stellen Sie den Uhrmodus automatisch oder manuell ein.
Auto: Wählen Sie Ihre Zeitzone.
Manuell: Hiermit können Sie das Datum und die Uhrzeit manuell einstellen.
5
Auswählen einer
Antenne
Drücken Sie die Taste ▲ oder ▼, und drücken Sie dann die Eingabetaste ENTERE.
Sendertyp zum Speichern auswählen.
6
Auswählen eines
Senders.
Drücken Sie die Taste ▲ oder ▼, und drücken Sie dann die Eingabetaste ENTERE.
Wählen Sie den Sendertyp für den Suchlauf aus. Wenn Sie den Antennentyp auf
Kabel einstellen, können Sie den Sendern im nächsten Schritt einen Zahlenwert
(Senderfrequenzen) zuweisen. Weitere Informationen hierzu finden Sie unter Sender →
Autom. Sendersuchlauf.
7
Gute
Fernsehunterhaltung!
Drücken Sie die Taste ENTERE.
So setzen Sie diese Funktion zurück:
Sie sollten das Plug & Play-Verfahren (MENU → System) zuhause erneut durchführen, selbst wenn Sie es bereits im
Geschäft durchgeführt haben. Wählen Sie System - Plug & Play (Anfangseinstellung). Geben Sie Ihre vierstellige PIN ein.
Die Standard-PIN lautet „0-0-0-0“ (außer Frankreich). Wenn Sie die PIN ändern möchten, verwenden Sie die Funktion PIN
ändern.
✎Wenn Sie den PIN-Code vergessen haben, drücken Sie die Tasten auf der Fernbedienung im Standby-Modus in der
angegebenen Reihenfolge, um die PIN auf „0-0-0-0“ zurückzusetzen: MUTE → 8 → 2 → 4 → POWER (ein).
P
POWER
[PD490-XN_ZF]BN68-03497E-02L04.indb 8 2011-03-07 오후 5:24:57Deutsch - 9
Anschließen an ein AV-Gerät
¦
Verfügbare Geräte: DVD, Blu-ray-Player, HD-Kabelreceiver, HD-Satellitenreceiver,
Videorekorder
Mit Hilfe eines HDMI- oder HDMI/DVI-Kabels (bis zu 1080p)
✎HDMI IN 1(DVI), 2, 3 / PC/DVI AUDIO IN
x Eine Verbindung über HDMI/DVI-Kabel kann nur über den Videoanschluss HDMI IN 1(DVI) erfolgen. DVDPlayer, Blu-ray-Player, HD-Kabelreceiver, HD-Satellitenreceiver, Kabelreceiver oder Satellitenreceiver erfordern
möglicherweise ein DVI/HDMI-Kabel (DVI-zu-HDMI) oder einen DVI/HDMI-Adapter (DVI-zu-HDMI). Die PC/DVI
AUDIO IN-Buchse wird für den Audioanschluss benötigt.
x Das Bild wird möglicherweise nicht normal (wenn überhaupt) angezeigt oder es erfolgt keine Tonausgabe, wenn
ein externes Gerät an den Fernseher angeschlossen wird, das eine ältere HDMI-Version verwendet. Wenn solch
ein Problem auftritt, erfragen Sie die HDMI-Version beim Hersteller des externen Geräts und bitten Sie, wenn
veraltet, um ein Upgrade.
x Achten Sie darauf, nur ein zertifiziertes HDMI-Kabel zu kaufen. Andernfalls kann es passieren, dass kein Bild
angezeigt wird oder ein Verbindungsfehler auftritt.
USB HDMI IN
HDMI OUT
DVI OUT
AUDIO OUT
R-AUDIO-L
W R
HDMI-Anschluss
HDMI/DVI-Anschluss
[PD490-XN_ZF]BN68-03497E-02L04.indb 9 2011-03-07 오후 5:24:58Deutsch - 10
Mit Hilfe eines Komponentenkabels (bis 1080p) oder eines Audio/Video-Kabels (nur 480i) und eines Scartkabels
✎Im Modus Ext. unterstützt DTV Out nur MPEG SD-Video und -Audio.
✎Bei Anschluss an AV IN stimmt die Farbe des Anschlusses AV IN [Y/VIDEO] (grün) nicht mit der des Videokabels
(gelb) überein.
✎Um die beste Bildqualität zu erhalten, wird eine Komponentenverbindung über den A/V-Anschluss empfohlen.
AUDIO OUT
R-AUDIO-L
VIDEO OUT
AUDIO OUT
R-AUDIO-L
PR PB Y
COMPONENT OUT
EXT
Komponentenanschluss
AV-Anschluss
SCART-Anschluss
[PD490-XN_ZF]BN68-03497E-02L04.indb 10 2011-03-07 오후 5:24:58Deutsch - 11
Anschließen an einen PC und ein Audiogerät
¦ Verfügbare Geräte: Digital-Audiosystem, Verstärker, DVD-Heimkino, PC
Mit Hilfe des optischen Anschlusses (digital) oder des Anschlusses für die Kopfhörer
✎DIGITAL AUDIO OUT (OPTICAL)
x Wenn ein Digital-Audiosystem mit dem DIGITAL AUDIO OUT (OPTICAL)-Anschluss verbunden ist, reduzieren Sie
die Lautstärke von Fernsehgerät und System.
x 5.1-Kanalton ist möglich, wenn das Fernsehgerät an ein externes Gerät angeschlossen ist, das 5.1-Kanalton
unterstützt.
x Wenn der Receiver (Heimkinosystem) angeschaltet ist, können Sie den Ton hören, der vom optischen Ausgang
des Fernsehgeräts zur Verfügung gestellt wird. Wenn das Fernsehgerät ein (terrestrisches) DTV-Signal empfängt,
überträgt das Fernsehgerät 5.1-Kanalton an den Receiver des Heimkinosystems. Wenn es sich bei der Signalquelle
um eine digitale Komponente wie beispielsweise einen DVD-Player/Blu-Ray-Player/Kabel- /Satellitenreceiver (SetTop-Box) handelt, der über HDMI an das Fernsehgerät angeschlossen ist, kann der Receiver des Heimkinosystems
nur Zweikanalton wiedergeben. Wenn Sie 5.1-Kanalton wünschen, müssen Sie den digitalen Ausdioausgang am
DVD-/Blu-Ray-Player / Kabel- / Satellitenreceiver (Set-Top-Box) direkt an einen Verstärker oder ein Heimkinosystem
anschließen.
✎Kopfhörer H: Sie können Ihre Kopfhörer an den Kopfhörer-Ausgang Ihres Fernsehgeräts anschließen. Wenn
Kopfhörer angeschlossen sind, ist die Tonwiedergabe über die eingebauten Lautsprecher ausgeschaltet.
x Wenn Sie Kopfhörer an das Fernsehgerät anschließen, ist die Tonfunktion eingeschränkt.
x Die Lautstärke der Kopfhörer und des Fernsehgeräts werden getrennt geregelt.
OPTICAL
Anschluss für DVD-Heimkinosystem
Kopfhöreranschluss
[PD490-XN_ZF]BN68-03497E-02L04.indb 11 2011-03-07 오후 5:24:59Deutsch - 12
¦ Mit Hilfe eines HDMI-, HDMI/DVI- oder D-Sub-Kabels
✎Der Anschluss über ein HDMI-Kabel wird je nach PC möglicherweise nicht unterstützt.
Anzeigemodi (D-Sub- und HDMI/DVI-Eingang)
• PS43D490: 1024 x 768 bei 60Hz
• PS51D490: 1360 x 768 bei 60Hz
Modus Auflösung
Horizontalfrequenz
(kHz)
Vertikalfrequenz
(Hz)
Pixeltakt (MHz)
Synchronisationspolarität
(H/V)
PS43D490 PS51D490
IBM
640 x 350
720 x 400
31,469
31,469
70,086
70,087
25,175
28,322
+/-
-/+
c
c
c
c
MAC
640 x 480
832 x 624
35,000
49,726
66,667
74,551
30,240
57,284
-/-
-/-
c
c
c
c
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1360 x 768
31,469
37,861
37,500
37,879
48,077
46,875
48,363
56,476
60,023
47,712
59,940
72,809
75,000
60,317
72,188
75,000
60,004
70,069
75,029
60,015
25,175
31,500
31,500
40,000
50,000
49,500
65,000
75,000
78,750
85,500
-/-
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+/+
+/+
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
✎HINWEIS
x Bei Anschluss über ein HDMI/DVI-Kabel müssen Sie den HDMI IN 1(DVI)-Anschluss verwenden.
x Das Zeilensprungverfahren wird nicht unterstützt.
x Das Fernsehgerät funktioniert möglicherweise nicht ordnungsgemäß, wenn kein Standardmodus ausgewählt
wird.
x Separate- und Composite-Modus werden unterstützt. SOG (Sync On Green) wird nicht unterstützt.
PC OUT AUDIO OUT AUDIO OUT DVI OUT HDMI OUT
PC-Anschluss
[PD490-XN_ZF]BN68-03497E-02L04.indb 12 2011-03-07 오후 5:25:00Deutsch - 13
Anschließen an den COMMON INTERFACE-Steckplatz
Verwenden der „CI“- oder „CI+“-Karte
Um Bezahlsender zu sehen, müssen Sie eine „CI“ oder „CI+“-Karte
einsetzen.
• Wenn Sie keine „CI“ oder „CI+“-Karte einsetzen, wird bei einigen
Kanälen die Meldung „Gestörtes Signal“ angezeigt.
• Die Verbindungsinformationen mit Telefonnummer, Kennung der
„CI“ oder „CI+“-Karte, Hostkennung und anderen Angaben wird
nach ungefähr 2 bis 3 Minuten angezeigt. Wenn eine Fehlermeldung
angezeigt wird, wenden Sie sich bitte an Ihren Dienstanbieter.
• Wenn die Kanalinformationskonfiguration abgeschlossen ist, wird
die Meldung „Udating Completed“ Aktualisierung abgeschlossen)
angezeigt. Dies bedeutet, dass die Kanalliste aktualisiert ist.
✎HINWEIS
x Sie können die „CI“ oder „CI+“-Karte bei einem der örtlichen Kabelnetzbetreiber erwerben.
x Ziehen Sie die „CI“- oder „CI+“-Karte vorsichtig mit den Händen heraus. Sie könnte beim Herunterfallen ansonsten
beschädigt werden.
x Die Richtung, in der Sie die „CI“ oder „CI+“-Karte einsetzen müssen, ist auf der Karte markiert.
x Die Position des COMMON INTERFACE-Steckplatzes ist modellabhängig.
x „CI“ oder „CI+“-Karten werden in einigen Ländern und Regionen nicht unterstützt. Fragen Sie diesbezüglich Ihren
offiziellen Händler.
x Wenden Sie sich bei Problemen an den Dienstanbieter.
x Setzen Sie eine „CI“ oder „CI+“-Karte ein, die für die aktuellen Antenneneinstellungen geeignet ist. Andernfalls ist das
Bild gestört oder es fällt aus.
[PD490-XN_ZF]BN68-03497E-02L04.indb 13 2011-03-07 오후 5:25:00Deutsch - 14
So zeigen Sie das e-Manual an
Bildschirmanzeige
So wechseln Sie zwischen dem e-Manual und den entsprechenden Menüs.
✎Diese Funktion steht in einigen Menüs nicht zur Verfügung.
Methode 1 Methode 2
1. Wählen Sie mit der roten Taste Jetzt test., wenn Sie die
entsprechenden Menüs ausführen möchten.
2. Drücken Sie die Taste E-MANUAL, um zum Fenster des
e-Manuals zurückzukehren.
1. Wählen Sie mit der Taste ENTERE das Inhaltsfenster
aus. Die Meldung „Möchten Sie dies ausführen?“ wird
angezeigt. Wählen Sie Ja aus, und drücken Sie die Taste
ENTERE. Das Bildschirmmenü wird angezeigt.
2. Drücken Sie die Taste E-MANUAL, um zum Fenster des
e-Manuals zurückzukehren.
Sie können die Einleitung und die Anweisungen zu den TV-Funktionen auch in
elektronischer Form auf Ihrem Fernsehgerät lesen.
O MENUm→ Unterstützung → e-Manual → ENTERE
✎Drücken Sie die Taste E-MANUAL auf der Fernbedienung, um zum e-Manual zurückzukehren.
✎Wenn das Menü deaktiviert ist, können Sie die Funktion Jetzt test. nicht verwenden.
Grundfunktionen
Ändern des voreingestellten Bildmodus
Anpassen der Bildeinstellungen
Ändern des Bildformats
Ändern der Bildoptionen
Einstellen des Fernsehgeräts mithilfe Ihres PCs
} Index E Eingabe e Beenden
Fernsehbildschirm: Anzeigen des
Bilds der aktuellen Eingangsquelle.
Ändern Sie die Kategorie. Drücken
Sie die Taste l oder r, um die
gewünschte Kategorie auszuwählen.
Anzeigen der Untermenüliste Drücken
Sie die Taste ENTERE, um das
gewünschte Untermenü auszuwählen.
Bedientasten:
}Blau (Index): Anzeigen des Index-Fensters.
E Eingabe: Wählen Sie eine Kategorie oder ein
Untermenü.
eExit: Schließen des e-Manuals.
E-MANUAL
Jetzt test.
E-MANUAL
Ändern des voreingestellten Bildmodus
■
Wählen Sie Ihren bevorzugten Bildtyp aus.
Bildmodus t
• Dynamisch: Für helle Zimmer geeignet.
• Standard: Für normale Umgebungen geeignet.
• Natürlich für LED-Fernsehgeräte / Entspannen für Plasmafernsehgeräte : Für geringe
Augenbelastung geeignet.
• Film: Zum Anzeigen von Filmen in einem abgedunkelten Zimmer geeignet.
• Unterhalt.: Zum Anzeigen von Filmen und Spielen geeignet.
N Diese Funktion ist nur im PC-Modus verfügbar.
Ändern des voreingestellten Bildmodus
O MENUm → Bild → Bildmodus → ENTERE
■ Bildmodus
Wählen Sie Ihren bevorzugten Bildtyp aus.
N Wenn als Signalquelle PC eingestellt ist, können Sie im Bildmodus nur
zwischen Standard und Unterhalt. wählen.
• Dynamisch: Für helle Zimmer geeignet.
• Standard: Für normale Umgebungen geeignet.
• Film: Zum Anzeigen von Filmen in einem abgedunkelten Zimmer geeignet.
• Unterhalt.: Zum Anzeigen von Filmen und Spielen geeignet.
Grundfunktionen > Ändern des voreingestellten Bildmodus (5/10)
a Jetzt test. b Start { Zoom } Index L Seite e Beenden
Bild
Bildmodus : Standard r
Zellhelligkeit : 10
Kontrast : 100
Helligkeit : 45
Schärfe : 50
Farbe : 50
Farbton (G/R) : G50/R50
Bildschirmanpassung
[PD490-XN_ZF]BN68-03497E-02L04.indb 14 2011-03-07 오후 5:25:07Deutsch - 15
Anzeigen der Inhalte
Verwenden des Zoommodus
Wenn Sie das e-Manual anzeigen, können Sie das Fenster
mit der gelben Taste vergrößern. Mit der Taste u oder d
können Sie durch das vergrößerte Fenster blättern.
✎Um zum vorherigen Menü zurückzukehren, drücken Sie
die Taste RETURN.
So suchen Sie mithilfe der Indexseite nach einen Stichwort
✎Diese Funktion wird, je nach Sprache, möglicherweise nicht unterstützt.
1. Wenn Sie nach einem Stichwort suchen möchten, wählen Sie mit der blauen Taste Index.
2. Wählen Sie mit der Taste l oder r den Anfangsbuchstaben des gewünschten Stichworts aus, und drücken Sie dann die
Taste ENTERE.
3. Wählen Sie mit der Taste u oder d das gewünschte Stichwort aus, und drücken Sie dann die Taste ENTERE.
4. Sie können das Fenster der entsprechenden Anweisung im e-Manual anzeigen.
✎Drücken Sie die Taste RETURN, um das Index-Fenster zu schließen.
R Zurück
Ändern des voreingestellten Bildmodus
O MENUm → Bild → Bildmodus → ENTERE
■ Bildmodus
Wählen Sie Ihren bevorzugten Bildtyp aus.
N Wenn als Signalquelle PC eingestellt ist, können Sie im Bildmodus nur zwischen
Standard und Unterhalt. wählen.
• Dynamisch: Für helle Zimmer geeignet.
• Standard: Für normale Umgebungen geeignet.
• Film: Zum Anzeigen von Filmen in einem abgedunkelten Zimmer geeignet.
• Unterhalt.: Zum Anzeigen von Filmen und Spielen geeignet.
a Jetzt test. b Start { Zoom } Index L Seite e Beenden
Grundfunktionen > Ändern des voreingestellten Bildmodus (5/10)
Inhaltsfenster: Wenn Sie ein Untermenü auswählen,
können Sie die entsprechenden Inhalte anzeigen.
Mit der Taste l oder r wechseln Sie zur
vorherigen oder zur nächsten Seite.
Bedientasten:
aRot (Jetzt test.): Anzeigen der entsprechenden Menüs.
b Grün (Start): Wechseln zum Startfenster des e-Manuals.
{ Gelb (Zoom): Vergrößern des Fensters.
}Blau (Index): Anzeigen des Index-Fensters.
L (Seite): Wechseln zur vorherigen oder zur nächsten Seite.
Ändern des voreingestellten Bildmodus
O MENUm → Bild → Bildmodus → ENTERE
■ Bildmodus
Wählen Sie Ihren bevorzugten Bildtyp aus.
N Wenn als Signalquelle PC eingestellt ist, können Sie im
Bildmodus nur zwischen Standard und Unterhalt. wählen.
• Dynamisch: Für helle Zimmer geeignet.
• Standard: Für normale Umgebungen geeignet.
• Film: Zum Anzeigen von Filmen in einem abgedunkelten Zimmer
geeignet.
• Unterhalt.: Zum Anzeigen von Filmen und Spielen geeignet.
[PD490-XN_ZF]BN68-03497E-02L04.indb 15 2011-03-07 오후 5:25:08Deutsch - 16
Anbringen der Wandhalterung
Anbringen der Wandhalterung
Mit der (separat erhältlichen) Wandhalterung können Sie das Fernsehgerät an einer Wand befestigen.
Detaillierte Informationen zum Montieren der Wandhalterung finden Sie in den Anweisungen, die im Lieferumfang der
Wandhalterung enthalten sind. Lassen Sie sich beim Anbringen der Wandhalterung von einem Techniker helfen.
Samsung Electronics haftet nicht für Schäden an Gerät oder Personen, wenn die Montage vom Kunden selbst durchgeführt
wird.
Spezifikation (VESA) der Wandhalterung
✎Die Wandhalterung wird nicht mitgeliefert, ist aber gesondert erhältlich.
Montieren Sie die Wandhalterung an einer soliden Wand, die senkrecht zum Boden steht. Bei Installation auf anderen
Trägermaterialien wenden Sie sich bitte an Ihren Fachhändler. Bei Montage an einer Decke oder schrägen Wand kann das
Fernsehgerät herunterfallen und zu Verletzungen führen.
✎HINWEIS
x Die Standardabmessungen der Wandhalterung finden Sie in der nachfolgenden Tabelle.
x Beim Kauf unserer Wandhalterung erhalten Sie ein detailliertes Installationshandbuch sowie alle für die Montage
erforderlichen Teile.
x Verwenden Sie keine Schrauben, die nicht der VESA-Standardspezifikation für Schrauben entsprechen.
x Verwenden Sie keine Schrauben, die länger sind als in der VESA-Standardspezifikation für Schrauben angegeben.
Zu lange Schrauben können Schäden an den inneren Bauteilen des Fernsehgeräts verursachen.
x Bei Wandhalterungen, die nicht der VESA-Standardspezifikation für Schrauben entsprechen, hängt die Länge der
Schrauben von der Spezifikation der Wandhalterung ab.
x Ziehen Sie die Schrauben nicht zu fest an, weil Sie auf diese Weise das Gerät beschädigen könnten oder weil das
Gerät dadurch herunterfallen und damit Verletzungen verursachen könnte. Samsung haftet nicht bei derartigen
Unfällen.
x Samsung haftet nicht für Geräteschäden oder Verletzungen, wenn eine Wandhalterung verwendet wird, die nicht
dem VESA-Standard entspricht oder nicht spezifiziert ist, oder wenn der Verbraucher die Installationsanleitung für
das Produkt nicht befolgt.
x Montieren Sie das Fernsehgerät nicht in einem Winkel von mehr als 15 Grad.
Produktfamilie Zoll
VESASpezifikation
(A * B)
Standardschraube Menge
Plasmabildschirm
43~51 400 X 400
M8 4
59~64 600 X 400
✎Lösen Sie die Schrauben des Lochkreises, ehe Sie die Wandhalterung an
der Wand befestigen.
Installieren Sie die Wandhalterung nicht bei eingeschaltetem Fernsehgerät. Sie könnten dabei einen
Stromschlag erhalten und sich verletzen.
[PD490-XN_ZF]BN68-03497E-02L04.indb 16 2011-03-07 오후 5:25:08Deutsch - 17
Fehlerbehebung
Bei Fragen zum Fernsehgerät schauen Sie zuerst in dieser Liste nach. Wenn keiner dieser Tipps zur
Fehlerbehebung weiterhilft, öffnen Sie die Website „www.samsung.com“ und klicken Sie dort auf „Support“ oder
wenden Sie sich an das in der Liste auf der letzten Seite angegebene Callcenter.
Probleme Lösungen und Erklärungen
Der Fernseher kann nicht eingeschaltet
werden.
• Vergewissern Sie sich, dass das Netzkabel sicher mit der Wandsteckdose und dem Fernsehgerät
verbunden ist.
• Vergewissern Sie sich, dass die Netzsteckdose Strom liefert.
• Drücken Sie die Taste POWER am Fernsehgerät, um zu prüfen, ob die Fernbedienung richtig funktioniert.
Wenn das Fernsehgerät angeht, lesen Sie den Abschnitt „Die Fernbedienung funktioniert nicht“ weiter
unten.
Kein Bild/Video. • Überprüfen Sie die Kabelverbindungen. Unterbrechen Sie kurzzeitig alle Kabelverbindungen zwischen dem
Fernsehgerät und den externen Geräten.
• Stellen Sie den Videoausgang Ihres externen Geräts (Kabel-/Satellitenreceiver, DVD-/Blu-ray-Player usw.)
so ein, dass er zur Verbindung mit dem Fernsehgerät passt. Zum Beispiel: Wenn der HDMI-Ausgang des
externen Geräts verwendet wird, schließen Sie es an den HDMI-Eingangs Ihres Fernsehers an.
• Stellen Sie sicher, dass die angeschlossenen Geräte eingeschaltet sind.
• Vergewissern Sie sich, dass die richtige Signalquelle für den Fernseher eingestellt ist. Drücken Sie dazu die
Taste SOURCE auf der Fernbedienung.
Die Fernbedienung funktioniert nicht. • Ersetzen Sie die Batterien der Fernbedienung, und achten Sie dabei auf die richtige Polung (+/-).
• Reinigen Sie das Sendefeld der Fernbedienung.
• Zeigen Sie mit der Fernbedienung aus 1,5 bis 2 m Entfernung direkt auf das Fernsehgerät.
Die Fernbedienung des Kabel-/
Satellitenreceivers schaltet das Fernsehgerät
nicht ein/aus oder regelt auch nicht die
Lautstärke.
• Programmieren Sie die Fernbedienung des Kabel-/Satellitenreceivers so, dass sie das Fernsehgerät
anspricht. Den Code für SAMSUNG TV finden Sie in der Bedienungsanleitung für Ihren Kabel-/
Satellitenreceiver.
✎Manche der obigen Abbildungen und Funktionen gibt es nur bei bestimmten Modellen.
✎Sie können den optimalen Zustand Ihres Fernsehgeräts erhalten, indem Sie die aktuelle Firmware per USB von der
Website (samsung.com → Unterstützung → Downloads) herunterladen.
Lizenz
Liste der Funktionen
Hervorragende digitale Schnittstelle und Netzwerkverbindung: Mit dem eingebauten digitalen HDTV-Tuner können Sie
unverschlüsselte HDTV-Sendungen ohne zusätzlichen Kabel-/Satellitenreceiver empfangen.
3D
Mit dieser aufregenden neuen Funktion können Sie Inhalte räumlich anzeigen.
Anynet+ (HDMI-CEC)
Dabei handelt es sich um eine Funktion, mit der Sie alle angeschlossenen Samsung-Geräte, die Anynet+ unterstützen, mit der
Fernbedienung für Ihr Samsung-Fernsehgerät steuern können.
Eigene Inhalte
Hiermit können Sie Musikdateien, Bilder und Filme abspielen, die auf einem USB-Gerät gespeichert sind.
[PD490-XN_ZF]BN68-03497E-02L04.indb 17 2011-03-07 오후 5:25:09Deutsch - 18
Befestigen des Fernsehgeräts an der Wand
Achtung: Das Fernsehgerät kann hinfallen, wenn Sie daran ziehen, es schieben oder darauf klettern. Stellen
Sie insbesondere sicher, dass sich keine Kinder an das Gerät hängen oder es aus dem Gleichgewicht bringen.
Anderenfalls könnte das Gerät umkippen und zu schweren Verletzungen oder dem Tod führen. Beachten Sie
alle Anweisungen der beigefügten Sicherheitshinweise. Noch mehr Stabilität und Sicherheit erreichen Sie,
wenn Sie den Kippschutz installieren. Gehen Sie dazu folgendermaßen vor.
So verhindern Sie, dass das Fernsehgerät umkippt
1. Stecken Sie die Schrauben durch die Halterungen und befestigen Sie sie fest an
der Wand. Vergewissern Sie sich, dass die Schrauben gut halten.
✎Je nach Ausführung der Wand benötigen Sie zum Befestigen weiteres
Material, wie z. B. Dübel.
✎Da die benötigten Halterungen, Schrauben und das Band nicht zum
Lieferumfang gehören, müssen Sie diese Teile gesondert erwerben.
2. Entfernen Sie die Schrauben in der Mitte auf der Rückseite des Fernsehgeräts.
Setzen Sie diese Schrauben in die Halterungen ein, und befestigen Sie die
Schrauben dann wieder am Fernsehgerät.
✎Die Schrauben werden möglicherweise nicht zusammen mit dem Gerät
geliefert. Kaufen Sie in diesem Fall Schrauben entsprechend den folgenden
Angaben.
3. Verbinden Sie die Halterungen an der Wand und die Halterung am Fernsehgerät
mit einem festen Kabel miteinander, und ziehen Sie es dann fest.
✎HINWEIS
x Stellen Sie das Fernsehgerät in der Nähe der Wand auf, damit es nicht nach hinten kippen kann.
x Es ist noch sicherer, wenn die Halterungen an der Wand niedriger als die Halterungen am Fernsehgerät sind.
x Lösen Sie das Band, ehe Sie den Fernseher bewegen.
4. Kontrollieren Sie, ob alle Befestigungen ordnungsgemäß gesichert sind. Prüfen Sie regelmäßig die Verbindungen auf
Zeichen von Ermüdung oder Versagen. Bei Zweifeln hinsichtlich der Sicherheit Ihrer Halterungen wenden Sie sich an
einen professionellen Installationsbetrieb.
Lagerung und Wartung
✎Wenn Sie Aufkleber auf dem Bildschirm des Fernsehgeräts anbringen, bleiben nach dem Entfernen Kleberückstände
zurück. Entfernen Sie diese, bevor Sie fernsehen.
Sprühen Sie kein Wasser oder Reinigungsmittel direkt auf
das Gerät. Jede Flüssigkeit, die in das Gerät eindringt,
kann zu einer Funktionsstörung, einem Brand oder einem
Stromschlag führen.
Reinigen Sie das Gerät mit einem weichen Tuch, das Sie
vorher mit einer kleinen Menge Wasser anfeuchten.
Wand
[PD490-XN_ZF]BN68-03497E-02L04.indb 18 2011-03-07 오후 5:25:10Deutsch - 19
Technische Daten
Umgebungsbedingungen
Betriebstemperatur
Luftfeuchtigkeit (bei Betrieb)
Temperatur (Lagerung)
Luftfeuchtigkeit (Lagerung)
10° C bis 40° C (50°F bis 104°F)
10% bis 80%, nicht kondensierend
-20° C bis 45° C (-4°F bis 113°F)
5% bis 95%, nicht kondensierend
TV-System Analog: B/G, D/K, L, I (je nach eingestelltem Land)
Digital: DVB-T/DVB-C
Fernsehnorm/Videosystem: Analog: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60
Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0
Audiosystem BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC.
HDMI IN Video: 1080 24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: 2-Kanal-Linear-PCM 32/44.1/48 kHz, 16/20/24 Bit.
Drehbarer Fuß (Links / Rechts) -20˚ ~ 20˚
Modellname PS43D490 PS51D490
Bildschirmgröße 43 Zoll (109 cm) 51 Zoll (128 cm)
Ton
(Ausgang) 10 W x 2
Abmessungen (BxTxH)
Gehäuse
Mit Fuß
1011,8 X 56,0 X 622,4 mm
1011,8 X 305,0 X 698,7 mm
1187,8 X 56,0 X 706,6 mm
1187,8 X 305,0 X 782,9 mm
Gewicht
Ohne Fuß
Mit Fuß
16,0 kg
20,3 kg
22,5 kg
26,8 kg
Anzeigeauflösung 1024 X 768 1360 X 768
✎Änderungen der technischen Daten und des Geräte-Designs vorbehalten.
✎Die technischen Daten zur benötigten Netzspannung und zum Energieverbrauch finden Sie auf dem Etikett am Produkt.
✎Hiermit erklärt Samsung, dass sich das Gerät PDP TV in Übereinstimmung mit den grundlegenden Anforderungen und
den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
[PD490-XN_ZF]BN68-03497E-02L04.indb 19 2011-03-07 오후 5:25:10Nederlands - 2
Voor meer informatie over het gebruik van de E-handleiding (pag.14)
De figuren en illustraties in deze gebruikershandleiding dienen alleen ter referentie en kunnen afwijken van
het werkelijke uiterlijk van het product. Het ontwerp en de specificaties van het product kunnen zonder
kennisgeving worden gewijzigd.
Opmerking over digitale tv
1. Functionaliteit betreffende digitale televisie (DVB) is alleen beschikbaar in landen/gebieden waar digitale DVB-T-televisiesignalen (MPEG2 en MPEG4
AVC) per zendmast worden uitgezonden of waar u toegang hebt tot een compatibele DVB-C-service (MPEG2 en MPEG4 AAC) voor kabel-tv.
Informeer bij een lokale dealer of u DVB-T- of DVB-C-signalen kunt ontvangen.
2. DVB-T is de Europese DVB-consortiumnorm voor de uitzending van digitale televisie per zendmast en DVB-C voor de uitzending van digitale
televisie over de kabel. Bepaalde specifieke functies, zoals EPG (Elektronische programmagids), VOD (Video on Demand) enzovoort, zijn echter niet
opgenomen in deze specificatie. Deze werken dus op dit moment nog niet.
3 Hoewel dit televisietoestel voldoet aan de huidige DVB-T- en DVB-C-normen vanaf [augustus 2008], kan de compatibiliteit met toekomstige digitale
DVB-T-signalen via de zendmast en digitale DVB-C-signalen via de kabel niet worden gegarandeerd.
4. Afhankelijk van de landen/gebieden waar dit televisietoestel wordt gebruikt, kunnen leveranciers van kabeltelevisie aanvullende kosten voor dergelijke
services in rekening brengen en moet u wellicht akkoord gaan met hun voorwaarden en bepalingen.
5. Bepaalde digitale televisiefuncties zijn mogelijk niet beschikbaar in bepaalde landen of regio’s en DVB-C werkt mogelijk niet goed met bepaalde
leveranciers van kabelservices.
6. Neem voor meer informatie contact op met de klantendienst van Samsung.
✎ De ontvangstkwaliteit van televisie-uitzendingen kan minder goed zijn door verschil in uitzendmethode tussen landen. Controleer de
televisieprestaties bij uw plaatselijke geautoriseerde SAMSUNG-dealer of bel de klantenservice van Samsung om te informeren of u de kwaliteit
kunt verbeteren door de tv-instellingen aan te passen.
Instructies voor gebruik
• Beeldretentie
Geef een stilstaand beeld (bijvoorbeeld van een videospel) niet langer dan enkele minuten op het plasmascherm weer, omdat dit beeldretentie kan
veroorzaken. Beeldretentie wordt ook wel ‘inbranden’ genoemd. Verlaag bij de weergave van een stilstaand beeld de helderheid en het contrast om
beeldretentie te voorkomen.
• Warmte op de bovenkant van de plasma-tv
De bovenkant van het scherm kan na een lange gebruiksperiode erg warm worden, omdat de warmte van het scherm zich door het ventilatiegat aan
de bovenkant van het toestel verspreidt.
Dit is normaal en duidt niet op een defect of storing.
Zorg dat kinderen de bovenkant van het product niet kunnen aanraken.
• Het product maakt een ‘krakend’ geluid.
Een ‘krakend’ geluid kan optreden als het product uitzet of inkrimpt door een verandering in de omgeving, zoals de temperatuur of de
luchtvochtigheid. Dit is normaal en duidt niet op een defect.
• Celdefecten
Het plasmascherm gebruikt een paneel dat bestaat uit 2.360.000 (HD-niveau) tot 6.221.000 (FHD-niveau) pixels, wat het gebruik van geavanceerde
productietechnologie vereist. Het scherm kan echter enkele heldere of donkere pixels bevatten. Deze pixels zijn niet van invloed op de prestaties van
het product.
• Gebruik de tv niet bij een temperatuur lager dan 5°C
• Als u een stilstaand beeld te lang op het scherm weergeeft, kan plasmascherm permanent beschadigd raken.
Als u gedurende langere tijd naar uw plasma-tv kijkt terwijl het beeld in 4:3-formaat wordt weergegeven, kunnen aan de linker- en
rechterkant en in het midden van het scherm randen achterblijven. Hetzelfde effect kan optreden wanneer u een dvd afspeelt of een
spelcomputer gebruikt.
Schade ontstaan door het bovengenoemde effect valt niet onder de garantie.
• Scherminbranding.
Het gedurende langere tijd weergeven van stilstaande beelden van dvd’s of computerspellen kan (gedeeltelijke) scherminbranding tot gevolg hebben.
Om dit te voorkomen, kunt u tijdens het langdurig weergeven van stilstaande beelden de ‘helderheid’ en het ‘contrast’ verminderen.
• Garantie
De garantievoorwaarden gelden niet voor schade veroorzaakt door beeldretentie.
Het inbranden van het scherm valt niet onder de garantievoorwaarden.
Correcte verwijdering van dit product (elektrische & elektronische afvalapparatuur)
Dit merkteken op het product, de accessoires of het informatiemateriaal duidt erop dat het product en zijn elektronische accessoires (bv.
lader, headset, USB-kabel) niet met ander huishoudelijk afval verwijderd mogen worden aan het einde van hun gebruiksduur. Om mogelijke
schade aan het milieu of de menselijke gezondheid door ongecontroleerde afvalverwijdering te voorkomen, moet u deze artikelen van
andere soorten afval scheiden en op een verantwoorde manier recyclen, zodat het duurzame hergebruik van materiaalbronnen wordt
bevorderd. Huishoudelijke gebruikers moeten contact opnemen met de winkel waar ze dit product hebben gekocht of met de gemeente
waar ze wonen om te vernemen waar en hoe ze deze artikelen milieuvriendelijk kunnen laten recyclen. Zakelijke gebruikers moeten
contact opnemen met hun leverancier en de algemene voorwaarden van de koopovereenkomst nalezen. Dit product en zijn elektronische
accessoires mogen niet met ander bedrijfsafval voor verwijdering worden gemengd.
Correcte behandeling van een gebruikte accu uit dit product
(Van toepassing op de Europese Unie en andere Europese landen met afzonderlijke inzamelingssystemen voor accu’s en
batterijen.)
Dit merkteken op de accu, handleiding of verpakking geeft aan dat de accu in dit product aan het einde van de levensduur niet samen
met ander huishoudelijk afval mag worden weggegooid. De chemische symbolen Hg, Cd of Pb geven aan dat het kwik-, cadmium- of
loodgehalte in de accu hoger is dan de referentieniveaus in de Richtlijn 2006/66/EC. Indien de gebruikte accu niet op de juiste wijze
wordt behandeld, kunnen deze stoffen schadelijk zijn voor de gezondheid van mensen of het milieu. Ter bescherming van de natuurlijke
hulpbronnen en ter bevordering van het hergebruik van materialen, verzoeken wij u afgedankte accu’s en batterijen te scheiden van andere
soorten afval en voor recycling aan te bieden bij het gratis inzamelingssysteem voor accu’s en batterijen in uw omgeving.
[PD490-XN_ZF]BN68-03497E-02L04.indb 2 2011-03-07 오후 5:25:11Nederlands - 3
Accessoires
✎Controleer of de volgende onderdelen bij uw tv geleverd zijn. Neem contact op met uw verkoper als er
onderdelen ontbreken.
✎De vorm en kleur van de items kunnen enigszins afwijken. Dit is afhankelijk van het model.
✎Kabels die niet bij het product worden geleverd, kunnen apart worden aangeschaft.
✎Controleer of er geen accessoire is achtergebleven in het verpakkingsmateriaal in de doos.
[LET OP: STEVIG BEVESTIGEN ZODAT DE ADAPTER GOED IS VASTGEKOPPELD
• Afstandsbediening en batterijen (AAA x 2) • Netsnoer
• Gebruikershandleiding • Schoonmaakdoekje
• Garantiekaart (niet op alle locaties beschikbaar) / Veiligheidsvoorschriften
alleen 43-inch model
Ferrietkern (2EA)
✎Ferrietkern voor netsnoer: De ferrietkernen worden gebruikt om de kabels af te
schermen van interferentie. Open de ferrietkern bij het aansluiten van een kabel en
klem deze om de kabel bij de plug, zoals wordt weergegeven in de afbeelding.
x A Minimale afstand tussen de ferrietkern en het uiteinde van het snoer in de tv:
6~8 inch (15~20 cm)
x B Maximale afstand tussen de ferrietkern en het uiteinde van het snoer dat op de
stroom is aangesloten: 3/4 inch (2 cm)
Netsnoer
A B
[PD490-XN_ZF]BN68-03497E-02L04.indb 3 2011-03-07 오후 5:25:11Nederlands - 4
alleen 51-inch model
Ferrietkern (2EA) Ferrietkern (1EA)
✎Ferrietkern voor netsnoer: De ferrietkernen worden gebruikt om de kabels af te
schermen van interferentie. Open de ferrietkern bij het aansluiten van een kabel en
klem deze om de kabel bij de plug, zoals wordt weergegeven in de afbeelding.
x A Minimale afstand tussen de ferrietkern en het uiteinde van het snoer in de tv:
6~8 inch (15~20 cm)
x B Maximale afstand tussen de ferrietkern en het uiteinde van het snoer dat op
de stroom is aangesloten: 3/4 inch (2 cm)
Netsnoer
✎Ferrietkern: De ferrietkernen worden gebruikt om de kabels af te schermen van
interferentie. Open de ferrietkern bij het aansluiten van een kabel en klem deze om
de kabel bij de plug, zoals wordt weergegeven in de afbeelding.
Antennekabel /
componentkabel
(afzonderlijk
verkrijgbaar)
• In de volgende gevallen kunnen administratiekosten in rekening worden gebracht:
– (a) Er wordt op uw verzoek een engineer gestuurd, maar het product is niet defect
(wanneer u deze gebruikershandleiding niet hebt gelezen).
– (b) U brengt het apparaat naar een reparatiecentrum, maar het product is niet defect
(wanneer u deze gebruikershandleiding niet hebt gelezen).
• U wordt op de hoogte gesteld van deze administratiekosten voordat een dergelijke reparatie of bezoek wordt
uitgevoerd.
A B
[PD490-XN_ZF]BN68-03497E-02L04.indb 4 2011-03-07 오후 5:25:12Nederlands - 5
Overzicht van het bedieningspaneel
✎De vorm en kleur van het product kunnen afhankelijk van het model variëren.
Sensor voor de
afstandsbediening
Richt de afstandsbediening op dit punt van de tv.
Aan/uit-lampje Als de stroom is ingeschakeld, knippert het lampje even en gaat het
vervolgens uit. In de stand-bymodus blijft het aan.
SOURCEE Hiermee schakelt u tussen de beschikbare ingangsbronnen. Gebruik
deze toets in het schermmenu zoals u de toets ENTERE op de
afstandsbediening gebruikt.
MENU y Hiermee wordt het schermmenu met de functies van de tv weergegeven.
Hiermee regelt u het volume. Gebruik de y-toetsen in het
z schermmenu zoals u de toetsen ◄ en ► op de afstandsbediening gebruikt.
Hiermee wisselt u van kanaal. Gebruik de z-toetsen in het
schermmenu zoals u de toetsen ▼ en ▲ op de afstandsbediening gebruikt.
P (Aan/uit) Hiermee schakelt u de tv in en uit.
Stand-bymodus
Laat de tv niet gedurende langere tijd in de stand-bymodus staan (bijvoorbeeld wanneer u op vakantie bent).
Zelfs wanneer het apparaat via de aan/uit-knop is uitgeschakeld, wordt een kleine hoeveelheid stroom gebruikt.
U kunt het netsnoer het beste loskoppelen.
Installatieruimte
Bewaar de nodige afstand tussen het product en andere objecten (bijvoorbeeld muren) zodat er een goede
ventilatie mogelijk is.
Wanneer u dit niet doet, kunnen er door een stijging van de interne temperatuur brand of problemen bij het
product ontstaan.
✎Bij gebruik van een voet of wandbevestiging mogen er alleen onderdelen worden gebruikt die door
Samsung Electronics zijn geleverd.
x Het gebruik van onderdelen van een andere fabrikant kan leiden tot problemen met het product of zelfs
tot lichamelijk letsel doordat het product valt.
✎Het uiterlijk van het product kan afwijken van het afgebeelde apparaat.
✎Wees voorzichtig wanneer u de tv aanraakt. Sommige onderdelen kunnen heet zijn.
Plaatsing op een voet. Plaatsing met een wandbevestiging.
10 cm 10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Configuratiescherm
[PD490-XN_ZF]BN68-03497E-02L04.indb 5 2011-03-07 오후 5:25:12Nederlands - 6
Overzicht van de afstandsbediening
✎Dit is een speciale afstandsbediening voor visueel gehandicapten en heeft brailletekens op de kanaal- en
cijfertoetsen.
Batterijen plaatsen (batterijformaat: AAA)
Hiermee schakelt u de tv in en uit.
De beschikbare videobronnen weergeven
en selecteren.
Hiermee gaat u terug naar het vorige
kanaal.
Hiermee wordt het geluid tijdelijk
uitgeschakeld.
Hiermee worden kanalen gewijzigd.
Hiermee wordt de kanaallijst op het
scherm weergegeven.
De EPG (Electronic Programme Guide)
weergeven.
hiermee wordt informatie op het tvscherm weergegeven.
u/d/l/r: beweeg de cursor op het
scherm voor het menu-item.
ENTERE: selecteert het menu en kiest
de overeenkomstige itemwaarde.
hiermee kunt u het menu afsluiten.
Directe toegang tot kanalen.
Hiermee regelt u het volume.
Wisselen tussen Teletekst AAN, Dubbel,
Mix of UIT.
Hiermee wordt het schermmenu geopend.
snel veelgebruikte functies selecteren.
Geeft het beginscherm inhoud weer, met
Tv kijken, Mijn inhoud en Bron.
hiermee gaat u terug naar het vorige
menu.
Deze toetsen zijn voor het menu van
Kanaalbeheer, Mijn inhoud enzovoort.
Gebruik deze toetsen in de modi Mijn
inhoud en Anynet+.
P.MODE: druk op deze toets om de
Beeldmodus te selecteren.
W: hiermee stelt u de video met een
3D-signaal in.
DUALf-g: Geluidseffect selecteren.
E-MANUAL: de e-Manual weergeven.
P.SIZE: het Beeldformaat selecteren.
AD/SUBT.: hiermee wordt de
audiobeschrijving in- en uitgeschakeld (op
enkele locaties niet beschikbaar). / digitale
ondertiteling weergeven.
[PD490-XN_ZF]BN68-03497E-02L04.indb 6 2011-03-07 오후 5:25:13Nederlands - 7
De ingangsbron wijzigen
Bron
Hiermee kunt u de tv of een externe
ingangsbron selecteren, zoals een dvdspeler/Blu-rayspeler/kabelbox/STBsatellietontvanger.
1. Druk op de SOURCE toets op de
afstandsbediening.
2. Selecteer de gewenste externe
ingangsbron.
✎U kunt de kijkmodus wijzigen voor Alle
en Verbonden door op de toets l of r te
drukken.
■ TV / Ext. / PC / HDMI1/DVI / HDMI2 / HDMI3 /
AV / Component / USB
✎In de Bron worden aangesloten ingangen
gemarkeerd.
✎Ext. en PC blijven altijd geactiveerd.
✎Als de aangesloten externe apparaten niet zijn
gemarkeerd, druk dan op de rode toets. De tv
zoekt dan naar aangesloten apparaten.
Naam wijzigen
Druk in de Bron op de toets TOOLS. Hier kunt u een
naam voor externe-invoerbron instellen.
■ VCR / DVD / Kabel STB / Satelliet STB /
PVR STB / AV-ontvanger / Spelcomputer /
Camcorder / PC / DVI PC / DVI-apparaten /
TV / IPTV /Blu-ray / HD DVD / DMA: geef het
apparaat dat op de ingangen is aangesloten,
een naam om de selectie van de ingangsbron
gemakkelijker te maken.
✎Waneer u een pc met een HDMI-kabel aansluit
op de HDMI IN 1(DVI)-poort, moet u de tv
instellen op de modus PC onder Naam wijzigen.
(PS51D490)
✎Waneer u een pc met een HDMI-naar-DVI-kabel
aansluit op de HDMI IN 1(DVI)-poort, moet u de
tv instellen op de modus DVI PC onder Naam
wijzigen. (PS51D490)
✎Waneer u AV-apparaat met een HDMI-naar-DVIkabel aansluit op de HDMI IN 1(DVI)-poort, moet
u de tv instellen op de modus DVI-apparaten
onder Naam wijzigen. (PS43D490, PS51D490)
Informatie
Hiermee kunt u gedetailleerde informatie over het
geselecteerde externe apparaat weergeven.
Aansluiten op een antenne
Wanneer u de tv voor het eerst inschakelt, worden er automatisch enkele basisinstellingen uitgevoerd.
✎Vooraf doen: het netsnoer en de antenne aansluiten.
✎Het PDP-apparaat kan de ontvangst van amateur- en AM-zenders storen.
✎Het gebruik van een tweezijdig radiosysteem en draagbare unit of amateruradio of AM-radio in de buurt
van uw tv kan leiden tot een niet goed functionerende tv.
Kabel VHF/UHF-antenne
of
Netvoeding
[PD490-XN_ZF]BN68-03497E-02L04.indb 7 2011-03-07 오후 5:25:13Nederlands - 8
Plug & Play (eerste instelling)
Wanneer de tv voor het eerst wordt ingeschakeld, verschijnen er een enkele instructies op het scherm die u
helpen de basisinstellingen te configureren. Druk op de toets POWERP. Plug & Play is alleen beschikbaar als
de Bron is ingesteld op tv.
✎Zorg ervoor dat de antennekabel is aangesloten voordat u de tv inschakelt (p. 6).
✎Om terug te keren naar het vorige menu drukt u op de rode toets.
1
Een taal selecteren Druk op de toets ▲ of ▼ en druk vervolgens op de toets
ENTERE.
Selecteer de gewenste taal voor het schermmenu.
2
Selecteer
Winkeldemo of
Thuisgebruik.
Druk op de toets ◄ of ► en druk vervolgens op de toets
ENTERE.
Selecteer de modus Thuisgebruik. De modus Winkeldemo is
alleen bedoeld voor gebruik in winkels.
De instellingen van het apparaat van Winkeldemo terugzetten
op Thuisgebruik (standaard): druk op de volumeknop op de tv.
Wanneer het schermmenu voor het volume wordt weergegeven,
houdt u MENU 5 seconden ingedrukt.
Winkeldemo is alleen voor winkelweergave. Als u deze modus
selecteert, zijn verschillende functies niet beschikbaar. Selecteer
Thuisgebruik als u thuis kijkt.
3
Uw land selecteren Druk op de toets ▲ of ▼ en druk vervolgens op de toets ENTERE. Selecteer
uw land. (afhankelijk van het land)
✎Bij bepaalde modellen kunt u ervoor kiezen om een pincode in te stellen
nadat u in het menu Land uw land hebt geselecteerd.
✎Wanneer u een pincode invoert, is “0-0-0-0” niet beschikbaar.
4
De Klokmodus
instellen
Stel de Klokmodus automatisch of handmatig in.
Auto: Selecteer uw tijdzone.
Handm.: hier kunt u de datum en tijd handmatig instellen.
5
Een antenne
selecteren
Druk op de toets ▲ of ▼ en druk vervolgens op de toets ENTERE. Selecteer
antennebron om te onthouden.
6
Een kanaal
selecteren
Druk op de toets ▲ of ▼ en druk vervolgens op de toets ENTERE. Selecteer
de kanaalbron die moet worden opgeslagen. Wanneer u de antennebron als
Kabel instelt, kunt u numerieke waarden (kanaalfrequenties) voor de kanalen
opgeven. Zie voor meer informatie Kanaal → Automatisch afstemmen.
7
Veel kijkplezier. Druk op de toets ENTERE.
Als u deze functie wilt resetten...
Ook al hebt u dit al in de winkel gedaan, moet u nogmaals Plug & Play (MENU → Systeem) uitvoeren.
Selecteer Systeem – Plug & Play (eerste instelling). Voer uw viercijferige pincode in. De standaardpincode is ‘0-
0-0-0’ (behalve Frankrijk). Als u de pincode wilt wijzigen, gebruikt u de functie PIN wijzigen.
✎Als u de pincode bent vergeten, drukt u in de stand-bymodus achtereenvolgens op de volgende toetsen
van de afstandsbediening zodat de pincode opnieuw wordt ingesteld op ‘0-0-0-0’: MUTE → 8 → 2 → 4
→ POWER (aan).
P
POWER
[PD490-XN_ZF]BN68-03497E-02L04.indb 8 2011-03-07 오후 5:25:14Nederlands - 9
Aansluiten op een AV-apparaat
¦
Beschikbare apparaten: dvd-speler, Blu-rayspeler, HD-kabelbox, Satelliet STB (settopbox),
Videorecorder
Een HDMI- een HDMI-naar-DVI-kabel gebruiken (tot 1080p)
✎HDMI IN 1(DVI), 2, 3 / PC/DVI AUDIO IN
x Bij gebruik van de HDMI/DVI-kabelverbinding, moet u de HDMI IN 1(DVI)-aansluiting voor video
gebruiken. Voor een dvd-speler, Blu-rayspeler, HD-kabelbox of HD STB-satellietontvanger hebt u
mogelijk een DVI-HDMI-kabel(DVI-naar-HDMI) of DVI-HDMI-adapter (DVI-naar-HDMI) nodig. Voor
audio hebt u de PC/DVI AUDIO IN-aansluiting nodig.
x Mogelijk wordt het beeld niet normaal (of helemaal niet) weergegeven of werkt het geluid niet als een
extern apparaat dat met een oudere versie van HDMI werkt, op de televisie wordt aangesloten. Als
een dergelijk probleem zich voordoet, informeert u bij de fabrikant van het externe apparaat naar de
HDMI-versie die wordt ondersteund en vraagt u, als deze verouderd is, om een upgrade.
x Let op dat u een goedgekeurde HDMI-kabel aanschaft. Anders wordt het beeld mogelijk niet
weergegeven of treedt er een verbindingsfout op.
USB HDMI IN
HDMI OUT
DVI OUT
AUDIO OUT
R-AUDIO-L
W R
HDMI-verbinding
HDMI-naar-DVI-verbinding
[PD490-XN_ZF]BN68-03497E-02L04.indb 9 2011-03-07 오후 5:25:14Nederlands - 10
Een component gebruiken (maximaal 1080p) of een audio/video (uitsluitend 480i) en een scartkabel
gebruiken
✎In de modus Ext. ondersteunt DTV Out alleen MPEG SD-video en -audio.
✎Wanneer u verbinding maakt met AV IN, komt de kleur van de AV IN [Y/VIDEO]-aansluiting (groen) niet
overeen met die van de videokabel (geel).
✎Voor de beste beeldkwaliteit kunt u beter de componentaansluiting in plaats van de A/V-aansluiting
gebruiken.
AUDIO OUT
R-AUDIO-L
VIDEO OUT
AUDIO OUT
R-AUDIO-L
PR PB Y
COMPONENT OUT
EXT
Component-verbinding
AV-verbinding
SCART-verbinding
[PD490-XN_ZF]BN68-03497E-02L04.indb 10 2011-03-07 오후 5:25:15Nederlands - 11
Verbinding maken met een pc en audio-apparaat
¦ Beschikbare apparaten: digitaal audiosysteem, versterker, dvd-thuisbioscoop, PC
Een optische (digitale) aansluiting of een hoofdtelefoonaansluiting gebruiken
✎DIGITAL AUDIO OUT (OPTICAL)
x Wanneer een digitaal audiosysteem op de DIGITAL AUDIO OUT (OPTICAL)-aansluiting wordt
aangesloten, moet u het volume van zowel de tv als het audiosysteem reduceren.
x 5.1-kanaals audio is mogelijk wanneer de tv op een extern apparaat is aangesloten dat dit ondersteunt.
x Wanneer de ontvanger (thuisbioscoop) is ingesteld op Aan, hoort u alleen geluid via de optische
aansluiting van de tv. Wanneer de tv een DTV-signaal ontvangt, zendt de tv een 5.1-kanaalsgeluid
naar de ontvanger van de thuisbioscoop. Wanneer de bron een digitale component is, zoals een dvdspeler/blu-rayspeler/kabelbox/STB-satellietontvanger (settopbox) en via HDMI op de tv is aangesloten,
geeft de ontvanger van de thuisbioscoop alleen 2-kanaalsgeluid weer. Als u 5.1-kanaalsgeluid wilt
horen, sluit u de digitale uitgang van de dvd-speler/Blu-rayspeler/kabelbox/STB-satellietontvanger
(settopbox) rechtstreeks op een versterker of thuisbioscoop aan.
✎Hoofdtelefoon H: u kunt een hoofdtelefoon op de desbetreffende uitgang van uw set aansluiten.
Wanneer de hoofdtelefoon is aangesloten, worden de ingebouwde luidsprekers uitgeschakeld.
x Mogelijk kunt u de geluidsfunctie beperkt gebruiken wanneer er een hoofdtelefoon op de tv is
aangesloten.
x Het volume van de hoofdtelefoon en het volume van de tv worden apart geregeld.
OPTICAL
Verbinding dvd-thuisbioscoop
Hoofdtelefoonaansluiting
[PD490-XN_ZF]BN68-03497E-02L04.indb 11 2011-03-07 오후 5:25:16Nederlands - 12
¦ Een HDMI-kabel of een HDMI-naar-DVI-kabel of een D-subkabel gebruiken
✎Verbinding maken via de HDMI-kabel wordt mogelijk niet ondersteund, afhankelijk van de pc.
Weergavemodi (D-Sub en HDMI-naar-DVI-invoer)
• PS43D490: 1024 X 768 bij 60Hz
• PS51D490: 1360 X 768 bij 60Hz
Modus Resolutie
Horizontale
frequentie (kHz)
Verticale
frequentie (Hz)
Pixelklokfrequentie
(MHz)
Synchronisatie-
polariteit (H/V)
PS43D490 PS51D490
IBM
640 x 350
720 x 400
31,469
31,469
70,086
70,087
25,175
28,322
+/-
-/+
c
c
c
c
MAC
640 x 480
832 x 624
35,000
49,726
66,667
74,551
30,240
57,284
-/-
-/-
c
c
c
c
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1360 x 768
31,469
37,861
37,500
37,879
48,077
46,875
48,363
56,476
60,023
47,712
59,940
72,809
75,000
60,317
72,188
75,000
60,004
70,069
75,029
60,015
25,175
31,500
31,500
40,000
50,000
49,500
65,000
75,000
78,750
85,500
-/-
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+/+
+/+
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
✎OPMERKING
x Bij gebruik van de HDMI/DVI-kabelaansluiting moet u de HDMI IN 1(DVI)-aansluiting gebruiken.
x De interlace-modus wordt niet ondersteund.
x De tv werkt mogelijk niet normaal als een afwijkend videoformaat wordt geselecteerd.
x Afzonderlijke modus en compositemodus worden ondersteund. SOG (Sync On Green) wordt niet
ondersteund.
PC OUT AUDIO OUT AUDIO OUT DVI OUT HDMI OUT
pc-verbinding
[PD490-XN_ZF]BN68-03497E-02L04.indb 12 2011-03-07 오후 5:25:17Nederlands - 13
Aansluiten op een aansluiting voor ALGEMENE INTERFACE
De CI of CI+ CARD gebruiken
Voor betaalde kanalen moet een CI of CI+ CARD zijn geplaatst.
• Als u de ‘CI- of CI+-kaart’ niet plaatst, wordt bij sommige
kanalen het bericht “Scrambled Signal” (Gecodeerd signaal)
weergegeven.
• De koppelingsgegevens met een telefoonnummer, de ID van
de CI of CI+ CARD, de host-ID en andere informatie worden
na circa 2-3 minuten weergegeven. Neem contact op met uw
serviceprovider als er een foutbericht wordt weergegeven.
• Wanneer de kanaalgegevens zijn geconfigureerd, wordt
het bericht Update voltooid weergegeven. Hiermee wordt
aangegeven dat de kanaallijst is bijgewerkt.
✎OPMERKING
x U kunt een CI of CI+ CARD bij een lokale kabelaanbieder aanschaffen.
x Wanneer u de CI of CI+ CARD wilt verwijderen, doet u dat door de kaart er met uw handen voorzichtig
uit te trekken, want de kaart kan beschadigen als u deze laat vallen.
x Plaats de CI of CI+ CARD in de richting die op de kaart staat gemarkeerd.
x De plaats van de COMMON INTERFACE-aansluiting kan per model verschillen.
x CI of CI+ CARD wordt in sommige landen en regio’s niet ondersteund. Controleer dit bij uw
geautoriseerde verkoper.
x Neem contact op met uw serviceprovider als u problemen ondervindt.
x Plaats de CI of CI+ CARD die de huidige antenne-instellingen ondersteunt. Er wordt een vervormd beeld
of helemaal geen beeld weergegeven.
[PD490-XN_ZF]BN68-03497E-02L04.indb 13 2011-03-07 오후 5:25:17Nederlands - 14
De e-Manual weergeven
Schermweergave
Schakelen tussen de e-Manual en de bijbehorende menu’s.
✎Deze functie is niet beschikbaar sommige menu’s.
Methode 1 Methode 2
1. Druk op de rode toets om Probeer nu te
selecteren als u de bijbehorende menu’s wilt
uitvoeren.
2. Om terug te keren naar het vorige scherm van de
e-Manual drukt u op de toets E-MANUAL.
1. Druk op de toets ENTERE wanneer u het
inhoudsgebied hebt geselecteerd. “Wilt u dit
uitvoeren?” wordt weergegeven. Selecteer Ja
en druk vervolgens op de toets ENTERE. Het
schermvenster wordt weergegeven.
2. Om terug te keren naar het vorige scherm van de
e-Manual drukt u op de toets E-MANUAL.
E-MANUAL Hier kunt u de introductie en instructies over de functies van uw tv lezen.
O MENUm → Ondersteuning → e-Manual → ENTERE
✎Om terug te keren naar de E-handleiding drukt u op de toets E-MANUAL op uw
afstandsbediening.
✎U kunt de functie Probeer nu niet gebruiken als het menu niet is geactiveerd.
Basisfuncties
De vooraf ingestelde beeldmodus wijzigen
De beeldinstellingen aanpassen
De beeldgrootte wijzigen
De beeldopties wijzigen
De tv instellen met uw pc
} Index E Enter e Afsl.
Tv-scherm: geeft het beeld voor de
huidige invoerbron weer.
De categorie wijzigen. Druk op
de toets l of r om de gewenste
categorie te selecteren.
De lijst met submenu’s wordt
weergegeven. Druk op de toets
ENTERE om het gewenste
submenu weer te geven.
Bedieningstoetsen:
} Blauw (Index): het indexscherm weergeven.
E Enter: een categorie of submenu selecteren.
e Afsl.: de e-Manual sluiten.
Probeer nu
E-MANUAL
De vooraf ingestelde beeldmodus wijzigen
■
Selecteer het beeldtype dat uw voorkeur heeft.
Beeldmodus t
• Dynamisch: geschikt voor een heldere kamer.
• Standaard: geschikt voor een normale omgeving.
• Natural voor LED-tv / Ontspannen voor plasma-tv : geschikt om vermoeide
ogen tegen te gaan.
• Film: geschikt om fi lms in een donkere kamer te kijken.
• Amusement: geschikt voor fi lms en games.
N Alleen beschikbaar in de modus PC.
De vooraf ingestelde beeldmodus wijzigen
O MENUm → Beeld → Beeldmodus → ENTERE
■ Beeldmodus
Selecteer het beeldtype dat uw voorkeur heeft.
N Als een invoerbron is ingesteld op PC, zijn voor de Beeldmodus alleen
Standaard en Amusement beschikbaar.
• Dynamisch: geschikt voor een heldere kamer.
• Standaard: geschikt voor een normale omgeving.
• Film: geschikt om fi lms in een donkere kamer te kijken.
• Amusement: geschikt voor fi lms en games.
Basisfuncties > De vooraf ingestelde beeldmodus wijzigen (5/10)
a Probeer nu b Start { Zoom } Index L Pagina e Afsl.
Beeld
Beeldmodus : Standaard r
Helderheid : 10
Contrast : 100
Helderheid : 45
Scherpte : 50
Kleur : 50
Tint (G/R) : G50/R50
Schermaanpassing
[PD490-XN_ZF]BN68-03497E-02L04.indb 14 2011-03-07 오후 5:25:24Nederlands - 15
De inhoud weergeven
De zoomfunctie gebruiken
Wanneer u de e-Manual-instructies weergeeft,
selecteert u gele toets om in te zoomen op het scherm.
U kunt door het ingezoomde scherm schuiven met de
toetsen u en d.
✎Om terug te keren naar het vorige menu drukt u op
de toets RETURN.
Een trefwoord zoeken via de indexpagina
✎Deze functie wordt mogelijk niet in alle talen ondersteund.
2. Als u een trefwoord wilt zoeken, drukt u op de blauwe toets om het scherm Index te openen.
2. Druk op de toets l of r om een beginletter te selecteren en druk vervolgens op de toets ENTERE.
3. Druk op de toets u of d om een trefwoord te selecteren die uw wilt weergeven, en druk vervolgens op de
toets ENTERE.
4. U kunt het bijbehorende scherm met instructies voor de E-handleiding weergeven.
✎Als u het scherm Index wilt sluiten, drukt u op de toets RETURN.
a Probeer nu b Start { Zoom } Index L Pagina e Afsl.
Basisfuncties > De vooraf ingestelde beeldmodus wijzigen (5/10)
Inhoudsgebied: als u een submenu selecteert,
kunt u de bijbehorende inhoud weergeven.
Druk op de toets l of r om naar de vorige of
volgende pagina te gaan.
Bedieningstoetsen:
a Rood (Probeer nu): de bijbehorende menu's weergeven.
b Groen (Start): het startscherm van de e-Manual weergeven.
{ Geel (Zoom): een beeld vergroot weergeven.
} Blauw (Index): het indexscherm weergeven.
L (Pagina): de vorige of volgende pagina weergeven.
De vooraf ingestelde beeldmodus wijzigen
O MENUm → Beeld → Beeldmodus → ENTERE
■ Beeldmodus
Selecteer het beeldtype dat uw voorkeur heeft.
N Als een invoerbron is ingesteld op PC, zijn voor de Beeldmodus
alleen Standaard en Amusement beschikbaar.
• Dynamisch: geschikt voor een heldere kamer.
• Standaard: geschikt voor een normale omgeving.
• Film: geschikt om films in een donkere kamer te kijken.
• Amusement: geschikt voor films en games.
R Terug
De vooraf ingestelde beeldmodus wijzigen
O MENUm → Beeld → Beeldmodus → ENTERE
■ Beeldmodus
Selecteer het beeldtype dat uw voorkeur heeft.
N Als een invoerbron is ingesteld op PC, zijn voor de Beeldmodus alleen Standaard
en Amusement beschikbaar.
• Dynamisch: geschikt voor een heldere kamer.
• Standaard: geschikt voor een normale omgeving.
• Film: geschikt om films in een donkere kamer te kijken.
• Amusement: geschikt voor films en games.
[PD490-XN_ZF]BN68-03497E-02L04.indb 15 2011-03-07 오후 5:25:25Nederlands - 16
De wandbevestiging plaatsen
De wandbevestigingsset monteren
Met de wandbevestigingsset (apart verkrijgbaar) kunt u de tv aan de muur bevestigen.
Zie de instructies bij de onderdelen voor wandbevestiging als u wilt weten hoe u de wandbevestiging installeert.
Neem contact op met een technicus voor hulp alvorens de wandbeugel te bevestigen.
Samsung Electronics is niet verantwoordelijk voor schade aan het product of voor verwondingen die u zelf of
anderen oplopen wanneer u besluit de tv zelfstandig te installeren.
Specificaties voor de wandbevestigingsset (VESA)
✎De wandbevestigingsset is niet meegeleverd, maar wordt apart verkocht.
Monteer de wandbevestiging op een stevige wand die loodrecht op de vloer staat. Wanneer de steun aan
andere bouwmaterialen bevestigd moet worden, dient u contact op te nemen met de dichtstbijzijnde leverancier.
Als u de wandbevestiging aan het plafond of een schuine wand monteert, kan de tv vallen en daarmee tot zwaar
lichamelijk letsel leiden.
✎OPMERKING
x In de onderstaande tabel vindt u de standaardafmetingen voor wandbevestigingssets.
x Wanneer u onze wandbevestigingsset aanschaft, zijn een gedetailleerde installatiegids en alle vereiste
montageonderdelen daarbij inbegrepen.
x Gebruik geen schroeven die niet aan de standaard VESA-schroefspecificaties voldoen.
x Gebruik geen schroeven die langer zijn dan de standaardafmeting of die niet aan de standaard
VESA-schroefspecificaties voldoen. Schroeven die te lang zijn, kunnen de binnenkant van de televisie
beschadigen.
x Voor wandbevestigingen die niet voldoen aan de standaardspecificaties voor VESA-schroeven, kan de
lengte van de schroeven afwijken, afhankelijk van de specificaties voor wandbevestiging.
x Draai de schroeven niet te vast. Hierdoor kan het product beschadigd raken of vallen, wat kan leiden tot
lichamelijk letsel. Samsung is voor dit soort ongevallen niet aansprakelijk.
x Samsung is niet aansprakelijk voor productschade of lichamelijk letsel wanneer een niet-VESA of nietgespecificeerde wandbevestiging is gebruikt of wanneer de consument de installatie-instructies voor het
product niet in acht heeft genomen.
x Bevestig de televisie niet in een hoek van meer dan 15 graden.
Productgroep formaat in cm
VESA-spec.
(A * B)
Standaardschroef Aantal
Plasma-tv
43~51 400 X 400
M8 4
59~64 600 X 400
✎Draai de schroeven rond het gat los voordat u de muurbevestiging
op de wand installeert.
Monteer de wandbevestigingsset niet terwijl de tv is ingeschakeld. Dit kan resulteren in
lichamelijk letsel door elektrische schokken.
[PD490-XN_ZF]BN68-03497E-02L04.indb 16 2011-03-07 오후 5:25:25Nederlands - 17
Problemen oplossen
Wanneer u vragen over deze televisie hebt, kunt u eerst deze lijst raadplegen. Als geen van de tips in deze lijst
van toepassing zijn, gaat u naar ‘www.samsung.com’ en klikt u daar op Ondersteuning, of neemt u contact op
met een van de callcenters die u op de achterkant van deze handleiding vindt.
Probleem Oplossingen en uitleg
De tv kan niet worden ingeschakeld. • Controleer of het netsnoer stevig op het stopcontact en op de tv is aangesloten.
• Controleer of het stopcontact werkt.
• Druk op de POWER-toets op de tv om te controleren of het probleem niet bij de afstandsbediening
ligt. Als de tv wordt ingeschakeld, raadpleegt u ‘De afstandsbediening werkt niet’ hieronder.
Er is geen beeld/video. • Controleer de kabelverbindingen (haal alle kabels die op de tv en externe apparaten zijn aangesloten,
los en sluit ze vervolgens weer aan).
• Stel de video-uitgang van het externe apparaat (aftakdoos, satellietdoos, dvd, Blu-ray enzovoort)
in zodat deze overeenkomt met de aansluitingen van de tv-ingang. Als bijvoorbeeld de HDMIuitgang van een extern apparaat wordt gebruikt, moet deze op de HDMI-ingang van de tv worden
aangesloten.
• Controleer of de aangesloten apparaten zijn ingeschakeld.
• Selecteer de juiste bron voor de tv door op de toets SOURCE op de afstandsbediening te drukken.
De afstandsbediening werkt niet. • Vervang de batterijen van de afstandsbediening en plaats de batterijen met de polen (+/–) in de juiste
richting.
• Reinig het venster van de zender op de afstandsbediening.
• Richt vanaf circa 1,5 tot 2 meter afstand de afstandsbediening direct naar de televisie.
Met de afstandsbediening van de
kabelbox/settopbox kan de tv niet worden
in- of uitgeschakeld of kan het volume niet
worden geregeld.
• Programmeer de afstandsbediening voor de kabelbox/settopbox zodanig dat deze werkt voor de tv.
Raadpleeg de gebruikershandleiding van uw kabelbox/settopbox voor de code voor de SAMSUNGtv.
✎Enkele van de bovenstaande afbeeldingen en functies zijn alleen voor bepaalde modellen verkrijgbaar.
✎U kunt uw tv in optimale toestand houden door de nieuwste firmware op de website (samsung.com →
Ondersteuning → Downloads) via USB te installeren.
Licentie-informatie
Lijst met functies
Excellent Digital Interface & Networking: Met een ingebouwde digitale HD-tuner kunnen HD-uitzendingen zonder
abonnement worden bekeken zonder kabelbox/STB-satellietontvanger (settopbox).
3D
Met deze fantastische nieuwe functie kunt u 3D-inhoud bekijken.
Anynet+ (HDMI-CEC)
Hiermee kunt u alle aangesloten Samsung-apparaten die Anynet+ ondersteunen met de afstandsbediening van
de Samsung-tv bedienen.
Mijn downloads
Hiermee kunt u muziekbestanden en films bekijken die op een USB-apparaat zijn opgeslagen.
[PD490-XN_ZF]BN68-03497E-02L04.indb 17 2011-03-07 오후 5:25:26Nederlands - 18
De tv vastzetten aan de wand
Let op: als u duwt of trekt aan de tv of op de tv klimt, kan deze vallen. Zie er met name op
toe dat uw kinderen niet aan de tv gaan hangen of deze uit balans brengen. De tv kan dan
omvallen, wat verwondingen kan veroorzaken of zelfs fatale gevolgen kan hebben. Neem
alle voorzorgsmaatregelen die in de bijgesloten veiligheidsfolder worden genoemd. Om
veiligheidsredenen is het raadzaam de antivalvoorziening te installeren om de stabiliteit van het
toestel te verhogen.
Voorkomen dat de tv valt
1. Plaats de schroeven in de beugels en bevestig deze stevig aan de wand.
Controleer of de schroeven stevig in de wand zijn gedraaid.
✎Afhankelijk van het wandtype hebt u mogelijk aanvullend materiaal
nodig om het geheel te verankeren.
✎De benodigde beugels, schroeven en draad worden niet
meegeleverd. Deze moeten apart worden aangeschaft.
2. Verwijder de schroeven in het midden aan de achterkant van de tv, steek
de schroeven door de beugels en draai de schroeven weer vast in de tv.
✎Het is mogelijk dat de schroeven niet bij het product worden
meegeleverd. In dat geval moet u schroeven met de volgende
specificaties aanschaffen.
3. Verbind de beugels die aan de tv zijn bevestigd met een sterke draad
aan de beugels die aan de muur zijn bevestigd en knoop de draad stevig
vast.
✎OPMERKING
x Plaats de tv dicht bij de muur zodat deze niet achterover kan vallen.
x Het is veilig om de draad zodanig aan te brengen dat de beugels die aan de muur zijn bevestigd zich
boven de beugels op de tv of op gelijke hoogte daarmee bevinden.
x Haal de draad los voordat u de tv verplaatst.
4. Controleer of alle bevestigingen goed zijn aangebracht. Controleer de bevestigingspunten regelmatig op
tekenen van moeheid of verzwakking. Neem in geval van twijfel over de veiligheid van de bevestiging contact
op met een professionele installateur.
Opslag en onderhoud
✎Als u stickers op het tv-scherm hebt geplakt, kunnen er resten achterblijven als u de sticker weghaalt.
Reinig het tv-scherm voordat u tv gaat kijken.
Spuit geen water of reinigingsmiddel rechtstreeks
op het product. Vloeistoffen die in het product
terechtkomen kunnen een storing, brand of elektrische
schok veroorzaken.
Reinig het product met een zachte doek die licht met
water is bevochtigd.
Muur
[PD490-XN_ZF]BN68-03497E-02L04.indb 18 2011-03-07 오후 5:25:26Nederlands - 19
Specificaties
Omgevingsvereisten
Bedrijfstemperatuur
Gebruiksvochtigheid
Opslagtemperatuur
Opslagvochtigheid
10°C tot 40°C (50°F tot 104°F)
10% tot 80%, niet-condenserend
-20°C tot 45°C (-4°F tot 113°F)
5% tot 95%, niet-condenserend
Tv-systeem Analoog: B/G, D/K, L, I (afhankelijk van de landkeuze)
Digitaal: DVB-T/DVB-C
Kleuren-/videosysteem Analoog: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60
Digitaal: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0
Geluidssysteem BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC.
HDMI IN Video: 1080 24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: 2-kan. lineair PCM 32/44.1/48 kHz, 16/20/24 bits.
Draaivoet (links/rechts) -20˚ ~ 20˚
Modelnaam PS43D490 PS51D490
Schermformaat 43 inch (109 cm) 51 inch (128 cm)
Geluid
(Uitgang) 10 W x 2
Afmetingen (BxHxD)
Behuizing
Met voet
1011,8 X 56,0 X 622,4 mm
1011,8 X 305,0 X 698,7 mm
1187,8 X 56,0 X 706,6 mm
1187,8 X 305,0 X 782,9 mm
Gewicht
Zonder voet
Met voet
16,0 kg
20,3 kg
22,5 kg
26,8 kg
Beeldresolutie 1024 X 768 1360 X 768
✎Vormgeving en specificaties kunnen zonder kennisgeving worden gewijzigd.
✎Zie voor informatie over de stroomvoorziening en het energieverbruik het etiket op het product.
✎Hierbij verklaart Samsung dat het toestel PDP TV in overeenstemming is met de essentiële eisen en de
andere relevante bepalingen van richtlijn 1999/5/EG.
[PD490-XN_ZF]BN68-03497E-02L04.indb 19 2011-03-07 오후 5:25:27This page is intentionally
left blank.
[PD490-XN_ZF]BN68-03497E-02L04.indb 20 2011-03-07 오후 5:25:27
E-MANUAL
Imaginez les possibilités
Merci d'avoir acheté ce produit Samsung.
Afin de bénéficier d'un service plus complet,
veuillez enregistrer votre produit à l'adresse
www.samsung.com/register
Modèle ________ N° de série____________Contenu
Canal
• Utilisation du bouton INFO
(Guide Now & Next) 3
• Utilisation du menu Canal 4
• Utilisation des chaînes 14
• Mémorisation des chaînes 20
• Utilisation des chaînes (Satellite) 27
• Mémorisation de chaînes (Satellite) 32
• Autres fonctionnalités 46
Fonctions de base
• Changement du Mode Image prédéfini 48
• Réglage des paramètres de l’image 49
• Changement de la taille de l’image 50
• Modification des options d’image 54
• Configuration du téléviseur avec le PC 61
• Changement du mode Son prédéfini 65
• Réglage des paramètres sonores 66
Préférence
• Connexion à un réseau câblé 76
• Configuration du réseau 80
• Connexion à un réseau sans fil 87
• Réglage de l'heure 111
• Verrouillage des programmes 119
• Solutions économiques 122
• Incrustation d'image (PIP) 124
• Autres fonctionnalités 127
• Menu Assistance 138
Fonctions avancées
• Utilisation de la fonction 3D 146
• A propos d’AllShare™ 158
• Configuration de la fonction AllShare™ 160
• Configuration d’Anynet+ 164
• Anynet+ 166
• Basculement entre des appareils Anynet+ 171
• Ecoute via un récepteur 173
• Résolution des problèmes Anynet+ 175
• Utilisation de Mon contenu 178
• Connexion d’un périphérique USB 179
• Affichage 184
• Vidéos 185
• Musique 191
• Photos 194
• Mon contenu
- Fonctions supplémentaires 196
Informations supplémentaires
• Fonction télétexte 200
• Résolution des problèmes 205
• Fente INTERFACE
COMMUNE pour les connexions 216
• Verrou antivol Kensington 219
• Licence 221▶
Français
❑ Utilisation du bouton INFO (Guide Now & Next)
L’affichage identifie la chaîne en cours et l’état de certains paramètres audio et
vidéo.
Le Guide Now & Next affiche des informations quotidiennes sur les programmes
de télévision en fonction de l’heure de diffusion.
● Faites défiler à l’aide des boutons l, r pour afficher des informations sur le
programme de votre choix, tout en regardant la chaîne actuelle.
● Faites défiler à l’aide des boutons u, d pour afficher des informations sur
d’autres chaînes. Si vous souhaitez accéder à la chaîne sélectionnée, appuyez
sur le bouton ENTERE.
Canal
, Life On Venus Avenue
Non classé
Aucune information détaillée. a Information
18:11 Jeu 6 Jan
18:00 ~ 6:00
abc1
TV TNT
15◀ ▶
Français
❑ Utilisation du menu Canal
O MENUm → Assistance → Accueil contenu → ENTERE
Appuyez sur le bouton CONTENT pour sélectionner Regarder TV, puis
sélectionner le menu que vous souhaitez utiliser. Chaque écran s’affiche.
● L’image affichée peut varier en fonction du modèle.
Regarder TV
Guide
Gestionnaire prog.
Liste des chaînes
Gestion chaînes
Mon contenu Source◀ ▶
Français
■ Guide
Les informations du Guide électronique des programmes (EPG) sont fournies par
les diffuseurs.
Les programmes planifiés fournis par les diffuseurs vous permettent de planifier
les émissions que vous souhaitez regarder, de telle sorte que le téléviseur change
automatiquement de chaîne à l’heure indiquée. Des entrées de programmes
peuvent être vides ou ne pas être à jour en raison de l’état d’une chaîne.◀ ▶
Français
Utilisation de la fonction Channel View (Vue chaînes)
a Rouge (Gest. prog): Affiche le
Gestionnaire prog..
b Vert (-24 heures): Affiche la liste
des programmes qui seront diffusés
dans les 24 heures.
{ Jaune (+24 heures): Affiche la liste
des programmes qui seront diffusés
dans plus de 24 heures. ● L’image affichée peut varier en fonction du modèle.
a Gest. prog { +24 heures } Mode CH ; Information k Page E Regarder
TV TNT 05.1 Globo HD
TELA QUENTE (HD)
10:05 pm - 12:10 pm
10
DESVENTURAS EM SERIE (HD)
Auj.
Guide 16:02 Mar 19 Juil
Vue chaînes - Toutes les chaînes
Programmes resume at 06:00
Home and...
Aucune information.
QVC Selection
Aucune information.
04 Globo HD
05 DiscoveryH&L
06 TV GloboSD
07 price-drop.tv
08 QVC
09 R4DTT
Tine Team
Aucune information. Fiv... Dark Angel
American Chopper
16:00 16:30 17:00 17:30◀ ▶
Français
} Bleu (Mode CH): Permet de sélectionner le type des chaînes à afficher dans la
fenêtre Channel View.
; Information: Affiche des détails sur le programme sélectionné.
k Page: Permet de passer à la page suivante ou précédente.
ERegarder: Si vous sélectionnez le programme en cours, vous pouvez le regarder.
/ si vous sélectionnez le programme suivant, vous pouvez le réserver.◀ ▶
Français
■ Gestionnaire prog.
O CONTENT → Gestionnaire prog. → ENTERE
Vous pouvez voir, modifier ou supprimer une chaîne que vous avez réservée.
Utilisation de la fonction Rappel programme
Vous pouvez programmer l’affichage automatique d’une chaîne déterminée à l’heure
prévue. Avant d’utiliser cette fonction, vous devez régler l’heure.
1. Appuyez sur le bouton ENTERE pour sélectionner Gestionnaire prog..
2. Appuyez sur le bouton ENTERE pour ajouter un programme à planifier
manuellement. L’écran Rappel programme s’affiche.◀ ▶
Français
3. Appuyez sur les boutons l / r / u / d pour définir Antenne, Canal, Répétition,
Date ou Heure démarrage.
● Antenne: Sélectionnez la source d’antenne de votre choix.
● Canal: sélectionnez la chaîne de votre choix.
● Répétition: Sélectionnez Une fois, Manuel, Sam~Dim, Lun~Ven ou Quotid.
pour définir l’option suivant vos besoins. Si vous sélectionnez Manuel, vous
pouvez définir le jour de votre choix.
N Le symbole c indique que la date est sélectionnée.
● Date: permet de définir la date de votre choix.
N Cette option est disponible lorsque vous sélectionnez Une fois sous
Répétition.◀ ▶
Français
● Heure démarrage: Vous pouvez définir l’heure de début de votre choix.
N Appuyez sur le bouton INFO pour accéder aux Infos détaillées. L’écran Infos
détaillées vous offre la possibilité de modifier ou d’annuler des informations
réservées.
● Annuler progr.: Permet d’annuler une émission que vous avez réservée.
● Editer: Permet de modifier une émission que vous avez réservée.
● Retour: Permet de revenir à l’écran précédent.◀ ▶
Français
■ Liste des chaînes
Vous pouvez afficher toutes les chaînes
recherchées.
O Lorsque vous appuyez sur la touche CH
LIST de la télécommande, l’écran Liste
des chaînes s’affiche.
O Utilisation des boutons de fonctionnement
dans la Liste des chaînes.
● a Rouge (Antenne): Sélectionnez la source d’antenne de votre choix.
N l’option peut varier en fonction des modèles.
● { Jaune (Vue progr. / Vue chaînes): Affiche le programme lorsque la chaîne
numérique est sélectionnée. Revient à l’affichage des chaînes.
● L’image affichée peut varier en fonction du modèle.
Liste des chaînes
Tous
Hertzien a Antenne { Vue progr. L Mode CH E Regarder k Page
6 M6
9 W9
W9 MUSIC
11 NT1
800 24H TVE
801 arte
802 ATV
803 BBC
804 BBC
805 BBC◀ ▶
Français
● l r Mode CH / Canal: permet d’accéder au type de chaînes que vous
souhaitez afficher sur l’écran Liste des chaînes / Permet de changer de
chaîne.
N l’option peut varier en fonction du pays.
● ERegarder / Information: permet de regarder la chaîne sélectionnée /
affiche des détails sur le programme sélectionné.
● k Page: permet de passer à la page suivante ou précédente.◀ ▶
Français
Utilisation de la fonction de rappel de programme dans la liste des chaînes
(chaînes numériques uniquement)
Lorsque vous définissez l’option Rappel programme dans Liste des chaînes, vous
pouvez uniquement définir le programme sur Vue progr..
1. Appuyez sur le bouton CH LIST, puis sélectionnez la chaîne numérique de votre
choix.
2. Appuyez sur le bouton { (Vue progr.).
3. Appuyez sur les boutons u / d pour sélectionner le programme de votre choix,
puis appuyez sur ENTEREInformation.
4. Sélectionnez Rappel programme, et appuyez sur le bouton ENTERE lorsque
vous avez terminé.
N Pour annuler la fonction Rappel programme, suivez les étapes 1 à 3. Sélectionnez
Annuler progr..◀ ▶
Français
❑ Utilisation des chaînes
■ Gestion chaînes
O CONTENT → Gestion chaînes→
ENTERE
Modifiez la chaîne favorite et sélectionnez
ensuite Supprimer, Désélectionner tout ou
Sélectionner tout. Vous pouvez modifier le
nom de la chaîne uniquement pour les chaînes
analogiques.
● L’image affi chée peut varier en fonction du modèle.
Gestion chaînes Tous
Elément sélectionné: 0 Numéro chaîne
Page 2/3
Hertzien a Antenne } Trier par k Page E Sélectionner T Outils R Retour◀ ▶
Français
● ( ) Chaînes: Sélectionnez une chaîne dans Tous, TV, Radio, Donn/autre, et
Analogique.. Modifiez les paramètres de l’antenne ou des chaînes à l’aide des
menus situés dans le coin supérieur droit de l’écran.
● ( ) Favoris 1 sur 5: Affiche toutes les chaînes favorites..
N Utilisation des boutons de couleur avec la fonction Gestion chaînes.
● a Rouge (Antenne): Sélectionnez la source d’antenne de votre choix.
● } Bleu (Trier par): permet de changer l’ordre des chaînes classées par nom
ou par numéro.◀ ▶
Français
Icônes d’affichage de l’état des chaînes
Icône Opérations
a Chaîne analogique.
c Chaîne sélectionnée.
F Chaîne définie comme favorite.
Menu d’options Gestion chaînes t
Réglez chaque chaîne à l’aide des options du menu Gestion chaînes (Regarder,
Ajouter aux favoris / Modif. favoris, Verr / Déverr, Modif. nom de chaîne, Modif.
num. chaîne, Supprimer, Sélectionner tout / Désélectionner tout). Les options du
menu peuvent varier en fonction de l’état de la chaîne.◀ ▶
Français
1. Sélectionnez une chaîne et appuyez ensuite sur le bouton TOOLS.
2. Sélectionnez une fonction et modifiez ses réglages.
● Regarder: permet de regarder la chaîne sélectionnée.
● Ajouter aux favoris / Modif. favoris: permet de définir comme favorites les
chaînes que vous regardez souvent / Permet d’ajouter ou de retirer les chaînes
sélectionnées de Favoris 1 sur 5.
1. Sélectionnez Ajouter aux favoris / Modif. favoris, puis appuyez sur le bouton
ENTERE.
N Si la chaîne a déjà été ajoutée comme favorite, l’option Modif. favoris
s’affiche.◀ ▶
Français
2. Appuyez sur le bouton ENTERE pour sélectionner Favoris 1 sur 5 et
appuyez ensuite sur OK.
N Vous pouvez affecter une chaîne Favoris qui sera incluse dans la liste
Favoris 1 sur 5.
● Verr / Déverr: vous pouvez verrouiller une chaîne afin qu’elle ne puisse pas être
sélectionnée ni visualisée.
N Cette fonction n’est disponible que si l’option Verr. chaîne est définie sur
Activé.◀ ▶
Français
● Modifi. nom de chaîne (chaînes analogiques uniquement): vous permet d’attribuer
votre propre nom à la chaîne.
N Cette fonction n’est pas prise en charge dans toutes les régions.
● Modif. num. chaîne: vous pouvez modifier le numéro en appuyant sur les touches
numériques souhaitées.
N Cette fonction n’est pas prise en charge dans toutes les régions.
● Supprimer: vous pouvez supprimer une chaîne afin d’afficher celles de votre
choix.
● Sélectionner tout: permet de sélectionner toutes les chaînes de la liste des
chaînes.◀ ▶
Français
❑ Mémorisation des chaînes
N MENUm → Canal → ENTERE
■
N
Antenne
l’option peut varier en fonction du pays. t
Avant que votre téléviseur ne puisse commencer à mémoriser les chaînes
disponibles, vous devez spécifier le type de la source du signal reliée au téléviseur.◀ ▶
Français
■ Recherche automatique
N Il est possible que les numéros de programme attribués automatiquement ne
correspondent pas aux numéros de programme souhaités ou réels. Si une
chaîne est verrouillée par la fonction Verr. chaîne, la fenêtre de saisie du code
PIN s’affiche.◀ ▶
Français
● Antennes: sélectionnez la source d’antenne à mémoriser. l’option peut varier
en fonction du pays.
● Numér. et Anal. / Numérique / Analogique: permet de sélectionner la source
des chaînes à mémoriser. Lors de la sélection de Câble → Numér. et Anal. ou
Numérique: fournit une valeur à rechercher pour les chaînes câblées.
● Mode de rech. (Complet / Réseau / Rapide): recherche toutes les chaînes
avec des stations de diffusion actives et les enregistre dans la mémoire du
téléviseur.
N Si vous sélectionnez Rapide, vous pouvez définir Réseau, ID réseau,
Fréquence, Modulation et Taux de symbole manuellement en appuyant sur
le bouton de la télécommande.
● Réseau (Auto. / Manuel): sélectionnez le mode de réglage ID réseau Auto. ou
Manuel.◀ ▶
Français
● ID réseau: si Réseau est défini sur Manuel, vous pouvez configurer un ID
réseau à l’aide des boutons numériques.
● Fréquence: affiche la fréquence correspondant à la chaîne (varie d’un pays à
l’autre).
● Modulation: affiche les valeurs de modulation disponibles.
● Taux de symbole: affiche les taux de symboles disponibles.
■ Option de rech. de câble
(en fonction du pays)
Définit des options de recherche supplémentaires telles que la fréquence et le
débit de symboles pour une recherche sur réseau câblé.◀ ▶
Français
■ Recherche manuelle
Recherche manuellement une chaîne et la mémorise dans le téléviseur.
N Si une chaîne est verrouillée par la fonction Verr. chaîne, la fenêtre de saisie du
code PIN s’affiche.
● Réglage des chaînes numériques: recherche une chaîne numérique.
1. Appuyez sur le bouton a pour sélectionner Nouveau.
N Lorsque vous sélectionnez Antenne → Hertzien: Canal, Fréquence,
Bande passante
N Lorsque vous sélectionnez Antenne → Câble: Fréquence, Modulation,
Taux de symbole◀ ▶
Français
2. Appuyez sur le bouton d pour sélectionner Rech.. Au terme de la
recherche, les chaînes de la liste sont mises à jour.
● Réglage des chaînes analogiques: recherche une chaîne analogique.
1. Appuyez sur le bouton a pour sélectionner Nouveau.
2. Définissez les options Programme, Système de Couleur, Système
Sonore, Canal et Rech..
3. Appuyez sur le bouton d pour sélectionner Mémoriser. Au terme de la
recherche, les chaînes de la liste sont mises à jour.◀ ▶
Français
N Mode Canal
● P (Mode Programme): à la fin du réglage, des numéros de position compris
entre P0 et P99 sont attribués aux stations de radiodiffusion de votre région.
Dans ce mode, vous pouvez sélectionner une chaîne en saisissant son
numéro de position.
● C (Mode canal Hertzien) / S (Mode canal Câble): ces deux modes vous
permettent de sélectionner une chaîne en entrant le numéro attribué à
chaque chaîne câblée ou station de radiodiffusion hertzienne.◀ ▶
Français
❑ Utilisation des chaînes (Satellite)
pour PDP 570
■ Gestion chaînes
O CONTENT → Gestion chaînes→
ENTERE
Ajoutez ou modifiez les chaînes favorites
et définissez les chaînes sur Supprimer,
Désélectionner tout ou Sélectionner tout.
Vous pouvez modifier le nom de la chaîne
uniquement pour les chaînes analogiques.
● L’image affi chée peut varier en fonction du modèle.
Gestion chaînes Tous
Elément sélectionné: 0 Numéro chaîne
Page 2/3
Hertzien a Antenne } Trier par k Page E Sélectionner T Outils R Retour◀ ▶
Français
● ( ) Chaînes: Sélectionnez une chaîne dans Tous, TV, Radio, Donn/autre et
Analogique. Modifiez les paramètres de l’antenne ou des chaînes à l’aide des
menus situés dans le coin supérieur droit de l’écran.
● ( ) Favoris 1 sur 5: Affiche les chaînes favorites .
N Utilisation des boutons de couleur avec la fonction Gestion chaînes.
● a Rouge (Antenne): Sélectionnez la source d’antenne de votre choix.
● } Bleu (Trier par): Permet de changer l’ordre des chaînes classées par
numéro ou par nom.◀ ▶
Français
Icônes d’affichage de l’état des chaînes
Icône Opérations
a Chaîne analogique.
c Chaîne sélectionnée.
F Chaîne définie comme favorite.
Menu d’options Gestion chaînes t
Réglez chaque chaîne à l’aide des options du menu Gestion chaînes (Regarder,
Ajouter aux favoris / Modif. favoris, Verr / Déverr, Modif. nom de chaîne, Modif.
num. chaîne, Supprimer, Sélectionner tout / Désélectionner tout). Les options du
menu peuvent varier en fonction de l’état de la chaîne.◀ ▶
Français
1. Sélectionnez une chaîne et appuyez ensuite sur le bouton TOOLS.
2. Sélectionnez une fonction et modifiez ses réglages.
● Regarder: permet de regarder la chaîne sélectionnée.
● Ajouter aux favoris / Modif. favoris: permet de définir comme favorites les
chaînes que vous regardez souvent.
1. Sélectionnez Ajouter aux favoris / Modif. favoris, puis appuyez sur le bouton
ENTERE.
N Si la chaîne a déjà été ajoutée comme favorite, l’option Modif. favoris
s’affiche.◀ ▶
Français
2. Appuyez sur le bouton ENTERE pour sélectionner Favoris 1 sur 5, puis
appuyez sur le bouton OK.
N Vous pouvez affecter une chaîne favorite dans Favoris entre Favoris 1 sur 5.
● Supprimer: vous pouvez supprimer une chaîne afin d’afficher celles de votre
choix.
● Sélectionner tout: permet de sélectionner toutes les chaînes de la liste des
chaînes.◀ ▶
Français
❑ Mémorisation de chaînes (Satellite)
N MENUm → Canal → ENTERE
■ Antennet
N l’option peut varier en fonction du pays.
Avant que votre téléviseur ne puisse commencer à mémoriser les chaînes
disponibles, vous devez spécifier le type de la source du signal reliée au téléviseur.◀ ▶
Français
■ Recherche automatique
● Recherche automatique
Recherche automatiquement une chaîne et la mémorise dans le téléviseur.
N Il est possible que les numéros de programme attribués automatiquement ne
correspondent pas aux numéros de programme souhaités ou réels. Si une
chaîne est verrouillée par la fonction Verr. chaîne, la fenêtre de saisie du code
PIN s’affiche.
● Antennes: sélectionnez la source d’antenne à mémoriser. l’option peut varier
en fonction du pays.◀ ▶
Français
● Numér. et Anal. / Numérique / Analogique: permet de sélectionner la source
des chaînes à mémoriser. Lors de la sélection de Câble → Numér. et Anal. ou
Numérique : fournit une valeur à rechercher pour les chaînes câblées.
● Mode de rech. (Complet / Réseau / Rapide): recherche toutes les chaînes
avec des stations de diffusion actives et les enregistre dans la mémoire du
téléviseur.
N Si vous sélectionnez Rapide, vous pouvez définir Réseau, ID réseau,
Fréquence, Modulation et Taux de symbole manuellement en appuyant
sur le bouton de la télécommande.
● Réseau (Auto / Manuel): sélectionne le mode de réglage ID réseau Auto. ou
Manuel.
● ID réseau: si Réseau est défini sur Manuel, vous pouvez configurer un ID
réseau à l’aide des boutons numériques.◀ ▶
Français
● Fréquence: affiche la fréquence correspondant à la chaîne (varie d’un pays à
l’autre).
● Modulation: affiche les valeurs de modulation disponibles.
● Taux de symbole: affiche les taux de symboles disponibles.
■ Option de rech. de câble
(En fonction du pays)
Définit des options de recherche supplémentaires, telles que la fréquence et le
taux de symbole pour une recherche sur un réseau câblé.◀ ▶
Français
– Fréq. de départ / Fréquence de fin.: définit la fréquence de début ou de fin
(varie d’un pays à l’autre).
– Taux de symbole: affiche les taux de symboles disponibles.
– Modulation: affiche les valeurs de modulation disponibles.
● Mémorisation auto veille (Arrêt / Marche) pour l’Italie
: Permet ou rend infirme
l’auto-air pendant que la TV est dans le mode de secours.
● Réveil (1 hour later / 2 hours later / 00:00 / 02:00 / 12:00 / 14:00) pour l’Italie:
Sélectionne le programmateur pour la mise sous tension du téléviseur et le
balayage automatique des chaînes.◀ ▶
Français
■ Recherche manuelle
Recherche manuellement une chaîne et la mémorise dans le téléviseur.
N Si une chaîne est verrouillée par la fonction Verr. chaîne, la fenêtre de saisie du
code PIN s’affiche.
● Transpondeur: permet de sélectionner le transpondeur à l’aide des boutons
haut/bas.
● Mode Recherche: permet de mémoriser soit les chaînes gratuites, soit toutes
les chaînes.
● Rech. réseau (Désactiver / Activer): recherche d’un réseau à l’aide des
boutons haut/bas.◀ ▶
Français
● Qualité du signal: permet d’afficher l’état actuel du signal de diffusion.
N Les informations concernant un satellite et son transpondeur sont sujettes à
des modifications selon les conditions de diffusion.
N Une fois le paramétrage terminé, allez sur Rechercher et appuyez sur le
bouton ENTERE. La recherche des chaînes commence.◀ ▶
Français
■ Système satellite
L’écran de saisie du code PIN apparaît. Entrez votre code PIN à quatre chiffres. La
fonction système satellite est disponible lorsque l’option Antenne est définie sur
Satellite. Avant d’exécuter la fonction Mémorisation Auto, définissez système
satellite. La recherche des chaînes est alors exécutée normalement.
● Sélection du satellite: vous pouvez choisir les satellites pour ce téléviseur.
● Alimentation du LNB (Arrêt / Activé) : permet d’activer ou de désactiver
l’alimentation du LNB.◀ ▶
Français
● Réglages LNB: configure l’équipement extérieur.
– Transpondeur: permet de sélectionner le transpondeur à l’aide des boutons
haut / bas.
– Mode DiSEqC: permet de sélectionner le mode DiSEqC pour le LNB
sélectionné.
– Osc. LNB plus bas: permet de régler les oscillateurs LNB sur une
fréquence inférieure.
– Osc. LNB plus hauts: permet de régler les oscillateurs LNB sur une
fréquence supérieure.
– Tone 22 kHz (Arrêt / Activé / Auto.): permet de sélectionner la tonalité
22 KHz en fonction du type de LNB. Dans le cas d’un LNB universel, elle
doit être définie sur Auto.
– Qualité du signal: permet d’afficher l’état actuel du signal de diffusion.◀ ▶
Français
● Param. SatCR/Unicable: Configurez l’installation à câble unique.
N Cette fonction n’est pas prise en charge dans toutes les régions.
– SatCR/Unicable: Activez ou désactivez la prise en charge de l’installation à
câble unique.
– Numéro de logement: Sélectionnez le numéro de logement de l’utilisateur
SatCR pour ce récepteur.
– Fréquence du logement: Entrez la fréquence appropriée pour recevoir le
signal de SatCR.
– Détec. fréq. logement: Détectez automatiquement la fréquence du signal
pour le numéro de logement sélectionné.
– Vérif. fréq. logement: Vérifiez que la fréquence indiquée correspond au
logement sélectionné.◀ ▶
Français
● Réglages du positionneur: Configure le positionneur de l’antenne.
Positionneur (Activé / Arrêt): Permet d’activer ou de désactiver le contrôle du
positionneur.
Type de posit. (USALS / DiSEqC 1.2): Permet de définir le type de
positionneur entre DiSEqC 1.2 et USALS (Universal Satellite Automatic Location
System).
– Longitude: Définit la longitude de mon emplacement.
– Latitude: Définit la latitude de mon emplacement.
– Réglages longitude satellite: Règle la longitude des satellites définis par
l’utilisateur.◀ ▶
Français
Mode Utilisateur: Permet de définir la position de l’antenne satellite en fonction
de chaque satellite. Si vous mémorisez la position actuelle de l’antenne satellite
en fonction d’un satellite donné, lorsque le signal de ce satellite est requis,
l’antenne satellite peut se placer dans la position prédéfinie.
– Satellite: Permet de sélectionner le satellite pour lequel la position doit être
définie.
– Transpondeur: Permet de sélectionner un transpondeur dans la liste pour
la réception du signal.
– Mode Déplacement: Permet de choisir entre le mode de déplacement
individuel ou continu.
– Taille des pas: Permet de régler les degrés de la taille des pas pour la
rotation de l’antenne. L’option Taille des pas est disponible lorsque Mode
Déplacement est défini sur Pas.◀ ▶
Français
– Aller à une pos. enregistrée: Permet de faire pivoter l’antenne jusqu’à la
position de satellite enregistrée.
– Position de l’antenne: Permet d’ajuster et de mémoriser la position de
l’antenne pour le satellite sélectionné.
– Mémoriser la position actuelle: Permet de mémoriser la position actuelle
comme limite de positionneur sélectionnée.
– Qualité du signal: Permet d’afficher l’état actuel du signal de diffusion.◀ ▶
Français
Mode Installateur: Permet de fixer des limites à l’étendue des mouvements
de l’antenne satellite ou de réinitialiser la position. En règle générale, le guide
d’installation utilise cette fonction.
– Position limite (Est / Ouest): Permet de sélectionner la direction de la limite
du positionneur.
– Position de l’antenne: Permet d’ajuster et d’enregistrer la position de
l’antenne pour le satellite sélectionné.
– Mémoriser la position actuelle: Permet de mémoriser la position actuelle
comme Limite du positionneur sélectionnée.
– Réinitialiser la position: Déplace l’antenne jusqu’à la position de référence.
– Redéfinir limite positionneur: Autorise l’antenne à effectuer un arc
complet.
● Réinit. tous les paramètres (OK / Annuler): Toutes les valeurs initiales des
paramètres du satellite seront réinitialisées.◀ ▶
Français
❑ Autres fonctionnalités
O MENUm → Canal → ENTERE
■ Réglage fin
(Chaînes analogiques uniquement)
Si la réception est nette, vous n’avez pas besoin d’effectuer un réglage fin du
canal, car cette opération s’effectue automatiquement pendant la recherche
et la mémorisation. Si le signal est faible ou déformé, vous pouvez effectuer
manuellement un réglage fin du canal. Faites défiler vers la gauche ou vers la droite
jusqu’à ce que l’image soit nette.◀ ▶
Français
N Les paramètres s’appliquent à la chaîne regardée actuellement.
N Les chaînes réglées et mémorisées sont repérées par un astérisque (*) placé à
droite de leur numéro dans la bannière des chaînes.
N Pour réinitialiser le réglage précis, sélectionnez Réinit..
■ Transfert de liste des chaînes
L’écran de saisie du code PIN apparaît. Entrez votre code PIN à quatre chiffres.
Importe ou exporte la carte des chaînes. Vous devez connecter un périphérique de
stockage USB pour utiliser cette fonction.
● Importer depuis le périphérique USB: Permet d’importer une liste de chaînes
depuis un périphérique USB.
● Exporter vers le périphérique USB: Permet d’exporter la liste des chaînes
vers le périphérique USB. Cette fonction est disponible lorsqu’un périphérique
USB est connecté.◀ ▶
Français
❑ Changement du Mode Image prédéfini
O MENUm → Image → Mode Image → ENTERE
■ Mode Image
Sélectionnez le type d’image que vous préférez.
N Lorsqu’une source d’entrée est définie sur PC, seules les options Standard et
Loisirs sont disponibles pour le Mode Image.
● Dynamique: adapté à un environnement lumineux.
● Standard: adapté à un environnement normal.
● Cinéma: adapté au visionnage de films dans une pièce sombre.
● Loisirs: adapté au visionnage de films et de jeux vidéo.
N cette option n’est disponible que si vous connectez un PC.
Fonctions de base◀ ▶
Français
❑ Réglage des paramètres de l’image
O MENUm → Image → ENTERE
■ Lum. Cellules / Contraste / Luminosité / Netteté / Couleur / Teinte (V/R)
Votre téléviseur dispose de plusieurs options de réglage pour le contrôle de la
qualité d’image.
N Lorsque vous modifiez les paramètres Lum. Cellules, Contraste, Luminosité,
Netteté, Couleur ou Teinte (V/R) l’affichage écran change en conséquence.
N En mode PC, vous pouvez uniquement apporter des modifications aux options
Lum. Cellules, Contraste, Luminosité et Netteté.
N Les paramètres peuvent être définis et mémorisés pour chaque appareil
externe connecté au téléviseur.
N La réduction de la luminosité de l’image se traduit par une consommation
d’énergie moindre.◀ ▶
Français
❑ Changement de la taille de l’image
O MENUm → Image → Réglage de l’écran → ENTERE
■ Réglage de l’écran
● Format de l’image: il se peut que votre décodeur câble / récepteur satellite
dispose de son propre jeu de formats d’écran. Il est toutefois vivement conseillé
d’utiliser le mode 16:9.
16:9 Auto: règle automatiquement la taille de l’image sur le format 16:9.
16:9: règle l’image en mode large, c’est-à-dire en 16:9.
Zoom large: Affiche les images au format 4/3 au 16/9 en rognant haut et bas
d’image.
N Règle la Position à l’aide des boutons u, d.◀ ▶
Français
Zoom: Etire l’image au format 16:9 verticalement.
N Règle la Zoom et Position à l’aide des boutons u et d.
4:3: Met l’image au format 4:3.
N Ne regardez pas un film au format 4:3 pendant une période prolongée. Les
traces de bordures situées sur la gauche, sur la droite et au centre de l’écran
peuvent donner lieu au phénomène de rémanence (brûlure d’écran) non
couvert par la garantie.
Adapter à l’écran: Affiche l’intégralité de l’image sans coupure lors de l’entrée
de signaux HDMI (720p / 1080i / 1080p) ou Composant (1080i / 1080p).◀ ▶
Français
N Remarque
● Les options de format de l’image peuvent varier en fonction de la source
d’entrée.
● Les options disponibles peuvent varier en fonction du mode sélectionné.
● En mode PC, seuls les modes 16:9 et 4:3 peuvent être réglés.
● Les paramètres peuvent être définis et mémorisés pour chaque appareil
externe connecté à une entrée du téléviseur.
● Si vous utilisez la fonction Adapter à écran avec l’entrée HDMI 720p, une
ligne sera coupée en haut, en bas, à gauche et à droite, comme c’est le cas
avec la fonction Overscan.◀ ▶
Français
● 4:3 Taille écran (16:9 / Zoom large / Zoom / 4:3): disponible uniquement
lorsque le format de l’image est défini sur 16:9 Auto. Vous pouvez déterminer
le format d’image souhaité sur 4:3 WSS (Wide Screen Service) ou sur la taille
d’origine. Chaque pays européen impose une taille d’image différente.
N Non disponible en mode PC, Composant et HDMI.◀ ▶
Français
❑ Modification des options d’image
■ Paramètres avancés
O MENUm → Image → Paramètres avancés → ENTERE
(L’option Paramètres avancés est disponible dans le mode Standard / Cinéma)
Comparés aux modèles précédents, les nouveaux téléviseurs Samsung offrent une
image plus précise.
N En mode PC, vous ne pouvez modifier que les options Gamma et Balance
blancs.◀ ▶
Français
● Nuance de noir (Arrêt / Sombre / Plus
sombre / Le plus sombre): sélectionnez le
niveau de noir afin de régler la profondeur
d’écran.
● Contraste Dyn. (Arrêt / Bas / Moyen /
Elevé): permet de régler le contraste de
l’écran.
● Gamma: permet de régler l’intensité des
couleurs primaires.
● L’image affichée peut varier en fonction du
modèle.
Paramètres avancés
Nuance de noir : Arret r
Contraste Dyn. : Moyen
Gamma : 0
RVB uniquement : Arret
Espace de couleur : Natif
Balance blancs
Carnation : 0
d
U Déplacer EEntrer R Retour◀ ▶
Français
● RVB uniquement (Arrêt / Rouge / Vert / Bleu): Affiche les couleurs Rouge,
Vert et Bleu afin de permettre un réglage précis de la teinte et de la saturation.
● Espace de couleur (Auto. / Natif): permet de régler la gamme des couleurs
disponibles pour créer l’image.
● Balance blancs: permet de régler la température des couleurs pour que l’image
soit plus naturelle.
Aj. Rouge / Aj. Vert / Aj. Bleu: permet de régler la profondeur de chaque
couleur (rouge, vert, bleu).
Régl. Rouge / Régl. vert / Régl. bleu: permet de régler la luminosité de
chaque couleur (rouge, vert, bleu).
Réin.: rétablit les paramètres de balance des blancs par défaut.◀ ▶
Français
● Carnation: Accentue la rougeur de la carnation.
● Netteté des contours (Arrêt / Activé): fait ressortir les contours des objets.
● Lumin./Mouvement (Arrêt / Activé): permet de réduire la consommation
d’électricité en contrôlant la luminosité.
N Lorsque vous modifiez une valeur de Contraste, Lumin./Mouvement est
défini sur Arrêt.◀ ▶
Français
■ Options d’image
O MENUm → Image → Options d’image → ENTERE
N En mode PC, vous pouvez uniquement
apporter des modifications aux options
Nuance Coul.
● Nuance Coul. (Froide / Standard /
Chaude1 / Chaude2)
N Les options Chaude1 ou Chaude2 ne
sont activées que si le mode d’image est
Dynamique.
N Les paramètres peuvent être définis et
mémorisés pour chaque appareil externe connecté à une entrée du
téléviseur.
● L’image affichée peut varier en fonction du
modèle.
Options d’image
Nuance Coul. : Standard r
Filtre Bruit num. : Auto.
Filtre Bruit MPEG : Auto.
Niv. noir HDMI : Normal
Mode Film : Arrêt
U Déplacer EEntrer R Retour◀ ▶
Français
● Filtre Bruit num. (Arrêt / Bas / Moyen / Elevé / Auto. / Visualisation auto):
si le signal de radiodiffusion reçu par votre téléviseur est faible, vous pouvez
activer la fonction Filtre Bruit num. pour faciliter la réduction d’images
fantômes ou statiques qui peuvent apparaître à l’écran.
N Lorsque le signal est faible, sélectionnez une autre option jusqu’à obtention
de la meilleure image possible.
● Visualisation auto: Lors du changement des chaînes analogiques, il affiche
l’intensité du signal.
N Disponible uniquement pour les chaînes analogiques.
N Lorsque la barre est verte, vous recevez le meilleur signal possible.
● Filtre Bruit MPEG (Arrêt / Bas / Moyen / Elevé / Auto.): Réduit le bruit MPEG
pour améliorer la qualité de l’image.◀ ▶
Français
● Niv. noir HDMI (Bas / Normal): permet de choisir le niveau de noir pour régler
la profondeur de l’écran.
N Disponible en mode HDMI (RVB) uniquement.
● Mode Film (Arrêt / Auto.1 / Auto.2 / Cinema Smooth pour les PDP 550
): règle
le téléviseur de sorte qu’il détecte et traite automatiquement les signaux de
cinéma en provenance de toutes les sources et adapte l’image afin d’obtenir
une qualité optimale. La fonction Cinema Smooth n’est activée que lorsqu’un
signal HDMI 24 Hz est en entrée.
N Disponible en modes TV, AV, COMPOSANT (480i / 1080i) et HDMI (1080i).
■ Réinit. param. img (OK / Annuler)
Rétablit les paramètres par défaut du mode d’image actuel.◀ ▶
Français
❑ Configuration du téléviseur avec le PC
Réglez le mode d’entrée sur PC.
■ Réglage Automatique
O MENUm → Image → Réglage Automatique → ENTERE
Cette option permet de régler les positions / valeurs de fréquence et d’affiner
automatiquement les paramètres.
N Non disponible en cas de connexion à l’aide d’un câble HDMI vers DVI.◀ ▶
Français
■ Réglage écran PC
O MENUm → Image → Réglage de l’écran → Réglage écran PC →
ENTERE
● Régl. Base / Regl. Préc: élimine ou réduit les parasites visuels. Si vous ne
pouvez pas éliminer ces parasites au moyen d’un réglage précis uniquement,
réglez la fréquence (Régl. Base) au mieux, puis effectuez de nouveau un
réglage précis. Une fois les parasites réduits, effectuez un nouveau réglage de
l’image pour l’aligner au centre de l’écran.
● Position: réglez la position de l’écran du PC à l’aide des touches de direction (u
/ d / l / r).
● Réinitialiser Image: rétablit les paramètres d’image par défaut.◀ ▶
Français
Utilisation de votre téléviseur comme écran d’ordinateur (PC)
Configuration de votre logiciel PC (instructions basées sur Windows XP)
En fonction de la version de Windows et de la carte vidéo, il se peut que les écrans
de votre PC présentent un aspect différent. Dans ce cas, les mêmes informations de
paramétrage de base seront presque toujours d’application. Dans le cas contraire,
contactez le fabricant de votre ordinateur ou votre revendeur Samsung.
1. Cliquez sur ‘Panneau de configuration’ dans le menu Démarrer de Windows.
2. Cliquez sur “Apparence et thèmes” dans le “Panneau de configuration”. Une boîte
de dialogue s’ouvre alors.
3. Cliquez sur “Affichage” et une boîte de dialogue apparaît.◀ ▶
Français
4. Naviguez vers l’onglet “Paramètres” dans la boîte de dialogue.
● S’il existe une option de fréquence verticale dans votre boîte de dialogue des
paramètres d’affichage, la valeur correcte est “60” ou “60 Hz”. Sinon, cliquez
sur “OK” et quittez la boîte de dialogue.◀ ▶
Français
❑ Changement du mode Son prédéfini
■ Mode Son
● Standardt: sélectionne le mode son normal.
● Musique: accentue la musique par rapport aux voix.
● Cinéma: offre le meilleur son pour les films.
● Voix claire: accentue les voix par rapport aux autres sons.
● Amplifier: augmente l’intensité du son aigu pour garantir une meilleure écoute
aux personnes malentendantes.
N Si l’option Sélection Haut-parleur est définie sur Ht-parl ext est désactivé.◀ ▶
Français
❑ Réglage des paramètres sonores
O MENUm → Son → Sound Effect →ENTERE
■ Effet sonore
● SRS TruSurround HD (Arrêt / Activé)
(mode de son standard uniquement)
Cette fonction garantit un son surround virtuel 5.1 canaux par le biais de deux
haut-parleurs grâce à la technologie HRTF (Head Related Transfer Function).
N Si l’option Sélection Haut-parleur est définie sur Ht-parl ext, SRS
TruSurround HD est désactivé.◀ ▶
Français
● SRS TruDialog (Arrêt / Activé)
(mode de son standard uniquement)
Cette fonction permet d’accentuer l’intensité d’une voix par rapport au fond
musical ou aux effets sonores, de manière à rendre les dialogues plus clairs.
N Si l’option Sélection Haut-parleur est définie sur Ht-parl ext, SRS TruDialog
est désactivé.◀ ▶
Français
● Egaliseur
Cette fonction permet de régler le mode de son (mode de son standard
uniquement).
– Balance G/D: règle la balance entre les haut-parleurs droit et gauche.
– 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (réglage de la bande passante): règle le
niveau des fréquences de bande passante spécifiques.
– Réinit.: rétablit les paramètres par défaut de l’égaliseur.
N Si l’option Sélection Haut-parleur est définie sur Ht-parl ext, Egaliseur est
désactivé.◀ ▶
Français
■ Options diffusion du son
● Langue audio
(chaînes numériques uniquement)
Permet de modifier la valeur par défaut des langues audio.
N La langue disponible peut varier en fonction de l’émission.
● Format Audio
(chaînes numériques uniquement)
Lorsque le son est émis à la fois par le haut-parleur principal et le récepteur
audio, un effet d’écho peut se produire en raison de la différence de vitesse de
décodage entre le haut-parleur principal et le récepteur audio. Dans ce cas,
utilisez la fonction Haut-parleur TV.◀ ▶
Français
N L’option Format Audio peut varier en fonction de l’émission. Le son Dolby
Digital 5.1 est disponible uniquement en cas de connexion d’un haut parleur
externe au moyen d’un câble optique.
● Description audio
(non disponible dans toutes les régions) (chaînes numériques uniquement)
Cette fonction traite le flux audio relatif à la description audio (AD) lorsqu’il est
envoyé avec le son principal par le radiodiffuseur.
N Description audio (Arrêt / Activé): active ou désactive la fonction de
description audio.
N Volume: permet de régler le volume de description audio.◀ ▶
Français
■ Paramètre supp.
(chaînes numériques uniquement)
● Niveau Audio DTV (MPEG / HE-AAC): cette fonction vous permet de régler le
niveau sonore souhaité (à savoir l’un des signaux reçus lors d’une émission de
télévision numérique).
N En fonction du type de signal de radiodiffusion, les options MPEG / HEAAC peuvent être définies sur une valeur comprise entre -10 dB et 0 dB.
N Pour augmenter ou diminuer le volume, réglez ces valeurs entre 0 et -10,
respectivement.◀ ▶
Français
● Sortie SPDIF: SPDIF (Sony Philips Digital InterFace) permet d’offrir un son
numérique et de réduire ainsi les interférences vers les haut-parleurs et divers
appareils numériques, tels qu’un lecteur DVD.
Format Audio: Vous pouvez sélectionner le format de sortie audio numérique
(SPDIF).
N Le format de sortie audio numérique (SPDIF) peut varier en fonction de la
source d’entrée.
Retard Audio: Permet de corriger les problèmes de synchronisation audiovidéo, lorsque vous regardez la télévision ou une vidéo, et d’écouter une sortie
audio numérique à l’aide d’un appareil externe tel qu’un récepteur AV (0 ms ~
250 ms).◀ ▶
Français
● Comp Dolby Digital (Line / RF): cette fonction réduit la différence de niveau
sonore entre un signal Dolby Digital et d’autre (à savoir, Audio MPEG, HE-AAC,
Son ATV).
N Sélectionnez Line pour obtenir un son dynamique et RF pour réduire la
différence de niveau sonore entre l’autre format audio.
Line: Permet de définir le niveau de sortie des signaux supérieurs ou inférieurs
à -31 dB (référence) sur -20 dB ou -31 dB.
RF: Permet de définir le niveau de sortie des signaux supérieurs ou inférieurs à
-20 dB (référence) sur -10 dB ou -20 dB.◀ ▶
Français
■ Paramètres haut-parleur
● Sélection Haut-parleur (Ht-parl ext / Haut-parleur TV): Lorsque le récepteur
Audio externe est utilisé en passant par SPDIF, un effet d’écho peut se produire
en raison de la différence de vitesse de décodage entre le haut-parleur principal
et le récepteur audio. Dans ce cas, réglez le téléviseur sur Ht-parl ext.
N Lorsque l’option Sélection Haut-parleur est définie sur Haut-parleur
ext, les boutons de volume et MUTE ne sont pas opérationnels et les
paramètres sonores sont limités.
N Lorsque Sélection Haut-parleur est défini sur Haut-parleur ext.
● Haut-parleur TV: Arrêt, Haut-parleur ext: Activé◀ ▶
Français
N Lorsque Sélection Haut-parleur est défini sur Haut-parleur TV.
● Haut-parleur TV: Activé, Haut-parleur ext: Activé
N En l’absence de signal vidéo, les deux haut-parleurs sont coupés.
● Volume auto (Arrêt / Normal / Nuit): Pour équilibrer le niveau de volume sur
chaque canal, définissez cette option sur Normal.
Nuit: Ce mode propose un meilleur son que celui du mode Normal, ne faisant
presque aucun bruit. Il s’avère particulièrement utile pendant la nuit.
■ Réinit. son (OK / Annuler)
Cette fonction permet de rétablir tous les paramètres sonores par défaut.◀ ▶
Français
❑ Connexion à un réseau câblé
Pour les séries PDP 550 et 570
Vous pouvez connecter votre téléviseur au réseau local de trois manières
différentes:
● En connectant le port LAN situé à l'arrière du téléviseur à un modem externe à
l'aide d'un câble LAN. Voir le schéma ci-dessous.
Préférence
Connecteur modem mural
LAN
Câble modem Câble LAN
Modem externe
(ADSL / VDSL / TV par câble)◀ ▶
Français
● En connectant le port LAN situé à l'arrière du téléviseur à un routeur IP
connecté, à son tour, à un modem externe. Utilisez le câble LAN pour la
connexion. Voir le schéma ci-dessous.
Connecteur
modem mural LAN
Câble modem Câble LAN Câble LAN
Modem externe
(ADSL / VDSL / TV par câble)
Routeur IP
(avec serveur DHCP)◀ ▶
Français
● En fonction de la configuration de votre réseau, il se peut que vous puissiez
connecter directement le port LAN situé à l'arrière du téléviseur à une prise
réseau murale à l'aide d'un câble LAN. Voir le schéma ci-dessous. Nous
attirons votre attention sur le fait que la prise murale est connectée à un
modem ou routeur situé en un autre point de la maison.
Connecteur LAN mural LAN
Câble LAN◀ ▶
Français
● Si vous possédez un réseau dynamique, vous devez utiliser un modem
ou routeur ADSL prenant en charge le protocole DHCP (Dynamic Host
Configuration Protocol). Les modems et routeurs de ce type fournissent
automatiquement l'adresse IP, le masque de sous-réseau, la passerelle et les
valeurs DNS dont votre téléviseur a besoin pour accéder à Internet. Aucune
saisie manuelle n'est donc requise. La plupart des réseaux domestiques sont
de type dynamique.
Certains réseaux nécessitent une adresse IP statique. Si tel est votre cas,
vous devez saisir manuellement l'adresse IP, le masque de sous-réseau, la
passerelle et les valeurs DNS dans l'écran de configuration câble de votre
téléviseur lors de la configuration de la connexion réseau. Pour obtenir ces
données, contactez votre fournisseur d'accès Internet. Si vous disposez d'un
ordinateur Windows, vous pouvez également utiliser ce dernier pour obtenir
ces paramètres.
N Si votre réseau nécessite une adresse IP statique, vous pouvez utiliser un
modem ADSL prenant en charge le protocole DHCP. En effet, les modems
de ce type vous permettent également d'utiliser des adresses IP statiques.◀ ▶
Français
❑ Configuration du réseau
Pour la série PDP 550 / 570
■ Paramètres réseau
O MENUm → Réseau → Paramètres réseau→ ENTERE
Définissez la connexion réseau de manière à utiliser divers services Internet, tels
que et AllShare, ou encore procéder à la mise à niveau du logiciel.
■ Etat du réseau
O MENUm → Réseau → Etat du réseau→ ENTERE
Vous pouvez vérifier l'état du réseau actuel et de la connexion Internet.◀ ▶
Français
■ Paramètres AllShare
O MENUm → Réseau → Paramètres AllShare→ ENTERE
Sélectionne l'utilisation de fonctions média sur le réseau.
■ Paramètre réseau (Auto.)
Utilisez l'option de configuration automatique du réseau lors de la connexion du
téléviseur à un réseau prenant en charge le protocole DHCP. Pour configurer
automatiquement la connexion réseau par câble de votre téléviseur, procédez
comme suit :◀ ▶
Français
Procédure de configuration automatique
1. Accédez à l'écran Paramètres réseau.
Pour ce faire, suivez les instructions de la
section Paramètres réseau.
2. Sélectionnez l'option Câble.
3. L'écran de test du réseau s'affiche et la
configuration du réseau est effectuée.
U Déplacer E Entrer R Retour
Paramètres réseau
Sélectionnez le type de connexion réseau.
Câble
Sans fil (général)
WPS(PBC)
One Foot
Connection
Connexion au réseau par câble réseau. Vérifiez que
le câble réseau est correctement branché. ◀ ▶
Français
N Si la configuration automatique échoue,
vérifiez la connexion du port LAN.
N Si les valeurs de connexion réseau sont
introuvables ou si vous souhaitez définir
la connexion manuellement, définissez
cette option sur Manuel. Reportez-vous
à la section "Procédure de configuration
manuelle"
● L'image affichée peut varier en fonction du modèle.
a Déplacer E Entrer R Retour
Paramètre réseau
La connexion au réseau sans fil et à Internet est maintenant terminée.
Réessayer OK
Adresse MAC 00:40:30:30:20:10
Adresse IP 192.168.10.21
Masque ss-réseau 255.255.255.0
Passerelle 192.168.10.1
Serveur DNS 203.248.252.2
La connexion à Internet a été établie avec succès.
Si vous rencontrez des problèmes lors de l'utilisation du service Internet,
contactez votre fournisseur d'accès.
Param. IP◀ ▶
Français
■ Paramètre réseau (Manuel)
Utilisez l'option de configuration manuelle du réseau lors de la connexion du
téléviseur à un réseau qui nécessite une adresse IP statique.
Obtention des valeurs de connexion au réseau
Pour obtenir les valeurs de connexion au réseau sur la plupart des ordinateurs
Windows, procédez comme suit:
1. Cliquez avec le bouton droit de la souris sur l'icône Réseau située dans le coin
inférieur droit de l'écran.
2. Cliquez sur Etat dans le menu contextuel.
3. Cliquez sur l'onglet Assistance dans la boîte de dialogue affichée.
4. Cliquez sur le bouton Détails dans l'onglet Assistance. Les valeurs de
connexion réseau sont affichées.◀ ▶
Français
Procédure de configuration automatique
Pour configurer manuellement la connexion réseau par câble de votre téléviseur,
procédez comme suit:
1. Suivez les étapes 1 et 2 de la procédure de
configuration automatique.
2. Sélectionnez Param. IP dans l'écran de
test du réseau.
3. Définissez Mode IP sur Manuel.
4. Appuyez sur le bouton d de la
télécommande pour accéder à l'Adresse IP
● L'image affichée peut varier en fonction du modèle.
U Déplacer E Entrer R Retour
Paramètres IP
Config. prot. Internet : Manuel r
Adresse IP . . .
Masque ss-réseau . . .
Passerelle . . .
DNS : Manuel
Serveur DNS . . .
OK◀ ▶
Français
5. Entrez les valeurs Adresse IP, Masque ss-réseau, Passerelle et Serveur
DNS. Utilisez les touches numériques de votre télécommande pour saisir des
chiffres et les touches fléchées pour passer d'un champ de saisie à un autre.
6. Lorsque vous avez terminé, sélectionnez OK.
7. L'écran de test du réseau s'affiche et la configuration du réseau est effectuée.◀ ▶
Français
❑ Connexion à un réseau sans fil
Pour la série PDP 550 / 570
Pour établir une connexion sans fil entre le téléviseur et le réseau, vous avez
besoin d'un routeur ou d'un modem et d'un adaptateur LAN sans fil Samsung
(WIS09ABGN, WIS09ABGN2, WIS10ABGN), que vous connectez à la prise USB
située sur le panneau latéral ou arrière du téléviseur. Voir l'illustration ci-dessous.
Connecteur LAN mural
Câble LAN
Wireless IP sharer
(router having DHCP server)
Adaptateur LAN
sans fil Samsung
Panneau arrière du
téléviseur◀ ▶
Français
L'adaptateur sans fil LAN Samsung est vendu séparément et est disponible
chez quelques revendeurs tels que les sites Ecommerce et Samsungparts.com.
L'adaptateur WLAN Samsung prend en charge les protocoles de communication
IEEE 802,11a/b/g et n. Samsung vous conseille d'utiliser le protocole IEEE 802,11n.
Si vous lisez une vidéo sur une connexion réseau, des saccades risquent d'apparaître.
N REMARQUE
● Vous devez employer l'adaptateur LAN sans fil Samsung (WIS09ABGN,
WIS09ABGN2, WIS10ABGN) pour utiliser un réseau sans fil.◀ ▶
Français
● Pour utiliser un réseau sans fil, votre téléviseur doit être connecté à un dispositif
de partage IP sans fil (un routeur ou un modem). Si ce routeur prend en charge
le protocole DHCP, le téléviseur peut utiliser DHCP ou une adresse IP statique
pour se connecter au réseau sans fil.
● Sélectionnez un canal inutilisé pour le routeur IP sans fil. Si le canal affecté au
routeur IP sans fil est actuellement utilisé par un autre périphérique à proximité,
il y aura des interférences et des interruptions de communication.
● Si vous utilisez des paramètres de sécurité différents de ceux indiqués cidessous, le routeur ne fonctionnera pas avec le téléviseur.◀ ▶
Français
● Si le mode Pure High-throughput (Greenfield) 802,11n est sélectionné et que
le type de cryptage est défini sur WEP, TKIP ou TKIP-AES (WPS2Mixed) pour
votre point d'accès, les téléviseurs Samsung ne prendront pas en charge la
connexion, conformément aux nouvelles spécifications de certification Wi-Fi.
● Si votre point d'accès prend en charge la norme WPS (Wi-Fi Protected Setup),
vous pouvez vous connecter au réseau via PBC (Push Button Configuration)
ou à l'aide d'un code PIN (Personal Identification Number). La fonction WPS
configurera automatiquement le SSID et la clé WPA dans ces deux modes.
● Si votre routeur, modem ou appareil n'est pas certifié, il risque de ne pas
pouvoir se connecter au téléviseur via l'adaptateur LAN sans fil Samsung.◀ ▶
Français
● Assurez-vous que le téléviseur est hors tension avant de connecter l'adaptateur
LAN sans fil Samsung.
● Méthodes de connexion: vous pouvez configurer la connexion réseau sans fil
de six façons différentes.
– Configuration automatique (à l'aide de la fonction Recherche réseau
automatique)
– Configuration manuelle
– WPS(PBC)
– Ad Hoc
– One Foot Connection
– Plug & Access◀ ▶
Français
● L'adaptateur LAN sans fil Samsung peut ne pas être reconnu si vous utilisez
une connexion par hub USB ou par câble d'extension USB autre que le câble
fourni.
■ Paramètre réseau (Auto.)
La plupart des réseaux sans fil disposent d'un système de sécurité en option qui
oblige les périphériques qui y accèdent à transmettre un code de sécurité chiffré,
appelé Clé d'accès ou de sécurité. Cette clé de sécurité repose sur une phrase
de passe ; il s'agit généralement d'un mot ou d'une série de lettres et de chiffres
d'une longueur donnée que vous avez été invité à saisir lors de la configuration de
la sécurité de votre réseau sans fil. Si vous utilisez cette méthode de configuration
et qu'une clé de sécurité est définie pour votre réseau sans fil, vous devrez saisir la
phrase de phase lors de la procédure de configuration.◀ ▶
Français
Procédure de configuration automatique
1. Accédez à l'écran Paramètres réseau.
Pour ce faire, suivez les instructions de la
section Paramètres réseau.
2. Sélectionnez Sans fil.
● L'image affichée peut varier en fonction du modèle.
U Déplacer E Entrer R Retour
Paramètres réseau
Sélectionnez le type de connexion réseau.
Câble
Sans fil (général)
WPS(PBC)
One Foot
Connection
Configurez le réseau sans fil en sélectionnant votre routeur
sans fil. En fonction de sa configuration, il vous sera peut-
être demandé d'entrer une clé de sécurité.◀ ▶
Français
3. La fonction Réseau recherche les réseaux sans fil disponibles. Lorsque vous
avez terminé, la liste des réseaux disponibles s'affiche.
4. Dans la liste des réseaux, appuyez sur le bouton u ou d pour sélectionner un
réseau, puis appuyez sur le bouton ENTERE.
N Si le point d'accès est caché (Invisible), vous devez sélectionner l'option
Ajouter réseau et entrer les valeurs Nom du réseau (SSID) et Code de
sécurité pour établir la connexion.
5. Si la fenêtre contextuelle Sécurité s'affiche, passez à l'étape 6. Si vous
sélectionnez le point d'accès dépourvu de sécurité, allez à l'étape 7.◀ ▶
Français
6. Si le point d'accès est sécurisé, entrez la
clé de sécurité (Sécurité ou Code PIN), puis
sélectionnez Terminé.
N Lors de la saisie de la clé de sécurité
(Sécurité ou Code PIN), utilisez les
touches u / d / l / r de votre
télécommande pour sélectionner des
chiffres/caractères.
N La phrase de passe doit normalement se trouver sur l'un des écrans
de configuration que vous avez utilisés pour configurer votre routeur ou
modem.
● L'image affichée peut varier en fonction du modèle.
a Précédent b Terminé n Déplacer E Entrer R Retour
Paramètre réseau
Entrez la clé de sécurité. 0 sais.
a
g
m
s
a/A
b
h
n
t
f
l
r
x
Espace
d
j
p
v
Supprimer
2
5
8
z
Terminé
c
i
o
u
F
1
4
7
y
e
k
q
w
3
6
9
0◀ ▶
Français
7. L'écran de connexion du réseau s'affiche et la configuration du réseau est
effectuée.
N Si la définition de la clé de sécurité (Sécurité ou Code PIN) échoue,
sélectionnez Réin. ou Param. IP.
N Si vous souhaitez définir manuellement la connexion, sélectionnez Param.
IP.. Reportez-vous à la section "Procédure de configuration manuelle"◀ ▶
Français
■ Config. du réseau (Manuel)
Utilisez l'option de configuration manuelle du réseau lors de la connexion du
téléviseur à un réseau qui nécessite une adresse IP statique.
Obtention des valeurs de connexion au réseau
Pour obtenir les valeurs de connexion au réseau sur la plupart des ordinateurs
Windows, procédez comme suit:
1. Cliquez avec le bouton droit de la souris sur l'icône Réseau située dans le coin
inférieur droit de l'écran.
2. Cliquez sur Etat dans le menu contextuel.◀ ▶
Français
3. Cliquez sur l'onglet Assistance dans la boîte de dialogue affichée.
4. Cliquez sur le bouton Détails dans l'onglet Assistance. Les valeurs de
connexion réseau sont affichées.
Procédure de configuration manuelle
Pour configurer manuellement la connexion réseau par câble de votre téléviseur,
procédez comme suit:
1. Suivez les étapes 1 et 2 de la procédure de configuration automatique.
2. Sélectionnez Param. IP dans l'écran de test du réseau.
3. Définissez Mode IP sur Manuel.◀ ▶
Français
4. Appuyez sur le bouton d de la télécommande pour accéder à l' Adresse IP.
5. Entrez les valeurs Adresse IP, Masque ss-réseau, Passerelle et Serveur
DNS. Utilisez les touches numériques de votre télécommande pour saisir des
chiffres et les touches fléchées pour passer d'un champ de saisie à un autre.
6. Lorsque vous avez terminé, sélectionnez OK.
7. L'écran de test du réseau s'affiche et la configuration du réseau est effectuée.◀ ▶
Français
■ Config. du réseau (WPS(PBC))
Configuration à l'aide de la méthode WPS(PBC)
Si votre routeur est pourvu d'un bouton PBC
(WPS), procédez comme suit:
1. Accédez à l'écran Paramètres réseau.
Pour ce faire, suivez les instructions de la
section Paramètres réseau.
2. Sélectionnez WPS(PBC).
3. Appuyez sur le bouton WPS(PBC) de votre
routeur dans les deux minutes. Votre téléviseur récupère automatiquement
tous les paramètres réseau dont il a besoin et se connecte à votre réseau.
4. L'écran de test du réseau s'affiche et la configuration du réseau est effectuée.
● L'image affichée peut varier en fonction du modèle.
U Déplacer E Entrer R Retour
Paramètres réseau
Sélectionnez le type de connexion réseau.
Câble
Sans fil (général)
WPS(PBC)
One Foot
Connection
Connectez-vous au routeur sans fil en appuyant simplement
sur le bouton WPS(PBC). Procédez de cette manière si votre
routeur sans fil prend en charge la méthode PBC.◀ ▶
Français
■ Paramètres réseau (One Foot Connection)
La fonction One Foot Connection vous permet de connecter automatiquement
votre téléviseur Samsung à un routeur Samsung sans fil placé votre point d'accès
à 25 cm de votre téléviseur. Si votre routeur sans fil ne prend pas en charge la
fonction One Foot Connection, vous devez vous connecter en utilisant l'une des
autres méthodes.
N Vous pouvez rechercher du matériel prenant en charge la fonction One Foot
Connection sur www.samsung.com.◀ ▶
Français
Configuration à l'aide de la fonction One Foot Connection
Mettez le routeur et le téléviseur sous tension.
1. Accédez à l'écran Paramètres réseau. Pour
ce faire, suivez les instructions de la section
Paramètres réseau.
2. Sélectionnez One Foot Connection.
3. Placer le routeur sans fil en parallèle avec
l'adaptateur LAN sans fil Samsung à une
distance inférieure à 25 cm.
● L'image affichée peut varier en fonction du modèle.
U Déplacer E Entrer R Retour
Paramètres réseau
Sélectionnez le type de connexion réseau.
Câble
Sans fil (général)
WPS(PBC)
One Foot
Connection
Connectez-vous automatiquement au réseau sans fil si votre point
d'accès prend en charge One Foot Connection. Pour sélectionner
ce type de connexion, positionnez le point d'accès à 25 cm de
votre TV.◀ ▶
Français
N Si la fonction One Foot Connection ne parvient pas à connecter le téléviseur
à votre point d'accès, une fenêtre contextuelle s'ouvre pour vous informer
de l'échec. Si vous essayez d'utiliser à nouveau One Foot Connection,
réinitialisez le point d'accès, déconnectez l'adaptateur LAN sans fil Samsung,
puis réessayez à partir de l'étape 1. Vous pouvez également opter pour l'une
des autres méthodes de configuration de la connexion.◀ ▶
Français
4. L'écran de connexion du réseau s'affiche et la configuration du réseau est
effectuée.
5. Placez le point d'accès à l'emplacement souhaité.
N En cas de modification des paramètres du point d'accès ou d'installation d'un
nouveau point d'accès, vous devez effectuer à nouveau la procédure One Foot
Connection en commençant à l'étape 1.◀ ▶
Français
■ Paramètre réseau (Plug & Access)
La fonction Plug & Access vous permet de connecter facilement votre routeur
sans fil Samsung à votre téléviseur Samsung à l'aide d'une clé USB. Si votre
routeur sans fil ne prend pas en charge la fonction Plug & Access, vous devez
vous connecter en utilisant l'une des autres méthodes.
N Vous pouvez rechercher du matériel prenant en charge la fonction Plug &
Access sur le site Web www. samsung.com
Configuration à l'aide de la fonction Plug & Access
Mettez le point d'accès et le téléviseur sous tension.
1. Insérez la clé USB dans le routeur sans fil Samsung et vérifiez l'état du voyant
du routeur (clignotant → allumé).
2. Enlevez ensuite la clé USB et insérez-la dans le téléviseur Samsung.◀ ▶
Français
3. Attendez que la connexion soit établie automatiquement.
N Si la fonction Plug & Access ne parvient pas à connecter le téléviseur à
votre routeur sans fil, une fenêtre contextuelle s'ouvre pour vous informer
de l'échec. Si vous essayez d'utiliser à nouveau Plug & Access, réinitialisez
le routeur sans fil, déconnectez l'adaptateur LAN sans fil Samsung, puis
réessayez à partir de l'étape 1. Vous pouvez également opter pour l'une des
autres méthodes de configuration de la connexion.
4. L'écran de connexion du réseau s'affiche et la configuration du réseau est
effectuée.
5. Placez le point d'accès à l'emplacement souhaité.
N En cas de modification des paramètres du routeur sans fil ou d'installation
d'un nouveau routeur sans fil, vous devez effectuer à nouveau la procédure
Plug & Access, en commençant à l'étape 1.◀ ▶
Français
Priorité HQS
Le routeur sans fil Samsung est une solution de diffusion AV HD optimisée
pour les téléviseurs numériques Samsung.
Il s'agit là d'une fonction distinctive de notre produit.
Le routeur sans fil Samsung peut être connecté à de nombreux périphériques, tels
que des ordinateurs portables, des téléphones mobiles, des lecteurs BD, etc.
Si vous connectez un téléviseur Samsung au routeur sans fil Samsung alors que
d'autres dispositifs sont déjà connectés, le routeur attribue au téléviseur une
connexion prioritaire.
Cette fonction garantit un débit et une qualité de diffusion optimales.
● Accélérez le débit de votre téléviseur en donnant priorité à la bande passante
de votre téléviseur (activation / désactivation facultative).
● En donnant la priorité aux téléviseurs Samsung, profitez du contenu HD sans
mise en mémoire tampon.
● La vitesse de connexion peut différer en fonction de l'environnement réseau.◀ ▶
Français
■ Paramètres réseau (Ad-Hoc)
Vous pouvez établir une connexion à un appareil mobile prenant en charge le
mode Ad-Hoc sans utiliser un point d'accès en passant par l'adaptateur LAN
sans fil Samsung. Lors de la connexion d'un appareil mobile, vous pouvez utiliser
des fichiers qui y sont stockés ou vous connecter à Internet à l'aide de la fonction
AllShare ou Multimédia.
Comment établir une nouvelle connexion Ad-hoc
1. Accédez à l'écran Paramètres réseau. Pour ce faire, suivez les instructions de
la section Paramètres réseau.
2. Sélectionnez Sans fil.◀ ▶
Français
3. Une fois la recherche d'un appareil mobile terminée, définissez le Nom du
réseau (SSID) et la clé de sécurité de l'appareil, puis établissez la connexion
réseau.
N Si le réseau ne fonctionne pas correctement, vérifiez à nouveau le Nom
du réseau (SSID) et la clé de sécurité. Une clé de sécurité incorrecte peut
provoquer un dysfonctionnement.
N Lorsque vous connectez un appareil, il s'affiche dans la liste Paramètre
réseau. La prochaine fois que vous le connecterez, vous le trouverez dans
cette liste.◀ ▶
Français
Si le téléviseur ne parvient pas à se connecter à Internet
Il se peut que la connexion échoue car votre fournisseur d'accès Internet a enregistré, de
manière permanente, l'adresse MAC (numéro d'identification unique) de votre ordinateur ou
modem et qu'il utilise cette adresse à des fins d'authentification chaque fois que vous vous
connectez à Internet. Cela a pour but d'empêcher tout accès non autorisé. Dans la mesure
où votre téléviseur possède une adresse MAC différente, votre fournisseur d'accès Internet
ne peut pas l'authentifier, ce qui rend impossible toute connexion.
Pour remédier à ce problème, demandez à votre fournisseur d’accès la procédure à suivre
pour connecter des appareils autres que votre PC (votre téléviseur, par exemple) à Internet.
Si votre fournisseur d'accès exige un identifiant (ID) ou un mot de passe pour la connexion
à Internet, votre téléviseur ne pourra peut-être pas se connecter à Internet. Si tel est le cas,
vous devez entrer l'identifiant ou le mot de passe lors de la connexion à Internet.
La connexion à Internet peut échouer en raison d'un problème de pare-feu. Dans ce cas,
contactez votre fournisseur d'accès Internet.
Si vous ne parvenez toujours pas à vous connecter à Internet après avoir suivi les procé-
dures indiquées par votre fournisseur d'accès.◀ ▶
Français
❑ Réglage de l'heure
O MENUm → Système → ENTERE
■ Heure
● Horloge: le réglage de l'heure est nécessaire pour utiliser différentes fonctions
de minuterie du téléviseur.
O L'heure actuelle s'affiche à chaque fois que vous appuyez sur le bouton
INFO.
N Si vous débranchez le cordon d'alimentation, vous devez régler à nouveau
l'horloge.
– Mode Horloge (Auto. / Manuel)
Auto.: règle automatiquement l'heure en fonction des signaux diffusés par
une chaîne numérique.◀ ▶
Français
N L'antenne doit être connectée pour permettre le réglage automatique de
l'heure.
Manuel: permet de régler l'heure manuellement.
N En fonction du signal et de la stati