UE40ES5500/ZF, Slim LED 40", SMART TV UE40ES5500W - Mode d'emploi - Manuel de l'utilisateur - Manuels- Samsung

SAMSUNG sur FNAC.COM  - Liste des manuels utilisateur Samsung

- Revenir à l'accueil

 

 

 

 

Description

Date de distribution descending

Langue

Fichier descending

Guide Skype 2012.07.12 ANGLAIS 4.2 MB
fileDown
Guide Skype 2012.07.12 FRANÇAIS 4.15 MB
fileDown
Manuel de l'utilisateur 2012.04.24 ANGLAIS 4.2 MB
fileDown
Manuel de l'utilisateur 2012.04.24 FRANÇAIS 4.15 MB
fileDown
Guide Skype 2012.04.05 ANGLAIS 3.01 MB
fileDown

http://www.samsung.com/fr/support/model/UE40ES5500WXZF-downloads

http://downloadcenter.samsung.com/content/UM/201207/20120712095934377/2012_Skype_ENG-0424.pdf

http://downloadcenter.samsung.com/content/UM/201207/20120712095934377/2012_Skype_FRA-0424.pdf

http://downloadcenter.samsung.com/content/UM/201204/20120424095934377/01-XTDVBEUE-ENG-0327.pdf

http://downloadcenter.samsung.com/content/UM/201204/20120424095934377/02-XTDVBEUE-FRA-0327.pdf

http://downloadcenter.samsung.com/content/UM/201204/20120405165711377/2012_Skype_Eng-0316-1.pdf

 

 

 

Manuels Utilisateurs Samsung :

Samsung-NP300E5C-NP300E5C-T01FR-Manuels

Samsung-LE19C350-LE19C350D1W-Manuels

Samsung-PS50C450-PS50C450B1W-Manuels

Samsung-LE22C452C4H-Manuels

Samsung-PS50A566-PS50A566S2M-Manuels

Samsung-LE40A577P2M-Manuels

Samsung-20-XTDVBEUE-NOR-0327.pdf-E-Manual-Norvege-Manuels

Samsung-LE26B450-LE26B450C4W-Manuels

Samsung-PS51D490A1W-Manuels

Samsung-Kit-Pieton-Bluetooth-HM1200-Noir-HM1200-Manuels

Samsung-UE32D6530WS-Manuels

Samsung-NP530U3C-A01ES-NP530U3C-A01ES-Espagnol-Manuels

/Samsung-GALAXY-Y-Pro-Duos-GT-B5512-RUSSE-Manuels

Samsung-GALAXY-S-II-GT-I9100-SINGAPOUR-Manuels

Samsung-NP300E5ZI-NP300E5Z-A09MA-Manuels

Samsung-32-UE32D4000WXZF-serie-4-HD-TV-LED-TV-UE32D4000NW-Manuels

Samsung-UE46C6805-UE46C6805US-Norvege-Manuels

Samsung-UE40B6050-UE40B6050VW-Norvege-Manuels

Samsung-PS50C535-PS50C535C1W-Norvege-Manuels

Samsung-55-Smart-3D-LED-TV-ES6805-UE55ES6805U-Norvege-Manuels

Samsung-51-Smart-3D-Plasma-E8005-PS51E8005GU-Norvege-Manuels

Samsung-51-Smart-3D-Plasma-E555-PS51E555D1K-Norvege-Manuels

Samsung-46-Smart-3D-LED-TV-ES7005-UE46ES7005U-Norvege-Manuels

Samsung-46-Smart-3D-LED-TV-ES6535-UE46ES6535U-Norvege-Manuels

Samsung-40-Smart-3D-LED-TV-ES6565-UE40ES6565U-Norvege-Manuels

Samsung-46-Smart-3D-LED-TV-ES6565-UE46ES6565U-2012_Skype_NOR-0424.pdf-E-Manual-Norvege-Manuels

Samsung-51-Smart-3D-Plasma-E8005-PS51E8005GU-Norvege-Manuels

Samsung-LE46C630-LE46C630K1W-Manuels

Samsung-T240-JP-Manuels

Samsung-821SC-JP-Manuels

Samsung-941SC-JP-Manuels

Samsung-740SC-JP-Manuels

Samsung-940SC-JP-Manuels

Samsung-GALAXY-Tab-7.0-Plus-SC-02D-JP-Manuels

Samsung-SNE-60K_UM_Embedded_KOR_100526-SEC-Manuels

Samsung-M_YUKON_2K_WD175ARYKSU_DC68-02631L-05-120810.pdf-SEC-Manuels

Samsung-DA68-01829P.pdf-SEC-Manuels

Samsung-DA68-01829P.pdf-Manuels

Samsung-LE52A676-LE52A676A1M-Manuels

Samsung-UE55C8700-UE55C8790XS-Manuels

Samsung-22-LE22D450WXZF-serie-4-Full-HD-LCD-TV-LE22D450G1W-Manuels

Samsung-40-UE40D8000WXZF-serie-8-SMART-TV-3D-FULL-HD-LED-TV-UE40D8000YS-Manuels

Samsung-UE40ES7000-ZF-Slim-LED-40-SMART-INTERACTION-3D-UE40ES7000S-Manuels

Samsung-Galaxy-Tab-2-10.1-GT-P5100-Manuels

Samsung-Galaxy-Tab-2-7.0-GT-P3100-Manuels

Samsung-S22B350B-Manuels

Samsung-51-PS51E490WXZF-serie-4-3D-HD-TV-PDP-TV-PS51E490B1W-Manuels

Samsung-Galaxy-Note-II-GT-N7100-Manuels

Samsung-GT-I9300-Manuels

SAMSUNG/SAMSUNG-DV90-Manuels

Samsung-GT-N8000-Manuels

Samsung-AQV12KBBN-Pologne-Manuels

Samsung-ML-2165W-Roumanie-Manuels

Samsung-Notebook-Serie-7-Chronos-700Z5C-S01-NP700Z5C-S01DE-Manuels

Samsung-Player-One-noir-Open-market-GT-S5230-Manuels

Samsung-LE32E420E2W-Manuels

Samsung-910MP-Manuels

Samsung-Galaxy-S-SCL-noir-Open-market-GT-I9003-M4-Manuels

Samsung-Samsung-Galaxy-Pro-gris-Open-market-GT-B7510-Manuels

Samsung-Galaxy-Gio-noir-SFR-GT-S5660-Manuels

Samsung-Galaxy-Teos-noir-Bouygues-GT-I5800-Manuels

Samsung-Galaxy-Spica-noir-Bouygues-GT-I5700-Manuels

Samsung-Omnia-Pro-B7610-noir-Open-market-GT-B7610-Manuels

Samsung-S5610-GT-S5610-Manuels

Samsung-LE32C650-LE32C650L1W-Manuels

Samsung-LE26D450G1W-Manuels

Samsung-N145Plus-NP-N145P-Manuels

Samsung-N150-NP-N150-Manuels

Samsung-NP20-NP20FK02BG-SEF-Manuels

Samsung-GT-S5570_UM_Open_Gingerbread_Fre_Rev.1.0_110726_Screen.pdf-Manuels

Samsung-GT-I9070P_UM_Open_Gingerbread_Fre_Rev.1.0_120710_Screen.pdf-Manuels

Samsung-GT-I9300_UM_Open_Icecream_Fre_Rev.1.2_120725_Screen.pdf-Manuels

Samsung-LE32D400E1W-Manuels

Samsung-Gainable-Slim-MH026FEEA-Manuels

Samsung-CW21Z573N-Manuels

Samsung-40-UE40D5700WXZF-serie-5-SMART-TV-FULL-HD-LED-TV-UE40D5700RS-Manuels

Samsung-UE46C8700-UE46C8790XS-Manuels

Samsung-UE32D5700RS-Manuels

Samsung-UE46ES6300-ZF-Slim-LED-46-SMART-TV-3D-UE46ES6300S-Manuels

Samsung-2012_Skype_Eng-0316-1-Manuels

Samsung-NS140SDXEA-Manuels

Samsung-MH050FXEA2B-Manuels

Samsung-UE75ES9000S-Slim-LED-75-SMART-Interaction-3D-Manuels

Samsung-RR92HAWW-Manuels

Samsung-GT-P6200-Manuels

Samsung-Refrigerateur-1porteA-350-L-Blanc-RR82FHSW-Manuels

Samsung-UE26EH4000-ZF-LED-26-HD-TV-UE26EH4000W-Manuels

Samsung-E-MANUAL-X9DVBEU4E-ENG-Manuel

Samsung-GT-S5360_UM_Open_Gingerbread_Fre_Rev.1.0_111130_Screen-Manuel

Samsung-Galaxy-Tab-10-1-GT-P7500-M16-Manuel

Samsung-Galaxy-Tab-10-1-GT-P7500-M16-Manuels

Samsung-GT-S5360-Manuels

Samsung-Lecteur-Multimedia-Galaxy-S-WiFi-4-0-Blanc-8Go-YP-G1CW-Manuels

Samsung-Galaxy-551-noir-Open-marketGT-I5510-Manuels

Samsung-Galaxy-Note-10-1-GT-N8000-Manuels

Samsung-GALAXY-S-II-LTE-SC-03D-JP-Manuels

Samsung-GALAXY-Note-SC-05D-JP-Manuels

Samsung-NP-R530-NP-R530-JA02FR-Manuels

Samsung-UE40C6000-UE40C6000RW-Manuels

Samsung-Congelateur-1porteA-277-L-Blanc-RZ80FHSW-Manuels

Samsung-GT-B5310-Manuels

Nexus-S-noir-Open-market-GT-I9023-GT-B5310-Manuels

Samsung-32-LE32D450WXZF-serie-4-HD-TV-LCD-TV-Manuels

Samsung-46-UE46D5700WXZF-serie-5-SMART-TV-FULL-HD-LED-TV-UE46D5700RS-Manuels

Samsung-UE55ES6560S-Manuels

Samsung-UE46ES8000-ZF-Slim-LED-46-SMART-INTERACTION-3D-UE46ES8000S-Manuels

Samsung-UE55ES6300-ZF-Slim-LED-55-SMART-TV-3D-UE55ES6300S-Manuels

Samsung-AQV18UGAX-Manuels

Samsung-UE50EH5300W-Manuels

Samsung-LE46A676-LE46A676A1M-Manuels

Samsung-UE46C7700-UE46C7700WS-Manuels

Samsung-CW21Z503N-Manuels

Samsung-AQ18UGFN-Manuels

Samsung-Refrigerateur-DP-A275-L-Blanc-RT34GBSW-Manuels

Samsung-UE46ES6100W-Manuels

Samsung-RR92HASX-Manuels

Samsung-LE40S71B-Manuels

Samsung-UE32ES6710-ZF-Slim-LED-32-SMART-TV-3DUE32ES6710S-Manuels

Samsung-Galaxy-Ace-noir-Open-market-GT-S5830-Manuels

Samsung-GALAXY-Tab-GT-P1000-GT-P1000-M16-Manuels

Samsung-Omnia-Pro-B7330-noir-Open-market-GT-B7330-Manuels

Samsung-Omnia-Lite-noir-Orange-GT-B7300-Manuels

Samsung-Galaxy-S2-GT-I9100-Manuels

Samsung-Nexus-S-noir-Open-market-GT-I9023-Manuels

Samsung-Omnia-II-noir-SFRGT-I8000-Manuels

Samsung-Omnia-II-noir-SFR-GT-I8000-Manuels

Samsung-Omnia-7-noir-Open-market-GT-I8700-Manuels

Samsung-Galaxy-noir-Bouygues-GT-I7500-Manuels

Samsung-Galaxy-mini-gris-Open-market-GT-S5570-Manuels

Samsung-XE700T1A-HF1FR-Manuels

17,3" Série 3 300E7A - NP300E7A-S01FR - Manuels

40", UE40D6500WXZF, série 6, SMART TV, 3D, FULL HD, LED TV - UE40D6500VS - Manuels

CLX-3185FW Manuels

Galaxy Ace GT-S5830

Galaxy S II GT-I9100

Galaxy Tab 8.9 GT-P7310/M16

Galaxy Tab 10.1 GT-P7500/M16

Galaxy YGT-S5360

LE32C350 LE32C350D1W

LE40C630 LE40C630K1W

MM-C330D

MM-D330D

Micro-chaîne, MM-D330DWXZF, série 3 - MM-D330 - Manuels

N145Plus - NP-N145P - Manuels

N150 - NP-N150 - Manuels

RSH5UEPN

SGH-F490

Samsung Galaxy Ace noir - Open market - GT-S5830 - Manuels

Samsung Galaxy S II noir - Open market - Manuels

Samsung Galaxy S III - GT-I9300 - Manuels

Samsung Galaxy S noir - Open market - GT-I9000 - Manuels

Samsung Galaxy NoteGT-N7000

Samsung Galaxy SGT-I9000

Série 3 300E7A - NP300E7A-S03FR - Manuels

T23A550 T23A550

UE40D6500ZF UE40D6500VS

UE55ES8000/ZF, Slim LED 55", SMART INTERACTION, 3D - UE55ES8000S - Manuels

Wave 575 GT-S5750E

Wave II GT-S8530

16/4ppm Imprimante laser couleur CLP-310 Manuels

16/4ppm Multifonction lasercouleur CLX-3170FN Manuels

16/4ppm Multifonction lasercouleur CLX-3185FW Manuels Samsung

16/4ppm Multifonction laser couleur CLX-3185 Manuels Samsung

samsung-Wave-II-noir-Open-market-GT-S8530-Manuels

Samsung-Wave-noir-Open-market-GT-S8500-Manuels

Samsung-Wave-M-noir-Open-market-GT-S7250-Manuels

Samsung-Wave-578-noir-Open-market-GT-S5780-Manuels

Samsung-Wave-533-noir-Open-market-GT-S5330-Manuels

Samsung-Wave-3-noir-Open-market-GT-S8600-Manuels

Samsung-Player-HD-noir-Open-market-GT-I8910-Manuels

Samsung-Player-Duo-noir-Open-market-SGH-D980-Manuels

Samsung-Player-Addict-noir-Open-market-SGH-I900-Manuels

Samsung-Omnia-W-noir-Open-market-GT-I8350-Manuels

PRODUITS SAMSUNG :
Belkin Chargeur Secteur pour Samsung Galaxy S
Belkin Coque pour Samsung Galaxy S3 - Noire Translucide
Belkin Etui cuir Verve Folio pour Samsung Galaxy S II
Belkin Etui Pouch pour Samsung Galaxy S3 - Noir
Belkin Kit de Charge Secteur + Automobile pour Samsung Galaxy S
Belkin Lot de 3 protections d'écran pour Samsung Galaxy S3
Belkin Lot de 3 protections d'écran pour Samsung Galaxy S3 - Anti-reflets
Belkin Lot de 3 protections d'écran Screen Guard pour Samsung Galaxy SII - Transparentes
Belkin Micro-Chargeur allume-cigares pour Samsung Galaxy S
Belkin Protection d'écran Screen Guard pour Samsung Galaxy SII - Confidentialité 360°
Câble Omenex Plug & Phone pour Samsung
Câble Omenex Plug & Phone pour Samsung
Coque semi-rigide glossy noire pour Samsung Galaxy S II
Déclencheur sans Fil Hahnel combi TF pour Canon/Pentax/Samsung
Enceintes iLuv iSM524 noir pour Samsung Galaxy Tab
Etui-Brassard Belkin DualFit pour Samsung Galaxy S II
Etui Samsung CC9S70B noir
Fnac chargeur secteur POWY pour Samsung SGH-D800
G-Mobility Pack confort pour Samsung Galaxy SII i9100
Imprimante Samsung CLX-3185FN - Ethernet
Kensington Etui pliant pour Samsung Galaxy Tab
Le Tanneur Etui cuir Pouch pour Samsung Galaxy S11 I9100 - Noir
Lunettes 3D actives Samsung SSG-4100GB
Modelabs 2 protections écran pour Samsung Galaxy ACE S5830
Modelabs Lot de 2 protections d'écran One Touch pour Samsung Galaxy Y S5360 - Transparentes
Modelabs Lot de 2 protections d'écran pour Samsung Galaxy Note - Transparentes
Muvit Adaptateur Jack 3,5 mm pour Samsung (ancienne connectique)
Muvit Coque à rabat Agenda pour Samsung Galaxy Note - Noire
Muvit Coque Doodle Coeur pour Samsung i9000 Galaxy S
Muvit Coque Doodle Extraterrestres pour Samsung i9000 Galaxy S
Muvit Coque Doodle Rose pour Samsung i9000 Galaxy S
Muvit Coque silicone pour Samsung Galaxy Ace
Muvit Coque silicone pour Samsung Galaxy - Noire
Muvit Etui Clapet pour Samsung I9100 - Noir
Muvit Etui Slim Clapet pour Samsung Galaxy Note
Muvit Housse Minigel pour Samsung Galaxy - Noire
Muvit Lot de 2 protections d'écran pour Samsung nexus S - 1 Miroir/1 Secret
Muvit Lot de 2 protections d'écran pour Samsung S5830
Muvit Pack Accessoires pour Samsung S5830
Muvit Sticker Carbone pour Samsung I9100
Muvit Sticker Drapeau pour Samsung I9100 - I Love Ibiza
Muvit Sticker Drapeau pour Samsung I9100 - I Love London
Muvit Sticker Drapeau pour Samsung I9100 - I Love New-York
Muvit Sticker Drapeau pour Samsung I9100 - I Love Paris
Muvit Sticker Drapeau pour Samsung I9100 - I Love Tokyo
Muvit Sticker Drapeau pour Samsung I9100 - United Kingdom
Muvit Sticker Drapeau pour Samsung I9100 - USA
QDOS Coque Cubic pour Samsung Galaxy II I9100
QDOS Coque Steel 4 pour Samsung Galaxy S II
Samsung 305U1A 11,6" LED
Samsung 305U1A 11,6" LED + Office Famille et Etudiant 2010 1 poste
Samsung B1930HD 18.5" LCD TNT HD
Samsung B5722 Double SIM
Samsung Bac papier supplémentaire ML-S3710A - 520 feuilles
Samsung Batterie ED-BP1310
Samsung batterie IA-BH130LB
Samsung batterie IA-BP420E
Samsung batterie IA-BP85ST
Samsung batterie SLB-10A
Samsung batterie SSB-690 ELS
Samsung BD-E5300
Samsung BD-E5500 3D
Samsung BD-E6100 3D
Samsung BD-E8300 3D
Samsung BD-ES5000
Samsung BD-ES6000 3D
Samsung C3050 Stratus
Samsung Câble Adaptateur HDTV pour Galaxy Tab 8.9" / 10.1"
Samsung Câble data pour téléphones mobiles Samsung
Samsung caméra Skype CY-STC1100
Samsung CB20A12
Samsung Ch@t335 - GT-S3350 - Noir
Samsung Chargeur allume-cigares micro-USB
Samsung chargeur de voyage pour SGH-P260 et SGH-G600 - Modèle Noir
Samsung Chargeur secteur de voyage micro-USB
Samsung CLP-325 + Toner Samsung CLT-K4072S Noir
Samsung CLP-325 + Toner Samsung CLT-K4072S Noir
Samsung CLP-620ND - Imprimante Ethernet
Samsung CLP-C300A
Samsung CLP-K300A
Samsung CLP-M300A
Samsung CLP-Y300A
Samsung CLX-3185FW WiFi
Samsung CLX-3185FW WiFi + Toner Samsung CLT-K4072S Noir + MCL Samar câble imprimante USB 2.0
Samsung CLX-3185N Ethernet
Samsung CLX-3185W - Imprimante Multifonctions WiFi & Ethernet
Samsung CLX-6220FX - Imprimante Multifonctions Ethernet
Samsung Coque pour Galaxy S3 - Blanche
Samsung Coque pour Galaxy S3 - Noire
Samsung CY-SMN1000D meuble TV
Samsung Disque Dur interne SSD 128 Go - 830 Series
Samsung Disque Dur interne SSD 128 Go MZ-7PC128N 830 Series
Samsung Disque Dur interne SSD 256 Go MZ-7PC256D 830 Series
Samsung Disque Dur interne SSD 256 Go MZ-7PC256N 830 Series
Samsung Disque Dur interne SSD 512 Go - 830 Series
Samsung Disque Dur interne SSD 64 Go - 830 Series
Samsung Disque Dur interne SSD 64 Go MZ-7PC064D 830 Series
Samsung dongle Wi-Fi WIS12ABGNX
Samsung DP7000A3B 23" LED Tactile USB 3.0 + Samsung ML-2165 - Imprimante Monochrome
Samsung DP7000A3B 23" LED Tactile USB 3.0 + Sennheiser RS170
Samsung DP7000A3B-A01FR 23" LED Tactile USB 3.0
Samsung DP700A3B-S02FR 23" LED Tactile
Samsung Duo de 2 coques pour Samsung Galaxy II I9100 - 1 Noire + 1 Camel
Samsung Duo de 2 coques pour Samsung Galaxy II I9100 - 1 Noire matelassée + 1 Rose
Samsung DV300F Argent/Rouge - WiFi
Samsung DV300F Argent/Rouge - WiFi + Etui
Samsung DV300F Noir - WiFi
Samsung DV300F Noir - WiFi + Etui
Samsung E1150 - Silver
Samsung ES90 Noir
Samsung Etui coque pour Galaxy Note - Noir
Samsung Etui coque pour Samsung Galaxy Y S5360 - Noir
Samsung Etui cuir pour Galaxy S II - Noir
Samsung Etui rabat pour Samsung Galaxy S3 - Noir
Samsung Eui cuir pour i9000 Galaxy S
Samsung EX1
Samsung Flash SEF15A
Samsung Flash SEF20A
Samsung Galaxy Ace s5830 (sous Android)
Samsung Galaxy Mini (sous Android)
Samsung Galaxy Note
Samsung Galaxy Note - Blanc
Samsung Galaxy Note - Dark Blue
Samsung Galaxy S2 (I9100G) - Blanc
Samsung Galaxy S2 (I9100G) - Noir
Samsung Galaxy S3 (I9300) - Blanc Marbre
Samsung Galaxy S3 (I9300) - Bleu Galet
Samsung Galaxy S WiFi 4,2" 16 Go
Samsung Galaxy Tab 10,1" TFT 16 Go Blanc Wifi
Samsung Galaxy Tab 10,1" TFT 16 Go Blanc Wifi + HP Housse Mini Sleeve 10,2" pour Netbook et Tablette - Ocean Drive
Samsung Galaxy Tab 10,1" TFT 16 Go Noir Wifi
Samsung Galaxy Tab 10,1" TFT Blanc + Western Digital My Book Live 1 To Ethernet
Samsung Galaxy Tab 10,1" TFT Noir + Western Digital My Book Live 1 To Ethernet
Samsung Galaxy Tab 2 10,1" 16 Go - Argent
Samsung Galaxy Tab 2 10,1" 16 Go - Blanc
Samsung Galaxy Tab 2 7.0" LED 8 Go
Samsung Galaxy Tab 8,9" TFT Blanc 32 Go Wifi
Samsung Galaxy Y Pro B5510 (sous Android)
Samsung Galaxy Y Young s5360 (sous Android)
Samsung Graveur DVD Externe Wifi - SE-208BW - Noir
Samsung Graveur Externe BluRay SE-506AB
Samsung HMX-F80 Noir
Samsung HMX-Q20 Noir
Samsung HMX-QF20 Noir
Samsung HMX-W350 Noir (tout terrain) + Kit Accessoires Sport + micro SDHC 8 Go
Samsung HMX-W350 Rouge (tout terrain) + Kit Accessoires Sport + micro SDHC 8 Go
Samsung Housse Folio pour Galaxy Tab 10,1"
Samsung Housse Folio pour Galaxy Tab 8,9"
Samsung HT-D330
Samsung HT-D350
Samsung HT-D4500
Samsung HT-D5000 3D
Samsung HT-E4200 3D
Samsung HT-E4500 3D
Samsung HT-E5200 3D
Samsung HT-E5530 3D
Samsung HT-ES4200 3D
Samsung HT-ES6200 3D
Samsung HT-ES8200 3D
Samsung HW-E350
Samsung HW-E450
Samsung I9103 Galaxy R (sous Android)
Samsung Kit de connexion USB & SD pour Galaxy Tab 10.1"
Samsung Kit de vidéosurveillance tout-en-un SDE-3003P/EX
Samsung Kit de vidéosurveillance tout-en-un SME-4220
Samsung kit HDMI
Samsung kit papier 10 x 15 cm
Samsung kit piéton filaire stéréo Jack 3,5 mm
Samsung LE32E420
Samsung LE40D503
Samsung ML-1630/SCX4500
Samsung ML-2010D3
Samsung ML-2165 - Imprimante Monochrome
Samsung ML-2165W - Imprimante WiFi
Samsung ML-2545 - Imprimante Monochrome
Samsung ML-2955DW - Imprimante Ethernet & WiFi
Samsung ML-2955ND - Imprimante Ethernet
Samsung ML-3310D - Imprimante Monochrome
Samsung ML-3710DW - Imprimante Ethernet & WiFi
Samsung MLT-D1052S
Samsung MLT-D1082S
Samsung MLT-D1092S
Samsung MM-D430D
Samsung MM-E320
Samsung MV800 Noir
Samsung MV800 Noir + Etui Zadig & Voltaire Noir
Samsung NP300E7A-S09FR 17,3" LED
Samsung NP700Z5C 15.6" LED
Samsung NP-RC730-S07FR 17.3"LED
Samsung NX1000 Noir + Obj. Samsung NX 18 - 55 mm f/3.5 - 5.6 OIS
Samsung NX200 Noir + Obj. Samsung NX 20 - 50 mm f/3.5 - 5.6 ED i-Function + Flash SEF-8A NG8
Samsung NX 50 - 200 mm f/4.0 - 5.6 ED OIS II i-Fonction; Dédié Boîtiers Hybrides
Samsung NX 60 mm f/2.8 ED OIS SSA Macro i-Function; dédié Boîtiers Hybrides
Samsung NX 85 mm f/1.4 ED SSA i-Function; dédié Boîtiers Hybrides
Samsung NX Pancake 16 mm f/2.4 i-Function; dédié Boîtiers Hybrides
Samsung NX Pancake 20 mm f/2.8 i-Function; dédié Boîtiers Hybrides
Samsung NX Pancake 30 mm f/2.0; dédié Boîtiers Hybrides
Samsung Oreillette Bluetooth HM1200
Samsung Pack d'accessoire pour Galaxy S II I9100
Samsung Pack HMX-F800 Noir : Caméscope HD + Etui + Carte SDHC 4 Go
Samsung Pack HMX-Q200 Noir : Caméscope Full HD + Etui + Carte SDHC 4 Go
Samsung PC portable NP300E5A-S0AFR 15.6"LED
Samsung PL210 Noir
Samsung PL210 Noir + Carte mémoire Lexar MicroSDHC 8 Go
Samsung Player mini 2 c3310 - Gris Métal
Samsung Port parallèle ML-PAR100 pour imprimante
Samsung PS43E450
Samsung PS43E490 3D
Samsung PS43E490 3D + Console Xbox 360 4 Go
Samsung PS51E450
Samsung PS51E490 3D
Samsung PS51E530
Samsung Q3 noir 4 Go
Samsung Q3 rose 4 Go
Samsung RC530-S03FR 15,6" LED
Samsung RF712 E7P-C7261 17,3" LED 3D Blu-Ray USB 3.0 + lunettes
Samsung S19A100N Moniteur 18,5" - Flat Panel Display
Samsung S22B150N 21,5" LED
Samsung S22B350H 21,5" LED
Samsung S23A750D 23" LED 3D
Samsung S23B350H 23" LED
Samsung S23B550V Moniteur 23" LED
Samsung S24B300HL Moniteur 23,6" LED
Samsung S27B350H 27" LED
Samsung SCX-3405F - Imprimante Multifonctions
Samsung SCX-3405FW - Imprimante Multifonctions WiFi & Ethernet
Samsung SCX-3405 - Imprimante Multifonctions
Samsung SCX-3405W - Imprimante Multifonctions WiFi
Samsung SCX-4200A
Samsung SCX-4729FD - Imprimante Multifonctions Ethernet
Samsung SCX-4729FW - Imprimante Multifonctions Ethernet & WiFi
Samsung SCX-5737FW - Imprimante Multifonctions Ethernet
Samsung SE208AB Graveur DVD externe USB 2.0
Samsung SE-218BB graveur DVD externe ultra slim USB 2.0
Samsung SLB07A pour ST50
Samsung SLB-11A pour Samsung WB1000
Samsung ST200F Noir - WiFi
Samsung ST200F Rouge - WiFi
Samsung ST200F Violet - WiFi
Samsung ST65 Noir
Samsung ST65 Rouge
Samsung ST66 Noir
Samsung ST77 Blanc
Samsung ST77 Noir
Samsung ST77 Rouge
Samsung ST77 Violet
Samsung ST88 Noir
Samsung station d'accueil
Samsung station d'accueil HD2
Samsung Station d'accueil pour tablette Galaxy Tab 8,9"
Samsung station d'accueil SSD-760 E2/EUR
Samsung SyncMaster C23A550U 23" LED
Samsung SyncMaster C23A750X 23" LED
Samsung Syncmaster S23A700D 23" LED 3D
Samsung Syncmaster T22A550 21,5" LED Tuner TNT HD
Samsung Système de vidéosurveillance Baby Monitor SEW-3022WP/ EX
Samsung T22A300 21.5" Tuner TNT HD
Samsung T22B300EW 21,5" LED Tuner TNT HD
Samsung T24B301 24" LED Tuner TNT HD
Samsung T27A550 27" LED Tuner TNT HD
Samsung Toner MLT-D101S pour imprimantes Samsung SCX-3405 & ML-2165 - Noir
Samsung UE19ES4000 LED
Samsung UE22ES5000 LED
Samsung UE22ES5410 LED
Samsung UE26EH4000 LED
Samsung UE26EH4500 LED
Samsung UE32EH4000 LED
Samsung UE32EH5000 LED
Samsung UE32ES5500 LED
Samsung UE32ES6300 LED 3D
Samsung UE32ES6300 LED 3D + Console Xbox 360 4 Go
Samsung UE32ES6710 LED 3D blanc
Samsung UE37ES5500 LED
Samsung UE40D5000 LED
Samsung UE40D6500 LED 3D
Samsung UE40EH5000 LED
Samsung UE40ES5500 LED
Samsung UE40ES6300 LED 3D
Samsung UE40ES6300 LED 3D + Console Xbox 360 4 Go
Samsung UE40ES6710 LED 3D
Samsung UE46EH5000 LED
Samsung UE46ES5500 LED
Samsung UE46ES6300 LED 3D
Samsung UE46ES6300 LED 3D + Console Xbox 360 4 Go
Samsung UE46ES6710 LED 3D blanc
Samsung UE46ES8000 LED 3D
Samsung UE55ES6300 LED 3D
Samsung UE55ES6300 LED 3D + Console Xbox 360 4 Go
Samsung UE60ES6100 LED 3D
Samsung ultrabook NP530U3B 13,3" - Aluminium + Microsoft Explorer Touch Mouse - Souris BlueTrack sans fil
Samsung ultrabook NP530U3B 13,3" LED USB 3.0 - Aluminium
Samsung ultrabook NP530U3B 13,3" LED USB 3.0 - Aluminium+ Samsonite Sac pour ordinateur portable 14,1" S Noir
Samsung ultrabook NP530U3B-A02 13,3" LED USB 3.0 + CaseLogic Sacoche double pour ordinateurs 14" & tablettes 10,1" - Grise
Samsung Ultrabook NP530U3C 13,3" HD LED - Série 5 Ultra - Marron
Samsung Ultrabook NP530U3C 13,3" HD LED - Série 5 Ultra - Rose
Samsung Viseur électronique EVF10
Samsung Wave 575
Samsung WB150F Blanc - WiFi
Samsung WB150F Noir - WiFi
Samsung WB690 Noir
Samsung WB700 Noir
Samsung WB850F Noir - WiFi - GPS
Samsung WMN250M accroche murale
Samsung XE700T1A-A02FR 11,6" 64 Go SSD
Samsung YP-F3 bleu 2 Go
Samsung YP-F3 rose 2 Go
Samsung YP-Q3 rose 8 Go
Samsung YP-Q3 rose 8 Go + Casque JVC HA-S155-P rose
Samsung YP-U6 noir 2 Go
Samsung YP-U6 noir 4 Go
Samsung YP-U6 rose 2 Go
Samsung YP-U6 rose 4 Go
Samsung YP-Z3 blanc 4 Go
Samsung YP-Z3 bleu 4 Go
Samsung YP-Z3 rose 4 Go
Samyang 14 mm f/2.8 Aspherical IF ED UMC; Monture Samsung NX
Samyang 35 mm f/1.4 AS UMC; Monture Samsung NX
Samyang Fish-eye 8 mm f/3.5 Aspherical IF MC; Monture Samsung Type NX
Tablette Samsung Galaxy S WiFi 3,6" 8 Go
Tablette Samsung Galaxy S WiFi 3,6" 8 Go + Casque weSC Conga Matte noir
Tablette Samsung Galaxy S WiFi 4,2" 8 Go
Tablette Samsung Galaxy S WiFi 5" 8 Go
T'nB Coque Clip On pour Samsung Galaxy SII - New York
Toner Samsung CLT-C4072S - Cyan
Toner Samsung CLT-C4092S Cyan
Toner Samsung CLT-K4072S - Noir
Toner Samsung CLT-K4092S Noir
Toner Samsung CLT-M4072S - Magenta
Toner Samsung CLT-M4092S Magenta
Toner Samsung CLT-P4092C - Pack de 4 Toners
Toner Samsung CLT-Y4072S - Jaune
Toner Samsung CLT-Y4092S Jaune
Toner Samsung MLT-D1042S - Noir
We Digital by Samsung - Silver We 1 To USB 2.0
We Digital by Samsung - Silver WE 2 To USB 2.0
Xqisit Coque iPlate Glossy pour Samsung Galaxy S3 - Blanche
Xqisit Coque iPlate Style pour Samsung Galaxy S3 - Transparente/Blanche
Xqisit Coque iPlate Style pour Samsung Galaxy S3 - Transparente/Noire
Xqisit Coque Soft Grip pour Samsung Galaxy S3 - Blanche
Xqisit Coque Soft Grip pour Samsung Galaxy S3 - Noire
Xqisit Etui Flipcover pour Samsung Galaxy S3 - Blanc
Xqisit Etui Flipcover pour Samsung Galaxy S3 - Noir

Samsung - Aspirateur robot Navibot SR8845

Samsung - Aspirateur sans sac EcoStyle SC86G0 gris foncé/fuchsia

Samsung - Aspirateur sans sac SC4780 noir

Samsung - Four micro-ondes MW73B - blanc

SAMSUNG - Micro ondes 36 L - Micro ondes 36 L - CP1395ES

SAMSUNG - Micro ondes 42 L - Micro ondes 42 L - CQ1570U

Samsung - Micro-ondes combiné CE117PT-B

SAMSUNG - Micro-ondes Grill simultané GS89F-1SP

Samsung 305U1A 11,6" LED

Samsung 305U1A 11,6" LED + Office Famille et Etudiant 2010 1 poste

Samsung Aspirateur sans sac EcoStyle SC86H0 gris clair/bleu

Samsung B1930HD 18.5" LCD TNT HD

Samsung B5722 Double SIM

Samsung Bac papier supplémentaire ML-S3710A - 520 feuilles

Samsung Batterie ED-BP1310

Samsung batterie IA-BH130LB

Samsung batterie IA-BP420E

Samsung batterie IA-BP85ST

Samsung batterie SLB-10A

Samsung batterie SSB-690 ELS

Samsung BD-E5300

Samsung BD-E5500 3D

Samsung BD-E8300 3D

Samsung C3050 Stratus

Samsung Câble Adaptateur HDTV pour Galaxy Tab 8.9" / 10.1"

Samsung Câble data pour téléphones mobiles Samsung

Samsung Caméra additionnelle de vidéosurveillance SEB-1015RWP EX

Samsung caméra Skype CY-STC1100

Samsung CB20A12

Samsung Ch@t335 - GT-S3350 - Noir

Samsung Chargeur allume-cigares micro-USB

Samsung chargeur de voyage pour SGH-P260 et SGH-G600 - Modèle Noir

Samsung Chargeur secteur de voyage micro-USB

Samsung CLP-325 + Toner Samsung CLT-K4072S Noir

Samsung CLP-325 + Toner Samsung CLT-K4072S Noir

Samsung CLP-325 WiFi

Samsung CLP-325 WiFi + Toner Samsung CLT-K4072S Noir + MCL Samar câble imprimante USB 2.0

Samsung CLP-620ND - Imprimante Ethernet

Samsung CLP-C300A

Samsung CLP-K300A

Samsung CLP-M300A

Samsung CLP-Y300A

Samsung CLX-3185 + Toner Samsung CLT-K4072S Noir

Samsung CLX-3185 + Toner Samsung CLT-K4072S Noir

Samsung CLX-3185 + Toner Samsung CLT-K4072S Noir

Samsung CLX-3185FW WiFi

Samsung CLX-3185FW WiFi + Toner Samsung CLT-K4072S Noir + MCL Samar câble imprimante USB 2.0

Samsung CLX-3185N Ethernet

Samsung CLX-3185W - Imprimante Multifonctions WiFi & Ethernet

Samsung CLX-6220FX - Imprimante Multifonctions Ethernet

Samsung Coque silicone Croisillons pour nexus S

Samsung CY-SMN1000D meuble TV

Samsung Disque Dur interne SSD 128 Go MZ-7PC128D 830 Series

Samsung Disque Dur interne SSD 128 Go MZ-7PC128N 830 Series

Samsung Disque Dur interne SSD 256 Go MZ-7PC256D 830 Series

Samsung Disque Dur interne SSD 256 Go MZ-7PC256N 830 Series

Samsung Disque Dur interne SSD 64 Go MZ-7PC064D 830 Series

Samsung dongle Wi-Fi WIS12ABGNX

Samsung DP7000A3B 23" LED Tactile USB 3.0

Samsung Duo de 2 coques pour Samsung Galaxy II I9100 - 1 Noire + 1 Camel

Samsung Duo de 2 coques pour Samsung Galaxy II I9100 - 1 Noire matelassée + 1 Rose

Samsung DV300F Argent/Rouge - WiFi

Samsung DV300F Noir - WiFi

Samsung E1150 - Silver

Samsung E2550

Samsung EcoBlue SC61E0 bleu azur

Samsung ES30 Noir

Samsung ES30 Noir + Carte SD 2 Go

Samsung Etui coque pour Galaxy Note - Noir

Samsung Etui cuir pour Galaxy S II - Noir

Samsung Etui flap en cuir pour Samsung Galaxy II I9100 - Noir

Samsung Eui cuir pour i9000 Galaxy S

Samsung Flash SEF15A

Samsung Flash SEF20A

Samsung Galaxy Ace s5830 (sous Androïd)

Samsung Galaxy Mini (sous Android)

Samsung Galaxy Note

Samsung Galaxy Note - Blanc

Samsung Galaxy Note - Rose

Samsung Galaxy S2 (I9100G) - Blanc

Samsung Galaxy S2 (I9100G) - Noir

Samsung Galaxy Tab 10,1" TFT Blanc 32 Go + Western Digital My Book Live 1 To Ethernet

Samsung Galaxy Tab 10,1" TFT Blanc 32 Go Wifi

Samsung Galaxy Tab 10,1" TFT Noir 16 Go 3G

Samsung Galaxy Tab 8,9" TFT Blanc 32 Go Wifi

Samsung Galaxy Xcover s5690 (sous Androïd) - Smartphone Samsung Solide certifié IP67

Samsung Galaxy Y Pro B5510 (sous Androïd)

Samsung Galaxy Y Young s5360 (sous Androïd)

Samsung Graveur DVD Externe Wifi - SE-208BW - Noir

Samsung Housse Folio pour Galaxy Tab 10,1"

Samsung Housse Folio pour Galaxy Tab 8,9"

Samsung HT-D330

Samsung HT-D350

Samsung HT-D423

Samsung HT-D4500

Samsung HT-D5000 3D

Samsung HT-E4200 3D

Samsung HT-E4500 3D

Samsung HT-E5200 3D

Samsung HT-ES6200 3D WiFi

Samsung HW-E450

Samsung I9103 Galaxy R (sous Android)

Samsung Kit de connexion USB & SD pour Galaxy Tab 10.1"

Samsung Kit de vidéosurveillance tout-en-un SDE-3003P/EX

Samsung Kit de vidéosurveillance tout-en-un SME-4220

Samsung Kit Etui + Clavier Bluetooth pour Galaxy Tab 10,1" - Brun foncé

Samsung kit HDMI

Samsung kit HDMI

Samsung kit papier 10 x 15 cm

Samsung kit piéton filaire stéréo Jack 3,5 mm

Samsung LE40D550

Samsung Lot de 2 protections d'écran pour Galaxy S2 - Transparente/Miroir

Samsung Lot de 2 Protections d'écran pour i9000 Galaxy S

Samsung Lunettes 3D SSG-3050GB

SAMSUNG ME106V-SX

Samsung ME82V Micro-onde monofonction

SAMSUNG ME82V-SX

SAMSUNG Micro ondes MW87Y

SAMSUNG Micro-ondes combiné CE117APT B

SAMSUNG Micro-ondes combiné CE137NEMX

SAMSUNG Micro-ondes FW113T002

Samsung ML-1630/SCX4500

Samsung ML-2010D3

Samsung ML-2165 - Imprimante Monochrome

Samsung ML-2165W - Imprimante WiFi

Samsung ML-2545 - Imprimante Monochrome

Samsung ML-2955DW - Imprimante Ethernet & WiFi

Samsung ML-2955ND - Imprimante Ethernet

Samsung ML-3310D - Imprimante Monochrome

Samsung ML-3710DW - Imprimante Ethernet & WiFi

Samsung MLT-D1052S

Samsung MLT-D1082S

Samsung MLT-D1092S

Samsung MM-D430D

Samsung MV800 Noir

Samsung MV800 Noir + Etui Zadig & Voltaire Noir

Samsung NP300E7A-S03FR 17,3" LED

Samsung NP700Z5A-S02FR 15,6" LED

Samsung NX 60 mm f/2.8 ED OIS SSA Macro i-Function; dédié Boîtiers Hybrides

Samsung NX 85 mm f/1.4 ED SSA i-Function; dédié Boîtiers Hybrides

Samsung NX Pancake 16 mm f/2.4 i-Function; dédié Boîtiers Hybrides

Samsung NX Pancake 20 mm f/2.8 i-Function; dédié Boîtiers Hybrides

Samsung NX Pancake 30 mm f/2.0; dédié Boîtiers Hybrides

Samsung NX200 Noir + Obj. Samsung NX 18 - 55 mm f/3.5 - 5.6 OIS + Flash SEF-8A NG8

Samsung NX200 Noir + Obj. Samsung NX 20 - 50 mm f/3.5 - 5.6 ED i-Function + Flash SEF-8A NG8

Samsung Oreillette Bluetooth HM1200

Samsung Pack d'accessoire pour Galaxy S II I9100

Samsung Pack étui cuir + chargeur + protection d'écran pour Galaxy S

Samsung PL170 Noir

Samsung PL210 Noir

Samsung PL210 Noir + Carte mémoire Lexar MicroSDHC 8 Go

Samsung PL90 Noir et Rouge

Samsung Player mini 2 c3310 - Gris Métal

Samsung Player Mini C3300 - Noir

Samsung Port parallèle ML-PAR100 pour imprimante

Samsung PS43D450

Samsung PS43E450

Samsung PS43E490 3D

Samsung PS51E450

Samsung PS51E490 3D

Samsung PS59D530

Samsung Q3 rose 4 Go

Samsung RC530-S03FR 15,6" LED

Samsung RC730-S06FR 17,3" LED

Samsung RF712 E7P-C7261 17,3" LED 3D Blu-Ray USB 3.0 + lunettes

Samsung S22A300B 21,5" TFT

Samsung S22B350H 21,5" LED

Samsung S23A750D 23" LED 3D

Samsung S23B350H 23" LED

Samsung S24B300HL Moniteur 23,6" LED

Samsung S27B350H 27" LED

Samsung SC4340 noir ébène

Samsung SC4790 - Aspirateur sans sac - traineau - rouge

Samsung SCX-3405 - Imprimante Multifonctions

Samsung SCX-3405F - Imprimante Multifonctions

Samsung SCX-3405FW - Imprimante Multifonctions WiFi & Ethernet

Samsung SCX-3405W - Imprimante Multifonctions WiFi

Samsung SCX-4200A

Samsung SCX-4729FD - Imprimante Multifonctions Ethernet

Samsung SCX-4729FW - Imprimante Multifonctions Ethernet & WiFi

Samsung SCX-5737FW - Imprimante Multifonctions Ethernet

Samsung SE-084D graveur DVD externe slim USB 2.0

Samsung SE208AB Graveur DVD externe USB 2.0

Samsung SLB07A pour ST50

Samsung SLB-11A pour Samsung WB1000

Samsung ST65 Noir

Samsung ST65 Rouge

Samsung station d'accueil

Samsung station d'accueil HD2

Samsung Station d'accueil pour tablette Galaxy Tab 10,1"

Samsung Station d'accueil pour tablette Galaxy Tab 8,9"

Samsung station d'accueil SSD-760 E2/EUR

Samsung SyncMaster C23A550U 23" LED

Samsung SyncMaster C23A750X 23" LED

Samsung Syncmaster S23A700D 23" LED 3D

Samsung SyncMaster S24A350H 24" LED

Samsung Syncmaster T22A550 21,5" LED Tuner TNT HD

Samsung Système de vidéosurveillance Baby Monitor SEW-3022WP/ EX

Samsung T22A350 21,5" LED Tuner TNT

Samsung Toner MLT-D101S pour imprimantes Samsung SCX-3405 & ML-2165 - Noir

Samsung UE19D4010 LED

Samsung UE19ES4000 LED

Samsung UE22ES5000 LED

Samsung UE22ES5410 LED

Samsung UE26EH4000 LED

Samsung UE26EH4500 LED

Samsung UE32D5000 LED

Samsung UE32EH4000 LED

Samsung UE32EH5000 LED

Samsung UE32ES5500 LED

Samsung UE32ES6300 LED 3D

Samsung UE32ES6710 LED 3D blanc

Samsung UE40D5000 LED

Samsung UE40D5710 LED

Samsung UE40D6500 LED 3D

Samsung UE40EH5000 LED

Samsung UE40ES5500 LED

Samsung UE40ES6300 LED 3D

Samsung UE40ES6710 LED 3D

Samsung UE46EH5000 LED

Samsung UE46ES5500 LED

Samsung UE46ES6300 LED 3D

Samsung UE46ES6710 LED 3D blanc

Samsung UE55ES6300 LED 3D

Samsung ultrabook NP530U3B-A02 13,3" + Microsoft Explorer Touch Mouse - Souris BlueTrack sans fil

Samsung ultrabook NP530U3B-A02 13,3" LED USB 3.0

Samsung ultrabook NP530U3B-A02 13,3" LED USB 3.0 + CaseLogic Sacoche double pour ordinateurs 14" & tablettes 10,1" - Grise

Samsung ultrabook NP530U3B-A02 13,3" LED USB 3.0 + Samsonite Sac pour ordinateur portable 14,1" S Noir

Samsung ultrabook NP530U4B-S01FR 14" LED + Microsoft Explorer Touch Mouse - Souris BlueTrack sans fil

Samsung ultrabook NP530U4B-S01FR 14" LED USB 3.0

Samsung ultrabook NP530U4B-S01FR 14" LED USB 3.0 + CaseLogic Sacoche double pour ordinateurs 14" & tablettes 10,1" - Grise

Samsung ultrabook NP530U4B-S01FR 14" LED USB 3.0 + Samsonite Sac pour ordinateur portable 14,1" S Noir

Samsung Viseur électronique EVF10

Samsung WB150F Blanc - WiFi

Samsung WB150F Noir - WiFi

Samsung WB700 Noir

Samsung WB750 Noir

Samsung WIS09ABGN LinkStick WLAN-Adapter

Samsung WMN250M accroche murale

Samsung YP-F3 bleu 2 Go

Samsung YP-F3 noir 2 Go

Samsung YP-F3 rose 2 Go

Samsung YP-Q3 rose 8 Go

Samsung YP-Q3 rose 8 Go + Casque JVC HA-S155-P rose

Samsung YP-U6 noir 2 Go

Samsung YP-U6 noir 4 Go

Samsung YP-U6 rose 2 Go

Samsung YP-U6 rose 4 Go

Samsung YP-Z3 blanc 4 Go

Samsung YP-Z3 bleu 4 Go

Samsung YP-Z3 rose 4 Go

Skype™ pour téléviseurs Samsung Présentation de Skype 2 Pour vous connecter avec un compte existant 3 Pour vous connecter avec la Reconnaissance faciale 4 Reconnaissance faciale 5 Création d'un compte 6 Affichage 7 Ajout d'un contact 8 Pour appeler un contact 9 Réception 10 Histoire 11 Options Skype 12 Cmde vocale et par mouvement 13 * Les images et les couleurs peuvent être modifiées Rev 1.0 sans préavis.2 Présentation de Skype Passez des appels audio et vidéo avec Skype sur votre téléviseur. O C'est possible grâce à SMART HUB, qui vous permet de disposer, sur votre téléviseur, de fonctions ludiques et utiles en provenance directe du Web. ✎ REMARQUE x Branchez directement votre webcam SAMSUNG sur le téléviseur, en ne passant pas par un concentrateur USB. x Si la webcam ne fonctionne pas correctement, éteignez et rallumez le téléviseur, et relancez Skype. x Skype est désactivé lorsque le téléviseur est éteint. x La qualité de la voix peut être diminuée dans un environnement bruyant. x L'utilisation d'un réseau sans fil peut dégrader la qualité de l'appel. x L'utilisation du logiciel Skype est soumis au Contrat de Licence Utilisateur Final (CLUF) de Skype (skype.com/legal/eula), aux conditions de service de Skype (skype.com/legal/tos) et à la politique de confidentialité de Skype (skype.com/legal/privacy/general). x En cas de suppression de Skype, les informations enregistrées (Historique et Options) sont supprimées. x Pour obtenir de l'aide sur l'utilisation de Skype, visitez skype.com x Vous devez configurer votre réseau avant d'utiliser Skype sur votre téléviseur. Reportez-vous aux instructions du présent manuel. x La sonnerie retentit lorsqu'une personne vous appelle pendant que vous regardez la télévision ou utilisez une application Skype. x Pour utiliser Skype, vous avez besoin de la caméra TV. Achetez la caméra TV de SAMSUNG si votre téléviseur n'en dispose pas d'une intégrée. x Les caméras TV commercialisées en 2010 et les téléviseurs SAMSUNG commercialisés en 2012 ne sont pas compatibles. x Seule la version 4.2 ou supérieure de Skype est prise en charge par les ordinateurs tournant sous Windows. x Seule la version 5.0 ou supérieure de Skype est prise en charge par les ordinateurs tournant sous Macintosh. x Non pris en charge par les ordinateurs tournant sous Linux.3 Bienvenue dans Skype ! Ouv sess Créer compte Bienvenue dans Skype ! Nom Skype Mot de passe Se connecter au démarrage de Skype Me connecter quand la TV s'allume Ouv sess Pour vous connecter avec un compte existant 2 Renseignez le champ Nom Skype et Mot de passe. Utilisez les touches du clavier pour renseigner les champs Nom Skype et Mot de passe. 3 Appuyez sur Ouv sess. Entrez votre pseudo Skype. Nom Skype Supp. tt Supprimer Espace Numeric Paramètres OK Annuler 17/32 1 Appuyez sur Ouv sess. Lorsque vous lancez Skype pour la première fois sur votre téléviseur, renseignez les champs Nom Skype et Mot de passe ou sélectionnez l'option Créer compte. Si la connexion n'est pas établie, vérifiez la connexion réseau. Mode Reconnaissance faciale App. sur [Enter] App. sur [Enter]4 R Retour Bienvenue dans Skype ! Nom Skype Mot de passe Se connecter au démarrage de Skype Me connecter quand la TV s'allume Ouv sess Mode Reconnaissance faciale App. sur [Enter] App. sur [Enter] Pour vous connecter avec la Reconnaissance faciale x Vous pouvez ouvrir une session dans Skype en utilisant la Reconnaissance faciale sur votre téléviseur prenant en charge l'Interaction INTELLIGENTE (Cmde vocale et par mouvement). [ Pour que la fonction Reconnaissance faciale soit opérationnelle, une image miniature de votre visage doit être enregistrée dans votre téléviseur à des fins de connexion. [ Se connecter à Skype à l'aide de la Reconnaissance faciale peut être moins sécurisé qu'utiliser un identifiant et un mot de passe. Bienvenue dans Skype ! Vous pouvez vous connecter à l'aide de la reconnaissance faciale. Placez votre visage devant la TV au niveau de la caméra. Mode mot de passe Arrêter R Retour 1 Appuyez sur Mode Reconnaissance faciale. 2 Le téléviseur lance la Reconnaissance faciale. • Tournez votre tête vers le téléviseur en tenant votre visage au niveau de la caméra. Le téléviseur reconnaîtra votre visage automatiquement.5 Reconnaissance faciale Reconnaissance faciale Vérifiez que votre visage est au centre de l'écran. Patientez jusqu'à ce que le rectangle au centre de l'écran devienne vert. Arrêter R Retour 2 L'écran Reconnaissance faciale s'affiche. • Veillez à ce que votre visage soit au centre du cercle. • Attendez jusqu'à ce que le rectangle au centre de l'écran devienne vert. Skype Credit : 0 Options Skype Paramètres Chat Histoire Appel. tél. Contacts Gestionnaire compte Modif. MDP Supprimer le visage reconnu Reconnaissance faciale R Retour 1 Sélectionnez Paramètres → Gestionnaire compte → Reconnaissance faciale.6 Bienvenue dans Skype ! Ouv sess Créer compte Création d'un compte 1 Appuyez sur Créer compte. Créer un compte Skype Créer un nom Skype Mot de passe Utilisez ce pseudo pour vous connecter à Skype. Vous pourrez communiquer votre pseudo Skype à vos amis de façon à ce qu'ils puissent vous ajouter à leurs contacts Skype. Vous en aurez besoin pour vous connecter à Skype ou pour gérer votre compte en ligne. Retour 2 Renseignez le champ Créer un nom Skype et Mot de passe. 3 Entrez votre Nom complet et E-mail. Créer un compte Skype Nom complet E-mail Le nom que vous entrez ici est celui qui apparaîtra dans la liste de contacts de vos contacts Skype. Nous en aurons besoin si vous rencontrez des problèmes pour accéder à votre compte ou si vous oubliez votre mot de passe. Retour Suivant Créer un compte Skype Contrat de licence AFFICHER LES CONDITIONS D'UTILISATION AFF. ACCORD DE CONFIDENTIALITE Aucun appel d'urgence. Skype ne remplace pas votre téléphone ordinaire et ne peut pas être utilisé pour les appels d'urgence. Oui. J'ai lu et j'accepte cond. d'utili. ci-après. Retour Accepter R Retour 4 Sélectionnez Accepter. Sélectionnez l'une des conditions pour consulter des informations supplémentaires.7 Appel visio Appel vocal 1/1 Pages Chat Contacts a Déconn. { Ajouter un contact R Retour Chat Histoire Appel. tél. Paramètres Skype Credit : 0 Echo / Sound Test Service Affichage Cette zone affiche votre nom Skype, votre état en ligne, votre message d'humeur ainsi que votre image de profil. Votre liste de contacts. Vous pouvez sélectionner le mode Appel visio, Appel vocal ou Chat. Crédit Skype Ce menu permet de sélectionner les options Contacts, Chat, Histoire, Appel. tél. et Paramètres. Dans l'option de menu, appuyez sur ENTERE et choisissez l'option appropriée. a Déconn. : Sélectionnez cette option pour vous déconnecter. { Ajouter un contact : Ajouter un contact Skype ou un numéro de téléphone. R Retour / Fin appel : Permet de revenir au menu précédent. / Ferme l'application Skype une fois l'appel terminé.8 1/1 Pages Contacts Chat Histoire Appel. tél. Paramètres Skype Credit : 0 Echo / Sound Test Service Chat Sélectionner type de contact Ajouter un contact Ajouter contact Skype Ajouter numéro de téléphone R Retour Appel visio Appel vocal 1/1 Pages Contacts Chat a Déconn. { Ajouter un contact R Retour Chat Histoire Appel. tél. Paramètres Skype Credit : 0 Echo / Sound Test Service Ajout d'un contact 1 { Appuyez sur Ajouter un contact. 2 Sélectionnez un contact. • Ajouter contact Skype : Entrez le nom Skype de la personne, son nom complet ou son adresse e-mail. • Ajouter numéro de téléphone : Entrez le nom et le numéro de téléphone.9 Appel visio Appel vocal 1/1 Pages Contacts Chat Chat Histoire Appel. tél. Paramètres Skype Credit : 0 Echo / Sound Test Service Pour appeler un contact 1 Appuyez sur Appel visio ou Appel vocal. Appel... Annuler samsung_skype1 1/1 Pages Chat Contacts Chat Histoire Appel. tél. Paramètres Skype Credit : 0 Echo / Sound Test Service • L'illustration du manuel peut différer en partie de la forme réelle. Appel visio Appel vocal Durée d'appel 00:03:10 Fin appel Lancer vidéo Vol. micro En attente T Outils } Liste contacts R Retour Durée d'appel 00:00:42 Fin appel Arrêter vidéo Vol. micro En attente T Outils b Plein écran } Liste contacts R Retour10 Durée d'appel 00:03:10 Fin appel Start Video Vol. micro En attente T Outils } Liste contacts R Retour Durée d'appel 00:00:42 Fin appel Arrêter vidéo Vol. micro En attente T Outils b Plein écran } Liste contacts R Retour • Si vous recevez un appel de conférence, l'option Vidéo est désactivée. Réception Pendant un appel vidéo ou visio. „ Fin appel: Raccrocher. „ Arrêter vidéo: Eteint la caméra. „ Vol. micro: Permet de régler le volume du micro. „ En attente / Reprendre: Suspend/reprend d'appel. ✎ Un contact Skype verra s'afficher un message lorsque l'appel est mis en attente. „ Lancer vidéo: Passe à un appel vidéo. x B (Plein écran): Permet de passer en mode plein écran. x D (Liste contacts): Affiche la liste des contacts. samsung_skype1 Appel... Vidéo Voix Refuser Appel visio Appel vocal Refuse un appel.11 Afficher profil Envoi msg vocal Aj. ds contacts Bloquer Suppr. entrée Déconn. R Retour Appel visio Pages Chat Contacts Histoire Appel. tél. Paramètres Skype Credit : 0 Histoire Chaque appel est accompagné d'une icône. Icônes Signification Appel entrant Appel sortant Appel manqué Message vocal entrant Message vocal manqué Conférence audio entrante Conférence audio manquée • Afficher profil : Affichez le profil du contact sélectionné. • Envoi msg vocal : Envoyez un message vocal au contact sélectionné. • Aj. ds contacts: Ajoutez cette personne comme contact. Cette option est disponible lorsque cette personne n'est pas enregistrée dans votre liste de contacts. • Bloquer : Empêchez cette personne de vous contacter. • Suppr. entrée : Supprimez cet élément de votre historique. • Déconn. : Permet de se déconnecter. ✎ L'historique peut être limité par la capacité de mémoire. ✎ C'est l'heure réglée sur le téléviseur qui est enregistrée dans l'historique. Affiche l'historique des appels passés, du plus récent (en haut) au plus ancien (en bas).12 Options Skype a Sign Out R Return Etat Modifier profil Changer photo Gestionnaire compte Paramètres Chat Histoire Appel. tél. Contacts Skype Credit : 0 Paramètres généraux Options Skype R Retour Paramètres vidéo Param. confid. Utilisateurs bloqués Transfert d'appel Messagerie vocale A propos de Skype Démar. auto qd allumage de TV : Afficher une notification en cas de connexion : Arrêt Arrêt Options Skype 1 Sélectionnez Paramètres → Options Skype. 2 Modifiez la ou les options de votre choix. • Paramètres généraux : Indiquez si vous voulez que Skype se lance automatiquement lorsque vous allumez le téléviseur. • Paramètres vidéo : Réglez les paramètres de confidentialité de la vidéo. Choisissez de qui vous acceptez des appels vidéo en sélectionnant Toute personne, Uniquement personnes de la liste Contacts ou Personne. • Param. confid.: Choisissez de qui vous acceptez des appels. Sélectionnez Autoriser tout le monde à me contacter ou Pers. ds liste contacts peuvent me contac.. • Utilisateurs bloqués: Si vous ne voulez pas que quelqu'un vous contacte, bloquez-le en entrant son nom Skype ou son numéro de téléphone. Toutes les personnes bloquées apparaissent dans cette fenêtre. Vous pouvez aussi bloquer quelqu'un à partir de la liste des contacts et de l'historique en sélectionnant le contact et en appuyant sur TOOLST. • Transfert d'appel: Pour renvoyer des appels de votre compte Skype lorsque vous n'êtes pas sur Skype, ajoutez les numéros de téléphone vers lesquels les appels doivent être renvoyés. Sélectionnez le pays et entrez le numéro avec l'indicatif régional. Entrez le délai après lequel l'appel doit être renvoyé. Vous devez acheter du crédit Skype sur skype.com pour utiliser cette fonction. • Messagerie vocale: Cette fonction permet aux personnes qui vous appellent de laisser des messages vocaux si vous êtes absent. Vous pouvez écouter les messages à partir de n'importe quelle connexion Skype. Pour plus d'informations ou pour recevoir le message vocal, sur skype.com, cliquez sur Account. • A propos de Skype: Cette option permet d'afficher les informations de copyright de Skype.13 Smart TV Hi TV Hello world! Echo / Sound Test Service Dites le nom de la personne que vous voulez appeler. Appel visio Appel vocal 1/1 Pages Chat Contacts a Sign Out { Add a Contact R Chat Histoire Appel. tél. Paramètres Skype Credit : 0 Vidéo Voix Annuler Smart TV Hi TV Hello world! Echo / Sound Test Service Appel visio Appel vocal 1/1 Pages Chat Contacts a Déconn. { Ajouter un contact R Return Chat Histoire Appel. tél. Paramètres Skype Credit : 0 Annuler Sonnerie… Annuler young470 Hello world! Echo / Sound Test Service 1/1 Pages Chat Contacts Chat Histoire Appel. tél. Paramètres Skype Credit : 0 Cmde vocale et par mouvement 1 Dites « Hi TV(Mots déclencheurs) » et prononcez le nom de la personne que vous voulez appeler. 3 Dites Appel visio ou Appel vocal pour passer l'appel. 2 Dites l'un des deux. x Vous pouvez appeler ou évoluer dans Skype grâce à Cmde vocale et par mouvement sur le téléviseur, prenant en charge l'Interaction INTELLIGENTE (Cmde vocale et par mouvement). x Vous ne pouvez pas utiliser la Commande vocale pendant un appel. x Commande vocale peut être affectée par les noms difficiles à prononcer, comme ceux contenant des caractères spéciaux ou des lettres de l'alphabet et des nombres. Vous pouvez le modifier en utilisant Renommer. x Pour plus d'informations sur Smart Interaction, reportez-vous à la section "Smart Interaction" dans le manuel électronique ou dans le manuel d'utilisation. E-MANUAL Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model______________ Serial No.______________Channel Menu • Connecting the TV 1 • Using the INFO button (Now & Next guide) 24 • Using the Channel Menu 26 • Memorizing Channels 66 • Other Features 81 Basic Feature • Changing the Preset Picture Mode 97 • Adjusting Picture Settings 102 • Changing the Picture Size 107 • Changing the Picture Options 121 • Using the TV with Your PC 139 • Changing the Preset Sound Mode 143 • Adjusting Sound Settings 145 Preference Features • Connecting to the Network 161 • Setting up a Wired Network 178 • Setting up the Wireless Network 191 • Managing the Network Connected Devices 218 • Setting the Time 231 • Blocking Programmes 248 • Economical Solutions 253 • Picture In Picture (PIP) 257 • Other Features 262 • Support Menu 291 ContentsAdvanced Features • Using the 3D function 317 • Smart Hub 332 • Customizing the Home Screen 358 • Using Samsung Apps 388 • Search 399 • Your Video 407 • Family Story 424 • Fitness 478 • Kids 489 • Web Browser 505 • Skype 535 • AllShare Play 539 • Using the AllShare Play 562 • My list (In AllShare Play) 566 • Videos (In AllShare Play) 585 • Photos (In AllShare Play) 604 • Music (In AllShare Play) 621 • Recorded TV (In AllShare Play) 629 • Timeshift 643 • Using the DLNA Function 653 • Anynet+ (HDMI-CEC) 664Other Information • Troubleshooting 682 • Picture Quality (Troubleshooting) 683 • Sound Quality (Troubleshooting) 691 • No Picture, No Video (Troubleshooting) 696 • RF (Cable / Aerial) Connection (Troubleshooting) 700 • PC Connection (Troubleshooting) 703 • Network Connection (Troubleshooting) 704 • Recording / Timeshift (Troubleshooting) 705 • Others (Troubleshooting) 714 • Anynet+ (HDMI-CEC) (Troubleshooting) 729 • AllShare Play (Troubleshooting) 737 • Smart Hub (Troubleshooting) 738 • Web Browser (Troubleshooting) 740 • Supported Subtitle and AllShare Play file formats 748 • Data Service 757 • HbbTV 765 • Connecting to a TV Viewing Card slot 769 • Teletext Feature 779 • Anti-theft Kensington Lock 786 • Licence 791 Connecting the TV Connecting to an Aerial or Satellite The displayed image may differ depending on the model. or TV rear panel Channel Menuor The displayed image may differ depending on the model. TV rear panel Connecting to an AV Device Using a HDMI (up to 1080p) The displayed image may differ depending on the model. TV rear panel The displayed image may differ depending on the model. TV side panel Using an HDMI cable (up to 1080p) N HDMI IN 1(DVI), HDMI IN 2(ARC), HDMI IN 3 ● For better picture and audio quality, connect to a digital device using an HDMI cable. ● An HDMI cable supports digital video and audio signals, and does not require an audio cable. – To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables. ● The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade. ● for LED 6500 Series and above Be sure to use an HDMI cable with a thickness of 14 mm or less. ● Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur. ● A basic high-speed HDMI cable or one with Ethernet is recommended. This product does not support the Ethernet function via HDMI. ● This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note that the ARC function is supported by the HDMI IN 2(ARC) port only. ● The ARC function allows digital audio to output via the HDMI IN 2(ARC) port. It can be enabled only when the TV is connected with an audio receiver that supports the ARC function. Using a Scart Cable The displayed image may differ depending on the model. TV rear panel The displayed image may differ depending on the model. TV side panel Using a Component (up to 1080i) The displayed image may differ depending on the model. TV rear panel The displayed image may differ depending on the model. TV rear panel Using a Component (up to 1080i) or an Audio/Video (480i only) and a Scart Cable N In Ext. mode, DTV Out supports MPEG SD Video and Audio only.N When connecting to AV IN or COMPONENT/AV IN connect the AV connector (yellow) to the TV jack (Green). (Depending on the model) N To obtain the better picture quality, the Component connection or Scart connection are recommended over the A/V connection. Connecting to an Audio device Using an Optical (Digital) Connection The displayed image may differ depending on the model. TV rear panel The displayed image may differ depending on the model. TV side panel DIGITAL AUDIO OUT (OPTICAL)● When you connect a Digital Audio System to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system. ● Use the System speakers for audio. ● 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH. ● When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Bluray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre. Using a Headphone Connection for LED TV The displayed image may differ depending on the model. TV rear panel The displayed image may differ depending on the model. TV rear panel Headphones H You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled. ● Sound function may be restricted when connecting headphones to the TV. ● Headphone volume and TV volume are adjusted separately. ● The headphones jack supports only the 3 conductor tip-ring-sleeve (TRS) type. Connecting to a PC Using an HDMI/DVI Cable The displayed image may differ depending on the model. TV rear panel The displayed image may differ depending on the model. TV side panel Using an HDMI cable or an HDMI to DVI cable Connecting through the HDMI cable may not be supported depending on the PC. Optimal resolution is 1920 X 1080 @ 60 Hz. N For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. N The interlace mode is not supported. N The set might operate abnormally if a non-standard video format is selected. N Separate and Composite modes are supported. SOG (Sync On Green) is not supported. N PC (D-Sub) input is not supported.Using the INFO button (Now & Next guide) The display identifies the current channel and the status of certain audiovideo settings. The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time. ● Scroll l, r to view information for a desired programme while watching the current channel.● Scroll u, d to view information for other channels. If you want to move to the currently selected channel, select E using your remote.Using the Channel Menu Press the ™ button to select the menu you want to use. Each screen will be displayed. Guide ™ → Guide The EPG (Electronic Programme Guide) information is provided by broadcasters. Using programme schedules provided by broadcasters, you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time. Programme entries may appear blank or out of date depending on a channel status. Using Channel View ● a (Sche. Mgr): Displays the Schedule Manager.● b (-24 Hours): Viewing the list of programmes to be broadcasted before 24 hours. ● { (+24 Hours): Viewing the list of programmes to be broadcasted after 24 hours. ● } (Ch. Mode): Select the type of channels you want to display on the Channel View window. ● ` Information: Displays details of the selected programme.● k Page: Move to next or previous page. ● E Watch / Schedule: When selecting the current programme, you can watch the selected programme. / When selecting the future programme, you can reserve to watch the selected programme. Channel ™ → Channel Using this function, you can delete channels, set favourite channels and edit the channel name for analogue broadcasts. N The available items may differ depending on the selected aerial source. ● All Shows all channels. ● TV Shows TV channels. ● RadioShows radio channels. ● Data/Other Shows data channels and other channels. ● Analogue Shows analogue channels. ● Favourites 1 - Favourites 5 Shows all favourite channels, in up to five groups. Each group has separate channels. N The TV displays favourites only if you have added favourites using Edit Favourites in the Tools menu. N If the highlight located in the Favourites 1 – Favourites 5 category, you can change the name of category by selecting b using your remote. ● Recently Viewed Shows the most recently viewed channels. ● Most ViewedShows the most frequently viewed channels. Using the coloured and function buttons with Channel ● a Air / Cable / Satellite for PE570, PE6500, UE5700, UE6300 Series and above Select the desired aerial source. The option may differ depending on country. N Appears only if your TV stored both Air and Cable. ● b Delete Delete the selected channel(s). ● ` Information Displays details of the selected channel. ● k Page Scrolls the channel list to the next or previous page. ● E Select / Deselect Selects or deselects a channel. ● T ToolsDisplays the option menu. ● R Return Return to the previous menu. Using the Tools menu with the Channel ● Edit Favourites Lets you assign channels you watch frequently to a favourite group and remove channels from a favourite group. You access Edit Favourites on the Tools menu.● Lock / Unlock Lock a channel so that the channel cannot be selected and viewed. N This function is available only when the Channel Lock is set to On. ● Rename channel (Appears only if you have selected an analogue channel.) Lets you assign a name of up to five characters to an analogue channel. For example, Food, Golf, etc. This makes it easier to find and select the channel. ● Edit Channel Number Edit the channel number by select the numbers. N This function may not be supported depending on the region. ● Sorting (digital channels only) Change the list ordered by name or number. ● Channel Info Displays information of channel signal. The item may differ depending on channel. ● Search (when the aerial was set to Satellite) Channel scan is started. ● Delete Delete a channel to display the channels you want. ● Select All / Deselect All Select all channels in the list. / Deselect all channels you selected.To delete a channel from a Category list on the Channel screen, follow these steps: 1. If you want to delete a channel, select a category of the channel. 2. Select a channel in the category list. A c mark appears to the left of the channel. N You can select more than one channel. N If you select the selected channel again, a c mark disappears. 3. Open the Tools menu using your remote. 4. Select Delete. The message Delete the selected channels? appears. Select OK. N You can delete the selected channel immediately by selecting b using your remote. N When you delete a channel in the Recently Viewed or Most Viewedcategory, the channel will disappear from the category list. But, the channel is not deleted. To set channels as favourites, follow these steps: 1. Select the All category. 2. Select a channel. A c mark appears to the left of the channel. N You can select more than one channel.N If you select the selected channel again, a c mark disappears. 3. Open the Tools menu using your remote. 4. Select the Edit Favourites. The Edit Favourites screen appears. 5. Select a using your remote. The selected channel will be moved to the favourite group. N Also, you can select a channel in the Edit Favourites screen.N You can add a favourite channel to any one of the groups. To change favourites group, select } using your remote. Each time you select }, a favourites group will be changed. 6. When done, select OK. The channel is made as a favourite and is assigned to the favourite group you selected. N The TV displays the “ ” symbol next to the channel, indicating it is a favourite. Using the coloured and function buttons with Edit Favourites ● On the Edit Favourites screen, you can use these functions buttons: – a Add Add selected channels to the favourites group. – } Change Fav. Change the favourites group. Each time you select } using your remote, the favourites group changes. – Ÿ Go To You can enter a channel number immediately using your remote. – R Return Return to the previous menu. ● When you highlight a favourite channel in a favourites group on the Edit Favourites screen, you can use these options: – a Delete Delete the selected channel. – b Change order Change the favourite group list order. – { Copy Copy a selected channel to other favourites groups. – } Change Fav. Change the favourites group. Each time you select } using your remote, the favourites group changes. – Ÿ Go To You can enter a channel number immediately using your remote. – R Return Return to the previous menu. To remove a channel from a favourites group, follow these steps:1. Select the favourite’s group category. 2. Select a channel in the favourites group. A c mark appears to the left of the channel. N You can select more than one channel. N If you select the selected channel again, a c mark disappears. 3. Open the Tools menu using your remote. 4. Select the Delete. The message Do you want to delete the selected item(s)? appears. 5. Select OK. The message Deleted the selected item(s). appears. N You can delete the selected channel from the list of favourites group immediately by selecting b using your remote. Display Icons Used in the Channel screens : An analogue channel.c: A channel selected. : A favourite channel. : A locked channel. Schedule Manager ™ → Schedule Manager Using this function, you can set the TV to display a desired channel automatically on a day and at a time of your choice. N You must set the current time first using the Time → Clock function in the System menu to use this function. To use Schedule Viewing, follow these steps: 1. On the Schedule Manager screen, select a using your remote. 2. A pop up screen will appear. Select Schedule Viewing. 3. Set Aerial, Channel, Repeat, and Start Time. ● AerialSelect the desired aerial source. ● Channel Select Channel to view the channel numbers. Select the desired channel. N You can only select memorised channels. N You can also enter the channel number directly using the number buttons on the remote. ● Repeat Select Once, Manual, Sat~Sun, Mon~Fri or Everyday. If you select Manual, you can set the day you want. N The c mark indicates a day you’ ve selected. Date: You can set a desired date. N The Date is available only when you select Once in Repeat. ● Start Time You can set the start time you want. 3. When done, select the OK, The selected channel is scheduled for viewing. N On the Schedule Manager screen, you can view a list of Schedule Viewing. N If you select Information function using your remote after highlight an item, the Information screen appears. On the Information screen, you can change or cancel the Schedule Viewing.Cancel schedule: Cancel the Schedule Viewing. Edit Schedule: Change the Schedule Viewing. Return: Return to the previous screen. To delete an item in a list of scheduled, follow these steps: 1. On the Schedule Manager screen, highlight an item you want to delete.2. Open the Tools menu using your remote. 3. Select the Cancel schedule. The Cancel selected list(s)? message appears. 4. Select Yes. The selected schedule is cancelled. To use the Schedule Recording, follow these steps: for LED 4500, 5400 Series : This function is not supported. (Digital channels only) Allows you to make a reservation to record a programme scheduled for broadcast. Set the current time first to use this function. 1. Select Schedule Manager. The Schedule Manager screen will be displayed. 2. Select a using your remote. A pop up screen will appear. 3. Select the Schedule Recording. N We recommend using a USB HDD with at least 5,400 rpm, but a USB HDD of RAID type is not supported. N More than 3TB USB HDD is not supported. N A USB storage device cannot record until it completes the Device Performance Test.N USB memory stick is not compatible. 4. Set the Aerial, Channel, Repeat, Date, Start / End Time. N If you want to play a recorded programme, refer to Recorded TV in the e-Manual. Channel List Using this function, you can view the channel list, programme information, favourite channel, and manage of schedule viewing. 1. Press the CH LIST button. The Channel List screen is displayed immediately. 2. Change a channel or channel list mode. Using the coloured and function buttons with the Channel List N If you press the INFO button, the TV displays details of the selected programme. ● a Aerial Select the desired aerial source. The option may differ depending on country. ● { Programme View / Channel View Displays the programme when digital channel is selected. Returns to the channel view. ● lr Ch. Mode / Channel Move to the type of channels you want to display on the Channel List screen. / On Programme View screen, change a channel. ● E Watch / Information Watches the channel you select. / Displays details of the selected programme. ● k Page Move to next or previous page. Using the Schedule Viewing in Channel ListYou can use Schedule Viewing in Channel List to schedule a digital channel programme for viewing. 1. Press the CH LIST button. The Channel List screen appears. 2. Select a desired digital channel. 3. Select { using your remote. The TV displays the programme list of the selected channel. 4. Select a desired programme in the programme view, and then select Information using your remote. 5. On the Information screen, select Schedule Viewing. The selected programme is scheduled. N If you want to cancel the Schedule Viewing, follow Steps 1 through 4, and then select Cancel schedule. Channel Status Display Icons : An analogue channel. : A reserved programme.: A reserved recording programme. : A locked channel.Memorizing Channels Aerial Menu → Channel → Aerial Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV. N The option may differ depending on country. Country Menu → Channel → CountrySelect your country so that the TV can correctly auto-tune the broadcasting channels. N The PIN input screen appears. Enter your 4 digit PIN number. ● Digital Channel: Change the country for digital channels. ● Analogue Channel: Change the country for analogue channels. Auto TuningMenu → Channel → Auto Tuning Scans for a channel automatically and stores in the TV. N Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the Channel Lock function, the PIN input window appears. ● Auto Tuning: Scans for channels automatically and stores them in the TV’s memory. ● Cable Search Option (when the aerial was set to Cable) (Depending on the country) Sets additional search options such as the frequency and symbol rate for a cable network search. When Aerial Source is set to Air or Cable ● Digital & Analogue / Digital / Analogue: Select the channel source to memorise. When selecting Cable → Digital & Analogue or Digital: Provide a value to scan for cable channels. ● Automatic Ordering (Depending on the country): Channels found will be automatically ordered following a criterion established by all the main national and local televisions. N Available only when the aerial source is set to Air. ● Others Ordering (Depending on the country): If you select this menu you will find others channels ordering directly organized from private national televisions. N Available only when the aerial source is set to Air. ● Operator Selection (Depending on the country): Selects a provider of cable services. ● Search Mode: If you selected the Cable, the Search Mode screen appears. Scans for all channels with active broadcast stations and stores them in the TV. N If you select Quick, you can set up the Network, Network ID, Frequency, Modulation, and Symbol Rate manually by the remote control. Network: Selects the Network ID setting mode among Auto or Manual. Network ID: When Network is Manual, you can set up Network ID.Frequency: Displays the frequency for the channel. (Differs in each country) Modulation: Displays available modulation values. Symbol Rate: Displays available symbol rates. When Aerial Source is set to Satellite (Depending on the country) ● Channel Type: Select the Channel Type to memorise.● Satellite: Selects the satellite to scan. The option may differ depending on country. ● Scan Mode: Select a scan mode for the selected satellite. ● Re-initialise: Selects the scanning mode of the selected satellite. ● Search Mode: Sets search mode using up/down buttons. Manual TuningMenu → Channel → Manual Tuning Scans for a channel manually and stores in the TV. N If a channel is locked using the Channel Lock function, the PIN input window appears. N This function may not be supported depending on the region. When Aerial Source is set to Air or Cable ● Digital Channel Tuning: Scans for a digital channel. 1. Select the New. N When selecting Aerial → Air: Channel, Frequency, Bandwidth N When selecting Aerial → Cable: Frequency, Modulation, Symbol Rate 2. Select the Search. When scanning has finished, a channel is updated in the channel list. ● Analogue Channel Tuning: Scans for a analogue channel. 1. Select the New. 2. Set the Programme, Colour System, Sound System, Channel and Search. 3. Select the Store. When scanning has finished, a channel is updated in the channel list. Channel mode ● P (programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode. ● C (aerial channel mode) / S (cable channel mode): These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel. When Aerial Source is set to Satellite● Transponder: Selects the transponder. ● Scan Mode: Selects either free or all channels to store. ● Network Search: Enable / Disable network search. ● Signal Quality: Display the current status of broadcasting signal. N Information on a satellite and its transponder is subject to change depending on the broadcasting conditions.N When setting is completed, move to Search. Channel scan is started.Other Features Guide Type Menu → Channel → Guide Type (Depending on the country) You can select a different type of Guide. ● Samsung: Uses the guide programme by provided Samsung. ● Rovi On Screen: Uses the guide programme provided by Rovi International Solutions. N ROVI EPG initial setting time can take a while depending on the region or broadcast environment. Genre Selection for U.K Menu → Channel → Genre Selection Genre Selection is available when Aerial is set to Freesat. ● Genre Selection: Turn the channelgenre selection feature on or off when using the guide. Transfer Channel List Menu → Channel → Transfer Channel List Imports or exports the channel map. You should connect USB storage to use this function. N The PIN input screen appears. Enter the PIN using your remote. ● Import from USB: Import channel list from USB.● Export to USB: Export channel list to USB. This function is available when USB is connected. Fine Tune Menu → Channel → Fine Tune (Analogue channels only) If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear. N Settings are applied to the channel you’re currently watching. N Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner. N To reset the fine-tuning, select the Reset.Crosstalk noise reduction Menu → Channel → Crosstalk noise reduction (Depending on the model) (Analogue channels only) This function reduces diagonal noise in the picture caused by signal crosstalk (interference). If your TV picture displays diagonal noise or distortion when you watch, turn on this function.Satellite System Menu → Channel → Satellite System Satellite System is available when Aerial is set to Satellite. Before running Auto Store, set Satellite System. Then channel scan is run normally. N The PIN input screen appears. Enter your 4 digit PIN number. ● Satellite Selection: You can choose the satellites for this TV. ● LNB Power: Enables or disables the power supply for the LNB. ● LNB Settings: Configures the outdoor equipment. Satellite: Selects the satellite for receiving digital broadcasts. Transponder: Selects a transponder from the list or adds a new transponder. DiSEqC Mode: Selects DiSEqC mode for the selected LNB. Lower LNB Oscillators: Sets the LNB oscillators to a lower frequency.Upper LNB Oscillators: Sets the LNB oscillators to a higher frequency. Tone 22 kHz: Selects the Tone 22 kHz depending on the LNB type. For a universal LNB it should be Auto. Signal Quality: Display the current status of broadcasting signal. ● SatCR/Unicable Settings: Configure single cable installation. N This function may not support depending on the region.SatCR/Unicable: Enables or disable single cable installation support. Slot Number: Select the SatCR user slot number for this receiver. Slot Frequency: Enter the appropriate frequency to receive the signal from SatCR. Detect Slot Frequency: Auto-detect the signal frequency for the selected slot number. Verify Slot Frequency: Verify that the frequency entered corresponds to the selected slot. ● Positioner Settings: Configures the aerial positioner. Positioner: Enables or disables the positioned control. Positioner Type: Sets the positioned type between DiSEqC 1.2 and USALS (Universal Satellite Automatic Location System). – My Longitude: Sets the longitude for my location. – My Latitude: Sets the latitude for my location. – Satellite Longitude Settings: Sets the longitude of user defined satellites. User Mode: Sets the position of satellite aerial according to each satellite. If you store the current position of satellite aerial according to a certain satellite, when the signal of that satellite is needed, the satellite aerial can be moved to pre-populated position. – Satellite: Selects the satellite to set the position for. – Transponder: Selects a transponder from the list for signal reception. – Moving Mode: Selects the movement mode between discrete and continuous movement. – Step Size: Adjusts the step size degrees for the aerial rotation. Step Size is available when Moving Mode is set to Step. – Go To Stored Position: Rotates the aerial to the stored satellite position. – Aerial Position: Adjusts and stores the aerial position for the selected satellite. – Store Current Position: Stores current position as the selected positioner limit. – Signal Quality: Display the current status of broadcasting signal. Installer Mode: Sets limits to the scope of movement of satellite aerial or reset the position. Generally, installation guide uses this function. – Limit Position: Selects the direction of the positioner Limit. – Aerial Position: Adjusts and stores the aerial position for the selected satellite. – Store Current Position: Stores the current position as the selected positioner Limit. – Go To Zero: Moves the aerial to the reference position. – Reset Positioner Limit: Allows the aerial to rotate over the full arc. ● Reset All Settings: All satellite settings will be reset to the initial values.Changing the Preset Picture Mode Picture Mode Menu → Picture → Picture Mode Picture modes apply preset adjustments to the picture. N When your TV is connected to a PC via an HDMI to DVI cable, you can only select Entertain and Standard. ● Dynamic Suitable for a bright room. Basic Feature● Standard Suitable for a normal environment. ● Natural for LED TV / Relax for PDP 6500 Series Suitable for reducing eye strain. ● Movie Suitable for watching movies in a dark room. ● Entertain Suitable for watching movies and games.N Only available when the TV is connected to a PC via an HDMI to DVI and an HDMI to HDMI cables. Samsung MagicAngle for LED 5400 Series Menu → Picture → Samsung MagicAngle Adjust screen viewing Angle to optimize screen quality according to your viewing position. ● Samsung MagicAngle: When viewing the screen at an angle from below or above by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front. – Off: Select when viewing from the front position. – Lean Back Mode: Select when viewing from a slightly lower position. – Standing Mode: Select when viewing from the upper position.● Mode: Adjust screen viewing angle. N When Samsung MagicAngle is set to Lean Back Mode or Standing Mode, Gamma is not available.Adjusting Picture Settings Backlight for LED TV / Cell Light for PDP TV Menu → Picture → Backlight / Cell Light Adjusts the pixel brightness. 20 is the brightest setting. Contrast Menu → Picture → Contrast Adjusts contrast level. Values closer to 100 mean bigger light/dark contrast.Brightness Menu → Picture → Brightness Adjusts brightness level. Values closer to 100 mean brighter screen. Sharpness Menu → Picture → Sharpness Adjusts sharpness of picture. Values closer to 100 mean a sharp image. Colour Menu → Picture → ColourAdjusts colour saturation level. Values closer to 100 mean more intense colours. Tint (G/R) Menu → Picture → Tint (G/R) Adjusts tint levels for green and red. Values closer to 100 mean greater intensity for that colour. To adjust picture quality, follow these steps:1. Select an option you want to adjust. When you select an option, a slider screen appears. 2. Adjust the option value using your remote. N When you change an option value, the change will affect the OSD menu also. N When your TV is connected to a PC via an HDMI to DVI cable, Colour and Tint (G/R) is not available.N You can adjust and store settings for each external device connected to the TV. N Lowering picture brightness reduces power consumption.Changing the Picture Size Screen Adjustment Menu → Picture → Screen Adjustment Using this function, you can select various picture size and aspect ratio options. ● Picture Size Your cable box / satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time. Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratios. 16:9: Adjusts the picture size to 16:9 for DVDs or wide broadcasting. Wide Zoom: Magnifies the picture size more than 4:3. Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size. 4:3: The default setting for a movie or normal broadcasting.N Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention (screen burn) which is not covered by the warranty. Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p), DTV (1080i, 1080p) or Component (1080i / 1080p) signals are inputted.Smart View 1: Reduces the 16:9 picture by 50% for LED 5300, LED 5500 series and above Smart View 2: Reduces the 16:9 picture by 25% for LED 5300, LED 5500 series and above N Smart View 1 is enabled only in HDMI mode. N Smart View 2 is enabled only in HDMI or DTV mode. N The picture size can vary when you play content from Videos in AllShare Play. ● Zoom/position Adjusts the picture zoom and position. Zoom is only available if Picture Size is set to Zoom. Position is only available if Picture Size is set to Wide Zoom, Zoom, or Screen Fit. To use the Zoom function after selecting Zoom, follow these steps:1. Select Zoom. 2. On the Zoom/position screen, select Zoom, and then zoom in or zoom out using your remote. 3. When done, select Zoom again, and then select Close. 4. To reset the picture, press Reset. To use the Position function after selecting Wide Zoom, Zoom or Screen Fit, follow these steps:1. Select the Position. 2. On the Position screen, select Position, and then move the picture to position you want using your remote. 3. When done, select Position again, and then select Close. 4. To reset the picture position, select Reset. Picture Sizes available by Input Source:– ATV, EXT, AV: Auto Wide, 16:9, Wide Zoom, Zoom, 4:3 – DTV (576i, 576p, 720p): Auto Wide, 16:9, Wide Zoom, Zoom, 4:3, Smart View 2 for LED 5300, LED 5500 series and above – DTV(1080i, 1080p) : Auto Wide, 16:9, Wide Zoom, Zoom, 4:3, Screen Fit, Smart View 2 for LED 5300, LED 5500 series and above – Component (480i, 480p, 576i, 576p, 720p): 16:9, Wide Zoom, Zoom, 4:3 – Component (1080i, 1080p): 16:9, Wide Zoom, Zoom, 4:3, Screen Fit – HDMI (480i, 480p, 576i, 576p): 16:9, Wide Zoom, Zoom, 4:3, Smart View 1 for LED 5300, LED 5500 series and above Smart View 2 for LED 5300, LED 5500 series and above – HDMI (720p, 1080i, 1080p): 16:9, Wide Zoom, Zoom, 4:3, Screen Fit, Smart View 1 for LED 5300, LED 5500 series and above Smart View 2 for LED 5300, LED 5500 series and above N Depending on the input source, the picture size options may vary. N The available items may differ depending on the selected mode. N HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720) N You can adjust and store settings for each external device you have connected to an input on the TV. Select the Source, and then adjust the settings. ● 4:3 Screen Size Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size. N Not available in Component or HDMI mode. ● PC Screen Adjustment for LED 5400 Series N Available in PC mode only. – Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, use the Coarse function to adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned with the centre of screen. – Position: Adjust the PC’s screen position using your remote if it is not centred or does not fit the product screen. – Image Reset: Resets the image to the default settings. Auto Adjustment for LED 5400 Series Menu → Picture → Auto Adjustment Automatically adjusts the picture's frequency, position, and fine tune settings in the PC mode. N Available in PC mode only. N Not available if you connect your PC with an HDMI or an HDMI to DVI cable.Changing the Picture Options Advanced Settings Menu → Picture → Advanced Settings Using this function, you can configure advanced picture settings to create your preferred picture. N Advanced Settings is available only when the Picture Mode is set to Standard or Movie mode. N When connecting a PC using an HDMI-DVI cable, you can only make changes to White Balance and Gamma. ● Dynamic Contrast Adjusts the screen contrast. ● Black Tone Select the black level to adjust the screen depth. ● Flesh Tone Emphasizes pink “Flesh Tone.” ● RGB Only Mode Displays the Red, Green and Bluecolours so you can make fine adjustments to hue and saturation. ● Colour Space Adjusts the range and variety of colours (the colour space) available to create images. N for LED 6100 - 7200 Series and PDP 6500 Series To adjust Colour, Red, Green, Blue and Reset, set the Colour Space to Custom. ● White BalanceAdjusts the colour temperature for a more natural picture. R-Offset / G-Offset / B-Offset: Adjusts each colour’s (red, green, blue) darkness. R-Gain / G-Gain / B-Gain: Adjusts each colour’s (red, green, blue) brightness. Reset: Resets the White Balance to its default settings. ● 10p White Balance for LED 4500 - 5700 Series and PDP 550 - 570 Series : This function is not supported. Lets you control the white balance by adjusting the red, green, and blue brightness in 10 point intervals. N Available when the Picture Mode is set to Movie. Available for all video source. N Some external devices may not support this function. Interval: Select the interval to adjust. Red: Adjusts the red level.Green: Adjusts the green level. Blue: Adjusts the blue level. Reset: Resets the 10p White Balance to its default settings. ● Gamma Adjusts the primary colour intensity. ● Expert Pattern for LED 4500 - 5700 Series and PDP 550 - 570 Series : This function is not supported. Use the Expert Pattern function to calibrate the picture. If the OSD menu disappears or a menu other than the Picture menu is opened, the TV saves the calibration and the Expert Pattern screen disappears. Off: Turns the Expert Pattern function off. Pattern1: This test screen demonstrates the effect of your display settings on shades of grey and black. Pattern2: This test screen demonstrates the effect of your display settings on colours. N After selecting Pattern1 or Pattern2, you can adjust any of the advanced settings for the desired effect. N While the Expert Pattern is running, the TV does not output sound. N Only enabled in DTV, Component, and HDMI modes. ● xvYCC for LED 4500 - 5700 Series and PDP 550 - 570 Series : This function is not supported.Setting xvYCC on increases picture detail and enlarges the colour space when you are watching movies input from an external device (e.g. BD/DVD player) connected to the TV’s HDMI or Component IN jacks. N Available only when you set the Picture Mode to Movie and the external input to HDMI or Component. N Some external devices may not support this function. ● Motion Lighting Reduces power consumption by reducing screen brightness when the picture on the screen is in motion. N This feature is not supported in 3D mode. N Only available in Standard mode. N When you change the Backlight for LED TV / Cell Light for PDP TV , Contrast, or Brightness, the TV sets Motion Lighting to Off. Picture Options Menu → Picture → Picture Options Using this function, you can configure additional picture settings to suit your preference. N When your TV is connected to a PC via an HDMI to DVI cable, you can only make changes to Colour Tone. ● Colour ToneSelect the colour temperature. N Warm1 or Warm2 will be deactivated when the Picture Mode is set to Dynamic. N You can adjust and store settings for each external device connected to an input on the TV. Select Source and then adjust the settings. ● Digital Noise Filter If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen. Auto Visualisation: When changing analogue channels, displays signal strength. N When the signal is weak, try all the options until the TV displays the best picture. N Only available for analogue channels. N When the bar is green, you are receiving the best possible signal. ● MPEG Noise Filter Reduces MPEG noise to provide improved picture quality. ● HDMI Black Level Lets you adjust the screen depth by selecting a black level. N Available only in HDMI mode. ● Film Mode Sets the TV so that it senses and then processes film signals from all sources automatically and adjusts the picture for optimum quality. N Available in TV, AV, Component (480i / 1080i) and HDMI (1080i). ● Motion Plus for LED TV for LED 5400 - 5500 Series : This function is not supported. Removes drag from fast scenes with a lot of movement to provide a clearer picture. N The Info screen on your TV displays the resolution and frequency of the incoming signal (60Hz), but not the frequency the TV is generating for the image it is displaying by using Motion Plus function. N If noise occurs on the screen, please set up the Motion Plus to Off. If Motion Plus is Custom, you can set up the Blur Reduction, Judder Reduction or Reset manually. N If Motion Plus is Demo, you can compare the difference of on and off modes. Blur Reduction: Adjusts the blur reduction level from video sources. Judder Reduction: Adjusts the judder reduction level from video sources when playing films. Reset: Reset the custom settings to the factory defaults. ● LED Motion Plus for LED TV for LED 4500, 5400 Series : This function is not supported. Removes drag from fast scenes with a lot of movement to provide a clear picture. Reset Picture Menu → Picture → Reset Picture Resets your current picture mode to its default settings.Using the TV with Your PC Using Your TV as a Computer (PC) Display Entering the Video Settings (Based on Windows 7) For your TV to work properly as a computer display, you must enter the correct video settings after you have connected the TV to your PC. N Depending on your version of Windows and your video card, the procedure on your PC will probably differ slightly from the procedure presented here. N However, the same basic information will apply in most cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. Click “Control Panel” on the Windows start menu. 2. Click “Appearance and Themes” in the “Control Panel” window. A display dialog box appears. 3. Click “Display”. Another display dialog box appears. 4. Click the “Settings” tab on the display dialog box. – On the Settings tab, set the correct resolution (screen size). The optimal resolution for this TV is 1920 x 1080. – If a vertical-frequency option exists on your display settings dialog box, select “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.Changing the Preset Sound Mode Sound Mode Menu → Sound → Sound Mode Sound modes apply preset adjustments to the sound. N If Speaker Select is set to External Speaker, Sound Mode is disabled. ● Standard Selects the normal sound mode. ● Music Emphasizes music over voices.● Movie Provides the best sound for movies. ● Clear Voice Emphasizes voices over other sounds. ● Amplify Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired.Adjusting Sound Settings Sound Effect Menu → Sound → Sound Effect N If Speaker Select is set to External Speaker, Sound Effect is disabled. N Available only when the Sound Mode is set to Standard. ● SRS TruSurround HD This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF (Head Related Transfer Function) technology. ● SRS TruDialog This function allows you to increase the intensity of voices over background music or sound effects so that dialog can be heard more clearly. ● Equaliser The Equaliser displays a series of sliders. Use the arrow buttons to select a slider, and then change the slider’s value. To Reset the Equaliser, select Reset. A pop-up appears asking if you want to reset. Select Yes. To exit, select Close. Balance L/R: Adjusts the balance between the left and right speaker. 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the volume level of specific bandwidth frequencies.Reset: Resets the equalizer to its default settings. Broadcast Audio Options Menu → Sound → Broadcast Audio Options ● Audio Language (Digital channels only) Change the default value for audio languages. N The available language may differ depending on the broadcast.● Audio Format (Digital channels only) When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function. N Audio Format option may differ depending on the broadcast. 5.1ch Dolby digital sound is only available when connecting an external speaker through an optical cable. ● Audio Description (Not available in all locations) (Digital channels only) This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster. N Audio Description (Off / On): Turn the audio description function on or off. N Volume: Adjust the audio description volume. Additional Settings Menu → Sound → Additional Settings ● DTV Audio Level (Digital channels only) This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level. N According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB. N To increase or decrease the volume, adjust between the range 0 and -10 respectively. ● SPDIF Output SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player. ● Audio Format: You can select the Digital Audio output (SPDIF) format. N The available Digital Audio output (SPDIF) format may differ depending on the input source. ● Audio Delay Lets you correct timing mismatches between the audio track and the video when you are watching the TV and listening to digital audio output from the TV through an external device such as an AV receiver. When you select the Audio Delay function, a slider screen appears. Adjust the option value using your remote (0ms ~ 250ms). ● Dolby Digital Comp This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).N Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time. Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB. RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB.Speaker Settings Menu → Sound → Speaker Settings ● Speaker Select If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused by the difference in decoding speed between the TV’s speakers and the speakers attached to your audio receiver. If this occurs, set the TV to External Speaker.N When Speaker Select is set to External Speaker, the TV’s speakers are turned off. You will hear sound through the external speakers only. When the Speaker Select is set to TV Speaker, both the TV’s speakers and the external speakers are on. You will hear sound through both. N When the Speaker Select is set to External Speaker, the volume buttons and mute functions will not operate and the sound settings will be limited. N If there is no video signal, both the TV’s speakers and the external speakers will be mute. ● Auto Volume Normal: Automatically equalizes the volume level when switching to another channel. Night: Automatically equalizes and decrease the volume level on each channel, so each channel is quieter. Night is useful at night, when you may want to keep the volume low. N To use the volume control of a connected source device, set Auto Volume to Off. If Auto Volume is set to Normal or Night, adjusting the volume control of a connected source device may have to effect. Reset SoundMenu → Sound → Reset Sound Reset all sound settings to the factory defaults.Connecting to the Network The Wired Network Connection There are three ways to attach your TV to your LAN using cable: N For illustrations of the three kinds of wired network connections, see your paper user's manual. – You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external Preference Featuresmodem using a LAN cable. – You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a router which is connected to an external modem. Use LAN cable for the connection. – You may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a LAN cable. Note that the wall outlet is attached to a modem or router elsewhere in your house. N If your network requires a Dynamic IP address, you should use an ADSL modem or router that supports the Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you do not have to enter them manually. Most home networks use a Dynamic IP address. N Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows computer, you can also get these values through your computer. N You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that support DHCP also let you use Static IP addresses. The Wireless Network ConnectionN For an illustration of the wireless network connection, see your paper user's manual. N for LED 5500 - 5700 Series and PDP 550 - 570 Series To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN adapter (WIS10ABGN or WIS12ABGNX), which you connect to your TV’s USB port. Samsung Wireless LAN adapter is sold separately and is offered by selected retailers, Ecommerce sites and Samsungparts.com. You can connect your TV to your LAN through a standard wireless router or modem. This TV supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a network connection using IEEE 802.11 a/b or g, the video may not play smoothly. N for LED 5500 - 5700 Series and PDP 550 - 570 Series The Samsung Wireless LAN Adapter and the USB extension Cable are sold separately and are offered by select retailers, Ecommerce sites and Samsungparts.com. N for LED 5500 - 5700 Series and PDP 550 - 570 Series Ensure the TV is turned on before you connect the Samsung Wireless LAN adapter. N for LED 5500 - 5700 Series and PDP 550 - 570 Series The Samsung Wireless LAN adapter may not be recognized when using a connection via a USB hub or via a USB extension cable other than the cable supplied. N To use a wireless network, your TV must be connected to a wireless router or modem. If the wireless router or modem supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. N Select a channel on the wireless router or modem that is not currently being used. If the channel set for the wireless router or modem is currently being used by another device nearby, this will result in interference and communication failure. N Your TV supports only the following wireless network security protocols: – Authentication Mode : WEP, WPAPSK, WPA2PSK – Encryption Type : WEP, TKIP, AES N If you select the Pure Highthroughput (Greenfield) 802.11n mode and the Encryption type is set to WEP or TKIP on your AP (access point) or wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications. N If your wireless router or modem supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or a PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode. N If your router, modem, or device is not certified, it may not connect to the TV. N Connection Methods: You can set up the wireless network connection in four ways: – Using Auto Setup (with the Auto Network Search function) – Using Manual Setup – Using WPS(PBC) – Using Plug & Access Notice for LED 5500 - 5700 Series and PDP 550 - 570 Series The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN adapter. If this occurs, establish a connection using one of the following methods or connect the Samsung Wireless LAN adapter using a USB cable in a place that is not affected by radio interference. ● Method 1: Connecting the Samsung Wireless LAN adapter using the USB right angle adapter. To connect the Samsung Wireless LAN adapter using the USB right angle adapter, follow these steps: 1. Connect the USB right angle adapter to the Samsung Wireless LAN adapter. 2. Connect the other end of the right angle adapter to the USB port.● Method 2: Connecting the Samsung Wireless LAN adapter via an extension cable. To connect the Samsung Wireless LAN adapter using the extension cable, follow these steps: 1. Connect the extension cable to the USB port. 2. Connect the extension cable and Samsung Wireless LAN adapter.3. Attach the Samsung Wireless LAN adapter to the back of the TV near the top, using double-sided adhesive tape.Setting up a Wired Network Network Settings Menu → Network → Network Settings Set up the wired or wireless network connection so you can use various Internet services such as Smart Hub and AllShare Play and perform software upgrades. Automatic Wired Network Setup You can configure your TV's wired network connection automatically when connecting your TV to a network that supports DHCP. N If you have connected a LAN cable, the wired network set up screen appears automatically. To set up your TV’s wired network connection automatically, follow these steps: 1. Go to the Network Settings screen. (Network → Network Settings) 2. Select Start. The network test screen appears and verifies the network connection. 3. When the connection has been verified, the "You are connected to the Internet. If you have any problems using online services, please contact your Internet service provider." message appears. Select OK.N If the connection process fails, check the LAN port connection. N If the automatic process cannot find the network connection values or if you want to set the connection manually, go to the next section, "Manual Network Setup." Manual Wired Network Setup You can configure your TV's wired network connection manually when connecting your TV to a network that requires a Static IP address. Getting the Network Connection Values To view the Network connection values on Winows XP computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. 2. In the pop-up menu that appears, click Status. 3. On the dialog that appears, click the Support tab. 4. On the Support Tab, click the Details button. The Network connection values are displayed. To set up your TV's wired network connection manually, follow these steps: 1. Go to the Network Settings screen. (Network → Network Settings) 2. Select Start. The network connection screen appears and the verification process starts. 3. Select Stop. The verification process stops. Select IP Settings on network connection screen. The IP Settings screen appears. 4. Select the IP Mode, and then set the IP Mode to Manual. 5. Go to the IP Address entry field, and then select the IP Address using the remote.6. Enter the first portion of the IP Address (for example, 105) into the first entry field using your remote. When done, go to the next field. 7. Enter the next portion of the IP Address. When done, go to the next field. 8. Repeat the entry process for each field in the IP Address. N If you make a mistake when entering a number, re-enter the number to correct it. 9. When done, go to the Subnet Mask fields. 10.Repeat the same entry process for Subnet Mask, Gateway, and DNS Server. 11.When done, select OK. The network test screen appears and the verification process starts. When the connection has been verified, the "You are connected to the Internet. If you have any problems using online services, please contact your Internet service provider." message appears. Select OK. Network Status Menu → Network → Network Status You can check the current network and Internet status. If the wired network connection failed...● No network cable found. Check if your network cable is plugged in. If it is connected, make sure that the router is turned on. If it is on, try turning if off and on again. ● IP auto setting failed. Try the following to set your IP address automatically or set your IP address manually by selecting IP Settings. 1) Ensure that DHCP server is enabled on the router. 2) Unplug and re-plug-in the router. 3) Contact your Internet Service Provider for more information ● Unable to connect to the network. Try the following: check if your IP address is set correctly in IP Settings. Contact your Internet Service Provider for more information. ● Connected to your local network, but cannot connect to the Internet. Check the DNS settings in IP Settings or contact your Internet Service Provider to access the Internet. ● Network setup complete, but cannot connect to the Internet. Contact your Internet Service Provider to access the Internet.Setting up the Wireless Network Network Settings Menu → Network → Network Settings Set up the wired or wireless network connection so you can use various Internet services such as Smart Hub and AllShare Play and perform software upgrades. Automatic Wireless Network Setup Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up wireless security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the automatic or manual setup process. N Depending on your router or modem, you may be able to use a WPS PIN instead. To set up your TV’s wireless network connection automatically, follow these steps: 1. Go to the Network Settings screen. (Network → Network Settings) 2. Select Start. The network function searches for available wireless networks. When done, it displays a list of the available networks. 3. In the list of networks, select a network you want to connect to and then select Next. N If the wireless router is set to Hidden (Invisible), you have to select Add Network and enter the correct Network Name (SSID) and Security Key to establish the connection. 4. If the Enter security key screen appears, go to step 5. If you selected a wireless router that does not have wireless security, go to step 7. 5. To set wireless security for the router, enter the Security Key (Security key or PIN). N You can enter the Security Key (Security key or PIN) using a keyboard screen. Enter the Security Key using your remote. N A keyboard can be used to enter the security key via a USB or Bluetooth connection. The Bluetooth feature might not be available depending on model. N You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem. 6. When done, select Next. The network connection screen appears and the verification process starts. 7. When the connection has been verified, the You are connected to the Internet. If you have any problems using online services, please contact your Internet service provider.message appears. N If the network does not accept the Security Key or PIN, select Retry or select IP Settings to enter the settings manually. N If you want to set up the connection manually, select IP Settings. Then, go to the next section, “Manual Network Setup”. Manual Wireless Network Setup You can configure your TV's wireless network connection manually when connecting your TV to a network that requires a Static IP address or if the automatic connection process has failed. Getting the Network Connection Values To view the Network connection values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. 2. In the pop-up menu that appears, click Status. 3. On the dialog that appears, click the Support tab. 4. On the Support Tab, click the Details button. The Network connection values are displayed. To set up your TV's wireless network connection manually, follow these steps: 1. Go to the Network Settings screen. (Network → Network Settings) 2. Select Start. The network function searches for available wireless networks. When done, it displays a list of the available networks. 3. In the list of networks, select a network you want to connect to and then select Next. N If the wireless router is set to Hidden (Invisible), you have to select Add Network and enter the correct Network Name (SSID) and Security Key to establish the connection. 4. If the Enter security key screen appears, go to step 5. If you select a wireless router that does not have wireless security, go to step 7. 5. To set wireless security for the router, enter the Security Key (Security key or PIN). N You can enter the Security Key (Security key or PIN) using a keyboard screen. Enter the Security Key using your remote. N You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem. 6. When done, select Next. The network connection screen appears and the verification process starts. 7. Select Stop. The verification process stops. Select IP Settings on the network connection screen. The IP Settings screen appears. 8. Select IP Mode, and then set the IP Mode to Manual. 9. Go to the IP Address entry field, and then select the IP Address using the remote. 10.Enter the first portion of the IP Address (for example, 105) into the first entry field using your remote. When done, go to the next field. 11.Enter the next portion of the IP Address. When done, go to the next field. 12.Repeat the entry process for each field in the IP Address. N If you make a mistake when entering a number, re-enter the number to correct it.13.When done, go to the Subnet Mask fields. 14.Repeat the same entry process for Subnet Mask, Gateway, and DNS Server. 15.When done, select OK. The network connection screen appears and the verification process starts. When the connection has been verified, the "You are connected to the Internet. If you have any problems using online services, please contact your Internet service provider." message appears. WPS(PBC) Network Setup If your router has a WPS(PBC) button, you can configure your TV's wireless network connection using the WPS(PBC) button quickly and easily. To set up your TV's wireless network connection using WPS(PBC), follow these steps: 1. Go to Network Settings screen. (Network → Network Settings) 2. Select Start. The network function searches for available wireless networks. When done, it displays a list of the available networks. 3. Select the WPS(PBC). 4. Press the WPS(PBC) button on your router within 2 minutes. Your TV automatically acquires all the network setting values it needs and connects to your network. 5. The network connection screen appears, and network setup is done. Plug & Access Network Setup The Plug & Access function lets you easily connect your Samsung TV to your Samsung wireless router (sold separately) by using a USB memory stick to transfer the setup information from the router to the TV. If your non-Samsung wireless router does not support Plug & Access, you must connect using one of the other methods. N You can check for equipment that supports Plug & Access on www. samsung.com. To set up your TV's wireless network connection using Plug & Access, follow these steps: 1. Turn on the Samsung wireless router and your TV. 2. Insert a USB memory stick into the USB port in your Samsung wireless router. Check the router’s LED’s to make sure it is on (Blinking → on). 3. Take the USB memory stick out of the router, and then insert it into a USB port on your Samsung TV. The memory stick downloads the connection information. 4. Wait until the connection is automatically established. N If Plug & Access does not connect your TV to your wireless router, a popup screen appears on the screen notifying you of the failure. If you want to try using Plug & Access again, disconnect the USB memory stick, reset the router, and then try again from Step 1. You can also choose one of the other connection setup methods. 5. The network connection screen appears, and the network setup is done. N If the wireless router’s settings change or you install a new wireless router, you must perform the Plug & Access procedure again, beginning from Step 1.Network Status Menu → Network → Network Status You can check the current network and Internet status. If the wireless network connection failed... ● Wireless network connection failed. No wireless router selected. Go to Network Settings to select your router. ● Unable to connect to wireless router. Try the following: check if the router is turned on, and if it is, try turning it off and on again. Check if you need to enter a security key to use the router. ● IP auto setting failed. Try the following to set your IP address automatically or set your IP address manually by selecting IP Settings. 1) Ensure that DHCP server is enabled on the router. 2) Unplug and re-plugin the router. 3) Contact your Internet Service Provider for more information.● Unable to connect to the network. Try the following: check if your IP address is set correctly in IP Settings. Contact your Internet Service Provider for more information. ● Connected to your local network, but cannot connect to the Internet. Check the DNS settings in IP Settings, or contact your Internet Service Provider to access the Internet. ● Network setup complete, but cannot connect to the Internet. Contact your Internet Service Provider to access the Internet.Managing the Network Connected Devices Wi-Fi Direct Menu → Network → Wi-Fi Direct Set to connect the TV to wireless mobile devices. Using this function, you can connect wireless mobile devices to your TV directly without a router. N To use this function, your mobile device should be supported by the Wi-Fi Direct.N for LED 5500 - 5700 Series and PDP 550 - 570 Series You can use this function when connecting the Samsung Wireless LAN Adapter. (May not be available, depending on your model.) To connect your mobile device with your TV using Wi-Fi Direct, follow these steps: 1. Turn on the Wi-Fi Direct device and activate its Wi-Fi Direct function.2. Go to the Wi-Fi Direct screen. (Network → Wi-Fi Direct) The TV starts to search devices and then displays the devices on the Wi-Fi Direct screen. 3. Turn on the Wi-Fi Direct function on your device. Select the desired Wi-Fi device. – For PBC: Press the WPS(PBC) button on your Wi-Fi device within 2 minutes. The Connecting popup appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected. – For PIN: Input the displayed PIN on your device. The Connecting popup appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected. N If you want to disconnect the device, select the connected Wi-Fi device, and then select Disconnect. N The TV and BD products perform the role of the Group Owner. If a TV or BD is connected via Wi-Fi Direct, the connected device is represented as a Group Owner in the Wi-Fi Direct list. However, even in this case, the TV cannot connect to another TV or BD through Wi-Fi Direct. Soft AP Menu → Network → Soft AP Using this function, you can connect the TV to your mobile devices if your mobile devices do not support Wi-Fi Direct. The Soft AP screen lets you set the options for connecting Wi-Fi devices. ● Soft APTurns Soft AP on or off. When Soft AP is set to On, your mobile devices can find the TV's network name in their WiFi connection list. ● Security Key Enter a Security Key at least 8 characters long using the remote control. Select Done when finished. – If the security key is not at least 8 characters long, Done is not available.– To connect a mobile device to the TV, you must input the security key into the device. – If network does not operate correctly, check the security key again. An incorrect security key may cause a malfunction. Using Wi-Fi Direct or Soft AP, you can share data through AllShare Play. (For only some of the mobile device models among the mobile device models supporting Wi-Fi Direct or Soft AP.) Wi-Fi Direct Soft AP Number of Wi-Fi devices that can be connected Up to 5 Up to 5 Data sharing Supported through AllShare (only for supported mobile device models.) Only through AllShare AllShare Settings Menu → Network → AllShare Settings AllShare Play lets you play Videos, Photos, or Music located on your PC or your DLNA compatible device on the TV using a network connection. It also lets you control the TV through these devices. The AllShare Settings screen lists your network connected AllShare devices and their IP addresses. Through this screen, you can allow a device to access the TV, deny access, or delete the device from the AllShare list. The AllShare Settings screen only displays devices if you have established networked connections to AllShare devices. Otherwise, it will be empty. To use the AllShare network function, you must install the AllShare network software on your PC. For details on set up options, refer to "Using the AllShare Play Functions". Device Name Menu → Network → Device NameEnter a name for this TV. This name will be shown on network remote controls and devices using AllShare Play. N A keyboard appears on the screen. Key in a name for your TV manually using your remote. When finished, select Done. N To enter letters, highlight and select each letter. To enter numbers, highlight and select each number or press the number buttons on your remote. N To shift to capital letters (or from capital letters to lower case), select the Caps or Shift button. N To display symbols and punctuation, select . To redisplay letters, select again.Setting the Time Time Menu → System → Time N The current time will appear every time you select INFO using your remote. ● Clock Set the clock to use the various timer features of the TV. N If you disconnect the power cord, you have to set the clock again.Clock Mode: Set the current time manually or automatically. – Auto: The TV sets the current time automatically using the time from a digital channel. N You must have the cable or an aerial connected to the TV to set the time automatically. N Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually. – Manual: Set the current time manually. Clock Set: Set the Date and Time manually. You can set the current date and time using your remote. N Available only when the Clock Mode is set to Manual. Time Zone: Select your time zone. N This function is only available when the Clock Mode is set to Auto.GMT: Selects your time zone. N When Country is set to Others, you can use this function. DST: Switches the DST (Daylight Saving Time) function on or off. N This function is only available when the Clock Mode is set to Auto. ● Sleep Timer Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150, or 180 minutes).N Select a period of time using your remote. To cancel the Sleep Timer, select Off. ● On Timer Set On Timer so that your TV turns on automatically at a time and on a day of your choosing. You can set up three separate On Timer configurations (On Timer 1, On Timer 2, On Timer 3) and select the source of the content the TV plays when it turns on: an air or cable channel, a USB device, or a set-top box connected to one of the TV's inputs (HDMI1, AV, etc.). N You must set the clock before you can use the On Timer function. Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose the days you want On Timer to turn on your TV. N The c mark indicates days you’ve selected. Time: Set the time that the TV turns on automatically. Volume: Set the desired volume level. Change the volume level using your remote. Source: To select the source of the content that will play when the TV turns on. You can: – Select TV and have the TV display a specific air or cable channel.– Select USB and have the TV play back photo or audio files from a USB device. – Select a source on your TV (HDMI1, HDMI2, Component, etc.) that you have connected a set-top box to, and have the TV display a channel from the set-top box. N The USB device must be connected to your TV before you can select USB.N If you select a source other than TV or USB, you must: Œ Have a cable or satellite set-top box attached to that source Œ Set the set-top box to the channel you want to watch when the TV goes on Œ Leave the set-top box turned on. N When you select a source other than TV or USB, the Aerial and Channel options will disappear.Aerial (when the Source is set to TV): Select ATV or DTV. Channel (when the Source is set to TV): Select the desired channel. Music / Photo (when the Source is set to USB): Select a folder in the USB device that contains music that you want played when the TV turns on automatically or a folder that contains music and a folder that contains photo files. If you select both, the TV will display the photos you selected as it plays the music you selected. To select folders on the USB device, follow these steps: 1. Select Music. The TV displays a single folder (the Root folder) and the type or name of the device. 2. Select the type or name of the device you want to play. A list of folders on the selected device appears. N If there are no folders on your device, move the highlight to the Select, and then select the Root folder. The Timer screen re-appears with the name of the device in the Music field. Go to Step 4. 3. Highlight a folder that contains music, highlight the Select next to it. The Timer screen re-appears with the folder name in the Music field. 4. If you want the TV to display photos as the music you chose plays, select Photos, and then repeat the same process. 5. When done, select the Close at the bottom of the screen. N You must select a music file. You cannot select only a photo file. N If there is no music file on the USB device or you don’t select a folder containing a music file, the Timer function does not operate correctly. N If there is only one photo file in the USB, the slide show will not play. N If a folder name is too long, the folder cannot be selected. N Each USB you use is assigned its own folder. When using more than one of the same types of USB, make sure the folders assigned to each USB have different names. N We recommend that you use a USB memory stick and a multi card reader when using the On Timer. The On Timer function may not work with USB devices that have a built-in battery, MP3 players, or PMPs made by some manufacturers because the TV can take too long to recognize these devices. N If you set the On Timer to play a file saved on a USB HDD, it may take up to 40 seconds or more to play the file after the TV is turned on. ● Off TimerSet Off Timer so that your TV turns off automatically at a time and on a day of your choosing. You can set up three separate Off Timer configurations. (Off Timer 1, Off Timer 2, Off Timer 3) N You must set the clock before you can use the Off Timer. Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose the days you want Off Timer to turn off your TV. N The c mark indicates days you’ve selected. Time: Set the time that the TV turns off automatically.Blocking Programmes Security Menu → System → Security Using this function, you can configure programme related security options. Every time you access the Security functions, the PIN screen will appear and you must enter that PIN. The PIN screen closes and the Security menu appears.● Channel Lock Lock channels in Channel menu, to prevent unauthorized users, such as children, from watching unsuitable programme. N Available only when the Source is set to TV. ● Programme Rating Lock (Depending on the country) When turned on, the Programme Rating Lock feature can automatically block programmes that you deem inappropriate for your children. You must enter a PIN (personal identification number) before you can set or change any of the Programme Rating Lock restrictions. N The items of Programme Rating Lock differs depending on the country. ● Adult genre enabling for U.K You can adjust the Adult genre enabling.N The Adult genre enabling is available for Freesat aerial only. ● Change PIN The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them in the Enter New PIN. Reenter the same 4 digits in the Confirm New PIN. When the Confirm screen disappears, select Close. The TV has memorised your new PIN.How to watch a restricted programme or movie If the TV is tuned to a restricted programme or movie, the Programme Rating Lock will block it. The screen will go blank and the message This channel is blocked by Channel lock settings. Please enter PIN to unblock. appears. Enter the PIN to unblock the programme or movie using your remote.Economical Solutions Eco Solution Menu → System → Eco Solution ● Energy Saving Lets you adjusts the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except the volume button to turn on the screen. ● Eco Sensor for LED 4500, LED 5400 Series : This function is not supported. To enhance your power savings, the picture settings will automatically adapt to the light in the room. N If you adjust Backlight for LED TV / Cell Light for PDP TV in the Picture menu, the Eco Sensor is set to Off automatically.Min. Backlight for LED TV / Min Cell Light for PDP TV : When the Eco Sensor is set to On, you can manually adjust the minimum screen brightness. N If the Eco Sensor is set to On, the display brightness may change (become slightly darker or brighter) depending on the surrounding light intensity. You can control the screen’ s minimum brightness with the Min. Backlight for LED TV / Min Cell Lightfor PDP TV function. ● No Signal Power Off To avoid unnecessary energy consumption, you can set how long you want the TV to remain on if it’s not receiving a signal. ● Auto Power Off The TV will automatically turned off when no user operation is detected for 4 hours.Picture In Picture (PIP) PIP Menu → System → PIP You can watch a programme whose signal has passed through the TV’s tuner and watch video from one external video source simultaneously. If you have a Blu-ray player connected to the TV, for example, you can watch a TV programme and the Blu-ray movie at the same time by using the PIP feature. N While Smart Hub or Programme Rating Lock is on, you cannot use the PIP. ● PIP Activate or deactivate the PIP function. ● Channel Select the channel for the sub-picture screen. ● SizeSelect a size for the sub-picture screen. ● Position Select a position for the sub-picture screen. ● Sound Select You can choose to listen to the sound from the main picture or the sub picture. N If you turn the TV off while watching in the PIP mode, the PIP function is reset to Off. When you turn your TV on, you must turn PIP on again to watch in the PIP mode. N You may notice that the picture in the PIP screen becomes slightly unnatural when you use the main screen to view a game or karaoke. N PIP does not work when the 3D function is active. N PIP Settings: The picture from the external video source will be in the main screen and the picture from the TV’s tuner will be in the PIP subpicture screen. – Main picture: Component, HDMI – Sub picture: TVOther Features Language Menu → System → Language ● Menu Language Set the menu language. ● Teletext Language Set a desired language for teletext. N English is the default in cases where the selected language is unavailable in the broadcast.● Preferred Language Select a language, which will be the default language when a channel is selected. Device Manager Menu → System → Device Manager Using this function, you can set up a keyboard or mouse to use with the TV. You can view your device lists and adjust keyboard or mouse settings in this menu. N Depending on the model of the USB HID keyboard and mouse may not be compatible with your TV. N You can connect a keyboard and mouse at the same time. ● Keyboard settings Lets you use a USB or Bluetooth keyboard with your TV. for LED 6100- 7200 Series and PDP TV If you want to use a USB keyboard, connect it to the USB port. If you want to use a Bluetooth keyboard, connect it using the Bluetooth function. N Available only when the QWERTY keypad screen appears. Select keyboard Select which keyboard to use from your keyboard list. You can only use one keyboard at a time even if several are connected. Add Bluetooth Keyboard for LED 6100-7200 Series and PDP TV You can add a Bluetooth keyboard. Keyboard Options Sets the default options for the keyboard language and type. – Keyboard Language: Set a language for your keyboard. – Keyboard type: Set what a type of keyboard you're using to enter text. – Switch Input Language: Select a key sequence to change switching input language. ● Mouse settings Lets you use a USB or Bluetooth mouse with your TV. If you want to use a USB mouse, connect it to the USB port. for LED 6100-7200 Series and PDP TV If you want to use a Bluetooth mouse, connect it using the Bluetooth function. You can use a mouse in the TV's menu in the same way you use a mouse on your PC.Select mouse Select which mouse to use from your mouse list. You can only use one mouse at a time even if several are connected. Add Bluetooth mouse for LED 6100-7200 Series and PDP TV You can add a Bluetooth mouse. Mouse Options Sets the default options for the mouse buttons.– Primary Button: Select the main button you want to use to click and select on screen. – Pointer Size: Set the size of the onscreen mouse pointer. – Pointer Speed: Select the speed of the mouse pointer. Using the TV's menu with a mouse 1. Connect a USB or Bluetooth mouse on your TV.2. Click a primary button you selected. The Go To pop-up appears. 3. Click a menu you wish, and then you can use the menu to same way as on a PC. Subtitle (On-Screen Text Messages) Menu → System → Subtitle Use this menu to set the Subtitle mode. ● SubtitleSwitches subtitles on or off. ● Subtitle Mode Sets the subtitle mode. ● Subtitle Language Sets the subtitle language. N If the programme you are watching does not support the Hearing Impaired function, Normal automatically activates even if the Hearing Impaired mode is selected. N English is the default in cases where the selected language is unavailable in the broadcast. Digital Text for U.K Menu → System → Digital Text If the programme broadcasts with digital text, this feature is enabled. MHEG (Multimedia and Hypermedia Information Coding Experts Group): An International standard for data encoding systems used in multimedia and hypermedia. This is at a higher level than the MPEG system which includes data-linking hypermedia such as still images, character service, animation, graphic and video files as well as multimedia data. MHEG is user runtime interaction technology and is being applied to various fields including VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), teleeducation, tele-conferencing, digital libraries and network games. Screen Burn Protection for PDP TV Menu → System → Screen Burn Protection To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn prevention technology. Pixel Shift moves the picture slightly on the screen. The Pixel Shift Time setting allows you to programme the time between movements of the picture in minutes. Your TV also has the following additional screen burn protection functions: – Pixel Shift – Auto Protection Time – Scrolling – Side Grey ● Pixel Shift Using this function, you can set the TV to move pixels minutely on the PDP screen in a horizontal or vertical direction to minimize after images on the screen. Available Pixel Shift settings and optimum settings: Horizontal – Available Settings: 0 – 4 (pixels) – Optimum settings for TV/AV/ Component/HDMI: 4 Vertical – Available Settings: 0 – 4 (pixels) – Optimum settings for TV/AV/ Component/HDMI: 4 Time (minutes) – Available Settings: 1 – 4 min – Optimum settings for TV/AV/ Component/HDMI: 4 min N The Pixel Shift value may differ depending on the monitor size (inches) and mode.N This function is not available in the Screen Fit mode. ● Auto Protection Time If the screen displays a still image for a certain period of time you define, the TV activates the screen saver to prevent the formation of burnt in ghost images on the screen. ● Scrolling This function removes after-images on the screen by illuminating all the pixels on the screen according to a pattern. Use this function when there are after images or symbols on the screen, especially when you displayed a still image on the screen for a long time. N The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after-images on the screen. If the after-image is not removed after you apply the function, repeat the function. N Press any button to cancel this feature. ● Side Grey When you watch TV with the screen ratio set to 4:3, using the Side Grey function can prevent damage to the edges of the screen by adjusting the white balance on the extreme left and right sides.Auto Protection Time for LED TV Menu → System → Auto Protection Time If the screen displays a still image for a certain period of time you define, the TV activates the screen saver to prevent the formation of burnt in ghost images on the screen. General Menu → System → General ● Game ModeWhen you have connected a game console such as a PlayStation™ or Xbox™ to the TV, you can enjoy a more realistic gaming experience if you set the Game Mode on. Precautions and limitations for Game Mode – Before disconnecting a game console and connecting another external device, set Game Mode to Off.– If you display the TV menu in Game Mode, the screen shakes slightly. N Game Mode is not available when the input source is set to TV. N Set Game Mode to On only after connecting a game console. If you turn Game Mode on before you have attached the game console, you may notice reduced picture quality. N If Game Mode is set to On, Picture Mode is set to Standard and Sound Mode is set to Movie automatically. ● BD Wise for LED 4500 - 5700 Series : This function is not supported. Provides the optimal picture quality for Samsung DVD, Blu-ray, and Home Theatre products which support BD Wise. When the BD Wise is set to On, the picture mode is automatically changed to the optimal resolution. N Available when you connect Samsung products that support BD Wise through an HDMI cable to the TV. ● Menu Transparency Adjust transparency of menu box. ● Sound Feedback Your TV gives sound feedback when you use TV. Sound Feedback is enabled by default. Turn off Sound Feedback or adjust its volume. ● Panel LockLock or unlock all the keys on the TV Controller at once. When Panel Lock is on, the TV Controller does not operate. ● Boot Logo Displays the Samsung logo when the TV is turned on. Anynet+ (HDMI-CEC) Menu → System → Anynet+ (HDMI-CEC) Allows you to control all connected Samsung devices that support anynet+ with your Samsung TV’s remote. For details on set up options, refer to the “Anynet+ (HDMI-CEC)” instructions. DivX® Video On Demand Menu → System → DivX® Video On Demand Shows the registration code authorized for the TV. If you connect to the DivX web site and register with 10-digit registration code, you can download the VOD activation file. Once you play it using Media Play, the registration is completed. N For more information on DivX(R) VOD, visit http://vod.divx.com. Common Interface Menu → System → Common Interface ● CI Menu: This enables the user to select from the CAM-provided menu. Select the CI Menu based on the menu PC Card.● Application Info: View information on the CAM inserted into the CI slot and on the “CI or CI+ CARD” which is inserted into the CAM. You can install the CAM anytime whether the TV is on or off. 1. Purchase a CI CAM module at your nearest dealer or by phone. 2. Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the arrow.3. Insert the CAM with the “CI or CI+ CARD” into the common interface slot, in the direction of the arrow so that it aligns parallel with the slot. 4. Check if you can see a picture on a scrambled signal channel.Support Menu e-Manual Menu → Support → e-Manual The e-Manual is built into your TV. Open the e-Manual to learn how to use your TV are many features. N For the detailed information about the e-Manual Screen, refer to “How to view the e-Manual” in the User’s Manual.Self Diagnosis Menu → Support → Self Diagnosis ● Picture Test Use to check for picture problems. Picture Test displays a high definition picture that you can examine for flaws or faults. Yes: Select Yes if the test picture does not appear or there is noise or distortion in the test picture. There may be a problem with the TV. Contact Samsung’s Call Centre for assistance. No: Select No if the test picture displays properly. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual. ● Sound Test Use the built-in melody to check for sound problems. N If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV Speaker in the Sound menu, and then try the speakers again. N You will hear the melody during the test even if you have set Speaker Select to External Speaker or have muted the sound. Yes: Select Yes if you can hear sound from only one speaker or from neither speaker during the sound test. There may be a problem with the TV. Contact Samsung’s Call Centre for assistance. No: Select No if you can hear sound from the speakers. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual. ● Signal Information (Digital channels only)The reception quality of over-theair HD channels is either perfect or the channels are unavailable. Signal Information displays HD channel signal strength so you can adjust your aerial to increase signal strength and receive HD channels. ● Reset Reset all setting to factory defaults except for your network settings. To reset your TV to its default settings, follow these steps: 1. Go to the Reset menu. (Support → Self Diagnosis → Reset) 2. The PIN input screen appears. Enter the four digit security PIN using your remote. N If you have not changed the PIN, enter the default PIN, 0-0-0-0. You can change the PIN using the Change PIN option. (System → Security → Change PIN)3. When done, the PIN screen disappear. The message "All the settings will return to factory defaults." appears. 4. Select Yes. All settings are reset. The TV will turn off and on again automatically. The Setup screen appears. For more information about Setup, see the paper user manual. ● Troubleshooting If your TV seems to be having a problem, access the troubleshooting guide for a solution. Software Update Menu → Support → Software Update The Software Update menu lets you upgrade your TV’s software to the latest version. Current Version: This is the software version already installed in the TV. Upgrading to the Latest Version you can upgrade in five ways: – By USB – Online – By Channel – Alternative Software – Standby Mode Upgrade The five methods are explained in the following pages. N Be careful not to turn off the power until the upgrade is complete. The TV will turn off and on automatically after completing the software upgrade. When you upgrade software, all video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can easily reset them after the upgrade. ● By USB To upgrade the By USB, follow these steps:1. Visit www.samsung.com. 2. Click Support at the top of the page. 3. On the Support page, enter your model number in the Find Your Product field, and then press Enter or click Find Product. 4. Under Downloads on the left side, click Get downloads. The Download Centre screen appears. 5. Click Firmware on the left side of the page.6. On the Firmware tab, click the file icon on the right, and then click Save File on the pop-up that appears. 7. Extracts the exe archive to your computer. You should have a single folder with the same name as the exe file. 8. Copy the folder to a USB flash drive. 9. Turn on the TV, and then insert the USB flash drive into the USB port of the TV.10.In the TV’s menu, go to Support → Software Upgrade. 11.Select the By USB. N Please be careful not to remove the USB drive until the upgrade is complete. ● Online The Online function lets you download the upgrade software directly from the Internet into your TV and then upgrade the software in one operation. To use Online, you must have configured your TV to connect to your network and the TV must be connected to the Internet. See the "Setting up the Network" instructions. To upgrade using the Online, follow these steps: 1. Select the Online. The Connecting to Server message appears. 2. If there is a download available, the Download popup appears with a progress bar and the download starts. 3. When the download is complete, the Upgrade Query screen appears with three choices: Upgrade Now, Upgrade Later, or Don't Upgrade. – If you select Upgrade Now, the TV upgrades the software, turns off, and then turns on automatically. – If you do not make a selection in one minute or select Upgrade Later, the TV stores the new upgrade software. You can upgrade the software later using the Alternative Software function. – If you select Don't Upgrade, the TV cancels the upgrade. ● By Channel Upgrade the software using the broadcasting signal. N If the function is selected during the software transmission period, software will be automatically searched and downloaded. N The time required to download the software is determined by the signal status. ● Alternative Software The Alternative Software option lets you upgrade using a file the TV downloaded earlier, but you decided not to install immediately, or a file downloaded by the TV in Standby Mode (See Standby Mode Upgrade in the next section). To upgrade using Alternative Software, follow these steps: 1. If upgrade software has been downloaded, you will see the software version number to the right of Alternative Software. 2. Select Alternative Software.3. The TV displays a message asking if you want to upgrade. Select Yes. The TV begins the upgrade. 4. When the upgrade is complete, the TV turns off automatically, and then turns on. ● Standby Mode Upgrade You can set the Standby Mode Upgrade function so that the TV downloads new upgrade software when it is in Standby mode.In Standby mode, the TV is off, but its Internet connection is active. This allows the TV to download upgrade software automatically, when you are not using it. Because the TV is turned on internally, the screen may glow slightly. This phenomenon may continue for more than 1 hour until the software download is complete. To set Standby Mode Upgrade, follow these steps: 1. Select the Standby Mode Upgrade. 2. Select Off, 1 hour later, 2 hours later, 0:00, 2:00, 12:00 or 14:00. – Off: If you select Off, the TV will notify you with a pop up message when new upgrade software is available. – 1 hour later / 2 hours later / 0:00 / 2:00 / 12:00 / 14:00: The TV will automatically download new upgrade software when it is in Standby mode with the power off. N To use the Standby Mode Upgrade function, your TV must be connected to the Internet. Contact Samsung Menu → Support → Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centres and how to download products and software. Remote Management Menu → Support → Remote Management Remote Management lets our Call Centre access and control your Samsung Product remotely to troubleshoot a problem. Use Remote Management only when you have a problem, and contact our Call Centre first, before you activate Remote Management. You can find the current number of our Call Centre on the Support page at www.samsung.com under Contact support. Smart Hub Menu → Support → Smart Hub Smart Hub lets you connect to the Internet and enjoy a variety of Internet and multimedia contents. For more information on how to use the Smart Hub, see “Smart Hub” in the e-Manual.Using the 3D function for LED 4500 - 5700 Series : This function is not supported. 3D Menu → Picture → 3D This exciting new feature enables you to view 3D content. To fully enjoy this feature, you must need a pair of Samsung 3D Active Glasses to view 3D video. Advanced FeaturesIMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the TV’s 3D function. [ Warning Œ Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea and headaches. If you experience any such symptom, stop viewing 3D TV; remove the 3D Active Glasses and rest. Œ Watching 3D images for an extended period of time may cause eye strain. If you feel eye strain, stop viewing 3D TV; remove your 3D Active Glasses and rest. Œ A responsible adult should frequently check on children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest. Œ Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.) Œ Do not use the 3D function or 3D Active Glasses while walking or moving around. If you use the 3D function or 3D Active Glasses while walking or moving around you can injure yourself by running into objects, tripping, or falling. ● 3D Mode Select the 3D input format. N If you want to experience the 3D effect fully, put the 3D Active Glasses on first, and then select the 3D Mode from the list below that provides the best 3D viewing experience. Off : Turns the 3D function off. : Changes a 2D image to 3D. : Displays two images next to each other. : Displays one image above another. N The 3D Mode may differ depending on the input signal. N Some file formats may not support . ● 3D Perspective Adjusts overall 3D perspective of onscreen image. ● Depth Adjusts overall depth.● L/R Change Swaps the left and right pictures. ● 3D Optimisation for LED TV Automatically adjusts the picture overall to provide an optimal 3D effect. Support resolution (16:9 only) HDMI3D Format Resolution Frequency (Hz) / 1280 x 720p 50 / 59.94 / 60 Hz 1920 x 1080i 50 / 59.94 / 60 Hz 1920 x 1080p 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60 Hz Frame Packing 1280 x 720p 50 / 59.94 / 60 Hz 1920 x 1080i 50 / 59.94 / 60 Hz 1920 x 1080p 23.98 / 24 / 25 / 29.97 / 30 Hz Component Resolution Frequency (Hz) 1280 x 720p 50 / 59.94 / 60 Hz 1920 x 1080i 50 / 59.94 / 60 Hz 1920 x 1080p 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60 Hz DTVResolution Frequency (Hz) 1280 x 720p 50 / 59.94 / 60 Hz 1920 x 1080i 50 / 59.94 / 60 Hz 1920 x 1080P 25 Hz Videos / Photos (In AllShare Play) N Refer to "Supported Subtitle and AllShare Play file formats" in the Other Information section. Resolution supported for HDMI PC mode The optimal resolution for 3D in the HDMI PC mode is 1920 x 1080. If the input resolution is not 1920 x 1080, the TV may not display images properly in 3D display or full screen mode. How to watch the 3D images Some 3D modes may not be available depending on the format of the image source. To watch in 3D, you must wear 3D Active Glasses and turn the glasses on by pressing the power button. 1. Go to the 3D screen. (Picture → 3D) 2. Select the 3D Mode, The 3D Mode screen appears. 3. Select the 3D Mode option for the image you want to view. The screen goes blank for a moment, and then reappears in the 3D mode you selected.Read These Notes Before Using the 3D Function... Œ The 3D Mode is set to Off automatically when you access Smart Hub function. Œ The 3D Mode is set to its memorised configuration value automatically when you change the input source. Œ Some Picture functions are disabled in 3D mode. Œ PIP is not supported in 3D mode.Œ 3D Active Glasses from Samsung’s previous IR type 3D products and 3D glass from other manufacturers are not supported. Œ When the TV is initially powered on, it may take some time until the 3D display is optimized. Œ The 3D Active Glasses may not work properly if there is any other 3D product or electronic device turned on near the glasses or TV. If there is a problem, keep other electronic devices as far away as possible from the 3D Active Glasses. Œ Be sure to stay within the viewing angle and optimum TV viewing distance when watching 3D pictures. Otherwise, you may not be able to see 3D effects properly. Œ The ideal 3D viewing distance is three times or more the height of the screen. For example, if your screen is two feet high, you should sit at least six feet from the screen. We recommend sitting so that your eyes are level with the screen.Smart Hub Menu → Support → Smart Hub Using Smart Hub, you can stream movies, videos, and music from the Internet, access various for pay or freeof-charge applications and view them on your TV. Application content includes news, sports, weather forecasts, stock market quotes, maps, photos, and games. N You can also start this function by pressing the ™ button on the remote control. Notice Œ Samsung Electronics takes no legal responsibility for any interruption of the Smart Hub service caused by the service provider for any reason. Œ Application services may be provided in English only and the contents available may vary, depending on your area. Œ For more information about a Smart Hub service, visit the web site of the applicable service provider. Œ The Smart Hub service downloads and processes data via the Internet so that you can enjoy the Internet contents on your TV screen. If the Internet connection is unstable, the service may be delayed or interrupted. Furthermore, the player may turn off automatically in response to conditions on the Internet. If this occurs, check the Internet connection and try again. Œ The services provided are subject to change by the Smart Hub service provider without notice. Œ The Smart Hub service contents may differ depending on the player’s firmware version.To start Smart Hub for the first time, follow these steps: 1. Press the ™ button. 2. The Smart Hub screen appears. In a few cases, the Country screen appears immediately. 3. If the Country screen has appeared, select your country using your remote. N Some applications are available only in certain countries.4. The General Disclaimer screen appears. Select Agree. N Screens can take a few seconds to appear. 5. The Samsung Service Privacy policy screen appears. Select Agree. 6. The Update Pop-up appears. Select OK. 7. The Service Update screen appears and installs a number of services and applications. When done, it closes. The Smart Hub screen displays the downloaded applications and services. This may take some time. N Smart Hub may close momentarily during the installation process. N A number of screens may appear after installation. You can close them or let them close on their own. 8. To start an application, select an application using your remote.Using the Keypads and Keyboards A number of Smart Hub applications display a numeric keypad or a QWERTY keyboard so you can enter account names, passwords, and other data. In most applications, you can toggle between the numeric keypad and the QWERTY keyboard by selecting the b button.Using the Numeric Keypad When the keypad is displayed, you can use your remote to enter letters in lower or upper case, numbers, punctuation, and symbols. There are two ways to enter characters, in the ABC mode and in the XT9 mode. Method 1: Using the keypad of ABC type. Example: Inputting “105Chang”.1. Select the TTX/MIX key three times using your remote to change the input mode from lower case to numbers. 2. Select 1, 0 and 5 in numerical order on your remote. 3. Select the TTX/MIX key three times using your remote to change the input mode from numbers to upper case. 4. Select 2 three times using your remote to input C. 5. Input the rest of “Chang” using your remote in the same way. When done, select OK. Method 2: Using the Keypad of XT9 type. To change to XT9 mode, follow these steps: A.With the Numerical keypad displayed, open the Tools menu using your remote. B. On the Tools menu, select XT9 text input. C. Select On, and then select OK. Example: Inputting“105Chang”. 1. Select the TTX/MIX key three times using your remote to change the input mode from lower case to numbers. 2. Select 1, 0 and 5 in numerical order on your remote.3. Select the TTX/MIX key three times using your remote to change the input mode from numbers to capitalized case. 4. Select in sequence: 2, 4, 2, 6, 4. A thin window appears at the top of the screen displaying a list of words you can enter. Using the QWERTY Keypad If you have a USB or Bluetooth keyboard attached to the TV, and the screen is displaying the QWERTY keyboard, you can use the attached keyboard just like a regular keyboard. Type a character and the character appears on the screen. If you don't have a USB or Bluetooth keyboard attached and the QWERTY keyboard is displayed, use your remote to highlight and then select letters, numbers, and symbols on the keyboard one at a time. N Select the Caps or Shift button to display Capital letters. Select again to re-display lower case. N Select the 1 button to display symbols and icons. Select again to re-display letters. N If XT9 text input is On, words will appear in a ribbon at the top of the page. Select the } button to select a word in the ribbon.Using the coloured and function buttons with the QWERTY Keypad ● a Delete All Delete all inputted character. ● b Numeric / QWERTY Toggles the keypad mode between Numeric keypad mode and QWERTY mode. N When the keypad is set to QWERTY mode, you can input characters using a USB or Bluetooth keyboard connected on the TV. ● { Space You can enter a space character. ● T Settings Displays the options menu. Input Language: Select an input language. XT9 text input: Turns the XT9 word function on or off. Available in both Numeric Keypad and QWERTY mode when you use the remote or a mouse to select and enter characters. ● E Enter Enter the selected character. ● R Return Return to the previous menu. ● π Prev Page Display the previous set of symbols/ icons. N Available only when the keypad screen is in symbol/icon mode ( ). ● µ Next Page Display the next set of symbols/ icons. N Available only when the keypad screen is in symbol/icon mode ( ). Creating an Account To establish your own, exclusive configuration of Smart Hub, create your own Samsung Account. N You must use an e-mail address as an ID. N You can register up to 10 User Accounts. N You do not need an account to use Smart Hub. To create an account, follow these steps:1. On the Smart Hub screen, select a using your remote. The Login screen appears. 2. Select Create Account using your remote. The Create Account screen appears. 3. Select Samsung Account. An entry screen and keypad appear. 4. Use the keypad to enter your e-mail address. This will serve as your ID. N If you have a Bluetooth or USB keyboard attached to the TV, use the keyboard to enter the e-mail address. Then, in Steps 6 through 10, use the keyboard to enter the required password. Note that after you type in the e-mail address and password, you will need to use your remote to continue. 5. When done, select OK. The Login screen reappears. 6. Select Password. The Passwordscreen and a keypad appear. 7. Use the keypad to enter a password. The password can be any combination of letters, numbers, and symbols. N Select a using your remote to display or hide the password as you enter it. 8. When done, select OK. 9. Select Confirm Password. The Password screen and a keypad re-appear. 10.Repeat Steps 7 and 8. 11.When done, select Create Account. The Confirmation window appears. 12.Select OK. The Continue to register service ID window appears. 13.Select OK. N If you don’t have existing provider accounts or do not want to register existing accounts at this time, select Cancel. You can also let the window close on its own in about a minute. 14.The Register service account window appears. N If you have existing accounts with any of the listed providers, you can associate the provider account and the provider account password with your Samsung Account. Registration makes it easier to access the provider’s web site. For registration instructions, go to Step 2 in Account Manager under Settings in the “Configuring Smart Hub with Settings” section of this manual.Customizing the Home Screen ● a Login / Logout To log in to your Samsung Account, follow these steps: 1. With the Smart Hub main screen displayed on your TV, select a using your remote. The Login screen appears. 2. Select the ^ next to the Samsung Account entry filed. A drop down list appears. N If you want to input your Samsung Account name manually, select the Samsung Account entry field. A keypad screen appears. Input your Samsung Account manually. When done, go to Step 4. 3. Select your ID from the list that appears. The Login screen reappears. 4. Select Password. The Passwordwindow and a keypad appear. 5. Enter your password using your remote. When done, select OK. N If you want Smart Hub to enter your password automatically, select Remember my password. after you have entered your password. A c mark appears. Smart Hub will now enter your password automatically when you select or enter your ID. N If you want to log in to Smart Hubautomatically when Smart Hub function starts, select Sign me in automatically. A c mark appears. N If you forget your Samsung account password, you can reset it. Select b using your remote. A popup message appears. Select OK. Smart Hub will send a guide to your e-mail address that explains how to reset your password. ● b WallpaperYou can change the background image on the Smart Hub home screen. ● { Account Manager Lets you register your service provider accounts, delete or deactivate your Samsung account. For more information about Account Manager, see "Configuring the Smart Hub with the Settings Menu" in this section. N Available only when you have logged in to Smart Hub.Using the Tools menu with Smart Hub N Depending on the icons and folders displayed on the Smart Hub screen, some of the functions listed below may not appear. ● Login / Logout Log in or log out of your Samsung Account. ● Wallpaper You can change the background image on the Smart Hub home screen. ● Move The Move function lets you change the screen position of an application or a folder. To use the Move function, follow these steps: 1. Select an application icon or a folder, and then open the Tools menu using your remote.2. Select the Move. A position change screen appears. 3. Move the icon using your remote. When the icon is in the position of your choice, select the icon. The application icon moves to its new location. ● Move to Folder The Move to Folder function lets you move an application to a folder.To use the Move to Folder function, follow these steps: 1. Select an application, and then open the Tools menu using your remote. 2. Select the Move to Folder. The Move to Folder window opens. 3. Select a folder using your remote. A move finished message appears. Select OK. The message window closes. The application has been moved to the folder.N If you select an application in a folder, you can use the Move to Folder to move the application to the Smart Hub screen. To access an application in a Folder 1. On the Smart Hub screen, select a folder. The folder opens. 2. Select an application you want to execute. The application service starts.● Delete The Delete function lets you delete applications from Smart Hub. To use the Delete function, follow these steps: 1. Select an application, and then open the Tools menu using your remote. 2. Select the Delete. The message Do you want to delete the selected item(s)? appears.3. Select OK. The application is deleted. ● New Folder The New Folder function lets you create and name new folders. You can move applications into the folders you have created. To use the New Folder function, follow these steps: 1. Open the Tools menu using your remote.2. Select the New Folder in the menu. The New Folder pop-up and a keyboard screen appear. 3. Using the keyboard and your remote, enter a name for the folder. 4. When done, select OK. The New Folder screen closes and the New Folder appears on the Smart Hub screen. ● Rename Folder The Rename Folder function lets you rename folders. To use the Rename Folder function, follow these steps: 1. Select a folder, and then open the Tools menu using your remote. 2. Select the Rename Folder. The Rename Folder window and a keyboard screen appear. 3. Enter a new name using your remote or edit the old name.4. When done, select OK. The Rename Folder window closes and the new or revised name appears below the folder. ● Lock The Lock function lets you lock some applications in Smart Hub so they cannot be opened without entering the password. To use the Lock function, follow these steps: 1. Select an application, and then open the Tools menu using your remote. 2. Select Lock. The Security window appears. 3. Enter your security PIN using the remote. If you have not created a PIN, enter “0-0-0-0”. 4. A confirmation message screen appears. Select OK. The message screen closes and a lock symbol appears to left of the application. ● Unlock To use the Unlock function, follow these steps: 1. Select a locked application, and then open the Tools menu using your remote. 2. Select Unlock. The Security window appears. 3. Enter your security PIN using the remote. If you have not created a PIN, enter “0-0-0-0”. 4. A confirmation message screen appears. Select OK. The message screen closes and the lock symbol to left of the application disappears. ● Information Depending on application, you can view the detailed information about the selected application. N You can also lock or unlock the application on the Detailed Information screen. Configuring Smart Hub with the Settings Menu The Settings menu gives you access to Account Manager, Service Manager, Reset, and About Smart Hub functions. To use these three functions, you must be logged into your Samsung Smart Hub account.To access the Settings menu, and then select a menu item, follow these steps: 1. Open the Tools menu using your remote. 2. Select Settings. The Settings window appears. 3. Select a menu item using your remote. ● Account Manager The Account Manager menu contains functions that let you register your service provider accounts and delete or deactivate your Samsung Account. Link to other accounts: If you have existing accounts with any of the providers listed by the Link to other accounts function, you can associate the provider account and the provider account password with your Samsung Account. If you associate the account, you will be able to log onto the account through Smart Hub easily, without entering your account name or password. N Before register your site account, corresponding application should be installed in the Smart Hub. To use the Link to other accounts function, follow these steps: 1. In the Account Manager menu, select the Link to other accounts. The Link to other accounts window appears. 2. Select an application you want to associate with your Samsung Account. 3. In the pop-up that appears, select Register. 4. In the Link to other accounts entry screen, enter your site ID and password using your remote. When done, select OK. N This is the ID and password you normally use to access your account on this application. 5. If you have entered the ID and password correctly, the Registered successfully. message appears. 6. If want to add another service application, and then repeat Steps 2 through 4 to associate another service application. 7. When done, select OK.Remove from TV account list: Cancels all the currently registered Service Accounts that appear on the Register service account screen. Deactivate account: Deactivates your Samsung Account and deletes it and all your account settings entirely from the Smart Hub. ● Service Manager Auto Ticker: You can set Auto Ticker to come on when the TV powers. N The Ticker application provides useful News, Weather, and Stock Market information. Before you can set the Auto Ticker on, you must download the Ticker application into Smart Hub. N Depending on your country, the Ticker application may have a different service or not be supported. Push Notification Settings: When on, Push Notification that displays a notification message when an event takes place in an application installed on Smart Hub. The TV will display the notification message and allow you to view details of the event even while you are viewing TV. ● Reset The Reset function initializes all downloaded applications, erases all user accounts and settings from the TV, and resets all Smart Hub settings to the factory default settings. It then restarts Smart Hub as if it were starting for the first time. Your account, however, remains on the Smart Hub server. To log into your account, enter your ID and password on the Login screen. To use the Reset function, follow these steps:1. In the Settings menu, select Reset. The Reset screen appears. 2. Enter security PIN using your remote. 3. After a few moments, Smart Hub automatically resets. The screen may go black, and then Smart Hub reappears. In a few moments, it starts the re-initialization procedure. 4. To complete the re-initialization, go to Step 2 in "To start Smart Hub for the first time, follow these steps:" section of this manual. ● About Smart Hub The About Smart Hub menu contains functions that display information about Smart Hub. More: Lists information about Smart Hub including version number, the number of services installed, memory usage, and the unique product ID. Terms of Service Agreement: Display the Terms of Service Agreement.Using Samsung Apps Samsung Apps ™ → Samsung Apps Samsung Apps is a store from which you can download applications to use on Samsung TV/AV equipment. You can enjoy a variety of contents such as videos, music, photos, games, useful information etc. using the downloaded applications.New applications are added regularly. Using the coloured and function buttons with Samsung Apps ● a Login / Logout Log in to or log out of your Samsung Account. ● b Filter by Price To toggle the view between All, Paid and Free. ● { SortTo sort the applications by Recommended, Name, Date or Downloaded. N You can sort all categories except Most Popular. ● } View Mode Each time you select } using your remote, the View Mode toggles between basic mode and thumbnail mode. ● π PreviousMove to previous page. ● µ Next Move to next page. ● T Tools Displays the option menu. ● R Return Moves to previous menu. Using Samsung Apps by category The following categories are available: ● Most PopularDisplays the most popular applications for users. ● Video Includes apps that provide video media such as movies, TV shows, and short length videos. ● Game Includes various game apps such as sudoku and chess. ● Sports Includes apps that provide sports content such as game results, images, and short length video. ● Lifestyle Includes apps that provide lifestyle media services such as music, personal photo management tools, and social networking such as Facebook and Twitter. ● Information Includes apps that provide information content such as news, financial information, stock quotes, weather, etc. ● Education Includes apps that provide education content such as story books, dictionary, VOD (Video on Demand) for kids etc. ● My Apps My Apps provides information about your available App cash coupon and information about the apps you have already purchased or installed on your TV.N You can purchase App cash that you can use to buy applications through tv.samsungapps.com. N Downloaded apps displays the list of free apps that are installed on the TV. ● Help If you have questions about Samsung Apps, check this section first. To search for an application in Samsung Apps, follow these steps: 1. On the Samsung Apps screen, select Search Samsung Apps. The Search window and keyboard appears. 2. Enter a keyword using your remote. The keyword should be part of the name of an application. For example, enter f-a-c-e to search for Facebook. 3. When done, select OK at the bottom of the keyboard. 4. Wait until the search result screen displays. After Samsung Apps displays the results, you can select an application you want in the search result screen. N You can find a keyword in the search history If you have searched using that keyword before. N If you have a keyboard and/or a mouse connected to your TV, you can use the mouse to select the Search Samsung Apps field and the keyboard to type in the keyword.Search ™ → Search (May not be available, depending on your country.) Easily search for and access content from diverse sources (e.g. applications, Your Video, AllShare Play) 1. On the Smart Hub, select Search at the top of the screen or press the Search button on your remote. 2. If you want to input a search term directly, select Enter search keyword. entry field A keypad screen appears. Enter the search term using your remote. N If you want to search by category, select a category below the field using your remote. Using the Search function by category ● Your Video Personalize your movie-watching with a customized video on demand (VOD) recommendation service. ● Most searched You can search by selecting a key word in the key word list. The key word list displays words you frequently use for searches. ● Top application You can search applications and services in the application list. The application list displays apps that users download frequently. ● Search history Lets you delete previously used keywords from the search history list. Also, If you select Delete All, you can delete all your search history. Using the coloured and function buttons with Search ● b Refresh Refresh the Search function.● T Tools You can set general parameters for the Search function or delete the search history. ● R Return Return to the previous menu. Using the Tools menu with Search ● General Settings Keyword recommendation: Turns the Keyword Recommendation function on or off. Search area: Sets a search scope. The default is allowed all application. To customize a search area, follow these steps: 1. On the Search screen, open the Tools menu using your remote. 2. Select General Settings. 3. Select an application in the Search area. A c mark disappears from the check box.N When you remove the c mark, you remove that application from the search scope. Only checked applications are included. 4. When done, press the RETURNR button. ● Search history Lets you delete previously used keywords from the the search history list. Also, If you select Delete All, you can delete all your search history.To delete a search history keyword, follow these steps: 1. On the Search screen, open the Tools menu using your remote. 2. Select Search history. 3. Select a keyword in the Keyword list. 4. Press the E button. The keyword disappears from the list.Your Video ™ → Your Video (May not be available, depending on your country.) Using this service from Smart Hub, you can get video recommendation, search for movies from multiple providers, and stream or purchase movies. To stream or purchase movies, you must have the vendors app installed in Smart Hub. Depending on the vendor, you may also need a vendor account. Using the Your Video Search Tab 1. On the Smart Hub screen, select Your Video. 2. If this is the first time you have accessed Your Video, the Privacy Notice appears. Read the notice, and then select Agree. 3. When the Your Video screen appears, it displays a list of recommended movies with Recommended at the top of the screen highlighted. Move the highlight from the top of the screen down to the first movie, and then scroll the movies to the right to view all the movies in the list. 4. To see additional lists of movies, move the highlight back to the top of the screen. You can select - in addition to Recommended - New releases, Top 20 films, Top 20 TV shows, and From friends. 5. To select a movie, highlight it, and then press the E button. The movie's Data screen appears. On this screen you can view Basic Information, Director/Cast, Photos, Awards, and Related Movies. 6. To watch the movie, select Watch. A list of online vendors that have the movie available for rent or purchase appears. Renting usually means you can stream the movie for a certain number of hours or days. N To go to a vendor's web site, you must have that vendor's app installed in Smart Hub. To install apps, access Samsung Apps on the main Smart Hub screen. 7. You can search for a particular movie. To search, select { with your remote. The Search Entry screen and a keyboard appear.8. Enter the name of the movie into the Search field. As you enter characters, the Search function will display suggestions below. You can either continue entering characters, or, if your movie appears, move the highlight down and select it. The movie's Data screen appears (See Steps 5 and 6). N If you are entering using a keyboard, you can either press Enter or you can move the highlight down using the down arrow key. Using the Function and Coloured Buttons on the Search Tab ● a Login / Logout To login to your Smart Hub account or log out. ● { Search To search for movies or videos (Steps 7 and 8). ● T My Page Displays your My Video Bookmarks, Likes/Shares (if you have a Facebook or Twitter account registered in Smart Hub), and lets you establish certain Preferences. ● R Return Return to the previous menu. Using Function and Coloured Buttons on a Movie's Data Page ● a Login / Logout ● To log in to your Smart Hub account or log out. ● b Bookmark / Unbookmark To bookmark a movie or video or to remove the bookmark. When you bookmark, Bookmark appears on the left side of the screen. Bookmarked movies or videos are listed on My Page.● { Search To search for movies or videos (Steps 7 and 8). ● } Home To go to the My Video Home screen. ● T My Page Displays your My Video Bookmarks, Likes/Shares (if you have a Facebook or Twitter account registered in Smart Hub), and lets you establish certain Preferences.● R Return Return to the previous page or menu. Using the Your Video Genre Tab When you start Your Video, the Your Video screen displays the Search tab. You can also display the Genres tab which sorts movies and videos by genre. 1. On the Your Video Search tab, move the highlight to the bottom of the screen, and then select Genres. The Genres tab appears. 2. On the Genres tab, select either Movies or TV show on the left side of the screen. 3. On the right side of the screen, select the genre (Action/adventure, Animated, etc.). Your Video displays the Genre Movie or TV Show List screen with the movies or TV shows in the genre you selected.4. Highlight a movie or TV show and then select it. The Data screen for that movie or TV show appears. Using the Function and Coloured Buttons on a Genre Movie or TV Show List Screen ● a Login / Logout To log in to your Smart Hub account or log out. ● b GenresTo re-display the Genres tab. ● { Search To search for movies or videos. ● } Sort To sort movies or videos by Ratings, Year, or Title. ● T My Page Displays your My Video Bookmarks, Likes/Shares (if you have a Facebook or Twitter account registered in Smart Hub), and lets you establish certain Preferences. ● R Return Return to the previous page or menu. Using My Page My Page displays your My Video Bookmarks, Likes/Shares (if you have a Facebook or Twitter account registered in Smart Hub), and lets you establish certain Preferences. When the T My Page icon is displayed at the bottom of a screen, select or press T. My Page appears displaying your bookmarked movies and videos. Select a bookmarked movie or video, access your Likes/Shares, or view or change your Preferences. Using the Function and Coloured Buttons on the My Video Screen ● a Login / Logout To log in to your Smart Hub account or log out. ● { Search To search for movies or videos. ● } Home To go to the My Video Home screen. ● R Return Return to the previous page or menu.Family Story ™ → Family Story Family Story feature allows you to share photos, messages, and events with your family. ● Create Group If you are starting Family Story for the first time, you can create a family group and invite members to join. ● Invite Members After creating a group, you can invite the family members who you want to share your family's photos and events with to join. ● Join Group If you were invited to join a family group by a family member, you can select Join Group to enjoy Family Story services. N You must be logged into your Smart Hub account to create a family group, access your group, or use Family Story. To create a family group, follow these steps: 1. On the Smart Hub screen, select Family Story. The Family Story screen appears. 2. Select Create Group. The Create and invite pop-up appears. 3. Select OK. The Family Story agreement appears. Read the agreement, and then select Agree. N It is required to agree with the terms prior to using Family Story. 4. Enter a Group Name, Your Name, and Your Phone Number without dashes using your remote. N If you want to add a group image, select an image box. (An external device containing photos must be connected to your TV via USB.) N * Fields marked with an asterisk are required. 5. When done, select Done. The group creation is completed. N If you want to invite members to your group, select Invite Members. If you want to go your Family Story, select Go to Family Story. If you selected Invite Members, go to Step 4 in the procedure below. To invite members to your Family Story group, follow these steps: 1. From the starting menu in Family Story, open the Tools menu using your remote, and then select Group Members. The Group Members screen appears. 2. Select Invite Members. The Invite pop-up appears. 3. Select OK. The Invite Members screen appears. 4. Select Select to enter message.. The keypad screen appears. 5. Enter message using your remote. When finished, select OK on the bottom of the keyboard, and then select Done. 6. Select Phone number or Samsung account ID. The keypad screen reappears. 7. Enter the prospective member's phone number or Samsung account ID using your remote. When finished, select OK on the bottom of the keyboard, and then, select Done. N If you want to add more prospective members, select Add Member, and repeat Steps 4 through 7. 8. When finished adding members, select Done. The Member Invitation Completed screen appears. 9. If invited by phone number, 4-digit invite code will be generated and the code needs to be shared with the member. If invited by Samsung Account, the member will be notified about the invitation via e-mail. Select OK to finish. To join a group using the received invite code, follow these steps: 1. Start Family Story and accept the terms. 2. You will see a pop-up message asking about invitation type. If you were invited by phone number, please select Invite Code. If you were invited by Samsung account, please select Samsung Account. 3. If joining by Samsung Account, a list of invitations from your family groups will be displayed. Select Accept to join. You can select Deny if you don't want to join the inviting group.4. If joining by Invite Code, first enter your phone number using your remote. When done, select Done. Then you will see a list of invitations from your family groups. Select Accept to join. You can select Deny if you don't want to join the inviting group. Enter the 4-digit invite code shared by your family member, and then select Done to finish. 5. Select OK. Joining your family group has been completed. Creating an Album You can upload pictures from a USB device and create a picture album which other group members can view and add to. To create a picture album, follow these steps: 1. Attach a USB device containing the pictures you want to upload to the picture album to your TV. 2. Log into your Smart Hub account, and then start Family Story. 3. Highlight and select the "create album" icon on the left side of the Family Story screen or select b Create using your remote. The Create screen appears. 4. Highlight and select Add on the Album tab. The File Browser screen appears. 5. Highlight and select the USB device. The device opens, displaying either folders or picture files. 6. If picture files are displayed, highlight and select each file you want to upload. A check appears on each file. 7. If folders are displayed, highlight and select the folder that contains the pictures you want to upload. Then, select each file you want to upload. A check appears on each file. N You can highlight and select the Select All button on the right side if you want to select all displayed pictures. 8. When finished, highlight and select the OK button on the right side. The Create screen re-appears displaying some or all the photos you want to upload.N To delete a photo from the upload queue, select T Tools. In the Tools menu, select Delete Photos. Either highlight and select individual photos or select Delete All. When done, select the Delete button on the bottom of the page. A pop-up appears asking whether you want to delete the photos. Select Yes. 9. Highlight and select the Done button on the bottom of the screen. The photos are uploaded, and then the Story of the Day screen appears, displaying the photos. 10.Select R Return. The Cover Story (Main Family Story) screen appears displaying the photos. N The Cover Story screen runs a continuous slide show of photos you uploaded. It also displays some of the photos on a "shelf" below the slide show area. Deleting a Picture To delete a picture, follow these steps: 1. On the Cover Story screen, highlight and select the strip of photos on the bottom left. The Story of the Day screen appears. 2. Highlight and select the photo you want to delete.3. Select T Tools. 4. In the Tools menu, select Delete. A message appears asking if you want to delete the photo. 5. Select OK. The picture is deleted. Editing a Picture The Edit function lets you add a memo to a picture or add the picture to an event.To edit a picture, follow these steps: 1. On the Cover Story screen, highlight and select the strip of photos on the bottom left. The Story of the Day screen appears. 2. Highlight and select the photo you want to edit. 3. Select T Tools. 4. In the Tools menu, select Edit. The Edit screen appears. 5. To add a memo, highlight and select the "enter Memo" field. The Enter Memo screen and keyboard appear. 6. To add the picture to an event, highlight and select Find event. The Events list screen appears. Use the left and right arrow buttons to change the month. Use the up and down arrow buttons to select an event. Press Enter when done. 7. After you have added a memo or added the photo to an event, highlight and select Done on the bottom of the screen. Creating a Memo You can create a memo that all group members can see. To create a memo, follow these steps: 1. Log into your Smart Hub account, and then start Family Story. 2. Highlight and select the "create memo" display on the right side of the Family Story screen or select b Create using your remote. The Create screen appears. 3. On the Memos tab, highlight and select the "enter Memo" area. The Enter memo screen and keyboard appear. 4. Use your remote to highlight and select letters. If you have a USB or Bluetooth keyboard attached to the TV, use the Keyboard to type in letters. 5. When done, select OK on the on screen keyboard, press the E button. If you are using a physical keyboard, press the Enter key on the key board. The Create screen reappears displaying the memo. N To edit the memo, highlight and select the "enter Memo' area again. The Enter memo screen and key board re-appear. 6. Highlight and select the Done button on the bottom of the screen. The Story of the Day screen appears displaying the memo. 7. Select R Return to go back to the main Family Story screen. Deleting a Memo To delete a memo, follow these steps:1. On the Cover Story screen, highlight and select the memos on the right side of the screen. The Story of the Day screen appears. 2. Highlight and select the memo you want to delete. 3. Select T Tools. 4. In the Tools menu, select Delete. A message appears asking if you want to delete the memo. 5. Select OK. The memo is deleted.Editing a Memo To edit a memo, follow these steps: 1. On the Cover Story screen, highlight and select the memos on the right side of the screen. The Story of the Day screen appears. 2. Highlight and select the memo you want to edit. 3. Select T Tools.4. In the Tools menu, select Edit. The Edit screen appears. 5. Highlight and select the Edit field. The Memo screen and keyboard appears. Edit the memo, and then press Enter when done. 6. The Edit screen re-appears. Highlight and select Done on the bottom of the screen. Creating an EventYou can create a record of an event, such as a birthday party or a wedding, with pictures, that all group members can see. You can also create a record for a future event. To create an event, follow these steps: 1. Attach a USB device containing the pictures of the event that you want to upload to your Family Story. 2. Log into your Smart Hub account, and then start Family Story. 3. Highlight and select the "create event" display on the right side of the Family Story screen or select b Create using your remote. The Create screen appears. 4. On the Event tab, highlight and select the Event title field. The Event Title screen and keyboard appear. 5. Use your remote to highlight and select letters. If you have a USB or Bluetooth keyboard attached to the TV, use the keyboard to type in letters. 6. When done, select OK on the on screen keyboard, press the E button. If you are using a physical keyboard, press E on the keyboard. 7. Highlight and select Done on the Event Title screen with your remote. The Event Tab reappears. 8. User your remote to highlight and select the "Enter Description" field. The Enter Description screen and keyboard appear. 9. Enter a description of the event the same way you entered the Event Title in Step 5. When done, close the Enter Description screen the same way you closed the Event Title screen in Steps 6 and 7. 10.Highlight and select the From field. The Time Settings screen appears. Use the up and down arrow buttons on your remote to change the values in each field. Use the left and right arrow buttons to move from field to field. Press Enter when done. 11.Highlight and select the to field. The Time Setting screen appears. Set the To time the same way you set the From time in Step 10. 12.To define the Event Type, highlight and select the Change button. The Event Type list appears. 13.Use the up and down arrow buttons on your remote to select an event type. When done, press the E button. The Event Tab re-appears. 14.To add photos, highlight and select the Add button. The File Browser appears. 15.Highlight and select the USB device. The device opens, displaying either folders or picture files.16.If picture files are displayed, highlight and select each file you want to upload. A check appears on each file. 17.If folders are displayed, highlight and select the folder that contains the pictures you want to upload. Then, select each file you want to upload. A check appears on each file. N You can highlight and select the Select All button on the right side if you want to select all displayed pictures. 18.When finished, highlight and select the OK button on the right side. The Event Tab re-appears displaying some or all the photos you want to upload. N To delete a photo from the upload queue, select T Tools. In the Tools menu, select Delete Photos. Either highlight and select individual photos or select Delete All. When done, select the Delete button on the bottom of the page. A pop-up appears asking whether you want to delete the photos. Select Yes. 19.When done entering all information and selecting all photos, highlight and select the Done button at the bottom of the Event Tab. Family Story uploads the photos you selected and then displays the Story of the Day screen. 20.Select R Return to go back to the main Family Story screen. Deleting an Event To delete an event, follow these steps: 1. On the Cover Story screen, highlight and select the events on the bottom right side of the screen. The Story of the Day screen appears. 2. Highlight and select the event you want to delete. 3. Select T Tools. 4. In the Tools menu, select Delete. A message appears asking if you want to delete the event. 5. Select OK. The event is deleted. Editing an EventTo edit an event, follow these steps: 1. On the Cover Story screen, highlight and select the events on the bottom right side of the screen. The Story of the Day screen appears. 2. Highlight and select the event you want to edit. 3. Select T Tools. 4. In the Tools menu, select Edit. The Edit screen appears. 5. Edit the elements in the event in the same fashion you first entered them. 6. To remove a photo, highlight the photo, and then Select T Tools. 7. In the Tools menu, select Disconnect photos. 8. Highlight and select individual photos or highlight and select Select All. 9. Highlight and select Delete. A message appears asking if you want to delete the photos. Select Yes. 10.When finished editing, highlight and select Done at the bottom of the page. Functions on the Cover Story (Main) Screen On the Cover Story screen, you can launch a slide show, display individual pictures, view memos, and view events. Launching a Slide Show 1. On the Cover Story screen, highlight and select the large Slide Show area. This is the portion of the screen that displays constantly changing pictures. The slide show starts. The slide show controls are displayed momentarily, then disappear. 2. To stop or start the slide show and to re-display the controls, press Enter on your remote. 3. To view individual pictures, stop the slide show, and then press the left or right arrow button on your remote. 4. To change the speed of the slide show, select the πor µ button. 5. To end the slide show, select R Return. Viewing Individual Pictures 1. On the Cover Story screen, highlight and select the strip of photos on the bottom right. The Story of the Day screen appears displaying the individual photos. 2. Highlight and select a photo. The individual photo is displayed. ● To add a comment about the photo, highlight and select the Add Comment button or select b Add Comment. The Comment screen and keyboard appear. ● To watch a slide show that includes the picture, highlight and select the picture. The slide show begins. ● To watch a slide show together with another member of your group, select { Watch together now. This function lets you and another member of your group watch the same slide show on your own TVs, even if you are thousands of miles apart. Viewing Individual Memos 1. On the Cover Story screen, highlight and select the memos displayed on the right side. The Story of the Day screen appears displaying the individual memos. 2. Highlight and select a memo. The individual memo is displayed. ● To add a comment about the memo, highlight and select the Add Comment button or select b Add Comment. The Comment screen and keyboard appear. Viewing Individual Events 1. On the Cover Story screen, highlight and select the events displayed on the right side. The Story of the Day screen appears displaying the individual events. 2. Highlight and select an event. The individual event is displayed. ● To add a comment about the event, highlight and select the Add Comment button or select b Add Comment. The Comment screen and keyboard appear.● To watch a slide show of the pictures saved in the event, highlight and select the pictures at the bottom left of the screen. The slide show begins. The Tools Menu Functions The Tools Menu appears on most of the Family Story screens. This section provides a run down of all the Tools Menu functions by screen. Tools Menu Functions on the Cover Story Screen Group Members: Lists the current group members and the current prospective members with invitations. My groups: Lists the groups you are a member of. Also lets you access your groups. Settings: Lets you edit your profile information and set whether your group will allow new content, new members, new invitations, and issue event reminders. Logout: Logs you out of Family Story and your Smart Hub account. Returns you to the Smart Hub screen. Create: Takes you to the Create screen where you can create a photo album, memo, or event record. Updates: Lets you know if there is an update for the Family Story application, and lets you download and install it.Tools Menu Functions on the Story of the Day Screen Filter: Lets you select what to view on the Story of the Day screen by category: All, Album, Memos, Event. View by Member: Lets you view entries (Albums, Memos, Events) by member. The rest of the functions - Group Members, My groups, Settings, Logout, and Updates - are the same functions as the Cover Story screen functions.Other Functions on the Story of the Day Screen The Story of the Day screen also has a date filter function on the bottom of the screen. Date created / Date Uploaded: You can sort the items on the Story of the Day screen by Date created or Date Uploaded by highlighting and then selecting the Date created / Date Uploaded slider button. You can also quickly move to the month certain items occurred or were uploaded by selecting a highlighted number on the monthly number bar. You can also select a year, and then a month. When you select a month, Family Story displays the items that were uploaded or occurred in that month.Fitness ™ → Fitness The Fitness application provided by Smart Hub lets you track and manage a fitness and exercise programme you create. N To use Fitness, you should be logged in the Smart Hub. Read these notes before exercising... N Please warm-up or stretch before exercising. N Stop exercising immediately if you feel pain, or dizzy, exhausted, or short of breath. Create Your Profile When you start Fitness for the first time, you should create your own profile. On the Fitness screen, select Create your profile. A pop-up message appears. Select Create your profile. The Personal Trainer/Create Profile screen appears. 1. To go to next step, press the right arrow button. The Name pop-up appears. 2. Select First Name. The Username screen and keyboard appear. Enter your name. When done, Select OK. 3. Select Last Name. The Username screen and keyboard re- appear. Enter your last name. When done, Select OK. 4. Press the right arrow button on your remote. The Gender pop-up appears. 5. Highlight and select your gender. When you select our gender, you will see a black dot appear in your selection. 6. Press the right arrow button on your remote until the Date pop-up appears. 7. Enter your birth date using your remote. It will be used to personalize some parameters for you. 8. Press the right arrow button remote. The Units pop-up appears. 9. Select your preferred units. The selected units will be applied throughout the Fitness app. Move to the right again. The Height pop-up appears. 10.Enter your height. This will be used to calculate your body mass index (BMI). Move to the right again. The Weight pop-up appears. 11.Enter your weight. This will be used to calculate your body mass index (BMI). Move to the right again. The application calculates your BMI. 12.The creation of your profile is finished. The TV displays your profile information and BMI. To start the Fitness app, select Enjoy Fitness.Using Fitness with categories ● Exercise Provides information on your exercise goal, current status and recommended contents. ● Progress Provide information on your basic body profile, exercise progress, achievement of your goals, etc. ● Edit Edit lets you change or adjust your fitness goals. Selecting Exercise Programs Fitness displays a number of exercise videos and programs you can use to help you reach your fitness goals. Each of these videos and programs must be downloaded from Samsung Apps. Videos labeled VOD (Video on Demand) are part of a group of free exercise videos. We suggest you download those first. To download a VOD programme or video, follow these steps; 1. On the Fitness screen, highlight and select a program. A message appears asking you if you want to go to Samsung apps. 2. Select Yes. The Samsung Apps screen appears. N This may take a few minutes.3. If this is the first time you have download a VOD programme or video, you will be directed to download the VOD video app that lets you download and play all the VOD exercise videos. 4. Follow the directions on the screen to download the VOD video app. 5. After the video app has been downloaded, press RETURNR several times to go back to the Fitness screen. 6. You can now select and play any of the VOD videos. N As you play these videos, Fitness notes the video you are using and calculates the number of calories you have burned, base on the video.Kids ™ → Kids The Smart Hubs Kids app provides a quick app launcher and a recommended list of kids and education-related applications and contents your kids can start easily and quickly. It also provides management tools that let you control what your kids can view in the app and how long they can watch.Using Kids with categories ● Playground Displays recommended contents and applications. When you select an application or content, the TV executes the application or contents immediately. N You can add up to 40 items to the recommended list. See "My choice" in this section. N You can edit the contents list. For more detailed information, refer to "My choice" in this section. N Most of the content must be downloaded from Samsung apps. To download, follow the directions on the screen. When the download is complete, press RETURNR repeatedly until the Kids app reappears. Start the contents or app by highlighting and then selecting it. ● Sticker Book Displays the Sticker Books with the stickers your kids received. Also, it can be share with your Family Story. Your kids can receive the sticker through these methods: – By User (parent): You can present a sticker using the Present Stickers function in the Parents menu. – Automatically: Kids presents a sticker while the child is watching content.Creating a Sticker Book 1. If you want to create a new Sticker Book, select Sticker Book on the top of the screen, and then Create a New Sticker Book at the bottom of the screen. The Create a New Sticker Book screen appears. 2. Enter the Sticker Book's name using your remote. When done, select Next. 3. Select a colour for the Sticker Book. When done, select Next. 4. Check the created sticker book. If you want to change a name, select Edit. If you want to change a colour, select Back. 5. When done, select Done. A new Sticker Book is created. N You can create a new sticker book. Maximum number of books is 10. N You can check arrived stickers by highlighting and selecting New Sticker. Only ten new sticker types are displayed in New Sticker at one time. ● Browse all Displays the kids or education-related applications list and all contents list. N When you select an application or contents, if the application or contents has not been installed on the TV, the TV displays the corresponding download screen from the Samsung Apps screen. To use Browse all, follow these steps: 1. On the Browse all screen, select a character. The contents for that character appears on the right. 2. Select the kind of contents you want. Videos: Displays the video contents of the corresponding character. Games: Displays the game contents of the corresponding character.Stories: Displays the e-book contents of the corresponding character. 3. The detailed information screen for the selected contents appears. You can play the contents, share the contents with your Family Story, add the contents to My choice, and give the contents a rating. N If you were purchased already, you can play the contents. If you are not purchased, you can download the contents in the Samsung Apps. ● Parents Lets you edit the Playground, give stickers to your kids, check usage time, and set the watching limit alarm. My choice You can add or delete contents in the Playground. The Playground displays the added contents only. To add or delete contents in the Playground, follow these steps: 1. On the Parents screen, select My choice. The My choice screen appears. N My choice contains content you added through the Browse all screen. 2. Select contents you want to add or delete in the list. A pop-up message appears. 3. Select Yes.4. The selected contents is added or deleted. Present Stickers When your kids do a good job today, you can present a sticker to them. To present a sticker to your kids, follow these steps: 1. On the Parents screen, select Present Stickers. The Present Stickers screen appears. 2. Select a sticker you want to present. A pop-up message appears. 3. Select Yes. 4. Select a sticker book you want to put the sticker into, and then select Present. N If you want to check a sticker book, select Check Now. You can check the stickers in the selected sticker book.5. The sticker is placed in the sticker book you selected. History Lets you check how long your kids have used the app through a graph. Also, lets you check how long your kids have used each video or content item. Change a date or content title using your remote. Set AlarmLets you set how long your kids can watch. When the time is up, the alarm window appears. To set the time your kids can watch, follow these steps: 1. On the Parents screen, select Set Alarm. The Set Alarm screen appears. 2. Select Timer. 3. Select amount of time. The alarm is set.Web Browser ™ → Web Browser (May not be available, depending on your country.) Using this function provided by the Smart Hub, you can surf the Internet on your TV. 1. On the Smart Hub screen, select Web Browser. The Web Browser screen appears. 2. Surf the Internet in the same way as on a PC. Using the coloured and function buttons with the Web Browser ● b Control Panel Shows or hides the control panel at the top of the screen. ● { Link Browsing / Pointer Browsing You can change the cursor to Link Browsing mode or Pointer Browsing mode. In Pointer Browsing mode, you use a pointer to select items on the screen in the same way you use a pointer on a computer. In Link Browsing mode, you move a blue rectangle from link to link on the screen by pressing the directional keys on your remote. Pointer Browsing is best if you have a mouse attached to the TV. Link Browsing only works if you are browsing using your remote. N When you select Pointer Browsing, you cannot use the remote to select items in the Tools Menu. N In Pointer Browsing Mode, you can use the arrow keys on your remote to move the pointer. ● } PIP Turns PIP on or off. With PIP on, you can watch TV while using the Web Browser. ● T Tools Displays the Tools menu.Control Panel: Shows or hides the control panel in the top of the screen. Link Browsing / Pointer Browsing: You can change the cursor to Link Browsing mode or Pointer Browsing mode. PIP: Turns PIP on or off. PIP Settings: Lets you select where the PIP window is displayed on the screen and which sound source the TV plays, sound from the main screen (the browser) or sound from the sub screen (the PIP window). Add to Bookmark: Add the current page to your Bookmarks. Enable Grabbing / Disable Grabbing: You can move a current web page in the direction you choose. To move a web page, select a page, and then move it in the direction you wish using your remote. N Available only when the cursor is set to Pointer Browsing.● πµ Scroll up/down You can scroll the page up or down. ● R Return Close the Web Browser. Using the Control Panel with Web Browser The Web Browser has a series of icons across the top of the screen which provide a number of useful functions. With these icons, you can easily use the Web Browser. The icons are described below, starting with the icon on the far left of the screen. ● Back Moves to the previous web page. N If there is no previous web page, this icon will not work. ● Forward Moves to the next web page. N If there is no next web page, this icon will not work. ● Refresh / StopRefreshes the current page or stops the current connection from loading. ● Home Page Goes to the URL you specified as you’re the home page. ● Zoom You can select a zoom level of 50%, 75%, 100%, 125%, 150%, 200%, 300% and Fit to screen. ● Bookmarks Displays the Bookmarks screen. You can bookmark the current page or select a favourite page to visit from the bookmark list. You can also sort by Date, Name, or Times Visited. To sort, select the Sort. When you select Enter URL, you can enter in a new URL address directly using your remote or mouse and bookmark it. When you highlight a bookmark, the Option button appear on the right. In the Option popup, you can edit the selected page or delete the selected page from bookmark list. Using the Tools menu with Bookmark ● Delete All Delete all bookmark lists. ● Add to Bookmark Bookmarks the current page. ● Import bookmarks You can import a bookmark file saved on another device such as a PC. ● Export bookmarks You can export a bookmark file from your TV to another device connected to your TV. ● History Displays the History screen. You can select a web page to visit in the History list. You can also sort by Date, Name, or Times Visited. To sort, select Sort. When you select Enter URL, you can enter in a new URL address directly using your remote or mouse. When you highlight a page, the Option button appear on the right. In the Option popup, you can delete the selected page from the history list or add the selected page to bookmark. N If you want to delete all entries in the history lists, open the Tools menu and then select Delete All. ● URL FieldShows the URL of the current page. If you select the URL field, the URL popup appears. Using your remote, you can enter a new URL directly. ● Windows List Displays list or images of open windows (the Windows List). You can open new window from list (using Open new window), select and access a window in the list, select and close a window in the list, or close all windows. When you select Enter URL, you can enter a new URL address directly using your remote or mouse. By clicking the Text/ Image button in the upper right of the screen, you can toggle the Windows list between text descriptions of open windows and images of the open windows. Using the Tools menu with Windows List● Open new window Open a new web browser window. The new web browser page automatically displays the home page. ● Close all windows Close all the currently opened windows listed in Windows List. After closing all windows, the TV opens a new web browser window automatically. The new web browser window automatically displays the home page. ● Search Lets you search the web. When you access the Search entry field, the Search screen appears. To search the web by word input, follow these steps: 1. On the Search screen, select the search engine.2. Select Enter search keyword.. The keyboard screen appears. 3. Enter the word you want to use as the keyword using your mouse or remote. The TV searches using the keyword and search engine you selected. ● Share Share the current web page with your Family Story. ● OptionsYou can configure the Web Browser settings. Configuring the Web Browser Using Options Move the cursor to the top of the screen, and then select the Options icon. ● Reading Tools Provides an easy-to-read page by enlarging the main text. Reading Tools is not available for all pages.● Approved Sites Allows to restrict your children’s access to inappropriate web pages. Therefore, this function allows access of only the registered web sites. N Every time you access the Approved Sites, the PIN screen appears. The first time you access Approved Sites, enter the default PIN, 0-0-0-0 using the numbers keypad on your remote. You can change the PIN using the Reset password for Approved Sites function. See below. Approved Sites feature: Turns the Approved Sites function on or off. Reset password for Approved Sites.: Change the Approved Sites password. Add current site: Lets you add the currently displayed web site to the Approved Sites list. Manage Approved Sites: Lets you key in URLs to add to the Approved Sites list and delete sites from the Approved Sites list. N If you turn Approved Sites on and have not added any sites to the Approved Sites list, you will not be able to access any Internet sites. ● Private Browsing Enable or disable the Privacy mode. When the Privacy mode is enabled, the browser does not retain the URLs of sites you visit. If you want to enable Private Browsing, select Yes. If the Private Browsing function is running, the “Stop” icon appears in front of the URL at the top of the screen. To disable Private Browsing, select it again when Private Browsing is enabled. ● PIP Settings Lets you configure the PIP function. PIP Position: Select a position for the PIP sub-picture.Sound: Select the audio source you will hear - Main or Sub - when PIP is on. ● Web Browser Settings You can configure Web Browser options. Set as homepage: You can set the home page. – Most visited: Set the most frequently visited URL as the home page. – Current Page: Sets the current page as the home page.– Bookmarks: Sets the bookmarks URL as the home page. – Enter URL: Lets you key in the URL of the page you want for your home page. The keyboard works like a cell phone texting keyboard. Pop-up block settings: Turns the Popup Block on or off. Ad Block Settings: You can determine whether to block advertisements and select the URLs for which advertisements are blocked. – Ad Blocker: Turns the Ad Blocker on or off. – Block current page: Adds the current page to the blocked list. – Manage blocked sites: You can add a website for which advertisements will be blocked by directly keying in the URL, or you can delete a website from the list. General: You can delete your personal information. – Delete history: Deletes the website history. – Delete browsing data: Deletes Internet access information such as cookies. – Reset Settings: Reset all web browser settings to the factory defaults. – Hide Menu: Turns the control panel auto-hide on or off. If you select on, the control panel on the top will be hidden and only appear when you move the pointer to the top of the screen. Encoding: You can set the Encoding setting for web pages to Automatic or Manual. – Auto select: Turns automatic Encoding for web pages on or off. The browser selects the appropriate encoding format automatically.– Settings: Select an encoding format from a list of encoding formats manually. The format is applied to all pages. Pointer: You can set the speed of the cursor when the cursor is set to Pointer Mode. – Pointer Speed: Select a pointer speed. Browser Information: Displays the version and copyright information for the Web Browser.Skype ™ → Skype Skype created a little piece of software that makes communicating with people around the world easy and fun. With Skype you can say hello or share a laugh with anyone, anywhere. And if both of you are on Skype, it’s free. Communicate with people around the world! N To use Skype, you need the Samsung TV Camera (sold separately). Other company’s TV Cameras are not compatible with Skype on your TV. N For more information, download the Skype user’s manual from “www. samsung.com.” [Legal Statement] Due to the various capabilities of products featuring the Samsung Smart Hub - Content Service, as well as limitations in the available content, certain features, applications, and services may not be available on all devices or in all territories. Some features on Smart Hub may also require additional peripheral devices or membership fees that are sold separately. Please visit http://www.samsung.com for more information on specific device information and content availability. The services and availability of content through Smart Hub are subject to change from time to time without prior notice.AllShare Play ™ → AllShare Play View or play photos, music, and movie files located on a USB Mass Storage Class (MSC) device, a PC, or a DLNA device (a cell phone, for example) on your TV. N To view content on a USB device, you must plug the device into a USB port on the TV. N If you want using a USB HDD, we recommend using a USB HDD that has a power adapter. N To play content located on your PC or on a DLNA compatible cell phone, you must connect your PC and the TV to your network and download and install the AllShare network software on your PC. Connecting a USB Device 1. Turn on your TV.2. Connect a USB device containing photo, music and/or movie files to the USB port on the TV. 3. When a USB device is connected to the TV, the New device connected. window appears. Select a category you want to play among Videos, Photos and Music. N The TV may display the files on the USB device automatically if it is the only device connected.4. The AllShare Play Music, Photos, or Videos screen appears. If the USB device has folders, the TV displays a list of folders. Highlight and then select a folder. If the USB device does not have folders, the TV will display files or thumbnails. 5. Highlight and then select a file to view or play. N To select a different Content Type or Device Type, press the RETURNR button repeatedly until the AllShare Play main screen appears. N For more information about playing back files, see the section of this manual starting with "Controlling Video Playback". Read this information before using AllShare Play with a USB device.Restrictions and Cautions Œ Before connecting your device to the TV, please back up your files ensure against file damage or data loss. SAMSUNG is not responsible for any data file damage or data loss. Œ Connect a USB HDD to the dedicated USB 1 (HDD 5V 1.0A) port. Œ Do not disconnect a USB device while it is being read by the TV. Œ If you connect a USB device with a USB extension cable, the TV may not recognize the USB device or read the files on the device. Œ If a USB device you connect to the TV is not recognized, the files on the device are corrupted, or a file in the list is not played, connect the USB device to a PC, format the device, re-copy the files to the device, and then try playing again. Œ If a file you deleted from the PC is still found when you run Smart Hub, use the “Empty the Recycle Bin” function on the PC to permanently delete the file. Œ If your PC cannot construct a functional database of saved files on a USB device because there is no free space on the USB device, you may not be able to view any new files you have added, even though you have saved these files to the USB device. Supported Devices Œ Certain types of USB Digital camera and audio devices may not be compatible with this TV. Œ AllShare Play supports only USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class BulkOnly Transport device. Examples of MSC include Thumb drives, Flash Card Readers, and USB HDD (USB HUB are not supported). Devices should be connected directly to the TV’s USB port. Œ If more than 2 PTP (Picture Transfer Protocol) devices are connected, you can only use one at a time. Œ If more than two MSC devices are connected, some of the devices may not be recognized. Œ A USB device that requires high power (more than 500mA or 5V) may not be supported. Œ If the TV has no input during the time set in Auto Protection Time, the Screensaver will run. Œ The power-saving mode of some external hard disk drives may be released automatically when you connect them to the TV. File system and formatsŒ The USB function might not work properly with unlicensed multimedia files. Œ MTP (Media Transfer Protocol) is not supported. Œ The file system supports FAT16, FAT32, and NTFS. Œ AllShare Play supports only the Sequential jpeg format. It does not support the Progressive jpeg format. Œ The higher the resolution of the image, the longer it takes to display on the screen. Œ The maximum supported JPEG resolution is 15360 X 8640 pixels. Œ If a file is corrupted or the TV does not support the file type, the Not Supported File Format. message appears. Œ If the files are sorted by Folder view, the TV can display the names of up to 1000 files in each folder.Œ If the number of files and folders saved on a USB storage device is over approximately 8000, some files and folders may not appear and some folders may not be unopenable. Œ The TV cannot play MP3 files with DRM that have been downloaded from a for pay site. Digital Rights Management (DRM) is a technology that supports the creation, distribution, and management of digital content in an integrated and comprehensive way, including protecting the rights and interests of content providers, preventing illegal copying of contents, and managing billings and settlements. Œ Even if a file you want to play is encoded in a supported format, an error message may appear due to a sub container or profile problem.Connecting to a PC through a network You can play pictures, music, and videos located on your PC through a network connection using AllShare Play. N For more information on how to configure your TV and connect it to your network, refer to “Setting up the Network” in this manual. N To view content located on your PC, you must have connected your TV and your PC to your LAN and downloaded and installed AllShare PC Software on your PC. N We recommend you locate both your TV and PC in the same network subnet. IP addresses have four parts, separated by periods (111.222.333.444). If your TV and PC are in the same subnet, the first 3 parts of the TV IP address and the PC IP address (111.222.333) will be the same and only the last part (the host address) will be different. The following AllShare Play functions are not supported when you are playing media from a PC connected through a network: N The Background Music and Background Music Setting functions. N Sorting files by preference in the Photos, Music, and Videos folders. – The † (REW) or … (FF) function while a movie is playing. Additional Notes N DivX DRM is not supported. N Set your PC firewall programme so that AllShare PC Software is a permitted programme. N Depending on the Internet server, when you use AllShare Play through a network connection: – The sorting method may vary.– The Scene Search function may not be supported. – The Resume function, which resumes playing of a video, may not be supported. – The Resume function does not support multiple users. (It memorizes only the point where the most recent user stopped playing a video.) – The search function may not work depending on the content information. N You may experience file stuttering while playing a video in AllShare Play through a network connection. You can play the content in the Web storage on TV. Follow the instructions below: – Enter the AllShare Play service on TV → Select a content type of Music, Photos, and Videos → Select SugarSync → Select a file to play – Visit www.sugarsync.com and you can upload PC contents to the Web stroage (SugarSync). However, you can use the TV to play the content in the PC only where the uploading path is Web Archive -AllShare Play - Music / Photos / Videos. – You can also use the TV to play the content in a AllShare Play -enabled mobile device where the uploading path is specified as above.Using the AllShare Play AllShare Play enables you to enjoy the following services. You need to log in to your Samsung account to use web storage or social services. AllShare Play can play various contents in three ways: – Using USB Device: You can play videos, photos, or music from a connected USB device. – Using DLNA or Web storage: You can play various contents from devices connected to your home network or web storage. – Using Social Services: You can play some content from social services such as Family Story, Facebook or Picasa. N Before using Facebook or Picasa, it should be installed in the Smart Hub. N To use SugarSync, Facebook, or Picasa, you should log in to corresponding application. Alternatively, you can register your application account in to your Samsung account. To register your application account, refer to "Configuring the Smart Hub with Settings" in the Smart Hub section. N To use Family Story, you should log in to your Samsung account. Before using Family Story, you should join a group at least one more.N You can transfer a desired content to other device connected to the TV. Contents Type Supported transfer device USB DLNA, SugarSync, Family Story, Picasa, Facebook Camera DLNA DLNA USB SugarSync USB Family Story USB Picasa USB Facebook USB Mobile device USBMy list (In AllShare Play) ™ → AllShare Play → My list Using this function, you can access content easily and quickly. ● Recently played Displays a list of recently played video, photo or music files. If you have a file you want to play again, use this list. N When you play a file from the Recently played list, and the USB device is not connected or the file is not found, the "Unable to find the file." message appears. N The Recently played list can have up to 48 files. The files are arranged so that the most currently played files are at the top of the list. N Recently played files located on a mobile phone may not play. ● What's new Displays newly saved videos, photo, or music files on a connected USB device or your PC. If you have a newly updated file you want to play, use this category. ● Playlist Displays the Playlist files saved on the USB device or your PC. If you want to play a playlist, select the playlist. The selected playlist plays immediately. N You can create up to 12 playlists. N You can add up to 100 files to a single playlist.N You can only add one type of content to a single playlist. For example, you can only add music files to a playlist that includes music files. Creating a Playlist 1. On the AllShare Play main screen, select Videos, Photos, or Music on the left side of the screen. 2. On the right side of the screen, highlight and select the device that has the files you want in the playlist. AllShare Play displays the folders and/or files on the device. 3. If AllShare Play is displaying folders, highlight and select the folder that contains the files you want. If it is only displaying files, go to Step 4. 4. Highlight a file, and then open the Tools menu using your remote, 5. Highlight and select Add to Playlist.6. Highlight and select a file you want to add. The c mark appears in the check box. 7. Repeat Step 6 to select additional files. N To select all the files in the list, select Select All. To cancel a selection, select the file again. 8. When done, select Add. The Add to Playlist screen appears. 9. Select Create new. The Create a new playlist. screen appears. 10.Enter playlist name using your remote or accept the default name. 11.When finished, Select Done. The new playlist is created. The Added popup appears. 12.Select Play to play now or OK to play later. To add music files a playlist, follow these steps:1. On the AllShare Play main screen, select Videos, Photos, or Music on the left side of the screen. N You must select the kind of content that is already in the playlist. For example, if you want to add files to a music playlist, you must select Music. 2. On the right side of the screen, highlight and select the device that has the files you want in the playlist. AllShare Play displays the folders and/or files on the device. 3. If AllShare Play is displaying folders, highlight and select the folder that contains the files you want. If it is only displaying files, go to Step 4. 4. Hiighlight a file, and then open the Tools menu using your remote, 5. Highlight and select Add to Playlist. 6. Highlight and select a file you want to add. The c mark appears in the check box. 7. Repeat Step 6 to select additional files. N To select all the files in the list, select Select All. To cancel a selection, select the file again. 8. When done, select Add. The Add to Playlist screen appears. 9. Highlight and select the playlist you want to add the files to. The Added pop-up appears.10.Select Play to play now or OK to play later. Using Play Selection with music files 1. Highlight a music file in the file list. 2. Open the Tools menu using your remote, and then select Play selection. 3. Select the track you want to add. A c mark appears in the check box on the left.4. Repeat Step 3 to select additional tracks. N To select all the files in the list, select Select All. To cancel a selection, select the file again. 5. Select Play. The selected music files play. Using View with Music files When you use the AllShare Play function with your Web storage rather than a USB device, View is not supported. 1. To sort files in the file lists, select } using your remote. The View screen appears. 2. Select sort criteria you want. ● Folder view Displays the folders on the device in alphabetical order. To view the file names and thumbnails, select a folder.● Title Sorts and displays the files by title in Symbol / Number / Alphabet / Special order. ● Artist Sorts the music files by artist in alphabetical order. ● Album Sorts the music files by album in alphabetical order. ● GenreSorts the music files by the genre. Send your music files Lets you send your music files to your Web storage or other devices. N To use the Send Function, you must be logged in to Smart Hub. 1. To send music files in the file list, open the Tools menu using your remote, and then select Send. 2. Select a music file you want to send. The c mark appears in the check box. 3. Repeat Step 2 to select additional tracks. N To select all the files in the list, select Select All. To cancel a selection, select the file again. 4. When done, select Send. The Send screen appears. 5. Choose the destination device to send, and then select Send.6. From these steps, please follow the instructions on the screen. To delete one or more files in the Playlist, follow these steps: 1. On the AllShare Play main screen, select My list. 2. In the Playlist area at the bottom of the screen, highlight the playlist you want to edit. 3. Open the Tools menu using your remote, and then select Edit playlist. The Edit playlist screen appears. 4. Select a file you want to delete. The c mark appears in the check box. 5. Repeat Step 5 to select additional files. N To select all the files in the list, select Select All. To cancel a selection, select the file again. 6. When done, select Remove. A popup message appears.7. Select Yes. The selected file(s) has been removed from the playlist.Videos (In AllShare Play) ™ → AllShare Play → Videos You can play video files saved on USB device and/or your PC. N For more information about the subtitle formats and codec formats, refer to "Supported Subtitle and AllShare Play file formats" in the Other Information section. Playing a Video1. On the AllShare Play screen, select Videos. 2. Highlight and select the device you want to play. 3. If AllShare Play displays folders, highlight and select the folder that contains the file you want, then go to Step 4. If AllShare Play displays files only, go directly to Step 4. 4. Highlight and select the desired video on the file list screen.N If you stop the video while it is playing, you can play the video later from the point where you stopped it. N The file name appears on the top of the screen with the video's playing time. N If video time information is unknown, the playing time and progress bar are not displayed.Video playback control buttons ● †, … Each time you select † or … using your remote, the playback speed change as follows. († 1 / † 2 / † 3 / … 1 / … 2 / … 3) ● l, r Jump to backward or forward from current position. ● ∑ Pause the scene.– For Slow Motion: In pause mode, select …. Each time you select … using your remote, the playback speed is reduced in this order „ 1/8 / „1/4 / „1/2. The playback speed is displayed in the upper left corner. – For Step Mode: In pause mode, select ∑. Each time you select ∑ using your remote, a new frame will be appear.N To return to normal speed playback, select r using your remote. N The product does not play sound in Step mode or Slow Motion. N Slow Motion and Step Mode operate only in the forward direction. Using the Tools menu with Videos ● On the file list screen, you can use the following these options:– View Lets you sort the file list by one of four sort criteria. – Play selection Lets you select one or more files to play immediately. – Send Lets you send your video files to your Web storage or other devices. N If you want to use this function, you must log in to Smart Hub.– Login / Logout You can login to or logout of your Samsung Account. – Add to Playlist Lets you create playlists. When you create playlists, you can play a series of videos that you want to watch easily and quickly. – Go to playlist Moves to the Playlist screen.– Information Displays detailed information about the selected file. ● During playback, you can use the following options on the Tools menu: – Go to Videos List Stops the video and takes you to the file list screen. – Play from the beginning You can restart a video file from the beginning.– Scene Search You can use the Scene Search function during playback to view or start a movie from the scene of your choice. N If the index information in the file damaged or the file does not support indexing, you will not be able to use the Scene Search function. – Title SearchYou can search the video using the left and right arrow keys or input a playing time directly using your remote. – Time Search Search the video or input the play time directly using your remote. – Repeat Mode You can play a single movie file or all the files on the play list screen repeatedly.– Picture Size Lets you adjust the picture size to your preference. – Picture Mode You can change the Picture Mode. – Sound Mode You can change the Sound Mode. – Audio Language You can listen to the video in one of supported languages. The function is enabled only when you play stream-type files which support multiple audio formats. – Subtitle Lets you view with language subtitles. You can select a specific language if the subtitle file contains multiple languages. – Subtitle Settings Displays the Subtitle Settings. You can select subtitle options such as colour and transparency.– Information Displays detailed information about the selected file. N The functions available on the Tools menu at one time depend on the characteristics of the video you are playing. All functions are not necessarily available for all videos. Using the View function with Video Files When you use the AllShare Playfunction with your Web storage rather than a USB device, View is not supported. 1. To sort files in the file lists, select } using your remote. The View screen appears. 2. Select sort criteria. ● Folder view Displays the folders on the device in alphabetical order. To view the file names and thumbnails, select a folder. ● Title Sorts and displays the file by title in Symbol / Number / Alphabet / Special order. ● Latest Date Sorts and displays files by the latest create date. ● Earliest Date Sorts and displays files by the earliest create date.Send your video files Lets you send your video files to your Web storage or other devices. N To use Send, you must be logged in to Smart Hub. 1. To send video files in the file list, open the Tools menu using your remote, and then select Send. 2. Select a video file you want to send. The c mark appears in the check box. 3. Repeat Step 2 to select additional files. N To select all the files in the list, select Select All. To cancel a selection, select the file again. 4. When done, select Send. The Send screen appears. 5. Choose the destination device to send, and then select Send. 6. From these steps, please follow the instructions on the screen.Photos (In AllShare Play) ™ → AllShare Play → Photos Viewing a photo (or slide show) N For more information about the supported image formats, refer to "Supported Subtitle and AllShare Play file formats" in the Other Information section. 1. On the AllShare Play screen, select Photos.2. On the right side of the screen, select the device that has the photos you want to view. 3. If AllShare Play displays folders, select the folder that contains the photos you want, then go to Step 4. If AllShare Play displays photo thumbnails, go directly to Step 4. 4. To start a slide show, select ∂ using your remote. N To view another photo manually, press the l or r button. N During the slide show, all files in the file list are displayed in order, starting from the file you selected. N When viewing a photo file or slide show, you can add background music if you have music files on same device. N If you select the wrong background music, you cannot change the music until the BGM (Background Music) has finished loading. Photo playback control buttons ● † / … The slide show speed change as follow (Slow, Normal, Fast). The speed is displayed in the upper right of the screen. ● l, r Go to the previous or next photo.● ∫ Return to the file list screen. ● ∂ Start the slide show. ● ∑ Pause the slide show. Using the Tools menu with Photos ● To use the Tools menu with photos, you must first highlight a photo file on the file list screen. After you have highlighted a photo on the file list screen, you can use the following options in the Tools menu: – View Lets you sort the file list by one of four sort criteria. – Play selection Lets you select one or more files to play immediately. – Send Lets you send your photos with your Family Story account or photorelated application. N To use Send, you must be logged in to Smart Hub. – Login / Logout You can login to or logout of your Samsung Account. – Add to Playlist Lets you create playlists. When you create playlists, you can play a series of photos easily and quickly– Go to playlist Moves to the Playlist screen. – Information Displays detailed information about the selected file. ● When playing a photo file, you can use the following options: – Go to Photos List Moves to the file list screen. – Start Slide Show / Stop Slide Show You can start or stop a slide show. Alternatively, select ∂ to start a slide show or ∑ to stop a slide show using your remote. – Slide Show Speed You can select the slide show speed during the slide show. Alternatively, select † or … using your remote. – Background Music On / Background Music Off You can turn on or turn off background music.– Background Music Setting You can set and select background music when watching a photo file or slide show. – Picture Mode You can change the Picture Mode. – Sound Mode You can change the Sound Mode. N Available only when Background Music is set to on. – ZoomYou can zoom into images in full screen mode. – Rotate You can rotate images. – Information Displays detailed information about the selected file. Using the View function with Photo Files When you use the AllShare Play function with Family Story, Facebook, or Picasa rather than a USB device, View is not supported. 1. To sort files in the file lists, select } using your remote. The View screen appears. 2. Select sort criteria. ● Folder view Displays the folders on the device in alphabetical order. To view the file names and thumbnails, select a folder.● Title Sorts and displays the files by title in Symbol / Number / Alphabet / Special order. ● Latest Date Sorts and displays files by the latest create date. ● Earliest Date Sorts and displays files by the earliest create date. ● MonthlySorts and shows photo files by month. Send your photos Lets you send your photos with your Family Story account or to other devices. N To use Send, you must be logged in to Smart Hub. 1. For example, suppose that you want to send with your Family Story.2. To send photo files in the file list, highlight a file, open the Tools menu using your remote, and then select Send. 3. Select a photo file you want to send. A c mark appears in the check box on the left. 4. Repeat Step 3 to select additional tracks. N To select all the files in the list, select Select All. To cancel a selection, select the file again. 5. When done, select Send. The Send screen appears. 6. Choose the destination device to send to. 7. Choose the family group to share with. A pop-up window appears. 8. Enter a message to send to the family group you selected. N In the QWERTY keyboard screen is displayed, you can use a keyboard connected to the TV to enter the message. 9. When done, select Send.Music (In AllShare Play) ™ → AllShare Play → Music Playing Music N For more information about the supported music file formats, refer to "Supported Subtitle and AllShare Play file formats" in the Other Information section. 1. On the AllShare Play screen, press the arrow button to select Music.2. Select the device that contains the files you want to play. 3. If AllShare Play displays folders, highlight and select the folder that contains the music files you want, then go to Step 4. If AllShare displays only files, go directly to Step 4. 4. Select the desired music file in the file list or select ∂ using your remote. N To move to a previous page, select b using your remote. To move to the next page, select { using your remote. N When the music is playing, you can fast forward or fast rewind the music file by selecting † or … using your remote. N If the sound is abnormal when you play MP3 files, adjust the Equaliser in the Sound menu. (An over modulated MP3 file may cause a sound problem.) Music playback control buttons During playback, you can use additional functions at the bottom right of the screen. ● Play / Pause You can start or pause a music file. Alternatively, you can select ∂ or ∑ using your remote. ● Repeat ModeYou can play one or all the music files shown in the file list repeatedly. ● Shuffle Mode You can play the music files sequentially or randomly. ● Sound Mode You can change the Sound Mode. Using the Tools menu with Music ● To use the Tools menu with Music, you must first highlight a music file on the file list screen. After you have highlighted a music file on the file list screen, you can use the following options in the Tools menu: – View You can sort the file list by one of four sort criteria. – Play selection Lets you select one or more files to play immediately. – SendLets you send your music files to your Web storage or other devices. N To use Send, you must be logged in to Smart Hub. – Login / Logout You can login to or logout of your Samsung Account. – Add to Playlist Lets you create playlists. When you create playlists, you can play a group of music files easily and quickly.– Go to playlist Moves to the Playlist screen. – Encoding You can select an encoding format from the encoding format list. – Information Displays detailed information about the selected file.Recorded TV (In AllShare Play) for LED 4500 - 5400 Series : This function is not supported. ™ → AllShare Play → Recorded TV (Depending on the country) To use the recording or Timeshift function, the connected USB device must be available for recording. Device format is recommended to use USB HDD. N During the Device formatting, do not disconnect the device while formatting is in progress. If you format the device, all files will be deleted. N Before formatting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.To record a current broadcasting programme Allows you to record a programme currently being broadcasted. Set the current time first to use this function. 1. When you record a broadcast programme, press the ∏ button on the remote to record. A pop up window will appear. N We recommend using a USB HDD with at least 5,400 rpm, but a USB HDD of RAID type is not supported. N A USB storage device cannot record until it completes the Device Performance Test. N The file systems of the PVR output (Personal Video Recorder) and the Camera app are different. Therefore, you cannot save both output types on the same USB device. To make a recording using the PVR and the Camara app, you have to save the recordings using different USB ports. 2. Select Length to set up the recording time, and then select OK. Playing Recorded TV Programme 1. On the AllShare Play screen, select Recorded TV. 2. Select the device you want to play. 3. Select the desired recorded TV file in the file list. N To move a previous page, select π using your remote. To move a next page, select µ. 4. Select ∂. ● The selected file is displayed on the top with its playing time. Playback control button with Recorded TV ● †, … Each time select †, … your remote, the playback speed change as follows. († 1 / † 2 / † 3 / † 4 / † 5 / † 6 / † 7 / … 1 / … 2 / … 3 /… 4 / … 5 / … 6 / … 7 ) ● l, r Jump to backward or forward from current position. ● ∑ Pause the scene. – In pause mode, select … using your remote. Each time select … using your remote, the playback speed is reduced to „1/8 / „1/4 / „1/2. – In pause mode, select ∑ using your remote. Each time the ∑ function is selected, a new frame will be appear. N To return to normal speed playback, select r using your remote. N The product does not play sound in stop mode. N Stop motion operates only in the forward direction.Using the Tools menu with Recorded TV ● On the file list screen, you can use the following these options: – Play Current Group Will play the contents of the selected groups. – View You can sort the file list by selecting sort criteria you want. – Play selectionYou can play by selecting the desired music file in the file list. – Delete Deletes the file from the list. – Add to Playlist Lets you make your own playlist. When you use the playlist, you can play music you want to listen easily and quickly. – Go to playlist Moves to Playlist screen. – Lock / Unlock To enable or disable the lock. – Device Management On the device can scan and format. ● The following functions are available only in selected content item. – Rename Change the name of the content. – Information Displays detailed information about the selected file.● During playback, you can use the following these options: – Go to Recorded List Moves to the file list screen. – Play from the beginning You can restart a video file from the beginning. – Title Search You can move directly to another title. – Time SearchSearch the video or input the play time directly using your remote. – Repeat Mode You can play movie files repeatedly. – Picture Size You can adjust the picture size to your preference. – Picture Mode You can change the Picture Mode. – Sound Mode You can change the Sound Mode.– Information Displays detailed information about the selected file.Timeshift (Depending on the country) for LED 4500 - 5400 Series : This function is not supported. Using the Timeshift function If you missed a live broadcast, you can see from the recorded broadcast using this feature. 1. When you watch a broadcast programme, select ∂ using your remote to start the Timeshift function. 2. If you want to stop the Timeshift function, select ∫ using your remote. N The Timeshift mode operates for a maximum of 90 minutes. N The Timeshift function is not supported for analogue channels. N The Timeshift functions are disabled for channels locked with Channel Lock.Before using the Timeshift and a record function... Recorded videos are DRM (digital rights management) protected and cannot be played on a PC or other TVs. Note that files saved on the TV cannot be used after the main board is changed. NOTE ● We recommend using a USB HDD with at least 5,400 rpm, but a USB HDD of RAID type is not supported. ● The availability of both recording and the Timeshift function may differ depending on picture quality and the free space on the hard disk drive. ● USB memory stick is not compatible. ● When the Timeshift is used to the gunwales, the pause may be cancelled. ● When recording is performed by both the PVR (Personal Video Recorder) function and a device that supports the HDMI-CEC feature, recording by the PVR function takes precedence. ● If the USB device has failed the Device Performance Test, the USB device must go through the Device Format and Device Performance Test again before you record with the Guide or Channel. ● The Timeshift functions can only be used with a USB storage device that completed the Device Performance Test. ● If you attempt the recording or Timeshift function with a device that did not have the Device Performance Test, the function will not start. ● If any function that turns off the TV (Sleep Timer, Off Timer, etc.) is set for a time that conflicts with recording, the TV will be turned off once the recording is complete. ● For the Timeshift operation, the USB device requires 1.5GB of free space. ● The Schedule Recording function requires 100MB of free space on the USB device. ● If the free space of the USB device decreases to less than 50MB while a Schedule Recording is operating, the Schedule Recording function is automatically terminated. ● When both the Schedule Recording and Timeshift functions are running, and the free space on the USB device decreases to less than 500MB, only the Schedule Recording function is automatically terminated. ● The Timeshift function continues even after changing the digital channel and users can watch past programs using the saved Timeshift data. – If the TV enters a state where the Timeshift function is not supported (application execution, input signal switching, analogue channel change, etc.), the Timeshift data are not saved. ● If the TV enters a state where the Timeshift function is not supported (application execution, input signal switching, analogue channel change, etc.) while the Timeshift function is running, it is automatically terminated without an additional message being displayed.● If a user tunes to a digital channel, the suspended Timeshift function resumes automatically.Using the DLNA Function ™ → AllShare Play You can play media contents including videos, photos, and music saved on your mobile phones or the other devices (such as your PC) by controlling them on the TV via the network. For more information, visit “www.samsung.com” or contact the Samsung call centre. Mobile devices may need additional software installation. For details, refer to each device’s user’s guide. N If your Samsung TV connects to a non-Samsung DLNA server, a compatibility issue may occur during video playback. N By connecting your Samsung TV to a network via AllShare Play, you can use Samsung’s original functions as follows: – Playback of various video formats (DivX, MP4, 3GP, AVI, ASF, MKV, etc.) – Video thumbnail feature – Bookmark function (to resume video playback) – Auto-chaptering (scene navigation) – Digital content management – Compatibility with various subtitle formats (SRT, SMI, SUB, TXT, TTXT)– Search with file names – And many others N To use the original DLNA functions of Samsung fully, it is recommended that you use the AllShare Play software provided in your TV. AllShare Settings Menu → Network → AllShare Settings Shows a list of mobile phones or connected devices which have been set up to use AllShare Settings with this TV. N The AllShare Settings function is available in all devices which support DLNA DMC. ● Allowed / Denied: Allows / Blocks the devices. ● Delete: Deletes the devices from the list. N This function only deletes the name of the device from the list. If the deleted device is turned on or tries to connect to the TV, it may appear on the list again. To play the media contents of the devices connected to DLAN function, follow these steps: 1. On the AllShare Play screen, select the kind of content you want to play: Videos, Photos, Music. 2. On the right side of the screen, select DLNA. The TV displays the list of devices connected using the DLNA function. 3. Select a device. AllShare displays the accessible files or folders on the device. 4. Select a file in the file list. The selected file will play. Playing media contents saved on DLNA devices1. Connect the mobile phone or other devices which support AllShare Play function. 2. Play media contents on the device. A popup screen appears on the bottom of your TV. 3. Select Allow to accept the connected device. The media contents of the device can now play on your TV. N You can find the allowed devices on AllShare Settings.N An alarm window appears informing you that media contents (videos, photos, music) sent from a mobile phone will be displayed on your TV. The contents are played automatically 3 seconds after the alarm window appears. – If you close the alarm window using your remote when the alarm window appears, the media contents are not played.N The first time a device accesses your TV through the media function, a warning pop up window appears. Select Allow. This permits the phone to access the TV freely and use the Media function to play content. N To turn off media contents transmissions from a mobile phone, set the device to Denied in the AllShare Settings. N Contents may not play on your TV depending on their resolution and format. N Some buttons may not work depending on the type of media content. N Using the mobile device, you can control the media play. For details, refer to each device’s user’s guide.Anynet+ (HDMI-CEC) Menu → System → Anynet+ (HDMI-CEC) Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.N You can only control Anynet+ devices using the TV’s remote control, not the buttons on the TV. N The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device. N The Anynet+ functions do not operate with other manufacturers’ products. N For instructions explaining how to connect Anynet+ external devices, refer to the device’s user manual. You must connect an Anynet+ device using an HDMI cable. Some HDMI cables may not support Anynet+ functions. N Anynet+ works when the AV device supporting Anynet+ is in the standby or on status. N Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type. N However, you can connect only one Anynet+ Home Theatre. To connect an Anynet+ Home Theatre, connect the Home Theatre to the TV using an HDMI cable then: – To hear sound from the Home Theatre’s front, left and right speakers and the subwoofer only, connect a digital optical cable between the DIGITAL AUDIO OUT (OPTICAL) port on your TV and the Digital Audio Input on the Home Theatre. – To hear 5.1 channel audio, connect HDMI cables to your Anynet+ DVD player, satellite box, etc. Then, connect the DIGITAL AUDIO OUT (OPTICAL) port on your DVD player, Satellite Box, etc. (i.e. Anynet+ Device 1 or 2) directly to the Home Theatre, not the TV.Anynet+ (HDMI-CEC) Menu TOOLS → Anynet+ (HDMI-CEC) The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. ● View TV Change from Anynet+ mode to TV broadcast mode. ● Device List Shows the Anynet+ device list.● (device_name) Menu Shows the menu of the connected device. E.g. if a DVD player is connected, the disc menu of the DVD player will appear. ● (device_name) Tools Shows the Tools menu of the connected device. E.g. if a DVD player is connected, the Tools menu of the DVD player will appear. N Depending on the device, this menu may not be available. ● (device_name) Title Menu Shows the title menu of the disc in the connected device. E.g. If a DVD player is connected, the title menu of the movie in the DVD player will appear. N Depending on the device, this menu may not be available. ● Receiver Sound is played through the receiver.Setting up Anynet+ (HDMI-CEC) ● Anynet+ (HDMI-CEC) To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. N When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated ● Auto Turn Off Set an Anynet+ Device to turn off automatically when the TV is turned off. N If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off. N May not be enabled depending on the device. ● Receiver You can listen to sound through a receiver (i.e. Home Theatre) instead of the TV Speaker.Switching between Anynet+ Devices 1. Open the Tools menu using your remote, and then select Anynet+ (HDMI-CEC). 2. Select Device List. The Device List screen appears. N If you cannot find a device you want, select Refresh to refresh the list. 3. Select a device, and then wait until the switch to the selected device is completed. N The Device List menu appears only when you set Anynet+ (HDMI-CEC) to On in the System menu. N Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while switching is in progress.N If you have selected an Anynet+ device using the Source function, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device using the Device List function. (TOOLS → Anynet+ (HDMI-CEC) → Device List) Listening through a Receiver You can listen to sound through a receiver (i.e. Home Theatre) instead of the TV Speaker. To listen to sound through a receiver, go to Receiver screen (System → Anynet+ (HDMICEC) → Receiver). Then select Receiver and set to On. N If your receiver supports audio only, it may not appear in the device list. N The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) port of the TV. N When the receiver (i.e. Home Theatre) is set to on, you can hear sound output from the TV’ s Optical jack. When the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD player and it is connected to the TV via HDMI, you will hear only 2 channel sounds from the receiver. Using the ARC function for LED 6500 Series and above, for PDP TV You can listen to sound from the TV through a receiver connected using an HDMI cable without connecting a separate optical cable. To listen to sound through a receiver using the ARC function, go to Receiver screen (System → Anynet+ (HDMI-CEC) → Receiver). Then select Receiver and set to On. N To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the HDMI IN 2 (ARC) port. N To disable the ARC function, set the Receiver to Off. Even if the TV transmits the ARC signal continuously, the receiver will be blocked from receiving the signal.Troubleshooting Menu → Support → Self Diagnosis → Troubleshooting To view a list of all troubleshooting items, go to e-Manual home screen (Menu → Support → e-Manual → Other Information) or press the SUPPORT button, and then search a desired item by selecting a chapter. Other InformationPicture Quality (Troubleshooting) First, perform the Picture Test and to see if your TV is properly displaying the test image. (Go to Menu → Support → Self Diagnosis → Picture Test) If the test image is properly displayed, the poor picture may be caused by the source or signal. The TV image does not look as good as it did in the store. Œ If you have an analogue cable / set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (High Definition) picture quality. Œ Many HD channels are up scaled from SD(Standard Definition) contents. Œ Cable / Satellite subscribers: Try HD stations from the channel lineup.Œ Aerial connection: Try HD stations after performing Auto Tuning. Œ Adjust the Cable/Set top box video output resolution to 1080i or 720p. Œ Make sure you are watching the TV at the minimum recommended distance based on the size and definition of the signal. The picture is distorted: macro block error, small block, dots, pixelizationŒ The compression of video contents may cause picture distortion especially in fast moving pictures such as those in sports and action movies. Œ A weak or bad quality signal can cause picture distortion. This is not a TV issue. Œ Mobile phones used close to the TV (cca up to 1m) may cause noise in the picture on analogue channels.Colour is wrong or missing. Œ If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or loose connections may cause colour problems or a blank screen. There is poor colour or brightness. Œ Adjust the Picture options in the TV menu (go to Picture mode / Colour / Brightness / Sharpness) Œ Adjust the Energy Saving option in the TV menu (go to Menu → System → Eco Solution → Energy Saving) Œ Try resetting the picture to view the default picture settings (go to Menu → Picture → Reset Picture) There is a dotted line on the edge of the screen.Œ If the Picture Size is set to Screen Fit, change it to 16:9. Œ Change cable / satellite box resolution. The picture is black and white. Œ If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component on the TV.When changing channels, the picture freezes or is distorted or delayed. Œ If the TV is connected to a cable box, try to reset the box. (Disconnect and then reconnect the AC cord and wait until the cable box reboots. It may take up to 20 minutes.) Œ Set the output resolution of the cable box to 1080i or 720p.Sound Quality (Troubleshooting) First, perform the Sound Test to determine if your TV audio is operating properly. (Go to Menu → Support → Self Diagnosis → Sound Test) If the audio is OK, the sound problem may caused by the source or signal. There is no sound or the sound is too low at maximum volume. Œ Check the volume setting of the device (Cable/Sat Box, DVD, Blu-ray etc.) connected to your TV. The picture is good but there is no sound. Œ Set the Speaker Select option to TV Speaker in the Sound menu. Œ If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV. Œ If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s audio option to HDMI if you have the box connected to your TV using an HDMI cable. Œ If you are using a DVI to HDMI cable, a separate audio cable is required. Œ If your TV has a headphone jack, make sure there is nothing plugged into it. Œ Reboot the connected device by disconnecting, and then reconnecting device’s power cable. The speakers are making an inappropriate noise. Œ Check the cable connections. Make sure a video cable is not connected to an audio input. Œ For aerial or cable connections, check the signal strength. Low signal level may cause sound distortion.Œ Perform a Sound Test. (Support → Self Diagnosis → Sound Test)No Picture, No Video (Troubleshooting) The TV won’t turn on. Œ Make sure the AC power cord is securely plugged in to the wall outlet and the TV. Œ Make sure the wall outlet is working. Œ Try pressing the P button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “The remote control does not work” below. The TV turns off automatically. Œ Ensure the Sleep Timer is set to Off in the Setup menu. Œ If your PC is connected to the TV, check your PC power settings. Œ Make sure the AC power cord is plugged in securely to the wall outlet and the TV. Œ When watching TV from an aerial or cable connection, the TV will turn off after 10~15 minutes if there is no signal. There is no picture/Video. Œ Check cable connections (remove and reconnect all cables connected to the TV and external devices). Œ Set your external device’s (Cable / Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV. Œ Make sure your connected devices are powered on. Œ Be sure to select the TV’s correct source by select Source using your remote.RF (Cable / Aerial) Connection (Troubleshooting) The TV is not receiving all channels. Œ Make sure the Aerial cable is connected securely. Œ Please try Setup to add available channels to the channel list. Go to Menu → System → Setup and wait for all available channels to be stored.Œ Verify the Aerial is positioned correctly. The picture is distorted: macro block error, small block, dots, pixelization. Œ The compression of video contents may cause picture distortion, especially with fast moving pictures such as those in sports and action movies. Œ A weak signal can cause picture distortion. This is not a TV problem.PC Connection (Troubleshooting) A “Mode Not Supported” message appears. Œ Set your PC’s output resolution so it matches the resolution supported by the TV. The video is OK but there is no audio. Œ If you are using an HDMI connection, check the audio output setting on your PC.Network Connection (Troubleshooting) The wireless network connection failed. Œ The Samsung Wireless LAN adapter is required to use a wireless network. for LED 5500 - 5700 series and PDP 550 - 570 series Œ Make sure the TV is connected to a wireless IP sharer (router).Recording / Timeshift (Troubleshooting) The USB device is not recognized or a Device Format, Checking Device or Device Performance Test fails. Œ See the manual for the USB device to check that the USB device supports recording. Œ If the USB device has a lock, ensure it is off. Œ Check that the USB device can be formatted when connected to the PC. Connect the USB to the TV and format it. (Formatting may fail intermittently.) Œ If a Device Performance Test or formatting failed, it means that there is a problem with the USB hardware or the performance of the USB hardware is too low. A message prompts me to format a USB device that has been working well. Œ If the USB device has a lock, ensure it is off. Œ Recover the USB device using the recovery function in Checking Device. The recording function does not work. Œ Check that a USB device is connected. Œ Check that the channel is a recordable digital channel. Œ If the signal is weak or does not exist, the recording function will automatically be closed. Œ The TV will not record if the USB device has no free memory space. Check that this is not the case. Timeshift Mode does not work. Œ Check that a USB device is connected.Œ Radio channels and analogue broadcasts are not supported. Œ Data broadcast channels are not supported. Œ If the signal is weak or does not exist, the Timeshift Mode function will automatically be closed. Œ Timeshift Mode cannot be performed if the USB device has no free memory space. Check that this is not the case.Œ USB memory stick is not supported. Please use the USB HDD type. A message indicates a performance test failure, and the recording and Timeshift Mode functions do not work. Œ These problems may occur if you use a low-performance USB device that does not support recording. We recommend using a USB HDD with at least 5 400 rpm, but a USB HDD of RAID type is not supported. A scheduled recording has failed. Œ A scheduled recording is disabled for certain operations (formatting, performance test, error checking, deleting) that access the file system of a USB device. Œ If there is no USB device connected, the TV will not record even if the scheduled time is reached.Œ The TV will not record if the USB device has no free memory space. Check that this is not the case. Œ If you record a channel locked with Programme Rating Lock, the PIN input window will appear when you try to play back the recording. Several recording devices are connected but the TV stopped recording. Œ If multiple recording devices are connected and the device set as Default Recording Device has no free memory space, the recording function will be closed. Attempt recording again. The device with the most free memory space will automatically be set as Default Recording Device and the TV will start recording.Others (Troubleshooting) The picture won’t display in full screen. Œ HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents. Œ Black bars will appear on the top and bottom of the screen when you watch movies that have aspect ratios different from your TV.Œ Adjust the picture size options on your external device or set the TV picture size to full screen. The remote control does not work. Œ Replace the remote control batteries with the poles (+ / –) in the right direction. Œ Clean the sensor’s transmission window on the remote. Œ Try pointing the remote directly at the TV from 5~6 feet away. The cable/set top box remote control doesn’t turn the TV on or off, or adjust the volume. Œ Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user manual for the SAMSUNG TV code. A “Mode Not Supported” message appears.Œ Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. Refer to the resolution settings in the User manual. There is a plastic smell from the TV. Œ This smell is normal and will dissipate in a short time. The TV Signal Information is unavailable in the Self Diagnosis menu. Œ This function is only available with digital channels from an Aerial / RF/ Coax connection. The TV is tilted to the side. Œ Remove the base stand from the TV and reassemble the stand. There are difficulties assembling the stand base.Œ Make sure the TV is placed on a flat surface. It is necessary to use magnetized screw driver if you cannot remove the screws from the TV. The channel menu is greyed out. (Unavailable) Œ The Channel menu is only available when you select the TV source.Your settings are lost after 30 minutes or every time the TV is turned off. Œ If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change the settings from Store Demo mode to Home Use mode in the Setup procedure. Select TV in the Source using your remote, and go to Menu → System → Setup. It is possible to disable the Store Demo via Tools as well. (Tools → Demo → Off) You have intermittent loss of audio or video. Œ Check the cable connections and reconnect them. Œ Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors. You see small particles when you look closely at the edge of the frame of the TV. Œ This is part of the product’s design and is not a defect. The PIP menu is not available. Œ PIP functionality is only available when you are using a HDMI or components source. The message “Scramble signal” or “Weak Signal/No Signal” appears. Œ If you are using a CAM CARD (CI / CI+), check that it is installed into the common interface slot. Œ If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again.You turned the TV off 45 minutes ago, and it turned on again. Œ It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst your watching TV. There are recurrent picture/ sound issues. Œ Check and change the signal/source.A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture. Œ To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture. You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com → Support → Downloads) by USB.POP (TV’s internal banner ad) appears on the screen. Select Home Use under Setup mode. For details, refer to the Setup Feature. The Plasma TV is making humming noise. for PDP TV Plasma TVs typically make a soft humming sound. This is normal. It’s caused by the electrical charges that are used to create the images on the screen. If the humming sound is loud, you may have set the brightness on the TV too high. Try setting the brightness lower. You can also have loud humming if the back of your Plasma TV is too close to a wall or other hard surface. Also, try rerouting your connection cables. An improperly installed wall mount can also create excessive noise.Image Retention (Burn In) Issue. for PDP TV To minimize the possibility of screen burn, this unit is equipped with Pixel Shift screen burn reduction technology. Pixel Shift lets you set the picture so it moves slightly up and down (Vertical Line) and side to side (Horizontal Dot). The regular, slight movement of the picture reduces screen burn in.Anynet+ (HDMI-CEC) (Troubleshooting) Anynet+ does not work. Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. You can connect only one receiver (home theatre). Check if the Anynet+ device power cord is properly connected. Check the Anynet+ device’s Video/Audio/HDMI cable connections. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Check whether the TV remote control is in TV mode. Check whether the remote control is Anynet+ compatible. Anynet+ doesn’t work in certain situations. (Searching channels, operating Smart Hub or Setup, etc.) If you have removed and then reconnected the HDMI cable, please make sure to search devices again or turn your TV off and on again. I want to start Anynet+. Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On. (Menu → System → Anynet+ (HDMICEC)) Open the Tools menu using your remote and then select Anynet+ (HDMICEC). Then select a menu you want. I want to exit Anynet+. Select View TV in the Anynet+ menu. Go to the Source screen using your remote and select a non- Anynet+ device. The message Connecting to Anynet+ device ... appears on the screen.You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. Use the remote control after the TV has completed Anynet+ configuration or has finished switching to Anynet+. The Anynet+ device does not play. You cannot use the play function when Setup is in progress.The connected device is not displayed. Check whether or not the device supports Anynet+ functions. Check whether or not the HDMI cable is properly connected. Check whether Anynet+ (HDMI-CEC) is set to On. (Menu → System → Anynet+ (HDMI-CEC)) Search Anynet+ devices again. Anynet+ requires an HDMI connection. Make sure the device is connected to your TV with an HDMI cable. Some HDMI cables may not support Anynet+ functions. If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected, please repeat the device scan. The TV sound is not output through the receiver. Connect the optical cable between TV and the receiver. The ARC function enables digital output of sound using the HDMI IN 2(ARC) port and can only be operated when the TV is connected to an audio receiver that supports the ARC function.AllShare Play (Troubleshooting) This file may not be playable properly. This may appear because of the high bit rate of the content. Content generally will play but could experience some playability issue.Smart Hub (Troubleshooting) Some application contents only appear in English. How can I change the language? The Application content language may be different from the application user interface language. The ability to change the language depends on the service provider. Some application services do not work.Check with the service provider. Refer to the help website for application service provider information. When a network error occurs, I can only use the setting menu. If network connection doesn’t work, your service might be limited, as all functions except the setting menu need to be connect to the internet.Web Browser (Troubleshooting) 1. To open Web Browser, select Web Browser in Smart Hub. Unlike a PC, the Web Browser may be displayed differently. 2. The Web Browser is not compatible with Java applications. 3. When you attempt to download a file, and the file could not be saved, an error message will appear. 4. Access may be blocked to some websites or to web browsers operated by certain businesses. 5. Playback of Flash video may be restricted. 6. E-commerce, for purchasing products online, is not supported. 7. Scrolling a web page that allows only part (and not all) of the page to be scrolled may cause corrupted characters. 8. ActiveX is not supported.9. Some options cannot be accessed in Link Browsing mode. (To access such options, switch to Pointer Browsing mode.) 10.Some text may appear corrupted because the number of supported fonts is limited. 11.The response to a command on the remote or the screen display may be delayed temporarily if a web page is currently loading.12.Copy and Paste are not supported. 13.When writing emails or posting messages, some functions (Such as changing the size or colours.) may not be supported. 14.The number of bookmarks and logs that can be saved is limited. 15.The maximum number of windows that can open at the same time may vary depending on browsing conditions or the TV model.16.The web browsing speed depends on the network conditions. 17.PIP will automatically be deactivated if a video is played in the browser. Videos may not commence playback after PIP interruption and a possible refresh for the page may be required. 18.The Web Browser can play MP3 audio files only. 19.The function for importing or exporting bookmarks is compatible with bookmark files in a particular file format only. (Compatible format: Netscape-bookmark-file-1) 20.When you import or export bookmarks, the folder tree is not included. 21.If you import the bookmark file to a Computer from the TV, the bookmark file will be saved in “Samsung Smart TV Bookmark” folder. 22.If the time is not set in the menu (Menu → System → Time → Clock), the history information may not be saved. 23. Visited web site history is saved in chronological order and will be removed from the list by oldest page accessed. 24.Some video or audio content may not play during Flash playback depending on the video/audio codec supported.25.A sudden change in the picture brightness inside the video window may affect the brightness of the surrounding stationary picture. for PDP TV 26. Video Content that requires Flash Player 10.2 or higher is not supported.Supported Subtitle and AllShare Play file formats Subtitle External – MPEG-4 timed text (.ttxt) – SAMI (.smi) – SubRip (.srt) – SubViewer (.sub) – Micro (.sub or .txt)– SubStation Alpha (.ssa) – Advanced SubStation Alpha (.ass) – Powerdivx (.psb) Internal – Xsub Container: AVI – SubStation Alpha Container: MKV – Advanced SubStation Alpha Container: MKV– SubRip Container: MKV – MPEG-4 timed text Container: MKV Supported image resolutions File Extension Type Resolution *.jpg JPG 15360 x 8640 *.png PNG 1920 x 1080 *.bmp BMP 1920 x 1080 *.mpo MPO 15360 x 8640Supported music file formats File Extension Type Codec Comments *.mp3 MP3 MPEG1 Audio Layer 3 *.m4a *.mpa *.aac *.3ga MPEG4 AAC *.flac FLAC FLAC The Seek (jump) function is not supported. Supports up to 2 channel *.ogg OGG Vorbis Supports up to 2 channel *.wma WMA WMA WMA 9, 10 Pro supports up to 5.1 channel and M2 profile (except LBR mode of M0). Video CodecFile Extension Container Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Audio Codec *.avi *.mkv *.asf *.wmv *.mp4 *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.mov *.flv *.vob *.svi *.m2ts *.mts *.webm *.divx AVI MKV ASF MP4 3GP VRO VOB PS TS WebM DIVX 3.11/4.x/5.x/6.1 1920 x 1080 6 – 30 30 AC3 LPCM ADMPCM(IMA, MS) AAC HE-AAC WMA DD+ MPEG(MP3) DTS Core G.711(A-Law, μ-Law) MPEG4 SP/ASP H.264 BP/MP/HP Motion JPEG 640 x 480 8 Window Media Video v9 1920 x 1080 30 MPEG2 MPEG1 VP8 VP6 640 x 480 4 Other Restriction N Video content will not play, or not play correctly, if there is an error in the content or the container. N Sound or video may not work if the contents have a standard bit rate/ frame rate above the compatible Frame/sec listed in the table above. N If the Index Table is in error, the Seek (Jump) function is not supported. N When you play video over a network connection, the video may not be played smoothly. N The menu may take longer to appear if the video’s bit rate exceeds 10Mbps. N Some USB/digital camera devices may not be compatible with the player. Video decoder ● Supports up to H.264, Level 4.1. ● H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported. ● For all Video codecs except MVC, VP8, VP6: – Below 1280 x 720: 60 frame max – Above 1280 x 720: 30 frame max – GMC is not supported. ● Supports only SVAF Top/Bottom and Side by Side. ● Supports only BD MVC Spec. Audio decoder ● WMA 9, 10 Pro supports up to 5.1 channel and M2 profile (except LBR mode of M0). ● WMA lossless audio is not supported. ● If Vorbis is only in WebM container, supports up to 2 channel.Data Service Allows the user to use information (text, still images, graphics, documents, software, etc.) transmitted via broadcast media. Auto Run Data Service (On / Off) for Italy Menu → System → Auto Run Data Service Sets whether or not to automatically run data service. Auto Run Data Service automatically runs data service without user intervention. N If any other secondary function is under way, Auto Run Data Service may not work. Using Data Service If the channel you are currently watching provides data service, you can enjoy a variety of data services by select a using your remote. N Provided Data Service information may vary depending on broadcast. N While using data service, changing the channel using the numeric functions may not be possible depending on the service. 1. Select a using your remote. Select a desired service. N If Auto Run Data Service is On, the data service will automatically run with loading banner. In this case, the a function does not work. 2. Select a using your remote. The data service screen will be displayed. 3. Move to a desired option by your remote control on the data service screen and then select OK. The selected service will be started. N If a Colour function of a certain function appears on the screen, you can use the offered function by select corresponded function.4. If you select EXIT, data service will be closed. Main Data Service buttons and their functions ● a (Data Service) Displays the Data Service list and immediately starts Data Service. ● BACK Returns to the previous screen. ● Colour ButtonPerform functions corresponding to each Colour button image displayed on the screen during Data Service. N Operations may differ depending on the service provider. ● Symbol Text can be inputted using the numbers and letters printed on and above the numeric keys on the remote control. If you input the numeric keys on the remote control one by one into the blank where the cursor is located on the text input screen, the corresponding lettering, numbers or special characters will be displayed. e.g., if you press the number 3 key in rapid succession, then the assigned letters (D, E, and F) and the number 3 will alternately appear in order of input. ● TEXT Switches to teletext mode or Returns to the previous screen.N Operations may differ depending on the service provider. ● u / d / l / r Moves the Data Service menu up, down, left and right. ● OK Runs a selected item. ● EXIT Stops a running Data Service.HbbTV (Depending on the country) You will be able to access services from entertainment providers, online providers and CE manufactures through the HbbTV. N In some countries, HbbTV is a data service. N This service may be supported in other countries. N Some broadcasting may not support the HbbTV. 1. HbbTV is turned off by default. To use HbbTV, go to System → Data Service and set it Enable. (Depending on the country) 2. HbbTV is not available when Timeshift is running or when a recorded video is being played back. 3. An application on HbbTV may malfunction temporarily depending on the circumstances of the broadcast station or application provider. 4. An application is only available for use on HbbTV when the TV network is connected to an external network. The application may malfunction depending on the network conditions. 5. If the current channel is compatible with both the HbbTV and non-HbbTV text input modes, activate TTX by select TTX key twice. ● When the screen indicates (with the a, etc.) that HbbTV is being accessed. ● Select TTX using your remote, once to enter the HbbTV text-input mode. ● Select TTX using your remote, twice to enter the non-HbbTV text-input mode.Connecting to a TV Viewing Card slot To connect the CI CARD Adapter, follow these steps: for LED 4500~6300 Series and PDP TV Using the “CI or CI+ CARD” To watch paid channels, the “CI or CI+ CARD” must be inserted. ● If you don’t insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”. ● The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. ● When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated. NOTE – You must obtain a “CI or CI+ CARD” from a local cable service provider. – When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.– Insert the “CI or CI+ CARD” in the direction marked on the card. – The location of the COMMON INTERFACE slot may be different depending on the model. – “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. – If you have any problems, please contact a service provider. – Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or will not be seen. To connect the CI CARD Adapter, follow these steps: for LED 6500 Series and above N We recommend attaching the adapter before installing the wall mount, or inserting the “CI or CI+ CARD”. 1. Insert the CI CARD Adapter into the two holes on the product 1. N Please find two holes on the rear of the TV. Two holes are beside the COMMON INTERFACE port. 2. Connect the CI CARD Adapter into the COMMON INTERFACE port on the product 2.3. Insert the “CI or CI+ CARD” Warning We recommend that you insert the CI card before you mount the TV on a wall. It may be difficult to insert after the mounting. Insert the card after attaching the CI-Module on TV. It is difficult to attach the module if you insert the card before attaching.Using the “CI or CI+ CARD” To watch paid channels, the “CI or CI+ CARD” must be inserted. ● If you don’t insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”. ● The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. ● When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated. NOTE – You must obtain a “CI or CI+ CARD” from a local cable service provider.– When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it. – Insert the “CI or CI+ CARD” in the direction marked on the card. – The location of the COMMON INTERFACE slot may be different depending on the model.Teletext Feature (Depending on the country) The index page of the Teletext service gives you information on how to use the Service. For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed. N You can change Teletext pages by select numeric using your remote control. / Teletext on / mix / off: Activates the Teletext mode for the current channel. Press the button twice to overlap the Teletext mode with the current broadcasting screen. Press it one more time to exit teletext. 8 Store: Stores the Teletext pages. 4 Size: Displays the teletext on the upper half of the screen in double-size. To move the text to the lower half of the screen, press it again. For normal display, press it once again. 9 Hold: Holds the display at the current page, in the case that there are several secondary pages that follow automatically. To undo, press it again. Colour buttons (red, green, yellow, blue): If the FASTEXT system is used by the broadcasting company, the different topics on a Teletext page are colourcoded and can be selected by coloured buttons. Press the colour corresponding to the topic of your choice. A new colour coded page is displayed. Items can be selected in the same way. To display the previous or next page, select corresponding coloured button. 0 Mode: Selects the Teletext mode (LIST / FLOF). If pressed during LIST mode, switches the mode to List save mode. In List save mode, you can save a Teletext page into a list using the 8 (store) button. 1 Sub-page: Displays the available sub-page. 2 Page up: Displays the next Teletext page. 3 Page down: Displays the previous Teletext page. 6 Index: Displays the index (contents) page at any time while you are viewing Teletext. 5 Reveal: Displays the hidden text (answers to quiz games, for example). To display the normal screen, press it again. 7 Cancel: Shrinks the Teletext display to overlap with the current broadcast. Typical Teletext pagePart Contents A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text. F Status information. FASTEXT information.Anti-theft Kensington Lock A Kensington Lock is a device you can use to physically fix your TV in place when using it in a public place. You wrap the Kensington Lock’s cable 1 2 around a large, immobile object and then attach the lock to the Kensington slot on the back of the TV. The appearance and locking method may differ from the illustration below depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use. The Kensington Lock is not supplied by Samsung.N Please find a “K” icon on the rear of the TV. The Kensington slot is beside the “K” icon. To lock the product, follow these steps: 1. Wrap the Kensington Lock cable around a large, stationary object such as desk or chair. 2. Slide the end of the cable with the lock attached through the looped end of the Kensington Lock cable.3. Insert the locking device into the Kensington slot on the product. 4. Lock the lock. N These are general instructions. For exact instructions, see the User manual supplied with the locking device. N The locking device has to be purchased separately. N The location of the Kensington slot may be different depending on the TV model.Licence Open Source Licence Notice In the case of using open source software, Open Source Licences are available on the product menu. Open Source Licence Notice is written only English. DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under licence. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274TheaterSound, SRS and symbol are trademarks of SRS Labs, Inc. TheaterSound technology is incorporated under licence from SRS Lab, Inc. Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product Includes software. ⓒ DTS, Inc. All Rights Reserved. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.Trademark: Rovi and Rovi Guide are trademarks of Rovi Corporation and/or its subsidiaries. Licence: The Rovi Guide system is manufactured under licence from Rovi Corporation and/or its subsidiaries. Patent: The Rovi Guide system is protected by patents and patent applications filed in the US, Europe, and other countries including one or more of the United States patents 6,396,546; 5,940,073; 6,239,794 issued to Rovi Corporation and/or its subsidiaries. Disclaimer: Rovi Corporation and/or its subsidiaries and related affiliates are not in any way liable for the accuracy or availability of the programme schedule information or other data in the Rovi Guide system and cannot guarantee service availability in your area. In no event shall Rovi Corporation and/ or its related affiliates be liable for any damages in connection with the accuracy or availability of the programme schedule information or other data in the Rovi Guide system. Plasma TV user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model _____________Serial No. _____________ E-MANUAL © 2011 Samsung Electronics Co., Ltd. All rights reserved. BN68-03497E-03 Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Customer Care Centre Web Site AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com/at BELGIUM 02-201-24-18 www.samsung.com/be (Dutch) www.samsung.com/be_fr (French) CZECH 800 - SAMSUNG (800-726786) www.samsung.com/cz Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8 DENMARK 70 70 19 70 www.samsung.com/dk FINLAND 030 - 6227 515 www.samsung.com/fi FRANCE 01 48 63 00 00 www.samsung.com/fr GERMANY 01805 - SAMSUNG (726-7864 € 0,14/Min) www.samsung.de HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com/hu ITALIA 800-SAMSUNG (726-7864) www.samsung.com/it LUXEMBURG 261 03 710 www.samsung.com/lu NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com/nl NORWAY 815-56 480 www.samsung.com/no POLAND 0 801 1SAMSUNG (172678) 022-607-93-33 www.samsung.com/pl PORTUGAL 80820-SAMSUNG (726-7864) www.samsung.com/pt SLOVAKIA 0800-SAMSUNG (726-7864) www.samsung.com/sk SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com/es SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com/se TURKEY 444 77 11 www.samsung.com/tr U.K 0845 SAMSUNG (7267864) www.samsung.com/uk EIRE 0818 717100 www.samsung.com/ie SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) www.samsung.com/ch www.samsung.com/ch_fr/(French) LITHUANIA 8-800-77777 www.samsung.com/lt LATVIA 8000-7267 www.samsung.com/lv ESTONIA 800-7267 www.samsung.com/ee [PD490-XN_ZF]BN68-03497E-02L04.indb 1 2011-03-07 오후 5:24:20English - 2 For more information on how to use e-Manual (p. 14) Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Digital TV notice 1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal. 2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and so on, are not included in this specification. So, they cannot be workable at this moment. 3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed. 4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business. 5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers. 6. For more information, please contact your local Samsung customer care centre. ✎ The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconfiguring TV setting or not. User Instructions • Screen Image retention Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. • Heat on the top of the Plasma TV The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product. • The product is making a “cracking” noise. A “cracking” noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or humidity. This is normal and not a defect of the unit. • Cell Defects The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. • Avoid operating the TV at temperatures below 41°F (5°C) • A still image displayed too long may cause permanent damage to the PDP Panel. Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to the screen. Damages caused by the above effect are not covered by the Warranty. • After-images on the Screen. Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the “brightness” and “contrast” when displaying still images for a long time. • Warranty Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty. Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. [PD490-XN_ZF]BN68-03497E-02L04.indb 2 2011-03-07 오후 5:24:21English - 3 Accessories ✎Please make sure the following items are included with your TV. If any items are missing, contact your dealer. ✎The items’ colours and shapes may vary depending on the models. ✎Cables not included in the package contents can be purchased separately. ✎Check that there is no accessory hidden behind packing materials when you open the box. [CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET • Remote Control & Batteries (AAA x 2) • Power Cord • Owner’s Instructions • Cleaning-Cloth • Warranty Card (Not available in some locations) / Safety Guide 43 inches model Ferrite Core (2EA) ✎Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure. x A Minimum distance between the ferrite core and the end of the cord inserted in the TV: 6~8 inches (15~20 cm) x B Maximum distance between the ferrite core and the other end of the cord inserted in the AC outlet: 3/4 inches (2 cm) Power Cord A B [PD490-XN_ZF]BN68-03497E-02L04.indb 3 2011-03-07 오후 5:24:21English - 4 51 inches model Ferrite Core (2EA) Ferrite Core (1EA) ✎Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure. x A Minimum distance between the ferrite core and the end of the cord inserted in the TV: 6~8 inches (15~20 cm) x B Maximum distance between the ferrite core and the other end of the cord inserted in the AC outlet: 3/4 inches (2 cm) Power Cord ✎Ferrite Core: The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure. Antenna Cable / Component Cable (sold separately) • An administration fee may be charged if either – (a) an engineer is called out at your request and there is no defect in the product (i.e. where you have failed to read this user manual) – (b) you bring the unit to a repair centre and there is no defect in the product (i.e. where you have failed to read this user manual). • The amount of such administration charge will be advised to you before any work or home visit is carried out. A B [PD490-XN_ZF]BN68-03497E-02L04.indb 4 2011-03-07 오후 5:24:22English - 5 Viewing the Control Panel ✎The product colour and shape may vary depending on the model. Remote control sensor Aim the remote control towards this spot on the TV. Power Indicator Blinks and turns off when the power is on and lights up in standby mode. SOURCEE Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control. MENU Displays an on-screen menu, the OSD (on screen display) of your TV’s y features. Adjusts the volume. In the OSD, use the y buttons as you would use z the ◄ and ► buttons on the remote control. Changes the channels. In the OSD, use the z buttons as you would use the ▼ and ▲ buttons on the remote control. P (Power) Turns the TV on or off. Standby mode Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord. Securing the Installation Space Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product. ✎When using a stand or wall-mount, use parts provided by Samsung Electronics only. x If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling. ✎The appearance may differ depending on the product. ✎Be careful when you contact the TV because some parts can be somewhat hot. Installation with a stand. Installation with a wall-mount. 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm Control Panel [PD490-XN_ZF]BN68-03497E-02L04.indb 5 2011-03-07 오후 5:24:22English - 6 Viewing the Remote Control ✎This is a special remote control for the visually impaired and has Braille points on the Channel and Number buttons. Installing batteries (Battery size: AAA) Turns the TV on and off. Displays and selects the available video sources. Returns to the previous channel. Cuts off the sound temporarily. Changes channels. Displays channel lists on the screen. Displays the EPG (Electronic Programme Guide). Displays information on the TV screen. u/d/l/r : Move the cursor on-screen menu item. ENTERE: Selects the menu and changes the corresponding item value. Exits the menu. Have direct access to channels. Adjusts the volume. Alternately select Teletext ON, Double, Mix or OFF. Opens the OSD. Quickly select frequently used functions. Displays the Content Home, which includes Watch TV, My Downloads and Source. Returns to the previous menu. These buttons are for the Channel Manager, My Downloads menu, etc. Use these buttons in My Downloads and Anynet+ modes. P.MODE: Press to select the Picture Mode. W: Sets the video, which provided with 3D signal. DUAL f-g: Sound effect selection. E-MANUAL: Displays the e-Manual. P.SIZE: Selects the Picture Size. AD/SUBT.: Turns the audio description on and off (not available in some locations). / Displays digital subtitles. [PD490-XN_ZF]BN68-03497E-02L04.indb 6 2011-03-07 오후 5:24:23English - 7 Changing the Input Source Source Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box /STB satellite receiver. 1. Press the SOURCE button on your remote. 2. Select a desired external input source. ✎You can change the view mode among the All and Connected by pressing the l or r button. ■ TV / Ext. / PC / HDMI1/DVI / HDMI2 / HDMI3 / AV / Component / USB ✎In the Source, connected inputs will be highlighted. ✎Ext. and PC always stay activated. ✎If the connected external devices are not highlighted, press the red button. The TV will search for connected devices. Edit Name In the Source, press the TOOLS button, and then you can set an external input sources name you want. ■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier. ✎When connecting a PC to the HDMI IN 1(DVI) port with HDMI cable, you should set the TV to PC mode under Edit Name. (PS51D490) ✎When connecting a PC to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under Edit Name. (PS51D490) ✎When connecting an AV devices to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI Devices mode under Edit Name. (PS43D490, PS51D490) Information You can see detailed information about the selected external device. Connecting to an Antenna When the TV is initially powered on, basic settings proceed automatically. ✎Preset: Connecting the mains and antenna. ✎The PDP device may interfere with an amateur radio or AM radio. ✎When using two-way radio mobile and portable units or amateur radio or AM radio near by your TV, this may cause the TV to malfunction. Cable VHF/UHF Antenna or Power Input [PD490-XN_ZF]BN68-03497E-02L04.indb 7 2011-03-07 오후 5:24:24English - 8 Plug & Play (Initial Setup) When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERP button. Plug & Play is available only when the Source is set to TV. ✎Before turning on the TV, make sure the antenna cable is connected (p. 6). ✎To return to the previous step, press the Red button. 1 Selecting a language Press the ▲ or ▼ button, then press the ENTERE button. Select the desired OSD (On Screen Display) language. 2 Selecting Store Demo or Home Use Press the ◄ or ► button, then press the ENTERE button. Select the Home Use mode. Store Demo mode is for retail environments. To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec. Store Demo is only for shop display. If you select it, several functions are not able to use. Please select Home Use when you watch at home. 3 Selecting a country Press the ▲ or ▼ button, then press the ENTERE button. Select the appropriate country. (depending on the country) ✎After selecting the country in the Country menu, some models may proceed with an additional option to setup the pin number. ✎When you input the PIN number, “0-0-0-0” is not available. 4 Setting the Clock Mode Set the Clock Mode automatically or manually. Auto: Select the time zone where you are located. Manual: Allows you to manually set the current date and time. 5 Selecting an antenna Press the ▲ or ▼ button, then press the ENTERE button. Select the Antenna source to memorise. 6 Selecting a channel Press the ▲ or ▼ button, then press the ENTERE button. Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel → Auto Tuning. 7 Enjoy your TV. Press the ENTERE button. If You Want to Reset This Feature... You should do Plug & Play (MENU → System) again at home although you did in shop. Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0” (except France). If you want to change the PIN number, use the Change PIN function. ✎If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0” (France: “1-1-1-1”): MUTE → 8 → 2 → 4 → POWER (on). P POWER [PD490-XN_ZF]BN68-03497E-02L04.indb 8 2011-03-07 오후 5:24:24English - 9 Connecting to an AV devices ¦ Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, VCR Using an HDMI or an HDMI to DVI cable (up to 1080p) ✎HDMI IN 1(DVI), 2, 3 / PC/DVI AUDIO IN x When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack for video. A DVD, Blu-ray player, HD cable box, or HD STB satellite receiver may require a DVI-HDMI (DVI to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio. x The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade. x Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur. USB HDMI IN HDMI OUT DVI OUT AUDIO OUT R-AUDIO-L W R HDMI connection HDMI to DVI connection [PD490-XN_ZF]BN68-03497E-02L04.indb 9 2011-03-07 오후 5:24:25English - 10 Using a Component (up to 1080p) or an Audio/Video (480i only) and a Scart Cable ✎In Ext. mode, DTV Out supports MPEG SD Video and Audio only. ✎When connecting to AV IN, the colour of the AV IN [Y/VIDEO] jack (green) will not match the video cable (yellow). ✎To obtain the best picture quality, the Component connection is recommended over the A/V connection. AUDIO OUT R-AUDIO-L VIDEO OUT AUDIO OUT R-AUDIO-L PR PB Y COMPONENT OUT EXT Component connection AV connection SCART connection [PD490-XN_ZF]BN68-03497E-02L04.indb 10 2011-03-07 오후 5:24:25English - 11 Connecting to a PC and Audio device ¦ Available devices: digital audio system, amplifier, DVD home theatre, PC Using an Optical (Digital) or a Headphone Connection ✎DIGITAL AUDIO OUT (OPTICAL) x When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system. x 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH. x When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-TopBox) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre. ✎Headphones H: You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled. x Sound function may be restricted when connecting headphones to the TV. x Headphone volume and TV volume are adjusted separately. OPTICAL DVD home theatre connection Headphones connection [PD490-XN_ZF]BN68-03497E-02L04.indb 11 2011-03-07 오후 5:24:26English - 12 ¦ Using an HDMI cable or an HDMI to DVI cable or a D-sub cable ✎Connecting through the HDMI cable may not be supported depending on the PC. Display Modes (D-Sub and an HDMI to DVI Input) • PS43D490: 1024 X 768 @ 60Hz • PS51D490: 1360 X 768 @ 60Hz Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V) PS43D490 PS51D490 IBM 640 x 350 720 x 400 31.469 31.469 70.086 70.087 25.175 28.322 +/- -/+ c c c c MAC 640 x 480 832 x 624 35.000 49.726 66.667 74.551 30.240 57.284 -/- -/- c c c c VESA DMT 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1360 x 768 31.469 37.861 37.500 37.879 48.077 46.875 48.363 56.476 60.023 47.712 59.940 72.809 75.000 60.317 72.188 75.000 60.004 70.069 75.029 60.015 25.175 31.500 31.500 40.000 50.000 49.500 65.000 75.000 78.750 85.500 -/- -/- -/- +/+ +/+ +/+ -/- -/- +/+ +/+ c c c c c c c c c c c c c c c c c c c ✎NOTE x For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. x The interlace mode is not supported. x The set might operate abnormally if a non-standard video format is selected. x Separate and Composite modes are supported. SOG(Sync On Green) is not supported. PC OUT AUDIO OUT AUDIO OUT DVI OUT HDMI OUT PC connection [PD490-XN_ZF]BN68-03497E-02L04.indb 12 2011-03-07 오후 5:24:27English - 13 Connecting to a COMMON INTERFACE slot Using the “CI or CI+ CARD” To watch paid channels, the “CI or CI+ CARD” must be inserted. • If you don’t insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”. • The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. • When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated. ✎NOTE x You must obtain a “CI or CI+ CARD” from a local cable service provider. x When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it. x Insert the “CI or CI+ CARD” in the direction marked on the card. x The location of the COMMON INTERFACE slot may be different depending on the model. x “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. x If you have any problems, please contact a service provider. x Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen. [PD490-XN_ZF]BN68-03497E-02L04.indb 13 2011-03-07 오후 5:24:27English - 14 How to view the e-Manual Screen Display How to toggle between the e-Manual and the corresponding menu(s). ✎This function is not enabled in some menus. Method 1 Method 2 1. Press the red button to select Try Now, if you want to execute the corresponding menu(s). 2. To return to the e-Manual screen, press the E-MANUAL button. 1. Press the ENTERE button when selecting Contents Area. The “Are you sure?” is displayed. Select Yes and then press the ENTERE button. The OSD window will be displayed. 2. To return to the e-Manual screen, press the E-MANUAL button. E-MANUAL You can read the introduction and instructions about the TV features stored in your TV. O MENUm → Support → e-Manual → ENTERE ✎If you want to return to e-Manual, press E-MANUAL button on remote. ✎You can’t use the Try Now function, if the menu is not activated. Basic Features Changing the Preset Picture Mode Adjusting Picture Settings Changing the Picture Size Changing the Picture Options Setting up the TV with Your PC } Index E Enter e Exit TV Screen: Displays the current input source screen. Change the category. Press l or r button to select category you want. Displays the sub-menu list. Press ENTERE button to select submenu you want. Operation Buttons: } Blue (Index): Displays index screen. E Enter: Select a category or sub-menu. e Exit: Exit the e-Manual. Try Now E-MANUAL ‰ Changing the Preset Picture Mode ■ Select your preferred picture type. Picture Mode t • Dynamic: Suitable for a bright room. • Standard: Suitable for a normal environment. • Natural for LED TV / Relax for PDP TV : Suitable for reducing eye strain. • Movie: Suitable for watching movies in a dark room. • Entertain: Suitable for watching movies and games. N It is only available in PC mode. ‰ Changing the Preset Picture Mode O MENUm → Picture → Picture Mode → ENTERE ■ Picture Mode Select your preferred picture type. N When an input source is set to PC, the Picture Mode is only available the Standard and Entertain. • Dynamic: Suitable for a bright room. • Standard: Suitable for a normal environment. • Movie: Suitable for watching movies in a dark room. • Entertain: Suitable for watching movies and games. Basic Features > Changing the Preset Picture Mode (5/10) a Try Now b Home { Zoom } Index L Page e Exit Picture Picture Mode : Standard r Cell Light : 10 Contrast : 100 Brightness : 45 Sharpness : 50 Colour : 50 Tint (G/R) : G50/R50 Screen Adjustment [PD490-XN_ZF]BN68-03497E-02L04.indb 14 2011-03-07 오후 5:24:33English - 15 Viewing the Contents Using the Zoom mode When you view the e-Manual instruction, select the yellow button to magnify the screen. You can scroll through the magnified screen by using the u or d buttons. ✎To return to the previous screen, press the RETURN button. How to search a keyword by using index page ✎This function may not supported depending on the language. 1. If you want to search a keyword, press the blue button to select Index. 2. Press the l or r button to select a character order you want, and then press the ENTERE button. 3. Press the u or d button to select a keyword you want to see, and then press the ENTERE button. 4. You can view the corresponding e-Manual instruction screen. ✎To close the Index screen, press the RETURN button. a Try Now b Home { Zoom } Index L Page e Exit Basic Features > Changing the Preset Picture Mode (5/10) Contents Area: You can view the corresponding contents, if you selected a sub-menu. To move previous or next page, press the l or r button. Operation Buttons: a Red (Try Now): Displays the corresponding menu(s). b Green (Home): Moves to the e-Manual home screen. { Yellow (Zoom): Magnifies a screen. } Blue (Index): Displays index screen. L (Page): Moves to previous or next page. ‰ Changing the Preset Picture Mode O MENUm → Picture → Picture Mode → ENTERE ■ Picture Mode Select your preferred picture type. N When an input source is set to PC, the Picture Mode is only available the Standard and Entertain. • Dynamic: Suitable for a bright room. • Standard: Suitable for a normal environment. • Movie: Suitable for watching movies in a dark room. • Entertain: Suitable for watching movies and games. R Return ‰ Changing the Preset Picture Mode O MENUm → Picture → Picture Mode → ENTERE ■ Picture Mode Select your preferred picture type. N When an input source is set to PC, the Picture Mode is only available the Standard and Entertain. • Dynamic: Suitable for a bright room. • Standard: Suitable for a normal environment. • Movie: Suitable for watching movies in a dark room. • Entertain: Suitable for watching movies and games. [PD490-XN_ZF]BN68-03497E-02L04.indb 15 2011-03-07 오후 5:24:34English - 16 Installing the Wall Mount Installing the Wall Mount Kit The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own. Wall Mount Kit Specifications (VESA) ✎The wall mount kit is not supplied, but sold separately. Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. ✎NOTE x Standard dimensions for wall mount kits are shown in the table below. x When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. x Do not use screws that do not comply with the VESA standard screw specifications. x Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set. x For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications. x Do not fasten the screws that are too strongly; this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. x Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. x Do not mount the TV at more than a 15 degree tilt. Product Family inches VESA Spec. (A * B) Standard Screw Quantity PDP-TV 43~51 400 X 400 M8 4 59~64 600 X 400 ✎Unscrew the hole around before installing Wall-Mount on the wall. Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock. [PD490-XN_ZF]BN68-03497E-02L04.indb 16 2011-03-07 오후 5:24:35English - 17 Troubleshooting If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual. Issues Solutions and Explanations The TV won’t turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the TV. • Make sure the wall outlet is working. • Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “Remote control does not work” below. There is no picture/video. • Check cable connections (remove and reconnect all cables connected to the TV and external devices). • Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV. • Make sure your connected devices are powered on. • Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control. The remote control does not work. • Replace the remote control batteries with the poles (+/–) in the right direction. • Clean the sensor’s transmission window on the remote. • Try pointing the remote directly at the TV from 5~6 feet away. The cable/set top box remote control doesn’t turn the TV on or off, or adjust the volume. • Programme the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for the SAMSUNG TV code. ✎Some of above pictures and functions are available at specific models only. ✎You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com → Support → Downloads) by USB. Licence List of Features Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed without a cable box / STB (Set-Top-Box) satellite receiver. 3D This exciting new feature enables you to view 3D content. Anynet+(HDMI-CEC) Allows you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. My Downloads Allows you to play music files, pictures, and movies saved on a USB device. [PD490-XN_ZF]BN68-03497E-02L04.indb 17 2011-03-07 오후 5:24:35English - 18 Securing the TV to the wall Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided in the included Safety Flyer. For added stability and safety, install the anti-fall device as follows. To Avoid the TV from Falling 1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto the wall. ✎You may need additional material such as an anchor depending on the type of wall. ✎Since the necessary clamps, screws, and string are not supplied, please purchase these additionally. 2. Remove the screws from the back centre of the TV, put the screws into the clamps, and then fasten the screws onto the TV again. ✎Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications. 3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong cable and then tie the string tightly. ✎NOTE x Install the TV near to the wall so that it does not fall backwards. x It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV. x Untie the string before moving the TV. 4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer. Storage and Maintenance ✎If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV. Do not spray water or a cleaning agent directly onto the product. Any liquid that goes into the product may cause a failure, fire, or electric shock. Clean the product with a soft cloth dapped in a small amount of water. Wall [PD490-XN_ZF]BN68-03497E-02L04.indb 18 2011-03-07 오후 5:24:36English - 19 Specifications Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity 10°C to 40°C (50°F to 104°F) 10% to 80%, non-condensing -20°C to 45°C (-4°F to 113°F) 5% to 95%, non-condensing TV System Analogue: B/G, D/K, L, I (Depending on your country selection) Digital: DVB-T/DVB-C Colour/Video System Analogue: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60 Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0 Sound System BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC. HDMI IN Video: 1080 24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i Audio: 2Ch Linear PCM 32/44.1/48kHz, 16/20/24bits. Stand Swivel (Left / Right) -20˚ ~ 20˚ Model Name PS43D490 PS51D490 Screen Size 43 inches (109 cm) 51 inches (128 cm) Sound (Output) 10 W X 2 Dimensions (WxDxH) Body With stand 1011.8 X 56.0 X 622.4 mm 1011.8 X 305.0 X 698.7 mm 1187.8 X 56.0 X 706.6 mm 1187.8 X 305.0 X 782.9 mm Weight Without Stand With Stand 16.0 kg 20.3 kg 22.5 kg 26.8 kg Display Resolution 1024 X 768 1360 X 768 ✎Design and specifications are subject to change without prior notice. ✎For information about power supply, and more about power consumption, refer to the label attached to the product. ✎Hereby, Samsung, declares that this PDP TV is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. [PD490-XN_ZF]BN68-03497E-02L04.indb 19 2011-03-07 오후 5:24:36Declaration of Conformity For the following Product : PDP TV Model(s) : PS43D490, PS51D490 Year of Affixing CE Marking : 2011 Manufactured at: F1: Samsung Electronics Co., Ltd. 416, Maetan 3-Dong, Yeongtong-Gu, Suwon-Si, Gyeonggi-Do, 443-742 Korea F2: Samsung Electronics Slovakia s.r.o Hviezdoslavova 807 924 27 Galanta, Slovak Republic F3: Samsung Electronics Hungarian Co., Ltd. H-5126 Jaszfenyszaru, Samsung ter 1 (Factories name and address) We hereby declare under our sole responsibility that the electrical product above is in compliance with the essential requirements of R&TTE Directive (1995/5/EC), the Low Voltage Directive (2006/95/EC) and Electromagnetic Compatibility Directive (2004/108/EC) by application of EN 60065: 2002+A1:2006+A11:2008 EN55022: 2006+A1:2007 EN61000-3-2:2006 EN 300 328-1 v1.7.1 EN 301 489-17 v1.3.2 :2008 EN61000-3-3:1995+A1:2001+A2:2005 EN55024:1998+A1:2001+A2:2003 EN55013:2001+A1:2003+A2 :2006 EN55020:2007 EN 301 489-1 v1.8.1 :2008 and the Eco-Design Directive (2009/125/EC) implemented by Regulation (EC) No 642/2009 for televisions. The Technical documentation is kept at the below Manufacturer’s address. Manufacturer Samsung Electronics Co., Ltd. 416 Maetan-dong, Young-Tong gu, Suwon, Korea 442-742 05 Jan 2011 (Place and date of issue) Chang Seub Eum / Manager (Name and signature of authorized person) Representative in the EU : Samsung Electronics Euro QA Lab. Blackbushe Business Park Saxony Way, Yateley, Hampshire GU46 6GG, UK 06 Jan 2011 (Place and date of issue) Joong Hoon Choi / Lab. Manager (Name and signature of authorized person) Note : It is not the address of Samsung Service Centre. For the address or the phone number of Samsung Service Centre, see the warranty card or contact the retailer where you purchased your product. ELECTRONICS [PD490-XN_ZF]BN68-03497E-02L04.indb 20 2011-03-07 오후 5:24:37This page is intentionally left blank. [PD490-XN_ZF]BN68-03497E-02L04.indb 21 2011-03-07 오후 5:24:37Français - 2 Pour plus d’informations sur l’utilisation du manuel électronique (p. 14) Les figures et illustrations contenues dans ce mode d’emploi sont fournies pour référence uniquement. Elles peuvent différer de l’aspect réel du produit. La conception et les spécifications du produit sont susceptibles d’être modifiées sans préavis. Avis concernant le téléviseur numérique 1. Les fonctions relatives au téléviseur numérique (DVB) ne sont disponibles que dans les pays ou régions où des signaux terrestres numériques de type DVB-T (MPEG2 et MPEG4 AVC) sont diffusés ou dans lesquels vous avez accès à un service de télévision par câble compatible DVB-C (MPEG2 et MPEG4 AAC). Consultez votre distributeur local pour connaître les possibilités en matière de réception des signaux DVB-T ou DVB-C. 2. DVB-T est la norme du consortium européen pour la diffusion de signaux terrestres de télévision numérique. La norme DVB-C est quant à elle prévue pour la diffusion des signaux de télévision numérique par câble. Certaines fonctions particulières, telles que le guide électronique des programmes (Electric Program Guide - EPG), la vidéo à la demande (Video on Demand - VOD), etc., ne sont toutefois pas incluses dans cette spécification. Dès lors, elles ne seront pas traitées pour l’instant. 3. Bien que ce téléviseur soit conforme aux dernières normes DVB-T et DVB-C (août 2008), il n’est pas garanti qu’il soit compatible avec les futures diffusions de signaux numériques terrestres DVB-T et par câble DVB-C. 4. En fonction du pays ou de la région où vous vous trouvez, certains opérateurs de télévision par câble peuvent facturer des frais supplémentaires pour un tel service. Vous devrez aussi peut-être accepter les termes et conditions de ces sociétés. 5. Il se peut que certaines fonctions de TV numérique ne soient pas disponibles dans certains pays ou certaines régions et que la réception des signaux DVB-C ne soit pas correcte avec tous les opérateurs. 6. Pour plus d’informations, contactez le service client local de Samsung. ✎ Les différentes méthodes de diffusion adoptées en fonction des pays peuvent affecter la qualité de réception du téléviseur. Vérifiez le fonctionnement du téléviseur chez votre revendeur agréé SAMSUNG ou contactez le centre d’appel de Samsung pour savoir s’il est possible d’en améliorer les performances en reconfigurant les réglages. Instructions d’utilisation • Rémanence à l’écran N’affichez pas une image figée (telle qu’elle apparaît sur un jeu vidéo) sur l’écran à plasma au-delà de quelques minutes, sinon cela risquerait de provoquer une rémanence à l’écran. Cette rémanence de l’image est également appelée “brûlure de l’écran”. Pour éviter la rémanence, réduisez le niveau de contraste ou de luminosité de l’écran lorsque vous affichez une image figée. • Chaleur diffusée sur la partie supérieure du téléviseur à écran plasma Le dessus de l’appareil peut chauffer en cas d’utilisation prolongée, car la chaleur s’échappe du panneau par le trou d’aération situé dans la partie supérieure du produit. Ce phénomène est normal et n’indique aucunement la présence d’un défaut ou d’un dysfonctionnement. Il convient cependant d’empêcher les enfants de toucher la partie supérieure de l’écran. • Le produit fait un bruit de “claquement”. Ce bruit de “claquement” risque d’être perceptible lorsque le produit se contracte ou s’étend suite à un changement du milieu ambiant, tel que la température ou l’humidité. Ce phénomène est normal et ne constitue pas un défaut. • Défauts de cellule L’écran à plasma utilise un panneau constitué de 2 360 000 (niveau HD) à 6 221 000 (niveau FHD) pixels dont la fabrication fait appel à une technologie avancée. Il se peut toutefois que quelques points clairs ou sombres apparaissent à l’écran. Ils n’ont aucune incidence sur la performance du produit. • Evitez d’utiliser le téléviseur à des températures inférieures à 5°C (41°F). • Une image figée affichée pendant une période prolongée peut endommager définitivement l’écran PDP. Visionner pendant longtemps le téléviseur à écran plasma en format 4/3 risque de laisser apparaître des traces de bordures sur la gauche, sur la droite et au centre de l’écran. Ces traces sont dues à la différence de luminosité sur l’écran. Lire un DVD ou un jeu vidéo sur console risque de provoquer des effets similaires sur l’écran. Les dommages provoqués par l’effet susmentionné ne sont pas couverts par la garantie. • Images rémanentes à l’écran. L’affichage d’images fixes de jeux vidéo et d’ordinateurs pendant une période excessive peut produire des rémanences. Pour empêcher ce phénomène, réduisez la luminosité et le contraste en cas d’affichage prolongé d’images figées. • Garantie La garantie ne couvre pas les dommages causés par la rémanence. Les brûlures ne sont pas couvertes par la garantie. Les bons gestes de mise au rebut de ce produit (Déchets d’équipements électriques et électroniques) (Applicable dans les pays de l’Union Européenne et dans d’autres pays européens pratiquant le tri sélectif) Ce symbole sur le produit, ses accessoires ou sa documentation indique que ni le produit, ni ses accessoires électroniques usagés (chargeur, casque audio, câble USB, etc.) ne peuvent être jetés avec les autres déchets ménagers. La mise au rebut incontrôlée des déchets présentant des risques environnementaux et de santé publique, veuillez séparer vos produits et accessoires usagés des autres déchets. Vous favoriserez ainsi le recyclage de la matière qui les compose dans le cadre d’un développement durable. Les particuliers sont invités à contacter le magasin leur ayant vendu le produit ou à se renseigner auprès des autorités locales pour connaître les procédures et les points de collecte de ces produits en vue de leur recyclage. Les entreprises et professionnels sont invités à contacter leurs fournisseurs et à consulter les conditions de leur contrat de vente. Ce produit et ses accessoires ne peuvent être jetés avec les autres déchets professionnels et commerciaux. Élimination des piles de ce produit (Applicable aux pays de l’Union européenne et aux autres pays européens dans lesquels des systèmes de collecte sélective sont mis en place) Le symbole sur la batterie, le manuel ou l’emballage indique que les batteries de ce produit ne doivent pas être éliminées en fin de vie avec les autres déchets ménagers. L’indication éventuelle des symboles chimiques Hg, Cd ou Pb signifie que la batterie contient des quantités de mercure, de cadmium ou de plomb supérieures aux niveaux de référence stipulés dans la directive CE 2006/66. Si les batteries ne sont pas correctement éliminées, ces substances peuvent porter préjudice à la santé humaine ou à l’environnement. Afin de protéger les ressources naturelles et d’encourager la réutilisation du matériel, veillez à séparer les batteries des autres types de déchets et à les recycler via votre système local de collecte gratuite des batteries. [PD490-XN_ZF]BN68-03497E-02L04.indb 2 2011-03-07 오후 5:24:37Français - 3 Accessoires ✎Vérifiez que les éléments suivants sont inclus avec votre téléviseur. S’il manque des éléments, contactez votre revendeur. ✎Les couleurs et les formes des éléments peuvent varier en fonction des modèles. ✎Les câbles qui ne se trouvent pas dans le contenu de l’emballage peuvent être achetés séparément. ✎Vérifiez qu’aucun accessoires n’est caché dans l’emballage lorsque vous ouvrez la boîte. [ATTENTION : INSEREZ FERMEMENT DE MANIERE A CE QU’IL NE SE DETACHE PAS • Télécommande et piles (AAA x 2) • Câble d’alimentation • Instructions d’utilisation • Tissu de nettoyage • Carte de garantie (non disponible dans certains pays) / Manuel de sécurité dèle 43 pouces uniquement Blindage magnétique (2EA) ✎Blindage magnétique pour cordon d’alimentation : le blindage magnétique sert à protéger les câbles des interférences. Lors de la connexion d’un câble, ouvrez le blindage magnétique et rabattez-le autour du câble près de la prise, comme illustré. x A Distance maximale entre le blindage magnétique et une extrémité du cordon insérée dans le téléviseur : 6~8 pouces (15~20 cm) x B Distance maximale entre le blindage magnétique et l’autre extrémité du cordon insérée dans la prise CA : 3/4 pouces (2 cm) Câble d’alimentation A B [PD490-XN_ZF]BN68-03497E-02L04.indb 3 2011-03-07 오후 5:24:38Français - 4 Modèle 51 pouces uniquement Blindage magnétique (2EA) Blindage magnétique (1EA) ✎Blindage magnétique pour cordon d’alimentation : le blindage magnétique sert à protéger les câbles des interférences. Lors de la connexion d’un câble, ouvrez le blindage magnétique et rabattez-le autour du câble près de la prise, comme illustré. x A Distance maximale entre le blindage magnétique et une extrémité du cordon insérée dans le téléviseur : 6~8 pouces (15~20 cm) x B Distance maximale entre le blindage magnétique et l’autre extrémité du cordon insérée dans la prise CA : 3/4 pouces (2 cm) Câble d’alimentation ✎Blindage magnétique : le blindage magnétique sert à protéger les câbles des interférences. Lors de la connexion d’un câble, ouvrez le blindage magnétique et rabattez-le autour du câble près de la prise, comme illustré. Cable d’antenne / Câble composante (matériel vendu séparément) • Des frais d’administration peuvent vous être facturés si : – (a) un technicien intervient à votre demande et que le produit ne comporte aucun défaut (c.-à-d. si vous n’avez pas pris la peine de lire le présent manuel d’utilisation) – (b) vous amenez le produit dans un centre de réparation alors qu’il ne comporte aucun défaut – (c.-à-d. si vous n’avez pas pris la peine de lire le présent manuel d’utilisation). • Le montant de ces frais d’administration vous sera signifié avant la réalisation de toute prestation ou visite à domicile. A B [PD490-XN_ZF]BN68-03497E-02L04.indb 4 2011-03-07 오후 5:24:38Français - 5 Présentation du panneau de configuration ✎La couleur et la forme du produit peuvent varier en fonction du modèle. Capteur de la télécommande Dirigez la télécommande vers ce point du téléviseur. Témoin d’alimentation Clignote, puis s’arrête lorsque le téléviseur est allumé. S’allume en mode Veille. SOURCEE Bascule entre toutes les sources d’entrée disponibles. Dans le menu du téléviseur, ce bouton a la même fonction que le bouton ENTERE de la télécommande. MENU Affiche un menu à l’écran OSD (on screen display) reprenant les fonctions de votre y téléviseur. Règle le volume. Dans le menu à l’écran (OSD), utilisez les boutons y de la z même façon que les boutons ◄ et ► de la télécommande. zPermet de modifier les chaînes. Dans le menu à l’écran (OSD), utilisez les boutons de la même façon que les boutons ▼ et ▲ de la télécommande. P (Alimentation) Permet d’allumer et d’éteindre le téléviseur. Mode veille Ne laissez pas le téléviseur en mode Veille pendant de longues périodes (lorsque vous partez en vacances, par exemple). Même s’il est en veille, l’appareil consomme toujours une petite quantité d’énergie. Il est préférable de débrancher le cordon d’alimentation. Sécurisation de l’espace d’installation Maintenez les distances requises entre le produit et les autres objets (par exemple, les murs) afin de garantir une ventilation adaptée. Le non-respect de ces distances peut provoquer un incendie ou un problème au produit en raison d’une augmentation de la température interne de celui-ci. ✎Lors de l’utilisation d’un pied ou d’un support mural, utilisez uniquement les pièces fournies par Samsung Electronics. x L’utilisation de pièces fournies par un autre fabricant peut occasionner un problème au niveau du produit ou la chute de celui-ci, ce qui pourrait vous blesser. ✎L’aspect peut varier en fonction du produit. ✎Soyez prudent lorsque vous touchez le téléviseur, car certaines parties peuvent être brûlantes. Installation avec un pied. Installation avec un support de montage mural. 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm Panneau de configuration [PD490-XN_ZF]BN68-03497E-02L04.indb 5 2011-03-07 오후 5:24:39Français - 6 Présentation de la télécommande ✎Ceci est une télécommande spéciale destinée aux malvoyants. Elle dispose de points Braille sur les touches de chaînes et de volume. Installation des piles (type de pile : AAA) Permet d’allumer et d’éteindre le téléviseur. Permet d’afficher et de sélectionner les sources vidéo disponibles. Permet de revenir à la chaîne précédente. Permet d’arrêter temporairement le son. Permet de changer de chaîne. Permet d’afficher les listes des chaînes à l’écran. Permet d’afficher le EPG (Electronic Programme Guide). permet d’afficher des informations à l’écran. u/d/l/r : permet de déplacer le curseur dans les éléments du menu à l’écran. ENTERE: permet de sélectionner le menu et de modifier la valeur de l’élément correspondante. Permet de quitter le menu. Donne un accès direct aux chaînes. Règle le volume. Choisissez Teletext Activé, Double, Mix ou ARRET. Permet d’ouvrir l’affichage à l’écran. Permet de sélectionner rapidement les fonctions fréquemment utilisées. Affiche le menu Content Home, qui comprend Regarder la TV, Mon contenu et Source. Permet de revenir au menu précédent. Ces boutons sont utilisés dans les menus Gestion chaînes, Mon contenu, etc. Utilisez ces boutons avec les modes Mon contenu et Anynet+. P.MODE : permet de sélectionner le mode Mode Image. W: définit la vidéo fournissant le signal 3D. DUAL f-g : Sélection d’effets sonores. E-MANUAL : affiche le e-Manual. P.SIZE : sélectionne le Format de l’image. AD/SUBT. : permet d’activer ou de désactiver la description audio (non disponible pour tous les pays). / Permet d’afficher les sous-titres numériques. [PD490-XN_ZF]BN68-03497E-02L04.indb 6 2011-03-07 오후 5:24:40Français - 7 Changement de la source d’entrée Source A utiliser pour sélectionner le téléviseur ou d’autres sources d’entrée externes, telles que des lecteurs DVD/Blu-ray, des décodeurs câble ou des récepteurs satellite (boîtiers décodeurs). 1. Appuyez sur le bouton SOURCE de votre télécommande. 2. Sélectionnez la source d’entrée externe de votre choix. ✎Vous pouvez basculer entre les modes d’affichage Tous et Connecté en appuyant sur le bouton l ou r. ■ TV / Ext. / PC / HDMI1/DVI / HDMI2 / HDMI3 / AV / Component / USB ✎Les entrées connectées sont mises en surbrillance dans Source. ✎Les options Ext. et PC sont toujours activées. ✎Si les périphériques externes connectés ne sont pas mis en surbrillance, appuyez sur le bouton rouge. Le téléviseur lance une recherche de périphériques. Modif. Nom Dans Source, appuyez sur le bouton TOOLS. Vous pouvez ensuite définir le nom de la source externe que vous souhaitez. ■ Magnétoscope / DVD / Décodeur câble / Décodeur satellite / Décodeur PVR / Récepteur AV / Jeux / Caméscope / PC / DVI PC / Périph. DVI / TV / IPTV / Blu-ray / HD DVD / DMA : Nommez le périphérique connecté aux prises d’entrée pour faciliter la sélection de la source d’entrée. ✎Lorsque vous connectez un PC au port HDMI IN 1(DVI) avec un câble HDMI, vous devez définir le téléviseur en mode PC dans Modif. Nom. (PS51D490) ✎Lorsque vous connectez un PC au port HDMI IN 1(DVI) avec un câble HDMI/DVI, vous devez définir le téléviseur en mode DVI PC dans Modif. Nom. (PS51D490) ✎Lorsque vous connectez un périphérique AV au port HDMI IN 1(DVI) avec un câble HDMI/DVI, vous devez définir le téléviseur en mode Périph. DVI dans Modif. Nom. (PS43D490, PS51D490) Information Affiche des informations détaillées sur le périphérique externe sélectionné. Raccordement à une antenne Lorsque vous allumez le téléviseur pour la première fois, des réglages de base s’effectuent de manière automatique. ✎Préréglage : connexion du câble d’alimentation et de l’antenne. ✎L’appareil PDP peut créer des interférences avec la radio amateur ou la radio AM. ✎L’utilisation de radios portables ou mobiles, d’émetteurs-récepteurs, ainsi que de radios amateur ou AM près de votre téléviseur pourrait engendrer des dysfonctionnements de l’appareil. Câble Antenne VHF/UHF ou Entrée de l’alimentation [PD490-XN_ZF]BN68-03497E-02L04.indb 7 2011-03-07 오후 5:24:40Français - 8 Plug & Play (configuration initiale) Lorsque le téléviseur est allumé pour la première fois, plusieurs invites s’affichent pour vous aider à configurer les réglages de base. Appuyez sur le bouton POWERP. Plug & Play est disponible uniquement si Source est définie sur TV. ✎Avant de mettre le téléviseur sous tension, assurez-vous que l’antenne est branchée (p. 6). ✎Pour revenir à l’étape précédente, appuyez sur le bouton rouge. 1 Choix d’une langue Appuyez sur le bouton ▲ ou ▼, puis appuyez sur le bouton ENTERE. Sélectionnez la langue de votre choix pour l’affichage à l’écran. 2 Sélection du mode Enr. démo ou Util. domicile Appuyez sur le bouton ◄ ou ►, puis appuyez sur le bouton ENTERE. Sélectionnez le mode Util. domicile. Le mode Enr. démo est prévu pour un usage en magasin. Pour rétablir les paramètres du téléviseur de Enr. démo à Util. domicile (standard) : appuyez sur le bouton Volume du téléviseur. Lorsque l’affichage à l’écran du volume apparaît, appuyez pendant 5 secondes sur MENU. Enr. démo est disponible uniquement pour être exposé en magasin. Si vous sélectionnez cette option, plusieurs fonctions ne sont pas disponibles. Sélectionnez Util. domicile lorsque vous regardez le téléviseur à la maison. 3 Sélection d’un pays Appuyez sur le bouton ▲ ou ▼, puis appuyez sur le bouton ENTERE. Sélectionnez le pays de votre choix. (en fonction du pays) ✎Après la sélection du pays dans le menu Pays, certains modèles peuvent demander, en plus, le code PIN. Lors de l’entrée du code PIN, “0-0-0-0” n’est pas disponible. 4 Réglage du Mode Horloge Réglez le Mode Horloge automatiquement ou manuellement. Auto. : Sélectionnez votre fuseau horaire. Manuel : vous permet de définir manuellement la date et l’heure actuelles. 5 Sélection d’une antenne Appuyez sur le bouton ▲ ou ▼, puis appuyez sur le bouton ENTERE. Sélectionner les antennes à mettre en mémoire. 6 Sélection d’une chaîne Appuyez sur le bouton ▲ ou ▼, puis appuyez sur le bouton ENTERE. permet de sélectionner la source des chaînes à mémoriser. Lors du réglage de la source d’antenne sur Câble, une fenêtre s’affiche pour vous permettre d’attribuer des valeurs numériques (fréquences) aux chaînes. Pour plus d’informations, reportez-vous à Canal → Recherche automatique. 7 Profitez de votre téléviseur. Appuyez sur le bouton ENTERE. Si vous souhaitez réinitialiser cette fonction... Vous devez à nouveau sélectionner Plug & Play (MENU → Système) chez vous, bien que vous l’ayez fait en magasin. Sélectionnez Système - Plug & Play (Configuration initiale). Entrez votre code PIN à quatre chiffres. Le code PIN par défaut est “0-0-0-0” (excepte France) Si vous souhaitez modifier le code PIN, utilisez la fonction Modifier PIN. ✎Si vous avez oublié le code PIN, appuyez sur les boutons de la télécommande dans l’ordre suivant, ce qui remet le code PIN à “0-0-0-0” (France: “1-1-1-1”): MUTE → 8 → 2 → 4 → POWER (marche) P POWER [PD490-XN_ZF]BN68-03497E-02L04.indb 8 2011-03-07 오후 5:24:41Français - 9 Connexion à un périphérique AV ¦ Périphériques disponibles : DVD, Lecteur Blu-ray, décodeur câble HD, récepteur satellite HD (boîtier décodeur), Magnétoscope Utilisation d’un câble HDMI ou HDMI vers DVI (jusqu’à 1080p) ✎HDMI IN 1(DVI), 2, 3 / PC/DVI AUDIO IN x Lorsque vous utilisez une connexion avec câble HDMI/DVI, vous devez utiliser la borne HDMI IN 1(DVI) pour les vidéos. Un lecteur DVD ou Blu-ray, un décodeur câble HD, un récepteur satellite HD, un décodeur câble ou un récepteur satellite (décodeur) peuvent nécessiter un câble DVI-HDMI (DVI vers HDMI) ou un adaptateur DVI-HDMI (DVI vers HDMI). La prise PC/DVI AUDIO IN est indispensable pour les signaux audio. x Il se peut que l’affichage soit médiocre, voire inexistant, ou que le son soit de mauvaise qualité si un périphérique externe connecté au téléviseur utilise un mode HDMI d’une ancienne version. Dans ce cas, demandez au fabricant du périphérique externe de vous communiquer la version HDMI et, dans l’hypothèse où elle serait obsolète, demandez-lui une mise à niveau. x Veillez également à acheter un câble HDMI certifié. Dans le cas contraire, il se peut que l’écran n’affiche aucune image ou qu’une erreur de connexion se produise. USB HDMI IN HDMI OUT DVI OUT AUDIO OUT R-AUDIO-L W R Connexion HDMI Connexion HDMI à DVI [PD490-XN_ZF]BN68-03497E-02L04.indb 9 2011-03-07 오후 5:24:41Français - 10 Utilisation d’un câble Composant (jusqu’à 1080p) ou Audio/Vidéo (480i uniquement) et d’un câble Scart ✎En mode Ext., la sortie DTV prend uniquement en charge les signaux vidéo et audio MPEG SD. ✎Lors de la connexion à AV IN, la couleur de la prise AV IN [Y/VIDEO] (verte) ne correspond pas à celle du câble vidéo (jaune). ✎Pour obtenir une qualité d’image optimale, il est préférable d’opter pour la connexion Composante (plutôt que la connexion A/V). AUDIO OUT R-AUDIO-L VIDEO OUT AUDIO OUT R-AUDIO-L PR PB Y COMPONENT OUT EXT Connexion à composantes Connexion AV Connexion SCART [PD490-XN_ZF]BN68-03497E-02L04.indb 10 2011-03-07 오후 5:24:42Français - 11 Connexion entre un PC et un périphérique audio ¦ Périphériques disponibles : système audio numérique, amplificateur, système home cinéma DVD, PC Utilisation d’une connexion Optique (Numérique) ou d’une sortie casque ✎DIGITAL AUDIO OUT (OPTICAL) x Lorsqu’un système audio numérique est connecté à la prise DIGITAL AUDIO OUT (OPTICAL), diminuez le volume du téléviseur et du système. x Le mode audio 5.1 CH est disponible uniquement si le téléviseur est relié à un périphérique externe prenant en charge ce mode. x Lorsque le récepteur (home cinéma) est activé, vous pouvez écouter le son sortant de la prise optique du téléviseur. Lorsque le téléviseur reçoit un signal DTV, il envoie du son 5.1 canaux au récepteur du système home cinéma. Si la source est un composant numérique (par exemple, un lecteur DVD, un lecteur Blu-ray, un décodeur câble ou un récepteur satellite) connecté au téléviseur en HDMI, le récepteur home cinéma émet uniquement du son sur 2 canaux. Pour obtenir un son en mode 5.1, reliez la prise de sortie audio numérique du lecteur DVD, du lecteur Blu-ray, du décodeur câble ou du récepteur satellite (boîtier externe) directement à un amplificateur ou un système home cinéma. ✎Ecouteurs H : vous pouvez brancher vos écouteurs sur la prise casque du téléviseur. Lorsque le casque est branché, les enceintes intégrées n’émettent plus de son. x La fonction Son peut être limitée lorsque des écouteurs sont connectés au téléviseur. x Le volume des écouteurs et celui du téléviseur sont réglés séparément. OPTICAL Connexion Ensemble DVD Home Theater Connexion casque [PD490-XN_ZF]BN68-03497E-02L04.indb 11 2011-03-07 오후 5:24:42Français - 12 ¦ Utilisation d’un câble HDMI, d’un câble HDMI vers DVI ou d’un câble D-sub ✎En fonction du PC, la connexion à l’aide du câble HDMI peut ne pas être prise en charge. Modes d’affichage (Entrées D-Sub et HDMI vers DVI) • PS43D490 : 1024 X 768 @ 60Hz • PS51D490 : 1360 X 768 @ 60Hz Mode Résolution Fréquence horizontale (kHz) Fréquence verticale (kHz) Fréquence d’horloge pixels (MHz) Polarité de synchronisation (H/V) PS43D490 PS51D490 IBM 640 x 350 720 x 400 31,469 31,469 70,086 70,087 25,175 28,322 +/- -/+ c c c c MAC 640 x 480 832 x 624 35,000 49,726 66,667 74,551 30,240 57,284 -/- -/- c c c c VESA DMT 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1360 x 768 31,469 37,861 37,500 37,879 48,077 46,875 48,363 56,476 60,023 47,712 59,940 72,809 75,000 60,317 72,188 75,000 60,004 70,069 75,029 60,015 25,175 31,500 31,500 40,000 50,000 49,500 65,000 75,000 78,750 85,500 -/- -/- -/- +/+ +/+ +/+ -/- -/- +/+ +/+ c c c c c c c c c c c c c c c c c c c ✎REMARQUE x Dans le cas d’une connexion avec câble HDMI/DVI, vous devez utiliser la prise HDMI IN 1(DVI). x Le mode entrelacé n’est pas pris en charge. x Le téléviseur peut fonctionner de façon anormale si le format vidéo sélectionné n’est pas standard. x Les modes Separate et Composite sont pris en charge. Le mode SOG (Sync On Green) n’est pas pris en charge. PC OUT AUDIO OUT AUDIO OUT DVI OUT HDMI OUT Connexion PC [PD490-XN_ZF]BN68-03497E-02L04.indb 12 2011-03-07 오후 5:24:43Français - 13 Connexion à un port INTERFACE COMMUNE Utilisation de la “CARTE CI ou CI+” Pour regarder les chaînes payantes, la carte d’interface commune (CI(CI+) CARD) doit être insérée. • Si vous ne l’insérez pas, certaines chaînes afficheront le message “Signal brouillé”. • Les informations de pairage contenant un numéro de téléphone, l’ID de la carte d’interface commune (CI(CI+) CARD), l’ID de l’hôte et d’autres informations s’afficheront dans 2 ou 3 minutes. Si un message d’erreur s’affiche, contactez votre fournisseur d’accès. • Lorsque la configuration des informations sur les canaux est terminée, le message “Mise à jour terminée” s’affiche, indiquant que la liste des chaînes est mise à jour. ✎REMARQUE x Vous devez vous procurer une carte d’interface commune (CI(CI+) CARD) auprès d’un fournisseur local de diffusion par câble. x Lorsque vous sortez la carte d’interface commune (CI(CI+) CARD), tirez-la délicatement. Une chute pourrait en effet l’endommager. x Insérez la carte d’interface commune (CI(CI+) CARD) dans le sens indiqué sur celle-ci. x L’emplacement de la fente COMMON INTERFACE peut varier en fonction du modèle. x La carte d’interface commune (CI(CI+) CARD) n’est pas prise en charge dans certains pays et certaines régions ; vérifiez auprès de votre revendeur agréé. x Si vous rencontrez des problèmes, contactez le fournisseur d’accès. x Insérez la carte d’interface commune (CI ou CI+ CARD), qui prend en charge les paramètres actuels de l’antenne. L’image sera déformée, voire invisible. [PD490-XN_ZF]BN68-03497E-02L04.indb 13 2011-03-07 오후 5:24:44Français - 14 Consultation du manuel électronique (e-Manual) Affi chage Comment basculer entre le e-Manual et le(s) menu(s) correspondant(s) ✎Cette fonction n’est pas disponible dans certains menus. Méthode 1 Méthode 2 1. Appuyez sur le bouton rouge pour sélectionner Essayer, si vous souhaitez exécuter le(s) menu(s) correspondant(s). 2. Pour revenir à l’écran du manuel électronique, appuyez sur le bouton E-MANUAL. 1. Appuyez sur le bouton ENTERE lors de la sélection de la zone de contenu. Le message “Exécuter?” s’affi che. Sélectionnez Oui et appuyez ensuite sur le bouton ENTERE. La fenêtre des menus à l’écran s’affi che. 2. Pour revenir à l’écran du manuel électronique, appuyez sur le bouton E-MANUAL. Vous pouvez consulter la présentation et les instructions relatives aux fonctionnalités TV stockées sur le téléviseur. O MENUm→ Assistance → e-Manual → ENTERE ✎Pour revenir au manuel électronique, appuyez sur la touche E-MANUAL de la télécommande. ✎Vous ne pouvez pas utiliser la fonction Essayer si le menu n’est pas activé. Fonctions de base Changement du Mode Image prédéfi ni Réglages des paramètres de l’image Changement de la taille de l’image Modifi cation des options d’image Confi guration du téléviseur avec le PC } Index E Entrer e Quitter Ecran de télévision : affi che l’écran de la source d’entrée actuelle. Changer de catégorie. Appuyez sur le bouton l ou r pour sélectionner la catégorie de votre choix. Affi che la liste des sous-menus. Appuyez sur le bouton ENTERE pour sélectionner le sous-menu de votre choix. Boutons d’opération : }Bleu (Index) : affi che l'écran d'index. E Entrer : sélectionner une catégorie ou un sous-menu. e Quitter : permet de quitter le e-Manual. E-MANUAL Essayer E-MANUAL ‰ Changing the Preset Picture Mode ■ Sélectionnez le type d’image que vous préférez. Mode Image t • Dynamique : adapté à un environnement lumineux. • Standard : adapté à un environnement normal. • Naturel pour les téléviseurs LED / Relax pour les téléviseurs plasma : permet de réduire la fatigue oculaire. • Cinéma : adapté au visionnage de fi lms dans une pièce sombre. • Loisirs : adapté au visionnage de fi lms et de jeux vidéo. N Disponible uniquement en mode PC. ‰ Changement du Mode Image prédéfi ni O MENUm → Image → Mode Image → ENTERE ■ Mode Image Sélectionnez le type d’image que vous préférez. N Lorsqu’une source d’entrée est défi nie sur PC, seules les options Standard et Loisirs sont disponibles pour le Mode Image. • Dynamique : adapté à un environnement lumineux. • Standard : adapté à un environnement normal. • Cinéma : adapté au visionnage de fi lms dans une pièce sombre. • Loisirs : adapté au visionnage de fi lms et de jeux vidéo. Fonctions de base > Changement du Mode Image prédéfi ni (5/10) a Essayer b Accueil { Zoom } Index L Page e Quitter Image Mode Image : Standard r Lum. Cellules : 10 Contraste : 100 Luminosité : 45 Netteté : 50 Couleur : 50 Teinte (V/R) : V50/R50 Réglage de l’écran [PD490-XN_ZF]BN68-03497E-02L04.indb 14 2011-03-07 오후 5:24:50Français - 15 Affichage du contenu Utilisation du mode Zoom Lors de la consultation des instructions du manuel électronique, appuyez sur le bouton jaune pour agrandir l’écran. Pour parcourir l’écran agrandi, utilisez le bouton u ou d. ✎Pour revenir à l’écran précédent, appuyez sur le bouton RETURN. Recherche d’un mot-clé en utilisant la page d’index ✎Cette fonction n’est pas prise en charge dans toutes les langues. 1. Si vous souhaitez rechercher un mot-clé, appuyez sur le bouton bleu afin d’ouvrir l’écran Index. 2. Appuyez sur le bouton l ou r pour sélectionner l’ordre des caractères de votre choix et appuyez ensuite sur ENTERE. 3. Appuyez sur le bouton uor d pour sélectionner le mot-clé à afficher et appuyez ensuite sur ENTERE. 4. Vous accédez à l’écran d’instructions correspondant du manuel électronique. ✎Pour fermer l’écran Index, appuyez sur le bouton RETURN. a Essayer b Accueil { Zoom } Index L Page e Exit (Quitter) Fonctions de base > Changement du Mode Image prédéfini (5/10) Zone de contenu : si vous avez sélectionné un sous-menu, vous pouvez afficher le contenu correspondant. Pour accéder à la page précédente ou suivante, appuyez sur le bouton l ou r. Boutons d’opération : a Rouge (Essayer) : affiche le(s) menu(s) correspondant(s). b Vert (Accueil) : permet d'accéder à l'écran d'accueil du e-Manual. {Jaune (Zoom) : agrandit l'écran. }Bleu (Index) : affiche l'écran d'index. L (Page): permet de passer à la page précédente ou suivante. ‰ Changement du Mode Image prédéfini O MENUm → Image → Mode Image → ENTERE ■ Mode Image Sélectionnez le type d’image que vous préférez. N When an input source is set to PC, the Picture Mode is only available the Standard and Entertain. • Dynamique : adapté à un environnement lumineux. • Standard : adapté à un environnement normal. • Cinéma : adapté au visionnage de films dans une pièce sombre. • Loisirs : adapté au visionnage de films et de jeux vidéo. R Retour ‰ Changement du Mode Image prédéfini O MENUm → Image → Mode Image → ENTERE ■ Mode Image Sélectionnez le type d’image que vous préférez. N Lorsqu’une source d’entrée est définie sur PC, seules les options Standard et Loisirs sont disponibles pour le Mode Image. • Dynamique : adapté à un environnement lumineux. • Standard : adapté à un environnement normal. • Cinéma : adapté au visionnage de films dans une pièce sombre. • Loisirs : adapté au visionnage de films et de jeux vidéo. [PD490-XN_ZF]BN68-03497E-02L04.indb 15 2011-03-07 오후 5:24:51Français - 16 Installation du support mural Installation du kit de montage mural Le kit de montage mural (vendu séparément) permet de fixer le téléviseur au mur. Pour plus d’informations sur l’installation du support mural, reportez-vous aux instructions fournies avec le support mural. Faites appel à un technicien pour installer la fixation murale. Samsung Electronics ne saurait être tenu pour responsable d’un endommagement du produit ou d’une blessure si vous choisissez d’effectuer vous-même l’installation murale. Caractéristiques du kit de fixation murale (VESA) ✎Le kit de montage mural n’est pas fourni ; il est vendu séparément. Installez votre fixation murale sur un mur solide perpendiculaire au sol. Si vous souhaitez la fixer sur d’autres matériaux de construction, veuillez prendre contact avec votre revendeur le plus proche. Si vous l’installez au plafond ou sur un mur non droit, la fixation risque de tomber et de provoquer de graves blessures. ✎REMARQUE x Les dimensions standard pour tous les kits de fixation murale sont indiquées dans le tableau ci-dessous. x Un manuel d’installation détaillé et toutes les pièces nécessaires au montage sont fournis avec le kit de fixation mural. x N’utilisez pas de vis non conformes aux spécifications des vis VESA standard. x N’utilisez pas de vis plus longues que la dimension standard ou non conformes aux caractéristiques des vis VESA standard. Des vis trop longues pourraient endommager l’intérieur du téléviseur. x Pour les fixations murales non conformes aux caractéristiques des vis VESA standard, la longueur des vis peut varier, selon les caractéristiques de la fixation murale. x Ne serrez pas trop les vis : cela pourrait endommager le produit ou provoquer sa chute, entraînant des blessures corporelles. Samsung ne peut être tenue responsable de ce type d’accident. x Samsung ne peut être tenue responsable de tout dommage au produit ou toute blessure corporelle dans le cas de l’utilisation d’une fixation murale non-VESA ou non spécifiée, ou si l’utilisateur ne suit pas les instructions d’installation du produit. x N’inclinez pas le téléviseur de plus de 15 degrés. Famille de produits pouces Spéc. VESA (A * B) Vis standard Quantité TELEVISEUR ECRAN A PLASMA 43~51 400 X 400 M8 4 59~64 600 X 400 ✎Desserrez les vis avant d’installer le dispositif de fixation murale. N’installez pas votre kit de fixation murale lorsque le téléviseur est allumé. Vous risqueriez de vous électrocuter. [PD490-XN_ZF]BN68-03497E-02L04.indb 16 2011-03-07 오후 5:24:51Français - 17 Résolution des problèmes Si vous avez des questions sur le téléviseur, commencez par consulter la liste ci-dessous. Si aucune de ces solutions de dépannage ne s’applique à votre problème, rendez-vous sur le site “www.samsung.com”, puis cliquez sur Assistance ou contactez le centre d’appels dont les coordonnées figurent sur la dernière page de ce manuel. Problèmes Solutions et explications La télévision ne s’allume pas. • Vérifiez que le cordon d’alimentation secteur est branché correctement sur la prise murale et sur le téléviseur. • Vérifiez que la prise murale est opérationnelle. • Essayez d’appuyer sur le bouton POWER du téléviseur pour vous assurer que le problème n’est pas dû à la télécommande. Si le téléviseur s’allume, reportez-vous au problème “La télécommande ne fonctionne pas” ci-après. Aucune image/vidéo n’est affichée. • Vérifiez le raccordement des câbles (retirez tous les câbles connectés au téléviseur et aux appareils externes, puis rebranchez-les). • Réglez la sortie vidéo de votre périphérique externe (décodeur câble/satellite, DVD, Blu-ray, etc.) pour faire correspondre les connexions à l’entrée du téléviseur. Par exemple, si la sortie d’un périphérique externe est HDMI, vous devez établir une connexion avec une entrée HDMI du téléviseur. • Vérifiez que les appareils connectés sont sous tension. • Veillez à sélectionner la source appropriée du téléviseur en appuyant sur la touche SOURCE de la télécommande. La télécommande ne fonctionne pas. • Vérifiez que la polarité (+/–) des piles de la télécommande est respectée. • Nettoyez la lentille de la télécommande. • Essayez de diriger directement la télécommande vers le téléviseur à une distance de 1,5 à 1,8 m. La télécommande du décodeur câble/boîtier décodeur ne fonctionne pas. • Programmez la télécommande du décodeur câble/boîtier décodeur de telle sorte qu’elle puisse commander le téléviseur. Consultez le mode d’emploi du décodeur câble/boîtier décodeur pour obtenir le code du téléviseur SAMSUNG. ✎Certaines des images et des fonctions ci-dessus sont uniquement disponibles sur des modèles spécifiques. ✎Vous pouvez maintenir votre téléviseur dans des conditions optimales en le mettant à niveau avec le dernier micrologiciel (samsung.com → Support → Downloads) par le biais d’un périphérique USB. Licence Liste des fonctions Interface numérique et réseau excellents : Avec un syntoniseur numérique HD intégré, la vision des émissions HD sans inscription ne nécessite pas de décodeur câble/récepteur satellite (boîtier décodeur). 3D Cette incroyable nouvelle fonction vous permet de regarder du contenu 3D. Anynet+ (HDMI-CEC) Vous permet de contrôler tous les appareils Samsung connectés compatibles Anynet+ à l’aide de votre télécommande Samsung. Mon contenu Vous permet de lire les fichiers de musique, les images et les films enregistrés sur un périphérique USB. [PD490-XN_ZF]BN68-03497E-02L04.indb 17 2011-03-07 오후 5:24:52Français - 18 Fixation du téléviseur au mur Attention : si vous tirez ou poussez le téléviseur ou si vous grimpez dessus, il risque de tomber. Veillez notamment à ce que vos enfants ne se suspendent pas au téléviseur, ni ne le déséquilibrent, car cela pourrait le faire basculer et occasionner des blessures graves, voire entraîner la mort. Respectez toutes les précautions de sécurité indiquées dans la brochure relative à la sécurité. Pour une stabilité et une sécurité accrues, installez le dispositif antichute comme indiqué ci-après. Pour éviter toute chute du téléviseur : 1. Glissez les vis dans les colliers, puis fixez-les solidement au mur. Assurez-vous que les vis ont été fermement fixées au mur. ✎En fonction du type de mur, il est possible que vous ayez besoin de matériel supplémentaire, tel que des chevilles. ✎Les colliers, vis et chaînettes n’étant pas fournis, vous devez les acheter séparément. 2. Retirez les vis situées sur la partie centrale arrière du téléviseur, placez les vis dans les bagues, puis fixez-les à nouveau sur le téléviseur. ✎Il se peut que les vis ne soient pas fournies avec le produit. Dans ce cas, achetez des vis présentant les caractéristiques suivantes. 3. Reliez les colliers fixés au téléviseur et ceux fixés sur le mur à l’aide d’un câble solide, puis attachez-les fermement. ✎REMARQUE x Placez le téléviseur à proximité du mur afin qu’il ne bascule pas vers l’arrière. x Il est recommandé de placer la chaînette de façon à ce que les colliers fixés au mur soient placés à la même hauteur ou plus bas que ceux fixés au téléviseur. x Détachez la chaînette avant de déplacer le téléviseur. 4. Vérifiez que toutes les connexions sont fixées correctement. Vérifiez régulièrement que les connexions ne présentent aucun signe d’usure. Si vous avez un doute quant à la sécurité des connexions, contactez un installateur professionnel. Stockage et entretien ✎Si des autocollants sont appliqués sur l’écran du téléviseur, leur retrait peut laisser quelques traces. Nettoyez-les avant d’utiliser le téléviseur. Ne vaporisez pas d’eau ni d’agent nettoyant directement sur le produit. Tout liquide qui entre dans le produit peut engendrer une défaillance, un incendie ou une électrocution. Nettoyez le produit à l’aide d’un chiffon doux imprégné d’une petite quantité d’eau. Mur [PD490-XN_ZF]BN68-03497E-02L04.indb 18 2011-03-07 오후 5:24:53Français - 19 Caractéristiques techniques Considérations environnementales Température de fonctionnement Humidité en cours de fonctionnement Température de stockage Humidité sur le lieu de stockage De 10°C à 40°C (50°F à 104°F) 10% à 80%, sans condensation De -20°C à 45°C (-4°F à 113°F) 5% à 95%, sans condensation Système TV Analogique : B/G, D/K, L, I (en fonction de votre pays) Numérique : DVB-T/DVB-C Système de couleur/vidéo Analogique : PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60 Numérique : MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0 Système Sonore BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC. HDMI IN Vidéo : 1080 24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i Audio : 2Ch Linear PCM 32/44.1/48 kHz, 16/20/24 bits. Socle orientable (gauche/droite) -20˚ ~ 20˚ Nom du modèle PS43D490 PS51D490 Taille de l’écran 43 pouces (109 cm) 51 pouces (128 cm) Son (Sortie) 10 W X 2 Dimensions (L x P x H) Corps Avec socle 1011,8 X 56,0 X 622,4 mm 1011,8 X 305,0 X 698,7 mm 1187,8 X 56,0 X 706,6 mm 1187,8 X 305,0 X 782,9 mm Poids Sans socle Avec socle 16,0 kg 20,3 kg 22,5 kg 26,8 kg Résolution de l’affichage 1024 X 768 1360 X 768 ✎La conception et les spécifications peuvent être modifiées sans préavis. ✎Pour plus d’informations sur les caractéristiques d’alimentation et de consommation électrique, reportez-vous à l’étiquette fixée au produit. ✎Par la présente Samsung déclare que l’appareil PDP TV est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. [PD490-XN_ZF]BN68-03497E-02L04.indb 19 2011-03-07 오후 5:24:53Déclaration de conformité Produit : PDP TV Modèles : PS43D490, PS51D490 Apposition du marquage CE : 2011 Ce produit a été fabriqué dans l’une des usines suivantes : U1: Samsung Electronics Co., Ltd 416, Maetan 3-Dong, Yeongtong-Gu, Suwon-Si, Gyeonggi-Do, 443-742, Corée U2: Samsung Electronics Slovaquie s.r.o Hviezdoslavova 807 924 27 Galanta, République slovaque U3: Samsung Electronics Co. hongrois H-5126 Jaszfenyszaru (Nom et adresse des usines) Par la présente Samsung Electronics déclare que les PDP TV, PS43D490, PS51D490 sont conformes aux exigences essentielles de la Directive 1999/5/CE du Parlement Européen et du Conseil du 9 mars 1999 concernant les équipements hertziens et les équipements terminaux de télécommunications et la reconnaissance mutuelle de leur conformité, ainsi qu’à la Directive Basse Tension (2006/95/CE) et la Directive Compatibilité Electromagnétique (2004/108/CE) par application des EN 60065: 2002+A1:2006+A11:2008 EN55022:2006+A1:2007 EN 61000-3-2:2006 EN 300 328-1 v1.7.1 EN 301 489-17 v1.3.2 :2008 EN61000-3-3:1995+A1:2001+A2:2005 EN55024:1998+A1:2001+A2:2003 EN55013:2001+A1:2003+A2 :2006 EN55020:2007 EN 301 489-1 v1.8.1 :2008 et la Directive Eco-conception (2009/125/CE) mise en œuvre par le Règlement (CE) n° 642/2009 pour les téléviseurs. La documentation technique est conservée à l’adresse du fabricant figurant ci-dessous. Fabricant: Samsung Electronics Co., Ltd. 416 Maetan-dong, Young-Tong gu, Suwon, Korea 442-742 26 Janv 2011 (Lieu et date de signature) Chang Seub Eum / Manager (Nom et signature de la personne autorisée) Représentant en UE : Samsung Electronics Euro QA Lab. Blackbushe Business Park Saxony Way, Yateley, Hampshire GU46 6GG, UK 28 Janv 2011 (Lieu et date de signature) Joong Hoon Choi / Responsable du Laboratoire (Nom et signature de la personne autorisée) Note : L’adresse ci-dessus ne correspond pas à l’adresse du Centre de Service Samsung. Pour obtenir l’adresse ou le numéro de téléphone du Centre de Service Samsung dont vous dépendez, veuillez vous reporter à la carte de garantie du produit ou contacter votre revendeur. Cet équipement peut être utilisé dans tous les pays de l’Union Européenne. Restriction : En France, cet équipement ne doit être utilisé qu’à l’intérieur des bâtiments. ELECTRONICS [PD490-XN_ZF]BN68-03497E-02L04.indb 20 2011-03-07 오후 5:24:53This page is intentionally left blank. [PD490-XN_ZF]BN68-03497E-02L04.indb 21 2011-03-07 오후 5:24:53Deutsch - 2 Weitere Informationen zur Verwendung des e-Manuals (Seite 14) Die Abbildungen und Illustrationen in diesem Handbuch dienen nur zur Information und können vom tatsächlichen Aussehen des Geräts abweichen. Änderungen an Ausführung und technischen Daten vorbehalten. Hinweis zu Digitalfernsehen 1. Die Funktionalitäten für Digital TV (DVB) stehen nur in Ländern/Regionen zur Verfügung, in denen digitale terrestrische DVB-T-Signale (MPEG2 und MPEG4 AVC) gesendet werden oder in denen Sie Zugang zu einem kompatiblen Kabelfernsehdienst mit DVB-C (MPEG2 und MPEG4 AAC) haben. Fragen Sie Ihren örtlichen Händler, wenn Sie Informationen über die Verfügbarkeit von DVB-T oder DVB-C in Ihrer Gegend benötigen. 2. DVB-T ist der Standard des europäischen DVB-Konsortiums für die terrestrische Versorgung mit digitalem Fernsehen, und DVB-C ist der Standard des Konsortiums für die Versorgung mit digitalem Kabelfernsehen. Allerdings werden manche Unterscheidungsmerkmale wie EPG (elektrische Programmzeitschrift), VOD (Video on Demand) usw. in dieser Spezifikation nicht berücksichtigt. Deshalb können sie zum jetzigen Zeitpunkt noch nicht eingesetzt werden. 3. Zwar hält dieses Fernsehgerät die aktuellen Standards der DVB-T- und DVB-C-Spezifikationen [Version August 2008] ein, aber es kann nicht garantiert werden, dass die Kompatibilität mit zukünftigen digitalen terrestrischen DVB-T und DBV-C-Signalen gewahrt bleibt. 4. In Abhängigkeit von den Ländern/Regionen, in denen dieses Fernsehgerät eingesetzt wird, verlangen manche Kabelfernsehanbieter zusätzliche Gebühren für solch einen Dienst, und möglicherweise wird verlangt, dass Sie den Vertragsbedingungen des Unternehmens zustimmen. 5. Manche Digitalfernsehfunktionen sind in einigen Ländern oder Regionen möglicherweise nicht verfügbar, und DVB-C-Signale kann das Gerät bei manchen Kabelfernsehanbietern möglicherweise nicht fehlerfrei verarbeiten. 6. Für weitere Informationen setzen Sie sich bitte mit dem Samsung-Kundendienstzentrum in Verbindung. ✎ Die Empfangsqualität des Fernsehgeräts kann durch Unterschiede bei den Sendeverfahren in verschiedenen Ländern beeinträchtigt werden. Kontrollieren Sie die Leistung des Fernsehgeräts bei Ihrem örtlichen SAMSUNG-Händler oder wenden Sie sich an das Samsung-Callcenter um festzustellen, ob sich die Empfangsqualität durch Ändern der Fernseheinstellungen verbessern lässt. Benutzerhinweise • Einbrennen von Standbildern Lassen Sie Standbilder (z. B. von einem Videospiel) auf dem Plasmamonitor höchstens einige Minuten lang anzeigen, da das Bild anderenfalls einbrennen kann. Das Einbrennen von Standbildern wird auch als „Bildkonservierung“ bezeichnet. Sie können das Einbrennen vermeiden, indem Sie die Helligkeit und den Kontrast des Bildschirms beim Anzeigen von Standbildern verringern. • Wärmeentwicklung auf der Oberseite des Plasmabildschirms Die Oberseite des Produkts kann nach längerem Betrieb warm werden, da die Wärme aus dem Monitor über die Entlüftungsöffnung im oberen Teil des Geräts abgeführt wird. Dies ist normal und weist nicht auf einen Defekt oder eine Fehlfunktion des Geräts hin. Allerdings sollten Kinder von dem oberen Teil des Geräts ferngehalten werden. • Das Gerät verursacht ein „knackendes“ Geräusch. Ein „knackendes“ Geräusch entsteht, wenn das Gerätematerial sich aufgrund einer Änderung der Umgebung, wie z. B. Temperaturschwankungen oder Änderung der Luftfeuchtigkeit, zusammenzieht oder ausdehnt. Das ist normal und stellt keinen Defekt des Geräts dar. • Pixelfehler Der Plasmabildschirm, für dessen Herstellung hoch entwickelte Technologie eingesetzt wird, besitzt eine Bildfläche mit 2.360.000 (bei HD-Auflösung) bis 6.221.000 (bei Full-HD-Auflösung) Pixeln. Allerdings können ein paar zu helle oder zu dunkle Pixel auf der Bildfläche zu sehen sein. Diese Pixelfehler haben keinen Einfluss auf die Geräteleistung. • Vermeiden Sie den Betrieb des Plasmabildschirms bei Temperaturen unter 5°C. • Ein Standbild, dass zu lange angezeigt wird, kann zu einer bleibenden Beschädigung des Plasmabildschirms führen. Der Betrieb des Plasmafernsehers im Format 4:3 für einen längeren Zeitraum kann links, rechts und in der Mitte des Monitors Spuren der Bildränder hinterlassen, die durch die unterschiedliche Lichtemission auf dem Monitor verursacht werden. Durch die Wiedergabe einer DVD oder den Betrieb einer Spielkonsole kann es auf dem Bildschirm zu ähnlichen Effekten kommen. Schäden, die durch die o. g. Effekte verursacht wurden, fallen nicht unter die Garantie. • Nachbilder auf dem Bildschirm. Durch das Anzeigen der Standbilder von Videospielen oder vom PC über einen gewissen Zeitraum hinaus können partielle Nachbilder entstehen. Um diesen Effekt zu verhindern, verringern Sie Helligkeit und Kontrast, wenn Sie Standbilder für einen längeren Zeitraum anzeigen möchten. • Garantie Durch diese Garantie nicht abgedeckt sind Schäden, die durch das Einbrennen von Bildern entstehen. Das Einbrennen von Bildern wird von der Garantie nicht abgedeckt. Korrekte Entsorgung von Altgeräten (Elektroschrott) (In den Ländern der Europäischen Union und anderen europäischen Ländern mit einem separaten Sammelsystem) Die Kennzeichnung auf dem Produkt, Zubehörteilen bzw. auf der dazugehörigen Dokumentation gibt an, dass das Produkt und Zubehörteile (z. B. Ladegerät, Kopfhörer, USB-Kabel) nach ihrer Lebensdauer nicht zusammen mit dem normalen Haushaltsmüll entsorgt werden dürfen. Entsorgen Sie dieses Gerät und Zubehörteile bitte getrennt von anderen Abfällen, um der Umwelt bzw. der menschlichen Gesundheit nicht durch unkontrollierte Müllbeseitigung zu schaden. Helfen Sie mit, das Altgerät und Zubehörteile fachgerecht zu entsorgen, um die nachhaltige Wiederverwertung von stofflichen Ressourcen zu fördern. Private Nutzer wenden sich an den Händler, bei dem das Produkt gekauft wurde, oder kontaktieren die zuständigen Behörden, um in Erfahrung zu bringen, wo Sie das Altgerät bzw. Zubehörteile für eine umweltfreundliche Entsorgung abgeben können. Gewerbliche Nutzer wenden sich an ihren Lieferanten und gehen nach den Bedingungen des Verkaufsvertrags vor. Dieses Produkt und elektronische Zubehörteile dürfen nicht zusammen mit anderem Gewerbemüll entsorgt werden. Korrekte Entsorgung der Batterien dieses Produkts (In den Ländern der Europäischen Union und anderen europäischen Ländern mit einem separaten Altbatterie-Rücknahmesystem) Die Kennzeichnung auf der Batterie bzw. auf der dazugehörigen Dokumentation oder Verpackung gibt an, dass die Batterie zu diesem Produkt nach seiner Lebensdauer nicht zusammen mit dem normalen Haushaltsmüll entsorgt werden darf. Wenn die Batterie mit den chemischen Symbolen Hg, Cd oder Pb gekennzeichnet ist, liegt der Quecksilber-, Cadmium- oder Blei-Gehalt der Batterie über den in der EG-Richtlinie 2006/66 festgelegten Referenzwerten. Wenn Batterien nicht ordnungsgemäß entsorgt werden, können sie der menschlichen Gesundheit bzw. der Umwelt schaden. Bitte helfen Sie, die natürlichen Ressourcen zu schützen und die nachhaltige Wiederverwertung von stofflichen Ressourcen zu fördern, indem Sie die Batterien von anderen Abfällen getrennt über Ihr örtliches kostenloses Altbatterie- Rücknahmesystem entsorgen. [PD490-XN_ZF]BN68-03497E-02L04.indb 2 2011-03-07 오후 5:24:54Deutsch - 3 Zubehör ✎Vergewissern Sie sich, dass im Lieferumfang des Fernsehgeräts folgende Komponenten enthalten sind. Falls irgendwelche Teile fehlen sollten, setzen Sie sich bitte mit Ihrem Händler in Verbindung. ✎Farbe und Form der Teile können sich je nach Modell unterscheiden. ✎Kabel, die nicht zum Paketinhalt gehören, können gesondert erworben werden. ✎Achten Sie darauf, dass Sie beim Auspacken keine Zubehörteile übersehen, die durch Verpackungsmaterialien verdeckt werden. [VORSICHT: STELLEN SIE DIE VERBINDUNG DAUERHAFT HER, DAMIT DAS NETZTEIL NICHT VOM GERÄT GETRENNT WERDEN KANN • Fernbedienung und 2 Batterien (Typ AAA) • Netzkabel • Bedienungsanleitung • Reinigungstuch • Garantiekarte (nicht überall verfügbar) / Sicherheitshinweise Nur 43-Zoll-Modell Ferritkern (2 Stk.) ✎Ferritkern für Netzkabel: Mit dem Ferritkern werden die Kabel vor Störungen geschützt. Wenn Sie ein Kabel anschließen, öffnen Sie den Ferritkern und legen Sie ihn in der Nähe des Steckers mit einem deutlich hörbaren Klicken um das Kabel (siehe Abbildung). x A Mindestabstand zwischen dem Ferritkern und dem anderen Ende des Kabels, das in das Fernsehgerät eingesteckt wird: 6~8 Zoll (15~20 cm) x B Maximaler Abstand zwischen dem Ferritkern und dem anderen Ende des Kabels, das in die Steckdose eingesteckt wird: 3/4 Zoll (2 cm) Netzkabel A B [PD490-XN_ZF]BN68-03497E-02L04.indb 3 2011-03-07 오후 5:24:54Deutsch - 4 Nur 51-Zoll-Modell Ferritkern (2 Stk.) Ferritkern (1 Stk.) ✎Ferritkern für Netzkabel: Mit dem Ferritkern werden die Kabel vor Störungen geschützt. Wenn Sie ein Kabel anschließen, öffnen Sie den Ferritkern und legen Sie ihn in der Nähe des Steckers mit einem deutlich hörbaren Klicken um das Kabel (siehe Abbildung). x A Mindestabstand zwischen dem Ferritkern und dem anderen Ende des Kabels, das in das Fernsehgerät eingesteckt wird: 6~8 Zoll x B Maximaler Abstand zwischen dem Ferritkern und dem anderen Ende des Kabels, das in die Steckdose eingesteckt wird: 3/4 Zoll Netzkabel ✎Ferritkern: Mit dem Ferritkern werden die Kabel vor Störungen geschützt. Wenn Sie ein Kabel anschließen, öffnen Sie den Ferritkern und legen Sie ihn in der Nähe des Steckers mit einem deutlich hörbaren Klicken um das Kabel (siehe Abbildung). Antennenkabel / Komponentenkabel (gesondert lieferbar) • Verwaltungskosten werden abgerechnet, wenn: – (a) auf Ihren Wunsch ein Ingenieur zu Ihnen geschickt wird, und es liegt kein Defekt des Geräts vor (d.h. wenn Sie dieses Benutzerhandbuch nicht gelesen haben) – (b) Sie das Gerät in eine Reparaturwerkstatt bringen, und es liegt kein Defekt des Geräts vor (d.h. wenn Sie dieses Benutzerhandbuch nicht gelesen haben) • Der abgerechnete Betrag wird Ihnen mitgeteilt, ehe irgendwelche Arbeiten oder Kundenbesuche ausgeführt werden. A B [PD490-XN_ZF]BN68-03497E-02L04.indb 4 2011-03-07 오후 5:24:55Deutsch - 5 Bedienfeld ✎Form und Farbe des Geräts können sich je nach Modell unterscheiden. Fernbedienungssensor Richten Sie die Fernbedienung auf diesen Sensor am Fernsehgerät. Netzanzeige Beim Einschalten des Fernsehgeräts blinkt die Netzleuchte kurz und erlischt anschließend. Im Standby-Modus leuchtet die Anzeige permanent. SOURCEE Umschalten zwischen allen verfügbaren Signalquellen. Im Bildschirmmenü können Sie diese Taste wie die Eingabetaste ENTERE auf der Fernbedienung verwenden. MENU y Hiermit zeigen Sie die Funktionen des Fernsehgeräts in einem Bildschirmmenü an. yEinstellen der Lautstärke. Im Bildschirmmenü können Sie die z -Schaltflächen wie die Tasten ◄ und ► auf der Fernbedienung verwenden. zWechseln des Senders. Im Bildschirmmenü können Sie die -Schaltflächen wie die Tasten ▼ und ▲ auf der Fernbedienung verwenden. P (Netz) Ein- oder Ausschalten des Fernsehgeräts. Standby-Modus Der Standby-Modus ist nicht für längere Phasen der Abwesenheit gedacht (z. B. wenn Sie verreist sind). Eine kleine Menge Strom wird auch dann noch verbraucht, wenn das Gerät mit dem Netzschalter ausgeschaltet wurde. Es ist am besten, das Netzkabel aus der Steckdose zu ziehen. Absichern des Aufstellbereichs Halten Sie die erforderlichen Abstände zwischen dem Gerät und anderen Objekten (z.B. Wänden) ein, um ausreichende Lüftung sicherzustellen. Wenn Sie dies nicht tun, besteht die Gefahr, dass aufgrund eines Anstiegs der Temperatur im Innern des Geräts ein Brand ausbricht oder andere Probleme mit dem Gerät auftreten. ✎Wenn Sie einen Standfuß oder eine Wandhalterung einsetzen, verwenden Sie ausschließlich Teile von Samsung Electronics. x Wenn Sie Teile eines anderen Herstellers verwenden, kann es zu Problemen mit dem Gerät oder zu Verletzungen kommen, weil das Gerät herunterfällt. ✎Das Aussehen kann sich je nach Gerät unterscheiden. ✎Gehen Sie beim Anschließen des Fernsehgeräts vorsichtig vor, da einige Teile warm werden können. Aufstellen des Geräts mit dem Standfuß Installation des Geräts mit der Wandhalterung 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm Systemsteuerung [PD490-XN_ZF]BN68-03497E-02L04.indb 5 2011-03-07 오후 5:24:55Deutsch - 6 Fernbedienung ✎Dies ist eine spezielle Fernbedienung für Personen mit beeinträchtigtem Sehvermögen. Die Tasten zum Einstellen des Senders und die Zifferntasten sind in Braille beschriftet. Einlegen von Batterien (Batteriegröße: AAA) Ein- und Ausschalten des Fernsehgeräts. Anzeigen und Auswählen der verfügbaren Videosignalquellen. Zurück zum vorherigen Kanal. Drücken Sie diese Taste, um den Ton vorübergehend auszuschalten. Wechseln des Kanals. Anzeigen der Senderlisten auf dem Bildschirm. Anzeigen des elektronischen Programmführers. Anzeigen von Informationen auf dem Bildschirm u/d/l/r : Bewegen Sie den Cursor über ein Element des Bildschirmmenüs. ENTERE: Auswählen des Menüs und Ändern der entsprechenden Elementwerte. Schließen des Menüs. Direkter Zugriff auf die Kanäle. Einstellen der Lautstärke. Alternativ wählen Sie “Videotext ein”, “Doppel”, “Mix” oder “Aus” Das Bildschirmmenü wird geöffnet. Hiermit können Sie häufig verwendete Funktionen schnell auswählen. Anzeigen der Startseite mit dem Inhalt, auf der die Optionen Fernsehen, Eigene Inhalte und Quelle angeboten werden. Zurück zum vorherigen Menü. Verwenden Sie diese Tasten bei der Arbeit im Menü Kanal-Manager, Eigene Inhalte usw. Verwenden Sie diese Tasten im Modus Eigene Inhalte und Anynet+. P.MODE: Drücken Sie diese Taste zum Auswählen des Bildmodus. W: Einstellen des Videos, das mit dem 3D-Signal zur Verfügung gestellt wird. DUAL f-g: Auswahl von Toneffekten E-MANUAL: Anzeigen des e-Manuals. P.SIZE: Auwählen des Bildformats. AD/SUBT.: Aktivieren/Deaktivieren des Audiokommentars für Sehgeschädigte (in manchen Gegenden nicht verfügbar). / Anzeigen digitaler Untertitel. [PD490-XN_ZF]BN68-03497E-02L04.indb 6 2011-03-07 오후 5:24:56Deutsch - 7 Ändern der Signalquelle Quelle Hiermit wählen Sie, ob das Fernsehgerät mit einem Fernsehsignal versorgt wird oder an externe Signaleingänge wie z. B. DVD- / BluRay-Player / Kabelreceiver / Satellitenreceiver (Set-Top Box) angeschlossen ist. 1. Drücken Sie die Taste SOURCE auf Ihrer Fernbedienung. 2. Wählen Sie die gewünschte externe Eingangsquelle. ✎Sie können durch Drücken der Taste l oder r für den Anzeigemodus zwischen Alle und Verbunden wählen. ■ TV / Ext. / PC / HDMI1/DVI / HDMI2 / HDMI3 / AV / Component / USB ✎Im Fenster Quelle werden die angeschlossenen Signalquellen hervorgehoben. ✎Ext. und PC bleiben immer aktiviert. ✎Wenn die angeschlossenen externen Geräte nicht hervorgehoben werden, drücken Sie den roten Knopf. Das Fernsehgerät sucht nach angeschlossenen Geräten. Name bearb. Drücken Sie im Fenster Quelle die Taste TOOLS, um die gewünschten externen Eingangsquellen einzustellen. ■ VCR / DVD / Kabel-STB / Sat-STB / PVR-STB / AV-Receiver / Spiel / Camcorder / PC / DVI PC / DVI-Geräte / TV / IPTV / Blu-ray / HD DVD / DMA: Vergeben Sie Namen für die an die Eingangsbuchsen angeschlossenen Geräte, um die Auswahl der Signalquelle zu vereinfachen. ✎Wenn Sie einen PC über ein HDMI-Kabel mit dem HDMI IN 1(DVI)-Anschluss verbinden, müssen Sie unter Name bearb. den PC-Modus des Fernsehgeräts aktivieren. (PS51D490) ✎Wenn Sie einen PC über ein HDMI/DVI-Kabel mit dem HDMI IN 1(DVI)-Anschluss verbinden, müssen Sie unter Name bearb. den PC-Modus des Fernsehgeräts aktivieren. (PS51D490) ✎Wenn Sie einen PC über ein HDMI/DVI-Kabel mit dem HDMI IN 1(DVI)-Anschluss verbinden, müssen Sie unter Name bearb. den DVI-Geräte-Modus des Fernsehgeräts aktivieren. (PS43D490, PS51D490) Information Sie können Detailinformationen zum ausgewählten externen Gerät anzeigen. Anschließen an eine Antenne Wenn das Fernsehgerät zum ersten Mal eingeschaltet wird, werden automatisch die Grundeinstellungen vorgenommen. ✎Voreinstellung: Anschließen ans Stromnetz und an die Fernsehantenne. ✎Das Plasmagerät kann Störungen im Amateurfunk- oder Mittelwellenband verursachen. ✎Wenn Sie ein Mobiltelefon mit Zweiwegradio oder Mobilgeräte, die das Amateurfunk- und Mittelwellenband nutzen, in der Nähe des Fernsehgeräts verwenden, kann dies zu Störungen am Fernseher führen. Kabel VHF/UHF-Antenne oder Netzanschluss [PD490-XN_ZF]BN68-03497E-02L04.indb 7 2011-03-07 오후 5:24:57Deutsch - 8 Plug & Play (Anfangseinstellung) Wenn das Fernsehgerät erstmals eingeschaltet wird, helfen eine Reihe aufeinanderfolgender Abfragen beim Durchführen der Grundeinstellungen. Drücken Sie die Taste POWERP. Plug & Play ist nur verfügbar, wenn die Quelle auf TV eingestellt ist. ✎Stellen Sie vor dem Einschalten des Fernsehgeräts sicher, dass das Antennenkabel angeschlossen ist (S. 6). ✎Um zum vorherigen Schritt zurückzukehren, drücken Sie die rote Taste. 1 Auswählen der Sprache Drücken Sie die Taste ▲ oder ▼, und drücken Sie dann die Eingabetaste ENTERE. Wählen Sie die gewünschte Sprache des Bildschirmmenüs (OSD) aus. 2 Auswählen von Shop-Demo oder Privatgebrauch Drücken Sie die Taste ◄ oder ►, und drücken Sie dann die Eingabetaste ENTERE. Wählen Sie den Modus Privatgebrauch aus. Der Modus Shop-Demo ist für den Betrieb in Einzelhandelsgeschäften bestimmt. Zurücksetzen der Geräteeinstellungen von Shop-Demo auf Privatgebrauch (Standard): Drücken Sie die Lautstärketaste am Fernsehgerät. Wenn das Menü „Lautstärke“ angezeigt wird, halten Sie die Taste MENU 5 Sekunden lang gedrückt. Shop-Demo ist ausschließlich für den Betrieb in Geschäften bestimmt. Wenn Sie diese Option dennoch auswählen, stehen einige Funktionen nicht zur Verfügung. Wählen Sie Privatgebrauch, wenn Sie zuhause fernsehen möchten. 3 Auswählen eines Landes Drücken Sie die Taste ▲ oder ▼, und drücken Sie dann die Eingabetaste ENTERE. Wählen Sie das gewünschte Land aus. (je nach Land) ✎Nachdem Sie das Land im Menü Land eingestellt haben, werden Sie bei manchen Modellen aufgefordert, die PIN-Nummer einzurichten. ✎Die Ziffernkombination „0-0-0-0“ dürfen Sie als PIN-Nummer nicht eingeben. 4 Einstellen des Uhrmodus Stellen Sie den Uhrmodus automatisch oder manuell ein. Auto: Wählen Sie Ihre Zeitzone. Manuell: Hiermit können Sie das Datum und die Uhrzeit manuell einstellen. 5 Auswählen einer Antenne Drücken Sie die Taste ▲ oder ▼, und drücken Sie dann die Eingabetaste ENTERE. Sendertyp zum Speichern auswählen. 6 Auswählen eines Senders. Drücken Sie die Taste ▲ oder ▼, und drücken Sie dann die Eingabetaste ENTERE. Wählen Sie den Sendertyp für den Suchlauf aus. Wenn Sie den Antennentyp auf Kabel einstellen, können Sie den Sendern im nächsten Schritt einen Zahlenwert (Senderfrequenzen) zuweisen. Weitere Informationen hierzu finden Sie unter Sender → Autom. Sendersuchlauf. 7 Gute Fernsehunterhaltung! Drücken Sie die Taste ENTERE. So setzen Sie diese Funktion zurück: Sie sollten das Plug & Play-Verfahren (MENU → System) zuhause erneut durchführen, selbst wenn Sie es bereits im Geschäft durchgeführt haben. Wählen Sie System - Plug & Play (Anfangseinstellung). Geben Sie Ihre vierstellige PIN ein. Die Standard-PIN lautet „0-0-0-0“ (außer Frankreich). Wenn Sie die PIN ändern möchten, verwenden Sie die Funktion PIN ändern. ✎Wenn Sie den PIN-Code vergessen haben, drücken Sie die Tasten auf der Fernbedienung im Standby-Modus in der angegebenen Reihenfolge, um die PIN auf „0-0-0-0“ zurückzusetzen: MUTE → 8 → 2 → 4 → POWER (ein). P POWER [PD490-XN_ZF]BN68-03497E-02L04.indb 8 2011-03-07 오후 5:24:57Deutsch - 9 Anschließen an ein AV-Gerät ¦ Verfügbare Geräte: DVD, Blu-ray-Player, HD-Kabelreceiver, HD-Satellitenreceiver, Videorekorder Mit Hilfe eines HDMI- oder HDMI/DVI-Kabels (bis zu 1080p) ✎HDMI IN 1(DVI), 2, 3 / PC/DVI AUDIO IN x Eine Verbindung über HDMI/DVI-Kabel kann nur über den Videoanschluss HDMI IN 1(DVI) erfolgen. DVDPlayer, Blu-ray-Player, HD-Kabelreceiver, HD-Satellitenreceiver, Kabelreceiver oder Satellitenreceiver erfordern möglicherweise ein DVI/HDMI-Kabel (DVI-zu-HDMI) oder einen DVI/HDMI-Adapter (DVI-zu-HDMI). Die PC/DVI AUDIO IN-Buchse wird für den Audioanschluss benötigt. x Das Bild wird möglicherweise nicht normal (wenn überhaupt) angezeigt oder es erfolgt keine Tonausgabe, wenn ein externes Gerät an den Fernseher angeschlossen wird, das eine ältere HDMI-Version verwendet. Wenn solch ein Problem auftritt, erfragen Sie die HDMI-Version beim Hersteller des externen Geräts und bitten Sie, wenn veraltet, um ein Upgrade. x Achten Sie darauf, nur ein zertifiziertes HDMI-Kabel zu kaufen. Andernfalls kann es passieren, dass kein Bild angezeigt wird oder ein Verbindungsfehler auftritt. USB HDMI IN HDMI OUT DVI OUT AUDIO OUT R-AUDIO-L W R HDMI-Anschluss HDMI/DVI-Anschluss [PD490-XN_ZF]BN68-03497E-02L04.indb 9 2011-03-07 오후 5:24:58Deutsch - 10 Mit Hilfe eines Komponentenkabels (bis 1080p) oder eines Audio/Video-Kabels (nur 480i) und eines Scartkabels ✎Im Modus Ext. unterstützt DTV Out nur MPEG SD-Video und -Audio. ✎Bei Anschluss an AV IN stimmt die Farbe des Anschlusses AV IN [Y/VIDEO] (grün) nicht mit der des Videokabels (gelb) überein. ✎Um die beste Bildqualität zu erhalten, wird eine Komponentenverbindung über den A/V-Anschluss empfohlen. AUDIO OUT R-AUDIO-L VIDEO OUT AUDIO OUT R-AUDIO-L PR PB Y COMPONENT OUT EXT Komponentenanschluss AV-Anschluss SCART-Anschluss [PD490-XN_ZF]BN68-03497E-02L04.indb 10 2011-03-07 오후 5:24:58Deutsch - 11 Anschließen an einen PC und ein Audiogerät ¦ Verfügbare Geräte: Digital-Audiosystem, Verstärker, DVD-Heimkino, PC Mit Hilfe des optischen Anschlusses (digital) oder des Anschlusses für die Kopfhörer ✎DIGITAL AUDIO OUT (OPTICAL) x Wenn ein Digital-Audiosystem mit dem DIGITAL AUDIO OUT (OPTICAL)-Anschluss verbunden ist, reduzieren Sie die Lautstärke von Fernsehgerät und System. x 5.1-Kanalton ist möglich, wenn das Fernsehgerät an ein externes Gerät angeschlossen ist, das 5.1-Kanalton unterstützt. x Wenn der Receiver (Heimkinosystem) angeschaltet ist, können Sie den Ton hören, der vom optischen Ausgang des Fernsehgeräts zur Verfügung gestellt wird. Wenn das Fernsehgerät ein (terrestrisches) DTV-Signal empfängt, überträgt das Fernsehgerät 5.1-Kanalton an den Receiver des Heimkinosystems. Wenn es sich bei der Signalquelle um eine digitale Komponente wie beispielsweise einen DVD-Player/Blu-Ray-Player/Kabel- /Satellitenreceiver (SetTop-Box) handelt, der über HDMI an das Fernsehgerät angeschlossen ist, kann der Receiver des Heimkinosystems nur Zweikanalton wiedergeben. Wenn Sie 5.1-Kanalton wünschen, müssen Sie den digitalen Ausdioausgang am DVD-/Blu-Ray-Player / Kabel- / Satellitenreceiver (Set-Top-Box) direkt an einen Verstärker oder ein Heimkinosystem anschließen. ✎Kopfhörer H: Sie können Ihre Kopfhörer an den Kopfhörer-Ausgang Ihres Fernsehgeräts anschließen. Wenn Kopfhörer angeschlossen sind, ist die Tonwiedergabe über die eingebauten Lautsprecher ausgeschaltet. x Wenn Sie Kopfhörer an das Fernsehgerät anschließen, ist die Tonfunktion eingeschränkt. x Die Lautstärke der Kopfhörer und des Fernsehgeräts werden getrennt geregelt. OPTICAL Anschluss für DVD-Heimkinosystem Kopfhöreranschluss [PD490-XN_ZF]BN68-03497E-02L04.indb 11 2011-03-07 오후 5:24:59Deutsch - 12 ¦ Mit Hilfe eines HDMI-, HDMI/DVI- oder D-Sub-Kabels ✎Der Anschluss über ein HDMI-Kabel wird je nach PC möglicherweise nicht unterstützt. Anzeigemodi (D-Sub- und HDMI/DVI-Eingang) • PS43D490: 1024 x 768 bei 60Hz • PS51D490: 1360 x 768 bei 60Hz Modus Auflösung Horizontalfrequenz (kHz) Vertikalfrequenz (Hz) Pixeltakt (MHz) Synchronisationspolarität (H/V) PS43D490 PS51D490 IBM 640 x 350 720 x 400 31,469 31,469 70,086 70,087 25,175 28,322 +/- -/+ c c c c MAC 640 x 480 832 x 624 35,000 49,726 66,667 74,551 30,240 57,284 -/- -/- c c c c VESA DMT 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1360 x 768 31,469 37,861 37,500 37,879 48,077 46,875 48,363 56,476 60,023 47,712 59,940 72,809 75,000 60,317 72,188 75,000 60,004 70,069 75,029 60,015 25,175 31,500 31,500 40,000 50,000 49,500 65,000 75,000 78,750 85,500 -/- -/- -/- +/+ +/+ +/+ -/- -/- +/+ +/+ c c c c c c c c c c c c c c c c c c c ✎HINWEIS x Bei Anschluss über ein HDMI/DVI-Kabel müssen Sie den HDMI IN 1(DVI)-Anschluss verwenden. x Das Zeilensprungverfahren wird nicht unterstützt. x Das Fernsehgerät funktioniert möglicherweise nicht ordnungsgemäß, wenn kein Standardmodus ausgewählt wird. x Separate- und Composite-Modus werden unterstützt. SOG (Sync On Green) wird nicht unterstützt. PC OUT AUDIO OUT AUDIO OUT DVI OUT HDMI OUT PC-Anschluss [PD490-XN_ZF]BN68-03497E-02L04.indb 12 2011-03-07 오후 5:25:00Deutsch - 13 Anschließen an den COMMON INTERFACE-Steckplatz Verwenden der „CI“- oder „CI+“-Karte Um Bezahlsender zu sehen, müssen Sie eine „CI“ oder „CI+“-Karte einsetzen. • Wenn Sie keine „CI“ oder „CI+“-Karte einsetzen, wird bei einigen Kanälen die Meldung „Gestörtes Signal“ angezeigt. • Die Verbindungsinformationen mit Telefonnummer, Kennung der „CI“ oder „CI+“-Karte, Hostkennung und anderen Angaben wird nach ungefähr 2 bis 3 Minuten angezeigt. Wenn eine Fehlermeldung angezeigt wird, wenden Sie sich bitte an Ihren Dienstanbieter. • Wenn die Kanalinformationskonfiguration abgeschlossen ist, wird die Meldung „Udating Completed“ Aktualisierung abgeschlossen) angezeigt. Dies bedeutet, dass die Kanalliste aktualisiert ist. ✎HINWEIS x Sie können die „CI“ oder „CI+“-Karte bei einem der örtlichen Kabelnetzbetreiber erwerben. x Ziehen Sie die „CI“- oder „CI+“-Karte vorsichtig mit den Händen heraus. Sie könnte beim Herunterfallen ansonsten beschädigt werden. x Die Richtung, in der Sie die „CI“ oder „CI+“-Karte einsetzen müssen, ist auf der Karte markiert. x Die Position des COMMON INTERFACE-Steckplatzes ist modellabhängig. x „CI“ oder „CI+“-Karten werden in einigen Ländern und Regionen nicht unterstützt. Fragen Sie diesbezüglich Ihren offiziellen Händler. x Wenden Sie sich bei Problemen an den Dienstanbieter. x Setzen Sie eine „CI“ oder „CI+“-Karte ein, die für die aktuellen Antenneneinstellungen geeignet ist. Andernfalls ist das Bild gestört oder es fällt aus. [PD490-XN_ZF]BN68-03497E-02L04.indb 13 2011-03-07 오후 5:25:00Deutsch - 14 So zeigen Sie das e-Manual an Bildschirmanzeige So wechseln Sie zwischen dem e-Manual und den entsprechenden Menüs. ✎Diese Funktion steht in einigen Menüs nicht zur Verfügung. Methode 1 Methode 2 1. Wählen Sie mit der roten Taste Jetzt test., wenn Sie die entsprechenden Menüs ausführen möchten. 2. Drücken Sie die Taste E-MANUAL, um zum Fenster des e-Manuals zurückzukehren. 1. Wählen Sie mit der Taste ENTERE das Inhaltsfenster aus. Die Meldung „Möchten Sie dies ausführen?“ wird angezeigt. Wählen Sie Ja aus, und drücken Sie die Taste ENTERE. Das Bildschirmmenü wird angezeigt. 2. Drücken Sie die Taste E-MANUAL, um zum Fenster des e-Manuals zurückzukehren. Sie können die Einleitung und die Anweisungen zu den TV-Funktionen auch in elektronischer Form auf Ihrem Fernsehgerät lesen. O MENUm→ Unterstützung → e-Manual → ENTERE ✎Drücken Sie die Taste E-MANUAL auf der Fernbedienung, um zum e-Manual zurückzukehren. ✎Wenn das Menü deaktiviert ist, können Sie die Funktion Jetzt test. nicht verwenden. Grundfunktionen Ändern des voreingestellten Bildmodus Anpassen der Bildeinstellungen Ändern des Bildformats Ändern der Bildoptionen Einstellen des Fernsehgeräts mithilfe Ihres PCs } Index E Eingabe e Beenden Fernsehbildschirm: Anzeigen des Bilds der aktuellen Eingangsquelle. Ändern Sie die Kategorie. Drücken Sie die Taste l oder r, um die gewünschte Kategorie auszuwählen. Anzeigen der Untermenüliste Drücken Sie die Taste ENTERE, um das gewünschte Untermenü auszuwählen. Bedientasten: }Blau (Index): Anzeigen des Index-Fensters. E Eingabe: Wählen Sie eine Kategorie oder ein Untermenü. eExit: Schließen des e-Manuals. E-MANUAL Jetzt test. E-MANUAL ‰ Ändern des voreingestellten Bildmodus ■ Wählen Sie Ihren bevorzugten Bildtyp aus. Bildmodus t • Dynamisch: Für helle Zimmer geeignet. • Standard: Für normale Umgebungen geeignet. • Natürlich für LED-Fernsehgeräte / Entspannen für Plasmafernsehgeräte : Für geringe Augenbelastung geeignet. • Film: Zum Anzeigen von Filmen in einem abgedunkelten Zimmer geeignet. • Unterhalt.: Zum Anzeigen von Filmen und Spielen geeignet. N Diese Funktion ist nur im PC-Modus verfügbar. ‰ Ändern des voreingestellten Bildmodus O MENUm → Bild → Bildmodus → ENTERE ■ Bildmodus Wählen Sie Ihren bevorzugten Bildtyp aus. N Wenn als Signalquelle PC eingestellt ist, können Sie im Bildmodus nur zwischen Standard und Unterhalt. wählen. • Dynamisch: Für helle Zimmer geeignet. • Standard: Für normale Umgebungen geeignet. • Film: Zum Anzeigen von Filmen in einem abgedunkelten Zimmer geeignet. • Unterhalt.: Zum Anzeigen von Filmen und Spielen geeignet. Grundfunktionen > Ändern des voreingestellten Bildmodus (5/10) a Jetzt test. b Start { Zoom } Index L Seite e Beenden Bild Bildmodus : Standard r Zellhelligkeit : 10 Kontrast : 100 Helligkeit : 45 Schärfe : 50 Farbe : 50 Farbton (G/R) : G50/R50 Bildschirmanpassung [PD490-XN_ZF]BN68-03497E-02L04.indb 14 2011-03-07 오후 5:25:07Deutsch - 15 Anzeigen der Inhalte Verwenden des Zoommodus Wenn Sie das e-Manual anzeigen, können Sie das Fenster mit der gelben Taste vergrößern. Mit der Taste u oder d können Sie durch das vergrößerte Fenster blättern. ✎Um zum vorherigen Menü zurückzukehren, drücken Sie die Taste RETURN. So suchen Sie mithilfe der Indexseite nach einen Stichwort ✎Diese Funktion wird, je nach Sprache, möglicherweise nicht unterstützt. 1. Wenn Sie nach einem Stichwort suchen möchten, wählen Sie mit der blauen Taste Index. 2. Wählen Sie mit der Taste l oder r den Anfangsbuchstaben des gewünschten Stichworts aus, und drücken Sie dann die Taste ENTERE. 3. Wählen Sie mit der Taste u oder d das gewünschte Stichwort aus, und drücken Sie dann die Taste ENTERE. 4. Sie können das Fenster der entsprechenden Anweisung im e-Manual anzeigen. ✎Drücken Sie die Taste RETURN, um das Index-Fenster zu schließen. R Zurück ‰ Ändern des voreingestellten Bildmodus O MENUm → Bild → Bildmodus → ENTERE ■ Bildmodus Wählen Sie Ihren bevorzugten Bildtyp aus. N Wenn als Signalquelle PC eingestellt ist, können Sie im Bildmodus nur zwischen Standard und Unterhalt. wählen. • Dynamisch: Für helle Zimmer geeignet. • Standard: Für normale Umgebungen geeignet. • Film: Zum Anzeigen von Filmen in einem abgedunkelten Zimmer geeignet. • Unterhalt.: Zum Anzeigen von Filmen und Spielen geeignet. a Jetzt test. b Start { Zoom } Index L Seite e Beenden Grundfunktionen > Ändern des voreingestellten Bildmodus (5/10) Inhaltsfenster: Wenn Sie ein Untermenü auswählen, können Sie die entsprechenden Inhalte anzeigen. Mit der Taste l oder r wechseln Sie zur vorherigen oder zur nächsten Seite. Bedientasten: aRot (Jetzt test.): Anzeigen der entsprechenden Menüs. b Grün (Start): Wechseln zum Startfenster des e-Manuals. { Gelb (Zoom): Vergrößern des Fensters. }Blau (Index): Anzeigen des Index-Fensters. L (Seite): Wechseln zur vorherigen oder zur nächsten Seite. ‰ Ändern des voreingestellten Bildmodus O MENUm → Bild → Bildmodus → ENTERE ■ Bildmodus Wählen Sie Ihren bevorzugten Bildtyp aus. N Wenn als Signalquelle PC eingestellt ist, können Sie im Bildmodus nur zwischen Standard und Unterhalt. wählen. • Dynamisch: Für helle Zimmer geeignet. • Standard: Für normale Umgebungen geeignet. • Film: Zum Anzeigen von Filmen in einem abgedunkelten Zimmer geeignet. • Unterhalt.: Zum Anzeigen von Filmen und Spielen geeignet. [PD490-XN_ZF]BN68-03497E-02L04.indb 15 2011-03-07 오후 5:25:08Deutsch - 16 Anbringen der Wandhalterung Anbringen der Wandhalterung Mit der (separat erhältlichen) Wandhalterung können Sie das Fernsehgerät an einer Wand befestigen. Detaillierte Informationen zum Montieren der Wandhalterung finden Sie in den Anweisungen, die im Lieferumfang der Wandhalterung enthalten sind. Lassen Sie sich beim Anbringen der Wandhalterung von einem Techniker helfen. Samsung Electronics haftet nicht für Schäden an Gerät oder Personen, wenn die Montage vom Kunden selbst durchgeführt wird. Spezifikation (VESA) der Wandhalterung ✎Die Wandhalterung wird nicht mitgeliefert, ist aber gesondert erhältlich. Montieren Sie die Wandhalterung an einer soliden Wand, die senkrecht zum Boden steht. Bei Installation auf anderen Trägermaterialien wenden Sie sich bitte an Ihren Fachhändler. Bei Montage an einer Decke oder schrägen Wand kann das Fernsehgerät herunterfallen und zu Verletzungen führen. ✎HINWEIS x Die Standardabmessungen der Wandhalterung finden Sie in der nachfolgenden Tabelle. x Beim Kauf unserer Wandhalterung erhalten Sie ein detailliertes Installationshandbuch sowie alle für die Montage erforderlichen Teile. x Verwenden Sie keine Schrauben, die nicht der VESA-Standardspezifikation für Schrauben entsprechen. x Verwenden Sie keine Schrauben, die länger sind als in der VESA-Standardspezifikation für Schrauben angegeben. Zu lange Schrauben können Schäden an den inneren Bauteilen des Fernsehgeräts verursachen. x Bei Wandhalterungen, die nicht der VESA-Standardspezifikation für Schrauben entsprechen, hängt die Länge der Schrauben von der Spezifikation der Wandhalterung ab. x Ziehen Sie die Schrauben nicht zu fest an, weil Sie auf diese Weise das Gerät beschädigen könnten oder weil das Gerät dadurch herunterfallen und damit Verletzungen verursachen könnte. Samsung haftet nicht bei derartigen Unfällen. x Samsung haftet nicht für Geräteschäden oder Verletzungen, wenn eine Wandhalterung verwendet wird, die nicht dem VESA-Standard entspricht oder nicht spezifiziert ist, oder wenn der Verbraucher die Installationsanleitung für das Produkt nicht befolgt. x Montieren Sie das Fernsehgerät nicht in einem Winkel von mehr als 15 Grad. Produktfamilie Zoll VESASpezifikation (A * B) Standardschraube Menge Plasmabildschirm 43~51 400 X 400 M8 4 59~64 600 X 400 ✎Lösen Sie die Schrauben des Lochkreises, ehe Sie die Wandhalterung an der Wand befestigen. Installieren Sie die Wandhalterung nicht bei eingeschaltetem Fernsehgerät. Sie könnten dabei einen Stromschlag erhalten und sich verletzen. [PD490-XN_ZF]BN68-03497E-02L04.indb 16 2011-03-07 오후 5:25:08Deutsch - 17 Fehlerbehebung Bei Fragen zum Fernsehgerät schauen Sie zuerst in dieser Liste nach. Wenn keiner dieser Tipps zur Fehlerbehebung weiterhilft, öffnen Sie die Website „www.samsung.com“ und klicken Sie dort auf „Support“ oder wenden Sie sich an das in der Liste auf der letzten Seite angegebene Callcenter. Probleme Lösungen und Erklärungen Der Fernseher kann nicht eingeschaltet werden. • Vergewissern Sie sich, dass das Netzkabel sicher mit der Wandsteckdose und dem Fernsehgerät verbunden ist. • Vergewissern Sie sich, dass die Netzsteckdose Strom liefert. • Drücken Sie die Taste POWER am Fernsehgerät, um zu prüfen, ob die Fernbedienung richtig funktioniert. Wenn das Fernsehgerät angeht, lesen Sie den Abschnitt „Die Fernbedienung funktioniert nicht“ weiter unten. Kein Bild/Video. • Überprüfen Sie die Kabelverbindungen. Unterbrechen Sie kurzzeitig alle Kabelverbindungen zwischen dem Fernsehgerät und den externen Geräten. • Stellen Sie den Videoausgang Ihres externen Geräts (Kabel-/Satellitenreceiver, DVD-/Blu-ray-Player usw.) so ein, dass er zur Verbindung mit dem Fernsehgerät passt. Zum Beispiel: Wenn der HDMI-Ausgang des externen Geräts verwendet wird, schließen Sie es an den HDMI-Eingangs Ihres Fernsehers an. • Stellen Sie sicher, dass die angeschlossenen Geräte eingeschaltet sind. • Vergewissern Sie sich, dass die richtige Signalquelle für den Fernseher eingestellt ist. Drücken Sie dazu die Taste SOURCE auf der Fernbedienung. Die Fernbedienung funktioniert nicht. • Ersetzen Sie die Batterien der Fernbedienung, und achten Sie dabei auf die richtige Polung (+/-). • Reinigen Sie das Sendefeld der Fernbedienung. • Zeigen Sie mit der Fernbedienung aus 1,5 bis 2 m Entfernung direkt auf das Fernsehgerät. Die Fernbedienung des Kabel-/ Satellitenreceivers schaltet das Fernsehgerät nicht ein/aus oder regelt auch nicht die Lautstärke. • Programmieren Sie die Fernbedienung des Kabel-/Satellitenreceivers so, dass sie das Fernsehgerät anspricht. Den Code für SAMSUNG TV finden Sie in der Bedienungsanleitung für Ihren Kabel-/ Satellitenreceiver. ✎Manche der obigen Abbildungen und Funktionen gibt es nur bei bestimmten Modellen. ✎Sie können den optimalen Zustand Ihres Fernsehgeräts erhalten, indem Sie die aktuelle Firmware per USB von der Website (samsung.com → Unterstützung → Downloads) herunterladen. Lizenz Liste der Funktionen Hervorragende digitale Schnittstelle und Netzwerkverbindung: Mit dem eingebauten digitalen HDTV-Tuner können Sie unverschlüsselte HDTV-Sendungen ohne zusätzlichen Kabel-/Satellitenreceiver empfangen. 3D Mit dieser aufregenden neuen Funktion können Sie Inhalte räumlich anzeigen. Anynet+ (HDMI-CEC) Dabei handelt es sich um eine Funktion, mit der Sie alle angeschlossenen Samsung-Geräte, die Anynet+ unterstützen, mit der Fernbedienung für Ihr Samsung-Fernsehgerät steuern können. Eigene Inhalte Hiermit können Sie Musikdateien, Bilder und Filme abspielen, die auf einem USB-Gerät gespeichert sind. [PD490-XN_ZF]BN68-03497E-02L04.indb 17 2011-03-07 오후 5:25:09Deutsch - 18 Befestigen des Fernsehgeräts an der Wand Achtung: Das Fernsehgerät kann hinfallen, wenn Sie daran ziehen, es schieben oder darauf klettern. Stellen Sie insbesondere sicher, dass sich keine Kinder an das Gerät hängen oder es aus dem Gleichgewicht bringen. Anderenfalls könnte das Gerät umkippen und zu schweren Verletzungen oder dem Tod führen. Beachten Sie alle Anweisungen der beigefügten Sicherheitshinweise. Noch mehr Stabilität und Sicherheit erreichen Sie, wenn Sie den Kippschutz installieren. Gehen Sie dazu folgendermaßen vor. So verhindern Sie, dass das Fernsehgerät umkippt 1. Stecken Sie die Schrauben durch die Halterungen und befestigen Sie sie fest an der Wand. Vergewissern Sie sich, dass die Schrauben gut halten. ✎Je nach Ausführung der Wand benötigen Sie zum Befestigen weiteres Material, wie z. B. Dübel. ✎Da die benötigten Halterungen, Schrauben und das Band nicht zum Lieferumfang gehören, müssen Sie diese Teile gesondert erwerben. 2. Entfernen Sie die Schrauben in der Mitte auf der Rückseite des Fernsehgeräts. Setzen Sie diese Schrauben in die Halterungen ein, und befestigen Sie die Schrauben dann wieder am Fernsehgerät. ✎Die Schrauben werden möglicherweise nicht zusammen mit dem Gerät geliefert. Kaufen Sie in diesem Fall Schrauben entsprechend den folgenden Angaben. 3. Verbinden Sie die Halterungen an der Wand und die Halterung am Fernsehgerät mit einem festen Kabel miteinander, und ziehen Sie es dann fest. ✎HINWEIS x Stellen Sie das Fernsehgerät in der Nähe der Wand auf, damit es nicht nach hinten kippen kann. x Es ist noch sicherer, wenn die Halterungen an der Wand niedriger als die Halterungen am Fernsehgerät sind. x Lösen Sie das Band, ehe Sie den Fernseher bewegen. 4. Kontrollieren Sie, ob alle Befestigungen ordnungsgemäß gesichert sind. Prüfen Sie regelmäßig die Verbindungen auf Zeichen von Ermüdung oder Versagen. Bei Zweifeln hinsichtlich der Sicherheit Ihrer Halterungen wenden Sie sich an einen professionellen Installationsbetrieb. Lagerung und Wartung ✎Wenn Sie Aufkleber auf dem Bildschirm des Fernsehgeräts anbringen, bleiben nach dem Entfernen Kleberückstände zurück. Entfernen Sie diese, bevor Sie fernsehen. Sprühen Sie kein Wasser oder Reinigungsmittel direkt auf das Gerät. Jede Flüssigkeit, die in das Gerät eindringt, kann zu einer Funktionsstörung, einem Brand oder einem Stromschlag führen. Reinigen Sie das Gerät mit einem weichen Tuch, das Sie vorher mit einer kleinen Menge Wasser anfeuchten. Wand [PD490-XN_ZF]BN68-03497E-02L04.indb 18 2011-03-07 오후 5:25:10Deutsch - 19 Technische Daten Umgebungsbedingungen Betriebstemperatur Luftfeuchtigkeit (bei Betrieb) Temperatur (Lagerung) Luftfeuchtigkeit (Lagerung) 10° C bis 40° C (50°F bis 104°F) 10% bis 80%, nicht kondensierend -20° C bis 45° C (-4°F bis 113°F) 5% bis 95%, nicht kondensierend TV-System Analog: B/G, D/K, L, I (je nach eingestelltem Land) Digital: DVB-T/DVB-C Fernsehnorm/Videosystem: Analog: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60 Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0 Audiosystem BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC. HDMI IN Video: 1080 24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i Audio: 2-Kanal-Linear-PCM 32/44.1/48 kHz, 16/20/24 Bit. Drehbarer Fuß (Links / Rechts) -20˚ ~ 20˚ Modellname PS43D490 PS51D490 Bildschirmgröße 43 Zoll (109 cm) 51 Zoll (128 cm) Ton (Ausgang) 10 W x 2 Abmessungen (BxTxH) Gehäuse Mit Fuß 1011,8 X 56,0 X 622,4 mm 1011,8 X 305,0 X 698,7 mm 1187,8 X 56,0 X 706,6 mm 1187,8 X 305,0 X 782,9 mm Gewicht Ohne Fuß Mit Fuß 16,0 kg 20,3 kg 22,5 kg 26,8 kg Anzeigeauflösung 1024 X 768 1360 X 768 ✎Änderungen der technischen Daten und des Geräte-Designs vorbehalten. ✎Die technischen Daten zur benötigten Netzspannung und zum Energieverbrauch finden Sie auf dem Etikett am Produkt. ✎Hiermit erklärt Samsung, dass sich das Gerät PDP TV in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet. [PD490-XN_ZF]BN68-03497E-02L04.indb 19 2011-03-07 오후 5:25:10Nederlands - 2 Voor meer informatie over het gebruik van de E-handleiding (pag.14) De figuren en illustraties in deze gebruikershandleiding dienen alleen ter referentie en kunnen afwijken van het werkelijke uiterlijk van het product. Het ontwerp en de specificaties van het product kunnen zonder kennisgeving worden gewijzigd. Opmerking over digitale tv 1. Functionaliteit betreffende digitale televisie (DVB) is alleen beschikbaar in landen/gebieden waar digitale DVB-T-televisiesignalen (MPEG2 en MPEG4 AVC) per zendmast worden uitgezonden of waar u toegang hebt tot een compatibele DVB-C-service (MPEG2 en MPEG4 AAC) voor kabel-tv. Informeer bij een lokale dealer of u DVB-T- of DVB-C-signalen kunt ontvangen. 2. DVB-T is de Europese DVB-consortiumnorm voor de uitzending van digitale televisie per zendmast en DVB-C voor de uitzending van digitale televisie over de kabel. Bepaalde specifieke functies, zoals EPG (Elektronische programmagids), VOD (Video on Demand) enzovoort, zijn echter niet opgenomen in deze specificatie. Deze werken dus op dit moment nog niet. 3 Hoewel dit televisietoestel voldoet aan de huidige DVB-T- en DVB-C-normen vanaf [augustus 2008], kan de compatibiliteit met toekomstige digitale DVB-T-signalen via de zendmast en digitale DVB-C-signalen via de kabel niet worden gegarandeerd. 4. Afhankelijk van de landen/gebieden waar dit televisietoestel wordt gebruikt, kunnen leveranciers van kabeltelevisie aanvullende kosten voor dergelijke services in rekening brengen en moet u wellicht akkoord gaan met hun voorwaarden en bepalingen. 5. Bepaalde digitale televisiefuncties zijn mogelijk niet beschikbaar in bepaalde landen of regio’s en DVB-C werkt mogelijk niet goed met bepaalde leveranciers van kabelservices. 6. Neem voor meer informatie contact op met de klantendienst van Samsung. ✎ De ontvangstkwaliteit van televisie-uitzendingen kan minder goed zijn door verschil in uitzendmethode tussen landen. Controleer de televisieprestaties bij uw plaatselijke geautoriseerde SAMSUNG-dealer of bel de klantenservice van Samsung om te informeren of u de kwaliteit kunt verbeteren door de tv-instellingen aan te passen. Instructies voor gebruik • Beeldretentie Geef een stilstaand beeld (bijvoorbeeld van een videospel) niet langer dan enkele minuten op het plasmascherm weer, omdat dit beeldretentie kan veroorzaken. Beeldretentie wordt ook wel ‘inbranden’ genoemd. Verlaag bij de weergave van een stilstaand beeld de helderheid en het contrast om beeldretentie te voorkomen. • Warmte op de bovenkant van de plasma-tv De bovenkant van het scherm kan na een lange gebruiksperiode erg warm worden, omdat de warmte van het scherm zich door het ventilatiegat aan de bovenkant van het toestel verspreidt. Dit is normaal en duidt niet op een defect of storing. Zorg dat kinderen de bovenkant van het product niet kunnen aanraken. • Het product maakt een ‘krakend’ geluid. Een ‘krakend’ geluid kan optreden als het product uitzet of inkrimpt door een verandering in de omgeving, zoals de temperatuur of de luchtvochtigheid. Dit is normaal en duidt niet op een defect. • Celdefecten Het plasmascherm gebruikt een paneel dat bestaat uit 2.360.000 (HD-niveau) tot 6.221.000 (FHD-niveau) pixels, wat het gebruik van geavanceerde productietechnologie vereist. Het scherm kan echter enkele heldere of donkere pixels bevatten. Deze pixels zijn niet van invloed op de prestaties van het product. • Gebruik de tv niet bij een temperatuur lager dan 5°C • Als u een stilstaand beeld te lang op het scherm weergeeft, kan plasmascherm permanent beschadigd raken. Als u gedurende langere tijd naar uw plasma-tv kijkt terwijl het beeld in 4:3-formaat wordt weergegeven, kunnen aan de linker- en rechterkant en in het midden van het scherm randen achterblijven. Hetzelfde effect kan optreden wanneer u een dvd afspeelt of een spelcomputer gebruikt. Schade ontstaan door het bovengenoemde effect valt niet onder de garantie. • Scherminbranding. Het gedurende langere tijd weergeven van stilstaande beelden van dvd’s of computerspellen kan (gedeeltelijke) scherminbranding tot gevolg hebben. Om dit te voorkomen, kunt u tijdens het langdurig weergeven van stilstaande beelden de ‘helderheid’ en het ‘contrast’ verminderen. • Garantie De garantievoorwaarden gelden niet voor schade veroorzaakt door beeldretentie. Het inbranden van het scherm valt niet onder de garantievoorwaarden. Correcte verwijdering van dit product (elektrische & elektronische afvalapparatuur) Dit merkteken op het product, de accessoires of het informatiemateriaal duidt erop dat het product en zijn elektronische accessoires (bv. lader, headset, USB-kabel) niet met ander huishoudelijk afval verwijderd mogen worden aan het einde van hun gebruiksduur. Om mogelijke schade aan het milieu of de menselijke gezondheid door ongecontroleerde afvalverwijdering te voorkomen, moet u deze artikelen van andere soorten afval scheiden en op een verantwoorde manier recyclen, zodat het duurzame hergebruik van materiaalbronnen wordt bevorderd. Huishoudelijke gebruikers moeten contact opnemen met de winkel waar ze dit product hebben gekocht of met de gemeente waar ze wonen om te vernemen waar en hoe ze deze artikelen milieuvriendelijk kunnen laten recyclen. Zakelijke gebruikers moeten contact opnemen met hun leverancier en de algemene voorwaarden van de koopovereenkomst nalezen. Dit product en zijn elektronische accessoires mogen niet met ander bedrijfsafval voor verwijdering worden gemengd. Correcte behandeling van een gebruikte accu uit dit product (Van toepassing op de Europese Unie en andere Europese landen met afzonderlijke inzamelingssystemen voor accu’s en batterijen.) Dit merkteken op de accu, handleiding of verpakking geeft aan dat de accu in dit product aan het einde van de levensduur niet samen met ander huishoudelijk afval mag worden weggegooid. De chemische symbolen Hg, Cd of Pb geven aan dat het kwik-, cadmium- of loodgehalte in de accu hoger is dan de referentieniveaus in de Richtlijn 2006/66/EC. Indien de gebruikte accu niet op de juiste wijze wordt behandeld, kunnen deze stoffen schadelijk zijn voor de gezondheid van mensen of het milieu. Ter bescherming van de natuurlijke hulpbronnen en ter bevordering van het hergebruik van materialen, verzoeken wij u afgedankte accu’s en batterijen te scheiden van andere soorten afval en voor recycling aan te bieden bij het gratis inzamelingssysteem voor accu’s en batterijen in uw omgeving. [PD490-XN_ZF]BN68-03497E-02L04.indb 2 2011-03-07 오후 5:25:11Nederlands - 3 Accessoires ✎Controleer of de volgende onderdelen bij uw tv geleverd zijn. Neem contact op met uw verkoper als er onderdelen ontbreken. ✎De vorm en kleur van de items kunnen enigszins afwijken. Dit is afhankelijk van het model. ✎Kabels die niet bij het product worden geleverd, kunnen apart worden aangeschaft. ✎Controleer of er geen accessoire is achtergebleven in het verpakkingsmateriaal in de doos. [LET OP: STEVIG BEVESTIGEN ZODAT DE ADAPTER GOED IS VASTGEKOPPELD • Afstandsbediening en batterijen (AAA x 2) • Netsnoer • Gebruikershandleiding • Schoonmaakdoekje • Garantiekaart (niet op alle locaties beschikbaar) / Veiligheidsvoorschriften alleen 43-inch model Ferrietkern (2EA) ✎Ferrietkern voor netsnoer: De ferrietkernen worden gebruikt om de kabels af te schermen van interferentie. Open de ferrietkern bij het aansluiten van een kabel en klem deze om de kabel bij de plug, zoals wordt weergegeven in de afbeelding. x A Minimale afstand tussen de ferrietkern en het uiteinde van het snoer in de tv: 6~8 inch (15~20 cm) x B Maximale afstand tussen de ferrietkern en het uiteinde van het snoer dat op de stroom is aangesloten: 3/4 inch (2 cm) Netsnoer A B [PD490-XN_ZF]BN68-03497E-02L04.indb 3 2011-03-07 오후 5:25:11Nederlands - 4 alleen 51-inch model Ferrietkern (2EA) Ferrietkern (1EA) ✎Ferrietkern voor netsnoer: De ferrietkernen worden gebruikt om de kabels af te schermen van interferentie. Open de ferrietkern bij het aansluiten van een kabel en klem deze om de kabel bij de plug, zoals wordt weergegeven in de afbeelding. x A Minimale afstand tussen de ferrietkern en het uiteinde van het snoer in de tv: 6~8 inch (15~20 cm) x B Maximale afstand tussen de ferrietkern en het uiteinde van het snoer dat op de stroom is aangesloten: 3/4 inch (2 cm) Netsnoer ✎Ferrietkern: De ferrietkernen worden gebruikt om de kabels af te schermen van interferentie. Open de ferrietkern bij het aansluiten van een kabel en klem deze om de kabel bij de plug, zoals wordt weergegeven in de afbeelding. Antennekabel / componentkabel (afzonderlijk verkrijgbaar) • In de volgende gevallen kunnen administratiekosten in rekening worden gebracht: – (a) Er wordt op uw verzoek een engineer gestuurd, maar het product is niet defect (wanneer u deze gebruikershandleiding niet hebt gelezen). – (b) U brengt het apparaat naar een reparatiecentrum, maar het product is niet defect (wanneer u deze gebruikershandleiding niet hebt gelezen). • U wordt op de hoogte gesteld van deze administratiekosten voordat een dergelijke reparatie of bezoek wordt uitgevoerd. A B [PD490-XN_ZF]BN68-03497E-02L04.indb 4 2011-03-07 오후 5:25:12Nederlands - 5 Overzicht van het bedieningspaneel ✎De vorm en kleur van het product kunnen afhankelijk van het model variëren. Sensor voor de afstandsbediening Richt de afstandsbediening op dit punt van de tv. Aan/uit-lampje Als de stroom is ingeschakeld, knippert het lampje even en gaat het vervolgens uit. In de stand-bymodus blijft het aan. SOURCEE Hiermee schakelt u tussen de beschikbare ingangsbronnen. Gebruik deze toets in het schermmenu zoals u de toets ENTERE op de afstandsbediening gebruikt. MENU y Hiermee wordt het schermmenu met de functies van de tv weergegeven. Hiermee regelt u het volume. Gebruik de y-toetsen in het z schermmenu zoals u de toetsen ◄ en ► op de afstandsbediening gebruikt. Hiermee wisselt u van kanaal. Gebruik de z-toetsen in het schermmenu zoals u de toetsen ▼ en ▲ op de afstandsbediening gebruikt. P (Aan/uit) Hiermee schakelt u de tv in en uit. Stand-bymodus Laat de tv niet gedurende langere tijd in de stand-bymodus staan (bijvoorbeeld wanneer u op vakantie bent). Zelfs wanneer het apparaat via de aan/uit-knop is uitgeschakeld, wordt een kleine hoeveelheid stroom gebruikt. U kunt het netsnoer het beste loskoppelen. Installatieruimte Bewaar de nodige afstand tussen het product en andere objecten (bijvoorbeeld muren) zodat er een goede ventilatie mogelijk is. Wanneer u dit niet doet, kunnen er door een stijging van de interne temperatuur brand of problemen bij het product ontstaan. ✎Bij gebruik van een voet of wandbevestiging mogen er alleen onderdelen worden gebruikt die door Samsung Electronics zijn geleverd. x Het gebruik van onderdelen van een andere fabrikant kan leiden tot problemen met het product of zelfs tot lichamelijk letsel doordat het product valt. ✎Het uiterlijk van het product kan afwijken van het afgebeelde apparaat. ✎Wees voorzichtig wanneer u de tv aanraakt. Sommige onderdelen kunnen heet zijn. Plaatsing op een voet. Plaatsing met een wandbevestiging. 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm Configuratiescherm [PD490-XN_ZF]BN68-03497E-02L04.indb 5 2011-03-07 오후 5:25:12Nederlands - 6 Overzicht van de afstandsbediening ✎Dit is een speciale afstandsbediening voor visueel gehandicapten en heeft brailletekens op de kanaal- en cijfertoetsen. Batterijen plaatsen (batterijformaat: AAA) Hiermee schakelt u de tv in en uit. De beschikbare videobronnen weergeven en selecteren. Hiermee gaat u terug naar het vorige kanaal. Hiermee wordt het geluid tijdelijk uitgeschakeld. Hiermee worden kanalen gewijzigd. Hiermee wordt de kanaallijst op het scherm weergegeven. De EPG (Electronic Programme Guide) weergeven. hiermee wordt informatie op het tvscherm weergegeven. u/d/l/r: beweeg de cursor op het scherm voor het menu-item. ENTERE: selecteert het menu en kiest de overeenkomstige itemwaarde. hiermee kunt u het menu afsluiten. Directe toegang tot kanalen. Hiermee regelt u het volume. Wisselen tussen Teletekst AAN, Dubbel, Mix of UIT. Hiermee wordt het schermmenu geopend. snel veelgebruikte functies selecteren. Geeft het beginscherm inhoud weer, met Tv kijken, Mijn inhoud en Bron. hiermee gaat u terug naar het vorige menu. Deze toetsen zijn voor het menu van Kanaalbeheer, Mijn inhoud enzovoort. Gebruik deze toetsen in de modi Mijn inhoud en Anynet+. P.MODE: druk op deze toets om de Beeldmodus te selecteren. W: hiermee stelt u de video met een 3D-signaal in. DUALf-g: Geluidseffect selecteren. E-MANUAL: de e-Manual weergeven. P.SIZE: het Beeldformaat selecteren. AD/SUBT.: hiermee wordt de audiobeschrijving in- en uitgeschakeld (op enkele locaties niet beschikbaar). / digitale ondertiteling weergeven. [PD490-XN_ZF]BN68-03497E-02L04.indb 6 2011-03-07 오후 5:25:13Nederlands - 7 De ingangsbron wijzigen Bron Hiermee kunt u de tv of een externe ingangsbron selecteren, zoals een dvdspeler/Blu-rayspeler/kabelbox/STBsatellietontvanger. 1. Druk op de SOURCE toets op de afstandsbediening. 2. Selecteer de gewenste externe ingangsbron. ✎U kunt de kijkmodus wijzigen voor Alle en Verbonden door op de toets l of r te drukken. ■ TV / Ext. / PC / HDMI1/DVI / HDMI2 / HDMI3 / AV / Component / USB ✎In de Bron worden aangesloten ingangen gemarkeerd. ✎Ext. en PC blijven altijd geactiveerd. ✎Als de aangesloten externe apparaten niet zijn gemarkeerd, druk dan op de rode toets. De tv zoekt dan naar aangesloten apparaten. Naam wijzigen Druk in de Bron op de toets TOOLS. Hier kunt u een naam voor externe-invoerbron instellen. ■ VCR / DVD / Kabel STB / Satelliet STB / PVR STB / AV-ontvanger / Spelcomputer / Camcorder / PC / DVI PC / DVI-apparaten / TV / IPTV /Blu-ray / HD DVD / DMA: geef het apparaat dat op de ingangen is aangesloten, een naam om de selectie van de ingangsbron gemakkelijker te maken. ✎Waneer u een pc met een HDMI-kabel aansluit op de HDMI IN 1(DVI)-poort, moet u de tv instellen op de modus PC onder Naam wijzigen. (PS51D490) ✎Waneer u een pc met een HDMI-naar-DVI-kabel aansluit op de HDMI IN 1(DVI)-poort, moet u de tv instellen op de modus DVI PC onder Naam wijzigen. (PS51D490) ✎Waneer u AV-apparaat met een HDMI-naar-DVIkabel aansluit op de HDMI IN 1(DVI)-poort, moet u de tv instellen op de modus DVI-apparaten onder Naam wijzigen. (PS43D490, PS51D490) Informatie Hiermee kunt u gedetailleerde informatie over het geselecteerde externe apparaat weergeven. Aansluiten op een antenne Wanneer u de tv voor het eerst inschakelt, worden er automatisch enkele basisinstellingen uitgevoerd. ✎Vooraf doen: het netsnoer en de antenne aansluiten. ✎Het PDP-apparaat kan de ontvangst van amateur- en AM-zenders storen. ✎Het gebruik van een tweezijdig radiosysteem en draagbare unit of amateruradio of AM-radio in de buurt van uw tv kan leiden tot een niet goed functionerende tv. Kabel VHF/UHF-antenne of Netvoeding [PD490-XN_ZF]BN68-03497E-02L04.indb 7 2011-03-07 오후 5:25:13Nederlands - 8 Plug & Play (eerste instelling) Wanneer de tv voor het eerst wordt ingeschakeld, verschijnen er een enkele instructies op het scherm die u helpen de basisinstellingen te configureren. Druk op de toets POWERP. Plug & Play is alleen beschikbaar als de Bron is ingesteld op tv. ✎Zorg ervoor dat de antennekabel is aangesloten voordat u de tv inschakelt (p. 6). ✎Om terug te keren naar het vorige menu drukt u op de rode toets. 1 Een taal selecteren Druk op de toets ▲ of ▼ en druk vervolgens op de toets ENTERE. Selecteer de gewenste taal voor het schermmenu. 2 Selecteer Winkeldemo of Thuisgebruik. Druk op de toets ◄ of ► en druk vervolgens op de toets ENTERE. Selecteer de modus Thuisgebruik. De modus Winkeldemo is alleen bedoeld voor gebruik in winkels. De instellingen van het apparaat van Winkeldemo terugzetten op Thuisgebruik (standaard): druk op de volumeknop op de tv. Wanneer het schermmenu voor het volume wordt weergegeven, houdt u MENU 5 seconden ingedrukt. Winkeldemo is alleen voor winkelweergave. Als u deze modus selecteert, zijn verschillende functies niet beschikbaar. Selecteer Thuisgebruik als u thuis kijkt. 3 Uw land selecteren Druk op de toets ▲ of ▼ en druk vervolgens op de toets ENTERE. Selecteer uw land. (afhankelijk van het land) ✎Bij bepaalde modellen kunt u ervoor kiezen om een pincode in te stellen nadat u in het menu Land uw land hebt geselecteerd. ✎Wanneer u een pincode invoert, is “0-0-0-0” niet beschikbaar. 4 De Klokmodus instellen Stel de Klokmodus automatisch of handmatig in. Auto: Selecteer uw tijdzone. Handm.: hier kunt u de datum en tijd handmatig instellen. 5 Een antenne selecteren Druk op de toets ▲ of ▼ en druk vervolgens op de toets ENTERE. Selecteer antennebron om te onthouden. 6 Een kanaal selecteren Druk op de toets ▲ of ▼ en druk vervolgens op de toets ENTERE. Selecteer de kanaalbron die moet worden opgeslagen. Wanneer u de antennebron als Kabel instelt, kunt u numerieke waarden (kanaalfrequenties) voor de kanalen opgeven. Zie voor meer informatie Kanaal → Automatisch afstemmen. 7 Veel kijkplezier. Druk op de toets ENTERE. Als u deze functie wilt resetten... Ook al hebt u dit al in de winkel gedaan, moet u nogmaals Plug & Play (MENU → Systeem) uitvoeren. Selecteer Systeem – Plug & Play (eerste instelling). Voer uw viercijferige pincode in. De standaardpincode is ‘0- 0-0-0’ (behalve Frankrijk). Als u de pincode wilt wijzigen, gebruikt u de functie PIN wijzigen. ✎Als u de pincode bent vergeten, drukt u in de stand-bymodus achtereenvolgens op de volgende toetsen van de afstandsbediening zodat de pincode opnieuw wordt ingesteld op ‘0-0-0-0’: MUTE → 8 → 2 → 4 → POWER (aan). P POWER [PD490-XN_ZF]BN68-03497E-02L04.indb 8 2011-03-07 오후 5:25:14Nederlands - 9 Aansluiten op een AV-apparaat ¦ Beschikbare apparaten: dvd-speler, Blu-rayspeler, HD-kabelbox, Satelliet STB (settopbox), Videorecorder Een HDMI- een HDMI-naar-DVI-kabel gebruiken (tot 1080p) ✎HDMI IN 1(DVI), 2, 3 / PC/DVI AUDIO IN x Bij gebruik van de HDMI/DVI-kabelverbinding, moet u de HDMI IN 1(DVI)-aansluiting voor video gebruiken. Voor een dvd-speler, Blu-rayspeler, HD-kabelbox of HD STB-satellietontvanger hebt u mogelijk een DVI-HDMI-kabel(DVI-naar-HDMI) of DVI-HDMI-adapter (DVI-naar-HDMI) nodig. Voor audio hebt u de PC/DVI AUDIO IN-aansluiting nodig. x Mogelijk wordt het beeld niet normaal (of helemaal niet) weergegeven of werkt het geluid niet als een extern apparaat dat met een oudere versie van HDMI werkt, op de televisie wordt aangesloten. Als een dergelijk probleem zich voordoet, informeert u bij de fabrikant van het externe apparaat naar de HDMI-versie die wordt ondersteund en vraagt u, als deze verouderd is, om een upgrade. x Let op dat u een goedgekeurde HDMI-kabel aanschaft. Anders wordt het beeld mogelijk niet weergegeven of treedt er een verbindingsfout op. USB HDMI IN HDMI OUT DVI OUT AUDIO OUT R-AUDIO-L W R HDMI-verbinding HDMI-naar-DVI-verbinding [PD490-XN_ZF]BN68-03497E-02L04.indb 9 2011-03-07 오후 5:25:14Nederlands - 10 Een component gebruiken (maximaal 1080p) of een audio/video (uitsluitend 480i) en een scartkabel gebruiken ✎In de modus Ext. ondersteunt DTV Out alleen MPEG SD-video en -audio. ✎Wanneer u verbinding maakt met AV IN, komt de kleur van de AV IN [Y/VIDEO]-aansluiting (groen) niet overeen met die van de videokabel (geel). ✎Voor de beste beeldkwaliteit kunt u beter de componentaansluiting in plaats van de A/V-aansluiting gebruiken. AUDIO OUT R-AUDIO-L VIDEO OUT AUDIO OUT R-AUDIO-L PR PB Y COMPONENT OUT EXT Component-verbinding AV-verbinding SCART-verbinding [PD490-XN_ZF]BN68-03497E-02L04.indb 10 2011-03-07 오후 5:25:15Nederlands - 11 Verbinding maken met een pc en audio-apparaat ¦ Beschikbare apparaten: digitaal audiosysteem, versterker, dvd-thuisbioscoop, PC Een optische (digitale) aansluiting of een hoofdtelefoonaansluiting gebruiken ✎DIGITAL AUDIO OUT (OPTICAL) x Wanneer een digitaal audiosysteem op de DIGITAL AUDIO OUT (OPTICAL)-aansluiting wordt aangesloten, moet u het volume van zowel de tv als het audiosysteem reduceren. x 5.1-kanaals audio is mogelijk wanneer de tv op een extern apparaat is aangesloten dat dit ondersteunt. x Wanneer de ontvanger (thuisbioscoop) is ingesteld op Aan, hoort u alleen geluid via de optische aansluiting van de tv. Wanneer de tv een DTV-signaal ontvangt, zendt de tv een 5.1-kanaalsgeluid naar de ontvanger van de thuisbioscoop. Wanneer de bron een digitale component is, zoals een dvdspeler/blu-rayspeler/kabelbox/STB-satellietontvanger (settopbox) en via HDMI op de tv is aangesloten, geeft de ontvanger van de thuisbioscoop alleen 2-kanaalsgeluid weer. Als u 5.1-kanaalsgeluid wilt horen, sluit u de digitale uitgang van de dvd-speler/Blu-rayspeler/kabelbox/STB-satellietontvanger (settopbox) rechtstreeks op een versterker of thuisbioscoop aan. ✎Hoofdtelefoon H: u kunt een hoofdtelefoon op de desbetreffende uitgang van uw set aansluiten. Wanneer de hoofdtelefoon is aangesloten, worden de ingebouwde luidsprekers uitgeschakeld. x Mogelijk kunt u de geluidsfunctie beperkt gebruiken wanneer er een hoofdtelefoon op de tv is aangesloten. x Het volume van de hoofdtelefoon en het volume van de tv worden apart geregeld. OPTICAL Verbinding dvd-thuisbioscoop Hoofdtelefoonaansluiting [PD490-XN_ZF]BN68-03497E-02L04.indb 11 2011-03-07 오후 5:25:16Nederlands - 12 ¦ Een HDMI-kabel of een HDMI-naar-DVI-kabel of een D-subkabel gebruiken ✎Verbinding maken via de HDMI-kabel wordt mogelijk niet ondersteund, afhankelijk van de pc. Weergavemodi (D-Sub en HDMI-naar-DVI-invoer) • PS43D490: 1024 X 768 bij 60Hz • PS51D490: 1360 X 768 bij 60Hz Modus Resolutie Horizontale frequentie (kHz) Verticale frequentie (Hz) Pixelklokfrequentie (MHz) Synchronisatie- polariteit (H/V) PS43D490 PS51D490 IBM 640 x 350 720 x 400 31,469 31,469 70,086 70,087 25,175 28,322 +/- -/+ c c c c MAC 640 x 480 832 x 624 35,000 49,726 66,667 74,551 30,240 57,284 -/- -/- c c c c VESA DMT 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1360 x 768 31,469 37,861 37,500 37,879 48,077 46,875 48,363 56,476 60,023 47,712 59,940 72,809 75,000 60,317 72,188 75,000 60,004 70,069 75,029 60,015 25,175 31,500 31,500 40,000 50,000 49,500 65,000 75,000 78,750 85,500 -/- -/- -/- +/+ +/+ +/+ -/- -/- +/+ +/+ c c c c c c c c c c c c c c c c c c c ✎OPMERKING x Bij gebruik van de HDMI/DVI-kabelaansluiting moet u de HDMI IN 1(DVI)-aansluiting gebruiken. x De interlace-modus wordt niet ondersteund. x De tv werkt mogelijk niet normaal als een afwijkend videoformaat wordt geselecteerd. x Afzonderlijke modus en compositemodus worden ondersteund. SOG (Sync On Green) wordt niet ondersteund. PC OUT AUDIO OUT AUDIO OUT DVI OUT HDMI OUT pc-verbinding [PD490-XN_ZF]BN68-03497E-02L04.indb 12 2011-03-07 오후 5:25:17Nederlands - 13 Aansluiten op een aansluiting voor ALGEMENE INTERFACE De CI of CI+ CARD gebruiken Voor betaalde kanalen moet een CI of CI+ CARD zijn geplaatst. • Als u de ‘CI- of CI+-kaart’ niet plaatst, wordt bij sommige kanalen het bericht “Scrambled Signal” (Gecodeerd signaal) weergegeven. • De koppelingsgegevens met een telefoonnummer, de ID van de CI of CI+ CARD, de host-ID en andere informatie worden na circa 2-3 minuten weergegeven. Neem contact op met uw serviceprovider als er een foutbericht wordt weergegeven. • Wanneer de kanaalgegevens zijn geconfigureerd, wordt het bericht Update voltooid weergegeven. Hiermee wordt aangegeven dat de kanaallijst is bijgewerkt. ✎OPMERKING x U kunt een CI of CI+ CARD bij een lokale kabelaanbieder aanschaffen. x Wanneer u de CI of CI+ CARD wilt verwijderen, doet u dat door de kaart er met uw handen voorzichtig uit te trekken, want de kaart kan beschadigen als u deze laat vallen. x Plaats de CI of CI+ CARD in de richting die op de kaart staat gemarkeerd. x De plaats van de COMMON INTERFACE-aansluiting kan per model verschillen. x CI of CI+ CARD wordt in sommige landen en regio’s niet ondersteund. Controleer dit bij uw geautoriseerde verkoper. x Neem contact op met uw serviceprovider als u problemen ondervindt. x Plaats de CI of CI+ CARD die de huidige antenne-instellingen ondersteunt. Er wordt een vervormd beeld of helemaal geen beeld weergegeven. [PD490-XN_ZF]BN68-03497E-02L04.indb 13 2011-03-07 오후 5:25:17Nederlands - 14 De e-Manual weergeven Schermweergave Schakelen tussen de e-Manual en de bijbehorende menu’s. ✎Deze functie is niet beschikbaar sommige menu’s. Methode 1 Methode 2 1. Druk op de rode toets om Probeer nu te selecteren als u de bijbehorende menu’s wilt uitvoeren. 2. Om terug te keren naar het vorige scherm van de e-Manual drukt u op de toets E-MANUAL. 1. Druk op de toets ENTERE wanneer u het inhoudsgebied hebt geselecteerd. “Wilt u dit uitvoeren?” wordt weergegeven. Selecteer Ja en druk vervolgens op de toets ENTERE. Het schermvenster wordt weergegeven. 2. Om terug te keren naar het vorige scherm van de e-Manual drukt u op de toets E-MANUAL. E-MANUAL Hier kunt u de introductie en instructies over de functies van uw tv lezen. O MENUm → Ondersteuning → e-Manual → ENTERE ✎Om terug te keren naar de E-handleiding drukt u op de toets E-MANUAL op uw afstandsbediening. ✎U kunt de functie Probeer nu niet gebruiken als het menu niet is geactiveerd. Basisfuncties De vooraf ingestelde beeldmodus wijzigen De beeldinstellingen aanpassen De beeldgrootte wijzigen De beeldopties wijzigen De tv instellen met uw pc } Index E Enter e Afsl. Tv-scherm: geeft het beeld voor de huidige invoerbron weer. De categorie wijzigen. Druk op de toets l of r om de gewenste categorie te selecteren. De lijst met submenu’s wordt weergegeven. Druk op de toets ENTERE om het gewenste submenu weer te geven. Bedieningstoetsen: } Blauw (Index): het indexscherm weergeven. E Enter: een categorie of submenu selecteren. e Afsl.: de e-Manual sluiten. Probeer nu E-MANUAL ‰ De vooraf ingestelde beeldmodus wijzigen ■ Selecteer het beeldtype dat uw voorkeur heeft. Beeldmodus t • Dynamisch: geschikt voor een heldere kamer. • Standaard: geschikt voor een normale omgeving. • Natural voor LED-tv / Ontspannen voor plasma-tv : geschikt om vermoeide ogen tegen te gaan. • Film: geschikt om fi lms in een donkere kamer te kijken. • Amusement: geschikt voor fi lms en games. N Alleen beschikbaar in de modus PC. ‰ De vooraf ingestelde beeldmodus wijzigen O MENUm → Beeld → Beeldmodus → ENTERE ■ Beeldmodus Selecteer het beeldtype dat uw voorkeur heeft. N Als een invoerbron is ingesteld op PC, zijn voor de Beeldmodus alleen Standaard en Amusement beschikbaar. • Dynamisch: geschikt voor een heldere kamer. • Standaard: geschikt voor een normale omgeving. • Film: geschikt om fi lms in een donkere kamer te kijken. • Amusement: geschikt voor fi lms en games. Basisfuncties > De vooraf ingestelde beeldmodus wijzigen (5/10) a Probeer nu b Start { Zoom } Index L Pagina e Afsl. Beeld Beeldmodus : Standaard r Helderheid : 10 Contrast : 100 Helderheid : 45 Scherpte : 50 Kleur : 50 Tint (G/R) : G50/R50 Schermaanpassing [PD490-XN_ZF]BN68-03497E-02L04.indb 14 2011-03-07 오후 5:25:24Nederlands - 15 De inhoud weergeven De zoomfunctie gebruiken Wanneer u de e-Manual-instructies weergeeft, selecteert u gele toets om in te zoomen op het scherm. U kunt door het ingezoomde scherm schuiven met de toetsen u en d. ✎Om terug te keren naar het vorige menu drukt u op de toets RETURN. Een trefwoord zoeken via de indexpagina ✎Deze functie wordt mogelijk niet in alle talen ondersteund. 2. Als u een trefwoord wilt zoeken, drukt u op de blauwe toets om het scherm Index te openen. 2. Druk op de toets l of r om een beginletter te selecteren en druk vervolgens op de toets ENTERE. 3. Druk op de toets u of d om een trefwoord te selecteren die uw wilt weergeven, en druk vervolgens op de toets ENTERE. 4. U kunt het bijbehorende scherm met instructies voor de E-handleiding weergeven. ✎Als u het scherm Index wilt sluiten, drukt u op de toets RETURN. a Probeer nu b Start { Zoom } Index L Pagina e Afsl. Basisfuncties > De vooraf ingestelde beeldmodus wijzigen (5/10) Inhoudsgebied: als u een submenu selecteert, kunt u de bijbehorende inhoud weergeven. Druk op de toets l of r om naar de vorige of volgende pagina te gaan. Bedieningstoetsen: a Rood (Probeer nu): de bijbehorende menu's weergeven. b Groen (Start): het startscherm van de e-Manual weergeven. { Geel (Zoom): een beeld vergroot weergeven. } Blauw (Index): het indexscherm weergeven. L (Pagina): de vorige of volgende pagina weergeven. ‰ De vooraf ingestelde beeldmodus wijzigen O MENUm → Beeld → Beeldmodus → ENTERE ■ Beeldmodus Selecteer het beeldtype dat uw voorkeur heeft. N Als een invoerbron is ingesteld op PC, zijn voor de Beeldmodus alleen Standaard en Amusement beschikbaar. • Dynamisch: geschikt voor een heldere kamer. • Standaard: geschikt voor een normale omgeving. • Film: geschikt om films in een donkere kamer te kijken. • Amusement: geschikt voor films en games. R Terug ‰ De vooraf ingestelde beeldmodus wijzigen O MENUm → Beeld → Beeldmodus → ENTERE ■ Beeldmodus Selecteer het beeldtype dat uw voorkeur heeft. N Als een invoerbron is ingesteld op PC, zijn voor de Beeldmodus alleen Standaard en Amusement beschikbaar. • Dynamisch: geschikt voor een heldere kamer. • Standaard: geschikt voor een normale omgeving. • Film: geschikt om films in een donkere kamer te kijken. • Amusement: geschikt voor films en games. [PD490-XN_ZF]BN68-03497E-02L04.indb 15 2011-03-07 오후 5:25:25Nederlands - 16 De wandbevestiging plaatsen De wandbevestigingsset monteren Met de wandbevestigingsset (apart verkrijgbaar) kunt u de tv aan de muur bevestigen. Zie de instructies bij de onderdelen voor wandbevestiging als u wilt weten hoe u de wandbevestiging installeert. Neem contact op met een technicus voor hulp alvorens de wandbeugel te bevestigen. Samsung Electronics is niet verantwoordelijk voor schade aan het product of voor verwondingen die u zelf of anderen oplopen wanneer u besluit de tv zelfstandig te installeren. Specificaties voor de wandbevestigingsset (VESA) ✎De wandbevestigingsset is niet meegeleverd, maar wordt apart verkocht. Monteer de wandbevestiging op een stevige wand die loodrecht op de vloer staat. Wanneer de steun aan andere bouwmaterialen bevestigd moet worden, dient u contact op te nemen met de dichtstbijzijnde leverancier. Als u de wandbevestiging aan het plafond of een schuine wand monteert, kan de tv vallen en daarmee tot zwaar lichamelijk letsel leiden. ✎OPMERKING x In de onderstaande tabel vindt u de standaardafmetingen voor wandbevestigingssets. x Wanneer u onze wandbevestigingsset aanschaft, zijn een gedetailleerde installatiegids en alle vereiste montageonderdelen daarbij inbegrepen. x Gebruik geen schroeven die niet aan de standaard VESA-schroefspecificaties voldoen. x Gebruik geen schroeven die langer zijn dan de standaardafmeting of die niet aan de standaard VESA-schroefspecificaties voldoen. Schroeven die te lang zijn, kunnen de binnenkant van de televisie beschadigen. x Voor wandbevestigingen die niet voldoen aan de standaardspecificaties voor VESA-schroeven, kan de lengte van de schroeven afwijken, afhankelijk van de specificaties voor wandbevestiging. x Draai de schroeven niet te vast. Hierdoor kan het product beschadigd raken of vallen, wat kan leiden tot lichamelijk letsel. Samsung is voor dit soort ongevallen niet aansprakelijk. x Samsung is niet aansprakelijk voor productschade of lichamelijk letsel wanneer een niet-VESA of nietgespecificeerde wandbevestiging is gebruikt of wanneer de consument de installatie-instructies voor het product niet in acht heeft genomen. x Bevestig de televisie niet in een hoek van meer dan 15 graden. Productgroep formaat in cm VESA-spec. (A * B) Standaardschroef Aantal Plasma-tv 43~51 400 X 400 M8 4 59~64 600 X 400 ✎Draai de schroeven rond het gat los voordat u de muurbevestiging op de wand installeert. Monteer de wandbevestigingsset niet terwijl de tv is ingeschakeld. Dit kan resulteren in lichamelijk letsel door elektrische schokken. [PD490-XN_ZF]BN68-03497E-02L04.indb 16 2011-03-07 오후 5:25:25Nederlands - 17 Problemen oplossen Wanneer u vragen over deze televisie hebt, kunt u eerst deze lijst raadplegen. Als geen van de tips in deze lijst van toepassing zijn, gaat u naar ‘www.samsung.com’ en klikt u daar op Ondersteuning, of neemt u contact op met een van de callcenters die u op de achterkant van deze handleiding vindt. Probleem Oplossingen en uitleg De tv kan niet worden ingeschakeld. • Controleer of het netsnoer stevig op het stopcontact en op de tv is aangesloten. • Controleer of het stopcontact werkt. • Druk op de POWER-toets op de tv om te controleren of het probleem niet bij de afstandsbediening ligt. Als de tv wordt ingeschakeld, raadpleegt u ‘De afstandsbediening werkt niet’ hieronder. Er is geen beeld/video. • Controleer de kabelverbindingen (haal alle kabels die op de tv en externe apparaten zijn aangesloten, los en sluit ze vervolgens weer aan). • Stel de video-uitgang van het externe apparaat (aftakdoos, satellietdoos, dvd, Blu-ray enzovoort) in zodat deze overeenkomt met de aansluitingen van de tv-ingang. Als bijvoorbeeld de HDMIuitgang van een extern apparaat wordt gebruikt, moet deze op de HDMI-ingang van de tv worden aangesloten. • Controleer of de aangesloten apparaten zijn ingeschakeld. • Selecteer de juiste bron voor de tv door op de toets SOURCE op de afstandsbediening te drukken. De afstandsbediening werkt niet. • Vervang de batterijen van de afstandsbediening en plaats de batterijen met de polen (+/–) in de juiste richting. • Reinig het venster van de zender op de afstandsbediening. • Richt vanaf circa 1,5 tot 2 meter afstand de afstandsbediening direct naar de televisie. Met de afstandsbediening van de kabelbox/settopbox kan de tv niet worden in- of uitgeschakeld of kan het volume niet worden geregeld. • Programmeer de afstandsbediening voor de kabelbox/settopbox zodanig dat deze werkt voor de tv. Raadpleeg de gebruikershandleiding van uw kabelbox/settopbox voor de code voor de SAMSUNGtv. ✎Enkele van de bovenstaande afbeeldingen en functies zijn alleen voor bepaalde modellen verkrijgbaar. ✎U kunt uw tv in optimale toestand houden door de nieuwste firmware op de website (samsung.com → Ondersteuning → Downloads) via USB te installeren. Licentie-informatie Lijst met functies Excellent Digital Interface & Networking: Met een ingebouwde digitale HD-tuner kunnen HD-uitzendingen zonder abonnement worden bekeken zonder kabelbox/STB-satellietontvanger (settopbox). 3D Met deze fantastische nieuwe functie kunt u 3D-inhoud bekijken. Anynet+ (HDMI-CEC) Hiermee kunt u alle aangesloten Samsung-apparaten die Anynet+ ondersteunen met de afstandsbediening van de Samsung-tv bedienen. Mijn downloads Hiermee kunt u muziekbestanden en films bekijken die op een USB-apparaat zijn opgeslagen. [PD490-XN_ZF]BN68-03497E-02L04.indb 17 2011-03-07 오후 5:25:26Nederlands - 18 De tv vastzetten aan de wand Let op: als u duwt of trekt aan de tv of op de tv klimt, kan deze vallen. Zie er met name op toe dat uw kinderen niet aan de tv gaan hangen of deze uit balans brengen. De tv kan dan omvallen, wat verwondingen kan veroorzaken of zelfs fatale gevolgen kan hebben. Neem alle voorzorgsmaatregelen die in de bijgesloten veiligheidsfolder worden genoemd. Om veiligheidsredenen is het raadzaam de antivalvoorziening te installeren om de stabiliteit van het toestel te verhogen. Voorkomen dat de tv valt 1. Plaats de schroeven in de beugels en bevestig deze stevig aan de wand. Controleer of de schroeven stevig in de wand zijn gedraaid. ✎Afhankelijk van het wandtype hebt u mogelijk aanvullend materiaal nodig om het geheel te verankeren. ✎De benodigde beugels, schroeven en draad worden niet meegeleverd. Deze moeten apart worden aangeschaft. 2. Verwijder de schroeven in het midden aan de achterkant van de tv, steek de schroeven door de beugels en draai de schroeven weer vast in de tv. ✎Het is mogelijk dat de schroeven niet bij het product worden meegeleverd. In dat geval moet u schroeven met de volgende specificaties aanschaffen. 3. Verbind de beugels die aan de tv zijn bevestigd met een sterke draad aan de beugels die aan de muur zijn bevestigd en knoop de draad stevig vast. ✎OPMERKING x Plaats de tv dicht bij de muur zodat deze niet achterover kan vallen. x Het is veilig om de draad zodanig aan te brengen dat de beugels die aan de muur zijn bevestigd zich boven de beugels op de tv of op gelijke hoogte daarmee bevinden. x Haal de draad los voordat u de tv verplaatst. 4. Controleer of alle bevestigingen goed zijn aangebracht. Controleer de bevestigingspunten regelmatig op tekenen van moeheid of verzwakking. Neem in geval van twijfel over de veiligheid van de bevestiging contact op met een professionele installateur. Opslag en onderhoud ✎Als u stickers op het tv-scherm hebt geplakt, kunnen er resten achterblijven als u de sticker weghaalt. Reinig het tv-scherm voordat u tv gaat kijken. Spuit geen water of reinigingsmiddel rechtstreeks op het product. Vloeistoffen die in het product terechtkomen kunnen een storing, brand of elektrische schok veroorzaken. Reinig het product met een zachte doek die licht met water is bevochtigd. Muur [PD490-XN_ZF]BN68-03497E-02L04.indb 18 2011-03-07 오후 5:25:26Nederlands - 19 Specificaties Omgevingsvereisten Bedrijfstemperatuur Gebruiksvochtigheid Opslagtemperatuur Opslagvochtigheid 10°C tot 40°C (50°F tot 104°F) 10% tot 80%, niet-condenserend -20°C tot 45°C (-4°F tot 113°F) 5% tot 95%, niet-condenserend Tv-systeem Analoog: B/G, D/K, L, I (afhankelijk van de landkeuze) Digitaal: DVB-T/DVB-C Kleuren-/videosysteem Analoog: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60 Digitaal: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0 Geluidssysteem BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC. HDMI IN Video: 1080 24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i Audio: 2-kan. lineair PCM 32/44.1/48 kHz, 16/20/24 bits. Draaivoet (links/rechts) -20˚ ~ 20˚ Modelnaam PS43D490 PS51D490 Schermformaat 43 inch (109 cm) 51 inch (128 cm) Geluid (Uitgang) 10 W x 2 Afmetingen (BxHxD) Behuizing Met voet 1011,8 X 56,0 X 622,4 mm 1011,8 X 305,0 X 698,7 mm 1187,8 X 56,0 X 706,6 mm 1187,8 X 305,0 X 782,9 mm Gewicht Zonder voet Met voet 16,0 kg 20,3 kg 22,5 kg 26,8 kg Beeldresolutie 1024 X 768 1360 X 768 ✎Vormgeving en specificaties kunnen zonder kennisgeving worden gewijzigd. ✎Zie voor informatie over de stroomvoorziening en het energieverbruik het etiket op het product. ✎Hierbij verklaart Samsung dat het toestel PDP TV in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. [PD490-XN_ZF]BN68-03497E-02L04.indb 19 2011-03-07 오후 5:25:27This page is intentionally left blank. [PD490-XN_ZF]BN68-03497E-02L04.indb 20 2011-03-07 오후 5:25:27 E-MANUAL Imaginez les possibilités Merci d'avoir acheté ce produit Samsung. Afin de bénéficier d'un service plus complet, veuillez enregistrer votre produit à l'adresse www.samsung.com/register Modèle ________ N° de série____________Contenu Canal • Utilisation du bouton INFO (Guide Now & Next) 3 • Utilisation du menu Canal 4 • Utilisation des chaînes 14 • Mémorisation des chaînes 20 • Utilisation des chaînes (Satellite) 27 • Mémorisation de chaînes (Satellite) 32 • Autres fonctionnalités 46 Fonctions de base • Changement du Mode Image prédéfini 48 • Réglage des paramètres de l’image 49 • Changement de la taille de l’image 50 • Modification des options d’image 54 • Configuration du téléviseur avec le PC 61 • Changement du mode Son prédéfini 65 • Réglage des paramètres sonores 66 Préférence • Connexion à un réseau câblé 76 • Configuration du réseau 80 • Connexion à un réseau sans fil 87 • Réglage de l'heure 111 • Verrouillage des programmes 119 • Solutions économiques 122 • Incrustation d'image (PIP) 124 • Autres fonctionnalités 127 • Menu Assistance 138 Fonctions avancées • Utilisation de la fonction 3D 146 • A propos d’AllShare™ 158 • Configuration de la fonction AllShare™ 160 • Configuration d’Anynet+ 164 • Anynet+ 166 • Basculement entre des appareils Anynet+ 171 • Ecoute via un récepteur 173 • Résolution des problèmes Anynet+ 175 • Utilisation de Mon contenu 178 • Connexion d’un périphérique USB 179 • Affichage 184 • Vidéos 185 • Musique 191 • Photos 194 • Mon contenu - Fonctions supplémentaires 196 Informations supplémentaires • Fonction télétexte 200 • Résolution des problèmes 205 • Fente INTERFACE COMMUNE pour les connexions 216 • Verrou antivol Kensington 219 • Licence 221▶ Français ❑ Utilisation du bouton INFO (Guide Now & Next) L’affichage identifie la chaîne en cours et l’état de certains paramètres audio et vidéo. Le Guide Now & Next affiche des informations quotidiennes sur les programmes de télévision en fonction de l’heure de diffusion. ● Faites défiler à l’aide des boutons l, r pour afficher des informations sur le programme de votre choix, tout en regardant la chaîne actuelle. ● Faites défiler à l’aide des boutons u, d pour afficher des informations sur d’autres chaînes. Si vous souhaitez accéder à la chaîne sélectionnée, appuyez sur le bouton ENTERE. Canal , Life On Venus Avenue Non classé Aucune information détaillée. a Information 18:11 Jeu 6 Jan 18:00 ~ 6:00 abc1 TV TNT 15◀ ▶ Français ❑ Utilisation du menu Canal O MENUm → Assistance → Accueil contenu → ENTERE Appuyez sur le bouton CONTENT pour sélectionner Regarder TV, puis sélectionner le menu que vous souhaitez utiliser. Chaque écran s’affiche. ● L’image affichée peut varier en fonction du modèle. Regarder TV Guide Gestionnaire prog. Liste des chaînes Gestion chaînes Mon contenu Source◀ ▶ Français ■ Guide Les informations du Guide électronique des programmes (EPG) sont fournies par les diffuseurs. Les programmes planifiés fournis par les diffuseurs vous permettent de planifier les émissions que vous souhaitez regarder, de telle sorte que le téléviseur change automatiquement de chaîne à l’heure indiquée. Des entrées de programmes peuvent être vides ou ne pas être à jour en raison de l’état d’une chaîne.◀ ▶ Français Utilisation de la fonction Channel View (Vue chaînes) a Rouge (Gest. prog): Affiche le Gestionnaire prog.. b Vert (-24 heures): Affiche la liste des programmes qui seront diffusés dans les 24 heures. { Jaune (+24 heures): Affiche la liste des programmes qui seront diffusés dans plus de 24 heures. ● L’image affichée peut varier en fonction du modèle. a Gest. prog { +24 heures } Mode CH ; Information k Page E Regarder TV TNT 05.1 Globo HD TELA QUENTE (HD) 10:05 pm - 12:10 pm 10 DESVENTURAS EM SERIE (HD) Auj. Guide 16:02 Mar 19 Juil Vue chaînes - Toutes les chaînes Programmes resume at 06:00 Home and... Aucune information. QVC Selection Aucune information. 04 Globo HD 05 DiscoveryH&L 06 TV GloboSD 07 price-drop.tv 08 QVC 09 R4DTT Tine Team Aucune information. Fiv... Dark Angel American Chopper 16:00 16:30 17:00 17:30◀ ▶ Français } Bleu (Mode CH): Permet de sélectionner le type des chaînes à afficher dans la fenêtre Channel View. ; Information: Affiche des détails sur le programme sélectionné. k Page: Permet de passer à la page suivante ou précédente. ERegarder: Si vous sélectionnez le programme en cours, vous pouvez le regarder. / si vous sélectionnez le programme suivant, vous pouvez le réserver.◀ ▶ Français ■ Gestionnaire prog. O CONTENT → Gestionnaire prog. → ENTERE Vous pouvez voir, modifier ou supprimer une chaîne que vous avez réservée. Utilisation de la fonction Rappel programme Vous pouvez programmer l’affichage automatique d’une chaîne déterminée à l’heure prévue. Avant d’utiliser cette fonction, vous devez régler l’heure. 1. Appuyez sur le bouton ENTERE pour sélectionner Gestionnaire prog.. 2. Appuyez sur le bouton ENTERE pour ajouter un programme à planifier manuellement. L’écran Rappel programme s’affiche.◀ ▶ Français 3. Appuyez sur les boutons l / r / u / d pour définir Antenne, Canal, Répétition, Date ou Heure démarrage. ● Antenne: Sélectionnez la source d’antenne de votre choix. ● Canal: sélectionnez la chaîne de votre choix. ● Répétition: Sélectionnez Une fois, Manuel, Sam~Dim, Lun~Ven ou Quotid. pour définir l’option suivant vos besoins. Si vous sélectionnez Manuel, vous pouvez définir le jour de votre choix. N Le symbole c indique que la date est sélectionnée. ● Date: permet de définir la date de votre choix. N Cette option est disponible lorsque vous sélectionnez Une fois sous Répétition.◀ ▶ Français ● Heure démarrage: Vous pouvez définir l’heure de début de votre choix. N Appuyez sur le bouton INFO pour accéder aux Infos détaillées. L’écran Infos détaillées vous offre la possibilité de modifier ou d’annuler des informations réservées. ● Annuler progr.: Permet d’annuler une émission que vous avez réservée. ● Editer: Permet de modifier une émission que vous avez réservée. ● Retour: Permet de revenir à l’écran précédent.◀ ▶ Français ■ Liste des chaînes Vous pouvez afficher toutes les chaînes recherchées. O Lorsque vous appuyez sur la touche CH LIST de la télécommande, l’écran Liste des chaînes s’affiche. O Utilisation des boutons de fonctionnement dans la Liste des chaînes. ● a Rouge (Antenne): Sélectionnez la source d’antenne de votre choix. N l’option peut varier en fonction des modèles. ● { Jaune (Vue progr. / Vue chaînes): Affiche le programme lorsque la chaîne numérique est sélectionnée. Revient à l’affichage des chaînes. ● L’image affichée peut varier en fonction du modèle. Liste des chaînes Tous Hertzien a Antenne { Vue progr. L Mode CH E Regarder k Page 6 M6 9 W9 W9 MUSIC 11 NT1 800 24H TVE 801 arte 802 ATV 803 BBC 804 BBC 805 BBC◀ ▶ Français ● l r Mode CH / Canal: permet d’accéder au type de chaînes que vous souhaitez afficher sur l’écran Liste des chaînes / Permet de changer de chaîne. N l’option peut varier en fonction du pays. ● ERegarder / Information: permet de regarder la chaîne sélectionnée / affiche des détails sur le programme sélectionné. ● k Page: permet de passer à la page suivante ou précédente.◀ ▶ Français Utilisation de la fonction de rappel de programme dans la liste des chaînes (chaînes numériques uniquement) Lorsque vous définissez l’option Rappel programme dans Liste des chaînes, vous pouvez uniquement définir le programme sur Vue progr.. 1. Appuyez sur le bouton CH LIST, puis sélectionnez la chaîne numérique de votre choix. 2. Appuyez sur le bouton { (Vue progr.). 3. Appuyez sur les boutons u / d pour sélectionner le programme de votre choix, puis appuyez sur ENTEREInformation. 4. Sélectionnez Rappel programme, et appuyez sur le bouton ENTERE lorsque vous avez terminé. N Pour annuler la fonction Rappel programme, suivez les étapes 1 à 3. Sélectionnez Annuler progr..◀ ▶ Français ❑ Utilisation des chaînes ■ Gestion chaînes O CONTENT → Gestion chaînes→ ENTERE Modifiez la chaîne favorite et sélectionnez ensuite Supprimer, Désélectionner tout ou Sélectionner tout. Vous pouvez modifier le nom de la chaîne uniquement pour les chaînes analogiques. ● L’image affi chée peut varier en fonction du modèle. Gestion chaînes Tous Elément sélectionné: 0 Numéro chaîne Page 2/3 Hertzien a Antenne } Trier par k Page E Sélectionner T Outils R Retour◀ ▶ Français ● ( ) Chaînes: Sélectionnez une chaîne dans Tous, TV, Radio, Donn/autre, et Analogique.. Modifiez les paramètres de l’antenne ou des chaînes à l’aide des menus situés dans le coin supérieur droit de l’écran. ● ( ) Favoris 1 sur 5: Affiche toutes les chaînes favorites.. N Utilisation des boutons de couleur avec la fonction Gestion chaînes. ● a Rouge (Antenne): Sélectionnez la source d’antenne de votre choix. ● } Bleu (Trier par): permet de changer l’ordre des chaînes classées par nom ou par numéro.◀ ▶ Français Icônes d’affichage de l’état des chaînes Icône Opérations a Chaîne analogique. c Chaîne sélectionnée. F Chaîne définie comme favorite. Menu d’options Gestion chaînes t Réglez chaque chaîne à l’aide des options du menu Gestion chaînes (Regarder, Ajouter aux favoris / Modif. favoris, Verr / Déverr, Modif. nom de chaîne, Modif. num. chaîne, Supprimer, Sélectionner tout / Désélectionner tout). Les options du menu peuvent varier en fonction de l’état de la chaîne.◀ ▶ Français 1. Sélectionnez une chaîne et appuyez ensuite sur le bouton TOOLS. 2. Sélectionnez une fonction et modifiez ses réglages. ● Regarder: permet de regarder la chaîne sélectionnée. ● Ajouter aux favoris / Modif. favoris: permet de définir comme favorites les chaînes que vous regardez souvent / Permet d’ajouter ou de retirer les chaînes sélectionnées de Favoris 1 sur 5. 1. Sélectionnez Ajouter aux favoris / Modif. favoris, puis appuyez sur le bouton ENTERE. N Si la chaîne a déjà été ajoutée comme favorite, l’option Modif. favoris s’affiche.◀ ▶ Français 2. Appuyez sur le bouton ENTERE pour sélectionner Favoris 1 sur 5 et appuyez ensuite sur OK. N Vous pouvez affecter une chaîne Favoris qui sera incluse dans la liste Favoris 1 sur 5. ● Verr / Déverr: vous pouvez verrouiller une chaîne afin qu’elle ne puisse pas être sélectionnée ni visualisée. N Cette fonction n’est disponible que si l’option Verr. chaîne est définie sur Activé.◀ ▶ Français ● Modifi. nom de chaîne (chaînes analogiques uniquement): vous permet d’attribuer votre propre nom à la chaîne. N Cette fonction n’est pas prise en charge dans toutes les régions. ● Modif. num. chaîne: vous pouvez modifier le numéro en appuyant sur les touches numériques souhaitées. N Cette fonction n’est pas prise en charge dans toutes les régions. ● Supprimer: vous pouvez supprimer une chaîne afin d’afficher celles de votre choix. ● Sélectionner tout: permet de sélectionner toutes les chaînes de la liste des chaînes.◀ ▶ Français ❑ Mémorisation des chaînes N MENUm → Canal → ENTERE ■ N Antenne l’option peut varier en fonction du pays. t Avant que votre téléviseur ne puisse commencer à mémoriser les chaînes disponibles, vous devez spécifier le type de la source du signal reliée au téléviseur.◀ ▶ Français ■ Recherche automatique N Il est possible que les numéros de programme attribués automatiquement ne correspondent pas aux numéros de programme souhaités ou réels. Si une chaîne est verrouillée par la fonction Verr. chaîne, la fenêtre de saisie du code PIN s’affiche.◀ ▶ Français ● Antennes: sélectionnez la source d’antenne à mémoriser. l’option peut varier en fonction du pays. ● Numér. et Anal. / Numérique / Analogique: permet de sélectionner la source des chaînes à mémoriser. Lors de la sélection de Câble → Numér. et Anal. ou Numérique: fournit une valeur à rechercher pour les chaînes câblées. ● Mode de rech. (Complet / Réseau / Rapide): recherche toutes les chaînes avec des stations de diffusion actives et les enregistre dans la mémoire du téléviseur. N Si vous sélectionnez Rapide, vous pouvez définir Réseau, ID réseau, Fréquence, Modulation et Taux de symbole manuellement en appuyant sur le bouton de la télécommande. ● Réseau (Auto. / Manuel): sélectionnez le mode de réglage ID réseau Auto. ou Manuel.◀ ▶ Français ● ID réseau: si Réseau est défini sur Manuel, vous pouvez configurer un ID réseau à l’aide des boutons numériques. ● Fréquence: affiche la fréquence correspondant à la chaîne (varie d’un pays à l’autre). ● Modulation: affiche les valeurs de modulation disponibles. ● Taux de symbole: affiche les taux de symboles disponibles. ■ Option de rech. de câble (en fonction du pays) Définit des options de recherche supplémentaires telles que la fréquence et le débit de symboles pour une recherche sur réseau câblé.◀ ▶ Français ■ Recherche manuelle Recherche manuellement une chaîne et la mémorise dans le téléviseur. N Si une chaîne est verrouillée par la fonction Verr. chaîne, la fenêtre de saisie du code PIN s’affiche. ● Réglage des chaînes numériques: recherche une chaîne numérique. 1. Appuyez sur le bouton a pour sélectionner Nouveau. N Lorsque vous sélectionnez Antenne → Hertzien: Canal, Fréquence, Bande passante N Lorsque vous sélectionnez Antenne → Câble: Fréquence, Modulation, Taux de symbole◀ ▶ Français 2. Appuyez sur le bouton d pour sélectionner Rech.. Au terme de la recherche, les chaînes de la liste sont mises à jour. ● Réglage des chaînes analogiques: recherche une chaîne analogique. 1. Appuyez sur le bouton a pour sélectionner Nouveau. 2. Définissez les options Programme, Système de Couleur, Système Sonore, Canal et Rech.. 3. Appuyez sur le bouton d pour sélectionner Mémoriser. Au terme de la recherche, les chaînes de la liste sont mises à jour.◀ ▶ Français N Mode Canal ● P (Mode Programme): à la fin du réglage, des numéros de position compris entre P0 et P99 sont attribués aux stations de radiodiffusion de votre région. Dans ce mode, vous pouvez sélectionner une chaîne en saisissant son numéro de position. ● C (Mode canal Hertzien) / S (Mode canal Câble): ces deux modes vous permettent de sélectionner une chaîne en entrant le numéro attribué à chaque chaîne câblée ou station de radiodiffusion hertzienne.◀ ▶ Français ❑ Utilisation des chaînes (Satellite) pour PDP 570 ■ Gestion chaînes O CONTENT → Gestion chaînes→ ENTERE Ajoutez ou modifiez les chaînes favorites et définissez les chaînes sur Supprimer, Désélectionner tout ou Sélectionner tout. Vous pouvez modifier le nom de la chaîne uniquement pour les chaînes analogiques. ● L’image affi chée peut varier en fonction du modèle. Gestion chaînes Tous Elément sélectionné: 0 Numéro chaîne Page 2/3 Hertzien a Antenne } Trier par k Page E Sélectionner T Outils R Retour◀ ▶ Français ● ( ) Chaînes: Sélectionnez une chaîne dans Tous, TV, Radio, Donn/autre et Analogique. Modifiez les paramètres de l’antenne ou des chaînes à l’aide des menus situés dans le coin supérieur droit de l’écran. ● ( ) Favoris 1 sur 5: Affiche les chaînes favorites . N Utilisation des boutons de couleur avec la fonction Gestion chaînes. ● a Rouge (Antenne): Sélectionnez la source d’antenne de votre choix. ● } Bleu (Trier par): Permet de changer l’ordre des chaînes classées par numéro ou par nom.◀ ▶ Français Icônes d’affichage de l’état des chaînes Icône Opérations a Chaîne analogique. c Chaîne sélectionnée. F Chaîne définie comme favorite. Menu d’options Gestion chaînes t Réglez chaque chaîne à l’aide des options du menu Gestion chaînes (Regarder, Ajouter aux favoris / Modif. favoris, Verr / Déverr, Modif. nom de chaîne, Modif. num. chaîne, Supprimer, Sélectionner tout / Désélectionner tout). Les options du menu peuvent varier en fonction de l’état de la chaîne.◀ ▶ Français 1. Sélectionnez une chaîne et appuyez ensuite sur le bouton TOOLS. 2. Sélectionnez une fonction et modifiez ses réglages. ● Regarder: permet de regarder la chaîne sélectionnée. ● Ajouter aux favoris / Modif. favoris: permet de définir comme favorites les chaînes que vous regardez souvent. 1. Sélectionnez Ajouter aux favoris / Modif. favoris, puis appuyez sur le bouton ENTERE. N Si la chaîne a déjà été ajoutée comme favorite, l’option Modif. favoris s’affiche.◀ ▶ Français 2. Appuyez sur le bouton ENTERE pour sélectionner Favoris 1 sur 5, puis appuyez sur le bouton OK. N Vous pouvez affecter une chaîne favorite dans Favoris entre Favoris 1 sur 5. ● Supprimer: vous pouvez supprimer une chaîne afin d’afficher celles de votre choix. ● Sélectionner tout: permet de sélectionner toutes les chaînes de la liste des chaînes.◀ ▶ Français ❑ Mémorisation de chaînes (Satellite) N MENUm → Canal → ENTERE ■ Antennet N l’option peut varier en fonction du pays. Avant que votre téléviseur ne puisse commencer à mémoriser les chaînes disponibles, vous devez spécifier le type de la source du signal reliée au téléviseur.◀ ▶ Français ■ Recherche automatique ● Recherche automatique Recherche automatiquement une chaîne et la mémorise dans le téléviseur. N Il est possible que les numéros de programme attribués automatiquement ne correspondent pas aux numéros de programme souhaités ou réels. Si une chaîne est verrouillée par la fonction Verr. chaîne, la fenêtre de saisie du code PIN s’affiche. ● Antennes: sélectionnez la source d’antenne à mémoriser. l’option peut varier en fonction du pays.◀ ▶ Français ● Numér. et Anal. / Numérique / Analogique: permet de sélectionner la source des chaînes à mémoriser. Lors de la sélection de Câble → Numér. et Anal. ou Numérique : fournit une valeur à rechercher pour les chaînes câblées. ● Mode de rech. (Complet / Réseau / Rapide): recherche toutes les chaînes avec des stations de diffusion actives et les enregistre dans la mémoire du téléviseur. N Si vous sélectionnez Rapide, vous pouvez définir Réseau, ID réseau, Fréquence, Modulation et Taux de symbole manuellement en appuyant sur le bouton de la télécommande. ● Réseau (Auto / Manuel): sélectionne le mode de réglage ID réseau Auto. ou Manuel. ● ID réseau: si Réseau est défini sur Manuel, vous pouvez configurer un ID réseau à l’aide des boutons numériques.◀ ▶ Français ● Fréquence: affiche la fréquence correspondant à la chaîne (varie d’un pays à l’autre). ● Modulation: affiche les valeurs de modulation disponibles. ● Taux de symbole: affiche les taux de symboles disponibles. ■ Option de rech. de câble (En fonction du pays) Définit des options de recherche supplémentaires, telles que la fréquence et le taux de symbole pour une recherche sur un réseau câblé.◀ ▶ Français – Fréq. de départ / Fréquence de fin.: définit la fréquence de début ou de fin (varie d’un pays à l’autre). – Taux de symbole: affiche les taux de symboles disponibles. – Modulation: affiche les valeurs de modulation disponibles. ● Mémorisation auto veille (Arrêt / Marche) pour l’Italie : Permet ou rend infirme l’auto-air pendant que la TV est dans le mode de secours. ● Réveil (1 hour later / 2 hours later / 00:00 / 02:00 / 12:00 / 14:00) pour l’Italie: Sélectionne le programmateur pour la mise sous tension du téléviseur et le balayage automatique des chaînes.◀ ▶ Français ■ Recherche manuelle Recherche manuellement une chaîne et la mémorise dans le téléviseur. N Si une chaîne est verrouillée par la fonction Verr. chaîne, la fenêtre de saisie du code PIN s’affiche. ● Transpondeur: permet de sélectionner le transpondeur à l’aide des boutons haut/bas. ● Mode Recherche: permet de mémoriser soit les chaînes gratuites, soit toutes les chaînes. ● Rech. réseau (Désactiver / Activer): recherche d’un réseau à l’aide des boutons haut/bas.◀ ▶ Français ● Qualité du signal: permet d’afficher l’état actuel du signal de diffusion. N Les informations concernant un satellite et son transpondeur sont sujettes à des modifications selon les conditions de diffusion. N Une fois le paramétrage terminé, allez sur Rechercher et appuyez sur le bouton ENTERE. La recherche des chaînes commence.◀ ▶ Français ■ Système satellite L’écran de saisie du code PIN apparaît. Entrez votre code PIN à quatre chiffres. La fonction système satellite est disponible lorsque l’option Antenne est définie sur Satellite. Avant d’exécuter la fonction Mémorisation Auto, définissez système satellite. La recherche des chaînes est alors exécutée normalement. ● Sélection du satellite: vous pouvez choisir les satellites pour ce téléviseur. ● Alimentation du LNB (Arrêt / Activé) : permet d’activer ou de désactiver l’alimentation du LNB.◀ ▶ Français ● Réglages LNB: configure l’équipement extérieur. – Transpondeur: permet de sélectionner le transpondeur à l’aide des boutons haut / bas. – Mode DiSEqC: permet de sélectionner le mode DiSEqC pour le LNB sélectionné. – Osc. LNB plus bas: permet de régler les oscillateurs LNB sur une fréquence inférieure. – Osc. LNB plus hauts: permet de régler les oscillateurs LNB sur une fréquence supérieure. – Tone 22 kHz (Arrêt / Activé / Auto.): permet de sélectionner la tonalité 22 KHz en fonction du type de LNB. Dans le cas d’un LNB universel, elle doit être définie sur Auto. – Qualité du signal: permet d’afficher l’état actuel du signal de diffusion.◀ ▶ Français ● Param. SatCR/Unicable: Configurez l’installation à câble unique. N Cette fonction n’est pas prise en charge dans toutes les régions. – SatCR/Unicable: Activez ou désactivez la prise en charge de l’installation à câble unique. – Numéro de logement: Sélectionnez le numéro de logement de l’utilisateur SatCR pour ce récepteur. – Fréquence du logement: Entrez la fréquence appropriée pour recevoir le signal de SatCR. – Détec. fréq. logement: Détectez automatiquement la fréquence du signal pour le numéro de logement sélectionné. – Vérif. fréq. logement: Vérifiez que la fréquence indiquée correspond au logement sélectionné.◀ ▶ Français ● Réglages du positionneur: Configure le positionneur de l’antenne. Positionneur (Activé / Arrêt): Permet d’activer ou de désactiver le contrôle du positionneur. Type de posit. (USALS / DiSEqC 1.2): Permet de définir le type de positionneur entre DiSEqC 1.2 et USALS (Universal Satellite Automatic Location System). – Longitude: Définit la longitude de mon emplacement. – Latitude: Définit la latitude de mon emplacement. – Réglages longitude satellite: Règle la longitude des satellites définis par l’utilisateur.◀ ▶ Français Mode Utilisateur: Permet de définir la position de l’antenne satellite en fonction de chaque satellite. Si vous mémorisez la position actuelle de l’antenne satellite en fonction d’un satellite donné, lorsque le signal de ce satellite est requis, l’antenne satellite peut se placer dans la position prédéfinie. – Satellite: Permet de sélectionner le satellite pour lequel la position doit être définie. – Transpondeur: Permet de sélectionner un transpondeur dans la liste pour la réception du signal. – Mode Déplacement: Permet de choisir entre le mode de déplacement individuel ou continu. – Taille des pas: Permet de régler les degrés de la taille des pas pour la rotation de l’antenne. L’option Taille des pas est disponible lorsque Mode Déplacement est défini sur Pas.◀ ▶ Français – Aller à une pos. enregistrée: Permet de faire pivoter l’antenne jusqu’à la position de satellite enregistrée. – Position de l’antenne: Permet d’ajuster et de mémoriser la position de l’antenne pour le satellite sélectionné. – Mémoriser la position actuelle: Permet de mémoriser la position actuelle comme limite de positionneur sélectionnée. – Qualité du signal: Permet d’afficher l’état actuel du signal de diffusion.◀ ▶ Français Mode Installateur: Permet de fixer des limites à l’étendue des mouvements de l’antenne satellite ou de réinitialiser la position. En règle générale, le guide d’installation utilise cette fonction. – Position limite (Est / Ouest): Permet de sélectionner la direction de la limite du positionneur. – Position de l’antenne: Permet d’ajuster et d’enregistrer la position de l’antenne pour le satellite sélectionné. – Mémoriser la position actuelle: Permet de mémoriser la position actuelle comme Limite du positionneur sélectionnée. – Réinitialiser la position: Déplace l’antenne jusqu’à la position de référence. – Redéfinir limite positionneur: Autorise l’antenne à effectuer un arc complet. ● Réinit. tous les paramètres (OK / Annuler): Toutes les valeurs initiales des paramètres du satellite seront réinitialisées.◀ ▶ Français ❑ Autres fonctionnalités O MENUm → Canal → ENTERE ■ Réglage fin (Chaînes analogiques uniquement) Si la réception est nette, vous n’avez pas besoin d’effectuer un réglage fin du canal, car cette opération s’effectue automatiquement pendant la recherche et la mémorisation. Si le signal est faible ou déformé, vous pouvez effectuer manuellement un réglage fin du canal. Faites défiler vers la gauche ou vers la droite jusqu’à ce que l’image soit nette.◀ ▶ Français N Les paramètres s’appliquent à la chaîne regardée actuellement. N Les chaînes réglées et mémorisées sont repérées par un astérisque (*) placé à droite de leur numéro dans la bannière des chaînes. N Pour réinitialiser le réglage précis, sélectionnez Réinit.. ■ Transfert de liste des chaînes L’écran de saisie du code PIN apparaît. Entrez votre code PIN à quatre chiffres. Importe ou exporte la carte des chaînes. Vous devez connecter un périphérique de stockage USB pour utiliser cette fonction. ● Importer depuis le périphérique USB: Permet d’importer une liste de chaînes depuis un périphérique USB. ● Exporter vers le périphérique USB: Permet d’exporter la liste des chaînes vers le périphérique USB. Cette fonction est disponible lorsqu’un périphérique USB est connecté.◀ ▶ Français ❑ Changement du Mode Image prédéfini O MENUm → Image → Mode Image → ENTERE ■ Mode Image Sélectionnez le type d’image que vous préférez. N Lorsqu’une source d’entrée est définie sur PC, seules les options Standard et Loisirs sont disponibles pour le Mode Image. ● Dynamique: adapté à un environnement lumineux. ● Standard: adapté à un environnement normal. ● Cinéma: adapté au visionnage de films dans une pièce sombre. ● Loisirs: adapté au visionnage de films et de jeux vidéo. N cette option n’est disponible que si vous connectez un PC. Fonctions de base◀ ▶ Français ❑ Réglage des paramètres de l’image O MENUm → Image → ENTERE ■ Lum. Cellules / Contraste / Luminosité / Netteté / Couleur / Teinte (V/R) Votre téléviseur dispose de plusieurs options de réglage pour le contrôle de la qualité d’image. N Lorsque vous modifiez les paramètres Lum. Cellules, Contraste, Luminosité, Netteté, Couleur ou Teinte (V/R) l’affichage écran change en conséquence. N En mode PC, vous pouvez uniquement apporter des modifications aux options Lum. Cellules, Contraste, Luminosité et Netteté. N Les paramètres peuvent être définis et mémorisés pour chaque appareil externe connecté au téléviseur. N La réduction de la luminosité de l’image se traduit par une consommation d’énergie moindre.◀ ▶ Français ❑ Changement de la taille de l’image O MENUm → Image → Réglage de l’écran → ENTERE ■ Réglage de l’écran ● Format de l’image: il se peut que votre décodeur câble / récepteur satellite dispose de son propre jeu de formats d’écran. Il est toutefois vivement conseillé d’utiliser le mode 16:9. 16:9 Auto: règle automatiquement la taille de l’image sur le format 16:9. 16:9: règle l’image en mode large, c’est-à-dire en 16:9. Zoom large: Affiche les images au format 4/3 au 16/9 en rognant haut et bas d’image. N Règle la Position à l’aide des boutons u, d.◀ ▶ Français Zoom: Etire l’image au format 16:9 verticalement. N Règle la Zoom et Position à l’aide des boutons u et d. 4:3: Met l’image au format 4:3. N Ne regardez pas un film au format 4:3 pendant une période prolongée. Les traces de bordures situées sur la gauche, sur la droite et au centre de l’écran peuvent donner lieu au phénomène de rémanence (brûlure d’écran) non couvert par la garantie. Adapter à l’écran: Affiche l’intégralité de l’image sans coupure lors de l’entrée de signaux HDMI (720p / 1080i / 1080p) ou Composant (1080i / 1080p).◀ ▶ Français N Remarque ● Les options de format de l’image peuvent varier en fonction de la source d’entrée. ● Les options disponibles peuvent varier en fonction du mode sélectionné. ● En mode PC, seuls les modes 16:9 et 4:3 peuvent être réglés. ● Les paramètres peuvent être définis et mémorisés pour chaque appareil externe connecté à une entrée du téléviseur. ● Si vous utilisez la fonction Adapter à écran avec l’entrée HDMI 720p, une ligne sera coupée en haut, en bas, à gauche et à droite, comme c’est le cas avec la fonction Overscan.◀ ▶ Français ● 4:3 Taille écran (16:9 / Zoom large / Zoom / 4:3): disponible uniquement lorsque le format de l’image est défini sur 16:9 Auto. Vous pouvez déterminer le format d’image souhaité sur 4:3 WSS (Wide Screen Service) ou sur la taille d’origine. Chaque pays européen impose une taille d’image différente. N Non disponible en mode PC, Composant et HDMI.◀ ▶ Français ❑ Modification des options d’image ■ Paramètres avancés O MENUm → Image → Paramètres avancés → ENTERE (L’option Paramètres avancés est disponible dans le mode Standard / Cinéma) Comparés aux modèles précédents, les nouveaux téléviseurs Samsung offrent une image plus précise. N En mode PC, vous ne pouvez modifier que les options Gamma et Balance blancs.◀ ▶ Français ● Nuance de noir (Arrêt / Sombre / Plus sombre / Le plus sombre): sélectionnez le niveau de noir afin de régler la profondeur d’écran. ● Contraste Dyn. (Arrêt / Bas / Moyen / Elevé): permet de régler le contraste de l’écran. ● Gamma: permet de régler l’intensité des couleurs primaires. ● L’image affichée peut varier en fonction du modèle. Paramètres avancés Nuance de noir : Arret r Contraste Dyn. : Moyen Gamma : 0 RVB uniquement : Arret Espace de couleur : Natif Balance blancs Carnation : 0 d U Déplacer EEntrer R Retour◀ ▶ Français ● RVB uniquement (Arrêt / Rouge / Vert / Bleu): Affiche les couleurs Rouge, Vert et Bleu afin de permettre un réglage précis de la teinte et de la saturation. ● Espace de couleur (Auto. / Natif): permet de régler la gamme des couleurs disponibles pour créer l’image. ● Balance blancs: permet de régler la température des couleurs pour que l’image soit plus naturelle. Aj. Rouge / Aj. Vert / Aj. Bleu: permet de régler la profondeur de chaque couleur (rouge, vert, bleu). Régl. Rouge / Régl. vert / Régl. bleu: permet de régler la luminosité de chaque couleur (rouge, vert, bleu). Réin.: rétablit les paramètres de balance des blancs par défaut.◀ ▶ Français ● Carnation: Accentue la rougeur de la carnation. ● Netteté des contours (Arrêt / Activé): fait ressortir les contours des objets. ● Lumin./Mouvement (Arrêt / Activé): permet de réduire la consommation d’électricité en contrôlant la luminosité. N Lorsque vous modifiez une valeur de Contraste, Lumin./Mouvement est défini sur Arrêt.◀ ▶ Français ■ Options d’image O MENUm → Image → Options d’image → ENTERE N En mode PC, vous pouvez uniquement apporter des modifications aux options Nuance Coul. ● Nuance Coul. (Froide / Standard / Chaude1 / Chaude2) N Les options Chaude1 ou Chaude2 ne sont activées que si le mode d’image est Dynamique. N Les paramètres peuvent être définis et mémorisés pour chaque appareil externe connecté à une entrée du téléviseur. ● L’image affichée peut varier en fonction du modèle. Options d’image Nuance Coul. : Standard r Filtre Bruit num. : Auto. Filtre Bruit MPEG : Auto. Niv. noir HDMI : Normal Mode Film : Arrêt U Déplacer EEntrer R Retour◀ ▶ Français ● Filtre Bruit num. (Arrêt / Bas / Moyen / Elevé / Auto. / Visualisation auto): si le signal de radiodiffusion reçu par votre téléviseur est faible, vous pouvez activer la fonction Filtre Bruit num. pour faciliter la réduction d’images fantômes ou statiques qui peuvent apparaître à l’écran. N Lorsque le signal est faible, sélectionnez une autre option jusqu’à obtention de la meilleure image possible. ● Visualisation auto: Lors du changement des chaînes analogiques, il affiche l’intensité du signal. N Disponible uniquement pour les chaînes analogiques. N Lorsque la barre est verte, vous recevez le meilleur signal possible. ● Filtre Bruit MPEG (Arrêt / Bas / Moyen / Elevé / Auto.): Réduit le bruit MPEG pour améliorer la qualité de l’image.◀ ▶ Français ● Niv. noir HDMI (Bas / Normal): permet de choisir le niveau de noir pour régler la profondeur de l’écran. N Disponible en mode HDMI (RVB) uniquement. ● Mode Film (Arrêt / Auto.1 / Auto.2 / Cinema Smooth pour les PDP 550 ): règle le téléviseur de sorte qu’il détecte et traite automatiquement les signaux de cinéma en provenance de toutes les sources et adapte l’image afin d’obtenir une qualité optimale. La fonction Cinema Smooth n’est activée que lorsqu’un signal HDMI 24 Hz est en entrée. N Disponible en modes TV, AV, COMPOSANT (480i / 1080i) et HDMI (1080i). ■ Réinit. param. img (OK / Annuler) Rétablit les paramètres par défaut du mode d’image actuel.◀ ▶ Français ❑ Configuration du téléviseur avec le PC Réglez le mode d’entrée sur PC. ■ Réglage Automatique O MENUm → Image → Réglage Automatique → ENTERE Cette option permet de régler les positions / valeurs de fréquence et d’affiner automatiquement les paramètres. N Non disponible en cas de connexion à l’aide d’un câble HDMI vers DVI.◀ ▶ Français ■ Réglage écran PC O MENUm → Image → Réglage de l’écran → Réglage écran PC → ENTERE ● Régl. Base / Regl. Préc: élimine ou réduit les parasites visuels. Si vous ne pouvez pas éliminer ces parasites au moyen d’un réglage précis uniquement, réglez la fréquence (Régl. Base) au mieux, puis effectuez de nouveau un réglage précis. Une fois les parasites réduits, effectuez un nouveau réglage de l’image pour l’aligner au centre de l’écran. ● Position: réglez la position de l’écran du PC à l’aide des touches de direction (u / d / l / r). ● Réinitialiser Image: rétablit les paramètres d’image par défaut.◀ ▶ Français Utilisation de votre téléviseur comme écran d’ordinateur (PC) Configuration de votre logiciel PC (instructions basées sur Windows XP) En fonction de la version de Windows et de la carte vidéo, il se peut que les écrans de votre PC présentent un aspect différent. Dans ce cas, les mêmes informations de paramétrage de base seront presque toujours d’application. Dans le cas contraire, contactez le fabricant de votre ordinateur ou votre revendeur Samsung. 1. Cliquez sur ‘Panneau de configuration’ dans le menu Démarrer de Windows. 2. Cliquez sur “Apparence et thèmes” dans le “Panneau de configuration”. Une boîte de dialogue s’ouvre alors. 3. Cliquez sur “Affichage” et une boîte de dialogue apparaît.◀ ▶ Français 4. Naviguez vers l’onglet “Paramètres” dans la boîte de dialogue. ● S’il existe une option de fréquence verticale dans votre boîte de dialogue des paramètres d’affichage, la valeur correcte est “60” ou “60 Hz”. Sinon, cliquez sur “OK” et quittez la boîte de dialogue.◀ ▶ Français ❑ Changement du mode Son prédéfini ■ Mode Son ● Standardt: sélectionne le mode son normal. ● Musique: accentue la musique par rapport aux voix. ● Cinéma: offre le meilleur son pour les films. ● Voix claire: accentue les voix par rapport aux autres sons. ● Amplifier: augmente l’intensité du son aigu pour garantir une meilleure écoute aux personnes malentendantes. N Si l’option Sélection Haut-parleur est définie sur Ht-parl ext est désactivé.◀ ▶ Français ❑ Réglage des paramètres sonores O MENUm → Son → Sound Effect →ENTERE ■ Effet sonore ● SRS TruSurround HD (Arrêt / Activé) (mode de son standard uniquement) Cette fonction garantit un son surround virtuel 5.1 canaux par le biais de deux haut-parleurs grâce à la technologie HRTF (Head Related Transfer Function). N Si l’option Sélection Haut-parleur est définie sur Ht-parl ext, SRS TruSurround HD est désactivé.◀ ▶ Français ● SRS TruDialog (Arrêt / Activé) (mode de son standard uniquement) Cette fonction permet d’accentuer l’intensité d’une voix par rapport au fond musical ou aux effets sonores, de manière à rendre les dialogues plus clairs. N Si l’option Sélection Haut-parleur est définie sur Ht-parl ext, SRS TruDialog est désactivé.◀ ▶ Français ● Egaliseur Cette fonction permet de régler le mode de son (mode de son standard uniquement). – Balance G/D: règle la balance entre les haut-parleurs droit et gauche. – 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (réglage de la bande passante): règle le niveau des fréquences de bande passante spécifiques. – Réinit.: rétablit les paramètres par défaut de l’égaliseur. N Si l’option Sélection Haut-parleur est définie sur Ht-parl ext, Egaliseur est désactivé.◀ ▶ Français ■ Options diffusion du son ● Langue audio (chaînes numériques uniquement) Permet de modifier la valeur par défaut des langues audio. N La langue disponible peut varier en fonction de l’émission. ● Format Audio (chaînes numériques uniquement) Lorsque le son est émis à la fois par le haut-parleur principal et le récepteur audio, un effet d’écho peut se produire en raison de la différence de vitesse de décodage entre le haut-parleur principal et le récepteur audio. Dans ce cas, utilisez la fonction Haut-parleur TV.◀ ▶ Français N L’option Format Audio peut varier en fonction de l’émission. Le son Dolby Digital 5.1 est disponible uniquement en cas de connexion d’un haut parleur externe au moyen d’un câble optique. ● Description audio (non disponible dans toutes les régions) (chaînes numériques uniquement) Cette fonction traite le flux audio relatif à la description audio (AD) lorsqu’il est envoyé avec le son principal par le radiodiffuseur. N Description audio (Arrêt / Activé): active ou désactive la fonction de description audio. N Volume: permet de régler le volume de description audio.◀ ▶ Français ■ Paramètre supp. (chaînes numériques uniquement) ● Niveau Audio DTV (MPEG / HE-AAC): cette fonction vous permet de régler le niveau sonore souhaité (à savoir l’un des signaux reçus lors d’une émission de télévision numérique). N En fonction du type de signal de radiodiffusion, les options MPEG / HEAAC peuvent être définies sur une valeur comprise entre -10 dB et 0 dB. N Pour augmenter ou diminuer le volume, réglez ces valeurs entre 0 et -10, respectivement.◀ ▶ Français ● Sortie SPDIF: SPDIF (Sony Philips Digital InterFace) permet d’offrir un son numérique et de réduire ainsi les interférences vers les haut-parleurs et divers appareils numériques, tels qu’un lecteur DVD. Format Audio: Vous pouvez sélectionner le format de sortie audio numérique (SPDIF). N Le format de sortie audio numérique (SPDIF) peut varier en fonction de la source d’entrée. Retard Audio: Permet de corriger les problèmes de synchronisation audiovidéo, lorsque vous regardez la télévision ou une vidéo, et d’écouter une sortie audio numérique à l’aide d’un appareil externe tel qu’un récepteur AV (0 ms ~ 250 ms).◀ ▶ Français ● Comp Dolby Digital (Line / RF): cette fonction réduit la différence de niveau sonore entre un signal Dolby Digital et d’autre (à savoir, Audio MPEG, HE-AAC, Son ATV). N Sélectionnez Line pour obtenir un son dynamique et RF pour réduire la différence de niveau sonore entre l’autre format audio. Line: Permet de définir le niveau de sortie des signaux supérieurs ou inférieurs à -31 dB (référence) sur -20 dB ou -31 dB. RF: Permet de définir le niveau de sortie des signaux supérieurs ou inférieurs à -20 dB (référence) sur -10 dB ou -20 dB.◀ ▶ Français ■ Paramètres haut-parleur ● Sélection Haut-parleur (Ht-parl ext / Haut-parleur TV): Lorsque le récepteur Audio externe est utilisé en passant par SPDIF, un effet d’écho peut se produire en raison de la différence de vitesse de décodage entre le haut-parleur principal et le récepteur audio. Dans ce cas, réglez le téléviseur sur Ht-parl ext. N Lorsque l’option Sélection Haut-parleur est définie sur Haut-parleur ext, les boutons de volume et MUTE ne sont pas opérationnels et les paramètres sonores sont limités. N Lorsque Sélection Haut-parleur est défini sur Haut-parleur ext. ● Haut-parleur TV: Arrêt, Haut-parleur ext: Activé◀ ▶ Français N Lorsque Sélection Haut-parleur est défini sur Haut-parleur TV. ● Haut-parleur TV: Activé, Haut-parleur ext: Activé N En l’absence de signal vidéo, les deux haut-parleurs sont coupés. ● Volume auto (Arrêt / Normal / Nuit): Pour équilibrer le niveau de volume sur chaque canal, définissez cette option sur Normal. Nuit: Ce mode propose un meilleur son que celui du mode Normal, ne faisant presque aucun bruit. Il s’avère particulièrement utile pendant la nuit. ■ Réinit. son (OK / Annuler) Cette fonction permet de rétablir tous les paramètres sonores par défaut.◀ ▶ Français ❑ Connexion à un réseau câblé Pour les séries PDP 550 et 570 Vous pouvez connecter votre téléviseur au réseau local de trois manières différentes: ● En connectant le port LAN situé à l'arrière du téléviseur à un modem externe à l'aide d'un câble LAN. Voir le schéma ci-dessous. Préférence Connecteur modem mural LAN Câble modem Câble LAN Modem externe (ADSL / VDSL / TV par câble)◀ ▶ Français ● En connectant le port LAN situé à l'arrière du téléviseur à un routeur IP connecté, à son tour, à un modem externe. Utilisez le câble LAN pour la connexion. Voir le schéma ci-dessous. Connecteur modem mural LAN Câble modem Câble LAN Câble LAN Modem externe (ADSL / VDSL / TV par câble) Routeur IP (avec serveur DHCP)◀ ▶ Français ● En fonction de la configuration de votre réseau, il se peut que vous puissiez connecter directement le port LAN situé à l'arrière du téléviseur à une prise réseau murale à l'aide d'un câble LAN. Voir le schéma ci-dessous. Nous attirons votre attention sur le fait que la prise murale est connectée à un modem ou routeur situé en un autre point de la maison. Connecteur LAN mural LAN Câble LAN◀ ▶ Français ● Si vous possédez un réseau dynamique, vous devez utiliser un modem ou routeur ADSL prenant en charge le protocole DHCP (Dynamic Host Configuration Protocol). Les modems et routeurs de ce type fournissent automatiquement l'adresse IP, le masque de sous-réseau, la passerelle et les valeurs DNS dont votre téléviseur a besoin pour accéder à Internet. Aucune saisie manuelle n'est donc requise. La plupart des réseaux domestiques sont de type dynamique. Certains réseaux nécessitent une adresse IP statique. Si tel est votre cas, vous devez saisir manuellement l'adresse IP, le masque de sous-réseau, la passerelle et les valeurs DNS dans l'écran de configuration câble de votre téléviseur lors de la configuration de la connexion réseau. Pour obtenir ces données, contactez votre fournisseur d'accès Internet. Si vous disposez d'un ordinateur Windows, vous pouvez également utiliser ce dernier pour obtenir ces paramètres. N Si votre réseau nécessite une adresse IP statique, vous pouvez utiliser un modem ADSL prenant en charge le protocole DHCP. En effet, les modems de ce type vous permettent également d'utiliser des adresses IP statiques.◀ ▶ Français ❑ Configuration du réseau Pour la série PDP 550 / 570 ■ Paramètres réseau O MENUm → Réseau → Paramètres réseau→ ENTERE Définissez la connexion réseau de manière à utiliser divers services Internet, tels que et AllShare, ou encore procéder à la mise à niveau du logiciel. ■ Etat du réseau O MENUm → Réseau → Etat du réseau→ ENTERE Vous pouvez vérifier l'état du réseau actuel et de la connexion Internet.◀ ▶ Français ■ Paramètres AllShare O MENUm → Réseau → Paramètres AllShare→ ENTERE Sélectionne l'utilisation de fonctions média sur le réseau. ■ Paramètre réseau (Auto.) Utilisez l'option de configuration automatique du réseau lors de la connexion du téléviseur à un réseau prenant en charge le protocole DHCP. Pour configurer automatiquement la connexion réseau par câble de votre téléviseur, procédez comme suit :◀ ▶ Français Procédure de configuration automatique 1. Accédez à l'écran Paramètres réseau. Pour ce faire, suivez les instructions de la section Paramètres réseau. 2. Sélectionnez l'option Câble. 3. L'écran de test du réseau s'affiche et la configuration du réseau est effectuée. U Déplacer E Entrer R Retour Paramètres réseau Sélectionnez le type de connexion réseau. Câble Sans fil (général) WPS(PBC) One Foot Connection Connexion au réseau par câble réseau. Vérifiez que le câble réseau est correctement branché. ◀ ▶ Français N Si la configuration automatique échoue, vérifiez la connexion du port LAN. N Si les valeurs de connexion réseau sont introuvables ou si vous souhaitez définir la connexion manuellement, définissez cette option sur Manuel. Reportez-vous à la section "Procédure de configuration manuelle" ● L'image affichée peut varier en fonction du modèle. a Déplacer E Entrer R Retour Paramètre réseau La connexion au réseau sans fil et à Internet est maintenant terminée. Réessayer OK Adresse MAC 00:40:30:30:20:10 Adresse IP 192.168.10.21 Masque ss-réseau 255.255.255.0 Passerelle 192.168.10.1 Serveur DNS 203.248.252.2 La connexion à Internet a été établie avec succès. Si vous rencontrez des problèmes lors de l'utilisation du service Internet, contactez votre fournisseur d'accès. Param. IP◀ ▶ Français ■ Paramètre réseau (Manuel) Utilisez l'option de configuration manuelle du réseau lors de la connexion du téléviseur à un réseau qui nécessite une adresse IP statique. Obtention des valeurs de connexion au réseau Pour obtenir les valeurs de connexion au réseau sur la plupart des ordinateurs Windows, procédez comme suit: 1. Cliquez avec le bouton droit de la souris sur l'icône Réseau située dans le coin inférieur droit de l'écran. 2. Cliquez sur Etat dans le menu contextuel. 3. Cliquez sur l'onglet Assistance dans la boîte de dialogue affichée. 4. Cliquez sur le bouton Détails dans l'onglet Assistance. Les valeurs de connexion réseau sont affichées.◀ ▶ Français Procédure de configuration automatique Pour configurer manuellement la connexion réseau par câble de votre téléviseur, procédez comme suit: 1. Suivez les étapes 1 et 2 de la procédure de configuration automatique. 2. Sélectionnez Param. IP dans l'écran de test du réseau. 3. Définissez Mode IP sur Manuel. 4. Appuyez sur le bouton d de la télécommande pour accéder à l'Adresse IP ● L'image affichée peut varier en fonction du modèle. U Déplacer E Entrer R Retour Paramètres IP Config. prot. Internet : Manuel r Adresse IP . . . Masque ss-réseau . . . Passerelle . . . DNS : Manuel Serveur DNS . . . OK◀ ▶ Français 5. Entrez les valeurs Adresse IP, Masque ss-réseau, Passerelle et Serveur DNS. Utilisez les touches numériques de votre télécommande pour saisir des chiffres et les touches fléchées pour passer d'un champ de saisie à un autre. 6. Lorsque vous avez terminé, sélectionnez OK. 7. L'écran de test du réseau s'affiche et la configuration du réseau est effectuée.◀ ▶ Français ❑ Connexion à un réseau sans fil Pour la série PDP 550 / 570 Pour établir une connexion sans fil entre le téléviseur et le réseau, vous avez besoin d'un routeur ou d'un modem et d'un adaptateur LAN sans fil Samsung (WIS09ABGN, WIS09ABGN2, WIS10ABGN), que vous connectez à la prise USB située sur le panneau latéral ou arrière du téléviseur. Voir l'illustration ci-dessous. Connecteur LAN mural Câble LAN Wireless IP sharer (router having DHCP server) Adaptateur LAN sans fil Samsung Panneau arrière du téléviseur◀ ▶ Français L'adaptateur sans fil LAN Samsung est vendu séparément et est disponible chez quelques revendeurs tels que les sites Ecommerce et Samsungparts.com. L'adaptateur WLAN Samsung prend en charge les protocoles de communication IEEE 802,11a/b/g et n. Samsung vous conseille d'utiliser le protocole IEEE 802,11n. Si vous lisez une vidéo sur une connexion réseau, des saccades risquent d'apparaître. N REMARQUE ● Vous devez employer l'adaptateur LAN sans fil Samsung (WIS09ABGN, WIS09ABGN2, WIS10ABGN) pour utiliser un réseau sans fil.◀ ▶ Français ● Pour utiliser un réseau sans fil, votre téléviseur doit être connecté à un dispositif de partage IP sans fil (un routeur ou un modem). Si ce routeur prend en charge le protocole DHCP, le téléviseur peut utiliser DHCP ou une adresse IP statique pour se connecter au réseau sans fil. ● Sélectionnez un canal inutilisé pour le routeur IP sans fil. Si le canal affecté au routeur IP sans fil est actuellement utilisé par un autre périphérique à proximité, il y aura des interférences et des interruptions de communication. ● Si vous utilisez des paramètres de sécurité différents de ceux indiqués cidessous, le routeur ne fonctionnera pas avec le téléviseur.◀ ▶ Français ● Si le mode Pure High-throughput (Greenfield) 802,11n est sélectionné et que le type de cryptage est défini sur WEP, TKIP ou TKIP-AES (WPS2Mixed) pour votre point d'accès, les téléviseurs Samsung ne prendront pas en charge la connexion, conformément aux nouvelles spécifications de certification Wi-Fi. ● Si votre point d'accès prend en charge la norme WPS (Wi-Fi Protected Setup), vous pouvez vous connecter au réseau via PBC (Push Button Configuration) ou à l'aide d'un code PIN (Personal Identification Number). La fonction WPS configurera automatiquement le SSID et la clé WPA dans ces deux modes. ● Si votre routeur, modem ou appareil n'est pas certifié, il risque de ne pas pouvoir se connecter au téléviseur via l'adaptateur LAN sans fil Samsung.◀ ▶ Français ● Assurez-vous que le téléviseur est hors tension avant de connecter l'adaptateur LAN sans fil Samsung. ● Méthodes de connexion: vous pouvez configurer la connexion réseau sans fil de six façons différentes. – Configuration automatique (à l'aide de la fonction Recherche réseau automatique) – Configuration manuelle – WPS(PBC) – Ad Hoc – One Foot Connection – Plug & Access◀ ▶ Français ● L'adaptateur LAN sans fil Samsung peut ne pas être reconnu si vous utilisez une connexion par hub USB ou par câble d'extension USB autre que le câble fourni. ■ Paramètre réseau (Auto.) La plupart des réseaux sans fil disposent d'un système de sécurité en option qui oblige les périphériques qui y accèdent à transmettre un code de sécurité chiffré, appelé Clé d'accès ou de sécurité. Cette clé de sécurité repose sur une phrase de passe ; il s'agit généralement d'un mot ou d'une série de lettres et de chiffres d'une longueur donnée que vous avez été invité à saisir lors de la configuration de la sécurité de votre réseau sans fil. Si vous utilisez cette méthode de configuration et qu'une clé de sécurité est définie pour votre réseau sans fil, vous devrez saisir la phrase de phase lors de la procédure de configuration.◀ ▶ Français Procédure de configuration automatique 1. Accédez à l'écran Paramètres réseau. Pour ce faire, suivez les instructions de la section Paramètres réseau. 2. Sélectionnez Sans fil. ● L'image affichée peut varier en fonction du modèle. U Déplacer E Entrer R Retour Paramètres réseau Sélectionnez le type de connexion réseau. Câble Sans fil (général) WPS(PBC) One Foot Connection Configurez le réseau sans fil en sélectionnant votre routeur sans fil. En fonction de sa configuration, il vous sera peut- être demandé d'entrer une clé de sécurité.◀ ▶ Français 3. La fonction Réseau recherche les réseaux sans fil disponibles. Lorsque vous avez terminé, la liste des réseaux disponibles s'affiche. 4. Dans la liste des réseaux, appuyez sur le bouton u ou d pour sélectionner un réseau, puis appuyez sur le bouton ENTERE. N Si le point d'accès est caché (Invisible), vous devez sélectionner l'option Ajouter réseau et entrer les valeurs Nom du réseau (SSID) et Code de sécurité pour établir la connexion. 5. Si la fenêtre contextuelle Sécurité s'affiche, passez à l'étape 6. Si vous sélectionnez le point d'accès dépourvu de sécurité, allez à l'étape 7.◀ ▶ Français 6. Si le point d'accès est sécurisé, entrez la clé de sécurité (Sécurité ou Code PIN), puis sélectionnez Terminé. N Lors de la saisie de la clé de sécurité (Sécurité ou Code PIN), utilisez les touches u / d / l / r de votre télécommande pour sélectionner des chiffres/caractères. N La phrase de passe doit normalement se trouver sur l'un des écrans de configuration que vous avez utilisés pour configurer votre routeur ou modem. ● L'image affichée peut varier en fonction du modèle. a Précédent b Terminé n Déplacer E Entrer R Retour Paramètre réseau Entrez la clé de sécurité. 0 sais. a g m s a/A b h n t f l r x Espace d j p v Supprimer 2 5 8 z Terminé c i o u F 1 4 7 y e k q w 3 6 9 0◀ ▶ Français 7. L'écran de connexion du réseau s'affiche et la configuration du réseau est effectuée. N Si la définition de la clé de sécurité (Sécurité ou Code PIN) échoue, sélectionnez Réin. ou Param. IP. N Si vous souhaitez définir manuellement la connexion, sélectionnez Param. IP.. Reportez-vous à la section "Procédure de configuration manuelle"◀ ▶ Français ■ Config. du réseau (Manuel) Utilisez l'option de configuration manuelle du réseau lors de la connexion du téléviseur à un réseau qui nécessite une adresse IP statique. Obtention des valeurs de connexion au réseau Pour obtenir les valeurs de connexion au réseau sur la plupart des ordinateurs Windows, procédez comme suit: 1. Cliquez avec le bouton droit de la souris sur l'icône Réseau située dans le coin inférieur droit de l'écran. 2. Cliquez sur Etat dans le menu contextuel.◀ ▶ Français 3. Cliquez sur l'onglet Assistance dans la boîte de dialogue affichée. 4. Cliquez sur le bouton Détails dans l'onglet Assistance. Les valeurs de connexion réseau sont affichées. Procédure de configuration manuelle Pour configurer manuellement la connexion réseau par câble de votre téléviseur, procédez comme suit: 1. Suivez les étapes 1 et 2 de la procédure de configuration automatique. 2. Sélectionnez Param. IP dans l'écran de test du réseau. 3. Définissez Mode IP sur Manuel.◀ ▶ Français 4. Appuyez sur le bouton d de la télécommande pour accéder à l' Adresse IP. 5. Entrez les valeurs Adresse IP, Masque ss-réseau, Passerelle et Serveur DNS. Utilisez les touches numériques de votre télécommande pour saisir des chiffres et les touches fléchées pour passer d'un champ de saisie à un autre. 6. Lorsque vous avez terminé, sélectionnez OK. 7. L'écran de test du réseau s'affiche et la configuration du réseau est effectuée.◀ ▶ Français ■ Config. du réseau (WPS(PBC)) Configuration à l'aide de la méthode WPS(PBC) Si votre routeur est pourvu d'un bouton PBC (WPS), procédez comme suit: 1. Accédez à l'écran Paramètres réseau. Pour ce faire, suivez les instructions de la section Paramètres réseau. 2. Sélectionnez WPS(PBC). 3. Appuyez sur le bouton WPS(PBC) de votre routeur dans les deux minutes. Votre téléviseur récupère automatiquement tous les paramètres réseau dont il a besoin et se connecte à votre réseau. 4. L'écran de test du réseau s'affiche et la configuration du réseau est effectuée. ● L'image affichée peut varier en fonction du modèle. U Déplacer E Entrer R Retour Paramètres réseau Sélectionnez le type de connexion réseau. Câble Sans fil (général) WPS(PBC) One Foot Connection Connectez-vous au routeur sans fil en appuyant simplement sur le bouton WPS(PBC). Procédez de cette manière si votre routeur sans fil prend en charge la méthode PBC.◀ ▶ Français ■ Paramètres réseau (One Foot Connection) La fonction One Foot Connection vous permet de connecter automatiquement votre téléviseur Samsung à un routeur Samsung sans fil placé votre point d'accès à 25 cm de votre téléviseur. Si votre routeur sans fil ne prend pas en charge la fonction One Foot Connection, vous devez vous connecter en utilisant l'une des autres méthodes. N Vous pouvez rechercher du matériel prenant en charge la fonction One Foot Connection sur www.samsung.com.◀ ▶ Français Configuration à l'aide de la fonction One Foot Connection Mettez le routeur et le téléviseur sous tension. 1. Accédez à l'écran Paramètres réseau. Pour ce faire, suivez les instructions de la section Paramètres réseau. 2. Sélectionnez One Foot Connection. 3. Placer le routeur sans fil en parallèle avec l'adaptateur LAN sans fil Samsung à une distance inférieure à 25 cm. ● L'image affichée peut varier en fonction du modèle. U Déplacer E Entrer R Retour Paramètres réseau Sélectionnez le type de connexion réseau. Câble Sans fil (général) WPS(PBC) One Foot Connection Connectez-vous automatiquement au réseau sans fil si votre point d'accès prend en charge One Foot Connection. Pour sélectionner ce type de connexion, positionnez le point d'accès à 25 cm de votre TV.◀ ▶ Français N Si la fonction One Foot Connection ne parvient pas à connecter le téléviseur à votre point d'accès, une fenêtre contextuelle s'ouvre pour vous informer de l'échec. Si vous essayez d'utiliser à nouveau One Foot Connection, réinitialisez le point d'accès, déconnectez l'adaptateur LAN sans fil Samsung, puis réessayez à partir de l'étape 1. Vous pouvez également opter pour l'une des autres méthodes de configuration de la connexion.◀ ▶ Français 4. L'écran de connexion du réseau s'affiche et la configuration du réseau est effectuée. 5. Placez le point d'accès à l'emplacement souhaité. N En cas de modification des paramètres du point d'accès ou d'installation d'un nouveau point d'accès, vous devez effectuer à nouveau la procédure One Foot Connection en commençant à l'étape 1.◀ ▶ Français ■ Paramètre réseau (Plug & Access) La fonction Plug & Access vous permet de connecter facilement votre routeur sans fil Samsung à votre téléviseur Samsung à l'aide d'une clé USB. Si votre routeur sans fil ne prend pas en charge la fonction Plug & Access, vous devez vous connecter en utilisant l'une des autres méthodes. N Vous pouvez rechercher du matériel prenant en charge la fonction Plug & Access sur le site Web www. samsung.com Configuration à l'aide de la fonction Plug & Access Mettez le point d'accès et le téléviseur sous tension. 1. Insérez la clé USB dans le routeur sans fil Samsung et vérifiez l'état du voyant du routeur (clignotant → allumé). 2. Enlevez ensuite la clé USB et insérez-la dans le téléviseur Samsung.◀ ▶ Français 3. Attendez que la connexion soit établie automatiquement. N Si la fonction Plug & Access ne parvient pas à connecter le téléviseur à votre routeur sans fil, une fenêtre contextuelle s'ouvre pour vous informer de l'échec. Si vous essayez d'utiliser à nouveau Plug & Access, réinitialisez le routeur sans fil, déconnectez l'adaptateur LAN sans fil Samsung, puis réessayez à partir de l'étape 1. Vous pouvez également opter pour l'une des autres méthodes de configuration de la connexion. 4. L'écran de connexion du réseau s'affiche et la configuration du réseau est effectuée. 5. Placez le point d'accès à l'emplacement souhaité. N En cas de modification des paramètres du routeur sans fil ou d'installation d'un nouveau routeur sans fil, vous devez effectuer à nouveau la procédure Plug & Access, en commençant à l'étape 1.◀ ▶ Français Priorité HQS Le routeur sans fil Samsung est une solution de diffusion AV HD optimisée pour les téléviseurs numériques Samsung. Il s'agit là d'une fonction distinctive de notre produit. Le routeur sans fil Samsung peut être connecté à de nombreux périphériques, tels que des ordinateurs portables, des téléphones mobiles, des lecteurs BD, etc. Si vous connectez un téléviseur Samsung au routeur sans fil Samsung alors que d'autres dispositifs sont déjà connectés, le routeur attribue au téléviseur une connexion prioritaire. Cette fonction garantit un débit et une qualité de diffusion optimales. ● Accélérez le débit de votre téléviseur en donnant priorité à la bande passante de votre téléviseur (activation / désactivation facultative). ● En donnant la priorité aux téléviseurs Samsung, profitez du contenu HD sans mise en mémoire tampon. ● La vitesse de connexion peut différer en fonction de l'environnement réseau.◀ ▶ Français ■ Paramètres réseau (Ad-Hoc) Vous pouvez établir une connexion à un appareil mobile prenant en charge le mode Ad-Hoc sans utiliser un point d'accès en passant par l'adaptateur LAN sans fil Samsung. Lors de la connexion d'un appareil mobile, vous pouvez utiliser des fichiers qui y sont stockés ou vous connecter à Internet à l'aide de la fonction AllShare ou Multimédia. Comment établir une nouvelle connexion Ad-hoc 1. Accédez à l'écran Paramètres réseau. Pour ce faire, suivez les instructions de la section Paramètres réseau. 2. Sélectionnez Sans fil.◀ ▶ Français 3. Une fois la recherche d'un appareil mobile terminée, définissez le Nom du réseau (SSID) et la clé de sécurité de l'appareil, puis établissez la connexion réseau. N Si le réseau ne fonctionne pas correctement, vérifiez à nouveau le Nom du réseau (SSID) et la clé de sécurité. Une clé de sécurité incorrecte peut provoquer un dysfonctionnement. N Lorsque vous connectez un appareil, il s'affiche dans la liste Paramètre réseau. La prochaine fois que vous le connecterez, vous le trouverez dans cette liste.◀ ▶ Français Si le téléviseur ne parvient pas à se connecter à Internet Il se peut que la connexion échoue car votre fournisseur d'accès Internet a enregistré, de manière permanente, l'adresse MAC (numéro d'identification unique) de votre ordinateur ou modem et qu'il utilise cette adresse à des fins d'authentification chaque fois que vous vous connectez à Internet. Cela a pour but d'empêcher tout accès non autorisé. Dans la mesure où votre téléviseur possède une adresse MAC différente, votre fournisseur d'accès Internet ne peut pas l'authentifier, ce qui rend impossible toute connexion. Pour remédier à ce problème, demandez à votre fournisseur d’accès la procédure à suivre pour connecter des appareils autres que votre PC (votre téléviseur, par exemple) à Internet. Si votre fournisseur d'accès exige un identifiant (ID) ou un mot de passe pour la connexion à Internet, votre téléviseur ne pourra peut-être pas se connecter à Internet. Si tel est le cas, vous devez entrer l'identifiant ou le mot de passe lors de la connexion à Internet. La connexion à Internet peut échouer en raison d'un problème de pare-feu. Dans ce cas, contactez votre fournisseur d'accès Internet. Si vous ne parvenez toujours pas à vous connecter à Internet après avoir suivi les procé- dures indiquées par votre fournisseur d'accès.◀ ▶ Français ❑ Réglage de l'heure O MENUm → Système → ENTERE ■ Heure ● Horloge: le réglage de l'heure est nécessaire pour utiliser différentes fonctions de minuterie du téléviseur. O L'heure actuelle s'affiche à chaque fois que vous appuyez sur le bouton INFO. N Si vous débranchez le cordon d'alimentation, vous devez régler à nouveau l'horloge. – Mode Horloge (Auto. / Manuel) Auto.: règle automatiquement l'heure en fonction des signaux diffusés par une chaîne numérique.◀ ▶ Français N L'antenne doit être connectée pour permettre le réglage automatique de l'heure. Manuel: permet de régler l'heure manuellement. N En fonction du signal et de la station de diffusion, il se peut que la configuration automatique de l'heure soit incorrecte. Dans ce cas, réglez l'heure manuellement. – Réglage Horloge: Réglez les paramètres Jour, Mois, Année, Heure et Minute. N Disponible uniquement lorsque l'option Mode Horloge est définie sur Manuel. N Vous pouvez régler directement le mois, le jour, les heures et les minutes en appuyant sur les boutons numériques de la télécommande. – Fuseau Horaire (Auto. / Manuel): Sélectionnez GMT comme fuseau horaire. N L'option peut varier en fonction du pays. N Cette fonction n'est disponible que si l'option Mode Horloge est définie sur Auto.◀ ▶ Français Utilisation de la veille O MENUm → Système → Heure → Veille → ENTERE ● Veillet: éteint automatiquement le téléviseur après une période déterminée (30, 60, 90, 120, 150 et180 minutes). N Pour annuler la fonction Veille, sélectionnez Arrêt.◀ ▶ Français Réglage de la minuterie de mise en marche / arrêt O MENUm → Système → Heure → ENTERE ● Progr. activ. 1 / Progr. activ. 2 / Progr. activ. 3: vous pouvez définir trois réglages différents. Vous devez, au préalable, régler l'horloge. Configuration: Sélectionnez Arrêt, Une fois, Quotid., Lun~Ven, Lun~Sam, Sam~Dim ou Manuel selon vos besoins. Si vous sélectionnez Manuel, vous pouvez choisir le jour d'activation de la minuterie. N Le symbole c indique que le jour est sélectionné. ● L'image affichée peut varier en fonction du modèle. TV 11 00 20 DTV 1 Progr. activ. 1 Configuration Une fois 11 Source Période d'activation Volume Antenne Canal Dim Lun Mar Mer Jeu Ven Sam L Déplacer U Régler E Entrer R Retour◀ ▶ Français Période d'activation: Règle les heures et les minutes. Volume: Permet de sélectionner le volume désiré. Source: Sélectionnez le contenu TV ou USB à lire lors de la mise sous tension automatique du téléviseur. (L'option USB peut uniquement être sélectionnée lorsqu'un périphérique USB est connecté au téléviseur.) Antenne (lorsque Source est défini sur TV): Sélectionnez la source d'antenne de votre choix. Canal (lorsque Source est défini sur TV): Sélectionnez la chaîne de votre choix. Musique / Photo (lorsque Source est défini sur USB): Permet de sélectionner un dossier du périphérique USB contenant les fichiers de musique ou les images devant être lus lorsque le téléviseur s'allume automatiquement.◀ ▶ Français N Auto Power Off (disponible uniquement lorsque le téléviseur est allumé par le minuteur): le téléviseur est mis hors tension automatiquement après quatre heures d'inactivité pour éviter toute surchauffe. N REMARQUE ● Si le périphérique USB ne contient aucun fichier audio ou si le dossier contenant un fichier audio n'est pas sélectionné, la fonction de veille ne fonctionne pas correctement. ● Si le périphérique USB ne contient qu'un seul fichier photo, la fonction de diaporama ne démarre pas. ● Les dossiers dont le nom est trop long ne peuvent pas être sélectionnés.◀ ▶ Français ● Chaque périphérique USB utilisé se voit attribuer son propre dossier. Si vous utilisez plusieurs périphériques USB du même type, assurez-vous que les dossiers affectés à chacun d'eux portent des noms différents. ● Il est conseillé d'utiliser une clé USB et un lecteur de cartes multiformat lors de l'utilisation de la fonction Progr. activ. Il se peut que l'option Progr. activ. ne fonctionne pas avec certains périphériques USB équipés d'une batterie intégrée, ainsi que des lecteurs MP3 et lecteurs multimédias portables de certains fabricants, car leur reconnaissance prend trop de temps.◀ ▶ Français ● Progr. désact. 1 / Progr. désact. 2 / Progr. désact. 3: Vous pouvez définir trois réglages différents. Vous devez, au préalable, régler l'horloge. Configuration: Sélectionnez Arrêt, Une fois, Quotid., Lun~Ven, Lun~Sam, Sam~Dim ou Manuel selon vos besoins. Si vous sélectionnez Manuel, vous pouvez choisir le jour d'activation de la minuterie. N Le symbole c indique que le jour est sélectionné. Période de désactivation: Règle les heures et les minutes. ● L'image affichée peut varier en fonction du modèle. 00 00 Progr. désact. 1 Configuration Une fois Période de désactivation Dim Lun Mar Mer Jeu Ven Sam L Déplacer U Régler E Entrer R Retour◀ ▶ Français ❑ Verrouillage des programmes O MENUm → Système → Sécurité → ENTERE ■ Sécurité L'écran de saisie du code PIN s'affiche. Entrez votre code PIN à quatre chiffres. ● Verr. chaîne (Arrêt / Activé): Vous pouvez verrouiller des chaînes dans la fonction Gestion chaînes afin d'empêcher certains utilisateurs, tels que des enfants, de regarder des émissions qui ne leur sont pas destinées. N Disponible uniquement lorsque la Source est définie sur TV.◀ ▶ Français ● Contrôle Parental (en fonction du pays): cette fonction permet d'empêcher certains utilisateurs, tels que des enfants, de regarder des émissions qui ne leur sont pas destinées, à l'aide d'un code PIN à 4 chiffres défini par l'utilisateur. Si la chaîne sélectionnée est verrouillée, le symbole “\” apparaît. N Les options de Contrôle Parental diffèrent selon le pays. ● Modifier PIN: permet de modifier le code personnel demandé pour pouvoir configurer le téléviseur. ● Serv. adultes (Off / On): permet de régler l'option Serv. adultes. N L'option Serv. adultes est disponible pour l'antenne Freesat uniquement.◀ ▶ Français Comment regarder une chaîne à restriction Si la TV est sur un canal à restriction, la fonction Contrôle Parental le bloque. L’affichage disparaît et fait place au message suivant: Ce canal est bloqué par la fonction Contrôle Parental Entrez le code PIN pour le débloquer.◀ ▶ Français ❑ Solutions économiques ■ Solution Eco O MENUm → Système → Solution Eco → ENTERE ● Mode éco. (Arrêt / Bas / Moyen / Elevé / Image désactivée) t: cette fonction permet de régler la luminosité du téléviseur afin de réduire la consommation. Si vous sélectionnez Image désactivée, l'écran est éteint, mais le son reste activé. Appuyez sur n'importe quel bouton, sauf celui du volume, pour allumer l'écran. ● Capteur Eco (Arrêt / Activé): cette fonction permet d'optimiser vos économies d'énergie ; les réglages de l'image s'adaptent automatiquement en fonction de la luminosité de la pièce.◀ ▶ Français N Lors du réglage de la fonction Lum. Cellules, le Capteur Eco passe sur Arrêt. Lum. cellules min.: lorsque Capteur Eco est défini sur Activé, la luminosité minimale de l'écran peut être définie manuellement. N Si Capteur Eco est défini sur Activé, la luminosité de l'écran peut changer (il devient plus ou moins lumineux) en fonction de l'intensité de la lumière environnante. ● Veille si aucun signal (Arrêt / 15 min / 30 min / 60 min): pour éviter toute consommation d'énergie inutile, définissez la durée d'activation du téléviseur lorsqu'il ne reçoit pas de signal. N Cette fonction est désactivée lorsque le PC est en mode d'économie d'énergie. ● Auto Power Off (Arrêt / Activé): le téléviseur est mis hors tension automatiquement après quatre heures d'inactivité pour éviter toute surchauffe.◀ ▶ Français ❑ Incrustation d'image (PIP) O MENUm → Système → PIP → ENTERE ■ PIP Vous pouvez regarder simultanément le tuner TV et une source vidéo externe. PIP (Picture-in-Picture) ne fonctionne pas dans le même mode.◀ ▶ Français ● PIP (Arrêt / Activé): active ou désactive la fonction PIP. ● Canal: permet de choisir la chaîne affichée dans l'écran secondaire. ● Taille (õ / ã): permet de sélectionner une taille pour l'image secondaire. ● Position (ã / – / — / œ): permet de sélectionner une position pour l'image secondaire. ● Sélection du son (Principal / Secondaire): vous pouvez sélectionner le mode audio de votre choix Principal / Secondaire en mode PIP.◀ ▶ Français N REMARQUE ● Pour le son PIP, reportez-vous aux instructions relatives à Sélection du son. ● Si vous éteignez le téléviseur alors que la fonction PIP est activée, la fenêtre PIP disparaît. ● Il est possible que l'image affichée dans la fenêtre PIP semble légèrement moins naturelle lorsque vous utilisez l'écran principal pour un jeu ou un karaoké. ● Lorsque les fonctions Contrôle Parental sont en cours d'exécution, la fonction PIP ne peut pas être utilisée. ● Réglages PIP Image principale Image secondaire Component, HDMI, PC TV◀ ▶ Français ❑ Autres fonctionnalités O MENUm → Système → ENTERE ■ Langue ● Langue des menus: Permet de définir la langue des menus. ● Langue du télétexte: Permet de définir la langue du télétexte. N L'anglais est utilisé par défaut si la langue sélectionnée n'est pas diffusée. ● Préférence (Langue Audio principale / Langue Audio secondaire / Langue princ. sous-titres / Langue sec. sous-titres / Langue Télétexte principale / Langue Télétexte secondaire): Sélectionnez la langue qui sera utilisée par défaut lors de la sélection d'une chaîne. N L'option peut varier en fonction du pays.◀ ▶ Français ■ Sous-titres Utilisez ce menu pour définir le mode Sous-titres. ● Sous-titres (Arrêt / Activé): Active ou désactive les sous-titres. ● Mode sous-titre (Normal / Malentendant): Configure le mode des sous-titres. ● Langue des sous-titres: Définit la langue des sous-titres. N Si le programme visionné ne prend pas en charge la fonction Malentendant, le mode Langue préférée est automatiquement activé, même si le mode Malentendant est sélectionné. N L'anglais est utilisé par défaut si la langue sélectionnée n'est pas diffusée.◀ ▶ Français ■ Texte numérique (Désactiver / Activer) pour le Royaume Uni Si le programme diffuse du texte numérique, cette fonction est activée. MHEG (Multimedia and Hypermedia Information Coding Experts Group): Norme internationale pour les systèmes de codage des données utilisés avec le multimédia et l'hypermédia. Niveau supérieur à celui du système MPEG, qui inclut de l'hypermédia à liaison de données tel que images fixes, service de caractères, animation, fichiers graphiques et vidéo et données multimédia. MHEG est une technologie d'interaction utilisateur qui s'applique à divers domaines, dont la vidéo à la demande (VOD), la télévision interactive (ITV), le commerce électronique, la téléformation, la téléconférence, les bibliothèques numériques et les jeux en réseau.◀ ▶ Français ■ Protec brûl. écran Pour réduire le risque de brûlure d'écran, cet écran est équipé d'une technologie de prévention des brûlures. Le paramètre Durée permet de programmer la durée en minutes séparant les mouvements de l'image. ● Modif. pixel. (Arrêt / Activé): cette fonction permet de déplacer les pixels sur l'écran dans le sens vertical ou horizontal, afin d'éviter une image résiduelle sur l'écran. N Conditions optimales pour la modification des pixels Elément TV/AV/Composant/HDMI/PC Horizontal 0~4 4 Vertical 0~4 4 Durée (minute) 1~4 min 4 min◀ ▶ Français N La valeur Modif. pixel peut changer selon le mode et la taille de l’écran. N Cette fonction n'est pas disponible en mode Adapter à écran. ● Temps protection auto (Arrêt / 10 min / 20 min / 40 min / 1 heure): Si l'écran est inutilisé et affiche une image fixe pendant un certain temps défini par l'utilisateur, l'économiseur d'écran est activé de manière à prévenir la formation d'images parasites sur l'écran. ● Défilement: cette fonction supprime les images résiduelles à l'écran en déplaçant tous les pixels sur l'écran, selon le motif. Utilisez cette fonction lorsque des images résiduelles ou des symboles apparaissent à l'écran, en particulier lorsque vous affichez une image fixe à l'écran pendant une longue période. ◀ ▶ Français N La fonction de suppression d'images résiduelles doit être exécutée pendant longtemps (environ une heure) pour supprimer efficacement les images résiduelles. Si l'image résiduelle n'est pas supprimée après l'exécution de cette fonction, répétez l'opération. N Appuyez sur n'importe quelle touche de la télécommande pour annuler cette fonction. ● Gris de bord (Clair / Sombre): si vous regardez la télévision dans un rapport d'écran 4:3, l'écran est protégé contre tout dommage grâce à l'ajustement de la balance des blancs sur les côtés gauche et droit.◀ ▶ Français ■ Général ● Mode Jeu (Arrêt / Activé): lorsque vous connectez une console de jeux, telle qu'une PlayStation™ ou Xbox™, vous pouvez bénéficier d'une expérience ludique encore plus réaliste en sélectionnant le mode Jeu. N Précautions et limitations pour le mode Jeu – Pour déconnecter la console de jeux et connecter un autre périphérique externe, définissez Mode Jeu sur Arrêt dans le menu de configuration. – Si vous affichez le menu du téléviseur en Mode Jeu, l'écran tremble légèrement. N L'option Mode Jeu n'est pas disponible lorsque la source d'entrée est définie sur TV ou PC.◀ ▶ Français N Après avoir connecté la console de jeux, définissez Mode Jeu sur Activé. Malheureusement, il se peut que la qualité d'image soit moins bonne. N Si Mode Jeu est défini sur Activé: – Le mode Image est défini sur Standard et le mode Son est défini sur Cinéma. ● Transparence menu (Lumineux / Sombre): permet de définir la transparence du menu. ● Affich. logo (Arrêt / Activé): affiche le logo Samsung lors de la mise sous tension du téléviseur. ● Nom TV Pour la série PDP 550 / 570  : définit le nom du téléviseur afin que vous puissiez le retrouver aisément sur un appareil mobile. N Si vous sélectionnez Entrée util., vous pouvez écrire sur le téléviseur à l'aide du clavier à l'écran.◀ ▶ Français ■ Anynet+ (HDMI-CEC) Pour plus d'informations sur les options de configuration, reportez-vous à la section "Anynet+(HDMI-CEC)" ■ DivX® Vidéo à la demande Affiche le code d'enregistrement autorisé pour le téléviseur. Si vous vous connectez au site web DivX et que vous vous enregistrez, vous pourrez télécharger le fichier d'enregistrement VOD (vidéo à la demande). Si vous lisez l'enregistrement VOD à l'aide de Vidéos sous SMART HUB, l'enregistrement est terminé. N Pour plus d'informations sur DivX® VOD, rendez-vous sur le site Web "http:// vod.divx.com".◀ ▶ Français ■ Interface commune ● CI Menu: permet à l'utilisateur d'opérer une sélection dans le menu du module CAM. Sélectionnez le CI Menu en fonction du menu Carte PC. ● Infos sur l'application: affiche des informations sur le module CAM inséré dans l'emplacement CI et sur la carte d'interface commune CI ou CI+ insérée dans le module CAM. Vous pouvez installer le module CAM, que le téléviseur soit allumé ou éteint. 1. Vous pouvez acheter un module CI CAM chez le revendeur le plus proche ou le commander par téléphone. 2. Insérez fermement la carte d'interface commune CI ou CI+ dans le module CAM en suivant le sens de la flèche. 3. Insérez le module CAM avec la carte dans la fente de l'interface commune (dans le sens de la flèche), de telle sorte qu'il soit aligné parallèlement à la fente. 4. Vérifiez qu'une image est visible sur une chaîne à signal brouillé.◀ ▶ Français ■ Télécommande réseau (Arrêt / Activé) Pour la série PDP 550 / 570 Permet d'activer / désactiver ou de donner les autorisations d'accès aux téléphones mobiles Samsung. Vous devez disposer d'un appareil / téléphone mobile Samsung prenant en charge la fonction Télécommande réseau. Pour plus d'informations à ce sujet, reportezvous au mode d'emploi qui accompagne l'appareil mobile.◀ ▶ Français ❑ Menu Assistance ■ e-Manual O MENUm → Assistance → ENTERE Vous pouvez lire l'introduction et les instructions relatives aux fonctions de votre TV. N Pour plus d'informations sur l'écran du manuel électronique (e-Manual), reportez-vous à la section "Consultation du manuel électronique" du mode d'emploi.◀ ▶ Français ■ Diagnost. auto. O MENUm → Assistance → ENTERE N Le diagnostic automatique peut prendre quelques minutes ; ce phénomène est normal. ● Test de l'image: utilisez cette option pour rechercher d'éventuels problèmes d'image. Oui: Si l’image couleur n'apparaît pas où si elle est parasitée, sélectionnez Oui. Il se peut que le téléviseur soit défaillant. Contactez le centre d'appel de Samsung pour obtenir de l'aide. Non: si l’image couleur s'affiche correctement, sélectionnez Non. Il se peut que l'équipement externe soit défaillant. Vérifiez les connexions. Si le problème persiste, reportez-vous au mode d'emploi du périphérique externe.◀ ▶ Français ● Test du son: utilisez la mélodie intégrée pour rechercher d'éventuels problèmes sonores. N Si les haut-parleurs du téléviseur restent muets, avant d'effectuer le test du son, vérifiez que l'option Sélection Haut-parleur est définie sur Hautparleur TV dans le menu Son. N La mélodie est diffusée pendant le test, même si l'option Sélection Hautparleur est définie sur Haut-parleur TV ou si le son a été désactivé en appuyant sur le bouton MUTE. Oui: Si, pendant le test du son, vous n'entendez du son que d'un hautparleur ou pas de son du tout, sélectionnez Oui. Il se peut que le téléviseur soit défaillant. Contactez le centre d'appel de Samsung pour obtenir de l'aide. Non: si vous entendez du son des haut-parleurs, sélectionnez Non. Il se peut que l'équipement externe soit défaillant. Vérifiez les connexions. Si le problème persiste, reportez-vous au mode d'emploi du périphérique externe.◀ ▶ Français ● Informations de signal: (chaînes numériques uniquement) Indicateurs d’intensité de signal de réception et de niveau d’erreur. Réglez votre antenne afin d'augmenter l'intensité du signal. ● Résolution des problèmes: consultez cette description s'il vous semble que le téléviseur rencontre un problème. N Si aucun des conseils de dépannage ne s'applique au problème rencontré, contactez le service clientèle de Samsung.◀ ▶ Français ■ Mise à niveau du logiciel La Mise à niveau du logiciel peut être effectuée via une connexion réseau ou en téléchargeant le dernier micrologiciel depuis le site "www.samsung.com" vers une unité de stockage USB. Version actuelle le logiciel déjà installé sur le téléviseur. N Le numéro de version est affiché au format suivant: "année / mois / jour_ version".◀ ▶ Français Installation de la dernière version ● USB: insérez dans le téléviseur un lecteur USB contenant la mise à niveau du micrologiciel, téléchargée depuis le site "www.samsung.com". Veillez à ne pas couper l'alimentation ni à retirer le lecteur USB pendant l'application des mises à niveau. Une fois la mise à niveau du microprogramme terminée, le téléviseur se met automatiquement hors tension, puis se rallume. Lorsque la mise à niveau du logiciel est terminée, les paramètres vidéo et audio par défaut sont réinitialisés. Nous vous recommandons de noter vos réglages pour les rétablir facilement après la mise à niveau. ● L’image affichée peut varier en fonction du modèle. USB◀ ▶ Français ● En ligne Pour les séries PDP 550 et 570  : permet de mettre le logiciel à niveau par Internet. N Commencez par configurer votre réseau. Pour plus d'informations sur l'utilisation de la fonction Config. du réseau, reportez-vous à la section Paramètres réseau. N Si la connexion Internet ne fonctionne pas correctement, il se peut que la connexion soit interrompue. Réessayez le téléchargement. Si le problème persiste, effectuez la procédure de téléchargement USB et procédez à la mise à niveau. ● Canal: met à niveau le logiciel en utilisant le signal de radiodiffusion. N Si la fonction est sélectionnée pendant la période de transmission du logiciel, ce dernier est automatiquement recherché et téléchargé. N Le temps nécessaire au téléchargement du logiciel dépend de l'état du signal.◀ ▶ Français ● Autre logiciel Pour les séries PDP 550 et 570 (sauvegarde): En cas de problème avec le nouveau micrologiciel (si, par exemple, le téléviseur ne fonctionne plus correctement), vous pouvez revenir à la version précédente. N Si le logiciel a été modifié, la version existante s'affiche. ● Mise à niveau en mode veille: une mise à niveau manuelle est automatiquement effectuée à l'heure indiquée. Etant donné que la mise sous tension s'effectue de façon interne, il se peut que l'écran LED s'allume légèrement. Le phénomène peut se poursuivre pendant plus d'une heure jusqu'à ce que la mise à jour du logiciel soit terminée. ■ Contacter Samsung Consultez ces informations si le téléviseur ne fonctionne pas correctement ou si vous souhaitez mettre à niveau le logiciel. Vous y trouverez des informations concernant nos centres d'appels ainsi que la procédure de téléchargement de nos produits et logiciels. ■ Accueil contenu Vous bénéficiez de contenu utile et varié.◀ ▶ Français ❑ Utilisation de la fonction 3D A partir de la série PDP 490 O MENUm → Image → 3D → ENTERE ■ 3D Cette nouvelle fonctionnalité vous permet de regarder du contenu 3D. Pour en profiter pleinement, vous devez acquérir des lunettes 3D Samsung afin de regarder des vidéos 3D. Ces lunettes sont vendues séparément. Pour obtenir des informations d’achat plus détaillées, contactez le revendeur qui vous a vendu ce téléviseur. Fonctions avancées◀ ▶ Français INFORMATIONS IMPORTANTES SUR LA SECURITE ET LA PROTECTION DE LA SANTE CONCERNANT LES FILMS EN 3D. Il est important de lire attentivement et de bien comprendre les informations de sécurité suivantes avant d’utiliser la fonction 3D de votre téléviseur. [ AVERTISSEMENT ● Certaines personnes peuvent être victimes de vertiges, nausées et maux de tête lorsqu’elles regardent la télévision en 3D. Si vous présentez des symptômes de ce type, arrêtez de regarder la télévision en 3D, retirez les lunettes 3D actives et reposez-vous. ● Le fait de regarder des images 3D pendant une période prolongée peut causer une fatigue oculaire. Si vous présentez ce type de symptôme, arrêtez de regarder la télévision en 3D, retirez les lunettes 3D actives et reposezvous.◀ ▶ Français ● Un adulte responsable est censé vérifier régulièrement que tout se passe bien pour les enfants qui utilisent la fonction 3D. Si un enfant vous dit qu’il a les yeux fatigués ou qu’il est victime de maux de tête, de vertiges ou de nausées, demandez-lui d’arrêter de regarder la télévision en 3D et dites-lui de se reposer. ● N’utilisez pas les lunettes 3D actives à d’autres fins (par exemple, comme lunettes de vue, de soleil ou de protection). ● N’utilisez pas la fonction 3D ou les lunettes 3D actives lorsque vous marchez ou vous vous déplacez. Si vous utilisez la fonction 3D ou les lunettes 3D actives lorsque vous vous déplacez, vous pouvez vous occasionner des blessures en trébuchant, en chutant et/ou en percutant des objets.◀ ▶ Français ● Mode 3D: permet de sélectionner le format d’entrée 3D. N Pour profiter pleinement de l’effet 3D, mettez les lunettes actives 3D, puis sélectionnez l’un des modes 3D décrits dans la liste ci-dessous pour obtenir une qualité 3D optimale. N Lorsque vous regardez des images 3D, allumez les lunettes 3D actives. Mode 3D Fonctionnement Arrêt Désactive la fonction 3D. 2D → 3D Transforme une image 2D en image 3D. Côte à côte Affiche deux images côte à côte. Haut et bas Affiche deux images, l’une au-dessus de l’autre.◀ ▶ Français N Certains formats de fichier ne sont pas pris en charge par le mode “2D → 3D”. N Les modes “Cote a cote” et “Haut et bas” sont disponibles lorsque la résolution est définie sur 720p, 1080i et 1080p, en modes DTV, HDMI et USB, ou sur PC lorsque l’ordinateur est connecté via un câble HDMI/DVI. ● Perspective 3D (-5~+5): permet de régler la perspective 3D globale de l’image à l’écran. ● Profondeur (0~10): permet de régler la profondeur globale. ● Modification G/D (Image G/D / Image D/G): intervertit les images gauche et droite. ● 3D → 2D (Arrêt / Activé): affiche uniquement l’image pour l’œil gauche. N Cette fonction est désactivée lorsque Mode 3D est défini sur “2D → 3D” ou sur Arrêt.◀ ▶ Français Résolution prise en charge en mode PC HDMI La résolution en mode PC HDMI est optimisée pour une entrée 1920 x 1080. Une résolution d’entrée différente de 1920 x 1080 ne sera peut-être pas affichée correctement en mode 3D ou en mode plein écran.◀ ▶ Français Visionnage d’une image 3D N La disponibilité de certains modes 3D dépend du format de l’image source. N Pour regarder la télévision en 3D, portez des lunettes 3D actives et appuyez sur le bouton d’alimentation des lunettes. 1. Appuyez sur la touche MENU de votre télécommande, utilisez la touche u ou d pour sélectionner Image, puis appuyez sur ENTERE. 2. Utilisez la touche u ou d pour sélectionner 3D et appuyez ensuite sur ENTERE. ● L’image affichée peut varier en fonction du modèle. 3D Mode 3D : Arret r Perspective 3D : 0 Profondeur : 5 Modification G/D : Image G/D 3D → 2D : Arret EEntrer R Retour◀ ▶ Français 3. Utilisez la touche u ou d pour sélectionner Mode 3D et appuyez ensuite sur ENTERE. 4. A l’aide de la touche l ou r de la télécommande, sélectionnez le Mode 3D de l’image à visionner. ● L’image affichée peut varier en fonction du modèle. Mode 3D U Arrêt L Déplacer EEntrer R Retour◀ ▶ Français Formats pris en charge et spécifications de fonctionnement du format HDMI 3D standard N Les formats 3D indiqués ci-dessous sont recommandés par l’association HDMI et doivent être pris en charge. Format du signal source Norme HDMI 1.4 3D 1920 x 1080p à 24 Hz x 2 1920 x 2205p à 24 Hz 1280 x 720p à 50 Hz x 2 1280 x 1470p à 50 Hz◀ ▶ Français Avant d’utiliser la fonction 3D... N Remarque ● Mode 3D est défini automatiquement sur Arrêt lors de l’accès aux fonctions Mon contenu. ● Le Mode 3D est défini automatiquement sur la valeur de configuration mémorisée en cas de changement de la source d’entrée. ● Certaines fonctions Image sont désactivées en mode 3D. ● Le mode 3D ne prend pas en charge la fonction PIP.◀ ▶ Français ● Il se peut que les lunettes 3D actives d’un modèle antérieur de Samsung (de type IR) ou d’autres fabricants ne soient pas prises en charge. ● Lors de la mise en marche initiale du téléviseur, l’optimisation de l’écran 3D peut prendre quelques instants. ● En cas de proximité avec un autre appareil 3D ou électronique, il est possible que les lunettes 3D actives ne fonctionnent pas correctement. En cas de problème, éloignez aussi loin que possible les autres appareils électroniques des lunettes 3D actives.◀ ▶ Français ● Certains formats de fichier ne sont pas pris en charge par le mode “2D → 3D”. ● Veillez à rester dans l’angle de visualisation et à une distance de visualisation de la télévision optimale lorsque vous regardez des images 3D. ● Sinon, vous risquez de ne pas pouvoir profiter des effets 3D attendus. ● La distance de visualisation idéale doit correspondre à au moins trois fois la hauteur de l’écran. Nous recommandons une position assise où les yeux du spectateur sont au même niveau que l’écran. ● Lorsque vous regardez des images 3D sous une lumière tremblotante comme une lampe fluorescente (50 Hz ~ 60 Hz) ou une lampe à 3 longueurs d’onde, il se peut que l’écran scintille légèrement. Si tel est le cas, atténuez l’intensité de l’éclairage ou éteignez la lumière.◀ ▶ Français ❑ A propos d’AllShare™ à partir de la série PDP 550 AllShare™ connecte votre téléviseur et vos téléphones portables / appareils Samsung compatibles via un réseau. En outre, vous pouvez lire du contenu multimédia (photos, vidéos et musique) enregistré sur votre téléphone portable ou d’autres appareils (un PC, par exemple) en le contrôlant sur le téléviseur via le réseau. N Pour plus d’informations, rendez-vous sur “www.samsung.com” ou contactez le centre d’appel Samsung. Il peut être nécessaire d’installer des logiciels supplémentaires sur l’appareil mobile. Pour plus d’informations, reportez-vous au mode d’emploi de l’appareil concerné.◀ ▶ Français N Si votre téléviseur Samsung est connecté à un serveur DLNA d’une autre marque, une erreur de compatibilité peut survenir lors de la lecture de vidéos. N La connexion de votre téléviseur Samsung à un réseau via AllShare™ vous permet d’utiliser les fonctions originales de Samsung suivantes: – Lecture de différents formats vidéos (DivX, MP4, 3GPP, AVI, ASF, MKV, etc.) – Fonction de vidéo miniature – Fonction de signet (pour la reprise de la lecture d’une vidéo) – Chapitrage automatique (navigation entre les scènes) – Gestion de contenu numérique – Compatibilité avec différents formats de sous-titres (SRT, SMI, SUB, TXT, TTXT) – Recherche sur le nom de fichier – Et plus encore N Pour utiliser toutes les fonctions DLNA originales de Samsung, il est recommandé d’utiliser le logiciel AllShare™ fourni avec votre téléviseur.◀ ▶ Français ❑ Configuration de la fonction AllShare™ à partir de la série PDP 550 O MENUm → Réseau → Paramètres AllShare → ENTERE ■ Paramètres AllShare ● Média (Activé / Arrêt): permet d’activer ou de désactiver la fonction Média. lorsque la fonction Média est activée, la lecture du contenu multimédia peut être contrôlée par un téléphone portable et d’autres appareils prenant en charge la fonction DLNA DMC. ● L’image affichée peut varier en fonction du modèle. Paramètres AllShare Média : Arrêt ► U Dépl. E Enter R Retour◀ ▶ Français ■ Média Affiche la liste des téléphones portables ou appareils connectés qui ont été configurés avec ce téléviseur en vue d’utiliser la fonction Média. N La fonction Média est disponible sur tous les appareils prenant en charge la fonction DLNA DMC. ● Autor. / Refusé: autorise / bloque les appareils. ● Supprimer: supprime les appareils de la liste. N Cette fonction efface simplement le nom de l’appareil de la liste. Si l’appareil effacé s’allume ou tente de se reconnecter au téléviseur, il est possible qu’il s’affiche à nouveau.◀ ▶ Français Utilisation de la fonction Média Une fenêtre d’alarme informe l’utilisateur que le contenu multimédia (vidéos, photos, musique) provenant du téléphone portable va s’afficher sur le téléviseur. Le contenu est lu automatiquement 3 secondes après l’affichage de la fenêtre d’alarme. Si vous appuyez sur le bouton RETURN ou EXIT lorsque la fenêtre d’alarme s’affiche, le contenu multimédia n’est pas lu. N REMARQUE ● S’il s’agit de la première exécution de la fonction Media (Média), la fenêtre contextuelle d’avertissement s’affiche. Appuyez sur le bouton ENTERE pour sélectionner Autor. Vous pourrez ensuite utiliser la fonction Média sur cet appareil.◀ ▶ Français ● Pour désactiver la transmission du contenu multimédia en provenance du téléphone portable, définissez l’option Média sur Arrêt dans le menu Paramètres AllShare. ● En fonction de sa résolution et de son format, le contenu peut ne pas être lu sur le téléviseur. ● Il se peut que les boutons ENTERE et l / r ne fonctionnent pas avec certains types de contenu multimédia. ● Il est possible de contrôler la lecture à l’aide de l’appareil mobile. Pour plus d’informations, reportez-vous au mode d’emploi de l’appareil concerné.◀ ▶ Français ❑ Configuration d’Anynet+ O MENUm → Système → Anynet+ (HDMI-CEC) → ENTERE ■ Anynet+ (HDMI-CEC) Pour utiliser la fonction Anynet+, l’option (Arrêt / Activé) tAnynet+ (HDMI-CEC) doit être définie sur Activé. N Lorsque la fonction Anynet+ (HDMI-CEC) est désactivée, toutes les activités qui y sont associées sont indisponibles.◀ ▶ Français ■ Arrêt automatique (Non / Oui) Configuration de l’arrêt automatique d’un appareil Anynet+ lorsque le téléviseur est mis hors tension. N Si la fonction Arrêt automatique est définie sur Oui, les périphériques externes en cours d’exécution s’éteindront en même temps que le téléviseur. N N’est peut-être pas pris en charge en fonction du périphérique.◀ ▶ Français Qu’est-ce que Anynet+ ? t Anynet+ est une fonction qui vous permet de contrôler tous les appareils Samsung connectés compatibles Anynet+ à l’aide de votre télécommande Samsung. Le système Anynet+ peut être utilisé uniquement avec les appareils Samsung disposant de la fonction Anynet+. Pour être sûr que votre appareil Samsung dispose de cette fonction, vérifiez qu’il comporte le logo Anynet+. N Remarque ● Vous pouvez commander n’importe quel appareil Anynet+ à l’aide de la télécommande, et non des boutons du téléviseur. ● Il se peut que la télécommande du téléviseur ne fonctionne pas dans certaines situations. Dans ce cas, sélectionnez de nouveau le périphérique Anynet+. ● Les fonctions Anynet+ ne sont pas opérationnelles sur les produits d’autres fabricants.◀ ▶ Français Pour plus d’informations sur la méthode de connexion des périphériques externes, consultez le mode d’emploi approprié. N Remarque ● Connectez le câble optique entre la prise DIGITAL AUDIO OUT (OPTICAL) de votre téléviseur et l’entrée Digital Audio (audio numérique) de votre système home cinéma. ● En suivant les instructions de connexion ci-dessus, la prise Optical (Optique) diffuse du son sur 2 canaux uniquement. Vous n’entendrez du son qu’au niveau des haut-parleurs avant, gauche et droit et du caisson de basses de votre système home cinéma. Pour écouter du contenu audio 5.1, branchez la prise DIGITAL AUDIO OUT (OPTICAL) du lecteur DVD ou du décodeur satellite (c’est-à-dire, le périphérique Anynet 1 ou 2) directement sur l’amplificateur ou sur le système home cinéma, et non sur le téléviseur.◀ ▶ Français ● Vous ne pouvez connecter qu’un seul système home cinéma. ● Vous pouvez connecter un appareil Anynet+ à l’aide du câble HDMI. Il se peut que certains câbles HDMI ne prennent pas en charge les fonctions Anynet+. ● Anynet+ fonctionne lorsque l’appareil AV compatible est en veille ou en marche. ● Le système Anynet+ prend en charge jusqu’à 12 appareils AV. Vous pouvez connecter jusqu’à 3 appareils du même type.◀ ▶ Français Menu Anynet+ Le menu Anynet+ varie selon le type et l’état des appareils Anynet+ connectés au téléviseur. Menu Anynet+ Description Voir télévision Fait basculer le mode Anynet+ en mode de diffusion TV. Liste d’appareils Affiche la liste des appareils Anynet+. (nom_appareil) MENU Affiche les menus de l’appareil connecté. Par exemple, si un graveur DVD est connecté, son menu de disque s’affiche. (nom_appareil) Tools Affiche le menu des outils de l’appareil connecté. Par exemple, si un graveur DVD est connecté, son menu de lecture s’affiche. N Ce menu n’est pas disponible avec tous les appareils.◀ ▶ Français Menu Anynet+ Description (nom_appareil) Menu titre Affiche le menu de titres de l’appareil connecté. Par exemple, si un graveur DVD est connecté, son menu de titres s’affiche. N Ce menu n’est pas disponible avec tous les appareils. Récepteur Le son est diffusé par l’intermédiaire du récepteur.◀ ▶ Français ❑ Basculement entre des appareils Anynet+ 1. Appuyez sur le bouton TOOLS pour sélectionner Anynet+ (HDMI-CEC). Appuyez ensuite sur le bouton ENTERE pour sélectionner Liste d’appareils. N Si l’appareil recherché est introuvable, appuyez sur le bouton a pour actualiser la liste. 2. Sélectionnez un appareil et appuyez ensuite sur le bouton ENTERE. Vous pouvez basculer vers l’appareil sélectionné. N Le menu Liste d’appareils s’affiche uniquement lorsque vous définissez l’option Anynet+ (HDMI-CEC) sur Activé dans le menu Système.◀ ▶ Français ● Le basculement vers l’appareil sélectionné peut prendre 2 minutes. Il est impossible d’annuler l’opération de basculement. ● Si vous avez choisi un mode d’entrée externe en appuyant sur le bouton SOURCE, il est impossible d’utiliser la fonction Anynet+. Veillez à basculer vers un appareil Anynet+ à l’aide de la Liste d’appareils.◀ ▶ Français ❑ Ecoute via un récepteur Vous pouvez diffuser du son via un récepteur (c’est-à-dire un système home cinéma) au lieu du Haut-parleur TV. 1. Sélectionnez Récepteur et définissez l’option sur Activé. 2. Appuyez sur le bouton EXIT pour quitter le menu. N Si votre récepteur ne prend en charge que l’audio, il se peut qu’il ne figure pas dans la liste d’appareils. N Le récepteur fonctionnera lorsque vous aurez correctement raccordé la prise d’entrée optique du récepteur à la prise DIGITAL AUDIO OUT (OPTICAL) du téléviseur.◀ ▶ Français N Lorsque le récepteur (système home cinéma) est activé, vous pouvez écouter le son sortant de la prise optique du téléviseur. Lorsque le téléviseur reçoit une émission avec le son 5.1, il diffuse un son 5.1 canaux vers le récepteur. Si la source est un composant numérique (un lecteur DVD, par exemple) connecté au téléviseur via HDMI, seul un son 2 canaux est diffusé par le récepteur.◀ ▶ Français ❑ Résolution des problèmes Anynet+ Problème Solution possible Anynet+ ne fonctionne pas. • Vérifiez que l’appareil est compatible Anynet+. Le système Anynet+ ne prend en charge que les appareils compatibles Anynet+. • Un seul récepteur (home cinéma) peut être connecté. • Vérifiez que le cordon d’alimentation de l’appareil Anynet+ est bien connecté. • Vérifiez la connexion des câbles vidéo/audio/HDMI du périphérique Anynet+. • Vérifiez que l’option Anynet+ (HDMI-CEC) est définie sur Activé dans le menu de configuration d’Anynet+. • Vérifiez que la télécommande du téléviseur est en mode TV. • Vérifiez que la télécommande est compatible avec Anynet+. • Anynet+ ne fonctionne pas dans toutes les conditions. (Recherche de chaînes, utilisation de Mon contenu ou Plug & Play (configuration initiale), etc.) • Lorsque vous branchez ou retirez le câble HDMI, veillez à relancer une recherche d’appareils ou à éteindre et rallumer votre téléviseur. • Vérifiez que la fonction Anynet+ de l’appareil Anynet+ est activée.◀ ▶ Français Problème Solution possible Je veux démarrer Anynet+. • Assurez-vous que le périphérique Anynet+ est bien connecté au téléviseur et que la fonction Anynet+ (HDMI-CEC) est définie sur Activé dans le menu de configuration d’Anynet+. • Appuyez sur le bouton TOOLS pour afficher le menu Anynet+ et sélectionnez le menu de votre choix. Je veux quitter Anynet+. • Sélectionnez Voir télévision dans le menu Anynet+. • Appuyez sur le bouton SOURCE de la télécommande et choisissez un appareil non compatible Anynet+. Le message “Connexion à Anynet+...” apparaît à l’écran. • Il est impossible d’utiliser la télécommande lorsque vous configurez Anynet+ ou basculez vers un mode d’affichage. • La télécommande n’est utilisable qu’au terme de la configuration d’Anynet+ ou du passage vers un mode d’affichage. La lecture ne démarre pas sur l’appareil Anynet+. • Vous ne pouvez pas utiliser la fonction de lecture lorsque Plug & Play (configuration initiale) est en cours.◀ ▶ Français Problème Solution possible Le périphérique connecté ne s’affiche pas. • Vérifiez que l’appareil est compatible avec les fonctions Anynet+. • Vérifiez que le câble HDMI est bien connecté. • Vérifiez que l’option Anynet+ (HDMI-CEC) est définie sur Activé dans le menu de configuration d’Anynet+. • Lancez une nouvelle recherche d’appareils Anynet+. • Vous pouvez uniquement connecter un appareil Anynet+ à l’aide du câble HDMI. Il se peut que certains câbles HDMI ne prennent pas en charge les fonctions Anynet+. • Si la connexion est interrompue à cause d’une coupure de courant ou parce que le câble HDMI a été déconnecté, effectuez une nouvelle recherche d’appareils. Le son du téléviseur n’est pas diffusé par le récepteur. • Connectez le téléviseur au récepteur à l’aide du câble optique.◀ ▶ Français ❑ Utilisation de Mon contenu Profitez des photos, des fichiers musicaux et/ou des films enregistrés sur un périphérique de stockage de masse USB de la classe MSC. 1. Appuyez sur le bouton CONTENT. 2. Appuyez sur le bouton u / d / l / r pour sélectionner le menu de votre choix Vidéos, Photos, Musique et appuyez ensuite sur ENTERE. ● L’image affi chée peut varier en fonction du modèle. Vidéos Photos Musique Source Regarder TV Mon contenu◀ ▶ Français ❑ Connexion d’un périphérique USB 1. Allumez votre téléviseur. 2. Connectez un périphérique USB contenant des photos, des fichiers musicaux et/ou des films au port USB sur le côté du téléviseur. 3. Lorsqu’un périphérique USB est connecté au téléviseur, une fenêtre contextuelle s’ouvre. Vous pouvez alors sélectionner Nv. périph. conn.. ● L’image affichée peut varier en fonction du modèle. USB◀ ▶ Français N Il se peut que le fonctionnement ne soit pas correct avec des fichiers multimédias sans licence. N Ce qu’il faut savoir avant d’utiliser la fonction Mon contenu ● Le protocole MTP (Media Transfer Protocol) n’est pas pris en charge. ● Le système de fichiers prend en charge les formats FAT16, FAT32 et NTFS. ● Il est possible que certains types d’appareils photo numériques et de périphériques audio USB ne soient pas compatibles avec ce téléviseur. ● Mon contenu one prend en charge que les périphériques de stockage de masse USB de la catégorie MSC. Pour la série PDP 550 / 570 Cette dernière est dédiée aux périphériques de transport de masse uniquement. Il s’agit notamment des clés USB, lecteurs de cartes Flash et disques durs USB (les Hub USB ne sont pas pris en charge). Les périphériques doivent être connectés directement au port USB du téléviseur. ● L’utilisation d’un Hub USB n’est pas prise en charge. Pour la série PDP 450 / 490 ◀ ▶ Français ● Avant de connecter l’appareil au téléviseur, sauvegardez vos fichiers afin d’éviter qu’ils ne soient endommagés ou que des données ne soient perdues. SAMSUNG ne saurait, en aucun cas, être tenue responsable de la perte de données ou de l’endommagement d’un fichier de données. ● Ne déconnectez pas le périphérique USB en cours de chargement. ● Plus la résolution de l’image est élevée, plus le temps d’affichage à l’écran sera long. ● La résolution JPEG maximale prise en charge est de 15360 x 8640 pixels. ● Pour les fichiers non pris en charge ou endommagés, le message “Format de fichier inconnu” s’affiche. ● Si le critère de tri est défini sur Aff. de base, il est possible d’afficher jusqu’à 1000 fichiers dans chaque dossier. ● Si le nombre de fichiers et dossiers enregistrés sur un périphérique de stockage USB est supérieur à environ 4000, certains peuvent ne pas apparaître et certains dossiers sont susceptibles de ne pas pouvoir être ouverts.◀ ▶ Français ● Les fichiers MP3 avec gestion des droits numériques (DRM) téléchargés à partir d’un site payant ne peuvent pas être lus. La technologie de gestion des droits numériques (DRM) prend en charge la création, la distribution et la gestion du contenu de manière intégrée et complète, y compris la protection des droits et des intérêts des fournisseurs de contenu, la prévention de la copie illégale du contenu, ainsi que la gestion de la facturation et des règlements. ● Si plusieurs périphériques PTP sont connectés, vous ne pouvez en utiliser qu’un à la fois. ● Si plusieurs périphériques MSC sont connectés, il se peut que certains d’entre eux ne soient pas reconnus. Un périphérique USB nécessitant beaucoup de puissance (plus de 500mA / 5V) ne sera peut-être pas pris en charge. ● Si un message d’avertissement de surcharge s’affiche lorsque vous connectez ou utilisez un périphérique USB, il se peut que le périphérique ne soit pas reconnu ou qu’il fonctionne mal.◀ ▶ Français ● Si aucune entrée n’a été reçue au cours de la période définie dans le paramètre Temps protection auto, l’économiseur d’écran s’active. ● Le mode d’économie d’énergie de certains disques durs externes peut être désactivé automatiquement lors d’une connexion au téléviseur. ● Si un câble d’extension USB est utilisé, il se peut que le périphérique USB ne soit pas reconnu ou que les fichiers qui y sont stockés ne soient pas lus. ● Si un périphérique USB connecté au téléviseur n’est pas reconnu, si la liste des fichiers qui y sont stockés est corrompue ou si un fichier de la liste est illisible, connectez le périphérique en question à l’ordinateur, formatez le périphérique et vérifiez la connexion. ● Si un fichier supprimé depuis le PC apparaît encore lors de l’utilisation de Mon contenu, utilisez la fonction “Vider la Corbeille” de l’ordinateur pour supprimer définitivement ce fichier.◀ ▶ Français ❑ Affichage Accédez au fichier souhaité à l’aide des boutons l / r / u / d, puis appuyez sur le bouton ENTERE ou � (Lecture). La lecture du fichier commence. L’écran Mon contenu peut varier en fonction du mode d’accès utilisé. Information: Affiche la catégorie contente choisie (la Musique, par exemple), l’artifice (Le trajet d’USB, par exemple), le nom de chemise / dossier, la page, et critères de sorte. Mode Contenu / Nom périph.: Vous pouvez choisir la Catégorie Contente désirée ou l’Artifice. Boutons d’opération: ● { Jaune (mode Edit): Vous permet de choisir la musique en vérifiant les dossiers que vous voulez jouer. Seulement disponible dans la Musique. ● � / µ (Page): permet de passer à la page suivante ou précédente. ● T Outils: affiche le menu d’options. ● R Retour: permet de passer à l’étape précédente.. Section Liste des fichiers: Les dossiers d’étalages ou les chemises classées selon les critères vous pouvez choisir. { Mode édit. T Outils R Retour Musique | SUM ⁄ Folder Name > File Name 1/100 pages Vue Dossier Musique_3 Pas de chanteur Musique_4 Pas de chanteur Musique_2 Pas de chanteur Musique_5 Pas de chanteur Musique_6 Pas de chanteur Musique_7 Pas de chanteur Musique_8 Pas de chanteur Musique_9 Pas de chanteur Musique_10 Pas de chanteur Musique_1 Pas de chanteur◀ ▶ Français ■ Vidéos Lecture de vidéos 1. Appuyez sur le bouton l / r / u / d pour sélectionner la vidéo de votre choix dans la liste. 2. Appuyez sur le bouton ENTERE ou � (Lecture). – Le fichier sélectionné s’affiche en haut de l’écran, avec le temps de lecture. – Si les informations sur la durée de la vidéo sont inconnues, la durée de lecture et la barre de progression ne s’affichent pas. ● L’image affichée peut varier en fonction du modèle. L Passer T Outils R Retour◀ ▶ Français – Pendant la lecture vidéo, vous pouvez effectuer des recherches à l’aide des boutons l et r. – Vous pouvez utiliser les boutons � (retour rapide) et µ (avance rapide) en cours de lecture. N Ce mode vous permet de profiter des séquences vidéo d’un jeu vidéo, mais pas de jouer au jeu proprement dit. ● Formats de sous-titres pris en charge Nom Extension de fichier Format Texte temporel MPEG-4 .ttxt XML SAMI .smi HTML SubRip .srt chaînes SubViewer .sub chaînes Micro DVD .sub ou .txt chaînes◀ ▶ Français ● Formats vidéo pris en charge Extension de fichier Conteneur Codec vidéo Résolution Fréquence d’images (i / s) Débit binaire (Mbit / s) Codec audio *.avi *.mkv AVI MKV DivX 3.11/4.x/5.1/6.0 1920 x 1080 6 ~ 30 8 MP3 / AC3 / LPCM / ADPCM / DTS Core H.264 BP/MP/HP 1920 x 1080 6 ~ 30 25 MPEG4 SP / ASP 1920 x 1080 6 ~ 30 8 Motion JPEG 640 x 480 6 ~ 30 8 *.asf ASF DivX 3.11/4.x/5.1/6.0 1920 x 1080 6 ~ 30 8 MP3 / AC3 / LPCM / ADPCM / WMA H.264 BP/MP/HP 1920 x 1080 6 ~ 30 25 MPEG4 SP / ASP 1920 x 1080 6 ~ 30 8 Motion JPEG 640 x 480 6 ~ 30 8 *.wmv ASF Window Media Video v9 1920 x 1080 6 ~ 30 25 WMA *.mp4 MP4 H.264 BP/MP/HP 1920 x 1080 6 ~ 30 25 MP3 / ADPCM / MPEG4 SP / ASP 1920 x 1080 6 ~ 30 8 AAC◀ ▶ Français Extension de fichier Conteneur Codec vidéo Résolution Fréquence d’images (i / s) Débit binaire (Mbit / s) Codec audio *.3gp 3GPP H.264 BP/MP/HP 1920 x 1080 6 ~ 30 25 ADPCM / AAC / HEAAC MPEG4 SP / ASP 1920 x 1080 6 ~ 30 8 *.vro VRO VOB MPEG1 1920 x 1080 24 / 25 / 30 30 AC3 / MPEG MPEG2 1920 x 1080 24 / 25 / 30 30 / LPCM *.mpg, *.mpeg PS MPEG1 1920 x 1080 24 / 25 / 30 30 AC3 / MPEG / LPCM / AAC MPEG2 1920 x 1080 24 / 25 / 30 30 H.264 1920 x 1080 6 ~ 30 25 *.ts *.tp *.trp TS MPEG2 1920 x 1080 24 / 25 / 30 30 AC3 / AAC / MP3 / DD+ / HE-AAC H.264 1920 x 1080 6 ~ 30 25 VC1 1920 x 1080 6 ~ 30 25◀ ▶ Français Décodeur vidéo Décodeur audio • Prise en charge jusqu’à la norme H.264, Level 4.1 • Les normes H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 et AVCHD ne sont pas prises en charge. • MPEG4 SP, ASP : − Résolution inférieure à 1280 x 720 : 60 images max. − Résolution supérieure à 1280 x 720 : 30 images max. • GMC n’est pas pris en charge. • Prise en charge jusqu’à WMA 7, 8, 9, STD • WMA 9 PRO ne prend pas en charge l’audio deux canaux, multicanaux ou sans perte. • Le taux d’échantillonnage WMA 22 050 Hz mono n’est pas pris en charge.◀ ▶ Français Autres restrictions N Remarque ● Le contenu vidéo ne sera pas lu, ou ne sera pas lu correctement, si une erreur est présente dans le contenu ou sur le suport. ● Il se peut que le son ou la vidéo ne fonctionne pas si le contenu présente un débit binaire / une fréquence d’images standard supérieur aux taux d’images par seconde repris dans le tableau ci-dessus. ● Si une erreur survient dans la table d’index, la fonction de recherche (passer) n’est pas prise en charge. ● Il est possible que la lecture d’un fichier vidéo via une connexion réseau soit saccadée. Pour la série PDP 550 / 570 ● Le contenu vidéo ne peut pas être lu si plusieurs contenus existent dans un fichier. ● Certaines périphériques USB / caméra numériques peuvent ne pas être compatibles avec la lecture. ● Si vous lisez une vidéo sur une connexion réseau, des saccades risquent d’apparaître.◀ ▶ Français ■ Musique Lecture de musique 1. Appuyez sur le bouton l / r / u / d pour sélectionner le fichier musical de votre choix dans la liste. 2. Appuyez sur le bouton ENTERE ou � (Lecture). – Vous pouvez utiliser les boutons � (retour rapide) et µ (avance rapide) en cours de lecture. ● L’image affichée peut varier en fonction du modèle. E Pause L Page T Outils R Retour Musique SUM 1/2◀ ▶ Français N Seuls les fichiers portant l’extension MP3 sont affichés. Les fichiers portant d’autres extensions ne s’affichent pas, même s’ils sont enregistrés sur le même périphérique USB. N Si le son est déformé lors de la lecture de fichiers MP3, réglez l’option Egaliseur dans le menu Son. (Un fichier MP3 surmodulé peut être à l’origine d’un problème sonore.)◀ ▶ Français Lecture des fichiers musicaux sélectionnés 1. Appuyez sur le bouton { (Mode édit.). 2. Sélectionnez le fichier musical de votre choix. N Le symbole c s’affiche à gauche des fichiers sélectionnés. 3. Appuyez sur le bouton TOOLS et sélectionnez ensuite Lire contenu sélectionné. N Vous pouvez sélectionner ou désélectionner toute la musique en appuyant sur Sélectionner tout / Désélectionner tout. ◀ ▶ Français ■ Photos Visualisation d’une photo (ou d’un diaporama) 1. Appuyez sur le bouton l / r / u / d pour sélectionner la photo de votre choix dans la liste. 2. Appuyez sur le bouton ENTERE. ● Lorsqu’une photo sélectionnée est affichée, appuyez sur le bouton ENTERE pour lancer le diaporama. ● Pendant le diaporama, tous les fichiers de la liste sont affichés dans l’ordre. ● Le diaporama démarre automatiquement lorsque vous appuyez sur le bouton � (Lecture) dans la liste des fichiers. ● L’image affichée peut varier en fonction du modèle. E Pause L Précéd. /Suivant T Outils R Retour Normal◀ ▶ Français N Des fichiers musicaux peuvent être lus automatiquement pendant le diaporama, si l’option Fond musical est définie sur Activé. N Il n’est pas possible de changer le Fond musical tant que le chargement de la musique de fond n’est pas terminé.◀ ▶ Français ❑ Mon contenu - Fonctions supplémentaires Menu d’options pour la lecture de Vidéos / Musique / Photos Pendant la lecture d’un fichier, appuyez sur le bouton TOOLS. Catégorie Fonctionnement Vidéos Musique Photos Recherche titre Vous permet de passer directement à un autre titre. c Recher. temps Vous pouvez parcourir le film à l’aide des boutons l et r par intervalles de 10 secondes. c Mode aléatoire Vous pouvez lire les fichiers musicaux de manière aléatoire. c Mode Répétition Vous pouvez lire des fichiers musicaux et vidéo en boucle. c c Format de l’image Vous permet de régler la taille de l’image en fonction de vos préférences. c◀ ▶ Français Catégorie Fonctionnement Vidéos Musique Photos Mode Image Vous pouvez régler les paramètres d’image. c c Mode Son Vous pouvez régler les paramètres sonores. c c c Langue des soustitres Vous pouvez afficher des soustitres. Vous pouvez sélectionner une langue de sous-titrage spécifique si le fichier en contient plusieurs. c Param. de sous-titre Vous pouvez visionner la vidéo avec des sous-titres. Cette fonction n’est opérationnelle que si les sous-titres possèdent le même nom de fichier que la vidéo. c◀ ▶ Français Catégorie Fonctionnement Vidéos Musique Photos Audio Vous pouvez regarder une vidéo dans une des langues prises en charge. Cette fonction n’est active que lors de la lecture de fichiers de type streaming prenant en charge plusieurs formats audio. c Lancer le diaporama / Suspendre diaporama Vous pouvez lancer ou suspendre la lecture d’un diaporama. c Vit. diaporama Vous pouvez sélectionner la vitesse du diaporama pendant sa diffusion. c Fond musical Vous pouvez activer/désactiver le fond musical d’un diaporama. c Paramètres de musique de fond Vous pouvez sélectionner le fond musical d’un diaporama. c◀ ▶ Français Catégorie Fonctionnement Vidéos Musique Photos Zoom Vous pouvez zoomer sur les images lorsque vous êtes en mode Plein écran. c Pivoter Vous pouvez faire pivoter les images lorsque vous êtes en mode Plein écran. c Information Vous pouvez afficher des informations détaillées sur le fichier lu. c c c◀ ▶ Français ❑ Fonction télétexte La page d’index du télétexte contient des instructions sur l’utilisation du service. Pour que les informations du télétexte s’affichent correctement, la réception des chaînes doit être stable. Autrement, des informations pourraient manquer ou certaines pages ne pas s’afficher. N Vous pouvez changer de page de télétexte en appuyant sur les boutons numériques de la télécommande. Informations supplémentaires◀ ▶ Français / (Télétexte activé / mixte / désactivé) Active le mode télétexte pour la chaîne choisie. Appuyez deux fois sur ce bouton pour superposer le mode Télétexte à l’émission en cours de diffusion. Appuyez sur le bouton une nouvelle fois pour quitter le système télétexte. 8 (mémoriser) Permet d’enregistrer les pages de télétexte. 4 (taille) Permet d’afficher la moitié supérieure de l’écran en caractères deux fois plus grands. Pour afficher le texte dans la moitié inférieure de l’écran, appuyez une nouvelle fois sur ce bouton. Pour rétablir l’affichage normal, appuyez dessus une fois de plus. 9 (en attente) Arrête l’affichage sur la page en cours, au cas où plusieurs pages supplémentaires suivraient automatiquement. Pour annuler, appuyez de nouveau sur cette touche.◀ ▶ Français Boutons de couleur (rouge, vert, jaune, bleu) Si la société de radiodiffusion utilise le système FASTEXT, les différents sujets traités dans la page télétexte disposent d’un code couleur et peuvent être sélectionnés à l’aide des boutons de couleur de la télécommande. Appuyez sur la couleur correspondant au sujet de votre choix. Une nouvelle page avec code couleur est affichée. Les éléments peuvent être sélectionnés de la même manière. Pour afficher la page précédente ou la page suivante, appuyez sur le bouton de couleur correspondant. 0 (mode) Permet de sélectionner le mode Télétexte (LIST / FLOF). Si vous appuyez sur ce bouton alors que le mode LIST est sélectionné, il passe en mode d’enregistrement de liste. Dans ce mode, vous pouvez enregistrer une page télétexte dans une liste à l’aide du bouton 8 (mémoriser). 1 (page secondaire) (taille) Permet d’afficher une page secondaire. 2 (haut de page) Permet d’afficher la page suivante du télétexte.◀ ▶ Français 3 (bas de page) Permet d’afficher la page précédente du Télétexte. 6 (index) Permet d’afficher la page d’index du télétexte (sommaire). 5 (afficher) Affiche le texte masqué (les réponses à un questionnaire, par exemple). Pour rétablir le mode d’affichage normal, appuyez de nouveau sur ce bouton. 7 (annuler) Réduit l’écran télétexte pour le superposer à l’émission en cours.◀ ▶ Français Page de Télétexte type Catégorie Contenu A Numéro de la page sélectionnée. B Identité de la chaîne émettrice. C Numéro de la page actuelle ou indications de recherche. D Date et heure. E Texte. F Informations sur l’état. Informations FASTEXT.◀ ▶ Français ❑ Résolution des problèmes Si vous avez des questions sur le téléviseur, commencez par consulter la liste ci-dessous. Si aucune de ces solutions de dépannage ne s’applique à votre problème, rendez-vous sur le site “www.samsung.com”, puis cliquez sur Assistance ou contactez le centre d’appels, dont les coordonnées figurent sur la dernière page de ce manuel. Problèmes Solutions et explications Qualité de l’image • Exécutez tout d’abord le Test de l’image pour vérifier que votre téléviseur affiche correctement l’image de test. (accédez au mode MENU - Assistance - Diagnost. auto. - Test de l’image) Si l’image de test s’affiche correctement, sa qualité médiocre peut être due à la source ou au signal. La qualité de l’image affichée par le téléviseur n’est pas aussi bonne que dans le magasin. • Si vous possédez un décodeur câble/boîtier décodeur analogique, passez à un décodeur numérique. Utilisez des câbles HDMI ou Composant pour fournir une qualité d’image HD (high definition). • Abonnés câble / satellite: essayez les chaînes HD dans la liste des canaux. • Connexion de l’antenne: essayez les chaînes HD après avoir effectué une mémorisation automatique.◀ ▶ Français Problèmes Solutions et explications L’image est déformée : erreur macrobloc, petit bloc, points, pixelisation. • La compression de contenu vidéo peut engendrer une déformation de l’image, en particulier pour les mouvements rapides comme le sport et les films d’action. • Un niveau de signal faible ou de mauvaise qualité peut déformer l’image. Il ne s’agit pas d’un problème lié au téléviseur. • Utiliser un téléphone portable à proximité d’un téléviseur (jusqu’à 1 m environ) peut constituer une source de parasites visuels sur les téléviseurs analogiques et numériques. Couleur incorrecte ou manquante. • Si vous utilisez une connexion Composant, vérifiez que les câbles sont connectés aux prises adéquates. Des raccordements desserrés ou incorrects peuvent engendrer des problèmes au niveau de la couleur ou un écran vide. La couleur ou la luminosité est de mauvaise qualité. • Réglez les options Image dans le menu du téléviseur (accédez au mode Image / Couleur / Luminosité / Netteté). • Réglez l’option Mode éco. dans le menu du téléviseur (accédez à MENU – Système – Solution Eco – Mode éco.). • Essayez de réinitialiser l’image pour afficher ses paramètres par défaut (accédez à MENU - Image - Réinitialisation de l’image).◀ ▶ Français Problèmes Solutions et explications Il y a une ligne pointillée sur les bords de l’écran. • Si le format de l’image est défini sur Adapter à écran, réglez le paramètre sur 16:9. • Changez la résolution du décodeur câble / satellite. L’image est en noir et blanc. • Si vous utilisez une entrée composite AV, connectez le câble vidéo (jaune) au connecteur vert de l’entrée Composant 1 du téléviseur. Lors d’un changement de chaîne, l’image se bloque, est déformée ou s’affiche avec un léger décalage. • En cas de raccordement avec le décodeur câble, essayez de réinitialiser ce dernier (rebranchez le cordon d’alimentation secteur et patientez jusqu’au redémarrage du décodeur câble. Cette opération peut durer jusqu’à 20 minutes). • Réglez la résolution de sortie du décodeur câble sur 1080i ou 720p. Qualité sonore Exécutez tout d’abord le Test du son pour vérifier que le système audio de votre téléviseur fonctionne correctement. (Accédez à MENU - Assistance - Diagnost. auto. - Test du son.) Si le système audio fonctionne correctement (OK), le problème lié au son peut provenir de la source ou du signal. Il n’y a aucun son ou celuici est trop faible au volume maximum. • Vérifiez le volume du périphérique (décodeur câble/boîtier décodeur, DVD, Blu-ray, etc.) connecté à votre téléviseur.◀ ▶ Français Problèmes Solutions et explications La qualité d’image est bonne, mais aucun son n’est émis. • Réglez l’option Sélection Haut-parleur sur Haut-parleur TV dans le menu Son. • Si vous utilisez un appareil externe, assurez-vous que les câbles audio sont raccordés aux prises d’entrée audio appropriées du téléviseur. • Si vous utilisez un périphérique externe, vérifiez l’option de sortie audio du périphérique. (Par exemple, il se peut que vous deviez remplacer l’option audio de votre décodeur câble par HDMI si vous utilisez la connexion HDMI.) • Si vous utilisez un câble DVI-HDMI, un câble audio distinct est requis. • Si votre téléviseur est équipé d’une prise casque, assurez-vous que rien n’y est connecté. • Redémarrez le périphérique connecté en rebranchant le câble d’alimentation du périphérique. Les haut-parleurs émettent un son inhabituel. • Vérifiez les connexions des câbles. Vérifiez qu’aucun câble vidéo n’est raccordé à une entrée audio. • Pour les connexions de l’antenne ou du câble, vérifiez l’intensité du signal. Un niveau de signal faible peut provoquer une distorsion sonore.◀ ▶ Français Problèmes Solutions et explications Aucune image, aucune vidéo Le téléviseur s’éteint automatiquement. • Vérifiez que la fonction Veille est réglée sur Arrêt dans le menu Système. • Si votre PC est connecté au téléviseur, vérifiez les paramètres d’alimentation de votre PC. • Vérifiez que le cordon d’alimentation secteur est branché correctement sur la prise murale et sur le téléviseur. • Lorsque vous regardez la télévision à partir d’une antenne ou d’une connexion avec câble, le téléviseur s’éteint après 10 à 15 minutes s’il ne reçoit aucun signal. Connexion RF (câble / antenne) Le téléviseur ne reçoit pas toutes les chaînes. • Vérifiez que le câble coaxial est raccordé correctement. • Essayez la fonction Plug & Play (configuration initiale) pour ajouter des chaînes disponibles à la liste. Accédez à MENU - Système - Plug & Play (configuration initiale) et attendez que toutes les chaînes disponibles soient mémorisées. • Vérifiez que l’antenne est positionnée correctement. L’image est déformée : erreur macrobloc, petit bloc, points, pixelisation. • La compression de contenu vidéo peut provoquer une déformation de l’image, en particulier pour les mouvements rapides comme le sport et les films d’action. • Un niveau de signal faible peut déformer l’image. Ce n’est pas un problème lié au téléviseur.◀ ▶ Français Problèmes Solutions et explications Connexion PC Le message “Mode non pris en charge” est affiché. • Réglez la résolution de sortie de votre PC de telle sorte qu’elle corresponde aux résolutions prises en charge par le téléviseur. “PC” reste affiché dans la liste Source, même si aucun ordinateur n’est connecté. • Cela est tout à fait normal ; la mention “PC” apparaît toujours dans la liste Source. La qualité de la vidéo est bonne, mais aucun son n’est émis. • Si vous utilisez une connexion HDMI, vérifiez le paramètre de sortie audio sur votre PC. Connexion réseau Pour les séries PDP 550 et 570 La connexion au réseau sans fil a échoué. • La clé USB sans fil Samsung est requise pour utiliser un réseau sans fil. • Assurez-vous que le paramètre de connexion réseau est défini sur Sans fil. • Assurez-vous que le téléviseur est connecté à un routeur IP sans fil.◀ ▶ Français Problèmes Solutions et explications Autres L’image ne s’affiche pas en mode plein écran. • Des barres noires s’affichent de chaque côté des chaînes HD lors de l’affichage de contenu SD (4:3) mis à niveau. • Des barres noires s’affichent en haut et en bas des films dont le format d’image est différent de celui de votre téléviseur. • Définissez les options de format d’image de votre appareil externe ou téléviseur sur Plein écran. Le téléviseur à écran plasma émet un bourdonnement. • En règle générale, les téléviseurs à écran plasma émettent un léger bourdonnement. Cela est tout à fait normal ! Ce bruit résulte des charges électriques qui sont utilisées pour créer les images sur l’écran. • Si le bourdonnement est fort, il se peut que la luminosité que vous avez réglée soit trop élevée. Essayez de réduire la luminosité. • Le bourdonnement peut également être provoqué par une trop grande proximité entre un mur ou une autre surface dure et l’arrière de votre téléviseur à écran plasma. Vous pouvez également essayer de réacheminer vos câbles de connexion. • Une installation incorrecte de la fixation murale peut créer un bruit excessif.◀ ▶ Français Problèmes Solutions et explications Problème de rémanence de l’image (brûlures). • Pour réduire le risque de brûlure d’écran, cet écran est équipé d’une technologie de réduction des brûlures. Cette technologie (Pixel Shift) permet de régler le mouvement de l’image de bas en haut (ligne verticale) et de gauche à droite (point horizontal). Le message “Mode non pris en charge” est affiché. • Vérifiez la résolution prise en charge du téléviseur et réglez la résolution de sortie de l’appareil externe en conséquence. Reportez-vous aux paramètres de résolution indiqués dans le manuel utilisateur. Une odeur de plastique se dégage du téléviseur. • Cette odeur est normale et s’atténuera avec le temps. L’option Informations de signal du téléviseur n’est pas disponible dans le menu de test du diagnostic automatique. • Cette fonction n’est disponible qu’avec des chaînes numériques diffusées sur une connexion d’antenne/RF/coaxiale. Le téléviseur penche sur le côté. • Retirez le support de base du téléviseur et remontez-le. Le menu des chaînes est grisé (indisponible). • Le menu Canal n’est disponible que si la source TV est sélectionnée.◀ ▶ Français Problèmes Solutions et explications Vos paramètres sont perdus après 30 minutes ou à chaque mise hors tension du téléviseur. • Si le téléviseur est en mode Enr. démo, les paramètres audio et vidéo sont réinitialisés toutes les 30 minutes. Remplacez le mode Enr. démo en Util. domicile dans la procédure Plug & Play. Appuyez sur le bouton SOURCE pour sélectionner le mode TV et accédez à MENU → Système → Plug & Play → ENTERE. Perte intermittente du signal audio ou vidéo. • Vérifiez le raccordement des câbles ; rebranchez-les au besoin. • Une perte de l’image ou du son peut être provoquée par l’utilisation de câbles trop rigides ou épais. Veillez à ce que les câbles soient suffisamment souples pour une utilisation à long terme. En cas d’installation du téléviseur en position murale, nous vous recommandons d’utiliser des câbles avec des connecteurs de 90 degrés. Des petites particules sont visibles lorsque vous observez de près le bord du cadre du téléviseur. • Elles font partie de la conception du produit et ne constituent pas un défaut.◀ ▶ Français Problèmes Solutions et explications Message “Scramble signal” ou “Weak Signal / No Signal”. • Si vous utilisez une CARTE CAM (CI / CI+), vérifiez qu’elle est installée dans la fente de l’interface commune. • Si le problème persiste, retirez la CARTE CAM du téléviseur et réintroduisez-la dans la fente. Le menu PIP n’est pas disponible. • La fonctionnalité PIP n’est disponible que lorsque vous utilisez une source HDMI, PC ou Composant. Le téléviseur s’est rallumé 45 minutes après sa mise hors tension. • Cela est tout à fait normal. Le téléviseur exécute, en effet, la fonction de liaison radio (OTA) pour mettre à niveau le microprogramme téléchargé au cours de son utilisation. Problèmes récurrents liés à l’image/au son. • Vérifiez et modifiez le signal/la source. Il peut y avoir une réaction entre les coussinets en caoutchouc situés sur le support de base et la finition de certains meubles. • Pour éviter que cela ne se produise, utilisez des coussinets de feutre sur toute surface du téléviseur en contact direct avec un meuble.◀ ▶ Français N Certaines des images et des fonctions ci-dessus sont uniquement disponibles sur des modèles spécifiques. N Vous pouvez maintenir votre téléviseur dans des conditions optimales en le mettant à niveau avec le dernier micrologiciel (samsung.com → Support → Downloads) par le biais d’un périphérique USB.◀ ▶ Français ❑ Fente INTERFACE COMMUNE pour les connexions Pour regarder les chaînes payantes, la carte d’interface commune (CI (CI+) CARD) doit être insérée. ● Si vous ne l’insérez pas, certaines chaînes afficheront le message “Signal brouillé”. ● Les informations de pairage contenant un numéro de téléphone, l’ID de la carte d’interface commune (CI ou CI+), l’ID de l’hôte et d’autres informations s’afficheront après 2 ou 3 minutes. Si, message d’erreur s’affiche, contactez votre fournisseur d’accès. ● Lorsque la configuration des informations sur les canaux est terminée, le message “Mise à jour terminée” s’affiche, indiquant que la liste des chaînes est mise à jour.◀ ▶ Français N Remarque ● Vous devez vous procurer une carte d’interface commune (CI(CI+) CARD) auprès d’un fournisseur local de diffusion. ● Lorsque vous sortez la carte d’interface commune (CI(CI+) CARD), tirez-la délicatement. Une chute pourrait en effet l’endommager. ● Insérez la carte d’interface commune (CI(CI+) CARD) dans le sens indiqué sur celle-ci. ● L’emplacement de la fente COMMON INTERFACE peut varier en fonction du modèle. ● La carte d’interface commune (CI(CI+) CARD) n’est pas prise en charge dans certains pays et certaines régions ; vérifiez auprès de votre revendeur agréé.◀ ▶ Français ● Si vous rencontrez des problèmes, contactez le fournisseur d’accès. ● Insérez la carte d’interface commune (CI ou CI+ CARD), qui prend en charge les paramètres actuels de l’antenne. L’image sera déformée, voire invisible. ● Lorsque vous regardez la télévision par satellite, retirez la carte CI(CI+) de la diffusion hertzienne ou par câble. L’image sera déformée, voire invisible. (Pour le satellite)◀ ▶ Français ❑ Verrou antivol Kensington Le verrou antivol Kensington n’est pas fourni par Samsung. L’antivol Kensington est un dispositif utilisé pour fixer physiquement le système lorsqu’il est utilisé dans un endroit public. L’aspect du verrou et la méthode de verrouillage peuvent différer de l’illustration en fonction du fabricant. Consultez le manuel fourni avec le verrou Kensington pour obtenir des instructions d’utilisation supplémentaires. N Une icône “K” est présente à l’arrière du téléviseur. Un verrou Kensington se trouve à côté de l’icône “K”. 1 ◀ ▶ Français Pour vérrouiller l’appareil, procédez comme suit: 1. Enroulez le câble de verrouillage Kensington autour d’un objet large et fixe tel qu’un bureau ou une chaise. 2. Glissez le bout du câble auquel est attaché le verrou dans la boucle du câble de verrouillage Kensington. 3. Insérez le dispositif de verrouillage dans la fente Kensington de l’appareil 1. 4. Fermez le verrou. N Ces instructions sont d’ordre général. Pour de plus amples informations, consultez le manuel d’utilisation fourni avec le dispositif de verrouillage. N Le dispositif de verrouillage est vendu séparément. N L’emplacement du verrou Kensington peut varier en fonction du modèle.◀ ▶ Français ❑ Licence TheaterSound, SRS and symbol are trademarks of SRS Labs, Inc. TheaterSound technology is incorporated under licence from SRS Lab, Inc. Fabriqué sous licence de Dolby Laboratories. Dolby et le symbole du double D sont des marques commerciales de Dolby Laboratories. Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product Includes software. © DTS, Inc. All Rights Reserved.◀ Français DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used under licence. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 Avis concernant les Licences libres En cas d’utilisation d’un logiciel libre, des Licences libres sont disponibles dans le menu du produit. L’avis concernant les Licences libres est uniquement disponible en anglais. E-MANUAL imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model __________ Serial No.____________Contents Channel • Using the INFO button (Now & Next guide) 3 • Using the Channel Menu 4 • Using the Channel 14 • Memorising Channels 20 • Using the Channel (for Satellite TV) 27 • Memorising Channels (for Satellite TV) 32 • Other Features 47 Basic Features • Changing the Preset Picture Mode 49 • Adjusting Picture Settings 50 • Changing the Picture Size 51 • Changing the Picture Options 55 • Setting up the TV with Your PC 62 • Changing the Preset Sound Mode 66 • Adjusting Sound Settings 67 Preference • Connecting to a Wired Network 77 • Setting the Network 81 • Connecting to a Wireless Network 88 • Setting the Time 112 • Locking Programmes 120 • Economical Solutions 123 • Picture In Picture (PIP) 125 • Other Features 128 • Support Menu 139 Advanced Features • Using the 3D function 147 • About AllShare™ 159 • Setting Up AllShare™ 161 • Setting Up Anynet+ 165 • Anynet+ 167 • Switching between Anynet+ Devices 172 • Listening through a Receiver 174 • Troubleshooting for Anynet+ 176 • Using the My Downloads 179 • Connecting a USB Device 180 • Screen Display 185 • Videos 186 • Music 192 • Photos 195 • My Downloads - Additional Functions 197 Other Information • Teletext Feature 201 • Troubleshooting 206 • CONNECTIONS COMMON INTERFACE Slot 217 • Anti-theft Kensington Lock 220 • Licence 222▶ English ❑ Using the INFO button (Now & Next guide) The display identifies the current channel and the status of certain audio-video settings. The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time. ● Scroll l, r to view information for a desired programme while watching the current channel. ● Scroll u, d to view information for other channels. If you want to move to the currently selected channel, press the ENTERE button. , Life On Venus Avenue Unclassified No Detaild Information a Information 18:11 Thu 6 Jan 18:00 ~ 6:00 abc1 DTV Air 15 Channel◀ ▶ English ❑ Using the Channel Menu O MENUm → Support → Contents Home → ENTERE Press the CONTENT button to select Watch TV, and then select the menu you want to use. Each screen will be displayed. ● The displayed image may differ depending on the model. Watch TV Guide Schedule Manager Channel List Channel Manager My Downloads Source◀ ▶ English ■ Guide The EPG (Electronic Programme Guide) information is provided by broadcasters. Using programme schedules provided by broadcasters, you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time. Programme entries may appear blank or out of date depending on a channel status.◀ ▶ English Using Channel View a Red (Sche. Mgr): Displays the Schedule Manager. b Green (-24 Hours): Viewing the list of programmes to be broadcasted before 24 hours. { Yellow (+24 Hours): Viewing the list of programmes to be broadcasted after 24 hours. ● The displayed image may differ depending on the model. a Sche. Mgr { +24 Hours } Ch Mode ; Information k Page E Watch DTV Air 05.1 Globo HD TELA QUENTE (HD) 10:05 pm - 12:10 pm 10 DESVENTURAS EM SERIE (HD) Today 16:00 16:30 17:00 17:30 Guide 16:02 Tue 19 Jul Channel View - All Channels Programmes resume at 06:00 Home and... No Information QVC Selection No Information 04 Globo HD 05 DiscoveryH&L 06 TV GloboSD 07 price-drop.tv 08 QVC 09 R4DTT Tine Team No Information Fiv... Dark Angel American Chopper◀ ▶ English } Blue (Ch.Mode): Select the type of channels you want to display on the Channel View window. ; Information: Displays details of the selected programme. k Page: Move to next or previous page. EWatch / Schedule: When selecting the current programme, you can watch the selected programme. / When the selecting the next programme, you can reserve the selected programme.◀ ▶ English ■ Schedule Manager O CONTENT → Schedule Manager → ENTERE You can view, modify or delete a channel you have reserved to watch. Using the Timer Viewing You can set a desired channel to be displayed automatically at the intended time. Set the current time first to use this function. 1. Press the ENTERE button to select Schedule Manager. 2. Press the ENTERE button to add programme to schedule manually. The Timer Viewing screen appears.◀ ▶ English 3. Press the l / r / u / d buttons to set the Antenna, Channel, Repeat, Date or Start Time. ● Antenna: Select the desired antenna source. ● Channel: Select the desired channel. ● Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at your convenience. If you select Manual, you can set the day you want. N The c mark indicates the date is selected. ● Date: you can set the desired date. N It is available when you select Once in Repeat.◀ ▶ English ● Start Time: You can set the start time you want. N Press INFO to enter Detailed Information. On the Detailed Information screen, you can change or cancel a reserved information. ● Cancel Schedules: Cancel a show you have reserved to watch. ● Edit: Change a show you have reserved to watch. ● Return: Return to the previous screen.◀ ▶ English ■ Channel List You can view all the channel searched. O When you press the CH LIST button on the remote control, Channel List screen will be displayed at once. O Using the operation buttons with the Channel List. ● a Red (Antenna): Select the desired antenna source. N The option may differ depending on country. ● { Yellow (Programme View / Channel View): Displays the programme when digital channel is selected. Returns to the channel view. ● The displayed image may differ depending on the model. Channel List All 6 M6 9 W9 W9 MUSIC 11 NT1 800 24H TVE 801 arte 802 ATV 803 BBC 804 BBC 805 BBC Air a Antenna { Programme View L Ch. Mode E Watch k Page ◀ ▶ English ● l r Ch. Mode / Channel: Move to the type of channels you want to display on the Channel List screen / Change channels. N The option may differ depending on country. ● EWatch / Information: Watches the channel you select / Displays details of the selected programme. ● k Page: Move to next or previous page.◀ ▶ English How to use Timer Viewing in Channel List (digital channels only) When you set the Timer Viewing in Channel List, you can only set the programme in Programme View. 1. Press the CH LIST button, then select a desired digital channel. 2. Press the { (Programme View) button. 3. Press the u / d buttons to select the desired programme, then press the ENTEREInformation button. 4. Select Timer Viewing, then press the ENTERE button when done. N If you want to cancel Timer Viewing, follow steps 1 through 3. Select Cancel Schedules.◀ ▶ English ❑ Using the Channel ■ Channel Manager O CONTENT → Channel Manager → ENTERE Edit the favourite channel and set the channels to Delete, Deselect All or Select All. You can edit the channel name only for analogue channels. ● The displayed image may differ depending on the model. Channel Manager All Seclected item: 4 Channel Number 2/3 page Air a Antenna } Sorting k Page E Select T Tools R Return ◀ ▶ English ● ( ) Channels: Select a channel in the All, TV, Radio, Data/Other, Analogue screen. Change the antenna, or channel settings using the menus in the top right corner of the screen. ● ( ) Favourites 1 to 5: Shows favourite channels. N Using the colour buttons with the Channel Manager. ● a Red (Antenna): Select the desired antenna source. ● } Blue (Sorting): Changes the list ordered by channel number or name.◀ ▶ English Channel Status Display Icons Icon Operations a An analogue channel. c A channel selected. F A channel set as a favourite. Channel Manager Option Menu t Set each channel using the Channel Manager menu options (Watch, Add to Favourites / Edit Favourites, Lock / Unlock, Edit Channel Name, Edit Channel Number, Delete, Select All / Deselect All). Option menu items may differ depending on the channel status.◀ ▶ English 1. Select a channel and press the TOOLS button. 2. Select a function and change its settings. ● Watch: Watch the selected channel. ● Add to Favourites / Edit Favourites: Set channels you watch frequently as favourites / Add or Delete the selected channel in Favourites 1-5. 1. Select the Add to Favourites / Edit Favourites, then press the ENTERE button. N If the channel is already added to favourite channel, Edit Favourites will be shown.◀ ▶ English 2. Press the ENTERE button to select Favourites 1 to 5, then press the OK button. N One favourite channel can be added in several of Favourites among Favourites 1 to 5. ● Lock / Unlock: Lock a channel so that the channel cannot be selected and viewed. N This function is available only when the Channel Lock is set to On.◀ ▶ English ● Edit Channel Name (analogue channels only): Assign your own channel name. N This function may not support depending on the region. ● Edit Channel Number: Edit the number by pressing the number buttons desired. N This function may not support depending on the region. ● Delete: Delete a channel to display the channels you want. ● Select All: Select all the channels.◀ ▶ English ❑ Memorising Channels O MENUm → Channel → ENTERE ■ N Antenna The option may differ depending on country. t Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV.◀ ▶ English ■ Country (depending on the country) N The PIN input screen appears. Enter your 4 digit PIN number. N Select your country so that the TV can correctly auto-tune the broadcasting channels. ● Digital Channel: Change the country for digital channels. ● Analogue Channel: Change the country for analogue channels. ■ Auto Tuning N Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the Channel Lock function, the PIN input window appears.◀ ▶ English ● Antenna Source: Select the antenna source to memorise. The option may differ depending on country. ● Digital & Analogue / Digital / Analogue: Select the channel source to memorise. When selecting Cable → Digital & Analogue or Digital: Provide a value to scan for cable channels. ● Search Mode (Full / Network / Quick): Scans for all channels with active broadcast stations and stores them in the TV. N If you select Quick, you can set up the Network, Network ID, Frequency, Modulation, and Symbol Rate manually by pressing the button on the remote control. ● Network (Auto / Manual): Selects the Network ID setting mode among Auto or Manual.◀ ▶ English ● Network ID: When Network is Manual, you can set up Network ID using the numeric buttons. ● Frequency: Displays the frequency for the channel. (differs in each country) ● Modulation: Displays available modulation values. ● Symbol Rate: Displays available symbol rates. ■ Cable Search Option (depending on the country) Sets additional search options such as the frequency and symbol rate for a cable network search.◀ ▶ English ■ Manual Tuning Scans for a channel manually and stores in the TV. N If a channel is locked using the Channel Lock function, the PIN input window appears. ● Digital Channel Tuning: Scans for a digital channel. 1. Press the a button to select New. N When selecting Antenna → Air: Channel, Frequency, Bandwidth N When selecting Antenna → Cable: Frequency, Modulation, Symbol Rate◀ ▶ English 2. Press the d button to select Search. When scanning has finished, a channel is updated in the channel list. ● Analogue Channel Tuning: Scans for a analogue channel. 1. Press the a button to select New. 2. Set the Programme, Colour System, Sound System, Channel and Search. 3. Press the d button to select Store. When scanning has finished, a channel is updated in the channel list.◀ ▶ English N Channel mode ● P (programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode. ● C (aerial channel mode) / S (cable channel mode): These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.◀ ▶ English ❑ Using the Channel (for Satellite TV) for PDP 570 ■ Channel Manager O CONTENT → Channel Manager → ENTERE Edit the favourite channel and set the channels to Delete, Deselect All or Select All. You can edit the channel name only for analogue channels. ● The displayed image may differ depending on the model. Channel Manager All Seclected item: 4 Channel Number 2/3 page Air a Antenna } Sorting k Page E Select T Tools R Return ◀ ▶ English ● ( ) Channels: Select a channel in the All, TV, Radio, Data/Other, Analogue screen. Change the antenna, or channel settings using the menus in the top right corner of the screen. ● ( ) Favourites 1 to 5: Shows favourite channels. N Using the colour buttons with the Channel Manager. ● a Red (Antenna): Select the desired antenna source. ● } Blue (Sorting): Changes the list ordered by number or name.◀ ▶ English Channel Status Display Icons Icon Operations a An analogue channel. c A channel selected. F A channel set as a favourite. Channel Manager Option Menu t Set each channel using the Channel Manager menu options (Watch, Add to Favourites / Edit Favourites, Lock / Unlock, Edit Channel Name, Edit Channel Number, Delete, Select All / Deselect All). Option menu items may differ depending on the channel status.◀ ▶ English 1. Select a channel and press the TOOLS button. 2. Select a function and change its settings. ● Watch: Watch the selected channel. ● Add to Favourites / Edit Favourites: Set channels you watch frequently as favourites. 1. Select the Add to Favourites / Edit Favourites, then press the ENTERE button. N If the channel is already added to favourite channel, Edit Favourites will be shown.◀ ▶ English 2. Press the ENTERE button to select Favourites 1 to 5, then press the OK button. N One favourite channel can be added in several of Favourites among Favourites 1 to 5. ● Delete: Delete a channel to display the channels you want. ● Select All: Select all the channels in the channel list.◀ ▶ English ❑ Memorising Channels (for Satellite TV) O MENUm → Channel → ENTERE ■ N Antenna The option may differ depending on country. t Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV.◀ ▶ English ■ Country N The PIN input screen appears. Enter your 4 digit PIN number. N Select your country so that the TV can correctly auto-tune the broadcasting channels. ● Digital Channel: Change the country for digital channels. ● Analogue Channel: Change the country for analogue channels.◀ ▶ English ■ Auto Tuning ● Auto Tuning Scans for a channel automatically and stores in the TV. N Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the Channel Lock function, the PIN input window appears. ● Antenna Source: Select the antenna source to memorise. The option may differ depending on country.◀ ▶ English ● Digital & Analogue / Digital / Analogue: Select the channel source to memorise. When selecting Cable → Digital & Analogue or Digital: Provide a value to scan for cable channels. ● Search Mode (Full / Network / Quick): Scans for all channels with active broadcast stations and stores them in the TV. N If you select Quick, you can set up the Network, Network ID, Frequency, Modulation, and Symbol Rate manually by pressing the button on the remote control. ● Network (Auto / Manual): Selects the Network ID setting mode among Auto or Manual. ● Network ID: When Network is Manual, you can set up Network ID using the numeric buttons.◀ ▶ English ● Frequency: Displays the frequency for the channel. (differs in each country) ● Modulation: Displays available modulation values. ● Symbol Rate: Displays available symbol rates. ■ Cable Search Option (depending on the country) Sets additional search options such as the frequency and symbol rate for a cable network search.◀ ▶ English – Start frequency / Stop Frequency: Set the start or stop frequency. (differs in each country) – Symbol Rate: Displays available symbol rates. – Modulation: Displays available modulation values. ● Standby Auto Store (Off / On) for Italy : Enables or disables auto-tune while TV is in standby mode. ● Wake-up Timer (1 hour later / 2 hours later / 00:00 / 02:00 / 12:00 / 14:00) for Italy : Selects the schedule timer to turn the TV on and scan channels automatically.◀ ▶ English ■ Manual Tuning Scans for a channel manually and stores in the TV. N If a channel is locked using the Channel Lock function, the PIN input window appears. ● Transponder: Selects the transponder using the up/down buttons. ● Scan Mode: Selects either free or all channels to store. ● Network Search (Disable / Enable): network search using the up/down buttons.◀ ▶ English ● Signal Quality: Display the current status of broadcasting signal. N Information on a satellite and its transponder is subject to change depending on the broadcasting conditions. N When setting is completed, move to Search and press the ENTERE button. Channel scan is started.◀ ▶ English ■ Satellite System The PIN input screen appears. Enter your 4 digit PIN number. Satellite System is available when Antenna is set to Satellite. Before running Auto Store, set Satellite System. Then channel scan is run normally. ● Satellite Selection: You can choose the satellites for this TV. ● LNB Power (Off / On): Enables or disables the power supply for the LNB.◀ ▶ English ● LNB Settings: Configures the outdoor equipment. – Transponder: Selects the transponder using the up/down buttons. – DiSEqC Mode: Selects DiSEqC mode for the selected LNB. – Lower LNB Oscillators: Sets the LNB oscillators to a lower frequency. – Upper LNB Oscillators: Sets the LNB oscillators to a higher frequency. – Tone 22 kHz (Off / On / Auto): Selects the Tone 22 kHz depending on the LNB type. For a universal LNB it should be Auto. – Signal Quality: Display the current status of broadcasting signal.◀ ▶ English ● SatCR/Unicable Settings: Configure single cable installation. N This function may not support depending on the region. – SatCR/Unicable: Enables or disable single cable installation support. – Slot Number: Select the SatCR user slot number for this receiver. – Slot Frequency: Enter the appropriate frequency to receive the signal from SatCR. – Detect Slot Frequency: Auto-detect the signal frequency for the selected slot number. – Verify Slot Frequency: Verify that the frequency entered corresponds to the selected slot.◀ ▶ English ● Positioner Settings: Configures the antenna positioner. Positioner (On / Off): Enables or disables the positioned control. Positioner Type (USALS / DiSEqC 1.2): Sets the positioned type between DiSEqC 1.2 and USALS (Universal Satellite Automatic Location System). – My Longitude: Sets the longitude for my location. – My Latitude: Sets the latitude for my location. – Satellite Longitude Settings: Sets the longitude of user defined satellites.◀ ▶ English User Mode: Sets the position of satellite antenna according to each satellite. If you store the current position of satellite antenna according to a certain satellite, when the signal of that satellite is needed, the satellite antenna can be moved to pre-populated position. – Satellite: Selects the satellite to set the position for. – Transponder: Selects a transponder from the list for signal reception. – Moving Mode: Selects the movement mode between discrete and continuous movement. – Step Size: Adjusts the step size degrees for the antenna rotation. Step Size is available when Moving Mode is set to Step.◀ ▶ English – Go to Stored Position: Rotates the antenna to the stored satellite position. – Antenna Position: Adjusts and stores the antenna position for the selected satellite. – Store Current Position: Stores current position as the selected positioner limit. – Signal Quality: Display the current status of broadcasting signal.◀ ▶ English Installer Mode: Sets limits to the scope of movement of satellite antenna or reset the position. Generally, installation guide uses this function. – Limit Position (East / West): Selects the direction of the positioner Limit. – Antenna Position: Adjusts and stores the antenna position for the selected satellite. – Store Current Position: Stores the current position as the selected positioner Limit. – Go to Zero: Moves the antenna to the reference position. – Reset Positioner Limit: Allows the antenna to rotate over the full arc. ● Reset All Setting (OK / Cancel): All satellite settings will be reset to the initial values.◀ ▶ English ❑ Other Features O MENUm → Channel → ENTERE ■ Fine Tune (analogue channels only) If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear.◀ ▶ English N Settings are applied to the channel you’re currently watching. N Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner. N To reset the fine-tuning, select Reset. ■ Transfer Channel List The PIN input screen appears. Enter your 4 digit PIN number. Imports or exports the channel map. You should connect a USB storage to use this function. ● Import from USB: Import channel list from USB. ● Export to USB: Export channel list to USB. this function is available when USB is connected.◀ ▶ English ❑ Changing the Preset Picture Mode O MENUm → Picture → Picture Mode → ENTERE ■ Picture Mode Select your preferred picture type. N When connecting a PC, the Picture Mode is only available the Standard and Entertain. ● Dynamic: Suitable for a bright room. ● Standard: Suitable for a normal environment. ● Movie: Suitable for watching movies in a dark room. ● Entertain: Suitable for watching movies and games. N It is only available when connecting a PC. Basic Features◀ ▶ English ❑ Adjusting Picture Settings O MENUm → Picture → ENTERE ■ Cell Light / Contrast / Brightness / Sharpness / Colour / Tint (G/R) Your television has several setting options for picture quality control. N When you make changes to Cell Light, Contrast, Brightness, Sharpness, Colour or Tint (G/R) the OSD will be adjusted accordingly. N When connecting a PC, you can only make changes to Cell Light, Contrast, Brightness and Sharpness. N Settings can be adjusted and stored for each external device connected to the TV. N Lowering picture brightness reduces power consumption.◀ ▶ English ❑ Changing the Picture Size O MENUm → Picture → Screen Adjustment → ENTERE ■ Screen Adjustment ● Picture Size: Your cable box / satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time. Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio. 16:9: Sets the picture to 16:9 wide mode. Wide Zoom: Magnifies the picture size more than 4:3. N Adjusts the Position by using u, d buttons.◀ ▶ English Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size. N Adjusts the Zoom or Position by using u, d button. 4:3: Sets the picture to basic (4:3) mode. N Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the screen may cause image retention (screen burn) which are not covered by the warranty. Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.◀ ▶ English N NOTE ● Depending on the input source, the picture size options may vary. ● The available items may differ depending on the selected mode. ● When connecting a PC, only 16:9 and 4:3 modes can be adjusted. ● Settings can be adjusted and stored for each external device connected to an input on the TV. ● If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the over scan function.◀ ▶ English ● 4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different picture size. N Not available in PC, Component or HDMI mode.◀ ▶ English ❑ Changing the Picture Options ■ Advanced Settings O MENUm → Picture → Advanced Settings → ENTERE (Advanced Settings are available in Standard / Movie mode) Compared to previous models, new Samsung TVs have a more precise picture. N When connecting a PC, you can only make changes to Gamma and White Balance.◀ ▶ English ● Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth. ● Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast. ● Gamma: Adjust the primary colour intensity. ● The displayed image may differ depending on the model. Advanced Settings Black Tone : Off r Dynamic Contrast : Medium Gamma : 0 RGB Only Mode : Off Colour Space : Native White Balance Flesh Tone : 0 d U Move EEnter R Return◀ ▶ English ● RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and Blue colour for making fine adjustments to the hue and saturation. ● Colour Space (Auto / Native): Adjust the range of colours available to create the image. ● White Balance: Adjust the colour temperature for a more natural picture. R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) darkness. R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness. Reset: Resets the White Balance to it’s default settings.◀ ▶ English ● Flesh Tone: Emphasize pink “Flesh Tone”. ● Edge Enhancement (Off / On): Emphasize object boundaries. ● Motion Lighting (Off / On): Reduce power consumption by brightness control. N When changing a setting value of Contrast, Motion Lightning will be set to Off.◀ ▶ English ■ Picture Options O MENUm → Picture → Picture Options → ENTERE N When connecting a PC, you can only make changes to the Colour Tone. ● Colour Tone (Cool / Standard / Warm1 / Warm2) N Warm1 or Warm2 will be deactivated when the picture mode is Dynamic. N Settings can be adjusted and stored for each external device connected to an input on the TV. ● The displayed image may differ depending on the model. Picture Options Colour Tone : Standard r Digital Noise Filter : Auto MPEG Noise Filter : Auto HDMI Black Level : Normal Film Mode : Off U Move EEnter R Return◀ ▶ English ● Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen. N When the signal is weak, try other options until the best picture is displayed. ● Auto Visualisation: When changing analogue channels, displays signal strength. N Only available for analogue channels. N When bar is green, you are receiving the best possible signal. ● MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise to provide improved picture quality.◀ ▶ English ● HDMI Black Level (Low / Normal): Selects the black level on the screen to adjust the screen depth. N Available only in HDMI mode. ● Film Mode (Off / Auto1 / Auto2 / Cinema Smooth for PDP 550 and above ): Sets the TV to automatically sense and processes film signals from all sources and adjusts the picture for optimum quality. The Cinema Smooth function is only activated when HDMI 24Hz signal is inputted. N Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (1080i). ■ Reset Picture (OK / Cancel) Resets your current picture mode to its default settings.◀ ▶ English ❑ Setting up the TV with Your PC Select the input source to PC. ■ O Auto Adjustment MENUm → Picture t→ Auto Adjustment → ENTERE Frequency values / position and fine tune are adjusted automatically. N Not available when connecting with an HDMI to DVI cable.◀ ▶ English ■ PC Screen Adjustment O MENUm → Picture → Screen Adjustment → PC Screen Adjustment → ENTERE ● Coarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned to the centre of screen. ● Position: Adjusts the PC screen position with direction button (u / d / l / r). ● Image Reset: Resets the image to default settings.◀ ▶ English Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card, the actual screens on your PC may differ in which case the same basic set-up information will almost always be applied. (If not, contact your computer manufacturer or Samsung Dealer.) 1. Click on “Control Panel” on the Windows start menu. 2. Click on “Appearance and Themes” in the “Control Panel” window and a display dialog-box will appear. 3. Click on “Display” and a display dialog box will appear.◀ ▶ English 4. Navigate to the “Settings” tab on the display dialog-box. ● If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.◀ ▶ English ❑ Changing the Preset Sound Mode ■ Sound Mode ● Standard: Selects the normal sound mode. t ● Music: Emphasizes music over voices. ● Movie: Provides the best sound for movies. ● Clear Voice: Emphasizes voices over other sounds. ● Amplify: Increases the intensity of high-frequency sound to allow a better listening experience for the hearing impaired. N If Speaker Select is set to External Speaker is disabled.◀ ▶ English ❑ Adjusting Sound Settings O MENUm → Sound → Sound Effect →ENTERE ■ Sound Effect ● SRS TruSurround HD (Off / On) (standard sound mode only) This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF (Head Related Transfer Function) technology. N If Speaker Select is set to External Speaker, SRS TruSurround HD is disabled.◀ ▶ English ● SRS TruDialog (Off / On) (standard sound mode only) This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly. N If Speaker Select is set to External Speaker, SRS TruDialog is disabled.◀ ▶ English ● Equalizer Adjusts the sound mode (standard sound mode only). – Balance L/R: Adjusts the balance between the right and left speaker. – 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies. – Reset: Resets the equalizer to its default settings. N If Speaker Select is set to External Speaker, Equalizer is disabled.◀ ▶ English ■ Broadcast Audio Options ● Audio Language (digital channels only) Change the default value for audio languages. N The available language may differ depending on the broadcast. ● Audio Format (digital channels only) When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.◀ ▶ English N Audio Format option may differ depending on the broadcast. 5.1ch Dolby digital sound is only available when connecting an external speaker through an optical cable. ● Audio Description (not available in all locations) (digital channels only) This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster. N Audio Description (Off / On): Turn the audio description function on or off. N Volume: Adjust the audio description volume.◀ ▶ English ■ Additional Settings (digital channels only) ● DTV Audio Level (MPEG / HE-AAC): This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level. N According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB. N To increase or decrease the volume, adjust between the range 0 and -10 respectively.◀ ▶ English ● SPDIF Output: SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player. Audio Format: You can select the Digital Audio output (SPDIF) format. N The available Digital Audio output (SPDIF) format may differ depending on the input source. Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms~250ms).◀ ▶ English ● Dolby Digital Comp (Line / RF): This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound). N Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time. Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB. RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB.◀ ▶ English ■ Speaker Settings ● Speaker Select (External Speaker / TV Speaker): A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker. N When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited. N When Speaker Select is set to External Speaker. ● TV Speaker: Off, External Speaker: On◀ ▶ English N When Speaker Select is set to TV Speaker. ● TV Speaker: On, External Speaker: On N If there is no video signal, both speakers will be mute. ● Auto Volume (Off / Normal / Night): To equalize the volume level on each channel, set to Normal. Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night. ■ Reset Sound (OK / Cancel) Reset all sound settings to the factory defaults.◀ ▶ English ❑ Connecting to a Wired Network for PDP 550 and 570 Series You can attach your TV to your LAN using cable in three ways: ● You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a LAN cable. See the diagram below. Preference The Modem Port on the Wall LAN Modem Cable LAN Cable External Modem (ADSL / VDSL / Cable TV)◀ ▶ English ● You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem. Use LAN cable for the connection. See the diagram below. The Modem Port on the Wall LAN Modem Cable LAN Cable LAN Cable External Modem (ADSL / VDSL / Cable TV) IP Sharer (having DHCP server)◀ ▶ English ● Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a LAN cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house. The LAN Port on the Wall LAN LAN Cable◀ ▶ English ● If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you do not have to enter them manually. Most home networks are Dynamic Networks. Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows computer, you can also get these values through your computer. N You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that support DHCP also let you use Static IP addresses.◀ ▶ English ❑ Setting the Network for PDP 550 and 570 Series ■ Network Settings O MENUm → Network → Network Settings → ENTERE Set the network connection to use various Internet services such as AllShare™ and perform software upgrade. ■ Network Status O MENUm → Network → Network Status → ENTERE You can check the current network and Internet status.◀ ▶ English ■ AllShare Settings O MENUm → Network → AllShare Settings → ENTERE Selects whether to use media functions on the network. ■ Network Settings (Auto) Use the Automatic Network Settings when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps:◀ ▶ English How to set up automatically 1. Go to Network Settings screen. To enter it, follow the directions of Network Settings. 2. Select the Wired. 3. The network test screen appears, and network setting is done. U Move E Enter R Return Network Settings Select the network connection type. Wired Wireless(general) WPS(PBC) One Foot Connection Connect to the network using a LAN cable. Please make sure that the LAN cable is connected. ◀ ▶ English N If it fails to set automatically, check the connection of LAN port. N If you cannot find network connection values or if you want to set connection manually, set it to Manual. Refer to following “How to set up manually”. ● The displayed image may differ depending on the model. a Previous L Move E Enter R Return Network Setting Wired network and Internet connection completed. IP Settings Retry OK MAC Address 00:40:30:30:20:10 IP Address 192.168.10.21 Subnet Mask 255.255.255.0 Gateway 192.168.10.1 DNS Server 203.248.252.2 Internet is connected successfully. If you have a problem with using Internet service, contact your Internet service provider.◀ ▶ English ■ Network Settings (Manual) Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address. Getting the Network Connection Values To get the Network connection values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. 2. In the pop-up menu that appears, click Status. 3. On the dialog that appears, click the Support tab. 4. On the Support Tab, click the Details button. The Network connection values are displayed.◀ ▶ English How to set up manually To set up your TV’s cable network connection manually, follow these steps: 1. Follow Steps 1 through 2 in the “How to set up automatically” procedure. 2. Select the IP Settings on network test screen. 3. Set IP Mode to Manual. 4. Press the d button on your remote to go to the IP Address. ● The displayed image may differ depending on the model. U Move E Enter R Return IP Settings Internet Protocol Setup : Manual r IP Address . . . Subnet Mask . . . Gateway . . . DNS : Manual DNS Server . . . OK◀ ▶ English 5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another. 6. When done, select the OK. 7. The network test screen appears, and network setting is done.◀ ▶ English ❑ Connecting to a Wireless Network for PDP 550 and 570 Series To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN), which you connect to your TV’s back or side panel USB port. See the illustration below. The LAN Port on the Wall LAN Cable Wireless IP sharer (router having DHCP server) Samsung Wireless LAN adapter TV Rear Panel◀ ▶ English Samsung’s Wireless LAN adapter is sold separately and is offered by selected retailers, Ecommerce sites and Samsungparts.com. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video may not be played smoothly. N NOTE ● You must use the “Samsung Wireless LAN adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless network.◀ ▶ English ● To use a wireless network, your TV must be connected to a wireless IP sharer (either a router or a modem). If the wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. ● Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communication failure. ● If you apply a security system other than the systems listed below, it will not work with the TV.◀ ▶ English ● If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications. ● If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode. ● If your router, modem, or device is not certified, it may not connect to the TV via the “Samsung Wireless LAN adapter.”◀ ▶ English ● Ensure the TV is turned on before you connect the Samsung Wireless LAN adapter. ● Connection Methods: You can setup the wireless network connection on six ways. – Auto Setup (Using the Auto Network Search function) – Manual Setup – WPS(PBC) – Ad Hoc – One Foot Connection – Plug & Access◀ ▶ English ● The Samsung Wireless LAN adapter may not be recognized when using a connection via a USB hub or via a USB extension cable other than the cable supplied. ■ Network Settings (Auto) Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the setup process.◀ ▶ English How to set up automatically 1. Go to Network Settings screen. To enter it, follow the directions of Network Settings. 2. Select the Wireless. ● The displayed image may differ depending on the model. U Move E Enter R Return Network Settings Select the network connection type. Wired Wireless(general) WPS(PBC) One Foot Connection Set up wireless network by selecting your wireless router. You may need to enter security key depending on the setting of the wireless router.◀ ▶ English 3. The Network function searches for available wireless networks. When done, it displays a list of the available networks. 4. In the list of networks, press the u or d button to select a network, and then press the ENTERE button. N If the wireless router is set to Hidden (Invisible), you have to select Add Network and enter the correct Network Name (SSID) and Security key to establish the connection. 5. If the Security screen pop-up appears, go to step 6. If you select the wireless router which does not have security, go to step 7.◀ ▶ English 6. If the wireless router has security, enter the Security key (Security or PIN), then select Done. N When you enter the Security key (Security or PIN), use u / d / l / r buttons on your remote to select number/characters. N You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem. ● The displayed image may differ depending on the model. a Previous b Done n Move E Enter R Return Network Setting Enter security key. 0 entered a g m s a/A b h n t f l r x Space d j p v Delete 2 5 8 z Done c i o u F 1 4 7 y e k q w 3 6 9 0◀ ▶ English 7. The network connection screen appears, and network setting is done. N If it fails to set Security key (Security or PIN), select Reset or IP Settings. N If you want to set connection manually, select the IP Settings. Refer to following “How to set up manually”.◀ ▶ English ■ Network Setup (Manual) Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address. Getting the Network Connection Values To get the Network connection values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. 2. In the pop-up menu that appears, click Status.◀ ▶ English 3. On the dialog that appears, click the Support tab. 4. On the Support Tab, click the Details button. The Network connection values are displayed. How to set up manually To set up your TV’s cable network connection manually, follow these steps: 1. Follow Steps 1 through 2 in the “How to set up automatically” procedure. 2. Select the IP Settings on network test screen. 3. Set IP Mode to Manual.◀ ▶ English 4. Press the d button on your remote to go to the IP Address. 5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons on your remote to enter numbers and the arrow buttons to move from one entry field to another. 6. When done, select the OK. 7. The network test screen appears, and network setting is done.◀ ▶ English ■ Network Setup (WPS(PBC)) How to set up using WPS(PBC) If your router has a WPS(PBC) button, follow these steps: 1. Go to Network Setting screen. To enter it, follow the directions of Network Settings. 2. Select the WPS(PBC). 3. Press the WPS(PBC) button on your router within 2 minutes. Your TV automatically acquires all the network setting values it needs and connects to your network. 4. The network test screen appears, and network setting is done. ● The displayed image may differ depending on the model. U Move E Enter R Return Network Settings Select the network connection type. Wired Wireless(general) WPS(PBC) One Foot Connection Connect to the wireless router easily by pressing the WPS(PBC) button. Choose this if your wireless router supports push button configuration(PBC).◀ ▶ English ■ Network Settings (One Foot Connection) The One Foot Connection make you easy to connect samsung TV and samsung wireless router by placing samsung wireless router within 1 foot(25cm) from samsung TV. If your wireless router does not support One Foot Connection, you must connect using one of the other methods. N You can check for equipment that supports One Foot Connection on www. samsung.com.◀ ▶ English How to set up using One Foot Connection Turn on the power of wireless router and TV. 1. Go to Network Settings screen. To enter it, follow the directions of Network Settings. 2. Select the One Foot Connection. 3. Place the wireless router in parallel with the Samsung Wireless LAN adapter giving a gap no larger than 25cm. ● The displayed image may differ depending on the model. U Move E Enter R Return Network Settings Select the network connection type. Wired Wireless(general) WPS(PBC) One Foot Connection Connect to the wireless network automatically if your wireless router supports One Foot Connection. Select this connection type after placing the wireless router within 10 inches (25cm) of your TV.◀ ▶ English N If One Foot Connection dose not connect your TV to your router, a pop-up window appears on the screen notifying you of the failure. If you want to try using One Foot Connection again, reset the wireless router, disconnect the Samsung Wireless LAN adapter and then try again from Step 1. You can also choose one of the other connection setup methods.◀ ▶ English 4. The network connection screen appears, and network setting is done. 5. Place the wireless Router to a desired location. N If the wireless Router settings change or you install a new wireless Router, you must perform the One Foot Connection procedure again, beginning from Step 1.◀ ▶ English ■ Network Setting (Plug & Access) Plug & Access function make you easy to connect samsung TV and samsung wireless router by using USB memory stick. If your wireless router does not support Plug & Access, you must connect using one of the other methods. N You can check for equipment that supports Plug & Access on www.samsung. com. How to set up using Plug & Access function Turn on the power of wireless router and TV. 1. Insert USB memory stick into our Samsung wireless router and checking wireless router’s LED status (Blinking → On). 2. Then take USB memory out and insert it into Samsung TV.◀ ▶ English 3. Wait until the connection is automatically established. N If Plug & Access does not connect your TV to your wireless router a popup window appears on the screen notifying you of the failure. If you want to try using Plug & Access again, reset the wireless router disconnect the Samsung Wireless LAN adapter and then try again from Step 1. You can also choose one of the other connection setup methods. 4. The network connection screen appears, and network setting is done. 5. Place the wireless router in a desired location. N If the wireless router settings change or you install a new wireless router you must perform the Plug & Access procedure again, beginning from Step 1.◀ ▶ English Priority QOS Samsung wireless Router is optimized HD AV streaming for Samsung DTV This is our product’s distinctive function. Samsung wireless Router can be connected with many devices, such as laptop, mobile phone, BD player etc. In case of connecting Samsung TV to Samsung wireless Router while other devices are connected, Samsung wireless Router will give Samsung TV a priority connection than other devices. This function ensures the best streaming contents and throughput speed. ● Make your TV faster by giving priority bandwidth to your TV (on / off optional). ● By giving priority to Samsung TVs, enjoy HD content without buffering. ● Connection speed may vary based on the network environment.◀ ▶ English ■ Network Setup (Ad Hoc) You can connect to a mobile device supporting Ad-hoc without an wireless router through the “Samsung Wireless LAN adapter”. When connecting mobile device, you can use files on device or connect internet using AllShare or Multimedia function. How to connect to new Ad-hoc 1. Go to Network Settings screen. To enter it, follow the directions of Network Settings. 2. Select the Wireless.◀ ▶ English 3. When finished searching a mobile device, set the Network Name (SSID) and Security key of the device, and then connect the network. N If network does not operate normally, check the Network Name (SSID) and Security key again. An incorrect Security key may cause a malfunction. N If a device is connected once, it is displayed in Network Setting list. When you connect it again, you can find it in network setting list.◀ ▶ English If Your TV Fails to Connect to the Internet Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access. As your TV has a different MAC address, your ISP can not authenticate its MAC address, and your TV can not connect. To resolve this problem, ask your ISP about the procedures required to connect devices other than a PC (such as your TV) to the Internet. If your Internet service provider requires an ID or password to connect to the Internet, your TV may not be able to connect to the Internet. If this is the case, you must enter your ID or password when connecting to the Internet. The internet connection may fail because of a firewall problem. If this is the case, contact your Internet service provider. If you cannot connect to the Internet even after you have followed the procedures of your Internet service provider.◀ ▶ English ❑ Setting the Time O MENUm → System → ENTERE ■ Time ● Clock: Setting the clock is for using various timer features of the TV. O The current time will appear every time you press the INFO button. N If you disconnect the power cord, you have to set the clock again. – Clock Mode (Auto / Manual) Auto: Set the current time automatically using the time from a digital channel.◀ ▶ English N The antenna must be connected in order to set the time automatically. Manual: Set the current time manually. N Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually. – Clock Set: Set the Day, Month, Year, Hour, Minute. N Available only when Clock Mode is set to Manual. N You can set the day, month, year, hour and minute directly by pressing the number buttons on the remote control. – Time Zone (Auto / Manual): Selects your time zone. N The option may differ depending on country. N This function is only available when the Clock Mode is set to Auto.◀ ▶ English Using the Sleep Timer O MENUm → System → Time → Sleep Timer → ENTERE ● Sleep Timert: Automatically shuts off the TV after a preset period of time (30, 60, 90, 120, 150 and 180 minutes). N To cancel Sleep Timer, select Off.◀ ▶ English Setting the On / Off Timer O MENUm → System → Time → ENTERE ● On Timer 1 / On Timer 2 / On Timer 3: Three different on timer settings can be made. You must set the clock first. Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer. N The c mark indicates the day is selected. ● The displayed image may differ depending on the model. TV 11 00 20 DTV 1 On Timer 1 Setup Once 11 Source On Time Volume Antenna Channel Sun Mon Tue Wed Thu Fri Sat U Adjust L Move E Enter R Return◀ ▶ English On Time: Set the hour and minute. Volume: Set the desired volume level. Source: Select TV or USB content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV) Antenna (when the Source is set to TV): Select the desired antenna source. Channel (when the Source is set to TV): Select the desired channel. Music / Photo (when the Source is set to USB): Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically.◀ ▶ English N Auto Power Off (available only when the TV is turned on by Timer): The TV will be automatically turned off after 4 hours of being left idle to prevent overheating. N NOTE ● If there is no music file on the USB device or the folder containing a music file is not selected, the Timer function does not operate correctly. ● When there is only one photo file in the USB, the Slide Show will not play. ● If a folder name is too long, the folder cannot be selected.◀ ▶ English ● Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folders assigned to each USB have different names. ● It is recommended that you use a USB memory stick and a multi card reader when using On Timer. The On Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by some manufacturers because these devices take a long time to be recognized.◀ ▶ English ● Off Timer 1 / Off Timer 2 / Off Timer 3: Three different off timer settings can be made. You must set the clock first. Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you select Manual, you can set up the day you want to activate the timer. N The c mark indicates the day is selected. Off Time: Set the hour and minute. ● The displayed image may differ depending on the model. 00 00 Off Timer 1 Setup Once Off Time Sun Mon Tue Wed Thu Fri Sat L Move U Adjust E Enter R Return◀ ▶ English ❑ Locking Programmes O MENUm → System → Security → ENTERE ■ Security The PIN input screen appears, Enter your 4 digit PIN number. ● Channel Lock (Off / On): Lock channels in Channel Manager, to prevent unauthorized users, such as children, from watching unsuitable programme. N Available only when the Source is set to TV.◀ ▶ English ● Programme Rating Lock (depending on the country): Prevent unauthorized users, such as children, from watching unsuitable programme with a userdefined 4-digit PIN code. If the selected channel is locked, the “\” symbol will be displayed. N The items of Programme Rating Lock differs depending on the country. ● Change PIN: Change your personal ID number required to set up the TV. ● Adult Services (Off / On): You can adjust the Adult Services. N The Adult Services is available for Freesat antenna only. ◀ ▶ English How to watch a restricted channel If the TV is tuned to a restricted channel, the Programme Rating Lock will block it. The screen will go blank and the following message will appear: This channel is blocked by Programme Rating Lock. Please enter the PIN to unblock.◀ ▶ English ❑ Economical Solutions ■ Eco Solution O MENUm → System → Eco Solution → ENTERE ● Energy Saving (Off / Low / Medium / High / Picture Off) t: This adjusts the brightness of the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen. ● Eco Sensor (Off / On): To enhance your power savings; the picture settings will automatically adapt to the light in the room.◀ ▶ English N If you adjust the Cell Light, the Eco Sensor will be set to Off. Min Cell Light: When Eco sensor is On, the minimum screen brightness can be adjusted manually. N If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the surrounding light intensity. ● No-Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid unnecessary energy consumption, set how long you want the TV to remain on if it’s not receiving a signal. N Disabled when the PC is in power saving mode. ● Auto Power Off (Off / On): The TV will be automatically turned off after 4 hours of being left idle to prevent overheating.◀ ▶ English ❑ Picture In Picture (PIP) O MENUm → System → PIP → ENTERE ■ PIP You can watch the TV tuner and one external video source simultaneously. PIP (Picture-in-Picture) does not function in the same mode.◀ ▶ English ● PIP (Off / On): Activate or deactivate the PIP function. ● Channel: Select the channel for the sub-screen. ● Size (õ / ã): Select a size for the sub-picture. ● Position (ã/ – / — / œ): Select a position for the sub-picture. ● Sound Select (Main / Sub): You can choose the desired sound Main / Sub in PIP mode.◀ ▶ English N NOTE ● For PIP sound, refer to the Sound Select instructions. ● If you turn the TV off while watching in PIP mode, the PIP window will disappear. ● You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke. ● While Programme Rating Lock is in operation, the PIP function cannot be used. ● PIP Settings Main picture Sub picture Component, HDMI, PC TV◀ ▶ English ❑ Other Features O MENUm → System → ENTERE ■ Language ● Menu Language: Set the menu language. ● Teletext Language: Set a desired language for teletext. N English is the default in cases where the selected language is unavailable in the broadcast. ● Preference (Primary Audio Language / Secondary Audio Language / Primary Subtitle Language / Secondary Subtitle Language / Primary Teletext Language / Secondary Teletext Language): Select a language, which will be the default language when a channel is selected. N The option may differ depending on country.◀ ▶ English ■ Subtitle Use this menu to set the Subtitle mode. ● Subtitle (Off / On): Switches subtitles on or off. ● Subtitle Mode (Normal / Hearing Impaired): Sets the subtitle mode. ● Subtitle Language: Sets the subtitle language. N If the programme you are watching does not support the Hearing Impaired function, Preferred automatically activates even if the Hearing Impaired mode is selected. N English is the default in cases where the selected language is unavailable in the broadcast.◀ ▶ English ■ Digital Text (Disable / Enable) for U.K If the programme broadcasts with digital text, this feature is enabled. MHEG (Multimedia and Hypermedia Information Coding Experts Group): An International standard for data encoding systems used in multimedia and hypermedia. This is at a higher level than the MPEG system which includes datalinking hypermedia such as still images, character service, animation, graphic and video files as well as multimedia data. MHEG is user runtime interaction technology and is being applied to various fields including VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), tele-education, tele-conferencing,digital libraries and network games.◀ ▶ English ■ Screen Burn Protection To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. The Time setting allows you to programme the time between movement of the picture in minutes. ● Pixel Shift (Off / On): Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to minimize after image on the screen. N Optimum condition for pixel shift Item TV / AV / Component / HDMI/PC Horizontal 0~4 4 Vertical 0~4 4 Time (minute) 1~4 min 4 min◀ ▶ English N The Pixel Shift value may differ depending on the monitor size (inches) and mode. N This function is not available in the Screen Fit mode. ● Auto Protection Time (Off / 10 min / 20 min / 40 min / 1 hour): If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen. ● Scrolling: This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after images or symbols on the screen, especially when you displayed a still image on the screen for a long time. ◀ ▶ English N The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after-images on the screen. If the after-image is not removed after performing the function, repeat the function again. N Press any key on the remote control to cancel this feature. ● Side Grey (Light / Dark): When you watch TV with the screen ratio set to 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides.◀ ▶ English ■ General ● Game Mode (Off / On): When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode. N Precautions and limitations for game mode – To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu. – If you display the TV menu in Game Mode, the screen shakes slightly. N Game Mode is not available when the input source is set to TV or PC.◀ ▶ English N After connecting the game console, set Game Mode to On. Unfortunately, you may notice reduced picture quality. N If Game Mode is On: – Picture mode is set to Standard and Sound mode is set to Movie. ● Menu Transparency (Bright / Dark): Set the Transparency of the menu. ● Boot Logo (Off / On): Display Samsung logo when the TV is turned on. ● TV Name for PDP 550 and 570 Series : Sets the TV name so you can find it easily on a mobile device. N If you select User Input, you can type on the TV using the OSK (On Screen Keyboard).◀ ▶ English ■ Anynet+ (HDMI-CEC) For details on set up options, refer to the “What is Anynet+?” instructions. ■ DivX® Video On Demand Shows the registration code authorized for the TV. If you connect to the DivX web site and register, you can download the VOD registration file. If you play the VOD registration using Videos under SMART HUB, the registration is completed. N For more information on DivX® VOD, visit “http://vod.divx.com”.◀ ▶ English ■ Common Interface ● CI Menu: This enables the user to select from the CAM-provided menu. Select the CI Menu based on the menu PC Card. ● Application Info: View information on the CAM inserted into the CI slot and on the “CI or CI+ CARD” which is inserted into the CAM. You can install the CAM anytime whether the TV is on or off. 1. Purchase a CI CAM module at your nearest dealer or by phone. 2. Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the arrow. 3. Insert the CAM with the “CI or CI+ CARD” into the common interface slot, in the direction of the arrow so that it aligns parallel with the slot. 4. Check if you can see a picture on a scrambled signal channel.◀ ▶ English ■ Network Remote Control (On / Off) for PDP 550 and 570 Series Turn on / off or give permission to Samsung mobile phones devices. You must have a Samsung Mobile phone / device which supports Network Remote Control. For more details, refer to each device’s manual.PIP Settings◀ ▶ English ❑ Support Menu ■ e-Manual O MENUm → Support → ENTERE You can read the introduction and instructions about the TV features stored in your TV. N For the detailed information about e-Manual Screen, refer to “How to view the e-Manual” in User Manual.◀ ▶ English ■ Self Diagnosis O MENUm → Support → ENTERE N Self Diagnosis might take few seconds, this is part of the normal operation of the TV. ● Picture Test: Use to check for picture problems. Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes. There may be a problem with the TV. Contact Samsung’s Call Centre for assistance. No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.◀ ▶ English ● Sound Test: Use the built-in melody sound to check for sound problems. N If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV Speaker in the Sound menu. N The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button. Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes. There may be a problem with the TV. Contact Samsung’s Call Centre for assistance. No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.◀ ▶ English ● Signal Information: (digital channels only) An HD channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength. ● Troubleshooting: If the TV seems to have a problem, refer to this description. N If none of these troubleshooting tips apply, contact the Samsung customer service centre.◀ ▶ English ■ Software Upgrade Software Upgrade can be performed by network connection or downloading the latest firmware from “www.samsung.com.” to a USB memory device. Current Version the software already installed in the TV. N Software is represented as ‘Year / Month / Day_Version’.◀ ▶ English ● The displayed image may differ depending on the model. Installing the Latest Version ● By USB: Insert a USB drive containing the firmware upgrade file, downloaded from “www.samsung.com,” into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to to write down your settings so that you can easily reset them after the upgrade. USB◀ ▶ English ● By Online for PDP 550 and 570 Series : Upgrade the software using the Internet. N First, configure your network. For detailed procedures on using the Network Setup, refer to the Network Settings instructions. N If the internet connection doesn’t operate properly, the connection may be broken. Please retry downloading. If the problem persists, download by USB and upgrade. ● By Channel: Upgrade the software using the broadcasting signal. N If the function is selected during the software transmission period, software will be automatically searched and downloaded. N The time required to download the software is determined by the signal status.◀ ▶ English ● Alternative Software for PDP 550 and 570 Series (backup): If there is an issue with the new firmware and it is affecting operation, you can change the software to the previous version. N If the software was changed, existing software is displayed. ● Standby Mode Upgrade: A manual upgrade will be automatically performed at selected time. Since the power of the unit is turned on internally, the screen may be turned on slightly for the product. This phenomenon may continue for more than 1 hour until the software upgrade is complete. ■ Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centres and how to download products and software. ■ Contents Home You can enjoy useful and various contents. ◀ ▶ English ❑ Using the 3D function for PDP 490 Series and above O MENUm → Picture → 3D → ENTERE ■ 3D This exciting new feature enables you to view 3D content. In order to fully enjoy this feature, you must purchase a pair of Samsung 3D Active Glasses to view 3D video. Samsung 3D Active Glasses are sold separately. For more detailed purchasing information, contact the retailer where you purchased this TV. Advanced Features◀ ▶ English IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and understand the following safety information before using the TV’s 3D function. [ WARNING ● Some viewers may experience discomfort while viewing 3D TV such as dizziness, nausea and headaches. If you experience any such symptom, stop viewing 3D TV, remove 3D Active Glasses and rest. ● Watching 3D images for an extended period of time may cause eye strain. If you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses and rest.◀ ▶ English ● A responsible adult should frequently check on children who are using the 3D function. If there are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D TV and rest. ● Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, protective goggles, etc.) ● Do not use the 3D function or 3D Active Glasses while walking or moving around. Using the 3D function or 3D Active Glasses while moving around may result in injuries due to running into objects, tripping, and / or falling.◀ ▶ English ● 3D Mode: Select the 3D input format. N If you want to feel the 3D effect fully, please wear the 3D Active Glasses first, and then select 3D Mode from the list below that provides the best 3D viewing experience. N When watching 3D images, turn on 3D Active Glasses. 3D Mode Operation Off Turns the 3D function off. 2D → 3D Changes a 2D image to 3D. Side by Side Displays two images next to each other. Top & Bottom Displays one image above another.◀ ▶ English N Some file format may not supported the “2D → 3D.” N “Side by Side” and “Top & Bottom” are available when the resolution is 720p, 1080i and 1080p in DTV, HDMI and USB mode or when set to PC and the PC is connected through an HDMI/DVI cable. ● 3D Perspective (-5~+5): Adjust overall 3D perspective of on-screen image. ● Depth (0~10): Adjust overall depth. ● L/R Change (L/R Image / R/L Image): Swap the left and right pictures. ● 3D → 2D (Off / On): Displays the image for the left eye only. N This function is deactivated when 3D Mode set to “2D → 3D” or Off.◀ ▶ English Resolution supported for HDMI PC mode The resolution for HDMI PC mode is optimized to 1920 x 1080 input. An input resolution other than 1920 x 1080 may not be displayed properly in 3D display or full screen mode.◀ ▶ English How to watch the 3D image N Some 3D modes may not be available depending on the format of the image source. N To watch in 3D, wear 3D Active Glasses and press the power button on the glasses. 1. Press the MENU button on your remote, use the u or d button to select Picture, and then press the ENTERE button. 2. Use the u or d button to select 3D, and then press the ENTERE button. ● The displayed image may differ depending on the model. 3D 3D Mode : Off r 3D Perspective : 0 Depth : 5 L/R Change : L/R Image 3D → 2D : Off EEnter R Return◀ ▶ English 3. Use the u or d button to select 3D Mode, and then press the ENTERE button. 4. Using the l or r buttons on your remote control, select the 3D Mode of the image you want to view. ● The displayed image may differ depending on the model. 3D Mode U Off L Move EEnter R Return◀ ▶ English Supported formats and operating specifications for Standard HDMI 3D N The 3D formats indicated below are recommended by the HDMI association and must be supported. Source signal format Standard HDMI 1.4 3D 1920 x 1080p @ 24 Hz x 2 1920 x 2205p @ 24 Hz 1280 x 720p @ 50 Hz x 2 1280 x 1470p @ 50 Hz◀ ▶ English Before using 3D function... N NOTE ● 3D Mode is set to Off automatically when accessing My Downloads functions. ● 3D Mode is set to memorised configuration value automatically, when changing the input source. ● Some Picture functions are disabled in 3D mode. ● PIP is not supported in 3D mode.◀ ▶ English ● 3D Active Glasses from Samsung’s previous product (IR type) or other manufacturers may not be supported. ● When the TV is initially powered on, may take some time until the 3D display is optimized. ● The 3D Active Glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or TV. If there is a problem, keep other electronic devices as far away as possible from the 3D Active Glasses.◀ ▶ English ● Some files are not supported in the 2D to 3D function. ● Be sure to stay within the viewing angle and optimum TV viewing distance when watching 3D pictures. ● Otherwise, you may not be able to enjoy proper 3D effects. ● The ideal viewing distance should be three times or more the height of the screen. We recommend sitting with viewer’s eyes on a level with the screen. ● When you watch 3D images under flickering lighting such as a fluorescent lamp (50Hz ~ 60Hz) or a 3 wavelength lamp, you may notice some screen flickering. If this occurs, dim or turn off the light.◀ ▶ English ❑ About AllShare™ for PDP 550 Series and above AllShare™ connects your TV and compatible Samsung mobile phones / devices through a network. You can play media contents including videos, photos and music saved on your mobile phones or the other devices (such as your PC) by controlling them on the TV via the network. N For more information, visit “www.samsung.com” or contact the Samsung call centre. Mobile devices may need additional software installation. For details, refer to each device’s user’s guide.◀ ▶ English N If your Samsung TV connects to a non-Samsung DLNA server, a compatibility issue may occur during video playback. N By connecting your Samsung TV to a network via AllShare™, you can use Samsung’s original functions as follows: – Playback of various video formats (DivX, MP4, 3GPP, AVI, ASF, MKV, etc.) – Video thumbnail feature – Bookmark function (to resume video playback) – Auto-chaptering (scene navigation) – Digital content management – Compatibility with various subtitle formats (SRT, SMI, SUB, TXT, TTXT) – Search with file names – And many others N To use the original DLNA functions of Samsung fully, it is recommended that you use the AllShare™ software provided with your TV.◀ ▶ English ❑ Setting Up AllShare™ for PDP 550 Series and above O MENUm → Network → AllShare Settings → ENTERE ■ AllShare Settings ● Media (On / Off): Enables or disables the media function. When the media function is on, Media contents play can be controlled by a mobile phone or other devices that support DLNA DMC. ● The displayed image may differ depending on the model. AllShare Settings Media : Off ► U Move E Enter R Return◀ ▶ English ■ Media Shows a list of mobile phones or connected devices which have been set up with this TV for using the Media function. N The Media function is available in all devices which support DLNA DMC. ● Allowed / Denied: Allows/Blocks the the devices. ● Delete: Deletes the devices from the list. N This function only deletes the name of the device from the list. If the deleted device is turned on or tries to connect to the TV, it may appear on the list again.◀ ▶ English Using the Media Function An alarm window appears informing the user that the media contents (videos, photos, music) sent from a mobile phone will be displayed on your TV. The contents are played automatically 3 seconds after the alarm window appears. If you press the RETURN or EXIT button when the alarm window appears, the media contents are not played. N NOTE ● If the media function executes for the first time, the warning popup window appears. Press the ENTERE button to select Allow, then you can use Media function on that device.◀ ▶ English ● To turn off the media contents transmission from the mobile phone, set Media to Off in the AllShare Settings. ● Contents may not be played on your TV depending on their resolution and format. ● The ENTERE and l / r buttons may not work depending on the type of media content. ● Using the mobile device, you can control the media playing. For details, refer to each mobile’s user’s guide.◀ ▶ English ❑ Setting Up Anynet+ O MENUm → System → Anynet+ (HDMI-CEC) → ENTERE ■ Anynet+ (HDMI-CEC) To use the Anynet+ Function, (Off / On Anynet+ (HDMI-CEC) ) t must be set to On. N When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.◀ ▶ English ■ Auto Turn Off (No / Yes) Setting an Anynet+ Device to turn off automatically when the TV is turned off. N If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off. N May not be enabled depending on the device.◀ ▶ English What is Anynet+?t Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. N NOTE ● You can only control Anynet+ devices using the TV remote control, not the buttons on the TV. ● The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device. ● The Anynet+ functions do not operate with other manufacturers’ products.◀ ▶ English For the method of connecting external devices , refer to the supported user manual. N NOTE ● Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home Theatre. ● When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home Theatre’s Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV.◀ ▶ English ● You can connect only one Home Theatre. ● You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions. ● Anynet+ works when the AV device supporting Anynet+ is in the standby or on status. ● Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.◀ ▶ English Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu Description View TV Changes Anynet+ mode to TV broadcast mode. Device List Shows the Anynet+ device list. (device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear. (device_name) Tools Shows the tools menu of the connected device. E.g. If a DVD recorder is connected, the play menu of the DVD recorder will appear. N Depending on the device, this menu may not be available.◀ ▶ English Anynet+ Menu Description (device_name) Title Menu Shows the title menu of the connected device. E.g. If a DVD recorder is connected, the title menu of the DVD recorder will appear. N Depending on the device, this menu may not be available. Receiver Sound is played through the receiver.◀ ▶ English ❑ Switching between Anynet+ Devices 1. Press the TOOLS button to select Anynet+ (HDMI-CEC). And then press the ENTERE button to select Device List. N If you cannot find a device you want, press the a button to refresh the list. 2. Select a device and press the ENTERE button. You can switch to the selected device. N The Device List menu will only appear when you set Anynet+ (HDMI-CEC) to On in the System menu.◀ ▶ English ● Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation. ● If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.◀ ▶ English ❑ Listening through a Receiver You can listen to sound through a receiver (i.e Home Theatre) instead of the TV Speaker. 1. Select Receiver and set to On. 2. Press the EXIT button to exit. N If your receiver supports audio only, it may not appear in the device list. N The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.◀ ▶ English N When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV (aerial) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the receiver.◀ ▶ English ❑ Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • Only one receiver (home theatre) can be connected. • Check if the Anynet+ device power cord is properly connected. • Check the Anynet+ device’s Video / Audio / HDMI cable connections. • Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. • Check whether the TV remote control is in TV mode. • Check whether the remote control is Anynet+ compatible. • Anynet+ doesn’t work in certain situations. (Searching channels, operating My Downloads or Plug & Play (initial setup), etc.) • When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off and on again. • Check if the Anynet+ Function of Anynet+ device is set on.◀ ▶ English Problem Possible Solution I want to start Anynet+. • Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. • Press the TOOLS button to display the Anynet+ menu and select a menu you want. I want to exit Anynet+. • Select View TV in the Anynet+ menu. • Press the SOURCE button on the TV remote control and select a non- Anynet+ device. The message “Connecting to Anynet+ device...” appears on the screen. • You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. • Use the remote control when the Anynet+ setting or switching to view mode is complete. The Anynet+ device does not play. • You cannot use the play function when Plug & Play (initial setup) is in progress.◀ ▶ English Problem Possible Solution The connected device is not displayed. • Check whether or not the device supports Anynet+ functions. • Check whether or not the HDMI cable is properly connected. • Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. • Search Anynet+ devices again. • You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+ functions. • If connection is terminated because there has been a power interruption or the HDMI cable has been disconnected, please repeat the device scan. The TV sound is not output through the receiver. • Connect the optical cable between TV and the receiver.◀ ▶ English ❑ Using the My Downloads Enjoy photos, music and / or movie files saved on a USB Mass Storage Class (MSC) 1. Press the CONTENT button. 2. Press the u / d / l / r button to select desired menu Videos, Photos, Music then press the ENTERE button. ● The displayed image may differ depending on the model. Videos Photos Music Source Watch TV My Downloads◀ ▶ English ❑ Connecting a USB Device 1. Turn on your TV. 2. Connect a USB device containing photo, music and/or movie files to the USB jack on the side of the TV. 3. When USB is connected to the TV, popup window appears. Then you can select New device connected. ● The displayed image may differ depending on the model. USB◀ ▶ English N It might not work properly with unlicensed multimedia files. N Need-to-Know List before using My Downloads ● MTP (Media Transfer Protocol) is not supported. ● The file system supports FAT16, FAT32 and NTFS. ● Certain types of USB Digital camera and audio devices may not be compatible with this TV. ● My Downloads only supports USB Mass Storage Class (MSC) devices. for PDP 550 and 570 Series MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported). Devices should be connected directly to the TV’s USB port. ● USB (HDD) is not supported. for PDP 450 and 490 Series ◀ ▶ English ● Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. ● Do not disconnect the USB device while it is loading. ● The higher the resolution of the image, the longer it takes to display on the screen. ● The maximum supported JPEG resolution is 15360X8640 pixels. ● For unsupported or corrupted files, the “Not Supported File Format” message is displayed. ● If the files are sorted by Basic View, up to 1000 files can be displayed in each folder. ● If the number of files and folders saved on a USB storage device is approximately over 4000, the files and folders may not appear and some folders may not be opened.◀ ▶ English ● MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a technology that supports the creation, distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements. ● If more than 2 PTP devices are connected, you can only use one at a time. ● If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high power (more than 500mA or 5V) may not be supported. ● If an over-power warning message is displayed while you are connecting or using a USB device, the device may not be recognized or may malfunction.◀ ▶ English ● If the TV has been no input during time set in Auto Protection Time, the Screensaver will run. ● The power-saving mode of some external hard disk drives may be released automatically when connected to the TV. ● If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read. ● If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is not played, connect the USB device to the PC, format the device and check the connection. ● If a file deleted from the PC is still found when My Downloads is run, use the “Empty the Recycle Bin” function on the PC to permanently delete the file.◀ ▶ English ❑ Screen Display Move to the desired file using the l / r / u / d buttons and then press the ENTERE or � (Play) button. The file is played. My Downloads screen may differ depending on the way to enter the screen. Information: Displays the selected content category (Music, for example), device (USB drive,for example), folder/file name, page, and sort criteria. Contents mode / Device name: You can select the desired Content Category or Device. Operation Buttons: ● { Yellow (Edit Mode): Lets you select music by checking the files you want to play. Only available in Music. ● � / µ (Page): Move to next or previous page. ● T Tools: Displays the option menu. ● R Return: Move to the previous page or step. File List Section: Displays files or folders sorted by criteria you can select. { Edit Mode T Tools R Return Music | SUM ⁄ Folder Name > File Name 1/100 pages Folder View Music_3 No singer Music_4 No singer Music_2 No singer Music_5 No singer Music_6 No singer Music_7 No singer Music_8 No singer Music_9 No singer Music_10 No singer Music_1 No Singer◀ ▶ English ■ Videos Playing Video 1. Press the l / r / u / d button to select the desired video in the file list. 2. Press the ENTERE button or � (Play) button. – The selected file name is displayed on the top with its playing time. – If video time information is unknown, play time and progress bar are not displayed. ● The displayed image may differ depending on the model. L Jump T Tools R Return◀ ▶ English – During video playback, you can search using l and r button. – You can use � (REW) and µ (FF) buttons during playback. N In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself. ● Supported Subtitle Formats Name File extension Format MPEG-4 time-based text .ttxt XML SAMI .smi HTML SubRip .srt string-based SubViewer .sub string-based Micro DVD .sub or .txt string-based◀ ▶ English ● Supported Video Formats File Extension Container Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Audio Codec *.avi *.mkv AVI MKV DivX 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8 MP3 / AC3 / LPCM / ADPCM / DTS Core H.264 BP / MP / HP 1920x1080 6 ~ 30 25 MPEG4 SP / ASP 1920x1080 6 ~ 30 8 Motion JPEG 640x480 6 ~ 30 8 *.asf ASF DivX 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8 MP3 / AC3 / LPCM / ADPCM / WMA H.264 BP / MP / HP 1920x1080 6 ~ 30 25 MPEG4 SP / ASP 1920x1080 6 ~ 30 8 Motion JPEG 640x480 6 ~ 30 8 *.wmv ASF Window Media Video v9 1920x1080 6 ~ 30 25 WMA *.mp4 MP4 H.264 BP / MP / HP 1920x1080 6 ~ 30 25 MP3 / ADPCM / MPEG4 SP / ASP 1920x1080 6 ~ 30 8 AAC◀ ▶ English File Extension Container Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Audio Codec *.3gp 3GPP H.264 BP / MP / HP 1920x1080 6 ~ 30 25 ADPCM / AAC / HEAAC MPEG4 SP / ASP 1920x1080 6 ~ 30 8 *.vro VRO VOB MPEG1 1920x1080 24 / 25 / 30 30 AC3 / MPEG MPEG2 1920x1080 24 / 25 / 30 30 / LPCM *.mpg *.mpeg PS MPEG1 1920x1080 24 / 25 / 30 30 AC3 / MPEG / LPCM / AAC MPEG2 1920x1080 24 / 25 / 30 30 H.264 1920x1080 6 ~ 30 25 *.ts *.tp *.trp TS MPEG2 1920x1080 24 / 25 / 30 30 AC3 / AAC / MP3 / DD+ / HE-AAC H.264 1920x1080 6 ~ 30 25 VC1 1920x1080 6 ~ 30 25◀ ▶ English Video Decoder Audio Decoder • Supports up to H.264, Level 4.1 • H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported. • MPEG4 SP, ASP: − Below 1280 x 720: 60 frame max − Above 1280 x 720: 30 frame max • GMC is not supported. • Supports up to WMA 7, 8, 9, STD • WMA 9 PRO does not support 2 channel excess multi channel or lossless audio. • WMA sampling rate 22050Hz mono is not supported.◀ ▶ English Other Restrictions N NOTE ● Video content will not play, or not play correctly, if there is an error in the content or the container. ● Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame / sec listed in the table above. ● If the Index Table is in error, the Seek (Jump) function is not supported. ● You may experience file stuttering while playing a video through a network connection. for PDP 550 and 570 Series ● Video content can not be played, if there are many contents in one file. ● Some USB / digital camera devices may not be compatible with the player. ● When you play video over a network connection, the video may not be played smoothly.◀ ▶ English ■ Music Playing Music 1. Press the l / r / u / d button to select the desired Music in the file list. 2. Press the ENTERE button or � (Play) button. – You can use � (REW) and µ (FF) buttons during playback. ● The displayed image may differ depending on the model. E Pause L Page T Tools R Return Music SUM 1/2◀ ▶ English N Only displays the files with MP3 extension. Other file extensions are not displayed, even if they are saved on the same USB device. N If the sound is abnormal when playing MP3 files, adjust the Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound problem.)◀ ▶ English Playing selected music 1. Press the { (Edit Mode) button. 2. Select the desired music. N The c mark appears to the left of the selected files. 3. Press the TOOLS button and select Play Selected Contents. N You can select or deselect all music pressing the Select All / Deselect All. ◀ ▶ English ■ Photos Viewing a Photo (or Slide Show) 1. Press the l / r / u / d button to select the desired photo in the file list. 2. Press the ENTERE button. ● When a selected photo is displayed, press the ENTERE button to start the slide show. ● During the slide show, all files in the file list will be displayed in order. ● When you press the � (Play) button in the file list, slide show will be started immediately. ● The displayed image may differ depending on the model. E Pause L Previous/Next T Tools R Return Nomal◀ ▶ English N Music files can be automatically played during the Slide Show if the Background Music is set to On. N The Background Music cannot be changed until the BGM has finished loading.◀ ▶ English ❑ My Downloads - Additional Functions Videos / Music / Photos Play Option menu During playing a file, press the TOOLS button. Category Operation Videos Music Photos Title Search You can move directly to another Title. c Time Search You can search the movie using l and r buttons at intervals of 10 seconds. c Shuffle Mode You can play the music randomly. c Repeat Mode You can play movie and music files repeatedly. c c Picture Size You can adjust the picture size to your preference. c◀ ▶ English Category Operation Videos Music Photos Picture Mode You can adjust the picture setting. c c Sound Mode You can adjust the sound setting. c c c Subtitle Language You can view a subtitle. You can select a specific language if the subtitle file contains multiple languages. c Subtitle Setting You can play the video with Subtitles. This function only works if the subtitles are the same file name as the video. c◀ ▶ English Category Operation Videos Music Photos Audio You can enjoy a video in one of the supported languages. The function is only enabled when you play stream-type files which support multiple audio formats. c Start Slide Show / Pause Slide Show You can start or pause a Slide Show. c Slide Show Speed You can select the slide show speed during the slide show. c Background Music You can on / off background music when watching a Slide Show. c Background Music Setting You can select background music when watching a Slide Show. c◀ ▶ English Category Operation Videos Music Photos Zoom You can zoom into images in full screen mode. c Rotate You can rotate images in full screen mode. c Information You can see detailed information about the played file. c c c◀ ▶ English ❑ Teletext Feature The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed. N You can change Teletext pages by pressing the numeric buttons on the remote control. Other Information◀ ▶ English / (Teletext on / mix / off) Activates the Teletext mode for the current channel. Press the button twice to overlap the Teletext mode with the current broadcasting screen. Press it one more time to exit teletext. 8 (store) Stores the Teletext pages. 4 (size) Displays the teletext on the upper half of the screen in double-size. To move the text to the lower half of the screen, press it again. For normal display, press it once again. 9 (hold) Holds the display at the current page, in the case that there are several secondary pages that follow automaticially. To undo, press it again.◀ ▶ English Colour buttons (red, green, yellow, blue) If the FASTEXT system is used by the broadcasting company, the different topics on a Teletext page are colour-coded and can be selected by pressing the coloured buttons. Press the colour corresponding to the topic of your choice. A new colourcoded page is displayed. Items can be selected in the same way. To display the previous or next page, press the corresponding coloured button. 0 (mode) Selects the Teletext mode (LIST / FLOF).If pressed during LIST mode, switches the mode to List save mode. In List save mode, you can save a Teletext page into a list using the 8 (store) button. 1 (sub-page) (size) Displays the available sub-page. 2 (page up) Displays the next Teletext page.◀ ▶ English 3 (page down) Displays the previous Teletext page. 6 (index) Displays the index (contents) page at any time while you are viewing Teletext. 5 (reveal) Displays the hidden text (answers to quiz games, for example). To display the normal screen, press it again. 7 (cancel) Shrinks the Teletext display to overlap with the current broadcast.◀ ▶ English Typical Teletext page Part Contents A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text. F Status information. FASTEXT information.◀ ▶ English ❑ Troubleshooting If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www. samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual. Issues Solutions and Explanations Picture Quality • First of all, please perform the Picture Test and confirm that your TV is properly displaying test image. (go to MENU - Support - Self Diagnosis - Picture Test) If the test image is properly displayed, the poor picture may caused by the source or signal. The TV image does not look as good as it did in the store. • If you have an analogue cable / set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (high definition) picture quality. • Cable / Satellite subscribers: Try HD stations from the channel line up. • Antenna connection: Try HD stations after performing Auto programme.◀ ▶ English Issues Solutions and Explanations The picture is distorted: macro block error, small block, dots, pixelization • Compression of video contents may cause picture distortion especially in fast moving pictures such as sports and action movies. • Low signal level or bad quality can cause picture distortion. This is not a TV issue. • Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and digital TV. Colour is wrong or missing. • If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or loose connections may cause colour problems or a blank screen. There is poor colour or brightness. • Adjust the Picture options in the TV menu (go to Picture mode / Colour / Brightness / Sharpness) • Adjust Energy Saving option in the TV menu (go to MENU – System – Eco Solution – Energy Saving) • Try resetting the picture to view the default picture settings (go to MENU - Picture - Reset Picture)◀ ▶ English Issues Solutions and Explanations There is a dotted line on the edge of the screen. • If the picture size is set to Screen Fit, change it to 16:9. • Change cable / satellite box resolution. The picture is black and white. • If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV. When changing channels, the picture freezes or is distorted or delayed. • If connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the cable box reboots. It may take up to 20 minutes) • Set the output resolution of the cable box to 1080i or 720p. Sound Quality First of all, please perform the Sound Test to confirm that your TV audio is properly operating. (go to MENU - Support - Self Diagnosis - Sound Test) If the audio is OK, the sound problem may caused by the source or signal. There is no sound or the sound is too low at maximum volume. • Please check the volume of the device (Cable / Sat Box, DVD, Blu-ray etc) connected to your TV.◀ ▶ English Issues Solutions and Explanations The picture is good but there is no sound. • Set the Speaker Select option to TV Speaker in the Sound menu. • If you are using an external device, make sure the audio cables are connected to the correct audio input jacks on the TV. • If you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s audio option to HDMI when you have a HDMI connected to your TV). • If you are using a DVI to HDMI cable, a separate audio cable is required. • If your TV has a headphone jack, make sure there is nothing plugged into it. • Reboot the connected device by reconnecting the device’s power cable. The speakers are making an inappropriate noise. • Check cable connections. Make sure a video cable is not connected to an audio input. • For antenna or Cable connections, check the signal strength. Low signal level may cause sound distortion.◀ ▶ English Issues Solutions and Explanations No Picture, No Video The TV turns off automatically. • Ensure the Sleep Timer is set to Off in the System menu. • If your PC is connected to the TV, check your PC power settings. • Make sure the AC power cord is plugged in securely to the wall outlet and the TV. • When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes if there is no signal. RF (Cable / Antenna) Connection The TV is not receiving all channels. • Make sure the coaxial cable is connected securely. • Please try Plug & Play (Initial setup) to add available channels to the channel list. Go to MENU - System - Plug & Play (Initial setup) and wait for all available channels to be stored. • Verify the Antenna is positioned correctly. The picture is distorted: macro block error, small block, dots, pixelization. • Compression of video contents may cause picture distortion, especially with fast moving pictures such as sports and action movies. • A low signal can cause picture distortion. This is not a TV problem.◀ ▶ English Issues Solutions and Explanations PC Connection A “Mode Not Supported” message appears. • Set your PC’s output resolution so it matches the resolutions supported by the TV. “PC” is always shown on the source list, even if a PC is not connected. • This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected. The video is OK but there is no audio. • If you are using an HDMI connection, check the audio output setting on your PC. Network Connection for PDP 550 and 570 Series The wireless network connection failed. • The Samsung Wireless USB dongle is required to use a wireless network. • Make sure the Network Connection is set to Wireless. • Make sure the TV is connected to a wireless IP sharer (router).◀ ▶ English Issues Solutions and Explanations Others The picture won’t display in full screen. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents. • Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV. • Adjust the picture size options on your external device or TV to full screen. Plasma TV is making humming noise. • Plasma TVs typically make a soft humming sound. This is normal. It’s caused by the electrical charges that are used to create the images on the screen. • If the humming sound is loud, you may have set the brightness on the TV too high. Try setting the brightness lower. • You can also have loud humming if the back of your Plasma TV is too close to a wall or other hard surface. Also try rerouting your connection cables. • Improper installation of wall mount can create excessive noise.◀ ▶ English Issues Solutions and Explanations Image Retention (Burn In) Issue. • To minimize the possibility of screen burn, this unit is equipped with screen burn reduction technology. Pixel Shift technology enables you to set picture movement up / down (Vertical Line) and side to side (Horizontal Dot). A “Mode Not Supported” message appears. • Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. Refer to the resolution settings in the user manual. There is a plastic smell from the TV. • This smell is normal and will dissipate over time. The TV Signal Information is unavailable in the Self Diagnosis Test menu. • This function is only available with digital channels from an Antenna / RF / Coax connection. The TV is tilted to the side. • Remove the base stand from the TV and reassemble it. The channel menu is greyed out (unavailable). • The Channel menu is only available when the TV source is selected.◀ ▶ English Issues Solutions and Explanations Your settings are lost after 30 minutes or every time the TV is turned off. • If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change the settings from Store Demo mode to Home Use mode in the Plug & Play procedure. Press the SOURCE button to select TV mode, and go to MENU → System → Plug & Play → ENTERE. You have intermittent loss of audio or video. • Check the cable connections and reconnect them. • Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the TV to a wall, we recommend using cables with 90 degree connectors. You see small particles when you look closely at the edge of the frame of the TV. • This is part of the product’s design and is not a defect.◀ ▶ English Issues Solutions and Explanations The message “Scramble signal” or “Weak Signal / No Signal” appears. • If you are using a CAM CARD (CI / CI+), check that it is installed into the common interface slot. • If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again. The PIP menu is not available. • PIP functionality is only available when you are using a HDMI, PC or Component source. You turned the TV off 45 minutes ago, and it turned on again. • It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst your watching TV. There are recurrent picture sound issues. • Check and change the signal/source. A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture. • To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.◀ ▶ English N Some of above pictures and functions are available at specific models only. N You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com → Support → Downloads) by USB.◀ ▶ English ❑ CONNECTIONS COMMON INTERFACE Slot To watch paid channels, the “CI or CI+ CARD” must be inserted. ● If you don’t insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”. ● The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. ● When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated.◀ ▶ English N NOTE ● You must obtain a “CI or CI+ CARD” from a local cable service provider. ● When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it. ● Insert the “CI or CI+ CARD” in the direction marked on the card. ● The location of the COMMON INTERFACE slot may be different depending on the model. ● “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.◀ ▶ English ● If you have any problems, please contact a service provider. ● Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen. ● When you are watching the satellite TV, remove the “CI or CI+ CARD” of terrestrial and cable. The screen will be distorted or will not be seen.(For Satellite)◀ ▶ English ❑ Anti-theft Kensington Lock The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use. N Please find a “K” icon on the rear of the TV. A Kensington slot is beside the “K” icon. 1 ◀ ▶ English To lock the product, follow these steps: 1. Wrap the Kensington Lock cable around a large, stationary object such as desk or chair. 2. Slide the end of the cable with the lock attached through the looped end of the Kensington Lock cable. 3. Insert the locking device into the Kensington slot on the product 1. 4. Lock the lock. N These are general instructions. For exact instructions, see the User manual supplied with the locking device. N The locking device has to be purchased separately. N The location of the Kensington slot may be different depending on the TV model.◀ ▶ English ❑ Licence TheaterSound, SRS and symbol are trademarks of SRS Labs, Inc. TheaterSound technology is incorporated under licence from SRS Lab, Inc. Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product Includes software. © DTS, Inc. All Rights Reserved.◀ English DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used under licence. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 Open Source Licence Notice In the case of using open source software, Open Source Licences are available on the product menu. Open Source Licence Notice is written only English. BN68-02360A-02 Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Customer Care Centre Web Site AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com/at BELGIUM 02 201 2418 www.samsung.com/be www.samsung.com/be_fr CZECH REPUBLIC 800 - SAMSUNG (800-726786) www.samsung.com/cz Distributor pro Českou republiku: Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8 DENMARK 8 - SAMSUNG (7267864) www.samsung.com/dk EIRE 0818 717 100 www.samsung.com/ie FINLAND 30 - 6227 515 www.samsung.com/fi FRANCE 01 4863 0000 www.samsung.com/fr GERMANY 01805 - SAMSUNG (7267864, € 0.14/Min) www.samsung.de HUNGARY 06 - 80 - SAMSUNG (7267864) www.samsung.com/hu ITALIA 800 - SAMSUNG (7267864) www.samsung.com/it LUXEMBURG 02 261 03 710 www.samsung.com/lu NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com/nl NORWAY 3 - SAMSUNG (7267864) www.samsung.com/no POLAND 0 801 1SAMSUNG(172678) 022 - 607 - 93 - 33 www.samsung.com/pl PORTUGAL 808 20 - SAMSUNG (7267864) www.samsung.com/pt SLOVAKIA 0800 - SAMSUNG (7267864) www.samsung.com/sk SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com/es SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com/se SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) www.samsung.com/ch U.K 0845 SAMSUNG (7267864) www.samsung.com/uk TURKEY 444 77 11 www.samsung.com/tr BELARUS 810-800-500-55-500 - ESTONIA 800-7267 www.samsung.com/ee LATVIA 8000-7267 www.samsung.com/lv LITHUANIA 8-800-77777 www.samsung.com/lt MOLDOVA 00-800-500-55-500 - KAZAHSTAN 8-10-800-500-55-500 www.samsung.com/kz_ru KYRGYZSTAN 00-800-500-55-500 - RUSSIA 8-800-555-55-55 www.samsung.ru TADJIKISTAN 8-10-800-500-55-500 - UKRAINE 8-800-502-0000 www.samsung.com/ua www.samsung.com/ua_ru UZBEKISTAN 8-10-800-500-55-500 www.samsung.com/kz_ru LCD TV user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model Serial No. BN68-02360A_01L09.indb 1 2009-08-31 �� 10:30:34Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. License TruSurround HD, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is incorporated under license from SRS Labs, Inc. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Digital TV Notice 1. Functionalities related to Digital TV(DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C(MPEG2 and MPEG4 AAC) cableTV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal. 2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVBC is that for the broadcast transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video on Demand) and so on, are not included in this specification. So, they cannot be workable at this moment. 3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed. 4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business. 5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers. 6. For more information, please contact your local Samsung customer care centre. Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen Do not display a still image and partially still on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images. © 2009 Samsung Electronics Co., Ltd. All rights reserved. ❑ ❑ ❑ ● ● ● BN68-02360A_01L09.indb 1 2009-08-31 �� 10:30:35English - 1 Symbol N O T Note One-Touch Button TOOLS Button Press ❑ GENERAL INFORMATION Viewing the Control Panel ....................................................2 Accessories ..........................................................................2 Viewing the Connection Panel..............................................3 Remote Control ....................................................................5 Installing Batteries in the Remote Control ............................5 OPERATION Viewing the menus ...............................................................6 Placing Your Television in Standby Mode.............................7 Plug & Play Feature..............................................................7 Viewing the Display ..............................................................8 CHANNEL CONTROL Configuring the Channel Menu.............................................8 Managing Channels ...........................................................11 PICTURE CONTROL Configuring the Picture Menu.............................................13 Using Your TV as a Computer (PC) Display.......................15 Setting up the TV with your PC ..........................................16 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ SOUND CONTROL Configuring the Sound Menu..............................................17 Selecting the Sound Mode .................................................18 SETUP Configuring the Setup Menu...............................................19 INPUT / SUPPORT Configuring the Input Menu ................................................22 Configuring the Support Menu............................................22 RECOMMENDATIONS FOR USE Teletext Feature..................................................................24 Installing the Stand.............................................................25 Installing the Wall Mount Kit ...............................................25 Using the Anti-Theft Kensington Lock ................................26 Securing the Installation Space..........................................26 Securing the TV to the Wall................................................27 Troubleshooting..................................................................28 Specifications .....................................................................31 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ CONTENTS English BN68-02360A_01L09.indb 1 2009-08-31 �� 10:30:35English - 2 GENERAL INFORMATION Viewing the Control Panel The product colour and shape may vary depending on the model. You can use a button by pressing the side panel buttons. 4 1 2 3 5 6 8 8 7 1 SOURCEE: Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control. 2 MENU: Press to see an on-screen menu of your TV’s features. 3Y: Press to increase or decrease the volume. In the on-screen menu, use the Y buttons as you would use the ◄ and ► buttons on the remote control. 4Z: Press to change channels. In the on-screen menu, use the Z buttons as you would use the ▼ and ▲ buttons on the remote control. 5 P (POWER): Press to turn the TV on and off. 6 REMOTE CONTROL SENSOR: Aim the remote control towards this spot on the TV. 7 POWER INDICATOR: Blinks and turns off when the power is on and lights up in stand-by mode. 8 SPEAKERS Accessories (M4 X L16) (M4 X L14) Remote Control & Batteries (AAA x 2) Power Cord Cover-Bottom Stand Screw X 4 Stand Screw X 3 (32inch model only) Cleaning Cloth ● Owner’s Instructions ● Warranty card ● Safety Guide Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. Warranty card / Safety Guide (Not available in all locations) The items colour and shape may vary depending on the model. ¦ N N ¦ N N N BN68-02360A_01L09.indb 2 2009-08-31 �� 10:30:36English - 3 Viewing the Connection Panel The product colour and shape may vary depending on the model. Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable. 1 DIGITAL AUDIO OUT (OPTICAL) Connects to a Digital Audio component such as a Home theatre receiver. When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the Optical jack on the DVD / Blu-ray player or Cable / Satellite Box directly to an Amplifier or Home Theatre, not the TV. 2 PC IN Connect to the video output jack on your PC. 3 ANT IN Connects to an antenna or cable TV system. 4 PC / DVI AUDIO IN Connect to the audio output jack on your PC. DVI audio outputs for external devices. 5 AUDIO OUT [R-AUDIO-L] Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio in connectors on the Amplifier or DVD Home Theatre. ¦ N N N – N – – – – – 9 7 6 8 1 2 3 4 5 6 @ ! 0 [TV Side Panel] [TV Rear Panel] Power Input BN68-02360A_01L09.indb 3 2009-08-31 �� 10:30:37English - 4 6 HDMI IN 1(DVI), 2, 3 Connects to the HDMI jack of a device with an HDMI output. No sound connection is needed for an HDMI to HDMI connection. Use the HDMI IN 1(DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter (DVI to HDMI) for video connection and the PC / DVI AUDIO IN jacks for audio. You can also use the ports to connect to a PC. What is HDMI? ‘High Definition Multimedia interface’ allows the transmission of high definition digital video data and multiple channels of digital audio. The HDMI / DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio. The TV may not output sound and pictures may be displayed with abnormal colour when DVD / Blu-ray player / Cable Boxes / Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 1(DVI) jack and the audio cables to the PC / DVI AUDIO IN jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player / Cable Box / Satellite receiver to confirm the HDMI version, then request a firmware update. HDMI cables that are not 1.3 may cause annoying flicker or no screen display. 7 COMMON INTERFACE Slot When not inserting ‘CI CARD’ in some channels, ‘Scrambled Signal’ is displayed on the screen. The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. When the channel information configuration has finished, the message ‘Updating Completed’ is displayed, indicating that the channel list is now updated. You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it. Insert the CI-Card in the direction marked on it. The place of the COMMON INTERFACE Slot may be different depending on its model. CAM is not supported in some countries and regions, check with your authorized dealer. 8 AV IN [VIDEO] / [R-AUDIO-L] Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder. Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out connectors on the A/V device. 9 KENSINGTON LOCK (depending on the model) The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. If you want to use a locking device, contact the dealer where you purchased the TV. The location of the Kensington Lock may be different depending on its model. 0 COMPONENT IN Connect component video cables (optional) to component connector (PR, PB, Y) on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD. If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector (PR, PB, Y) on your set. The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labelled Y, B-Y and R-Y or Y, Cb and Cr. Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD. ! EXT (RGB) Connector Input Output Video Audio (L / R) RGB Video + Audio (L / R) EXT O O O Only TV or DTV output is available. Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players. @ SERVICE Connector for software upgrades. – N N N N N • • • N N N N – – – N – – – – – – BN68-02360A_01L09.indb 4 2009-08-31 �� 10:30:37English - 5 Remote Control You can use the remote control up to a distance of about 23 feet from the TV. The performance of the remote control may be affected by bright light. The product colour and shape may vary depending on the model. 1 POWER : Television Standby button. 2 NUMERIC BUTTONS : Press to change the channel. 3 FAV.CH : Used to display Favourites Channel Lists on the screen. 4Y : Press to increase or decrease the volume. 5 SOURCE : Press to display and select the available video sources. 6 INFO : Press to display information on the TV screen. 7 TOOLS : Use to quickly select frequently used functions. 8 CH LIST : Displays the Channel List on screen. 9 COLOURS BUTTONS : Use these buttons in the Channel list menus etc. ! TV : Selects the TV mode directly. @ PRE-CH : Enables you to return to the previous channel you were watching. # MUTEM: Press to temporarily cut off the sound. $ P

: Press to change channels. % MENU : Displays the main onscreen menu ^ GUIDE : Electronic Programme Guide (EPG) display & RETURN : Returns to the previous menu * UP▲ / DOWN▼ / LEFT◄ / RIGHT► / ENTERE : Use to select on-screen menu items and change menu values. ( EXIT : Press to exit the menu. ) SUBT. : Digital subtitle display a AD : Audio Description selection. Teletext Functions 5 0 : Teletext mode selection (LIST / FLOF) 6 5 : Teletext reveal 7 4 : Teletext size selection 8 8 : Teletext store 9 Fastext topic selection 0/ : Alternately select Teletext, Double, or Mix. ! :: Exit from the Teletext display @ 1 : Teletext sub page $ 2 : Teletext next page 3 : Teletext previous page % 6 : Teletext index & 9 : Teletext hold ( 7 : Teletext cancel Installing Batteries in the Remote Control 1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size batteries. Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the compartment. 3. Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. If the remote control doesn’t work, check the following: Is the TV power on? Are the plus and minus ends of the batteries reversed? Are the batteries drained? Is there a power outage or is the power cord unplugged? Is there a special fluorescent light or neon sign nearby? ¦ N N N ¦ N N N ● ● ● ● ● 1 2 4 3 5 6 7 8 9 0 ! @ # $ & * ( ) a % ^ BN68-02360A_01L09.indb 5 2009-08-31 �� 10:30:37English - 6 OPERATION Viewing the menus Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions. 1. Press the MENU button. The main menu is displayed on the screen. Its left side has icons: Picture, Sound, Channel , Setup, Input, Application, Support. 2. Press the ▲ or ▼ button to select one of the icons. Press the ◄ or ► button to access the icon’s sub-menu. 3. Press the ▲ or ▼ button to move to items in the menu. Press the ENTERE button to enter items in the menu. 4. Press the ▲/▼/◄/► button to change the selected items. Press the RETURN button to return to the previous menu. 5. Press the EXIT button to exit from the menu. Using the remote control buttons Button Operations Button Operations MENUm Display the main on-screen menu. ▲/▼/◄/►/ ENTERE Move the cursor and select an item. Select the currently selected item. Confirm the setting. RUTURNR Return to the previous menu. EXITe Exit the on-screen menu. Example: Setting the TV’s Brightness in the Picture Menu Adjusting the Brightness to 80 1. Press the MENU button to display the menu. 2. Press the ENTERE button to select Picture. 3. Press the ▲ or ▼ button to select Brightness. 4. Press the ENTERE button. 5. Press the ◄ or ► button until the brightness becomes 80. 6. Press the ENTERE button. Press the EXIT button to exit from the menu. ¦ N  N Mode : Standard ► Backlight : 7 Contrast : 95 Brightness : 45 Sharpness : 50 Colour : 50 Tint (G / R) : G50 / R50 Picture Mode : Standard ► Backlight : 7 Contrast : 95 Brightness : 45 Sharpness : 50 Colour : 50 Tint (G / R) : G50 / R50 Picture Backlight : 7 Contrast : 95 Brightness : 45 ► Sharpness : 50 Colour : 50 Tint (G / R) : G50 / R50 Advanced Settings Picture Options Picture Reset Picture U Move L Adjust E Enter R Return Brightness 45 U Move L Adjust E Enter R Return Brightness 80 Mode : Standard ► Backlight : 7 Contrast : 95 Brightness : 45 Sharpness : 50 Colour : 50 Tint (G / R) : G50 / R50 Picture BN68-02360A_01L09.indb 6 2009-08-31 �� 10:30:38English -  Placing Your Television in Standby Mode Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). 1. Press the POWERP button on the remote control. The screen is turned off and a standby indicator appears on your set. 2. To switch your set back on, simply press the POWERP button again. Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial. Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently. 1. Press the POWER button on the remote control. The message You can set the menu language. is displayed. 2. Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTERE button to confirm your choice. 3. Press the ◄ or ► button to select Store Demo or Home Use, then the ENTERE button. We recommend setting the TV to Home Use mode for the best picture in your home environment. Store Demo mode is only intended for use in retail environments. If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds. 4. Press the ENTERE button. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTERE button to confirm your choice. 5. Press the ▲ or ▼ button to select Air or Cable, then press the ENTERE button. Air: Air antenna signal. Cable: Cable antenna signal. 6. Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTERE button to select Start. Digital & Analogue: Digital and Analogue channels. Digital: Digital channels. Analogue: Analogue channels. When setting the antenna source to Cable, a step appears allowing you to set a value for the digital channel search. For more information, refer to Channel → Auto Store. The channel search will start and end automatically. Press the ENTERE button at any time to interrupt the memorization process. After all the available channels are stored, the message Set the Clock Mode. is displayed. . Press the ENTERE button. Press the ▲ or ▼ button to select Auto, then Press the ENTERE button. If you select Manual, Set current date and time is displayed. If you have received a digital signal, the time will be set automatically. If not, select Manual to set the clock. (refer to page 19) 8. The connection method to provide the best quality HD is offered. After confirming the method, press the ENTERE button. 9. The message Enjoy your TV! is displayed. When you have finished, press the ENTERE button. If you want to reset this feature... 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTERE button. 2. Press the ENTERE button again to select Plug & Play. 3. Enter your 4 digit PIN number. The default PIN number of a new TV set is 0-0-0-0. If you want to change PIN number, use the Change PIN function. (refer to page 21) The Plug & Play feature is only available in the TV mode. ¦ N N ¦ N N N N N N N N N N N N N Plug & Play You can set the menu language. Menu Language : English ► E Enter BN68-02360A_01L09.indb 7 2009-08-31 �� 10:30:38English - 8 Viewing the Display The display identifies the current channel and the status of certain audio-video settings. Press the INFO button to viewing the information. Press the INFO button on the remote control. The TV will display the channel, the type of sound, and the status of certain picture and sound settings. ▲, ▼: You can view other channel’s information. If you want to move to the currently selected channel, press ENTERE button. ◄, ►: You can view the desired program’s information at the current channel. Press the INFO button once more or wait approximately 10 seconds and the display disappears automatically. CHANNEL CONTROL Configuring the Channel Menu Country The PIN number input screen appears. Enter your 4 digit PIN number. Analogue Channel You can change the country for analogue channels. Digital Channel You can change the country for digital channels. Auto Store You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the Child Lock function, the PIN input window appears. Air / Cable Antenna source to memorize Digital & Analogue: Digital and Analogue channels. Digital: Digital channels. Analogue: Analogue channels. When selecting ‘Cable → Digital & Analogue’ or ‘Cable → Digital’ Provide a value to scan for cable channels. Search Mode → Full / Network / Quick Quick Network ID: Displays the network identification code. Frequency: Displays the frequency for the channel. (Differs in each country) Modulation: Displays available modulation values. Symbol Rate: Displays available symbol rates. – – – – Scans for all channels with active broadcast stations and stores them in the TV’s memory. If you want to stop Auto Store, press the ENTERE button. The Stop Auto Store? message will be displayed. Select Yes by pressing the ◄ or ► button, then press the ENTERE button. ¦ O ● ● N ¦ ❑ N   ❑ N  ● ● ● ● N N N Country ► Auto Store Manual Store Cable Search Option Now & Next Guide Full Guide Default Guide : Full Guide Channel DTV Air 15 abc1 18:00 ~ 6:00 18:11 Thu 6 Jan Life On Venus Avenue Unclassified No Detaild Information ' INFO BN68-02360A_01L09.indb 8 2009-08-31 �� 10:30:38English - 9 Manual Store Scans for a channel manually and stores it in the TV’s memory. If a channel is locked using the Child Lock function, the PIN input window appears. Digital Channel Manual store for digital channels. Digital Channel is only available in DTV mode. Channel: Set the Channel number using the ▲, ▼ or number (0~9) buttons. Frequency: Set the frequency using the number buttons. Bandwidth: Set the bandwidth using the ▲, ▼ or number (0~9) buttons. When it has finished, channels are updated in the channel list. Analogue Channel Manual store for analogue channel. Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number (0~9) buttons. Colour System → Auto / PAL / SECAM / NTSC4.43: Sets the colour system value using the ▲ or ▼ button. Sound System → BG / DK / I / L: Sets the sound system value using the ▲ or ▼ button. Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number. You can also select the channel number directly by pressing the number (0~9) buttons. If there is abnormal sound or no sound, reselect the sound standard required. Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen. Store (When you store the channel and associated programme number): Set to OK by pressing the ENTERE button. Channel mode P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode. C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode. S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode. Cable Search Option (depending on the country) Sets additional search options such as the frequency and symbol rate for cable network searches. Frequency (Start ~ Stop): Displays the frequency for the channel. Modulation: Displays available modulation values. Symbol Rate: Displays available symbol rates. Now & Next Guide / Full Guide The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available. For detailed procedures on using Now & Next Guide and Full Guide, refer to the descriptions on page 10. You can also display the guide menu simply by pressing the GUIDE button. (To configure the Default Guide, refer to the descriptions.) Now & Next Guide For the six channels indicated in the left-hand column, displays the Current programme and the Next programme information. Full Guide Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which may be scrolled forwards or backwards in time. ❑ N N  N ● ● ● N  ● ● ● ● N N ● ● N – – – ❑ ● ● ● ❑ N O   BN68-02360A_01L09.indb 9 2009-08-31 �� 10:30:38English - 10 Default Guide → Now & Next Guide / Full Guide You can decide whether to display either the Now & Next Guide or the Full Guide when the GUIDE button on the remote control is pressed. Channel List For detailed procedures on using the Channel List, refer to the ‘Managing Channels’ instructions. You can select these options by simply pressing the CH LIST button on the remote control. Channel Mode When press the P >/< button, Channels will be switched within the selected channel list. Added Ch. Channels will be switched within the memorized channel list. Favourite Ch. Channels will be switched within the favourite channel list. Fine Tune If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. Fine tuned channels that have been saved are marked with an asterisk ‘*’ on the right-hand side of the channel number in the channel banner. To reset the fine-tuning, select Reset by pressing the ▲ or ▼ button and then press the ENTERE button. Only Analogue TV channels can be fine tuned. Using the Now & Next Guide / Full Guide To... Then... Watch a programme in the EPG list Select a programme by pressing the ▲, ▼, ◄, ► button. Exit the guide Press the blue button If the next programme is selected, it is scheduled with the clock icon displayed. If the ENTERE button is pressed again, press the ◄, ► button to select Cancel Schedules, the scheduling is cancelled with the clock icon gone. View programme information Select a programme of your choice by pressing the ▲, ▼, ◄, ► button. Then press the INFO button when the programme of your choice is highlighted. The programme title is on the upper part of the screen centre. Please click on INFO button for detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality Information (HD / SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted programme are included on the detailed information. ‘...’ will be appeared if the summary is long. Toggle between the Now & Next Guide and Full Guide Press the red button repeatedly. In Full Guide Scrolls backwards quickly (24 hours). Scrolls forwards quickly (24 hours). Press the green button repeatedly. Press the yellow button repeatedly. ❑ ❑ O ❑   ❑ N N N Now & Next Guide DTV Cable 900 f tn 2:10 Tue 1 Jun Freshmen On Campus 2:00 - 2:30 No Detailed Information Now Next Mint Extra Loaded Fresh 40 with Dynamite MC The Distillery Smash Hits! Sunday 1 f tn 2 ITV Play 3 Kerrang! 4 Kiss 5 oneword ▼ 6 Smash Hits! Street Hypn.. Kisstory No Information No Information No Information Watch INFO Information ■ Full Guide ■ Exit Full Guide DTV Cable 900 f tn 2:10 Tue 1 Jun Freshmen On Campus 2:00 - 2:30 No Detailed Information Today 2:00 - 3:00 3:00 - 4:00 Mint Extra Loaded Fresh 40 with Dynamite MC The Distillery Smash Hits! Sunday 1 f tn 2 ITV Play 3 Kerrang! 4 Kiss 5 oneword ▼ 6 Smash Hits! No Information Freshmen O.. Watch INFO Information ■ Now/Next ■ +24 Hours ■ Exit BN68-02360A_01L09.indb 10 2009-08-31 �� 10:30:39English - 11 Managing Channels Using this menu, you can Add / Delete or set Favourite channels and use the programme guide for digital broadcasts. All Channels Shows all currently available channels. Added Channels Shows all added channels. Favourites Shows all favourite channels. To select the Favourites channels you have set up, press the FAV.CH button on the remote control. Programmed Shows all current reserved programmes. Select a channel in the All Channels, Added Channels or Favourites screen by pressing the ▲ / ▼ buttons, and pressing the ENTERE button. Then you can watch the selected channel. Using the Colour buttons with the Channel List Red (Channel Type): Toggle between your TV, Radio, Data / Other and All. Green (Zoom): Enlarges or shrinks a channel number. Yellow (Select): Selects multiple channel lists. You can perform the add / delete, add to Favourites / delete from Favourites, or lock / unlock function for multiple channels at the same time. Select the required channels and press the yellow button to set all the selected channels at the same time. The c mark appears to the left of the selected channels. TOOLS (Tools): Displays the Delete (or Add), Add to Favourite (or Delete from Favourite), Lock (or Unlock), Timer Viewing, Edit Channel Name, Sort, Edit Channel Number, Select All (or Deselect All), Auto Store menu. (The Options menus may differ depending on the situation.) Channel Status Display Icons A : An analogue channel. c: A channel selected by pressing the yellow button. * : A channel set as a Favourite. ( : A programme currently being broadcast. \ : A locked channel. ) : A reserved programme Channel List Option Menu (in All Channels / Added Channels / Favourites) Press the TOOLS button to use the option menu. Option menu items may differ depending on the channel status. Add / Delete You can delete or add a channel to display the channels you want. All deleted channels will be shown on All Channels menu. A gray-coloured channel indicates the channel has been deleted. The Add menu only appears for deleted channels. You can also delete a channel from the Added Channels or Favourites menu in the same manner. Add to Favourite / Delete from Favourite You can set channels you watch frequently as favourites. Press the TOOLS button to display the Tools menu. You can also set the add to (or delete from) Favourite by selecting Tools → Add to Favourite (or Delete from Favourite). The ‘*’ symbol will be displayed and the channel will be set as a favourite. All favourite channels will be shown on Favourites menu. ¦    O  N N – – – – N ● ● ● ● ● ● N N  N N N N  T N N 824 UKTV Gold 825 UKTV style A 1 C -- A 2 C -- A 3 ♥ C -- A 4 C -- A 5 C -- A 6 C -- A 7 C -- Added Channels All ■ Channel Type ■ Zoom ■ Select T Tools 824 UKTV Gold 825 UKTV style A 1 C -- A 2 C -- A 3 ♥ C -- A 4 C -- A 5 C -- A 6 C -- A 7 C -- Added Channels All ■ Channel Type ■ Zoom ■ Select T Tools Delete Add to Favourite Lock Timer Viewing Edit Channel Name Sort ▼ BN68-02360A_01L09.indb 11 2009-08-31 �� 10:30:39English - 12 Lock / Unlock You can lock a channel so that the channel cannot be selected and viewed. This function is available only when the Child Lock is set to On. (see page 21) The PIN number input screen appears. Enter your 4 digit PIN number. The default PIN number of a new TV set is 0-0-0-0. You can change the PIN, by selecting Change PIN from the menu. The ‘\’ symbol will be displayed and the channel will be locked. Timer Viewing If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel. To reserve a programme, set the current time first. (See page 19) Only memorized channels can be reserved. You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote control. Reserving a programme will be shown in the Programmed menu. Digital Programme Guide and Viewing Reservation When a digital channel is selected, and you press the ► button, the Programme Guide for the channel appears. You can reserve a programme according to the procedures described above. Edit Channel Name (analogue channels only) Channels can labelled so that their call letters appear whenever the channel is selected. The names of digital broadcasting channels are automatically assigned and cannot be labelled. Edit Channel Number (digital channels only) You can also edit the channel number by pressing the number buttons on the remote control. Sort (analogue channels only) This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store. Select All / Deselect All Select All: You can select all the channels in the channel list. Deselect All: You can deselect all the selected channels. You can only select Deselect All when there is a selected channel. Auto Store For further details on setting up options, refer to page 8. If a channel is locked using the Child Lock function, the PIN input window appears. Channel List Option Menu (in Programmed ) You can view, modify or delete a reservation. Press the TOOLS button to use the option menu. Change Info Select to change a viewing reservation. Cancel Schedules Select to cancel a viewing reservation. Information Select to view a viewing reservation. (You can also change the reservation information.) Select All Select all reserved programmes.  N N N  N N N N  N    ● ● N  N N N     1 / 1 / 2009 13:59 5 TV1 Quincy, M.E 18:59 2 TV3 The Equalizer 20:59 2 TV3 McMillan & Wife Programmed All ■ Zoom ■ Select T Tools E Information Change Info Cancel Schedules Information Select All BN68-02360A_01L09.indb 12 2009-08-31 �� 10:30:39English - 13 PICTURE CONTROL Configuring the Picture Menu Mode You can select the type of picture which best corresponds to your viewing requirements. Press the TOOLS button to display the Tools menu. You can also set the picture mode by selecting Tools → Picture Mode. Dynamic Selects the picture for high-definition in a bright room. Standard Selects the picture for the optimum display in a normal environment. Movie Selects the picture for viewing movies in a dark room. Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R) Your television has several setting options that allow you to control the picture quality. Backlight: Adjusts the brightness of LCD back light. Contrast: Adjusts the contrast level of the picture. Brightness: Adjusts the brightness level of the picture Sharpness: Adjusts the edge definition of the picture. Colour: Adjusts colour saturation of the picture. Tint (G/R): Adjusts the colour tint of the picture. Select a picture mode to be adjusted first. The adjusted values are saved for each picture mode. When you make changes to Backlight, Contrast, Brightness, Sharpness, Colour or Tint (G/R), the OSD will be adjusted accordingly. In analogue TV, Ext., AV modes of the PAL system, you cannot use the Tint (G/R) Function. In PC mode, you can only make changes to Backlight, Contrast and Brightness. Settings can be adjusted and stored for each external device you have connected to an input of the TV. The energy consumed during use can be significantly reduced if the brightness level of the picture is reduced, which will reduce the overall running cost. Advanced Settings Samsung’s new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed picture settings. Advanced Settings is available in Standard or Movie mode. In PC mode, you can only make changes to Gamma and White Balance from among the Advanced Settings items. Black Tone → Off / Dark / Darker / Darkest You can select the black level on the screen to adjust the screen depth. Dynamic Contrast → Off / Low / Medium / High You can adjust the screen contrast so that the optimal contrast is provided. Gamma You can adjust the Primary Colour (Red, Green, Blue) Intensity. Colour Space Colour Space is a colour matrix composed of red, green and blue colours. Select your favourite Colour Space to experience the most natural colour. Native: Native Colour Space offers deep and rich colour tone. Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on programme sources. ¦ ❑ T    ❑ ● ● ● ● ● ● N N N N N N ❑ N N     ● ● Mode : Standard ► Backlight : 7 Contrast : 95 Brightness : 45 Sharpness : 50 Colour : 50 Tint (G / R) : G50 / R50 Picture Colour : 50 Tint (G / R) : G50 / R50 Advanced Settings ► Picture Options Picture Reset Picture BN68-02360A_01L09.indb 13 2009-08-31 �� 10:30:40English - 14 White Balance You can adjust the colour temperature for more natural picture colours. R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain: You can adjust the Colour ‘temperature’ in the light areas by changing the values of R, G, B. Recommended for advanced users only. Reset: The previously adjusted white balance will be reset to the factory defaults. Flesh Tone You can emphasize the pink ‘flesh tone’ in the picture. Changing the adjustment value will refresh the adjusted screen. Edge Enhancement → Off / On You can emphasize object boundaries in the picture. Picture Options In PC mode, you can only make changes to the Colour Tone and Size from among the items in Picture Options. Colour Tone → Cool / Normal / Warm1 / Warm2 You can select the most comfortable colour tone to your eyes. Settings can be adjusted and stored for each external device you have connected to an input of the TV. Warm1 or Warm2 is only activated when the picture mode is Movie. Size You can select the picture size which best corresponds to your viewing requirements. Press the TOOLS button to display the Tools menu. You can also set the size by selecting Tools → Picture Size. Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio. 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting. Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size. 4:3: This is the default setting for a video movie or normal broadcasting. Screen Fit: Use the function to see the full image without any cut-off when HDMI (720p / 1080i) or Component (1080i) signals are input. Depending on the input source, the picture size options may vary. The items available may differ depending on the selected mode. In PC Mode, only 16:9 and 4:3 mode can be adjusted. Settings can be adjusted and stored for each external device you have connected to an input of the TV. Temporary image retention may occur when viewing a static image on the set for more than two hours. Wide Zoom: Press the ► button to Select Position, then press the ENTERE button. Press the ▲ or ▼ button to move the picture up / down. Then press the ENTERE button. Zoom: Press the ► button to Select Position, then press the ENTERE button. Press the ▲ or ▼ button to move the picture up and down. Then press the ENTERE button. Press the ► button to Select Size, then press the ENTERE button. Press the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTERE button. After selecting Screen Fit in HDMI (1080i) or Component (1080i) mode: Select Position by pressing the ◄ or ► button. Use the ▲, ▼, ◄ or ► button to move the picture. Reset: Press the ◄ or ► button to select Reset, then press the ENTEREbutton. You can initialize the setting. If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the Overscan function. Screen Mode → 16:9 / Wide Zoom / Zoom / 4:3 When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it. 16:9: Sets the picture to 16:9 wide mode. Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnify the size of the picture vertically on screen. 4:3: Sets the picture to 4:3 normal mode. This function is available in Auto Wide mode. This function is not available in PC, Component or HDMI mode.  ● ●  N  ❑ N  N N  T ● ● ● ● ● ● N N N N N N N N N  ● ● ● ● N N BN68-02360A_01L09.indb 14 2009-08-31 �� 10:30:40English - 15 Digital NR → Off / Low / Medium / High / Auto If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. When the signal is weak, select one of the other options until the best picture is displayed. HDMI Black Level → Normal / Low You can directly select the black level on the screen to adjust the screen depth. This function is active only when the external input connects to HDMI (RGB signals). Film Mode → Off / Auto The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality. Film Mode is supported in TV, AV, COMPONENT(480i / 1080i) and HDMI(480i / 1080i). Picture Reset → Reset Picture Mode / Cancel Resets all picture settings to the default values. Select a picture mode to be reset. The reset is performed for each picture mode. Reset Picture Mode: Current picture values return to default settings.  N  N  N ❑ N ● Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. First, click on ‘Control Panel’ on the Windows start menu. 2. When the control panel window appears, click on ‘Appearance and Themes’ and a display dialog-box will appear. 3. When the control panel window appears, click on ‘Display’ and a display dialogbox will appear. 4. Navigate to the ‘Settings’ tab on the display dialog-box. The correct size setting (resolution): Optimum-1360 x 768 pixels If a vertical-frequency option exists on your display settings dialog box, the correct value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box. ¦ BN68-02360A_01L09.indb 15 2009-08-31 �� 10:30:40English - 16 Display Modes Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended. D-Sub and HDMI/DVI Input Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V) IBM 640 x 350 31.469 70.086 25.175 +/- 720 x 400 31.469 70.087 28.322 -/+ MAC 640 x 480 35.000 66.667 30.240 -/- 832 x 624 49.726 74.551 57.284 -/- VESA CVT 720 x 576 35.910 59.950 32.750 -/+ 1280 x 720 44.772 59.855 74.500 -/+ 1280 x 720 56.456 74.777 95.750 -/+ VESA DMT 640 x 480 31.469 59.940 25.175 -/- 640 x 480 37.500 75.000 31.500 -/- 640 x 480 37.861 72.809 31.500 -/- 800 x 600 37.879 60.317 40.000 +/+ 800 x 600 46.875 75.000 49.500 +/+ 800 x 600 48.077 72.188 50.000 +/+ 1024 x 768 48.363 60.004 65.000 -/- 1024 x 768 56.476 70.069 75.000 -/- 1024 x 768 60.023 75.029 78.750 +/+ 1360 x 768 47.712 60.015 85.500 +/+ VESA GTF 1280 x 720 52.500 70.000 89.040 -/+ When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. The interlace mode is not supported. The set might operate abnormally if a non-standard video format is selected. Separate and Composite modes are supported. SOG is not supported. Setting up the TV with your PC Preset: Press the SOURCE button to select PC mode. Auto Adjustment Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically. This function does not work in DVI-HDMI mode. Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment by selecting Tools → Auto Adjustment. Screen Coarse / Fine The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on the centre of screen. PC Position Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position. Image Reset You can replace all image settings with the factory default values.  N N N N ¦ N ❑ N T ❑    Brightness: : 45 Sharpness : 50 Auto Adjustment ► Screen Advanced Settings Picture Options Picture Reset Picture BN68-02360A_01L09.indb 16 2009-08-31 �� 10:30:40English - 1 SOUND CONTROL Configuring the Sound Menu Mode → Standard / Music / Movie / Clear Voice / Custom You can select a sound mode to suit your personal preferences. Press the TOOLS button to display the Tools menu. You can also configure the sound mode by selecting Tools → Sound Mode. Standard Selects the normal sound mode. Music Emphasizes music over voices. Movie Provides the best sound for movies. Clear Voice Emphasizes voice over other sounds. Custom Recalls your customized sound settings. Equalizer The sound settings can be adjusted to suit your personal preferences. Mode You can select a sound mode to suit your personal preferences. Balance Controls the balance between the right and left speakers. 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment) To adjust the level of different bandwidth frequencies Reset Resets the equalizer settings to the default values. SRS TruSurround HD → Off / On SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. Audio Language (digital channels only) You can change the default value for audio languages. Displays the language information for the incoming stream. You can only select the language among the actual languages being broadcast. While viewing a digital channel, this function can be selected. Audio Format → MPEG / Dolby Digital (digital channels only) When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function. The Audio Format appears according to the broadcasting signal. While viewing a digital channel, this function can be selected. ¦ ❑ T      ❑     ❑ ❑ N N ❑ N N Mode : Custom ► Equalizer SRS TruSurround HD : Off Audio Language : - - - Audio Format : - - - Audio Description Auto Volume : Off Sound BN68-02360A_01L09.indb 17 2009-08-31 �� 10:30:40English - 18 Audio Description (digital channels only) This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the Audio Description On or Off and control the volume. Press the AD button on the remote control to select Off or On. Audio Description → Off / On Turn the audio description function on or off. Volume You can adjust the audio description volume. Volume is active when Audio Description is set to On. Auto Volume → Off / On Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. Speaker Select → External Speaker / TV Speaker If you want to hear the sound through separate speakers, cancel the internal amplifier. The volume and MUTE buttons do not operate when the Speaker Select is set to External Speaker. If you select External Speaker in the Speaker Select menu, the sound settings will be limited. Sound Reset → Reset All / Reset Sound Mode / Cancel You can restore the Sound settings to the factory defaults. Selecting the Sound Mode You can set the sound mode in the Tools menu. When you set to Dual l ll, the current sound mode is displayed on the screen. Audio Type Dual 1 / 2 Default A2 Stereo Mono MONO Automatic change Stereo STEREO ↔ MONO Dual DUAL 1 ↔ DUAL 2 DUAL 1 NICAM Stereo Mono MONO Automatic change Stereo MONO ↔ STEREO Dual MONO ↔ DUAL 1 DUAL 2 DUAL 1 If the stereo signal is weak and an automatic switching occurs, then switch to the mono. This function is only activated in stereo sound signal. It is deactivated in mono sound signal. This function is only available in TV mode. ❑ O   N ❑ ❑ N N ❑ ¦ N N N BN68-02360A_01L09.indb 18 2009-08-31 �� 10:30:40English - 19 SETUP Configuring the Setup Menu Menu Language You can set the menu language. Time Clock Setting the clock is necessary in order to use the various timer features of the TV. The current time will appear every time you press the INFO button. If you disconnect the power cord, you have to set the clock again. Clock Mode You can set up the current time manually or automatically. Auto: Set the current time automatically using the time from the digital broadcast. Manual: Set the current time to a manually specified time. Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time manually. The Antenna or cable must be connected in order to set the time automatically. Clock Set You can set the current time manually. Set up this item when you have set Clock Mode to Manual. You can set the day, month, year, hour and minute directly by pressing the number buttons on the remote control. Sleep Timer → Off / 30 min / 60 min / 90 min / 120 min / 150 min / 180 min The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes). The TV automatically switches to standby mode when the timer reaches 0. To cancel the Sleep Timer function, select Off. Press the TOOLS button to display the Tools menu. You can also set the sleep timer by selecting Tools → Sleep Timer. Timer 1 / Timer 2 / Timer 3 Three different on / off timer settings can be made. You must set the clock first. On Time: Set the hour, minute, and activate / inactivate. (To activate the timer with the setting you’ve chosen, set to Activate.) Off Time: Set the hour, minute, and activate / inactivate. (To activate the timer with the setting you’ve chosen, set to Activate.) Volume: Select the desired turn on volume level. Antenna: Select Air or Cable. Channel: Select the desired channel. Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. When Manual is selected, press the ► button to select the desired day of the week. Press the ENTERE button over the desired day and the c mark will appear. You can set the hour, minute and channel by pressing the number buttons on the remote control. Auto Power Off When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too long time. ¦ ❑ ❑  N N ● – – N N ● N N  N N T  ● ● ● ● ● ● N N N Plug & Play Menu Language : English ► Time Broadcast Security General Setup BN68-02360A_01L09.indb 19 2009-08-31 �� 10:30:41English - 20 Broadcast Subtitle You can activate and deactivate the subtitles. Use this menu to set the Subtitle Mode. Normal under the menu is the basic subtitle and Hard of hearing is the subtitle for a hearing-impaired person. Subtitle → Off / On : Switches subtitles on or off. Mode → Normal / Hard of hearing: Sets the subtitle mode. Subtitle Language: Set the subtitle language. If the programme you are watching does not support the Hard of hearing function, Normal automatically activates even though Hard of hearing mode is selected. English is the default in cases where the selected language is unavailable in the broadcast. You can select these options simply by pressing the SUBT. button on the remote control. Digital Text → Disable / Enable (UK only) If the programme is broadcast with digital text, this feature is enabled. MHEG (Multimedia and Hypermedia Information Coding Experts Group) An International standard for data encoding systems used in multimedia and hypermedia. This is at a higher level than the MPEG system which includes data-linking hypermedia such as still images, character service, animation, graphic and video files as well as multimedia data. MHEG is user runtime interaction technology and is being applied to various fields including VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), tele-education, tele-conferencing, digital libraries and network games. Teletext Language You can set the Teletext language by selecting the language type. English is the default in cases where the selected language is unavailable in the broadcast. Preference Primary Audio Language / Secondary Audio Language / Primary Subtitle Language / Secondary Subtitle Language / Primary Teletext Language / Secondary Teletext Language Using this feature, users can select one of the languages. The language selected here is the default when the user selects a channel. If you change the language setting, the Subtitle Language, Audio Language, and the Teletext Language of the Language menu are automatically changed to the selected language. The Subtitle Language, Audio Language, and the Teletext Language of the Language menu show a list of languages supported by the current channel and the selection is highlighted. If you change this language setting, the new selection is only valid for the current channel. The changed setting does not change the setting of the Primary Subtitle Language, Primary Audio Language, or the Primary Teletext Language of the Preference menu. Common Interface CI Menu This enables the user to select from the CAM-provided menu. Select the CI Menu based on the menu PC Card. Application Info. This contains information on CAM inserted in the CI slot and displays it. The Application Info inserting is about the ‘CI CARD’. You can install the CAM anytime whether the TV is ON or OFF. 1. Purchase the CI CAM module by visiting your nearest dealer or by phone. 2. Insert the ‘CI CARD’ into the CAM in the direction of the arrow until it fits. 3. Insert the CAM with the ‘CI CARD’ installed into the common interface slot. (Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.) 4. Check if you can see a picture on a scrambled signal channel. CAM is not supported in some countries and regions, check with your authorized dealer. ❑  ● ● ● N N O  N  N  ●  ● ● N N BN68-02360A_01L09.indb 20 2009-08-31 �� 10:30:41English - 21 Security Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number. The default PIN number of a new TV set is 0-0-0-0. You can change the PIN by selecting Change PIN from the menu. Child Lock → Off / On This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by muting out video and audio. You can lock some channels in Channel List. (refer to page 12) Child Lock is available only in TV mode. Parental Lock This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by a 4-digit PIN (Personal Identification Number) code that is defined by the user. The Parental Lock item differs depending on the country. When the Parental Lock is set, the ‘\’ symbol is displayed. Allow All: Press to unlock all TV ratings. Block All: Press to lock all TV ratings. Change PIN You can change your personal ID number that is required to set up the TV. If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to 0-0-0-0: POWER(Off) → MUTE → 8 → 2 → 4 → POWER(On). General Game Mode → Off / On When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting the game menu. To disconnect the game console and connect another external device, cancel game mode in the setup menu. If you display the TV menu in Game Mode, the screen shakes slightly. Game Mode is not available in regular TV and PC mode. If Game Mode is On: Picture mode is automatically changed to Standard and users cannot change the mode. Sound mode is automatically changed to Custom and users cannot change the mode. Adjust the sound using the equalizer. The Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer settings to the factory defaults. Energy Saving → Off / Low / Medium / High / Picture Off / Auto This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the Energy Saving mode option to High to reduce eye fatigue as well as power consumption. If you select Picture Off, the screen is turned off and you can only hear the sound. Press any button to get out of Picture Off. In the Tools menu, Picture Off function is not supported. Press the TOOLS button to display the Tools menu. You can also set the Energy Saving option by selecting Tools → Energy Saving. Melody → Off / Low / Medium / High A melody sound can be set to come on when the TV is powered On or Off. The Melody does not play When no sound is output from the TV because the MUTE button has been pressed. When no sound is output from the TV because the (–) Volume button has been pressed. When the TV is turned off by Sleep Timer function. ❑  N N  N N N  N ❑  N N N N – – N  N T  N – – – BN68-02360A_01L09.indb 21 2009-08-31 �� 10:30:41English - 22 INPUT / SUPPORT Configuring the Input Menu Source List Use to select TV or other external input sources such as DVD / Blu-ray players / Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. Press the SOURCE button on the remote control to vi7ew an external signal source. TV mode can be selected by pressing the TV button. TV / Ext. / AV / Component / PC / HDMI1/DVI / HDMI2 / HDMI3 You can choose only those external devices that are connected to the TV. In the Source List, connected inputs will be highlighted and sorted to the top. Inputs that are not connected will be sorted to the bottom. Ext. and PC always stay activated. TOOLS (Tools): Displays the Edit Name and Information menus. Edit Name Name the device connected to the input jacks to make your input source selection easier. VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI / DVI PC / TV / IPTV / Blu-ray / HD DVD / DMA When connecting an HDMI/DVI cable to the HDMI IN 1(DVI) port, you should set the HDMI1/DVI mode to DVI or DVI PC in the Edit Name of the Input mode. In this case, a separate sound connection is required. Configuring the Support Menu Self Diagnosis Picture Test If you think you have a picture problem, perform the picture test. Check the colour pattern on the screen to see if the problem still exists. Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes. There may be a problem with the TV. Contact Samsung’s call centre for assistance. No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer to the external device’s user manual. Sound Test If you think you have a sound problem, please perform the sound test. You can check the sound by playing a built-in melody sound through the TV. ‘Does the problem still exist with this sound test?’ appears on the screen. If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV speaker in the Sound menu. The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button. Yes: If during the sound test you can hear sound only from one speaker or not at all, select Yes. There may be a problem with the TV. Contact Samsung’s call centre for assistance. No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer to the external device’s user manual. Signal Information (digital channels only) Unlike analogue channels, which can vary in reception quality from ‘snowy’ to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analogue channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels. If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal. ¦ ❑ O  N N N ❑  N ¦ ❑  ● ●  N N ● ●  N Source List Edit Name Input Self Diagnosis ► Software Upgrade HD Connection Guide Contact Samsung Support BN68-02360A_01L09.indb 22 2009-08-31 �� 10:30:41English - 23 Software Upgrade To keep your product up-to-date with new Digital Television features then software upgrades are periodically broadcast as part of the normal Television signal. It will automatically detect these signals and display the software upgrade banner. You are given the option to install the upgrade. BY USB Insert a USB drive containing the firmware upgrade into TV. Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the update is completed. When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade. BY Channel Upgrades the software using the broadcasting signal. If the function is selected during the software transmission period, this function searches for available software and downloads the software. The time required to download the software is determined by the signal status. Standby Mode Upgrade To continue software upgrade with master power on, Select On by pressing the ▲ or ▼ button. 45 minutes after entering standby mode, a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen may be on slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software upgrade is completed. Alternative Software To display the software version information. HD Connection Guide This menu presents the connection method that provides the optimal quality for the HD TV. Refer to this information when connecting external devices to the TV. Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software. You can view the information regarding the call centre, product and software file download method. ❑   N N   ❑ ❑ TV Rear Panel USB Drive BN68-02360A_01L09.indb 23 2009-08-31 �� 10:30:42English - 24 RECOMMENDATIONS FOR USE Teletext Feature Most television stations provide written information services via Teletext. The index page of the Teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons. For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed. You can change Teletext pages by pressing the numeric buttons on the remote control. 1 0 (mode) Press to select the Teletext mode (LIST/FLOF). If you press it in the LIST mode, it switches into the List save mode. In the List save mode, you can save Teletext page into list using the 8(store) button. 2 5 (reveal) Used to display the hidden text (answers to quiz games, for example). To display normal screen, press it again. 3 4 (size) Press to display the double-size letters in the upper half of the screen. For lower half of the screen, press it again. To display normal screen, press it once again. 4 8 (store) Used to store the Teletext pages. 5 Colour buttons (red/green/yellow/ blue) If the FASTEXT system is used by a broadcasting company, the different topics covered on a Teletext page are colour-coded and can be selected by pressing the coloured buttons. Press one of them corresponding to the required. The page is displayed with other coloured information that can be selected in the same way. To display the previous or next page, press the corresponding coloured button. 6/ (Teletext on/mix) Press to activate Teletext mode after selecting the channel providing the Teletext service. Press it twice to overlap the Teletext with the current broadcasting screen. 7 : (exit) Exit from the Teletext display. 8 1 (sub-page) Used to display the available sub-page. 9 2 (page up) Used to display the next Teletext page. 0 3 (page down) Used to display the previous Teletext page. ! 9 (hold) Used to hold the display on a given page if the selected page is linked with several secondary pages which follow on automatically. To resume, press it again. @ 6 (index) Used to display the index (contents) page at any time while you are viewing Teletext. # 7 (cancel) Used to display the broadcast when searching for a page. The Teletext pages are organized according to six categories: Part Contents A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text. F Status information. FASTEXT information. ¦ N N 1 2 3 4 5 6 8 9 0 ! # @ 7 BN68-02360A_01L09.indb 24 2009-08-31 �� 10:30:42English - 25 Teletext information is often divided between several pages displayed in sequence, which can be accessed by: Entering the page number Selecting a title in a list Selecting a coloured heading (FASTEXT system) Teletext level supported by the TV is version 2.5 which is capable of displaying additional graphics or text. Depending upon the transmission, blank side panels can occur when displaying Teletext. In these cases, additional graphics or text is not transmitted. Older TV’s which do not support version 2.5 are not capable of displaying any additional graphics or text, regardless of the Teletext transmission. Press the TV button to exit from the Teletext display. Teletext 16:9, picture is 16:9 Installing the Stand Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to 32inch models only. 1. Attach your LCD TV to the stand. Two or more people should carry the TV. Make sure to distinguish between the front and back of the stand when assembling them. To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper left of right sides of the TV. 2. Fasten two screws at position 1 and then fasten two screw at position 2. Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to one side. Installing the Wall Mount Kit Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own. Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock. N – – – N N N N O N ¦ N N N N N ¦ Back Front BN68-02360A_01L09.indb 25 2009-08-31 �� 10:30:43English - 26 Using the Anti-Theft Kensington Lock The Kensington Lock is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use. The locking device has to be purchased separately. The location of the Kensington Lock may be different depending on its model. 1. Insert the locking device into the Kensington slot on the LCD TV (1) and turn it in the locking direction (2). 2. Connect the Kensington Lock cable (3). 3. Fix the Kensington Lock to a desk or a heavy stationary object. 3 1 2 Securing the Installation Space Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product. Install the product so the required distances shown in the figure are kept. When using a stand or wall-mount, use parts provided by Samsung Electronics only. If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling. If you use parts provided by another manufacturer, it may result in a problem with the product or fire due to an increase in the internal temperature of the product due to poor ventilation. The appearance may differ depending on the product. When installing the product with a stand When installing the product with a wall-mount 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm ¦ ¦ N   N BN68-02360A_01L09.indb 26 2009-08-31 �� 10:30:44English - 2 Securing the TV to the Wall Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows. To avoid the TV from falling: 1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto the wall. You may need additional material such as an anchor depending on the type of wall. Since the necessary clamps, screws, and string are not supplied, please purchase these additionally. 2. Remove the screws from the centre back of the TV, put the screws into the clamps, and then fasten the screws onto the TV again. Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications. Screw Specifications For a 17 ~ 29 Inch LCD TV: M4 X L15 For a 32 ~ 40 Inch LCD TV: M6 X L15 3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly. Install the TV near to the wall so that it does not fall backwards. It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV. Untie the string before moving the TV. 4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer. ¦  N N N N – – N N N Wall Wall BN68-02360A_01L09.indb 27 2009-08-31 �� 10:30:44English - 28 Troubleshooting If you have any questions of TV, first refer to this list. If none of these troubleshooting tips apply, please visit ‘www.samsung.com’ site, then click on Support or contact Call Centre on list of last page. Issue Solution Picture Quality First of all, please perform the Picture Test to confirm that your TV is properly displaying test image. Go to MENU - Support - Self Diagnosis - Picture Test If the test image is properly displayed, the poor picture may caused by the source or signal. ● TV image does not look as good as it did in the store. If you have an analogue Cable/Set top box, upgrade to an Box. Use HDMI or Component cables to deliver HD picture quality. Cable/Satellite subscriber : Try HD(High Definition) stations from channel line up. Antenna connection: Try HD stations after performing Auto programme. Many HD channels are upscaled from SD(Standard Definition) contents. Adjust Cable/Set top box video output resolution to 1080i or 720p. Confirm that you are watching the TV at the minimum distance recomended based on the size and definition of the signal you are displaying. ● ● ● N ● ● Picture is distorted : macroblock, small block, dots, pixelization Compression of video contents may cause picture distortion especially on fast moving pictures such as sports and action movies. Low signal level or bad quality can cause picture distortion. This is not a TV issue. ● ● Wrong or missing colour with Component connection. Make sure the Component cables are connected to the correct jacks. Incorrect or loose connections may cause colour problems or the screen will be blank. ● Poor colour or brightness. Adjust Picture options in the TV menu. (Picture mode, Colour, Brightness, Sharpness) Adjust Energy Saving option in Setup menu. Try picture reset to view the default picture setting. (Go to MENU - Picture - Picture Reset) ● ● ● Dotted line on the edge of screen. If picture size is set to Screen Fit, change to 16:9. Change cable/set top box resolution. ● ● Picture is black and white with AV (Composite) input only. ● Connect video cable(Yellow) to Green jack of component input 1 of the TV. Picture freezes or is distorted when changing channels or picture is delayed. If connected with cable box, please try to reset cable box. (reconnect AC cord and wait until cable box reboots. It may take up to 20 minutes.) Set output resolution of cable box to 1080i or 720p. ● ● Sound Quality First of all, please perform the Sound Test to confirm that your TV audio is properly operating. Go to MENU - Support - Self Diagnosis - Sound Test If the audio is OK, the sound problem may caused by the source or signal. ● No sound or sound is too low at maximum volume. Please check the volume of external device connected to your TV then, adjust the TV volume accordingly. ● Picture is good but no sound. Set the Speaker Select option to TV speaker in the sound menu. Make sure audio cables from an external device are connected to correct audio input jacks on the TV. Check connected device’s audio output option. (ex: You may need to change your cable box’ audio option to HDMI when you have HDMI connected to your TV.) If you are using a DVI to HDMI cable, a separate audio cable is required. Deactivate SRS function if you are setting the volume over 30 value. Remove plug from headphone jack. (if available on your TV) ● ● ● ● ● ● Noise from speaker. Check cable connections. Make sure a video cable is not connected to an audio input. For Antenna/Cable connection, check signal strength. Low signal level may cause sound distortion. ● ● ¦ BN68-02360A_01L09.indb 28 2009-08-31 �� 10:30:44English - 29 Issue Solution No Picture, No Video TV won’t turn on. Make sure the AC power cord is plugged in securely to the wall outlet and the TV. Make sure the wall outlet is working. Try pressing the POWER button on the TV to make sure the remote is working properly. If the TV turns on, it may be caused by Remote Control. To fix the Remote problem, refer to ‘Remote control does not work’ below. ● ● ● TV turns off automatically. Check if the Sleep Timer is set to On in the Setup menu. If connected the TV to your PC, check your PC power settings. Make sure the AC power cord is plugged in securely to the wall outlet and the TV. If there is no signal for about 10 ~ 15 minutes with Antenna/Cable connection, the TV will turn off. ● ● ● ● No picture/Video. Check cable connections.(remove and reconnect all cables of TV and external devices) Set your external device’s (Cable/Set top Box, DVD, Blu-ray etc) video output to match the connections to the TV input. For example, external device’s output: HDMI, TV’s input: HDMI. Make sure your connected device is powered on. Make sure to select the TV’s correct source by pressing the SOURCE button on the TV remote. ● ● ● ● RF(Cable/Antenna) Connection Cannot receive all channels. Make sure Antenna cable is connected securely. Please try Plug & Play to add available channels to the channel list. Go to MENU - Setup - Plug & Play and wait for all avaiable channels are stored. Verify Antenna is positioned correctly. ● ● ● Picture is distorted: macroblock, small block, dots, pixelization Compression of video contents may cause picture distortion especially on fast moving pictures such as sports and action movies. Low signal level can cause picture distortion. This is not a TV issue. ● ● PC Connection ‘Not Supported Mode’ message. Set your PC’s output resolution and frequency so it matches the resolutions supported by the TV. ● PC is always shown on source list even if not connected. This is normal; PC is always shown on the source list even though a PC is not connected. ● Video is OK but there is no audio with HDMI connection. ● Check the audio output setting on your PC. BN68-02360A_01L09.indb 29 2009-08-31 �� 10:30:44English - 30 Issue Solution Others Picture is not shown in full screen. Black bars on each side will be shown on HD channels when displaying upscaled SD (4:3) contents. Black bars on Top & Bottom will be shown on movies that have aspect ratios different from your TV. Adjust picture size option on your external device or TV to full screen. ● ● ● Remote control does not work. Replace the remote control batteries with correct polarity (+ -). Clean the transmission window located on the top of the remote. Try pointing the remote directly at the TV from 5~6 feet away. ● ● ● Can not control TV power or volume with Cable/Set top box remote control. Programme the Cable/Set top box remote control to operate the TV. Refer to Cable/Sat user manual for SAMSUNG TV code. ● ‘Not Supported Mode’ message. Check the supported resolution of the TV and adjust the external device’s output resolution accordingly. Refer to resolution settings in this manual. ● Plastic smell from TV. ● This smell is normal and will dissipate over time. TV Signal Information is unavailable in the Self Diagnostic Test menu. This function is only available with digital channels with an Antenna (RF/Coax) connection. ● TV is tilted to right or left side. ● Remove the stand base from TV and reassemble. Can not assemble stand base. Make sure TV is placed on flat surface. If can not remove screws from TV, please use magnetized screw driver. ● Channel menu is grey out. (unavailable) ● Channel menu is only available when TV source is selected. Your settings are lost after 30 minutes or every time TV is turned off. If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from Store Demo mode to Home Use mode in the Plug & Play procedure. Press the SOURCE button to select TV mode, go to MENU → Setup → Plug & Play → ENTERE. ● Intermittent loss of audio or video. Check cable connections and reconnect. Can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If wall mounting, we recommend using cables with 90 degree connectors. ● ● You may see small particles if you look closely at the edge of the bezel surrounding the TV screen. ● This is part of the product’s design and is not a defect. ‘Scramble signal’ or ‘Weak Signal/ No Signal’ with CAM CARD(CI). Check that CAM has CI Card installed into the common interface slot. Pull out CAM from the TV and insert into the slot again. ● ● When turned off and 45 minutes later, TV is turned on itself. It is normal, the TV operate OTA (Over The Air) function itself to upgrade firmware downloaded during watching. ● Recurrent picture/sound issue. Check and change signal/source. ● This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. N BN68-02360A_01L09.indb 30 2009-08-31 �� 10:30:45English - 31 Specifications Model Name LE26B450 LE32B450 Screen Size (Diagonal) 26 inch 32 inch PC Resolution (Optimum) 1360 x 768 @ 60Hz 1360 x 768 @ 60Hz Sound (Output) 5W X 2 10W X 2 Dimensions (WxDxH) Body With stand 670 x 75 x 455 mm 670 x 216 x 495 mm 800 x 85 x 531 mm 800 x 252 x 577 mm Weight With Stand 8 kg 12 kg Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity 10°C to 40°C (50°F to 104°F) 10% to 80%, non-condensing -20° C to 45°C (-4°F to 113°F) 5% to 95%, non-condensing 10°C to 40°C (50°F to 104°F) 10% to 80%, non-condensing -20°C to 45°C (-4°F to 113°F) 5% to 95%, non-condensing Stand Swivel Left / Right 0˚ -10˚ ~ 10˚ Design and specifications are subject to change without prior notice. This device is a Class B digital apparatus. For the power supply and Power Cons ¦ N N N BN68-02360A_01L09.indb 31 2009-08-31 �� 10:30:45Les figures et illustrations contenues dans ce mode d’emploi sont fournies pour référence uniquement. Elles peuvent différer de l’aspect réel du produit. La conception et les spécifications du produit sont susceptibles d’être modifiées sans préavis. Licence TruSurround HD, SRS et le symbole sont des marques de SRS Labs, Inc. La technologie TruSurround HD est incorporée sous licence de SRS Labs, Inc. Fabriqué sous licence de Dolby Laboratories. Dolby et le symbole du double D sont des marques déposées de Dolby Laboratories. Notifications pour le téléviseur numérique 1. Les fonctions relatives au téléviseur numérique (DVB) ne sont disponibles que dans les pays ou régions où des signaux terrestres numériques de type DVB-T (MPEG2 et MPEG4 AVC) sont diffusés ou dans lesquels vous avez accès à un service de télévision par câble compatible DVB-C (MPEG2 et MPEG4 AAC). Consultez votre distributeur local pour connaître les possibilités de réception des signaux DVB-T ou DVB-C. 2. DVB-T est la norme du consortium européen pour la diffusion de signaux terrestres de télévision numérique. La norme DVBC est quant à elle prévue pour la diffusion des signaux de télévision numérique par câble. Certaines fonctions particulières, telles que le guide électronique des programmes (Electric Program Guide - EPG), la vidéo à la demande (Video on Demand - VOD), etc., ne sont toutefois pas incluses dans cette spécification. Elles ne seront par conséquent pas traitées pour l'instant. 3. Bien que ce téléviseur soit conforme aux dernières normes DVB-T et DVB-C (août 2008), il n'est pas garanti qu'il soit compatible avec les futures diffusions de signaux numériques terrestres DVB-T et par câble DVB-C. 4. En fonction du pays ou de la région où vous vous trouvez, certains opérateurs de télévision par câble peuvent facturer des frais supplémentaires pour un tel service. Vous devrez aussi peut-être accepter les termes et conditions de ces sociétés. 5. Il se peut que certaines fonctions de TV numérique ne soient pas disponibles dans certains pays ou certaines régions et que la réception des signaux DVB-C ne soit pas correcte avec tous les opérateurs. 6. Pour plus d'informations, contactez votre service client Samsung. Précautions à prendre lors de l'affichage d'une image fixe Une image fixe peut occasionner des dommages irrémédiables à l'écran du téléviseur. N'affichez pas d'image fixe ou partiellement fixe sur l'écran LCD pendant plus de 2 heures car cela pourrait provoquer une rémanence de l'image à l'écran. Cette rémanence de l'image est également appelée "brûlure de l'écran". Pour l'éviter, réduisez la luminosité et le contraste de l'écran lorsque vous affichez une image fixe. L'affichage sur l'écran LCD du téléviseur d'images au format 4:3 pendant une période prolongée peut laisser des traces de bordures à gauche, à droite et au centre de l'écran, dues à la différence d'émission de lumière sur celui-ci. La lecture d'un DVD ou l'utilisation d'une console de jeu peut avoir un effet similaire sur l'écran. Les dommages occasionnés par l'effet précité ne sont pas couverts par la garantie. L'affichage d'images fixes de jeux vidéo et d'ordinateurs pendant une période excessive peut produire des rémanences. Pour éviter cela, réduisez la "luminosité" et le "contraste" lors de l'affichage d'images fixes. © 2009 Samsung Electronics Co., Ltd. Tous droits réservés. ❑ ❑ ❑ ● ● ● BN68-02360A_01L09.indb 1 2009-08-31 �� 10:30:45Symboles N O T Remarque Bouton tactile Bouton TOOLS Appuyez sur ❑ INFORMATIONS GÉNÉRALES Présentation du panneau de commande..............................2 Accessoires .........................................................................2 Présentation du panneau de branchement ..........................3 Télécommande.....................................................................5 Insertion des piles dans la télécommande ...........................5 FONCTIONNEMENT Affichage des menus............................................................6 Mise en mode veille de votre téléviseur ...............................7 Fonction Plug & Play ............................................................7 Visualisation de l’affichage ...................................................8 CONTRÔLE DES CHAÎNES Configuration du menu des chaînes.....................................8 Gestion des chaînes ..........................................................11 CONTRÔLE D'IMAGE Configuration du menu Image ............................................13 Utilisation de votre téléviseur comme écran d'ordinateur (PC)....15 Configuration du téléviseur avec le PC ..............................16 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ CONTRÔLE DU SON Configuration du menu Sound............................................17 Sélection du mode son.......................................................18 CONFIGURATION Configuration du menu Configuration.................................19 ENTRÉE / ASSISTANCE Configuration du menu Input ..............................................22 Configuration du menu Support..........................................22 RECOMMANDATION D'UTILISATION Fonction Télétexte..............................................................24 Montage du socle ...............................................................25 Installation du kit de montage mural...................................25 Utilisation du verrou antivol Kensington .............................26 Sécurisation de l'emplacement d'installation......................26 Fixation du téléviseur au mur .............................................27 Dépannage.........................................................................28 Caractéristiques..................................................................31 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ CONTENU Français Français - 1 BN68-02360A_01L09.indb 1 2009-08-31 �� 10:30:45INFORMATIONS GÉNÉRALES Présentation du panneau de commande La couleur et la forme du produit peuvent varier en fonction du modèle. Vous pouvez utiliser un bouton en appuyant sur les boutons du panneau latéral. 4 1 2 3 5 6 8 8 7 1 SOURCEE: Bascule entre toutes les sources d'entrée disponibles. Dans le menu à l'écran, utilisez ce bouton de la même façon que le bouton ENTERE de la télécommande. 2 MENU : Permet d'afficher un menu à l'écran des fonctions du téléviseur. 3Y : Permet d'augmenter ou de baisser le volume. Dans le menu à l'écran, utilisez les boutons Y de la même façon que les boutons ◄ et ► de la télécommande. 4Z: Permet de changer de chaîne. Dans le menu à l'écran, utilisez les boutons Z de la même façon que les boutons ▼ et ▲ de la télécommande. 5 P (ALIMENTATION) : Permet d'allumer et d'éteindre le téléviseur. 6 CAPTEUR DE LA TÉLÉCOMMANDE : Dirigez la télécommande vers ce point du téléviseur. 7 TÉMOIN D'ALIMENTATION : Clignote et s'éteint lorsqu'il est sous tension et s'allume en mode veille. 8 HAUT-PARLEURS Accessoires (M4 X L16) (M4 X L14) Télécommande et piles (AAA x 2) Câble d'alimentation Couvercle-Fond Vis de pied X 4 Vis de pied X 3 (modèle 32 pouces uniquement) Chiffon de nettoyage ● Mode d’emploi ● Carte de garantie ● Manuel de sécurité Vérifiez que les éléments suivants sont fournis avec votre téléviseur LCD. S'il manque des éléments, contactez votre revendeur. Carte de garantie / Manuel de sécurité (non disponible pour tous les pays) La couleur et la forme des éléments peuvent varier en fonction du modèle. ¦ N N ¦ N N N Français - 2 BN68-02360A_01L09.indb 2 2009-08-31 �� 10:30:46Présentation du panneau de branchement La couleur et la forme du produit peuvent varier en fonction du modèle. Lorsque vous branchez un périphérique externe sur votre téléviseur, assurez-vous que celui-ci est éteint. Lorsque vous branchez un périphérique externe, faites correspondre les couleurs de la borne de connexion et du câble. 1 DIGITAL AUDIO OUT (OPTICAL) Pour raccorder un composant audio numérique tel qu'un récepteur home cinéma. Lorsque les prises HDMI IN sont connectées, la prise DIGITAL AUDIO OUT (OPTICAL) du téléviseur produit uniquement un signal audio 2 voies. Pour écouter du son canal 5,1, branchez la prise optique du lecteur DVD / Blu-ray ou du décodeur câble/Décodeur satellite directement sur un amplificateur ou sur un système home cinéma, et non sur le téléviseur. 2 PC IN Pour raccorder la fiche de sortie vidéo de votre PC. 3 ANT IN Pour raccorder une antenne ou un système de câblodiffusion. 4 PC / DVI AUDIO IN Pour raccorder la fiche de sortie audio de votre PC. Sorties audio DVI pour périphériques externes. 5 AUDIO OUT [R-AUDIO-L] Branchez les câbles audio RCA au connecteur AUDIO OUT [R-AUDIO-L] situé à l'arrière de votre poste et les autres extrémités aux connecteurs d'entrée audio correspondants sur l'amplificateur ou le système Home Cinéma. ¦ N N N – N – – – – – 9 7 6 8 1 2 3 4 5 6 @ ! 0 Français - 3 [Panneau latéral du téléviseur] [Panneau arrière du téléviseur] Entrée de l'alimentation BN68-02360A_01L09.indb 3 2009-08-31 �� 10:30:476 HDMI IN 1(DVI), 2, 3 Pour raccorder la fiche HDMI d'un périphérique équipé d'une sortie HDMI. Aucune connexion audio n'est nécessaire pour une connexion HDMI-HDMI. Utilisez la prise HDMI IN 1(DVI) pour une connexion DVI à un périphérique externe. Utilisez un câble ou un adaptateur DVI-HDMI pour la connexion vidéo et les prises PC / DVI AUDIO IN pour le son. Vous pouvez également utiliser les ports pour connecter un PC. Qu'est-ce que HDMI ? La technologie HDMI (High Definition Multimedia interface) permet la transmission de données vidéo numériques haute définition et de plusieurs canaux de son numérique. Le terminal HDMI / DVI prend en charge la connexion DVI vers un périphérique raccordé avec le câble adéquat (non fourni). La différence entre HDMI et DVI est que le périphérique HDMI est plus petit, dispose de la fonction de codage HDCP (High Bandwidth Digital Copy Protection) et prend en charge le son numérique multicanal. Il se peut que le téléviseur n'émette aucun son et que les images s'affichent dans des couleurs anormales en cas de connexion de lecteurs DVD / Blu-ray et décodeurs/récepteurs satellite compatibles avec des versions de HDMI antérieures à HDMI 1.3. Si, lorsque vous branchez un câble HDMI de génération antérieure, aucun son n'est émis, connectez le câble HDMI à la prise HDMI IN 1(DVI) et les câbles audio aux prises PC / DVI AUDIO IN situées à l'arrière du téléviseur. Dans ce cas, contactez la société ayant fourni le lecteur DVD / Blu-ray ou le décodeur câble / récepteur satellite afin de vérifier la version de HDMI, puis demandez une mise à jour du micrologiciel. Des câbles HDMI d'une version autre que 1.3 peuvent provoquer un scintillement à l'écran ou une absence totale d'image. 7 Emplacement COMMON INTERFACE Si vous n'insérez pas la carte d'interface commune (CI CARD) dans certains canaux, le message "Scrambled Signal" s'affiche. Les informations de pairage contenant un numéro de téléphone, l'ID de la CI CARD, l'ID de l'hôte et d'autres informations s'afficheront dans 2 ou 3 minutes. Si un message d'erreur s'affiche, contactez votre fournisseur de service. Lorsque la configuration des informations sur les chaînes est terminée, le message "Updating Completed" s'affiche, indiquant que la liste des chaînes est à jour. Vous devez vous procurer une CI CARD auprès d'un fournisseur local de câblodiffusion. Extrayez la CI CARD en la tirant délicatement. Une chute pourrait l'endommager. Insérez la CI-Card dans le sens indiqué sur celle-ci. L'emplacement de la fente COMMON INTERFACE peut varier en fonction du modèle. Il se peut que le module CAM ne soit pas pris en charge dans certains pays ou régions. Vérifiez auprès de votre revendeur agréé. 8 AV IN [VIDEO] / [R-AUDIO-L] Branchez un câble RCA à un périphérique externe audio/vidéo approprié tel qu'un magnétoscope, un lecteur DVD ou un caméscope. Branchez les câbles audio RCA sur la prise [R-AUDIO-L] du téléviseur et leur autre extrémité sur les prises de sortie audio correspondantes du périphérique audio/vidéo. 9 Verrou KENSINGTON (en fonction du modèle) Le verrou Kensington (en option) est un dispositif permettant de fixer physiquement le système en cas d'utilisation dans un lieu public. Si vous désirez utiliser un dispositif de verrouillage, contactez le revendeur auquel vous avez acheté le téléviseur. L'emplacement du verrou Kensington peut varier en fonction du modèle. 0 COMPONENT IN Branchez les câbles vidéo de composant (en option) aux connecteurs de composant (PR, PB, Y) à l'arrière du téléviseur et les autres extrémités aux connecteurs de sortie vidéo de composant correspondants sur le récepteur DTV ou le lecteur DVD. Si vous souhaitez brancher à la fois le boîtier décodeur et le récepteur DTV (ou lecteur DVD), vous devez brancher le boîtier décodeur au récepteur DTV (ou au lecteur DVD), puis le récepteur DTV (ou lecteur DVD) au connecteur de composant (PR, PB, Y) du téléviseur. Les connecteurs PR, PB et Y de vos composants (récepteur DTV ou lecteur DVD) sont parfois désignés par les lettres Y, B-Y et R-Y ou Y, Cb et Cr. Branchez les câbles audio RCA (en option) sur la prise [R-AUDIO-L] à l'arrière du téléviseur et leur autre extrémité sur les prises de sortie audio correspondantes du récepteur DTV ou du lecteur DVD. ! EXT (RGB) Connecteur Entrée Sortie Vidéo Audio (G / D) RVB Vidéo + Audio (G / D) EXT O O O Seule la sortie TV ou DTV est disponible. Entrées ou sorties pour périphériques externes tels que des magnétoscopes, des lecteurs DVD, des consoles de jeux vidéo ou des lecteurs de vidéodisques. @ SERVICE Connecteur pour mises à niveau logicielles. – N N N N N – – – N N N N – – – N – – – – – – Français - 4 BN68-02360A_01L09.indb 4 2009-08-31 �� 10:30:47Télécommande Vous pouvez utiliser la télécommande jusqu'à une distance maximale d'environ 7 m du téléviseur. Une lumière intense peut affecter le bon fonctionnement de la télécommande. La couleur et la forme du produit peuvent varier en fonction du modèle. 1 POWER : Bouton de mise en veille du téléviseur. 2 TOUCHES NUMÉRIQUES : Permettent de changer de chaîne. 3 FAV.CH : Permet de basculer vers vos chaînes préférées. 4Y : Permet d'augmenter ou de baisser le volume. 5 SOURCE : Permet d'afficher et de sélectionner les sources vidéo disponibles. 6 INFO : Permet d'afficher des informations sur l'écran du téléviseur. 7 TOOLS : Permet de sélectionner rapidement les fonctions fréquemment utilisées. 8 CH LIST : Affiche la liste des chaînes. 9 BOUTONS DE COULEUR : Utilisez ces boutons dans les menus de Liste des chaînes, etc. ! TV : Sélectionne directement le mode TV. @ PRE-CH : Vous permet de revenir à la chaîne que vous regardiez précédemment. # MUTEM : Vous permet de couper le son temporairement. $ P

: Permet de changer de chaîne. % MENU : Affiche le menu principal à l'écran. ^ GUIDE : Affichage du guide électronique des programmes (EPG). & RETURN : Revient au menu précédent * HAUT▲ / BAS▼ / GAUCHE◄ / DROITE► / ENTERE : Permettent de sélectionner des options de menu à l'écran et de modifier des valeurs de menu. ( EXIT : Permet de quitter le menu. ) SUBT. : Affichage numérique des soustitres. a AD : Sélection de la description audio. Fonctions télétexte. 5 0 : Sélection du mode Télétexte (LIST/ FLOF). 6 5 : Activation du télétexte. 7 4 : Sélection de la taille du télétexte. 8 8 : Mémorisation du télétexte. 9 Sélection des rubriques Fastext 0/ : Sélection alternative de Teletext, Double ou Mix. ! :: fermer l'affichage du télétexte. @ 1 : Page secondaire du télétexte. $ 2 : Page de télétexte suivante 3 : Page de télétexte précédente. % 6 : Index du télétexte & 9 : Pause du télétexte. ( 7 : Annulation du télétexte. Insertion des piles dans la télécommande 1. Soulevez le couvercle au dos de la télécommande comme illustré dans la figure. 2. Placez-y deux piles AAA. Assurez-vous que les pôles "+" et "–" des piles correspondent au schéma situé à l'intérieur du compartiment. 3. Replacez le couvercle. Retirez les piles et stockez-les dans un endroit frais et sec si vous n'utilisez pas la télécommande pendant longtemps. Si la télécommande ne fonctionne pas, vérifiez les points suivants : Le téléviseur est-il sous tension ? Les bornes + et - des piles ne sont-elles pas inversées ? Les piles sont-elles déchargées ? Le cordon d'alimentation est-il débranché ou y a-t-il une panne de courant ? Une lampe fluorescente ou néon est-elle allumée à proximité ? ¦ N N N ¦ N N N ● ● ● ● ● Français - 5 1 2 4 3 5 6 7 8 9 0 ! @ # $ & * ( ) a % ^ BN68-02360A_01L09.indb 5 2009-08-31 �� 10:30:47FONCTIONNEMENT Affichage des menus Avant d'utiliser le téléviseur, procédez comme suit pour apprendre à naviguer dans le menu afin de sélectionner et de régler les différentes fonctions. 1. Appuyez sur le bouton MENU. Le menu principal s'affiche à l'écran. Son côté gauche contient des icônes : Image, Son, Canal, Conf., Entrée, Application, Assistance. 2. Appuyez sur le bouton ▲ ou ▼ pour sélectionner l'une des icônes. Appuyez sur le bouton ◄ ou ► pour accéder au sous-menu de l'icône. 3. Appuyez sur le bouton ▲ ou ▼ pour déplacer des options dans le menu. Appuyez sur le bouton ENTERE pour entrer des options dans le menu. 4. Appuyez sur le bouton ▲/▼/◄/► pour modifier les options sélectionnées. Appuyez sur le bouton RETURN pour revenir au menu précédent. 5. Appuyez sur le bouton EXIT pour quitter le menu. Utilisation des boutons de télécommande Bouton Opération Bouton Opération MENUm Afficher le menu principal à l'écran. ▲/▼/◄/►/ ENTERE Déplacer le curseur pour sélectionner un élément. Choisir l'élément sélectionné. Confirmer un paramétrage. RUTURNR Revenir au menu précédent. EXITe Fermer le menu affiché à l'écran. Exemple : configuration de la luminosité du téléviseur dans le menu Image Réglage de la luminosité sur 80 1. Appuyez sur le bouton MENU pour afficher le menu. 2. Appuyez sur le bouton ENTERE pour sélectionner Image. 3. Appuyez sur le bouton ▲ ou ▼ pour régler la Luminosité. 4. Appuyez sur le bouton ENTERE. 5. Appuyez sur le bouton ◄ ou ► jusqu'à ce que la luminosité soit réglée sur 80. 6. Appuyez sur le bouton ENTERE. Appuyez sur le bouton EXIT pour quitter le menu. ¦ N  N Français - 6 Mode : Standard ► Rétroéclairage : 7 Contraste : 95 Luminosité : 45 Netteté : 50 Couleur : 50 Teinte (V / R) : V50 / R50 Image Mode : Standard ► Rétroéclairage : 7 Contraste : 95 Luminosité : 45 Netteté : 50 Couleur : 50 Teinte (V / R) : V50 / R50 Image Rétroéclairage : 7 Contraste : 95 Luminosité : 45 ► Netteté : 50 Couleur : 50 Teinte (V / R) : V50 / R50 Paramètres avancés Options d'image Réinitialisation de l'image Image U Déplacer L Régler E Entrer R Retour Luminosité 45 U Déplacer L Régler E Entrer R Retour Luminosité 80 Mode : Standard ► Rétroéclairage : 7 Contraste : 95 Luminosité : 45 Netteté : 50 Couleur : 50 Teinte (V / R) : V50 / R50 Image BN68-02360A_01L09.indb 6 2009-08-31 �� 10:30:48Mise en mode veille de votre téléviseur Vous pouvez mettre votre téléviseur en mode Veille afin de réduire la consommation électrique. Le mode veille peut être utile si vous souhaitez éteindre votre téléviseur temporairement (pendant un repas par exemple). 1. Appuyez sur le bouton POWERP de la télécommande. L'écran s'éteint et un voyant de veille apparaît sur votre téléviseur. 2. Pour rallumer le téléviseur, appuyez de nouveau sur le bouton POWERP. Ne laissez pas le téléviseur en mode Veille pendant de longues périodes (lorsque vous êtes en vacances par exemple). Il est conseillé de débrancher le téléviseur du secteur et de l'antenne. Fonction Plug & Play Lorsque vous allumez le téléviseur pour la première fois, des réglages de base s'effectuent l'un après l'autre de manière automatique. 1. Appuyez sur le bouton POWER de la télécommande. Le message You can set the menu language. s’affiche. 2. Sélectionnez la langue appropriée en appuyant sur le bouton ▲ ou ▼. Appuyez sur le bouton ENTERE pour confirmer votre choix. 3. Appuyez sur le bouton ◄ ou ► pour sélectionner Enr. démo ou Util. domicile, puis appuyez sur le bouton ENTERE. Nous recommandons de régler le téléviseur sur le mode Util. domicile pour une meilleure qualité d'image dans votre environnement personnel. Enr. démo n'est prévu que pour un usage en magasin. Si l'unité est accidentellement réglée sur le mode Enr. démo et que vous souhaitez revenir au mode Util. domicile (Standard) : Appuyez sur le bouton Volume du téléviseur. Lorsque l'affichage écran du volume apparaît, appuyez pendant 5 secondes sur le bouton MENU du téléviseur. 4. Appuyez sur le bouton ENTERE. Sélectionnez le pays approprié en appuyant sur le bouton ▲ ou ▼. Appuyez sur le bouton ENTERE pour confirmer votre choix. 5. Appuyez sur le bouton ▲ ou ▼ pour sélectionner Hertzien ou Câble, puis appuyez sur le bouton ENTERE. Hertzien: Hertzien signal d'antenne. Câble: Câble signal d'antenne. 6. Appuyez sur le bouton ▲ ou ▼ pour sélectionner la source de chaîne à mémoriser. Appuyez sur le bouton ENTERE pour sélectionner Démarrer. Numérique et Analogique : Chaînes numériques et analogiques. Numérique : Chaînes numériques. Analogique : Chaînes analogiques. Lors du réglage de la source d'antenne sur Câble, une fenêtre s'affiche, qui vous permet de définir une valeur pour la recherche de chaîne numérique. Pour plus d'informations, reportez-vous à Canal → Mémorisation Auto. La recherche de chaînes démarre et se termine automatiquement. Appuyez sur le bouton ENTERE à tout moment pour interrompre la mémorisation. Une fois toutes les chaînes disponibles mémorisées, le message Définit le mode Horloge s'affiche. . Appuyez sur le bouton ENTERE. Appuyez sur le bouton ▲ ou ▼ pour sélectionner Auto., puis appuyez sur le bouton ENTERE. Si vous sélectionnez Manuel, Définit la date et l'heure s'affiche. Si vous recevez un signal numérique, l'heure se règle automatiquement. Sinon, sélectionnez Manuel pour régler l'horloge (voir page 19). 8. La méthode de connexion pour l'obtention de la meilleure qualité HD est proposée. Après avoir confirmé la méthode, appuyez sur le bouton ENTERE. 9. Le message Profitez de votre téléviseur. s'affiche. Lorsque vous avez terminé, appuyez sur le bouton ENTERE. Si vous souhaitez réinitialiser cette fonction... 1. Appuyez sur le bouton MENU pour afficher le menu. Appuyez sur le bouton ▲ ou ▼ pour sélectionner Conf., puis sur le bouton ENTERE. 2. Appuyez de nouveau sur le bouton ENTERE pour sélectionner Plug & Play. 3. Entrez votre code PIN à quatre chiffres. Le code PIN par défaut d'un nouveau téléviseur est 0-0-0-0. Si vous voulez modifier le code PIN, utilisez la fonction Modifier PIN. (voir page 21). La fonction Plug & Play est uniquement disponible en mode TV. ¦ N N ¦ N N N N N N N N N N N N N Français -  Plug & Play You can set the menu language. Menu Language : English ► E Enter BN68-02360A_01L09.indb 7 2009-08-31 �� 10:30:48Visualisation de l’affichage L’affichage identifie la chaîne en cours et l’état de certains paramètres audio et vidéo. Appuyez sur le bouton INFO pour afficher les informations. Appuyez sur le bouton INFO de la télécommande. La télévision affiche la chaîne, le type de son et l’état de certains paramètres de son et d’image. ▲, ▼: Vous pouvez afficher des informations relatives à une autre chaîne. Pour accéder à la chaîne actuellement sélectionnée, appuyez sur le bouton ENTERE. ◄, ►: Vous pouvez afficher les informations relatives au programme souhaité de la chaîne actuelle. Appuyez de nouveau sur le bouton INFO ou attendez environ 10 secondes pour que l’affichage disparaisse automatiquement. CONTRÔLE DES CHAÎNES Configuration du menu des chaînes Pays L'écran de saisie du code PIN s'affiche. Entrez votre code PIN à quatre chiffres. Canal analogique Permet de changer de pays pour les chaînes analogiques. Canal numérique Permet de changer de pays pour les chaînes numériques. Mémorisation Auto Vous pouvez chercher les plages de fréquence disponibles par balayage (leur disponibilité dépend de votre pays). Il est possible que les numéros de programme attribués automatiquement ne correspondent pas aux numéros de programme souhaités ou réels. Si une chaîne est verrouillée par la fonction Verrouillage Canal, la fenêtre de saisie du code PIN s'affiche. Hertzien / Câble Source d'antenne à mémoriser Numérique et Analogique : Chaînes numériques et analogiques. Numérique : Chaînes numériques. Analogique : Chaînes analogiques. Lors de la sélection de ‘Câble → Numérique et Analogique’ ou de ‘Câble → Numérique’ Fournissez une valeur à rechercher pour les chaînes câblées. Mode Rech. → Complet / Réseau / Rapide Rapide Network ID : affiche le code d'identification du réseau. Fréquence : affiche la fréquence correspondant au canal (varie d'un pays à l'autre). Modulation : affiche les valeurs de modulation disponibles. Taux de symbole : affiche les débits de symboles disponibles. – – – – Cherche toutes les chaînes avec des stations de diffusion actives et les enregistre dans la mémoire du téléviseur. Pour arrêter la mémorisation automatique, appuyez sur le bouton ENTERE. Le message Arrêter le programme automatique ? s'affiche. Sélectionnez Oui en appuyant sur le bouton ◄ ou ►, puis appuyez sur le bouton ENTERE. ¦ O ● ● N ¦ ❑ N   ❑ N  ● ● ● ● N N N Français - 8 Pays ► Mémorisation Auto Mémorisation Manuelle Option de recherche du câble Guide Now & Next Guide Complet Par défaut : Guide Complet Canal DTV Air 15 abc1 18:00 ~ 6:00 18:11 Thu 6 Jan Life On Venus Avenue Unclassified No Detaild Information ' INFO BN68-02360A_01L09.indb 8 2009-08-31 �� 10:30:48Mémorisation Manuelle Permet de chercher manuellement une chaîne et de l'enregistrer dans la mémoire du téléviseur. Si une chaîne est verrouillée par la fonction Verrouillage Canal, la fenêtre de saisie du code PIN s'affiche. Canal numérique Enregistrement manuel de chaînes numériques. Canal numérique est uniquement disponible en mode DTV. Canal : Sélectionnez le numéro de chaîne à l'aide des boutons ▲, ▼ ou des chiffres (0~9). Fréquence : Sélectionnez la fréquence à l'aide des chiffres. Bande passante : Sélectionnez la bande passante à l'aide des boutons ▲, ▼ ou des chiffres (0~9). Au terme de la recherche, les chaînes de la liste sont mises à jour. Canal analogique Enregistrement manuel de chaînes analogiques. Programme (numéro de programme à attribuer à une chaîne) : Sélectionnez le numéro de chaîne à l'aide des boutons ▲, ▼ ou des touches numériques (0~9). Système de Couleur → Auto. / PAL / SECAM / NTSC4.43 : Sélectionnez le système de couleurs à l'aide du bouton ▲ ou ▼. Système Sonore → BG / DK / I / L: Sélectionnez le système audio à l'aide du bouton ▲ ou ▼. Canal (si vous connaissez le numéro de la chaîne à mémoriser) : Appuyez sur le bouton ▲ ou ▼ pour sélectionner C (chaîne hertzienne) ou S (chaîne câblée). Appuyez sur le bouton ►, puis sur le bouton ▲ ou ▼ ou un chiffre (0~9) pour sélectionner le numéro de votre choix. Vous pouvez également sélectionner le numéro de chaîne directement en appuyant sur les touches numériques (0~9). Si aucun son ne sort ou si le son produit est anormal, sélectionnez de nouveau la norme son requise. Recherche (lorsque vous ne connaissez pas les numéros de chaîne) : Appuyez sur le bouton ▲ ou ▼ pour lancer la recherche. Le syntoniseur balaie la plage de fréquences jusqu'à ce que vous receviez la première chaîne ou la chaîne que vous avez sélectionnée à l'écran. Enr. (permet de mémoriser la chaîne et le numéro de programme correspondant) : Sélectionnez OK en appuyant sur le bouton ENTERE. Mode des chaînes P (Mode Programme) : à la fin du réglage, des numéros de position compris entre P00 et P99 sont attribués aux stations de radiodiffusion de votre région. Dans ce mode, vous pouvez sélectionner un chaîne en saisissant son numéro de position. C (Mode chaîne hertzienne) : dans ce mode, vous pouvez sélectionner une chaîne en saisissant le numéro attribué à chacune des stations de télédiffusion. S (Mode chaîne câblée) : dans ce mode, vous pouvez sélectionner une chaîne en saisissant le numéro attribué à chacune des chaînes câblées. Option de recherche du câble (en fonction du pays) Définit des options supplémentaires telles que la fréquence et le débit de symboles pour les recherches sur réseau câblé. Fréquence (Début ~ Fin) : affiche la fréquence correspondant au canal. Modulation : affiche les valeurs de modulation disponibles. Taux de symbole : affiche les débits de symboles disponibles. Guide Now & Next / Guide Complet Les informations relatives au guide électronique des programmes (EPG) sont fournies par les diffuseurs. Des entrées de programmes peuvent être vides ou ne pas être à jour en raison des informations diffusées sur un canal donné. L'affichage est automatiquement actualisé dès que de nouvelles informations sont disponibles. Pour obtenir plus de détails sur les procédures d'utilisation du Guide Now & Next et Guide Complet, reportez-vous aux descriptions de la page 10. Vous pouvez aussi afficher le guide en appuyant simplement sur le bouton GUIDE (pour configurer Par défaut, reportez-vous aux descriptions). Guide Now & Next Pour les six canaux indiqués dans la colonne de gauche, les informations relatives au programme actuel et au programme suivant sont affichées. Guide Complet Affiche le programme heure par heure. Deux heures de programme sont affichées et vous pouvez faire défiler le programme en avançant ou en remontant dans le temps. ❑ N N  N ● ● ● N  ● ● ● ● N N ● ● N – – – ❑ ● ● ● ❑ N O   Français - 9 BN68-02360A_01L09.indb 9 2009-08-31 �� 10:30:48Français - 10 Par défaut → Guide Now & Next / Guide Complet Vous pouvez choisir d'afficher le Guide Now & Next ou le Guide Complet lorsque vous appuyez sur le bouton GUIDE de la télécommande. Liste des chaînes Pour obtenir plus de détails sur les procédures d'utilisation de la Liste des chaînes, reportez-vous aux instructions de Managing Channels. Vous pouvez sélectionner ces options en appuyant sur le bouton CH LIST de la télécommande. Mode Canal Appuyez sur le bouton P >/<. L’ordre des chaînes affichées change. Chaînes ajoutées L’ordre des chaînes change dans la liste des chaînes mémorisées. Favoris L’ordre des chaînes change dans la liste des chaînes favorites. Réglage fin Si la réception est claire, vous n'avez pas besoin d'effectuer une syntonisation fine du canal, car cette opération s'effectue automatiquement pendant la recherche et la mémorisation. Si le signal est faible ou distordu, vous pouvez être amené à effectuer manuellement une syntonisation fine du canal. Les canaux finement syntonisés qui ont été mémorisés sont repérés par un astérisque "*" placé à droite de leur numéro dans la bannière des canaux. Pour rétablir la syntonisation fine, sélectionnez Réin. à l'aide du bouton ▲ ou ▼, puis appuyez sur le bouton ENTERE. La syntonisation fine n'est possible que pour des chaînes analogiques. Utilisation du Guide Now & Next / Guide Complet Pour… Alors… Regarder un programme de la liste du guide électronique des programmes Sélectionnez un programme à l'aide des boutons ▲, ▼, ◄, ►. Quitter le guide Appuyez sur le bouton bleu. Si le programme suivant est sélectionné, il est planifié avec l'icône de l'horloge affichée. Si vous appuyez de nouveau sur le bouton ENTERE puis sur ◄, ► pour sélectionner Annuler progr., la programmation est annulée et l'icône de l'horloge disparaît. Voir les informations relatives aux programmes Sélectionnez un programme à l'aide des boutons ▲, ▼, ◄, ►. Appuyez ensuite sur le bouton INFO lorsque le programme de votre choix apparaît en surbrillance. Le titre du programme se trouve dans la partie supérieure du centre de l'écran. Cliquez sur le bouton INFO pour obtenir des informations détaillées. Numéro de canal, temps de fonctionnement du programme, barre d'état, niveau de contrôle parental, informations sur la qualité vidéo (HD/SD), modes son, sous-titres ou télétexte, langue des sous-titres ou du télétexte et bref résumé du programme en surbrillance font partie des informations détaillées. “...” s'affiche si le résumé est long. Choisissez entre Guide Now & Next et Guide complet Appuyez à plusieurs reprises sur le bouton rouge. Dans le guide complet Reculer rapidement (24 heures). Avancer rapidement (24 heures). Appuyez à plusieurs reprises sur le bouton vert. Appuyez à plusieurs reprises sur le bouton jaune. ❑ ❑ O ❑   ❑ N N N Guide Complet DTV Cable 900 f tn 2:10 Mar 1 Jui Freshmen On Campus 2:00 - 2:30 No Detailed Information Aujourd’hui 2:00 - 3:00 3:00 - 4:00 Mint Extra Loaded Fresh 40 with Dynamite MC The Distillery Smash Hits! Sunday 1 f tn 2 ITV Play 3 Kerrang! 4 Kiss 5 oneword ▼ 6 Smash Hits! Street Hypn.. Kisstory Aucune information. Aucune information. Aucune information. Freshmen O.. Regarder INFO Information ■ Main/Aprés ■ +24 Heure ■ Quitter Guide Now & Next DTV Cable 900 f tn 2:10 Mar 1 Jui Freshmen On Campus 2:00 - 2:30 No Detailed Information Maintenant Suivant Mint Extra Loaded Fresh 40 with Dynamite MC The Distillery Smash Hits! Sunday 1 f tn 2 ITV Play 3 Kerrang! 4 Kiss 5 oneword ▼ 6 Smash Hits! Street Hypn.. Kisstory Aucune information. Aucune information. Aucune information. Freshmen O.. Regarder INFO Information ■ Guide Complet ■ Quitter BN68-02360A_01L09.indb 10 2009-08-31 �� 10:30:48Français - 11 Gestion des chaînes Ce menu permet d'ajouter/supprimer ou définir des chaînes favorites et d'utiliser le guide des programmes pour les émissions numériques. Tous les canaux Affiche toutes les chaînes actuellement disponibles. Chaînes ajoutées Affiche toutes les chaînes ajoutées. Favoris Affiche toutes les chaînes favorites. Pour sélectionner les chaînes favorites que vous avez configurées, appuyez sur le bouton FAV.CH de la télécommande. Programmé Affiche tous les programmes actuellement réservés. Sélectionnez une chaîne dans l'écran Tous les canaux, Chaînes ajoutées ou Favoris en appuyant sur les boutons ▲ / ▼, puis sur le bouton ENTERE. Vous pouvez alors regarder la chaîne sélectionnée. Utilisation des boutons de couleur dans la liste des chaînes Rouge (Type de canal) : permet de basculer entre TV, Radio, Donn/autre et Tous. Vert (Zoom) : Agrandit ou réduit un numéro de chaîne. Jaune (Sélect.) : Sélectionne plusieurs listes de chaînes. Vous pouvez appliquer les fonctions d'ajout/suppression, d'ajout / suppression de favoris ou de verrouillage / déverrouillage à plusieurs chaînes à la fois. Sélectionnez les chaînes voulues, puis appuyez sur le bouton jaune pour traiter toutes les chaînes sélectionnées à la fois. La marque c s'affiche à gauche des chaînes sélectionnées. TOOLS (Outils) : affiche le menu Supprimer (ou Ajouter), Ajouter aux favoris (ou Supprimer des favoris), Verrouil. (ou Déverr.), Rappel de prog., Modif. Nom Canal, Tri des canaux, Modif. numéro chaîne, Sélectionner tout, (ou Désélec. Tout), Mémorisation Auto. (Les menus Options peuvent varier en fonction de la situation.) Icônes d'état des chaînes A : Chaîne analogique. c : Chaîne sélectionnée en appuyant sur le bouton jaune. * : Chaîne définie comme favorite. ( : Programme en cours de diffusion. \ : Chaîne verrouillée. ) : Programme réservé. Menu d'options de la liste des chaînes (dans Tous les canaux / Chaînes ajoutées / Favoris) Appuyez sur le bouton TOOLS pour utiliser le menu d'options. Les éléments du menu Options peuvent varier selon l'état de la chaîne. Ajouter / Supprimer Vous pouvez supprimer ou ajouter une chaîne afin d'afficher les chaînes de votre choix. Toutes les chaînes supprimées apparaîtront dans le menu Tous les canaux. Une chaîne grisée est une chaîne qui a été supprimée. Le menu Ajouter s'affiche uniquement pour les chaînes supprimées. Vous pouvez également ajouter une chaîne du menu Chaînes ajoutées ou Favoris de la même manière. Ajouter aux favoris / Supprimer des favoris Vous pouvez définir comme favorites les chaînes que vous regardez souvent. Appuyez sur le bouton TOOLS pour afficher le menu Outils. Vous pouvez également définir l'ajout aux (ou la suppression des) favoris en sélectionnant Outils → Ajouter aux favoris (ou Supprimer des favoris). Le symbole "*" s’affiche et la chaîne est définie comme favorite. Toutes les chaînes favorites apparaîtront dans le menu Favoris. ¦    O  N N – – – – N ● ● ● ● ● ● N N  N N N N  T N N Français - 11 824 UKTV Gold 825 UKTV style A 1 C -- A 2 C -- A 3 ♥ C -- A 4 C -- A 5 C -- A 6 C -- A 7 C -- Chaînes ajoutées Tous ■ Type de Canal ■ Zoom ■ Sélectionnez T utils 824 UKTV Gold 825 UKTV style A 1 C -- A 2 C -- A 3 ♥ C -- A 4 C -- A 5 C -- A 6 C -- A 7 C -- Chaînes ajoutées Tous ■ Type de Canal ■ Zoom ■ Sélection T Outils Supp. Ajouter aux favoris Verrouil. Rappel de prog. Modifi. nom de chaîne Tri des canaux ▼ BN68-02360A_01L09.indb 11 2009-08-31 �� 10:30:49Français - 12 Verrouil. / Déverr. Vous pouvez verrouiller une chaîne afin qu'elle ne puisse pas être sélectionnée ni visualisée. Cette fonction n'est disponible que si l'option Verr Parental est définie sur Marche (Voir page 21). L'écran de saisie du code PIN s'affiche. Entrez votre code PIN à quatre chiffres. Le code PIN par défaut d'un nouveau téléviseur est 0-0-0-0. Vous pouvez modifier le code PIN en sélectionnant Modifier PIN dans le menu. Le symbole "\" s'affiche et la chaîne est verrouillée. Rappel de prog. Si vous réservez un programme que vous souhaitez regarder, la chaîne bascule automatiquement vers la chaîne réservée dans la liste de chaînes, même si vous êtes en train de regarder une autre chaîne. Pour réserver un programme, réglez d'abord l'heure actuelle (Voir page 19). Il n'est possible de réserver que des chaînes mémorisées. Vous pouvez régler directement la chaîne, le jour, le mois, l'heure et les minutes à l'aide des touches numériques de la télécommande. Les programmes réservés apparaissent dans le menu Programme. Guide des programmes numérique et affichage des réservations Quand une chaîne numérique est sélectionnée et que vous appuyez sur le bouton ►, le Guide des programmes de la chaîne s'affiche. Vous pouvez réserver un programme en suivant les procédures décrites ci-dessus. Modifi. nom de chaîne (chaînes analogiques uniquement) Vous pouvez attribuer aux chaînes un libellé qui s'affiche chaque fois que vous les sélectionnez. Les noms des chaînes numériques leur sont automatiquement attribués ; vous ne pouvez pas les modifier. Modif. numéro chaîne (chaînes numériques uniquement) Vous pouvez également modifier le numéro de chaîne à l'aide du pavé numérique de la télécommande. Tri des canaux (chaînes analogiques uniquement) Cette opération permet de changer les numéros de programme des chaînes mémorisées. Cette opération peut s'avérer nécessaire après l'utilisation de la mémorisation automatique. Sélectionner tout / Désélectionner tout Sélectionner Tout: Vous pouvez sélectionner toutes les chaînes de la liste des chaînes. Désélec. Tout: Vous pouvez désélectionner toutes les chaînes sélectionnées. La fonction Désélec. Tout n'est disponible que si au moins une chaîne est sélectionnée. Mémorisation Auto Pour plus d'informations sur le réglage des options, reportez-vous à la page 8. Si une chaîne est verrouillée par la fonction Verr Parental, la fenêtre de saisie du code PIN s'affiche. Menu d'options de la liste des chaînes (dans Programmé) Vous pouvez voir, modifier ou supprimer une réservation. Appuyez sur le bouton TOOLS pour utiliser le menu d'options. Infos modif. Permet de modifier une réservation. Annuler progr. Permet d'annuler une réservation. Information Permet de visualiser une réservation (et d'en modifier les informations). Sélectionner tout Permet de sélectionner tous les programmes réservés.  N N N  N N N N  N    ● ● N  N N N     Français - 12 1 / 1 / 2009 13:59 5 TV1 Quincy, M.E 18:59 2 TV3 The Equalizer 20:59 2 TV3 McMillan & Wife Programmé Tous ■ Zoom ■ Sélection T Outils E Information Infos modif. Annuler progr. Information Sélectionner tout BN68-02360A_01L09.indb 12 2009-08-31 �� 10:30:49Français - 13 CONTRÔLE D'IMAGE Configuration du menu Image Mode Vous pouvez sélectionner le type d'image correspondant le mieux à vos besoins d'affichage. Appuyez sur le bouton TOOLS pour afficher le menu Outils. Vous pouvez également définir le mode d'image en sélectionnant Outils → Mde d'image. Dynamique Sélectionne l'image pour un affichage haute définition dans une pièce lumineuse. Standard Sélectionne l'image pour un affichage optimal dans un environnement normal. Cinéma Sélectionne l'image pour le visionnage de films dans une pièce sombre. Rétroéclairage / Contraste / Luminosité / Netteté / Couleur / Teinte (V/R) Votre téléviseur offre de plusieurs options de paramétrage qui permettent de contrôler la qualité d'image. Rétroéclairage : Règle la luminosité du rétroéclairage de l'écran LCD. Contraste : Règle le niveau de contraste de l'image. Luminosité : Règle le niveau de luminosité de l'image. Netteté : Règle la définition des bords de l'image. Couleur : Règle la saturation de couleur de l'image. Teinte (V/R) : Ajuste la teinte de couleur de l'image. Sélectionnez un mode d'image à ajuster. Les valeurs ajustées sont enregistrées pour tous les modes d'image. Lorsque vous modifiez les paramètres Rétroéclairage, Contraste, Luminosité, Netteté, Couleur ou Teinte (V/R), l'affichage à l'écran change en conséquence. Dans les modes analogiques TV, Ext., AV du système PAL, vous ne pouvez pas utiliser la fonction Teinte (V/R). En mode PC, vous ne pouvez modifier que les options Rétroéclairage, Contraste et Luminosité. Vous pouvez régler et Mémoriser des paramètres pour chaque périphérique externe connecté à une entrée du téléviseur. Vous pouvez réduire sensiblement l'énergie consommée en cours d'utilisation en baissant le niveau de luminosité de l'image, de façon à diminuer le coût de fonctionnement général. Paramètres avancés Les nouveaux téléviseurs Samsung permettent d'effectuer des réglages d'image encore plus précis que les modèles précédents. Le réglage des paramètres détaillés de l'image est expliqué ci-dessous. Paramètres avancés est disponible dans les modes Standard et Cinéma. En mode PC, vous ne pouvez modifier que les paramètres Gamma et Balance blancs parmi les options de menu Paramètres avancés. Nuance de noir → Arrêt / Sombre / Plus sombre / Le plus sombre Vous pouvez choisir le niveau de noir pour régler la profondeur de l'écran. Contraste Dynam. → Arrêt / Bas / Moyen / Elevé Vous pouvez régler le contraste de l'écran pour obtenir un résultat optimal. Gamma Vous pouvez régler l'intensité des couleurs primaires (rouge, vert, bleu). Espace couleur Espace couleur de Couleur est une matrice de couleurs composée de rouge, de vert et de bleu. Sélectionnez votre espace de couleur préféré et appréciez la couleur la plus naturelle. Natif : offre une nuance de couleur profonde et riche. Auto. : règle automatiquement la nuance de couleur la plus naturelle sur la base des sources de pro