et PRE-CH pour modifier le mode TV. (Remarque : le bouton de chaîne ne fonctionne que si aucun appareil Anynet+ à tuner incorporé n'est connecté.) Le message "Connexion à Anynet+..." apparaît à l'écran. • Il est impossible d'utiliser la télécommande lorsque vous configurez Anynet+ ou basculez vers un mode d'affichage. • La télécommande n'est utilisable qu'au terme de la configuration d'Anynet+ ou du passage vers un mode d'affichage. La lecture ne démarre pas sur l'appareil Anynet+. • Vous ne pouvez pas utiliser la fonction de lecture lorsque Plug & Play (configuration initiale) est en cours. Le périphérique connecté ne s'affiche pas. • Vérifiez que l'appareil est compatible avec les fonctions Anynet+. • Vérifiez que le câble HDMI est bien connecté. • Vérifiez que l'option Anynet+ (HDMI-CEC) est définie sur Activé dans le menu de configuration d'Anynet+. • Lancez une nouvelle recherche d'appareils Anynet+. • Vous pouvez uniquement connecter un appareil Anynet+ à l'aide du câble HDMI. Il se peut que certains câbles HDMI ne prennent pas en charge les fonctions Anynet+. • Si la connexion est interrompue à cause d'une coupure de courant ou parce que le câble HDMI a été déconnecté, effectuez une nouvelle recherche d'appareils. Le programme TV ne s'enregistre pas. • Vérifiez que la fiche d'antenne est correctement branchée sur l'enregistreur. Le son du téléviseur n'est pas diffusé par le récepteur. • Connectez le téléviseur au récepteur à l'aide du câble optique.Français 45 Informations supplémentaires Installation du pilote de périphérique ✎Si vous installez le pilote de périphérique, vous pourrez régler la résolution et la fréquence optimales de l'appareil. Ce pilote se trouve sur le CD-ROM fourni avec l'appareil. Si le fichier fourni est endommagé, contactez un centre de service ou consultez le site Web de Samsung Electronics (www.samsung.com), où vous pouvez télécharger le pilote. 1. Insérez le CD d'installation dans le lecteur de CD-ROM. 2. Cliquez sur « Pilote Windows ». 3. Terminez l'installation en suivant les instructions affichées à l’écran. 4. Sélectionnez le modèle de votre appareil dans la liste. 5. Vérifiez si la résolution et la fréquence de rafraîchissement appropriées sont bien affichées dans le Panneau de configuration. Pour plus d'informations sur la batterie, reportez-vous à la documentation du système d'exploitation Windows. Informations supplémentairesFrançais 46 Informations supplémentaires Fonction de télétexte Chaîne analogique La page d'index du télétexte contient des instructions sur l'utilisation du service. Pour que les informations du télétexte s'affichent correctement, la réception des chaînes doit être stable. Autrement, des informations pourraient manquer ou certaines pages ne pas s'afficher. ✎Vous pouvez changer de page de télétexte en appuyant sur les boutons numériques de la télécommande. 1 / (Télétexte activé/mix/ désactivé) : active le mode télétexte pour la chaîne choisie. Appuyez deux fois sur ce bouton pour superposer le mode Télétexte à l'émission en cours de diffusion. Appuyez sur le bouton une nouvelle fois pour quitter le système télétexte. 2 8 (mémoriser): permet de mémoriser les pages télétexte. 3 4 (taille): permet d'afficher la moitié supérieure de l'écran en caractères deux fois plus grands. Pour afficher le texte dans la moitié inférieure de l'écran, appuyez une nouvelle fois sur ce bouton. Pour rétablir l'affichage normal, appuyez dessus une fois de plus. 4 9 (stop): arrête l'affichage sur la page en cours, au cas où plusieurs pages supplémentaires suivraient automatiquement. Pour annuler, appuyez de nouveau sur cette touche. 5 Boutons de couleur (rouge, vert, jaune, bleu): si la société de radiodiffusion utilise le système FASTEXT, les différents sujets traités dans la page télétexte disposent d'un code couleur et peuvent être sélectionnés à l'aide des boutons de couleur de la télécommande. Appuyez sur la couleur correspondant au sujet de votre choix. Une nouvelle page avec code couleur est affichée. Les éléments peuvent être sélectionnés de la même manière. Pour afficher la page précédente ou la page suivante, appuyez sur le bouton de couleur correspondant. 6 0 (mode): permet de sélectionner le mode Télétexte (LIST/FLOF). Si vous appuyez sur ce bouton alors que le mode LIST est sélectionné, il passe en mode d'enregistrement de liste. Dans ce mode, vous pouvez enregistrer une page télétexte dans une liste à l'aide du bouton 8 (mémoriser). 7 1 (page secondaire): permet d'afficher une page secondaire. 8 2 (page suivante): page suivante du télétexte. 9 3 (page précédente): page précédente du télétexte. 0 6 (index): permet d'afficher la page d'index du télétexte (sommaire). ! 5 (afficher): affiche le texte masqué (les réponses à un questionnaire, par exemple). Pour rétablir le mode d'affichage normal, appuyez de nouveau sur ce bouton. @ 7 (annuler): réduit l'écran télétexte pour le superposer à l'émission en cours. Page de Télétexte type Catégorie Contenu A Numéro de la page sélectionnée. B Identité de la chaîne émettrice. C Numéro de la page actuelle ou indications de recherche. D Date et heure. E Texte. F Informations sur l'état. Informations FASTEXT. CH LIST MENU TOOLS RETURN EXIT INFO TTX/MIX A B C D 6 7 8 9 ! @ 0 1 3 2 4 5 PRE-CH SOURCEFrançais 47 Informations supplémentaires Montage d'un kit de fixation murale/support de bureau Préparation avant l'installation d'un dispositif de fixation murale/support de bureau 1. Eteignez l'appareil et débranchez le cordon d'alimentation de la prise murale. 2. Posez un chiffon doux ou un coussin sur une surface plane afin de protéger l'appareil. Posez l'appareil sur le chiffon de telle façon que sa partie avant soit tournée vers le bas. 3. Retirez la vis située à l'arrière du produit. 4. Soutenez le corps de l'appareil à l'aide d'une main comme le montre l'illustration. Tirez le pied dans le sens de la flèche, comme le montre l'illustration, afin de le détacher. Montage d'un kit de fixation murale/support de bureau 1 2 3 4 5. Alignez le support mural/de bureau avec le téléviseur/l'écran et fixez le support mural/de bureau en serrant la vis. 6. Alignez la fente de la partie de l'appareil à relier au support sur la fente du support (pied de bureau, support pour fixation murale ou autre support) et fixez solidement le support en serrant la vis. ✎REMARQUE x Si vous employez des vis plus longues que nécessaire, vous risquez d'endommager l'intérieur de l'appareil. x Pour les fixations murales non conformes aux spécifications VESA standard, la longueur des vis peut varier, selon leurs spécifications. A B A B Kit de fixation murale/support de bureau (non fourni) A Support mural/de bureau BFrançais 48 Informations supplémentaires x N'employez pas de vis non conformes aux spécifications VESA standard et ne forcez pas en les serrant. Vous risqueriez d'endommager l'appareil ou de le faire tomber et de vous blesser. Samsung décline toute responsabilité quant à d'éventuels dommages matériels ou corporels. x La société décline toute responsabilité quant à d'éventuels dommages de l'appareil ou corporels dus à l'emploi d'un pied non conforme ou résultant d'une installation réalisée par une personne qui n'est pas un installateur agréé. x Lorsque vous installez l'appareil à l'aide d'une fixation murale, optez pour une fixation qui s'écarte au moins de 10 cm (3.93 pouces)du mur. x Utilisez le support mural conformément aux standards internationaux. Assemblage des câbles Le serre-câble permet de dissimuler câbles derrière le support. ✎La couleur et l'aspect du produit peuvent varier en fonction du modèle, et ses spécifications peuvent être modifiées sans préavis pour des raisons d'amélioration des performances. Verrou antivol Kensington Le verrou antivol Kensington n'est pas fourni par Samsung. L'antivol Kensington est un dispositif utilisé pour fi xer physiquement le système lorsqu'il est utilisé dans un endroit public. L'aspect du verrou et la méthode de verrouillage peuvent différer de l'illustration en fonction du fabricant. Consultez le manuel fourni avec le verrou Kensington pour obtenir des instructions d'utilisation supplémentaires. ✎Une icône "K" est présente à l'arrière du téléviseur. Un verrou Kensington se trouve à côté de l'icône "K". Pour vérrouiller l'appareil, procédez comme suit : 1. Enroulez le câble de verrouillage Kensington autour d'un objet large et fi xe tel qu'un bureau ou une chaise. 2. Glissez le bout du câble auquel est attaché le verrou dans la boucle du câble de verrouillage Kensington. 3. Insérez le dispositif de verrouillage dans la fente Kensington de l'appareil (1). 4. Fermez le verrou. ✎Ces instructions sont d'ordre général. Pour de plus amples informations, consultez le manuel d'utilisation fourni avec le dispositif de verrouillage. ✎Le dispositif de verrouillage est vendu séparément. ✎L'emplacement du verrou Kensington peut varier en fonction du modèle. 1 Français 49 Informations supplémentaires Résolution des problèmes Si vous avez des questions sur le téléviseur, commencez par consulter la liste ci-dessous. Si aucune de ces solutions de dépannage ne s'applique à votre problème, rendez-vous sur le site "www.samsung.com", puis cliquez sur Assistance ou contactez le centre d'appels dont les coordonnées figurent sur la dernière page de ce manuel. Problèmes Solutions et explications Connexion PC Le message Mode non pris en charge est affiché. • Réglez la fréquence et la résolution de sortie de votre PC pour qu'elles correspondent aux résolutions prises en charge par le téléviseur (p. 20). PC reste affiché dans la liste Source, même si aucun ordinateur n'est connecté. • Cela est tout à fait normal ; la mention "PC" apparaît toujours dans la liste Source. La qualité de la vidéo est bonne, mais aucun son n'est émis. • Si vous utilisez une connexion HDMI, vérifiez le paramètre de sortie audio sur votre PC. Qualité de l'image Exécutez tout d'abord le Test de l'image pour vérifier que votre téléviseur affiche correctement l'image de test. (Accédez à MENU - Assistance - Diagnost. auto. - Test de l'image) (p. 34) Si l'image de test s'affiche correctement, sa qualité médiocre peut être due à la source ou au signal. La qualité de l'image affichée par le téléviseur n'est pas aussi bonne que dans le magasin. • Si vous possédez un décodeur câble/boîtier décodeur analogique, passez à un décodeur numérique. Utilisez des câbles HDMI ou Composant pour fournir une qualité d'image HD (haute définition). • Abonnés câble/satellite : essayez les chaînes HD dans la liste des canaux. • Connexion de l'antenne : essayez les chaînes HD après avoir effectué une mémorisation automatique. ✎ De nombreuses chaînes HD sont mises à niveau à partir de contenu SD (Standard Definition). • Réglez la résolution de sortie vidéo du décodeur câble/boîtier décodeur sur 1080i ou 720p. • Veillez à respecter la distance minimale recommandée entre vous et le téléviseur (distance basée sur la taille et la définition du signal). L'image est déformée : erreur macrobloc, petit bloc, points, pixelisation. • La compression de contenu vidéo peut engendrer une déformation de l'image, en particulier pour les mouvements rapides comme le sport et les films d'action. • Un niveau de signal faible ou de mauvaise qualité peut déformer l'image. Il ne s'agit pas d'un problème lié au téléviseur. • Utiliser un téléphone portable à proximité d'un téléviseur (jusqu'à 1 m environ) peut constituer une source de parasites visuels sur les téléviseurs analogiques et numériques. Couleur incorrecte ou manquante. • Si vous utilisez une connexion Composant, vérifiez que les câbles sont connectés aux prises adéquates. Des raccordements desserrés ou incorrects peuvent engendrer des problèmes au niveau de la couleur ou un écran vide. La couleur ou la luminosité est de mauvaise qualité. • Réglez les options Image dans le menu du téléviseur (sélectionnez Mode Image / Couleur / Luminosité / Netteté) (p. 26) • Réglez l'option Mode éco. dans le menu du téléviseur (accédez à MENU - Système - Solution Eco - Mode éco.) (p. 32) • Essayez de réinitialiser l'image pour en afficher les paramètres par défaut (Accédez à MENU - Image - Réinit. param. img) (p.29) Il y a une ligne pointillée sur les bords de l'écran. • Si la taille de l'image est réglée sur Adapter à écran, remplacez cette valeur par 16:9 (p. 26). • Changez la résolution du décodeur câble/boîtier décodeur. L'image est en noir et blanc. • Si vous utilisez une entrée composite AV, connectez le câble vidéo (jaune) au connecteur vert de l'entrée Composant 1 du téléviseur. Lors d'un changement de chaîne, l'image se bloque, est déformée ou s'affiche avec un léger décalage. • En cas de raccordement à un décodeur câble, essayez de réinitialiser ce dernier. Rebranchez le cordon d'alimentation secteur et patientez jusqu'au redémarrage du décodeur câble. Cette opération peut prendre jusqu'à 20 minutes. • Réglez la résolution de sortie du décodeur câble sur 1080i ou 720p. Qualité sonore Exécutez tout d'abord le Test du son pour vérifier que le système audio de votre téléviseur fonctionne correctement. (Accédez à MENU - Assistance - Diagnost. auto. - Test du son.) (p. 34) Si le système audio fonctionne correctement, le problème lié au son peut provenir de la source ou du signal. Il n'y a aucun son ou celui-ci est trop faible au volume maximum. • Vérifiez le volume de l'appareil externe connecté à votre téléviseur.Français 50 Informations supplémentaires Problèmes Solutions et explications La qualité d'image est bonne, mais aucun son n'est émis. • Réglez l'option Sélection Haut-parleur sur Haut-parleur TV dans le menu Son. (p. 30) • Si vous utilisez un appareil externe, assurez-vous que les câbles audio sont raccordés aux prises d'entrée audio appropriées du téléviseur. • Si vous utilisez un périphérique externe, vérifiez l'option de sortie audio du périphérique. (Par exemple, il se peut que vous deviez remplacer l'option audio de votre décodeur câble par HDMI si vous utilisez la connexion HDMI.) • Si vous utilisez un câble DVI-HDMI, un câble audio distinct est requis. • Si votre téléviseur est équipé d'une prise casque, assurez-vous que rien n'y est connecté. Les haut-parleurs émettent un son inhabituel. • Vérifiez les connexions des câbles. Vérifiez qu'aucun câble vidéo n'est raccordé à une entrée audio. • Pour les connexions de télédistribution (câble) ou antenne, vérifiez l'intensité du signal. Un niveau de signal faible peut provoquer une distorsion sonore. Aucune image, aucune vidéo La télévision ne s'allume pas. • Vérifiez que le cordon d'alimentation secteur est branché correctement sur la prise murale et sur le téléviseur. • Vérifiez que la prise murale est opérationnelle. • Essayez d'appuyer sur le bouton POWER du téléviseur pour vous assurer que le problème n'est pas dû à la télécommande. Si le téléviseur s'allume, reportez-vous au problème "La télécommande ne fonctionne pas" ci-après. Le téléviseur s'éteint automatiquement. • Vérifiez que la fonction Veille est définie sur Arrêt dans le menu Système (p. 31). • Si votre PC est connecté au téléviseur, vérifiez les paramètres d'alimentation de votre PC. • Vérifiez que le cordon d'alimentation secteur est branché correctement sur la prise murale et sur le téléviseur. • Lorsque vous regardez la télévision sur une connexion de télédistribution (câble) ou antenne, le téléviseur s'éteint après 10 à 15 minutes en l'absence de signal. Aucune image/vidéo n'est affichée. • Vérifiez le raccordement des câbles (retirez tous les câbles connectés au téléviseur et aux appareils externes, puis rebranchez-les). • Réglez les sorties vidéo de vos périphériques externes (décodeur câble/boîtier décodeur, DVD, Bluray, etc.) pour faire correspondre les connexions à l'entrée du téléviseur. Par exemple, si la sortie d'un disque dur externe est une sortie HDMI, elle doit être reliée à une entrée HDMI du téléviseur. • Vérifiez que les appareils connectés sont sous tension. • Veillez à sélectionner la source appropriée du téléviseur en appuyant sur le bouton SOURCE de la télécommande du téléviseur. Connexion RF (câble/antenne) Le téléviseur ne reçoit pas toutes les chaînes. • Vérifiez que le câble de l'antenne est raccordé correctement. • Essayez la fonction Plug & Play (configuration initiale) pour ajouter des chaînes disponibles à la liste. Choisissez MENU - Système - Plug & Play (Configuration initiale) et attendez que toutes les chaînes disponibles soient mémorisées (p. 15). • Vérifiez que l'antenne est positionnée correctement. L'image est déformée : erreur macrobloc, petit bloc, points, pixelisation. • La compression de contenu vidéo peut provoquer une déformation de l'image, en particulier pour les mouvements rapides comme le sport et les films d'action. • Un niveau de signal faible peut déformer l'image. Il ne s'agit pas d'un problème lié au téléviseur. Autres L'image ne s'affiche pas en mode plein écran. • Des barres noires s'affichent de chaque côté des chaînes HD lors de l'affichage de contenu SD (4:3) mis à niveau. • Des barres noires s'affichent en haut et en bas des films dont le format d'image est différent de celui de votre téléviseur. • Définissez les options de format d'image de votre appareil externe ou téléviseur sur Plein écran. La télécommande ne fonctionne pas. • Vérifiez que la polarité (+/–) des piles de la télécommande est respectée. • Nettoyez la lentille de la télécommande. • Essayez de diriger directement la télécommande vers le téléviseur à une distance de 1,5 à 1,8 m. La télécommande du décodeur câble/ boîtier décodeur ne fonctionne pas. • Programmez la télécommande du décodeur câble/boîtier décodeur de telle sorte qu'elle puisse commander le téléviseur. Consultez le mode d'emploi du décodeur câble/boîtier décodeur pour obtenir le code du téléviseur SAMSUNG. Le message "Mode non pris en charge" est affiché. • Vérifiez la résolution prise en charge du téléviseur et réglez la résolution de sortie de l'appareil externe en conséquence (p. 27). Une odeur de plastique se dégage du téléviseur. • Cette odeur est normale et s'atténuera avec le temps.Français 51 Informations supplémentaires Problèmes Solutions et explications L'option Informations de signal du téléviseur n'est pas disponible dans le menu de test du diagnostic automatique. • Cette fonction n'est disponible qu'avec des chaînes numériques avec connexion d'antenne (RF/ coaxial) (p. 35). Le téléviseur penche sur le côté. • Retirez le support de base du téléviseur et remontez-le. Le montage du support de base s'effectue difficilement. • Veillez à placer le téléviseur sur une surface plane. Si vous ne parvenez pas à retirer les vis du téléviseur, utilisez un tournevis aimanté. Le menu des chaînes est grisé (indisponible). • Le menu Canal n'est disponible que si la source TV est sélectionnée. Vos paramètres sont perdus après 30 minutes ou à chaque mise hors tension du téléviseur. • Si le téléviseur est en mode Enr. démo, les paramètres audio et vidéo sont réinitialisés toutes les 30 minutes. Remplacez le mode Enr. démo par le mode Util. domicile dans la procédure Plug & Play (configuration initiale). Appuyez sur le bouton SOURCE pour sélectionner le mode TV. Accédez ensuite à MENU → Système → Plug & Play (configuration initiale) → ENTERE (p. 15). Perte intermittente du signal audio ou vidéo. • Vérifiez le raccordement des câbles ; rebranchez-les au besoin. • Une perte de l'image ou du son peut être provoquée par l'utilisation de câbles trop rigides ou épais. Veillez à ce que les câbles soient suffisamment souples pour une utilisation à long terme. En cas d'installation du téléviseur en position murale, nous vous recommandons d'utiliser des câbles avec des connecteurs de 90 degrés. Des petites particules sont visibles lorsque vous observez de près le bord du cadre du téléviseur. • Elles font partie de la conception du produit et ne constituent pas un défaut. Le menu PIP n'est pas disponible. • La fonctionnalité PIP n'est disponible que lorsque vous utilisez une source HDMI, PC ou Composant (p. 34). Message "Scramble signal" ou "Weak Signal/No Signal". • Si vous utilisez une CARTE CAM (CI/CI+), vérifiez qu'elle est installée dans la fente de l'interface commune. • Si le problème persiste, retirez la CARTE CAM du téléviseur et réintroduisez-la dans la fente. Le téléviseur s'est rallumé 45 minutes après sa mise hors tension. • Cela est tout à fait normal. Le téléviseur exécute, en effet, la fonction de liaison radio (OTA) pour mettre à niveau le microprogramme téléchargé au cours de son utilisation. Problèmes récurrents liés à l'image/au son. • Vérifiez et modifiez le signal/la source. Il peut y avoir une réaction entre les coussinets en caoutchouc situés sur le support de base et la finition de certains meubles. • Pour éviter que cela ne se produise, utilisez des coussinets de feutre sur toute surface du téléviseur en contact direct avec un meuble. ✎Ce téléviseur est équipé d'un écran constitué de sous-pixels dont la fabrication nécessite une technologie sophistiquée. Il se peut toutefois que quelques points clairs ou sombres apparaissent à l'écran. Ils n'ont aucune incidence sur la performance du produit. ¦ Stockage et entretien ✎Si des autocollants sont appliqués sur l'écran du téléviseur, leur retrait peut laisser quelques traces. Nettoyez-les avant d'utiliser le téléviseur. Ne vaporisez pas d'eau ni d'agent nettoyant directement sur le produit. Tout liquide qui entre dans le produit peut engendrer une défaillance, un incendie ou une électrocution. Nettoyez le produit à l'aide d'un chiffon doux imprégné d'une petite quantité d'eau.Français 52 Informations supplémentaires ¦ Licence TheaterSound, SRS and the symbol are trademarks of SRS Labs, Inc. TheaterSound technology is incorporated under licence from SRS Labs, Inc. Fabriqué sous licence de Dolby Laboratories. Dolby et le symbole du double D sont des marques de Dolby Laboratories. Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product Includes software. © DTS, Inc. All Rights Reserved. DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used under license. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX video. Visit www. divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 Avis concernant les Licences libres En cas d'utilisation d'un logiciel libre, des Licences libres sont disponibles dans le menu du produit. L'avis concernant les Licences libres est uniquement disponible en anglais. ¦ WEEE Les bons gestes de mise au rebut de ce produit (Déchets d’équipements électriques et électroniques) (Applicable dans les pays de l’Union Européenne et dans d’autres pays européens pratiquant le tri sélectif) Ce symbole sur le produit, ses accessoires ou sa documentation indique que ni le produit, ni ses accessoires électroniques usagés (chargeur, casque audio, câble USB, etc.) ne peuvent être jetés avec les autres déchets ménagers. La mise au rebut incontrôlée des déchets présentant des risques environnementaux et de santé publique, veuillez séparer vos produits et accessoires usagés des autres déchets. Vous favoriserez ainsi le recyclage de la matière qui les compose dans le cadre d’un développement durable. Les particuliers sont invités à contacter le magasin leur ayant vendu le produit ou à se renseigner auprès des autorités locales pour connaître les procédures et les points de collecte de ces produits en vue de leur recyclage. Les entreprises et professionnels sont invités à contacter leurs fournisseurs et à consulter les conditions de leur contrat de vente. Ce produit et ses accessoires ne peuvent être jetés avec les autres déchets professionnels et commerciaux. Elimination des batteries de ce produit (Applicable aux pays de l’Union européenne et aux autres pays européens dans lesquels des systèmes de collecte sélective sont mis en place.) Le symbole sur la batterie, le manuel ou l’emballage indique que les batteries de ce produit ne doivent pas être éliminées en fin de vie avec les autres déchets ménagers. L’indication éventuelle des symboles chimiques Hg, Cd ou Pb signifie que la batterie contient des quantités de mercure, de cadmium ou de plomb supérieures aux niveaux de référence stipulés dans la directive CE 2006/66. Si les batteries ne sont pas correctement éliminées, ces substances peuvent porter préjudice à la santé humaine ou à l’environnement. Afin de protéger les ressources naturelles et d’encourager la réutilisation du matériel, veillez à séparer les batteries des autres types de déchets et à les recycler via votre système local de collecte gratuite des batteries.Français 53 Informations supplémentaires Caractéristiques techniques Considérations environnementales Fonctionnement Température : 10 °C à 40 °C (50 °F à 104 °F) Humidité : 10 % ~ 80 %, sans condensation Stockage Température : -20 °C à 45 °C (-4 °F à 113 °F) Humidité : 5 % ~ 95 %, sans condensation Incliner -2°~ 22° Système TV Analogique : B/G, D/K, L, I (en fonction de votre pays) Numérique : DVB-T/DVB-C Système de couleur/vidéo Analogique : PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60 Numérique : MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0 Système Sonore BG. OK NICAM. MPEGl HDMI IN Vidéo : 1080 24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i Audio : 2Ch Linear PCM 32/44.1/48 kHz, 16/20/24 bits. Nom du modèle T19A350 T20A350 T22A350 T23A350 T24A350 Taille de l'écran (diagonale) 18,5 pouces (47 cm) 20 pouces (50 cm) 21,5 pouces (54 cm) 23 pouces (58 cm) 24 pouces (61 cm) Résolution de l’affichage 1360 x 768 à 60Hz 1600 x 900 à 60Hz 1920 x 1080 à 60Hz Son (Sortie) 3W × 2 5W × 2 Dimensions (WxHxD) (Sans socle) 454,7 × 287,7 × 35,4 mm 487,8 × 306,5 × 35,6 mm 523,9 × 327,7 × 35,7 mm 555,7 × 345,6 × 31,6 mm 578,6 × 359,1 × 33,2 mm (Avec socle) 454,7 × 368,5 × 214,2 mm 487,8 × 387,3 × 214,2 mm 523,9 × 413,5 × 239,1 mm 555,7 × 431,9 × 239,2 mm 578,6 × 444,6 × 239,2 mm Poids (Sans socle) 3,1 kg 2,8 kg 3,6 kg 3,6 kg 4,2 kg (Avec socle) 3,4 kg 3,1 kg 4,2 kg 4,2 kg 4,8 kg Nom du modèle T22A550 T23A550 T24A550 T27A550 Taille de l'écran (diagonale) 21,5 pouces (54 cm) 23 pouces (58 cm) 24 pouces (61 cm) 27 pouces (68 cm) Résolution de l’affichage 1920 x 1080 à 60Hz Son (Sortie) 3W × 2 5W × 2 Dimensions (WxHxD) (Sans socle) 525,5 × 329,0 × 34,8 mm 559,1 × 348,7 × 31,2 mm 581,4 × 360,5 × 32,7 mm 648,1 × 398,9 × 31,8 mm (Avec socle) 525,5 × 414,4 × 220,6 mm 559,1 × 433,8 × 220,6 mm 581,4 × 446,1 × 220,6 mm 648,1 × 485,7 × 235,0 mm Poids (Sans socle) 3,6 kg 3,7 kg 4,3 kg 4,7 kg (Avec socle) 4,4 kg 4,4 kg 5 kg 5,6 kg ✎REMARQUE x La conception et les spécifications peuvent être modifiées sans préavis. x Pour plus d'informations sur les caractéristiques d'alimentation et de consommation électrique, reportez-vous à l'étiquette fixée au produit. x En fonction de la région, il se peut que certains modèles ne soient pas disponibles à l'achat. x En l'absence de commutateur de mise hors tension, la consommation électrique n'est nulle que quand le cordon d'alimentation est débranché. x La fonction DPM(Display Power Management) ne fonctionne pas si vous utilisez simultanément le port HDMI IN 1 (DVI) de ce produit.Français 54 Informations supplémentaires Index A Accessories 11 Alimentation électrique 4 Amplifier 29 Antenne 15 Anynet+ (HDMI-CEC) 41 B Balance G/D 29 C Caractéristiques techniques 53 Carnation 28 Composant 17 Connexion à un ordinateur 20 Connexion à un périphérique AV 16 Connexion à un système audio 19 Consignes de sécurité 4 Contraste Dyn. 28 D Description audio 29 Diagnost. auto. 34 Diaporama 39 DIGITAL AUDIO OUT 41 DivX® VOD 33 D-sub 20 Dynamique 25 E Ecouteurs 19 Egaliseur 29 Enregistrement 43 EPG (Electronic Programme Guide) 22 Espace d'installation 2 Etrier de câble 48 F Fond musical 40 Format de l'image 26 Formats vidéo 38 G Gestion chaînes 23 Guide Now & Next 22 H Haut-parleur TV 30 HDMI 41 Home cinéma 41 Horloge 30 Ht-parl ext 30 I Incrustation d'image (PIP) 34 Informations de signal 35 Installation 5 Installation du pilote de périphérique 45 L Langue 33 Lecteur USB 36 Licence 52 Liste des chaînes 23 Luminosité 26 M Magnétoscope 16 Menu Canal 24 Minuteur 31 Mise à niveau du logiciel 35 Mode éco. 32 Mode Film 28 Mode Répétition 40 Mode Veille 13 Modif. Nom 21 Modifier PIN 32 Mon contenu 36 Musique 39 N Navigation 21 Netteté 26 Nettoyage 7 Nuance Coul. 28 Nuance de noir 28 O Options d'image 28 P Paramètres avancés 27 Photos 39 Piles 14 Pivoter 40 Plug & Play 15 Progr. activ. 31 Progr. désact. 32 R Raccordement à une antenne 15 Récepteur 42 Recherche titre 40 Regarder TV 22 Réglage Automatique 27 Réglage fin 25 Résolution des problèmes 49 Résolution optimale 20 RVB uniquement 28 S Samsung MagicAngle 26 Sélection Haut-parleur 30 Sélectionner tout 24 Source 21 Sous-titres 33 Support mural 47 Symbole 3 T Télécommande 14 Témoin d'alimentation 13 TOOLS 3 Transparence menu 33 U Utilisation 7 Utilisation du menu Canal 22 V Veille 31 Vidéos 37 Volume auto 30 Volume 31 W WEEE 52© 2011 Samsung Electronics Co., Ltd. Tous droits réservés. BN46-00077G-01 Comment contacter SAMSUNG dans le monde Pour tout commentaire ou toute question concernant un produit Samsung, contactez le service client de SAMSUNG. Pays Service client Site Web ALBANIA 42 27 5755 - AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com BELGIUM 02-201-24-18 www.samsung.com/be (Dutch) www.samsung.com/be_fr (French) BOSNIA 05 133 1999 - BULGARIA 07001 33 11 www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) www.samsung.com CZECH 800 - SAMSUNG (800-726786) www.samsung.com Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8 DENMARK 70 70 19 70 www.samsung.com FINLAND 030 - 6227 515 www.samsung.com FRANCE 01 48 63 00 00 www.samsung.com GERMANY 01805 - SAMSUNG (726-7864 € 0,14/Min) www.samsung.com CYPRUS From landline : 8009 4000 www.samsung.com GREECE From landline : 80111-SAMSUNG(7267864) From landline & mobile : (+30) 210 6897691 www.samsung.com HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com ITALIA 800-SAMSUNG (726-7864) www.samsung.com KOSOVO +381 0113216899 - LUXEMBURG 261 03 710 www.samsung.com MACEDONIA 023 207 777 - MONTENEGRO 020 405 888 - NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com NORWAY 815-56 480 www.samsung.com POLAND 0 801-1SAMSUNG (172678) +48 22 607-93-33 www.samsung.com PORTUGAL 808 20-SAMSUNG (808 20 7267) www.samsung.com ROMANIA From landline : 08010-SAMSUNG (7267864) From landline & mobile : (+40) 21 206 01 10 www.samsung.com SERBIA 0700 Samsung (0700 726 7864) www.samsung.com SLOVAKIA 0800 - SAMSUNG (0800-726 786) www.samsung.com/sk SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com SWITZERLAND 0848 - SAMSUNG(7267864, CHF 0.08/min) www.samsung.com/ch www.samsung.com/ch_fr/(French) U.K 0330 SAMSUNG (7267864) www.samsung.com EIRE 0818 717100 www.samsung.com LITHUANIA 8-800-77777 www.samsung.com LATVIA 8000-7267 www.samsung.com ESTONIA 800-7267 www.samsung.com TURKEY 444 77 11 www.samsung.com RUSSIA 8-800-555-55-55 www.samsung.com GEORGIA 8-800-555-555 - ARMENIA 0-800-05-555 - AZERBAIJAN 088-55-55-555 - KAZAKHSTAN 8-10-800-500-55-500(GSM: 7799) www.samsung.com UZBEKISTAN 8-10-800-500-55-500 www.samsung.com KYRGYZSTAN 00-800-500-55-500 www.samsung.com TADJIKISTAN 8-10-800-500-55-500 www.samsung.com MONGOLIA www.samsung.com UKRAINE 0-800-502-000 www.samsung.ua www.samsung.com/ua_ru BELARUS 810-800-500-55-500 - MOLDOVA 00-800-500-55-500 - LCD TV quick start guide imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/global/register English -  Connections . Connect an HDMI Cable (Not supplied) between the HDMI IN (, 2 or 3) jack on the TV and the HDMI jack on the Cable Box/Satellite receiver (Set-Top Box). N No additional Audio connection is needed for an HDMI to HDMI connection. CABLE BOX/SATELLITE RECEIVER (SET-TOP BOX) REAR PANEL TV REAR PANEL  CONNECTINg A CABLE BOX/SATELLITE RECEIVER (SET-TOP BOX) VIA HDMI Caution ● When connecting an external device, match the colour of the connection terminal to the cable. ● The product colour and shape may vary depending on the model. ● Each Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration. ● Whenever you connect an external device to your TV, make sure that power on the unit is turned off. English - 2 CONNECTINg A CABLE BOX/SATELLITE RECEIVER (SET-TOP BOX) VIA DVI CABLE BOX/SATELLITE RECEIVER (SET-TOP BOX) REAR PANEL TV REAR PANEL  2 . Connect an HDMI Cable (Not supplied) between the HDMI IN 2 jack on the TV and the HDMI jack on the Cable Box/Satellite receiver (Set-Top Box). 2. Connect Audio Cables (Not supplied) between the DVI IN [R-AUDIO-L] jack on the TV and the Cable Box/Satellite receiver (Set-Top Box). N When using an HDMI/DVI cable(Not supplied) connection, you must use the HDMI IN2 jack. English - 3 CONNECTINg A CABLE BOX/SATELLITE RECEIVER (SET-TOP BOX) VIA COMPONENT CABLES TV REAR PANEL CABLE BOX/SATELLITE RECEIVER (SET-TOP BOX) REAR PANEL 2  . Connect a Component Cable (Not supplied) between the COMPONENT IN [Y, PB, PR ] jacks on the TV and the COMPONENT jacks on the Cable Box/Satellite receiver (Set-Top Box). 2. Connect Audio Cables (Not supplied) between the COMPONENT IN [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the Cable Box/Satellite receiver (Set-Top Box). English -  Storing Channels Automatically You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch. . Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 2. Press the ▲ or ▼ button to select “Auto Store”, then press the ENTER button. 3. Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTER button to select “Start”. Digital & Analogue: “Digital” and “Analogue” channels. Digital: “Digital” channels. Analogue: “Analogue” channels. Scans for all channels with active broadcast stations and stores them in the TV’s memory. If you want to stop Auto Store, press the ENTER button. The “Stop Auto Store?” message will be displayed. Select “Yes” by pressing the ◄ or ► button, then press the ENTER button. . Press the EXIT button to exit. If a channel is locked using the “Child Lock” function, the PIN input window appears. N N N N Troubleshooting My TV is out of order. Why? Try this. TV HD is displayed, but the visual quality is not good. • The visual quality may be degraded when the broadcasting stations convert the analog signal to digital. (Although you are watching digital broadcasting, the video source is analog.) • Check the transmitting signal of the corresponding cable TV network or broadcasting station. The picture on the TV screen is broken intermittently (a mosaic or distorted). • This may occur when the broadcast signal received by the TV is too weak or unstable. • Check the transmitting signal of the corresponding cable TV network or broadcasting station. • If you are using a publically shared antenna, check the signal by asking your apartment manager. I cannot control the TV using the remote control. • When the battery is flat. • When it is not in TV mode. • When the remote control malfunctions temporarily. • Replace the battery and then retry. • Press the TV button on the remote control to select TV mode. A strange sound is generated by the TV. • Sound may be generated by the temporary swelling and shrinking of the plastics in the TV due to temperature and humidity changes. • Temporary electronic oscillation sounds may be generated due to the characteristics of the TV • Some noise can be heard due to the characteristics of the product. Channel Auto Store ► Manual Store Full Guide Mini Guide Default Guide : Mini Guide Channel List Channel Mode : Added Ch. Child Lock : OnCountry Customer Care Center Web Site AUSTRIA 0800-SAMSUNg (726-7864) www.samsung.com/at BELgIUM 0032 (0)2 201 24 18 www.samsung.com/be CZECH REPUBLIC 844 000 844 www.samsung.com/cz Distributor pro Českou republiku: Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4 DENMARK 70 70 19 70 www.samsung.com/dk EIRE 0818 717 100 www.samsung.com/ie FINLAND 030-6227 515 www.samsung.com/fi FRANCE 3260 SAMSUNG (€ 0,15/Min) 08 25 08 65 65 (€ 0,15/Min) www.samsung.com gERMANY 01805 - SAMSUNg (726-7864) (€ 0,14/Min) www.samsung.com HUNgARY 06-80-SAMSUNg (726-7864) www.samsung.com ITALIA 800-SAMSUNg (726-7864) www.samsung.com LUXEMBURg 0035 (0)2 261 03 710 www.samsung.com/be NETHERLANDS 0900-SAMSUNG (726-7864) (€ 0,10/Min) www.samsung.com/nl NORWAY 815-56 480 www.samsung.com/no POLAND 0 801 801 881 022-607-93-33 www.samsung.com/pl PORTUgAL 80820-SAMSUNg (726-7864) www.samsung.com/pt SLOVAKIA 0800-SAMSUNg (726-7864) www.samsung.com/sk SPAIN 902 10 11 30 www.samsung.com SWEDEN 0771-400 200 www.samsung.com/se SWITZERLAND 0800-SAMSUNg (726-7864) www.samsung.com/ch U.K 0845 SAMSUNg (7267864) www.samsung.com TURKEY 444 77 11 www.samsung.com ESTONIA 800-7267 www.samsung.ee LATVIA 800-7267 www.samsung.com/lv LITHUANIA 8-800-77777 www.samsung.lt KAZAHSTAN 8-10-800-500-55-500 www.samsung.kz KYRgYZSTAN 00-800-500-55-500 - RUSSIA 8-800-555-55-55 www.samsung.ru TADJIKISTAN 8-10-800-500-55-500 - UKRAINE 8-800-502-0000 www.samsung.com UZBEKISTAN 8-10-800-500-55-500 www.samsung.uz Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. LCD TV quick start guide imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.com/global/register Pearl-WEurope iDTV-00Eng-0319.in1 1 2008-03-19 �� 9:21:46 English -  Connections ConneCting a Cable box/Satellite reCeiver (Set-top box) via HDMi Caution ● When connecting an external device, match the colour of the connection terminal to the cable. ● The product colour and shape may vary depending on the model. ● Each Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration. ● Whenever you connect an external device to your TV, make sure that power on the unit is turned off. . Connect an HDMI Cable(Not supplied) between the HDMI IN (1, 2 or 3) jack on the TV and the HDMI jack on the Cable Box/Satellite receiver (Set-Top Box). N No additional Audio connection is needed for an HDMI to HDMI connection. Cable box/Satellite reCeiver(Set-top box) rear panel tv rear panel tv SiDe panel  Pearl-WEurope iDTV-00Eng-0319.in1 1 2008-03-19 �� 9:21:47 English -  ConneCting a Cable box/Satellite reCeiver (Set-top box) via Dvi ConneCting a Cable box/Satellite reCeiver (Set-top box) via CoMponent CableS Cable box/Satellite reCeiver(Set-top box) rear panel tv rear panel   tv rear panel Cable box/Satellite reCeiver (Set-top box) rear panel   . Connect an HDMI Cable(Not supplied) between the HDMI IN  jack on the TV and the HDMI jack on the Cable Box/Satellite receiver (Set-Top Box). . Connect Audio Cables(Not supplied) between the DVI IN (HDMI ) [R-AUDIO-L] jack on the TV and the Cable Box/Satellite receiver (Set-Top Box). N When using an HDMI/DVI cable(Not supplied) connection, you must use the HDMI IN jack. . Connect a Component Cable(Not supplied) between the COMPONENT IN [Y, PB, PR ] jacks on the TV and the COMPONENT jacks on the Cable Box/Satellite receiver (Set-Top Box). . Connect Audio Cables(Not supplied) between the COMPONENT IN [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the Cable Box/Satellite receiver (Set-Top Box). Pearl-WEurope iDTV-00Eng-0319.in2 2 2008-03-19 �� 9:21:47 English -  Storing Channels Automatically You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch. . Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button. . Press the ENTER button to select "Country". . Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice. Even though you have changed the country setting in this menu, the country setting for DTV is not changed. 4. Press the ▲ or ▼ button to select "Auto Store", then press the ENTER button. 5. Press the ENTER button. The TV will begin memorizing all of the available channels. Press the ENTER button at any time to interrupt the memorization process and return to the "Channel" menu. 6. After all the available channels are stored, the "Sort" menu appears. N N N Troubleshooting My TV is out of order. Why? Try this. TV HD is displayed, but the visual quality is not good. • The visual quality may be degraded when the broadcasting stations convert the analog signal to digital. (Although you are watching digital broadcasting, the video source is analog.) • Check the transmitting signal of the corresponding cable TV network or broadcasting station. The picture on the TV screen is broken intermittently (a mosaic or distorted). • This may occur when the broadcast signal received by the TV is too weak or unstable. • Check the transmitting signal of the corresponding cable TV network or broadcasting station. • If you are using a publically shared antenna, check the signal by asking your apartment manager. I cannot control the TV using the remote control. • When the battery is flat. • When it is not in TV mode. • When the remote control malfunctions temporarily. • Replace the battery and then retry. • Press the TV button on the remote control to select TV mode. A strange sound is generated by the TV. • Sound may be generated by the temporary swelling and shrinking of the plastics in the TV due to temperature and humidity changes. • Temporary electronic oscillation sounds may be generated due to the characteristics of the TV • Some noise can be heard due to the characteristics of the product. Channel Country : United Kingdom  Auto Store  Manual Store  Channel Manager  Sort  Name  Fine Tune  LNA : Off  Move Enter Return TV Pearl-WEurope iDTV-00Eng-0319.in3 3 2008-03-19 �� 9:21:48Country Customer Care Center Web Site AUSTRIA 0800-SAMSUNG (726-7864) www.samsung.com/at BELGIUM 0032 (0)2 201 24 18 www.samsung.com/be CZECH REPUBLIC 844 000 844 www.samsung.com/cz Distributor pro Českou republiku: Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4 DenMarK 70 70 19 70 www.samsung.com/dk eire 0818 717 100 www.samsung.com/ie FinlanD 030-6227 515 www.samsung.com/fi FranCe 3260 SAMSUNG (€ 0,15/Min) 08 25 08 65 65 (€ 0,15/Min) www.samsung.com gerManY 01805 - SAMSUNG (726-7864) (€ 0,14/Min) www.samsung.com HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com italia 800-SAMSUNG (726-7864) www.samsung.com LUXEMBURG 0035 (0)2 261 03 710 www.samsung.com/be netHerlanDS 0900-SAMSUNG (726-7864) (€ 0,10/Min) www.samsung.com/nl NORWAY 815-56 480 www.samsung.com/no polanD 0 801 801 881 022-607-93-33 www.samsung.com/pl PORTUGAL 80820-SAMSUNG (726-7864) www.samsung.com/pt SlovaKia 0800-SAMSUNG (726-7864) www.samsung.com/sk Spain 902 10 11 30 www.samsung.com SWEDEN 0771-400 200 www.samsung.com/se SWITZERLAND 0800-SAMSUNG (726-7864) www.samsung.com/ch U.K 0845 SAMSUNG (7267864) www.samsung.com TURKEY 444 77 11 www.samsung.com eStonia 800-7267 www.samsung.ee latvia 800-7267 www.samsung.com/lv LITHUANIA 8-800-77777 www.samsung.lt KaZaHStan 8-10-800-500-55-500 www.samsung.kz KYrgYZStan 00-800-500-55-500 - RUSSIA 8-800-555-55-55 www.samsung.ru taDJiKiStan 8-10-800-500-55-500 - UKRAINE 8-800-502-0000 www.samsung.com UZBEKISTAN 8-10-800-500-55-500 www.samsung.uz Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Pearl-WEurope iDTV-00Eng-0319.in4 4 2008-03-19 �� 9:21:48 Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Customer Care Centre Web Site AUSTRIA 0800-SAMSUNG (726-7864) www.samsung.com/at BELGIUM 0032 (0)2 201 24 18 www.samsung.com/be CZECH REPUBLIC 844 000 844 www.samsung.com/cz Distributor pro Českou republiku: Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4 DENMARK 70 70 19 70 www.samsung.com/dk EIRE 0818 717 100 www.samsung.com/ie FINLAND 030-6227 515 www.samsung.com/fi FRANCE 3260 SAMSUNG (€ 0,15/Min) 08 25 08 65 65 (€ 0,15/Min) www.samsung.com GERMANY 01805 - SAMSUNG (726-7864) (€ 0,14/Min) www.samsung.com HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com ITALIA 800-SAMSUNG (726-7864) www.samsung.com LUXEMBURG 0035 (0)2 261 03 710 www.samsung.com/be NETHERLANDS 0900-SAMSUNG (726-7864) (€ 0,10/Min) www.samsung.com/nl NORWAY 815-56 480 www.samsung.com/no POLAND 0 801 801 881 022-607-93-33 www.samsung.com/pl PORTUGAL 80820-SAMSUNG (726-7864) www.samsung.com/pt SLOVAKIA 0800-SAMSUNG (726-7864) www.samsung.com/sk SPAIN 902 10 11 30 www.samsung.com SWEDEN 0771-400 200 www.samsung.com/se SWITZERLAND 0800-SAMSUNG (726-7864) www.samsung.com/ch U.K 0845 SAMSUNG (7267864) www.samsung.com TURKEY 444 77 11 www.samsung.com ESTONIA 800-7267 www.samsung.ee LATVIA 800-7267 www.samsung.com/lv LITHUANIA 8-800-77777 www.samsung.lt KAZAHSTAN 8-10-800-500-55-500 www.samsung.kz KYRGYZSTAN 00-800-500-55-500 - RUSSIA 8-800-555-55-55 www.samsung.ru TADJIKISTAN 8-10-800-500-55-500 - UKRAINE 8-800-502-0000 www.samsung.com UZBEKISTAN 8-10-800-500-55-500 www.samsung.uz LCD TV user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/global/register Model Serial No. BN68-01409H-01 BN68-01409H-00ENG.indb 1 2008-04-28 �� 5:18:08Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images. • • • © 2008 Samsung Electronics Co., Ltd. All rights reserved. Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. (See back cover for more informations.) BN68-01409H-00ENG.indb 2 2008-04-28 �� 5:18:09Connecting and Preparing Your TV List of Parts........................................................................2 Installing the Stand............................................................2 Installing the Wall Mount Kit ..............................................2 Viewing the Control Panel .................................................3 Viewing the Connection Panel...........................................4 Remote Control .................................................................7 Installing Batteries in the Remote Control .........................8 Switching On and Off.........................................................8 Placing Your Television in Standby Mode..........................8 Viewing the Menus ............................................................9 Using the TOOLS Button...................................................9 Plug & Play Feature...........................................................9 Channel Control Storing Channels Automatically.......................................11 Storing Channels Manually..............................................11 Viewing the EPG (Electronic Programme Guide) Information.......................................................................13 Setting the Default Guide ................................................14 Managing Channels.........................................................15 Setting the Channel Mode...............................................22 Activating the Child Lock .................................................22 Fine Tuning Analogue Channels......................................23 Checking the Digital-Signal Information ..........................23 LNA (Low Noise Amplifier)...............................................24 Picture Control Changing the Picture Standard .......................................25 Customizing the Picture Settings.....................................25 Adjusting the Detailed Settings........................................26 Configuring Picture Options.............................................27 Resetting the Picture Settings to the Factory Defaults ....28 Viewing Picture-in-Picture ...............................................29 Sound Control Changing the Sound Standard ........................................30 Selecting the Sound Mode ..............................................32 Connecting Headphones (Sold separately).....................32 Time Setting Setting the Clock .............................................................33 Setting the Sleep Timer ...................................................34 Switching the Television On and Off Automatically..........35 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Function Description Selecting a Menu Language............................................36 Setting Up Your Personal ID Number (PIN).....................36 Setting up the Parental Lock ...........................................37 Setting the Subtitle ..........................................................38 Selecting a Teletext Language ........................................39 Selecting a Preference Language ...................................39 Setting the Light Effect (depending on the model) ..........39 Melody/Entertainment/Energy Saving .............................40 Upgrading the Software...................................................41 Viewing Common Interface .............................................42 Selecting the CI (Common Interface) Menu ....................42 To Select the Source .......................................................43 To Edit the Input Source Name........................................43 PC Display Using Your TV as a Computer (PC) Display....................44 Display Modes .................................................................44 Setting up the TV with your PC .......................................45 WISELINK Using the WISELINK Function ........................................46 Using the Photo List ........................................................47 Sorting Photo List ............................................................49 Viewing a Photo or Slide Show ......................................53 Using the Music List ........................................................57 Sorting Music List ............................................................58 Playing a Music File.........................................................62 Using the Setup Menu.....................................................64 About Anynet+ What is Anynet+?.............................................................65 Connecting Anynet+ Devices...........................................65 Setting Up Anynet+ .........................................................66 Scanning and Switching between Anynet+ Devices........66 Recording ........................................................................67 Listening through a Receiver (Home theater)..................68 Troubleshooting for Anynet+ ...........................................68 Recommendations for Use Teletext Feature...............................................................69 Auto Wall-Mount Adjustment (Sold separately) ..............70 Using the Anti-Theft Kensington Lock (depending on the model)..............................................................................72 Securing the TV to the Wall.............................................73 Troubleshooting: Before Contacting Service Personnel..74 Specifications ..................................................................75 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ English - 1 English Contents Symbol Press Note One-Touch Button BN68-01409H-00ENG.indb 1 2008-04-28 �� 5:18:09English -  List of Parts Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. Remote Control & Batteries (AAA x 2) Power Cord Cover-Bottom Stand Screw (M4xL 16) Stand Cleaning Cloth • Owner’s Instructions • Warranty card • Safety Guide • Registration Cards Warranty card / Safety Guide / Registration Cards (Not available in all locations) The stand and stand screw may not be included depending on the model. ➣ ➣ Connecting and Preparing Your TV Installing the Stand 1. Connect your LCD TV and the stand. Two or more people should carry the TV. Make sure to distinguish between the front and back of the stand when assembling them. 2. Fasten two screws at position 1 and then fasten two screw at position 2. Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to one side. The stand is installed for models with the screen size of 37 inch and above. ➣ ➣ ➣ ➣ Installing the Wall Mount Kit Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own. Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock. Remove the stand and cover the bottom hole with a cap and fasten with two screws. ➣ BN68-01409H-00ENG.indb 2 2008-04-28 �� 5:18:11English -  Viewing the Control Panel 8 8 4 1 2 3 5 6 7 1 2 3 4 6 7 8 8 5 ➣ The product colour and shape may vary depending on the model. Front Panel buttons Touch each button to operate. 1 SOURCE Toggles between all the available input sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2/DVI, HDMI3). In the on-screen menu, use this button as you would use the ENTER button on the remote control. 2 MENU Press to see an on-screen menu of your TV’s features. 3 – + Press to increase or decrease the volume. In the on-screen menu, use the – + buttons as you would use the ◄ and ► buttons on the remote control. 4 C/P. Press to change channels. In the on-screen menu, use the C/P. buttons as you would use the ▼ and ▲ buttons on the remote control. 5 POWER INDICATOR Blinks and turns off when the power is on and lights up in stand-by mode. 6 (Power) Press to turn the TV on and off. 7 REMOTE CONTROL SENSOR Aim the remote control towards this spot on the TV. 8 SPEAKERS Side Panel Buttons BN68-01409H-00ENG.indb 3 2008-04-28 �� 5:18:12English - 4 Viewing the Connection Panel Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable. 1 PC IN [PC] / [AUDIO] Connect to the video and audio output jack on your PC. 2 COMPONENT IN - Connect component video cables (optional) to component connector (“PR”, “PB”, “Y”) on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD. - If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector (“PR”, “PB”, “Y”) on your set. - The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr. - Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD. 3 HDMI IN 1, HDMI IN , HDMI IN  - Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players) - No additional Audio connection is needed for an HDMI to HDMI connection. - When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack. ➣ ➣ 1 2 3 4 # @ ! 0 5 6 3 7 8 9 [TV Rear Panel] [TV Side Panel] ➣ The product colour and shape may vary depending on the model. Power Input BN68-01409H-00ENG.indb 4 2008-04-28 �� 5:18:12English -  What is HDMI? - “High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio. - The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio. The TV may not output sound and pictures may be displayed with abnormal colour when DVD players/Cable Boxes/ Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that provided the DVD player/Cable Box/Satellite receiver to confirm the HDMI version, then request a firmware update. HDMI cables that are not 1.3 may cause annoying flicker or no screen display. DVI IN(HDMI) [R-AUDIO-L] - DVI audio outputs for external devices. Supported modes for HDMI/DVI and Component. 480i 480p 576i 576p 720p 1080i 1080p HDMI/DVI 50Hz X X X O O O O HDMI/DVI 60Hz X O X X O O O Component O O O O O O O 4 ANT IN To view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial / A cable television network / A satellite network 5 SERVICE - Connector for SERVICE only. - Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your remote control. 6 COMMON INTERFACE Slot - When not inserting “CI CARD” in some channels,”Scrambled Signal” is displayed on the screen. - The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. - When the channel information configuration has finished, the message “Updating Completed” is displayed, indicating that the channel list is now updated. You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it. Insert the CI-Card in the direction marked on it. The place of the COMMON INTERFACE Slot may be different depending on its model. 7 WISELINK Connect a USB mass storage device to view photo files (JPEG) and play audio files (MP3). 8 S-VIDEO or VIDEO / R-AUDIO-L - Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder. - Connect RCA audio cables to “R-AUDIO-L” on your set and the other ends to corresponding audio out connectors on the A/V device. 9 HEADPHONES jACK Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the built-in speakers will be disabled. 0 AUDIO OUT [R-AUDIO-L] Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio in connectors on the Amplifier or DVD Home Theatre. ➣ ➣ ➣ ➣ ➣ ➣ BN68-01409H-00ENG.indb 5 2008-04-28 �� 5:18:12English - 6 ! DIGITAL AUDIO OUT (OPTICAL) - Connects a set of external headphones for private listening. When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the Optical jack on the DVD player or Cable/Satellite Box directly to an Amplifier or Home Theater, not the TV. @ EXT 1, EXT  Connector Input Output Video Audio (L/R) RGB Video + Audio (L/R) EXT 1 O O O Only TV or DTV output is available. EXT 2 O O Output you can choose. - Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players. # KENSINGTON LOCK (depending on the model) - The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. - If you want to use a locking device, contact the dealer where you purchased the TV. - The location of the Kensington Lock may be different depending on its model. ➣ BN68-01409H-00ENG.indb 6 2008-04-28 �� 5:18:13English -  Remote Control You can use the remote control up to a distance of about 23 feet from the TV. 1 Television Standby button 2 Selects the TV mode directly 3 �umber buttons for direct umber buttons for direct channel access 4 One/Two-digit channel selection 5 +: Volume increase -: Volume decrease 6 Temporary sound switch- Temporary sound switchoff 7 ��lectronic lectronic ��rogram rogram ��uide uide (���) display 8 ��se to se to ��uic uic��ly select ly select fre�uently used functions. 9 �se to see information on se to see information on the current broadcast 0 �olour buttons : olour buttons : �se these buttons in the �hannel list and WIS�LI�K, etc. @ �ress to select the optional ress to select the optional display and sound modes for sports, cinema and games. # �se these buttons in the se these buttons in the DMA, WIS�LI�K, and Anynet+. ( : This remote can be used to control recording on Samsung recorders with the Anynet+ feature) $ Available source selection Available source selection % �revious channel ^ P<: �ext channel P>: �revious channel & Displays the main on- Displays the main onscreen menu * This function enables you This function enables you to view and play photo and music files from an external device. ( �eturns to the previous eturns to the previous menu ) �ontrol the cursor in the ontrol the cursor in the menu a �xit the on-screen menu xit the on-screen menu b �se this when connecting a SAMS��� DMA (Digital Media Adapter) device through an HDMI interface and switching to DMA mode. (The DMA button is optional.) For more information on the operating procedures, refer to the user manual of the DMA. This button is available when “Anynet+(HDMI-���)" is “On” (see page 66) c �icture si icture si�e selectio e selectionn d Digital subtitle display Digital subtitle display e It display " It display "�hannel List" hannel List" on the screen. Teletext Functions 2 �xit from the teletext display 7 Teletext store 8 Teletext si�e selection 9 Teletext reveal 0 Fastext topic selection ! Alternately select Teletext, Double, or Mix. $ Teletext mode selection (LIST/FLOF) % Teletext sub page ^ P<: Teletext next page P>: Teletext previous page & Teletext index ( Teletext hold a Teletext cancel ➣ The performance of the remote control may be affected by bright light. 1_BN68-01409H-Eng.indd 7 2008-04-29 �� 3:03:41English - 8 Installing Batteries in the Remote Control 1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. 3. Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. If the remote control doesn’t work, check the following: 1. Is the TV power on? 2. Are the plus and minus ends of the batteries reversed? 3. Are the batteries drained? 4. Is there a power outage or is the power cord unplugged? 5. Is there a special fluorescent light or neon sign nearby? ➣ ➣ ➣ Switching On and Off The mains lead is attached to the rear of your set. 1. Plug the mains lead into an appropriate socket. The standby indicator lights up on your set. 2. Press the button on your set. You also can press the POWER button or the TV/DTV button on the remote control to turn the TV on. The programme that you were watching last is reselected automatically. 3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or C/P. button on your set. When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed. 4. To switch your set off, press the POWER button again. Placing Your Television in Standby Mode Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). 1. Press the POWER button on the remote control. The screen is turned off and a red standby indicator appears on your set. 2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or channel up/down ( / ) button again. Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial. ➣ ➣ ➣ ➣ ➣ ➣ BN68-01409H-00ENG.indb 8 2008-04-28 �� 5:18:13English - 9 Viewing the Menus 1. With the power on, press the MENU button. The main menu appears on the screen. The menu’s left side has icons: Picture, Sound, Channel, Setup, Input, Application. 2. Press the ▲ or ▼ button to select one of the icons. Then press the ENTER button to access the icon’s sub-menu. 3. Press the EXIT button to exit. ➣ The on-screen menus disappear from the screen after about one minute. Using the TOOLS Button You can use the TOOLS button to select your frequently used functions quickly and easily. The “TOOLS” menu changes depending on which external input mode you are viewing. 1. Press the TOOLS button. The “Tools” menu will appear. 2. Press the ▲ or ▼ button to select a menu. 3. Press the ▲/▼/◄/►/ENTER buttons to display, change, or use the selected items. For a more detailed description of each function, refer to the corresponding page. Device List: see page 66 Picture Mode: see page 25 Sound Mode: see page 30 Sleep Timer: see page 34 SRS TS XT: see page 30 Energy Saving: see page 40 Dual l ll: see page 32 PIP: see page 29 Auto Adjustment: see page 45 • • • • • • • • • Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently. 1. Press the POWER button on the remote control. The message “Les menus Langue, Enr. démo, Canaux et Heure seront définis.” is displayed. 2. Press the ENTER button, then “Sélectionnez la langue de l'OSD.” menu is automatically displayed. Press the ENTER button. 3. Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice. Mode : Standard Backlight : 7 Contrast : 95 Brightness : 45 Sharpness : 50 Colour : 50 Tint (G/R) : G50/R50 Detailed Settings Picture Tools Device List Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l ll : Mono Move Enter e Exit Plug & Play Les menus Langue, Enr. démo, Canaux et Heure seront définis. Entrer OK Plug & Play Sélectionnez la langue de l’OSD. Langue : Français ► Entrer BN68-01409H-00ENG.indb 9 2008-04-28 �� 5:18:14English - 10 4. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTER button. We recommend setting the TV to “Home Use” mode for the best picture in your home environment. “Store Demo” mode is only intended for use in retail environments. If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use” (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds. 5. Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTER button to select “Start”. Digital & Analogue: “Digital” and “Analogue” channels. Digital: “Digital” channels. Analogue: “Analogue” channels. The channel search will start and end automatically. Press the ENTER button at any time to interrupt the memorization process. After all the available channels are stored, the message “Set the Clock Mode.” is displayed. 6. Press the ENTER button to select the “Clock Mode”. Press the ▲ or ▼ button to select “Manual”, then Press the ENTER button. If you select “Auto”, The message “Enjoy your viewing” is displayed. If you have received a digital signal, the time will be set automatically. 7. Select the “Day”, “Month”, “Year”, “Hour”, or “Minute” by pressing the ◄ or ► button. Set the “Day”, “Month”, “Year”, “Hour”, or “Minute” by pressing the ▲ or ▼ button. You can also set the “Month”, “Day”, “Year”, “Hour” and “Minute” by pressing the number buttons on the remote control. 8. The message “Enjoy your viewing” is displayed. When you have finished, press the ENTER button. If you want to reset this feature... 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ENTER button again to select “Plug & Play”. 3. Enter your 4 digit PIN number. The default PIN number of a new TV set is “0-0-0-0”. If you want to change PIN number, refer to 37 page. For further details on setting up options, refer to the pages 9~10. The “Plug & Play” feature is only available in the TV mode. ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ Setup Plug & Play ► Language : English Time Change PIN Parental Lock Subtitle Teletext Language : ---- Preference Plug & Play Select ‘Home Use’ when installing this TV in your home. Store Demo Home Use Move Enter Plug & Play Auto Store is completed. Digital Channels : 45 Analogue Channels : 32 OK Enter Skip Plug & Play Auto Store in progress. Channel 69 Digital Channels: 29 Analogue Channels: 0 Stop 20% Enter Skip Plug & Play Set the Clock Mode. Clock Mode : Auto Auto Manual Move Enter Skip Plug & Play Enjoy your viewing OK Plug & Play 01 Day 01 Month 2008 Year 00 Hour 00 Minute Move Adjust Enter Skip Set current date and time Plug & Play Select the channel source to memorize. Digital & Analogue Digital Analogue Start Move Enter Skip Start Start Plug & Play The Menu Language, Store Demo, Channels, and Time will be set. 0~9 Enter PIN Return BN68-01409H-00ENG.indb 10 2008-04-28 �� 5:18:15English - 11 Channel Control Storing Channels Automatically You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Auto Store”, then press the ENTER button. 3. Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTER button to select “Start”. Digital & Analogue: “Digital” and “Analogue” channels. Digital: “Digital” channels. Analogue: “Analogue” channels. Scans for all channels with active broadcast stations and stores them in the TV’s memory. If you want to stop Auto Store, press the ENTER button. The “Stop Auto Store?” message will be displayed. Select “Yes” by pressing the ◄ or ► button, then press the ENTER button. 4. Press the EXIT button to exit. If a channel is locked using the “Child Lock” function, the PIN input window appears (refer to page 22). Storing Channels Manually You can store television channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Manual Store”, then press the ENTER button. Digital Channel 3. Press the ▲ or ▼ button to select “Digital Channel”, then press the ENTER button. If a channel is locked using the “Child Lock” function, the PIN input window appears (refer to page 22). 4. Press the ◄ or ► button to select the required option. − Channel : Set the Channel number using the ▲, ▼ or number buttons. − Frequency : Set the frequency using the number buttons. − Bandwidth : Set the bandwidth using the ▲, ▼ or number buttons. 5. Press the ENTER button to start the scan for digital services. When it has finished, channels are updated in the channel list. 6. When it has finished, the number of scanned services will be displayed. 7. Press the EXIT button to exit. ➣ ➣ ➣ ➣ • • ➣ ➣ Channel Auto Store ► Manual Store Full Guide Mini Guide Default Guide : Mini Guide Channel List Channel Mode : Added Ch. Child Lock : On Channel Auto Store Manual Store ► Full Guide Mini Guide Default Guide : Mini Guide Channel List Channel Mode : Added Ch. Child Lock : On Fine Tune Channel Auto Store Manual Store ► Full Guide Mini Guide Default Guide : Mini Guide Channel List Channel Mode : Added Ch. Child Lock : On Fine Tune Digital Channel Analogue Channel Manual Store Move Adjust Search Return 31 Channel 554000 KHz Frequency 8MHz Bandwidth BN68-01409H-00ENG.indb 11 2008-04-28 �� 5:18:15English - 1 Analogue Channel 3. Press the ▲ or ▼ button to select “Analogue Channel”, then press the ENTER button. If a channel is locked using the “Child Lock” function, the PIN input window appears (refer to page 22). 4. Press the ◄ or ► button to select the required item below. Press the ▲ or ▼ button to adjust to the setting satisfied. 5. Press the EXIT button to exit. Programme (Programme number to be assigned to a channel) Press the ▲ or ▼ button until you find the correct number. You can also select the channel number directly by pressing the numeric buttons (0~9). Colour System: Auto/PAL/SECAM/NTSC4.4 Press the ▲ or ▼ button to select the required colour standard. Sound System: BG/DK/I/L Press the ▲ or ▼ button to select the required sound standard. Channel (When you know the number of the channel to be stored) Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel). Press the ► button, then press the ▲ or ▼ button to select the required number. You can also select the channel number directly by pressing the numeric buttons (0~9). If there is abnormal sound or no sound, reselect the sound standard required. Search (When you do not know the channel numbers) Press the ▲ or ▼ button to start the search. The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen. Store (When you store the channel and associated programme number) Set to OK by pressing the ENTER button. Channel mode - P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode. - C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode. - S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode. ➣  ➣    ➣ ➣   ➣ Channel Auto Store Manual Store ► Full Guide Mini Guide Default Guide : Mini Guide Channel List Channel Mode : Added Ch. Child Lock : On Fine Tune Digital Channel Analogue Channel Manual Store 1 Programme Auto Colour System BG Sound System Move Adjust Return C -- Channel 62 MHz Search ? Store BN68-01409H-00ENG.indb 12 2008-04-28 �� 5:18:15English - 1 Viewing the EPG (Electronic Programme Guide) Information The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available. 1. Press the MENU button to display the menu. 2. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 3. Press the ▲ or ▼ button to select “Full Guide” or “Mini Guide” then press the ENTER button. Mini Guide The information of each program is displayed by each line on the current channel Mini Guide screen from the current program onwards according to the program starting time order. Full Guide Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which may be scrolled forwards or backwards in time. To... Then... Watch a programme in the EPG list Select a programme by pressing the ▲, ▼, ◄, ► button. Exit the guide Press the blue button If the next program is selected, it is scheduled with the clock icon displayed. If the ENTER button is pressed again, press the ◄, ► button to select Cancel Schedules, the scheduling is canceled with the clock icon gone. For details about scheduling programmes, refer to the next page. ➣ View programme information Select a programme of your choice by pressing the ▲, ▼, ◄, ► button. Then press the INFO button when the programme of your choice is highlighted. The programme title is on the upper part of the screen center. • • • Please click on INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality Information (HD/SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted programme are included on the detailed information. “...” will be appeared if the summary is long. ➣ Toggle between the “Mini Guide” or “Full Guide” Press the red button repeatedly. In Full Guide Scrolls backwards quickly (24 hours). Scrolls forwards quickly (24 hours). • • Press the green button repeatedly. Press the yellow button repeatedly. • • In Mini Guide Display next page quickly. Display previous page quickly. • • Press the green button. Press the yellow button. • • You can also display the guide menu simply by pressing the GUIDE button. (To configure the “Default Guide”, refer to the descriptions on page 14.)   O Channel Auto Store Manual Store Full Guide Mini Guide Default Guide : Mini Guide Channel List Channel Mode : Added Ch. Child Lock : On Fine Tune Signal Information Channel Manual Store Full Guide Mini Guide Default Guide : Mini Guide Channel List Channel Mode : Added Ch. Child Lock : On Fine Tune Signal Information LNA : Off Full Guide DTV Cable 900 f tn 2:10 Tue 1 Jun Freshmen On Campus 2:00 - 2:30 No Detailed Information Today 2:00 - 3:00 3:00 - 4:00 Mint Extra Loaded Fresh 40 with Dynamite MC The Distillery Smash Hits! Sunday 900 f tn 901 ITV Play 902 Kerrang! 903 Kiss 903 oneword ▼ 903 Smash Hits! Street Hypn.. Kisstory No Information No Information No Information Freshmen O.. Watch Information  Mini Guide  +24 Hours  Exit Mini Guide DTV Cable 900 f tn Street Hypnosis Booze Britain 2:00 2:30 ▼ 5:00 Freshmen On Campus Watch Information  Full Guide  Next Page  Exit BN68-01409H-00ENG.indb 13 2008-04-28 �� 5:18:16English - 14 Setting the Default Guide You can decide whether to display either the “Mini Guide” or the “Full Guide” when the GUIDE button on the remote control is pressed. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Default Guide”, then press the ENTER button. 3. Select “Mini Guide” or “Full Guide” using the ▲ or ▼ button, and press the ENTER button. 4. Press the EXIT button to exit. You can select these options by simply pressing the GUIDE button on the remote control. O Channel Full Guide Mini Guide Default Guide : Mini Guide ► Channel List Channel Mode : Added Ch. Child Lock : On Fine Tune Signal Information LNA : Off Channel Full Guide Mini Guide Default Guide : Mini Guide ► Channel List Channel Mode : Added Ch. Child Lock : On Fine Tune Signal Information LNA : Off Mini Guide Full Guide BN68-01409H-00ENG.indb 14 2008-04-28 �� 5:18:16English - 1 Managing Channels Using this menu, you can Add/Delete or set Favourite channels and use the program guide for digital broadcasts. Viewing All Channels Show all currently available channels. To use the Channel List function, operate the “Auto Store” first. 1. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button. 2. Press the ◄ button to select “Added Ch.”. 3. Press the ▲ or ▼ button to select “All Channels”. Shows all currently available channels. Press the ENTER button. 4. Press the ▲ or ▼ button to select a channel to view, then press the ENTER button. You can watch the selected channel. Press the CH LIST button on the remote control to bring up the channel lists. Using the Colour buttons on the Remote with the Channel List Red (Channel Type): Toggle between your “TV”, “Radio”, “Data/Other” and “All”. Green (Zoom): Enlarges or shrinks a channel number. Yellow (Select): Selects multiple channel lists. TOOLS (Option): Displays the “Delete”(or “Add”), “Add to Favourite”(or “Delete from Favourite”), “Lock”, “Timer Viewing”, “Edit Channel Name”, “Sort”, “Edit Channel Number”, “Select All”, “Deselect All” or “Auto Store” menu. (The Options menus may differ depending on the situation.) • • • • A gray-coloured channel indicates the channel has been deleted. The “Add” menu only appears for deleted channels. A channel marked with the “♥” mark means the channel has been set as a Favourite. The “Delete from Favourite” menu only appears for channels with the “♥” mark. ➣ O ➣ ➣ 824 UKTV Gold 825 UKTV style A 1 C -- A 2 C -- A 3 ♥ C -- A 4 C -- A 5 C -- A 6 C -- A 7 C -- A 8 C -- All Channels All  Channel Type  Zoom  Select Option Channel Mini Guide Default Guide : Mini Guide Channel List Channel Mode : Added Ch. Child Lock : On Fine Tune Signal Information LNA : Off 824 UKTV Gold 825 UKTV style A 1 C -- A 2 C -- A 3 ♥ C -- A 4 C -- A 5 C -- A 6 C -- A 7 C -- A 8 C -- Added Ch. All  Channel Type  Zoom  Select Option BN68-01409H-00ENG.indb 15 2008-04-28 �� 5:18:17English - 16 Erasing and Adding Channels You can delete or add a channel to display the channels you want. 1. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button. 2. Press the ◄ button to select “Added Ch.”. 3. Press the ▲ or ▼ button to select “All Channels”. Shows all currently available channels. Press the ENTER button. 4. Press the ▲ or ▼ button to select a channel to delete, then press the TOOLS button. 5. Press the ENTER button to select “Delete”. All deleted channels will be shown on “All Channels” menu. 6. Press the EXIT button to exit. You can also add a channel to the “Added Ch.” menu in the same manner. A channel must be deleted before it can be added back to the “Added Ch.” list. To Add (Restore) a channel back to the Added Channel List, follow steps 1-3 above, press the ▲ or ▼ button to select a channel to add, the press the TOOLS button. Press the ENTER button to select Add. Press the CH LIST button on the remote control to bring up the channel lists. ➣ ➣ ➣ ➣ ➣ O Setting Your Favourite Ch. You can set channels you watch frequently as favorites. 1. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button. 2. Press the ◄ button to select “Added Ch.”. 3. Press the ▲ or ▼ button to select “All Channels”. Shows all currently available channels. Press the ENTER button. 4. Press the ▲ or ▼ button to select a channel as a favorite channel. Adding multiple channels to Favourites Press the ▲ or ▼ button to select the desired channel in the channel list. Then press the yellow button. Repeat the above operation to select multiple channels. The mark appears to the left of the selected channels. 5. Press the TOOLS button. 6. Press the ▲ or ▼ button to select “Add to Favourite”, then press the ENTER button. The “♥” symbol will be displayed and the channel will be set as a favorite. 7. To cancel your favorite channel selection, press the TOOLS button when a favorite channel is selected. Press the ▲ or ▼ button to select “Delete from Favourite”, then press the ENTER button. The channel is deleted from “Favourites” and the “♥” mark also disappears. Press the EXIT button to exit. You can also Add or Delete a channel from Favourites in the “Added Ch.” menu in the same manner. All favorite channels will be shown on “Favourite” menu. Press the CH LIST button on the remote control to bring up the channel lists. ➣ ➣ ➣ ➣ O Channel Mini Guide Default Guide : Mini Guide Channel List Channel Mode : Added Ch. Child Lock : On Fine Tune Signal Information LNA : Off Channel Mini Guide Default Guide : Mini Guide Channel List Channel Mode : Added Ch. Child Lock : On Fine Tune Signal Information LNA : Off 824 UKTV Gold 825 UKTV style A 1 C -- A 2 C -- A 3 C -- A 4 C -- A 5 C -- A 6 C -- A 7 C -- A 8 C -- All Channels All  Channel Type  Zoom  Select Option Delete Add to Favourite Lock Timer Viewing Edit Channel Name Sort ▼ 824 UKTV Gold 825 UKTV style A 1 C -- A 2 C -- A 3 ♥ C -- A 4 C -- A 5 C -- A 6 C -- A 7 C -- A 8 C -- All Channels All  Channel Type  Zoom  Select Option Delete Add to Favourite Lock Timer Viewing Edit Channel Name Sort ▼ BN68-01409H-00ENG.indb 16 2008-04-28 �� 5:18:17English - 1 Locking and Unlocking Channels This function is available only when the “Child Lock” is set to “on”. (see page22) 1. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button. 2. Press the ◄ button to select “Added Ch.”. 3. Press the ▲ or ▼ button to select “All Channels”. Shows all currently available channels. Press the ENTER button. Locking channels 4. Press the ▲ or ▼ button to select the channels you want to lock, then press the TOOLS button. 5. Press the ▲ or ▼ button to select “Lock”, then press the ENTER button. 6. Enter your 4 digit PIN number. The “ ” symbol will be displayed and the channel will be locked. The default PIN number of a new TV set is “0-0-0-0”. If you want to change PIN number, refer to 36 page. Unlocking channels 7. Press the ▲ or ▼ button to select the channels you want to Unlock, then press the TOOLS button. 8. Press the ▲ or ▼ button to select “Unlock”, then press the ENTER button. 9. Enter your 4 digit PIN number. The channel is unlocked and the “ ” mark also disappears. The default PIN number of a new TV set is “0-0-0-0”. If you want to change PIN number, refer to 36 page. 10. Press the EXIT button to exit. ➣ ➣ ➣ ➣ ➣ ➣ ➣ Channel Mini Guide Default Guide : Mini Guide Channel List Channel Mode : Added Ch. Child Lock : On Fine Tune Signal Information LNA : Off 824 UKTV Gold 825 UKTV style A 1 C -- A 2 C -- A 3 C -- A 4 C -- A 5 C -- A 6 C -- A 7 C -- A 8 C -- All Channels All  Channel Type  Zoom  Select Option Delete Add to Favourite Lock Timer Viewing Edit Channel Name Sort ▼ 824 UKTV Gold 825 UKTV style A 1 C -- A 2 C -- A 3 C -- A 4 C -- A 5 C -- A 6 C -- A 7 C -- A 8 C -- All Channels All  Channel Type  Zoom  Select Option Delete Add to Favourite Unlock Timer Viewing Edit Channel Name Sort ▼ BN68-01409H-00ENG.indb 17 2008-04-28 �� 5:18:18English - 18 Reserving a Program (Timer Viewing) If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel. To reserve a program, set the current time first. See pages 33~34. 1. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button. 2. Press the ▲ or ▼ button to select a channel, then press the TOOLS button. 3. Press the ▲ or ▼ button to select “Timer Viewing”, then press the ENTER button. The Reserve a Program (Timer Viewing) screen appears. 4. Press the ▲/▼/◄/► buttons to reserve a program and then press the ENTER button. Reserving a program has been completed. Press the EXIT button to exit. You can also reserve a program in the “All Channels” or “Favourite” menus using the same procedures. For information on how to confirm a viewing reservation, refer to page 19. Only memorized channels can be reserved. You can set the channel, month, day, year, hour and minute directly by pressing the number buttons on the remote control. Press the CH LIST button on the remote control to bring up the channel lists. Digital Program Guide and Viewing Reservation When a digital channel is selected, and you press the ► button, the Program Guide for the channel appears. You can reserve a program according to the procedures described above. : A program currently being broadcast. : A reserved program ➣ ➣ ➣ O Timer Viewing DTV Antenna 800 Channel Once 01 - 01 - 008 Date Move Adjust Enter Return 10:00 Start Time Repeat Channel Mini Guide Default Guide : Mini Guide Channel List Channel Mode : Added Ch. Child Lock : On Fine Tune Signal Information LNA : Off 1/1/2008 1:59 LA ROSE DES .... 2:59 WS MUSIC 3:21 Gralness de stars 824 825 908 A 2 C -- A 3 ♥C -- A 4 C -- A 5 C -- A 6 C -- A 7 C -- A 8 C -- All  Channel Type  Zoom Option Watch Added Ch. All  Channel Type  Zoom  Select Option 824 UKTV Gold 825 UKTV style A 1 C -- A 2 C -- A 3 ♥ C -- A 4 C -- A 5 C -- A 6 C -- A 7 C -- A 8 C -- Added Ch. Delete Add to Favourite Lock Timer Viewing Edit Channel Name Sort ▼ BN68-01409H-00ENG.indb 18 2008-04-28 �� 5:18:18English - 19 Confirming a Viewing Reservation You can view, modify or delete a reservation. 1. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button. 2. Press the ◄ button to select “Added Ch.”. 3. Press the ▲ or ▼ button to select “Programmed”. Shows all current reserved programs. Press the ENTER button. Modifying a viewing reservation 4. To select a reservation item to be modified, press the ▲ or ▼ button and then press the TOOLS button. 5. Press the ENTER button to select “Change Info”. 6. Press the ▲/▼/◄/► buttons to change a reservation setting and then press the ENTER button. The reservation modification is applied. Canceling a reservation 4. To select a reservation item to be canceled, press the ▲ or ▼ button, and then press the TOOLS button. 5. Press the ▲ or ▼ button to select “Cancel Schedules”, then press the ENTER button. 6. Press the ◄ or ► button to select “OK”, then press the ENTER button. The viewing reservation has been canceled. Press the EXIT button to exit. Programmed Option Change Info: Select to change a viewing reservation. Cancel Schedules: Select to cancel a viewing reservation. Information: Select to view a viewing reservation. Select All: Select all reserved programs. • • • • Press the CH LIST button on the remote control to bring up the channel lists. ➣ O Programmed 1/1/2008 13:59 5 TV1 Quincy, M.E 18:59 2 TV3 The Equalizer 20:59 2 TV3 McMillan & Wife 21:59 2 TV3 M.Spillane’s mike Hammer All  Channel Type  Zoom  Select Option Information Channel Mini Guide Default Guide : Mini Guide Channel List Channel Mode : Added Ch. Child Lock : On Fine Tune Signal Information LNA : Off Programmed 1/1/2008 13:59 5 TV1 Quincy, M.E 18:59 2 TV3 The Equalizer 20:59 2 TV3 McMillan & Wife 21:59 2 TV3 M.Spillane’s mike Hammer Change Info Cancel Schedules Information Select All All  Channel Type  Zoom  Select Option Information BN68-01409H-00ENG.indb 19 2008-04-28 �� 5:18:19English - 0 Edit Channel Name-Analogue Channels can labeled so that their call letters appear whenever the channel is selected. 1. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button. 2. Press the ▲ or ▼ button to select the channel to be assigned a new name, then press the TOOLS button. 3. Press the ▲ or ▼ button to select “Edit Channel Name”, then press the ENTER button. 4. Press the ▲/▼/◄/► button to select a letter, then press the ENTER button. Numeric buttons: You can enter numbers. Red button: You can switch between English and Characters. Green button: You can delete an already entered character. Yellow button: You can enter a blank space. Blue button: You can finish renaming a channel. • • • • • 5. When you have finished, press the blue button to assign the new name. Press the EXIT button to exit. The names of digital broadcasting channels are automatically assigned and cannot be labelled. ➣ Sorting the Stored Channels-Analogue This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store. 1. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button. 2. Press the ▲ or ▼ button to select a channel, then press the TOOLS button. 3. Press the ▲ or ▼ button to select “Sort”, then press the ENTER button. 4. Press the ▲ or ▼ button to move to the position in which you would like to change and then press the ENTER button. 5. Repeat steps 2 to 4 for another channel to be sorted. 6. Press the EXIT button to exit. Channel Mini Guide Default Guide : Mini Guide Channel List Channel Mode : Added Ch. Child Lock : On Fine Tune Signal Information LNA : Off Sort 802 abc1 803 BBC Radio 1 804 BBC Radio 2 805 BBC Radio 3 806 BBC Radio 4 807 BBC World ▼ Move Enter Return Channel Mini Guide Default Guide : Mini Guide Channel List Channel Mode : Added Ch. Child Lock : On Fine Tune Signal Information LNA : Off 803 _ Number Character Delete Blank Done 0~9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Move Enter Return Edit Channel Name 0~9     All  Channel Type  Zoom  Select Option 824 UKTV Gold 825 UKTV style A 1 C -- A 2 C -- A 3 ♥ C -- A 4 C -- A 5 C -- A 6 C -- A 7 C -- A 8 C -- Added Ch. Delete Add to Favourite Lock Timer Viewing Edit Channel Name Sort ▼ All  Channel Type  Zoom  Select Option 824 UKTV Gold 825 UKTV style A 1 C -- A 2 C -- A 3 ♥ C -- A 4 C -- A 5 C -- A 6 C -- A 7 C -- A 8 C -- Added Ch. ▲ Add to Favourite Lock Timer Viewing Edit Channel Name Sort Select All ▼ BN68-01409H-00ENG.indb 20 2008-04-28 �� 5:18:20English - 1 Editing the Channel Number-Digital 1. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button. 2. Select the channel number that you wish to edit by pressing the ▲ or ▼ button repeatedly, then press the TOOLS button. 3. Press the ▲ or ▼ button to select “Edit Channel Number”, then press the ENTER button. 4. Then you can edit the Channel Number pressing the ▲ or ▼ button repeatedly. You can also edit the channel number by pressing the number buttons on the remote control. Selecting and Deselecting All Channels 1. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button. 2. Press the ▲ or ▼ button to select the channel, then press the TOOLS button. 3. Press the ▲ or ▼ button to select “Select All” or “Deselect All”, then press the ENTER button. You can select(or Deselect) all channel in the channel list. The mark appears to the left of the selected channels. Storing Channels in Memory (Auto Store) 1. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button. 2. Press the ▲ or ▼ button to select the channel to be assigned a new name, then press the TOOLS button. 3. Press the ▲ or ▼ button to select “Auto Store”, then press the ENTER button. For further details on setting up options, refer to page 11. If a channel is locked using the “Child Lock” function, the PIN input window appears (refer to page 22). ➣ ➣ ➣ ➣ Edit Channel Number Move Enter Return Channel 803 Name BBC Radio 1 All  Channel Type  Zoom  Select Option 824 UKTV Gold 825 UKTV style A 1 C -- A 2 C -- A 3 ♥ C -- A 4 C -- A 5 C -- A 6 C -- A 7 C -- A 8 C -- Added Ch. ▲ Lock Timer Viewing Edit Channel Name Sort Select All Auto Store All  Channel Type  Zoom  Select Option 824 Television X 825 UKTV style 8 UKTV style A 2 C -- A 3 ♥ C -- A 4 C -- A 5 C -- A 6 C -- A 7 C -- A 8 C -- Added Ch. Delete Add to Favourite Lock Timer Viewing Edit Channel Number Select All ▼ All  Channel Type  Zoom  Select Option 824 UKTV Gold 825 UKTV style A 1 C -- A 2 C -- A 3 ♥ C -- A 4 C -- A 5 C -- A 6 C -- A 7 C -- A 8 C -- Added Ch. Delete Add to Favourite Lock Deselect All Select All Auto Store BN68-01409H-00ENG.indb 21 2008-04-28 �� 5:18:20English -  Activating the Child Lock This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Child Lock”. Press the ENTER button. 3. Enter your 4 digit PIN number. The default PIN number of a new TV set is “0-0-0-0”. If you want to change PIN number, refer to 36 page. 4. Press the ▲ or ▼ button to select “On”. Press the ENTER button. 5. Press the EXIT button to exit. You can lock some channels in Channel List. (refer to page 17) “Child Lock” is available only in TV mode. “Child Lock” is not available when PIP is set to on. If a channel is locked using the “Child Lock” function, the PIN input window appears when “Auto Store” or “Plug & Play” is selected. ➣ ➣ ➣ ➣ ➣ ➣ Setting the Channel Mode You can display either the added channels list or the favorite channels list when the CH LIST button on the remote control is pressed. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Channel Mode”, then press the ENTER button. 3. Press the ▲ or ▼ button to select “Added Ch.” or “Favourite Ch.” . Press the ENTER button. 4. Press the EXIT button to exit. Channel Channel List Channel Mode : Added Channel Child Lock : On ► Fine Tune Signal Information LNA : Off Channel Default Guide : Mini Guide Channel List Channel Mode : Added Ch. ► Child Lock : On Fine Tune Signal Information LNA : Off Channel Default Guide : Mini Guide Channel List Channel Mode : Favourite Channels► Child Lock : Off Fine Tune Signal Information LNA : Off Added Ch. Favourite Ch. Channel Channel List Channel Mode : Added Channel Child Lock : Off ► Fine Tune Signal Information LNA : Off On Off Child Lock * * Enter PIN * 0~9 Enter PIN Return BN68-01409H-00ENG.indb 22 2008-04-28 �� 5:18:21English -  Fine Tuning Analogue Channels 1. Use the number buttons to directly select the channel that you want to fine tune. 2. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 3. Press the ▲ or ▼ button to select “Fine Tune”, then press the ENTER button. 4. Press the ◄ or ► button to adjust the fine tuning. Press the ENTER button. 5. Press the EXIT button to exit. Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner. To reset the fine-tuning, select “Reset” by pressing the ▲ or ▼ button and then press the ENTER button. Only Analogue TV channels can be fine tuned. ➣ ➣ ➣ Checking the Digital-Signal Information You can get information about the signal status. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Signal Information”, then press the ENTER button. 3. Press the EXIT button to exit. If the signal status is poor, the “No signal.” message is displayed. While viewing a Digital channel, this function can be selected. ➣ ➣ Channel Channel Mode : Added Ch. Child Lock : On Fine Tune ► Signal Information LNA : Off Channel Child Lock : On Fine Tune Signal Information ► LNA : Off Signal Information Service ID : 0401 Multiplex : (TSID 0004, ONID 20fa) Network : (ID 20fa) Bit error level 0 Signal Strength 88 Enter Return OK Fine Tune ATV 6 * Fine Tuned Reset Move Adjust Save Return + 3 BN68-01409H-00ENG.indb 23 2008-04-28 �� 5:18:21English - 4 LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “LNA”, then press the ENTER button. 3. Press the ▲ or ▼ button to select “Off” or “On”. Press the ENTER button. 4. Press the EXIT button to exit. ➣ While viewing an Analogue channel, this function can be selected. Channel Fine Tune Signal Information LNA : OnOff ► On Channel Fine Tune Signal Information LNA : Off ► BN68-01409H-00ENG.indb 24 2008-04-28 �� 5:18:21English -  Picture Control Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. 1. Press the MENU button to display the menu. Press the ENTER button to select “Picture”. 2. Press the ENTER button to select “Mode”. Press the ▲ or ▼ button to select “Dynamic”, “Standard” or “Movie”. Press the ENTER button. Dynamic: Selects the picture for high-definition in a bright room. Standard: Selects the picture for the optimum display in a normal environment. Movie: Selects the picture for viewing movies in a dark room. • • • 3. Press the EXIT button to exit. Easy Setting 1. Press the TOOLS button on the remote control. 2. Press the ▲ or ▼ button to select “Picture Mode”. 3. Press the ◄ or ► button to select the required option. 4. Press the EXIT or TOOLS button to exit. Customizing the Picture Settings Your television has several setting options that allow you to control the picture quality. 1. To select the desired picture mode, follow the “Changing the Picture Standard” instructions numbers 1 and 2. 2. Press the ▲ or ▼ button to select “Backlight”, “Contrast”, “Brightness”, “Sharpness”, “Colour” or “Tint(G/R)”, then press the ENTER button. 3. Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER button. Press the EXIT button to exit. When you make changes to “Backlight”, “Contrast”, “Brightness”, “Sharpness”, “Colour” or “Tint(G/R)”, the OSD will be adjusted accordingly. In TV, Ext., AV, S-Video modes of the PAL system, you cannot use the “Tint” Function. In PC mode, you can only make changes to “Backlight”, “Contrast” and “Brightness”. Settings can be adjusted and stored for each external device you have connected to an input of the TV. The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and that this will reduce the overall running cost. Backlight: Adjusts the brightness of LCD back light. Contrast: Adjusts the contrast level of the picture. Brightness: Adjusts the brightness level of the picture. Sharpness: Adjusts the edge definition of the picture. Colour: Adjusts colour saturation of the picture. Tint(G/R): Adjusts the colour tint of the picture. • • • • • • ➣ ➣ ➣ ➣ ➣ Picture Mode : Dynamic ► Backlight : 7 Contrast : 95 Brightness : 45 Sharpness : 50 Colour : 50 Tint (G/R) : G50/R50 Detailed Settings Dynamic Standard Movie Mode : Standard Backlight :  ► Contrast : 95 Brightness : 45 Sharpness : 50 Colour : 50 Tint (G/R) : G50/R50 Detailed Settings Picture Options Picture Backlight 7 Move Adjust Enter Return Mode : Standard Backlight : 7 Contrast : 95 Brightness : 45 Sharpness : 50 Colour : 50 Tint (G/R) : G50/R50 Detailed Settings Picture TOOLS Device List Picture Mode ◄ Standard ► Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l ll : Mono Move Adjust e Exit BN68-01409H-00ENG.indb 25 2008-04-28 �� 5:18:22English - 6 Adjusting the Detailed Settings Samsung’s new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed picture settings. Activating Detailed Settings 1. Press the MENU button to display the menu. Press the ENTER button to select “Picture”. 2. Press the ENTER button to select “Mode”. Press the ▲ or ▼ button to select “Standard” or “Movie”, then press the ENTER button. “Detailed Settings” is available in “Standard” or “Movie” mode. 3. Press the ▲ or ▼ button to select “Detailed Settings”, then press the ENTER button. In PC mode, you can only make changes to “Dynamic Contrast”, “Gamma” and “White Balance” from among the “Detailed Settings” items. Black adjust: Off/Low/Medium/High You can select the black level on the screen to adjust the screen depth. Dynamic Contrast: Off/Low/Medium/High You can adjust the screen contrast so that the optimal contrast is provided. Gamma: - ~ + You can adjust the Primary Colour (Red, Green, Blue) Intensity. Colour Space: Auto/Native/Custom Colour Space is a colour matrix composed of red, green and blue colours. Select your favorite Colour Space to experience the most natural colour. Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on programme sources. Native: Native Colour Space offers deep and rich colour tone. Custom: Adjusts the colour range to suit your preference. • • • Customizing the Colour Space Colour: Red/Green/Blue/Yellow/Cyan/Magenta Adjusts the Colour range to suit your preference. “Colour” is available when “Colour Space” is set to “Custom”. Press the ▲ or ▼ button to select “Red”, “Green”, “Blue”, “Yellow”, “Cyan” or “Magenta”. Press the ENTER button. Red/Green/Blue: In “Colour”, you can adjust the RGB values for the selected colour. Press the ▲ or ▼ button to select “Red”, “Green” or “Blue” to change it. Press the ENTER button. Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER button. Reset: Resets the colour space to the default values. White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset You can adjust the colour temperature for more natural picture colours. R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the adjusted screen. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. Press the ◄ or ► button until you reach the optimal setting. Reset: The previously adjusted white balance will be reset to the factory defaults. Flesh Tone: -1 ~ +1 You can emphasize the pink ‘flesh tone’ in the picture. Press the ◄ or ► button until you reach the optimal setting. Changing the adjustment value will refresh the adjusted screen. Edge Enhancement: Off/On You can emphasize object boundaries in the picture. xvYCC: Off/On Setting the xvYCC mode to On increases detail and colour space when watching movies from an external device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set the Picture Mode to Movie to enjoy this feature. “xvYCC” is available when the picture mode is set to “Movie”, and the external input is set to “HDMI” or “Component” mode. If xvYCC function is active, PIP cannot be selected. ➣ ➣     ➣   ➣   ➣ ➣ Detailed Settings Black Adjust : Off ► Dynamic Contrast : Low Gamma : 0 Colour Space : Native White Balance Flesh Tone : 0 Edge Enhancement : On Move Enter Return Mode : Standard Backlight : 7 Contrast : 95 Brightness : 45 Sharpness : 50 Colour : 50 Tint (G/R) : G50/R50 Detailed Settings Picture BN68-01409H-00ENG.indb 26 2008-04-28 �� 5:18:22English - 27 Configuring Picture Options Activating Picture Options 1. Press the MENU button to display the menu. Press the ENTER button to select “Picture”. 2. Press the ▲ or ▼ button to select “Picture Options”, then press the ENTER button. Press the ▲ or ▼ button to select a particular item. Press the ENTER button. When you are satisfied with your setting, press the ENTER button. In PC mode, you can only make changes to the “Colour Tone” and “Size” from among the items in “Picture Options”. Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2 You can select the most comfortable colour tone to your eyes. The adjusted values are stored according to the selected “Picture” mode. “Warm1” or “Warm2” is only activated when the picture mode is “Movie”. Size: Auto Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan You can select the picture size which best corresponds to your viewing requirements. Auto Wide: Automatically adjusts the picture size to the “16:9” aspect ratio. 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting. Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size. 4:3: This is the default setting for a video movie or normal broadcasting. Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i/1080p) or Component (1080i/1080p) signals are input. • • • • • • “Auto Wide” function is available only in “TV”, “Ext.1”, “Ext.2”, “AV”, and “S-Video” mode. In PC Mode, only “16:9” and “4:3” mode can be adjusted. Settings can be adjusted and stored for each external device you have connected to an input of the TV. Temporary image retention may occur when viewing a static image on the set for more than two hours. “Wide Zoom”: Press the ► button to Select “Position”, then press the ENTER button. Press the ▲ or ▼ button to move the screen up/down. Then press the ENTER button. “Zoom”: Press the ► button to Select “Position”, then press the ENTER button. Press the ▲ or ▼ button to move the picture up and down. Then press the ENTER button. Press the ► button to Select “Size”, then press the ENTER button. Press the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTER button. When Double ( , ) mode has been set in PIP, the Picture Size cannot be set. After selecting “Just Scan” in HDMI (1080i/1080p) or Component (1080i/1080p) mode: Select “Position” by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture. Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER button. You can initialize the setting. If you use the “Just Scan” function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function. You can select these options by simply pressing the P.SIZE button on the remote control. Screen Mode: 16:9/Wide Zoom/Zoom/4:3 When setting the picture size to “Auto Wide” in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it. 16:9: Sets the picture to 16:9 wide mode. Wide Zoom: Magnify the size of the picture more than 4:3. Zoom: Magnify the size of the picture vertically on screen. 4:3: Sets the picture to 4:3 normal mode. • • • • This function is available in “Auto Wide” mode. This function is not available in “PC”, “Component” or “HDMI” mode. ➣ ➣ ➣  ➣ ➣  ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ O  ➣ ➣ Tint (G/R) : G50/R50 Detailed Settings Picture Options ► Picture Reset Picture Picture Options Colour Tone : Normal ► Size :Auto Wide Screen Mode : 16:9 Digital NR :Auto DNle : Off HDMI Black Level : Medium Movie Plus : Low ▼ Move Enter Return 1_BN68-01409H-Eng.indd 27 2008-04-29 �� 3:51:17English - 8 Resetting the Picture Settings to the Factory Defaults 1. To select the desired picture mode, follow the “Changing the Picture Standard” instructions numbers 1 and 2. (see page 25) 2. Press the ▲ or ▼ button to select “Picture Reset”, then press the ENTER button. 3. Press the ▲ or ▼ button to select “OK” or “Cancel”, then press the ENTER button. Press the EXIT button to exit. ➣ Each mode can be reset. Digital NR: Off/Low/Medium/High/Auto If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. When the signal is weak, select one of the other options until the best picture is displayed. DNIe: Off/Demo/On This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality. DNIe™ (Digital Natural Image engine) DNIe™ This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIe™ technology will fit every signal into your eyes. This function is not available in “Movie” and “Standard” mode. HDMI Black Level: Normal/Low You can directly select the black level on the screen to adjust the screen depth. This function is active only when the external input connects to HDMI (RGB signals). Movie Plus: Off/Low/Medium/High/Demo You can view more natural skin and clear text even in fast moving scenes. Use this function when watching movies. This function is not available in “Wide Zoom” and “Zoom” modes. This function is not available when “PIP” is set to “On”. It is not supported in HDMI 1080p/24Hz, 25Hz, 30Hz mode. Blue Only Mode: Off/On This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc. Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal level of each video device using the Red/Green/Blue/ Cyan/Magenta/Yellow Colour Bar Patterns, without using an additional Blue Filter. “Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.  ➣  ➣ ➣  ➣  ➣ ➣ ➣ ➣  ➣ Picture Detailed Settings Picture Options Picture Reset OK ► Cancel BN68-01409H-00ENG.indb 28 2008-04-28 �� 5:18:23English - 9 Viewing Picture-in-Picture You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. 3. Press the ENTER button. Press the ▲ or ▼ button to select “On”, then press the ENTER button. 4. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. 5. When you are satisfied with your setting, press the ENTER button. 6. Press the EXIT button to exit. You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke. PIP: On/Off You can activate or deactivate the PIP function. Main picture Sub picture Component HDMI 1, HDMI/DVI 2, HDMI 3 PC TV, Ext.1, Ext.2, AV Easy Setting 1. Press the TOOLS button on the remote control. 2. Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. 3. Press the ◄ or ► button to select “On”. 4. Press the ▲ or ▼ button to select a particular item. 5. Press the ◄ or ► button to select the required option. 6. Press the EXIT or TOOLS button to exit. Source You can select a source of the sub-picture. Size: / / You can select a size of the sub-picture. If main picture is in “HDMI” mode, “Size” is available. Position: / / / You can select a position of the sub-picture. In Double ( , ) mode, “Position” cannot be selected. Channel You can select a channel of the sub-picture only when the “Source” is set to “TV”. ➣    ➣  ➣  Setup Entertainment : Off Energy Saving : Off PIP ► Software Upgrade Common Interface PIP PIP : On Source : TV Size : Position : Channel : ATV 11 Move Enter Return PIP PIP ◄ Off ► Source : TV Size : Posion : Channel : ATV 11 Adjust Return TOOLS Device List Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off PIP Energy Saving : Off Move Enter e Exit BN68-01409H-00ENG.indb 29 2008-04-28 �� 5:18:23English - 0 Sound Control Changing the Sound Standard You can select the sound mode to best suit the programming you’re watching. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. 3. When you are satisfied with your setting, press the ENTER button. 4. Press the EXIT button to exit. Mode: Standard/Music/Movie/Speech/Custom You can select the type of special sound effect to be used when watching a given broadcast. Easy Setting 1. Press the TOOLS button on the remote control. 2. Press the ▲ or ▼ button to select “Sound Mode”. 3. Press the ◄ or ► button to select the required option. 4. Press the EXIT or TOOLS button to exit. Equalizer: Mode/Balance/100Hz/00Hz/1kHz/kHz/10kHz/Reset The sound settings can be adjusted to suit your personal preferences. The adjusted values are stored according to the selected “Sound” mode. Reset: Resets the equalizer settings to the default values. SRS TruSurround XT: Off/On TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. Easy Setting 1. Press the TOOLS button on the remote control. 2. Press the ▲ or ▼ button to select “SRS TS XT”. 3. Press the ◄ or ► button to select the “Off” or “On”. 4. Press the EXIT or TOOLS button to exit. TruSurround XT, SRS and Symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. Audio Language You can change the default value for audio languages. Displays the language information for the incoming stream. While viewing a Digital channel, this function can be selected. You can only select the language among the actual languages being broadcast.   ➣ ➣   ➣ ➣ Mode : Custom ► Equalizer SRS TruSurround XT : Off Audio Language : ---- Audio Format : ---- Audio Description Auto Volume : Off TV Speaker : On Sound Enter Return Equalizer Mode : Custom Balance L R 100Hz - + 300Hz - + 1kHz - + 3kHz - + 10kHz - + ▼ Move Adjust TOOLS Device List Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT ◄ Off ► Energy Saving : Off Dual l ll : Mono Move Adjust e Exit TOOLS Device List Picture Mode : Standard Sound Mode ◄ Custom ► Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l ll : Mono Move Adjust e Exit BN68-01409H-00ENG.indb 30 2008-04-28 �� 5:18:24English - 1 Audio Format: MPEG/Dolby Digital When sound is emitted from both the main speaker and the audio receiver, a around echo may occur due to the decoding speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function. While viewing a Digital channel, this function can be selected. You can only select the language among the actual languages being broadcast. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Audio Description This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the Audio Description On or Off and control the volume. − Audio Description : On/Off − Volume : 0~100 “Volume” is active when “Audio Description” is set to “On”. While viewing a Digital channel, this function can be selected. Auto Volume: Off/On Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. TV Speaker: Off/On If you want to hear the sound through separate speakers, cancel the internal amplifier. The +, – and MUTE buttons do not operate when the “TV Speaker” is set to “Off”. When “TV Speaker” is set to “Off”, you can operate only “Sound Select” (in PIP mode) and “Sound Reset” in Sound menu. TV's Internal Speakers Audio Out (Optical, L/R Out) to Sound System RF AV, S-Video Component, PC, HDMI RF AV, S-Video Component, PC, HDMI TV Speaker On Speaker Output Speaker Output Speaker Output Sound Output Sound Output Sound Output TV Speaker Off Mute Mute Mute Sound Output Sound Output Sound Output Video No Signal Mute Mute Mute Mute Mute Mute Sound Select: Main/Sub When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. − Main: Used to listen to the sound of the main picture. − Sub: Used to listen to the sound of the sub picture. Sound Reset: Reset All/Reset Sound Mode/Cancel You can restore the Sound settings to the factory defaults.  ➣ ➣  ➣ ➣   ➣ ➣   BN68-01409H-00ENG.indb 31 2008-04-28 �� 5:18:24English -  Connecting Headphones (Sold separately) You can connect a set of headphones to your set if you wish to watch a TV program without disturbing other people in the room. When you insert the headphone’s plug into the headphone jack, you can not operate “Mode”, “Equalizer”, “SRS TruSurround XT” and “TV Speaker” in Sound menu. Prolonged use of headphones at a high volume may damage your hearing. You will not hear sound from the speakers when you connect headphones to the TV. The headphone volume and TV volume are adjusted separately. ➣ ➣ ➣ ➣ Selecting the Sound Mode You can set the sound mode in the “Tools” menu. When you set to “Dual I II”, the current sound mode is displayed on the screen. 1. Press the TOOLS button on the remote control. 2. Press the ▲ or ▼ button to select “Dual I II”. 3. Press the ◄ or ► button to select required option. 4. Press the ENTER button. Audio Type Dual 1/ Default A2 Stereo Mono MONO Automatic change Stereo STEREO ↔ MONO Dual DUAL 1 ↔ DUAL 2 DUAL 1 NICAM Stereo Mono MONO Automatic change Stereo MONO ↔ STEREO Dual MONO ↔ DUAL 1 DUAL 2 DUAL 1 If the stereo signal is weak and an automatic switching occurs, then switch to the Mono. This function is only activated in stereo sound signal. It is deactivated in mono sound signal. This function is only available in Analogue TV mode. ➣ ➣ ➣ TV Side Panel 15 TOOLS Device List Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving : Off Dual l ll ◄ Mono ► Move Adjust e Exit BN68-01409H-00ENG.indb 32 2008-04-28 �� 5:18:25English -  Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) If you disconnect the power cord, you have to set the clock again. Option 1: Setting the Clock Manually 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Press the ▲ or ▼ button to select “Time”, then press the ENTER button. 2. Press the ENTER button to select “Clock”. 3. Press the ENTER button to select “Clock Mode”. Press the ▲ or ▼ button to select “Manual”, then press the ENTER button. 4. Press the ▲ or ▼ button to select “Clock Set”, then press the ENTER button. 5. Press the ◄ or ► button to move to “Day”, “Month”, “Year”, “Hour” or “Minute”. Set the date and time you want by pressing the ▲ or ▼ button, then press the ENTER button. Press the EXIT button to exit. The current time will appear every time you press the INFO button. You can set the month, day, year, hour and minute directly by pressing the number buttons on the remote control. ➣ ➣ ➣ Time Setting Setup Plug & Play Language : English Time ► Change PIN Parental Lock Subtitle Teletext Language : ---- Preference Light Effect : In Watching TV Wall-Mount Adjustment Time Clock : -- : -- ► Sleep Timer : Off Timer 1 : Inactivated Timer 2 : Inactivated Timer 3 : Inactivated Move Enter Return Clock Clock Mode : Auto Clock Set Enter Return Auto Manual Move Clock Clock Mode : Manual Clock Set ► Move Enter Return Clock Set 01 Day 01 Month 2008 Year 00 Hour 00 Minute Move Adjust Enter Return BN68-01409H-00ENG.indb 33 2008-04-28 �� 5:18:25English - 4 Setting the Sleep Timer You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Time”, then press the ENTER button. 3. Press the ▲ or ▼ button to select “Sleep Timer”, then press the ENTER button. 4. Press the ▲ or ▼ button repeatedly until the desired time appears (Off, 30, 60, 90, 120, 150, 180). Press the ENTER button. 5. Press the EXIT button to exit. The TV automatically switches to standby mode when the timer reaches 0. Easy Setting 1. Press the TOOLS button on the remote control. 2. Press the ▲ or ▼ button to select “Sleep Timer”. 3. Press the ◄ or ► button to select the minute. 4. Press the EXIT or TOOLS button to exit. ➣ Option : Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Press the ▲ or ▼ button to select “Time”, then press the ENTER button. 2. Press the ENTER button to select “Clock”. 3. Press the ENTER button to select “Clock Mode”. Press the ▲ or ▼ button to select “Auto”, then press the ENTER button. 4. Press the EXIT button to exit. Setup Plug & Play Language : English Time ► Change PIN Parental Lock Subtitle Teletext Language : ---- Preference Light Effect : In Watching TV Wall-Mount Adjustment Time Clock : -- : -- -- Sleep Timer : Off Timer 1 : Inactivated Timer 2 : Inactivated Timer 3 : Inactivated Off 30 min 60 min 90 min 120 min 150 min ▼ Move Enter Return Clock Clock Mode : Auto Clock Set Enter Return Auto Manual Move Time Clock : 00 : 00 ► Sleep Timer : Off Timer 1 : Inactivated Timer 2 : Inactivated Timer 3 : Inactivated Move Enter Return Setup Plug & Play Language : English Time ► Change PIN Parental Lock Subtitle Teletext Language : ---- Preference Light Effect : In Watching TV Wall-Mount Adjustment TOOLS Device List Picture Mode : Standard Sound Mode : Custom Sleep Timer ◄ Off ► SRS TS XT : Off Energy Saving : Off Dual l ll : Mono Move Adjust e Exit BN68-01409H-00ENG.indb 34 2008-04-28 �� 5:18:25English -  Switching the Television On and Off Automatically 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Time”, then press the ENTER button. 3. Press the ▲ or ▼ button to select “Timer 1”, “Timer 2”, “Timer 3”, then press the ENTER button. Three different On/Off Timer Settings can be made. You must set the clock first. 4. Press the ◄ or ► button to select the desired item below. Press the ▲ or ▼ button to adjust to the setting satisfied. On Time: Set the Hour, Minute, and Activate/Inactivate. (To activate timer with the setting you’ve chosen, set to “Activate”.) Off Time: Set the Hour, Minute, and Activate/Inactivate. (To activate timer with the setting you’ve chosen, set to “Activate”.) Volume: Set the required volume level. Contents: When the “On Timer” is active, you can turn on a specific channel or play back contents such as photo or audio files. TV/USB: Select TV or USB. (Make sure that an USB device is connected to your TV.) Antenna: Select “ATV” or “DTV”. Channel: Select the desired channel. Music: Select the folder containing MP3 files on the USB device. Photo: Select the folder containing JPEG files on the USB device. Repeat: Select “Once”, “Everyday”, “Mon~Fri”, “Mon~Sat”, “Sat~Sun”, or “Manual”. When “Manual” is selected, press the ► button to select the desired day of the week. Press the ENTER button over the desired day and the mark will appear. • • • • – – – – – • ➣ Press the EXIT button to exit. You can set the hour, minute and channel by pressing the number buttons on the remote control. Auto Power Off When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too long time. ➣ ➣ ➣ Contents TV TV/USB am Channel None Music Move Adjust Enter Return ATV Antenna  Channel None Photo Time Clock : 10 : 00 Sleep Timer : Off Timer 1 : Inactivated ► Timer 2 : Inactivated Timer 3 : Inactivated Move Enter Return Timer 1 00 00 00 00 Inactivate Inactivate On Time Off Time Once Move Adjust Enter Return Volume 10 Contents Repeat Sun Mon Tue Wed Thu Fri Sat TV ATV 3 Setup Plug & Play Language : English Time ► Change PIN Parental Lock Subtitle Teletext Language : ---- Preference Light Effect : In Watching TV Wall-Mount Adjustment BN68-01409H-00ENG.indb 35 2008-04-28 �� 5:18:26English - 6 Selecting a Menu Language 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Press the ▲ or ▼ button to select “Language”, then press the ENTER button. 2. Select a particular language by pressing the ▲ or ▼ button repeatedly. Press the ENTER button. 3. Press the EXIT button to exit. Function Description Setting Up Your Personal ID Number (PIN) 1. Press the MENU button to display the menu. 2. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 3. Press the ▲ or ▼ button to select “Change PIN”, then press the ENTER button. The “Enter PIN” is displayed. 4. Enter your current 4-digit PIN code by using the numeric buttons (0~9). The “Enter New PIN” is displayed. 5. Enter your new PIN code by using the numeric buttons (0~9) The “Confirm New PIN” is displayed. 6. Re-enter your new PIN code to confirm by using the numeric buttons (0~9). The “PIN is changed successfully” message is displayed. 7. Press the EXIT button to exit. If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to 0-0-0-0: POWER (Off), MUTE, 8, , 4, POWER (On). ➣ ➣ ➣ ➣ Setup Plug & Play Language : English ► Time Change PIN Parental Lock Subtitle Teletext Language : ---- Preference Light Effect : In Watching TV Setup Language : English Time Change PIN ► Parental Lock Subtitle Teletext Language : ---- Preference Light Effect : In Watching TV Wall-Mount Adjustment Melody : Off Change PIN * * Enter PIN * 0~9 Enter PIN Return Change PIN 0~9 Enter PIN Return Enter New PIN Confirm New PIN BN68-01409H-00ENG.indb 36 2008-04-28 �� 5:18:26English -  Setting up the Parental Lock This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by a 4-digit PIN (Personal Identification Number) code that is defined by the user. 1. Press the MENU button to display the menu. 2. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 3. Press the ▲ or ▼ button to select “Parental Lock”, then press the ENTER button. The “Enter PIN” is displayed. 4. Enter your current 4-digit PIN code by using the numeric buttons (0~9). The default PIN code for a new TV set is 0000. If you want to change PIN number, refer to 36 page. 5. Press the ENTER button. 6. Press the ▲ or ▼ button to select the age rating you want to lock out. Press the ENTER button. The “ ” symbol will be displayed. Allow All: Press to unlock all TV ratings. Block All: Press to lock all TV ratings. 7. Press the EXIT button to exit. ➣ ➣ ➣ ➣ Parental Lock * * Enter PIN * 0~9 Enter PIN Return Setup Time Change PIN Parental Lock ► Subtitle Teletext Language : ---- Preference Light Effect : In Watching TV Wall-Mount Adjustment Melody : Off Entertainment : Off Parental Rating ▼  4  6  8 9 Allow All Block All Move Enter Return Parental Lock Parental Rating ► Enter Return BN68-01409H-00ENG.indb 37 2008-04-28 �� 5:18:26English - 8 Setting the Subtitle You can activate and deactivate the subtitles. Use this menu to set the Subtitle Mode. “Normal” under the menu is the basic subtitle and “Hard of hearing” is the subtitle for a hearing-impaired person. 1. Press the MENU button to display the menu. 2. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 3. Press the ▲ or ▼ button to select “Subtitle”, then press the ENTER button. 4. Press the ENTER button again, then press the ▲ or ▼ button to select “On”. Press the ENTER button. 5. Press the ▲ or ▼ button to select “Mode”, then press the ENTER button. 6. Press the ▲ or ▼ button to select “Normal” or “Hard of hearing”. Press the ENTER button. If the programme you are watching does not support the “Hard of hearing” function, “Normal” automatically activates even though “Hard of hearing” mode is selected. 7. Press the ▲ or ▼ button to select “Subtitle Language”, then press the ENTER button. 8. Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice. English is the default in cases where the selected language is unavailable in the broadcast. 9. Press the EXIT button to exit. You can select these options simply by pressing the SUBT. button on the remote control. ➣ ➣ O Setup Change PIN Parental Lock Subtitle ► Teletext Language : ---- Preference Light Effect : In Watching TV Wall-Mount Adjustment Melody : Off Entertainment : Off Energy Saving : Off Subtitle Subtitle : Off ► Mode : Normal Subtitle Language : ---- Move Enter Return BN68-01409H-00ENG.indb 38 2008-04-28 �� 5:18:26Selecting a Teletext Language You can set the Teletext language by selecting the language type. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Teletext Language”, then press the ENTER button. 3. Select a particular language by pressing the ▲ or ▼ button repeatedly. Press the ENTER button. English is the default in cases where the selected language is unavailable in the broadcast. 4. Press the EXIT button to exit. ➣ Selecting a Preference Language This menu consists of 6 sub-menus: Primary Audio Language, Secondary Audio Language, Primary Subtitle Language, Secondary Subtitle Language, Primary Teletext Language, Secondary Teletext Language. Using this feature, users can select one of the languages. The language selected here is the default when the user selects a channel. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Preference”, then press the ENTER button. 3. Press the ▲ or ▼ button to select required menu (Primary Audio Language, Secondary Audio Language, Primary Subtitle Language, Secondary Subtitle Language, Primary Teletext Language, Secondary Teletext Language). Press the ENTER button. 4. Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice. 5. Press the EXIT button to exit. If you change the language setting, the Subtitle Language, Audio Language, and the Teletext Language of the Language menu are automatically changed to the selected language. The Subtitle Language, Audio Language, and the Teletext Language of the Language menu show a list of languages supported by the current channel and the selection is highlighted. If you change this language setting, the new selection is only valid for the current channel. The changed setting does not change the setting of the Primary Subtitle Language, Primary Audio Language, or the Primary Teletext Language of the Preference menu. ➣ ➣ English - 9 Setting the Light Effect (depending on the model) You can turn on/off the LED on the front of TV according to the situation. Use it for saving power or when the LED dazzles your eyes. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Light Effect”, then press the ENTER button. 3. Press the ▲ or ▼ button to select “Off”, “In Standby”, “In Watching TV” or “Always”. Press the ENTER button. Off: LED will not come on. In Standby: Turns the LED on in standby mode. In Watching TV: Turns the LED on while watching TV. Always: LED is always on. • • • • Set the “Light Effect” to “Off” to reduce the power consumption. 4. Press the EXIT button to exit. ➣ Setup Teletext Language : ---- Preference Light Effect : In Watching TV ► Wall-Mount Adjustment Melody : Off Entertainment : Off Energy Saving : Off PIP Software Upgrade Common Interface Setup Parental Lock Subtitle Teletext Language : ---- ► Preference Light Effect : In Watching TV Wall-Mount Adjustment Melody : Off Entertainment : Off Energy Saving : Off PIP Setup Subtitle Teletext Language : ---- Preference ► Light Effect : In Watching TV Wall-Mount Adjustment Melody : Off Entertainment : Off Energy Saving : Off PIP Software Upgrade LED BN68-01409H-00ENG.indb 39 2008-04-28 �� 5:18:27English - 40 Melody/Entertainment/Energy Saving 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. 3. When you are satisfied with your setting, press the ENTER button. 4. Press the EXIT button to exit. Melody: Off/Low/Medium/High The TV power on/off melody sound can be adjusted. The Melody does not play − When no sound is output from the TV because the MUTE button has been pressed. − When no sound is output from the TV because the – (Volume) button has been pressed. − When the TV is turned off by Sleep Timer function. Entertainment: Off/Sports/Cinema/Game The “Entertainment” mode enables you to select the optimal display and sound for sports, cinema and games. Off: Switches the “Entertainment” function off. Sports: Provides the optimal picture and sound quality for sports. Cinema: Provides the optimal picture and sound quality for movie watching. You can experience a richer picture and enhanced sound. Game: Provides the optimal picture and sound quality for games. This mode accelerates the playing speed when using an external game console connected to the TV. • • • • If you set any of the three “Entertainment” modes to On, the settings will be locked and can not be adjusted. If you want to make Picture and Sound mode adjustments, the “Entertainment” mode must be turned off. If you set any of the three “Entertainment” modes to On, “SRS TruSurround XT” function is not available. The “Entertainment” settings are saved for each input source. You can press the E.MODE button on the remote control repeatedly to change the “Entertainment” setting. Energy Saving: Off/Low/Medium/High/Auto This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the “Energy Saving” mode option to “High” to reduce eye fatigue as well as power consumption. Off: Turns off the energy saving function. Low: Sets the TV to low energy saving mode. Medium: Sets the TV to medium energy saving mode. High: Sets the TV to high energy saving mode. Auto: Automatically adjusts the brightness of the TV screen in accordance with the scenes. • • • • • Easy Setting 1. Press the TOOLS button on the remote control. 2. Press the ▲ or ▼ button to select “Energy Saving”. 3. Press the ◄ or ► button to select the “Off”, “Low”, “Medium”, “High”, “Auto” or “On”. 4. Press the EXIT or TOOLS button to exit.  ➣  ➣ ➣ ➣ O  English - 40 Setup Light Effect : In Watching TV Wall-Mount Adjustment Melody : Off ► Entertainment : Off Energy Saving : Off PIP Software Upgrade Common Interface TOOLS Device List Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off Energy Saving ◄ Off ► Dual l ll : Mono Move Adjust e Exit BN68-01409H-00ENG.indb 40 2008-04-28 �� 5:18:27English - 41 Upgrading the Software To keep your product up-to-date with new Digital Television features then software upgrades are periodically broadcast as part of the normal Television signal. It will automatically detect these signals and display the software upgrade banner. You are given the option to install the upgrade. 1. Insert a USB drive containing the firmware upgrade into the WISELINK port on the side of the TV. 2. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 3. Press the ▲ or ▼ button to select “Software Upgrade”, then press the ENTER button. 4. Press the ▲ or ▼ button to select “BY USB”, “BY Channel” or “Standby Mode Upgrade”. Press the ENTER button. BY USB : - Preset : Insert a USB drive containing the firmware upgrade into TV. Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete. When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade. BY Channel : Upgrades the software using the broadcasting signal. Standby Mode Upgrade : To continue software upgrade with master power on, Select On by pressing the ▲ or ▼ button. 45 minutes after entering standby mode, a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen may be on slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software upgrade is completed. Alternative Software : To display the software version information.  ➣    Setup Energy Saving : Off PIP Software Upgrade ► Common Interface HDMI IN3 TV Side Panel USB Drive Software Upgrade Current Version 2008/01/01_000075 BY USB ► BY Channel Standby Mode Upgrade : On Version Change ----/--/--_-------- Move Enter Return BN68-01409H-00ENG.indb 41 2008-04-28 �� 5:18:27English - 4 Viewing Common Interface This contains information on CAM inserted in the CI slot and displays it. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Common Interface”, then press the ENTER button. 3. Press the ▲ or ▼ button to select “Application Info.” Press the ENTER button to display the information for your application. 4. Press the EXIT button to exit. The Application Info inserting is about the CI CARD. You can install the CAM anytime whether the TV is ON or OFF. 1. Purchase the CI CAM module by visiting your nearest dealer or by phone. 2. Insert the CI CARD into the CAM in the direction of the arrow until it fits. 3. Insert the CAM with the CI CARD installed into the common interface slot. (Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.) 4. Check if you can see a picture on a scrambled signal channel. Selecting the CI (Common Interface) Menu This enables the user to select from the CAM-provided menu. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Common Interface”, then press the ENTER button. 3. Press the ▲ or ▼ button to select “CI Menu”, then press the ENTER button. 4. Press the ▲ or ▼ button to select the required option, then press the ENTER button. 5. Press the EXIT button to exit. Select the CI Menu based on the menu PC Card. ➣ ➣ Setup PIP Software Upgrade Common Interface ► Common Interface CI Menu ► Application Info. U Move EEnter e Exit CI Menu Main menu Module information Smart card information Language Software Download Press Ok to select, or Exit to quit. U Move EEnter e Exit Setup PIP Software Upgrade Common Interface ► Common Interface CI Menu ► Application Info. U Move EEnter e Exit BN68-01409H-00ENG.indb 42 2008-04-28 �� 5:18:28English - 4 To Select the Source Use to select TV or other external input sources such as DVD players or Cable Box/Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Input”, then press the ENTER button. 2. Press the ENTER button to select “Source List”. Press the ▲ or ▼ button to select signal source, then press the ENTER button. Available signal sources: TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2/DVI, HDMI3, USB. You can choose only those external devices that are connected to the TV. In the “Source List”, connected inputs will be highlighted and sorted to the top. Inputs that are not connected will be sorted to the bottom. Using the Colour buttons on the remote with the Source list Red (Refresh): Refreshes the connecting external devices. TOOLS (Option): Displays the “Edit Name” and “Information” menus. • • Press the SOURCE button on the remote control to view an external signal source. TV mode can be selected by pressing the TV/DTV button, number buttons(0~9), and the P button on the remote control. ➣ ➣ ➣ O To Edit the Input Source Name Name the device connected to the input jacks to make your input source selection easier. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Input”, then press the ENTER button. Press the ▲ or ▼ button to select “Edit Name”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Ext.1”, “Ext.2”, “AV”, “S-Video”, “Component”, “PC”, “HDMI1”, “HDMI2/DVI” or “HDMI3” input jack, then press the ENTER button. 3. Press the ▲ or ▼ button to select “VCR”, “DVD”, “Cable STB”, “Satellite STB”, “PVR STB”, “AV Receiver”, “Game”, “Camcorder”, “PC”, “TV”, “IPTV”, “Blu-Ray”, “HD DVD” or “Digital Media Adapter” input source, then press the ENTER button. Press the EXIT button to exit. When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN 2 port, you should set the “HDMI2/DVI” mode to “PC” in the “Edit Name” of the “Input” mode. ➣ Source List Edit Name Input TV Ext.1 ---- Ext.2 ---- AV ---- S-Video ---- Component ---- PC ---- Refresh Option Source List Edit Name ► Input Edit Name Ext.1 : ---- ► Ext.2 : ---- AV : ---- S-Video : ---- Component : ---- PC : ---- HDMI1 : ---- ▼ Move Enter Return Edit Name Ext.1 : ---- Ext.2 : ---- AV : ---- S-Video : ---- Component : ---- PC : ---- HDMI1 : ---- ---- VCR DVD Cable STB Satellite STB PVR STB Move Enter Return BN68-01409H-00ENG.indb 43 2008-04-28 �� 5:18:28English - 44 Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. First, click on “Control Panel” on the Windows start menu. 2. When the control panel window appears, click on “Appearance and Themes” and a display dialog-box will appear. 3. When the control panel window appears, click on “Display” and a display dialogbox will appear. 4. Navigate to the “Settings” tab on the display dialog-box. The correct size setting (resolution) Optimum: 1920 X 1080 pixels If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box. PC Display Display Modes Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended. D-Sub Input Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H/V) IBM 640 x 350 720 x 400 31.469 31.469 70.086 70.087 25.175 28.322 + / - - / + VESA 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1280 x 1024 1280 x 1024 1360 x 768 1600 x 1200 31.469 37.861 37.500 37.879 48.077 46.875 48.363 56.476 60.023 63.981 79.976 47.712 75.000 59.940 72.809 75.000 60.317 72.188 75.000 60.004 70.069 75.029 60.020 75.025 60.015 60.000 25.175 31.500 31.500 40.000 50.000 49.500 65.000 75.000 78.750 108.000 135.000 85.500 162.000 - / - - / - - / - + / + + / + + / + - / - - / - + / + + / + + / + + / + + / + CVT 1920 x 1080RB 66.587 59.934 138.500 + / - HDMI/DVI Input Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H/V) VESA 640 x 480 800 x 600 1024 x 768 1280 x 1024 1360 x 768 1600 x 1200 31.469 37.879 48.363 63.981 47.712 75.000 59.940 60.317 60.004 60.020 60.015 60.000 25.175 40.000 65.000 108.000 85.500 162.000 - / - + / + - / - + / + + / + + / + CEA 1920 x 1080p 67.500 60.000 148.500 + / + When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack. The interlace mode is not supported. The set might operate abnormally if a non-standard video format is selected. Separate and Composite modes are supported. SOG is not supported. Too long or low quality VGA cable can cause picture noise at high resolution modes (1920x1080 or 1600x1200). ➣ ➣ ➣ ➣ ➣ BN68-01409H-00ENG.indb 44 2008-04-28 �� 5:18:29English - 4 Setting up the TV with your PC Preset: Press the SOURCE button to select PC mode. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Auto Adjustment” or “Screen Adjustment”, then press the ENTER button. 3. When you are satisfied with your setting, press the ENTER button. 4. Press the EXIT button to exit. How to Auto Adjust Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically. This function does not work in DVI-HDMI mode. Easy Setting 1. Press the TOOLS button on the remote control. 2. Press the ▲ or ▼ button to select “Auto Adjustment”, then press the ENTER button. Adjusting the Screen Quality Coarse/Fine The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on the center of screen. Press the ▲ or ▼ button to select “Coarse” or “Fine”, then press the ENTER button. Press the ◄ or ► button to adjust the screen quality. Press the ENTER button. Position Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position. Press the ENTER button. Image Reset You can replace all image settings with the factory default values. ➣ ➣ Brightness : 45 Sharpness : 50 Auto Adjustment ► Screen Adjustment Detailed Settings Picture Options Picture Reset Picture Auto Adjustment in progress. Please Wait. Screen Adjustment Coarse 52 Fine 24 Position Image Reset Move Enter Return Screen Adjustment Coarse 52 Fine 24 Position Image Reset ► Move Enter Return Image Reset is completed. TOOLS Device List Picture Mode : Standard Sound Mode : Custom Sleep Timer : Off SRS TS XT : Off PIP Energy Saving : Off Auto Adjustment Move Enter e Exit Position Adjust Enter Return BN68-01409H-00ENG.indb 45 2008-04-28 �� 5:18:29English - 46 WISELINK Using the WISELINK Function Connecting a USB Device This function enables you to view and listen to photo (JPEG) and audio files (MP3) saved on a USB Mass Storage Class (MSC) device. 1. Press the POWER button on the remote control or front panel. The TV is powered on. 2. Connect a USB device containing JPEG and/or MP3 files to the WISELINK jack (USB jack) on the side of the TV. If you enter the WISELINK mode with no USB device connected the message “No external storage device found. Check the connection status.” will appear. In this case, insert the USB device, exit the screen by pressing the W.LINK button on the remote control and enter the WISELINK screen again. MTP (Media Transfer Protocol) is not supported. The file system only supports FAT16/32 (The NTFS file system is not supported). Certain types of USB Digital camera and audio devices may not be compatible with this TV. Wiselink only supports USB Mass Storage Class devices (MSC). MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported.) Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB Compatibility problem. Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. Do not disconnect the USB device while it is loading. MSC supports MP3 and JPEG files, while a PTP device supports JPEG files only. The sequential jpeg format is supported. Photo and audio files must be named in English, French or Spanish. If not, the files can not be played. Change the file names to English, French or Spanish if necessary. The higher the resolution of the image, the longer it takes to display on the screen. The maximum supported JPEG resolution is 15360x8640 pixels. For unsupported or corrupted files, the “Not Supported File Format” message is displayed. Using the Remote Control Button in WISELINK Menu Button Operations (▲/▼/◄/►) Move the cursor and select an item. ENTER Select the currently selected item. During a Slide Show or Music Play: - Pressing the ENTER button during play pauses the play. - Pressing the ENTER button during pause resumes the play. / Play or pause the Slide Show or Music file. RETURN Return to the previous menu. TOOLS Run various functions from the Photo and Music menus. Pause the Slide Show / Stop the Playing Music file. / Jump to previous group / Jump to next group. INFO Show file information. W.LINK Exit WISELINK mode. P >/< PRE-CH Stop WISELINK mode and Returns to TV mode. EXIT Stop the current function and return to the WISELINK main menu. ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ HDMI IN3 TV Side Panel USB Drive BN68-01409H-00ENG.indb 46 2008-04-28 �� 5:18:31English - 4 Using the WISELINK Menu 1. Press the MENU button. Press the ▲ or ▼ button to select “Application”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “WISELINK”, then press the ENTER button. The “WISELINK” menu is displayed. Press the W.LINK button on the remote control to display the “WISELINK” menu. Press the SOURCE button on the remote control repeatedly to select “USB”, then press the ENTER button. 3. Press the Red button, then press the ▲ or ▼ button to select the corresponding USB Memory Device (i.e. if connected through a hub). Press the ENTER button. This function differs depending on the USB Memory Device connected to TV. The selected USB device name appears at the bottom left of the screen. 4. Press the ◄ or ► button to select an icon (Photo, Music, Setup), then press the ENTER button. To exit “WISELINK” mode, press the W.LINK button on the remote control. ➣ O O ➣ ➣ ➣ Using the Photo List This menu shows Photo files saved on an USB memory device. Photo List 1. Press the W.LINK button on the remote control to display the “WISELINK” menu. 2. Press the ◄ or ► button to select “Photo”, then press the ENTER button. Photo files are displayed. This menu only shows files whose file extension is jpg. Files of other formats such as bmp or tiff will not be displayed. Press the (Play) / ENTER button to start the Slide Show. To move to the previous / next group, press the (REW) or (FF) button. When moving to a photo, loading may take a few seconds. At this point, the loading icon will appear at the screen. It may take some time to load photo files as Thumbnail images. Photos without EXIF information may not be displayed as thumbnail images in the Photo List depending on the picture quality and resolution. ➣ ➣ ➣ ➣ ➣ ➣ ➣ WISELINK Photo SUM  Device Return Music Setup PHOTO SUM 851.98MB/995.00MB Free WISELINK Photo SUM  Device e Exit Music Setup PHOTO SUM 851.98MB/995.00MB Free Photo SUM  Device  Favorites Setting  Select Jump Option image_1.jpg Month : Jan Date : Jan.01.2008 Color : Gray Composition : Folder : P-other Favorite : ★ ★ ★ Preference Monthly Timeline Jan Nov ▲ BN68-01409H-00ENG.indb 47 2008-04-28 �� 5:18:32English - 48 Screen Display Photo SUM  Device  Favorites Setting  Select Jump Option image_1.jpg Month : Jan Date : Jan.01.2008 Color : Gray Composition : Folder : P-other Favorite : ★ ★ ★ Preference Monthly Timeline Jan Nov ▲ 2 1File(s) Selected6 1 3 4 5 7 1 Currently selected photo Shows the currently selected photo. 2 Photo Information Window Shows information about the currently selected photo. You can change the “Color”, “Composition”, and “Favorite”. 3 Current Sort Standard Press the ▲ or ▼ button to change the standard for sorting photos. (“Monthly”, “Timeline”, “Color”, “Composition”, “Folder”, “Preference”) The item that is selected as the sorting standing is highlighted in the Photo Information Window. 4 View Groups Shows the sorting groups. The sorting group including the currently selected photo is highlighted. 5 Current Device Shows the currently selected device name. Press the Red button to select a device. 6 Item Selection Information Shows the number of photos that are selected by pressing the Yellow button. 7 Help Items Red(Device) button: Selects a connected device. Green(Favorites Setting) button: Changes the favorites setting for the selected photo. Press this button repeatedly until the desired value appears. (Refer to page 51) Yellow(Select) button: Selects photos from the photo list. Selected photos are marked with a symbol on the left. (jump) button: Jumps to the previous sorting group / Jumps to the next sorting group. TOOLS(Option) button: Displays the “Slide Show”, “Play Current Group”, “Delete”, “Change Group” (in “Color” or “Composition” group), “Information” or “Remove Safely” menus. • • • • • BN68-01409H-00ENG.indb 48 2008-04-28 �� 5:18:32English - 49 Sorting Photo List You can sort photos in the Photo List by a particular standard. 1. Press the W.LINK button on the remote control to display the “WISELINK” menu. 2. Press the ◄ or ► button to select “Photo”, then press the ENTER button. Photo files are displayed. 3. Press the ▲ or ▼ button to select a sorting standard. (“Monthly”, “Timeline”, “Color”, “Composition”, “Folder”, “Preference”) The photos are sorted according to the newly selected sorting standard. 4. Press the ENTER button to start the Slide Show in the order selected by the user. Wiselink identifies the color and composition of images and groups them accordingly by analyzing the images on the USB device. The “Composition” and “Color” information extracted from a photo file may be different from what you selected. Photo information is automatically set. You can change the “Color”, “Composition”, and “Favorite”. Photos for which information cannot be displayed are set as “Unclassified”. PTP does not support folder sort mode. Monthly Sorts photos by month. It sorts and shows photos in the file by month. It sorts only by month (from January to December) regardless of year. 1. Select “Monthly” as the sorting standard in the Photo List. 2. Press the ◄ or ► button to select from the sublist of files grouped by Month. To move to the previous / next group, press the (REW) or (FF) button. 3. Press the TOOLS button. Press the ▲ or ▼ button to select “Play Current Group”. 4. Press ENTER to play the selected group of photo files from the sublist. Timeline Sorts photos by time. It sorts and shows photos by date. It sorts by year and month from the earliest photo. 1. Select “Timeline” as the sorting standard in the Photo List. 2. Press the ◄ or ► button to select from the sublist of files grouped by Timeline. To move to the previous / next group, press the (REW) or (FF) button. 3. Press the TOOLS button. Press the ▲ or ▼ button to select “Play Current Group”. 4. Press ENTER to play the selected group of photo files from the sublist. ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ Photo SUM  Device  Favorites Setting  Select Jump Option image_1.jpg Month : Jan Date : Jan.01.2008 Color : Gray Composition : Folder : P-other Favorite : ★ ★ ★ Monthly Timeline Color Jan Nov ▲ Slide Show Play Current Group Delete Information ▼ 2008 2008 Photo SUM  Device  Favorites Setting  Select Jump Option image_1.jpg Month : Jan Date : Jan.01.2008 Color : Gray Composition : Folder : P-other Favorite : ★ ★ ★ Preference Monthly Timeline Jan Nov ▲ Slide Show Play Current Group Delete Information ▼ WISELINK Photo SUM  Device e Exit Music Setup PHOTO SUM 851.98MB/995.00MB Free Photo SUM  Device  Favorites Setting  Select Jump Option image_1.jpg Month : Jan Date : Jan.01.2008 Color : Gray Composition : Folder : P-other Favorite : ★ ★ ★ Preference Monthly Timeline Jan Nov ▲ BN68-01409H-00ENG.indb 49 2008-04-28 �� 5:18:34English - 0 Color Sorts photos by color. You can change the photo color information. 1. Select “Color” as the sorting standard in the Photo List. 2. Press the ◄ or ► button to select from the sublist of files grouped by color. To move to the previous / next group, press the (REW) or (FF) button. 3. Press the TOOLS button. Press the ▲ or ▼ button to select “Play Current Group”. 4. Press ENTER to play the selected group of photo files from the sublist. Changing the color information 1. Select “Color” as the sorting standard in the Photo List and press the ◄ or ► button to select a photo. Changing the information of multiple files Press the ◄ or ► button to select the desired photo in the Photo list. Then press the yellow button. Repeat the above operation to select multiple photos. The mark appears to the left of the selected photo. 2. Press the TOOLS button. 3. Press the ▲ or ▼ button to select “Change Group”. Press the ENTER button. 4. Press the ◄ or ► button to select the desired option, then press the ENTER button. The group information of the current file is updated and the file is moved to the new group. “Color” options: Red, Yellow, Green, Blue, Magenta, Black, Gray, Unclassified. Composition Sorts photos by composition. You can change the compositional information of photos. 1. Select “Composition” as the sorting standard in the Photo List. 2. Press the ◄ or ► button to select from the sublist of files grouped by compositon. To move to the previous / next group, press the (REW) or (FF) button. 3. Press the TOOLS button. Press the ▲ or ▼ button to select “Play Current Group”. 4. Press ENTER to play the selected group of photo files from the sublist. Changing the composition information 1. Select “Composition” as the sorting standard in the Photo List and press the ◄ or ► button to select a photo. Changing the information of multiple files Press the ◄ or ► button to select the desired photo in the Photo list. Then press the yellow button. Repeat the above operation to select multiple photos. The mark appears to the left of the selected photo. 2. Press the TOOLS button. 3. Press the ▲ or ▼ button to select “Change Group”. Press the ENTER button. 4. Press the ◄ or ► button to select the desired option, then press the ENTER button. The group information of the current file is updated and the file is moved to the new group. “Composition” options: (horizontal), (vertical), (object), (perspective), (pattern), Unclassified ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ Photo SUM  Device  Favorites Setting  Select Jump Option image_1.jpg Month : Jan Date : Jan.01.2008 Color : Gray Composition : Folder : P-other Favorite : ★ ★ ★ Timeline Color Composition ▲ Photo SUM  Device  Favorites Setting  Select Jump Option image_1.jpg Month : Jan Date : Jan.01.2008 Color : Gray Composition : Folder : P-other Favorite : ★ ★ ★ Color Composition Folder Unclassified ▲ Slide Show Play Current Group Delete Change Group ▼ Photo SUM  Device  Favorites Setting  Select Jump Option image_1.jpg Month : Jan Date : Jan.01.2008 Color : Gray Composition : Folder : P-other Favorite : ★ ★ ★ Color Composition Folder Unclassified ▲ Unclassified Photo SUM  Device  Favorites Setting  Select Jump Option image_1.jpg Month : Jan Date : Jan.01.2008 Color : Gray Composition : Folder : P-other Favorite : ★ ★ ★ Timeline Color Composition ▲ Slide Show Play Current Group Delete Change Group ▼ BN68-01409H-00ENG.indb 50 2008-04-28 �� 5:18:35English - 1 Folder Sorts photos by folder. If there are many folders in USB, the photos files are shown in order in each folder. The photo file in the Root folder is shown first and the others are shown in alphabetical order by name. 1. Select “Folder” as the sorting standard in the Photo List. 2. Press the ◄ or ► button to select from the sublist of files grouped by folder. To move to the previous / next group, press the (REW) or (FF) button. 3. Press the TOOLS button. Press the ▲ or ▼ button to select “Play Current Group”. 4. Press ENTER to play the selected group of photo files from the sublist. Preference Sorts photos by preference. (Favorite) You can change the photo preferences. 1. Select “Preference” as the sorting standard in the Photo List. 2. Press the ◄ or ► button to select from the sublist of files grouped by preference. To move to the previous / next group, press the (REW) or (FF) button. 3. Press the TOOLS button. Press the ▲ or ▼ button to select “Play Current Group”. 4. Press ENTER to play the selected group of photo files from the sublist. Changing the Favorites setting 1. Press the ◄ or ► button to select the desired photo in the Photo list. Changing the information of multiple files Press the ◄ or ► button to select the desired photo in the Photo list. Then press the yellow button. Repeat the above operation to select multiple photos. The mark appears to the left of the selected photo. 2. Press the Green button repeatedly until the desired setting appears. Favorites settings change completed. “Favorite” options: ★ ★ ★ , ★ ★ ★ , ★ ★ ★ , ★ ★ ★ Users can select the number of stars (up to 3) according to their preference. ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ Photo SUM  Device  Favorites Setting  Select Jump Option image_1.jpg Month : Jan Date : Jan.01.2008 Color : Gray Composition : Folder : P-other Favorite : ★ ★ ★ Composition Folder Preference P-other Photo-1 ▲ Slide Show Play Current Group Delete Information ▼ Photo SUM  Device  Favorites Setting  Select Jump Option image_1.jpg Month : Jan Date : Jan.01.2008 Color : Gray Composition : Folder : P-other Favorite : ★ ★ ★ Folder Preference Monthly ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ▲ BN68-01409H-00ENG.indb 51 2008-04-28 �� 5:18:36English -  Deleting the Photo file 1. Press the ◄ or ► button to select the desired photo in the Photo list. 2. Press the TOOLS button. 3. Press the ▲ or ▼ button to select “Delete”, then press the ENTER button. The “Delete this file?” message appear. 4. Press the ◄ or ►button to select “OK”, then press the ENTER button. The photo is deleted. When a read-only file is deleted, the “This File is read-only file. Delete it?” message appear. If you select “Cancel”, the deletion is cancelled. 5. To exit “WISELINK” mode, press the W.LINK button on the remote control. You cannot remove the PTP-connected digital camera picture files. While removing files, don’t remove the USB memory device. You cannot recover a deleted photo file. Deleting Multiple Photos 1. Press the ◄ or ► button to select the desired photo in the Photo list. Then press the yellow button. Repeat the above operation to select multiple photos. The mark appears to the left of the selected photo. 2. Press the TOOLS button. 3. Press the ▲ or ▼ button to select “Delete selected File”, then press the ENTER button. The “Delete the selected files?” message appear. 4. Press the ◄ or ► button to select “OK”, then press the ENTER button. The selected photos are deleted. If you select “Cancel”, the deletion is cancelled. 5. To exit “WISELINK” mode, press the W.LINK button on the remote control. You cannot remove the read-only files from the selected ones. You cannot recover a deleted photo file. Viewing the Photo Information The photo file information including the order of the file in the current directory, the name, the size, the resolution, the date modified and the path is displayed. 1. Press the ◄ or ► button to select the desired photo in the Photo list. 2. Press the TOOLS button. 3. Press the ▲ or ▼ button to select “Information”, then press the ENTER button. The information on the selected photo appears. Press the INFO button to viewing the information. ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ O Name : image_1.jpg Size : 2.0MB Resolution : 440x440 Date : Jan.1.2008 Path : /Photo/ OK Photo Info Photo SUM  Device  Favorites Setting  Select Jump Option image_1.jpg Month : Jan Date : Jan.01.2008 Color : Gray Composition : Folder : P-other Favorite : ★ ★ ★ Preference Monthly Timeline Jan Nov ▲ Slide Show Delete selected File Deselect All Remove Safely 2File(s) Selected Delete OK Cancel Selected File(s) : image... 2 File(s) Delete the selected files? Photo SUM  Device  Favorites Setting  Select Jump Option image_1.jpg Month : Jan Date : Jan.01.2008 Color : Gray Composition : Folder : P-other Favorite : ★ ★ ★ Preference Monthly Timeline Jan Nov ▲ Slide Show Play Current Group Delete Information ▼ Delete OK Cancel Selected File(s) : image... 1 File(s) Delete this file? Photo SUM  Device  Favorites Setting  Select Jump Option image_1.jpg Month : Jan Date : Jan.01.2008 Color : Gray Composition : Folder : P-other Favorite : ★ ★ ★ Preference Monthly Timeline Jan Nov ▲ ▲ Play Current Group Delete Information Remove Safely BN68-01409H-00ENG.indb 52 2008-04-28 �� 5:18:38English -  Viewing a Photo or Slide Show Viewing a Slide Show 1. Press the W.LINK button on the remote control to display the “WISELINK” menu. 2. Press the ◄ or ► button to move to “Photo”, then press the ENTER button. Photo files are displayed. 3. Press the ◄ or ► button to select the desired photo in the Photo list. 4. Press the TOOLS button. 5. Press the ▲ or ▼ button to select “Slide Show”, then press the ENTER button. All files in the photo list will be used for the Slide Show. During the slide show, files are displayed in order from the currently shown file. The Slide Show progresses in the order sorted in the Photo list. Music files can be automatically played during the Slide Show if the “Background Music” is set to “On”. (Refer to page 55). While a photo list is displayed, press the (Play) / ENTER button on the remote control to start slide show. To perform a SlideShow with only the selected files 1. Press the ◄ or ► button to select the desired photo in the Photo list. Then press the yellow button. Repeat the above operation to select multiple photos. The mark appears to the left of the selected photo. If you select one file, the SlideShow will not be performed. 2. Press the (Play) / ENTER button. The selected files will be used for the Slide Show. If you have selected files, only the selected files will be used for the Slide Show. Playing current group 1. Press the ▲ or ▼ button to select a sorting standard. (“Monthly”, “Timeline”, “Color”, “Composition”, “Folder”, “Preference”) 2. Press the ◄ or ► button to select the desired photo in the Photo list. To move to the previous / next group, press the (REW) or (FF) button. 3. Press the TOOLS button. 4. Press the ▲ or ▼ button to select “Play Current Group”, then press the ENTER button. Only the photos in the sorting group including the selected files will be used for the Slide Show. 5. To exit “WISELINK” mode, press the W.LINK button on the remote control. Slide show function information icon (Displayed at the top left of the screen) Icon Current OSD Function ► (Photo) SlideShow Photo Slide Show is in progress. ❙❙ Photo Pause You can pause a Slide Show by pressing the (Pause)/ENTER button on the remote control during a Slide Show. To resume the Slide Show, press the (Play)/ENTER button on the remote control again. ➣ ➣ ➣ ➣ ➣ O ➣ ➣ ➣ ➣ ➣ Photo SUM  Device  Favorites Setting  Select Jump Option image_1.jpg Month : Jan Date : Jan.01.2008 Color : Gray Composition : Folder : P-other Favorite : ★ ★ ★ Preference Monthly Timeline Jan Nov ▲ Slide Show Play Current Group Delete Information ▼ Photo SUM  Device  Favorites Setting  Select Jump Option image_1.jpg Month : Jan Date : Jan.01.2008 Color : Gray Composition : Folder : P-other Favorite : ★ ★ ★ Preference Monthly Timeline Jan Nov ▲ Slide Show Play Current Group Delete Information ▼ SUM EPause Previous Next Option Return ► Normal 20/22 image_1.jpg 440x440 2.0KB 2008/1/1 BN68-01409H-00ENG.indb 53 2008-04-28 �� 5:18:39English - 4 Viewing a photo 1. Press the W.LINK button on the remote control to display the “WISELINK” menu. 2. Press the ◄ or ► button to move to “Photo”, then press the ENTER button. Photo files are displayed. 3. Press the ◄ or ► button to select the desired photo in the Photo list. Then Press the Yellow button to select only one file. 4. Press the ENTER button over a photo icon. The currently selected photo is displayed in full screen. Using the option menu during a slide show (or Viewing a Photo) 1. During a slide show(or viewing a photo), Press the TOOLS button to set the option. 2. Press the ▲ or ▼ button to select the desired option. Then press the ENTER button. Start Slide Show (or Stop Slide Show) You can start or stop a Slide Show. Press the ▲ or ▼ button to select “Start Slide Show” (or “Stop Slide Show”), then press the ENTER button. You can select the SlideShow speed only during a slide show. You can also change the speed of the Slide Show by pressing the (REW) or (FF) button during the Slide Show. Rotate You can rotate images in full screen mode. Press the ▲ or ▼ button to select “Rotate”, then press the ENTER button. Press the ◄ or ► button repeatedly to rotate the photo by the desired amount. Whenever you press the ◄ button, it rotates by 270˚, 180˚, 90˚, and 0˚. Whenever you press the ► button, it rotates by 90˚, 180˚, 270˚, and 0˚. If you have select “Zoom”, the “Rotate” deactivated. The rotated file is not saved. The Rotating function information icon is displayed at the top right of the screen Icon Current OSD Function 0˚ Rotating (0°) This rotates a photo to its original position 90˚ Rotating (90°) This rotates a photo by 90 degrees 180˚ Rotating (180°) This rotates a photo by 180 degrees 270˚ Rotating (270°) This rotates a photo by 270 degrees ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ SUM ESlide Show Previous Next Option Return 20/22 image_1.jpg 440x440 2.0KB 2008/1/1 TOOLS Stop Slide Show Rotate Zoom Slide Show Speed : Normal Background Music : Off Background Music Setting Picture Mode : Standard Sound Mode : Custom Information Move Enter e Exit Rotate 90˚ BN68-01409H-00ENG.indb 54 2008-04-28 �� 5:18:39English -  Zoom You can zoom into images in full screen mode. Press the ▲ or ▼ button to select “Zoom”, then press the ENTER button. Press the ◄ or ► button repeatedly to increase or decrease the Zoom effect. (x1 → x2 → x4) To move the enlarged photo image, press the ENTER button, then press the ▲/▼/◄/► buttons. Note that when the enlarged picture is smaller than the original screen size, the location change function doesn’t work. The enlarged file is not saved. If you have select “Zoom”, the “Rotate” deactivated. Zoom function information icon is displayed at the top right of the screen. Icon Current OSD Function x2 Zoom (x 2) Zoom-into a photo at 2x. x4 Zoom (x 4) Zoom-into a photo at 4x. x1 Zoom (x 1) Restore a photo to its original size. Pan Down Pan down to view the lower part of a zoomed-in photo. Pan Up Pan up to view the upper part of a zoomed-in photo. Pan Right Pan right to view the right side of a zoomed-in photo. Pan Left Pan left to view the left side of a zoomed-in photo. Slide Show Speed You can select the slide show speed. Press the ▲ or ▼ button to select “Slide Show Speed”. Press the ◄ or ► button to select the desired option. (Fast → Slow → Normal) You can select the SlideShow speed only during a slide show. Background Music If you set ”Background Music” to On, the background music will be played when viewing photos one by one or in a Slide Show. Press the ▲ or ▼ button to select “Background Music”. Press the ◄ or ► button to select “On” or “Off”. If you set ”Background Music” to On, a screen appears immediately where you can set the Background Music. On: When the background music is available, if you select On, the music is played back. To use this feature, there must be music and photo files stored on the USB device. Off: Background music is not played. • • ➣ ➣ ➣ ➣ ➣ ➣ TOOLS Stop Slide Show Rotate Zoom Slide Show Speed ◄ Normal ► Background Music : Off Background Music Setting Picture Mode : Standard Sound Mode : Custom Information Move Adjust e Exit TOOLS Stop Slide Show Rotate Zoom Slide Show Speed : Normal Background Music ◄ Off ► Background Music Setting Picture Mode : Standard Sound Mode : Custom Information Move Adjust e Exit nMove Enter Return x2 Zoom x2 BN68-01409H-00ENG.indb 55 2008-04-28 �� 5:18:40English - 6 Background Music Setting You can set the background music. Press the ▲ or ▼ button to select “Background Music Setting”, then press the ENTER button. If you turn off the “Background Music”, even if the “Background Music Settings” have been set up, the background music will not be played. Loading music files is needed to change BGM mode. Play music files in music category to load. “Background Music setting” menu is displayed. Press the ◄ or ► button to select the desired BGM (Background music) mode. (Shuffle, Selected file, Mood) Shuffle: Plays music files in random order. Selected file: Plays a selected music file. Mood: Plays music files of a particular mood only. • • • Selectig the background music file Press the ◄ or ► button to set “BGM Mode” to “Selected file”. Press the ▲ or ▼ button to select “Select Music File”, then press the ENTER button. Press the ▲ or ▼ button to select a music file, then press the yellow button. The mark appears to the left of the selected music. Repeat the above operation to select multiple music files. Press the ENTER button. Selecting the background music file mood Press the ◄ or ► button to set “BGM Mode” to “Mood”. Press the ▲ or ▼ button to select “BGM Mood”. Then press ◄ or ► button to select the desired BGM mood. Press the ENTER button. BGM mode option: Energetic, Rhythmical, Sad, Exciting, Calm WISELINK identifies the mood of the music files and groups them accordingly by analyzing the music files on the USB device. Picture Mode You can set the Picture mode. (Refer to page 25) Sound Mode You can set the Sound mode. (Refer to page 30) Information The photo file information including the order of the file in the current directory, the name, the size, the resolution, the date modified and the path is displayed. (Refer to page 52) Remove Safely You can remove the device safely from the TV. Press the ▲ or ▼ button to select “Remove Safely”, then press the ENTER button. Remove the USB device from the TV. ➣ ➣ ➣ ➣ ➣ ➣ Background Music setting BGM Mode ◄ Shuffle ► BGM Mood : Calm Select Music File Move Adjust Enter Return Background Music setting BGM Mode ◄ Selected file ► BGM Mood : Calm Select Music File Move Enter Return Background Music setting  Select Move Enter Return ../Music/ 2 File(s) Selected Music Thanks I Love You Better than yesterday ▼ Background Music setting BGM Mode : Mood BGM Mood ◄ Calm ► Select Music File Move Adjust Enter Return TOOLS Stop Slide Show Rotate Zoom Slide Show Speed : Normal Background Music : Off Background Music Setting Picture Mode : Standard Sound Mode : Custom Information Move Enter e Exit BN68-01409H-00ENG.indb 56 2008-04-28 �� 5:18:40English -  Using the Music List This menu shows MP3 files from among the files saved on a USB memory device. 1. Press the W.LINK button on the remote control to display the “WISELINK” menu. 2. Press the ◄ or ► button to select “Music”, then press the ENTER button. Music files are displayed. Press the (Play) / ENTER button over a music icon to play the music. To move to the previous / next group, press the (REW) or (FF) button. Screen Display Music SUM  Device  Favorites Setting  Select Jump Option Preference Title Artist Energetic ★ ★ ★ Jee Album 1 2005 Blues Thanks Sad ★ ★ ★ Darby Album 2 2005 Pop I Love You Calm ★ ★ ★ Catherine Album 3 2005 Pop Better than yesterday G H I J L P S T V ▲ 1File(s) Selected 4 5 2 3 1 6 1 Currently selected music Shows the currently selected music. 2 Current Sort Standard Press the ▲ or ▼ button to change the standard for sorting music files. (“Title”, “Artist”, “Mood”, “Genre”, “Folder”, “Preference”) 3 View Groups Shows the sorting groups. The sorting group including the currently selected music file is highlighted. 4 Current Device Shows the currently selected device name. Press the Red button to select a device. ➣ ➣ ➣ WISELINK Photo SUM  Device e Exit Music Setup MUSIC SUM 851.98MB/995.00MB Free Music SUM  Device  Favorites Setting  Select Jump Option Preference Title Artist Energetic ★ ★ ★ Jee Album 1 2005 Pop Thanks Sad ★ ★ ★ Darby Album 2 2005 Pop I Love You Calm ★ ★ ★ Catherine Album 3 2005 Pop Better than yesterday F G H I J L P S T V ▲ BN68-01409H-00ENG.indb 57 2008-04-28 �� 5:18:41English - 8 Sorting Music List You can sort music files in the Music List by a particular standard. 1. Press the W.LINK button on the remote control to display the WISELINK menu. 2. Press the ◄ or ► button to select “Music”, then press the ENTER button. Music files are displayed. 3. Press the ▲ or ▼ button to select a sorting standard. (“Title”, “Artist”, “Mood”, “Genre”, “Folder”, “Preference”) Music files are sorted according to the newly selected sorting standard. 4. Press the ENTER button to start playing music in the order selected by the user. Music information is set automatically and you can change the Favorite information. Music files for which information cannot be displayed are set to “Unclassified”. If there is no title information for a music file, the filename is displayed. If no information is available for the Genre, Artist, Album, or Year, the corresponding item is displayed as blank. Title Sorts music files by the title. It sorts the Music titles in alphabetical order, and shows the music file. 1. Select “Title” as the sorting standard in the Music List. 2. Press the ◄ or ► button to select from the sublist of files grouped in alphabetical order. To move to the previous / next group, press the (REW) or (FF) button. 3. Press the TOOLS button. 4. Press the ▲ or ▼ button to select “Play Current Group”. 5. Press ENTER to play the selected group of music files from the sublist. ➣ ➣ ➣ ➣ ➣ ➣ ➣ ➣ 5 Item Selection Information Shows the number of music files that are selected by pressing the Yellow button. 6 Help Items Red(Device) button: Selects a connected device. Green(Favorites Setting) button: Changes the favorites setting for the selected music. Press this button repeatedly until the desired value appears. (Refer to page 60) Yellow(Select) button: Selects music files from the music list. Selected m